Aeg-Electrolux | 96931KFE-N | User manual | Aeg-Electrolux 96931KFE-N User Manual

96931KFE-N
User manual
Ceramic glass hob
2
Contents
Thank you for choosing one of our high-quality products.
To ensure optimal and regular performance of your appliance please read this
instruction manual carefully. It will enable you to navigate all processes perfectly
and most efficiently. To refer to this manual any time you need to, we recommend
you to keep it in a safe place. And please pass it to any future owner of the appliance.
We wish you much joy with your new appliance.
Contents
Operating Instructions
2
What to do if...
14
Safety instructions
Description of the appliance
2
4
Disposal
Installation Instructions
15
15
Safety information
Service
15
17
Operating the appliance
Tips on cooking and frying
6
12
Cleaning and care
13
Subject to change without notice
Operating Instructions
Safety instructions
WARNING!
Please comply with these instructions. If you do not, any damage resulting is not covered
by the warranty.
Correct use
• This appliance is not intended for use by children or other persons whose physical, sensory
or mental capabilities or lack of experience and knowledge prevents them from using
the appliance safely without supervision or instruction by a responsible person to ensure
that they can use the appliance safely.
• Do not leave the appliance unattended during operation.
• This appliance should be used only for normal domestic cooking and frying of food.
• The appliance must not be used as a work surface or as a storage surface
• Additions or modifications to the appliance are not permitted.
• Do not place or store flammable liquids, highly inflammable materials or fusible objects
(e.g. plastic film, plastic, aluminium) on or near the appliance.
Children’s safety
• Small children must be kept away from the appliance.
• Only let bigger children work on the appliance under supervision.
Safety instructions
3
• To avoid small children and pets unintentionally switching the appliance on, we recommend activation of the child safety device.
General safety
• The appliance may only be installed and connected by trained, registered service engineers.
• Built-in appliances may only be used after they have built in to suitable built-in units
and work surfaces that meet standards.
• In the event of faults with the appliance or damage to the glass ceramic (cracks, scratches
or splits), the appliance must be switched off and disconnected from the electrical supply,
to prevent the possibility of an electric shock.
• Repairs to the appliance must only be carried out by trained registered service engineers.
Safety during use
• Overheated fats and oils can ignite very quickly. Warning! Fire hazard!
• There is the risk of burns from the appliance if used carelessly.
• Remove stickers and film from the glass ceramic.
• Cables from electrical appliances must not touch the hot surface of the appliance or hot
cookware.
• Switch the cooking zones off after each use.
• Risk of burns! Do not place objects made of metal, such as knives, forks, spoons and
saucepan lids on the cooking surface, as they can get hot.
Safety when cleaning
• For cleaning, the appliance must be switched off and cooled down.
• For safety reasons, the cleaning of the appliance with steam jet or highpressure cleaning
equipment is not permitted.
How to avoid damage to the appliance
• The glass ceramic can be damaged by objects falling onto it.
• The edge of the glass ceramic can be damaged by being knocked by the cookware.
• Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the
glass ceramic if pushed across the surface.
• Objects that melt and things that boil over can burn onto the glass ceramic and should
be removed straightaway.
• To avoid damaging cookware and glass ceramics, do not allow saucepans or frying pans
to boil dry.
• Do not use the cooking zones with empty cookware or without cookware.
4
Description of the appliance
Description of the appliance
Cooking surface layout
1
2
0
3
18
170x265
0
27
0/
21
5/
14
0
5
18
14
6
1
2
3
4
5
6
5
4
Single cooking zone 1800W
Triple ring zone 1050/1950/2700W
Multi-purpose zone 1400/2200W
Single cooking zone 1800W
Control panel
Single zone 1200W
Control panel layout
1
2
3
4
5
11
1
2
3
4
5
6
7
8
9
10
11
6
7
10
Child lock with a pilot light
Stop+Go with a pilot light
Automatic warm-up function
Cooking zone indicators Timer function
Timer display
Timer
Multi-purpose zone with pilot lights
Heat setting indicator
Heat setting selection
Triple ring zone with pilot lights
On/Off with indicator
9
8
Description of the appliance
5
Touch Control sensor fields
The appliance is operated using Touch Control sensor fields. Functions are controlled by
touching sensor fields and confirmed by displays and acoustic signals. Only touch the sensor
fields which activate a desired function. Do not cover other sensor fields.
If the control bar is touched for longer than 6 seconds, a signal sounds and the appliance
switches itself off.
Sensor field
Function
On / Off
Switches appliance on and off
Child lock
Locking control panel for children
Triple ring
To switch outer rings on and off
Multi-purpose
zone
To switch outer rings on and off
STOP+GO
To switch the Keep Warm setting on/ off
Automatic warmup
To switch the automatic warm-up function on and off
Timer
Timer selection
Increase settings
To increase Timer time
Reduce settings
To reduce Timer time
Control bar
The control bar is a special Touch Control field. The
control bar is touched where the desired heat setting is positioned. The heat setting is shown in the
display. Correct to the left or the right, if necessary. Do not release before the desired heat setting
is reached.
A
If the control bar is touched for longer than 6
seconds, a signal sounds and the appliance
switches itself off.
Displays
Display
Description
The cooking zone is switched off
/
Keep Warm settings
Keep Warm / STOP+GO function is switched on
-
Heat settings
To set heat settings
Automatic Warm-up
The Automatic Warm-up function is switched on
Fault
Malfunction has occurred
Residual heat
Cooking zone is still hot
6
Operating the appliance
Display
Description
Child safety device
Lock/Child safety device is set
Automatic Switch off
Switch off is active
Residual heat indicator
The residual heat indicator lights up, as soon as one cooking zone is hot.
WARNING!
Risk of burns from residual heat! After you switch the appliance off, the cooking zones
need some time to cool down. Look at the residual heat indicator.
Use residual heat for melting and keeping food warm.
Operating the appliance
Switching the appliance on and off
Control panel
Display
Pilot light
Switch on
Touch
for 1 second
/
lights up.
Switch off
Touch
for 1 second
/ none
goes out.
After switching on, within approx. 10 seconds a heat setting or a function must be set,
otherwise the appliance automatically switches itself off.
Setting the heat setting
Control panel
Display
To set the heat
setting
Touch the desired heat setting, if necessary, correct
up or down
Switch off
Touch
/
to
Switching the outside ring on and off
By switching the outside rings on or off, the effective heating surface can be matched to
the size of the cookware.
Before an outside ring can be switched on, the inside ring must be switched on
Triple cooking zone
Sensor panel
Pilot light
To switch on the central ring
Touch
for 1-2 seconds.
Second pilot light lights up
To switch on the outside ring
Touch
for 1-2 seconds.
Third pilot light lights up
To switch off the outside ring
Touch
for 1-2 seconds.
Third pilot light goes out
To switch off the central ring
Touch
for 1-2 seconds.
Second pilot light goes out
Operating the appliance
Multi-purpose zone
Sensor field
7
Pilot light
To switch on outside ring
Touch
for 1-2 seconds
Second pilot light lights up
To switch off outside ring
Touch
for 1-2 seconds
Pilot light goes out
Locking/unlocking the control panel
The control panel, with the exception of the “On/Off” sensor field, can be locked at any time
in order to prevent the settings being changed e.g. by wiping over the panel with a cloth.
Control panel
To switch on
Touch
To switch off
Touch
Display
(for 4 seconds)
previously set heat setting
When you switch the appliance off, the locking function is automatically switched off.
Turning the STOP+GO function on and off
The STOP+GO function simultaneously toggles all active cooking zones to keep-warm mode
then back to the heat setting they were at before
Control panel
To switch on
Touch
To switch off
Touch
Display
Previous heat setting (not automatic warm-up or power
function)
STOP+GO does not stop timer functions.
STOP+GO controls the entire control panel apart from the sensor field
.
Using the automatic warm-up function
All cooking zones are equipped with an automatic warm-up function. When setting a heat
setting using the automatic warm-up function, the cooking zone switches to full power
for a certain amount of time and then automatically switches back to the heat setting set.
Control Panel
Display
1.
Step
Touch
2.
Move your finger down
from
to select the desired heat setting between
and
/
after 5 seconds
. As long as
is
displayed, the appliance works at full power. After
the automatic warm up is completed, the heat
setting
/
is displayed again.
The length of time that the automatic warm up function operates depends on the heat
setting selected.
Heat setting
Length of the automatic warm up [min:sec]
1:00
8
Operating the appliance
Heat setting
Length of the automatic warm up [min:sec]
1:40
2:40
4:50
5:30
6:30
8:10
10:10
12:20
2:30
2:30
3:30
4:30
---
Using the child safety device
The child safety device prevents unintentional use of the appliance.
Switching on the child safety device
Step
1.
2.
Control panel
Display/Signal
Switch on appliance. Do not set a heat setting.
Touch
for 4 seconds
The child safety device is switched on.
Switching off the child safety device
Step
1.
2.
3.
Control panel
Display/Signal
Switch on appliance. Do not set a heat setting.
Touch
for 4 seconds
lights up
Switch appliance off.
The child safety device is switched off.
The child safety device can only be switched on and off if no heat setting is set.
Overriding the child safety device
The child safety device can be switched off in this way for a single cooking session; it remains
activated afterwards.
Operating the appliance
Step
Control panel
1.
2.
9
Display/Signal
Switch appliance on
Touch
for 4 seconds
lights up
Until the appliance is next switched off, it can used as normal. After switching off the appliance,
the child safety device is active again.
After overriding the child safety device, a heat setting or a function must be set within
approx. 10 seconds, otherwise the appliance automatically switches itself off.
Using the timer
Function
Condition
Outcome after the time has
elapsed
Automatic cut-out
a heat setting is set
acoustic signal
00 flashes
Cooking zone switches off
Countdown timer
cooking zones not in use
acoustic signal
00 flashes
If just one countdown value is set you can change it only when the appliance is switched
on.
If a heat setting is set on this cooking zone in addition to a countdown timer, the cooking
zone is switched off after the time set has elapsed.
If a cooking zone is switched off, the timer function set is also switched off.
Selecting a cooking zone
Step
Control panel
Display
1.
Touch
once
Pilot light of the first cooking zone flashes
2.
Touch
once
Pilot light of the second cooking zone flashes
3.
Touch
once
Pilot light of the third cooking zone flashes
4.
Touch
once
Pilot light of the fourth cooking zone flashes
5.
Touch
once
Pilot light of the fifth cooking zone flashes
If other timer functions are set, after a few seconds the shortest remaining time of all the
timer functions is displayed and the corresponding pilot light flashes.
10
Operating the appliance
Setting the time
Step
Control panel
1.
Select
2.
Touch or
cooking zone
Display
Pilot light for the cooking zone selected
flashes
00 to 99 minutes
/
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Switching off the timer function
Step
Control panel
1.
Select
2.
Touch
cooking zone
Display
Pilot light of cooking zone selected flashes faster
Time remaining is displayed
The time remaining counts backwards to 00 .
The pilot light goes out.
The Timer function for the selected cooking zone is switched off.
Changing the time
Step
1.
2.
Control panel
Selecting a cooking zone
Touch
or
Display
Pilot light of the selected cooking zone
flashes more quickly
Remaining time is displayed
01 to 99 minutes
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Displaying the time remaining for a cooking zone
Step
1.
Control panel field
Select cooking zone
Display
Pilot light of the cooking zone selected flashes faster
The time remaining is displayed
After a few seconds the pilot light flashes more slowly.
Switching off the acoustic signal
Step
1.
Control panel field
Touch
Acoustic signal
Acoustic signal to acknowledge.
Acoustic signal stops.
Automatic switch off
Cooking surface
• If after switching on the cooking surface, a heat setting is not set for a cooking zone
within approx. 10 seconds, the cooking surface automatically switches itself off.
• If one or more sensor fields are covered by objects (a pan, etc.) for longer than approx.
10 seconds, a signal sounds and the cooking surface switches off automatically.
Operating the appliance
11
• If all cooking zones are switched off, the cooking surface automatically switches itself
off after approx. 10 seconds.
Control panel
• When the appliance is switched off, if one or more of the sensor fields on the control
panel are covered for more than 10 seconds, an acoustic signal sounds. The acoustic
signal switches itself off automatically when the sensor fields are no longer covered.
Cooking zones
• If one of the cooking zones is not switched off after a certain time, or if the heat setting
is not modified, the relevant cooking zone switches off automatically. is displayed.
Before being used again, the cooking zone must be set to .
Heat setting
Switches off after
-
6 hours
-
5 hours
-
4 hours
-
1.5 hours
Power Management
The three cooking zones (marked in the picture)
together have a maximum possible power available to them.
If it looks like the maximum power of all three
cooking zones is going to be exceeded, for example by turning on an additional cooking zone or
by turning up a heat setting, the Power Management automatically reduces the power of another
cooking zone. The power of the cooking zone that has been switched on for the longest
time is reduced. For two minutes the indicator for this cooking zone changes between the
previously set heat setting and the maximum possible heat setting at this time. After one
minute the actual heat setting is displayed.
The following table shows the distribution of the maximum possible heat setting when all
three cookning zones are on at the same time.
First cooking zone
Second cooking zone
Third cooking zone
14
14
-
14
13
1 - 11
14
12
12
13
13
13
12
Tips on cooking and frying
Tips on cooking and frying
Information about acrylamides
According to the latest scientific research, intensive browning of food, especially in products
containing starch, may present a health risk due to acrylamide. Therefore we recommend
cooking at low temperatures and not browning foods too much.
Cookware
• You can recognise good cookware from the bottoms of the pans. The bottom should be
as thick and flat as possible.
• Cookware made of enamelled steel or with aluminium or copper bottoms can leave
discolorations on the glass ceramic surface which are difficult or impossible to remove.
Energy saving
Always place cookware on the cooking zone before it is switched on.
If possible, always place lids on the pans.
Switch cooking zones off before the end of the cooking time, to take advantage of residual
heat.
Bottom of pans and cooking zones should be the same size.
Examples of cooking applications
The information given in the following table is for guidance only.
Heat setting
0
Cooking process
suitable for
Cook time
Tips/Hints
Off position
1
Keeping food warm Keeping cooked
foods warm
as required
Cover
Cleaning and care
Heat setting
Cooking process
suitable for
Cook time
13
Tips/Hints
1-3
Melting
Hollandaise sauce,
melting butter,
chocolate, gelatine
5-25 mins.
Stir occasionally
1-3
Solidifying
Fluffy omelettes,
baked eggs
10-40 mins.
Cook with lid on
3-5
Simmering
Simmering rice and 25-50 mins.
milkbased dishes
Heating up readycooked meals
Add at least twice
as much liquid as
rice, stir milk dishes
part way through
cooking
5-7
Steaming
Braising
Steaming vegetables, fish Braising
meat
20-45 mins.
With vegetables
add only a little liquid (a few tablespoons)
7-9
Boiling
Steaming potatoes
20-60 mins.
Use only a little liquid, e. g.: max. ¼ l
water for 750 g of
potatoes
7-9
Boiling
Cooking larger
quantities of food,
stews and soups
60-150 mins.
Up to 3 l liquid plus
ingredients
9-12
Gentle frying
Frying escalope,
veal cordon bleu,
cutlets, rissoles,
sausages, liver,
roux, eggs, pancakes, doughnuts
as required
Turn halfway
through cooking
12-13
Heavy frying
Hash browns, loin
steaks, steaks, Flädle (pancakes for
garnishing soup)
5-15 mins. per pan Turn halfway
through cooking
14
Boiling Searing
Deep frying
Boiling large quantities of water, cooking pasta, searing meat
(goulash, pot roast), deep frying chips
Cleaning and care
WARNING!
Sharp objects and abrasive cleaning agents will damage the appliance. Clean the appliance
and remove the residues with water and washing up liquid after each use. Remove also the
remnants of the cleaning agents!
Scratches or dark stains on the glass ceramic that cannot be removed do not affect the
functioning of the appliance.
14
What to do if...
Cleaning the appliance after each use
1. Food containing sugar, plastics, tin foil residues should be removed at once using a
scraper. Place a scraper on the glass ceramic surface at an angle and remove residues
by sliding the blade over the surface. Wipe the appliance with a damp cloth and a little
washing up liquid. Finally, rub the appliance dry using a clean cloth .
2. Limescale rings, water rings, fat splashes, shiny metallic discolorations should be removed after the appliance has cooled down using cleaner for glass ceramic or stainless
steel.
What to do if...
Problem
The cooking zones will not
switch on or are not functioning
Possible cause
Remedy
More than 10 seconds have
Switch the appliance on again.
passed since the appliance was
switched on
The child safety device is
switched on
Deactivate child safety device
(See the section “Child safety
device”)
Several sensor fields were
touched at the same time
Only touch one sensor field
Automatic switch off has been Remove any objects (pan,
triggered
cloths, etc.) that are lying on
the control panel. Switch the
appliance on again
There is water on the control
panel, or the control panel is
covered with splashes
is active -
Wipe the control panel
Switch off
Acoustic signal sounds when
appliance is switched off
The control panel is wholly or
partly covered by objects.
Remove objects.
The residual heat indicator is
not displaying anything
The cooking zone was only on If the cooking zone is supposed
for a short time and is therefore to be hot, call the Customer
not hot
Service Department.
The automatic warm up function is not switching itself on
There is still residual heat on
the cooking zone
Let the cooking zone cool down
The highest heat setting is set
The highest heat setting has
the same power as the automatic warm up function
Acoustic signal sounds and ap- The On/Off sensor field has
Do not place any objects on the
pliance switches itself on and been covered up, e.g. by a cloth control panel
then off again; after 5 seconds
another acoustic signal sounds
Disposal
Problem
Possible cause
15
Remedy
is lit
Overheating protection for the Switch off the cooking zone.
cooking zone has been trigSwitch the cooking zone on
gered
again
and number are displayed
Electronics fault
Disconnect the appliance from
the electrical supply for a few
minutes (Take the fuse out of
the house’s wiring system) If
after switching on again, is
displayed again, call the customer service department
If you are unable to remedy the problem by following the above suggestions, please
contact your dealer or the Customer Care Department.
WARNING!
Repairs to the appliance are only to be carried out by qualified service engineers. Considerable danger to the user may result from improper repairs.
If the appliance has been wrongly operated, the visit from the customer service technician
or dealer may not take place free of charge, even during the warranty period.
Disposal
The symbol
on the product or on its packaging indicates that this product may not be
treated as household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product is disposed
of correctly, you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this product, please contact
your local council, your household waste disposal service or the shop where you purchased
the product.
The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging
materials in the appropriate container at your local waste disposal facilities.
Installation Instructions
Safety information
Safety instructions
WARNING!
This must be read!
16
Safety information
The laws, ordinances, directives and standards in force in the country of use are to be
followed (safety regulations, proper recycling in accordance with the regulations, etc.)
Installation may only be carried out by a qualified electrician. The minimum distances to
other appliances and units are to be observed.
Anti-shock protection must be provided by the installation, for example drawers may only
be installed with a protective floor directly underneath the appliance. The cut surfaces of
the worktop are to be protected against moisture using a suitable sealant.
The sealant seals the appliance to the work top with no gap. When building in, protect the
underside of the appliance from steam and moisture, e.g. from a dishwasher or oven.
Avoid installing the appliance next to doors and under windows. Otherwise hot cookware
may be knocked off the rings when doors and windows are opened.
WARNING!
Risk of injury from electrical current.
•
•
•
•
•
•
•
•
•
•
The electrical mains terminal is live.
Make electrical mains terminal free of voltage.
Follow connection schematic.
Observe electrical safety rules.
Ensure anti-shock protection by installing correctly.
The appliance must be connected to the electrical supply by a qualified electrician.
Loose and inappropriate plug and socket connections can make the terminal overheat.
Have the clamping connections correctly installed by a qualified electrician.
Use strain relief clamp on cable.
In the event of single-phase or two-phase connection, the appropriate mains cable of
type H05BB-F Tmax 90°C (or higher) must be used.
• If this appliance’s mains cable is damaged, it must be replaced by a special cable (type
H05BB-F Tmax 90°C; or higher). Please contact your local Service Force Center for further
advice.
A device must be provided in the electrical installation which allows the appliance to be
disconnected from the mains at all poles with a contact opening width of at least 3 mm
Suitable isolation devices include line protecting cut-outs, fuses (screw type fuses are to
be removed from the holder), earth leakage trips and contactors.
Sticking on the seal
• Clean the worktop in the area of the cut-out section.
• Stick the one-sided self-adhesive sealing tape supplied all the way round the lower edge
of the cooking surface along the outer edge of the glass ceramic panel. Do not stretch
it. The cut ends should lie in the middle of one side. When you have cut it to length (add
a few mm), press the two ends flush up against one another.
Assembly
min.
50 mm
17
Service
1
2
490
795
672
Rating Plate
Modell 96931KFE-N
Prod. Nr. 949 593 136
Typ 55 HGD AA AO 230 V, 50 Hz
7,9 kW
AEG-ELECTROLUX
Service
In the event of technical faults, please first check whether you can remedy the problem
yourself with the help of the operating instructions (section “What to do if…”).
If you were not able to remedy the problem yourself, please contact the Customer Care
Department or one of our service partners.
In order to be able to assist you quickly, we require the following information:
– Three-digit-letter combination
for glass ceramic
– Model description
– Product number (PNC)
18
– Serial number
(S No. - see rating plate)
– Type of fault
– Any error messages displayed by
the appliance
19
www.electrolux.com
892930389-C-082008
www.aeg-electrolux.de
Download PDF

advertising