Electrolux EKG101199X User Manual

Electrolux EKG101199X User Manual
Instructions booklet
mod. EKG 101199 X
GB
GENERAL INFORMATION
RECOMENDATIONS AND PRECAUTIONS
ATTENTION:
The use of a gas cooking appliance results in the
production of heat and moisture in the room in
which it is installed. Ensure that the kitchen is well
ventilated:
keep natural ventilation holes open or install a
mechanical ventilation device (mechanical extractor
hood).
Prolonged intensive use of the appliance may call
for additional ventilation, for example opening of a
window, or more effective ventilation, for example
increasing the level of mechanical ventilation where
present.
Prior to installation, ensure that the local distribution
conditions (nature of the gas and gas pressure)
and the adjustment of the appliance are compatible.
- Before using the appliance, remember to remove
the protective plastic film present on some parts
of the appliance (facia-panel, parts in stainless
steel, etc.)
- Do not use the appliance for the purpose of
heating.
- When the appliance is not in use, we recommend
you unplug it from the mains electricity and
shut the gas tap.
SAFEGUARDING THE ENVIRONMENT
Packaging disposal
Sort packaging into different materials
(cardboard, polystyrene etc.) and dispose of
them in accordance with local waste disposal
laws.
- This appliance must be installed in
accordance with the regulations in force and
must only be used in well ventilated rooms.
Consult the instructions booklet before installing
and using the appliance.
- This household appliance has been designed for
cooking and it must therefore be used for this
purpose only.
DEAR CUSTOMER,
• Carefully read these instructions before using
the appliance and keep them for future
consultation.
• Keep potentially hazardous packaging
(plastic bags, polystyrene etc.) out of the reach
of children.
IN THE EVENT OF FIRE:
• In the event of fire, immediately shut the main
valve of the gas supply, unplug the appliance
from the mains. Never,
under any
circumstances, pour water on burning oil.
• Do not store flammable products or aerosol
containers near the burners, and do not vaporize
them near lighted burners.
WARRANTY
Your new appliance is covered by a warranty.
The warranty certificate is herewith enclosed. If it
is missing, ask the retailer for it, indicating date of
purchase, model, and data plate number which are
printed on the data plate identifying the appliance
(fig. 8B ).
Keep the part intended for the user, and show it
upon request to the After-sales Service, along with
proof of purchase.
If you fail to do so, the after-sales service will be
obliged to charge you in full for any repair work
carried out.
Original spare parts should be purchased only from
our After-sales Service and Spare Parts Authorised
Centres.
*
FOR YOUR SAFETY AND THAT OF YOUR
CHILDREN.
• Do not store items that are attractive to children
above or near the appliance.
• Keep children well away from the appliance: bear
in mind that some parts of the appliance and the
pans become dangerously hot during use, and
that they take a while to cool down.
• In order to avoid any unintentional accidents, pan
handles should be turned inwards to the rear of
the cooker, not outwards into the room or over
adjacent burners.
• When cooking, do not use clothes with large flared
sleeves; in case of accidental contact with a lit
burner.
AFTER-SALES SERVICE
Before leaving the factory, this appliance has been
tested and set up by skilled personal, in order to
ensure optimum performance.
Any repair or intervention subsequently required
must be carried out with the utmost care and
attention.
For this reason, we recommend you always contact
the Sales Centre or your nearest After-sales Service.
Always specify the nature of the problem and the
appliance model.
2
GB
The appliance must not be used by people
(including children) with limited physical,
sensory or mental abilities, or without
experience or expertise, unless they have
received instructions for using it from those
responsible for their safety.
Young children should be supervised to ensure
they not play with the appliance.
WARNING - OVEN:
When the oven or the grill are in use, accessible
parts can become very hot; it is necessary to
keep children well away from the appliance.
- Never cook food on the base of the oven.
- Keep fingers away from the area of the hinges
when closing the door as it is possible to trap
them.
- Do not let children sit down on or play with the
oven door. Do not use the drop down door as a
stool to reach cabinets above.
LOWER DRAWER
DO not place inflammable materials or plastic
utensils in the warming drawer (situated below the
ovens).
Control panel
6 Control knob ( left rapid burner )
7 Control knob ( left semi rapid burner )
8 Control knob ( Triple crown burner )
9 Control knob ( right semi rapid burner )
10 Control knob ( auxiliary burner )
1 Oven light
2 Turnspit
3 Control knob for grill function
4 Control knob for oven thermostat
5 Control knob for minuter minder
1
2
3
4
5
6
3
7
8
9
10
GB
COOK-TOP USE
USING THE GAS BURNERS
The following symbols are found on the control
panel next to each knob:
- Circle
gas off
- Large flame
maximum setting
- Small flame
minimum setting
ENERGY SAVING TIPS
• The diameter of the pan bottom should be the
same as that of the burner. The burner flame
must never exceed the pan’s diameter.
• Use flat-bottomed pans only.
• Whenever possible, keep a lid on the pan while
cooking.
This allows you cook using less heat.
• Cook vegetables, potatoes, etc. with as little
water as possible to reduce cooking times.
The minimum position is at the end of the anticlockwise rotation of the knob. Knob positions must
be set between max. and min.; never set the knobs
between max. and off.
MANUAL IGNITION
(during mains power failure)
To ignite the burner, press the knob of the selected
burner and turn it anticlockwise to the maximum
position then light with a match.
AUTOMATIC ELECTRIC IGNITION
To ignite the burner, press the knob of the selected
burner and turn it anticlockwise to the maximum
position. Keeping the knob pressed in, the automatic
ignition of the burner will operate.
In case of power failure, the burner can also be lit
using a match.
BURNERS
RAPID
SEMIRAPID
AUXILIARY
TRIPLE CROWN
APPLIANCES WITH SAFETY VALVE
Follow the same procedure described above to
ignite the burners.
In this case, however, once you have turned the
knob to the open setting, hold it pressed in for 10
seconds.
If for any reason the burner flame goes out, the
safety valve automatically shuts off the gas supply
to the burner in question.
4
PANS
Ø min.
Ø max
180 mm
220 mm
120 mm
200 mm
80 mm
160 mm
220 mm
260 mm
GB
USING OF THE GAS OVEN
Before the first use of the oven
AUTOMATIC ELECTRIC IGNITION
The oven door must always be completely open,
before the burner ignition
To ignite the burner, press the knob and turn it anticlockwise to the maximum position (fig. 2).
Keeping the knob pressed in, the automatic ignition
of the burner will operate.
In case of power failure, the burner can also be lit
using a match. (fig. 1).
The first time the oven is used, it may give off
smells, these are caused by residues left by the
production processes and is quite normal. Ensure
there is adequate ventilation in the room before
performing this action. (It is necessary to heat
up the oven at the maximum temperature for
about 30-40 minutes in order to burn off these
residues). It is perfectly normal for the oven to
smoke when first used; wait for the smoke to stop
before placing food into the oven.
WARNING: Do not operate the ignition for more
than 15 seconds. If the burner fails to ignite,
leave the oven door open for at least 1 minute
before pressing the knob again.
The oven is fitted with: a grill shelf for cooking food
in oven dishes or for placing directly on the grill
shelf itself, a drip-tray for cooking sweets, biscuits,
pizzas, etc., or for collecting juices and fats from
food cooked directly on the grill shelf.
APPLIANCES WITH SAFETY VALVE
Follow the same procedure described above to
ignite the burners.
In this case, however, once you have turned the
knob to the open setting, hold it pressed in for 10
seconds.
If for any reason the burner flame goes out, the
safety valve automatically shuts off the gas supply
to the burner.
ATTENTION:
- always use the oven with the oven door closed
- do not cook foods on the bottom in the base
of the oven.
MANUAL IGNITION
(during mains power failure)
To ignite the oven burner, simply insert a match
through the opening (fig. 1) and then turn the knob
to the maximum setting as shown in figure 2.
Fig. 1
Fig. 2
170
21
0
250
0
14
5
GB
USING OF THE GAS GRILL
Automatic electric ignition.
The oven door must always be completely open,
before the burner ignition.
To ignite the burner, press the knob and turn it to
the max. position (see fig. 3). Keeping the knob
pressed in, the automatic ignition of the burner will
operate.
In case of power failure, the burner can also be lit
using a match. (fig. 4).
Manual ignition of the grill
(during mains power failure)
Open the oven door and turn the grill knob to max.
position (fig. 3).
Bring a light match near the holes of the burner
placed on the oven upper part (fig.4).
Fig. 3
WARNING: Do not operate the ignition for more
than 15 seconds. If the burner fails to ignite,
leave the oven door open for at least 1 minute
before pressing the knob again.
APPLIANCES WITH SAFETY VALVE
Follow the same procedure described above to
ignite the burners.
In this case, however, once you have turned the
knob to the open setting, hold it pressed in for 10
seconds.
If for any reason the burner flame goes out, the
safety valve automatically shuts off the gas supply
to the burner.
Fig. 4
NOTE: some grill cooking must be carried out
with oven burner on.
6
GB
Note: The following tables provide a guide for cooking some of the most popular dishes. The
cooking times recommended in these tables are approximate. After a few attemps, we are sure
that you will be able to adjust the times to get the results you want.
Cooking table
Gas oven
Shelf
position
Gas grill
Shelf
position
*Do not use
Shelf positions
7
GB
TURNSPIT
For utilization of the turnspit follow the instructions
described .
- Put the food in spit L (see fig. 7), paying attention
to block it within the two forks F and to balance
it, in order to avoid any unnecessary effort in
motor R.
- Put the spit on support G, after having put its
opposite end into hole P of motor R.
- Place the drip-tray with a little water under the
spit.
- To remote the spit, operate in the opposite direction
using protecting glove in isolating wool (fig. 5).
R
CARE AND MAINTENANCE
Before cleaning the appliance, turn off the mains
gas tap and unplug the appliance or disconnect
power at the main circuit breaker of the electrical
system.
Do not clean appliance surfaces when still hot.
Do not use steam cleaners to clean the oven.
ENAMELLED SURFACES
Clean with a damp sponge using soap and water.
Grease can be easily removed using hot water or
a specific cleansing agent for enamelled surfaces.
Do not use abrasive cleansers.
Do not leave any acid or alkaline substances (lemon
juice, vinegar, salt, etc.) on the enamel.
Clean the parts in stainless steel with specific
cleansers for stainless steel surfaces.
These detergents must be applied using a soft
cloth.
Fig. 5
P
F
L
GRIDS AND BURNERS
To clean the cooktop burners, remove by pulling
upwards and soak them for approximately 10
minutes in hot water with a little detergent. After
cleaning and washing them, dry them carefully.
Make sure that burner holes are not clogged.
Clean the burners once a week or more frequently
if necessary.
MAKE SURE YOU HAVE ASSEMBLED THE
BURNERS CORRECTLY.
G
MINUTES COUNTERS (Fig. 6)
Turn the knob clockwise to set the desired cooking
time. The minutes minder can be adjusted from 1
to 60 minutes.
A sound signal will inform you that the chosen time
is up.
OVEN
Clean enamelled parts with a damp sponge using
soap and water. Grease can be easily removed
using hot water or a specific cleansing agent for
enamelled surfaces.
Do not use abrasive cleansers.
Install shelves by locating them in the horizontal
guide rails on the oven walls.
Fig. 6
55
40
20
45
15
50
10
5
35
The interior glass of the oven
The interior glass of the oven door can be removed:
with the door in a semi-open position, remove the
screws A and B and the profime C as shown in
fig. 6B.
Use both hands to remove the glass as shown in
figures 6C.
After cleaning, refit the glass by proceeding in
reverse order.
8
30
25
GB
INSTRUCTIONS FOR THE USER
B
OVERALL DIMENSIONS
900
600
C
960
A
Fig. 6B
1000
WARNINGS
Do not use the oven door handle to move the
appliance, for example to remove it from the
packaging.
The appliance is in class 1 or class 2 subclass 1.
IMPORTANT:
Any adjacent furniture must be able to withstand
high temperatures (min. 90°C).
If the appliance is to be installed near units, leave
the minimum gaps specified in figure 7.
The cooker must not be placed on a pedestal.
CAUTION:
Do not use rough or abrasive materials or sharp
metal scrapers to clean the glass doors of the
oven since they may scratch the surface and
cause the glass to break.
mín.100 mm
mín. 20mm
mín. 50 mm
mín. 650 mm
mín. 50 mm
mín. 20mm
mín. 400 mm
Fig. 6C
Fig. 7
The cooker is fitted with 4 legs for an eventual
alignment in height with the furniture (fig. 8).
REG. MAX
15mm
Fig. 8
9
GB
ROOMS VENTILATION
GAS APPLIANCES
This appliance is not connected to a device to vent
the combustion products. It must therefore be
installed and connected in conformity with the
installation standards in force.
Particular attention must be paid to the standards
on ventilation of the room.
min. 180 cm.
min. 180 cm.
electrical fan
min. 100cm2.
VENTILATION OF ROOMS
Remember that this appliance can be installed and
work in well-ventilated rooms only, according to the
standards in force, such as to allow, with openings
on the external walls or with special ducts, a correct
natural or forced ventilation ensuring permanently
and sufficiently both the entry of the air needed
for correct combustion and the removal of spent
air.
In particular when there is only this gas appliance
in the room, there must be a hood over the appliance
to ensure the natural and direct removal of spent
air, with a vertical straight duct of length equal to
at least twice the diameter and a minimum section
of at least 100 cm2.
For the indispensable entry of fresh air into the
room there must be a similar 100 cm2 opening
directly to the outside, situated at a height near
floor level so that it is not blocked either inside or
outside the wall and so as not to cause disturbances
to correct burners combustion and to the regular
removal of spent air and with a difference of height
with respect to the outlet opening of at least 180
cm.
Remember that the quantity of air necessary for
combustion must never be less than 2m3/h for each
kW of power (see total power in kW on the appliance
data plate fig. 8B ).
In all other cases, i.e. when there are other gas
appliances in the same room, or when natural direct
ventilation is not possible and natural indirect or
forced ventilation must be installed, contact a
qualified specialist who will install and make the
ventilation system, scrupulously observing the
regulations contained in the standards in force.
The openings must be so positioned that there are
no draughts of air which cannot be tolerated by the
occupants.
Moreover to eliminate combustion products, it is
forbidden to use flues already used by other
appliances.
min.
min. 100cm
100cm22..
Fig. 8 B
*
10
GB
GAS CONNECTING
We recommend to check wether the appliance has
been foreseen for the kind of gas distributed.
The appliance must be connected to the gas piping
in a workmanlike way and in conformity with the
regulations in force which lay down the installation
of a safety valve at the end of the piping.
For butane and propane a pressure reducer
conforming to the standards in force may perform
this task. The seal gaskets must be in accordance
with rules.
The cookers can be set for supply both on the right
or lefthand side (fig 10). In this case it is sufficient
to reverse the position of the cad nipple reducer.
At the end make sure than there is no leakage of
gas.
Warning: do not use flames to check any gas
leakages.
Fig. 10
The appliance must be connected with the gas
pipeline by means a rubber tube in accordance
with rules.
This tube must be connected directly on the push
on connector and it must be blocked with a band
(see A Fig. 9).
In the last case, check the tube's printed date of
expiry and replace it before this date.
Once the gas appliance has been connected, check
the connection seal by means of soapy water.
Warning: do not use flames to check any gas
leakages.
Stop
Inlet
If the connecting tube must be passed behind the
appliance, observe the regulations of the picture
11.
A
Fig. 9
WARNINGS
Concerning rubber flexible tubes, we remember
you:
1 - to avoid the tube to be narrowed or crushed
2 - do not submit it to traction or torsion efforts
3 - to avoid contact with sharp edges, etc...
4 - to avoid contact with parts reaching
temperatures over 70°C the ambient
temperature
5 - to ensure that they can be checked for all their
length.
Fig. 11
11
GB
APPLIANCE MAINTENANCE
To change the oven injector, it is necessary to
act as follows: open the oven door, remove the
lower side of the oven (see fig. C), unscrew screw
C and disassemble the oven burner (see fig. D).
Change the injector (see fig. E).
Re-assemble everything in the opposite direction,
paying attention to place the burner in the right way
on its rear slot.
REPLACEMENT OF INJECTORS
Always isolate the cooker from the electricity supply,
shut off the gas supply temporarily and proceed as
follows:
- remove the grids
- remove burners and flame-spreaders
(see fig. 13).
- change the injector (see fig. 14).
Re-assemble everything in reverse order, ensuring
you position the flame-spreader correctly.
Fig. 13
C
C
FIG.C
C = Injector triple crown
Fig. 14
C
FIG.D
FIG.E
12
GB
To change the grill injector, it is necessary to act
as follows: open the oven door, unscrew screw C
(see fig.F) and disassemble the grill burner (see
fig. F1). Change the injector (see fig.G).
Re-assemble everything in the opposite direction,
paying attention to place the burner in the right way
on its rear slot.
GENERAL INJECTORS TABLE
Kind of gas mbar Nozzle Burners
Power KW
N°
max.
BUTANE 28-30
G 30
PROPANE 37
G 31
87
66
50
96
100
66
Rapid
Semi rapid
Auxiliary
Triple crown
Oven
Grill
3,00
1,75
1,00
3,80
4,30
2,00
OVEN LAMP
Warnings
Isolate the cooker from the electricity supply before
attempting to replace the oven lamp.
The oven lamp is of a special type designed to
withstand high temperatures. To replace it, proceed
as follows: remove the protective glass (A) and
replace the burnt-out bulb with one of the same
type (fig. 15).
Re-fit the protective glass.
C
FIG.F
E 14
25 W - 230 V~
T300°C
A
Fig. 15
FIG. F1
FIG. G
13
GB
ELECTRICAL CONNECTION
CONNECTION TO THE MAINS SUPPLY THE
APPLIANCE MUST BE CONNECTED IN
ACCORDANCE WITH THE RULES IN FORCE,
AND ONLY BY AN AUTHORIZED ELECTRICAL
INSTALLER.
WARNING:THIS APPLIANCE MUST BE
EARTHED
Check that the power rating of the mains supply
and of the sockets are suitable for the maximum
power of the appliance as indicated on the
specification plate. If the appliance does not come
already fitted with a plug, fit a regulation plug to the
cable which is capable of taking the power indicated
on the specification plate (fig. 8 B ).
The earth wire is yellow/green. If the plug fitted
to the appliance, and the socket, are incompatible,
get a profesionnally qualified person to fit the correct
type of plug. If an appliance is not equipped with
supply cable and plug, the power supply must be
fitted with a disconnect switch in which the distance
between contacts permits total disconnection in
accordance with overvoltage category III, as required
by installation regulations.
The yellow/green earth wire should not be
controlled by the switch.
The plug used for mains supply connection should
be easy to get at, once the appliance is in position.
Important: position the mains supply cable so that
it is never subjected to a temperature which is more
than 50°C above ambient temperature.
The electrical safety of the appliance can only be
guaranteed when it has been correctly connected
to an efficient earthed power supply, as laid down
in the regulations for electrical safety.
Important: the manufacturer cannot be held
responsible for any damage to persons or objects
due to the lack of an earth connection.
REPLACEMENT OF THE CABLE (fig. 16).
ALWAYS UNPLUG THE PLUG FROM THE
CURRENT SOCKET OR SWITCH OFF THE
CURRENT ON THE POWER SUPPLY LINE BY
MEANS OF THE MAINS CIRCUIT SWITCH,
BEFORE CARRYING OUT ANY MAINTENANCE
ON THE OVEN.
If the cable is damaged, fit a replacement in the
following way:
- remove the mains cable and replace it with one
of the same length which is rubber insulated and
suitable for the power rating of the appliance.
The “yellow/green” earth wire, which must be
connected to terminal
, has to be about 10 mm
longer than the other wires; the “blue” neutral wire
has to be connected to the terminal marked with
letter N. The live wire must be connected to the
terminal marked with letter “L”.
*
TYPE AND SECTION OF SUPPLY CABLE
Applance type
Alimentation monophasée 220-240 V~
Type of cable
section
All gas + elect. oven Rubber H05 RR-F
3 x 0,75 mm2
Rubber H05 RN-F
L
1
2
3
4
N
5
Fig. 16
14
GB
NEVER
Never allow children near the cooker when in use
as all surfaces will become hot during and after
cooking.
Never allow anyone to sit or stand on any part of
the cooker.
Never heat up unopened food containers as
pressure can build up causing the container to
burst.
Never store chemicals, food stuffs, pressurised
containers in or on the cooker, or in cabinets
immediately above or next to the cooker.
Never fill a deep fat frying pan more than1/3 full of
fat or oil and never use a lid with this type of pan.
NEVER LEAVE PANS UNATTENDED WHILE
COOKING.
Never place flammable or plastic items on or near
the hob burners.
Never use proprietary spillage collectors on the
hob burners.
Never use the cooker for the purpose of heating.
Never dry clothes or place other items over or near
to the hob burners or oven doors.
Never wear garments with long wide sleeves whilst
cooking.
Never place flammable materials in the oven or the
compartment below the oven.
Never allow fat or oil to build up in the oven trays,
grill pan or oven base.
Never place cooking utensils or plates on the oven
base.
Never grill food containing fat without using the grill
rack.
Never cover the grill rack with aluminium foil.
Never place hot enamel parts in water, leave them
to cool first.
Never allow vinegar, coffee, milk, saltwater, lemon
or tomato juice to remain in contact with enamel
parts (inside the oven and oven trays).
Never use abrasive cleaners or powders since
these could scratch the surface of the stainless
steel and the enamel.
For your safety
The product should only be used for its prescribed
purpose, namely for domestic cooking of foodstuffs.
Under no circumstances should any external covers
be removed for servicing or maintenance except
by suitably qualified personnel.
ALWAYS
Always make sure you understand the controls
before using the cooker.
Always check that all controls on the cooker are
turned off after use.
Always stand back when opening an oven door to
allow heat to disperse.
Always use dry, good quality oven gloves when
removing items from the oven.
Always take care when removing items from the
oven, as they may be dangerously hot.
Always keep the oven doors closed when the
cooker is not in use.
Always place pans centrally over the burners and
position them so that the handles cannot accidentally
be caught or knocked or become heated by other
burners.
Always keep the cooker clean, as a build up of
grease or fat from cooking can cause a fire.
Always allow the cooker to cool before cleaning.
Always follow the basic principles of food handling
and hygiene to prevent proliferation of bacteria.
Always keep ventilation grilles free from
obstructions.
Always turn off the electricity before cleaning or
replacing an oven lamp.
15
A
L
1
2
3
4
N
5
H05 RR-F
H05 RN-F
10
C
FIG.F
C
FIG. F1
C
=C
FIG. G
FIG.C
9
A
8
1000
*C
min. 100cm2.
C
REG. MAX
15mm
7
900
960
600
R
P
F
L
G
B
C
55
40
20
45
15
50
10
5
30
25
6
35
A
5
170
21
0
250
4
0
14
6
7
8
9
10
1 2
Ø
3
4
5
Ø
3
6
7
8
9
*C
2
Tip. Montagnani - Italy - Cod.
538515 0310
-
MADE IN ITALY
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement