AEG | HK874400FB | User manual | Aeg HK874400FB User Manual

Aeg HK874400FB User Manual
EN
User Manual
Hob
HK874400FB
2
www.aeg.com
CONTENTS
1. SAFETY INFORMATION.................................................................................................3
2. SAFETY INSTRUCTIONS................................................................................................ 4
3. PRODUCT DESCRIPTION.............................................................................................. 6
4. DAILY USE........................................................................................................................8
5. HINTS AND TIPS........................................................................................................... 11
6. CARE AND CLEANING................................................................................................ 13
7. TROUBLESHOOTING...................................................................................................13
8. INSTALLATION............................................................................................................. 16
9. TECHNICAL INFORMATION....................................................................................... 18
10. ENERGY EFFICIENCY.................................................................................................19
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable
performance for many years, with innovative technologies that help make life simpler
features you might not find on ordinary appliances. Please spend a few minutes
reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following
data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
ENGLISH
1.
3
SAFETY INFORMATION
Before the installation and use of the appliance,
carefully read the supplied instructions. The
manufacturer is not responsible if an incorrect
installation and use causes injuries and damages. Always
keep the instructions with the appliance for future
reference.
1.1 Children and vulnerable people safety
•
•
•
•
•
•
•
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved.
Do not let children play with the appliance.
Keep all packaging away from children.
Keep children and pets away from the appliance when
it operates or when it cools down. Accessible parts are
hot.
If the appliance has a child safety device, we
recommend you activate it.
Cleaning and user maintenance shall not be made by
children without supervision.
Children of less than 3 years should be kept away
unless continuously supervised.
1.2 General Safety
•
•
•
•
The appliance and its accessible parts become hot
during use. Do not touch the heating elements.
Do not operate the appliance by means of an external
timer or separate remote-control system.
Unattended cooking on a hob with fat or oil can be
dangerous and may result in fire.
Never try to extinguish a fire with water, but switch off
the appliance and then cover flame e.g. with a lid or a
fire blanket.
4
www.aeg.com
•
•
•
•
•
•
Do not store items on the cooking surfaces.
Metallic objects such as knives, forks, spoons and lids
should not be placed on the hob surface since they
can get hot.
Do not use a steam cleaner to clean the appliance.
After use, switch off the hob element by its control
and do not rely on the pan detector.
If the glass ceramic surface / glass surface is cracked,
switch off the appliance to avoid the possibility of
electric shock.
If the supply cord is damaged, it must be replaced by
the manufacturer, an authorized Service or similarly
qualified persons in order to avoid a hazard.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Obey the installation instruction
supplied with the appliance.
• Keep the minimum distance from the
other appliances and units.
• Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
• Seal the cut surfaces with a sealant to
prevent moisture to cause swelling.
• Protect the bottom of the appliance
from steam and moisture.
• Do not install the appliance adjacent
to a door or under a window. This
prevents hot cookware to fall from the
appliance when the door or the
window is opened.
• If the appliance is installed above
drawers make sure that the space,
between the bottom of the appliance
and the upper drawer, is sufficient for
air circulation.
• The bottom of the appliance can get
hot. Make sure to install a noncombustile separation panel under
the appliance to prevent access to the
bottom.
• Make sure that the ventilation space
of 2 mm, between the worktop and
the front of the below unit, is free.
The warranty does not cover damages
caused by the lack of an adequate
ventilation space.
2.2 Electrical Connection
WARNING!
Risk of fire and electrical
shock.
• All electrical connections should be
made by a qualified electrician.
• The appliance must be earthed.
• Before carrying out any operation
make sure that the appliance is
disconnected from the power supply.
• Make sure that the electrical
information on the rating plate agrees
with the power supply. If not, contact
an electrician.
• Make sure the appliance is installed
correctly. Loose and incorrect
electricity mains cable or plug (if
applicable) can make the terminal
become too hot.
• Use the correct electricity mains
cable.
• Do not let the electricity mains cable
tangle.
ENGLISH
• Make sure that a shock protection is
installed.
• Use the strain relief clamp on the
cable.
• Make sure the mains cable or plug (if
applicable) does not touch the hot
appliance or hot cookware, when you
connect the appliance to the near
sockets
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to
the mains plug (if applicable) or to the
mains cable. Contact our Authorised
Service Centre or an electrician to
change a damaged mains cable.
• The shock protection of live and
insulated parts must be fastened in
such a way that it cannot be removed
without tools.
• Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
• If the mains socket is loose, do not
connect the mains plug.
• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
• The electrical installation must have
an isolation device which lets you
disconnect the appliance from the
mains at all poles. The isolation
device must have a contact opening
width of minimum 3 mm.
2.3 Use
WARNING!
Risk of injury, burns and
electrical shock.
• Remove all the packaging, labelling
and protective film (if applicable)
before first use.
• Use this appliance in a household
environment.
• Do not change the specification of
this appliance.
• Make sure that the ventilation
openings are not blocked.
5
• Do not let the appliance stay
unattended during operation.
• Set the cooking zone to “off” after
each use.
• Do not rely on the pan detector.
• Do not put cutlery or saucepan lids on
the cooking zones. They can become
hot.
• Do not operate the appliance with
wet hands or when it has contact with
water.
• Do not use the appliance as a work
surface or as a storage surface.
• If the surface of the appliance is
cracked, disconnect immediately the
appliance from the power supply. This
to prevent an electrical shock.
• Users with a pacemaker must keep a
distance of minimum 30 cm from the
induction cooking zones when the
appliance is in operation.
• When you place food into hot oil, it
may splash.
WARNING!
Risk of fire and explosion
• Fats and oil when heated can release
flammable vapours. Keep flames or
heated objects away from fats and oils
when you cook with them.
• The vapours that very hot oil releases
can cause spontaneous combustion.
• Used oil, that can contain food
remnants, can cause fire at a lower
temperature than oil used for the first
time.
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
WARNING!
Risk of damage to the
appliance.
• Do not keep hot cookware on the
control panel.
• Do not let cookware to boil dry.
• Be careful not to let objects or
cookware fall on the appliance. The
surface can be damaged.
• Do not activate the cooking zones
with empty cookware or without
cookware.
• Do not put aluminium foil on the
appliance.
6
www.aeg.com
• Cookware made of cast iron,
aluminium or with a damaged bottom
can cause scratches on the glass /
glass ceramic. Always lift these
objects up when you have to move
them on the cooking surface.
• This appliance is for cooking
purposes only. It must not be used for
other purposes, for example room
heating.
2.4 Care and cleaning
• Clean regularly the appliance to
prevent the deterioration of the
surface material.
• Deactivate the appliance and let it
cool down before you clean it.
• Disconnect the appliance from the
electrical supply before maintenance.
• Do not use water spray and steam to
clean the appliance.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal
objects.
2.5 Disposal
WARNING!
Risk of injury or suffocation.
• Contact your municipal authority for
information on how to discard the
appliance correctly.
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and discard it.
2.6 Service
• To repair the appliance contact an
Authorised Service Centre.
• Use original spare parts only.
3. PRODUCT DESCRIPTION
3.1 Cooking surface layout
1
1
1
2
1 Induction cooking zone
2 Control panel
1
ENGLISH
7
3.2 Control panel layout
1
2
3
10
11
5
4
6
9 8 7
To see the control panel activate the appliance with
.
Use the sensor fields to operate the appliance. The displays, indicators and sounds tell
which functions operate.
Sensor Function
field
Comment
STOP+GO
To activate and deactivate the function.
-
Heat setting display
To show the heat setting.
-
Timer indicators of cooking To show for which zone you set the time.
zones
-
Timer display
To show the time in minutes.
5
Grill Function
To activate and deactivate the function.
6
Lock / The Child Safety De- To lock / unlock the control panel.
vice
7
-
To select the cooking zone.
-
To increase or decrease the time.
ON / OFF
To activate and deactivate the hob.
Control bar
To set a heat setting.
Power function
To activate and deactivate the function.
1
2
3
4
/
8
9
10
11
-
3.3 Heat setting displays
Display
Description
The cooking zone is deactivated.
-
The cooking zone operates.
8
www.aeg.com
Display
Description
STOP+GO function operates.
Automatic Heat Up function operates.
Power function operates.
+ digit
There is a malfunction.
/
OptiHeat Control (3 step Residual heat indicator): continue cooking /
keep warm / residual heat.
/
Lock / The Child Safety Device function operates.
Incorrect or too small cookware or no cookware on the cooking zone.
Automatic Switch Off function operates.
3.4 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/
/
There is a risk of
burns from residual heat.
The indicator shows the level
of the residual heat.
The induction cooking zones make the
heat necessary for cooking process
directly in the bottom of the cookware.
The glass ceramic is heated by the heat
of the cookware.
4. DAILY USE
WARNING!
Refer to Safety chapters.
4.1 Activating and
deactivating
Touch
for 1 second to activate or
deactivate the hob.
The control panel comes on after you
activate the hob and goes off after you
deactivate the hob. When the hob is
deactivated you can see only
field.
sensor
4.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after
you activate the hob,
• you spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or
clean the control panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
• you use incorrect cookware. The
symbol
comes on and the cooking
zone deactivates automatically after 2
minutes.
• you do not deactivate a cooking zone
or change the heat setting. After
some time
deactivates.
comes on and the hob
ENGLISH
The relation between the heat setting
and the time after which the hob
deactivates:
Heat setting
,1-3
The hob deactivates after
6 hours
4-7
5 hours
8-9
4 hours
10 - 14
1.5 hour
4.3 The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat
setting or move your finger along the
control bar until you reach the correct
heat setting.
9
This function connects two right side
cooking zones under the accessory and
they operate as one.
First set the heat setting for one of the
right side cooking zones.
To activate the function: touch . To
set or change the heat setting touch one
of the right control sensors.
To deactivate the function: touch
The cooking zones operate
independently.
.
4.6 Automatic Heat Up
If you activate this function you can get a
necessary heat setting in a shorter time.
The function sets the highest heat setting
for some time and then decreases to the
correct heat setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
( comes on).
zone: touch
Immediately touch the correct heat
setting. After 5 seconds
comes on.
To deactivate the function: change the
heat setting.
4.7 Power function
4.4 Using the cooking zones
Put the cookware on the cross / square
which is on the surface that you cook.
Cover the cross / square fully. Induction
cooking zones adapt to the dimension of
the bottom of the cookware
automatically. You can cook with the
large cookware on two cooking zones at
the same time.
4.5 Grill Function
Use this function with the
Maxisense Plancha Grill1)
accessory.
This function makes more power
available to the induction cooking zones.
The function can be activated for the
induction cooking zone only for a limited
period of time. After this time the
induction cooking zone automatically
sets back to the highest heat setting.
Refer to “Technical
information” chapter.
To activate the function for a cooking
zone: touch
.
comes on.
To deactivate the function: change the
heat setting.
1) The accessory is not supplied with the appliance. For more information, please contact your local
supplier.
10
www.aeg.com
4.8 Timer
Count Down Timer
You can use this function to set how long
the cooking zone should operate for a
single cooking session.
First set the cooking zone then set the
function. You can set the heat setting
before or after you set the function.
To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
or
. The indicator of the cooking zone
goes out.
Minute Minder
You can use this function as a Minute
Minder when the hob is activated and
the cooking zones do not operate (the
To stop the sound: touch
).
.
.
The function has no effect
on the operation of the
cooking zones.
To change the time: set the cooking
.
4.9 STOP+GO
To deactivate the function: set the
cooking zone with
and touch . The
remaining time counts back to 00. The
indicator of the cooking zone goes out.
When the time comes to an
end, the sound operates and
00 flashes. The cooking
zone deactivates.
To stop the sound: touch
and touch
or
of the timer to set the
Touch
time. When the time comes to an end,
the sound operates and 00 flashes.
cooking zone with . The indicator of
the cooking zone starts to flash quickly.
The display shows the remaining time.
or
cooking zone with
To activate the function: touch
To see the remaining time: set the
. Touch
To deactivate the function: set the
heat setting display shows
To activate the function: touch
of
the timer to set the time (00 - 99
minutes). When the indicator of the
cooking zone starts to flash slowly the
time counts down.
zone with
The indicator of the cooking zone starts
to flash quickly. The display shows how
long the zone operates.
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, you cannot
change the heat setting.
The function does not stop the timer
functions.
To activate the function: touch
comes on.
.
CountUp Timer (The count up timer)
You can use this function to monitor how
long the cooking zone operates.
.
To deactivate the function: touch .
The previous heat setting comes on.
4.10 Lock
To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
You can lock the control panel while
cooking zones operate. It prevents an
accidental change of the heat setting.
To activate the function: touch
Set the heat setting first.
of
the timer.
comes on. When the
indicator of the cooking zone starts to
flash slowly the time counts up. The
display switches between
counted time (minutes).
To activate the function: touch .
comes on for 4 seconds. The Timer stays
on.
and
To deactivate the function: touch .
The previous heat setting comes on.
To see how long the cooking zone
operates: set the cooking zone with
.
ENGLISH
When the function is set to
hear the sounds only when:
When you deactivate the
hob, you also deactivate this
function.
•
•
•
•
4.11 The Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: activate the
. Do not set the heat setting.
hob with
Touch
for 4 seconds.
Deactivate the hob with
comes on.
.
To deactivate the function: activate the
. Do not set the heat setting.
hob with
Touch
for 4 seconds.
Deactivate the hob with
comes on.
.
To override the function for only one
cooking time: activate the hob with
.
comes on. Touch
for 4 seconds.
Set the heat setting in 10 seconds. You
can operate the hob. When you
deactivate the hob with
operates again.
the function
4.12 OffSound Control
(Deactivation and activation of
the sounds)
you can
you touch
Minute Minder comes down
Count Down Timer comes down
you put something on the control
panel.
4.13 Power management
function
• Cooking zones are grouped
according to the location and number
of the phases in the hob. See the
illustration.
• Each phase has a maximum electricity
loading of 3700 W.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking
zones connected to a single phase
exceeds 3700 W.
• The function decreases the power to
the other cooking zones connected to
the same phase.
• The heat setting display of the
reduced zones changes between two
levels.
Deactivate the hob. Touch
for 3
seconds. The display comes on and goes
out. Touch
for 3 seconds.
or
comes on. Touch
of the timer to
choose one of the following:
•
- the sounds are off
•
- the sounds are on
To confirm your selection wait until the
hob deactivates automatically.
5. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
11
5.1 Cookware
For induction cooking zones
a strong electro-magnetic
field creates the heat in the
cookware very quickly.
12
www.aeg.com
Use the induction cooking
zones with correct cookware.
Cookware material
• correct: cast iron, steel, enamelled
steel, stainless steel, the bottom
made of multi-layer (with correct mark
from a manufacturer).
• not correct: aluminium, copper,
brass, glass, ceramic, porcelain.
Cookware is correct for an induction
hob if:
• some water boils very quickly on a
zone set to the highest heat setting.
• a magnet pulls on to the bottom of
the cookware.
The bottom of the cookware
must be as thick and flat as
possible.
Cookware dimensions
Induction cooking zones adapt to the
dimension of the bottom of the
cookware automatically to some limit.
The cooking zone efficiency is related to
the diameter of the cookware. The
cookware with a smaller diameter than
the minimum receives only a part of the
power generated by the cooking zone.
Refer to “Technical
information” chapter.
• crack noise: cookware is made of
different materials (sandwich
construction).
• whistle sound: you the cooking zone
with high power level and the
cookware is made of different
materials (sandwich construction).
• humming: you use high power level.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer
to hob malfunction.
5.3 Öko Timer (Eco Timer)
To save energy, the heater of the
cooking zone deactivates before the
count down timer sounds. The difference
in the operation time depends on the
heat setting level and the length of the
cooking operation.
5.4 Examples of cooking
applications
The relation between the heat setting
and the cooking zone consumption of
power is not linear. When you increase
the heat setting, it is not proportional to
the increase of the cooking zone
consumption of power. It means that the
cooking zone with the medium heat
setting uses less than a half of its power.
The data in the table is for
guidance only.
5.2 The noises during
operation
If you can hear:
Heat setting
Use to:
Time
(min)
Hints
Keep cooked food warm.
as necessary
Put a lid on the cookware.
1-3
Hollandaise sauce, melt: butter, chocolate, gelatine.
5 - 25
Mix from time to time.
1-3
Solidify: fluffy omelettes,
baked eggs.
10 - 40
Cook with a lid on.
-1
ENGLISH
13
Heat setting
Use to:
Time
(min)
Hints
3-5
Simmer rice and milkbased
dishes, heating up readycooked meals.
25 - 50
Add the minimum twice as
much liquid as rice, mix milk
dishes part procedure
through.
5-7
Steam vegetables, fish, meat.
20 - 45
Add some tablespoons of liquid.
7-9
Steam potatoes.
20 - 60
Use max. ¼ l water for 750 g of
potatoes.
7-9
Cook larger quantities of food, 60 - 150
stews and soups.
Up to 3 l liquid plus ingredients.
9 - 12
Gentle fry: escalope, veal cordon bleu, cutlets, rissoles,
sausages, liver, roux, eggs,
pancakes, doughnuts.
as necessary
Turn halfway through.
12 - 13
Heavy fry, hash browns, loin
steaks, steaks.
5 - 15
Turn halfway through.
14
Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.
Boil large quantities of water. Power function is activated.
6. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
6.1 General information
• Clean the hob after each use.
• Always use cookware with clean
bottom.
• Scratches or dark stains on the surface
have no effect on how the hob
operates.
• Use a special cleaner applicable for
the surface of the hob.
• Use a special scraper for the glass.
7. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
6.2 Cleaning the hob
• Remove immediately: melted plastic,
plastic foil, and food with sugar. If not,
the dirt can cause damage to the hob.
Put the special scraper on the glass
surface at an acute angle and move
the blade on the surface.
• Remove when the hob is sufficiently
cool: limescale rings, water rings, fat
stains, shiny metallic discoloration.
Clean the hob with a moist cloth and
some detergent. After cleaning, rub
the hob dry with a soft cloth.
14
www.aeg.com
7.1 What to do if...
Problem
Possible cause
You cannot activate or oper- The hob is not connected to
ate the hob.
an electrical supply or it is
connected incorrectly.
The fuse is released.
Remedy
Check if the hob is correctly
connected to the electrical
supply. Refer to the connection diagram.
Make sure that the fuse is
the cause of the malfunction.
If the fuse releases again
and again, contact a qualified electrician.
Activate the hob again and
set the heat setting in less
than 10 seconds.
You touched 2 or more sensor fields at the same time.
Touch only one sensor field.
STOP+GO function operates.
Refer to "Daily use" chapter.
There is water or fat stains
on the control panel.
Clean the control panel.
An acoustic signal sounds
You put something on one
and the hob deactivates.
or more sensor fields.
An acoustic signal sounds
when the hob is deactivated.
Remove the object from the
sensor fields.
The hob deactivates.
Remove the object from the
sensor field.
You put something on the
sensor field
.
Residual heat indicator does
not come on.
The zone is not hot because If the zone operated suffiit operated only for a short
ciently long to be hot, speak
time.
to an Authorised Service
Centre.
Automatic Heat Up function
does not operate.
The zone is hot.
Let the zone become sufficiently cool.
The highest heat setting is
set.
The highest heat setting has
the same power as the function.
The heat setting changes
between two levels.
Power management function Refer to "Daily use" chapter.
operates.
The sensor fields become
hot.
The cookware is too large or Put large cookware on the
you put it too near to the
rear zones if possible.
controls.
ENGLISH
15
Problem
Possible cause
Remedy
There is no signal when you
touch the panel sensor
fields.
The signals are deactivated.
Activate the signals.
Refer to "Daily use" chapter.
comes on.
Automatic Switch Off operates.
Deactivate the hob and activate it again.
comes on.
The Child Safety Device or
the Lock function operates.
Refer to "Daily use" chapter.
comes on.
There is no cookware on the
zone.
Put cookware on the zone.
The cookware is incorrect.
Use the correct cookware.
Refer to “Hints and tips”
chapter.
The diameter of the bottom
of the cookware is too small
for the zone.
Use cookware with correct
dimensions.
Refer to “Technical information” chapter.
The cookware does not cover the cross / square.
Cover the cross / square
fully.
There is an error in the hob.
Disconnect the hob from the
electrical supply for some
time. Disconnect the fuse
from the electrical system of
the house. Connect it again.
and a number come on.
If
comes on again, speak
to an Authorised Service
Centre.
comes on.
The electrical connection is
Speak to a qualified electriincorrect. The supply voltage cian to check the installation.
is out of range.
comes on.
There is an error in the hob
because a cookware boils
dry. Automatic Switch Off
and the overheating protection for the zones operate.
Deactivate the hob. Remove
the hot cookware. After approximately 30 seconds, activate the zone again. If the
cookware was the problem,
the error message goes out.
Residual heat indicator can
stay on. Let the cookware
become sufficiently cool.
Check if your cookware is
compatible with the hob.
Refer to “Hints and tips”
chapter.
16
www.aeg.com
Problem
comes on.
Possible cause
Remedy
The cooling fan is blocked.
Check if objects block the
cooling fan. If
comes on
again, speak to an Authorised Service Centre.
comes on.
The electrical connection is
incorrect. The hob is connected only to one phase.
7.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Give also
three digit letter code for the glass
ceramic (it is in the corner of the glass
Speak to a qualified electrician to check the installation.
Refer to the connection diagram.
surface) and an error message that
comes on. Make sure, you operated the
hob correctly. If not the servicing by a
service technician or dealer will not be
free of charge, also during the warranty
period. The instructions about the
Service Centre and conditions of
guarantee are in the guarantee booklet.
8. INSTALLATION
WARNING!
Refer to Safety chapters.
8.1 Before the installation
Before you install the hob, write down
the information bellow from the rating
plate. The rating plate is on the bottom
of the hob.
Serial number ...........................
8.2 Built-in hobs
Only use the built-in hobs after you
assemble the hob into correct built-in
units and work surfaces that align to the
standards.
8.3 Connection cable
• For a single phase or two phase
connection use the following (or
higher) mains cable type: H05BB-F
Tmax 90°C.
• To replace the damaged mains cable
use the following (or higher) mains
cable type: H05BB-F Tmax 90°C.
Speak to your local Service Centre.
ENGLISH
8.4 Assembly
min.
500mm
min.
50mm
min.
2mm
min. 2 mm
A
min. 2 mm
B
< 20 mm
B
> 20 mm
min. 500 mm
B
57 mm
41 mm
31 mm
A
12 mm
28 mm
38 mm
A
min
30 mm
min. 500 mm
A
12 mm
28 mm
38 mm
B
57 mm
41 mm
31 mm
min.
38 mm
min.
2 mm
R 5mm
min.
55mm
+1
490+1mm 750 mm
17
18
www.aeg.com
min.
12 mm
min.
2 mm
8.5 Protection box
If you use a protection box (an additional
accessory), the front airflow space of 2
mm and the protective floor directly
below the hob are not necessary. The
protection box accessory may not be
available in some countries. Please
contact your local supplier.
You can not use the
protection box if you install
the hob above an oven.
9. TECHNICAL INFORMATION
9.1 Rating plate
Modell HK874400FB
Typ 58 GBD CC AU
Induction 7.4 kW
Ser.Nr. .................
AEG
PNC 949 595 223 00
220 - 240 V 50 - 60 Hz
Made in Germany
7.4 kW
ENGLISH
19
9.2 Cooking zones specification
Cooking zone
Nominal power Power function
(maximum heat [W]
setting) [W]
Power function Cookware diammaximum dura- eter [mm]
tion [min]
Left front
2300
3200
10
125 - 210
Left rear
2300
3200
10
125 - 210
Right front
2300
3200
10
125 - 210
Right rear
2300
3200
10
125 - 210
The power of the cooking zones can be
different in some small range from the
data in the table. It changes with the
material and dimensions of the
cookware.
For optimal cooking results use
cookware not larger than the diameter in
the table.
10. ENERGY EFFICIENCY
10.1 Product information according to EU 66/2014
Model identification
HK874400FB
Type of hob
Built-In Hob
Number of cooking zones
4
Heating technology
Induction
Diameter of circular cooking zones (Ø)
Left front
Left rear
Right front
Right rear
21.0 cm
21.0 cm
21.0 cm
21.0 cm
Energy consumption per cooking zone (EC electric cooking)
Left front
Left rear
Right front
Right rear
172.6 Wh / kg
174.9 Wh / kg
178.3 Wh / kg
174.9 Wh / kg
Energy consumption of the hob (EC electric hob)
EN 60350-2 - Household electric cooking
appliances - Part 2: Hobs - Methods for
measuring performance
The energy measurements referring to
the cooking area are identified by the
crosses of the respective cooking zones.
10.2 Energy saving
You can save energy during everyday
cooking if you follow below hints.
175.2 Wh / kg
• When you heat up water, use only the
amount you need.
• If it is possible, always put the lids on
the cookware.
• Before you activate the cooking zone
put the cookware on it.
• Put the smaller cookware on the
smaller cooking zones.
• Put the cookware directly in the
centre of the cooking zone.
• Use the residual heat to keep the
food warm or to melt it.
20
www.aeg.com
11. ENVIRONMENT CONCERNS
Recycle the materials with the symbol .
Put the packaging in applicable
containers to recycle it. Help protect the
environment and human health and to
recycle waste of electrical and electronic
appliances. Do not dispose appliances
*
marked with the symbol with the
household waste. Return the product to
your local recycling facility or contact
your municipal office.
ENGLISH
21
22
www.aeg.com
ENGLISH
23
867312215-A-392014
www.aeg.com/shop
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising