Westinghouse WRC613S User Manual

Westinghouse WRC613S User Manual
INSTALLATION AND USER MANUAL
WRC613S Canopy Rangehood
WRC913S Canopy Rangehood
CONGRATULATIONS
CONTENTS
Congratulations and thank you for choosing our canopy
rangehood. We are sure you will find your new rangehood
a pleasure to use. Before you use your rangehood, we
recommend that you read through the whole user manual,
which provides the description of the rangehood and
its function.
To avoid the risks that are always present when you use an
electrical appliance it is important that the canopy
rangehood is installed correctly and that you read the
safety instructions carefully to avoid misuse and hazards.
We recommend that you keep this instruction booklet for
future reference and pass it on to any future owners. After
unpacking the canopy rangehood please check it is not
damaged. If in doubt, do not use the appliance but contact
your local Electrolux Service Centre.
Important safety instructions . .
Description of your rangehood
Components list . . . . . . . . . .
Technical specifications . . . . .
Rangehood dimensions . . . . .
Installation . . . . . . . . . . . . . .
Using your rangehood . . . . . .
Care & maintenance . . . . . . .
Troubleshooting . . . . . . . . . .
Optional ducting accessories .
Warranty . . . . . . . . . . . . . .
Conditions of use
This appliance is intended to be used in household and
similar applications such as:
• Staff kitchen areas in shops, offices and other
working envionments
• Farm houses
• By clients in hotels, motels and other residential
type environments
• Bed and breakfast type environments.
Record model and serial number here:
Model:
Serial No:
TIPS & INFORMATION
IMPORTANT – CHECK FOR ANY DAMAGES OR MARKS. If you find
the rangehood is damaged or marked, you must report it
within 7 days if you wish to claim for damage/marks under
the manufacturers warranty. This does not affect your
statutory rights.
UNPACKING
Check that the cooker hood has no damage.Transportation
damage should immediately be reported to the company
responsible for the transportation.
Damage, faults and missing details should immediately be
reported to the retailer. Take care of the packing materials so
that small children cannot play with them.
ENVIRONMENTAL TIPS
INFORMATION ON DISPOSAL FOR USERS
• Most of the packing materials are recyclable. Please
dispose of those materials through your local recycling depot
or by placing them in appropriate collection containers.
• If you wish to discard this product, please contact your
local authorities and ask for the correct method of disposal.
2
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
..
..
..
..
..
.
..
..
..
..
..
.
.
.
.
.
.
.
.
.
.
.
. 3
. 4
. 4
. 4
. 5
. 6
11
11
13
14
15
IMPORTANT SAFETY INSTRUCTIONS
This manual explains the proper use of your new
Westinghouse canopy rangehood. Please read this manual
carefully before using the product. This manual should be
kept in a safe place for handy reference.
This canopy rangehood is a domestic appliance which has
been manufactured and tested to comply with Australian
and New Zealand Standard AS/NZS 60335.2.31.
Meanings of symbols used in this manual are shown below:
CAUTION
This symbol indicates the possibility of injury or damage to property
This symbol indicates never to do this
This symbol indicates always do this
TIPS & INFORMATION
This symbol indicates tips and information about use of the appliance
ENVIRONMENTAL TIPS
This symbol indicates tips and information about economical and
ecological use of the appliance
CAUTION
Read the following carefully to avoid an electric shock or fire.
GENERAL WARNINGS
The appliance must be plugged into its own
dedicated 220-240V, 50Hz AC electrical outlet.
Always cover lit gas burners with pots or pans when
canopy rangehood is in use.
Always switch off gas burners before you remove pots
or pans.
Do not leave lit gas burners exposed due to the risk
of fire. (Fig 2)
ELECTRICAL CONNECTION
Check that the mains voltage matches with the voltage on
the data plate inside the canopy rangehood. Check that the
installation complies with standards of local building, gas
and electrical authorities. Before connecting to the mains
supply ensure that the mains voltage corresponds to the
voltage on the rating plate inside the cooker hood.
If the supply cord is damaged, it must be replaced by
the manufacturer or its service agent or similarly qualified
person in order to avoid a hazard.
SAFETY WARNINGS – FOR THE INSTALLER
When installing the cooker hood, make sure you adhere to
the minimum and maximum distances from the cooker hood
base to the hob surface (refer to page 5).
Exhaust flue installation: The following rules must be
strictly followed to obtain optimal air extraction.
