Nikon COOLPIX S6800 Quick start guide

Nikon COOLPIX S6800 Quick start guide
Quick Start Guide
Confirming the Package Contents
First Steps
Shooting and Playback
Using ViewNX 2
Other Functions
For Your Safety
Thank you for purchasing the Nikon COOLPIX S6800 digital camera. This guide introduces the
procedures necessary for first time use of this camera.
To ensure proper use, please read and thoroughly understand the information in “For Your Safety”
(pages 30–33) before using the camera.
Downloading the “Reference Manual”
Refer to the Reference Manual (PDF format) for more detailed information. The Reference Manual can
be downloaded from the Nikon website.
The Reference Manual can be viewed using Adobe Reader, available for free download from the
Adobe website.
Nikon User Support
Visit the site below to register your camera and keep up-to-date with the latest product information.
You will find answers to frequently asked questions (FAQs) and can contact us for technical assistance.
An Important Notice about Accessories
Nikon COOLPIX digital cameras are designed to meet the highest standards and are equipped
with complex electronic circuitry. Only Nikon accessories, including chargers, batteries, Charging
AC Adapters, and AC adapters are certified by Nikon specifically for use with your Nikon COOLPIX
digital camera. These accessories have been engineered and tested to operate within the
requirements of the electronic circuitry of our cameras.
Confirming the Package Contents
In the event that any items are missing, please contact the store where you
purchased the camera.
COOLPIX S6800 Digital Camera
Camera Strap
Charging AC Adapter EH-71P*
USB Cable UC-E21
Rechargeable Li-ion Battery
• Quick Start Guide (this guide)
• Warranty
* A plug adapter is included if the camera was purchased in a country or region that
requires a plug adapter. The shape of the plug adapter varies with the country or
region of purchase (A8).
NOTE: A Secure Digital (SD) memory card, hereafter referred to as a “memory card,”
is not provided.
A: This icon indicates that more information is available elsewhere in this guide.
Confirming the Package Contents
Parts of the Camera
Power switch/power-on lamp
Zoom control
Shutter-release button
Charge lamp/flash lamp
b (e movie-record) button
A (shooting mode) button
c (playback) button
Confirming the Package Contents
Multi selector
k (apply selection) button
l (delete) button
d button
Battery-chamber/memory card slot cover
First Steps
Step 1
Attach the Camera Strap
Step 2
Insert the Battery and Memory Card
If a memory card is inserted in the camera, image’s data is saved on the memory card.
If no memory card is inserted in the camera, the data is saved to the camera’s internal
Open the battery-chamber/memory card slot cover.
First Steps
Insert the battery.
Battery latch
• Push the orange battery latch in the direction indicated by
the arrow (1), and fully insert the battery (2).
• The battery locks into place when inserted correctly.
Be Careful to Insert the Battery in Correct Direction
Inserting the battery upside down or backwards could
damage the camera.
Insert the memory card.
• Slide the memory card in until it clicks into place.
Be Careful to Insert the Memory Card in Correct
Inserting the memory card upside down or backwards could
damage the camera and memory card.
First Steps
Memory card slot
Close the battery-chamber/memory card slot cover.
Removing the Battery and Memory Card
Turn the camera off and make sure that the power-on lamp and monitor have turned off, and
then open the battery-chamber/memory card slot cover.
• The camera, battery, and memory card may be hot immediately after using the camera.
Removing the Battery
Move the battery latch in the direction indicated by the arrow (1) to
eject the battery (2).
Removing the Memory Card
Gently push the memory card into the camera (1) to partially eject
the card (2).
First Steps
Step 3
Charge the Battery
Use the included Charging AC Adapter and USB cable to charge the battery while it
is in the camera.
Prepare the included Charging AC Adapter.
If a plug adapter* is included with your camera, attach the plug
adapter to the plug on the Charging AC Adapter. Push the plug adapter
firmly until it is securely held in place. Once the two are connected,
attempting to forcibly remove the plug adapter could damage the
* The shape of the plug adapter varies according to the country or
region in which the camera was purchased. This step can be omitted
if the plug adapter comes permanently bonded to the Charging AC
First Steps
Make sure the battery is installed in the camera, and then connect the camera
to the Charging AC Adapter in order of 1 to 3.
• Make sure that the plugs are properly oriented. Do not insert or remove the plugs at
an angle when connecting or disconnecting them.
B Note
Do not use a USB cable other than the UC-E21. Using a USB cable other than the UC-E21
could result in overheating, fire or electric shock.
Charge lamp
Electrical outlet
USB cable (included)
• The charge lamp slowly flashes green to indicate that the battery is charging.
• About 1 hour and 50 minutes are required to charge a fully exhausted battery.
Disconnect the Charging AC Adapter from the electrical outlet and then
disconnect the USB cable.
First Steps
Step 4
Turn On the Camera
Press the power switch.
• The monitor turns on.
C The Auto Off Function
• The time that elapses before the camera enters standby mode is about one minute. The
time can be changed using the Auto off setting in the setup menu (A27).
• While the camera is in standby mode, the monitor turns back on if you perform any of the
following operations:
- Press the power switch, shutter-release button, A (shooting mode) button,
c (playback) button, or b (e movie-record) button.
First Steps
Step 5
Select a Language and Set the Camera Clock
When the camera is turned on for the first time, the language-selection screen and
the date and time setting screen for the camera clock are displayed.
Use the multi selector to make the settings.
• If you exit without setting the date and time, O will flash when the shooting
screen is displayed.
Choose time zone and
set date and time?
Use the multi selector HI to select
the desired language and press the k
Select your home time zone and press
the k button.
Select Yes and press the k button.
Daylight Saving Time
If daylight saving time is in effect, press H
to enable the daylight saving time function.
• When the daylight saving time
function is enabled, W is displayed
above the map.
• Press I to disable the daylight saving
time function.
First Steps
Date format
Date and time
Select the date format and press the
k button.
Date and time
15/05/2014 15 :30
Select Yes and press the k button.
• When settings are finished, the lens
extends and the camera switches to
shooting mode.
First Steps
Edit the date and time.
• Select a field: Press JK (changes
between D, M, Y, hour, and minute).
• Edit the date and time: Press HI.
• Confirm the settings: Select the
minute field and press the k
C Imprinting the Date and Time on Images While Taking Images
After setting the date and time, enable the Print date option in the z (setup) menu (A27).
Display the z (setup) menu using the following procedure and change the settings.
Press the d button ➝ press the multi selector J ➝ use HI to select the z (setup) menu
icon and press the k button ➝ use HI to select an item and press the k button.
C Changing the Current Date, Time, or Language
Just as described under “Imprinting the Date and Time on Images While Taking Images”
above, display the z (setup) menu (A27) and set Language or Time zone and date.
The next step explains basic shooting operations using x (scene auto selector) mode.
First Steps
Shooting and Playback
Step 1
Check the Battery Level and the Number of
Exposures Remaining
Battery Level Indicator
The battery level is high.
The battery level is low.
The camera cannot capture
Battery exhausted.
Recharge the battery.
Number of exposures
25m 0s
Battery level indicator
Number of Exposures Remaining
C is displayed when no memory card is inserted in the camera, and images are saved in
the internal memory.
Shooting and Playback
Step 2
Hold the Camera and Frame a Picture
Hold the camera steady in both hands.
• Keep fingers and other objects away from the lens, flash,
Frame the picture.
Shooting mode icon
• When the camera automatically determines the scene
mode, the shooting mode icon changes.
25m 0s
Using the Zoom
Move the zoom control.
• To zoom in closer to the subject, move the zoom control
toward g (telephoto).
• To zoom out and view a larger area, move the zoom
control toward f (wide-angle).
When you turn the camera on, the zoom moves to the maximum wide-angle position.
Shooting and Playback
Step 3
Focus and Shoot
Press the shutter-release button halfway, i.e.,
press the button lightly until you feel a slight
• When the subject is in focus, the focus area glows
green (multiple focus areas can glow green).
• When you are using digital zoom, the camera
focuses in the center of the frame and the focus
area is not displayed. When the camera has
focused, the focus indicator glows green.
• If the focus area or focus indicator flashes, the
camera is unable to focus. Modify the composition
and try pressing the shutter-release button halfway
Focus area Flash lamp
Flash lamp
The flash lamp indicates flash status when the shutter-release button is pressed halfway.
The flash fires when an image is taken.
The flash is charging.*
The flash does not fire when an image is taken.
* If the battery level is low, the monitor turns off while the flash is charging.
Shooting and Playback
Without lifting your finger, press the shutter-release button the
rest of the way down to take the picture.
• The shutter is released and the image is saved.
• If you press the shutter-release button with too much force, the camera
may shake, causing images to be blurred. Press the button gently.
Step 4
Play Back Images
Press the c (playback) button. The camera enters
playback mode.
• The last image captured is displayed in
full-frame playback mode.
A button
0004. JPG
15 / 05 / 2014 15:30
• Use the multi selector HIJK to display
previous or next images.
• To return to shooting mode, press the
A (shooting mode) button or shutter-release
Display the previous image
Display the next image
Shooting and Playback
Deleting Unwanted Images
To delete the image currently displayed in the monitor,
press the l (delete) button.
When the deletion screen is displayed, use the multi
selector HI to select Current image and press the k
0004. JPG
15 / 05 / 2014 15:30
When the confirmation dialog is displayed, select Yes
and press the k button to delete the image that is
Current image
Erase selected images
• After pressing the l button, use HI to select Erase
All images
selected images and select multiple images to be
deleted. Select All images to delete all images.
• Deleted images cannot be recovered. To cancel
without deleting, select No in the confirmation dialog and press the k button.
Shooting and Playback
Using ViewNX 2
Install ViewNX 2 to upload, view, edit, and share photos and movies.
Your Imaging Toolbox
Step 1
ViewNX 2™
Installing ViewNX 2
An Internet connection is required.
For system requirements and other information, see the Nikon website for your
Start the computer and download the ViewNX 2 installer from the URL below.
Double-click the installer file.
Using ViewNX 2
Follow the on-screen instructions to install the software.
Exit the install.
• Windows: Click Yes.
• Mac: Click OK.
Step 2
Transferring Images to the Computer
Choose how images will be copied to the computer.
Choose one of the following methods:
• Direct USB connection: Turn the camera off and ensure that the memory card is
inserted in the camera. Connect the camera to the computer using the USB cable. The
camera automatically turns on.
To transfer images that are saved in the camera’s internal memory, remove the
memory card from the camera before connecting it to the computer.
Using ViewNX 2
• SD card slot: If your computer is equipped with an SD card slot, the card can be
inserted directly in the slot.
• SD card reader: Connect a card reader (available separately from third-party
suppliers) to the computer and insert the memory card.
If a message is displayed prompting you to choose a program, select Nikon Transfer 2.
• When using Windows 7
If the dialog shown at right is displayed, follow
the steps below to select Nikon Transfer 2.
1 Under Import pictures and videos, click
Change program. A program selection
dialog will be displayed; select Import File
using Nikon Transfer 2 and click OK.
2 Double-click Import File.
If the memory card contains a large number of images, it may take a while for Nikon
Transfer 2 to start. Wait until Nikon Transfer 2 starts.
B Connecting the USB Cable
The connection may not be recognized if the camera is connected to the computer via a USB hub.
Using ViewNX 2
Transfer images to the computer.
• Click Start Transfer.
Start Transfer
• At default settings, all the images on the memory card will be copied to the computer.
Terminate the connection.
• If the camera is connected to the computer, turn the camera off and disconnect the
USB cable. If you are using a card reader or card slot, choose the appropriate option in
the computer operating system to eject the removable disk corresponding to the
memory card and then remove the card from the card reader or card slot.
Using ViewNX 2
Step 3
Viewing Images
Start ViewNX 2.
• Images are displayed in ViewNX 2 when transfer
is complete.
• Consult online help for more information on
using ViewNX 2.
C Starting ViewNX 2 Manually
• Windows: Double-click the ViewNX 2 shortcut on the desktop.
• Mac: Click the ViewNX 2 icon in the Dock.
Using ViewNX 2
Other Functions
Flash Mode, Self-Timer, Macro Mode, and
Exposure Compensation
Use the multi selector in shooting mode to apply the following settings. Availability
depends on the setting.
Flash Mode
The flash modes available are U (auto), V (auto with red-eye
reduction), W (off ), X (fill flash), and Y (slow sync) modes.
Exposure Compensation
Overall image brightness or darkness can be
adjusted by setting exposure compensation
before taking images.
Macro Mode
Use for close-ups. The camera can focus at a
closer distance when the zoom is at a position
where F and the zoom indicator glow green.
The camera is equipped with ten- and two-second timers.
Other Functions
Exposure compensation
Macro mode
Selecting a Shooting Mode
Press the A button in shooting mode to display
the shooting mode selection menu.
Select a shooting mode with the multi selector,
and press the k button to change to that mode.
Scene auto selector
1. x Scene auto selector mode (A15)
2. b Scene mode*
3. D Special effects mode*
4. F Smart portrait mode
5. A Auto mode
* The icon displayed differs depending on which scene or
effect was selected last.
Other Functions
Selecting a Playback Mode
Press the c button in playback mode to display
the playback mode selection menu.
Select a playback mode with the multi selector, and
press the k button to change to that mode.
Auto sort
1. G Playback mode (all images) (A17)
2. h Favorite pictures mode
3. F Auto sort mode
4. C List by date mode
Recording Movies
You can record movies by simply pressing the
b (e movie-record) button. Press the b (e
movie-record) button to start movie recording.
Press the b (e movie-record) button again to
stop movie recording.
Other Functions
Using Camera Menus
A variety of shooting and playback settings can be
adjusted from the camera menus.
Press the d button to display the menu for the
current mode and use the multi selector to select
an item (A11).
Select a menu icon on the left to switch to the menu of the
selected icon.
Press the d button again to exit the menu.
Image mode
White balance
ISO sensitivity
Color options
AF area mode
Autofocus mode
Switching Between Menu Icons
Shooting menu
Image mode
Image mode
Welcome screen
White balance
White balance
Time zone and date
Monitor settings
ISO sensitivity
ISO sensitivity
Print date
Color options
Color options
Photo VR
AF area mode
AF area mode
Motion detection
Autofocus mode
Autofocus mode
Press the multi selector
J to highlight a menu
Use the multi selector
HI to select another
menu icon, and press
either the k button or
AF assist
The selected menu is
Other Functions
Playback Mode
The following options are available in
full-frame playback mode.
0004. JPG
15 / 05 / 2014 15:30
Use the multi selector HIJK to display previous or
next images.
Select images
View thumbnails/
enable calendar
Zoom during
Play back movies
f (h)
g (i)
Apply effects to
Delete images
Display menus
Other Functions
Displays thumbnail playback mode. Move the zoom
control toward f (h) in the 16-image thumbnail
playback to apply the calendar display (except in list by
date mode).
Magnifies the image displayed in the monitor. Press the
k button to return to full-frame playback mode.
Plays back the movie currently displayed.
Press the k button when e is displayed on a still
image to select one of the displayed effects.
Allows you to delete images.
When using favorite pictures mode, auto sort mode, or
list by date mode, images with the same album, category,
or shooting date can be deleted.
Displays the menu for the selected mode.
