Whirlpool WBA33872 NFC IX Instruction for Use


Add to my manuals
3 Pages

advertisement

Whirlpool WBA33872 NFC IX Instruction for Use | Manualzz
PRODUCT SHEET
EN
TO INCREASE STORAGE
The freezer compartment can be used without the
baskets to increase storage and for large products.
You can place the food products directly on the racks.
HOW TO START THE APPLIANCE FIRST TIME
After plugging the appliance to the mains, it starts the
operation automatically. After starting the appliance, wait
at least 4-6 hours before placing food into the appliance.
When the appliance is connected to the power supply,
the display lights up and all the icons appear on the
display for few seconds.
The default (factory) values of the freezer compartment
and refrigerator compartment settings light-up.
FAN WITH A BUTTON
A. Refrigerator Compartment
1.Lighting
2. Filter in the fan
2a. button of fan
2b. cover of fan
3. Shelves / Shelf area
4. Bottle rack
5. Multi-flow cold air system
6. Cooler compartment (best for meat and fish)
7. Rating plate with commercial name
8. Fruits and vegetables crisper
9. Crisper divider
10.Reversibility kit
11.Separator
12.Door trays
The fan improves temperature distribution inside the
refrigerator compartment, allowing better preservation of
stored food.
By default, the fan is ACTIVE.
It is advisable to keep the fan active, so that the “6th Sense
Fresh Control” function can work properly and also when
the ambient air temperature is above
27 ÷ 28°C or if you perceive drops of water on the glass
shelves or in the severe humidity conditions.
Note: Do not obstruct the air intake area with food
items.
To guarantee the right performance at low ambient
temperature (colder than 18 °C) and to minimize Energy
Consumption, turn off the fan.
B. Freezer Compartment
13.Upper basket (freezing zone)
14.Ice tray and/or cold accumulator
15.Shelves
16.Storage baskets for frozen food items
17.Door seals
To turn off the fan press the button (2a).
If the appliance has the fan it can be equipped with the
antibacterial filter.
Remove it from the box (found in the crisper drawer (item
8) and insert into the cover of fan (item 2b).
The replacement procedure is attached with the filter.
C. Control panel
Anti-bacterial protection (depending on the model):
- Antibacterial filter in the fan (2)
- Antibacterial additives in the Crisper (8)
- Door seals are made of material able to inhibit bacterial
growth (17)
Notes:
- Depending on the model the number and type of
accessories may vary.
- In case of power failure the cold accumulator helps to
keep optimal storage temperature longer.
- All shelves and door trays are removable.
- The internal temperatures of the appliance depend
on the ambient temperature, frequency of opening
the doors, as well as location of the appliance.
Temperature setting must consider these factors.
- The appliance accessories are not suitable for washing
dishwasher.
- After inserting food, ensure that the freezer
compartment door closes properly.
DE
GB
FR
NL
ES
PT
IT
GR
SE
NO
CONTROL PANEL
1. Temperature LEDs
2. On / Stand-by icon / button
3. 6th Sense Fresh Control icon
4. Eco Night icon / button
5. Temperature icon / button
6. Door Open icon
7. Reset button / Alarm icon
8. Key-Lock icon
9. Fast Cool icon / button
DK
FI
PL
CZ
SK
HU
RU
BG
RO
UA
PRODUCT SHEET
FUNCTIONS
On/Stand-by
This function turns On/Stand-by both the refrigerator
and freezer compartments.
To put the product in Stand-by, press & hold the
On/Stand-by button for 3 seconds. All the icons turn
off except On/Stand-by icon back light to indicate
that the appliance is in Stand-by. When the appliance
is in Stand-by, the light inside the refrigerator
compartment does not work.
Remember that this operation does not disconnect
the appliance from the power supply.
To switch the appliance on again, simply press the
On/Stand-By button.
Fridge Temperature
To adjust the Fridge Temperature, press the
Temperature button.
Is used to set desired temperature level, from
warmest
through lower
to coldest .
Pressing pushbutton set-point will change cyclically.
Temperature set-point is done for both compartments
at one time – fridge and freezer.
At first plug-in of appliance factory set-point is
chosen – medium position.
Following table shows set-points level:
high temp.
med-high temp.
Eco Night
Eco Night function allows to concentrate the energy
consumption of the product during off-peak time
(usually coinciding with night time), when energy
is available in large quantity and it costs less than
during the day (only in specific countries using
multiple-rate system based on off-peak times - check
your rate plan with your utility company).
To activate the function, press the
Eco Night
button at the starting moment of the off-peak rate
(depending on your specific rate plan). For example,
if the off-peak rate starts at 20:00, you have to press
the button at that time. When the
Eco Night icon
is ON, the function is active. After you activate the
function, the product automatically starts to adapt the
energy consumption to the time, i.e. consuming less
energy during the day then during the night.
medium temp.
med-low temp.
low temp.
Legend:
Led ON
Led OFF
Fast Cool
Using Fast Cool function it is possible to increase the
cooling in the refrigerator compartment. The use of
this function is recommended when placing a very
high quantity of food in the refrigerator compartment.
Press the Fast Cool button to activate/deactivate
Fast Cool function.
When activated, the Fast Cool icon will be turned on.
The function is automatically disabled after 6 hours,
or can be manually disabled by pressing again the
Fast Cool button.
Note:
- Fast Cool function should be also switched ON
before placing fresh food to be frozen in the freezer
compartment, in order to maximize the freezing
capacity.
DE
GB
FR
NL
ES
PT
IT
GR
SE
NO
EN
DK
IMPORTANT: In order to work in a correct way, the
function must be active both during the night and the
day.
The feature remains active until you deactivate it
(or if a blackout occurs, or if the product is switched
off). To deactivate the function, press the
Eco
Eco Night icon is OFF the
Night button. When the
function is not active.
Note: appliance energy consumption is declared with
Eco Night function disabled.
“6th Sense Fresh Control”
This function allows optimum storage conditions
(regarding temperature and humidity) to be quickly
reached inside the appliance. The fan must also be
switched on for it to work properly. The “6th Sense
Fresh Control” is activated by default.
To manually deactivate the function, press the
Fast Cool and
Eco Night buttons for 3 sec.: you
will hear a long acoustical signal as confirmation that
the feature has been deactivated.
The function can be reactivated by repeating the
same procedure: you will hear double long acoustical
signals as confirmation that the feature has been
activated.
In the event of an interruption in electricity or exit
from Stand-by to normal mode, the “6th Sense
Fresh Control” status resets to default i.e. active.
Smart Display
This energy saving feature allows to reduce power
consumption by automatically turning off the display
when not in use. To activate the Smart Display,
Temperature and Fast Cool buttons
press
at the same time for 3 seconds until the acoustic
signal sounds. After the Smart Display activation,
the display goes off, except the “6th Sense Fresh
Control” icon (and the alarms, if any). To adjust
temperature or use other functions, it is necessary
to activate the display by pressing any button. After
about 15 seconds without any action, the display will
go off again, with the “6th Sense Fresh Control”
icon remaining visible. To deactivate the function,
press
Temperature and Fast Cool buttons at
the same time for 3 seconds until the acoustic signal
FI
PL
CZ
SK
HU
RU
BG
RO
UA
PRODUCT SHEET
EN
To lock the keys, press
Reset button for 3
seconds until the display shows the Key Lock
icon: an acoustic signal confirms the function has
been selected. To unlock the keys, follow the same
procedure until the Key Lock icon switches off.
sounds. The display will come back to the normal
visualization. Smart Display function is automatically
disabled after Black-out. It is important to remember
that this function does not disconnect the appliance
from the power supply.
Key Lock
This function prevents anyone from inadvertently
changing settings or switching off the appliance.
MALFUNCTION AND ALARM INDICATIONS:
Operation Alarms
In the event of operation alarms, they will also be displayed in the Temperature LEDs, (e.g. Failure1, Failure 2, etc...)
call After-sales Service and specify the alarm code.
The acoustic alarm sounds, the
Alarm icon lights up and the 3 central LEDs in the Temperature LEDs blinks
according to failure code described below:
Failure code
Visualization
RC Set points blink on/off at 0,5 sec. Blinks ON 2 times then
remain off for 5 seconds. Pattern repeats.
Error 2
RC Set points blink on/off at 0,5 sec. Blinks ON 3 times then
remain off for 5 seconds. Pattern repeats.
Error 3
Led flashing
CLEANING
Regularly clean the appliance using a cloth and a
solution of warm water, with some soft detergent suitable
for cleaning the inside of the refrigerator compartment.
Do not use abrasive detergents or tools.
To ensure continuous and correct flow of defrost water,
regularly clean the inside of the draining hole on the back
of the refrigerator near the fruit and vegetable drawer,
using the tool provided.
Before carrying out any cleaning or maintenance
operation, unplug the appliance or disconnect it from the
power supply.
FR
NL
ES
PT
IT
GR
SE
NO
DEFROSTING THE REFRIGERATOR
COMPARTMENT
Refrigerator compartment defrosting is completely
automatic.
Droplets of water on the rear wall inside the refrigerator
compartment indicate that the automatic defrost phase
is in progress. The defrost water is automatically run
into a drain hole and collected in a container, where it
evaporates.
DEFROSTING THE FREEZER COMPARTMENT
No Frost freezers provide chilled air circulation around
the storage areas and prevent the formation of ice,
thereby completely eliminating the need for defrosting.
Frozen items don’t stick to the walls, labeling stays
legible and storage space remains neat and clear.
LED’s LIGHTING
If the inside LED light is not working, it must be
replace by service.
Important:
The refrigerator compartment light
switches on when the refrigerator door
is opened. After 10 minutes of door
opening the light switches off.
DK
FI
PL
CZ
SK
HU
RU
Printed in Poland 05/14
The Door Open icon and
Alarm icon lights up
blinking and the acoustic alarm sounds.
The alarm is activated when the refrigerator’s door is
left open for more than 2 minutes. Close the door to
disengage the alarm, or press once
Reset button to
mute the acoustic alarm for 2 minutes.
If the door is not closed, the acoustic alarm will sound
again after two minutes. To disengage the door alarms
close the door.
GB
x6
5019 637 01112/E
Led OFF
DOOR OPEN ALARM
DE
x3
RC Set points blink on/off at 0,5 sec. Blinks ON 6 times then
remain off for 5 seconds. Pattern repeats.
Error 6
Legend:
x2
BG
RO
UA

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Stainless steel Freestanding 320 L
  • 223 L LED Fridge interior light
  • 97 L Bottom-placed 4* 4.5 kg/24h
  • 244 kWh 42 dB

Related manuals

advertisement