Bauknecht | TRPC 74521 | Setup and user guide | Bauknecht TRPC 74521 Setup and user guide

Bauknecht TRPC 74521 Setup and user guide
EN
DAILY REFERENCE
GUIDE
THANK YOU FOR PURCHASING A BAUKNECHT
PRODUCT
To receive more comprehensive help and support, please
register your product at www.‌bauknecht.‌eu‌/‌register
WWW
You can download the Safety Instructions and
the Use and Care Guide by visiting our website
docs.‌bauknecht.‌e u and following the
instructions on the back of this booklet.
Before using the appliance carefully read the Health and Safety guide.
PRODUCT DESCRIPTION
APPLIANCE
1.
1.
2.
3.
4.
5.
6.
Worktop
Control panel
Water tank
Door
Door handle
Door filter (behind
door)
7. Bottom filter (behind
flap)
8. Adjustable feet (4)
2.
3.
5.
4.
6.
7.
8.
CONTROL PANEL
1. On/Off button (Reset if
long pressed)
2. Programme button
3. Settings button
4. Key lock
5. Steam option
6. Knob (Turn to select /
Press to confirm)
7. Finish in
8. Drying time
9. Dryness level
10.Options button
11.Start / Pause button
12.Display
13.Programmes area
12.
13.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
1
FIRST TIME USE
BEFORE USING THE DRYER
CHECK DRAIN HOSE AND WATER TANK
Make sure that the drain hose on the back of the dryer is fixed
correctly, either to the dryer’s water tank, or to your domestic
sewage system (see Installation guide).
Make sure that the water tank is correctly inserted.
When switching on the dryer for the first time, you will be asked to
• Set the desired language
• Adapt the value for your local water conductivity
• Set the dryer to recall the last used programme setting or not
when switching it on.
Refer to HINTS AND TIPS and OPTIONS, FUNCTIONS AND
INDICATORS / Settings.
The dryer should be installed in an ambient room temperature of
between 20 to 23°C for optimum performance. But will function if
the room is between 14 and 30°C.
DAILY USE
See Use and Care Guide for more details on functions / see last page for
information on how to obtain the Use and Care Guide
WARNING
Make sure that no lighters or
matches remain in the laundry
1. LOAD LAUNDRY
• Prepare your laundry according to the
recommendations in section “HINTS
AND TIPS”.
Make sure that pockets are empty.
• Open the door and load the laundry.
Observe the maximum load sizes given
in the PROGRAMME CHART.
2
Make sure that the laundry is
not soaked with flammable
liquids.
2. CLOSE THE DOOR
• Make sure that no laundry gets
stuck between door glass and door
filter.
• Close the door so that you can hear it click shut.
3. SWITCH ON DRYER
• Press the On/Off button until the
programme button lights up. An animation
occurs, and there is a sound. Afterwards the
dryer is ready to be operated.
EN
4. SET THE DESIRED PROGRAMME
GUIDED MODE - the button light will guide you through setting
your programme in the following order: selection of programme /
drying time (ONLY if Drying time or Airing programme is selected) /
dryness level (only if selectable/adjustable) / options. As soon as you
confirm a selection by pressing the knob, the button light will jump
to the next step.
• Select programme: INDIVIDUAL MODE
After you have switched on the dryer, you are not forced to follow
the GUIDED MODE.
It is up to you which order you choose to set your programme. To do
a setting, first press the relevant button, then turn the knob to
select, and finally press the knob to confirm.
The variety of options and dryness levels depends on the
programme selected. Therefore it is recommended to start your
setting with selecting the programme.
Make sure that the programme button lights up.
5. START PROGRAMME Turn the knob to select the desired programme. The indicator next
to the selected programme lights up. Confirm by pressing the knob.
6. CHANGE THE SETTINGS OF A RUNNING PROGRAMME, IF
Programme position
offers a choice of special programmes,
which you can select by turning the knob; afterwards press the
knob to confirm the selected programme.
Find more information regarding programmes in the Programme
Chart.
• Select Drying time, if needed
ONLY if you have selected programme Drying time or
Airing, you can set the desired drying / airing time from a minimum
of 10 minutes to maximum 180 minutes (three hours).
Make sure that the Drying time button lights up. Turn the knob to
select the desired drying / airing time. Confirm it by pressing the
knob.
• Set dryness level, if needed
If you want to change the dryness level, make sure that the
Dryness level button lights up. Turn the knob to select the desired
dryness level, then press the knob to confirm.
• Select options, if needed
• If you want to select additional options, make sure that the
options button lights up. The options which are selectable
for your programme are indicated by lighting arrows .
Turn the knob to select the desired options. The symbol of the
selected option blinks. To confirm it, press the knob.
Some options / functions can be selected by directly pressing the
button:
• Press and hold Start/Pause until the button lights up solidly;
the drying process starts.
• The duration can be recalculated and adapted in the course of
the programme. During such phases, an animation occurs on the
display.
NEEDED
You can still change some settings after a programme was started:
Adjust drying time (only if programme Drying time or Airing is
selected):
Adjust or cancel “Finish in”, if a delay was selected and started
Add or cancel an option, provided the progress of the programme
still allows it.
• Press the relevant button. The selected setting will blink for a few
seconds.
• While blinking, you can adjust the setting by turning the knob. If
the value or setting stopped blinking, press the button again.
• Press the knob to confirm the modification. If you do not confirm,
the modification will be confirmed automatically – the modified
setting will stop blinking.
The programme will continue automatically.
To change the settings of a running programme or delay, you can
also:
• Press Start/Pause to put the running programme on pause
• Change your settings
• Press Start/Pause again to continue the programme.
7. RESET A RUNNING PROGRAMME, IF NEEDED
• Press and hold the On/Off button until the display indicates
that the programme is cancelled.
8.
SWITCH OFF THE DRYER AFTER PROGRAMME END
• The display indicates that the cycle has finished. Press On/
Off to switch off the dryer. Open the door and take out your
laundry.
• The dryer will switch off automatically in about a quarter of an
hour after programme end, to save energy.
• If not switched off right after programme end, the dryer will
tumble the laundry for about 10 minutes, to prevent creasing.
The display shows an animation.
9. EMPTY WATER TANK / CLEAN DOOR FILTER / CLEAN
Refer to section OPTIONS, FUNCTIONS AND INDICATORS for more
information.
BOTTOM FILTER
• Refer to section CARE AND MAINTENANCE.
3
PROGRAMME CHART
Rapid
—
Gentle
—
Fresh
Care
Drying
time
Dryness
level
max
Selectable by options button
Steam
option
ECO COTTON
Max load
(Kg)
Programme
Care
labels
Directly selectable
—
—
—
COTTON
max
—
—
MIXED
2,0
—
—
—
—
—
—
SYNTHETICS
3,5
—
DELICATES
2,5
—
—
WOOL EXCELLENCE
1,0
—
—
JEANS
3,0
—
—
BIG ITEMS
3,0
—
—
AIRING
max
—
—
STEAM REFRESH
1,5
—
—
DRYING TIME
max
—
—
SHIRTS
2,5
—
—
SILK
2,5
—
—
—
—
SPORT
2,5
—
—
—
—
TOWELS
5
—
—
OUTDOOR
2
—
—
—
—
DOWN JACKETS
1,5
—
—
—
—
MINI LOAD
1,0
—
—
—
—
Selectable / Optional — Not Selectable / Applicable
Maximum load sizes: 7 kg
4
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
EN
HINTS AND TIPS
Respect the care labels of your laundry; make sure that it is
appropriate for being treated in a dryer.
DRYING CARE LABELS
The dots indicate the temperature degree for drying the laundry
Normal temperature
Reduced temperature
Do not tumble dry
SAVING TIPS
• To reduce the drying time, make sure that the laundry is spun with
the maximum possible spin speed of the wash programme. This
reduces the moisture content in the laundry.
• Always dry a full load; this optimizes the relative energy
consumption.
ADAPTING THE DRYER TO WATER CONDUCTIVITY
The drying results are affected by the conductivity of the water
used during washing. If, by modifying the available dryness levels
(iron dry; cupboard dry; extra dry), you are not satisfied with the
final drying results, you can adapt the water conductivity level. The
dryer comes with preset level 2. Choose between level 1 (most damp
results) and 5 (most dry results).
Refer to section OPTIONS, FUNCTIONS AND INDICATORS / Settings.
PROGRAMMES
Make sure that your laundry is suitable to be treated in a tumble
dryer. Refer to HINTS AND TIPS / Care labels.
ECO COTTON
For drying normally wet cotton laundry.
Standard cotton programme, suitable to dry normally wet cotton
laundry. Most efficient programme in terms of energy consumption
for drying cotton laundry.
The values on the Energy Label are based on this programme.
COTTON
For drying cotton laundry.
MIXED
For drying mixed laundry made of cotton, linen, artificial
fibres and their blends.
SYNTHETICS
For drying laundry made of synthetic fibres.
DELICATES
For drying delicate laundry which needs gentle treatment.
WOOL EXCELLENCE For drying woolens labeled with the Woolmark TOTAL EASY
CARE WOOL.
JEANS
For drying cotton jeans-wear and garments made of robust
jeans like material, such as trousers and jackets.
BIG ITEMS
For drying big laundry items, such as bathmats, blankets etc.
AIRING
For airing, refreshing and loosening up laundry for 30
minutes, without heating.
STEAM REFRESH
For refreshing laundry with steam.
Specifically designed to refresh and remove odors from dry and
clean casual garments like shirts, blouses, trousers made out of
cotton, synthetics and their blends.
Before loading the laundry into the drum, slightly humidify it by
spraying it with water (maximum 200 ml; use a water spray bottle).
For this programme, dryness level “cupboard dry” is preset and
cannot be changed.
After programme end, the garments shall be removed immediately
and put on clothes hangers to minimize wrinkling.
DRYING TIME
Time-restricted drying programme. Select programme
duration by option Drying time.
For all fabrics appropriate for tumble drying. Suitable to add an
additional short drying phase after programme end.
Refer to OPTIONS, FUNCTIONS AND INDICATORS / option Drying
time for more information.
SPECIAL PROGRAMMES
To set one of the following programmes, select and confirm
the special programmes position. Then turn the knob to
select one of the following programmes; the display indicates the
programme name. Confirm the desired programme by pressing the
knob.
Shirts
Gentle drying of shirts and blouses made of cotton, synthetic fibers
or their blends.
Towels
For drying robust laundry made of cotton, such as terry towels.
Silk
Gentle drying of silk garments.
5
Sport
For drying sports garments made of synthetics or cotton.
Downjackets
For drying big single items such as down jackets.
Outdoor
For drying outdoor clothes which are appropriate for being treated
in a dryer.
Miniload
Economic drying of small laundry loads.
OPTIONS, FUNCTIONS AND INDICATORS
Not all options are combinable; the non-combinable option
switches off automatically.
OPTIONS which are directly selectable by pressing the
respective button:
Steam option
Minimizes creasing of garments made of cotton, synthetics
and their blends by adding a humidifying phase at the end of the
drying cycle.
Use the option with small loads only, unload the garments from the
dryer immediately after programme end and put them on clothes
hangers.
The humidity level automatically adjusts to “cupboard dry” and
cannot be changed with this option.
Drying time
To adjust the desired Drying time if drying time or Airing
programme has been selected.
Press the button; the light goes on, and the drying time symbol on
the display lights up. Turn the knob to select the desired drying time
up to maximum 180 minutes, then press the knob to confirm.
Dryness level
To select the desired dryness level for the laundry load.
Press the button until it lights up. Turn the knob to select the
desired dryness level; chose between
iron dry (suitable to be ironed after the drying cycle,
therefore still slightly humid)
cupboard dry (dry enough to be put in a cupboard at the
end of the drying cycle)
extra dry (maximum dryness level)
and confirm by pressing the knob.
OPTIONS which are selectable with the Options button
Fresh Care
Helps to keep your laundry fresh if you cannot unload it soon
after programme end.
The dryer starts to tumble the laundry periodically a few minutes
after programme end. This tumbling will last up to approximately
12 hours after end of the programme. You can stop it at any time by
switching off the dryer with the On/Off button.
6
Gentle Enables a more gentle treatment of the laundry by
reducing the drying temperature.
Rapid Enables quicker drying.
FUNCTIONS:
Settings
The following settings can be changed / selected:
• Display language / Key tones / Cycle end alert / Display
contrast / Water conductivity (= adaptation to conductivity
of water used for washing; adjustable from 1 = most damp results,
to 5 = most dry results)/ Remember last used cycle (if set to “Off”,
Eco Cotton is the default programme which is selected when
switching on the dryer) / Eco mode (automatic switch-off function
after programme end) / Return to factory settings.
• Press and hold the Settings button for at least 3 seconds.
• Turn the knob to select the setting which you want to change;
confirm it by pressing the knob.
• Turn the knob to adjust the setting; confirm by pressing the knob.
• To exit the Settings mode, either turn the knob until the display
indicates that you can exit – then confirm by pressing the knob. Or
alternatively press the Settings button.
Key lock
To lock keys and knob of the control panel against
unwanted operation.
To lock the keys:
• The dryer must be switched on.
• Press and hold the Key lock button until the button lights
up. Knob and keys are locked now.
Only the On/Off button works
If you switch the dryer off and on again, the key lock
remains active until you unlock it.
To unlock the keys:
• Press and hold the Key lock button until the button light goes off.
Finish in
Enables to have the laundry ready at a particular time by
setting a delay until end of the programme.
Choose a delay up to 23 hours.
• Select programme and options.
• Press the “Finish in” button – the symbol over the button lights up.
EN
• Turn the knob to select a delay up to 23 hours. Confirm the desired
delay by pressing the knob.
• Press “Start / Pause” - the countdown of the delay starts. The
display indicates that Finish in is active.
• The programme starts automatically, in time to be finished at the
end of the delay period. On programme start, the delay on the
display is replaced by the remaining programme duration.
To cancel the delay
• either press “Start/Pause” to cancel the delay. To start the selected
programme immediately, press “Start/Pause” again .
• or press and hold “On/Off” to cancel the complete programme
setting.
INDICATORS
Failure
For any failures, refer to section TROUBLESHOOTING in the USE AND
CARE GUIDE.
Energy monitor
Gives feedback about the energy consumption of the
programme setting.
The less indicators light up, the more economic is your
programme setting.
CARE AND MAINTENANCE
WARNING
Switch off and unplug the
dryer before doing any
cleaning and maintenance.
EMPTY WATER TANK AFTER EACH DRYING CYCLE
Hold the handle and carefully pull out the water tank. Hold the full
water tank with both hands.
Empty the water and insert the container by pushing it back into place.
Make sure that it is properly inserted.
Caution, the water in the
water tank can still be hot.
CLEAN THE BOTTOM FILTER AFTER ABOUT EVERY FIFTH
DRYING CYCLE
Be Careful.
Some models are equipped with different filters, therefore some
descriptions below may differ from the filter present in the dryer. All
filters parts have to be cleaned
Open the bottom flap. Hold the handle and
pull out the bottom filter.
Remove the foam from the bottom filter, to
clean it. Clean the filter foam and the filter
by hand or under running water. Do not
wash it in the washing machine. Wring out
the filter foam. Do not insert it in the
bottom filter dripping wet.
CLEAN DOOR FILTER AFTER EACH DRYING CYCLE
Open the door and remove the door filter by pulling it upwards.
Fix the filter foam on the bottom filter.
Clean the filter chamber of the dryer with a
damp cloth or carefully with a vacuum
cleaner. Insert the bottom filter again. Clap
the filter handle down and close the
bottom flap.
Press the button to open the door filter. Remove the lint inside. Close
the filter and reinsert it in the right direction, so that it completely
integrates in the filter chamber.
7
CONSUMPTION DATA
ECO COTTON
*
ECO COTTON
COTTON IRON DRY
SYNTHETICS CUPBOARD
DRY
LOAD
(KG)
SPIN SPEED (rpm)
HUMIDITY (%)
ENERGY
CONSUMPTION (kWh)
DRYING TIME (min)
7
1000
60
1.73
164
3.5
1000
60
0.98
95
7
800
70
2.04
157
7
1400
50
1.48
116
7
800
70
1.73
134
7
1000
60
1.55
113
7
1400
50
1.37
98
3.5
1000
40
0.94
71
*Reference programmes for Energy Label / Regulation 392/2012 /EU
Values are based on the default programme setting, with clean
air and bottom filter. For consumer tests, the door filter and
bottom filter need to be cleaned after each cycle.
The energy consumption and drying time may differ from the values
above.
HEAT PUMP SYSTEM
This dryer is fitted with a sealed heat pump system to dry your
clothes. To operate, the heat pump contains fluorinated greenhouse
gases (Fgases) which are covered by the Kyoto Protocol. These F
gases are contained in a hermetically sealed unit. This sealed unit
contains 0.37 kg of the F gas R134a which acts as a refrigerant.
GWP = 1430 (1 t CO2).
PRODUCT FICHE
WWW The product fiche with energy data of this appliance can be
downloaded from Bauknecht Website docs.‌bauknecht.‌eu
HOW TO OBTAIN THE USE AND CARE GUIDE
> WWW Download the Use and Care Guide from our
website docs.‌bauknecht.‌eu (you can use this QR code),
specifying the product’s commercial code.
> Alternatively, contact our Client After‑sales Service
They depend on the operation conditions in your home (such as
voltage fluctuation, mixture of textiles, humidity of the textiles after
spinning, load volume).
The values are determined according to European Norm 61121 and
refer to the default programme setting; changing the setting also
impacts the consumption data.
Power Consumption - Watts
Left-on mode
1.07
Off-mode
0.40
CONTACTING OUR AFTER‑SALES
SERVICE
You can find our contact details in the
warranty manual. When contacting our
Client After‑sales Service, please state the
codes provided on your product’s
identification plate.
xxxxxxxxxxxx
PROGRAMME
4 0 0 0 1 1 046949
Printed in Italy
8
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising