Electrolux | EFF80680BX | User manual | Electrolux EFF55550DK User Manual

Cooker Hood
EN user manual......................................................................................................................3
WE’RE thinking of you
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that
brings with it decades of professional experience and innovation. Ingenious and
stylish, it has been designed with you in mind. So whenever you use it, you can
be safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux
In the Electrolux webshop, you’ll find everything you need to keep all your
Electrolux appliances looking spotless and working perfectly. Along with a wide
range of accessories designed and built to the high quality standards you would
expect, from specialist cookware to cutlery baskets, from bottle holders to delicate
laundry bags…
Visit the webshop at:
Recycle the materials with the symbol Put the packaging in applicable
containers to recycle it.
Help protect the environment and human health and to recycle waste of
electricaland electronic appliances. Do not dispose appliances marked with the
symbol with the household waste. Return the product to your local recycling
facility orcontact your municipal office.
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available
The information can be found on the rating plate.
Model ____________________________
PNC _____________________________
Serial Number _____________________
• The Instructions for Use apply to several versions of this appliance. Accordingly, you may
find descriptions of individual features that do
not apply to your specific appliance.
• The manufacturer will not be held liable for any
damages resulting from incorrect or improper
• The minimum safety distance between the
cooker top and the extractor hood is 650 mm
(some models can be installed at a lower
height, please refer to the paragraphs on
working dimensions and installation).
• Check that the mains voltage corresponds to
that indicated on the rating plate fixed to the
inside of the hood.
• For Class I appliances, check that the
domestic power supply guarantees adequate
• Connect the extractor to the exhaust flue
through a pipe of minimum diameter 120
mm. The route of the flue must be as short as
• Do not connect the extractor hood to exhaust
ducts carrying combustion fumes (boilers,
fireplaces, etc.).
• If the extractor is used in conjunction with
non-electrical appliances (e.g. gas burning
appliances), a sufficient degree of aeration
must be guaranteed in the room in order to
prevent the backflow of exhaust gas. The
kitchen must have an opening communicating
directly with the open air in order to guarantee
the entry of clean air. When the cooker hood is
used in conjunction with appliances supplied
with energy other than electric, the negative
pressure in the room must not exceed 0,04
mbar to prevent fumes being drawn back into
the room by the cooker hood.
• If the supply cord is damaged, it must be
replaced from the manufacturer or its service
bottom of the pan only, making sure that it
does not engulf the sides.
Deep fat fryers must be continuously monitored during use: overheated oil can burst into
Do not flambè under the range hood; risk of
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
“ CAUTION: Accessible parts may become
hot when used with cooking ap-pliances”.
• 1. Switch off or unplug the appliance from the
mains supply before carrying out any maintenance work.
• Clean and/or replace the Filters after the specified time period (Fire hazard).
-- Activated charcoal filter W These filters are
not washable and cannot be regenerated,
and must be replaced approximately every
4 months of operation, or more frequently
with heavy usage.
-- Grease filters Z The filters must be cleaned
every 2 months of operation, or more
frequently for particularly heavy usage, and
can be washed in a dishwasher.
• The extractor hood has been designed exclusively for domestic use to eliminate kitchen
• Never use the hood for purposes other than
for which it has been designed.
• Never leave high naked flames under the
hood when it is in operation.
• Adjust the flame intensity to direct it onto the
-- Control lights, if present.
• Clean the hood using a damp cloth and a
neutral liquid detergent.
Button Function
Decreases the working speed or exits timed intensive speed. The number of lighted LEDs decreases.
Touch and hold the button for 5 seconds to activate/deacti- 1 Flash of button A+C indicates that the Remote control
vate the Remote control receiver.
receiver is Activated
2 Flashes of button A+C indicate that the Remote control
receiver is Deactivated
Turns the motor On/Off and displays the speed bar.
Increases the working speed.
The number of lighted LEDs increases.
Continuing to touch the button to activate intensive speed, LED bar fully on -> Intensive speed activated
which is timed to run for 10 minutes.At the end of the 10
minutes intensive speed will automatically drop to the level
below and the last LED will go out.
Decreases the lighting intensity.
Turns the lighting system Off/On at maximum intensity. Flash from button C indicates that the Activated Charcoal
Touch and hold for 5 seconds to enable/disable the
Filters alarm is activated
Activated Charcoal Filters alarm.
Flash from button A indicates that the Activated Charcoal
Filters alarm is deactivated
Increases the lighting intensity
With the filter alarm active, press the button to Reset the When the procedure terminates, the indication shown previously turns off:
Button Lit indicates the need to wash the metal grease filters. The
alarm itself. These indications are only visible when the
alarm is triggered after the Hood has been in operation for 100 working
motor is turned off.
Button Flashing indicates the need to change the activated charcoal
filters, and also to wash the metal grease filters. The alarm is triggered
after the Hood has been in operation for 200 working hours.
The LEDs for the set speed light up.
When the Hood is switched off, none of the functions is displayed, and only the normal lettering on the control panel is visible.
Warning: This appliance is fitted with a
white LED lamp classed as 1M according
to EN 60825-1: 1994 + A1:2002 + A2:2001
standards; maximum optical power emitted
@439nm: 7µW. Do not look directly at the light
through optical devices (binoculars, magnifying
• For replacement contact technical support.
(“To purchase contact technical support”).
436005864_01 - 120309
Download PDF