Electrolux EHD60150P User Manual

Add to my manuals
12 Pages

advertisement

Electrolux EHD60150P User Manual | Manualzz
user manual
Ceramic glass induction hob
EHD60150P
2 electrolux
Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
Contents
Safety information
Installation
Description of the appliance
Operating the appliance
2
3
5
6
Helpful hints and tips
Care and cleaning
What to do if...
Environment concerns
8
9
10
11
Subject to change without notice
Safety information
For your safety and correct operation of
the appliance, read this manual carefully
before installation and use. Always keep
these instructions with the appliance
even if you move or sell it. Users must
fully know the operation and safety features of the appliance.
General safety
Warning! Persons (including children)
with reduced physical sensory, mental
capabilities or lack of experience and
knowledge must not use the appliance.
They must have supervision or
instruction for the operation of the
appliance by a person responsible for
their safety.
Child safety
• Only adults can use this appliance. Children must get supervision to make sure
that they do not play with the appliance.
• Keep all packaging away from children.
There is a risk of suffocation.
• Keep children away from the appliance
when it is on.
Warning! Start the child safety device to
prevent small children and pets from an
accidental activation of the appliance.
Safety during operation
• Remove all packaging, stickers and layers
from the appliance before the first use.
• Set the cooking zones to "off" after each
use.
• Risk of burns! Do not put cutlery or saucepan lids on the cooking surface, as they
can become hot.
• Users with an implanted pacemaker must
keep their upper body minimum 30 cm
from induction cooking zones that are
switched on.
Warning! Fire danger! Overheated fats
and oils can catch fire very quickly.
Correct operation
• Always monitor the appliance during operation.
• Only use the appliance for domestic cooking tasks!
• Do not use the appliance as a work or a
storage surface.
• Do not put or keep very flammable liquids
and materials, or fusible objects (made of
plastic or aluminium) on or near the appliance.
• Be careful when you connect the appliance to the near sockets. Do not let electricity bonds touch the appliance or hot
cookware. Do not let electricity bonds tangle.
How to prevent a damage to the
appliance
• If the objects or cookware fall on the glass
ceramic, the surface can be damaged.
• Cookware made of cast iron, cast aluminium or with damaged bottoms can
scratch the glass ceramic if you move
them on the surface.
• Do not let cookware boil dry to prevent the
damage to cookware and glass ceramics.
• Do not use the cooking zones with empty
cookware or without cookware.
• Do not cover the parts of the appliance
with aluminium foil.
electrolux 3
• Do not cover the ventilation space of 5 mm
between the worktop and front of the unit
below it.
Warning! If there is a crack on the
surface, disconnect power supply to
prevent the electric shock.
Installation
Before the installation , note down
this data from the rating plate:
• Model description (Modell)................
• Product number (Prod.
Nr.) ............. ....
• Serial number (Ser. Nr.) ...............
You find the rating plate of the appliance on its lower casing.
949 592 880 02
EHD 60150P
58 GAD D5 AU 220-240 V 50-60 Hz Induction 7,4 kW
7,4 kW
ELECTROLUX
Safety instructions
Warning! You must read these!
Make sure that the appliance is not damaged because of transportation. Do not
connect a damaged appliance. If it is
necessary, speak to the supplier.
Only an authorised service technician
can install, connect or repair this appliance. Use only original spare parts.
Only use built-in appliances after you assemble the appliance into correct builtin units and work surfaces that align to
the standards.
Do not change the specifications or
modify this product. Risk of injury and
damage to the appliance.
Fully obey the laws, ordinances, directives and standards in force in the country where you use the appliance (safety
regulations, recycling regulations, electrical safety rules etc.)!
Keep the minimum distances to other
appliances and units!
Install anti-shock protection, for example install the drawers only with a protective floor directly below the appliance!
Protect the cut surfaces of the worktop
against moisture with a correct sealant!
Seal the appliance to the work top with
no space left with a correct sealant!
Protect the bottom of the appliance from
steam and moisture, e.g. from a dishwasher or oven!
Do not install the appliance adjacent to
doors and below windows! If not, hot
cookware can be hit off the hob when
you open doors or windows.
Warning! Risk of injury from electrical
current. Carefully obey the instructions
for electrical connections.
• The electrical mains terminal is live.
• Make electrical mains terminal free of voltage.
• Install correctly to give anti-shock protection.
• Loose and incorrect plug and socket connections can make the terminal become
too hot.
• A qualified electrician must install the
clamping connections correctly.
• Use a strain relief clamp on cable.
• Use the correct mains cable of type
H05BB-F Tmax 90°C (or higher) for a single-phase or two-phase connection.
• Replace the damaged mains cable with a
special cable (type H05BB-F Tmax 90°C;
or higher). Speak your local Service Force
Centre.
The appliance must have the electrical installation which lets you disconnect the appliance from the mains at all poles with a contact opening width of minimum 3 mm.
You must have correct isolation devices: line
protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips
and contactors.
4 electrolux
Assembly
min. 500 mm
min.
50 mm
min.
50 mm
min.
5 mm
600 mm
560+1 mm
490+1 mm
R5
min.
20 mm
min.
25 mm
min.
5 mm
min.
38 mm
min.
5 mm
electrolux 5
Description of the appliance
Cooking surface layout
1
2
180
180
210
145
mm
1 Induction cooking zone 1800W, with the
Power function 2800W
2 Induction cooking zone 1800W, with the
Power function 2800W
3 Induction cooking zone 1400 W, with
Power function 2500W
4 Control panel
5 Induction cooking zone 2300W, with the
Power function 3700W
mm
3
mm
mm
5
4
Control panel layout
1
3
2
12
4
5
6
11
10
9
7
8
Use the sensor fields to operate the appliance.
sensor field
1
2
function
starts and stops the hob
a lock with an indicator
3
starts and stops the key lock or child lock
activates Power function
4
cooking zones' indicators of timer
shows for which zone you set the time
5
the timer display
shows the time in minutes
6
a heat setting indicators
show the heat setting
7
pan detection and automatic
switch-off indicator
shows that:
• there is no cookware on the cooking zone
• the cookware is not correct
• automatic switch off is active
8
residual heat indicator
9
10
a control bar
/
shows that cooking zone stays hot
to set the heat setting
increases or decreases the time
6 electrolux
sensor field
function
11
12
selects the cooking zone
starts and stops STOP+GO
with an indicator
The induction cooking zones make the heat
necessary for cooking directly in the bottom
of the cookware. The glass ceramic is slightly
heated by the residual heat of the cookware.
+number in the timer display shows
that there is a malfunction.
Residual heat indicator
Warning!
Risk of burns from
residual heat!
Operating the appliance
Use the induction cooking zones with
suitable cookware.
On and Off
Touch
for 1 second to start or stop the
appliance.
Automatic Switch Off
The function stops the hob automatically and
if:
• all cooking zones are off.
• you do not set the heat setting after you
start the hob.
• you cover a sensor field with an object (a
pan, a cloth, etc.) for longer than 10 secAutomatic Switch Off times
onds. The sound operates until you remove the object.
• the hob gets too hot (e.g. when a saucepan boils dry). Before you use the hob
again, the cooking zone must be cool.
• you use incorrect cookware.
comes on
and after 2 minutes the cooking zone
stops automatically.
• you do not stop a cooking zone or change
the heat setting. After some time comes
on and the hob stops. See the table.
Heat setting
1-2
3-4
5
6-9
Stops after
6 hours
5 hours
4 hours
1.5 hours
The heat setting
Touch the control bar at the necessary heat
setting. The heat setting indicators come on.
electrolux 7
The automatic heat up
The automatic heat up function adds more
power to the cooking zones and you can get
a necessary heat setting in a shorter time.
Touch . The indicator flashes. Set the heat
setting (1-8). The indicator of the heat setting
comes on. The indicator above
comes on
and after some time goes out.
The time of the automatic heat up changes
for different heat settings.
11
10
9
8
7
6
5
4
3
2
1
0
Switching the Power function on and off
The Power function makes more power available to the induction cooking zones. The
Power function is activated for 10 minutes at
most. After that the induction cooking zone
automatically switches back to the highest
heat setting (9). To switch on, touch
, the
indicator above comes on. To switch off,
touch a heat setting (1-9).
Power management
The power management divides the power
between two cooking zones in a pair (see the
figure). The power function increases the
power to the maximum level for one cooking
zone in the pair and automatically decreases
in the second cooking zone to a lower power
1
2
3
4
5
6
7
8
9
level. The display for the reduced zone alternates.
Using the Timer
Use the timer to set how long the cooking
zone operates for one cooking session.
Set the timer after the selection of the
cooking zone.
You can set the heat setting before or after
you set the timer.
• Selection of the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
• Starting or changing the timer: touch
or of the timer to set the time ( 00 99 minutes). When the indicator of the
cooking zone flashes slower, the time
counts down.
• Stopping the timer: select the cooking
zone with
and touch to switch off the
timer. The remaining time counts backwards to 00 . The indicator of the cooking
zone goes out.
• Checking the remaining time: select
the cooking zone with
. The indicator of
the cooking zone flashes faster. Display
shows the remaining time.
When the time elapses, the sound operates
and 00 flashes. The cooking zone switches
off.
• Stopping the sound: touch
You can use the timer as a minute minder
while cooking zones do not operate. Touch
8 electrolux
. Touch + or - to select the time. When
the time elapses, the sound operates and
00 flashes
Starting the STOP+GO
function sets all cooking zones that
The
operate to a keep warm setting.
does not stop the timer function.
fully locks the control panel but not the
sensor field
.
• Touch
to start this function. The indicator comes on.
• Touch
to stop this function. The heat
setting that you set before comes on.
Locking / unlocking the control panel
.
You can lock the control panel, but not
It prevents an accidental change of the heat
setting.
Touch the symbol . The display comes on.
The Timer still operates.
Touch the symbol
to switch off this function. The display goes out.
When you switch off the appliance, you also
switch off this function.
Starting the child safety device
• Start the hob with
. Do not set the
heat settings .
• Touch
for 4 seconds. The indicator
comes on.
• Stop the hob with
.
Switching off the child safety device
• Start the hob with
. Do not set the
heat settings . Touch
for 4 seconds.
The indicator goes out.
• Stop the hob with
.
Overriding the child safety device for one
cooking session
• Start the hob with . The indicator comes
on.
• Touch
for 4 seconds. Set the heat
setting in less than 10 seconds. You
can operate the hob.
• When you stop the hob with
, the child
safety device operates again.
The child safety device
This function prevents an accidental operation of the hob.
Helpful hints and tips
Cookware for induction cooking zones
Important! In induction cooking a powerful
electromagnetic field generates an almost
instant heat inside the cookware.
Cookware material
• correct: cast iron, steel, enamelled steel,
stainless steel, a multi-layer bottom
(marked as correct by a manufacturer).
• not correct: aluminium, copper, brass,
glass, ceramic, porcelain.
Cookware is correct for an induction hob if
…
• ... some water boils very quickly on a zone
set to the highest heat setting..
• ... a magnet pulls on to the bottom of the
cookware.
The bottom of the cookware must be
as thick and flat as possible.
Cookware dimensions : induction
cooking zones adapt to the dimension of
the bottom of the cookware automatically to some limit. But, the magnetic
part of the bottom of the cookware must
have a minimum diameter of approximately 3/4 of the cooking zones.
Operating noises
If you can hear
• cracking noise: cookware is made of different materials (Sandwich construction).
• whistling: you use one or more cooking
zones with high power levels and the
cookware is made of different materials
(Sandwich construction).
• humming: you use high power levels.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer
to any defects.
electrolux 9
Energy saving
• If possible, always put the lids on the
cookware.
• Put cookware on a cooking zone before you start it.
Heat
setting
1
Use to:
Examples of cooking applications
The data in the table is for guidance only.
Time
Hints
Keep cooked foods warm
as required
Cover
1-2
Hollandaise sauce, melt: butter, chocolate, gelatine
5-25 min
Mix occasionally
1-2
Solidify: fluffy omelettes, baked eggs
10-40
min
Cook with a lid on
2-3
Simmer rice and milkbased dishes, heat- 25-50
ing up ready-cooked meals
min
Add at least twice as much liquid as
rice, stir milk dishes part way through
3-4
Steam vegetables, fish, meat
20-45
min
Add a few tablespoons of liquid
4-5
Steam potatoes
20-60
min
Use max. ¼ l water for 750 g of potatoes
4-5
Cook larger quantities of food, stews and 60-150
soups
min
Up to 3 l liquid plus ingredients
6-7
Gentle fry: escalope, veal cordon bleu,
cutlets, rissoles, sausages, liver, roux,
eggs, pancakes, doughnuts
as required
Turn halfway through
7-8
Heavy fry, hash browns, loin steaks,
steaks
5-15 min
Turn halfway through
9
Boil large quantities of water, cook pasta, sear meat (goulash, pot roast), deep fry chips
The Power function is suitable for heating
large quantities of water.
Information on acrylamides
Important! According to the newest
scientific knowledge, if you brown food
(specially the one which contains starch),
acrylamides can pose a health risk. Thus, we
recommend that you cook at the lowest
temperatures and do not brown food too
much.
Care and cleaning
Clean the appliance after each use.
Always use cookware with clean bottom.
Warning! Sharp objects and abrasive
cleaning agents will damage the
appliance.
For your safety, do not clean the appliance with steam blasters or high-pressure cleaners.
Scratches or dark stains on the glass
ceramic have no effect on how the appliance operates.
Removing the dirt:
1. – Remove immediately: melting plastic, plastic foil, and food containing
sugar. Use a special glass ceramic
scraper. Put the scraper on the glass
ceramic surface at an acute angle and
slide the blade on the surface.
10 electrolux
– Stop the appliance and let it cool
down before you clean: limescale
rings, water rings, fat stains, shiny metallic discolorations. Use a special
cleaner for glass ceramic or stainless
steel.
2. Clean the appliance with a damp cloth
and some detergent.
3. At the end rub the appliance dry with
a clean cloth.
What to do if...
Problem
Possible cause and remedy
You cannot start the appliance or
operate it.
• You touched 2 or more sensor fields at the same time. Only
touch one sensor field.
• There is water or fat stains on the control panel. Clean the control
panel
• The child safety device or key lock or
operates . See the
chapter Operating the appliance.
• Start the appliance again and set the heat setting in 10 seconds.
A sound operates (6x) and the
appliance stops or a sound operates when the appliance is off.
You covered one or more sensor fields. Uncover the sensor fields.
The residual heat indicator does
not come on.
The cooking zone is not hot because it operated only for a short
time. If the cooking zone is supposed to be hot, speak to the After
Sales Service.
A sound operates and appliance
starts and stops again. After 5
seconds one more sound operates.
You covered
Heat setting alternates
The Power management is active. See the section Power management.
. Uncover the sensor field.
comes on
• No cookware on the cooking zone. Put cookware on the cooking zone.
• Not correct cookware. Use the correct cookware.
• The diameter of the bottom of the cookware is too small for the
cooking zone. Move cookware to a smaller cooking zone.
• The automatic switch-off operates. Stop the appliance and start
it again.
• Overheating protection for the cooking zone operates. Switch
off the cooking zone. Switch on the cooking zone again.
and number come on.
There is an error in the appliance.
Disconnect the appliance from the electrical supply for some time.
Disconnect the fuse from the electrical system of the house. Connect again. If
comes on again, speak to the after sales service.
comes on
There is an error in the appliance, because a cookware boils dry
or you use not correct cookware. Overheating protection for the
cooking zone operates. The automatic switch-off operates.
Switch off the appliance. Remove the hot cookware. After approximately 30 seconds switch on the cooking zone again.
should
disappear, residual heat indicator can stay. Cool down the cookware and check it with the section "Cookware for the induction
cooking zone".
If you tried the above solutions and cannot
repair the problem, speak to your dealer or
the Customer Care Department. Give the da-
ta from the rating plate, three-digit-letter
code for the glass ceramic (it is in the corner
electrolux 11
of the cooking surface) and an error message
that comes on.
If you operated the appliance incorrectly, the
servicing by a customer service technician or
Environment concerns
The symbol
on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for
the environment and human health, which
could otherwise be caused by inappropriate
waste handling of this product. For more
detailed information about recycling of this
product, please contact your local council,
your household waste disposal service or the
shop where you purchased the product.
Packaging material
The packaging materials are friendly to
the environment and can be recycled.
The plastic components are identified by
marking: >PE<,>PS<, etc. Discard the
packaging materials as household
waste at the waste disposal facilities in
your municipality.
dealer will not be free of charge, even during
the warranty period. The instructions about
the customer service and conditions of guarantee are in the guarantee booklet.
www.electrolux.com
www.electrolux.com.au
www.electrolux.co.nz
892930879-A-052009

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement