Indesit XD95 T1I W Instruction for Use

XD95 XXX X
English
Operating Instructions
REFRIGERATOR/FREEZER COMBINATION
Contents
Operating Instructions, 1
Assistance, 2
Description of the appliance, 3
Description of the appliance, 4
Installation, 5
Start-up and use, 5
Maintenance and care, 7
Precautions and tips, 7
Troubleshooting, 8
Assistance
Before calling for Assistance:
• Check if the malfunction can be solved on your own (see
Troubleshooting).
• If after all the checks, the appliance still does not operate or
the problem persists, call the nearest Service Centre
Communicating:
• type of malfunction
• appliance model (Mod.)
• serial number (S/N)
This information can be found on the data plate located on the
bottom left side of the refrigerator compartment.
Never call on unauthorized technicians and always refuse
spare parts which are not originals.
- model
2
- serial number
Description of the appliance
Control panel
1. ON/OFF
The whole product (both fridge and freezer compartments)
can be turned on by pressing this button for 2 seconds.
The last set value is indicated on the interface. Press this button
to turn off the device. An audible signal will confirm the “off
commutation of the product”.
2. FRIDGE temperature indicator
It shows the temperature of the fridge compartment.
3. FRIDGE temperature setting
It allows you to change the fridge temperature value, in a
cyclical way; it also confirms the selected temperature on the
interface.
4 SUPER FREEZE indicator light (rapid freezing)
illuminates when the SUPER FREEZE button is pressed.
5 SUPER FREEZE button (rapid freezing)
To be used to freeze fresh foods. When it is pressed, the
SUPER FREEZE indicator light illuminates (see Start-up and
use).
4
2
1
3
5
3
Description of the appliance
Overall view
The instructions contained in this manual are applicable to different
model refrigerators. The diagrams may not directly represent the
appliance purchased. For more complex features, consult the
following pages.
1Levelling FEET
2 STORAGE compartment*
3 FREEZER and STORAGE compartment
4Container Cool Care Zone*
5 FRUIT and VEGETABLE bin *
6 WINE RACK *
7 SHELVES *
8 LAMP (see Maintenance).
9 Extractable STORAGE shelf WITH COVER *
10Removable multipurpose SHELVES *
11Bottle rack MULTI TASK ZONE*
12 BLACK OUT SENSOR*
*
Varies by number and/or position, available only on certain
models.
8
9
6
7
10
5
4
11
12
2
3
1
4
Installation
Start-up and use
! Before placing your new appliance into operation please read
these operating instructions carefully. They contain important
information for safe use, for installation and for care of the
appliance.
! Please keep these operating instructions for future reference.
Pass them on to possible new owners of the appliance.
Starting the appliance
Positioning and connection
Positioning
1. Place the appliance in a well-ventilated humidity-free room.
2.Do not obstruct the rear fan grills. The compressor and
condenser give off heat and require good ventilation to operate
correctly and save energy.
3. Leave a space of at least 10 cm between the top part of the
appliance and any furniture above it, and at least 5 cm between
the sides and any furniture/side walls.
4. Place the device far from heat sources (direct sun light, electric
kitchen etc.)
GB
! After transportation of the appliance, carefully place it in an
upright position and wait at least 3 hours before connecting it to
the electricity mains, to make sure it operates as it should.
• Clean the inside of the refrigerator well using warm water and
bicarbonate of soda before placing food inside it.
• The appliance comes with a motor protection control system
which makes the compressor start approximately 8 minutes
after being switched on. The compressor also starts each time
the power supply is cut off whether voluntarily or involuntarily
(blackout).
Freezer Compartment
When the product is switched on the freezer compartment is set to
its default value of -18°C. We recommend that the SUPER FREEZE
function is set in order to accelerate the cooling process of the
compartment; when the inside of the compartment has reached its
optimal temperature the function will be deactivated and the food
may be placed inside.
Chiller system
No Frost
50mm
Levelling
1. Install the appliance on a level and rigid floor.
2. If the floor is not perfectly horizontal, adjust the refrigerator by
tightening or loosening the front feet.
Electrical connections
After the appliance has been transported, carefully place it
vertically and wait at least 3 hours before connecting it to the
electricity mains. Before inserting the plug into the electrical socket
ensure the following:
• The appliance is earthed and the plug is compliant with the law.
• The socket can withstand the maximum power of the appliance,
• The voltage must be in the range between the values indicated
on the data plate located on the bottom left side (e.g. 220240V).
• The socket is compatible with the plug of the appliance. If
the socket is incompatible with the plug, ask an authorised
technician to replace it (see Assistance). Do not use extension
cords or multiple sockets.
! Once the appliance has been installed, the power supply cable
and the electrical socket must be easily accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced by authorised
technicians only (see Assistance).
! The manufacturer declines any liability should these safety
measures not be observed.
The No Frost system circulates cold air continuously to collect
humidity and prevent ice and frost formation. The system maintains
an optimal humidity level in the compartment, preserving the original
quality of the food, preventing the food from sticking together and
making defrosting a thing of the past. Do not block the aeration cells
by placing food or containers in direct contact with the refrigerating
back panel. Close bottles and wrap food tightly.
Using the refrigerator to its full potential
• Adjust the temperature using the display.
• Place only cold or lukewarm foods in the compartment, never
hot foods (see Precautions and tips).
• Remember that cooked foods do not last longer than raw foods.
• Do not store liquids in open containers: they will increase the
level of humidity in the refrigerator and cause condensation to
form.
MULTI TASK ZONE*
The new MULTI TASK ZONE is a flexible box with a plastic cover
located in the most visible area of the fridge.This flexible box
changes its function according to your needs: like a bottle holder
when the plastic cover is opened, it hosts up to 5 big bottles
(2 liters),ensuring steadiness and ergonomy; like a fruit and
vegetable compartment when the plastic cover is closed (with
bottle storage in the top balcony) to easily find out and control all
the items at a glance.
Cool Care Zone *
Area dedicated to the storage of fresh food, such as meat and
fish. Thanks to the low temperature inside the compartment, the
Cool Care Zone extends the period of time for which the food can
be stored, keeping it fresh for up to a week.
* Varies by number and/or position, available only on certain
models.
5
GB
SHELVES: with or without grill.
They are removable and adjustable in height and depth thanks to
the special guides (see the picture), allowing easy storage of large
containers and food. Height can be adjusted without complete
removal of the shelf.
BLACK OUT SENSOR*
At the first starting of the refrigerator, the black out sensor must
be in this position.
2
1
24 hours later, rotate the blackout sensor of 180 °.
Your food will be safe until the liquids are as shown below.
TEMPERATURE Indicator light*: to identify the coldest area in
the refrigerator.
1.Check that OK appears clearly on the indicator light (see
diagram).
2. If the word “OK” does not appear it means that the temperature
is too high:set the FRIDGE TEMPERATURE on a colder value,
and then wait 10 hours until the temperature becomes stable.
3.Check the indicator light again: if necessary, readjust it
following the initial process. If large quantities of food have
been added or if the refrigerator door has been opened
frequently, it is normal for the indicator not to show OK. Wait
at least 10 hours before you set the FRIDGE temperature on a
colder value.
If one or both of the liquids are dissolved, this is an indication of
increased temperature in the freezer.
Even the partial melting of one of the two liquids can show an
abnormal increase of the internal temperature.
If the liquid A1 melts, food must be eaten in a week.
If the liquid A2 melts, food should be thrown away.
Using the freezer to its full potential
• Do not re-freeze food that is defrosting or that has already been
defrosted. These foods must be cooked and eaten (within 24
hours).
• Fresh food for freezing should not be placed in contact with the
one already frozen; it should be placed in the lower FREEZER
and STORAGE compartment that provides the best freezing
rate.
• To freeze fresh food in the best and safest way possible,
activate the SUPER FREEZE function 24 hours before placing
the food in the freezer. After placing the food inside, activate
the SUPER FREEZE function again; it will be deactivated
automatically after 24 hours;
• Do not place glass bottles which contain liquids, and which are corked
or hermetically sealed in the freezer because they could break.
• The maximum quantity of food that may be frozen daily is
indicated on the plate containing the technical properties
located on the bottom left side of the refrigerator compartment
(for example: 2Kg/24h ).
! To avoid blocking the air circulation inside the freezer
compartment, it is advisable not to obstruct the ventilation
holes with food or containers.
! Do not open the door during freezing.
! If there is a power cut or malfunction, do not open the freezer
door. This will help maintain the temperature inside the freezer,
ensuring that foods are conserved for at least 12-18 hours.
! To get more space inside your freezer, you can take out any
drawers (and flaps, if appropriate), from their slots, by putting
your food directly on the provided shelves.
6
• Do not leave the door open for a long period of time. Close
the door of the freezer since the blackout sensor detector can
give the wrong alarm. Load or unload the freezer as quickly
as possible to avoid interventions of the black-out detector
sensor. Leaving the door open for a long period of time, the
liquid can dissolve on the black-out detector sensor, but the
food in the freezer can be still in good condition.
• Check the state of the liquid only in the presence of electricity.
The freezer is able to maintain the frozen food properly for xx
hours (depending on the outside temperature) in the case of
black-out. If the refrigerator is in a condition of black-out for a
shorter period, it is recommended not to open the doors and
wait.
• Place the hot food on the back of the freezer compartment.
The hot food that is close to the detector blackout sensor may
dissolve liquids and cause ill-timed interventions.
Maintenance and care
Precautions and tips
Switching the appliance off
! The appliance was designed and manufactured in compliance
with international safety standards. The following warnings are
provided for safety reasons and must be read carefully.
This appliance complies with the following Community Directives:
- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent
amendments;
-89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and
subsequent amendments;
- 2002/96/CE.
During cleaning and maintenance it is necessary to disconnect the
appliance from the electricity supply:
1. Press the ON/OFF button to switch off the appliance.
2. Pull the plug out of the socket.
! If this procedure is not followed, the alarm may sound. This alarm
does not indicate a malfunction. To restore normal operation, hold
the ON/OFF button down for more than two seconds. To disconnect
the appliance, follow points 1 and 2 above.
Cleaning the appliance
• The external and internal parts, as well as the rubber seals may
be cleaned using a sponge that has been soaked in lukewarm
water and bicarbonate of soda or neutral soap. Do not use
solvents, abrasive products, bleach or ammonia.
• The removable accessories may be soaked in warm water and
soap or dishwashing liquid. Rinse and dry them carefully.
• The back of the appliance may collect dust which can be
removed by delicately using the hose of a vacuum cleaner set
on medium power. The appliance must be switched off and
the plug must be pulled out before cleaning the appliance.
Avoiding mould and unpleasant odours
• The appliance is manufactured with hygienic materials which
are odour free. In order to maintain an odour free refrigerator
and to prevent the formation of stains, food must always be
covered or sealed properly.
• If you want to switch the appliance off for an extended period
of time, clean the inside and leave the doors open.
Replace LED * light
The LED lighting, thanks to the powerful diffused light, allows
a clear view of each food. If you need to replace the LED light,
contact the Technical Service.
Replacing the light bulb *
To replace the light bulb in the refrigerator compartment, pull out
the plug from the electrical socket. Follow the instructions below.
Access the light bulb by removing the cover as indicated in the
diagram. Replace it with a similar light bulb within the power range
indicated on the cover.
3
GB
General safety
• The appliance was designed for domestic use inside the home
and is not intended for commercial or industrial use.
• The appliance must be used to store and freeze food products
by adults only and according to the instructions in this manual.
• The appliance must not be installed outdoors, even in covered
areas. It is extremely dangerous to leave the appliance
exposed to rain and storms.
• Do not touch the appliance with bare feet or with wet or moist
hands and feet.
• Do not touch the internal cooling elements: this could cause
skin abrasions or frost/freezer burns.
• When unplugging the appliance always pull the plug from the
mains socket, do not pull on the cable.
• Before cleaning and maintenance, always switch off the
appliance and disconnect it from the electrical supply. -It is
not enough to turn off the device (with the ON/OFF button) to
eliminate all electric contacts.
• In the case of a malfunction, under no circumstances should
you attempt to repair the appliance yourself. Repairs carried
out by inexperienced persons may cause injury or further
malfunctioning of the appliance.
• Do not use any sharp or pointed utensils or electrical equipment
- other than the type recommended by the manufacturer - inside
the frozen food storage compartments.
• Do not put ice cubes taken directly from the freezer into your
mouth.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or lack of experience
and knowledge unless they have been given Supervision
or instruction concerning use of the appliance by a person
responsible for their safety. Children should be Supervised to
ensure that they do not play with the appliance.
• Keep packaging material out of the reach of children! It can
become a choking or suffocation hazard.
Disposal
• Observe local environmental standards when disposing
packaging material for recycling purposes.
• The European Directive 2012/19/EU on Waste Electrical and
Electronic Equipment (WEEE), requires that old household
electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be
collected separately in order to optimise the recovery and
recycling of the materials they contain and reduce the impact
on human health and the environment. The crossed out
“wheeled bin” symbol on the product reminds you of your
obligation, that when you dispose of the appliance it must be
separately collected. Consumers should contact their local
authority or retailer for information concerning the correct
disposal of their old appliance.
* Varies by number and/or position, available only on certain
models.
7
GB
Respecting and conserving the
environment
• Install the appliance in a fresh and well-ventilated room. Ensure
that it is protected from direct sunlight and do not place it near
heat sources.
• Try to avoid keeping the door open for long periods or opening
the door too frequently in order to conserve energy.
• Do not fill the appliance with too much food: cold air must
circulate freely for food to be preserved properly. If circulation
is impeded, the compressor will work continuously.
• Do not place hot food directly into the refrigerator. The internal
temperature will increase and force the compressor to work
harder and will consume more energy.
• Defrost the appliance if ice forms (see Maintenance). A thick
layer of ice makes cold transference to food products more
difficult and results in increased energy consumption.
Troubleshooting
If the appliance does not work, before calling for Assistance (see
Assistance), check for a solution from the following list.
The interface is off.
• The plug is not inserted in the outlet, or it is not powerful enough
to create a contact, or there is no electricity in the house.
The motor does not start.
• The appliance comes with a motor protection control (see
Start-up and use).
a) The alarm sounds.
a) The refrigerator door has remained open for more than two
minutes (the buzzer will stop sounding when you shut the door)
or the correct switching-off procedure was not followed (see
Maintenance).
The refrigerator and the freezer do not cool well.
• The doors do not close properly or the seals are damaged.
• The doors are opened too frequently.
• The FRIDGE TEMPERATURE is not correct (see Description).
• The refrigerator or the freezer have been over-filled.
The food inside the refrigerator is beginning to freeze.
• The FRIDGE TEMPERATURE is not correct (see Description).
• The food is in contact with the back inside wall of the
refrigerator.
The motor runs continuously.
• The SUPER FREEZE button was pressed: the yellow SUPER
FREEZE indicator is on (see Description).
• The door is not closed properly or is continuously opened.
• The outside ambient temperature is very high.
The appliance makes a lot of noise.
• The appliance has not been installed on a level surface (see
Installation).
• The appliance has been installed between cabinets that vibrate
and make noise.
• The internal refrigerant makes a slight noise even when the
compressor is off. This is not a defect, it is normal.
The back wall of the refrigerator unit is covered in frost or
droplets of water
• This shows the appliance is operating normally.
8
400011181989
09/2017
9