Samsung | UN32D4003BM | Samsung 32'' D4003 HD LED TV Manual de Usuario

E-MANUAL
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model______________ Serial No.______________
Contents
Other Information
Channel Setting
Preference Features
• Using the INFO button (Now & Next guide) 1
• Setting the Time
44
• Troubleshooting
83
• Using Channel menu (Watch TV)
2
• Using the Sleep Timer
46
• Anti-theft Kensington Lock
100
• Memorizing channels
16
• Setting the On / Off Timer
47
• License
102
• Other Features
19
• Locking Programs
51
• Picture In Picture (PIP)
52
• Economical Solutions
54
• Other Features
56
• Support Menu
62
Basic Features
• Changing the Preset Picture Mode
20
• Adjusting Picture Settings
21
• Changing the Picture Options
27
• Changing the Preset Sound Mode
34
• Sound Settings
35
• Using the My Contents
69
• Selecting the Sound Mode
43
• Connecting a USB Device
70
• Screen Display
76
• Music
77
• Photos
79
• My Contents - Additional Functions
80
Advanced Features
❑❑ Using the INFO button (Now & Next guide)
The display identifies the current channel and the status of certain audio-video
settings.
The Now & Next guide shows daily TV program information for each channel
according to the broadcasting time.
●● Scroll ◄, ► to view information for a desired program while watching the
current channel.
●● Scroll ▲, ▼ to view information for other channels. If you want to move to the
currently selected channel, press the ENTERE button.
* It may differ depending on the model.
English
▶
❑ Using Channel menu (Watch TV)
O MENUm → Support → Contents Home →ENTERE
Press the CONTENT button to select Watch TV, then select the desired menu.
Each screen will be displayed.
■ Guide
◀
The EPG (Electronic Program Guide)
information is provided by broadcasters.
Using program schedules provided by
broadcasters, you can specify programs
you want to watch in advance so that
the channel automatically changes to
the selected program channel at the
specified time. Program entries may
appear blank or out of date depending
on a channel status.
English
Watch TV
Guide
Schedule Manager
▶
Channel List
Channel Manager
My Contents
Source
Using Guide
Guide
Mon,25 Jan 6:38 am
DTV Air 3 RCN MPEG4 HD
Home and Away
6:00 am - 6:30 am
3 RCN MPEG4 HD
ATLÉTICO MG X CORINTHIANS(HD)
Channel View - All
Today
6:00 am
1 Caracol MPEG2
JORNAL DA GLOBAL
2 RCN MPEG2
No Information
3 RCN MPEG4
Home and...
4 PRUEBA HD
No Information
5 QVC
No Information
▼ 6 R4DTT
No Information
◀
C
A
B
D
C
Schedule
Mgr
1
A
B
-24 DHours
2
C
A C BHours
A BD
+24
3
6:30 am
7:30 am
Tine Team
No Information
D
7:00 am
Fiv...
Ch.Mode j Information
4
* It may differ depending on the model.
English
5
Dark Angel
k Page
6
E Schedule
7
▶
1C
2A
C
3
A
◀
A
B
D
Red
(Schedule
Mgr): Moves to the Schedule List in Schedule Manager.
D
Green
(-24 Hours): Viewing the list of programs to be broadcasted before 24
hours.
B
C
A B
D Hours): Viewing the list of programs to be broadcasted after 24
Yellow
(+24
hours.
4
Blue (Ch.Mode): Select the type of channels you want to display on the Channel
List window. (All, TV, Radio, Data/Other, Favorites 1-5)
B
D
5 j (Information): Displays details of the selected program and let you make a
manual booking.
6 k (Page): Move to previous or next page.
7 E (Watch / Schedule)
●● When selecting the current program, you can watch the selected program.
●● When selecting the future program, you can reserve to watch the selected
program. To cancel the schedule, press the ENTERE button again and select
Cancel Schedules.
English
▶
■■ Schedule Manager
Cancel or set the Timer Viewing to display the channel you want at the intended
time.
Using Timer Viewing
You can set a desired channel to be displayed automatically at the intended time.
Set the current time first to use this function.
1. Press the ENTERE button to add program to schedule manually.
◀
2. Press the ◄/►/▲/▼ button to set the Antenna, Channel, Repeat, Date,
Start Time.
●● Antenna: Select the desired broadcasting signal.
●● Channel: Select the desired channel.
English
▶
●● Repeat: Select Once, Manual, Sat~Sun, Mon~Fri or Everyday to set at
your convenience. If you select Manual, you can set the day you want.
NN The (c) mark indicates the day you’ve selected.
●● Date: You can set the desired date.
NN It is available when you select Once in Repeat.
●● Start Time: You can set the start time you want.
NN If you want to edit or cancel the schedule, select the reserved schedule on
◀
the Schedule List, and select the Edit or Cancel Schedules.
English
▶
■■ Channel List
You can view channel information, All,
TV, Radio, Data/Other, Analog or
Favorites 1-5.
button on the remote control,
Channel List screen will be
displayed at once.
●● All: Shows all currently available
channels.
●●
●●
●●
●●
●●
All
a 1
Air
a 2
Air
3
Air
Air
Air
Air
Air
Air
Air
a
a
a
a
a
a
a
NN When you press the CH LIST
◀
Channel List
4
5
6
7
8
9
Air
C
C DProgram
A B View L
D Ch.Mode E Watch k Page
A Antenna
B
* It may differ depending on the model.
TV: Shows all currently available TV channels.
Radio: Shows all currently radio channels.
Data/Other: Shows all currently available MHP or other channels.
Analog: Shows all currently available analog channels.
Favorites 1-5: Shows all favorite channels.
English
▶
NN Favorites 1-5 will be displayed when you set Add to Favorites.
NN If you want to view favorite channels you added, press the CH LIST button
and use L (Ch.Mode) button to move Favorites 1-5.
NN Using the color buttons with the Channel List.
●C●
●●
◀
A
B
D
Red
(Antenna):
Switches to Air or Cable.
A B
D
Yellow
(Program
View /Channel View): Displays the program when
digital channel is selected. Returns to the channel view.
C
●● L (Ch.Mode / Channel): Move to the All, TV, Radio, Data/Other or
Favorites 1-5 / Change channels.
NN When you press the
A B
DView) button, you can move to
(Program
other channels using L (Channel) button.
C
English
▶
●● E (Watch / Information): Watches the channel you select. / Displays
details of the selected program.
●● k (Page): Move to next or previous page.
Channel Status Display Icons
Icon
◀
Operations
a
An analog channel.
)
A reserved program.
\
A locked channel.
English
▶
How to use Timer Viewing in Channel List (digital channels only)
When you set the Timer Viewing in Channel List, you can only set the program in
Program View.
1. Press the CH LIST button, then select a desired digital channel.
2. Press the
C
A B
DView) button.
(Program
3.Press the ▲ / ▼ buttons to select the desired program, then press the
ENTERE (Information) or INFO button.
◀
4. Select Timer Viewing, then press the ENTERE button when done.
NN If you want to cancel Timer Viewing, follow steps 1 through 3. Select Cancel
Schedules.
English
▶
■ Channel Manager
You can edit the channel to your preference.
● (
) Channels: Shows the channel
list according to the channel type.
Channel Manager
● (
) Favorites 1-5: Shows favorite
channels.
N Using the color buttons with the
Channel Manager.
B
D
●C A Red
(Antenna):
Switches to
Air or Cable.
◀
C
A
B
●
Air
C
Added Ch.
Seclected item: 2
a
a
a
3
---- Air
4
---- Air
11
---- Air
12
---- Air
---- Air
a
a
a
5
a
6
13
---- Air
---- Air
a
14
---- Air
a
a
7
---- Air
a
15
---- Air
8
---- Air
a
16
---- Air
a
a
9
---- Air
---- Air
---- Air
a
a
17
10
18
---- Air
A Antenna
B C D
A
B
English
k Pages E Select T Tools R Return
* It may differ depending on the model.
Blue (Sorting): Changes the
list ordered by channel number or channel name.
D
D Sorting
1/1 page
Channel number
▶
Channel Status Display Icons
Icon
◀
Operations
a
An analog channel.
c
A channel selected.
F
A channel set as a Favorites.
\
A locked channel.
T
Displays the Channel Manager option menu.
Channel Manager Option Menu t
Set each channel using the Channel Manager menu options (Watch, Add to
Favorites/Edit Favorites, Lock/Unlock, Channel Name Edit , Edit Channel
Number, Delete, Deselect All/Select All). Option menu items may differ depending
on the channel status.
English
▶
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
●● Watch: Watch the selected channel.
●● Add to Favorites/Edit Favorites: Set channels you watch frequently as Favorites.
/ Add or Delete the selected channel in Favorites 1-5.
1.
Select the Add to Favorites/Edit Favorites, then press the ENTERE
button. Add or Delete the selected channel in Favorites 1-5.
NN If the channel is already added to favorite channel, Edit Favorites will be ▶
◀
shown.
2.
Press the ENTERE button to select Favorites 1-5, then press the OK
button.
NN One favorite channel can be added in several of Favorites among
Favorites 1-5.
English
●● Lock/Unlock: Lock a channel so that the channel cannot be selected and viewed.
NN NOTE
●● This function is available only when the Channel Lock is set to On.
●● The PIN input screen appears. Enter your 4-digit PIN, the default of which
is “0-0-0-0”. Change the PIN using the Change PIN option.
●● Channel Name Edit (analog channels only): Assign your own channel name.
●● Edit Channel Number: Edit the number by pressing the number buttons desired.
◀
NN Some area may not be able to support Channel Name Edit and Edit
Channel Number function.
English
▶
●● Delete: Delete or add a channel to display the channels you want.
●● Deselect All: Deselect all the selected channels.
NN You can only select Deselect All when one or more channels are selected.
●● Select All: Select all the channels in the channel list.
◀
▶
English
❑❑ Memorizing channels
OO MENUm → Channel → ENTERE
■■ Antenna (Air / Cable) t
Before your television can begin memorizing the available channels, you must
specify the type of signal source that is connected to the TV (i.e. an Air or a
Cable system).
◀
▶
English
■■ Auto Tuning
Scans for a channel automatically and stores in the TV.
NN Automatically allocated program numbers may not correspond to actual
or desired program numbers. If a channel is locked, the PIN input window
appears.
NN If the antenna is connected to ANT 2 IN (CABLE), select Cable and if it is
connected to ANT 1 IN (AIR), select Air.
When Antenna Source is set to Air or Cable:
◀
When selecting Air: Provide a value to scan for Digital and Analog channels.
When selecting Cable: Provide a value to scan for Analog channels.
–– Analog Cable System: Select the Analog Cable System among STD,
HRC, and IRC by pressing the ▲, ▼, ◄ or ► button, then press the
Search button.
English
▶
■■ Digital Manual Tuning
C A (New)
B
D
Scans for a digital channel manually and stores in the TV. Press the
button to search the digital channels by adjusting the Channel or Frequency.
NN If a channel is locked, the PIN input window appears.
NN Digital Manual Tuning is only available in digital TV mode.
●● Channel: Set the channel number using the ▲, ▼ or number (0~9)
buttons.
◀
●● Frequency: Set the frequency using the number buttons.
■■ Channel Add/Delete t
(analog channels only)
You can delete or add a channel to display the channels you want. This function
is only available in the Tools menu.
English
▶
❑❑ Other Features
■■ Fine Tune
(analog channels only)
If the reception is clear, you do not have to fine tune the channel, as this is done
automatically during the search and store operation. If the signal is weak or
distorted, fine tune the channel manually.
●● Select Fine Tune in the Channel menu.
◀
NN Fine tuned channels that have been saved are marked with an asterisk “*” on
the right-hand side of the channel number in the channel banner.
NN To reset the fine-tuning, select Reset.
■■ LNA (Off / On)
If the TV is operating in a weak-signal area, the LNA (Low Noise Amplifier) function
can improve the reception (a low-noise preamplifier boosts the incoming signal).
English
▶
❑❑ Changing the Preset Picture Mode
OO MENUm → Picture → Picture Mode → ENTERE
■■ Picture Mode t
Select your preferred picture type.
NN When connecting a PC, you can only make changes to the Entertain and
Standard.
◀
●●
●●
●●
●●
●●
Dynamic: Suitable for a bright room.
Standard: Suitable for a normal environment.
Natural for LCD and LED 5 series 40 inches : Suitable for reducing eye strain.
Movie: Suitable for watching movies in a dark room.
Entertain: Suitable for watching movies and games.
NN It is only available when connecting a PC.
English
▶
❑❑ Adjusting Picture Settings
■■ Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)
Your television has several setting options for picture quality control.
NN NOTE
●● When you make changes to Backlight, Contrast, Brightness,
Sharpness, Color or Tint (G/R), the screen will be adjusted accordingly.
●● When connecting a PC, you can only make changes to Backlight,
◀
Contrast, Brightness and Sharpness.
●● Settings can be adjusted and stored for each external device connected
to the TV.
●● Lowering picture brightness reduces power consumption.
English
▶
■■ Screen Adjustment
Set the various picture options such as picture size and aspect ratio.
●● Picture Size: Your cable box/satellite receiver may have its own set of screen
sizes as well. However, we highly recommend you use 16:9 mode most of the
time.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnifies the picture size more than 4:3.
NN Adjusts the Position by using ▲, ▼ buttons in the Position screen.
◀
Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.
NN Adjusts the position or size by using ▲, ▼ buttons in the Zoom/Position
screen.
English
▶
4:3: Sets the picture to basic (4:3) mode.
NN Do not watch in 4:3 format for a long time. Traces of borders displayed
on the left, right and center of the screen may cause image retention
(screen burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are input.
◀
Smart View1
50%.
for LED 5 series 40 inches and LCD 5 series
: Reduces original screen by
Smart View2
25%.
for LED 5 series 40 inches and LCD 5 series
: Reduces original screen by
NN NOTE
●● Smart View1 is enabled only in HDMI mode.
●● Smart View2 is enabled only in DTV and HDMI modes.
English
▶
●● Position: Adjust the picture position. It is only available in Zoom1, Zoom2 or
Wide Fit.
NN After selecting Zoom1, Zoom2 or Wide Fit, select Position. Follow the
steps below in the Position screen.
1. Select the Position, press the ENTERE button.
2. Press the ▲ or ▼ button to move the picture up or down.
3. Press the ENTERE button.
◀
▶
English
NN After selecting Screen Fit in HDMI (1080i/1080p) or Component
(1080i/1080p) mode, you may need to center the picture. Select
Position, then follow the steps below in the Position screen.
1. Select the Position, press the ENTERE button.
2. Press the ▲, ▼, ◄ or ► button to move the picture.
3. Press the ENTERE button.
NN If you want to reset the position you adjusted, select Reset in the
◀
Position screen. The picture will be set to its default position.
●● Depending on the input source, the picture size options may vary.
English
▶
●● The available items may differ depending on the selected mode.
●● When connecting a PC, only 16:9 and 4:3 modes can be adjusted.
●● Settings can be adjusted and stored for each external device connected
to an input on the TV.
●● If you use the Screen Fit function with HDMI 720p input, 1 line will be cut
at the top, bottom, left and right as in the overscan function.
Input Source
◀
Picture Size
ATV/AV
16:9, Wide Zoom, Zoom, 4:3
DTV(720p, 1080i, 1080p)
Component(1080i, 1080p)
HDMI(720p, 1080i, 1080p)
English
16:9, Wide Zoom, Zoom, 4:3, Screen Fit
▶
❑ Changing the Picture Options
■ Advanced Settings
O MENUm → Picture → Advanced Settings → ENTERE
(available in Standard / Movie mode)
Compared to previous models, new Samsung TVs have more precise pictures.
N When connecting a PC, you can
◀
Advanced Settings
only make changes to Gamma and
White Balance.
● Black Tone (Off / Dark / Darker /
Darkest): Select the black level to
adjust the screen depth.
►
Black Tone
: Off
Dynamic Contrast
: Medium
Shadow Detail
:0
Gamma
:0
RGB Only Mode
: Off
Color Space
: Native
White Balance
▼
U Move
•
English
E Enter
R Return
The displayed image may diifer depending on the
model.
▶
●●
●●
●●
●●
Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast.
Shadow Detail: Increase the brightness of dark images.
Gamma: Adjust the primary color intensity.
RGB Only Mode (Off / Red / Green / Blue): Displays the Red, Green and
Blue color for making fine adjustments to the hue and saturation.
●● Color Space (Auto / Native): Adjust the range of colors available to create
the image.
◀
▶
English
●● White Balance: Adjust the color temperature for a more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each color’s (red, green, blue)
darkness.
R-Gain / G-Gain / B-Gain: Adjust each color’s (red, green, blue) brightness.
Reset: Resets the White Balance to its default settings.
●● Flesh Tone: Emphasize pink “Flesh Tone”.
●● Edge Enhancement (Off / On): Emphasize object boundaries.
●● Motion Lighting (Off / On): Reduce power consumption by brightness
◀
control adapted motion.
NN When changing a setting value of Backlight, Contrast, Brightness,
Motion Lighting will be set to Off.
●● LED Motion Plus (Off / On) for LED 5 series 40 inches : Reduce power
consumption by brightness control adapted motion.
English
▶
■ Picture Options
O MENUm → Picture → Picture Options → ENTERE
N When connecting a PC, you can only make changes to the Color Tone.
● Color Tone (Cool / Standard /
Picture Options
Warm1 / Warm2)
N Warm1 or Warm2 will be
◀
deactivated when the picture
mode is Dynamic.
Color Tone
: Standard
Digital Noise Filter
: Auto
MPEG Noise Filter
: Auto
HDMI Black Level
: Normal
Film Mode
: Off
►
▶
N Settings can be adjusted and
stored for each external device
connected to an input on the TV.
U Move
•
English
E Enter
R Return
The displayed image may diifer depending on the
model.
●● Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualization):
If the broadcast signal received by your TV is weak, you can activate the
Digital Noise Filter feature to reduce any static and ghosting that may appear
on the screen.
NN When the signal is weak, try other options until the best picture is
displayed.
Auto Visualization: When changing analog channels, displays signal strength.
NN Only available for analog channels.
◀
NN When bar is green, you are receiving the best possible signal.
●● MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG
noise to provide an improved picture quality.
English
▶
●● HDMI Black Level (Low / Normal): Selects the black level on the screen to
adjust the screen depth.
NN Available only in HDMI mode (RGB signals).
●● Film Mode (Off / Auto1 / Auto2): Sets the TV to automatically sense and
process film signals from all sources and adjusts the picture for optimum
quality.
NN Available in ATV, AV, COMPONENT (1080i) and HDMI (1080i).
◀
NN If the screen does not seem natural, change its option to Off/ Auto1/
Auto2 in Film Mode.
English
▶
■■ Reset Picture (OK / Cancel)
Resets your current picture mode to its default settings.
◀
▶
English
❑❑ Changing the Preset Sound Mode
OO MENUm → Sound → Sound Mode → ENTERE
■■ Sound Mode t
◀
●●
●●
●●
●●
●●
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Movie: Provides the best sound for movies.
Clear Voice: Emphasizes voices over other sounds.
Amplify: Increase the intensity of high-frequency sound to allow a better
listening experience for the hearing impaired.
English
▶
❑❑ Sound Settings
OO MENUm → Sound → Sound Effect → ENTERE
■■ Sound Effect
(standard sound mode only)
Use the ▲ and ▼ arrow keys to select an option, and then press ENTERE
●● SRS TruSurround HD (Off / On) t
◀
This function provides a virtual 5.1 channel surround sound experience
through a pair of speakers or headphones using HRTF (Head Related Transfer
Function) technology.
●● SRS TruDialog (Off / On)
This function allows you to increase the intensity of a voice over background
music or sound effects so that dialog can be heard more clearly.
English
▶
●● Equalizer
Use Equalizer to customize sound setting for each speaker.
Balance: Adjusts the balance between the right and left speaker.
100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the
level of specific bandwidth frequencies.
Reset: Resets the equalizer to its default settings.
◀
▶
English
❑❑ Adjusting Sound Settings
■■ Broadcast Audio Options
●● Multi-Track Sound (MTS) t
(analog channels only)
Mono: Choose for channels that are broadcasting in mono or if you are
having difficulty receiving a stereo signal.
Stereo: Choose for channels that are broadcasting in stereo.
◀
SAP: Choose to listen to the Separate Audio Program, which is usually a
foreign-language translation.
NN Depending on the particular program being broadcast, you can listen to
Mono, Stereo or SAP.
English
▶
●● Audio Language t
(digital channels only)
Change the default value for audio languages.
NN The available language may differ depending on the broadcast.
●● Audio Format (MPEG)
(digital channels only)
Select the audio format.
◀
▶
English
■■ Additional Settings
(digital channels only)
●● DTV Audio Level (MPEG / HE-AAC): This function allows you to reduce the
disparity of a voice signal (which is one of the signals received during a digital
TV broadcast) to a desired level.
NN According to the type of broadcast signal, MPEG/HE-AAC can be
adjusted between -10dB and 0dB.
NN To increase or decrease the volume, adjust between the range 0 and -10
◀
respectively.
▶
English
●● Dolby Digital Comp (Line / RF): This function minimizes signal disparity
between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC,
ATV Sound).
NN Select Line to obtain dynamic sound, and RF to reduce the difference
between loud and soft sounds at night time.
Line: Set the output level for signals greater or less than -31dB (reference) to
either -20dB or -31dB.
◀
RF: Set the output level for signals greater or less than -20dB (reference) to
either -10dB or -20dB.
English
▶
■■ Speaker Settings
●● Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
Night: This mode provides an improved sound experience compared to
Normal mode, making almost no noise. It is useful at night.
NN To use the volume control on the source device connected to the TV as
shown below, set Auto Volume to Off on the TV. Otherwise, a change to
the volume control of the source device may not be applied.
◀
▶
English
■■ Reset Sound (OK / Cancel)
Resets your current sound mode to its default settings.
◀
▶
English
❑❑ Selecting the Sound Mode t
When you set to Dual I-II, the current sound mode is displayed on the screen.
A2 Stereo
◀
NICAM Stereo
Audio Type
Dual I-II
Mono
Mono
Stereo
Stereo ↔ Mono
Dual
Dual I ↔ Dual II
Mono
Mono
Stereo
Mono ↔ Stereo
Mono → Dual I
Dual
 Dual II 
Default
Automatic change
Dual I
Automatic change
Dual I
NNIf the stereo signal is weak and an automatic switching, occurs, then switch to
the mono.
NNOnly activated in stereo sound signal.
NNOnly available when the Source is set to TV.
NNDual I-II is only available when pressing TOOLS button(digital channels only).
English
▶
❑❑ Setting the Time
OO MENUm → System → Time → ENTERE
■■ Time
NN The current time will appear every time you press the INFO button.
●● Clock: Setting the clock is for using various timer features of the TV.
NN If you disconnect the power cord, you have to set the clock again.
◀
Clock Mode: Set up the current time manually or automatically.
- Auto: Set the current time automatically using the time from a digital
channel.
NN The antenna must be connected in order to set the time automatically.
English
▶
- Manual: Set the current time manually.
NN Depending on the broadcast station and signal, the auto time set up may
not be correct. In this case, set the time manually.
Clock Set: Set the Day, Month, Year, Hour, Minute and am/pm.
NN Available only when Clock Mode is set to Manual.
NN You can set the day, month, year, hour and minute directly by pressing
the number buttons on the remote control.
◀
▶
English
❑❑ Using the Sleep Timer
OO MENUm → System → Time → Sleep Timer → ENTERE
●● Sleep Timer t: Automatically shuts off the TV after a preset period of time.
(30, 60, 90, 120, 150 and 180 minutes).
NN To cancel the Sleep Timer, select Off.
◀
▶
English
❑❑ Setting the On/Off Timer
OO MENUm → System → Time →On Timer <or> Off Timer →ENTERE
●● On Timer: Three different on timer settings
On Timer 1
can be made. You must set the clock first.
◀
Setup: Select Off, Once, Everyday,
Mon~Fri, Mon~Sat, Sat~Sun or Manual
to set at your convenience. If you select
Manual, you can set up the day you want
to activate the timer.
Setup
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Once
On Time
04
Source
TV
Volume
00
am
Antenna
Channel
Air
20
3
NN The c mark indicates the day
you’ve selected.
L Move U Adjust E Enter R Return
• The displayed image may diifer depending on the
model.
English
▶
◀
On Time: Set the hour, minute am/pm.
Volume: Set the desired volume level.
Source: Select TV or USB content to be played when the TV is turned on
automatically. (USB can be selected only when a USB device is connected to the
TV)
Antenna (when the Source is set to TV): Select the desired broadcasting signal.
Channel (when the Source is set to TV): Select the desired channel.
Music / Photo (when the Source is set to USB): Select a folder in the USB
device containing music or photo files to be played when the TV is turned on
automatically.
English
▶
NN Note
●● If there is no music file on the USB device or the folder containing a music
file is not selected, the Timer function does not operate correctly.
●● When there is only one photo file in the USB, the Slide Show will not play.
●● If a folder with a too long name cannot be selected.
●● Each USB you use is assigned its own folder. When using more than one
of the same type of USB, make sure the folders assigned to each USB
have different names.
◀
●● It is recommended that you use a USB memory stick and a multi card
reader when using On Timer.
●● The On Timer function may not work with USB devices with a built-in
battery, MP3 players, or PMPs made by some manufacturers because
these devices take a long time to be recognized.
English
▶
●● Off Timer: Three different off timer settings
can be made. You must set the clock first.
Setup: Select Off, Once, Everyday,
Mon~Fri, Mon~Sat, Sat~Sun or Manual
to set at your convenience. If you select
Manual, you can set up the day you want
to activate the timer.
NN The c mark indicates the day
◀
Off Timer 1
Setup
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Once
Off Time
04
00
am
L Move U Adjust E Enter R Return
you’ve selected.
The displayed image may diifer depending on the
•
Off Time: Set the hour, minute and am/pm.
model.
English
▶
❑❑ Locking Programs
OO MENUm → System → Security → ENTERE
■■ Security
NN The PIN input screen appears before the setup screen.
NN Enter your 4-digit PIN, the default of which is 0-0-0-0. Change the PIN using
◀
the Change PIN option.
●● Channel Lock (Off / On): Lock channels in Channel Manager, to prevent
unauthorized users, such as children, from watching unsuitable program.
●● Change PIN: The Change PIN screen will appear. Choose any 4 digits for
your PIN and enter it in the Enter New PIN. Re-enter the same 4 digits in the
Confirm New PIN. When the Confirm screen appears, press the OK button.
Your PIN has been memorized.
NN If you forget the PIN, press the remote-control buttons in the following
sequence, which resets the pin to “0-0-0-0” : POWER (off) → MUTE →
8 → 2 → 4 → POWER (on)
English
▶
❑❑ Picture In Picture (PIP)
OO MENUm → System → PIP → ENTERE
■■ PIP t
You can watch the TV tuner and one external video source simultaneously. PIP
(Picture-in-Picture) does not function in the same mode.
NN NOTE
◀
●● For PIP sound, refer to the Sound Select instructions.
●● If you turn the TV off while watching in PIP mode, the PIP window will
disappear.
●● You may notice that the picture in the PIP window becomes slightly
unnatural when you use the main screen to view a game or karaoke.
English
▶
●● PIP Settings
Main picture
Sub picture
Component, HDMI
TV
●● PIP (Off / On): Activate or deactivate the PIP function.
●● Air/Cable (Air / Cable): Select either Air or Cable as the input source for
the sub-screen.
◀
●●
●●
●●
●●
Channel: Select the channel for the sub-screen.
Size (Õ / Ã): Select a size for the sub-picture.
Position (à / – / — / œ): Select a position for the sub-picture.
Sound Select (Main / Sub): You can choose the desired sound (Main or
Sub) in PIP mode.
English
▶
❑❑ Economical Solutions
■■ Eco Solution
●● Energy Saving (Off / Low / Medium / High / Picture Off)t: This
adjust the brightness of the TV in order to reduce power consumption. If you
select Picture Off, the screen is turned off, but the sound remains on. Press
any button except volume button to turn on the screen.
●● Eco Sensor (Off / On)
◀
: To enhance your
power savings; the picture settings will automatically adapt to the light in the
room.
for LED 5 series 40 inches, and LCD 5 series
NN If you adjust the Backlight, the Eco Sensor will be set to Off.
Min Backlight: When Eco sensor is On, the minimum screen brightness can
be adjusted manually.
NN If Eco Sensor is On, the display brightness may change (become slightly
darker or brighter) depending on the surrounding light intensity.
English
▶
●● No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets how quickly
the TV switches to standby mode, if no picture is being received.
●● Auto Power Off (Off / On): The TV will be automatically turned off when no
user operation is received for 4 hours.
◀
▶
English
❑❑ Other Features
OO MENUm → System → ENTERE
■■ Language
●● Menu Language: Set the menu language.
1. Select Menu Language and press the ENTERE button.
2. Choose desired language and press the ENTERE button.
◀
NN Choose between English, Português and Español.
●● Preference (Primary Audio Language / Secondary Audio Language /
Primary Subtitle Language / Secondary Subtitle Language): Select a
language, which will be the default language when a channel is selected.
English
▶
■■ Subtitle
(digital channels only)
Use this menu to set the Subtitle mode.
NN The subtitle feature does not work in Component or HDMI modes.
●● Subtitle (Off / On): Switches subtitles on or off.
●● Mode (Normal / Hearing Impaired) : Sets the subtitle mode.
●● Subtitle Language: Sets the subtitle language.
◀
NN If the program you are watching does not support the Hearing Impaired
function, Normal automatically activates even if the Hearing Impaired
mode is selected.
NN English is the default in cases where the selected language is unavailable
in the broadcast.
English
▶
■■ Caption
(On-Screen Text Messages) (analog channels only)
●● Caption (Off / On): You can switch the caption function on or off. If captions
are not available, they will not be displayed on the screen.
NN The Caption feature does not work in Component, HDMI or HDMI/DVI
modes.
●● Caption Mode: You can select the desired caption mode.
NN The availability of captions depends on the program being broadcasted.
◀
Default / CC1~CC4 / Text1~Text4: (analog channels only) The Analog
Caption function operates in either analog TV channel mode or when a signal
is supplied from an external device to the TV. (Depending on the broadcasting
signal, the Analog Caption function may or may not work with digital
channels.)
English
▶
■■ Auto Protection Time
●● Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10 hours): If the
screen remains idle with a still image for a certain period of time defined by the
user, the screen saver is activated to prevent the formation of ghost images
on the screen.
◀
▶
English
■■ General
●● Game Mode (Off / On): When connecting to a game console such as
PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience
selecting the game menu.
NN NOTE
●● Precautions and limitations for game mode
–– To disconnect the game console and connect another external
device, set Game Mode to Off in the setup menu.
◀
–– If you display the TV menu in Game Mode, the screen shakes ▶
slightly.
●● Game Mode is not available when the input source is set to TV or
HDMI/DVI (connecting a PC).
English
●● After connecting the game console, set Game Mode to On.
Unfortunately, you may notice reduced picture quality.
●● If Game Mode is On:
–– Picture Mode is set to Standard and Sound Mode is set to
Movie.
●● Menu Transparency (Bright / Dark): Set the Transparency of the menu.
●● Boot Logo (Off / On): Display Samsung logo when the TV is turned on.
◀
▶
English
❑❑ Support Menu
OO MENUm → Support → ENTERE
■■ e-Manual
You can read the introduction and instructions about the TV features stored in
your TV.
NN For the detailed information about e-Manual Screen, refer to “How to use the
e-Manual” in User Manual.
◀
▶
English
■■ Self Diagnosis
●● Picture Test (Yes / No): Use to check for picture problems. If the problem
continues to occur, check the Color pattern.
Yes: If the test picture does not appear or there is noise in the test pattern,
select Yes. There may be a problem with the TV. Contact Samsung’s Call
Center for assistance.
◀
No: If the test picture is properly displayed, select No. There may be a
problem with your external equipment. Please check your connections. If the
problem persists, refer to the external device’s user manual.
English
▶
●● Sound Test (Yes / No): Use the built-in melody sound to check for sound
problems.
Yes: If you can hear sound only from one speaker or not at all during the
sound test, select Yes. There may be a problem with the TV. Contact
Samsung’s Call Center for assistance.
No: If you can hear sound from the speakers, select No. There may be a
problem with your external equipment. Please check your connections. If the
problem persists, refer to the external device’s user manual.
◀
●● Signal Information: (digital channels only) An HD channel’s reception quality
is either perfect or the channels are unavailable. Adjust your antenna to
increase signal strength.
●● Troubleshooting: If the TV seems to have a problem, refer to this description.
NN If none of these troubleshooting tips apply, contact the Samsung
customer service center.
English
▶
■ Software Upgrade
Software Upgrade can be performed
by downloading the latest firmware from
“www.samsung.com,” to a USB memory
device.
Current Version - the software already
installed in the TV.
Software Upgrade
Current Version
2011/01/18_000001
By USB
Alternative Software
----/--/--_-----
N Software is represented as ‘Year/
◀
Month/Day_Version’.
U Move E Enter R Return
* It may differ depending on the model.
English
▶
Installing the Latest Version
●● By USB: Insert a USB drive containing the
◀
TV Rear Panel
firmware upgrade file, downloaded from
www.samsung.com, into the TV. Please
be careful not to disconnect the power or
remove the USB drive until upgrades are
complete. The TV will be turned off and on
automatically after completing the firmware
* It may differ depending on the model.
upgrade. When software is upgraded,
video and audio settings you have made
will return to their default settings. We
advise you to write down your settings so
that you can easily reset them after the upgrade.
English
▶
●● By Channel: Upgrade the software using the broadcasting signal.
NN If the function is selected during the software transmission period,
software will be automatically searched and downloaded.
NN The time required to download the software is determined by the signal
status.
●● Alternative Software(backup): If there is an issue with the new firmware and
it is affecting operation, you can change the software to the previous version.
◀
NN If the software was changed, existing software is displayed.
●● Standby Mode Upgrade(depending on the model): A manual upgrade will
be automatically performed at selected time. Since the power of the unit is
turned on internally, the screen may be turned on slightly for the product. This
phenomenon may continue for more than 1 hour until the software upgrade is
complete.
English
▶
■■ Contact Samsung
View this information when your TV does not work properly or when you want to
upgrade the software. You can find information regarding our call centers, and
how to download products and software.
■■ Contents Home
You can enjoy useful and various contents.
◀
▶
English
❑ Using the My Contents
Enjoy photos and music files saved on a USB Mass Storage Class (MSC) device.
1.
2.
Press the CONTENT button to
select My Contents.
My Contents
Photos
Press ▲/▼ button to select
desired menu (Photos, Music),
then press the ENTERE button.
Music
Source
Watch TV
◀
▶
* It may differ depending on the model.
English
❑❑ Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo,
music files to the USB jack on the back
of the TV.
3. When USB is connected to the TV,
popup window appears. Then you can
select Connected Device.
◀
English
TV Rear Panel
* It may differ depending on the model.
▶
NN It might not work properly with unlicenced multimedia files.
NN Need-to-Know List before using My Contents
●●
●●
●●
●●
◀
MTP (Media Transfer Protocol) is not supported.
The file system supports FAT16, FAT32 and NTFS.
Certain types of USB Digital camera may not be compatible with this TV.
My Contents only supports USB Mass Storage Class (MSC) devices. MSC
is a Mass Storage Class Bulk-Only Transport device. Examples of MSC
are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not
supported). Devices should be connected directly to the TV’s USB port.
●● Before connecting your device to the TV, please back up your files to prevent
them from damage or loss of data. SAMSUNG is not responsible for any data
file damage or data loss.
English
▶
●● USB (HDD) is not supported.
●● Do not disconnect the USB device while it is loading.
●● The higher the resolution of the image, the longer it takes to display on the
screen.
●● The maximum supported JPEG resolution is 15360X8640 pixels.
●● For unsupported or corrupted files, the “Not Supported File Format” message
is displayed.
●● If the files are sorted by Folder View, up to 1000 files can be displayed in
◀
each folder.
▶
English
●● MP3 files with DRM that have been downloaded from a non-free site cannot
be played. Digital Rights Management (DRM) is a technology that supports
the creation, distribution and management of the content in an integrated and
comprehensive way, including the protection of the rights and interests of the
content providers, the prevention of the illegal copying of contents, as well as
managing billings and settlements.
●● If more than 2 PTP devices are connected, you can only use one at a time.
●● If more than two MSC devices are connected, some of them may not be
◀
recognized. A USB device that requires high power (more than 500mA or 5V)
may not be supported.
English
▶
●● If an over-power warning message is displayed while you are connecting or
using a USB device, the device may not be recognized or may malfunction.
●● If the TV has been no input during time set in Auto Protection Time, the
Screensaver will run.
●● The power-saving mode of some external hard disk drives may be released
automatically when connected to the TV.
◀
▶
English
●● If a USB extension cable is used, the USB device may not be recognised or
the files on the device may not be read.
●● If a USB device connected to the TV is not recognised, the list of files on the
device is corrupted or a file in the list is not played, connect the USB device to
the PC, format the device and check the connection.
●● My Contents only supports sequential jpeg format.
●● If the number of files and folders saved on a USB storage device is
◀
approximately over 4000, the files and folders may not appear and some
folders may not be opened.
English
▶
❑❑ Screen Display
Move to the desired file using the ◄/►/▲/▼ buttons and then press the
ENTERE. The file is played. My Contents screen may differ depending on the
way to enter the screen.
Information:
You can ascertain the
selected device name,
contents mode, folder/
file name, page and
sorting list.
Music
1/1 Page
File List Section:
You can confirm the
files and groups that are
sorted by category.
◀
C
Contents mode / Device name:
You can select the desired
Contents mode or Device name.
A Mode
B
Edit
DT
Tools
R Return
Operation Buttons:
A B (Edit
D Mode): Selects the desired music. The check box is
- C Yellow
shown in the screen to check the music you want. It is only available in
Music.
- T Tools: Displays the option menu.
- R Return: Move to the previous step.
- E Select: Select the contents in Edit Mode.
English
▶
■■ Music
Playing Music
1. Press the ◄/►/▲/▼ button to
select the desired Music in the file
list.
Music
2. Press the ENTERE button.
NN Only displays the files with MP3
◀
file extension. Other file extensions
are not displayed, even if they are
saved on the same USB device.
NN If the sound is abnormal when
▶
Enter
Pages
Tools
E
Enter LL
PagesT T
ToolsR Return
E
R Return
playing MP3 files, adjust the Equalizer in the Sound menu. (An overmodulated MP3 file may cause a sound problem.)
English
Playing the selected music
1. Press the
C
A B Mode)
D
(Edit
button.
2. Select the desired music.
NN The check box appears to the left of the selected files.
3. Press the TOOLS button and select Play Selected Contents.
NN You can select or deselect all music pressing the Select All/Deselect
All.
◀
▶
English
■■ Photos
Viewing a Photo (or Slide Show)
1. Press the ◄/►/▲/▼ button to
select the desired photo in the file
list.
Nomal
2. Press the ENTERE button.
●● When a selected photo
◀
is displayed, press the
ENTERE button to start the
slide show.
E Pause L Previous/Next T Tools R Return
●● During the slide show, all files in the file list will be displayed in order.
NN Music files can be automatically played during the Slide Show if the
Background Music is set to On.
English
▶
❑❑ My Contents - Additional Functions
Music/Photos Play Option menu
During playing a file, press the TOOLS button.
Category
◀
Operation
Music
Shuffle Mode
You can play the music randomly.
c
Repeat Mode
You can play music files repeatedly.
c
Picture Mode
You can adjust the picture setting.
Sound Mode
You can adjust the sound setting.
English
Photos
c
c
c
▶
Category
Start Slide Show /
Music
Photos
You can start or pause a Slide Show.
c
Slide Show Speed
You can select the slide show speed during
the slide show.
c
Background Music
You can turn background music on and off
when watching a slide show.
c
Pause Slide Show
◀
Operation
Background Music You can select background music when
Setting
watching a Slide Show.
English
c
▶
Category
Operation
Music
Photos
Zoom
You can zoom into images in full screen mode.
c
Rotate
You can rotate images in full screen mode.
c
Information
You can see detailed information about the
played file.
◀
c
c
▶
English
❑❑ Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and
solutions. If none of these troubleshooting tips apply, visit samsung.com, then
click on Support, or call Samsung customer service.
Issues
Poor picture
◀
Solutions and Explanations
First of all, please perform the Picture Test and confirm
that your TV is properly displaying test image.
●● go to MENU - Support - Self Diagnosis - Picture
Test
If the test image is properly displayed, the poor picture
may caused by the source or signal.
English
▶
Issues
Solutions and Explanations
The TV image does
not look as good as
it did in the store.
●● If you have an analog Cable/Set top box, upgrade to
a digital set top box. Use HDMI or Component cables
to deliver HD (high definition) picture quality.
●● Cable/Satellite subscribers: Try HD stations from the
channel line up.
●● Air/Cable Antenna connection: Try HD stations after
◀
performing Auto program.
NN Many HD channels are up scaled from
SD(Standard Definition) contents.
●● Adjust the Cable/Set top box video output resolution
to 1080i or 720p.
English
▶
Issues
The picture is
distorted: macro
block error, small
block, dots,
pixelization.
Solutions and Explanations
●● Compression of video contents may cause picture
distortion, especially in fast moving pictures such as
sports and action movies.
●● Low signal level can cause picture distortion. This is
not a TV problem.
●● Mobile phones used close to the TV (up to 3.3 ft) may
◀
cause noise in picture on analog and digital TV.
English
▶
Issues
There is poor color
or brightness.
Solutions and Explanations
●● Adjust the Picture options in the TV menu. (go to
Picture Mode / Color / Brightness / Sharpness)
●● Adjust Energy Saving option in the TV menu (go to
MENU - System - Eco Solution - Energy Saving)
●● Try resetting the picture to view the default picture
setting. (go to MENU - Picture - Reset Picture)
◀
There is a dotted
line on the edge of
the screen.
●● If the picture size is set to Screen Fit, change it to
16:9.
●● Change cable/Set top box resolution.
English
▶
Issues
The picture is black
and white.
◀
Solutions and Explanations
●● If you are using an AV composite input, connect the
video cable (yellow) to the Green jack of component
input 1 on the TV.
●● If connected to a cable box, please try to reset it.
When changing
channels, the
(reconnect the AC cord and wait until the cable box
picture freezes or is
reboots. It may take up to 20 minutes)
distorted or delayed. ●●
Set output resolution of the cable box to 1080i or
720p.
English
▶
Issues
Sound Problem
Solutions and Explanations
First of all, please perform the Sound Test to confirm
that your TV audio is properly operating.
●● go to MENU - Support - Self Diagnosis - Sound
Test
If the audio is OK, the sound problem may caused by
the source or signal.
◀
There is no sound
or the sound is too
low at maximum
volume.
●● Please check the volume of the device (Cable/Sat
Box, DVD, Blu-ray etc) connected to your TV.
English
▶
Issues
The picture is good
but there is no
sound.
Solutions and Explanations
●● If you are using a DVI to HDMI cable, TV set not
support audio.
●● Reboot the connected device by reconnecting the
device’s power cable.
◀
The speakers
are making an
inappropriate noise.
●● For Antenna or Cable connections, check the signal
information. Low signal level may cause sound
distortion.
●● Perform the Sound Test as explained above.
English
▶
Issues
Solutions and Explanations
No Picture, No Video
The TV will not turn
on.
●● Make sure the AC power cord is securely plugged
into the wall outlet and the TV.
●● Make sure the wall outlet is working.
●● Try pressing the POWER button on the TV to make
◀
sure the problem is not the remote.
If the TV turns on, refer to ‘Remote control does not
work’ below.
English
▶
Issues
The TV turns off
automatically.
Solutions and Explanations
●● Ensure the Sleep Timer is set to Off in the System
menu.
●● If your PC is connected to the TV, check your PC
power settings.
●● Make sure the AC power cord is plugged in securely
to the wall outlet and the TV.
◀
●● When watching TV from an antenna or cable
connection, the TV will turn off after 10 - 15 minutes if
there is no signal.
English
▶
Issues
Solutions and Explanations
There is no picture/
video
●● Check cable connections. (remove and reconnect all
cables connected to the TV and external devices).
●● Set your external device’s (Cable/Set top box, DVD,
Blu-ray etc) video outputs to match the connections
to the TV input. For example, if an external device’s
output is HDMI, it should be connected to an HDMI
input on the TV.
◀
●● Make sure your connected devices are powered on.
●● Be sure to select the TV’s correct source by pressing
the SOURCE button on the remote control.
●● Reboot the connected device by reconnecting the
device’s power cable.
English
▶
Issues
Solutions and Explanations
RF(Cable/Antenna) Connection
The TV is not
receiving all
channels.
◀
●● Make sure the coaxial cable is connected securely.
●● Please try Plug & Play (Initial setup) to add available
channels to the channel list. Go to MENU - System
- Plug & Play (Initial setup) and wait for all available
channels to be stored.
●● Verify the Antenna is positioned correctly.
No Caption on
digital channels.
Check Caption Setup menu.
Some channels may not have caption data.
English
▶
Issues
The picture is
distorted: macro
block, error,
small block, dots,
pixelization.
Solutions and Explanations
●● Compression of video contents may cause picture
distortion. especially on fast moving pictures such as
sports and action movies.
●● A low signal can cause picture distortion. This is not a
TV problem.
Others
◀
●● HD channels will have black bars on either side of the
The picture will not
display in full screen.
screen when displaying up scaled SD (4:3) contents.
●● Black bars on Top & Bottom will be shown on movies
that have aspect ratios different from your TV.
●● Adjust picture size option on your external device or
TV to full screen.
English
▶
Issues
The remote control
does not work.
Solutions and Explanations
●● Replace the remote control batteries with correct
polarity (+/–).
●● Clean the transmission window located on the top of
the remote.
●● Try pointing the remote directly at the TV from 5~6
feet away.
◀
●● Program the Cable/Set top box remote control to the
The cable/set top
box remote control
operate the TV. Refer to the Cable/Set top box user
does not turn the TV
manual for SAMSUNG TV code.
on or off, or adjust
the volume.
English
▶
Issues
Solutions and Explanations
A “Mode Not
Supported”
message appears.
●● Check the supported resolution of the TV and adjust
Caption on TV
menu is greyed out.
●● Caption can not be selected in the TV menu when
the external device’s output resolution accordingly.
Refer to resolution settings in this manual.
connected via HDMI or Component.
●● Caption must be activated on the external device.
◀
There is a plastic
smell from the TV.
●● This smell is normal and will dissipate over time.
TV Signal
Information is
unavailable in the
Self Diagnosis Test
menu.
●● This function is only available with digital channels
from an Antenna / RF / Coax connection.
English
▶
Issues
◀
Solutions and Explanations
TV is tilted to the
right or left side.
●● Remove the stand base from the TV and reassemble
The Channel
menu is grey out
(unavailable).
●● The Channel menu is only available when the TV
it.
source is selected.
●● If TV is in the Store Demo mode, it will reset audio
Your settings are
lost after 30 minutes
and picture settings every 30 minutes. Please change
or every time the TV
from Store Demo mode to Home Use mode in
is turned off.
the Plug & Play(Initial setup) procedure. Press the
SOURCE button to select TV mode, go to MENU →
System → Plug & Play(Initial setup) → ENTERE.
English
▶
Issues
You have
intermittent loss of
audio or video.
◀
Solutions and Explanations
●● Check the cable connections and reconnect them.
●● Loss of audio or video can be caused by using overly
rigid or thick cables. Make sure the cables are flexible
enough for long term use. If mounting the TV to the
wall, we recommend using cables with 90 degree
connectors.
The PIP menu is not ●● PIP functionality is only available when you are using
available.
a HDMI, HDMI/DVI or components source.
●● This is part of the product’s design and is not a
You see small
particles when you
defect.
look closely at the
edge of the frame of
the TV.
English
▶
Issues
POP (TV’s internal
banner ad) appears
on the screen.
Solutions and Explanations
●● Select Home Use under Plug & Play mode. For
details, refer to Plug & Play (Initial Setup).
◀
▶
English
❑❑ Anti-theft Kensington Lock
(depending on the model)
The Kensington Lock is not supplied by Samsung. It is a device used to physically
fix the system when using it in a public place. The appearance and locking
method may differ from the illustration depending on the manufacturer. Refer
to the manual provided with the Kensington Lock for additional information on
proper use.
NN Please find a “K” icon on the
◀
rear of the TV. A Kensington slot
is beside the “K” icon.
NN The position and color may
1
TV Rear
differ depending on the model.
Optional
English
▶
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object such as
desk or chair.
2. Slide the end of the cable with the lock attached through the looped end of
the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product 1.
4. Lock the lock.
◀
NN NOTE
●● These are general instructions. For exact instructions, see the User
manual supplied with the locking device.
●● The locking device has to be purchased separately.
●● The location of the Kensington slot may be different depending on the TV
model.
English
▶
❑❑ License
TheaterSound, SRS and symbol are trademarks of SRS Labs, Inc.
TheaterSound technology is incorporated under license from SRS
Labs, Inc.
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
◀
Open Source Licence Notice
In the case of using open source software, Open Source Licences are available on the
product menu. Open Source Licence Notice is written only English.
English
Download PDF

advertising