Privileg PRBE 363W A+++ Instruction for Use

Add to my manuals
4 Pages

advertisement

Privileg PRBE 363W A+++ Instruction for Use | Manualzz
PRODUCT SHEET
GB
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the
operation automatically.
After starting the appliance, wait at least 4-6 hours before
placing food into the appliance.
When the appliance is connected to the power supply, the
display lights up and all the icons appear on the display for
approximately 1 second.
The default (factory) values of the freezer compartment
and refrigerator compartment settings light-up.
FAN
The fan improves temperature distribution inside the
refrigerator compartment, allowing better preservation of
stored food.
By default, the fan is switched on. It is advisable to keep
the fan switched on when the ambient air temperature is
above 27 ÷ 28°C or if you notice drops of water on the
glass shelves or in sever humidity conditions.
Please note that when the fan is switched on it will not
continuously work. The fan will start/stop working
depending on the temperature and/or humidity level
inside the fridge. It is therefore absolutely normal if the
fan does not move even if the fan is switched on.
The fan automatically stops working when the fridge door
is open.
1. Control panel
Refrigerator Compartment
2. Refrigerator compartment light ( LED system)
3. Fan
3a. ON/OFF fan button
3b. cover of fan
4. Shelves / Shelf area
5. Bottle rack
6. Multi-flow cold air system
7. Cooler compartment (best for meat and fish) *
8. Rating plate with commercial name
9. Fruits and vegetables crisper
10. Doors reversibility kit
11. Door trays
12. Bottle holder *
13. Egg tray
14. Door seals
Note:
Do not obstruct the air intake area with food items.
To guarantee the right performance at lower ambient
temperature (colder than 18°C) and to minimize Energy
Consumption, turn off the fan.
To turn off the fan press the button (3a).
Freezer Compartment
14. Door seals
15. Upper basket for freezing fresh food or to store
frozen food
16. Storage baskets for frozen food items
If the appliance has the fan it can be equipped with the
antibacterial filter.
Remove it from the box found in the crisper drawer (item
9) and insert into the cover of fan (3b).
The replacement procedure is included in the filter box.
Anti-bacterial protection:
- Antibacterial filter* in the fan (3)
- Antibacterial additives* in the material of Crisper (9)
- Door seals are made of material able to inhibit bacterial
growth (14)
* Available on selected models
CONTROL PANEL
Notes:
- All shelves and door trays are removable.
- The internal temperatures of the appliance may be
affected by the ambient temperature, frequency of door
opening, as well as location of the appliance.
Temperature setting should take into consideration these
factors.
- The appliance accessories are not dishwasher safe.
- After inserting food, ensure that compartments doors
closes properly, especially the freezer door.
A.
B.
C.
D.
E.
F.
G.
H.
TO INCREASE STORAGE
The freezer compartment can be used without the
baskets to increase storage and for large products.
You can place the food products directly on the racks.
D
GB
F
NL
E
P
I
Fridge temperature LEDs
On/Stand-by icon/button
Freezer temperature LEDs
Fridge temperature / Fast Cool button
Black Out icon
Reset button / Alarm icon
Key Lock button
Freezer temperature / Fast Freeze button
GR
S
N
DK
FIN
CA
PRODUCT SHEET
FUNCTIONS
Smart Display
This energy saving feature allows to reduce power
consumption by automatically turning off the display
when not in use. To activate the Smart Display, press
Fridge °C and Freezer °C buttons at the same
time for 3 seconds until the acoustic signal sounds.
After the Smart Display activation, the display goes off
(except the alarms, if any). To adjust temperature or
use other functions, it is necessary to activate the
display by pressing any button. After about 15
seconds without any action, the display will go off
again. To deactivate the function, press Fridge °C
and Freezer °C buttons at the same time for 3
seconds until the acoustic signal sounds. The display
will come back to the normal visualization. Smart
Display function is automatically disabled after Blackout.
It is important to remember that this function does
not disconnect the appliance from the power supply.
On/Stand-by
This function turns On/Stand-by both the refrigerator
and freezer compartments.
To put the product in Stand-by, press & hold the
On/Stand-by button for 3 seconds. All the icons turn
off except
On/Stand-by icon back light to indicate
that the appliance is in Stand-by.
When the appliance is in Stand-by, the light inside the
refrigerator compartment does not work.
Remember that this operation does not disconnect
the appliance from the power supply.
To switch the appliance on again, simply press the
On/Stand-By button.
Fridge Temperature
To adjust the Fridge Temperature, press the Fridge
°C button. The Fridge Temperature can be adjusted
between +2°C and + 8°C, as shown by the Fridge
Temperature LEDs.
Note: The declared appliance energy consumption
refers to operation with the Smart Display function
activated.
Freezer Temperature
To adjust the Freezer Temperature inside, press the
Freezer °C button. The Freezer Temperature can
be adjusted between -16°C and -24°C, as shown by
the Freezer Temperature LEDs.
Key Lock
This function prevents anyone from inadvertently
changing settings or switching off the appliance. To
lock the keys, press
Reset button for 3 seconds
until the display shows the
Key Lock icon: an
acoustic signal confirms the function has been
selected. To unlock the keys, follow the same
procedure until the
Key Lock icon switches off.
Fast Cool
Using Fast Cool function it is possible to
increase the cooling in the refrigerator
compartment. The use of this function is
recommended when placing a very high
quantity of food in the refrigerator
compartment.
Press & hold for 3 sec. the Fridge °C
button to activate Fast Cool function.
When activated, the Fast Cool indication
will be displayed by the Fridge
Temperature LEDs as shown in the
beside sequence.
The function is automatically disabled after 6 hours, or
can be manually disabled by pressing Fridge °C
button.
Door Open Alarm
The
Alarm icon lights up blinking and the acoustic
alarm sounds. The alarm is activated when the
refrigerator's door is left open for more than 2
minutes. Close the door to disengage the alarm, or
press once
Reset button to mute the acoustic
alarm for 2 minutes.
If the door is not closed, the acoustic alarm will sound
again after two minutes. To disengage the door alarms
close the door.
Fast Freeze
The use of this function is
recommended when placing a very high
quantity of food to be frozen in the
freezer compartment. 24 hours before
freezing fresh food, press & hold for 3
sec. the Freezer button to activate
the Fast Freeze function. When
activated, the Fast Freeze indication will
be displayed by the Freezer
Temperature LEDs as shown in the
beside sequence. After 24 hours place
the food to be frozen in the upper
basket of freezer compartment.
The function is automatically disabled after 48 hours,
or can be manually disabled by pressing Freezer °C
button.
D
GB
F
NL
E
P
GB
Over Temperature Alarm
The acoustic alarm sounds and all the 5 Freezer
Temperature LEDs blinks. The alarm is activated
when:
• The appliance is connected to the power supply
after prolonged disuse
• The freezer compartment temperature is too high
• The quantity of foods loaded into the freezer
exceeds that indicated on the data plate
• The freezer door has been left open for a long time
To mute the alarm buzzer press
Reset button just
once. The
Alarm Icon is automatically turned-off
as soon as the freezer compartment reaches a
temperature below -10°C and the Freezer
Temperature LEDs stop blinking and shows the
chosen setting.
I
GR
S
N
DK
FIN
CA
PRODUCT SHEET
GB
MALFUNCTION AND ALARM INDICATIONS:
Operation Alarms
In the event of operation alarms, they will also be displayed in the Fridge Temperature LEDs, (e.g. Failure1, Failure 2,
etc...) call After-sales Service and specify the alarm code.
The acoustic alarm sounds, the
Alarm icon lights up and the 3 central LEDs in the Fridge Temperature LEDs blinks
according to failure code described below:
Failure code
Legend:
Visualization
Error 2
RC Set points blink on/off at 0,5 sec. Blinks ON
2 times then remain off for 5 seconds. Pattern repeats.
x2
Error 3
RC Set points blink on/off at 0,5 sec. Blinks ON
3 times then remain off for 5 seconds. Pattern repeats.
x3
Error 6
RC Set points blink on/off at 0,5 sec. Blinks ON
6 times then remain off for 5 seconds. Pattern repeats.
x6
Led off
Led flashing
Do not use abrasive detergents or tools.
To ensure continuous and correct flow of defrost water,
regularly clean the inside of the draining hole on the back
of the refrigerator near the fruit and vegetable drawer,
using the tool provided.
Black Out Alarm
After a power blackout, your product is designed to
automatically monitor the temperature in the freezer
when electricity is resupplied. If the temperature in
the freezer rises above freezing level, the
Black
Out icon lit, & the
Alarm Icon blinks and the
acoustical alarm sounds when electricity is resupplied. To reset the alarm press the
Reset
button just once.
In case of Black Out Alarm, the following actions are
recommended:
• If the food in the freezer is unfrozen but still cold,
all the food in the freezer should be moved to the
fridge compartment and eaten within the next 24
hours.
• If the food in the freezer is frozen, this indicates the
food was thawed and then refrozen when
electricity was re-supplied which degrades taste,
quality and nutritional value and also could be
unsafe. It is recommended to not consume the food
but to dispose of the entire content of the freezer.
The Black Out Alarm is designed to provide guidance on
food quality in the freezer in the event of electricity black
out. This system does not guarantee food quality or safety
and consumers are advised to use their own judgment in
evaluating food quality in freezer and refrigerator
compartments.
NO FROST REFRIGERATOR COMPARTMENT
Refrigerator compartment defrosting is completely
automatic.
Droplets of water on the rear wall inside the refrigerator
compartment indicate that the automatic defrost phase is
in progress. The defrost water is automatically run into a
drain hole and collected in a container, where it
evaporates.
DEFROSTING THE FREEZER
COMPARTMENT
The freezer should be defrosted
once or twice a year or when
excessive frost is present (3 mm
thickness).
The formation of frost is normal.
The amount and rate at which frost
accumulates depends on room
conditions and how often the door is open.
To defrost the unit, switch off the whole appliance and
remove all food products.
Leave the freezer door open to allow the frost to melt.
Pull out the defrost water drain and place a container
under the drain (see figure).
CLEANING
Important: Before carrying out any cleaning or
maintenance operation, unplug the appliance or
disconnect it from the power supply.
Regularly clean the appliance using a cloth and a solution
of warm water, with some soft detergent suitable for
cleaning the inside of the refrigerator compartment.
D
GB
F
NL
E
P
I
GR
S
N
DK
FIN
CA
PRODUCT SHEET
GB
When the operation is completed, put back the defrost
water drain.
Clean the inside of the freezer. Rinse and dry thoroughly.
Switch the whole appliance, back on and store the food
inside.
LED LIGHT SYSTEM
The light system inside the
refrigerator compartment uses LEDs
light, allowing a better lightning as
well as a very low energy
consumption.
If the LED light system does not
work, please contact the Service to
replace it.
5019 620 00017
Printed in Poland 01/13
Important:
The refrigerator compartment light switches on when the
refrigerator door is opened. If the door is kept open for
more then 10 minutes the light will be automatically
switched off.
D
GB
F
NL
E
P
I
GR
S
N
DK
FIN
CA

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement