Aeg HK973500FB User Manual

Add to my manuals
24 Pages


Aeg HK973500FB User Manual | Manualzz
User Manual
1. SAFETY INFORMATION.................................................................................................3
2. CONDITIONS OF USE....................................................................................................4
3. SAFETY INSTRUCTIONS................................................................................................ 5
4. PRODUCT DESCRIPTION.............................................................................................. 7
5. DAILY USE........................................................................................................................9
6. HINTS AND TIPS........................................................................................................... 12
7. CARE AND CLEANING................................................................................................ 13
8. TROUBLESHOOTING...................................................................................................14
9. INSTALLATION............................................................................................................. 16
10. TECHNICAL DATA..................................................................................................... 19
11. ENERGY EFFICIENCY.................................................................................................19
12. WARRANTY ................................................................................................................ 20
Thank you for choosing this AEG product. We have created it to give you impeccable
performance for many years, with innovative technologies that help make life simpler
features you might not find on ordinary appliances. Please spend a few minutes
reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
Register your product for better service:
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following
data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
Before the installation and use of the appliance,
carefully read the supplied instructions. The
manufacturer is not responsible for any injuries or
damages that are the result of incorrect installation or
usage. Always keep the instructions in a safe and
accessible location for future reference.
1.1 Children and vulnerable people safety
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
Do not let children play with the appliance.
Keep all packaging away from children and dispose of
it appropriately.
Keep children and pets away from the appliance when
it operates or when it cools down. Accessible parts are
If the appliance has a child safety device, this should
be activated.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
Children aged 3 years and under must be kept away
from this appliance when it is in operation at all times.
1.2 General Safety
WARNING: The appliance and its accessible parts
become hot during use. Care should be taken to
avoid touching heating elements. Children less than 8
years of age shall be kept away unless continuously
Do not operate the appliance by means of an external
timer or separate remote-control system.
WARNING: Unattended cooking on a hob with fat or
oil can be dangerous and may result in fire.
NEVER try to extinguish a fire with water, but switch
off the appliance and then cover flame e.g. with a lid
or a fire blanket.
CAUTION: The cooking process has to be supervised.
A short term cooking process has to be supervised
WARNING: Danger of fire: Do not store items on the
cooking surfaces.
Metallic objects such as knives, forks, spoons and lids
should not be placed on the hob surface since they
can get hot.
Do not use a steam cleaner to clean the appliance.
After use, switch off the hob element by its control
and do not rely on the pan detector.
If the glass ceramic surface / glass surface is cracked,
switch off the appliance to avoid the possibility of
electric shock.
If the supply cord is damaged, it must be replaced by
the manufacturer, an authorized Service or similarly
qualified persons in order to avoid a hazard.
WARNING: Use only hob guards designed by the
manufacturer of the cooking appliance or indicated by
the manufacturer of the appliance in the instructions
for use as suitable or hob guards incorporated in the
appliance. The use of inappropriate guards can cause
This appliance is intended to be used in
household and similar applications such
• Farm houses
• By clients in serviced apartments,
holiday apartments and other
residential type environments.
3.1 Installation
Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged
• Follow the installation instruction
supplied with the appliance.
• Keep the minimum distance from the
other appliances and units.
• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
• Seal the cut surfaces with a sealant to
prevent moisture to cause swelling.
• Protect the bottom of the appliance
from steam and moisture.
• Do not install the appliance adjacent
to a door or under a window. This
prevents hot cookware to fall from the
appliance when the door or the
window is opened.
• If the appliance is installed above
drawers make sure that the space,
between the bottom of the appliance
and the upper drawer, is sufficient for
air circulation.
• The bottom of the appliance can get
hot. Make sure to install a noncombustible separation panel under
the appliance to prevent access to the
• Make sure that the ventilation space
of 2 mm, between the worktop and
the front of the below unit, is free.
The warranty does not cover damages
caused by the lack of an adequate
ventilation space.
3.2 Electrical Connection
Risk of fire and electrical
• All electrical connections should be
made by a qualified electrician.
• The appliance must be earthed.
• Before carrying out any operation
make sure that the appliance is
disconnected from the power supply.
• Make sure that the electrical
information on the rating plate agrees
with the power supply. If not, contact
an electrician.
• Make sure the appliance is installed
correctly. Loose and incorrect
electricity mains cable or plug (if
applicable) can make the terminal
become too hot.
• Use the correct electricity mains
• Do not let the electricity mains cable
• Make sure that a shock protection is
• Use the strain relief clamp on the
• Make sure the mains cable or plug (if
applicable) does not touch the hot
appliance or hot cookware, when you
connect the appliance to the near
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to
the mains plug (if applicable) or to the
mains cable. Contact our Authorised
Service Centre or an electrician to
change a damaged mains cable.
• The shock protection of live and
insulated parts must be fastened in
such a way that it cannot be removed
without tools.
• Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
• If the mains socket is loose, do not
connect the mains plug.
• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
• The electrical installation must have
an isolation device which lets you
disconnect the appliance from the
mains at all poles. The isolation
device must have a contact opening
width of minimum 3 mm.
3.3 Use
Risk of injury, burns and
electrical shock.
• Remove all the packaging, labelling
and protective film (if applicable)
before first use.
• Use this appliance in a household
• Do not change the specification of
this appliance.
• Make sure that the ventilation
openings are not blocked.
• Do not let the appliance stay
unattended during operation.
• Set the cooking zone to “off” after
each use.
• Do not rely on the pan detector.
• Do not put cutlery or saucepan lids on
the cooking zones. They can become
• Do not operate the appliance with
wet hands or when it has contact with
• Do not use the appliance as a work
surface or as a storage surface.
• If the surface of the appliance is
cracked, disconnect immediately the
appliance from the power supply. This
to prevent an electrical shock.
• Users with a pacemaker must keep a
distance of minimum 30 cm from the
induction cooking zones when the
appliance is in operation.
• When you place food into hot oil, it
may splash.
Risk of fire and explosion
• Fats and oil when heated can release
flammable vapours. Keep flames or
heated objects away from fats and oils
when you cook with them.
• The vapours that very hot oil releases
can cause spontaneous combustion.
• Used oil, that can contain food
remnants, can cause fire at a lower
temperature than oil used for the first
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
Risk of damage to the
• Do not keep hot cookware on the
control panel.
• Do not put a hot pan cover on the
glass surface of the hob.
• Do not let cookware to boil dry.
• Be careful not to let objects or
cookware fall on the appliance. The
surface can be damaged.
• Do not activate the cooking zones
with empty cookware or without
• Do not put aluminium foil on the
• Cookware made of cast iron,
aluminium or with a damaged bottom
can cause scratches on the glass /
glass ceramic. Always lift these
objects up when you have to move
them on the cooking surface.
• This appliance is for cooking
purposes only. It must not be used for
other purposes, for example room
3.4 Care and cleaning
• Clean regularly the appliance to
prevent the deterioration of the
surface material.
• Deactivate the appliance and let it
cool down before you clean it.
• Disconnect the appliance from the
electrical supply before maintenance.
• Do not use water spray and steam to
clean the appliance.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use any abrasive products,
abrasive cleaning pads, solvents or
metal objects.
3.5 Disposal
Risk of injury or suffocation.
• Contact your municipal authority for
information on how to discard the
appliance correctly.
• Disconnect the appliance from the
mains supply.
• Cut off the mains electrical cable
close to the appliance and dispose of
• Use original spare parts only.
3.6 Service
• To repair the appliance contact an
Authorised Service Centre.
4.1 Cooking surface layout
1 Induction cooking zone
2 Control panel
4.2 Control panel layout
To see the control panel activate the appliance with
Use the sensor fields to operate the appliance. The displays, indicators and sounds tell
which functions operate.
Sensor Function
To activate and deactivate the function.
Heat setting display
To show the heat setting.
Timer indicators of cooking To show for which zone you set the time.
Sensor Function
To show the time in minutes.
Timer display
Lock / The Child Safety De- To lock / unlock the control panel.
To select the cooking zone.
To increase or decrease the time.
To activate and deactivate the hob.
Control bar
To set a heat setting.
Power function
To activate and deactivate the function.
4.3 Heat setting displays
The cooking zone is deactivated.
The cooking zone operates.
STOP+GO function operates.
Automatic Heat Up function operates.
Power function operates.
+ digit
There is a malfunction.
OptiHeat Control (3 step Residual heat indicator): continue cooking /
keep warm / residual heat.
Lock / The Child Safety Device function operates.
Incorrect or too small cookware or no cookware on the cooking zone.
Automatic Switch Off function operates.
4.4 OptiHeat Control (3 step
Residual heat indicator)
There is a risk of
burns from residual heat.
The indicator shows the level
of the residual heat.
The induction cooking zones make the
heat necessary for cooking process
directly in the bottom of the cookware.
The glass ceramic is heated by the heat
of the cookware.
The relation between the heat setting
and the time after which the hob
Refer to Safety chapters.
5.1 Activating and
Heat setting
for 1 second to activate or
deactivate the hob.
The control panel comes on after you
activate the hob and goes off after you
deactivate the hob. When the hob is
deactivated you can see only
5.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after
you activate the hob,
• you spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or
clean the control panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
• you use incorrect cookware. The
comes on and the cooking
zone deactivates automatically after 2
• you do not deactivate a cooking zone
or change the heat setting. After
some time
comes on and the hob
The hob deactivates after
6 hours
5 hours
4 hours
10 - 14
1.5 hour
5.3 The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat
setting or move your finger along the
control bar until you reach the correct
heat setting.
5.4 Using the cooking zones
Put the cookware on the cross / square
which is on the surface that you cook.
Cover the cross / square fully. Induction
cooking zones adapt to the dimension of
the bottom of the cookware
automatically. You can cook with the
large cookware on two cooking zones at
the same time.
5.5 Automatic Heat Up
To see the remaining time: set the
Activate this function to get a desired
heat setting in a shorter time. When it is
on, the zone operates on the highest
setting in the beginning and then
continues to cook at the desired heating
To activate the function for a cooking
( comes on).
zone: touch
Immediately touch a desired heat
comes on.
To deactivate the function: change the
heat setting.
5.6 Power function
This function makes more power
available to the induction cooking zones.
The function can be activated for the
induction cooking zone only for a limited
period of time. After this time the
induction cooking zone automatically
sets back to the highest heat setting.
Refer to “Technical
information” chapter.
To activate the function for a cooking
zone: touch
comes on.
To deactivate the function: change the
heat setting.
5.7 Timer
Count Down Timer
You can use this function to set how long
the cooking zone should operate for a
single cooking session.
First set the heat setting for the cooking
zone then set the function.
To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
To activate the function: touch
the timer to set the time (00 - 99
cooking zone with . The indicator of
the cooking zone starts to flash quickly.
The display shows the remaining time.
To change the time: set the cooking
zone with
. Touch
To deactivate the function: set the
To activate the function the
cooking zone must be cold.
setting. After 5 seconds
minutes). When the indicator of the
cooking zone starts to flash slowly the
time counts down.
and touch . The
cooking zone with
remaining time counts back to 00. The
indicator of the cooking zone goes out.
When the time comes to an
end, the sound operates and
00 flashes. The cooking zone
To stop the sound: touch
CountUp Timer (The count up timer)
You can use this function to monitor how
long the cooking zone operates.
To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
To activate the function: touch
the timer.
comes on. When the
indicator of the cooking zone starts to
flash slowly the time counts up. The
display switches between
counted time (minutes).
To see how long the cooking zone
operates: set the cooking zone with .
The indicator of the cooking zone starts
to flash quickly. The display shows how
long the zone operates.
To deactivate the function: set the
cooking zone with
and touch
. The indicator of the cooking zone
goes out.
Minute Minder
You can use this function as a Minute
Minder when the hob is activated and
the cooking zones do not operate. The
heat setting display shows
To activate the function: touch
To deactivate the function: activate the
. Do not set the heat setting.
of the timer to set the
time. When the time comes to an end,
the sound operates and 00 flashes.
hob with
To stop the sound: touch
To override the function for only one
for 4 seconds.
comes on.
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, you cannot
change the heat setting.
The function does not stop the timer
To deactivate the function: touch .
The previous heat setting comes on.
5.9 Lock
You can lock the control panel while
cooking zones operate. It prevents an
accidental change of the heat setting.
deactivate the hob with
operates again.
Deactivate the hob. Touch
for 3
seconds. The display comes on and goes
out. Touch
for 3 seconds.
- the sounds are off
- the sounds are on
To confirm your selection wait until the
hob deactivates automatically.
To activate the function: touch .
comes on for 4 seconds. The Timer stays
When you deactivate the
hob, you also deactivate this
5.10 The Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: activate the
. Do not set the heat setting.
for 4 seconds.
Deactivate the hob with
comes on.
comes on. Touch
of the timer to
choose one of the following:
When the function is set to
hear the sounds only when:
To deactivate the function: touch .
The previous heat setting comes on.
the function
5.11 OffSound Control
(Deactivating and activating
the sounds)
Set the heat setting first.
hob with
comes on. Touch
for 4 seconds.
Set the heat setting in 10 seconds. You
can operate the hob. When you
To activate the function: touch
comes on.
Deactivate the hob with
cooking time: activate the hob with
The function has no effect
on the operation of the
cooking zones.
you can
you touch
Minute Minder comes down
Count Down Timer comes down
you put something on the control
5.12 Power management
• Cooking zones are grouped
according to the location and number
of the phases in the hob. See the
• Each phase has a maximum electricity
loading of 3700 W.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking
zones connected to a single phase
exceeds 3700 W.
• The function decreases the power to
the other cooking zones connected to
the same phase.
• The heat setting display of the
reduced zones changes between two
Refer to Safety chapters.
6.1 Cookware
For induction cooking zones
a strong electro-magnetic
field creates the heat in the
cookware very quickly.
Use the induction cooking
zones with correct cookware.
Cookware material
• correct: cast iron, steel, enamelled
steel, stainless steel, the bottom
made of multi-layer (with correct mark
from a manufacturer).
• not correct: aluminium, copper,
brass, glass, ceramic, porcelain.
Cookware is correct for an induction
hob if:
• some water boils very quickly on a
zone set to the highest heat setting.
• a magnet pulls on to the bottom of
the cookware.
The bottom of the cookware
must be as thick and flat as
Cookware dimensions
Induction cooking zones adapt to the
dimension of the bottom of the
cookware automatically to some limit.
The cooking zone efficiency is related to
the diameter of the cookware. The
cookware with a smaller diameter than
the minimum receives only a part of the
power generated by the cooking zone.
Refer to “Technical
information” chapter.
6.2 The noises during
If you can hear:
• crack noise: cookware is made of
different materials (sandwich
• whistle sound: you use the cooking
zone with high power level and the
cookware is made of different
materials (sandwich construction).
• humming: you use high power level.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer
to hob malfunction.
6.3 Öko Timer (Eco Timer)
To save energy, the heater of the
cooking zone deactivates before the
count down timer sounds. The difference
in the operation time depends on the
heat setting level and the length of the
cooking operation.
6.4 Examples of cooking
The relation between the heat setting
and the cooking zone consumption of
power is not linear. When you increase
the heat setting, it is not proportional to
the increase of the cooking zone
consumption of power. It means that the
cooking zone with the medium heat
setting uses less than a half of its power.
The data in the table is for
guidance only.
Heat setting
Use to:
Keep cooked food warm.
as necessary
Put a lid on the cookware.
Hollandaise sauce, melt: butter, chocolate, gelatine.
5 - 25
Mix from time to time.
Solidify: fluffy omelettes,
baked eggs.
10 - 40
Cook with a lid on.
Simmer rice and milkbased
dishes, heating up readycooked meals.
25 - 50
Add the minimum twice as
much liquid as rice, mix milk
dishes part procedure
Steam vegetables, fish, meat.
20 - 45
Add some tablespoons of liquid.
Steam potatoes.
20 - 60
Use max. ¼ l water for 750 g of
Cook larger quantities of food, 60 - 150
stews and soups.
Up to 3 l liquid plus ingredients.
9 - 12
Gentle fry: escalope, veal cordon bleu, cutlets, rissoles,
sausages, liver, roux, eggs,
pancakes, doughnuts.
as necessary
Turn halfway through.
12 - 13
Heavy fry, hash browns, loin
steaks, steaks.
5 - 15
Turn halfway through.
Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.
Boil large quantities of water. Power function is activated.
Refer to Safety chapters.
• Use a special cleaner applicable for
the surface of the hob.
• Use a special scraper for the glass.
7.1 General information
7.2 Cleaning the hob
• Clean the hob after each use.
• Always use cookware with clean
• Scratches or dark stains on the surface
have no effect on how the hob
• Remove immediately: melted plastic,
plastic foil, sugar and food with sugar.
If not, the dirt can cause damage to
the hob. Take care to avoid burns. Put
the special scraper on the glass
surface at an acute angle and move
the blade on the surface.
• Remove when the hob is sufficiently
cool: limescale rings, water rings, fat
stains, shiny metallic discoloration.
Clean the hob with a moist cloth and
non-abrasive detergent. After
cleaning, wipe the hob dry with a soft
• Remove shiny metallic
discoloration: use a solution of water
with vinegar and clean the glass
surface with a moist cloth.
Refer to Safety chapters.
8.1 What to do if...
Possible cause
You cannot activate or oper- The hob is not connected to
ate the hob.
an electrical supply or it is
connected incorrectly.
The fuse is blown.
Check if the hob is correctly
connected to the electrical
supply. Refer to the connection diagram.
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a qualified electrician.
Activate the hob again and
set the heat setting in less
than 10 seconds.
You touched 2 or more sensor fields at the same time.
Touch only one sensor field.
STOP+GO function operates.
Refer to "Daily use" chapter.
There is water or fat stains
on the control panel.
Clean the control panel.
An acoustic signal sounds
You put something on one
and the hob deactivates.
or more sensor fields.
An acoustic signal sounds
when the hob is deactivated.
Remove the object from the
sensor fields.
The hob deactivates.
Remove the object from the
sensor field.
You put something on the
sensor field
Residual heat indicator does
not come on.
The zone is not hot because If the zone operated suffiit operated only for a short
ciently long to be hot, speak
to an Authorised Service
Possible cause
Automatic Heat Up function
does not operate.
The zone is hot.
Let the zone become sufficiently cool.
The highest heat setting is
The highest heat setting has
the same power as the function.
The heat setting changes
between two levels.
Power management function Refer to "Daily use" chapter.
The sensor fields become
The cookware is too large or Put large cookware on the
you put it too near to the
rear zones if possible.
There is no signal when you
touch the panel sensor
The signals are deactivated.
Activate the signals.
Refer to "Daily use" chapter.
comes on.
Automatic Switch Off operates.
Deactivate the hob and activate it again.
comes on.
The Child Safety Device or
the Lock function operates.
Refer to "Daily use" chapter.
comes on.
There is no cookware on the
Put cookware on the zone.
The cookware is incorrect.
Use the correct cookware.
Refer to “Hints and tips”
The diameter of the bottom
of the cookware is too small
for the zone.
Use cookware with correct
Refer to “Technical information” chapter.
The cookware does not cover the cross / square.
Cover the cross / square
There is an error in the hob.
Disconnect the hob from the
electrical supply for some
time. Disconnect the fuse
from the electrical system of
the house. Connect it again.
and a number come on.
comes on again, speak
to an Authorised Service
comes on.
The electrical connection is
Speak to a qualified electriincorrect. The supply voltage cian to check the installation.
is out of range.
Possible cause
comes on.
There is an error in the hob
because a cookware boiled
dry. Automatic Switch Off
and the overheating protection for the zones operate.
Deactivate the hob. Remove
the hot cookware. After approximately 30 seconds, activate the zone again. If the
cookware was the problem,
the error message goes out.
Residual heat indicator can
stay on. Let the cookware
become sufficiently cool.
Check if your cookware is
compatible with the hob.
Refer to “Hints and tips”
comes on.
The cooling fan is blocked.
Check if objects block the
cooling fan. If
comes on
again, speak to an Authorised Service Centre.
comes on.
The electrical connection is
incorrect. The hob is connected only to one phase.
8.2 If you cannot find a
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Give also
three digit letter code for the glass
ceramic (it is in the corner of the glass
Speak to a qualified electrician to check the installation.
Refer to the connection diagram.
surface) and an error message that
comes on. Make sure, you operated the
hob correctly. If not the servicing by a
service technician or dealer will not be
free of charge, also during the warranty
period. The instructions about the
Service Centre and conditions of
guarantee are in the guarantee booklet.
Refer to Safety chapters.
9.1 Before the installation
Before you install the hob, write down
the information bellow from the rating
plate. The rating plate is on the bottom
of the hob.
Serial number ...........................
9.2 Built-in hobs
Only use the built-in hobs after you
assemble the hob into correct built-in
units and work surfaces that align to the
9.3 Connection cable
• The hob is supplied with a connection
• To replace the damaged mains cable
use the following (or higher) mains
cable type: H05V2V2-F T min 90°C.
Speak to your local Service Centre.
9.4 Attaching the seal
1. Clean the worktop around the cut
out area.
2. Attach the supplied seal stripe to the
lower edge of the hob along the
outer edge of the glass ceramic. Do
not extend it. Make sure that the
ends of the seal stripe are located in
the middle of one side of the hob.
3. Add some mm when you cut the seal
stripe to the length.
4. Push the two ends of seal stripe
9.5 Assembly
min. 2 mm
min. 2 mm
57 mm
41 mm
31 mm
> 20 mm
min. 500 mm
12 mm
28 mm
38 mm
< 20 mm
30 mm
min. 500 mm
12 mm
28 mm
38 mm
57 mm
41 mm
31 mm
38 mm
2 mm
R 5 mm
380+1 mm 880
12 mm
2 mm
55 ±1mm
10.1 Rating plate
Model HK973500FB
Typ 60 GCD E2 AU
Induction 6.9 kW
Ser.Nr. .................
PNC 949 595 266 01
220 - 240 V 50 - 60 Hz
Made in Germany
6.9 kW
10.2 Cooking zones specification
Cooking zone
Nominal power Power function
(maximum heat [W]
setting) [W]
Power function Cookware diammaximum dura- eter [mm]
tion [min]
Left rear
125 - 210
Middle rear
125 - 210
Right rear
125 - 210
The power of the cooking zones can be
different in some small range from the
data in the table. It changes with the
material and dimensions of the
For optimal cooking results use
cookware not larger than the diameter in
the table.
11.1 Product information according to EU 66/2014
Model identification
Type of hob
Built-In Hob
Number of cooking zones
Heating technology
Diameter of circular cooking zones (Ø)
Left rear
Middle rear
Right rear
21.0 cm
21.0 cm
21.0 cm
Energy consumption per
cooking zone (EC electric
Left rear
Middle rear
Right rear
174.9 Wh / kg
172.6 Wh / kg
178.3 Wh / kg
Energy consumption of the
hob (EC electric hob)
EN 60350-2 - Household electric cooking
appliances - Part 2: Hobs - Methods for
measuring performance
175.3 Wh / kg
11.2 Energy saving
You can save energy during everyday
cooking if you follow below hints.
• When you heat up water, use only the
amount you need.
• If it is possible, always put the lids on
the cookware.
• Before you activate the cooking zone
put the cookware on it.
• Put the smaller cookware on the
smaller cooking zones.
• Put the cookware directly in the
centre of the cooking zone.
• Use the residual heat to keep the
food warm or to melt it.
This document sets out the terms and
conditions of the product warranties
for AEG Appliances. It is an important
document. Please keep it with your
proof of purchase documents in a safe
place for future reference should you
require service for your Appliance.
1. In this warranty
a) ‘acceptable quality’ as referred to
in clause 10 of this warranty has
the same meaning referred to in
the ACL;
b) ‘ACL’ means Schedule 2 to the
Competition and Consumer Act
c) ‘Appliance’ means any AEG
product purchased by you and
accompanied by this document;
d) ‘ASC’ means AEG authorised
service centres;
e) AEG is the brand controlled by
Electrolux Home Products Pty
Ltd of 163 O’Riordan Street,
Mascot NSW 2020, ABN 51 004
762 341 in respect of Appliances
purchased in Australia and
Electrolux (NZ) Limited
(collectively ‘Electrolux’) of 3-5
Niall Burgess Road, Mount
Wellington, in respect of
Appliances purchased in New
f) ‘major failure’ as referred to in
clause 10 of this warranty has the
same meaning referred to in the
ACL and includes a situation
when an Appliance cannot be
repaired or it is uneconomic for
Electrolux, at its discretion, to
repair an Appliance during the
Warranty Period;
g) ‘Warranty Period’ means the
Appliance is warranted against
manufacturing defects in
Australia and New Zealand for 60
months, following the date of
original purchase of the
h) ‘you’ means the purchaser of the
Appliance not having purchased
the Appliance for re-sale, and
‘your’ has a corresponding
This warranty only applies to
Appliances purchased and used in
Australia or New Zealand in normal
domestic applications and is in
addition to (and does not exclude,
restrict, or modify in any way) any
non-excludable statutory warranties
in Australia or New Zealand.
During the Warranty Period
Electrolux or its ASC will, at no extra
charge if your Appliance is readily
accessible for service, without special
equipment and subject to these
terms and conditions, repair or
replace any parts which it considers
to be defective. Electrolux or its ASC
may use remanufactured parts to
repair your Appliance. You agree that
any replaced Appliances or parts
become the property of Electrolux.
This warranty does not apply to light
globes, batteries, filters or similar
perishable parts.
Parts and Appliances not supplied by
Electrolux are not covered by this
To the extent permitted by law, you
will bear the cost of transportation,
travel and delivery of the Appliance
to and from Electrolux or its ASC. If
you reside outside of the service
area, you will bear the cost of:
a) travel of an authorised
b) transportation and delivery of the
Appliance to and from Electrolux
or its ASC.
In all instances, unless the Appliance
is transported by Electrolux or an
AEG authorised representative, the
Appliance is transported at the
owner’s cost and risk while in transit
to and from Electrolux or its ASC.
6. Proof of purchase is required before
you can make a claim under this
7. You may not make a claim under this
warranty unless the defect claimed is
due to faulty or defective parts or
workmanship. Electrolux is not liable
in the following situations (which are
not exhaustive):
a) the Appliance is damaged by:
– accident
– misuse or abuse, including
failure to properly maintain or
– normal wear and tear
– power surges, electrical storm
damage or incorrect power
– incomplete or improper
– incorrect, improper or
inappropriate operation
– insect or vermin infestation
– failure to comply with any
additional instructions
supplied with the Appliance;
b) the Appliance is modified
without authority from Electrolux
in writing;
c) the Appliance’s serial number or
warranty seal has been removed
or defaced;
d) the Appliance was serviced or
repaired by anyone other than
Electrolux, an authorised repairer
or ASC.
8. This warranty, the contract to which it
relates and the relationship between
you and Electrolux are governed by
the law applicable where the
Appliance was purchased. Where the
Appliance was purchased in New
Zealand for commercial purposes the
Consumer Guarantee Act does not
9. To the extent permitted by law and
subject to your non-excludable
statutory rights and warranties, AEG
excludes all warranties and liabilities
(other than as contained in this
document) including liability for any
loss or damage whether direct or
indirect arising from your purchase,
use or non use of the Appliance.
10. For AEG Appliances and services in
Australia, the Appliances come with a
guarantee that cannot be excluded
under the ACL. You are entitled to a
replacement or refund for a major
failure and for compensation for any
other reasonably foreseeable loss or
damage. You are also entitled to
have the Appliance repaired or
replaced if the Appliance fails to be
of acceptable quality and the failure
does not amount to a major failure.
The benefits to you given by this
warranty are in addition to your other
rights and remedies under a law in
relation to the Appliances or services
to which the warranty relates.
11. At all times during the Warranty
Period, Electrolux shall, at its
discretion, determine whether repair,
replacement or refund will apply if an
Appliance has a valid warranty claim
applicable to it.
12. For Appliances and services provided
in New Zealand, the Appliances
come with a guarantee pursuant to
the provisions of the Consumer
Guarantees Act, the Sale of Goods
Act and the Fair Trading Act.
13. To enquire about claiming under this
warranty, please follow these steps:
a) carefully check the operating
instructions, user manual and the
terms of this warranty;
b) have the model and serial
number of the Appliance
c) have the proof of purchase (e.g.
an invoice) available;
d) telephone the numbers shown
14. You accept that if you make a
warranty claim, Electrolux and its
ASC may exchange information in
relation to you to enable Electrolux
to meet its obligations under this
Important Notice
Before calling for service, please ensure that the steps listed in clause 13 above have been
or to find the address of your nearest state service centre in Australia
PLEASE CALL 1300 363 664
OR EMAIL [email protected]
For the cost of a local call (Australia only)
or to find the address of your nearest state spare parts centre in Australia
PLEASE CALL 13 13 50
OR EMAIL [email protected]
For the cost of a local call (Australia only)
or to find the address of your nearest authorised service centre in New Zealand
FREE CALL 0800 10 66 10
OR EMAIL [email protected]
(New Zealand only)
or to find the address of your nearest state spare parts centre in New Zealand
FREE CALL 0800 10 66 20
OR EMAIL [email protected]
(New Zealand only)
Recycle the materials with the symbol .
Put the packaging in applicable
containers to recycle it. Help protect the
environment and human health and to
recycle waste of electrical and electronic
appliances. Do not dispose appliances
marked with the symbol with the
household waste. Return the product to
your local recycling facility or contact
your municipal office.


Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF