Samsung | UN32J4000AK | Samsung 32'' HD Plano TV J4000A Series 4 Manual de Usuario

❑❑ Using the INFO button (Now & Next guide)
The display identifies the current channel and the status of certain audio-video
settings.
The Now & Next guide shows daily TV program information for each channel
according to the broadcasting time.
NN When you press the INFO button, a channel information banner will appear
on the top of the screen. And then press the ENTERE button, you can see
the details of the program.
●● Scroll ◄ ► to view information for a desired program while watching the
current channel.
●● Scroll ▲ ▼ to view information for other channels.
English
▶
❑❑ Memorizing channels
■■ Auto Tuning
OO MENUm → Broadcasting → Auto Tuning → ENTERE
Scans for a channel automatically and stores in the TV.
NN Automatically allocated program numbers may not correspond to actual
or desired program numbers. If a channel is locked, the PIN input window
appears.
◀
NN If the antenna is connected to ANT IN (CABLE), select Cable and if it is
connected to ANT IN (AIR), select Air. (depending on the country and model)
English
▶
When Antenna Source is set to Both, Air or Cable
When selecting Both: Provide a value to select both Air and Cable options.
When selecting Air: Provide a value to scan for Digital & Analog, Digital and
Analog channels.
When selecting Cable: Provide a value to scan for Analog channels.
–– Analog Cable System: Select the Analog Cable System among STD,
HRC and IRC by pressing the ▲ or ▼ button, then press the Scan.
◀
▶
English
■■ Antenna
OO MENUm → Broadcasting → Antenna → ENTERE
Before your television can begin memorizing the available channels, you must
specify the type of signal source that is connected to the TV (i.e. an Air or a
Cable system).
◀
▶
English
❑❑ Using the Channel menu
■■ Channel List
OO MENUm → Broadcasting → Channel List → ENTERE
The Channel List contains the channels your TV displays (added channels) when
you press the channel button. You can view channel information, All, TV, Analog
or Favorites 1-5. Press ►(Mode) button to change the channel mode.
◀
NN When you press the CH LIST button, Channel List screen is displayed at
once.
Channel Sorting
●● Number / Name: Arrange the channel order according to channel number or
name on the list.
English
▶
Channel Mode
●● Antenna: Switch between Air and Cable.
●● Edit Favorites: Set channels you watch frequently as favorites. Add or delete
the selected channel in Favorites 1-5.
NN For detailed information about using Edit Favorites, refer to “Edit
Favorites”.
●● Favorites 1-5: Show all favorite channels, arranged in up to five groups. Each
◀
group has a separate screen.
NN The TV displays Favorites 1-5 only if you have added favorites using Edit
Favorites.
●● All: Shows all currently available channels.
●● TV: Shows all currently available digital channels.
●● Analog: Shows all currently available analog channels.
English
▶
■■ Guide
OO MENUm → Broadcasting → Guide → ENTERE
The EPG (Electronic Program Guide) information is provided by broadcasters.
Using program schedules provided by broadcasters, you can specify programs
you want to watch in advance so that the channel automatically changes to the
selected program channel at the specified time. Program entries may appear
blank or out of date depending on a channel status.
●● a Red (Quick Nav): Viewing the TV programs on the list quickly using ◄/►
◀
buttons.
●● b Green (Channel Category): Select the type of channels you want to
display.
●● { Yellow (Schedule Manager): Moves to the reserved programs in Schedule
Manager.
English
▶
●● T (Tools) (depending on the country and model): Displays the option menu.
The option menu items that appear may differ depending on the channel
status and type.
–– Watch / Schedule Viewing
NN When selecting the current program, you can watch the selected
program.
NN When selecting the future program, you can reserve to watch the
◀
selected program. To cancel the schedule, press the ENTERE
button again and select Cancel Schedule.
–– More Info: Display details of the selected program.
English
▶
■■ Schedule Manager
OO MENUm → Broadcasting → Schedule Manager → ENTERE
You can set a desired channel to be displayed automatically at the intended time.
In addition, you can view, modify or delete a channel you have reserved to watch.
NN You must set the current time first using the Time → Clock function in the
System menu to use this function.
◀
1. Press the Schedule on the Schedule Manager screen. The Schedule
Viewing menu appears.
2. Press the ◄/►/▲/▼ buttons to set each option menu.
●● Antenna: Select the desired broadcasting signal.
●● Channel: Select the desired channel.
English
▶
●● Repeat: Select Once, Manual, Sat~Sun, Mon~Fri or Everyday. If you
select Manual, you can set the day you want.
NN A check (c) mark indicates a day you selected.
●● Date: You can set a desired date.
NN Date is available only when you select Once in Repeat.
●● Start Time: You can set the start time you want.
NN If you want to edit or cancel a reserved schedule, select the reserved
◀
schedule on Schedule Manager. Then press the ENTERE button and
select the Edit or Delete.
English
▶
■■ Edit Channel
OO MENUm → Broadcasting → Edit Channel → ENTERE
You can edit or delete channels.
Deleting a channel from the channel list
1 Go to Edit Channel screen.
◀
2. Press the ▲/▼ buttons to select the desired channel, and then press
ENTERE button. The (c) mark indicates the channel you’ve selected.
NN You can select more than one channel.
NN Press ENTERE button again to deselect the channel.
3.Press b (Delete) button. The selected channel has been deleted from the
channel list.
English
▶
Adding a channel to the channel list t
(analog channels only)
NN This function is only available in the Tools menu.
1. Press the TOOLS button on the screen, and then select Channel Add/
Delete.
2. Press the ▲/▼ button to select the deleted channel, and then select Add.
◀
▶
English
NN Using the colored and function buttons with the Edit Channel.
●● a Red (Change Number) (digital channels only): Changes channel order
on the channel list.
●● b Green (Delete): Deletes a channel from the channel list.
●● { Yellow (Lock / Unlock): Lock a channel so that the channel cannot be
selected and viewed. / Unlock the channel that you locked.
NN This function is available only when the Channel Lock is set to On.
NN The PIN input screen appears. Enter your 4-digit PIN, the default of
◀
which is “0-0-0-0”. Change the PIN using the Change PIN option.
●● } Blue (Select All / Deselect All): Selects or deselects all channels at
once.
●●
(Go To): Goes to channel directly by pressing numbers (0~9).
●● k (Page): Moves to next or previous page.
●● E (Done): Completes changing the channel order.
English
▶
●● T (Tools): Displays the option menu. The option menu items that appear
may differ depending on the channel status and type.
–– Sorting (digital channels only): Change the list ordered by channel
number or channel name.
–– Antenna: Select the desired broadcasting signal.
–– Category: Change the channel mode to All, TV, Analog, Recently
Viewed, Mostly Viewed. The selected channel mode is displayed.
◀
–– Edit Favorites: Go to Edit Favorites screen directly.
–– Rename Channel (analog channels only): Assign a name of up to five
characters to a channel. For example, Food, Golf, etc. This makes it
easier to find and select the channel.
–– Channel Info (digital channels only): Display details of the selected
channel.
–– Information: Display details of the selected program.
English
▶
■■ Edit Favorites t
OO MENUm → Broadcasting → Edit Favorites → ENTERE
You can add, edit or delete favorite channels.
Adding a channel to the Favorites 1-5
1. Go to Edit Favorites screen.
◀
2. Press the ▲/▼ buttons to select the desired channel, and then press
ENTERE button.
3. Choose a specific favorite list among Favorites 1-5 using b (Change Fav.)
button, and then press the } (Add) button. The selected channel has been
added in Favorites 1-5.
NN One favorites channel can be added in several of favorites among
Favorites 1-5.
English
▶
Deleting a channel from the Favorites 1-5
1. On the Edit Favorites screen, select the favorite list using b (Change Fav.)
button.
2. Move to favorite list, and then select the desired channel you want to delete.
◀
3. Press the } (Delete) button. The selected channel has been deleted from the
Favorites 1-5.
NN If you want to change the favorite channel order, press the a (Change
order) button and change the order using ▲/▼ buttons.
English
▶
NN Using the colored and function buttons with the Edit Favorites.
●● a Red (Category / Change order)
–– Category: Changes the channel mode to All, TV, Analog, Recently
Viewed, Mostly Viewed. The selected channel mode is displayed.
–– Change order: Changes the favorite channel order.
–– E (Done): Completes changing the channel order.
●● b Green (Change Fav.): Changes favorite list among Favorites 1-5.
●● { Yellow (Select All / Deselect All): Selects or deselects all channels at
◀
once.
●● } Blue (Add / Delete)
–– Add: Adds selected channels to Favorites 1-5.
–– Delete: Deletes the favorite channel from Favorites 1-5.
English
▶
●●
(Go To): Goes to channel directly by pressing numbers (0~9).
●● k (Page): Moves to next or previous page.
●● T (Tools): Displays the option menu. The option menu items that appear
may differ depending on the channel status and type.
–– Copy to Favorites: Edit the selected favorite channel in Favorites
1-5. You can add or delete from favorite list.
◀
–– Rename Favorites: Assign your own favorite channel name.
–– Antenna: Select the desired broadcasting signal.
–– Sorting (digital channels only): (depending on the country and model)
Change the list ordered by channel number or channel name.
–– Edit Channel: Go to Edit Channel screen directly.
–– Information: Display details of the selected program.
English
▶
❑❑ Locking Programs
■■ Channel Lock
OO MENUm → Broadcasting → Channel Lock → ENTERE
Lock channels to prevent unauthorized users, such as children, from watching
unsuitable program.
NN The PIN input screen appears. Enter your 4-digit PIN, the default of which is
“0-0-0-0”.
◀
▶
English
❑❑ Other Features
■■ Channel Settings
OO MENUm → Broadcasting → Channel Settings → ENTERE
●● Digital Manual Tuning
(digital channels only)
Scans for a digital channel manually and stores in the TV. Press the New
button to search the digital channels by adjusting the Channel or Frequency.
◀
NN If a channel is locked, the PIN input window appears.
NN Digital Manual Tuning is only available in digital TV mode.
●● Channel: Set the channel number using the ▲/▼ or number (0~9)
buttons.
●● Frequency: Set the frequency using the number buttons.
English
▶
●● Fine Tune
(analog channels only)
If the reception is clear, you do not have to fine tune the channel, as this is
done automatically during the search and store operation. If the signal is weak
or distorted, fine tune the channel manually.
NN Fine tuned channels that have been saved are marked with an asterisk “*”
on the right side of the channel number in the channel banner.
NN To reset the fine-tuning, select Reset.
◀
▶
English
●● Color System
(analog channels only)
Normally the TV can receive image and sound with good quality in Auto
mode. This mode detects the color signal sources automatically. If the color
implementation is unsatisfactory, select any of PAL-M, PAL-N or NTSC.
◀
▶
English
■■ Subtitle t
(digital channels only)
OO MENUm → Broadcasting → Subtitle → ENTERE
Use this menu to set the Subtitle mode.
NN The subtitle feature does not work in Component or HDMI modes.
●● Subtitle: Switches subtitles on or off.
Subtitle Mode: Sets the subtitle mode.
◀
Subtitle Language: Sets the subtitle language.
NN If the program you are watching does not support the Hearing Impaired
function, Normal automatically activates even if the Hearing Impaired
mode is selected.
NN English is the default in cases where the selected language is unavailable
in the broadcast.
●● Primary Subtitle: Sets the primary subtitle.
●● Secondary Subtitle: Sets the secondary subtitle.
English
▶
■■ Caption t
(On-Screen Text Messages) (analog channels only)
OO MENUm → Broadcasting → Caption → ENTERE
●● Caption: You can switch the caption function on or off. If captions are not
available, they will not be displayed on the screen.
NN The Caption feature does not work in Component or HDMI modes.
●● Caption Mode: You can select the desired caption mode.
◀
NN The availability of captions depends on the program being broadcasted.
Default / CC1~CC4 / Text1~Text4: (analog channels only) The Analog
Caption function operates in either analog TV channel mode or when a signal
is supplied from an external device to the TV. (Depending on the broadcasting
signal, the Analog Caption function may or may not work with digital
channels.)
English
▶
■■ Audio Options
OO MENUm → Broadcasting → Audio Options → ENTERE
●● Multi-Track Sound t
(analog channels only)
Mono: Choose for channels that are broadcasting in mono or if you are
having difficulty receiving a stereo signal.
Stereo: Choose for channels that are broadcasting in stereo.
◀
SAP: Choose to listen to the Separate Audio Program, which is usually a
foreign-language translation.
NN Depending on the particular program being broadcast, you can listen to
Mono, Stereo or SAP.
English
▶
●● Audio Language
(digital channels only)
Change the default value for audio languages.
Primary Audio / Secondary Audio: You can set the primary or secondary
audio.
NN The available language may differ depending on the broadcast.
●● Audio Format
(digital channels only)
◀
Select the audio format of current broadcasting. The available items may differ
depending on the broadcasting status.
English
▶
❑❑ Changing the Preset Picture Mode
■■ Picture Mode t
OO MENUm → Picture → Picture Mode → ENTERE
Select your preferred picture type.
NN When connecting a PC, you can only make changes to the Entertain and
Standard.
◀
●● Dynamic: Suitable for a bright room.
●● Standard: Suitable for a normal environment.
●● Natural: Reduces eye strain.
NN This function is only available on certain models in specific geographical
areas.
English
▶
●● Movie: Suitable for watching movies in a dark room.
●● Entertain: Suitable for watching movies and games.
NN It is only available when connecting a PC.
●● Stadium
When you set Soccer Mode (MENUm → Applications → Soccer Mode) to
On, both Picture Mode and Sound Mode are automatically set to Stadium.
The TV changes the picture and sound settings so that they are suitable for
soccer events.
◀
NN This function is only available on certain models in specific geographical
areas.
English
▶
❑❑ Adjusting Picture Settings
■■ Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/
R)
OO MENUm → Picture → Backlight → ENTERE
Your television has several setting options for picture quality control.
NN NOTE
◀
●● When connecting a PC, you can only make changes to Backlight,
Contrast, Brightness and Sharpness.
●● Settings can be adjusted and stored for each external device connected
to the TV.
●● Lowering picture brightness reduces power consumption.
English
▶
■■ Picture Size t
OO MENUm → Picture → Picture Size → ENTERE
Set the various picture options such as picture size and aspect ratio.
NN The available items may differ depending on the selected mode.
NN Depending on the input source, the picture size options may vary.
●● Picture Size t: Your cable box/satellite receiver may have its own set
◀
of screen sizes as well. However, we highly recommend you use 16:9 mode
most of the time.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnifies the picture size more than 4:3.
NN Adjust the Position by using ▲/▼ buttons in the Position screen.
Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.
NN Adjust the Zoom or Position by using ▲/▼ buttons in the Zoom/
Position screen.
English
▶
4:3: Sets the picture to basic (4:3) mode.
NN Do not watch in 4:3 format for a long time. Traces of borders displayed
on the left, right and center of the screen may cause image retention
(screen burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are input.
Custom: Magnifies or shrinks 16:9 pictures vertically and/or horizontally. A
magnified or shrunk picture can be moved left, right, up, and down.
◀
NN NOTE
●● The picture size can vary depending on the input resolution when content
is played using Videos under Media Play.
English
▶
●● Position: Adjust the picture position. It is only available in Screen Fit or Wide
Zoom.
●● Zoom/Position: Adjust the picture size and position.
NN This function is only available when Picture Size is set to Zoom or
Custom. However, you cannot change the picture position when the TV
is tuned to a digital channel and Picture Size is set to Custom.
NN NOTE
●● After selecting Screen Fit in HDMI (1080i/1080p) or Component
◀
(1080i/1080p) mode, you may need to center the picture. Select
Position, then follow the steps below in the Position screen.
1. Select the Position, press the ENTERE button.
2. Press the ▲/▼/◄ or ► button to move the picture.
3. Press the ENTERE button.
English
▶
●● If you want to reset the position you adjusted, select Reset in the
●●
●●
●●
●●
Position screen. The picture will be set to its default position.
Depending on the input source, the picture size options may vary.
The available items may differ depending on the selected mode.
When connecting a PC, only 16:9 and 4:3 modes can be adjusted.
Settings can be adjusted and stored for each external device connected
to an input on the TV.
◀
▶
English
■■ PIP
OO MENUm → Picture → PIP → ENTERE
You can watch the TV tuner and one external video source simultaneously. PIP
(Picture-in-Picture) does not function in the same mode.
NN NOTE
●● For PIP sound, refer to the Sound Select instructions.
●● If you turn the TV off while watching in PIP mode, the PIP window will
◀
disappear.
●● You may notice that the picture in the PIP window becomes slightly
unnatural when you use the main screen to view a game or karaoke.
English
▶
●● PIP Settings
Main picture
Sub picture
Component, HDMI1, HDMI2/DVI
TV
●● PIP: Activate or deactivate the PIP function.
●● Antenna: Select either Air or Cable as the input source for the sub-
◀
●●
●●
●●
●●
screen.
Channel: Select the channel for the sub-screen.
Size: Select a size for the sub-picture.
Position: Select a position for the sub-picture.
Sound Select: You can choose the desired sound (Main or Sub) in
PIP mode.
English
▶
❑❑ Changing the Picture Options
■■ Advanced Settings
OO MENUm → Picture → Advanced Settings → ENTERE
(available in Standard / Movie mode)
When connecting a PC, you can only make changes to the White Balance and
Gamma.
◀
●●
●●
●●
●●
Dynamic Contrast: Adjust the screen contrast.
Black Tone: Select the black level to adjust the screen depth.
Flesh Tone: Emphasize pink “Flesh Tone”.
RGB Only Mode: Displays the Red, Green and Blue color for making fine
adjustments to the hue and saturation.
English
▶
●● Color Space: Adjust the range of colors available to create the image.
●● White Balance: Adjust the color temperature for a more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each color’s (red, green, blue)
darkness.
R-Gain / G-Gain / B-Gain: Adjust each color’s (red, green, blue)
brightness.
Reset: Resets the White Balance to it’s default settings.
◀
▶
English
●● Gamma: Adjust the primary color intensity.
●● Motion Lighting: Reduce power consumption by brightness control adapted
motion.
NN When you change the Backlight, Contrast or Brightness, the TV sets
Motion Lighting to Off.
NN Only available in Standard mode.
◀
▶
English
■■ Picture Options
OO MENUm → Picture → Picture Options → ENTERE
NN When connecting a PC, you can only make changes to the Color Tone.
●● Color Tone: Adjusts the color tone.
NN Warm1 or Warm2 will be deactivated when the picture mode is
◀
Dynamic.
NN Settings can be adjusted and stored for each external device connected
to an input on the TV.
English
▶
●● Digital Clean View: If the broadcast signal received by your TV is weak, you
can activate the Digital Clean View feature to reduce any static and ghosting
that may appear on the screen.
NN When the signal is weak, try other options until the best picture is
displayed.
Auto Visualization: When changing analog channels, displays signal strength.
◀
NN Only available for analog channels.
NN When the INFO button is pressed, the signal strength bar is displayed.
NN When bar is green, you are receiving the best possible signal.
●● MPEG Noise Filter: Reduces MPEG noise to provide an improved picture
quality.
English
▶
●● HDMI Black Level: Selects the black level on the screen to adjust the screen
depth.
NN Available only in HDMI mode (RGB signals).
●● Film Mode: Sets the TV to automatically sense and process film signals from
◀
all sources and adjusts the picture for optimum quality.
NN Available in TV mode and external input mode which supports SD (480i /
576i) and HD (1080i) signals except in PC mode.
NN If the screen does not seem natural, change its option to Off / Auto1/
Auto2 in Film Mode.
English
▶
●● LED Clear Motion (Depending on the model): Removes drag from fast
scenes with a lot of movement to provide a clear picture.
NN It will be deactivated when the picture mode is set to Natural.
NN The screen may become slightly darker when you play LED Clear
Motion.
◀
▶
English
■■ Picture Off
OO MENUm → Picture → Picture Off → ENTERE
The screen is turned off but the sound remains on. Press any button except the
power key or volume button to turn on the screen.
◀
▶
English
■■ Reset Picture
OO MENUm → Picture → Reset Picture → ENTERE
Resets your current picture mode to its default settings.
❑❑ Changing the Preset Sound Mode
■■ Sound Mode
OO MENUm → Sound → Sound Mode → ENTERE
◀
NN If Speaker Select is set to External Speaker, Sound Mode is disabled.
●● Standard: Selects the normal sound mode.
●● Music: Emphasizes music over voices.
●● Movie: Provides the best sound for movies.
English
▶
●● Clear Voice: Emphasizes voices over other sounds.
●● Amplify: Increase the intensity of high-frequency sounds to allow a better
listening experience for the hearing impaired.
●● Stadium
When you set Soccer Mode (MENUm → Applications → Soccer Mode) to
On, Sound Mode is set to Stadium automatically so that the sound settings
are fixed at settings most suitable for sporting events.
NN This function is only available on certain models in specific geographical
◀
areas.
▶
English
❑❑ Adjusting Sound Settings
■■ Sound Effect
OO MENUm → Sound → Sound Effect → ENTERE
(standard sound mode only)
Use the up and down arrow keys to select an option, and then press ENTERE.
NN If Speaker Select is set to External Speaker, Sound Effect is disabled.
◀
●● DTS TruSurround HD
This function provides a virtual 5.1 channel surround sound experience
through a pair of speakers or headphones using HRTF (Head Related Transfer
Function) technology.
●● DTS TruDialog
This function allows you to increase the intensity of a voice over background
music or sound effects so that dialog can be heard more clearly.
English
▶
●● Equalizer
Use Equalizer to customize sound setting for each speaker.
Balance: Adjusts the balance between the right and left speaker.
100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the
level of specific bandwidth frequencies.
Reset: Resets the equalizer to its default settings.
◀
▶
English
■■ Speaker Settings
OO MENUm → Sound → Speaker Settings → ENTERE
●● Speaker Select
A sound echo may occur due to a difference in decoding speed between
the main speaker and the audio receiver. In this case, set the TV to External
Speaker.
NN When Speaker Select is set to External Speaker, the volume and
◀
MUTE buttons will not operate and the sound settings will be limited.
NN When Speaker Select is set to External Speaker, you should use these
settings.
●● TV Speaker: Off, External Speaker: On
NN When Speaker Select is set to TV Speaker, you should use these
settings.
●● TV Speaker: On, External Speaker: On
NN If there is no video signal, both speakers will be mute.
English
▶
●● Auto Volume
To equalize the volume level on each channel, set to Normal.
Night: This mode provides an improved sound experience compared to
Normal mode, making almost no noise. It is useful at night.
NN To use the volume control on the source device connected to the TV,
set Auto Volume to Off on the TV. Otherwise, a change to the volume
control of the source device may not be applied.
●● TV Installation Type
◀
Specify the TV's installation type. Choose between Wall Mount and Stand to
optimise the TV's sound automatically.
English
▶
■■ Additional Settings
OO MENUm → Sound → Additional Settings → ENTERE
●● DTV Audio Level (digital channels only): This function allows you to reduce
◀
the disparity of a voice signal (which is one of the signals received during a
digital TV broadcast) to a desired level.
NN According to the type of broadcast signal, MPEG/HE-AAC can be
adjusted between -10dB and 0dB.
NN To increase or decrease the volume, adjust between the range 0 and -10
respectively.
English
▶
●● Digital Audio Out
Digital Audio Out is used to provide digital sound, reducing interference going
to speakers and various digital devices such as a DVD player.
Audio Format: You can select the Digital Audio output format. The available
Digital Audio output format may differ depending on the input source.
NN By connecting to 5.1ch speakers in a dolby digital setup, maximize your
◀
interactive 3D sound experience.
Audio Delay: Correct audio-video mismatch, when watching TV or video,
and listening to digital audio output using an external device such as an AV
receiver (0ms ~ 250ms).
English
▶
●● Dolby Digital Comp (digital channels only): This function minimizes signal
disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio,
HE-AAC, ATV Sound).
NN This function is available only when the Audio Format is set to Dolby
Digital, Dolby Digital Plus, AAC, or HE-AAC.
NN Select Line to obtain dynamic sound, and RF to reduce the difference
between loud and soft sounds at night time.
Line: Set the output level for signals greater or less than -31dB (reference) to
either -20dB or -31dB.
◀
RF: Set the output level for signals greater or less than -20dB (reference) to
either -10dB or -20dB.
English
▶
■■ Reset Sound
OO MENUm → Sound → Reset Sound → ENTERE
Reset all sound settings to the factory defaults.
◀
▶
English
❑❑ Executing initial setup
■■ Setup
OO MENUm → System → Setup → ENTERE
Configure the channels and the time when setting up the TV for the first time or
when resetting the unit.
◀
NN Execute the initial setup following instructions that the TV guides.
NN Enter your 4-digit PIN, the default of which is 0-0-0-0.
English
▶
❑❑ Setting the Time
■■ Time
OO MENUm → System → Time → ENTERE
NN The current time will appear every time you press the INFO button.
●● Clock: Setting the clock is for using various timer features of the TV.
NN If you disconnect the power cord, you have to set the clock again.
◀
Clock Mode: Set up the current time manually or automatically.
- Auto: Set the current time automatically using the time from a digital
channel.
NN The antenna must be connected in order to set the time automatically.
English
▶
- Manual: Set the current time manually.
NN Depending on the broadcast station and signal, the auto time set up may
not be correct. In this case, set the time manually.
●● Clock Set: Set the Date and Time.
NN Available only when Clock Mode is set to Manual.
NN You can set the Date and Time directly by pressing the number
buttons on the remote control.
◀
▶
English
❑❑ Using the Sleep Timer
OO MENUm → System → Time → Sleep Timer → ENTERE
●● Sleep Timer t: Automatically shuts off the TV after a preset period of
time. (30, 60, 90, 120, 150 and 180 minutes).
NN To cancel the Sleep Timer, select Off.
◀
▶
English
❑❑ Setting the On/Off Timer
OO MENUm → System → Time → On Timer <or> Off Timer → ENTERE
●● On Timer: Three different on timer settings can be made. You must set the
clock first.
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
Manual to set at your convenience. If you select Manual, you can set up the
day you want to activate the timer.
◀
NN The c mark indicates the day you’ve selected.
Time: Set the hour, minute, am/pm.
Volume: Set the desired volume level.
English
▶
Source: To select the source of the content that will play when the TV turns
on. You can:
●● Select TV and have the TV display a specific air or cable channel.
●● Select USB and have the TV play back photo or audio files from a USB
◀
device.
●● Select a source on your TV that you have connected a set-top box to,
and have the TV display a channel from the set-top box.
NN The USB device must be connected to your TV before you can select
USB.
English
▶
NN If you select a source other than TV or USB, you must:
●● Have a cable or satellite set-top box attached to that source
●● Set the set-top box to the channel you want to watch when the TV
goes on
●● Leave the set-top box turned on.
NN When you select a source other than TV or USB, the Antenna and
Channel options will disappear.
◀
▶
English
Antenna (when the Source is set to TV): Select the desired broadcasting
signal.
Channel (when the Source is set to TV): Select the desired channel.
Music / Photo (when the Source is set to USB): Select a folder in the USB
device containing music or photo files to be played when the TV is turned on
automatically.
NN If there is no music file on the USB device or the folder containing a music
◀
file is not selected, the Timer function does not operate correctly.
NN When there is only one photo file in the USB, the Slide Show will not play.
English
▶
NN A folder with too long of a name cannot be selected.
NN Each USB you use is assigned its own folder. When using more than one
◀
of the same type of USB, make sure the folders assigned to each USB
have different names.
NN It is recommended that you use a USB memory stick and a multi card
reader when using On Timer.
NN The On Timer function may not work with USB devices with a built-in
battery, MP3 players, or PMPs made by some manufacturers because
these devices take a long time to be recognized.
English
▶
●● Off Timer: Three different off timer settings can be made. You must set the
clock first.
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
Manual to set at your convenience. If you select Manual, you can set up the
day you want to activate the timer.
NN The c mark indicates the day you’ve selected.
Time: Set the hour, minute, and am/pm.
◀
▶
English
❑❑ Economical Solutions
■■ Eco Solution
OO MENUm → System → Eco Solution → ENTERE
●● Energy Saving: This adjust the brightness of the TV in order to reduce power
consumption.
◀
▶
English
●● No Signal Power Off : Sets how quickly the TV switches to standby mode, if
no picture is being received.
NN Disabled when the PC is in power saving mode.
●● Auto Power Off: The TV will be automatically turned off when no user
operation is received for 4 hours.
NN If the Auto Power Off option is set to Off, the TV will stay on even if no
operations are performed on the TV.
◀
▶
English
❑❑ Other Features
■■ Menu Language
OO MENUm → System → Menu Language → ENTERE
Set the menu language.
1.Select Menu Language and press the ENTERE button.
2. Choose desired language and press the ENTERE button.
◀
▶
English
■■ Auto Protection Time
OO MENUm → System → Auto Protection Time → ENTERE
●● Auto Protection Time: If the screen remains idle with a still image for a certain
period of time defined by the user, the screen saver is activated to prevent the
formation of ghost images on the screen.
◀
▶
English
■■ General
OO MENUm → System → General → ENTERE
●● Game Mode: When connecting to a game console such as PlayStation™ or
Xbox™, you can enjoy a more realistic gaming experience selecting the game
menu.
NN NOTE
◀
●● Precautions and limitations for game mode
–– To disconnect the game console and connect another external
device, set Game Mode to Off in the setup menu.
–– If you display the TV menu in Game Mode, the screen shakes
slightly.
English
▶
●● Game Mode is not available when the input source is set to TV.
●● After connecting the game console, set Game Mode to On.
Unfortunately, you may notice reduced picture quality.
●● If Game Mode is On:
–– Picture Mode is set to Game and Sound Mode is set to Game.
●● Panel Lock: Lock or unlock all the keys on the panel.
●● Boot Logo: Enable/disable displaying the logo while the TV starts up.
●● AV Color System: Normally the TV can receive image and sound with good
◀
quality when in the mode Auto. This mode detects the signal color system
automatically. In case of some signal reception with color unsatisfactory,
select the AV Color System Mode to PAL-M, PAL-N or NTSC.
NN Available only in AV mode.
English
▶
■■ Change PIN
OO MENUm → System → Change PIN → ENTERE
The Change PIN screen will appear. Choose any 4 digits for your PIN and enter
it in the Enter New PIN. Re-enter the same 4 digits in the Confirm New PIN.
When the Confirm screen appears, press the ENTERE button. Your PIN has
been memorized.
NN The PIN input screen appears before the setup screen. Enter your 4-digit
PIN, the default of which is 0-0-0-0.
◀
NN If you forget the PIN code, press the remote control buttons in the following
sequence in Standby mode, which resets the PIN to “0-0-0-0” : MUTE → 8
→ 2 → 4 → POWER (on)
English
▶
■■ DivX® Video On Demand
OO MENUm → System → DivX® Video On Demand → ENTERE
Shows the registration code authorized for the TV. If you connect to the DivX
web site and register with 10-digit registration code, you can download the VOD
activation file. Once you play it using Media Play, the registration is completed.
NN For more information on DivX® VOD, visit “http://vod.divx.com”.
◀
▶
English
❑❑ Using the Source List
■■ Source List
OO MENUm → Applications → Source List → ENTERE
NN When you press the SOURCE button, Source screen will be displayed at
once.
NN You can only choose external devices that are connected to the TV. In
◀
Source, connected inputs are highlighted.
NN For the detailed information, refer to “Changing the Input Source” in User
Manual.
English
▶
❑❑ Using the Soccer Mode
■■ Soccer Mode
OO MENUm → Applications → Soccer Mode → ENTERE
This mode provides optimized condition for watching sports games.
●● a (Zoom): Pause playback and divide the picture into 9 parts. Select a part to
zoom it in.
◀
NN When the Soccer Mode is On, the picture and sound modes are set to
Stadium automatically.
NN If you turn the TV off while watching Soccer Mode, the Soccer Mode will be
disable.
English
▶
❑❑ Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo, music and movie files to the USB
port on the side of the TV.
3. When USB is connected to the TV, popup window appears. You can select
the Photos, Videos or Music directly.
◀
▶
English
NN It might not work properly with unlicensed multimedia files.
NN Need-to-Know List before using Media Contents
●● MTP (Media Transfer Protocol) is not supported.
●● Supported file systems are FAT and exFAT.
●● Certain types of USB Digital camera and audio devices may not be
◀
compatible with this TV.
●● Media Contents only supports sequential jpeg format.
●● Media Contents only supports USB Mass Storage Class (MSC) devices.
MSC is a Mass Storage Class Bulk-Only Transport device. Examples
of MSC are Thumb drives, Flash Card Readers (USB HUB are not
supported). Devices should be connected directly to the TV’s USB port.
English
▶
●● Before connecting your device to the TV, please back up your files to
●●
●●
●●
●●
◀
●●
prevent them from damage or loss of data. SAMSUNG is not responsible
for any data file damage or data loss.
Do not disconnect the USB device while it is loading.
The higher the resolution of the image, the longer it takes to display on
the screen.
The maximum supported JPEG resolution is 15360 x 8640 pixels.
For unsupported or corrupted files, the “Not Supported File Format”
message is displayed.
The scene search and thumbnail functions are not supported in the
Videos.
English
▶
●● MP3 files with DRM that have been downloaded from a non-free site
◀
cannot be played. Digital Rights Management (DRM) is a technology that
supports the creation, distribution and management of the content in an
integrated and comprehensive way, including the protection of the rights
and interests of the content providers, the prevention of the illegal copying
of contents, as well as managing billings and settlements.
●● PTP connection mode is fully available only with digital cameras. When
connecting a smartphone or tablet to the TV using PTP mode, it may not
be recognized. (depending on the country and model)
●● A USB device that requires high power (more than 500mA or 5V) may
not be supported. The HDD (Hard Disk Drive) connected to USB is not
supported.
●● If the TV has been no input during time set in Auto Protection Time, the
screen saver will run.
English
▶
●● The power-saving mode of some external hard disk drives may be
●●
●●
●●
◀
●●
released automatically when connected to the TV.
If a USB extension cable is used, the USB device may not be recognized
or the files on the device may not be read.
If a USB device connected to the TV is not recognized, the list of files on
the device is corrupted or a file in the list is not played, connect the USB
device to the PC, format the device and check the connection.
If a file deleted from the PC is still found when Media Contents is run, use
the “Empty the Recycle Bin” function on the PC to permanently delete the
file.
If the number of files and folders saved on a USB storage device is
approximately over 4000, the files and folders may not appear and some
folders may not be opened.
English
▶
Disconnecting a USB Device
1. Press the SOURCE button.
2. Select a desired USB device, and then press the TOOLS button. The Tools
menu appears.
3.Select Remove USB, and then wait until the selected USB device is
disconnected. You can remove a USB device from the TV.
NN To remove a USB device from the TV, we recommend use Remove USB
function.
◀
▶
English
❑❑ Using the Media Contents
OO MENUm → Applications → Media Play → ENTERE
Enjoy photos, music and movie files saved on a USB Mass Storage Class (MSC)
device.
1. Press the MEDIA.P button.
2.Press ◄/► button to select desired menu (Photos, Videos, Music), then
press the ENTERE button.
◀
3.Press ◄/► button to select desired device, then press the ENTERE button
again.
4. Press the ▲/▼/◄/► button to select the desired file in the list, then press the
ENTERE button or ∂ (Play) button.
English
▶
Playing the selected files
1. Press the ▲ button to select Options at the top of each main screen and
select Play Selected.
2. Select the desired files.
NN The check box appears to the left of the selected files.
NN Press ENTERE button again to deselect the file.
◀
3. Press the ▲ button to select Play.
NN You can select or deselect all files pressing the Select All / Deselect All.
English
▶
❑❑ Playing the Photos / Videos / Music
During playing a file, press the ▲/▼/◄/► button to select the desired menu.
NN When the option menu is not displayed, press the TOOLS button or
ENTERE button.
NN You can also use ∂/∑/∫/π/µ buttons on the remote control during
playback.
NN If you press the INFO button during playback, you can view the playback
◀
information.
▶
English
Playback menu
◀
Button
Operation
Photos
Videos
Music
/
Previous / Next
●
/
Start Slide Show / Stop Slide Show
●
Play / Pause
Mini Player*
●
●
/
Previous / Next
Mini Player*
●
●
/
Rewind / Fast forward
●
●
*When setting the Background Music to Mini Player in Photos, these buttons appear.
English
▶
Setting menu
●
Photos
Button
◀
Operation
Slideshow Settings
You can set the Speed and Effects during the slide show.
Zoom
You can zoom into images in full screen mode.
Rotate
You can rotate images in full screen mode.
Background Music /
Mini Player
You can set background music when watching a slide show. /
You can control simple playback menus.
Settings
Picture Mode / Sound Mode: You can adjust the picture or
sound setting.
Information: You can see detailed information about the played
file.
English
▶
NN During the slide show, all files in the file list will be displayed in order.
NN When you press the ∂ (Play) button (or ▲ button → Options → Slide Show)
in the file list, slide show will be started immediately.
NN During the slide show, you can adjust the slide show speed using π (REW)
or μ (FF) button.
●● Supported Photo Formats
NN For the details, refer to “Specifications” in User Manual.
◀
▶
English
●
Videos
Button
Operation
Search
Search Titles: You can move the other file directly.
Search Time bar: You can search the video using ◄ and ►
button at one minute interval or entering the number directly.
N It may not be supported depending on the input source.
◀
Repeat Mode
You can play movie files repeatedly.
Picture Size
You can adjust the picture size to your preference.
Settings
Subtitle Settings: You can play the video with subtitles. This
function only works if the subtitles are the same file name as the
video.
Picture Mode / Sound Mode: You can adjust the picture or
sound setting.
Audio Language: You can change the audio language if the video
has more than one language.
Information: You can see detailed information about the played
file.
English
▶
NN If video time information is unknown, play time and progress bar are not
displayed.
NN In this mode, you can enjoy movie clips contained on a Game, but you
cannot play the Game itself.
●● Supported Subtitle / Video Formats
NN For the details, refer to “Specifications” in User Manual.
◀
▶
English
●
Music
Button
Operation
Repeat
You can play music files repeatedly.
Shuffle
You can play the music randomly.
Sound Mode
You can adjust the sound setting.
N Only displays the files with supported music file extension. Other file
extensions are not displayed, even if they are saved on the same USB device.
◀
N If the sound is abnormal when playing music files, adjust the Equalizer in the ▶
Sound menu. (An over-modulated music file may cause a sound problem.)
● Supported Music Formats
N For the details, refer to “Specifications” in User Manual.
English
Setting the Encoding language
Set the encoding language if the text is not supported.
1. Press the ▲ button to select Options at the top of music main screen and
select Encoding.
2. Select the desired encoding language.
◀
▶
English
❑❑ Viewing the e-Manual
■■ e-Manual
OO MENUm → Support → e-Manual → ENTERE
You can read the introduction and instructions about the TV features stored in
your TV.
NN For the detailed information about e-Manual Screen, refer to “How to view the
e-Manual” in User Manual.
◀
▶
English
❑❑ Using the Self Diagnosis
■■ Self Diagnosis
OO MENUm → Support → Self Diagnosis → ENTERE
●● Picture Test: Use to check for picture problems.
Yes: If the test picture does not appear or there is noise in the test picture,
select Yes. There may be a problem with the TV. Contact Samsung’s Call
Center for assistance.
◀
No: If the test picture is properly displayed, select No. There may be a
problem with your external equipment. Please check your connections. If the
problem persists, refer to the external device’s user manual.
English
▶
●● Sound Test: Use the built-in melody sound to check for sound problems.
NN If you hear no sound from the TV’s speakers, before performing the
◀
sound test, make sure Speaker Select is set to TV Speaker in the
Sound menu.
NN The melody will be heard during the test even if Speaker Select is set to
External Speaker or the sound is muted by pressing the MUTE button.
Yes: If you can hear sound only from one speaker or not at all during the
sound test, select Yes. There may be a problem with the TV. Contact
Samsung’s Call Center for assistance.
No: If you can hear sound from the speakers, select No. There may be a
problem with your external equipment. Please check your connections. If the
problem persists, refer to the external device’s user manual.
English
▶
●● Signal Information: (digital channels only) An HD channel’s reception quality
is either perfect or the channels are unavailable. Adjust your antenna to
increase signal strength.
●● Reset: You can restore all TV settings to the factory defaults.
NN The PIN input screen appears before the setup screen.
NN Enter your 4-digit PIN. Change the PIN using the Change PIN option.
◀
▶
English
❑❑ Updating the Software
■■ Software Update
OO MENUm → Support → Software Update → ENTERE
The Software Update menu lets you upgrade your TV’s software to the latest
version.
NN When software is upgraded, video and audio settings you have made will
◀
return to their default settings. We advise you to write down your settings so
that you can easily reset them after the upgrade.
English
▶
●● Update now
–– By USB: Insert a USB drive containing the firmware upgrade file,
downloaded from “www.samsung.com” into the TV.
NN Please be careful not to disconnect the power or remove the USB
drive until upgrades are complete. The TV will be turned off and on
automatically after completing the firmware upgrade.
–– By Channel: Upgrade the software using the broadcasting signal.
NN If the function is selected during the software transmission period,
◀
software will be automatically searched and downloaded.
NN The time required to download the software is determined by the
signal status.
●● Auto Update: A manual upgrade will be automatically performed at selected
time. Since the power of the unit is turned on internally, the screen may be
turned on slightly for the product. This phenomenon may continue for more
than 1 hour until the software upgrade is complete.
English
▶
❑❑ Changing the Use Mode
■■ Use Mode
OO MENUm → Support → Use Mode → ENTERE
Select the Use Mode suitable for your place. We strongly recommend you select
Home Use.
NN If your TV has been unintentionally set to Store Demo, you can change the
mode with this option.
◀
●● Home Use: Home Use is the default setting.
●● Store Demo: Store Demo is for retail environments only. If you select Store
Demo, some functions will not work, and the picture settings will be reset
every 5 minutes.
English
▶
❑❑ Viewing the Contact Samsung
■■ Contact Samsung
OO MENUm → Support → Contact Samsung → ENTERE
View this information when your TV does not work properly or when you want to
upgrade the software. You can find information regarding our call centers, and
how to download products and software.
◀
English
Download PDF

advertising