Electrolux | EHD8740FOK | User manual | Electrolux EHD8740FOK User Manual

EHD8740FOK
EN
Hob
User Manual
2
www.electrolux.com
CONTENTS
1. SAFETY INFORMATION....................................................................................2
2. SAFETY INSTRUCTIONS..................................................................................4
3. PRODUCT DESCRIPTION................................................................................ 6
4. DAILY USE......................................................................................................... 8
5. HINTS AND TIPS............................................................................................. 11
6. CARE AND CLEANING....................................................................................13
7. TROUBLESHOOTING......................................................................................13
8. INSTALLATION................................................................................................ 16
9. TECHNICAL INFORMATION........................................................................... 18
10. ENERGY EFFICIENCY.................................................................................. 19
11. SERVICE AND GUARANTEE IN TAIWAN.................................................... 19
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that
brings with it decades of professional experience and innovation. Ingenious and
stylish, it has been designed with you in mind. So whenever you use it, you can
be safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com/webselfservice
Register your product for better service:
www.registerelectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
1.
SAFETY INFORMATION
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
responsible if an incorrect installation and use causes
ENGLISH
3
injuries and damages. Always keep the instructions with
the appliance for future reference.
1.1 Children and vulnerable people safety
•
•
•
•
•
•
•
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved.
Do not let children play with the appliance.
Keep all packaging away from children.
Keep children and pets away from the appliance when
it operates or when it cools down. Accessible parts are
hot.
If the appliance has a child safety device, we
recommend you activate it.
Cleaning and user maintenance shall not be made by
children without supervision.
Children of less than 3 years should be kept away
unless continuously supervised.
1.2 General Safety
•
•
•
•
•
•
•
The appliance and its accessible parts become hot
during use. Do not touch the heating elements.
Do not operate the appliance by means of an external
timer or separate remote-control system.
Unattended cooking on a hob with fat or oil can be
dangerous and may result in fire.
Never try to extinguish a fire with water, but switch off
the appliance and then cover flame e.g. with a lid or a
fire blanket.
Do not store items on the cooking surfaces.
Metallic objects such as knives, forks, spoons and lids
should not be placed on the hob surface since they
can get hot.
Do not use a steam cleaner to clean the appliance.
4
www.electrolux.com
•
•
•
After use, switch off the hob element by its control and
do not rely on the pan detector.
If the glass ceramic surface / glass surface is cracked,
switch off the appliance to avoid the possibility of
electric shock.
If the supply cord is damaged, it must be replaced by
the manufacturer, an authorized Service or similarly
qualified persons in order to avoid a hazard.
2. SAFETY INSTRUCTIONS
2.1 Installation
2.2 Electrical Connection
WARNING!
Only a qualified person must
install this appliance.
•
•
•
•
•
•
•
•
•
•
•
Remove all the packaging.
Do not install or use a damaged
appliance.
Obey the installation instruction
supplied with the appliance.
Keep the minimum distance from the
other appliances and units.
Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
Seal the cut surfaces with a sealant to
prevent moisture to cause swelling.
Protect the bottom of the appliance
from steam and moisture.
Do not install the appliance adjacent
to a door or under a window. This
prevents hot cookware to fall from the
appliance when the door or the
window is opened.
If the appliance is installed above
drawers make sure that the space,
between the bottom of the appliance
and the upper drawer, is sufficient for
air circulation.
The bottom of the appliance can get
hot. Make sure to install a noncombustile separation panel under the
appliance to prevent access to the
bottom.
Make sure that the ventilation space
of 2 mm, between the worktop and
the front of the below unit, is free. The
warranty does not cover damages
caused by the lack of an adequate
ventilation space.
WARNING!
Risk of fire and electrical
shock.
•
•
•
•
•
•
•
•
•
•
•
•
All electrical connections should be
made by a qualified electrician.
The appliance must be earthed.
Before carrying out any operation
make sure that the appliance is
disconnected from the power supply.
Make sure that the electrical
information on the rating plate agrees
with the power supply. If not, contact
an electrician.
Make sure the appliance is installed
correctly. Loose and incorrect
electricity mains cable or plug (if
applicable) can make the terminal
become too hot.
Use the correct electricity mains
cable.
Do not let the electricity mains cable
tangle.
Make sure that a shock protection is
installed.
Use the strain relief clamp on the
cable.
Make sure the mains cable or plug (if
applicable) does not touch the hot
appliance or hot cookware, when you
connect the appliance to the near
sockets
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to
the mains plug (if applicable) or to the
mains cable. Contact our Authorised
ENGLISH
•
•
•
•
•
•
Service Centre or an electrician to
change a damaged mains cable.
The shock protection of live and
insulated parts must be fastened in
such a way that it cannot be removed
without tools.
Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
If the mains socket is loose, do not
connect the mains plug.
Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
The electrical installation must have
an isolation device which lets you
disconnect the appliance from the
mains at all poles. The isolation
device must have a contact opening
width of minimum 3 mm.
•
•
•
WARNING!
Risk of fire and explosion
•
•
•
•
2.3 Use
WARNING!
Risk of injury, burns and
electrical shock.
•
•
•
•
•
•
•
•
•
•
Remove all the packaging, labelling
and protective film (if applicable)
before first use.
Use this appliance in a household
environment.
Do not change the specification of this
appliance.
Make sure that the ventilation
openings are not blocked.
Do not let the appliance stay
unattended during operation.
Set the cooking zone to “off” after
each use.
Do not rely on the pan detector.
Do not put cutlery or saucepan lids on
the cooking zones. They can become
hot.
Do not operate the appliance with wet
hands or when it has contact with
water.
Do not use the appliance as a work
surface or as a storage surface.
5
If the surface of the appliance is
cracked, disconnect immediately the
appliance from the power supply. This
to prevent an electrical shock.
Users with a pacemaker must keep a
distance of minimum 30 cm from the
induction cooking zones when the
appliance is in operation.
When you place food into hot oil, it
may splash.
Fats and oil when heated can release
flammable vapours. Keep flames or
heated objects away from fats and
oils when you cook with them.
The vapours that very hot oil releases
can cause spontaneous combustion.
Used oil, that can contain food
remnants, can cause fire at a lower
temperature than oil used for the first
time.
Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
WARNING!
Risk of damage to the
appliance.
•
•
•
•
•
•
•
Do not keep hot cookware on the
control panel.
Do not let cookware to boil dry.
Be careful not to let objects or
cookware fall on the appliance. The
surface can be damaged.
Do not activate the cooking zones
with empty cookware or without
cookware.
Do not put aluminium foil on the
appliance.
Cookware made of cast iron,
aluminium or with a damaged bottom
can cause scratches on the glass /
glass ceramic. Always lift these
objects up when you have to move
them on the cooking surface.
This appliance is for cooking
purposes only. It must not be used for
other purposes, for example room
heating.
6
www.electrolux.com
2.4 Care and cleaning
•
•
•
•
•
•
Clean regularly the appliance to
prevent the deterioration of the
surface material.
Deactivate the appliance and let it
cool down before you clean it.
Disconnect the appliance from the
electrical supply before maintenance.
Do not use water spray and steam to
clean the appliance.
Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal
objects.
•
•
Contact your municipal authority for
information on how to discard the
appliance correctly.
Disconnect the appliance from the
mains supply.
Cut off the mains cable and discard it.
2.6 Service
•
•
To repair the appliance contact an
Authorised Service Centre.
Use original spare parts only.
2.5 Disposal
WARNING!
Risk of injury or suffocation.
3. PRODUCT DESCRIPTION
3.1 Cooking surface layout
1
1
1 Induction cooking zone
2 Control panel
1
2
1
3.2 Control panel layout
1
2
11
3
10
5
4
9 8 7
To see the control panel activate the appliance with
.
6
ENGLISH
Use the sensor fields to operate the appliance. The displays, indicators and sounds
tell which functions operate.
Sen‐
sor
field
Function
Comment
STOP+GO
To activate and deactivate the function.
-
Heat setting display
To show the heat setting.
-
Timer indicators of cook‐
ing zones
To show for which zone you set the time.
-
Timer display
To show the time in minutes.
5
Connect Function
To activate and deactivate the function.
6
Lock / The Child Safety
Device
To lock / unlock the control panel.
7
-
To select the cooking zone.
-
To increase or decrease the time.
ON / OFF
To activate and deactivate the hob.
Control bar
To set a heat setting.
Power function
To activate and deactivate the function.
1
2
3
4
/
8
9
10
-
11
3.3 Heat setting displays
Display
Description
The cooking zone is deactivated.
The cooking zone operates.
-
STOP+GO function operates.
Automatic Heat Up function operates.
Power function operates.
+ digit
There is a malfunction.
/
OptiHeat Control (3 step Residual heat indicator): continue cook‐
ing / keep warm / residual heat.
/
Lock / The Child Safety Device function operates.
Incorrect or too small cookware or no cookware on the cooking
zone.
7
8
www.electrolux.com
Display
Description
Automatic Switch Off function operates.
3.4 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/
/
There is a risk of
burns from residual heat.
The indicator shows the
level of the residual heat.
The induction cooking zones make the
heat necessary for cooking process
directly in the bottom of the cookware.
The glass ceramic is heated by the heat
of the cookware.
4. DAILY USE
WARNING!
Refer to Safety chapters.
4.1 Activating and deactivating
Touch
for 1 second to activate or
deactivate the hob.
The control panel comes on after you
activate the hob and goes off after you
deactivate the hob. When the hob is
deactivated you can see only
field.
sensor
4.2 Automatic Switch Off
The function deactivates the hob
automatically if:
•
•
•
•
•
all cooking zones are deactivated,
you do not set the heat setting after
you activate the hob,
you spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or
clean the control panel.
the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
you use incorrect cookware. The
symbol
comes on and the cooking
zone deactivates automatically after 2
minutes.
•
you do not deactivate a cooking zone
or change the heat setting. After some
time
comes on and the hob
deactivates.
The relation between the heat setting
and the time after which the hob
deactivates:
Heat setting
,1-3
The hob deacti‐
vates after
6 hours
4-7
5 hours
8-9
4 hours
10 - 14
1.5 hour
4.3 The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat
setting or move your finger along the
control bar until you reach the correct
heat setting.
ENGLISH
9
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch
( comes on).
Immediately touch the correct heat
setting. After 5 seconds
comes on.
To deactivate the function: change the
heat setting.
4.7 Power function
4.4 Using the cooking zones
Put the cookware on the cross / square
which is on the surface that you cook.
Cover the cross / square fully. Induction
cooking zones adapt to the dimension of
the bottom of the cookware
automatically. You can cook with the
large cookware on two cooking zones at
the same time.
This function makes more power
available to the induction cooking zones.
The function can be activated for the
induction cooking zone only for a limited
period of time. After this time the
induction cooking zone automatically
sets back to the highest heat setting.
Refer to “Technical
information” chapter.
To activate the function for a cooking
4.5 Connect Function
zone: touch
Use this function with the
Infinite Plancha1) accessory.
.
comes on.
To deactivate the function: change the
heat setting.
This function connects two right side
cooking zones under the accessory and
they operate as one.
4.8 Timer
First set the heat setting for one of the
right side cooking zones.
Count Down Timer
You can use this function to set how long
the cooking zone should operate for a
single cooking session.
To activate the function: touch . To
set or change the heat setting touch one
of the right control sensors.
First set the heat setting for the cooking
zone then set the function.
To deactivate the function: touch
The cooking zones operate
independently.
.
4.6 Automatic Heat Up
If you activate this function you can get a
necessary heat setting in a shorter time.
The function sets the highest heat setting
for some time and then decreases to the
correct heat setting.
To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
To activate the function: touch
of
the timer to set the time (00 - 99
minutes). When the indicator of the
cooking zone starts to flash slowly the
time counts down.
To see the remaining time: set the
cooking zone with
. The indicator of
1) The accessory is not supplied with the appliance. For more information, please
contact your local supplier.
10
www.electrolux.com
the cooking zone starts to flash quickly.
The display shows the remaining time.
The function has no effect
on the operation of the
cooking zones.
To change the time: set the cooking
zone with
. Touch
or
.
4.9 STOP+GO
To deactivate the function: set the
and touch . The
cooking zone with
remaining time counts back to 00. The
indicator of the cooking zone goes out.
When the time comes to an
end, the sound operates and
00 flashes. The cooking
zone deactivates.
To stop the sound: touch
.
CountUp Timer (The count up timer)
You can use this function to monitor how
long the cooking zone operates.
To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
To activate the function: touch
of
the timer.
comes on. When the
indicator of the cooking zone starts to
flash slowly the time counts up. The
display switches between
counted time (minutes).
and
To see how long the cooking zone
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, you cannot
change the heat setting.
The function does not stop the timer
functions.
To activate the function: touch
comes on.
.
To deactivate the function: touch .
The previous heat setting comes on.
4.10 Lock
You can lock the control panel while
cooking zones operate. It prevents an
accidental change of the heat setting.
Set the heat setting first.
To activate the function: touch .
comes on for 4 seconds. The Timer stays
on.
To deactivate the function: touch .
The previous heat setting comes on.
operates: set the cooking zone with .
The indicator of the cooking zone starts
to flash quickly. The display shows how
long the zone operates.
When you deactivate the
hob, you also deactivate this
function.
To deactivate the function: set the
4.11 The Child Safety Device
cooking zone with
This function prevents an accidental
operation of the hob.
and touch
or
. The indicator of the cooking zone
goes out.
Minute Minder
You can use this function as a Minute
Minder when the hob is activated and
the cooking zones do not operate. The
heat setting display shows
.
To activate the function: touch
.
hob with
Touch
. Do not set the heat setting.
for 4 seconds.
Deactivate the hob with
comes on.
.
To deactivate the function: activate the
.
Touch
or
of the timer to set the
time. When the time comes to an end,
the sound operates and 00 flashes.
To stop the sound: touch
To activate the function: activate the
hob with
Touch
. Do not set the heat setting.
for 4 seconds.
Deactivate the hob with
comes on.
.
To override the function for only one
cooking time: activate the hob with
.
ENGLISH
comes on. Touch
for 4 seconds.
Set the heat setting in 10 seconds.
You can operate the hob. When you
deactivate the hob with
operates again.
•
•
the function
•
4.12 OffSound Control
(Deactivating and activating the
sounds)
•
Deactivate the hob. Touch
for 3
seconds. The display comes on and
•
goes out. Touch
for 3 seconds.
or
comes on. Touch
of the timer to
choose one of the following:
•
- the sounds are off
•
- the sounds are on
11
Each phase has a maximum
electricity loading of 3700 W.
The function divides the power
between cooking zones connected to
the same phase.
The function activates when the total
electricity loading of the cooking
zones connected to a single phase
exceeds 3700 W.
The function decreases the power to
the other cooking zones connected to
the same phase.
The heat setting display of the
reduced zones changes between two
levels.
To confirm your selection wait until the
hob deactivates automatically.
When the function is set to
hear the sounds only when:
•
•
•
•
you can
you touch
Minute Minder comes down
Count Down Timer comes down
you put something on the control
panel.
4.13 Power management
function
•
Cooking zones are grouped according
to the location and number of the
phases in the hob. See the illustration.
5. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
Cookware material
•
5.1 Cookware
For induction cooking zones
a strong electro-magnetic
field creates the heat in the
cookware very quickly.
•
Use the induction cooking
zones with correct
cookware.
•
correct: cast iron, steel, enamelled
steel, stainless steel, the bottom
made of multi-layer (with correct mark
from a manufacturer).
not correct: aluminium, copper,
brass, glass, ceramic, porcelain.
Cookware is correct for an induction
hob if:
•
some water boils very quickly on a
zone set to the highest heat setting.
a magnet pulls on to the bottom of the
cookware.
12
www.electrolux.com
The bottom of the cookware
must be as thick and flat as
possible.
Cookware dimensions
Induction cooking zones adapt to the
dimension of the bottom of the cookware
automatically to some limit.
The cooking zone efficiency is related to
the diameter of the cookware. The
cookware with a smaller diameter than
the minimum receives only a part of the
power generated by the cooking zone.
Refer to “Technical
information” chapter.
5.2 The noises during operation
If you can hear:
•
•
•
crack noise: cookware is made of
different materials (sandwich
construction).
whistle sound: you use the cooking
zone with high power level and the
cookware is made of different
materials (sandwich construction).
humming: you use high power level.
Heat setting
-1
•
•
clicking: electric switching occurs.
hissing, buzzing: the fan operates.
The noises are normal and do not
refer to hob malfunction.
5.3 Öko Timer (Eco Timer)
To save energy, the heater of the
cooking zone deactivates before the
count down timer sounds. The difference
in the operation time depends on the
heat setting level and the length of the
cooking operation.
5.4 Examples of cooking
applications
The relation between the heat setting
and the cooking zone consumption of
power is not linear. When you increase
the heat setting, it is not proportional to
the increase of the cooking zone
consumption of power. It means that the
cooking zone with the medium heat
setting uses less than a half of its power.
The data in the table is for
guidance only.
Use to:
Time
(min)
Hints
Keep cooked food warm.
as nec‐ Put a lid on the cookware.
essary
1-3
Hollandaise sauce, melt: but‐ 5 - 25
ter, chocolate, gelatine.
Mix from time to time.
1-3
Solidify: fluffy omelettes,
baked eggs.
10 - 40
Cook with a lid on.
3-5
Simmer rice and milkbased
dishes, heating up readycooked meals.
25 - 50
Add the minimum twice as
much liquid as rice, mix milk
dishes part procedure
through.
5-7
Steam vegetables, fish,
meat.
20 - 45
Add some tablespoons of
liquid.
7-9
Steam potatoes.
20 - 60
Use max. ¼ l water for 750 g
of potatoes.
7-9
Cook larger quantities of
food, stews and soups.
60 150
Up to 3 l liquid plus ingredi‐
ents.
ENGLISH
Time
(min)
13
Heat setting
Use to:
9 - 12
Gentle fry: escalope, veal
as nec‐ Turn halfway through.
cordon bleu, cutlets, rissoles, essary
sausages, liver, roux, eggs,
pancakes, doughnuts.
12 - 13
Heavy fry, hash browns, loin
steaks, steaks.
14
Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.
5 - 15
Hints
Turn halfway through.
Boil large quantities of water. Power function is activated.
6. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
6.1 General information
•
•
•
•
•
•
Clean the hob after each use.
Always use cookware with clean
bottom.
Scratches or dark stains on the
surface have no effect on how the hob
operates.
Use a special cleaner applicable for
the surface of the hob.
Use a special scraper for the glass.
the dirt can cause damage to the hob.
Put the special scraper on the glass
surface at an acute angle and move
the blade on the surface.
Remove when the hob is
sufficiently cool: limescale rings,
water rings, fat stains, shiny metallic
discoloration. Clean the hob with a
moist cloth and non-abrasive
detergent. After cleaning, wipe the
hob dry with a soft cloth.
6.2 Cleaning the hob
•
Remove immediately: melted plastic,
plastic foil, and food with sugar. If not,
7. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
7.1 What to do if...
Problem
Possible cause
Remedy
You cannot activate or op‐
erate the hob.
The hob is not connected
to an electrical supply or it
is connected incorrectly.
Check if the hob is correct‐
ly connected to the electri‐
cal supply. Refer to the
connection diagram.
14
www.electrolux.com
Problem
Possible cause
Remedy
The fuse is blown.
Make sure that the fuse is
the cause of the malfunc‐
tion. If the fuse is blown
again and again, contact a
qualified electrician.
Activate the hob again and
set the heat setting in less
than 10 seconds.
You touched 2 or more
sensor fields at the same
time.
Touch only one sensor
field.
STOP+GO function oper‐
ates.
Refer to "Daily use" chap‐
ter.
There is water or fat stains
on the control panel.
Clean the control panel.
An acoustic signal sounds
and the hob deactivates.
An acoustic signal sounds
when the hob is deactiva‐
ted.
You put something on one
or more sensor fields.
Remove the object from
the sensor fields.
The hob deactivates.
You put something on the
Remove the object from
the sensor field.
sensor field
.
Residual heat indicator
does not come on.
The zone is not hot be‐
If the zone operated suffi‐
cause it operated only for a ciently long to be hot,
short time.
speak to an Authorised
Service Centre.
Automatic Heat Up func‐
tion does not operate.
The zone is hot.
Let the zone become suffi‐
ciently cool.
The highest heat setting is
set.
The highest heat setting
has the same power as the
function.
The heat setting changes
between two levels.
Power management func‐
tion operates.
Refer to "Daily use" chap‐
ter.
The sensor fields become
hot.
The cookware is too large Put large cookware on the
or you put it too near to the rear zones if possible.
controls.
There is no signal when
The signals are deactiva‐
you touch the panel sensor ted.
fields.
comes on.
Activate the signals.
Refer to "Daily use" chap‐
ter.
Automatic Switch Off oper‐ Deactivate the hob and ac‐
ates.
tivate it again.
ENGLISH
Problem
Possible cause
15
Remedy
comes on.
The Child Safety Device or Refer to "Daily use" chap‐
the Lock function operates. ter.
comes on.
There is no cookware on
the zone.
Put cookware on the zone.
The cookware is incorrect.
Use the correct cookware.
Refer to “Hints and tips”
chapter.
The diameter of the bottom Use cookware with correct
of the cookware is too
dimensions.
small for the zone.
Refer to “Technical infor‐
mation” chapter.
The cookware does not
cover the cross / square.
and a number come on. There is an error in the
hob.
Cover the cross / square
fully.
Disconnect the hob from
the electrical supply for
some time. Disconnect the
fuse from the electrical
system of the house. Con‐
nect it again. If
comes
on again, speak to an Au‐
thorised Service Centre.
comes on.
The electrical connection is Speak to a qualified electri‐
incorrect. The supply volt‐ cian to check the installa‐
age is out of range.
tion.
comes on.
There is an error in the hob
because a cookware boils
dry. Automatic Switch Off
and the overheating pro‐
tection for the zones oper‐
ate.
comes on.
The cooling fan is blocked. Check if objects block the
Deactivate the hob. Re‐
move the hot cookware.
After approximately 30
seconds, activate the zone
again. If the cookware was
the problem, the error mes‐
sage goes out. Residual
heat indicator can stay on.
Let the cookware become
sufficiently cool. Check if
your cookware is compati‐
ble with the hob.
Refer to “Hints and tips”
chapter.
cooling fan. If
comes
on again, speak to an Au‐
thorised Service Centre.
16
www.electrolux.com
Problem
Possible cause
Remedy
The electrical connection is Speak to a qualified electri‐
incorrect. The hob is con‐
cian to check the installa‐
nected only to one phase. tion. Refer to the connec‐
tion diagram.
comes on.
7.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Give also
three digit letter code for the glass
ceramic (it is in the corner of the glass
surface) and an error message that
comes on. Make sure, you operated the
hob correctly. If not the servicing by a
service technician or dealer will not be
free of charge, also during the warranty
period. The instructions about the
Service Centre and conditions of
guarantee are in the guarantee booklet.
8. INSTALLATION
units and work surfaces that align to the
standards.
WARNING!
Refer to Safety chapters.
8.3 Connection cable
8.1 Before the installation
Before you install the hob, write down the
information bellow from the rating plate.
The rating plate is on the bottom of the
hob.
Serial number ...........................
8.2 Built-in hobs
Only use the built-in hobs after you
assemble the hob into correct built-in
8.4 Assembly
min.
500mm
min.
50mm
min.
2mm
•
•
For a single phase or two phase
connection use the following (or
higher) mains cable type: H05BB-F T
min 90°C.
To replace the damaged mains cable
use the following (or higher) mains
cable type: H05BB-F T min 90°C.
Speak to your local Service Centre.
ENGLISH
min. 2 mm
A
min. 2 mm
B
< 20 mm
B
> 20 mm
min. 500 mm
min
30 mm
B
57 mm
41 mm
31 mm
A
12 mm
28 mm
38 mm
A
min. 500 mm
A
12 mm
28 mm
38 mm
B
57 mm
41 mm
31 mm
min.
38 mm
min.
2 mm
R 5mm
min.
55mm
+1
490+1mm 750 mm
min.
12 mm
min.
2 mm
17
18
www.electrolux.com
8.5 Protection box
If you use a protection box (an additional
accessory), the front airflow space of 2
mm and the protective floor directly
below the hob are not necessary. The
protection box accessory may not be
available in some countries. Please
contact your local supplier.
You can not use the
protection box if you install
the hob above an oven.
9. TECHNICAL INFORMATION
9.1 Rating plate
Modell EHD8740FOK
Typ 58 GBD CC AU
Induction 7.4 kW
Ser.Nr. .................
ELECTROLUX
PNC 949 596 515 00
220 - 240 V 50 - 60 Hz
Made in Germany
7.4 kW
9.2 Cooking zones specification
Cooking zone Nominal pow‐
er (maximum
heat setting)
[W]
Power func‐
tion [W]
Power func‐
Cookware di‐
tion maximum ameter [mm]
duration [min]
Left front
2300
3200
10
125 - 210
Left rear
2300
3200
10
125 - 210
Right front
2300
3200
10
125 - 210
Right rear
2300
3200
10
125 - 210
The power of the cooking zones can be
different in some small range from the
data in the table. It changes with the
material and dimensions of the
cookware.
For optimal cooking results use
cookware not larger than the diameter in
the table.
ENGLISH
19
10. ENERGY EFFICIENCY
10.1 Product information according to EU 66/2014
Model identification
EHD8740FOK
Type of hob
Built-In Hob
Number of cooking zones
4
Heating technology
Induction
Diameter of circular cook‐ Left front
ing zones (Ø)
Left rear
Right front
Right rear
21.0 cm
21.0 cm
21.0 cm
21.0 cm
Energy consumption per Left front
cooking zone (EC electric Left rear
cooking)
Right front
Right rear
172.6 Wh / kg
174.9 Wh / kg
178.3 Wh / kg
174.9 Wh / kg
Energy consumption of
the hob (EC electric hob)
175.2 Wh / kg
EN 60350-2 - Household electric cooking
appliances - Part 2: Hobs - Methods for
measuring performance
The energy measurements referring to
the cooking area are identified by the
crosses of the respective cooking zones.
10.2 Energy saving
You can save energy during everyday
cooking if you follow below hints.
•
•
If it is possible, always put the lids on
the cookware.
•
Before you activate the cooking zone
put the cookware on it.
Put the smaller cookware on the
smaller cooking zones.
Put the cookware directly in the centre
of the cooking zone.
Use the residual heat to keep the food
warm or to melt it.
•
•
•
When you heat up water, use only the
amount you need.
11. SERVICE AND GUARANTEE IN TAIWAN
The appliance is guaranteed by Taiwan
Sakura, the authorized agent of
Electrolux major kitchen appliance in
Taiwan. Sakura guarantees to the end
user 2 year free warranty services and
an extendable free warranty plan for 1
year, subject to the terms and conditions
listed below:
1. Service and warranty are only
applied to Electrolux Inspiration
major kitchen appliances sold by
Taiwan Sakura in Taiwan.
2. Taiwan Sakura provides free
maintenance service for 2 year
commencing from the date of
appliance production. End users that
register their products online or
through mailing back the warranty
cards within 30days after purchasing
can extend the free warranty for 1
year commencing from the date of
registration.
3. Free maintenance service is valid for
the functional components, including
PCBs, pumps, motors, heating
system…etc.
4. One year free maintenance service is
provided for non-functional
20
www.electrolux.com
components, accessories, demo
products, and consumptive materials.
5. Within the period of warranty, Taiwan
Sakura shall provide free
maintenance service to end users.
After the expiration date of warranty,
end users will have to afford the fee
of repairing and parts. If services
occur, the replaced parts belong to
Taiwan Sakura.
6. Warranty is invalid in the below
cases:
• The warranty has expired.
• Damages or malfunctions caused
by force majeure, including
natural calamities, thunder,
accidents…etc.
• Damages or malfunctions caused
by misusing, negligence, improper
installation, modification and
disassembly, and transportation.
• Using unauthorized parts.
• Repaired by other parties.
• Products used under commercial
circumstances, including
restaurants, cooking classrooms,
baking shops…etc.
• Not the products imported by
Taiwan Sakura.
The execution shall obey the
latest announced clauses.
7. To ensure your right of warranty,
please register the products while
purchasing. Ask the retailer to fill up
related info for you on the warranty
cards and mail them back to Taiwan
Sakura or simply register online.
Please keep your invoices for data
checking.
Service Info
1. Telephone: 0800-021818
2. E-mail: service@sakura.com.tw
3. Service personnel of Taiwan Sakura
will be wearing uniform and service
ID card for distinguishing.
4. Within the period of warranty,
services are free of charge.
5. When the warranty expired and end
users choose not to repair the
appliance after inspection, Taiwan
Sakura will have to charge NT300 as
inspection fee each time.
6. When the warranty expired and end
users choose to repair the appliance
after inspection, Taiwan Sakura will
have to charge the fee of the parts
required. Inspection fee will be free of
charge.
7. Prices of parts differ from component
to component; Taiwan Sakura will
have to confirm it after inspection
according to the latest quotation.
12. ENVIRONMENT CONCERNS
Recycle the materials with the symbol
. Put the packaging in applicable
containers to recycle it. Help protect the
environment and human health and to
recycle waste of electrical and electronic
appliances. Do not dispose appliances
*
marked with the symbol with the
household waste. Return the product to
your local recycling facility or contact
your municipal office.
ENGLISH
21
22
www.electrolux.com
ENGLISH
23
867327171-A-382015
www.electrolux.com/shop
Download PDF

advertising