- Home
- Domestic appliances
- Large home appliances
- Side-by-side fridge-freezers
- Bauknecht
- KGNF 18 A3+CONNECT
- Quick guide
advertisement
▼
Scroll to page 2
of 8
EN DAILY REFERENCE GUIDE THANK YOU FOR BUYING A BAUKNECHT PRODUCT. In order to receive a more complete assistance, please register your appliance on www.bauknecht.eu/register Before using the appliance carefully read Health and Safety guide. PRODUCT DESCRIPTION APPLIANCE 2 3 4 5 8 9 10 11 12 13 14 6 7 15 17 18 19 1 20 21 22 23 24 25 16 1. Control panel Refrigerator compartment 2. LED lighting 3. Fan 4. Fan cover and antibacterial filter area 5. Shelves 6. Bottle rack 7. Cheese box + Lid 8. Multi-flow cold air area 9. Sensor cover 10. Zero0 BioZone compartment (to keep foods fresher for longer) 11. Rating plate with commercial name 12. Fruits and vegetables crisper 13. Fridge drawer divider 14. Door reversibility kit 15. Door trays 16. Egg tray 17. Small items half balcony 18. Bottle separator 19. Bottle balcony 20. Door seal Freezer compartment 20. Door seals 21. Freezer drawers 22. Ice tray 23. Shelves 24. Freezer drawer divider 25. Middle drawer: coolest zone best for freezing fresh food 1 CONTROL PANEL 1 2 3 4 5 6 7 8 9 10 21 22 23 Menu 11 12 13 14 15 16 17 18 19 20 1. FRIDGE TEMPERATURE button/indicator 2. FRIDGE TEMPERATURE DISPLAY (°C) 3. VACATION MODE indicator 4. TEXT DISPLAY 5. FREEZE CONTROL indicator 6. FREEZER TEMPERATURE DISPLAY (°C) 7. FREEZER TEMPERATURE button 8. ANTIBACTERIAL AIR FILTER alarm indicator 9. BLACK-OUT ALARM indicator 10. MALFUNCTION ALARM indicator 11. ON/STAND-BY button/indicator 12. FAST COOL button/indicator 13. ZERO0 BIOZONE button/indicator 14. NIGHT TARIFF indicator 15. MENU button (to access additional function as: Language, Party Mode, Vacation, Smart display, Freeze control, Night tariff, Live) 16. PRO FRESH CONTROL indicator 17. CONNECTION STATE indicator 18. 0K button 19. PARTY MODE indicator 20. KEY LOCK button/indicator 21. FAST FREEZE button/indicator 22. STOP ALARM button/indicator 23. DOOR OPEN ALARM indicator This control panel has an innovative technology that will drive you are setting your fridge. When un option or a function is activated the indicator is fully lit on; when a option is available but not selected is partially lit on. NOTE: when you are setting temperature or interacting with the control panel, all the buttons are switched on. when you are not using the control panel, in order to save energy it will show you only the relevant information (the temperature set, the activated options). Every time you want to use the control panel and see all the functions, you just need to touch any button to wake up the panel. 2 EN ACCESSORIES EGG TRAY CHEESE BOX BOTTLE RACK BOTTLE SEPARATOR FREEZER DRAWER DIVIDER FRIDGE DRAWER DIVIDER ICE TRAY FIRST TIME USE HOW TO START THE APPLIANCE After set language, the control panel will be turned on default status. The default value settings are displayed for refrigerator (5 °C) and for Freezer compartment (-18°C). After starting the appliance, wait at least 4-6 hours before placing food into the fridge and into the freezer compartment. The default (factory) values of the fridge compartment settings light-up. CONNECTIVITY PRE-REQUISITE Important in order to use App, You have to : –– Check if the room in which your smart appliance is installed is covered by the signal of your home wireless network. –– Own a IOS device (Ipad/Iphone) or Android (Smartphone) –– Download the free “B-Live” app from the reference App store or Google play of your smart device and install it on your device. –– Subscribe (legal terms) to the service to be able to benefit of the features provided through the app. –– Register your refrigerator and connect it to your home wireless network. Find detailed information on connectivity setup in the App or in the Use & Care guide. After plugging in the appliance to the mains, press the On/Standby button to switch on. When switched on for the first time, the display will guide you to basic configuration (Set Language): a message in different languages is displayed in loop; Use the Menu button to scroll the list of languages and confirm the language by pressing OK button. When the refrigerator is connected to Internet,You can always monitor it but You ned to activate Remote Control mode in order to able operate on the appliance. See remote control function. To use this feature You need to own: –– a smart phone running Android 4.3 (or higher) with a 1280x720 (or higher) screen or a tablet or a smart phone running iOS 8 (or higher); –– a wireless router 2.4Ghz WiFi b/g/n connected to internet (verify with your smart device that the signal strength of your home wireless network close to the appliance is good). 3 DAILY USE See Use and Care Guide for more details on functions / see last page for information on how to obtain the Use and Care Guide FUNCTIONS ON/STANDBY To put the product in Stand-by, press and hold the On/Stand By button for 3 seconds. All the indicators turn off except On/ Standby button. Press again to reactivate the appliance. TEMPERATURE SETTING FRIDGE TEMPERATURE To adjust the Fridge Temperature, press the Fridge °C button The Fridge Temperature can be adjusted between +2°C and + 8°C, as shown by the Fridge Temperature Display (°C). . FREEZER TEMPERATURE To adjust the Freezer Temperature, press the Freezer °C button . The Freezer Temperature can be adjusted between -16°C and -24°C, as shown by the Freezer Temperature Display (°C). VACATION MODE This function can be activated to reduce the energy consumption of the appliance during a prolonged period of time. To activate the Vacation, choose the function from the menu, set to >ON< and press OK button to confirm the selection. To deactivate this function repeat the same procedure setting to >OFF<. When the function is enabled, the related symbol will light up and on the fridge display appears the sign “–“. Changing the temperature setpoint will automatically deactivate the function. The freezer compartment works properly. KEY LOCK To lock/unlock the keys of the Control Panel, press the Key Lock button for 3 seconds: the Key Lock indicator will be displayed for a short time and an acoustical signal will be played. SMART DISPLAY This optional function can be used to save energy. To activate the Smart Display, choose the function from the menu, set to >ON< and press OK button to confirm the selection. When activated, only 6th sense fresh control logo is lit on, other buttons and the displays are switched off to minimize the consumption. To deactivate this function repeat the same procedure setting to >OFF<. Remember that this function does not disconnect the appliance from the power supply, but only reduce the power consumed by external display Every time you want to use the control panel and see all the functions, you just need to touch any button to wake up the panel. USE OF MENU Touching the Menu button you will access additional functions and settings: 1. Language 2. Party Mode 3. Vacation 4. Smart display 5. Freeze control 6. Night tariff 7. Live 8. Exit When you touch Menu Button, the menu options will appear , into the display: you can scroll with the menu button choose and confirm through the OK button 1. LANGU AGE OK button MENU button 3. Vacation scroll menu functions Off >On< confirm your choice To exit menu you can choose Exit and confirm with OK, or just leave (display automatically will exit after 10 seconds the control panel will return to display default information). 4 EN FREEZE CONTROL Freeze Control is an advanced technology that reduces temperature fluctuations in the whole freezer compartment to minimum, thanks to an innovative air system, totally independent from the fridge. Freeze burns are reduced up to 60% and food preserves its original quality and color. To activate the Freeze Control choose the function from the menu, set to >ON< and press OK button to confirm the selection. To deactivate this function repeat the same procedure setting to >OFF<. The function works properly in a defined range of temperature: between ‐22°C and ‐24°C. In case of Fast freezing is engaged, the function “Freeze control” is inhibited until the Fast Freezing function switched off. PRO FRESH FRESH CONTROL This function automatically works to ensure the optimal conditions to preserve the stored food. If there are any variations, Pro Fresh Control immediately restores the ideal conditions. Results are outstanding: freshness preserved at best throughout the fridge cavity up to 4 times longer. FAST COOL Using Fast Cool function it is possible to increase the cooling in the refrigerator compartment. The use of this function is recommended when placing a very high quantity of food in the refrigerator compartment. Press the Fast Cool button to activate Fast Cool function. When activated, the Fast Cool indicator will turn on. The function is automatically disabled after 6 hours, or can be manually disabled by pressing Fridge °C button. FAST FREEZE The use of this function is recommended when placing a very high quantity of food to be frozen in the freezer compartment. 24 hours before freezing fresh food, press the Freezer button to activate the Fast Freeze function. When activated, the Fast Freeze indicator turns on. After 24 hours place the food to be frozen in the middle freezing zone of freezer compartment. The function is automatically disabled after 48 hours, or can be manually disabled by pressing Freezer °C button. PARTY MODE Party Mode function allows to quickly chill a drink bottle. Put the bottle in the freezer compartment, then enter in menu, choose PARTY MODE function and activate it setting to >ON< then press OK button to confirm the selection. After you activate PARTY MODE the remaining time to chill your drink is shown on the display, after this time the fridge give you an acoustical signal to inform your drink is ready and to remind to remove your bottle from freezer. Party mode deactivates at the end of time. To deactivate this function before time is end repeat the same procedure choosing Party Mode in menu and setting to >OFF<. Always remember to remove bottle from freezer. NIGHT TARIFF Night Tariff function allows one to concentrate the energy consumption of the product during off-peak time (usually coinciding with night time), when energy is available in large quantity and it costs less than during the day (only in specific countries –using multiple-rate system based on off-peak times- check your rate plan with your utility company) To activate this function enter in Menu, scroll functions by menu , then confirm NIGHT TARIFF with OK button and button set it to >ON<. To deactivate this function repeat the same procedure setting to >OFF<. After you activate the function, the product automatically starts to adapt the energy consumption to the time (i.e. Consuming more energy during the night then during the day). NOTE: when Live is active and your product is connected, you have an advanced release of Night Tariff option on your App: it is called Smart Defrost and automatically will set the best energy tariff basing on your rate plan (in this case the Night Tariff option is disabled in fridge Menu). 5 ZERO 0 BIOZONE COMPARTMENT The Zero 0 BioZone compartment is specifically designed to maintain a low temperature and a suitable humidity level, in order to keep foods fresher for longer (e.g. meat, fish, cold cuts ). Activating and deactivating the compartment To activate/deactivate the Zero 0 BioZone compartment, press the dedicated button on the control panel. FAN + ANTIBACTERIAL AIR FILTER The Fan improves temperature distribution inside the refrigerator compartment, allowing better preservation of stored food. If the appliance has the Fan it can be equipped with the antibacterial filter. Remove it from the box placed in the crisper drawer and insert into the fan cover. The replacement procedure is included in the filter box. The air filter symbol is lit on to indicates that it is expired and need to be replaced. The filter expires in 6 months. The User Interface gives a visual feedback, without acoustic alarm. On text display show message “Replace air filter”. After replaced the filter, press Stop Alarm button to reset message on the text display/antibacterial air filter indicator. QUICK IDENTIFICATION OF CONNECTION STATE ON APPLIANCE’S Connection State indicator’s Connection descriptions blinks fast Appliance searching connection to router blinks slowly ON solid 6 Appliance is connected with router but it is not able to connect server (for example ADSL not working) Appliance is connected to server and server recognize the appliance REMOTE CONTROL If Your refrigerator is connected to Internet, it allows You to operate and monitor the appliance remotely using a smart device. To enable Remote Control: •Make sure router is ON •Select from MENU :“7. LIVE”, confirm by click button •Select “1. Set up” confirm by click button •Press WPS button on Your router •Make sure the Connections Status indicator solid ON •The refrigerator is now in Remote Control mode and is ready to be operated via App. Use the Bauknecht App (B-Live) to control the appliance by remote , so You can : - check your fridge and activate options also when you are out of home - manage of food inventory and shopping list, receiving notification about food expiring - access additional functions as for instance the smart party mode - optimize energy consumptions leveraging the best energy tariff - access further information on best use of your fridge and suggestions for best preservation - receive feedback about fridge status in case of alarms While using Smart control of appliance all keys on user interface are enable. For more information about provisioning process follow the app instructions or see the Use and Care Guide. REFRIGERATOR LIGHT The light system inside the refrigerator compartment uses LEDs light, allowing a better lightning as well as a very low energy consumption. If the LED light system does not work, please contact the Service to replace it. Important: The refrigerator compartment light switches on when the refrigerator door is opened. If the door is kept open for more then 10 minutes the light will be automatically switched off. EN ALARM TABLE ALARM TYPE Door open alarm Temperature alarm Signal Cause The acoustical alarm is activated and The Fridge or Freezer door has the Alarm Indicator blinks. remained open for more than 2 minutes. The freezer Temperature display The inside temperature is not blinks (°C) and the Alarm Indicator adequate remains on. Cure Close the door or press the Stop Alarm to mute the acoustical alarm. ; the Press the Stop Alarm button acoustical alarm stops, the Temperature Display (°C) blinks and the Alarm Indicator remains on until a temperature < -10°C is reached. Antibacterial air filter alarm The Antibacterial filter alarm indicator Finished the validity of AntibacterialReplace the Antibacterial air filter, press lit on air filter. the Alarm button to reset it. Long black-out alarm The Black Out Alarm icon remains on, Prolonged power failure, able to blinks and the Alarm indicator cause the inside temperature to the Temperature display (°C) blinks, increase to 0°C. showing the maximum temperature reached during blackout. ; the Press the Stop Alarm button acoustical alarm stops, the Temperature Display (°C) blinks and the Alarm Indicator remains on until a temperature < -10°C is reached. Malfunction The letter “F” blinks on the display (°C). Product malfunction. Contact the After-sales Service. 7 HOW TO STORE FOOD AND BEVERAGE Legend TEMPERATE ZONE Suggested for the storage of tropical fruit, cans, drinks, eggs, sauces, pickles, butter, jam COOL ZONE Suggested for storage of cheese, milk, dairy food, delicatessen, yogurt COOLEST ZONE suggested for the storage of fish, meat, cold cuts. When Zero 0 BioZone function is deactivated, this drawer can be used to store also other type of food, as well as winter fruit, dessert. FRUIT & VEGETABLE DRAWER FREEZING ZONE DRAWER (MAX COOL ZONE) Suggested to freeze fresh/cooked food. FREEZER DRAWERS Note: The Grey tone of the legend doesn’t match with the color of drawers FRIDGE COMPARTMENT Use recyclable plastic, metal, aluminum and glass containers and cling film to wrap foods. Always use closed containers for liquids and for food that may give off or be tainted by odor or flavor transfer or cover them. If you have a little quantity of food to store in the refrigerator, we recommend to use the shelves above the crisper for fruits and vegetables since this is the coolest area of the compartment. MAINTENANCE AND CLEANING AND PROBLEM SOLVING For maintenance and cleaning and for Problem Solving see the Use and Care Guide. The Use and Care Guide can be obtained by: > After-Sales Service; phone number see in warranty booklet. > download from Whirlpool Website http://docs.whirlpool.eu/?brand=BK Foods which give off a large amount ethylene gas and those that are sensitive to this gas, such as fruit, vegetables and salad, should always be separated or wrapped so as not to reduce the storage life; for example do not store tomatoes together with kiwi fruits or cabbage. To avoid bottles falling over, you can use the bottle holder (available on selected models). Do not store food too close together to enable sufficient air circulation. The freezer is the ideal storage location for store frozen food, make ice cubes and freeze fresh food in the freezer compartment. The maximum number of kilograms of fresh food that can be frozen within a 24-hour period is indicated on the rating plate (… kg/24h). If you have a little quantity of food to store in the freezer, we recommend to use the coldest areas of your freezer compartment, corresponding to the middle area. CONTACTING AFTER-SALES SERVICE Provide both numbers shown on the service sticker when contacting the After-Sales Service team. http://www.bauknecht.eu The technical information are situated in the rating plate on the internal side of the appliance. Bauknecht® Registered trademark/TM Trademark of IRE Beteiligungs GmbH © Copyright Bauknecht Hausgeräte GmbH 2012. All rights reserved - http://www.bauknecht.eu 8 FREEZER COMPARTMENT 001 n EN 400010794119
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project