Nikon COOLPIX P530 Quick start guide

Nikon COOLPIX P530 Quick start guide
Quick Start Guide
Confirming the Package Contents
First Steps
Shooting and Playback
Using ViewNX 2
Other Functions
For Your Safety
3
5
14
20
24
32
En
Thank you for purchasing the Nikon COOLPIX P530 digital camera. This guide introduces the
procedures necessary for first time use of this camera.
To ensure proper use, please read and thoroughly understand the information in “For Your Safety”
(A32) before using the camera.
C
Downloading the “Reference Manual”
Refer to the Reference Manual (PDF format) for more detailed information.
The Reference Manual can be downloaded from the Nikon website.
http://nikonimglib.com/manual/
The Reference Manual can be viewed using Adobe Reader, available for free download from the Adobe
website.
Nikon User Support
Should you need technical support, we offer a number of options.
Internet
Please visit the Nikon support home page, where you can:
• Search Nikon's continuously updated Knowledge Database for the latest technical support
information.
• Use “Ask Nikon a Question” to receive a prompt reply from a Nikon professional advisor to your
e-mail.
• Download the latest versions of Nikon software or firmware updates for your product, or register to
receive e-mail notification for software or firmware updates.
For customers in the United States: www.nikonusa.com
For customers in Canada: www.nikon.ca (English), fr.nikon.ca (Français)
For customers in Mexico: www.nikon.com.mx
For customers in Brazil: www.nikon.com.br
Telephone
Please call for technical support and other product assistance. Our professional advisers are standing by
to help with your digital camera needs.
For customers in the United States: 1-800-NIKON-US (1-800-645-6687)
For customers in Canada: 1-877-534-9910
For customers in Mexico: 001-888-565-5452
For customers in Brazil: 0800-886-4566 (0800-88 NIKON)
An Important Notice about Accessories
Nikon COOLPIX digital camera is designed to the highest standards and includes complex
electronic circuitry. Only Nikon accessories, such as battery chargers, batteries, charging AC
adapters, AC adapters, and cables are certified by Nikon specifically for your Nikon COOLPIX
camera and are engineered and tested to operate within the requirements of the electronic
circuitry of our cameras.
THE USE OF NON-NIKON ACCESSORIES MAY DAMAGE YOUR CAMERA AND WILL VOID YOUR
NIKON WARRANTY.
Genuine Nikon accessories are available through your Nikon-authorized dealer.
2
Confirming the Package Contents
In the event that any items are missing, please contact the store
where you purchased the camera.
COOLPIX P530
Digital Camera
Camera Strap
Lens Cap LC-CP24
(with cord)
Rechargeable Li-ion Battery
EN-EL5
Charging AC Adapter
EH-72P*
USB Cable UC-E6
• Quick Start Guide (this guide)
• Warranty
* A plug adapter is included if the camera was purchased in a country or
region that requires a plug adapter. The shape of the plug adapter varies
with the country or region of purchase (A9).
NOTE: A Secure Digital (SD) memory card, hereafter referred to as a “memory
card”, is not provided.
A: This icon indicates that more information is available elsewhere in this guide.
Confirming the Package Contents
3
Parts of the Camera
1 2
3
5
1
2
3
4
5
6
4
7
4
6
Power switch/power-on lamp
w (function) button
Mode dial
Flash
Shutter-release button
Zoom control
f : wide-angle
g : telephoto
h : thumbnail playback
i : playback zoom
j : help
8
9
13
7
8
9
10
11
12
13
14
15
16
17
18
19
Confirming the Package Contents
10
11
12
14 15 16 17 18 19
m (flash pop-up) button
Diopter adjustment control
Electronic viewfinder
x (monitor) button
b (e movie-record) button
Command dial
Monitor
Charge lamp
Flash lamp
c (playback) button
d (menu) button
l (delete) button
k (apply selection) button
Rotary multi selector
(multi selector)
First Steps
Step 1
Attaching the Camera Strap and Lens
Cap
Attach the Lens Cap LC-CP24 to the strap, and then attach the strap to the
camera.
Attach the strap at two places.
B Lens Cap
• At times when you are not shooting images, attach the lens cap to the
lens to protect it.
• Do not attach anything other than the lens cap to the lens.
First Steps
5
Step 2
Insert the Battery and the Memory Card
2.1
Open the battery-chamber/memory
card slot cover.
2.2
Insert the battery.
• Push the orange battery latch in the
direction indicated by the arrow (1),
and fully insert the battery (2).
• The battery locks into place when
inserted correctly.
Battery latch
Be Careful to Insert the Battery in Correct
Direction
Inserting the battery upside down or
backwards could damage the camera.
6
First Steps
2.3
Insert the memory card.
• Slide the memory card in until it clicks
into place.
Memory card slot
Be Careful to Insert the Memory Card in Correct
Direction
Inserting the memory card upside down or backwards
could damage the camera and the memory card.
2.4
Close the battery-chamber/memory
card slot cover.
First Steps
7
Removing the Battery and the Memory Card
Turn the camera off and make sure that the power-on lamp and the
monitor have turned off, and then open the battery-chamber/
memory card slot cover.
B High Temperature Caution
The camera, battery, and memory card may be hot immediately after using
the camera.
Removing the Battery
• Move the battery latch in the direction
indicated by the arrow (1) to eject the battery
(2).
Removing the Memory Card
• Gently push the memory card into the
camera (1) to partially eject the card (2).
8
First Steps
Step 3
3.1
Charge the Battery
Prepare the included charging AC adapter.
If a plug adapter* is included with your camera, attach
the plug adapter to the plug on the charging AC
adapter. Push the plug adapter firmly until it is
securely held in place. Once the two are connected,
attempting to forcibly remove the plug adapter could
damage the product.
* The shape of the plug adapter varies according to
the country or region in which the camera was
purchased.
This step can be omitted if the plug adapter comes
permanently bonded to the charging AC adapter.
3.2
Make sure the battery is inserted in the camera, and then connect
the camera to the charging AC adapter in order of 1 to 3.
• Keep the camera turned off.
• Make sure that the plugs are properly oriented. Do not insert or remove
the plugs at an angle when connecting or disconnecting them.
Charge lamp
Electrical outlet
USB cable (included)
• The charge lamp slowly flashes green to indicate that the battery is
charging.
• When charging is complete, the charge lamp stops flashing green
and turns off. About 4 hours and 10 minutes are required to charge
a fully exhausted battery.
First Steps
9
3.3
Disconnect the charging AC adapter from the electrical outlet
and then disconnect the USB cable.
C Turning On the Camera While the Battery is Charging
The camera does not turn on while the charging AC adapter is connected to
it even when you press the power switch. Press and hold the c (playback)
button to turn on the camera in playback mode and play back images.
Shooting is not possible.
Step 4
4.1
Turn the Camera On
Remove the lens cap.
• See “Attaching the Camera Strap and Lens Cap” (A5) for more
information.
4.2
Press the power switch.
• The monitor turns on.
• To turn the camera off, press the
power switch again.
C The Auto Off Function
• If no operations are performed for a while, the monitor will turn off, the
camera will enter standby mode, and the power-on lamp will flash. If no
operations are performed for another 3 minutes, the camera will turn off
automatically.
• The time that elapses before the camera enters standby mode is about 1
minute. The time can be changed using the Auto off setting in the setup
menu (A28).
10
First Steps
Step 5
Setting the Display Language, Date,
and Time
When the camera is turned on for the first
time, the language-selection screen and the
date and time setting screen for the camera
clock are displayed. Use the rotary multi
selector to select the settings.
• If you exit without setting the date and
time, O will flash when the shooting screen is displayed.
Rotary Multi Selector
Select the item above*
Select the item on the left/
Return display to the
previous screen
Select the item below*
Select the item on the
right/Display sub-menu
(apply selection)
Apply selection
* Items above or below can also be selected by rotating the rotary multi
selector.
5.1
Use the multi selector
HI to select the desired
language and press the
k button.
Language
Български
Čeština
Dansk
Deutsch
English
Español
Cancel
First Steps
11
5.2
Select Yes and press the k button.
Time zone and date
Choose time zone and
set date and time?
Yes
No
Cancel
5.3
Select your home time
zone and press the k
button.
New York
Toronto
Lima
• To enable daylight saving
time, press H. When the
Back
daylight saving time
function is enabled, W is
displayed above the map.
To turn off the daylight saving time function, press I.
5.4
12
Select the date format and press the
k button.
First Steps
Date format
Year/Month/Day
Month/Day/Year
Day/Month/Year
5.5
Set the date and time, and press the
k button.
Date and time
M
D
Y
h
m
• Select a field: Press JK (changes
05 15 2014 15 10
between M, D, Y, h, and m).
• Edit the date and time: Press HI.
Edit
Date and time can also be changed by
rotating the multi selector or command
dial.
• Confirm the setting: Select the m field and press the k button.
5.6
Select Yes and press the k button.
• When settings are finished, the lens
extends and the camera switches to
shooting mode.
Date and time
05/15/2014 15:10
OK?
Yes
No
C Imprinting the Date on Images While Taking Images
After setting the date and time, press the d button to display the
z (setup) menu and set Print date setting (A28).
• Use the rotary multi selector to select and set menu options.
• Press the d button to exit the menu.
C Changing the Current Date, Time, or Language
Press the d button to display the z (setup) menu and set Language or
Time zone and date (A29).
The next step explains basic shooting operations using A (auto) mode.
First Steps
13
Shooting and Playback
Step 1
Rotate the Mode Dial and Align the A
(auto) Icon to the Mark
Step 2
Check the Battery Level and the Number
of Exposures Remaining
Battery level indicator
1/250
F5.6
25m 0s
840
Number of
exposures
remaining*
* When data is recorded to the internal memory, C is displayed.
Battery level indicator
Display
Description
b
The battery level is high.
B
The battery level is low.
N
Battery exhausted.
The camera cannot capture images.
Recharge the battery.
14
Shooting and Playback
Built-in Flash
In situations where a flash is needed, such
as in dark locations or when the subject is
backlit, press the m (flash pop-up) button
to raise the flash.
• When not using the flash, gently push
to lower the flash until it clicks shut.
Switching Between the Monitor
and Viewfinder (x Button)
You can use the viewfinder when
bright light under the open sky makes it
difficult to see the monitor.
Each press of the x button switches
the display between the monitor and
viewfinder.
Viewfinder
x (monitor)
button
Diopter Adjustment of the Viewfinder
When the image in the viewfinder is
difficult to see, adjust by rotating the
diopter adjustment control while
looking through the viewfinder.
• Take care not to scratch your eye
with your fingertips or nails.
Diopter adjustment control
Shooting and Playback
15
Step 3
3.1
Frame a Picture
Hold the camera steady.
• Keep fingers and other objects away from the lens, flash, AF-assist
illuminator, microphone, and speaker.
3.2
Frame the picture.
1/250
Using the Zoom
• To zoom in closer to the subject: Move
toward g (telephoto)
• To zoom out and view a larger area: Move
toward f (wide-angle)
• Rotating the zoom control all the way in
either direction adjusts the zoom quickly.
16
Shooting and Playback
Zoom out
F5.6
25m 0s
840
Zoom in
Step 4
4.1
Focus and shoot
Press the shutter-release
button halfway.
• When the subject is in focus,
the focus area that includes the
subject or focus indicator
glows green (multiple focus
areas can glow green).
• When you are using digital
zoom, the camera focuses on
the subject in the center of the
frame and the focus area is not
displayed. When the camera
has focused, the focus indicator
1/250 F5.6
glows green.
• If the focus area or focus
Focus area
indicator flashes red, the
camera is unable to focus. Modify the composition and try pressing
the shutter-release button halfway again.
4.2
Without lifting your finger, press the shutter-release button the
rest of the way down.
The Flash Lamp
The status of the flash can be confirmed by
pressing the shutter-release button halfway.
• On: The flash fires when you press the shutterrelease button all the way down.
• Flashing: The flash is charging. The camera
cannot shoot images.
• Off: The flash does not fire when an image is
taken.
Shooting and Playback
17
C Focusing
To set focus and exposure (shutter speed and aperture value), press the
shutter-release button halfway.
The focus area varies depending on the shooting mode.
In A (auto) mode, the camera detects the main subject and focuses on it
when the shutter-release button is pressed halfway. If a human face is
detected, the camera automatically sets focus priority on it.
Step 5
5.1
Play Back Images
Press the c (playback)
button.
• If you press and hold down
the c (playback) button
while the camera is turned
off, the camera turns on in
playback mode.
5.2
4/132
0112. JPG
05/15/2014 15:30
Use the multi selector to select an
image to display.
Display the previous image
• Press and hold down HIJK to scroll
through the images quickly.
• Images can also be selected by rotating
the multi selector.
• To return to shooting mode, press the
c button or shutter-release button.
Display the next image
C Displaying Shooting Information
Press the k button in full-frame playback mode to display the tone level
information and shooting information.
Press the k button again to return to full-frame playback mode.
18
Shooting and Playback
Step 6
6.1
Delete Images
Press the l button to delete
the image currently
displayed in the monitor.
4/132
0112. JPG
05/15/2014 15:30
6.2
Use the multi selector HI to select
the desired deletion method and
press the k button.
• To exit without deleting, press the d
button.
6.3
Delete
Current image
Erase selected images
All images
Select Yes and press the k button.
• Deleted images cannot be recovered.
• To cancel, select No and press the k
button.
Step 7
Erase 1 image?
Yes
No
Turn Off the Camera
Press the power switch to turn the camera off.
• When the flash is raised,
gently press the flash down to
lower it.
Shooting and Playback
19
Using ViewNX 2
Install ViewNX 2 to upload, view, edit, and share photos and movies.
Your Imaging Toolbox
Step 1
ViewNX 2™
Installing ViewNX 2
An Internet connection is required. For system requirements and
other information, see the Nikon website for your region.
1.1
Download the ViewNX 2 installer.
Start the computer and download the installer from:
http://nikonimglib.com/nvnx/
1.2
Double-click the downloaded file.
1.3
Follow the on-screen instructions.
1.4
Exit the installer.
Click Yes (Windows) or OK (Mac).
20
Using ViewNX 2
Step 2
2.1
Transferring Images to the Computer
Choose how images will be copied to the computer.
Choose one of the following methods:
• Direct USB connection: Turn the camera off and ensure that the
memory card is inserted in the camera. Connect the camera to the
computer using the USB cable. The camera automatically turns on.
To transfer images that are saved in the camera’s internal memory,
remove the memory card from the camera before connecting it to
the computer.
• SD card slot: If your computer is equipped with an SD card slot, the
card can be inserted directly in the slot.
• SD card reader: Connect a card reader (available separately from
third-party suppliers) to the computer and insert the memory card.
Using ViewNX 2
21
If a message is displayed prompting you to choose a program, select
Nikon Transfer 2.
• When using Windows 7
If the dialog shown at right
is displayed, follow the
steps below to select Nikon
Transfer 2.
1 Under Import pictures
and videos, click
Change program. A program selection dialog will be displayed;
select Import File using Nikon Transfer 2 and click OK.
2 Double-click Import File.
If the memory card contains a large number of images, it may take a
while for Nikon Transfer 2 to start. Wait until Nikon Transfer 2 starts.
B Connecting the USB Cable
The connection may not be recognized if the camera is connected to the
computer via a USB hub.
2.2
Transfer images to the computer.
• Click Start Transfer.
Start Transfer
• At default settings, all the images on the memory card will be copied
to the computer.
22
Using ViewNX 2
2.3
Terminate the connection.
• If the camera is connected to the computer, turn the camera off and
disconnect the USB cable.
• If you are using a card reader or card slot, choose the appropriate
option in the computer operating system to eject the removable
disk corresponding to the memory card and then remove the card
from the card reader or card slot.
Step 3
Viewing Images
Start ViewNX 2.
• Images are displayed in ViewNX 2
when transfer is complete.
• Consult online help for more
information on using ViewNX 2.
C Starting ViewNX 2 Manually
• Windows: Double-click the ViewNX 2 shortcut on the desktop.
• Mac: Click the ViewNX 2 icon in the Dock.
Using ViewNX 2
23
Other Functions
Functions That Can Be Set Using the Multi
Selector
Press the multi selector H (m), J (n), I (D), or K (o) while
shooting to operate the following functions.
1
2
4
3
Function
1 m Flash mode
The camera is equipped with 10s, 2s timers.
Smile timer
The camera detects smiling faces using face
priority and releases the shutter automatically.
3 D Focus mode
24
The flash mode can be set when the flash is
raised.
Self-timer
2 n
4 o
Description
Exposure
compensation
Other Functions
Choose from A (autofocus), D (macro closeup), B (infinity), and E (manual focus).
• E can be selected when the shooting mode
is j, k, l, m or M, special effects mode, or
Sports or Bird-watching scene mode.
You can adjust overall image brightness.
Selecting a Shooting Mode
When the mode dial is rotated next to the mark, the camera switches
to the corresponding shooting mode shown below.
Auto mode
A Auto mode
Used for general shooting.
y, X, s, c (Scene) modes
Camera settings are optimized according to the scene that you
select.
• y: Press the d button and select a scene. When using
Scene auto selector, the camera automatically selects the
optimum scene mode when you frame an image, making it even
easier to take images using settings that suit the scene.
• X (night landscape): Use this mode to shoot night landscapes.
• s (night portrait): Use this mode to shoot evening and night
portraits that include background scenery.
• c (landscape): Use this mode to shoot landscapes.
u (Special effects) mode
Effects can be applied to images during shooting.
Other Functions
25
j, k, l, m modes
Select these modes for greater control over shutter speed and
aperture value.
M (User settings) mode
Setting combinations that are frequently used for shooting can be
saved. The saved settings can be immediately retrieved for shooting
simply by rotating the mode dial to M.
Recording Movies
Movies can be recorded in any shooting
mode.
Press the b (e movie-record) button to
start movie recording.
Press the b (e movie-record) button
again to stop movie recording.
26
Other Functions
Using Menus (the d Button)
Use the multi selector and k button to navigate the menus.
1
Press the d button.
• The menu that matches the status of the camera, such as shooting
or playback menu, is displayed.
Unavailable menu items are displayed in gray and cannot be
selected.
Shooting menu
1/250
2
F5.6
25m 0s
840
Image quality
Image size
Picture Control
Custom Picture Control
White balance
Metering
Continuous
Use the multi selector to select a
menu item.
• HI or rotation: Select an item
above or below.
Apply selection
• JK: Select an item on the left or
right, or move between menu levels.
• k: Apply a selection. Pressing K also applies a selection.
3
After completing the settings, press the d button or shutterrelease button.
• Press the shutter-release button to display the shooting screen.
Other Functions
27
Switching Among Menu Tabs
To display a different menu, such as the setup menu, use the multi
selector to switch to another tab.
Tabs
Shooting menu
Image quality
Image size
Picture Control
Custom Picture Control
White balance
Metering
Continuous
Use J to move to the
tabs.
28
Other Functions
Shooting menu
Image quality
Image size
Picture Control
Custom Picture Control
White balance
Metering
Continuous
Use HI to select a tab,
and press the k button or
K to apply the selection.
Set up
Welcome screen
Time zone and date
Monitor settings
Print date
Vibration reduction
Motion detection
AF assist
Tab Types
For Shooting
Shooting menu
Image quality
Image size
Picture Control
Custom Picture Control
White balance
Metering
Continuous
For Playback
Playback menu
Quick retouch
D-Lighting
Skin softening
Filter effects
Print order
Slide show
Protect
j tab:
Displays the settings available for
the current shooting mode.
c tab:
Depending on the current
Displays the settings available for
shooting mode, the tab icon that is
the playback mode.
displayed will be different.
e tab:
Displays movie recording settings.
z tab:
Displays the setup menu, where you can change general settings.
Other Functions
29
Playback Mode
The following options can be performed in full-frame playback
mode.
Control
Name
Main Functions
Zoom control
• Move toward g (i) to zoom in on the
image, and move toward f (h) to
display images as thumbnails or the
calendar.
• Adjust the volume for voice memo
and movie playback.
Multi selector
• While the playback screen is displayed:
Change the displayed image using up
(H), left (J), down (I), right (K), or
by rotating the multi selector.
• While the setting screen is displayed:
Select an item using HIJK or by
rotating the multi selector.
• While an enlarged image is displayed:
Move the display area.
• Switch the monitor display between
the histogram, tone level and
shooting information display and fullframe playback.
• Display individual images of a
sequence in full-frame playback mode.
k (apply
• Scroll an image shot with Easy
selection) button
panorama.
• Play back movies.
• Switch from thumbnail playback or
zoomed image display to full-frame
playback.
• While the setting screen is displayed,
apply the selection.
30
Other Functions
Control
Name
Main Functions
Command dial
Switch the magnification of an enlarged
image.
d (menu)
button
Display and hide the menu.
l (delete)
button
Delete images.
x (monitor)
button
Switch between the monitor and
viewfinder.
Other Functions
31
For Your Safety
To prevent damage to your Nikon product or injury to yourself or to
others, read the following safety precautions in their entirety before
using this equipment. Keep these safety instructions where all those who
use the product will read them.
The consequences that could result from failure to observe the
precautions listed in this section are indicated by the following symbol:
This icon marks warnings, information that should be read before using
this Nikon product, to prevent possible injury.
WARNINGS
Turn off in the event of malfunction
Should you notice smoke or an unusual smell coming from the camera
or charging AC adapter, unplug the charging AC adapter and remove the
battery immediately, taking care to avoid burns. Continued operation
could result in injury. After removing or disconnecting the power source,
take the equipment to a Nikon-authorized service representative for
inspection.
Do not disassemble
Touching the internal parts of the camera or charging AC adapter could
result in injury. Repairs should be performed only by qualified
technicians. Should the camera or charging AC adapter break open as
the result of a fall or other accident, take the product to a Nikonauthorized service representative for inspection, after unplugging the
product and/or removing the battery.
Do not use the camera or charging AC adapter in the presence
of flammable gas
Do not use electronic equipment in the presence of flammable gas, as
this could result in explosion or fire.
32
For Your Safety
Handle the camera strap with care
Never place the strap around the neck of an infant or child.
Keep out of reach of children
Particular care should be taken to prevent infants from putting the
battery or other small parts into their mouths.
Do not remain in contact with the camera, charging AC
adapter, or AC adapter for extended periods while the devices
are on or in use
Parts of the devices become hot. Leaving the devices in direct contact
with the skin for extended periods may result in low-temperature burns.
Do not leave the product where it will be exposed to extremely
high temperatures, such as in an enclosed automobile or in
direct sunlight
Failure to observe this precaution could cause damage or fire.
Observe caution when handling the battery
The battery may leak, overheat, or explode if improperly handled.
Observe the following precautions when handling the battery for use in
this product:
• Before replacing the battery, turn the product off. If you are using the
charging AC adapter/AC adapter, be sure it is unplugged.
• Use only a Rechargeable Li-ion Battery EN-EL5 (included). Charge the
battery by using a camera that supports battery charging or by using a
Battery Charger MH-61 (available separately). To charge the battery
with the camera, use either Charging AC Adapter EH-72P (included) or
the Charge by computer function.
• When inserting the battery, do not attempt to insert it upside down or
backwards.
• Do not short or disassemble the battery or attempt to remove or break
the battery insulation or casing.
• Do not expose the battery to flame or to excessive heat.
• Do not immerse in or expose to water.
For Your Safety
33
• Put the battery in a plastic bag, etc. to insulate the terminal before
transporting it. Do not transport or store with metal objects such as
necklaces or hairpins.
• The battery is prone to leakage when fully discharged. To avoid
damage to the product, be sure to remove the battery when no charge
remains.
• Discontinue use immediately should you notice any change in the
battery, such as discoloration or deformation.
• If liquid from the damaged battery comes in contact with clothing or
skin, rinse immediately with plenty of water.
•
•
•
•
•
•
Observe the following precautions when handling the
charging AC adapter
Keep dry. Failure to observe this precaution could result in fire or
electric shock.
Dust on or near the metal parts of the plug should be removed with a
dry cloth. Continued use could result in fire.
Do not handle the plug or go near the charging AC adapter during
lightning storms. Failure to observe this precaution could result in
electric shock.
Do not damage, modify, forcibly tug or bend the USB cable, place it
under heavy objects, or expose it to heat or flames. Should the
insulation be damaged and the wires become exposed, take it to a
Nikon-authorized service representative for inspection. Failure to
observe these precautions could result in fire or electric shock.
Do not handle the plug or charging AC adapter with wet hands. Failure
to observe this precaution could result in electric shock.
Do not use with travel converters or adapters designed to convert from
one voltage to another or with DC-to-AC inverters. Failure to observe
this precaution could damage the product or cause overheating or fire.
Use appropriate cables
When connecting cables to the input and output jacks, use only the
cables provided or sold by Nikon for the purpose, to maintain
compliance with product regulations.
34
For Your Safety
Handle moving parts with care
Be careful that your fingers or other objects are not pinched by the lens
cover or other moving parts.
Using the flash close to your subject’s eyes could cause
temporary visual impairment
The flash should be no less than 1 m (3 ft 4 in.) from the subject. Particular
care should be observed when photographing infants.
Do not operate the flash with the flash window touching a
person or object
Failure to observe this precaution could result in burns or fire.
Avoid contact with liquid crystal
Should the monitor break, care should be taken to avoid injury caused by
broken glass and to prevent liquid crystal from the monitor touching the
skin or entering the eyes or mouth.
Turn the power off when using inside an airplane or the
hospital
Turn the power off while inside the airplane during take off or landing.
Do not use wireless network functions while in the air.
Follow the instructions of the hospital when using while in a hospital.
The electromagnetic waves emitted by this camera may disrupt the
electronic systems of the airplane or the instruments of the hospital.
If you are using wireless network devices, remove them from the camera
before boarding an aircraft or entering a hospital.
For Your Safety
35
Notices
Notices for Customers in the U.S.A.
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS
For connection to a supply not in the U.S.A., use an attachment plug
adapter of the proper configuration for the power outlet if needed.
The power supply unit is intended to be correctly orientated in a vertical
or floor mount position.
Federal Communications Commission (FCC) Radio Frequency
Interference Statement
This equipment has been
tested and found to comply
with the limits for a Class B
digital device, pursuant to Part
15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
36
Notices
CAUTIONS
Modifications
The FCC requires the user to be notified that any changes or
modifications made to this device that are not expressly approved by
Nikon Corporation may void the user’s authority to operate the
equipment.
Interface Cables
Use the interface cables sold or provided by Nikon for your equipment.
Using other interface cables may exceed the limits of Class B Part 15 of
the FCC Rules.
Notice for Customers in the State of California
WARNING
Handling the cord on this product will expose you to lead, a chemical
known to the State of California to cause birth defects or other
reproductive harm.
Wash hands after handling.
Nikon Inc.,
1300 Walt Whitman Road,
Melville, New York 11747-3064
USA
Tel: 631-547-4200
Notice for Customers in Canada
CAN ICES-3 B / NMB-3 B
Notices
37
Caring for the Camera
To ensure continued enjoyment of this Nikon product, observe the
precautions described below in addition to the warnings in “For Your
Safety” (A32-35) when using or storing the device.
B
Do Not Drop
The product may malfunction if subjected to strong shock or vibration.
B
Handle the Lens and All Moving Parts with Care
Do not apply force to the lens, lens cover, monitor, memory card slot, or
battery chamber. These parts are easily damaged. Applying force to the
lens cover could result in camera malfunction or damage to the lens.
Should the monitor break, care should be taken to avoid injury caused by
broken glass and to prevent the liquid crystal from the display touching
the skin or entering the eyes or mouth.
B
Keep Dry
The device will be damaged if immersed in water or subjected to high
humidity.
B
Avoid Sudden Changes in Temperature
Sudden changes in temperature, such as when entering or leaving a
heated building on a cold day, can cause condensation to form inside the
device. To prevent condensation, place the device in a carrying case or a
plastic bag before exposing it to sudden changes in temperature.
B
Keep away from Strong Magnetic Fields
Do not use or store this device in the vicinity of equipment that generates
strong electromagnetic radiation or magnetic fields. Strong static charge
or the magnetic fields produced by equipment such as radio transmitters
could interfere with the monitor, damage data saved on the memory
card, or affect the product’s internal circuitry.
38
Notices
B
Do Not Point the Lens at Strong Light Sources for Extended
Periods
Avoid pointing the lens at the sun or other strong light sources for
extended periods when using or storing the camera. Intense light may
cause deterioration of the image sensor, producing a white blur effect in
photographs.
B
Turn the Product off Before Removing or Disconnecting the
Power Source or the Memory Card
Do not remove the battery while the product is on, or while images are
being saved or deleted. Forcibly cutting power in these circumstances
could result in loss of data or in damage to product memory or internal
circuitry.
B
Notes About the Monitor
• Monitors and electronic viewfinders are constructed with extremely
high precision; at least 99.99% of pixels are effective, with no more than
0.01% being missing or defective. Hence while these displays may
contain pixels that are always lit (white, red, blue, or green) or always off
(black), this is not a malfunction and has no effect on images recorded
with the device.
• Images in the monitor may be difficult to see under bright lighting.
• The monitor is lit by an LED backlight. Should the monitor begin to dim
or flicker, contact your Nikon-authorized service representative.
B
About the Manuals
Nikon will not be held liable for any damages resulting from the use of
this product.
Before Taking Important Pictures
Before taking pictures on important occasions (such as at weddings or
before taking the camera on a trip), take a test shot to ensure that the
camera is functioning normally. Nikon will not be held liable for damages
or lost profits that may result from product malfunction.
Notices
39
Disposing of Data Storage Devices
Please note that deleting images or formatting data storage devices such
as memory cards or built-in camera memory does not completely erase
the original image data. Deleted files can sometimes be recovered from
discarded storage devices using commercially available software,
potentially resulting in the malicious use of personal image data.
Ensuring the privacy of such data is the user’s responsibility.
Before discarding a data storage device or transferring ownership to
another person, erase all data using commercial deletion software, or
format the device and then completely refill it with images containing no
private information (for example, pictures of empty sky). Be sure to also
replace any pictures selected for the Select an image option in the
Welcome screen setting. Care should be taken to avoid injury or
damage to property when physically destroying data storage devices.
40
Notices
AVC Patent Portfolio License
This product is licensed under the AVC Patent Portfolio License for the
personal and non-commercial use of a consumer to (i) encode video in
compliance with the AVC standard (“AVC video”) and/or (ii) decode AVC
video that was encoded by a consumer engaged in a personal and noncommercial activity and/or was obtained from a video provider licensed
to provide AVC video. No license is granted or shall be implied for any
other use. Additional information may be obtained from MPEG LA, L.L.C.
See http://www.mpegla.com.
FreeType License (FreeType2)
Portions of this software are copyright © 2012 The FreeType Project
(http://www.freetype.org). All rights reserved.
MIT License (HarfBuzz)
Portions of this software are copyright © 2014 The HarfBuzz Project
(http://www.freedesktop.org/wiki/Software/HarfBuzz). All rights reserved.
Notices
41
Trademark Information
• Microsoft, Windows and Windows Vista are either registered
trademarks or trademarks of Microsoft Corporation in the United States
and/or other countries.
• Mac, OS X, the iFrame logo and the iFrame symbol are trademarks or
registered trademarks of Apple Inc., in the U.S. and other countries.
• Adobe and Acrobat are registered trademarks of Adobe Systems Inc.
• SDXC, SDHC and SD Logos are trademarks of SD-3C, LLC.
• PictBridge is a trademark.
• HDMI, HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
• All other trade names mentioned in this manual or the other
documentation provided with your Nikon product are trademarks or
registered trademarks of their respective holders.
42
Notices
43
FX6B02(11)
6MN41111-02
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement