Bosch | WAK20060IN | Operat/Install/Short Instruct/Progr.-tab | Bosch WAK20060IN Washing machine Operat/Install/Short Instruct/Progr.-tab

Bosch WAK20060IN Washing machine Operat/Install/Short Instruct/Progr.-tab
Washing machine
WAK..
en Instruction Manual and Installation Instructions
Your new washing machine
Display rules
You have chosen a Bosch washing
machine.
: Warning!
Please take a few minutes to read and
become familiar with the advantages of
your washing machine.
This combination of symbol and signal
word indicates a possibly dangerous
situation. Not heeding the warning can
cause death or injuries.
To meet the high quality demands
required by Bosch, every washing
machine that leaves our factory is
carefully checked to ensure that it
functions correctly and is in perfect
condition.
Caution!
For more information on our products,
accessories, replacement parts and
services, see our website www.boschhome.com or contact our after-sales
service centres.
Note/tip
If the operating and installation
instructions describe different models,
any differences will be pointed out at the
relevant points in the text.
This signal word indicates a possibly
dangerous situation. Not heeding the
caution can cause property and/or
environmental damage.
Information about the optimum use of
the appliance/any other useful
information.
1. 2. 3. / a) b) c)
The steps are represented by numbers
or letters.
■
Read these operating and installation
instructions before switching on the
washing machine.
2
/-
Lists are represented by a small box or
a dash.
en
Contents
enI structionManual ndInstal tionI structions
8 Intended use. . . . . . . . . . . . . . . . .4
( Safety instructions . . . . . . . . . . .5
Detergent . . . . . . . . . . . . . . . . . . 19
Correct selection of detergent . . . . . .19
Saving energy and detergent . . . . . .20
C
Electrical safety. . . . . . . . . . . . . . . . . . 5
Risk of injury . . . . . . . . . . . . . . . . . . . . 5
Safety for children. . . . . . . . . . . . . . . . 5
\ Additional programme
7 Environmental protection . . . . . .7
settings. . . . . . . . . . . . . . . . . . . . 20
Prewash T . . . . . . . . . . . . . . . . . . . .20
Quick e . . . . . . . . . . . . . . . . . . . . . .20
Packaging/used appliance . . . . . . . . . 7
Tips on economical use . . . . . . . . . . . 7
1 Operating the appliance . . . . . . 21
5 Positioning and connecting . . . .8
Included with the appliance . . . .
Safety instructions. . . . . . . . . . . .
Installation surface . . . . . . . . . . .
Installation on a base
or a wooden joist floor . . . . . . . .
Installing the appliance
in a kitchenette . . . . . . . . . . . . . .
Removing the transport locks . . .
Hose and cable lengths . . . . . . .
Water inlet. . . . . . . . . . . . . . . . . .
Water outlet . . . . . . . . . . . . . . . .
Levelling . . . . . . . . . . . . . . . . . . .
Electrical connection. . . . . . . . . .
Before washing for the first time .
Transportation. . . . . . . . . . . . . . .
....8
....9
....9
....9
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
..9
. 10
. 10
. 11
. 12
. 13
. 13
. 14
. 15
* Getting to know
the appliance . . . . . . . . . . . . . . .16
Washing machine . . . . . . . . . . . . . . . 16
Control panel . . . . . . . . . . . . . . . . . . 17
Z Laundry. . . . . . . . . . . . . . . . . . . .18
Prepare the laundry
Sorting laundry . . . .
Starching . . . . . . . .
Dyeing/bleaching . .
Soaking . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 18
. 18
. 18
. 19
. 19
Preparing the washing machine
Select programme/switch
on the appliance . . . . . . . . . . . .
Select additional programme
settings . . . . . . . . . . . . . . . . . . .
Placing laundry into the drum . .
Measure and add detergent
and care products . . . . . . . . . . .
Starting the programme . . . . . .
Changing the programme . . . . .
Cancel the programme . . . . . . .
Programme end . . . . . . . . . . . .
Removing laundry/switching
off the appliance . . . . . . . . . . . .
. . . .21
. . . .21
. . . .21
. . . .21
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.22
.23
.23
.23
.23
. . . .23
H
Sensors . . . . . . . . . . . . . . . . . . . 24
Automatic load sensing . . . . . . . . . . .24
Unbalanced load detection
system. . . . . . . . . . . . . . . . . . . . . . . .24
2 Cleaning and maintenance. . . . 24
Machine housing/control panel . . .
Drum . . . . . . . . . . . . . . . . . . . . . . .
Descaling . . . . . . . . . . . . . . . . . . .
Detergent drawer and housing . . .
Detergent solution pump blocked .
The drain hose at the
siphon is blocked . . . . . . . . . . . . .
Filter in the water
supply is blocked . . . . . . . . . . . . .
.
.
.
.
.
.24
.24
.24
.25
.25
. .26
. .26
3
en
Intended use
3 Faults and what to
do about them . . . . . . . . . . . . . 27
Emergency release . . . . . . . . . . . . . 27
Information on the display panel . . . 28
Faults and what to do about them . . 28
8 Intended use
■
esudntI
■
4 After-sales service . . . . . . . . . . 30
J Technical data . . . . . . . . . . . . . . 30
■
■
■
This appliance is intended for private
domestic use only.
Do not install or operate this
appliance anywhere that is liable to
experience frost and/or outdoor
conditions. There is a risk that the
appliance will be damaged if
residual water in it freezes. If hoses
freeze up, they may crack/burst.
This appliance must only be used for
washing domestic laundry,
consisting of machine-washable
items and hand-washable woollens
(see label on item). Using the
appliance for any other purpose is
outside of the scope of its intended
application and is forbidden.
This appliance is suitable for
operation with cold mains water and
commercially available detergents
and care products (must be suitable
for use in washing machines).
This appliance is intended for use up
to a maximum height of
4000 metres above sea level.
Before you switch on the appliance:
Check that there is no visible damage to
the appliance. Do not operate the
appliance if it is damaged. Should you
have any problems, please contact your
specialist dealer or our customer
service.
Read and follow the operating and
installation instructions and all other
information provided with this appliance.
Retain the documents for subsequent
use or for subsequent owners.
4
Safety instructions
( Safety instructions
■
Electrical safety
snoitcursniyteSfa
: Warning
Risk of death!
There is a risk of electric shock
if you touch live components.
■
Never touch or hold the
mains plug with wet hands.
■
Only pull out the mains cable
by the plug and never by the
cable, as this could damage
it.
■
The appliance must be
grounded.
Electrical connection
~ Page 13
Risk of injury
: Warning
Risk of injury!
When the washing machine
is lifted by its protruding
parts (e.g. the washing
machine door), the
components may break off
and cause injuries.
Do not lift the washing
machine by protruding parts.
■
If you climb on the washing
machine, the worktop may
break and cause injuries.
Do not climb onto the
washing machine.
■
■
en
If you lean on the washing
machine door when it is
open, the washing machine
may tip over and cause
injuries.
Do not lean on the washing
machine door when it is
open.
Reaching into the drum
when it is turning can cause
injuries to hands.
Do not reach into the drum
when it is turning.
Wait until the drum has
stopped turning.
: Warning
Risk of scalding!
When you are washing at high
temperatures, there is a risk of
scalding if you come into
contact with hot water e.g. if hot
water is being drained into a
wash basin.
Do not reach into the hot
detergent solution.
Safety for children
: Warning
Danger of death!
If children play with the washing
machine, they may get into lifethreatening situations or injure
themselves.
■
Do not leave children
unattended near the washing
machine.
■
Do not let children play with
the washing machine.
5
en
Safety instructions
: Warning
Danger of death!
Children may lock themselves
in appliances, putting their lives
at risk.
For appliances that have
reached the end of their service
life:
■
Disconnect the mains plug.
■
Cut through the mains cable
and remove it, along with
plug.
■
Destroy the lock on the
washing machine door.
: Warning
Risk of suffocation!
Children may become wrapped
in packaging/film or packing
parts if allowed to play with
them, or they may pull them
over their heads and suffocate.
Keep packaging, film and
packaging parts out of the
reach of children.
6
: Warning
Risk of poisoning!
Detergents and care products
may be poisonous if
consumed.
Keep detergents and care
products out of the reach of
children.
: Warning
Eye/skin irritation!
Detergents and care products
may cause irritation if they
come into contact with the eyes
or skin.
Keep detergents and care
products out of the reach of
children.
: Warning
Risk of injury!
When you wash at high
temperatures, the glass in the
washing machine door gets
hot.
Do not let children touch the
hot washing machine door.
Environmental protection
7 Environmental
protection
Packaging/used appliance
noitceorplamnoteriEv
)
Dispose of packaging in an
environmentally-responsible
manner.
This appliance is certified in
accordance with the guidelines
on E-waste (Management )
Rules 2016 which govern
waste electrical and electronic
equipment. The guidelines
provide a framework for the
return and recycling of used
appliances.
Note: This product doesn't
contain any of hazardous
substances as specified in the
E-waste (Management) Rules
2016.
Do’s
■
Hand over the old/discarded
electronic equipment only to
authorized collection centers for
disposal
www.bosch-home.com/in/aboutbosch/responsibility.html
See also:
Contact No: 180042535287 (toll-free)
E-mail:
recycle@ewasteindia.com
Online
www.ewasteindia.com
website:
■
Consult the authorized service
center as to whether the Electronic
Equipment can be repaired or not,
before discarding
■
Consult the retailer about appliance
take back schemes
en
Don’ts
■
Don’t dump the discarded Electronic
Equipment in the open or in any land
fill site, as this will result in
contamination of the soil and the
ground water
■
Don’t dispose of the discarded
Electronic Equipment in household
bins or Municipal bins
■
The product is not meant for re-sale
to any unauthorized agencies/scrap
dealers
■
Don't keep any replaced spare
part(s) from the product in an
exposed area
Tips on economical use
■
■
■
■
■
Always utilise the maximum amount
of washing for the particular
programme.
Overview of programmes ~
Supplementary sheet for the
operating and installation
instructions.
Wash normally soiled laundry
without a prewash.
Save energy and detergent when
washing lightly and normally soiled
laundry.
~ "Detergent" on page 19
Energy-saving mode: The display
panel lighting goes out after a few
minutes and Start/Pause A flashes.
To activate the lighting, press any
button.
Energy-saving mode is not activated
if a programme is running.
If the laundry is subsequently dried
in a tumble dryer, select the spin
speed according to the tumble dryer
manufacturer's instructions.
7
en
Positioning and connecting
5 Positioning and
connecting
Included with the appliance
gnitceodnagiotPso
Note: Check the machine for transport
damage. Never use a damaged
machine. If you have a complaint,
please contact the retailer from whom
you purchased the appliance, or our
after-sales service.
In addition, a hose clamp (24 - 40 mm
diameter, available from specialist
dealers) is required to connect the
water drain hose to a siphon.
Useful tools
■
Spirit level for levelling
■
Wrench with:
– WAF 13 for loosening the
transport locks, and
– WAF 17 for aligning the
appliance feet
#
+
8
( Mains cable
0 Bag:
■
Installation and operating
instructions
■
After-sales service location
directory*
■
Warranty*
■
Cover caps for openings left
after removing the transport
locks
■
Wrench*
8 Water drain hose
@ Elbow for securing the water drain
hose*
H Water supply hose on standard/
Aqua-Secure models
P Water filter*
*depending on the model
3
Positioning and connecting
en
Safety instructions
Installation surface
: Warning
Note: The washing machine must be
aligned in a stable manner so that it
does not move around.
■
The installation surface must be firm
and level.
■
Soft floors/floor coverings are not
suitable.
Risk of injury!
■
The washing machine is very heavy.
Be careful when lifting/transporting
the washing machine.
■
When the washing machine is lifted
by its protruding parts (e.g. the
washing machine door), the
components may break off and
cause injuries.
Do not lift the washing machine by
protruding parts.
■
If the hose and mains cables are not
routed properly, there is a risk of
tripping and injury.
Lay hoses and cables in such a way
that there is no risk of tripping.
Caution!
Damage to the appliance
Frozen hoses may rip/burst.
Do not install the washing machine in
areas exposed to frost or outdoors.
Caution!
Water damage
The connection points for the water
supply hose and water drain hose are
under high water pressure. To prevent
leaks and water damage, you must
follow the instructions in this section.
Notes
In addition to the safety information
listed here, the local water and
electricity supplier may have special
requirements.
■
If in doubt, have the appliance
connected by a specialist.
■
Installation on a base or a
wooden joist floor
Caution!
Damage to the appliance
The washing machine may "wander"
and tip/topple from the base when
spinning.
The feet of the appliance must be
secured with holding brackets.
Order no. WMZ 20490,
WZ 20490 WZ 20510, WZ 20520
Note: On wooden joist floors, install the
washing machine:
■
In a corner, if possible,
■
On a water-resistant wooden board
(min. 30 mm thick) which is screwed
tightly to the floor.
Installing the appliance in a
kitchenette
: Warning
Danger of death!
There is a risk of electric shock if you
touch live components.
Do not remove the appliance covering
plate.
Notes
Recess width of 60 cm required.
■
Only install the washing machine
underneath a continuous worktop
that is securely connected to
adjacent cabinets.
■
9
en
Positioning and connecting
Removing the transport locks
Caution!
Damage to the appliance
■
The machine is secured for
transportation using transport locks.
If the transport locks are not
removed, the machine may become
damaged when it is operated.
Before using the appliance for the
first time, make sure that you
completely remove all four transport
locks. Keep the locks in a safe
place.
■
To prevent transport damage from
occurring if the appliance is moved
at a later date, you must refit the
transport locks before transporting
the appliance.
Note: Keep the screws and sleeves in
a safe place.
3. Fit the covers. Lock the covers firmly
in place by applying pressure to the
snap-in hooks.
Hose and cable lengths
■
Left-hand connection
aFP
PD[FP
aFP
■
2. Unscrew and remove all four
transport brace screws.
Remove the sleeves. To do this,
remove the mains cable from the
holders.
aFP
Right-hand connection
aFP
aFP
aFP
10
PD[FP
1. Take the hoses out of the holders.
Positioning and connecting
Tip: The following are available
(depending on model) from specialist
dealers/the after-sales service:
■
An extension for Aqua-Stop or cold
water supply hose (approx. 2.50 m);
order no. WMZ2380, WZ10130,
CZ11350, Z7070X0
■
A longer supply hose (approx.
2.20 m) for standard model
en
If the water pressure is higher than this,
a pressure-reducing valve must be
installed.
Connection
1. Connect the water supply hose to
the water tap (¾" = 26.4 mm) and to
the appliance:
– Model: Standard
Water inlet
: Warning
Risk of death!
There is a risk of electric shock if you
touch live components.
Observe the following when connecting
the machine:
Notes
Only operate the washing machine
using cold mains water.
■
Do not connect the machine to the
mixer tap of an unpressurised hotwater boiler.
■
Do not use a used supply hose. Only
use the supply hose supplied with
the machine or one that was
purchased from an authorised
retailer.
■
Do not bend, squash, modify or cut
through the water supply hose
(otherwise its strength is no longer
guaranteed).
■
Only tighten the screw connections
by hand. If the screw connections
are tightened too much with a tool
(pliers), the thread may be
damaged.
– Model: Aqua­Secure
■
Tip: Connect also an external water
filter between water supply hose and
tap. The filter filters dirt particles out
of the water.
Water filter must be cleaned regularly
to remove contaminants. This will
prevent blockages. See also ~
separate installation and cleaning
instruction for water filter.
2. Open the water tap carefully,
checking the leak tightness of the
connection points. The screw
connection is under mains water
pressure.
Optimum water pressure in the supply
network
At least 100 kPa (1 bar)
Maximum 1000 kPa (10 bar)
When the tap is open, the water flow is
at least 8 l/min.
11
en
Positioning and connecting
Water outlet
Make sure that:
– The plug does not block drainage
from the sink.
– The end of the drain hose is not
immersed in the drained water.
– The water drains away quickly
enough.
Caution!
Water damage
If the drain hose slips out of the wash
basin or the connection point during
draining due to high water pressure, any
escaping water may cause water
damage.
Secure the drain hose so that it cannot
slip out.
Note: Do not kink the water drain hose
or put strain on it lengthways.
You can lay the water drain hose as
follows:
■
Outlet in a sink
: Warning
Risk of scalding!
When you are washing at high
temperatures, there is a risk of
scalding if you come into contact
with hot water e.g. if hot water is
being drained into a wash basin.
Do not reach into the hot water.
Caution!
Damage to the appliance/fabrics
If the end of the drain hose is
immersed in the drained water, water
may be sucked back into the
appliance and may damage the
appliance/fabrics.
12
■
■
Drainage into a siphon
The connection point must be
secured using a hose clamp with a
diameter of 24-40 mm (available
from specialist dealers).
Outlet into a plastic pipe with
rubber bushing or into a drainage
pit
Positioning and connecting
Levelling
Electrical connection
Level the appliance using a spirit level.
Incorrect levelling may result in intense
noise, vibrations and "wandering".
: Warning
1. Loosen the lock nuts using a
wrench, by turning it in a clockwise
direction.
2. Check the alignment of the washing
machine with a spirit level, and
adjust it if necessary. Change the
height by turning the appliance feet.
All four appliance feet must stand
firmly on the ground.
3. Tighten the lock nut against the
housing.
In doing so, hold the foot tight and
do not adjust its height.
The lock nuts on all four appliance
feet must be screwed tightly against
the housing.
en
Danger of death!
There is a risk of electric shock if you
touch live components.
■
Never touch or hold the mains plug
with wet hands.
■
Only pull out the mains cable by the
plug and never by the cable, as this
could damage it.
■
Never unplug the mains plug during
operation.
Observe the following information and
ensure that:
Notes
■
The mains voltage and voltage
indicated on the washing machine
(rating plate) are the same.
The connected load and fuse
required are specified on the rating
plate.
■
The mains plug fits the socket.
■
The cable cross-section is adequate.
■
The mains cable is only replaced by
a qualified electrician (if this is
necessary). Replacement mains
cables are available from the aftersales service.
■
No multiple plugs/couplings or
extension cables are used.
■
If an earth-leakage circuit breaker is
used, only a type which displays this
symbol is used: z.
Only this symbol guarantees
compliance with the currently
applicable regulations.
■
The mains plug can be accessed at
all times.
■
The mains cable is not bent,
squashed, modified, cut through, or
in contact with heat sources.
13
en
Positioning and connecting
Grounding Instructions
: Warning
Danger of death!
Improper connection of the ground may
result in electric shock. Have the
appliance checked by a qualified
technician or licensed electrician if you
are in doubt as to whether the washing
machine has been properly grounded.
This appliance must be grounded. In the
event of malfunction or breakdown,
grounding will reduce the risk of electric
shock by providing a path of least
resistance for the electric current. This
appliance is equipped with a cord that
has an equipment grounding conductor
and a grounding plug. The plug must be
plugged into an appropriate outlet that
is properly installed and grounded in
accordance with local codes and
ordinances. To ground the appliance
use a 3 pin plug and properly grounded
socket of 16 A rating.
Notes
■
Do not modify the plug provided with
the appliance. If the plug will not fit
into outlet have a properly grounded
outlet installed by qualified
electrician. Do not cut, remove or
bypass the grounding prong on the
washing machine power cord plug.
■
The wiring for the eletrical outlet
circuit must be sufficient to meet the
appliance requirements. Use of
Ground Fault Circuit Interrupter
(GFCI) is recommended.
■
Do not use the machine with an
extension box, extension cord, spike
busters etc., as this may lead to
improper grounding conditions.
14
Before washing for the first
time
The washing machine was thoroughly
tested before leaving the factory. In
order to remove any water which may
be left over from the test, run the first
washing cycle without any laundry.
Notes
■
The washing machine must be
correctly installed and connected
~ Page 8
■
Never use a damaged machine.
Inform your after-sales service.
~ Page 30
1. Check the machine.
2. Remove the protective film from the
control panel.
3. Connect the mains plug.
4. Turn on the water tap.
5. Close the washing machine door (do
not load any laundry).
6. Select the l Drum Clean
programme.
7. Open the detergent drawer.
8. Pour approx. 1 litre of water into
compartment II.
9. Pour standard detergent into
compartment II.
Note: To prevent foaming, only use
half of the amount of detergent
recommended by the detergent
manufacturer. Do not use detergent
for wool or delicates.
10. Close the detergent drawer.
11. Press Start/Pause A .
12. Switch off the appliance at the end of
the programme.
Your washing machine is now ready to
use.
Positioning and connecting
Transportation
e.g. when moving home
Preparatory work:
1. Turn off the water tap.
2. Reduce the water pressure in the
supply hose.
Maintenance – filter in the water
supply ~ Page 26
3. Disconnect the washing machine
from the main plug.
4. Drain the remaining detergent
solution.
Maintenance – detergent solution
pump blocked ~ Page 25
5. Remove the hoses.
en
Installing the transport locks:
1. Remove the covers and keep them
in a safe place.
Use a screwdriver if necessary.
2. Insert all four sleeves.
Clip the mains cable securely in the
holders. Insert and tighten the
screws.
Before initial use:
Notes
■
The transport locks must be
removed. ~ Page 10
■
To prevent unused detergent from
flowing straight into the drain during
the next wash: Pour
approximately 1 litre of water into
compartment II and select and start
the Drain [ programme.
15
en
Getting to know the appliance
* Getting to know the appliance
Washing machine
ecnailpehtwonk gnitGe
#
6
7
Detergent drawer ~ Page 22
Controls/display elements
Washing machine door with
window handle
9S Open the washing machine door
9T Close the door
@ Service flap
(
0
8
16
Getting to know the appliance
en
Control panel
#
( Start/Pause for starting,
interrupting and cancelling a
programme
0 additional programme settings
can be selected
Overview of all programme
settings ~ Page 20
8 Status indicators for the
programme progress (programme
sequence):
6 : End
0 : Spin
' : Rinse
N: Wash
< : Ready
@ Programme selector for selecting
a programme and for switching
the machine on and off
17
en
Laundry
Z Laundry
■
Prepare the laundry
yrdnuaL
Caution!
Damage to the appliance/fabrics
Foreign objects (e.g. coins, paper-clips,
needles, nails) may damage the laundry
or components in the washing machine.
Therefore, note the following tips when
preparing your laundry:
■
Empty pockets.
■
■
■
■
■
■
Look out for metal items (paperclips,
etc.) and remove them.
Wash delicates in a laundry bag
(tights, underwired bras, etc.).
Close any zips, button up any cover
buttons.
Brush sand out of pockets and
collars.
Remove curtain fittings or place
curtains in a laundry bag.
Sorting laundry
Sort your laundry according to the care
instructions and manufacturer's
information on the care labels:
■
Type of fabric/fibre
■
Colour
Note: Laundry can discolour or not
be cleaned correctly. Wash white
and coloured laundry separately.
Wash new bright fabrics separately
the first time you wash them.
18
Soiling
Wash laundry with the same level of
soiling together.
You can find examples of levels of
soiling on ~ Page 20
– Light: Do not prewash, select the
Quick e setting if necessary
– Normal
– Heavy: Load less laundry, select
a programme with prewash
– Stains: Remove/pretreat stains
while they are fresh. First, dab the
stain with soapy water/do not
rub. Then wash the items of
laundry with the appropriate
programme. Stubborn/dried-in
stains can sometimes only be
removed with several washes.
Symbols on the care labels
The numbers in the symbols indicate
the maximum washing temperature
which may be used.
– M: Suitable for a normal
washing process; e.g. Cottons
programme
– U : A gentle washing process is
required; e.g. Easy-Care
programme
– V : An especially gentle washing
process is required; e.g.
Delicate/Silk programme
– W : Suitable for washing by
hand; e.g. Wool programme
– Ž : Do not wash the laundry in
the machine.
Starching
Note: Laundry must not be treated with
fabric softener.
Starching is possible in all wash
programmes if liquid starch is used.
Starching with liquid starch is possible
in programs such as Rinse and Cottons
Detergent
Dyeing/bleaching
Dye should only be used in normal
household quantities. Salt may damage
stainless steel. Always follow the dye
manufacturer's instructions.
Do not use the washing machine to
bleach clothes.
Soaking
1. Pour soaking agent/detergent into
compartment II in accordance with
the manufacturer's instructions.
2. Select the desired programme.
3. Press the A button to start the
programme.
4. After approx. ten minutes, press the
A button to pause the programme.
5. After the desired soaking time, press
the A button again to continue or
change the programme.
Notes
■
Load laundry of the same colour.
■
No additional detergent is required;
the soaking solution is used for
washing.
en
C Detergent
Correct selection of detergent
tnegrD
The care label is crucial for selecting
the correct detergent, temperature and
treatment of the laundry.
Note: Only use detergents for frontloading washing machines, low suds/
detergent foam.
■
■
■
■
■
Standard detergent with optical
brighteners
Suitable for boil-washable white
laundry made from linen or cotton
Programme: Cottons/
cold - max. 90 °C
Detergent for colours without
bleach or optical brighteners
Suitable for coloured laundry made
from linen or cotton
Programme: Cottons/
cold - max. 60 °C
Detergent for colours/delicates
without optical brighteners
Suitable for coloured laundry made
from easy-care fibres, synthetic
fibres
Programme: Easy-Care/
cold - max. 60 °C
Detergent for delicates
Suitable for delicate, fine fabrics, silk
or viscose
Programme: Delicate/Silk/
cold - max. 40 °C
Detergent for woollens
Suitable for wool
Programme: Wool/
cold - max. 40 °C
19
en
Additional programme settings
Saving energy and detergent
For light and normal soiling, you can
save energy (lower washing
temperature) and detergent.
\ Additional programme
settings
Prewash T
sgnitemasrgoplanitAd
Saving
Soiling/note
Reduced temperature and detergent quantity as
per the recommended dosage
Light
No visible dirt or stains. Clothing has taken on some body
odour, e.g.:
■
Light summer/sports
clothing (worn for a few
hours)
■
T-shirts, shirts, blouses
(worn for up to one day)
■
Guest bed linen and hand
towels (used for one day)
Normal
Visible dirt or a few light
stains, e.g.:
■
T-shirts, shirts, blouses
(sweat soaked, worn a
few times)
■
Towels, bedding (used for
up to one week)
Temperature as
per the care label
and detergent
quantity as per
the recommended dosage
for heavy soiling
Heavy
Dirt and/or stains clearly visible, e.g. tea towels, baby
items, work clothing
Note: When measuring the amount of
all detergents/additives/care products
and cleaning agents, please always
check the manufacturer's instructions
and information.
~ "Measure and add detergent and
care products" on page 22
20
(Prewash)
Additional Pre-wash at 30°C (including
10 min soaking phase).
Quick e
For washing in a shorter time with a
washing result comparable to that of the
standard programme.
Note: Do not exceed the maximum
load.
Overview of programmes
Operating the appliance
1 Operating the
appliance
Preparing the washing
machine
ecnailpehtgniaOrep
Note: The washing machine must be
correctly installed and connected.
~ Page 8
Also consider ~ "Before washing for
the first time" on page 14
1.
2.
3.
4.
Connect the mains plug.
Turn on the water tap.
Open the door.
Check that the drum is completely
drained. Drain if necessary.
en
The indicator lamp for the button lights
up if a setting is active.
The settings are not saved when the
appliance is switched off.
Additional settings ~ Page 20
Overview of programmes
Placing laundry into the drum
: Warning
Danger of death!
Items of laundry pretreated with
cleaning agents that contain solvents,
e.g. stain remover/cleaning solvent,
may cause an explosion after being
loaded into the washing machine.
Hand-rinse items of laundry thoroughly
beforehand.
Notes
Mix items of laundry of varying sizes.
Laundry items of different sizes
distribute themselves better during
the spin cycle. Individual items of
laundry may lead to imbalances.
■
Observe the specified maximum
load. Overfilling has a negative
impact on the washing result and
promotes creasing.
■
Select programme/switch on
the appliance
Use the programme selector to select
the required programme. Can be turned
in either direction.
The machine is switched on.
Select additional programme
settings
By selecting additional settings, you can
better adapt the washing process to
your items of laundry.
The settings can be selected or
deselected depending on the
programme progress.
1. Place presorted items of laundry
unfolded in the washing drum.
2. Make sure that no items of laundry
are trapped between the washing
machine door and the rubber seal,
and close the door.
The Start/Pause A button indicator
lamp flashes and the programme
settings continue to be displayed on the
display panel one after another. It is
possible to change the settings.
21
en
Operating the appliance
Measure and add detergent
and care products
Caution!
Damage to the appliance
Cleaning agents and agents for
pretreating laundry (e.g. stain removers,
prewash sprays, etc.) may cause
damage if they come into contact with
the surfaces of the washing machine.
Do not allow these agents to come into
contact with the surfaces of the washing
machine. If necessary, immediately wipe
away spray residue and other residues/
droplets with a damp cloth.
Measuring
Measure the detergent and care
products according to:
■
Water hardness; ask your water
supply company
■
The manufacturer's instructions on
the packaging
■
The amount of laundry
■
Soiling
Filling
: Warning
Eye/skin irritation!
Detergent and care products may spray
out if the detergent drawer is opened
while the machine is in operation.
Open the drawer carefully.
Rinse eyes or skin thoroughly if they
come into contact with detergent/care
products.
If swallowed accidentally, seek medical
advice.
Note: Dilute viscous fabric softener and
fabric conditioner with water; this
prevents blockages.
22
Pour the detergent and care products
into the appropriate compartments:
Measuring aid A* For liquid detergent
Compartment II Detergent for the
main wash, water
softener, bleach,
stain remover
Compartment i Fabric softener,
starch
Do not exceed the
max.
Compartment I
Detergent for
prewash
1. Pull out the detergent drawer as far
as possible.
2. Add detergent and/or care products.
3. Close the detergent drawer.
Measuring aid* for liquid detergent
*depending on the model
Position the measuring aid for
measuring the correct amount of liquid
detergent:
1. Pull out the detergent drawer. Press
down the insert and fully remove the
drawer.
2. Slide the measuring aid forwards,
fold it down and click it into place.
3. Reinsert the drawer.
Operating the appliance
Note: Do not use the measuring aid for
gel detergents and washing powder, or
for programmes with prewash or when
"Ready in" time is selected.
For models without a measuring aid,
pour the liquid detergent into the
appropriate dispenser and place it in
the drum.
Starting the programme
Select the Start/Pause A button. The
indicator lamp lights up and the
programme starts.
During the programme status indicators
show programme progress (programme
sequence).
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
1. Press Start/Pause A .
2. Select the other programme.
3. Press Start/Pause A . The new
programme starts from the
beginning.
Cancel the programme
Programmes at high temperatures:
1. Press Start/Pause A .
2. To cool the laundry: Select O Rinse.
3. Press Start/Pause A .
For programmes at low temperatures:
1. Press Start/Pause A .
2. Select 0 Spin or Drain [ .
3. Press Start/Pause A .
en
Programme end
Indicator lamp 0 for f flashes and the
Start/Pause A button indicator lamp is
off.
Removing laundry/switching
off the appliance
1. Open the washing machine door
and remove the laundry.
2. Set the programme selector to off
position. The appliance is switched
off.
3. Turn off the water tap.
Notes
■
Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
■
Remove any foreign objects from the
drum and the rubber seal – risk of
rusting.
■
■
■
Leave the washing machine door
and detergent drawer open so that
any residual water can dry away.
Always wait for the end of the
programme, otherwise the appliance
may still be locked. Then switch on
the appliance and wait for it to
unlock.
If the display panel goes off at the
end of a programme, energy-saving
mode is active. To activate the panel,
press any button.
23
en
Sensors
The automatic load-sensing function
perfectly adapts the water consumption
to each programme depending on the
type of fabric and the load.
Caution!
Damage to the appliance
Cleaning agents that contain solvents,
e.g. cleaning solvent, can damage
surfaces and components in the
machine.
Do not use cleaning agents that contain
solvents.
Unbalanced load detection
system
Machine housing/control
panel
H Sensors
Automatic load sensing
sroSne
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping the drum spinning.
If the laundry is extremely unevenly
distributed, the spin speed is reduced
or the spin cycle is not performed for
safety reasons.
Note: Place large and small items of
laundry evenly in the drum.
~ "Faults and what to do about them"
on page 27
2 Cleaning and
maintenance
: Warning
Danger of death!
There is a risk of electric shock if you
touch live components.
Switch off the appliance and unplug the
mains plug.
ecnatmidgnaeCl
: Warning
Risk of poisoning!
Toxic vapours can be produced by
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.
24
■
■
■
Wipe the housing and the control
panel with a soft, damp cloth.
Remove the detergent residue
immediately.
Do not clean with a water jet.
Drum
Use chlorine-free cleaning agents and
not steel wool.
Descaling
Descaling should not be necessary if
the detergent is measured out correctly.
However, if it is required, follow the
manufacturer's instructions for the
descaling agent. Suitable descalers can
be obtained via our website or from our
after-sales service. ~ Page 30
Cleaning and maintenance
en
Detergent drawer and housing
If the washing machine contains
detergent or fabric softener residues:
1. Pull out the detergent drawer. Press
down the insert and fully remove the
drawer.
2. To remove the insert: Push the insert
upwards from below with your finger.
3. Clean the detergent dispenser tray
and insert with water and a brush,
and dry it. Clean the inside of the
housing as well.
4. Fit the insert and lock it in place
(push the cylinder onto the guide
pin).
5. Push in the detergent drawer.
Note: Leave the detergent drawer open
so that any residual water can
evaporate.
Detergent solution pump
blocked
4. Take the drain hose out of the
retainer.
Remove the sealing cap, allow the
detergent solution to flow out into a
suitable container.
Replace the sealing cap and place
the drainage hose in the retainer.
5. Carefully unscrew the pump cover,
residual water may leak out.
Clean the interior, pump cover
thread and pump housing. The
impeller in the detergent solution
pump must be able to rotate.
Refit the pump cover and screw it on
tightly. The handle must be in a
vertical position.
: Warning
Risk of scalding!
When you wash at high temperatures,
the water gets very hot. If you come into
contact with the hot water, you may be
scalded.
Allow the water to cool down.
1. Turn off the water tap so that no
more water can flow in and has to be
drained via the drain pump.
2. Switch off the appliance. Disconnect
the mains plug.
3. Open and remove the service flap.
6. Place the service flap back on, lock
it into place, and close it.
25
en
Cleaning and maintenance
Note: To prevent unused detergent
from flowing straight into the drain
during the next wash: Pour 1 litre of
water into compartment II and start the
Drain [ programme.
The drain hose at the siphon
is blocked
1. Switch off the appliance. Disconnect
the mains plug.
2. Loosen the hose clamp. Carefully
remove the drain hose; residual
water may leak out.
3. Clean the drain hose and siphon
connecting piece.
6. For standard and Aqua-Secure
models, clean the filter on the rear of
the appliance:
Remove the hose from the rear of
the appliance,
Remove the filter using pliers and
clean the filter.
7. Connect the hose and check for
leaks.
4. Reattach the drain hose and secure
the connection using the hose
clamp.
Filter in the water supply is
blocked
For this, first reduce the water pressure
in the supply hose:
1. Turn off the water tap.
2. Select any programme
(except O Rinse//Drain [ ).
3. Press Start/Pause A . Allow the
programme to run for approximately
40 seconds.
4. Set the programme selector to off
position. Disconnect the mains plug.
5. Clean the filter on the water tap:
Remove the hose from the water tap.
Clean the filter with a small brush.
26
Faults and what to do about them
3 Faults and what to do
about them
Emergency release
meht uobadt wahdnstluFa
(depending on the model)
e.g. in the event of a power outage
Note: The programme will continue
running when the power supply has
been restored.
: Warning
Risk of scalding!
When you are washing at high
temperatures, there is a risk of scalding
if you come into contact with detergent
solution and laundry.
If possible, leave it to cool down.
en
Caution!
Water damage
Any escaping water may cause water
damage. Do not open the washing
machine door if water can be seen
through the glass.
If the laundry has to be removed, the
washing machine door can be opened
as follows:
1. Switch off the appliance.
2. Disconnect the mains plug.
3. Drain the water. ~ Page 25
4. Pull the emergency release
downwards with a tool and release.
The washing machine door can now
be opened.
: Warning
Risk of injury!
You may injure your hands if you reach
into the drum while it is turning.
Do not reach into the drum when it is
turning. Wait until the drum has stopped
turning.
27
en
Faults and what to do about them
Information on the display panel
Display
Cause/remedial action
Note: Indicator lights for status displays and/or buttons flash:
Indicator lights O
und N flash.
Indicator lights 0
und N flash.
Close the washing machine door properly, laundry may be caught.
■
■
■
Indicator lights 0
und O flash.
■
■
All indicator lights flash.
Turn the water tap on fully,
The supply hose is kinked/trapped,
The water pressure is too low.
– Clean the filter. ~ Page 26
– If an additional water filter has been installed (depending on model)
~ Page 11, check for contaminants and clean if required ~ separate installation and cleaning instruction for water filter.
The detergent solution pump is blocked. Clean the detergent solution
pump. ~ Page 25
The drain hose/waste pipe is blocked. Clean the drain hose at the siphon.
~ Page 26
Turn off the tap and call the after-sales service. ~ Page 30
Faults and what to do about them
Faults
Cause/remedial action
Water is leaking out.
■
■
No water supply.
Detergent not dispensed.
■
■
■
■
Washing machine door
cannot be opened.
■
■
Programme does not
start.
Detergent solution is not
emptied.
Water not visible in the
drum.
28
■
■
■
■
Attach/replace the drainage hose correctly.
Tighten the screw connection of the supply hose.
Start/Pause A not pressed?
Tap not turned on?
Filter blocked? Clean the filter. ~ Page 26
Note: If an additional water filter has been installed (depending on model)
~ Page 26, check for contaminants and clean if required ~ separate
installation and cleaning instruction for water filter.
Supply hose kinked or trapped?
Safety function active.
Note: For safety reasons, the washing machine door remains locked when
the water level or temperature is high (See ~ Cancel the programme
~ Page 23) or while the drum is rotating.
Can be opened by emergency release only? ~ Page 27
Start/Pause A pressed?
Washing machine door closed?
Clean the detergent solution pump. ~ Page 25
Clean the waste pipe and/or drainage hose. ~ Page 26
Not a fault – water below the visible area.
Faults and what to do about them
en
Faults
Cause/remedial action
Spin result not satisfactory.
Laundry wet/too damp.
Not a fault – the unbalanced load detection system has interrupted the spin
because the laundry is unevenly distributed.
Distribute large and small items of laundry evenly in the drum.
Spin cycle started and
stopped several times.
Not a fault – the unbalanced-load detection system is adjusting the imbalance.
The programme duration
is longer than usual.
■
■
Not a fault – the unbalanced-load detection system is adjusting the imbalance by repeatedly distributing the laundry.
Not a fault – the foam detection system active – adds an additional rinse
cycle.
The programme duration Not a fault – the programme sequence is optimised for the particular washing
changes during the wash process. This may lead to occasional changes in the programme duration in the
cycle.
display panel.
Residual water in the
compartment i for care
products.
Odours in the washing
machine.
Foam escapes from the
detergent drawer.
■
■
Run the l Drum Clean programme without laundry. Use standard detergent.
■
■
Intense noise, vibrations
and "wandering" during
spinning.
Indicator lamps do not
function during operation.
■
■
■
■
■
■
Detergent residues on the
laundry.
Not a fault – the effect of the care product is not affected.
Clean the insert if necessary.
■
■
Too much detergent used?
Mix one tablespoon of fabric softener with 1/2 litre water and pour into
compartment II (not for outdoor fabrics, sportswear fabrics or those made
with down).
Reduce the detergent dosage for the next wash cycle.
Improper detergent use? Only use detergent suitable for front-loading
washing machines.
Is the appliance levelled? Level the appliance. ~ Page 13
Are the appliance feet fixed? Secure the appliance feet. ~ Page 13
Transport locks removed? Remove the transport locks. ~ Page 10
Power cut?
Circuit breakers tripped? Switch the circuit breakers back on or replace
them.
If the fault occurs repeatedly, call the after-sales service. ~ Page 30
Occasionally, phosphate-free detergents contain water-insoluble residues.
Select O Rinse or brush the laundry after washing.
If you cannot correct a fault yourself (after switching off/on) or a repair is required:
■
Set the programme selector to off position. The appliance is switched off.
■
Unplug the mains plug from the socket.
■
Turn off the tap and call the after-sales service. ~ Page 30
29
en
After-sales service
4 After-sales service
If you cannot correct the fault yourself
~ "Faults and what to do about them"
on page 27 please contact our aftersales service. ~ Back page
We will always find an appropriate
solution in order to avoid unnecessary
visits by engineers.
Please give the after-sales service the
product number (E no.) and the
production number (FD) of the
appliance.
ecivrsela-rtAf
(1U
Product number
)'
Production number
You can find this information:
■
on the inside of the washing
machine door*
■
in the opened service flap*
■
on the rear of the appliance*
*depending on the model
Trust the expertise of the
manufacturer.
Contact us for assistance. By doing so,
you will ensure that the repairs are
carried out by trained service personnel
using genuine spare parts.
30
J Technical data
Dimensions:
850 x 600 x 590 mm
(Height x width x depth)
Weight
63-83 kg (depending on model)
Mains connection:
Mains voltage 220-240 V, 50 Hz
Nominal current 10 A
Nominal input 2200-2400 W
Water pressure:
100-1000 kPa (1-10 bar)
atdlcinhTe
6
7
Advice and repair order in the event of faults
GB
IE
0344 892 8979 (Calls charged at local or mobile rate.)
01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.)
Robert Bosch Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München, GERMANY
*9001190635*
9001190635 (9606)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising