Bauknecht KRIF 3183 A++ Instruction for Use

Add to my manuals
17 Pages

advertisement

Bauknecht KRIF 3183 A++ Instruction for Use | Manualzz
Gebrauchsanweisung
Instructions for use
Mode d’emploi
Gebruiksaanwijzing
Istruzioni per l’uso
Brugsanvisning
Bruksanvisning
Käyttöohje
Manual de utilização
Instrucciones para el uso
Instrukcje użytkowania
Használati utasítás
ИнструкциЯ за употреба
Návod k použití
Návod na použitie
Instrucţiuni de utilizare
Инструкции по эксплуатации
DEUTSCH
ENGLISH
FRANÇAIS
NEDERLANDS
ESPAÑOL
PORTUGUÊS
ITALIANO
ΕΛΛΑΣ
SVENSKA
NORSK
DANSK
SUOMI
Gebrauchsanweisung
Instructions for use
Mode d’emploi
Gebruiksaanwijzing
Instrucciones para el uso
Manual de utilização
Istruzioni per l’uso
Οδηγίες χρήσης
Bruksanvisning
Bruksanvisning
Brugsanvisning
Käyttöohje
Seite 4
Page 13
Page 23
Pagina 32
Página 41
Página 50
Pagina 59
Σελίδα 68
Sidan 77
Side 86
Side 95
Sivu 104
HOW TO OPERATE THE REFRIGERATOR
COMPARTMENT
Starting up the appliance
1. Plug in the appliance
2. When the appliance is plugged in, it is
normally factory set to a temperature of 5°C.
3. If the led “L” is “ON” press button “B”.
Adjusting the temperature
For temperature adjustment, see the enclosed
product sheet.
Note:
Ambient air temperature, the frequency of
door opening, the introduction of hot food and
unsuitable appliance positioning can all affect
the internal temperature of the refrigerator,
which may differ from that shown on the
display
How to use the refrigerator compartment:
Position the food as shown in the figure.
A Cooked food
B Vegetables
C Fish, meat
D Fruit and vegetables
E Bottles
F Cheese
Note:
• Cover food to prevent it drying out
• The space between the shelves and the
rear wall of the refrigerator compartment
must be unobstructed to allow circulation of
air
• Do not place food in direct contact with the
rear wall of the refrigerator compartment.
• Do not place hot food in the refrigerator
• Store liquids in closed containers
Important:
Storing vegetables with a high water
content can cause condensation to form
on the glass shelves; this will not affect the
correct operation of the appliance.
13
E
L
A
G
I
D
B
C
F
H
HOW TO USE THE MEAT AND FISH BOX
(if present)
The appliance is equipped with a separate box
for optimum storage of Meat and Fish.
The temperature inside the box is lower than in
other parts of the refrigerator compartment.
This enables considerably prolonged storage
of fresh food (meat and fish) without the need
to freeze. Furthermore, food retains its original
freshness and nutritional properties.
To ensure the ideal temperature in the
meat and fish box, select the intermediate
temperature setting.
Do not store fruit or vegetables in this box,
since the temperature may drop below 0°C,
causing water contained in the food to freeze.
Temperature indicator
• The temperature inside the box is displayed
on an indicator on the box lid (Fig.1)
• The coloured section indicates the ideal
temperature range for storage of meat and
fish
• The temperature inside the box requires
approximately one hour to stabilize.
E
L
A
G
I
D
B
C
F
H
Fig. 1
Important:
The temperature of the meat and fish box is
regulated by the temperature of the refrigerator
compartment. Therefore, if temperature
indicated for the box falls within section
press button (C) to adjust the refrigerator
temperature. The temperature inside the meat
and fish box will automatically correct itself.
Removing the box
To use the refrigerator without the meat and
fish box, proceed as follows:
1. Remove the lid of the meat and fish box
by releasing the two side catches on the
bottom of the lid (See Fig. 3)
2. Remove the box (See Fig. 2)
Fig. 2
To reinstate the meat and fish box, proceed as
follows:
1. Refit the box in place
2. Reposition the lid of the meat and fish box
Fig. 3
14
“ZERO DEGREES” BOX (depending on the model)
The “Zero Degrees” box is specifically designed to maintain
a low temperature and a suitable humidity level, in order to
keep foods fresher for longer (e.g. meat, fish, fruit and winter
vegetables).
Activating and deactivating the box
The temperature inside the box, when active, is approximately 0 °C.
To activate the compartment, press the
button shown in the figure for more than
1 second, until the symbol lights up
The symbol lit indicates that the compartment
is functioning. Press the button again for
more than 1 second to deactivate the
compartment
The following factors are vital for the “Zero Degrees” box to work properly:
- the refrigerator compartment must be switched on
- the temperature of the refrigerator compartment must be between +2°C and +6°C
- the box must be inserted to enable activation
- no special functions must have been selected (Standby, Cooling-Off, Vacation – where
applicable).
If one of these special functions has been selected, the “Zero Degrees” box must be deactivated
manually, and any fresh food inside it removed. If manual deactivation does not take place, the
box will be deactivated automatically after 8 hours.
Note:
- if the symbol does not light up when the box is activated, check that the box is properly inserted;
if the problem persists, contact your nearest authorized After-sales Service
- if the box is active and the drawer open, the symbol on the control panel may be deactivated
automatically. If the drawer is inserted, the symbol will become active again
- irrespective of the state of the box, a slight noise may be heard: this is normal and is not a cause
for concern.
- when the box is not active, the temperature inside it depends on the general temperature inside
the refrigerator compartment. In this case, we recommend it is used to store fruit and vegetables
which are not sensitive to cold temperatures (fruits of the forest, apples, apricots, carrots,
spinach, lettuce, etc.).
15
Important: If the function is activated and food with high water content is present, condensate
may form on the shelves. In this case, temporarily deactivate the function. When placing small
containers and food products on the top shelf of the “zero degrees” compartment, make sure they
do not accidentally fall between the drawer and the back of the refrigerator compartment.
Removing the “Zero Degrees” box:
The “Zero Degrees” box can be removed to create more space inside the refrigerator. In this
case proceed as follows:
- to facilitate removal, we recommend emptying (and if necessary, removing) the two lower door
trays
- switch off the box
- pull out the drawer and the white plastic shelf underneath the box.
Note: the upper shelf and the side supports cannot be removed.
To restore “Zero Degrees” box operation, make sure you replace the white plastic shelf
underneath the box before inserting the drawer and reactivating the function. To optimise energy
consumption, we recommend you deactivate the “Zero Degrees” box and remove it.
Clean the box and all its parts regularly, using a cloth and a solution of warm water and neutral
detergent specifically formulated for refrigerator interiors (take care not to immerse the white
plastic shelf underneath the box in water).
Before cleaning the box (including the outside), remove the drawer so as to disconnect
the box from the electricity supply.
Never use abrasive detergents.
16
HOW TO USE THE FREEZER COMPARTMENT
(if present)
The freezer compartment
can
also be used for freezing fresh food. The
quantity of fresh food that can be frozen in
24 hours is shown on the rating plate.
Freezing fresh food
• The recommended position for fresh food
is that indicated in Fig. 1, if a wire shelf is
present, or that in Fig. 2 for models with no
wire shelf.
• Place food in the middle of the compartment,
making sure it does not touch already
frozen food, but is placed at a distance of
approx. 20 mm (fig. 1 and 2).
compartment,
• For appliance with a
press button (D) to activate the Fast Freeze
function: the led (E) lights up and remains lit
for the duration of freezing.
• After approx. 26h the function switches off
automatically and the led (E) switches off. To
cancel the function manually, press button (D)
again.
Fig. 1
The table alongside shows the
recommended maximum storage time for
frozen fresh foods.
When purchasing frozen food products:
• Make sure the packaging is not damaged,
since the product quality may have
deteriorated. If the package is swollen or has
damp patches, it may not have been stored
under optimal conditions and defrosting may
have already begun.
• When shopping, leave frozen food purchases
until last and transport the products in a
thermally insulated cool bag.
• Place the items in the compartment as soon
as you get home.
• If food has defrosted even partially, do not
re-freeze it. Consume within 24 hours.
• Avoid, or reduce temperature variations to the
minimum. Respect the best-before date on
the package.
• Always follow the storage instructions on the
frozen food packages.
Fig. 2
Making ice cubes
• Fill the ice cube tray 2/3 full and place it in the
.
compartment
• Do not use sharp or pointed instruments to
detach the tray if it is stuck to the bottom of
compartment.
the
• Bend the ice tray slightly to remove the
cubes.
17
HOW TO DEFROST THE APPLIANCE
Before defrosting the appliance, unplug it
or switch off the power at the mains.
Defrosting of the refrigerator compartment
is completely automatic. Droplets of
water on the rear wall of the refrigerator
compartment indicate that the periodic
automatic defrost cycle is in progress.
The defrost water is automatically routed
to a drain outlet and into a container from
which it evaporates.
Clean the defrost water drain outlet regularly
using the tool supplied with the appliance
in order to ensure defrost water is removed
correctly. (Fig. 1)
Defrosting the compartment
(if present)
Defrost the
compartment once or twice
a year or when ice formation is excessive.
It is perfectly normal for ice to form. The
amount of ice which forms and the rate at
which it accumulates will vary depending on
ambient conditions and the frequency with
which the freezer door is opened. Ice formation
is concentrated at the top of the compartment
and does not affect the efficiency of the
appliance.
If possible, defrost the freezer when it is nearly
empty.
• Remove the food from the freezer
compartment and group together in a cool
place or in a cool bag.
• Leave the door open to allow the frost to
melt.
• Clean the interior of the freezer with a
sponge and warm water and/or neutral
detergent. Do not use abrasive substances.
• Rinse the interior and dry thoroughly.
• Put the food back into the freezer.
• Close the door.
Plug the appliance back in and switch on,
following the instructions in chapter “How to
operate the refrigerator compartment”. The
settings and selections made prior to switching
off will be restored.
Fig. 1
18
CLEANING AND MAINTENANCE
Before any cleaning or maintenance
operation, unplug the appliance from the
mains or disconnect the electrical power
supply.
• Clean the inside of the refrigerator
compartment periodically with a sponge
dampened in warm water and/or neutral
detergent. Rinse and dry with a soft cloth.
Do not use abrasive products.
• The separators must not be washed in water
but simply cleaned with a damp sponge.
• Clean the inside of the freezer compartment
when defrosting.
• Clean the air vents and condenser at the
rear of the appliance regularly with a vacuum
cleaner or brush.
• Clean the outside with a damp cloth. Do
not use abrasive products, scourers, stainremovers (e.g. thrichlorethylene acetone) or
vinegar.
Prolonged disuse
1. Empty the refrigerator.
2. Disconnect the appliance from the mains
power supply.
3. Defrost and clean the interior.
4. In the event of prolonged disuse, leave
the appliance door open to prevent mould,
odours and oxidation from forming.
5. Clean the appliance.
• Clean the inside of the low temperature
compartment (where present) when
defrosting.
• Clean the inside of the refrigerator
compartment periodically with a sponge
dampened in warm water and/or neutral
detergent. Rinse and dry with a soft cloth.
Do not use abrasive products.
19
TROUBLESHOOTING GUIDE
1.The appliance is not working.
• Is there a power failure?
• Is the plug properly inserted in the socket?
• Is the main power switch on?
• Has the fuse blown?
• Is the power supply cable damaged?
• Is button (B) set to Stand-by?
E
L
A
G
I
D
B
C
F
H
2. Temperature inside the compartments is not low enough.
• Are the doors closed properly?
• Is the appliance installed near a heat source?
• Are the air circulation grilles blocked?
3. Water collects at the bottom of the refrigerator compartment.
• Is the defrost water drain blocked?
4. The inside light is not working.
Perform the checks for problem 1 and then:
• Disconnect the appliance from the mains power supply.
• If your appliance has a bulb, refer to the instructions and illustration on the attached product
description sheet for inspection and replacement
• If your appliance has led lights, contact the after-sales service.
5. Excessive frost build-up in the low temperature compartment.
• Is the low temperature compartment door closed properly?
6. The acoustic alarm sounds, the inside light is intermittent and the red led (G) flashes
• The door has been open for more than 2 minutes. Press button (F) to mute the alarm or close
the door.
7. The acoustic alarm sounds, the red led (G) and the letter “F” flash on the display
• Temperature sensor fault. Press button (F) to deactivate the alarm and contact the after-sales
service
Note:
• If the alarm condition described at point 7 arises, the temperature setting button (C) and button
(D) cannot be used, but the appliance still maintains compartment temperatures that guarantee
safe storage conditions for food
• It is normal for the appliance to make a range of noises (gurgling and hissing due to expansion
in the refrigerant circuit ...) during the normal operating cycle.
20
AFTER-SALES SERVICE
• The Service number (the number after the
word SERVICE on the rating plate inside the
appliance)
• Your full address
• Your telephone number and area code
Before contacting the After-Sales Service:
1.See if you can solve the problem yourself
with the help of the Trouble-shooting guide.
2.Switch the appliance off and then on again
to check if the problem has been eliminated.
If it has not, switch off the appliance again
and repeat the operation after one hour.
3.If the problem persists after this course of
action, contact After-sales Service.
Note:
The direction of door opening can be
changed. If this operation is performed by
After-sales Service it is not covered by the
warranty.
Specify:
• the type of fault
• the appliance model
INSTALLATION
• Install the appliance away from heat
sources. Installation in a hot environment,
direct exposure to the sun or installation near
heat sources (heaters, radiators, cookers)
will increase power consumption and should
therefore be avoided.
• If this is not possible, the following minimum
distances must be respected:
- 30 cm from coal or paraffin stoves;
- 3 cm from electric and/or gas stoves.
• Fit the spacers (if supplied) on the rear of
the condenser positioned at the back of the
appliance.
• Install the appliance in a dry, well-ventilated
place, and ensure it is level, using the front
adjustment feet if necessary.
• Clean the interior.
• Fit the accessories.
• Regulations require that the appliance
be earthed. The manufacturer declines
all liability for injury to persons or
animals and for damage to property
resulting from failure to observe the
above procedures and reminders.
• If the plug and socket are not of the same
type, have the socket replaced by a qualified
electrician.
• Do not use extension leads or adapters.
Disconnecting the appliance
It must be possible to disconnect the appliance
by unplugging it or by means of a two-pole
switch fitted upline of the socket.
Electrical connection
• Electrical connections must be made in
accordance with local regulations.
• Voltage and power consumption are
indicated on the rating plate inside the
appliance.
21
ELECTRICAL CONNECTION FOR GREAT
BRITAIN AND IRELAND ONLY
Warning - this appliance must be earthed
Fuse replacement
If the mains lead of this appliance is fitted with a BS
1363A 13amp fused plug, to change a fuse in this type of
plug use an A.S.T.A. approved fuse to BS 1362 type and
proceed as follows:
1. Remove the fuse cover (A) and fuse (B).
2. Fit replacement 13A fuse into fuse cover.
3. Refit both into plug.
Important:
The fuse cover must be refitted when changing a fuse and
if the fuse cover is lost the plug must not be used until a
correct replacement is fitted.
Correct replacement are identified by the colour insert or
the colour embossed in words on the base of the plug.
Replacement fuse covers are available from your local
electrical store.
For the Republic of Ireland only
The information given in respect of Great Britain will
frequently apply, but a third type of plug and socket is also
used, the 2-pin, side earth type.
Socket outlet / plug (valid for both countries)
If the fitted plug is not suitable for your socket outlet,
please contact After-sales Service for further instruction.
Please do not attempt to change plug yourself. This
procedure needs to be carried out by a qualified technician
in compliance with the manufactures instructions and
current standard safety regulations.
22
5019 400 00947
DE
IT
GR
GB FR
SE NO DK
NL
ES
PT
FI
Bauknecht® registered trademark/TM Trademark of Whirlpool group of companies.
08/11

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement