Zanussi | ZEI6640XBA | User manual | ZANUSSI ZEI6640XBA User Manual

EN
User manual
Hob
ZEI6640XBA
Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2
Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3
Product description _ _ _ _ _ _ _ _ _ _ _ _ _ 5
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6
Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ 8
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ 10
Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Technical information _ _ _ _ _ _ _ _ _ _ _ _
Environment concerns _ _ _ _ _ _ _ _ _ _ _
GREAT BRITAIN & IRELAND - Guarantee/
Customer Service _ _ _ _ _ _ _ _ _ _ _ _ _ _
European Guarantee _ _ _ _ _ _ _ _ _ _ _ _
12
14
15
15
16
Subject to change without notice.
Safety information
Before the installation and use of the appliance, carefully read the
supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always
keep the instructions with the appliance for future reference.
Children and vulnerable people safety
Warning! Risk of suffocation, injury or permanent disability.
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they are supervised by an adult or a person who is responsible for their safety.
• Do not let children play with the appliance.
• Keep all packaging away from children.
• Keep children and pets away from the appliance when it operates
or when it cools down. Accessible parts are hot.
• If the appliance has a child safety device, we recommend that you
activate it.
• Cleaning and user maintenance shall not be made by children
without supervision.
General Safety
• The appliance and its accessible parts become hot during use.
Do not touch the heating elements.
2
www.zanussi.com
• Do not operate the appliance by means of an external timer or
separate remote-control system.
• Unattended cooking on a hob with fat or oil can be dangerous
and may result in fire.
• Never try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket.
• Do not store items on the cooking surfaces.
• Do not use a steam cleaner to clean the appliance.
• Metallic objects such as knives, forks, spoons and lids should not
be placed on the hob surface since they can get hot.
• If the glass ceramic surface is cracked, switch off the appliance to
avoid the possibility of electric shock.
• After use, switch off the hob element by its control and do not rely
on the pan detector.
Safety instructions
Installation
Warning! Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied
with the appliance.
• Keep the minimum distance from the other
appliances and units.
• Always be careful when you move the appliance because it is heavy. Always wear safety
gloves.
• Seal the cut surfaces with a sealant to prevent moisture to cause swelling.
• Protect the bottom of the appliance from
steam and moisture.
• Do not install the appliance adjacent to a
door or under a window. This prevents hot
cookware to fall from the appliance when the
door or the window is opened.
www.zanussi.com
• If the appliance is installed above drawers
make sure that the space, between the bottom of the appliance and the upper drawer,
is sufficient for air circulation.
• Make sure that the ventilation space of 2 mm,
between the worktop and the front of the below unit, is free. The warranty does not cover
damages caused by the lack of an adequate
ventilation space.
• The bottom of the appliance can get hot. We
recommend to install a non-combustile separation panel under the appliance to prevent
access to the bottom.
Electrical connection
Warning! Risk of fire and electrical shock.
• All electrical connections must be made by a
qualified electrician.
• The appliance must be earthed.
• Before carrying out any operation make sure
that the appliance is disconnected from the
power supply.
3
• Use the correct electricity mains cable.
• Do not let the electricity mains cable tangle.
• Make sure the mains cable or plug (if applicable) does not touch the hot appliance or
hot cookware, when you connect the appliance to the near sockets
• Make sure the appliance is installed correctly. Loose and incorrect electricity mains cable or plug (if applicable) can make the terminal become too hot.
• Make sure that a shock protection is installed.
• Use the strain relief clamp on cable.
• Make sure not to cause damage to the mains
plug (if applicable) or to the mains cable.
Contact the Service or an electrician to
change a damaged mains cable.
• The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening
width of minimum 3 mm.
• Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips
and contactors.
Use
Warning! Risk of injury, burns or electric
shock.
• Use this appliance in a household environment.
• Do not change the specification of this appliance.
• Do not use an external timer or a separate remote-control system to operate the appliance.
• Do not let the appliance stay unattended
during operation.
• Do not operate the appliance with wet hands
or when it has contact with water.
• Do not put cutlery or saucepan lids on the
cooking zones. They can become hot.
• Set the cooking zone to “off” after each use.
Do not rely on the pan detector.
4
• Do not use the appliance as a work surface
or as a storage surface.
• If there is a crack on the surface, disconnect
power supply to prevent the electrical shock.
• Users with a pacemaker must keep a distance of minimum 30 cm from the induction
cooking zones when the appliance is in operation.
Warning! Risk of fire or explosion.
• Fats and oil when heated can release flammable vapours. Keep flames or heated objects away from fats and oils when you cook
with them.
• The vapours that very hot oil releases can
cause spontaneous combustion.
• Used oil, that can contain food remnants, can
cause fire at a lower temperature than oil
used for the first time.
• Do not put flammable products or items that
are wet with flammable products in, near or
on the appliance.
• Do not try to extinguish a fire with water. Disconnect the appliance and cover the flame
with a lid or a fire blanket.
Warning! Risk of damage to the
appliance.
• Do not keep hot cookware on the control
panel.
• Do not let cookware to boil dry.
• Be careful not let objects or cookware fall on
the appliance. The surface can be damaged.
• Do not activate the cooking zones with empty cookware or without cookware.
• Do not put aluminium foil on the appliance.
• Cookware made of cast iron, aluminium or
with a damaged bottom can cause scratches
on the glass ceramic. Always lift these objects up when you have to move them on the
cooking surface.
Care and Cleaning
Warning! Risk of damage to the
appliance.
www.zanussi.com
• Clean regularly the appliance to prevent the
deterioration of the surface material.
• Do not use water spray and steam to clean
the appliance.
• Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads,
solvents or metal objects.
Warning! Risk of injury or suffocation.
• Contact your municipal authority for information on how to discard the appliance correctly.
• Disconnect the appliance from the mains
supply.
• Cut off the mains cable and discard it.
Disposal
Product description
General overview
1
2
180
180
mm
1 Induction cooking zone
2 Induction cooking zone
210
145
3 Induction cooking zone
4 Control panel
mm
mm
mm
3
5 Induction cooking zone
5
4
Control panel layout
1
2
3
4
5
9
6
7
8
Use the sensor fields to operate the appliance. The displays,
indicators and sounds tell which functions operate.
Sensor field
1
www.zanussi.com
Function
To activate and deactivate the appliance.
5
Sensor field
Function
2
To lock / unlock the control panel.
3
To activate the Power function.
4
A heat setting display.
To show the heat setting.
5
Timer indicators of cooking zone.
To show for which zone you set the time.
6
The timer display.
To show the time in minutes.
7
/
To increase or decrease the heat setting.
8
/
To increase or decrease the time.
To select a cooking zone.
9
Heat setting displays
Display
Description
The cooking zone is deactivated.
The Keep Warm function operates.
The cooking zone operates.
-
The Automatic Heat-up function operates.
The cookware is incorrect or too small, or there is no cookware on the cooking zone.
There is a malfunction.
A cooking zone is still hot (residual heat).
The Lock / The Child Safety Device operates.
The Power function operates.
The Automatic Switch-Off operates.
Residual heat indicator
Warning!
The risk of burns from
residual heat!
The induction cooking zones make the heat
necessary for cooking directly in the bottom of
the cookware. The glass ceramic is hot from
the heat of the cookware.
Daily use
Activation and deactivation
Touch
for 1 second to activate or deactivate
the appliance.
Automatic Switch Off
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated (
).
6
• You do not set the heat setting after you activate the appliance.
• You spill something or put something on the
control panel for more than 10 seconds, (a
pan, a cloth, etc.). An acoustic signal sounds
some time and the appliance deactivates.
Remove the object or clean the control panel.
www.zanussi.com
• The appliance becomes too hot (e.g. when, a
saucepan boils dry). Before you use the appliance again, the cooking zone must be
cool.
• You use incorrect cookware. The symbol
comes on and the cooking zone deactivates
automatically after 2 minutes.
• You do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the appliance deactivates.
See below.
• The relation between heat setting and times
of the Automatic Switch Off function:
•
,
— 6 hours
•
-
11
10
9
8
7
6
5
4
3
2
1
0
1
2
3
4
5
6
7
8
9
— 5 hours
•
— 4 hours
•
-
— 1.5 hours
The heat setting
to increase the heat setting. Touch
Touch
to decrease the heat setting. The display
and
at the
shows the heat setting. Touch
same time to deactivate the cooking zone.
Automatic Heat Up
You can get a necessary heat setting in a
shorter time if you activate the Automatic Heat
Up function. This function sets the highest heat
setting for some time (see the diagram), and
then decreases to the necessary heat setting.
To start the Automatic Heat Up function for a
cooking zone:
1. Touch
. The symbol
comes on in the
display.
2. Immediately touch
. The symbol
comes on in the display.
3. Immediately touch
again and again until
the necessary heat setting comes on. After
comes on in the display.
3 seconds
.
To stop the function, touch
www.zanussi.com
Power function
The Power function makes more power available to the induction cooking zones. The Power
function can be activated for a limited period of
time ( see Technical Information chapter). After
that, the induction cooking zone automatically
sets back to highest heat setting. To activate,
,
comes on. To deactivate, touch
touch
or
.
Power management
The power management divides the power between two cooking zones in a pair (see the illustration). The power function increases the
power to the maximum level for one cooking
zone in the pair. The power in the second cooking zone automatically decreases. The heat setting display for the reduced zone changes between two levels.
7
Timer
Count Down Timer
Use the Count Down Timer to set how long the
cooking zone operates for only this one time.
Set the Timer after the selection of the
cooking zone.
You can set the heat setting before or after you
set the timer.
• To set the cooking zone: touch
again
and again until the indicator of a necessary
cooking zone comes on.
• To activate or change the Timer: touch
or
of the timer to set the time ( 00 99 minutes). When the indicator of the
cooking zone starts to flash slow, the time
counts down.
• To deactivate the Timer: set the cooking
and touch
to deactivate the
zone with
Timer. The remaining time counts back to 00
. The indicator of the cooking zone goes out.
• To see the remaining time: set the cook. The indicator of the cooking zone with
ing zone starts to flash quickly. The display
shows the remaining time.
When the time comes to an end, the sound operates and 00 flashes. The cooking zone deactivates.
• To stop the sound: touch
Minute Minder
You can use the Timer as a Minute Minder
while the cooking zones do not operate. Touch
. Touch
or
to set the time. When the
time comes to an end, the sound operates and
00 flashes
• To stop the sound: touch
First set the heat setting.
. The symbol
To start this function touch
comes on for 4 seconds.
The Timer stays on.
. The heat setTo stop this function touch
ting that you set before comes on.
When you stop the appliance, you also stop
this function.
The Child Safety Device
This function prevents an accidental operation
of the appliance.
To activate The Child Safety Device
• Activate the appliance with
. Do not set
the heat settings.
• Touch
for 4 seconds. The symbol
comes on.
• Deactivate the appliance with
.
To deactivate The Child Safety Device
• Activate the appliance with
. Do not set
for 4 seconds.
the heat settings. Touch
comes on.
The symbol
• Deactivate the appliance with
.
To override The Child Safety Device for
only one cooking time
• Activate the appliance with
. The symbol
comes on.
• Touch
for 4 seconds. Set the heat setting in 10 seconds. You can operate the
appliance.
• When you deactivate the appliance with
,
The Child Safety Device operates again.
Lock
When the cooking zones operate, you can lock
. It prevents an acthe control panel, but not
cidental change of the heat setting.
Helpful hints and tips
INDUCTION COOKING ZONES
8
For induction cooking zones a strong electromagnetic field creates the heat in the cookware
very quickly.
www.zanussi.com
Cookware for induction cooking zones
Important! Use the induction cooking zones
with correct cookware.
Cookware material
• correct: cast iron, steel, enamelled steel,
stainless steel, the bottom made of multi-layer (with correct mark from a manufacturer).
• not correct: aluminium, copper, brass,
glass, ceramic, porcelain.
Cookware is correct for an induction hob
if …
• ... some water boils very quickly on a zone
set to the highest heat setting.
• ... a magnet pulls on to the bottom of the
cookware.
The bottom of the cookware must be
as thick and flat as possible.
Cookware dimensions: induction cooking
zones adapt to the dimension of the bottom of
the cookware automatically to some limit.
The noises during operation
If you can hear
• crack noise: cookware is made of different
materials (Sandwich construction).
• whistle sound: you use one or more cooking
zones with high power levels and the cookware is made of different materials (Sandwich construction).
• humming: you use high power levels.
Hea
t
setting
Use to:
Time
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer to
appliance malfunction.
Energy saving
How to save energy
• If it is possible, always put the lids on the
cookware.
• Put cookware on a cooking zone before you
start it.
• Use the residual heat to keep the food warm
or to melt it.
The cooking zone efficiency
The cooking zone efficiency is related to the diameter of the cookware. The cookware with a
smaller diameter than the minimum receives only a part of the power generated by the cooking
zone. For the minimum diameters see the Technical Information chapter.
The Examples of cooking applications
The relation between the heat setting and the
cooking zone consumption of power is not linear.
When you increase the heat setting it is not
proportional to the increase of the cooking zone
consumption of power.
It means that the cooking zone with the medium
heat setting uses less than a half of its power.
The data in the table is for guidance only.
Hints
Nominal power consumption
Keep warm the food you
cooked
as required
Put a lid on a cookware
3%
1-2
Hollandaise sauce, melt: butter, chocolate, gelatine
5 - 25 min
Mix from time to time
3–5%
1-2
Solidify: fluffy omelettes, baked
eggs
10 - 40 min
Cook with a lid on
3–5%
1
www.zanussi.com
9
Hea
t
setting
Use to:
Time
Hints
Nominal power consumption
2-3
Simmer rice and milkbased
dishes, heating up readycooked meals
25 - 50 min
Add the minimum twice as
much liquid as rice, mix milk
dishes part procedure
through
5 – 10 %
3-4
Steam vegetables, fish, meat
20 - 45 min
Add some tablespoons of
liquid
10 – 15 %
4-5
Steam potatoes
20 - 60 min
Use max. ¼ l water for 750 g
of potatoes
15 – 21 %
4-5
Cook larger quantities of food,
stews and soups
60 - 150 min
Up to 3 l liquid plus ingredients
15 – 21 %
6-7
Gentle fry: escalope, veal cordon bleu, cutlets, rissoles,
sausages, liver, roux, eggs,
pancakes, doughnuts
as necessary
Turn halfway through
31 – 45 %
7-8
Heavy fry, hash browns, loin
steaks, steaks
5 - 15 min
Turn halfway through
45 – 64 %
9
Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips
100 %
Boil large quantities of water. Power function is activated.
Care and cleaning
Clean the appliance after each use.
Always use cookware with clean bottom.
Scratches or dark stains on the glass-ceramic cause no effect on how the appliance operates.
To remove the dirt:
1. – Remove immediately: melted plastic,
plastic foil, and food with sugar. If not,
the dirt can cause damage to the appliance. Use a special scraper for the
glass . Put the scraper on the glass sur-
2.
3.
face at an acute angle and move the
blade on the surface .
– Remove after the appliance is sufficiently cool: limescale rings , water
rings, fat stains, shiny metallic discolorations. Use a special cleaning agent for
glass ceramic or stainless steel.
Clean the appliance with a moist cloth and
some detergent.
At the end rub the appliance dry with a
clean cloth.
Troubleshooting
Problem
Possible cause
You cannot activate the appliance
or operate it.
Activate the appliance again and
set the heat setting in less than 10
seconds.
You touched 2 or more sensor
fields at the same time.
10
Remedy
Touch only one sensor field.
www.zanussi.com
Problem
Possible cause
Remedy
There is water or fat stains on the
control panel.
Clean the control panel.
An acoustic signal sounds and the
appliance deactivates.
An acoustic signal sounds when
the appliance is deactivated.
You put something on one or
more sensor fields.
Remove the object from the sensor
fields.
The appliance deactivates.
You put something on the sensor
field
.
Remove the object from the sensor
field.
The residual heat indicator does
not come on.
The cooking zone is not hot because it operated only for a short
time.
If the cooking zone operated sufficiently long to be hot, speak to the
service centre.
The heat setting changes between
two levels.
The Power management is activated.
Refer to “Power management”.
The sensor fields become hot.
The cookware is too large or you
put it too near to the controls.
Put large cookware on the rear
cooking zones if necessary.
comes on.
The Automatic Switch Off operates.
Deactivate the appliance and activate it again.
comes on.
The Child Safety Device or the
Lock function operates.
Refer to the chapter “Daily Use”.
comes on.
No cookware is on the cooking
zone.
Put cookware on the cooking zone.
The cookware is incorrect.
Use the correct cookware.
The diameter of the bottom of the
cookware is too small for the
cooking zone.
Move cookware to a smaller cooking zone.
There is an error in the appliance.
Disconnect the appliance from the
electrical supply for some time.
Disconnect the fuse from the electrical system of the house. Connect
it again. If
comes on again,
speak to the service centre.
There is an error in the appliance
because a cookware boils dry.
The overheating protection for the
cooking zones and the Automatic
Switch Off operate.
Deactivate the appliance. Remove
the hot cookware. After, approximately 30 seconds, activate the
cooking zone again. If the cookware was the problem, the error
message goes out of the display,
but the residual heat indicator can
stay. Let the cookware become
sufficiently cool and refer to
“Cookware for the induction cooking zone” to see if your cookware
is compatible with the appliance.
and a number come on.
comes on.
If you tried the above solutions and cannot repair the problem, speak to your dealer or the
customer service. Give the data from the rating
www.zanussi.com
plate, three digit letter code for the glass ceramic (it is in the corner of the glass surface)
and an error message that comes on.
11
Make sure, you operated the appliance correctly. If not the servicing by a customer service
technician or dealer will not be free of charge,
also during the warranty period. The instructions about the customer service and conditions of guarantee are in the guarantee booklet.
Installation
Warning! Refer to the Safety chapters.
Before the installation
Before the installation of the appliance, record
the information below from the rating plate. The
rating plate is on the bottom of the appliance
casing.
• Model ...........................
• PNC .............................
• Serial number ....................
units and work surfaces that align to the
standards.
Connection cable
• Use the correct mains cable of type H05BBF Tmax 90°C (or higher) for a single phase or
two phase connection.
• Replace the damaged mains cable with a
special cable (type H05BB-F Tmax 90°C or
higher). Speak to your local Service Centre.
Built-in appliances
• Only use the built-in appliances after you assemble the appliance into correct built-in
Assembly
min.
500mm
min.
50mm
min.
2mm
12
www.zanussi.com
B
A
min. 2 mm
B
A
min. 2 mm
> 20 mm
< 20 mm
min. 500 mm
B
A
12 mm 57 mm
28 mm 41 mm
38 mm 31 mm
min
30 mm
min. 500 mm
B
A
12 mm 57 mm
28 mm 41 mm
38 mm 31 mm
min.
12 mm
R 5mm
min.
55mm
min.
2 mm
490+1mm 560+1mm
www.zanussi.com
13
min.
38 mm
min.
2 mm
If you use a protection box (an additional accessory1)), the front airflow space of 2 mm and
protective floor directly below the appliance are
not necessary.
You can not use the protection box if you install
the appliance above an oven.
1) The protection box accessory may not be available in some countries. Please contact your local supplier.
Technical information
Modell ZEI6640XBA
Prod.Nr. 949 595 535 01
Typ 58 GAD D5 AU
220 - 240 V 50 - 60 Hz
Induction 7,4 kW
Made in Germany
Ser.Nr. ..........
7,4 kW
ZANUSSI
Cooking zones power
14
www.zanussi.com
Cooking zone
Nominal Power
(Max heat setting) [W]
Right rear — 180
mm
1800 W
Right front — 145
mm
1400 W
Left rear — 180
mm
1800 W
Left front — 210
mm
2300 W
Power Function
activated [W]
Power function
maximum duration [min]
Minimum cookware diameter
[mm]
145
2500 W
4
125
145
3700 W
The power of the cooking zones can be different in some small range from the data in the ta-
10
180
ble. It changes with the material and dimensions of the cookware.
Environment concerns
The symbol on the product or on its
packaging indicates that this product may not
be treated as household waste. Instead it
should be taken to the appropriate collection
point for the recycling of electrical and
electronic equipment. By ensuring this product
is disposed of correctly, you will help prevent
potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. For more detailed
GB
IE
information about recycling of this product,
please contact your local council, your
household waste disposal service or the shop
where you purchased the product.
Packaging material
The packaging materials are friendly to the
environment and can be recycled. The
plastic components are identified by marking:
>PE<,>PS<, etc. Discard the packaging materials as household waste at the waste disposal
facilities in your municipality.
GREAT BRITAIN & IRELAND - Guarantee/Customer Service
Standard guarantee conditions:
We, Electrolux, undertake that if within 12
months of the date of the purchase this Electrolux appliance or any part thereof is proved to be
defective by reason only of faulty workmanship
or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour,
materials or carriage on condition that:
• Appliance has been correctly installed and
used only on the electricity supply stated on
the rating plate.
• Appliance has been used for normal domestic purposes only, in accordance with manufacturer's instructions.
www.zanussi.com
• Appliance hasn't been serviced, maintained,
repaired, taken apart or tampered with by
person not authorised by us.
• Electrolux Service Force Centre must undertake all service work under this guarantee
• Any appliance or defective part replaced
shall become the Company's property.
• This guarantee is in addition to your statutory
and other legal rights.
Exclusions
• Damage, calls resulting from transport, improper use, neglect, light bulbs, removable
parts of glass, plastic.
15
• Costs for calls to put right appliance which is
improperly installed, calls to appliances outside United Kingdom.
• Appliances found to be in use within a commercial environment, plus those which are
subject to rental agreements.
• Products of Electrolux manufacturer that are
not marketed by Electrolux
Service and Spare Parts.Please contact your
local Service Force Centre: 08445 616
616(Call will be routed to Service Force Centre
covering your postcode area). For address of
local Service Force Centre and further information, please visit: www.serviceforce.co.uk
Before calling out an engineer, please ensure
you have read the details under the heading
"What to do if... / Troubleshooting". When you
contact the Service Force Centre you will need
to give the following details: Your name, address and postcode, your telephone number,
clear concise details of the fault, model and serial number of the appliance (found on the rating plate), the purchase date. Please note a valid purchase receipt or guarantee documentation is required for in guarantee service calls.
Customer Care.Please contact our Customer
Care Department: Electrolux Major Appliances,
Addington Way, Luton, Bedfordshire, LU4
9QQ or visit our website at www.electrolux.co.uk
Customer
Care Department,
Tel: (Calls may be recorded for
training purposes)
Electrolux
08445 613 613
AEG-Electrolux
08445 611 611
ZanussiElectrolux
08445 612 612
For Customer Service in The Republic of
Ireland please contact us at the address
below:
Electrolux Group (Irl) Ltd, Long Mile Road,
Dublin 12, Republic of Ireland
Tel: +353 (0)1 4090751, Email: service.eid@electrolux.ie
European Guarantee
GB This appliance is guaranteed by Electrolux
in each of the countries listed at the back of
this user manual, for the period specified in the
appliance guarantee or otherwise by law. If you
move from one of these countries to another of
the countries listed, the appliance guarantee
will move with you subject to the following qualifications:• The appliance guarantee starts from the date
you first purchased the appliance which will
be evidenced by production of a valid purchase document issued by the seller of the
appliance.
• The appliance guarantee is for the same period and to the same extent for labour and
parts as exists in your new country of resi-
16
dence for this particular model or range of
appliances.
• The appliance guarantee is personal to the
original purchaser of the appliance and cannot be transferred to another user.
• The appliance is installed and used in accordance with instructions issued by Electrolux and is only used within the home, i.e. is
not used for commercial purposes.
• The appliance is installed in accordance with
all relevant regulations in force within your
new country of residence.
The provisions of this European Guarantee do
not affect any of the rights granted to you by
law.
www.zanussi.com
www.electrolux.com
Albania
+355 4 261 450
Rruga “Kavajës”, ish-parku autobuzëve, Tiranë
Belgique/België/Belgien
+32 2 7162444
Raketstraat 40, 1130 Brussel/Bruxelles
Česká Republika
+420 261 302 261
Budějovická 3, Praha 4, 140 21
Danmark
+45 70 11 74 00
Strevelinsvej 38-40, 7000 Fredericia
Deutschland
+49 180 32 26 622
Fürther Str. 246, 90429 Nürnberg
Eesti
+37 2 66 50 030
Pärnu mnt. 153, 11624 Tallinn
España
+34 902 11 63 88
Carretera M-300, Km. 29,900 Alcalá de Henares Madrid
France
08 92 68 24 33 (0.34€/
min)
www.electrolux.fr
Great Britain
+44 8445 616 616
Addington Way, Luton, Bedfordshire LU4
9QQ
Hellas
+30 23 10 56 19 70
4, Limnou Str., 54627 Thessaloniki
Hrvatska
+385 1 63 23 338
Slavonska avenija 3, 10000 Zagreb
Ireland
+353 1 40 90 753
Long Mile Road Dublin 12
Italia
+39 (0) 434 558500
Corso Lino Zanussi, 30 - 33080 Porcia (PN)
Latvija
+371 67313626
Kr. Barona iela 130/2, LV-1012, Riga
Lietuva
+370 5 278 06 03
Ozo 10a, LT-08200 Vilnius
Luxembourg
+352 42 431 301
Rue de Bitbourg, 7, L-1273 Hamm
Magyarország
(06-1)467-3205
+361 252 1773
H-1142 Budapest XIV, Erzsébet Királyné
útja 87
Nederland
+31 17 24 68 300
Vennootsweg 1, 2404 CG - Alphen aan den
Rijn
Norge
+47 81 5 30 222
Risløkkvn. 2 , 0508 Oslo
Österreich
0810 955030
Herziggasse 9, 1230 Wien
Polska
+48 22 43 47 300
ul. Kolejowa 5/7, 01–217 Warszawa
Portugal
+35 12 14 40 39 39
Quinta da Fonte - Edifício Gonçalves Zarco Q 35 -2774-518 Paço de Arcos
Romania
+40 21 451 20 30
Str. Garii Progresului 2, S4, 040671 RO
Schweiz - Suisse - Svizzera
0848 848 111
Industriestrasse 10, CH-5506 Mägenwil
Slovenija
+38 61 24 25 731
Gerbičeva ulica 110, 1000 Ljubljana
Slovensko
+421 2 32 14 13 34-5
Electrolux Slovakia s.r.o., Electrolux Domáce spotrebiče SK, Galvaniho 17/B, 821 04 Bratislava
Suomi
030 600 5200
Lankapuhelinverkosta 0,0828€/puhelu+0,032€/min Matkapuhelinverkosta 0,192€/min
Sverige
www.zanussi.com
+46 (0)771 76 76 76
Electrolux Service, S:t Göransgatan 143,
S-105 45 Stockholm
17
Türkiye
+90 21 22 93 10 25
Tarlabaşı caddesi no : 35 Taksim İstanbul
Россия
8-800-200-3589
129090 Москва, Олимпийский проспект,
16, БЦ "Олимпик"
Україна
+380 44 586 20 60
04074 Київ, вул.Автозаводська, 2а, БЦ
"Алкон"
18
www.zanussi.com
www.zanussi.com
19
892955934-A-472012
www.zanussi.com/shop
Download PDF

advertising