AEG | HK874400FB | User manual | Aeg HK874400FB User Manual

HK874400FB
EN User manual
2
www.aeg.com
CONTENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
HELPFUL HINTS AND TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CARE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
TECHNICAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
GREAT BRITAIN & IRELAND - GUARANTEE/CUSTOMER SERVICE . . . . . . . . . . . . . . . . . 18
EUROPEAN GUARANTEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable
performance for many years, with innovative technologies that help make life simpler –
features you might not find on ordinary appliances. Please spend a few minutes reading to get
the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com
Register your product for better service:
www.aeg.com/productregistration
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
ENGLISH
3
1. SAFETY INFORMATION
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is
not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions
with the appliance for future reference.
1.1 Children and vulnerable people safety
WARNING!
Risk of suffocation, injury or permanent disability.
• This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they are supervised by an adult or a
person who is responsible for their safety.
• Do not let children play with the appliance.
• Keep all packaging away from children.
• Keep children and pets away from the appliance
when it operates or when it cools down. Accessible
parts are hot.
• If the appliance has a child safety device, we recommend that you activate it.
• Cleaning and user maintenance shall not be made by
children without supervision.
1.2 General Safety
• The appliance and its accessible parts become hot
during use. Do not touch the heating elements.
• Do not operate the appliance by means of an external timer or separate remote-control system.
• Unattended cooking on a hob with fat or oil can be
dangerous and may result in fire.
4
www.aeg.com
• Never try to extinguish a fire with water, but switch off
the appliance and then cover flame e.g. with a lid or a
fire blanket.
• Do not store items on the cooking surfaces.
• Do not use a steam cleaner to clean the appliance.
• Metallic objects such as knives, forks, spoons and lids
should not be placed on the hob surface since they
can get hot.
• If the glass ceramic surface is cracked, switch off the
appliance to avoid the possibility of electric shock.
• After use, switch off the hob element by its control
and do not rely on the pan detector.
2.
SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied with the appliance.
• Keep the minimum distance from the
other appliances and units.
• Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
• Seal the cut surfaces with a sealant to
prevent moisture to cause swelling.
• Protect the bottom of the appliance
from steam and moisture.
• Do not install the appliance adjacent
to a door or under a window. This prevents hot cookware to fall from the appliance when the door or the window
is opened.
• If the appliance is installed above
drawers make sure that the space, between the bottom of the appliance
and the upper drawer, is sufficient for
air circulation.
• Make sure that the ventilation space of
2 mm, between the worktop and the
front of the below unit, is free. The
warranty does not cover damages
caused by the lack of an adequate
ventilation space.
• The bottom of the appliance can get
hot. We recommend to install a noncombustile separation panel under the
appliance to prevent access to the
bottom.
Electrical connection
WARNING!
Risk of fire and electrical shock.
• All electrical connections must be
made by a qualified electrician.
• The appliance must be earthed.
• Before carrying out any operation
make sure that the appliance is disconnected from the power supply.
• Use the correct electricity mains cable.
• Do not let the electricity mains cable
tangle.
• Make sure the mains cable or plug (if
applicable) does not touch the hot ap-
ENGLISH
•
•
•
•
•
•
pliance or hot cookware, when you
connect the appliance to the near
sockets
Make sure the appliance is installed
correctly. Loose and incorrect electricity mains cable or plug (if applicable)
can make the terminal become too
hot.
Make sure that a shock protection is
installed.
Use the strain relief clamp on cable.
Make sure not to cause damage to the
mains plug (if applicable) or to the
mains cable. Contact the Service or an
electrician to change a damaged
mains cable.
The electrical installation must have an
isolation device which lets you disconnect the appliance from the mains at
all poles. The isolation device must
have a contact opening width of minimum 3 mm.
Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
2.2 Use
WARNING!
Risk of injury, burns or electric
shock.
• Use this appliance in a household environment.
• Do not change the specification of this
appliance.
• Do not let the appliance stay unattended during operation.
• Do not operate the appliance with wet
hands or when it has contact with water.
• Do not put cutlery or saucepan lids on
the cooking zones. They can become
hot.
• Set the cooking zone to “off” after
each use. Do not rely on the pan detector.
• Do not use the appliance as a work
surface or as a storage surface.
• If the surface of the appliance is
cracked, disconnect immediately the
appliance from the power supply. This
to prevent an electrical shock.
5
• Users with a pacemaker must keep a
distance of minimum 30 cm from the
induction cooking zones when the appliance is in operation.
• When you place food into a hot oil, it
may splash.
WARNING!
Risk of fire or explosion.
• Fats and oil when heated can release
flammable vapours. Keep flames or
heated objects away from fats and oils
when you cook with them.
• The vapours that very hot oil releases
can cause spontaneous combustion.
• Used oil, that can contain food remnants, can cause fire at a lower temperature than oil used for the first
time.
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
WARNING!
Risk of damage to the appliance.
• Do not keep hot cookware on the control panel.
• Do not let cookware to boil dry.
• Be careful not let objects or cookware
fall on the appliance. The surface can
be damaged.
• Do not activate the cooking zones
with empty cookware or without cookware.
• Do not put aluminium foil on the appliance.
• Cookware made of cast iron, aluminium or with a damaged bottom can
cause scratches on the glass ceramic.
Always lift these objects up when you
have to move them on the cooking
surface.
2.3 Care and Cleaning
WARNING!
Risk of damage to the appliance.
• Clean regularly the appliance to prevent the deterioration of the surface
material.
• Do not use water spray and steam to
clean the appliance.
6
www.aeg.com
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal objects.
• Contact your municipal authority for
information on how to discard the appliance correctly.
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and discard it.
2.4 Disposal
WARNING!
Risk of injury or suffocation.
3. PRODUCT DESCRIPTION
3.1 General overview
1
2
1 Induction cooking zone
2 Induction cooking zone
3 Induction cooking zone
4 Control panel
5 Induction cooking zone
5
4
3
3.2 Control panel layout
To see the control panel activate
the appliance with
1
2
3
11
4
10 9
5
8
6
7
Use the sensor fields to operate the appliance. The displays, indicators and
sounds tell which functions operate.
sensor field
To activate and deactivate the STOP
+GO function.
1
2
function
A heat setting display
To show the heat setting.
ENGLISH
sensor field
function
3
The timer display
To show the time in minutes.
4
Timer indicators of cooking
zones
To show for which cooking zone you set
the time.
5
To activate the Grill Function.
6
To lock/unlock the control panel.
7
To activate the Power function.
A control bar
8
To set the heat setting.
To increase or decrease the time.
/
9
7
10
To activate and deactivate the appliance.
11
To set the cooking zone.
3.3 Heat setting displays
Display
Description
The cooking zone is deactivated.
The cooking zone operates.
-
The
function operates.
The Automatic Heat Up function operates.
Power function operates.
+ digit
There is a malfunction.
/
OptiHeat Control (3 step Residual heat indicator) : continue cook / stay warm / residual heat.
/
Lock / The Child Safety Device operates.
Not correct cookware or too small or no cookware on
the cooking zone.
The Automatic Switch Off function operates.
3.4 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
\
\
The risk of burns
from residual heat!
OptiHeat Control shows the level of the
residual heat. The induction cooking
zones make the heat necessary for cooking directly in the bottom of the cookware. The glass ceramic is hot from the
heat of the cookware.
8
www.aeg.com
4. DAILY USE
4.1 Activation and
deactivation
Touch
for 1 second to activate or deactivate the appliance.
The control panel comes on after you activate the appliance and goes off after
you deactivate the appliance.
When the appliance is deactivated you
sensor field.
can see only
4.3 The heat setting
Touch the control bar at the heat setting. Change clockwise or counterclockwise, if it is necessary. Do not release before you have a correct heat setting. The
display shows the heat setting.
4.2 Automatic Switch Off
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated (
).
• You do not set the heat setting after
you activate the appliance.
• You spill something or put something
on the control panel for more than 10
seconds, (a pan, a cloth, etc.). An
acoustic signal sounds some time and
the appliance deactivates. Remove the
object or clean the control panel.
• The appliance becomes too hot (e.g.
when, a saucepan boils dry). Before
you use the appliance again, wait for
the cooking zone to cool down.
• You use incorrect cookware. The symcomes on and the cooking
bol
zone deactivates automatically after 2
minutes.
• You do not deactivate a cooking zone
or change the heat setting. After some
comes on and the appliance
time
deactivates. See below.
• The relation between heat setting and
times of the Automatic Switch Off
function:
•
,
— 6 hours
•
-
•
-
•
— 5 hours
— 4 hours
-
— 1.5 hours
4.4 Grill Function
Use the Grill Function with the
Maxisense Plancha Grill accessory1).
The Grill Function connects two right
side cooking zones under the accessory
and they operate as one.
First set the heat setting for one of the
cooking zones.
.
To activate the Grill Function, touch
To set or change the heat setting, touch
one of the control sensors.
To deactivate the Grill Function, touch
. The cooking zones operate independently.
4.5 Automatic Heat Up
You can get a necessary heat setting in a
shorter time if you activate the Automatic Heat Up function. This function sets
the highest heat setting for some time
(see the diagram), and then decreases to
the necessary heat setting.
To start the Automatic Heat Up function
for a cooking zone:
1.
Touch
play).
(
comes on in the dis-
1) The Maxisense Plancha Grill accessory is not supplied with the appliance. For more information, please contact your local supplier.
ENGLISH
9
2.
Immediately touch the necessary
heat setting. After 5 seconds
comes on in the display.
To stop the function change the heat
setting.
12
11
10
9
8
7
6
5
4
3
2
1
0
4.8 Timer
1
2 3 4 5 6 7
8 9 10 11 12 13 14
4.6 Power function
The Power function makes more power
available to the induction cooking zones.
The Power function can be activated for
a limited period of time ( see Technical
Information chapter). After that, the induction cooking zone automatically sets
back to highest heat setting. To activate,
,
comes on. To deactivate,
touch
change the heat setting.
4.7 Power management
The power management divides the
power between two cooking zones in a
pair (see the illustration). The power
function increases the power to the maximum level for one cooking zone in the
pair. The power in the second cooking
zone automatically decreases. The heat
setting display for the reduced zone
changes between two levels.
Count Down Timer
Use the Count Down Timer to set how
long the cooking zone operates for only
this one time.
Set the Count Down Timer after the
selection of the cooking zone.
You can set the heat setting before or after you set the timer.
• To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
• To activate the Count Down Timer:
of the timer to set the time (
touch
00 - 99 minutes). When the indicator
of the cooking zone start to flash slow,
the time counts down.
• To see the remaining time: set the
. The indicator
cooking zone with
of the cooking zone starts to flash
quickly. The display shows the remaining time.
• To change the Count Down Timer:
. Touch
set the cooking zone with
or .
• To deactivate the timer: set the
cooking zone with
. Touch . The
remaining time counts back to 00 .
The indicator of the cooking zone
goes out.
When the countdown comes to an
end, the sound operates and 00 flashes. The cooking zone deactivates.
• To stop the sound: touch
10 www.aeg.com
CountUp Timer ( The count up
timer)
Use the CountUp Timer to monitor how
long the cooking zone operates.
• To set the cooking zone (if more
than 1 cooking zone operate ) :
again and again until the intouch
dicator of a necessary cooking zone
comes on.
• To activate the CountUp Timer:
touch of the timer
comes on.
When the indicator of the cooking
zone starts to flash slow, the time
counts up. The display switches beand counted time (minutes).
tween
• To see how long the cooking zone
operates: set the cooking zone with
. The indicator of the cooking zone
starts to flash quickly. The display
shows the time that the cooking zone
operates.
• To deactivate the CountUp Timer:
and
set the cooking zone with
touch
or to deactivate the timer.
The indicator of the cooking zone
goes out.
Minute Minder
You can use the timer as a Minute Minder while the cooking zones do not operate. Touch
. Touch
or of the
timer to set the time. When the time
comes to an end, the sound operates
and 00 flashes.
• To stop the sound: touch
4.9 STOP+GO
The
function sets all cooking zones
that operate to the lowest heat setting (
).
When
operates, you cannot change
the heat setting.
The
function does not stop the timer
function.
• To activate this function touch
.
The symbol
comes on.
• To deactivate this function touch
.
The heat setting that you set before
comes on.
4.10 Lock
When the cooking zones operate, you
can lock the control panel, but not
. It
prevents an accidental change of the
heat setting.
First set the heat setting.
. The symTo start this function touch
bol
comes on for 4 seconds.
The Timer stays on.
To stop this function touch
. The heat
setting that you set before comes on.
When you stop the appliance, you also
stop this function.
4.11 The Child Safety Device
This function prevents an accidental operation of the appliance.
To activate The Child Safety Device
• Activate the appliance with
. Do
not set the heat settings.
• Touch
for 4 seconds. The symbol
comes on.
• Deactivate the appliance with
.
To deactivate The Child Safety Device
• Activate the appliance with
. Do
not set the heat settings. Touch
for 4 seconds. The symbol
comes
on.
• Deactivate the appliance with
.
To override The Child Safety Device
for only one cooking time
• Activate the appliance with
. The
symbol
comes on.
• Touch
for 4 seconds. Set the heat
setting in 10 seconds. You can operate the appliance.
• When you deactivate the appliance
, The Child Safety Device opwith
erates again.
4.12 OffSound Control
(Deactivation and activation of
the sounds)
Deactivation of the sounds
Deactivate the appliance.
ENGLISH
Touch
for 3 seconds. The displays
come on and go out. Touch
for 3 seconds.
comes on, the sound is on.
,
comes on, the sound is
Touch
off.
When this function operates, you can
hear the sounds only when:
• you touch
11
Activation of the sounds
Deactivate the appliance.
Touch
for 3 seconds. The displays
come on and go out. Touch
for 3 seconds.
comes on, because the sound
is off. Touch
,
comes on. The
sound is on.
• the Minute Minder comes down
• the Count Down Timer comes down
• you put something on the control panel.
5. HELPFUL HINTS AND TIPS
INDUCTION COOKING ZONES
5.2 Use of the cooking zones
IMPORTANT
For induction cooking zones a strong
electro-magnetic field creates the heat
in the cookware very quickly.
5.1 Cookware for induction
cooking zones
Use the induction cooking zones
with correct cookware.
Cookware material
• correct: cast iron, steel, enamelled
steel, stainless steel, the bottom made
of multi-layer (with correct mark from a
manufacturer).
• not correct: aluminium, copper, brass,
glass, ceramic, porcelain.
Cookware is correct for an induction
hob if …
• ... some water boils very quickly on a
zone set to the highest heat setting.
• ... a magnet pulls on to the bottom of
the cookware.
The bottom of the cookware
must be as thick and flat as possible.
Cookware dimensions: induction cooking zones adapt to the dimension of the
bottom of the cookware automatically to
some limit.
Put the cookware on the cross which is
on the surface that you cook. Cover the
cross fully. The magnetic part of the bottom of the cookware must be 125 mm
minimum. Induction cooking zones
adapt to the dimension of the bottom of
the cookware automatically. You can
cook with the large cookware on two
cooking zones at the same time.
5.3 The noises during
operation
If you can hear
• crack noise: cookware is made of different materials (Sandwich construction).
• whistle sound: you use one or more
cooking zones with high power levels
and the cookware is made of different
materials (Sandwich construction).
• humming: you use high power levels.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer to appliance malfunction.
5.4 Energy saving
How to save energy
12 www.aeg.com
• If it is possible, always put the lids on
the cookware.
• Put cookware on a cooking zone before you start it.
• Use the residual heat to keep the food
warm or to melt it.
The cooking zone efficiency
The cooking zone efficiency is related to
the diameter of the cookware. The cookware with a smaller diameter than the
minimum receives only a part of the
power generated by the cooking zone.
For the minimum diameters see the
Technical Information chapter.
5.5 Öko Timer (Eco Timer)
To save energy, the heater of the
cooking zone deactivates before
He
at
set
tin
g
the count down timer sounds.
The difference in the operation
time depends on the heat setting
level and the length of the cooking operation.
5.6 The Examples of cooking
applications
The relation between the heat setting
and the cooking zone consumption of
power is not linear.
When you increase the heat setting it is
not proportional to the increase of the
cooking zone consumption of power.
It means that the cooking zone with the
medium heat setting uses less than a
half of its power.
The data in the table is for guidance only.
Use to:
Time
Hints
Nominal
power consumption
Keep warm the food
you cooked
as required
Put a lid on a cookware
3%
13
Hollandaise sauce,
melt: butter, chocolate, gelatine
5 - 25 min
Mix from time to
time
3–8%
13
Solidify: fluffy omelettes, baked eggs
10 - 40 min
Cook with a lid on
3–8%
35
Simmer rice and milkbased dishes, heating
up ready-cooked
meals
25 - 50 min
Add the minimum
twice as much liquid
as rice, mix milk
dishes part procedure through
8 – 13 %
57
Steam vegetables,
fish, meat
20 - 45 min
Add some tablespoons of liquid
13 – 18 %
79
Steam potatoes
20 - 60 min
Use max. ¼ l water
18 – 25 %
for 750 g of potatoes
79
Cook larger quantities
of food, stews and
soups
60 - 150
min
Up to 3 l liquid plus
ingredients
912
Gentle fry: escalope,
as necessaveal cordon bleu, cut- ry
lets, rissoles, sausages, liver, roux, eggs,
pancakes, doughnuts
1
18 – 25 %
Turn halfway through 25 – 45 %
ENGLISH
He
at
set
tin
g
Use to:
12 - Heavy fry, hash
13 browns, loin steaks,
steaks
14
Time
Hints
5 - 15 min
Turn halfway through 45 – 64 %
13
Nominal
power consumption
Boil water, cook pasta, sear meat (goulash, pot roast),
deep-fry chips
100 %
Boil large quantities of water. Power function is activated.
6. CARE AND CLEANING
Clean the appliance after each use.
Always use cookware with clean bottom.
Scratches or dark stains on the
glass-ceramic cause no effect on
how the appliance operates.
To remove the dirt:
– Remove immediately: melted
plastic, plastic foil, and food with
sugar. If not, the dirt can cause
damage to the appliance. Use a
special scraper for the glass . Put
the scraper on the glass surface at
1.
an acute angle and move the
blade on the surface .
– Remove after the appliance is
sufficiently cool: limescale rings ,
water rings, fat stains, shiny metallic discolorations. Use a special
cleaning agent for glass ceramic
or stainless steel.
2. Clean the appliance with a moist
cloth and some detergent.
3. At the end rub the appliance dry
with a clean cloth.
7. TROUBLESHOOTING
Problem
Possible cause
You cannot activate the
appliance or operate it.
Remedy
Activate the appliance
again and set the heat
setting in less than 10
seconds.
You touched 2 or more
sensor fields at the same
time.
Touch only one sensor
field.
The STOP+GO function
operates.
Refer to the chapter
“Daily Use”.
There is water or fat
stains on the control
panel.
Clean the control panel.
14 www.aeg.com
Problem
Possible cause
Remedy
An acoustic signal
sounds and the appliance deactivates.
An acoustic signal
sounds when the appliance is deactivated.
You put something on
one or more sensor
fields.
Remove the object from
the sensor fields.
The appliance deactivates.
You put something on
the sensor field
.
Remove the object from
the sensor field.
The residual heat indicator does not come on.
The cooking zone is not
hot because it operated
only for a short time.
If the cooking zone operated sufficiently long to
be hot, speak to the
service centre.
The Automatic Heat Up
function does not operate.
The cooking zone is hot.
Let the cooking zone become sufficiently cool.
The highest heat setting
is set.
The highest heat setting
has the same power as
the Automatic Heat Up
function.
The heat setting changes The Power management
between two levels.
is activated.
Refer to “Power management”.
The sensor fields become hot.
Put large cookware on
the rear cooking zones if
necessary.
The cookware is too
large or you put it too
near to the controls.
There is no signal when
The signals are deactivayou touch the panel sen- ted.
sor fields.
Activate the signals (refer
to “OffSound control”).
comes on.
The Automatic Switch
Off operates.
Deactivate the appliance
and activate it again.
comes on.
The Child Safety Device
or the Lock function operates.
Refer to the chapter
“Daily Use”.
comes on.
No cookware is on the
cooking zone.
Put cookware on the
cooking zone.
The cookware is incorrect.
Use the correct cookware.
The diameter of the bot- Use cookware with cortom of the cookware is
rect dimensions.
too small for the cooking
zone.
The cookware do not
cover the cross / square
fully.
Cover the cross / square
fully.
ENGLISH
Problem
and a number come
on.
Possible cause
There is an error in the
appliance.
15
Remedy
Disconnect the appliance from the electrical
supply for some time.
Disconnect the fuse from
the electrical system of
the house. Connect it
comes on
again. If
again, speak to the service centre.
comes on.
The electrical connection Speak to a qualified
is incorrect. The supply
electrician to check the
voltage is out of range.
installation.
comes on.
There is an error in the
appliance because a
cookware boils dry. The
overheating protection
for the cooking zones
and the Automatic
Switch Off operate.
Deactivate the appliance. Remove the hot
cookware. After approximately 30 seconds, activate the cooking zone
again. If the cookware
was the problem, the error message goes out of
the display, but the residual heat indicator can
stay. Let the cookware
become sufficiently cool
and refer to “Cookware
for the induction cooking
zone” to see if your
cookware is compatible
with the appliance.
comes on.
The cooling fan is
blocked.
Check if objects block
the cooling fan. If
comes on again, speak
to the service center.
comes on.
The electrical connection Connect the appliance
is incorrect. The applias you see it in the conance is connected only
nection illustration.
to one phase.
If you tried the above solutions and cannot repair the problem, speak to your
dealer or the customer service. Give the
data from the rating plate, three digit
letter code for the glass ceramic (it is in
the corner of the glass surface) and an
error message that comes on.
Make sure, you operated the appliance
correctly. If not the servicing by a customer service technician or dealer will
not be free of charge, also during the
warranty period. The instructions about
the customer service and conditions of
guarantee are in the guarantee booklet.
16 www.aeg.com
8. INSTALLATION
WARNING!
Refer to the Safety chapters.
Before the installation
rect built-in units and work surfaces
that align to the standards.
8.2 Connection cable
Before the installation of the appliance,
record the information below from the
rating plate. The rating plate is on the
bottom of the appliance casing.
• Model ...........................
• PNC .............................
• Serial number ....................
• Use the correct mains cable of type
H05BB-F Tmax 90°C (or higher) for a
single phase or two phase connection.
• Replace the damaged mains cable
with a special cable (type H05BB-F
Tmax 90°C or higher). Speak to your
local Service Centre.
8.1 Built-in appliances
• Only use the built-in appliances after
you assemble the appliance into cor-
8.3 Assembly
min.
500mm
min.
50mm
min.
2mm
B
A
min. 2 mm
< 20 mm
A
min. 2 mm
> 20 mm
min. 500 mm
B
A
12 mm 57 mm
28 mm 41 mm
38 mm 31 mm
B
min
30 mm
min. 500 mm
B
A
12 mm 57 mm
28 mm 41 mm
38 mm 31 mm
ENGLISH
17
min.
12 mm
min.
2 mm
R 5mm
min.
55mm
490+1mm
750+1mm
min.
38 mm
min.
2 mm
If you use a protection box (an additional
accessory1)), the front airflow space of 2
mm and protective floor directly below
the appliance are not necessary.
You can not use the protection box if
you install the appliance above an oven.
1) The protection box accessory may not be available in some countries. Please contact
your local supplier.
9. TECHNICAL INFORMATION
Modell HK874400FB
Prod.Nr. 949 595 223 00
Typ 58 GBD CC AU
220 - 240 V 50 - 60 Hz
Induction 7.4 kW
Made in Germany
Ser.Nr. ..........
7.4 kW
AEG
18 www.aeg.com
Cooking zones power
Cooking
zone
Nominal
Power (Max
heat setting)
[W]
Power Function activated [W]
Power function maximum duration [min]
Minimum
cookware diameter [mm]
Right rear
2300 W
3200 W
10
125
Right front
2300 W
3200 W
10
125
Left rear
2300 W
3200 W
10
125
Left front
2300 W
3200 W
10
125
The power of the cooking zones can be
different in some small range from the
data in the table. It changes with the material and dimensions of the cookware.
10. GB IE GREAT BRITAIN & IRELAND - GUARANTEE/
CUSTOMER SERVICE
10.1 Standard guarantee
conditions:
We, Electrolux, undertake that if within
12 months of the date of the purchase
this Electrolux appliance or any part
thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition
that:
• Appliance has been correctly installed
and used only on the electricity supply
stated on the rating plate.
• Appliance has been used for normal
domestic purposes only, in accordance with manufacturer's instructions.
• Appliance hasn't been serviced, maintained, repaired, taken apart or tampered with by person not authorised
by us.
• Electrolux Service Force Centre must
undertake all service work under this
guarantee
• Any appliance or defective part replaced shall become the Company's
property.
• This guarantee is in addition to your
statutory and other legal rights.
Exclusions
• Damage, calls resulting from transport, improper use, neglect, light
bulbs, removable parts of glass, plastic.
• Costs for calls to put right appliance
which is improperly installed, calls to
appliances outside United Kingdom.
• Appliances found to be in use within a
commercial environment, plus those
which are subject to rental agreements.
• Products of Electrolux manufacturer
that are not marketed by Electrolux
Service and Spare Parts.Please contact
your local Service Force Centre: 08445
616 616(Call will be routed to Service
Force Centre covering your postcode
area). For address of local Service Force
Centre and further information, please
visit: www.serviceforce.co.uk Before
calling out an engineer, please ensure
you have read the details under the
heading "What to do if... / Troubleshooting". When you contact the Service
Force Centre you will need to give the
following details: Your name, address
and postcode, your telephone number,
clear concise details of the fault, model
and serial number of the appliance
(found on the rating plate), the purchase
ENGLISH
date. Please note a valid purchase receipt or guarantee documentation is required for in guarantee service calls.
19
Customer Care
Department,
Tel: (Calls may be recorded for training purposes)
Customer Care.Please contact our Customer Care Department: Electrolux Major Appliances, Addington Way, Luton,
Bedfordshire, LU4 9QQ or visit our website at www.electrolux.co.uk
ZanussiElectrolux
08445 612 612
Customer Care
Department,
Tel: (Calls may be recorded for training purposes)
For Customer Service in The
Republic of Ireland please
contact us at the address
below:
Electrolux
08445 613 613
AEGElectrolux
08445 611 611
Electrolux Group (Irl) Ltd, Long Mile
Road, Dublin 12, Republic of Ireland
Tel: +353 (0)1 4090751, Email: service.eid@electrolux.ie
11. EUROPEAN GUARANTEE
GB This appliance is guaranteed by
Electrolux in each of the countries listed
at the back of this user manual, for the
period specified in the appliance guarantee or otherwise by law. If you move
from one of these countries to another
of the countries listed, the appliance
guarantee will move with you subject to
the following qualifications:• The appliance guarantee starts from
the date you first purchased the appliance which will be evidenced by production of a valid purchase document
issued by the seller of the appliance.
• The appliance guarantee is for the
same period and to the same extent
for labour and parts as exists in your
new country of residence for this particular model or range of appliances.
• The appliance guarantee is personal
to the original purchaser of the appliance and cannot be transferred to another user.
• The appliance is installed and used in
accordance with instructions issued by
Electrolux and is only used within the
home, i.e. is not used for commercial
purposes.
• The appliance is installed in accordance with all relevant regulations in
force within your new country of residence.
The provisions of this European Guarantee do not affect any of the rights granted to you by law.
12. WWW.ELECTROLUX.COM
Albania
+355 4 261 450
Rruga “Kavajës”, ish-parku autobuzëve, Tiranë
20 www.aeg.com
Belgique/België/Belgien
+32 2 7162444
Raketstraat 40, 1130 Brussel/
Bruxelles
Česká Republika
+420 261 302 261
Budějovická 3, Praha 4, 140 21
Danmark
+45 70 11 74 00
Strevelinsvej 38-40, 7000 Fredericia
Deutschland
+49 180 32 26 622
Fürther Str. 246, 90429 Nürnberg
Eesti
+37 2 66 50 030
Pärnu mnt. 153, 11624 Tallinn
España
+34 902 11 63 88
Carretera M-300, Km. 29,900 Alcalá de Henares Madrid
France
08 92 68 24 33
(0.34€/min)
www.electrolux.fr
Great Britain
+44 8445 616 616
Addington Way, Luton, Bedfordshire LU4 9QQ
Hellas
+30 23 10 56 19 70
4, Limnou Str., 54627 Thessaloniki
Hrvatska
+385 1 63 23 338
Slavonska avenija 3, 10000 Za‐
greb
Ireland
+353 1 40 90 753
Long Mile Road Dublin 12
Italia
+39 (0) 434 558500
Corso Lino Zanussi, 30 - 33080
Porcia (PN)
Latvija
+371 67313626
Kr. Barona iela 130/2, LV-1012,
Riga
Lietuva
+370 5 278 06 03
Ozo 10a, LT-08200 Vilnius
Luxembourg
+352 42 431 301
Rue de Bitbourg, 7, L-1273
Hamm
Magyarország
(06-1)467-3205
+361 252 1773
H-1142 Budapest XIV, Erzsébet
Királyné útja 87
Nederland
+31 17 24 68 300
Vennootsweg 1, 2404 CG - Alphen aan den Rijn
Norge
+47 81 5 30 222
Risløkkvn. 2 , 0508 Oslo
Österreich
0810 955030
Herziggasse 9, 1230 Wien
Polska
+48 22 43 47 300
ul. Kolejowa 5/7, 01–217 Wars‐
zawa
Portugal
+35 12 14 40 39 39
Quinta da Fonte - Edifício Gonçalves Zarco - Q 35 -2774-518
Paço de Arcos
Romania
+40 21 451 20 30
Str. Garii Progresului 2, S4,
040671 RO
Schweiz - Suisse Svizzera
0848 848 111
Industriestrasse 10, CH-5506 Mägenwil
ENGLISH
21
Slovenija
+38 61 24 25 731
Gerbičeva ulica 110, 1000 Ljubl‐
jana
Slovensko
+421 2 32 14 13
34-5
Electrolux Slovakia s.r.o., Elec‐
trolux Domáce spotrebiče SK,
Galvaniho 17/B, 821 04 Bratisla‐
va
Suomi
030 600 5200
Lankapuhelinverkosta 0,0828€/puhelu+0,032€/min Matkapuhelinverkosta 0,192€/min
Sverige
+46 (0)771 76 76 76
Electrolux Service, S:t Göransgatan 143, S-105 45 Stockholm
Türkiye
+90 21 22 93 10 25
Tarlabaşı caddesi no : 35 Tak‐
sim İstanbul
Россия
8-800-200-3589
129090 Москва, Олимпийский
проспект, 16, БЦ "Олимпик"
Україна
+380 44 586 20 60
04074 Київ,
вул.Автозаводська, 2а, БЦ
"Алкон"
13. ENVIRONMENT CONCERNS
Recycle the materials with the
symbol . Put the packaging in
applicable containers to recycle it.
Help protect the environment and
human health and to recycle waste
of electrical and electronic
appliances. Do not dispose
appliances marked with the symbol
with the household waste. Return the
product to your local recycling
facility or contact your municipal
office.
22 www.aeg.com
ENGLISH
23
892951920-F-042013
www.aeg.com/shop
Download PDF

advertising