Indesit CX64SP4 (X) IL Instruction for Use
Indesit CX64SP4 (X) IL is a premium built-in cooker that makes it easy to cook your favorite meals. It has a sleek design that will complement any kitchen and is packed with features that make cooking a breeze.
The CX64SP4 (X) IL features a spacious 64-liter oven with four cooking modes, so you can cook everything from pizzas to roasts to perfection. The oven also has a handy grill function, perfect for grilling meats or vegetables.
The hob has four gas burners, including a powerful wok burner, so you can cook a variety of dishes at once. The burners are also equipped with flame failure safety devices, so you can be sure that your food is cooking safely.
Advertisement
Advertisement
Operating Instructions COOKER AND OVEN Contents GB English,1 Installation, 2-5 Positioning and levelling Electrical connection Gas connection Adapting to different types of gas Table of burner and nozzle specifications Table of characteristics Description of the appliance, 6 Overall view Control panel Start-up and use, 7-10 CX64SP4 IL CX64SP4 X IL Using the hob Setting the time Using the oven Cooking modes Planning your cooking Practical cooking advice Oven cooking advice table Precautions and tips, 11 General safety Disposal Respecting and conserving the environment Care and maintenance, 12 Switching the appliance off Cleaning the appliance Replacing the oven light bulb Gas tap maintenance Assistance GB Installation GB Before operating your new appliance please read this instruction booklet carefully. It contains important information concerning the safe installation and operation of the appliance. Please keep these operating instructions for future reference. Make sure that the instructions are kept with the appliance if it is sold, given away or moved. Disposing of combustion fumes The disposal of combustion fumes should be guaranteed using a hood connected to a safe and efficient natural suction chimney, or using an electric fan that begins to operate automatically every time the appliance is switched on (see figure). The appliance must be installed by a qualified professional according to the instructions provided. Any necessary adjustment or maintenance must be performed after the cooker has been disconnected from the electricity supply. Room ventilation The appliance may only be installed in permanentlyventilated rooms, in accordance with current national legislation. The room in which the appliance is installed must be ventilated adequately so as to provide as much air as is needed by the normal gas combustion process (the flow of air must not be lower than 2 m3/h per kW of installed power). The air inlets, protected by grilles, should have a duct with an inner cross section of at least 100 cm2 and should be positioned so that they are not liable to even partial obstruction (see figure A). These inlets should be enlarged by 100% - with a minimum of 200 cm2 - whenever the surface of the hob is not equipped with a flame failure safety device. When the flow of air is provided in an indirect manner from adjacent rooms (see figure B), provided that these are not communal parts of a building, areas with increased fire hazards or bedrooms, the inlets should be fitted with a ventilation duct leading outside as described above. Adjacent room Room requiring Fumes channelled straight outside Fumes channelled through a chimney or a branched flue system (reserved for cooking appliances) The liquefied petroleum gases are heavier than air and collect by the floor, therefore all rooms containing LPG cylinders must have openings leading outside so that any leaked gas can escape easily. LPG cylinders, therefore, whether partially or completely full, must not be installed or stored in rooms or storage areas that are below ground level (cellars, etc.). Only the cylinder being used should be stored in the room; this should also be kept well away from sources of heat (ovens, chimneys, stoves) that may cause the temperature of the cylinder to rise above 50°C. Positioning and levelling It is possible to install the appliance alongside cupboards whose height does not exceed that of the hob surface. ventilation A B A Ventilation opening for comburent air Increase in the gap between the door and the flooring After prolonged use of the appliance, it is advisable to open a window or increase the speed of any fans used. 2 Make sure that the wall in contact with the back of the appliance is made from a non-flammable, heatresistant material (T 90°C). To install the appliance correctly: Place it in the kitchen, the dining room or the bedsit (not in the bathroom). If the top of the hob is higher than the cupboards, the appliance must be installed at least 600 mm away from them. 420 mm. 420 mm. Min. 600 mm. Min. Min. min. 650 mm. with hood min. 700 mm. without hood HOOD flammable (see figure). If the cooker is installed underneath a wall cabinet, there must be a minimum distance of 420 mm between this cabinet and the top of the hob. This distance should be increased to 700 mm if the wall cabinets are Do not position blinds behind the cooker or less than 200 mm away from its sides. Any hoods must be installed according to the instructions listed in the relevant operating manual. Levelling If it is necessary to level the appliance, screw the adjustable feet into the places provided on each corner of the base of the cooker (see figure). The legs* fit into the slots on the underside of the base of the cooker. Electrical connection Install a standardised plug corresponding to the load indicated on the appliance data plate (see Technical data table). The appliance must be directly connected to the mains using an omnipolar circuit-breaker with a minimum contact opening of 3 mm installed between the appliance and the mains. The circuit-breaker must be suitable for the charge indicated and must comply with current electrical regulations (the earthing wire must not be interrupted by the circuit-breaker). The supply cable must be positioned so that it does not come into contact with temperatures higher than 50°C at any point. Before connecting the appliance to the power supply, make sure that: The appliance is earthed and the plug is compliant with the law. The socket can withstand the maximum power of the appliance, which is indicated by the data plate. The voltage is in the range between the values indicated on the data plate. The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it. Do not use extension cords or multiple sockets. Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible. The cable must not be bent or compressed. The cable must be checked regularly and replaced by authorised technicians only. The manufacturer declines any liability should these safety measures not be observed. Gas connection Connection to the gas network or to the gas cylinder may be carried out using a flexible rubber or steel hose, in accordance with current national legislation and after making sure that the appliance is suited to the type of gas with which it will be supplied (see the rating sticker on the cover: if this is not the case see below). When using liquid gas from a cylinder, install a pressure regulator which complies with current national regulations. To make connection easier, the gas supply may be turned sideways*: reverse the position of the hose holder with that of the cap and replace the gasket that is supplied with the appliance. Check that the pressure of the gas supply is consistent with the values indicated in the Table of burner and nozzle specifications (see below). This will ensure the safe operation and durability of your appliance while maintaining efficient energy consumption. Gas connection using a flexible rubber hose Make sure that the hose complies with current national legislation. The internal diameter of the hose must measure: 8 mm for liquid gas supply; 13 mm for methane gas supply. Once the connection has been performed, make sure that the hose: Does not come into contact with any parts that reach temperatures of over 50°C. Is not subject to any pulling or twisting forces and that it is not kinked or bent. Does not come into contact with blades, sharp corners or moving parts and that it is not compressed. 3 GB GB Is easy to inspect along its whole length so that its condition may be checked. Is shorter than 1500 mm. Fits firmly into place at both ends, where it will be fixed using clamps that comply with current regulations. Adapting to different types of gas If one or more of these conditions is not fulfilled or if the cooker must be installed according to the conditions listed for class 2 - subclass 1 appliances (installed between two cupboards), the flexible steel hose must be used instead (see below). Replacing the nozzles for the hob burners: 1. Remove the hob grids and slide the burners off their seats. 2. Unscrew the nozzles using a 7 mm socket spanner (see figure), and replace them with nozzles suited to the new type of gas (see Burner and nozzle specifications table). 3. Replace all the components by following the above instructions in reverse. Connecting a flexible jointless stainless steel pipe to a threaded attachment Make sure that the hose and gaskets comply with current national legislation. To begin using the hose, remove the hose holder on the appliance (the gas supply inlet on the appliance is a cylindrical threaded 1/2 gas male attachment). Perform the connection in such a way that the hose length does not exceed a maximum of 2 metres, making sure that the hose is not compressed and does not come into contact with moving parts. Checking the tightness of the connection It is possible to adapt the appliance to a type of gas other than the default type (this is indicated on the rating label on the cover). Adapting the hob Adjusting the hob burners minimum setting: 1. Turn the tap to the minimum position. 2. Remove the knob and adjust the regulatory screw, which is positioned inside or next to the tap pin, until the flame is small but steady. If the appliance is connected to a liquid gas supply, the regulatory screw must be fastened as tightly as possible: When the installation process is complete, check the hose fittings for leaks using a soapy solution. Never use a flame. 3. While the burner is alight, quickly change the position of the knob from minimum to maximum and vice versa several times, checking that the flame is not extinguished. The hob burners do not require primary air adjustment. After adjusting the appliance so it may be used with a different type of gas, replace the old rating label with a new one that corresponds to the new type of gas (these labels are available from Authorised Technical Assistance Centres). Should the gas pressure used be different (or vary slightly) from the recommended pressure, a suitable pressure regulator must be fitted to the inlet hose in accordance with current national regulations relating to regulators for channelled gas. 4 Table of burner and nozzle specifications Table 1 Liquid Gas Burner Diameter (mm) Thermal Power kW (p.c.s.*) By-Pass 1/100 Nozzle 1/100 Flow* g/h Nozzle 1/100 Nominal Reduced (mm) (mm) *** ** (mm) Flow* l/h Fast (Large)(R) 100 3,00 0,7 41 86 218 214 116 286 Semi Fast (Medium)(S) 75 1,90 0,4 30 70 138 136 106 181 Auxiliary (Small)(A) 55 1,00 0,4 30 50 73 71 79 95 28-30 20 35 37 25 45 Nominal (mbar) Minimum (mbar) Maximum (mbar) Supply Pressures GB Natural Gas 20 17 25 * ** *** At 15°C and 1013 mbar - dry gas Propane P.C.S. = 50.37 MJ/kg Butane P.C.S. = 49.47 MJ/kg Natural P.C.S. = 37.78 MJ/m³ To change over to natural gas, contact your nearest After-Sales Service Centre for the relevant nozzle kit. S R S A TECHNICAL DATA Oven dimensions (HxWxD) Volume Useful measurements relating to the oven compartment Burners CX64SP4 IL CX64SP4 X IL Voltage and frequency ENERGY LABEL 32x43.5x40 cm 56 l width 42 cm depth 44 cm height 8.5 cm may be adapted for use with any type of gas shown on the data plate see data plate Directive 2002/40/EC on the label of electric ovens. Regulation EN 50304 Energy consumption for Natural convection heating mode: : Traditional mode; Declared energy consumption for Forced convection Class heating mode: K Baking. EC Directives: 73/23/EEC dated 19/02/73 (Low Voltage) and subsequent amendments 89/336/EEC dated 03/05/89 (Electromagnetic Compatibility) and subsequent amendments 90/369/EEC dated 29/06/90 (Gas) and subsequent amendments 93/68/EEC dated 22/07/93 and subsequent amendments 2002/96/EC. 5 Description of the appliance GB Overall view Glass cover* Gas burner Containment surface for spills Hob grid GUIDE RAILS for the sliding racks position 5 position 4 position 3 position 2 position 1 Control panel GRILL rack DRIPPING PAN Adjustable foot Adjustable foot Control panel OVEN OPERATION indicator light THERMOSTAT ANALOGUE PROGRAMMER knob* indicator light 12 9 3 6 GAS BURNER ignition button* SELECTOR knob THERMOSTAT knob * Only available in certain models. 6 Hob BURNER control knobs Start-up and use Using the hob Lighting the burners For each BURNER knob there is a complete ring showing the strength of the flame for the relevant burner. To light one of the burners on the hob: 1. Bring a flame or gas lighter close to the burner. 2. Press the BURNER knob and turn it in an anticlockwise direction so that it is pointing to the maximum flame setting -. 3. Adjust the intensity of the flame to the desired level by turning the BURNER knob in an anticlockwise direction. This may be the minimum setting +, the maximum setting - or any position in between the two. If the appliance is fitted with an electronic lighting device* (see figure), press the ignition button, marked with the symbol , then hold the BURNER knob down and turn it in an anticlockwise direction, towards the maximum flame setting, until the burner is lit.The burner may be extinguished when the knob is released. If this occurs, repeat the operation, holding the knob down for a longer period of time. If the flame is accidentally extinguished, switch off the burner and wait for at least 1 minute before attempting to relight it. If the appliance is equipped with a flame failure safety device*, press and hold the BURNER knob for approximately 2-3 seconds to keep the flame alight and to activate the device. To switch the burner off, turn the knob until it reaches the stop position . Practical advice on using the burners For the burners to work in the most efficient way possible and to save on the amount of gas consumed, it is recommended that only pans that have a lid and a flat base are used. They should also be suited to the size of the burner: Burner ø Cookware diameter (cm) Fast (R) 24 - 26 Semi Fast (S) 16 - 20 Auxiliary (A) 10 - 14 To identify the type of burner, please refer to the diagrams contained in the Burner and nozzle specifications. For models equipped with a reducer grid, the latter must be used only for the auxiliary burner, when pans with a diameter of less than 12 cm are used. Setting the time 12 9 3 Press the PROGRAMMER knob and turn it in an anticlockwise direction to set the correct time. 6 The clock can only be set if the oven is connected to the electricity mains. In case of a power failure, the PROGRAMMER will stop: the correct time will need to be reset once the power has returned. Using the oven The first time you use your appliance, heat the empty oven with its door closed at its maximum temperature for at least half an hour. Ensure that the room is well ventilated before switching the oven off and opening the oven door. The appliance may emit a slightly unpleasant odour caused by protective substances used during the manufacturing process burning away. Before operating the product, remove all plastic film from the sides of the appliance. Never put objects directly on the bottom of the oven; this will avoid the enamel coating being damaged. 1. Select the desired cooking mode by turning the SELECTOR knob. 2. Select the recommended temperature for the cooking mode or the desired temperature by turning the THERMOSTAT knob. A list detailing cooking modes and suggested cooking temperatures can be found in the relevant table (see Oven cooking advice table). During cooking it is always possible to: Change the cooking mode by turning the SELECTOR knob. Change the temperature by turning the THERMOSTAT knob. * Only available in certain models. 7 GB GB Stop cooking by turning the SELECTOR knob to the 0 position. Always place cookware on the rack(s) provided. THERMOSTAT indicator light When this is illuminated, the oven is generating heat. It switches off when the inside of the oven reaches the selected temperature. At this point the light illuminates and switches off alternately, indicating that the thermostat is working and is maintaining the temperature at a constant level. OPERATION indicator light When this is illuminated, the oven is generating heat. Oven light This is switched on by turning the SELECTOR knob to any position other than 0. It remains lit as long as the oven is operating. By selecting 8 with the knob, the light is switched on without any of the heating elements being activated. Cooking modes A temperature value can be set for all cooking modes between 60°C and Max, except for the following modes GRILL (recommended: set only to MAX power level) 9 FAST COOKING mode The heating elements and the fan come on, guaranteeing the distribution of heat consistently and uniformly throughout the oven. Preheating is not necessary for this cooking mode. This mode is particularly suitable for cooking prepacked food quickly (frozen or pre-cooked). The best results are achieved using one cooking rack only. ; MULTI-COOKING mode All the heating elements (top, bottom and circular) switch on and the fan begins to operate. Since the heat remains constant throughout the oven, the air cooks and browns food in a uniform manner. A maximum of two racks may be used at the same time. Z PIZZA mode The circular heating elements and the elements at the bottom of the oven are switched on and the fan is activated. This combination heats the oven rapidly by producing a considerable amount of heat, particularly from the element at the bottom. If you use more than one rack at a time, switch the position of the dishes halfway through the cooking process. GRATIN (recommended: do not exceed 200°C). d X The central part of the top heating element is switched on. The high and direct temperature of the grill is recommended for food that requires a high surface temperature (veal and beef steaks, fillet steak and entrecôte). This cooking mode uses a limited amount of energy and is ideal for grilling small dishes. Place the food in the centre of the rack, as it will not be cooked properly if it is placed in the corners. TRADITIONAL OVEN mode Both the top and bottom heating elements will come on. When using this traditional cooking mode, it is best to use one cooking rack only. If more than one rack is used, the heat will be distributed in an uneven manner. K BAKING mode The rear heating element and the fan are switched on, thus guaranteeing the distribution of heat in a delicate and uniform manner throughout the entire oven. This mode is ideal for baking and cooking temperature sensitive foods (such as cakes that need to rise) and for the preparation of pastries on 3 shelves simultaneously. A GRILL mode GRATIN mode The top heating element and the rotisserie (where present) are activated and the fan begins to operate. This combination of features increases the effectiveness of the unidirectional thermal radiation provided by the heating elements through forced circulation of the air throughout the oven. This helps prevent food from burning on the surface and allows the heat to penetrate right into the food. The GRILL and GRATIN cooking modes must be performed with the oven door shut. 8 Planning your cooking Practical cooking advice Programming cooking time with immediate start Do not place racks in position 1 or 5 during fan-assisted cooking. Excessive direct heat can burn temperature sensitive foods. 1. Turn the PROGRAMMER knob in an anticlockwise direction until the desired cooking time is displayed. 2. Pull the PROGRAMMER knob and turn it in an anticlockwise direction until the marker corresponds with the current time. A click will indicate the end of the programming phase. 3. Select the desired cooking mode using the SELECTOR knob. The oven switches on immediately and remains on for the entire duration of the set cooking time. 4. When the set time has elapsed, a buzzer will sound. To stop the cooking process, turn the PROGRAMMER knob in an anticlockwise direction until the symbol ' is displayed. 5. Turn the SELECTOR knob to the 0 position. For example: it is 9:00 a.m. and a time of 1 hour and 15 minutes is programmed. The programme will stop automatically at 10:15 a.m. Programming a delayed cooking time 1. Turn the PROGRAMMER knob in an anticlockwise direction until the desired cooking time is displayed. 2. Pull the PROGRAMMER knob and turn it in an anticlockwise direction until the marker corresponds with the desired cooking start time. 3. Select the desired cooking mode using the SELECTOR knob. The oven will switch on at the set cooking start time and will remain on for the entire duration of the set cooking time. 4. When the set time has elapsed, a buzzer will sound. To stop the cooking process, turn the PROGRAMMER knob in an anticlockwise direction until the symbol ' is displayed. 5. Turn the SELECTOR knob to the 0 position. For example: it is 9:00 a.m., a time of 1 hour and 15 minutes is programmed and the start time is set to 11:00 a.m. The programme will start automatically at 11:00 and will end at 12:15. GB MULTILEVEL Use positions 2 and 4, placing the food that requires more heat on the rack in position 2. Place the dripping pan on the bottom and the rack on top. GRILL When using the GRILL cooking mode, place the rack in position 5 and the dripping pan in position 1 to collect cooking residues (fat and/or grease). When using the GRATIN cooking mode, place the rack in position 2 or 3 and the dripping pan in position 1 to collect cooking residues. We recommend that the power level is set to maximum. The top heating element is regulated by a thermostat and may not always operate constantly. PIZZA MODE Use a light aluminium pizza pan. Place it on the rack provided. For a crispy crust, do not use the dripping pan as it prevents the crust from forming by extending the total cooking time. If the pizza has a lot of toppings, we recommend adding the mozzarella cheese on top of the pizza halfway through the cooking process. To cancel programming, turn the PROGRAMMER knob anticlockwise until the symbol ' is displayed. 9 GB Oven cooking advice table Cooking modes Foods Duck Roast veal or beef Traditional Pork roast Oven Biscuits (short pastry) Tarts Tarts Fruit cakes Plum cake Sponge cake Stuffed pancakes (on 2 racks) Baking Small cakes (on 2 racks) Mode Cheese puffs (on 2 racks) Cream puffs (on 3 racks) Biscuits (on 3 racks) Meringues (on 3 racks) Frozen food Pizza Courgette and prawn pie Country style spinach pie Turnovers Lasagne Golden Rolls Fast Chicken morsels cooking Pre-cooked food Golden chicken wings Fresh Food Biscuits (short pastry) Plum cake Cheese puffs Pizza (on 2 racks) Lasagne Lamb Roast chicken + potatoes Mackerel MultiPlum cake cooking Cream puffs (on 2 racks) Biscuits (on 2 racks) Sponge cake (on 1 rack) Sponge cake (on 2 racks) Savoury pies Pizza Pizza Mode Roast veal or beef Chicken Soles and cuttlefish Squid and prawn kebabs Cuttlefish Cod filet Grilled vegetables Barbecue Veal steak Sausages Hamburgers Mackerels Toasted sandwiches (or toast) Grilled chicken Gratin Cuttlefish 10 Weight (in kg) Rack Position Pre-heating time (minutes) Recommended temperature Cooking time (minutes) 1 1 1 1 0.5 1 0.7 0.5 1.2 0.6 0.4 0.7 0.7 0.5 3 3 3 3 3 3 2 or 3 3 3 2 and 4 2 and 4 2 and 4 1 and 3 and 5 1 and 3 and 5 1 and 3 and 5 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 200 200 200 180 180 180 180 180 160 200 190 210 180 180 90 65-75 70-75 70-80 15-20 30-35 20-30 40-45 40-50 25-30 30-35 20-25 15-20 20-25 20-25 180 0.3 0.4 0.5 0.3 0.5 0.4 0.4 2 2 2 2 2 2 2 - 250 200 220 200 200 180 220 12 20 30-35 25 35 25-30 15-20 0.4 2 - 200 20-25 0.3 0.6 0.2 1 1 1 1+1 1 1 0.5 0.5 0.5 1 1.5 0.5 1 1 0.7 0.6 0.6 0.8 0.4 0.8 0.6 0.6 1 4 a nd 6 1.5 1.5 2 2 2 2 and 4 3 2 2 and 4 2 2 2 and 4 2 and 4 2 2 and 4 3 3 2 2 or 3 4 4 4 4 3 or 4 4 4 4 4 4 2 2 15 10 10 15 10 10 10 10 10 10 15 15 10 10 10 10 200 180 210 230 180 180 200 180 170 190 180 170 170 200 220 220 180 Max Max Max Max Max Max Max Max Max Max 200 200 15-18 45 10-12 15-20 30-35 40-45 60-70 30-35 40-50 20-25 10-15 15-20 20-25 25-30 15-20 25-30 60-70 10-12 8-10 10-15 10-15 15-20 15-20 15-20 10-12 15-20 3-5 55-60 30-35 Precautions and tips This appliance has been designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully. General safety The appliance was designed for domestic use inside the home and is not intended for commercial or industrial use. The appliance must not be installed outdoors, even in covered areas. It is extremely dangerous to leave the appliance exposed to rain and storms. Do not touch the appliance with bare feet or with wet or damp hands and feet. The appliance must be used by adults only for the preparation of food, in accordance with the instructions provided in this booklet. The instruction booklet accompanies a class 1 (insulated) or class 2 - subclass 1 (recessed between 2 cupboards) appliance. Do not touch the heating elements or certain parts of the oven door when the appliance is in use; these parts become extremely hot. Keep children well away from the appliance. Make sure that the power supply cables of other electrical appliances do not come into contact with the hot parts of the oven. The openings used for the ventilation and dispersion of heat must never be covered. Always use oven gloves when placing cookware in the oven or when removing it. Do not use flammable liquids (alcohol, petrol, etc...) near the appliance while it is in use. Do not place flammable material in the lower storage compartment or in the oven itself. if the appliance is switched on accidentally, they could catch fire. The internal surfaces of the compartment (where present) may become hot. Always make sure the knobs are in the position when the appliance is not in use. When unplugging the appliance, always pull the plug from the mains socket; do not pull on the cable. Never perform any cleaning or maintenance work without having disconnected the appliance from the electricity mains. If the appliance breaks down, under no circumstances should you attempt to perform the repairs yourself. Repairs carried out by inexperienced persons may cause injury or further malfunctioning of the appliance. Contact Assistance. Do not rest heavy objects on the open oven door. Disposal When disposing of packaging material: observe local legislation so that the packaging may be reused. The European Directive 2002/96/EC relating to Waste Electrical and Electronic Equipment (WEEE) states that household appliances should not be disposed of using the normal solid urban waste cycle. Exhausted appliances should be collected separately in order to optimise the cost of re-using and recycling the materials inside the machine, while preventing potential damage to the atmosphere and to public health. The crossed-out dustbin is marked on all products to remind the owner of their obligations regarding separated waste collection. For further information relating to the correct disposal of exhausted household appliances, owners may contact the public service provided or their local dealer. Respecting and conserving the environment You can help to reduce the peak load of the electricity supply network companies by using the oven in the hours between late afternoon and the early hours of the morning. Always keep the oven door closed when using the GRILL and GRATIN modes: This will achieve improved results while saving energy (approximately 10%). Check the door seals regularly and wipe them clean to ensure they are free of debris so that they adhere properly to the door, thus avoiding heat dispersion. 11 GB Care and maintenance GB 02/2007 - 195060335.00 Switching the appliance off Inspecting the oven seals Disconnect your appliance from the electricity supply before carrying out any work on it. Cleaning the appliance Check the door seals around the oven regularly. If the seals are damaged, please contact your nearest Authorised After-sales Service Centre. We recommend that the oven is not used until the seals have been replaced. Never use steam cleaners or pressure cleaners on the appliance. Replacing the oven light bulb The stainless steel or enamel-coated external parts and the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and neutral soap. Use specialised products for the removal of stubborn stains. After cleaning, rinse well and dry thoroughly. Do not use abrasive powders or corrosive substances. The hob grids, burner caps, flame spreader rings and burners may be removed to make cleaning easier; wash them in hot water and non-abrasive detergent, making sure all burnt-on residue is removed before drying them thoroughly. 1. After disconnecting the oven from the electricity mains, remove the glass lid covering the lamp socket (see figure). 2. Remove the light bulb and replace it with a similar one: voltage 230 V, wattage 25 W, cap E 14. 3. Replace the lid and reconnect the oven to the electricity supply. Gas tap maintenance Clean the terminal part of the flame failure safety devices* frequently. Over time, the taps may become jammed or difficult to turn. If this occurs, the tap must be replaced. The inside of the oven should ideally be cleaned after each use, while it is still lukewarm. Use hot water and detergent, then rinse well and dry with a soft cloth. Do not use abrasive products. This procedure must be performed by a qualified technician authorised by the manufacturer. Clean the glass part of the oven door using a sponge and a non-abrasive cleaning product, then dry thoroughly with a soft cloth. Do not use rough abrasive material or sharp metal scrapers as these could scratch the surface and cause the glass to crack. The accessories can be washed like everyday crockery, and are even dishwasher safe. Do not close the cover when the burners are alight or when they are still hot. Assistance Never use the services of an unauthorised technician. Please have the following information to hand: The type of problem encountered. The appliance model (Mod.). The serial number (S/N). The latter two pieces of information can be found on the data plate located on the appliance. * Only available in certain models. 12 ">

Public link updated
The public link to your chat has been updated.
Advertisement