Switch to another
playback mode
Displays the playback mode selection menu, allowing
you to switch to favorite pictures mode, auto sort mode,
or list by date mode.
Switch to
shooting mode
Press the A button, shutter-release button, or b (e
movie-record) button to switch to shooting mode.
Other Functions
For Your Safety
To prevent damage to your Nikon product or injury to yourself or to others, read the
following safety precautions in their entirety before using this equipment. Keep these
safety instructions where all those who use the product will read them.
The consequences that could result from failure to observe the precautions listed in this
section are indicated by the following symbol:
This icon marks warnings, information that should be read before using this
Nikon product, to prevent possible injury.
Turn off in the event of malfunction
Should you notice smoke or an unusual
smell coming from the camera or Charging
AC Adapter, unplug the Charging AC
Adapter and remove the battery
immediately, taking care to avoid burns.
Continued operation could result in injury.
After removing or disconnecting the
power source, take the equipment to a
Nikon-authorized service representative for
For Your Safety
Do not disassemble
Touching the internal parts of the camera
or Charging AC Adapter could result in
injury. Repairs should be performed only by
qualified technicians. Should the camera or
Charging AC Adapter break open as the
result of a fall or other accident, take the
product to a Nikon-authorized service
representative for inspection, after
unplugging the product and/or removing
the battery.
Do not use the camera or Charging
AC Adapter in the presence of
flammable gas
Do not use electronic equipment in the
presence of flammable gas, as this could
result in explosion or fire.
Handle the camera strap with care
Never place the strap around the neck of
an infant or child.
Keep out of reach of children
Particular care should be taken to prevent
infants from putting the battery or other
small parts into their mouths.
Do not remain in contact with the
camera, Charging AC Adapter, or
AC adapter for extended periods
while the devices are on or in use
Parts of the devices become hot. Leaving
the devices in direct contact with the skin
for extended periods may result in lowtemperature burns.
Do not leave the product where it
will be exposed to extremely high
temperatures, such as in an
enclosed automobile or in direct
Failure to observe this precaution could
cause damage or fire.
Observe caution when handling
the battery
The battery may leak, overheat, or explode
if improperly handled. Observe the
following precautions when handling the
battery for use in this product:
• Before replacing the battery, turn the
product off. If you are using the Charging
AC Adapter/AC adapter, be sure it is
• Use only a Rechargeable Li-ion Battery
EN-EL19 (included). Charge the battery
by using a camera that supports battery
charging. To perform this operation, use
the Charging AC Adapter EH-71P
(included) and USB cable UC-E21
(included). The Battery Charger MH-66
(available separately) is also available to
charge the battery without using a
For Your Safety
• When inserting the battery, do not
attempt to insert it upside down or
• Do not short or disassemble the battery
or attempt to remove or break the battery
insulation or casing.
• Do not expose the battery to flame or to
excessive heat.
• Do not immerse in or expose to water.
• Put the battery in a plastic bag, etc. in
order to insulate it before transporting.
Do not transport or store with metal
objects such as necklaces or hairpins.
• The battery is prone to leakage when fully
discharged. To avoid damage to the
product, be sure to remove the battery
when no charge remains.
• Discontinue use immediately should you
notice any change in the battery, such as
discoloration or deformation.
• If liquid from the damaged battery comes
in contact with clothing or skin, rinse
immediately with plenty of water.
For Your Safety
Observe the following precautions
when handling the Charging AC
Keep dry. Failure to observe this
precaution could result in fire or electric
Dust on or near the metal parts of the
plug should be removed with a dry cloth.
Continued use could result in fire.
Do not handle the plug or go near the
Charging AC Adapter during lightning
storms. Failure to observe this precaution
could result in electric shock.
Do not damage, modify, forcibly tug or
bend the USB cable, place it under heavy
objects, or expose it to heat or flames.
Should the insulation be damaged and
the wires become exposed, take it to a
Nikon-authorized service representative
for inspection. Failure to observe these
precautions could result in fire or electric
Do not handle the plug or Charging AC
Adapter with wet hands. Failure to
observe this precaution could result in
electric shock.
• Do not use with travel converters or
adapters designed to convert from one
voltage to another or with DC-to-AC
inverters. Failure to observe this
precaution could damage the product or
cause overheating or fire.
Use the appropriate power supply
(battery, Charging AC adapter, AC
adapter, USB cable)
Using a power supply other than those
provided or sold by Nikon could result in
damage or malfunction.
Use appropriate cables
When connecting cables to the input and
output jacks, use only the cables provided or
sold by Nikon for the purpose, to maintain
compliance with product regulations.
Handle moving parts with care
Be careful that your fingers or other objects
are not pinched by the lens cover or other
moving parts.
Using the flash close to your
subject’s eyes could cause
temporary visual impairment
The flash should be no less than 1 meter (3
ft 4 in.) from the subject.
Particular care should be observed when
photographing infants.
Do not operate the flash with the
flash window touching a person or
Failure to observe this precaution could
result in burns or fire.
Avoid contact with liquid crystal
Should the monitor break, care should be
taken to avoid injury caused by broken
glass and to prevent liquid crystal from the
monitor touching the skin or entering the
eyes or mouth.
Turn the power off when using
inside an airplane or the hospital
Turn the power off while inside the airplane
during take off or landing. Do not use
wireless network functions while in the air.
Follow the instructions of the hospital
when using while in a hospital. The
electromagnetic waves emitted by this
camera may disrupt the electronic systems
of the airplane or the instruments of the
hospital. If you are using an Eye-Fi card,
remove it from the camera before
boarding an aircraft or entering a hospital.
For Your Safety
Notices for Customers in
This symbol indicates that
electrical and electronic
equipment is to be collected
The following apply only to users
in European countries:
• This product is designated for separate
collection at an appropriate collection
point. Do not dispose of as household
• Separate collection and recycling helps
conserve natural resources and prevent
negative consequences for human
health and the environment that might
result from incorrect disposal.
• For more information, contact the
retailer or the local authorities in charge
of waste management.
This symbol on the battery
indicates that the battery is to be
collected separately.
The following apply only to users
in European countries:
• All batteries, whether marked with this
symbol or not, are designated for
separate collection at an appropriate
collection point. Do not dispose of as
household waste.
• For more information, contact the
retailer or the local authorities in charge
of waste management.
Caring for the Camera
To ensure continued enjoyment of this
Nikon product, observe the precautions
described below in addition to the
warnings in “For Your Safety” (A30-33)
when using or storing the device.
Do Not Drop
The product may malfunction if subjected
to strong shock or vibration.
Handle the Lens and All Moving
Parts with Care
Do not apply force to the lens, lens cover,
monitor, memory card slot, or battery
chamber. These parts are easily damaged.
Applying force to the lens cover could
result in camera malfunction or damage to
the lens. Should the monitor break, care
should be taken to avoid injury caused by
broken glass and to prevent the liquid
crystal from the display touching the skin
or entering the eyes or mouth.
Avoid Sudden Changes in
Sudden changes in temperature, such as
when entering or leaving a heated
building on a cold day, can cause
condensation to form inside the device. To
prevent condensation, place the device in
a carrying case or a plastic bag before
exposing it to sudden changes in
Keep Away from Strong Magnetic
Do not use or store this device in the
vicinity of equipment that generates
strong electromagnetic radiation or
magnetic fields. Strong static charge or the
magnetic fields produced by equipment
such as radio transmitters could interfere
with the monitor, damage data saved on
the memory card, or affect the product’s
internal circuitry.
Keep Dry
The device will be damaged if immersed in
water or subjected to high humidity.
Do Not Point the Lens at Strong
Light Sources for Extended
Avoid pointing the lens at the sun or other
strong light sources for extended periods
when using or storing the camera. Intense
light may cause deterioration of the image
sensor, producing a white blur effect in
Turn the Product Off Before
Removing or Disconnecting the
Power Source or Memory Card
Do not remove the battery while the
product is on, or while images are being
saved or deleted. Forcibly cutting power in
these circumstances could result in loss of
data or in damage to product memory or
internal circuitry.
Notes About the Monitor
• Monitors and electronic viewfinders are
constructed with extremely high
precision; at least 99.99% of pixels are
effective, with no more than 0.01%
being missing or defective. Hence while
these displays may contain pixels that
are always lit (white, red, blue, or green)
or always off (black), this is not a
malfunction and has no effect on
images recorded with the device.
• Images in the monitor may be difficult
to see under bright lighting.
• The monitor is lit by an LED backlight.
Should the monitor begin to dim or
flicker, contact your Nikon-authorized
service representative.
About the Manuals
Nikon will not be held liable for any
damages resulting from the use of this
Before Taking Important
Before taking images on important
occasions (such as at weddings or before
taking the camera on a trip), take a test shot
to ensure that the camera is functioning
normally. Nikon will not be held liable for
damages or lost profits that may result
from product malfunction.
Disposing of Data Storage
Please note that deleting images or
formatting data storage devices such as
memory cards or built-in camera memory
does not completely erase the original
image data. Deleted files can sometimes
be recovered from discarded storage
devices using commercially available
software, potentially resulting in the
malicious use of personal image data.
Ensuring the privacy of such data is the
user’s responsibility.
Before discarding a data storage device or
transferring ownership to another person,
erase all data using commercial deletion
software, or format the device and then
completely refill it with images containing
no private information (for example,
images of empty sky). Be sure to also
replace any images selected for the Select
an image option in the Welcome screen
setting. Care should be taken to avoid
injury or damage to property when
physically destroying data storage devices.
To delete the Wi-Fi settings, select Restore
default settings in the Wi-Fi options
Wi-Fi (Wireless LAN
This product is controlled by the United
States Export Administration Regulations,
and you are required to obtain permission
from the United States government if you
export or re-export this product to any
country to which the United States
embargoes goods. The following countries
were subject to embargo: Cuba, Iran, North
Korea, Sudan, and Syria. Since the target
countries are subject to change, please
contact the United States Department of
Commerce for the latest information.
Restrictions on Wireless Devices
The wireless transceiver included in this
product conforms to wireless regulations
in the country of sale and is not for use in
other countries (products purchased in the
EU or EFTA can be used anywhere within
the EU and EFTA). Nikon does not accept
liability for use in other countries. Users
who are unsure as to the original country of
sale should consult with their local Nikon
service center or Nikon-authorized service
representative. This restriction applies to
wireless operation only and not to any
other use of the product.
Declaration of Conformity (Europe)
Hereby, Nikon Corporation, declares that
COOLPIX S6800 is in compliance with the
essential requirements and other relevant
provisions of Directive 1999/5/EC. The
declaration of conformity may be
consulted at (
Precautions when Using Radio
• Always keep in mind that radio
transmission or reception of data is
subject to interception by third parties.
Note that Nikon is not responsible for
data or information leaks that may occur
during data transfer.
delete all user information registered and
configured with the product, including
wireless LAN connection settings and
other personal information.
Personal Information Management and
• User information registered and
configured on the product, including
wireless LAN connection settings and
other personal information, is susceptible
to alteration and loss resulting from
operational error, static electricity,
accident, malfunction, repair or other
handling. Always keep separate copies of
important information. Nikon is not
responsible for any direct or indirect
damages or lost profits resulting from
alteration or loss of content that is not
attributable to Nikon.
• Before discarding this product or
transferring it to another owner, perform
Reset all in the setup menu (A27) to
AVC Patent Portfolio License
This product is licensed under the AVC
Patent Portfolio License for the personal
and non-commercial use of a consumer to
(i) encode video in compliance with the
AVC standard (“AVC video”) and/or (ii)
decode AVC video that was encoded by a
consumer engaged in a personal and noncommercial activity and/or was obtained
from a video provider licensed to provide
AVC video. No license is granted or shall be
implied for any other use. Additional
information may be obtained from MPEG
LA, L.L.C.
Trademark Information
• Microsoft, Windows and Windows Vista
are either registered trademarks or
trademarks of Microsoft Corporation in
the United States and/or other countries.
• Mac, OS X, the iFrame logo and the
iFrame symbol are trademarks or
registered trademarks of Apple Inc., in the
U.S. and other countries.
• Adobe and Acrobat are registered
trademarks of Adobe Systems Inc.
• SDXC, SDHC, and SD Logos are
trademarks of SD-3C, LLC.
• PictBridge is a trademark.
• HDMI, HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing
• Wi-Fi and the Wi-Fi logo are trademarks or
registered trademarks of the Wi-Fi
• Android and Google Play are trademarks
or registered trademarks of Google, Inc.
• All other trade names mentioned in this
manual or the other documentation
provided with your Nikon product are the
trademarks or registered trademarks of
their respective holders.
FreeType License (FreeType2)
• Portions of this software are copyright ©
2012 The FreeType Project (http:// All rights reserved.
MIT License (HarfBuzz)
• Portions of this software are copyright ©
2014 The HarfBuzz Project (http://
HarfBuzz). All rights reserved.
Warranty Terms - Nikon Europe
Service Warranty
Dear Nikon Customer,
We thank you for your purchasing this Nikon product. Should your Nikon product require
warranty service, please contact the dealer from whom it was purchased or a member of
our authorized service network within the sales territory of Nikon Europe BV (Europe/
Africa and Russia).
In order to avoid any unnecessary inconvenience, we advise you to read the user manuals
carefully before contacting the dealer or our authorized service network.
Your Nikon equipment is guaranteed against any manufacturing defects for one full year
from the date of original purchase. If during this period of guarantee the product proves
defective due to improper material or workmanship, our authorized service network
within the sales territory of Nikon Europe BV will, without charge for labor and parts, repair
the product in the terms and conditions set as below. Nikon reserves the right (at its sole
discretion) to replace or repair the product.
1. This warranty is only provided upon presentation of the completed warranty card and
original invoice or purchase receipt indicating the date of purchase, product type and
dealer’s name, together with the product. Nikon reserves the right to refuse free-ofcharge warranty service if the above documents cannot be presented or if the
information contained in it is incomplete or illegible.
2. This warranty will not cover:
• necessary maintenance and repair or replacement of parts due to normal wear and
Warranty Terms - Nikon Europe Service Warranty
• modifications to upgrade the product from its normal purpose as described in user
manuals, without the prior written consent of Nikon.
• transport costs and all risks of transport relating directly or indirectly to the warranty
of the products.
• any damage resulting from modifications or adjustments which may be made to the
product, without the prior written consent of Nikon, in order to comply with local or
national technical standards in force in any other country than the ones for which
the product was originally designed and/or manufactured.
3. The warranty will not be applicable in the case of:
• damage caused by misuse including but not limited to failure to use the product for
its normal purpose or according to the user instructions on the proper use and
maintenance, and to installation or use of the product inconsistent with the safety
standards in force in the country where it is used.
• damage caused by accidents including but not limited to lightning, water, fire,
misuse or neglect.
• defacing, illegibility or removal of the model or serial number on the product.
• damage resulting from repairs or adjustments which have been conducted by
unauthorized service organizations or persons.
• defects in any system into which the product is incorporated or with which it is used.
4. This service warranty does not affect the consumer’s statutory rights under applicable
national laws in force, nor the consumer’s right against the dealer arising from their
sales/purchase contract.
Notice: An overview of all authorized Nikon Service Stations can be found online by
following this Link (URL = ).
Warranty Terms - Nikon Europe Service Warranty
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF