Indesit IDC 85 S (GCC) Instruction for Use

Add to my manuals
12 Pages

advertisement

Indesit IDC 85 S (GCC) Instruction for Use | Manualzz
Instruction manual
TUMBLE DRYER
Contents
EN
Installation, 2
EN
AR
English, 1
, 13
Where to install the tumble dryer
Ventilation
Electrical connections
Preliminary information
Warnings, 4
General safety
Save energy and respect the environment
Care and maintenance, 6
Disconnecting the power supply
Cleaning the filter after each cycle
Checking the drum after each cycle
Emptying the water container after each cycle
Cleaning the condenser unit
Cleaning the tumble dryer
Description of the tumble dryer, 8
IDC 85
Features
Control panel
How to carry out a drying cycle, 9
Starting a drying programme
Drying settings, 10
Drying times
Drying programmes and options
Laundry, 11
Sorting laundry
Care labels
Special items
www.indesit.com
Troubleshooting,
Assistance, 12
This symbol reminds you to read this
instruction manual.
!
! Keep this manual at hand for immediate reference whenever
Spare parts
Essential Contact Informaion
Information on recycling and disposal
necessary. Always store this manual close to the tumble dryer and
remember to pass it on to any new owners when selling or transferring the appliance, so they may familiarise with the warnings
and suggestions herein contained.
! Read these instructions carefully: the following pages contain
important information on installation and useful suggestions for
operating the appliance.
1
Installation
Where to install the tumble dryer
10 mm
If the dryer is installed below a worktop,
ensure there are 10 mm
between the upper panel
of the dryer and any
objects above it, and 15
mm between the sides of
the machine and the walls
15 mm
15 mm
or furniture units adjacent
to it. This ensures
adequate air circulation.
The appliance must be
installed with the rear surface placed against a
wall.
Ventilation
Make sure that the dryer is installed in a room free of humidity
and with adequate air circulation. The flow of air around the
dryer is essential to allow water to condense during drying;
the dryer will not function properly if it is placed in an enclosed
space or inside a cabinet.
check the following:
Make sure your hands are dry.
The socket must have an earth connection.
The socket must be able to withstand the
machine’s maximum power output as
indicated on the rating plate.
The power supply voltage must fall within the
values indicated on the data plate.
Do not use extension leads. Do not pull the
power supply cable. Do not use multiple plug
adaptors if the appliance is fitted with a plug.
For appliances with fitted plug, if the plug is
not suitable for you socket outlet, contact a
qualified technician.
Some condensation may form if the dryer is used in a small or
cold room.
Water drain
If your dryer is installed next to a drain the water can be
plumbed into this drain. This does away with the need to
empty the water container. If the dryer is stacked onto or
installed next to a washing machine it can share the same
drain. The height of the drain must be less than 3’ (1 m) from
the bottom of the dryer.
Remove existing hose from position shown in picture A and fit a
suitable length of hose and connect as shown in picture B.
The drain tube has to be below 1 m from the bottom of
the Dryer
Make sure that the hose is not squashed or kinked
when the dryer is in its final location.
1
2
2
1
Less than 1m
EN
Picture A
Picture B
We do not recommend that the dryer is
installed in a cupboard but the dryer must never
be installed behind a lockable door, a sliding door
or a door with a hinge on the opposite side to
that of the dryer door.
Electrical connections
Before plugging the appliance into the socket,
2
The dryer must not be installed outdoors, even
if the space is sheltered.
Once installed, the dryer’s electrical wire and
plug must be within reach.
The power cord must not be bent or
squashed.
If the plug being replaced is a non-rewirable
type, then the cut-off plug must be disposed of
safely. DO NOT leave it where it can be inserted
into a socket and create a shock hazard.
The power must be regularly checked. If the
supply cord is damaged, it must be replaced
by service agent . (see Assistance).
The manufacturer denies any
responsibility should any of these rules
not be followed.
If in doubt about any of the above
consult a qualified electrician.
Preliminary information
Once the tumble dryer is installed, clean the inside of the drum
before operating it and remove any dirt accumulated during
transportation.
Maximum load sizes: maximum 8 kg
EN
3
Warnings
EN
! This appliance has been designed and built
according to international safety standards.
These warnings are given for safety reasons
and must be followed carefully.
General safety
• This
appliance can be used by children
aged from 8 years and above and
persons with reduced physical, sensory or
mental capabilities or lack of experience
and knowledge if they have been given
supervision or instruction concerning use of
the appliance in a safe way and understand
the hazards involved.
• This tumble dryer has been designed for
home, and not professional, use.
• Do not touch the appliance while barefoot
or with wet hands or feet.
• Unplug the machine by pulling on the plug,
not the cord.
• After using the dryer, turn it off and unplug
it. Keep the door closed to make sure that
children do not use it as a toy.
•Children should be supervised to ensure
that they do not play with the dryer.
• Cleaning and user maintenance shall not be
made by children without supervision.
•Children of less than 3 years should be
kept away from the appliance unless
continuously supervised.
• The appliance must be installed correctly
and have proper ventilation. The air intake
at the front of the dryer should never be
obstructed (see Installation).
• Never use the dryer on carpeting where the
pile height would prevent air from entering
the dryer from the base.
• Check to see if the dryer is empty before
loading it.
The back of the dryer could become
•
very hot. Never touch it while in use.
• Do not use the dryer unless the filter,
watercontainer and condenser are securely
in place (see Maintenance).
• Do not overload the dryer (see Laundry for
maximum loads).
• Do not load items that are dripping wet.
• Carefully check all instructions on clothing
labels (see Laundry).
• Do not tumble dry large, very bulky items.
• Do not tumble dry acrylic fibres at high
temperatures.
4
• Do not turn off the dryer when there are
still warm items inside.
• Clean the filter after each use (see
Maintenance).
• Empty the water container after each use
(see Maintenance).
�•
Clean the condenser unit at regular intervals
(see Maintenance).
�•
Do not allow lint to collect around the
dryer.
• Never climb on top of the dryer. It could
result in damage.
• Always follow electrical standards and
requirements (see Installation).
• Always buy original spare parts and
accessories (see Service).
To minimise the risk of fire in your
tumble dryer, the following should
be observed:
• Tumble dry items only if they have been
washed with detergent and water, rinsed
and been through the spin cycle. It is a fire
hazard to dry items that HAVE NOT been
washed with water.
�•
Do not dry garments that have been
treated with chemical products.
• Do not tumble dry items that have
been spotted or soaked with vegetable
or cooking oils, this constitutes a fire
hazard. Oil-affected items can ignite
spontaneously,especially when exposed
to heat sources such as a tumble dryer.
The items become warm, causing
an oxidisation reaction with the oil,
Oxidisation creates heat. If the heat
cannot escape, items can become hot
enough to catch fire. Piling, stacking or
storing oil-effected items can prevent
heat from escaping and so create a fire
hazard.If it is unavoidable that fabrics
containing vegetable or cooking oil or
those that have been contaminated with
hair care products be placed in a tumble
dryer they should first be washed with
extra detergent - this will reduce, but not
eliminate the hazard. They should not
be removed from the dryer and piled or
stacked while hot.
• Do not tumble dry items that have
previously been cleaned in or washed
in, soaked in or soiled with petrol/
gasoline, dry cleaning solvents or other
flammable or explosive substances. Highly
flammable substances commonly used in
domestic environments including cooking
oil, acetone, denatured alcohol, kerosene,
spot removers, turpentine, waxes and wax
removers. Ensure these items have been
washed in hot water with an extra amount
of detergent before being dried in the
tumble dryer.
�•
Do not tumble dry items containing foam
rubber (also known as latex foam), or
similarly textured rubber like materials.
Foam rubber materials can, when heated,
produce fire by spontaneous combustion.
�•
Fabric softener or similar products should
not be used in a tumble dryer to eliminate
the effects of static electricity unless the
practice is specifically recommended by the
manufacturer of the fabric softener product.
• Do not tumble dry undergarments that
contain metal reinforcements eg. bras
with metal reinforcing wires. Damage to
the tumble dryer can result if the metal
reinforcements come loose during drying.
�•
Do not tumble dry rubber, plastic articles
such as shower caps or babies waterproof
covers, polythene or paper.
• Do not tumble dry rubber backed articles,
clothes fitted with foam rubber pads,
pillows, galoshes and rubber coated tennis
shoes.
• Remove all objects from pockets such as
lighters and matches.
EN
! WARNING: Never stop the dryer before
the end of the drying cycle unless all
items are quickly removed and spread
out so that the heat is dissipated.
Save energy and respect the environment
• Wring out all items to eliminate excess water
before tumble drying (if you use a washing
machine first, select a high spin cycle). Doing
this will save time and energy during drying.
• Always dry full loads - you save energy: single
items or small loads take longer to dry.
• Clean the filter after each use to contain energy
consumption costs (see Maintenance).
5
Care and maintenance
EN
Disconnecting the power supply
! Disconnect the dryer when not in use or
during cleaning and maintenance operations.
Cleaning the filter after each
cycle
The filter is a fundamental component of the
dryer: its function is to collect lint and fluff that
form during drying.
Clean the filter once
drying is completed, by
rinsing it under
running water or cleaning
it with a vacuum cleaner.
Should the filter become
clogged, the flow of air
inside the dryer will be
seriously hampered:
drying times becomes
longer and more energy
is consumed. Also, the
dryer may become
damaged.
The filter is located in
front of the dryer seal (see Picture).
Removing the filter:
1. Pull the filter’s plastic handle upwards (see
Picture).
2. Clean the fluff off the filter and replace it
correctly. Ensure that the filter is pushed fully
home.
! Do not use the dryer unless the filter has
been replaced in its holder.
Checking the drum after each cycle
Rotate the drum manually to remove smaller items
(handkerchiefs) that could have been left inside the dryer.
Cleaning the drum
! Avoid using abrasives, steel wool or stainless steel cleaning
agents to clean the drum. A coloured film may appear on the
stainless steel drum surface: it may be caused by a
combination of water and/or cleaning agents such as wash-
6
softeners. This coloured film does not affect the dryer’s
performance.
Emptying the water container after
each cycle
2
Remove the water container and
empty it into a sink or other
suitable drain outlet, then
replace it correctly.
Always check the water
container and empty it before
starting a new drying cycle.
-Failure to empty the water container may cause
the following:
- The dryer stops heating (so the load may still be
damp at the end of the drying cycle).
- The “Empty water container” LED activates to
show that the water container is full.
Priming the Water Collection System
When your dryer is new, the Water Container will
not collect Water until the system is primed, this
will take 1 or 2 drying cycles. Once primed it will
collect Water during every cycle.
Cleaning the condenser unit.
•
Remove the condenser (see Picture
below) unit regularly (monthly) and clean off
any fluff deposits from the plates by rinsing it
with cold water running on the rear end of the
condenser.
Removing the condenser:
1.
Disconnect the
dryer from the power
supply and open the
door.
2.
Open the
condenser cover (see
Picture below), unlock the three catches by
turning them 90°
anti-clockwise, then pull
on the grip to remove
the condenser.
3.
Clean the surface
of the seals and replace
the unit with the arrows
pointing upwards, whi-
le making sure that the catches are securely
fixed.
Cleaning the tumble dryer
• The external metal, plastic and rubber parts can be
cleaned with a damp cloth.
• Clean the front air intake grille regularly (every 6 months)
with a vacuum cleaner to remove any lint, fluff or dust
deposits. Furthermore, remove any lint deposits from the
front part of the condenser and from the filter area, using a
vacuum cleaner every so often.
! Do not use solvents or abrasives.
! Have the dryer checked regularly by authorised technical
personnel in order to ensure that the electrical and mechanical parts work safely (see Assistance).
Quick Tips
!Remember to clean your filter and
Condenser unit after each load.
! Remember to empty your water
container after each load.
! Doing this will keep your machine
working at its BEST!
EN
2
Rating plate
Water container
Model & Serial
Numbers
Filter
Tap
Rear
Condenser Unit
Air intake
Catches
Condenser unit
Condenser cover
Handle
Front
7
Description of
the tumble dryer
Opening the door
EN
Press the
door
Features
Rating plate
Water container
Model
& Serial
Numbers
Filter
Air
intake
grille
Condenser
unit (cover
open)
Condenser cover
handle (pull to
open)
Control panel
High Heat
button
Drying time
selector knob
Start
button
Empty water
container
indicator light
Drying time selector knob
This is used to set the drying time: turn the knob in a clockwise direction until the indicator is set to the desired drying time. The 0
position switches off the dryer (see Drying settings). Do not attempt to turn the knob anticlockwise.
High Heat button
It can be used to customise the selected programme in accordance with your own requirements.
START button
Press the button to begin drying.
Empty water container indicator light
The “Empty water container” indicator light
signals that the water container must be emptied.
If the container becomes full during the programme, the dry cycle will stop and clothes will stay wet.
In order to avoid this procedure, always empty the water container after using the tumble dryer (see Care and maintenance).
8
How to carry out
a drying cycle
Starting a drying programme
EN
1. Plug the dryer into the power supply socket.
2. Select a suitable drying programme for the type of laundry (see Laundry).
3. Open the door, ensure that the filter is clean and securely placed and that the water container is empty and correctly slotted (see
Care and maintenance).
4. Load the machine, making sure that no piece of laundry gets between the door and the relative seal. Close the door.
5. Turn the “Drying time selector” knob until the indicator is pointing towards the most suitable drying time for the type of fabric in
that load. Use the table to check the relationship between fabric type and load capacity (see Drying settings), and make sure you
are familiar with the instructions provided for each type of fabric (see Laundry). Do not attempt to turn the knob anticlockwise.
6. If necessary, set the temperature using the HIGH HEAT button.
7. Press the START button to start the drying cycle.
Laundry can be checked while the drying programme runs and any garments already dry can be removed, while drying continues
for the remaining items. After closing the door, press the START button to resume machine operation.
8. The final Cool tumble phase (i.e. the fabrics are cooled) activates during the last few minutes of the drying programme; always
allow this phase to terminate.
9. Open the door, remove the laundry then clean the filter and replace it. Empty the water container and put it back in its slot (see
Care and maintenance).
10. Disconnect the dryer from the power supply.
9
Drying settings
EN
Drying times
The drying time depends on the size of the load and on the type of fabric it contains (see Table).
The cool tumble cycle runs during the final 10 minutes of the programme.
! For large loads, select the High Heat option if available.
Fabric
Standard Cotton –
high heat
Synthetics –
low heat
Load
1 kg
2 kg
3 kg
4 kg
5 kg
6 kg
7-8 kg
30 or 40
minutes
40 or 55
minutes
55 or 70
minutes
70 or 80
minutes
80 or 90
minutes
95 or 120
minutes
120 or 150
minutes
40 or 50
minutes
50 or 70
minutes
70 or 90
minutes
-
-
-
-
Standard Cotton is the most efficient program in terms of energy consumption (EU 392/2012). To reach maximum efficiency,
select the highest temperature option.
Drying times are approximate and may vary depending on the following:
• Amount of water retained by items after the spin cycle: towels and delicate items retain a lot of water (in case of some cotton
garments retaining a large amount of water, it is possible to use longer times than the ones recommended in the table).
• Fabrics: items of the same fabric, but with different texture and thickness may have different drying times.
• Amount of laundry: single items and small loads will take a short time to dry.
• Drying: if items are to be ironed, they can be removed from the dryer while still slightly damp. Items that require complete drying
can be left longer.
• Temperature of the room: the lower the temperature of the room, the longer it will take for the dryer to dry clothing.
• Bulk: certain bulky items require special care during the drying process. We suggest removing these items and replacing them in
the dryer once they have been shaken out: repeat this procedure several times during the course of the drying cycle.
! Do not over-dry items.
All fabrics contain natural dampness which helps to keep them soft and fluffy.
Drying programmes and options
Refresh
A short programme suitable for refreshing fibres and garments through the emission of cool air. It lasts about 10 minutes.
! As this is not a drying programme, it is not to be used for garments that are still wet.
High Heat button
The high heat button selects the drying temperature. When the button is out low heat is selected and when it is pushed in high heat
is selected.
10
Laundry
Sorting laundry
Drying times
• Check the symbols on the care labels of the various
garments to verify whether the garments can be safely
tumble dried.
• Sort laundry according to the type of fabric.
• Empty all pockets and check for loose buttons.
• Close zips and hooks and fasten belts and strings without
tightening them.
• Wring out garments to remove the maximum amount of
water possible.
Drying times are approximate and may vary depending on
the following:
! Do not load the dryer when garments are dripping wet.
Maximum load sizes
Do not overload the drum.
The following values indicate the weight of dry garments:
Natural fibres: maximum 8 kg
Synthetic fibres: maximum 3 kg
! Do not overload the dryer as this may result is reduced
drying performance.
Care labels
Always check the care labels, especially when placing
garments in the tumble dryer for the first time. Below are
the most commonly used symbols:
• Amount of water retained by items after the spin cycle:
towels and delicate items retain a lot of water.
• Fabrics: items of the same fabric, but with different texture and thickness may have different drying times.
• Amount of laundry: single items and small loads may
take longer to dry.
• Drying: if items are to be ironed, they can be removed
from the dryer while still slightly damp. Items that require
complete drying can be left longer.
• Heat setting.
• Temperature of the room: the lower the temperature
of the room, the longer it will take for the dryer to dry
clothing.
• Bulk: certain bulky items require special care during the
drying process. We suggest removing these items and
replacing them in the dryer once they have been shaken out: repeat this procedure several times during the
course of the drying cycle.
! Do not over-dry items.
All fabrics contain natural dampness which helps to keep
them soft and fluffy.
May be tumble dried.
Do not tumble dry.
The drying times provided refer to the automatic Cupboard
dry programmes.
The Timed drying settings are also indicated to enable you
to select the most suitable timed option.
The weight refers to dry items.
Tumble dry – high heat.
Tumble dry – low heat.
Troubleshooting
If you feel that the dryer is not working properly, consult the following troubleshooting suggestions before contacting the Technical
Assistance Centre (see Assistance).
Problem:
The dryer does not start.
Possible causes / Solutions:
• The plug has not been inserted far enough into the socket to make contact.
• There has been a power cut.
• The fuse has blown. Try connecting another appliance to the same socket.
• If an extension cord is used, try connecting the dryer plug directly into the socket.
• The door has not been closed properly.
• The programme has not been set correctly (see How to carry out a drying cycle).
• The START button has not been pressed (see How to carry out a drying cycle).
Drying times are too long.
• The filter has not been cleaned (see Care and maintenance).
• The water container must be emptied? The “Empty water container” indicator light is
on (see Care and maintenance).
• The condenser needs to be cleaned (see Care and maintenance).
• An incorrect drying time was selected for the type of load (see Laundry).
• The air intake grille is blocked (see “Installation” and “Care and Maintenance”).
• The items are too wet (see Laundry).
• The dryer is overloaded (see Laundry).
The dryer is noisy during the first few
minutes of operation.
• This is normal, especially if the dryer has not been used for a long time. If the noise
persists during the entire cycle, contact the Technical Assistance Centre.
11
EN
Assistance
EN
Before contacting the Technical Assistance Centre:
Spare parts
• Follow the troubleshooting guide to check whether problems can be solved personally (see Troubleshooting).
• If not, switch the dryer off and contact the Technical Assistance Centre closest to you.
This dryer is a complex machine. Attempting to repair it personally or with the aid of an unqualified personnel may put
the safety of people at risk, damage the machine or invalidate the spare parts guarantee.
Always contact a qualified technician when experiencing
problems with this machine.
Information on recycling and disposal
As part of our continual commitment towards environmental protection, we reserve the right to use recycled quality components to reduce costs for our customers and to minimise materials wastage.
• Disposing of the packaging materials: follow local regulations to allow for recycling of packaging materials.
• In order to minimise the risk of injury to children, remove the door and plug, then cut the power supply cord flush with the
appliance. Dispose of these parts separately to prevent the appliance from being connected to a power supply socket.
Disposal of old household appliances
European Directive 2012/19/EC concerning Waste Electrical and Electronic Equipment (WEEE) states that household
appliances should not be disposed of using the normal solid urban waste cycle. Exhausted appliances should be
collected separately in order to optimise the cost of re-using and recycling materials comprising the machine, while
preventing potential damage to public health and the environment. The crossed-out wheeled bin symbol appears on all
products to remind owners of the obligations regarding separate waste collection.
Owners should contact their local authorities or appliance dealers for further information concerning the correct disposal of
household appliances.
This appliance has been designed, constructed and distributed in compliance with the
requirements of European Directives:
- LVD 2014/35/EU, EMC 2014/30/EU and RoHS 2011/65/EU.
12

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Questions and Answers

What safety precautions should be taken when using the tumble dryer?
Always keep children and pets away from the appliance while it is in use. Do not overload the dryer, and never dry items that are still dripping wet. Clean the lint filter after each use, and empty the water container regularly.
How can I save energy and respect the environment when using my tumble dryer?
Wring out clothes thoroughly before drying to reduce drying time. Dry full loads to save energy, and clean the lint filter after each use to maintain optimal performance.
What should I do after each drying cycle?
Turn off and unplug the dryer. Clean the lint filter, empty the water container, and check the drum for any debris. Leave the door and drawer open to prevent mold or mildew.
How can I avoid static cling in my clothes?
Use a fabric softener or dryer sheet to reduce static cling. You can also try drying clothes at a lower temperature or for a shorter period of time.
What types of items should not be tumble dried?
Do not tumble dry items made of delicate fabrics, such as silk or wool. Avoid drying items with metal embellishments, such as zippers or buttons, as these can damage the dryer drum. Additionally, do not dry items that are heavily soiled or oily, as this can pose a fire hazard.

Related manuals

Download PDF

advertisement