Privileg PWC 72A+++ Daily Reference Guide

EN
DAILY REFERENCE
GUIDE
WWW
You can download the Safety Instructions and
the Use and Care Guide by visiting our website
docs‌.‌w hirlpool‌.‌e u and following the
instructions on the back of this booklet.
Before using the appliance carefully read the Health and Safety guide.
PRODUCT DESCRIPTION
APPLIANCE
1.
1. Worktop
2. Control panel
3. Water tank
4. Door
5. Door handle
6. Door filter (behind door)
7. Bottom filter (behind flap)
8. Adjustable feet (4)
2.
3.
5.
4.
6.
7.
8.
CONTROL PANEL
10.
11.
SENSOR
TROCKNEN
ENDE
WASSERBEHÄLTER
LEEREN
TÜRFILTER
WÄRMETAUSCHERFILTER
ZEITPROGRAMME
0
90’
KOCH-/BUNTWÄSCHE
EXTRATROCKEN
60’
KNITTERSCHUTZ
SCHRANKTROCKEN
30’
BÜGELTROCKEN
BAUMWOLLE
15’
PFLEGELEICHT
XXL
START
PAUSE
STARTVORWAHL
KURZ
KINDERSCHONEN SICHERUNG
3 SEC
PFLEGE+
KNITTERSCHUTZ
TROCKENGRAD
EXTRATROCKEN
SCHRANKTROCKEN
SOFTFINISH
MIX
BÜGELTROCKEN
7KG A+++
8.
9.
1. Startvorwahl / Start delay
function
2. Kurz / Rapid option
3. Schonen / Gentle option
4. Kindersicherung 3 SEC / Key lock
5. Pflege+ / Drum reverse option
6. Knitterschutz / Anti-crease
option
7. Trockengrad / Dry finishing
option
8. Programme selector
9. Start/Pause button
10. Failure indicators
11. Programme sequence indicator
1. 2. 3. 4. 5. 6. 7.
1
FIRST TIME USE
BEFORE USING THE DRYER
CHECK DRAIN HOSE AND WATER TANK
Make sure that the drain hose on the back of the dryer is fixed
correctly, either to the dryer’s water tank (see picture), or to your
domestic sewage system (see Installation guide).
2
Also make sure that the water tank is correctly inserted.
EN
DAILY USE
WARNING
See Use and Care Guide for more details on functions /
see last page for information on how to obtain the Use and Care Guide
Make sure that no lighters
or matches remain in the
laundry.
1. LOAD LAUNDRY
Prepare your laundry according to the recommendations in section
HINTS AND TIPS.
Make sure that pockets are empty, fasteners closed and ribbons tied
together.
Open the door and load the laundry. Observe the maximum load
sizes given in the PROGRAMME CHART.
2. CLOSE DOOR
Make sure that no laundry gets stuck between door glass and door
filter.
Make sure that the laundry
is not soaked with
flammable liquids.
4.
START PROGRAMME
Press the Start/Pause button; the indicator next to the button lights
up. The drying process starts.
The remaining programme duration is indicated on the display. It
can be recalculated and adapted in the course of the programme.
During such phases, an animation occurs on the display.
5. CHANGE THE SETTINGS OF A RUNNING PROGRAMME, IF
NEEDED
To change the settings of a running programme or start delay:
• press Start/Pause to put the running programme on pause
• change your settings
• press Start/Pause again to continue the programme.
6.
RESET A RUNNING PROGRAMME, IF NEEDED
Turn the programme selector to Off/O.
WARNING
Immediately open the door and unload the laundry, so that
eventual heat in the laundry can dissipate.
Close the door so that you can hear it click shut.
3. SET THE DESIRED PROGRAMME
Turn the knob to select the desired programme.
The default programme duration appears on the display.
7.
SWITCH OFF THE DRYER AFTER PROGRAMME END
At the end of the programme, „End“ appears on the display. Turn
the programme selector to Off/O to switch off the dryer. Open the
door and take out your laundry.
If you do not switch the dryer off after programme end, the dryer
drum rotates from time to time the next 10 minutes after
programme end, to reduce creasing of the laundry. The dryer will
switch off automatically in about a quarter of an hour after
programme end, to save energy.
Find more information regarding programmes in the PROGRAMME
CHART.
8. EMPTY WATER TANK / CLEAN DOOR FILTER / CLEAN
BOTTOM FILTER
Refer to section CARE AND MAINTENANCE.
Select options, if needed
If you want to select additional options, press the respective button
- the symbol on the display lights up.
Refer to section OPTIONS, FUNCTIONS AND INDICATORS for
more information.
3
HINTS AND TIPS
Respect the care labels of your laundry; make sure that it is
appropriate for being treated in a dryer.
CARE LABELS
The dots indicate the temperature degree for drying the laundry.
EMPTY ALL POCKETS
Objects like coins or keys can damage your laundry as well as the
drum.
Normal temperature
Reduced temperature
Do not tumble dry
SAVING TIPS
Always dry a full load; this optimizes the relative energy
consumption. The maximum load sizes for the various programmes
are indicated in the programme chart.
To reduce the drying time, make sure that the laundry is spun with
the maximum possible spin speed of the wash programme. This
reduces the moisture content in the laundry.
CONSUMPTION DATA
Data can differ in your home, mainly depending on the moisture
content of the laundry load.
Programme
Load
(Kg)
Spin Speed
(rpm)
Humidity
(%)
Energy consumption
(kWh)
Drying Time (min)
ECO COTTON *
7
3.5
1000
1000
60
60
1.31
0.74
183
115
ECO COTTON
7
7
800
1400
70
50
1.52
1.08
205
146
COTTON IRON DRY
7
7
7
800
1000
1400
70
60
50
1.08
0.93
0.78
189
162
135
SYNTHETICS
CUPBOARD DRY
3.5
1000
40
0.51
81
*Reference programmes for Energy Label / Regulation 392/2012 / EU
Values are based on the default programme setting, with clean door
and bottom filter. For consumer tests, the door filter and bottom
filter need to be cleaned after each cycle.
The energy consumption and drying time may differ from the values
above. They depend on the operation conditions in your home
(such as voltage fluctuation, mixture of textiles, humidity of the
textiles after spinning, load volume).
The values are determined according to European Norm 61121 and
refer to the default programme setting; changing the setting also
impacts the consumption data.
HEAT PUMP SYSTEM
This dryer is fitted with a sealed heat pump system to dry your
clothes. To operate, the heat pump contains fluorinated greenhouse
gases (Fgases) which are covered by the Kyoto Protocol. These F
gases are contained in a hermetically sealed unit. This sealed unit
contains 0.33 kg of the F gas R134a which acts as a refrigerant.
GWP = 1430 (1 t CO2).
4
Power Consumption - Watts
Left-on mode
0.81
Off-mode
0.11
EN
PROGRAMME CHART
Programme
Options
Care labels
Max load
Kurz / Rapid
Schonen /
Gentle
Kindersicherung 3 SEC /
Drum reverse
Knitterschutz
/ Anti-crease
Trockengrad
/ Dry
finishing
—
—
Extratrocken
/ Extra dry
Koch-/
Buntwäsche
/ Cotton
Schranktrocken /
Cupboard
dry
max
Bügeltrocken
/ Iron dry
Baumwolle / Eco Cotton
max
Extratrocken
/ Extra dry
—
—
SchranktroPflegeleicht / cken /
Synthetics
Cupboard
dry
3.5
Bügeltrocken
/ Iron dry
—
—
Mix
3.0
—
1.0
—
—
XXL / Big items
3.0
—
—
Zeitprogramme / Drying
time
max
—
—
SOFTFINISH
Selectable / Optional
— —
—
—
—
Not Selectable / Applicable
Maximum load sizes: 7 kg
5
PROGRAMMES
Make sure that your laundry is suitable to be treated in a tumble
dryer. Refer to HINTS AND TIPS / Care labels.
ECO BAUMWOLLE / ECO COTTON
For drying normally wet cotton laundry.
Standard cotton programme, suitable to dry normal wet cotton
laundry. Most efficient programme in terms of energy consumption
for drying cotton laundry.
The values on the Energy Label are based on this programme.
KOCH-/BUNTWÄSCHE / COTTON
For drying cotton laundry.
PFLEGELEICHT / SYNTHETICS
For drying laundry made of synthetic fibres.
MIX
For drying mixed laundry loads made of cotton, linen, synthetic
fibres and their blends.
6
SOFTFINISH
For finishing the air-drying process of woolen textiles. Woolens get
fluffy and smooth.
XXL / BIG ITEMS
For drying big laundry items, such as sleeping bags, blankets etc.
ZEITPROGRAMME / DRYING TIME
Time-restricted drying programme. Select programme duration of
15, 30, 60 or 90 minutes.
For all fabrics appropriate for tumble drying. Also suitable to add an
additional short 15 minutes drying phase after programme end.
OPTIONS, FUNCTIONS AND INDICATORS
Refer to the programme chart to check which options are available for
the selected programme.
OPTIONS
Kurz / Rapid
Enables quicker drying.
Schonen / Gentle
Enables a more gentle treatment of the laundry by reducing
the drying temperature.
Pflege+ / Drum reverse
Reduces creasing by increased drum reverse phases during
the programme.
Knitterschutz / Anti-crease
Helps to prevent creasing if you cannot unload the laundry
soon after programme end.
The dryer starts to tumble the laundry periodically a few
minutes after programme end. This tumbling will last up to
approximately 12 hours after end of the programme. You
can stop it at any time by switching off the dryer by turning
the programme selector to Off/0 position.
Zeitprogramme / Dry finishing
Enables slight variation of the dryness level at the end of
the programme by prolonging or shortening the
programme duration.
slightly dryer
standard dryness
slightly more humid
Kindersicherung 3 SEC / Key lock
To lock the buttons and knob of the control panel against
unwanted operation.
To lock the buttons and knob:
• A programme must be selected.
• Press and hold the Key lock button until the key symbol
lights up on the display. Knob and keys are locked now.
With activated key lock, the only working function is to
switch the dryer off by turning the programme selector to
the Off/O position.
If you switch the dryer on again by selecting a programme,
the key lock will remain active until you unlock it.
To unlock buttons and knob:
• Press and hold the Key lock button until the key symbol on
the display goes off.
INDICATORS
Failure indicators:
Wasserbehälter leeren / Water tank
(=> empty water tank)
Wärmetauscherfilter / Bottom filter
(=> clean bottom filter).
Türfilter / Door filter
(=> clean door filter)
In case of any failures, refer to section
TROUBLESHOOTING in the USE AND CARE GUIDE.
Programme sequence indicator
SENSOR
OPTIONS RAPID AND GENTLE ARE NOT COMBINABLE
FUNCTIONS
Startvorwahl / Start delay
Moves the start of your programme to a later time.
Choose a delay up to 12 hours.
• Select programme and options.
• Press the Start delay button repeatedly until the desired
delay time appears on the display.
• Press Start / Pause - the display shows the countdown of
the delay until start of the programme. The start delay
symbol on the display blinks, and the Start / Pause button
lights up. A sound by activation of the pump may occur.
• After the delay has expired, the dryer starts automatically.
On programme start, the display indicates the remaining
programme duration.
EN
TROCKNEN
ENDE
Shows the current programme phase (Sensor/Sensing /
Trocknen/Drying process / Ende/Programme end).
Knitterschutz / Anticrease
Indicates that the dryer is in the tumbling phase after
programme end, to avoid creasing of the laundry (refer to
DAILY USE / 7., and to OPTIONS, FUNCTIONS AND
INDICATORS / Anti-crease).
To cancel the Start delay
• Turn the programme selector to the Off/O position, or to
another programme.
7
CARE AND MAINTENANCE
WARNING
Switch off and unplug the
dryer before doing any
cleaning and maintenance.
EMPTY WATER TANK AFTER EACH DRYING CYCLE
Hold the handle and carefully pull out the water tank. Hold the full
water tank with both hands.
Empty the water and insert the container by pushing it back into
place. Make sure that it is properly inserted.
Caution, the water in the
water tank can still be hot.
CLEAN THE BOTTOM FILTER AFTER ABOUT EVERY FIFTH
DRYING CYCLE
Be Careful.
Some models are equipped with different filters, therefore some
descriptions below may differ from the filter present in the dryer. All
filters parts have to be cleaned
Open the bottom flap. Hold the handle
and pull out the bottom filter.
Remove the foam from the bottom filter,
to clean it. Clean the filter foam and the
filter by hand or under running water. Do
not wash it in the washing machine.
Wring out the filter foam. Do not insert it
in the bottom filter dripping wet.
CLEAN DOOR FILTER AFTER EACH DRYING CYCLE
Open the door and remove the door filter by pulling it upwards.
Fix the filter foam on the bottom filter.
Clean the filter chamber of the dryer with
a damp cloth or carefully with a vacuum
cleaner. Insert the bottom filter again.
Clap the filter handle down and close the
bottom flap.
Press the button to open the door filter. Remove the lint inside.
Close the filter and reinsert it in the right direction, so that it
completely integrates in the filter chamber.
HOW TO OBTAIN THE USE AND CARE GUIDE
> WWW Download the Use and Care Guide from our
website docs‌.‌whirlpool‌.‌eu (you can use this QR code),
specifying the product’s commercial code.
> Alternatively, contact our Client After‑sales Service
CONTACTING OUR AFTER‑SALES
SERVICE
You can find our contact details in the
warranty manual. When contacting our
Client After‑sales Service, please state the
codes provided on your product’s
identification plate.
xxxxxxxxxxxx
PRODUCT FICHE
WWW The product fiche with energy data of this appliance can be
downloaded from Whirlpool Website docs‌.‌whirlpool‌.‌eu
4 0 0 0 1 1 038595
Printed in Italy
8