• Keep exhaust flue short and straight
• Do not reduce the size or restrict exhaust flue.
• Keep bends in the exhaust flue to a minimum.
• When using flexible flue always install duct with helix
pulled taut to minimise pressure loss.
• Failure to observe these basic instructions will drastically
reduce the performance and increase the noise levels of
the cooker hood.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning the use of the appliance by
a person responsible for their safety.
Exhaust air must not be discharged into a wall cavity, unless
the cavity is designed for that purpose.
The exhaust from the cooker hood must not be discharged
into any heating flue, which may carry combustion products
from other sources.
Ensure the canopy rangehood is switched off before
carrying out maintenance, to avoid any possibility of
electric shock.
NOTE: Some installations may require the telescopic
exhaust cover to be cut to length. Cut with sharp tin snips
or a fine-tooth hack saw blade, taking care not to distort or
dent the exhaust cover.
Never carry out flambé cooking under the canopy
rangehood.
This canopy rangehood is not recommended for
barbecues and cannot be installed for external use.
Grease filters must be removed every four weeks
(maximum) for cleaning to reduce the risk of fire.
The exhaust from the canopy rangehood must not
be discharged into any heating flue, which may
carry combustion products from other sources. (Fig1)
Exhaust air must not be discharged into a wall cavity,
unless the cavity is designed for the purpose.
There must be adequate ventilation of the room when
the canopy rangehood is used at the same time as
appliances burning gas or other fuels.
Fig. 1
Fig. 2
3
DESCRIPTION OF YOUR RANGEHOOD
1
2
3
4
5
6
Fig. 3
Components list
1.
2.
3.
4.
5.
6.
6.
Telescopic flue cover set - - - - - - Upper Flue mounting bracket - - - - Lower Flue mounting bracket - - - - Flue transition duct - - - - - - - - - Main body and fan housing assembly Grease filter(WRC613S) - - - - - - Grease filter(WRC913S) - - - - - - -
-
-
-
-
-
-
-
Qty.
- -1
- -1
- -1
- -1
- -1
- -2
- -3
Additional items required for installation
• Fixings required to attach rangehood body and anti
tilt points
• Fixings required to attach flue cover mounting brackets
• Worm drive clamps, Duct tape or cable ties
• Ducting accessories
Technical specification
• Power supply: 240 Volts 50 Hz. Connects to 10A power
point
• Lights: 2 x 4 watt, 240 volts LED
MODEL
WRC613S
WRC913S
Height
660 mm – 1,160 mm
660 mm – 1,160 mm
Width
600 mm
900 mm
Depth
500 mm
500 mm
Max absorbed power
Lighting
Outlet diameter
Electrical connection
338 W
338 W
2 x 4W LED (GU10 fitting)
2 x 4W LED (GU10 fitting)
150 mm
150 mm
220 – 240V, 50 Hz
220 – 240V, 50 Hz
The manufacturer reserves the right to make technical changes.
4
RANGEHOOD DIMENSIONS
WRC613S
320
520
600
320
290
625
Min 660 / Max1160
290
625
Min 660 / Max1160
320
WRC913S
500
780
900
320
500
Fig. 4
5
INSTALLATION
PRE-INSTALLATION
Before installing the cooker hood, peel off any protective plastic covering and remove polystyrene from inside behind
the fan motor. See Fig. 5 below.
Fig. 5
LOCATION
The hood is to be mounted on the wall. When installed, the hood must be not less than 60cm above electric burners or
65cm above gas or mixed-fuel burners.
Distance from hood base to top of hob
hob type
minimum*
maximum
gas
650mm
800mm
electric
600mm
800mm
* If the instructions of the hob specify a greater distance than the minimum above, then that shall be the minimum height
for installation.
6
INSTALLATION
1. Using a spirit level mark a vertical centre line on the wall where the hood is to be positioned, and a horizontal line
at the hood base position. (See Figure 4 for relevant model)
NOTE. The height of the underside of the hood body must be a minimum of 600mm* to a maximum height of 800mm.
* If the instructions of the hob specify a greater distance than the minimum above, then that shall be the minimum
height for installation.
2. Mark the location for the flue cover wall mounting brackets and rangehood mounting points and anti-tilt fixing
points above the hood base using the hood base as a reference point
250 mm
130 mm
ceiling
Max. 1160 mm
230mm
Range hood
mounting points
307 mm
587 mm
250 mm
Flue cover wall
mounting brackets
Anti tilt fixing point
51 mm
B
A
Min. 600 mm*
Max. 800 mm
Top of hob
WRC613S
WRC913S
A
600 mm
900 mm
B
440 mm
550 mm
Fig. 6
7
INSTALLATION
3. Install flue cover wall mounting brackets with suitable
fixings. Install suitable screws for rangehood mounting
points (to support a total weight of 30kg) to the wall as
marked (Fig. 7).
A
4. Fix exhaust transition duct using screws supplied (Fig. 8).
B
Fig. 8
2mm
Fig. 7
5. Hang the body hood on the mounting screws then
secure at the anti-tilt locations as indicated in Fig. 6 & 7.
A
B
Fig. 9
8
INSTALLATION
Depending on the preferred installation/ducting mode,
follow step 6a or 6b below.
6a.Recirculating mode (Fig. 10). Using the centre line,
secure the recirculating T-piece to the wall with suitable
screws/fixings (optional kit AR910RK). Install flexible
pipe between T-piece and the exhaust transition duct.
Use cable ties or suitable duct tape to secure flexible
pipe to T-piece and transition duct (Fig. 12).
NOTE: When installed in recirculating mode, it is
recommended to use a carbon filter (included in
recirculation kit AR910RK) to prevent odours being
emitted back into the room.
6b.Ducted mode (Fig 11.) Fit a 150mm diameter non
combustible flue pipe. Continue the centre line to the ceiling.
Fit flue pipe to the fan transition duct. Use cable ties or
suitable duct tape to secure flue pipe to the transition duct.
NOTE: For ducted mode, extend the flue pipe through
the roof to external ‘china hat’ to vent exhaust externally.
Do not vent into the ceiling cavity.
NOTE: To ensure optimum performance of the
rangehood, the use of rigid ducting is recommended.
The use of bends should be avoided. Rigid flexible
ducting is suitable, although loose flexible ducting is
unacceptable. All ducting must be fire retardant.
Fig. 10
Fig. 11
Fig. 12
9
INSTALLATION
7. Electrical connection
Check that the installation complies with the standards
of local building, gas and electrical authorities. Before
connecting to the mains supply ensure that the mains
voltage corresponds to the voltage on the rating plate
inside the rangehood.
Fig. 14
Fig. 13
Fig. 15
CAUTION
8. Installation of telescopic flue covers
Separate the inner and outer flue covers, and carefully
remove the protective coating from both. Carefully
reassemble the upper and lower flue covers sections by
sliding the inner into the outer flue cover. Carefully lower
the assembled upper and lower flue covers onto the top
of the rangehood body, and insert the flue cover into the
rangehood body approximately 5mm. Fix upper flue cover
to the wall mounting bracket with screws supplied. Ensure
that the upper section is extended.
10
Care must be taken to ensure the screws are not cross
threaded when attaching the upper flue cover.
If installed in recirculating mode, insert the optional carbon
filter (included in recirculation kit AR910RK).
To complete the rangehood installation, insert the filters to
the underside of the hood body. Place back edge of filter
into position and push up front edge so that the filter clips
into place.
Your Westinghouse rangehood is now ready to use.
CONTROL PANEL
CARE & MAINTENENCE
• Best results are obtained by using a low speed for
normal conditions and a high speed when odours are
more concentrated.
• Turn the hood on for a few minutes before you
start cooking.
• The hood should be left on for a minimum of 5 minutes
after cooking or until all odours have dispersed.
• The control switches are located on the front panel of the
unit. See Fig. 16 below.
A
B
C
D
E
F
G
Fig. 16
A.
Filter
• This is the indicator/switch to show when the filter needs
to be cleaned .
• Once the filters are cleaned the “Filter” alert can be
deactivated with a single touch.
B.
Timer
Using the Timer
• At the end of cooking, if the timer is switched on, the
rangehood will continue to run for an additional 5 to15
minutes, depending on the selected fan speed .
• The fan speed is reduced in 5 minute increments until the
rangehood turns it self OFF.
• If the fan speed is set on high, it will run for 5 minutes
then reduce to medium for 5 minutes, then reduce to low
for 5 minutes bef ore finally turning it self OFF.
• This should ensure the removal of any odours that remain
after cooking.
CAUTION
External surfaces are susceptible to scratches and
abrasions, so please follow the cleaning instructions
to ensure the best possible result is achieved without
damage.
Cleaning the hood
• Clean the outside of the hood using a damp cloth and
a solution of water and mild washing up liquid. Clean
stainless steel surfaces using non-abrasive cleaning
products that are specifically for use on stainless steel.
To ensure the best results also use an even pressure and
follow the grain of the stainless steel. Use of a soft cloth
reduces the risk of scratching. If the cloth is wet ensure
that a dry soft cloth is used to wipe down the surface
and apply stainless steel protector to reduce the risk of
any surface rust appearing.
• Never use corrosive, abrasive or flammable cleaning
products or products containing bleach.
• Never insert pointed objects in the motor’s
protective grid.
• Only ever clean the switch panel and filter grill using a
damp cloth and mild washing up liquid.
• It is extremely important to clean the unit and change the
filters at the recommended intervals. Failure to do so will
cause grease deposits that could cause a fire.
Removing the metal grease filters
• Push the grease filter towards the back of the unit and
then pull it down and out.
C.
Lights
To switch Lights ON and OFF
• Touch the 'light' symbol to turn the lights ON, if adjustment
to light intensity is required continue to touch and hold
until required brightness is achieved .
• Touch 'light' symbol again to turn the lights OFF.
D.
Power on/off
E.
Fan speed 1- light frying/boiling
F.
Fan speed 2- frying/wok cooking/heavy boiling
G.
Fan speed 3- grilling, intensive frying and wok
cooking
NOTE. This product is fitted with a safety cutout device.
If the cooker hood is installed to close to the cooktop, flambe cooking, operating the cooktop without cooking utensils and
blocked filters may activate the safety cutout device. If the hood stops during operation, correct the faults and allow time
for the safety cutout device to reset, the cooker hood will then function correctly.
11
CARE & MAINTENENCE
Hand washing
Soak grease filters for about one hour in hot water with a
grease-loosening cleaner, then rinse off thoroughly with hot
water. Repeat the process if necessary. Refit the grease filters
when they are dry.
CAUTION
IMPORTANT: The hood must always be disconnected
from the electricity supply before beginning any
maintenenace work.
IMPORTANT: Ensure lamp is cool before removing
Dishwasher
Place grease filters in the dishwasher. Select the most
powerful washing program and highest temperature, at
least 65°C. Repeat the process. Refit the grease filters when
they are dry. When washing the metal grease filter in the
dishwasher a slight discolouration of the filter can occur, this
does not have any impact on it’s performance.
Changing the halogen lamps
If halogen lamps need replacing, they must be replaced by
lamps with an aluminium reflector, never dichroic lamps to
avoid unnecessary overheating in the lamp holders.
NOTE: The metal grease filters must be removed and
washed,either by hand or in the dishwasher, every four weeks.
• Clean the inner housing using warm water and grease
loosing cleaner (never use caustic detergents, abrasive
powders or brushes).
Charcoal filter
• The charcoal filter should only be used if you want to use
the hood in the recirculation function.
• This filter cannot be cleaned or re-used and as a general
rule, the activated charcoal filter should be changed once
every four months.
Fitting the charcoal filter
Fit one charcoal filter on the left and one on the right so as
to cover the plastic grids that protect the fan wheel.
• Always specify the hood model code number and
serial number when ordering replacement filters. This
information is shown on the registration plate located on
the inside of this unit.
• Replacement charcoal filters can be ordered from your
local Service Centre.
Ensure that the appliance is switched off before carrying
out maintenance to avoid any possibility of electric shock.
CAUTION
When replacing lamps hold with a cloth or gloves to
ensure perspiration does not come into contact with the
lamp as this can reduce the life of the lamp.
12
TROUBLESHOOTING GUIDE
PROBLEM
The cooker hood will not start
REMEDY
Check that the hood is connected to an electrical supply
Check that a fan speed has been selected
Check that the fan speed is set high enough for the task
The grease filters are clean
The kitchen is adequately vented to allow the entry of fresh air
The cooker hood is not working
If set up for recirculation, check that the charcoal filter is still effective
If set up for extraction, check that the ducting and outlets are not blocked
Do not operate cooktop without pots/pans
Do not flambe under cooktop
The cooker hood has switched off
during operation
The safety cut-out device has been tripped – turn off the hob and wait for the device
to reset. If the hood has been installed below the heights indicated in the installation
instructions the motor will cut out frequently which will damage the hood
If you have completed all of the above checks and are still experiencing difficulty, please contact your local Electrolux
Service Centre.
NOTE: This product is fitted with a safety cutout device.
• If the cooker hood is installed to close to the cooktop, flambe cooking, operating the cooktop without cooking
utensils and blocked filters may activate the safety cutout device. If the hood stops during operation, correct the faults
and allow time for the safety cutout device to reset, the cooker hood will then function correctly.
• Do not operate cooktop without pots/pans
• Do not flambe under cooktop
13
OPTIONAL DUCTING ACCESSORIES
AR150RC
AR150F
AR610FS
AR150WV
AR910RK
AR610CF
Part Numbers
Description
AR150RC
150mm G/Bond Roof Cowl
AR150F
150mm G/Bond Flue 1200mm
AR150WV
150mm Wall Vent & duct
AR910RK
Recirculating Kit (150-120mm reducer,
T-piece & carbon filters
AR610CF
Replacement carbon filter
AR610FS
Stainless steel exhaust cover extension 1200mm
14
Warranty
FOR SALES IN AUSTRALIA AND NEW ZEALAND
APPLIANCE: RANGEHOOD
This document sets out the terms and conditions of the product
warranties for Electrolux Appliances. It is an important document.
Please keep it with your proof of purchase documents in a safe place for
future reference should you require service for your Appliance.
1. In this warranty
(a) ‘acceptable quality’ as referred to in clause 10 of this warranty has the
same meaning referred to in the ACL;
(b) ‘ACL’ means Trade Practices Amendment (Australian Consumer
Law) Act (No.2) 2010;
(c) ‘Appliance’ means any Electrolux product purchased by you
accompanied by this document;
‘major failure’ as referred to in clause 10 of this warranty has the same
meaning referred to in the ACL and includes a situation when an
Appliance cannot be repaired or it is uneconomic for Electrolux, at its
discretion, to repair an Appliance during the Warranty Period;
(g) ‘Warranty Period’ means:
where the Appliance is used for personal, domestic or household
use (i.e. normal single family use) as set out in the instruction
manual, the Appliance is warranted against manufacturing defects
in Australia for 24 months and in New Zealand for 24 months,
following the date of original purchase of the Appliance;
(ii) where the Appliance is used for commercial purposes (including
being used to directly assist a business or where the Appliance is
used in a multi-family communal or share type environment), the
Appliance will then be warranted against manufacturing defects in
Australia for 3 months and in New Zealand for 3 months, following
the date of original purchase of the Appliance.
(h) ‘you’ means the purchaser of the Appliance not having purchased the
Appliance for re-sale, and ‘your’ has a corresponding meaning.
2.
You may not make a claim under this warranty unless the defect claimed
is due to faulty or defective parts or workmanship. Electrolux is not liable in
the following situations (which are not exhaustive):
(a) the Appliance is damaged by:
(i)
accident
(ii) misuse or abuse, including failure to properly maintain or service
(iii) normal wear and tear
(v) incomplete or improper installation
(e) ‘Electrolux’ means Electrolux Home Products Pty Ltd of 163
O’Riordan Street, Mascot, NSW 2020, ABN 51 004 762 341 in respect
of Appliances purchased in Australia and Electrolux (NZ) Limited of 3-5
Niall Burgess Road, Mount Wellington, in respect
of Appliances purchased in New Zealand;
(i)
7.
(iv) power surges, electrical storm damage or incorrect power supply
(d) ‘ASC’ means Electrolux’ authorised serviced centres;
(f)
6. Proof of purchase is required before you can make a claim under
this warranty.
This warranty only applies to Appliances purchased and used in Australia
or New Zealand and is in addition to (and does not exclude, restrict, or
modify in any way) any non-excludable statutory warranties in Australia or
New Zealand.
3. During the Warranty Period Electrolux or its ASC will, at no extra charge
if your Appliance is readily accessible for service, without special
equipment and subject to these terms and conditions, repair or replace
any parts which it considers to be defective. Electrolux or its ASC may use
remanufactured parts to repair your Appliance. You agree that any replaced
Appliances or parts become the property of Electrolux. This warranty does
not apply to light globes, batteries, filters or similar perishable parts.
4. Parts and Appliances not supplied by Electrolux are not covered by
this warranty.
5. You will bear the cost of transportation, travel and delivery of the Appliance
to and from Electrolux or its ASC. If you reside outside of the service area,
you will bear the cost of:
(vi) incorrect, improper or inappropriate operation
(vii) insect or vermin infestation
(viii) failure to comply with any additional instructions supplied with the
Appliance;
(b) the Appliance is modified without authority from Electrolux in writing;
(c) the Appliance’s serial number or warranty seal has been removed
or defaced;
(d) the Appliance was serviced or repaired by anyone other than
Electrolux, an authorised repairer or ASC.
8. This warranty, the contract to which it relates and the relationship between
you and Electrolux are governed by the law applicable where the Appliance
was purchased. Where the Appliance was purchased in New Zealand for
business purposes the Consumer Guarantee Act does not apply.
9. To the extent permitted by law, Electrolux excludes all warranties and
liabilities (other than as contained in this document) including liability for
any loss or damage whether direct or indirect arising from your purchase,
use or non use of the Appliance.
10. For Appliances and services provided by Electrolux in Australia,
the Appliances come with a guarantee by Electrolux that cannot be
excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and for compensation for any
other reasonably foreseeable loss or damage. You are also entitled to
have the Appliance repaired or replaced if the Appliance fails to be of
acceptable quality and the failure does not amount to a major failure.
The benefits to you given by this warranty are in addition to your other
rights and remedies under a law in relation to the Appliances or services
to which the warranty relates.
11. At all times during the Warranty Period, Electrolux shall, at its discretion,
determine whether repair, replacement or refund will apply if an Appliance
has a valid warranty claim applicable to it.
12. For Appliances and services provided by Electrolux in New Zealand, the
Appliances come with a guarantee by Electrolux pursuant to the provisions
of the Consumer Guarantees Act, the Sale of Goods Act and the Fair
Trading Act.
13. To enquire about claiming under this warranty, please follow these steps:
(a) carefully check the operating instructions, user manual and the terms
of this warranty;
(b) have the model and serial number of the Appliance available;
(c) have the proof of purchase (eg an invoice) available;
(a) travel of an authorised representative;
(d) telephone the numbers shown below.
(b) transportation and delivery of the Appliance to and from
Electrolux or its ASC,
In all instances, unless the Appliance is transported by Electrolux or an
Electrolux authorised representative, the Appliance is transported at the
owner’s cost and risk while in transit to and from Electrolux or its ASC.
14. You accept that if you make a warranty claim, Electrolux and its ASC may
exchange information in relation to you to enable Electrolux to meet its
obligations under this warranty.
Important Notice
Before calling for service, please ensure that the steps listed in point 13 above have been followed.
FOR SERVICE
or to find the address of your nearest
state service centre in Australia
PLEASE CALL 13 13 49
For the cost of a local call (Australia only)
FOR SERVICE
or to find the address of your nearest
authorised service centre in New Zealand
FREE CALL 0800 10 66 10
(New Zealand only)
GRH_Warr_Apr11
SERVICE AUSTRALIA
ELECTROLUX HOME PRODUCTS
www.electrolux.com.au
SERVICE NEW ZEALAND
ELECTROLUX HOME PRODUCTS
www.electrolux.co.nz
FOR SPARE PARTS
or to find the address of your nearest
state spare parts centre in Australia
PLEASE CALL 13 13 50
For the cost of a local call (Australia only)
FOR SPARE PARTS
or to find the address of your nearest
state spare parts centre in New Zealand
FREE CALL 0800 10 66 20
(New Zealand only)
15
For more information on all Westinghouse appliances,
or for dimension and installation information, call into your retailer,
phone or email our customer care team or visit our website:
AUSTRALIA
phone: 1300 363 640
fax:
1800 350 067
email: [email protected]
web:
www.westinghouse.com.au
NEW ZEALAND
phone: 09 573 2384
fax:
0800 363 600
email: [email protected]
web:
www.westinghouse.co.nz
TOP SERVICE
Top Service encompasses the after sales service
provided by The Electrolux Group to consumers
including delivery, home service and spare parts.
Westinghouse. We are part of the Electrolux family.
Share more of our thinking at www.electrolux.com
Part number: 0342 001 599 Issue A
© 2012 Electrolux Home Products Pty Ltd
ABN 51 004 762 341
Print code: WRC613S_WRC913S_CHOct12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement