Bosch | WTYH6790GB | Instruction manual | Bosch WTYH6790GB WTYH6790GB Instruction manual

Tumble dryer
WTYH6790GB
en Installation and operating instructions
Your new tumble dryer
Display rules
You have opted for a tumble dryer
manufactured by Bosch.
: Warning!
Please take a few minutes to read and
become familiar with the advantages of
your tumble dryer.
To meet the high quality demands
required by Bosch, every tumble dryer
that leaves our factory is carefully
checked to ensure that it functions
correctly and is in perfect condition.
For more information on our products,
accessories, replacement parts and
services, see our website www.boschhome.com or contact our Customer
Service centres.
If the operating and installation
instructions describe different models,
any differences will be pointed out at the
relevant points in the text.
This combination of symbol and signal
word indicates a possibly dangerous
situation. Not heeding the warning can
cause death or injuries.
Caution!
This signal word indicates a possibly
dangerous situation. Not heeding the
caution can cause property and/or
environmental damage.
Note/tip
Information about the optimum use of
the appliance/any other useful
information.
1. 2. 3. / a) b) c)
The steps are represented by numbers
or letters.
■
Read these operating and installation
instructions before operating the tumble
dryer.
2
/-
Lists are represented by a small box or
a dash.
en
Contents
enI stal tionandoperatinginstructions
8 Intended use. . . . . . . . . . . . . . . . .4
( Safety instructions . . . . . . . . . . .4
Children/people/pets .
Installation. . . . . . . . . .
Operation . . . . . . . . . .
Cleaning/Maintenance
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
..4
..5
..7
. 10
7
Environmental protection . . . . .12
Packaging/old appliance . . . . . . . . . 12
Coolant . . . . . . . . . . . . . . . . . . . . . . . 12
Energy-saving tips. . . . . . . . . . . . . . . 12
5 Installation and connection . . .13
Scope of delivery . . . . . . . . . . . . . .
Installing and connecting the dryer.
Changing the condensation drain. .
Changing the side on which
the door is hinged . . . . . . . . . . . . .
Optional accessories . . . . . . . . . . .
Transport and frost protection . . . .
. 13
. 13
. 14
. 16
. 19
. 19
Y The main points in brief . . . . . .20
* Getting to know
your appliance . . . . . . . . . . . . . .21
Dryer. . . . . . . . . . . . . . . . . . . . . . . . . 21
Control panel . . . . . . . . . . . . . . . . . . 22
Buttons . . . . . . . . . . . . . . . . . . . . . . . 22
Display panel . . . . . . . . . . . . . . . . . . 23
Z Laundry
. . . . . . . . . . . . . . . . . . .24
Preparing the laundry . . . . . . . . . . . . 24
Sorting washing according to: . . . . . 24
/ Programmes and buttons . . . . .25
Programmes . . . . . . . . . . . . . . . . . . . 25
Buttons . . . . . . . . . . . . . . . . . . . . . . . 27
1 Operating the appliance . . . . . .29
Loading laundry and switching
on the dryer . . . . . . . . . . . . . . . . . . . 29
Setting a programme . . . . . . . . . . . . 29
Starting the programme . . . . . . .
Programme sequence . . . . . . . . .
Changing the programme
or adding laundry . . . . . . . . . . . .
Cancelling the programme . . . . .
Programme end . . . . . . . . . . . . .
Removing laundry and switching
off the dryer . . . . . . . . . . . . . . . . .
Clean the fluff filter . . . . . . . . . . .
Emptying the condensate
container . . . . . . . . . . . . . . . . . . .
. . .29
. . .30
. . .30
. . .30
. . .30
. . .30
. . .31
. . .32
o Home Connect . . . . . . . . . . . . . . 33
Connecting to your home network
automatically . . . . . . . . . . . . . . . . .
Connecting to your home network
manually . . . . . . . . . . . . . . . . . . . .
Connecting to the Home Connect
app . . . . . . . . . . . . . . . . . . . . . . . .
Switching Wi-Fi on and off . . . . . . .
Resetting your network settings . .
Updating the software . . . . . . . . . .
About data protection . . . . . . . . . .
Declaration of Conformity . . . . . . .
. .33
. .34
.
.
.
.
.
.
.35
.36
.36
.37
.38
.38
> Noises . . . . . . . . . . . . . . . . . . . . 39
D Cleaning . . . . . . . . . . . . . . . . . . . 40
Cleaning the dryer and
the control panel . . . . . . . . . . . . . . . .40
Cleaning the moisture sensor . . . . . .40
Cleaning the filter
in the condensate container . . . . . . .41
3 Faults and what to
do about them . . . . . . . . . . . . . . 42
[
Consumption values . . . . . . . . . 44
Consumption values table . . . . . . . . .44
Most efficient programme
for cotton fabrics . . . . . . . . . . . . . . . .44
J Technical data . . . . . . . . . . . . . . 45
J After-sales service . . . . . . . . . . 46
3
en
Intended use
8 Intended use
■
esudntI
■
■
■
This appliance is intended for private
domestic use only.
Do not install or operate this
appliance anywhere that is liable to
experience frost and/or outdoor
conditions. There is a risk that the
appliance will be damaged if
residual water in it freezes. If hoses
freeze up, they may crack/burst.
This appliance must only be used for
drying and freshening up domestic
laundry, consisting of items that have
been washed with water and are
suitable for tumble drying (see label
on item). Using the appliance for any
other purpose is outside of the
scope of its intended application and
is forbidden.
This appliance is intended for use up
to a maximum height of
4000 metres above sea level.
Before you switch on the appliance:
Check that there is no visible damage to
the appliance. Do not operate the
appliance if it is damaged. Should you
have any problems, please contact your
specialist dealer or our customer
service.
Read and follow the operating and
installation instructions and all other
information provided with this appliance.
Retain the documents for subsequent
use or for subsequent owners.
( Safety instructions
The following safety information
and warnings are provided to
protect you from injury and to
prevent material damage to
your surroundings.
It is nevertheless important to
take the necessary precautions
and to proceed with care when
installing, maintaining, cleaning
and operating the appliance.
snoitcursniyteSfa
Children/people/pets
: Warning
Risk of death!
Children and other people who
are unable to assess the risks
involved when using the
appliance may injure
themselves or may find
themselves in life-threatening
situations. Therefore please
note:
■
■
4
The appliance may be used
by children over the age of 8
years and by persons with
reduced physical, sensory or
mental capacity or by
persons with a lack of
experience or knowledge as
long as they are supervised
or have received instruction
on how to use the appliance
safely and they have
understood the potential
risks of using the appliance.
Children must not play with
this appliance.
Safety instructions
■
■
■
Do not allow children to
clean or maintain this
appliance unsupervised.
Keep children under 3 years
and pets away from this
appliance.
Do not leave the appliance
unattended when children or
other people who are unable
to assess the risks are in the
vicinity.
: Warning
Risk of death!
Children may lock themselves
inside appliances and find
themselves in a life-threatening
situation.
■
■
Do not position the
appliance behind a door, as
this may obstruct the
appliance door or prevent it
from opening completely.
Once an appliance has
reached the end of its life,
pull the mains plug from the
socket before severing the
mains cable, and then
destroy the lock on the
appliance door.
: Warning
Risk of suffocation!
If allowed to play with the
packaging/plastic film or
packing components, children
may become caught in these or
pull them over their heads and
suffocate.
en
Keep packaging, plastic film
and packing components away
from children.
: Warning
Risk of poisoning!
Detergents and care products
may result in poisoning if
consumed.
If accidentally swallowed, seek
medical advice. Keep
detergents and care products
out of the reach of children.
: Warning
Eye/skin irritation!
Contact with detergents or care
products may cause eye/skin
irritation.
Rinse eyes/skin thoroughly if
they/it come(s) into contact
with detergents or care
products. Keep detergents and
care products out of the reach
of children.
Installation
: Warning
Risk of electric shock/fire/
material damage/damage to
the appliance!
If the appliance is not installed
properly, this may lead to a
dangerous situation. Make sure
that:
5
en
■
■
■
■
■
■
Safety instructions
The mains voltage on your
power socket matches the
rated voltage specified on
the appliance (identification
plate). The connected loads
and the required fuse
protection are specified on
the identification plate.
The appliance is only
connected to a source of
alternating current via a
nationally recognized and
grounded outlet that has
been correctly installed.
The mains plug and the
grounded socket match and
the earthing system has
been correctly installed.
The cross section of the
cable is sufficiently large
enough.
The mains plug is accessible
at all times.
If using a residual current
circuit breaker, only use one
that bears the following
mark: z. The presence of
this mark is the only way to
be sure that it fulfils all the
applicable regulations.
: Warning
Risk of electric shock/fire/
material damage/damage to
the appliance!
If the appliance's mains cable is
altered or damaged, this may
result in electric shock, short
circuiting or fire due to
overheating.
The mains cable must not be
kinked, crushed or altered, and
6
must not come into contact with
any heat sources.
: Warning
Risk of fire/material damage/
damage to the appliance!
The use of extension cords or
power strips may result in fire
due to overheating or short
circuiting.
Connect the appliance directly
to an earthed socket that has
been correctly installed. Do not
use extension cords, power
strips or multi-way couplers.
: Warning
Risk of injury/material
damage/damage to the
appliance!
■
The appliance may vibrate or
move when in operation,
potentially resulting in injury
or material damage.
Place the appliance on a
clean, even, solid surface
and, using a spirit level to
guide you, level it with the
screw-in feet.
Risk of injury/material damage/damage to the appliance!
Safety instructions
Incorrectly placing (stacking)
this appliance on top of a
washing machine may result
in injury, material damage
and/or damage to the
appliance.
If this appliance is to be
placed on top of a washing
machine, the washing
machine must be of at least
the same depth and width as
the appliance, and it must be
secured in place with the
appropriate connection set if
available ~ Page 19. The
appliance MUST be secured
with this connection set.
Stacking the appliance in
any other way is forbidden.
Ri■sk of inIfjury/materi
al damage/damage
appliance! of any of the
you
taketo thehold
appliance's protruding parts
(e.g. the appliance door) in
order to lift or move it, these
parts may break off and
cause injury.
Do not take hold of any of
the appliance's protruding
parts in order to move the
appliance.
■
The appliance has sharp
edges on which you could
cut your hands.
Do not take hold of the
appliance by its sharp
edges. Wear protective
gloves to lift it.
Ri■sk of inIfjury! the hoses and mains
cables are not correctly
routed, they may constitute a
tripping hazard, which may
result in injury.
Route hoses and cables
such that they do not
constitute a tripping hazard.
■
Operation
: Warning
Risk of explosions/fire!
Laundry that has come into
contact with solvents, oil, wax,
wax remover, paint, grease or
stain remover may ignite when
dried in the machine, or even
cause the appliance to explode.
Therefore please note:
■
: Warning
Risk of injury!
The appliance is very heavy.
Lifting it may result in injury.
Do not lift the appliance on
your own.
en
■
■
Risk of injury!
■
Rinse the laundry thoroughly
with warm water and
detergent before drying it in
the machine.
Do not place laundry in this
appliance to be dried if the
laundry has not been
washed first.
Do not use the appliance if
industrial chemicals have
been used to clean the
laundry.
7
en
Safety instructions
: Warning
Risk of explosions/fire!
■
If there is any residual
material left in the fluff filter,
this may ignite when drying
is in progress, or even cause
the appliance to catch fire or
explode.
Clean out the fluff filter each
time the appliance is used to
dry laundry.
Risk of expl
osions/fire!
■
Certain
objects may ignite
when drying is in progress,
or even cause the appliance
to catch fire or explode.
Remove any lighters or
matches from pockets on
items of clothing.
Risk of expl
ons/fire!
■
Ifosithere
is coal dust or flour in
the air around the appliance,
this may cause an explosion.
Make sure that the area
around the appliance is kept
clean when it is in operation.
: Warning
Risk of fire/material damage/
damage to the appliance!
If a program is terminated
before the drying cycle has
finished, this prevents the
laundry from cooling down
sufficiently and may cause the
laundry to ignite, or may result
in material damage or damage
to the appliance.
8
■
■
During the last part of the
drying cycle, the laundry in
the drum is not heated
(cooling cycle). This is to
ensure that it remains at a
temperature at which it will
not be damaged.
Do not switch off the
appliance before the drying
cycle has finished unless you
remove all items of laundry
from the drum immediately
and spread them out (to
dissipate the heat).
: Warning
Risk of poisoning/material
damage!
Condensation water is not
suitable for drinking and may
be contaminated with lint.
Contaminated condensation
water may be hazardous to
health and may cause material
damage.
Do not drink or reuse.
: Warning
Risk of poisoning!
Poisonous fumes may be given
off by cleaning agents that
contain solvents, e.g. cleaning
solvent.
Do not use cleaning agents that
contain solvents.
Safety instructions
: Warning
Risk of injury!
■
If you support your weight/sit
on the appliance door when
it is open, the appliance may
tip over, which may result in
injury.
Do not support your weight
on the appliance door when
it is open.
Risk of inIfjury! you climb onto the
■
appliance, the worktop may
break, which may result in
injury.
Do not climb onto the
appliance.
Risk of inIfjury! you reach into the drum
■
while it is still rotating, you
risk injuring your hands.
Wait until the drum has
stopped rotating.
Caution!
Material damage/damage to
the appliance
■
If the amount of laundry in
the appliance exceeds its
maximum load capacity, it
may not be able to operate
properly, or this may result in
material damage or damage
to the appliance.
Do not exceed the maximum
load capacity of dry laundry.
Make sure you comply with
the maximum load capacities
specified for each of the
programs ~ Page 25.
en
If you operate the appliance
without a fluff filter, or if the
fluff filter is defective, this
may result in damage to the
appliance.
Do not operate the appliance
without a fluff filter, or with a
fluff filter that is defective.
Materi
damage/damageobjects
to the appliance
■ alLight
such as hair
and lint may be sucked into
the air inlet when the
appliance is in operation.
Keep these away from the
appliance.
Materi
damage/damage toand
the appliance foam rubber may
■ alFoam
deform or melt if dried in the
appliance.
Do not dry laundry items that
contain foam or foam rubber
in the appliance.
Materi
damage/damage
the appliance the wrong
■ alIf
you topour
quantity of detergent or
cleaning agent into the
appliance, this may result in
material damage or damage
to the appliance.
Use detergents/care
products/cleaning agents
and softeners in accordance
with the manufacturers'
instructions.
■
Material damage/damage to the appliance
Material damage/damage to the appliance
9
en
■
Safety instructions
If the appliance overheats, it
may not be able to operate
properly, or this may result in
material damage or damage
to the appliance.
Make sure that the
appliance's air inlet is never
obstructed when the
appliance is in operation,
and that the area around the
appliance is adequately
ventilated.
Cleaning/Maintenance
: Warning
Danger of death!
The appliance is powered by
electricity. There is a risk of
electric shock if you come into
contact with live components.
Therefore please note:
■
■
■
■
10
Switch off the appliance.
Disconnect the appliance
from the power supply (pull
out the plug).
Never take hold of the mains
plug with wet hands.
When removing the mains
plug from the socket, always
take hold of the plug itself
and never the mains cable,
otherwise this may damage
the mains cable.
Do not make any technical
modifications to the
appliance or its features.
■
■
Repairs and any other work
on the appliance must only
be conducted by our
customer service or by an
electrician. The same applies
for replacing the mains cable
(when necessary).
Spare mains cables can be
ordered from our customer
service.
: Warning
Risk of poisoning!
Poisonous fumes may be given
off by cleaning agents that
contain solvents, e.g. cleaning
solvent.
Do not use cleaning agents that
contain solvents.
: Warning
Risk of electric shock/material
damage/damage to the
appliance!
If moisture penetrates the
appliance, this may cause it to
short circuit.
Do not use a pressure washer
or steam cleaner to clean your
appliance.
Safety instructions
en
: Warning
Risk of injury/material
damage/damage to the
appliance!
The use of spare parts and
accessories supplied by other
brands is dangerous and may
result in injury, material damage
or damage to the appliance.
For safety reasons, use
genuine spare parts and
accessories only.
Caution!
Material damage/damage to
the appliance
Cleaning agents and agents for
pretreating laundry (e.g. stain
removers, prewash sprays, etc.)
may cause damage if they
come into contact with the
surfaces of the appliance.
Therefore please note:
■
■
■
Do not allow these agents to
come into contact with the
surfaces of the appliance.
Clean the appliance with
nothing but water and a soft,
damp cloth.
Remove any detergent,
spray or other residues
immediately.
11
en
Environmental protection
Energy-saving tips
7 Environmental
protection
■
Packaging/old appliance
noitceorplamnoteriEv
)
Dispose of packaging in an
environmentally-responsible manner.
This appliance is designated according
to European directive 2012/19/EC
which governs waste electrical and
electronic equipment (WEEE).
The directive provides a framework for
the collection and recycling of old
appliances, which is valid across
the EU.
Coolant
■
■
■
The dryer's heat exchanger contains
fluorinated greenhouse gas in a
hermetically sealed unit.
Greenhouse gas:
R407c
Filling quantity (kg):
0.290
Total GWP (tCO2):
0.514
Dispose of the dryer properly.
12
■
Spin the laundry before drying.
The drier the laundry, the shorter
the drying time will be, thus
consuming less energy.
Load the dryer with the maximum
load.
Note: Do not exceed the maximum
load for the programs, as this
prolongs the drying time
and increases energy consumption.
Ventilate the room and keep the air
inlet on the dryer free to ensure air
exchange.
Clean the fluff filter after each drying
cycle. If the fluff filter is dirty,
the drying time is prolonged
and energy consumption is
increased.
Energy saving mode: If the dryer is
not operated for a prolonged period,
it automatically switches off before
the program starts and when
the program has ended to save
energy. The display panel
and indicator lamps go off after
a few minutes and the Start button
flashes. To activate the lighting,
press any button, open or close
the dryer door or turn the program
selector.
Installation and connection
5 Installation and
connection
Scope of delivery
noitcednaoitlasnI
■
■
■
■
Dryer
Installation and operating
instructions
Basket for woollens*
Condensation drain*
Installing and connecting the
dryer
: Warning
Risk of death!
There is a risk of electric shock as the
dryer is operated with electricity.
■
Check the dryer for visible damage.
You must not operate the dryer if it is
damaged.
■
Before connecting the dryer to the
power supply, ensure that the
electric voltage specified on the
rating plate matches the voltage of
your socket.
■
Only use residual current circuit
breakers with the following symbol:
z.
■
Ensure that the mains cable is not
kinked or trapped and that it does
not come into contact with heat
sources or sharp edges.
: Warning
■
■
en
You could cut your hands on the
sharp edges of the dryer. Do not
hold the dryer by the sharp edges.
Protruding parts on the dryer may
break off when it is lifted or pushed.
Do not move the dryer by holding on
to protruding parts.
Caution!
Risk of material damage to the dryer or
fabrics
■
Check the dryer for damage caused
during transportation. Never operate
a dryer if it is damaged.
■
Any residual water in the dryer may
freeze and damage the dryer. Do not
install the dryer in rooms that are at
risk of frost.
During installation ensure that:
■
The dryer is placed on a clean, level
and firm surface,
■
The mains plug can be accessed at
all times,
■
The air inlet on the dryer is kept clear
and there is sufficient ventilation,
■
The area around the dryer is kept
clean and
■
The dryer is levelled using the
threaded feet.
Note: Check the alignment of the
appliance with a spirit level and
correct if necessary. Change the
height by turning the appliance feet.
All appliance feet must stand firmly
on the ground.
Children could lock themselves in the
dryer, putting their lives at risk!
Do not set up the dryer behind a door
or sliding door as this may obstruct the
dryer door or prevent it from opening.
Caution!
Risk of injury
■
As the dryer is heavy, you could
injure yourself by trying to lift it.
Do not lift the dryer on your own.
*
Depending on the model
Incorrect alignment may cause high
noise levels, vibrations and improper
movement of the drum.
Note: If in doubt, have the appliance
connected by a specialist.
13
en
Installation and connection
Changing the condensation
drain
Notes
■
The condensation from the dryer can
either be discharged into the
condensation container or drained
off via a connection to the wastewater system. By default, the
condensation from the dryer is
discharged into the condensation
container.
■
If the condensation drain is installed,
residual water remains in the
condensation container due to the
dryer's self-cleaning function.
Proceed as follows to change the
condensation drain:
1. Remove the accessories from the
dryer drum.
2. When the dryer is delivered from the
factory, the hose for discharging the
condensation into the condensation
container is fastened to the
connecting piece.
3. Disconnect the hose from the
connecting piece and put it in the
"parked" position.
14
4. Take the drain hose from the
accessories and secure it to the free
connecting piece.
Installation and connection
en
5. Fasten the other end of the drain hose with the remaining accessories,
depending on the connection situation (A, B or C).
&
$
&
%
PD[FP
$
&
PD[FP
$
PLQFPPD[FP
Caution!
Accumulated water can be drawn back into the dryer and may cause material
damage.
Check that the water drains away from the wash basin quickly. The drain must
not be sealed or blocked.
Caution!
Material damage due to leaks or draining water.
Secure the drain hose so that it cannot slip out.Do not kink the drain hose.
Ensure that a height difference of max. 100 cm and min. 80 cm between the
installation surface and the drain is maintained for drainage into a siphon.
15
en
Installation and connection
6. Pull out the condensation container
fully.
9. Slide in the condensation container
until it clicks into place.
7. Turn the condensation container
180° onto its underside and remove
the stopper that is fitted.Turn the
condensation container back over
and insert the stopper into the
recess in the top of the
condensation container.
The condensation is now discharged via
the drain hose into the waste-water
system or into a wash basin
Note: If you want to change the
condensation drain back to the
condensation container, carry out all
these steps in reverse order.
Changing the side on which
the door is hinged
8. Pull the filter out of the lock-in slot
and place it into the recess in the top
of the condensation container.
16
Proceed as follows to change
the side on which the door is hinged:
1. Set the programme selector to the
"Off" position, disconnect the dryer
from the mains and open the door.
Installation and connection
2. Remove the screws from the dryer
and then remove the dryer door.
Note: Use a T20 (Torx) screwdriver
only. Do not use any other tools to
change the side on which the door is
hinged.
en
5. Remove the screws from the door
handle on the dryer door and
remove the door handle.
6. Unlock the door ring.
3. Carefully place the dryer door onto a
flat surface, and place a hand towel
or other such item between the door
and the surface to avoid scratching
or damaging the door.
7. Now lift the dryer door from the door
ring. Rotate the dryer door and place
it back onto the door ring in the
corresponding place.
4. Now remove the screws from the
door hinge, and remove the hinge
from the dryer door.
8. Lock the door ring back in place.
17
en
Installation and connection
9. Put the door hinge and door handle
in place as shown in the picture, and
screw them back onto the dryer
door.
12. Insert the door lock (1.) on the other
side of the dryer and screw the
cover (2.) back on.
13. Now also screw the dryer door back
on.
10. Remove the cover from the door
lock on the dryer and place it to one
side.
11. Remove the door lock.
18
14. You can now reconnect the dryer,
close the door and start a
programme.
Installation and connection
en
Optional accessories
Transport and frost protection
Order optional accessories* from the
after-sales service:
1. Empty the condensate container.
2. Select any programme using
the programme selector.
3. Press the Start button.
4. Wait for 5 minutes.
Note: The condensation is drained.
5. Empty the condensate container
again.
6. Switch off the dryer.
■
■
*
Washer-dryer stack connection set:
To save space, the dryer can be
placed on top of a suitable washing
machine of the same width and
depth.
The dryer must be secured to the
washing machine using this
connection set.
Order number with pull-out worktop:
WTZ11400;
Order number without pull-out
worktop: WTZ20410.
Platform:
For easier loading and unloading,
raise your dryer with a platform.
Transport laundry with the clothes
basket integrated into the platform
drawer.
Order number: WMZ20500.
Note: Despite draining, there will
always be some residual water in
the dryer.
Caution!
Any residual water may leak out
and cause material damage.
Transport the dryer in an upright
position.
Caution!
The dryer contains coolant and may be
damaged.
Allow the dryer to rest for two hours
before initial use.
Depending on the model
19
en
The main points in brief
Y The main points in brief
feirbnstiopnmaeTh
1
@
Load the laundry and close
the door.
--------
2
Switch the dryer on.
@
Press the Start button A.
--------
3
20
Select a programme, and
adjust the programme
presettings as needed.
@
Dry.
@
Switch the dryer off.
--------
@
Remove the laundry.
@
Empty the condensation
container.
Clean the fluff filter.
Getting to know your appliance
en
* Getting to know your appliance
Dryer
ecnailpruoywnktgniGte
#
+
3
(
0
8
@
H
P
Condensate container
Control and display panel
Drum interior light (depending on the model)
Dryer door
Air inlet
Fluff filter
21
en
Getting to know your appliance
Control panel
Note: All buttons are sensitive and only need to be touched briefly.
#
+
( Programmes ~ Page 25.
0 Programme selector and On/Off
button.
8 Display panel with buttons
~ Page 22.
@ Start button for starting, pausing
or cancelling the programme.
H Buttons ~ Page 27.
Buttons
#
K
(
0
8
@
H
Dryness level
Anti-Crease
Ready in
Options
Start or Pause
C
P
X
`
h
;
3
Press for 3 seconds to
access settings
Selection buttons/
childproof lock
Remote start
Memory
For a detailed description of all buttons, see ~ Page 27 onwards.
22
+
Getting to know your appliance
en
Display panel
Indicators/symbols
Description
1 h 40 or 3 h
Expected programme length in hours and minutes, or programme delay in hours after selecting the "Ready in" time.
120 min
Length of the Anti-Crease cycle or programme length for timed
programmes.
Heat exchanger is being rinsed
The heat exchanger is cleaned automatically.
Please empty condensate container Empty the condensation container; ~ Page 32.
Please clean lint filter
Clean the fluff filter; ~ Page 31.
D
Childproof lock activated; ~ Page 27.
Drying
Iron dry ö
C/board dry »
C/board dry+ Ò
Finished/AntiCrease
Finished, remove washing
Programme progress
}
Remote start selected; ~ Page 27.
|
Off: Wi-Fi is switched off and the appliance is not connected to
your home network.
Flashing: The appliance is trying to connect to your home network.
Continuously lit: Wi-Fi is switched on and the appliance is connected to your home network.
¢
Wi-Fi is switched on but a connection to your home network cannot be established.
23
en
Laundry
– Clean the moisture sensor
regularly ~ Page 40.
Z Laundry
Preparing the laundry
yrdnuaL
: Warning
Risk of explosion/fire!
Remove any cigarette lighters and
matches from pockets.
Caution!
The dryer drum and fabrics could be
damaged.
Remove all objects from pockets and
observe the following information:
■
Tie cloth belts, apron strings, etc.
together or use a laundry bag.
■
Close zips, hooks and eyelets and
buttons. Button up large items of
laundry, such as covers.
■
Remove any metal objects, such as
paper clips, from pockets.
■
To ensure a consistent drying result,
sort laundry by fabric type and
drying programme.
■
Always dry very small items of
laundry, e.g. babies' socks, together
with large items such as towels.
■
Knitted fabrics such as T-shirts and
jerseys often shrink the first time they
are tumble-dried. Use a gentle
programme.
■
Do not overdry easy-care laundry.
This increases creasing of the
laundry.
■
Use timed programmes for single
garments.
■
Some detergents and care products,
e.g. starch or softeners, contain
particles which may be deposited on
the moisture sensor. This may impair
the sensor function and in
consequence the drying result.
Notes
– When washing laundry to be
tumble-dried, use the correct
amount of detergent and care
products as specified in the
manufacturer's instructions.
24
Sorting washing according to:
c
a
`
b
Suitable for tumble drying
Dry at normal temperature
Dry at low temperature
Do not tumble-dry
Note: Do not load laundry from the
washing machine directly into the
tumble dryer. Sort the spun laundry
before placing it in the dryer drum.
If you dry thin, thick and multi-layer
fabrics together, they will dry to differing
degrees. To achieve an even drying
result, you should therefore only dry
together laundry of the same type of
fabric and structure. If you feel that the
laundry is still too damp, you can select
a timed programme for subsequent
drying ~ Page 25.
Caution!
Possibility of material damage to the
dryer or laundry.
Do not tumble-dry the following
fabrics:
■
Laundry contaminated with oil.
■
Unwashed fabrics.
■
Non-breathable fabrics (e.g. rubbercoated).
■
Easily damaged fabrics such as silk,
synthetic curtains.
Programmes and buttons
en
/ Programmes and buttons
Programmes
snotubdnamrgsoeP
Programme and fabrics
Maximum load and programme
settings/info
Name of the programme
Which fabrics is the programme suitable for?
The maximum load is based on the
dry weight of the fabrics
Possible programme settings
Cottons
Hard-wearing fabrics, heat-resistant fabrics made of cotton or linen.
9 kg
Easy-Care
Synthetic or blended fabrics.
3.5 kg
Mixed Load
Mixed load consisting of cotton and synthetic fabrics.
3 kg
Delicates
2 kg
For delicate, washable textiles, e.g. made of satin, synthetic fibres or
blended fabrics.
Wool in Basket
1.5 kg
Fabrics made from wool or a wool blend that are suitable for tumble
drying.
Note: Only dry the fabrics using the basket for woollens .
Timed Progr. Cold
Time programme for all types of fabric except for wool and silk.
All types of fabric. For freshening up or airing items of laundry that
have not been worn frequently.
3 kg
Time Progr. Warm
All types of fabric; time programme.
Suitable for pre-dried or slightly damp laundry and for drying off
multi-layered, thick laundry.
3 kg
Shirts
Non-iron shirts or blouses made of cotton, linen, synthetic fibres
or blended fabrics.
1.5 kg
Duvet
Fabrics, pillows, quilts or bedspreads filled with synthetic fibres.
Dry large items individually. Observe the care label.
2.5 kg
Down Wear
Fabrics, pillows, bedspreads or eiderdowns filled with down.
Dry large items individually.
1.5 kg
You can adjust the programme
length using the button for
the "Ready in" time.
You can adjust the programme
length using the button for
the "Ready in" time.
25
en
Programmes and buttons
Sportswear
Weatherproof and outdoor clothing with a membrane coating
and water-repellent fabrics.
1.5 kg
Towels
Hard-wearing towels made of cotton.
6 kg
SuperQuick 40’
Synthetics and light cottons.
2 kg
Allergy+
Hard-wearing fabrics.
Note: Particularly suitable for the highest hygiene requirements.
4 kg
--------
26
Programmes and buttons
en
Buttons
Buttons
Explanations and notes
Note: Not all buttons and their functions can be selected in all programmes.
Select the setting you require from the list on the display panel.
Drying level:
Select the dryness level (e.g. Cupboard Dry) or the drying time (20 mins up to 3 hrs
30 mins, depending on the model and programme).
Select the dryness level according to the laundry to be dried.
If you have selected a dryness level, this is stored for all programmes, except for Cottons, even after the dryer has been switched off.
C/board dry+ Ò
Multi-layered, thick laundry that does not dry readily.
C/board dry »
Normal, single-layered laundry.
Iron dry ö
Normal, single-layered laundry that still needs to be damp after drying and is suitable
for ironing or hanging up.
Crease Guard
The drum moves the laundry at regular intervals for 60 or 120 minutes after drying,
in any programme, to prevent creasing.
Finished in
The programme will end in 1-24 hrs. Set the "Ready in" time in increments of one
hour to delay the start of the programme. The required number of hours after the
programme ends is displayed in the display panel.
Childproof lock
You can activate or deactivate the childproof lock by pressing the two selection buttons × Ö on the left at the same time and holding them for 5 seconds. You cannot
activate the childproof lock before you have started the programme.
Note: If you have activated the Remote start function and you then select the childproof lock, this will deactivate the Remote start function.
Menu:
Press the button and the menu will be displayed on the display panel.
Spin speed ø
For the spin class, set the spin speed at which the laundry has been spun in the
washing machine. This permits the expected drying time to be indicated more accurately. Speeds of between 600 and 1800 rpm can be selected. Default setting: 1000
rpm
Adjust dryness level ù
If your laundry is too damp after drying, you can fine tune the dryness levels, e.g. Cupboard Dry, using the drying degree button. The dryness level can be increased in
three stages, from +1 to +3 , by adjusting the drying degree.
Once you have adjusted the drying degree, this setting will be retained even after the
dryer has been switched off.
27
en
Programmes and buttons
Low Heat K
Low temperature for delicate fabrics, e.g. polyacrylic and elastane. May increase the
length of the programme.
Basic setting
3 sec.
Press the two selection buttons at the same time and hold them for 3 seconds. The
menu will be displayed on the display panel.
End signal or button signal
Select the programme end signal volume or the button signal volume. Signal: Off –
Quiet – Medium – Loud – Very loud.
Default setting: Loud
Autom. switch off
Time after which the dryer automatically switches off once the programme has
ended: Never, 15, 30 or 60 min. Default setting: 15 min
Note: If you have switched Wi-Fi on, the automatic switch-off is set to Never.
Language
Select the language you require on the display panel.
Remote Start }
Enables the appliance to be started remotely via the Home Connect app.
Remote start remains enabled for 24 hours after it has been activated. It will be
deactivated automatically if you do not start the programme via the
Home Connect app during this time. If you carry out any operations on the appliance
itself, such as opening the door or selecting a different programme, the remote start
button will be deactivated for safety reasons.
Notes
■
Remote start can only be activated if the appliance door is closed.
■
Remote start cannot be activated if the childproof lock is on.
Press and hold the button for more than 3 seconds to access the Home Connect settings ~ Page 35.
Memory 1/
Memory 2
You can save individual programme settings under Memory 1 and 2.
Select the required programme settings and press the 9 or : button for
3 seconds until the display panel shows Memory programme 1 or 2 saved.Your
selected programme settings will be retained even after the dryer has been switched
off.
Default setting: No Memory programme saved.
Note: If you have not saved a Memory programme, you will not be able to view it via
the Home Connect app.
Start/Pause A
Starts or pauses the programme.
--------
28
Operating the appliance
1 Operating
the appliance
Loading laundry and
switching on the dryer
ecnailpehtgniaOrep
Note: The dryer must be correctly
positioned and connected, ~ Page 13.
1. Place the laundry in the drum.
2. Press the # buttnon to switch
the dryer on.
3. Close the dryer door.
Caution!
Possibility of material damage to
the dryer or laundry.
Take care not to trap any laundry in
the door.
Note: The dryer drum is lit up after the
door is opened and closed and once
the programme has started. The drum
interior light goes out on its own.
en
Setting a programme
Note: If you have activated the
childproof lock, you must deactivate it
before you can set a programme, see
~ Page 27.
1. Select the required programme;
detailed information on the
programmes can be found from
~ Page 25 onwards.
2. Use the programme selector to set
the required programme. The default
programme settings for the selected
programme appear in the display
panel.
Note: Default programme settings
are standard settings that are
already defined when a programme
is selected. After selecting a
programme, you can see the default
programme settings in the display
panel.
3. If required, adjust the default
programme settings. You can find
detailed information on this from
~ Page 25 onwards.
Starting the programme
Press the Start button.
Note: If you want to lock the
programme to prevent it from being
adjusted inadvertently, you can select
the childproof lock, see ~ Page 27.
29
en
Operating the appliance
Programme sequence
Cancelling the programme
The programme status is displayed in
the display field.
The programme can be interrupted at
any time; to pause, open the dryer door
or press the Start button.
Changing the programme or
adding laundry
You can remove or add laundry and
change or alter the programme at any
time during drying.
1. To pause the programme, open the
dryer door or press the Start button.
2. Add or remove laundry.
3. Select another programme or an
additional function, if required.
4. Close the dryer door.
5. Press the Start button.
Note: The programme duration in the
display panel is updated depending on
the load and residual moisture in the
laundry. The values displayed may
change after the programme is
changed or the load is adapted.
30
Caution!
Risk of fire. Laundry may catch fire.
If you cancel the programme, you must
remove the laundry items and spread
them out so that the heat can disperse.
Programme end
Finished, remove washing appears in
the display panel.
Removing laundry and
switching off the dryer
1. Remove the laundry.
2. Press the # button to switch the
dryer off.
Operating the appliance
Clean the fluff filter
Note: During drying, fluff and hair from
the laundry is trapped by the fluff filter. If
the fluff filter is blocked or dirty, this
reduces the flow of air, which prevents
the dryer from achieving its maximum
performance. Clean fluff filters also
reduce energy consumption and the
drying time.
Clean the fluff filter after each drying
cycle:
en
5. Open both filters and remove all the
fluff.
6. Rinse away the fluff under warm,
running water.
1. Open the dryer door and remove all
fluff from the door.
2. Pull out the two-part fluff filter.
7. Dry the fluff filter, close it and reinsert
the two-part fluff filter.
3. Remove the fluff from the recess in
the fluff filter.
Note: Ensure that no fluff falls into
the open shaft.
4. Pull apart the two-part fluff filter.
Caution!
The dryer may be damaged.
Do not operate the dryer without a fluff
filter or if the fluff filter is defective.
31
en
Operating the appliance
Emptying the condensate
container
2. Pour out the condensation water.
Notes
■
You can drain off the condensation
into the waste-water system using an
optional condensation drain*. For
installation, see ~ Page 14.
■
If you drain the condensation using
an optional condensation drain, you
do not have to empty
the condensate container.
Note: After each drying cycle, empty
the condensate container; otherwise
the next drying programme may be
cancelled as a result of the condensate
container being full.
1. Pull out the condensate container
horizontally.
Caution!
Dirty condensation water may be
harmful to your health and cause
material damage.
Condensation water is not suitable
for drinking and may be
contaminated with fluff. Do not drink
the condensation water or reuse it.
3. Push in the condensate container
until you feel it lock back into place
in the dryer.
Note: The filter in the condensate
container filters the condensation which
is used during the dryer's automatic
cleaning cycle. The filter is cleaned by
emptying the condensation.
Nevertheless, you should check the
filter regularly for remaining deposits
and remove them. See ~ Page 41.
*
32
Depending on the model
Home Connect
en
o Home Connect
Connecting to your home
network automatically
This appliance is Wi-Fi enabled and can
be controlled remotely via a smartphone
or tablet PC.
With the Home Connect app, you can
use your smartphone or tablet PC to do
the following on this appliance:
If your router has a WPS function, you
can connect the appliance to your home
network automatically.
If your router does not have a WPS
function, you will need to connect the
appliance to your home network
manually ~ Page 34.
Wi-Fi must be switched on at the
appliance.
tceCnHom
■
■
■
■
■
Select and start programmes.
Change programme settings.
Query the status of programmes.
Change appliance settings.
Switch off the appliance.
Before you can use the Home Connect
functions, you will need to install the
Home Connect app on your
smartphone or tablet PC, register,
connect your appliance automatically or
manually to your home Wi-Fi network
(you only need to do this the first time)
and then connect your mobile device to
your appliance via the
Home Connect app.
You can find information about the app
on our Home Connect website
www.home-connect.com.
Notes
Please observe the safety
precautions in this instruction
manual and make sure that these
are complied with even when
operating the appliance via the
Home Connect app while you are
away from home. You must also
follow the instructions in the
Home Connect app.
■
You cannot use the
Home Connect app to make
changes while the appliance is in
operation. You will be able to use the
Home Connect app to see any
adjustments made directly on the
appliance itself, however.
■
1. Switch the appliance on.
2. Press and hold the Remote Start }
button for more than three seconds.
Aut. network log-in appears in the
display panel.
3. Use either of the right-hand arrow
buttons to select Connect.
1RWFRQQHFWHG
$XWQHWZRUNORJLQ
&RQQHFW
0DQQHWZRUNORJLQ
The appliance will now try to connect
to your home network.
33
en
Home Connect
4. Activate the WPS function on your
home network router within the next
two minutes.
If the appliance has successfully
connected to the home network,
Connected è appears in the display
panel.
5. You can exit the Home Connect
settings by selecting the Remote
Start } button.
Note: If you were not able to establish
a connection, check whether your
appliance is within range of the home
network and repeat the manual
connection. Try connecting
automatically again or connect your
appliance manually ~ Page 34.
Connecting to your home
network manually
If you have already automatically
connected your appliance to your home
network, you can skip the manual
connection step and connect it to the
Home Connect app ~ Page 35.
If your router does not have a
WPS function, you will need to connect
the appliance to your home network
manually.
Wi-Fi must be switched on at the
appliance.
1. Switch the appliance on.
2. Press and hold the Remote Start}
button for more than three seconds.
Aut. network log-in appears in the
display panel.
34
3. Use either of the left-hand arrow
buttons to select Man. network login.
$XWQHWZRUNORJLQ
&RQQHFW
0DQQHWZRUNORJLQ
1RWFRQQHFWHG
&RQQHFWWRWKHDSS
4. Use either of the right-hand arrow
buttons to select Connect.
$XWQHWZRUNORJLQ
1RWFRQQHFWHG
0DQQHWZRUNORJLQ
&RQQHFW
&RQQHFWWRWKHDSS
The appliance will now set up its
own Wi-Fi network with the name
(SSID) HomeConnect, which you
can access from your smartphone or
tablet PC.
5. Call up the Wi-Fi settings on your
smartphone or tablet PC.
6. Connect your smartphone or
tablet PC to the HomeConnect WiFi network and enter the Wi-Fi
password (key) "HomeConnect".
Note: The connection process may
take up to 60 seconds.
7. Once you have connected
successfully, open the
Home Connect app on your
smartphone or tablet PC.
Home Connect
8. In the Home Connect app, enter the
name (SSID) and password (key) for
your home network and then select
Transfer to appliance.
If the appliance has successfully
connected to the home network,
Connected è appears in the display
panel.
9. You can exit the Home Connect
settings by selecting the Remote
Start} button.
Notes
■
If you were not able to establish a
connection, check whether your
appliance is within range of the
home network and repeat the
manual connection.
■
If your smartphone or tablet PC is
still connected to the HomeConnect
network, you will need to connect it
to your home network first.
Connecting to the Home
Connect app
en
4. Use either of the left-hand arrow
buttons to select Connect to the
app.
0DQQHWZRUNORJLQ
&RQQHFWDSS
&RQQHFWWRWKHDSS
1RWFRQQHFWHG
:L)LRQRII
5. Use either of the right-hand arrow
buttons to select Connect app.
The appliance will now connect to
your Home Connect app.
0DQQHWZRUNORJLQ
1RWFRQQHFWHG
&RQQHFWWRWKHDSS
&RQQHFWDSS
:L)LRQRII
If your appliance is connected to your
home network, you can connect it to the
Home Connect app.
1. Switch the appliance on.
2. Wait until the | symbol appears in
the display panel.
3. Press and hold the Remote Start}
button for more than three seconds.
Aut. network log-in appears in the
display panel.
6. Open the Home Connect app on
your smartphone or tablet PC and
select Connect to add your new
appliance.
Note: If your smartphone or
tablet PC is still connected to the
HomeConnect network, you will
need to connect it to your home
network first.
7. If your appliance is not shown
automatically, select Appliance
search and then Connect an
appliance in the
Home Connect app.
8. Carry out the last steps in the
Home Connect app to connect your
appliance.
35
en
Home Connect
9. Use the right-hand arrow button to
select Continue on the appliance.
If the appliance has connected
successfully, App(s) connect. will
appear in the display panel.
10. You can exit the Home Connect
settings by selecting the Remote
Start } button.
Note: If you were not able to establish
a connection, check whether your
smartphone or tablet PC is within range
of your home network or is connected
to this. Try connecting to the
Home Connect app again.
Switching Wi-Fi on and off
You can switch the Home Connect
function on your appliance on or off
permanently at any time.
1. Switch the appliance on.
2. Press and hold the Remote Start }
button for more than three seconds.
Aut. network log-in appears in the
display panel.
3. Use either of the left-hand arrow
buttons to select Wi-Fi on/off.
&RQQHFWWRDSS
&RQQHFWWRDSS
:L)LRQRII
2Q
1HWZRUNVHWWLQJV
0DLQPHQX
36
4. Use either of the right-hand arrow
buttons on or off to switch Wi-Fi on
or off.
&RQQHFWWRDSS
:L)LRQRII
2II
1HWZRUNVHWWLQJV
5. You can exit the Home Connect
settings by selecting the Remote
Start } button.
Notes
■
If Wi-Fi is switched off on your
appliance, you will no longer be able
to connect it to your home network
or to the app.
■
If you have switched Wi-Fi on, the
automatic switch-off is set to Never.
Resetting your network
settings
You can clear the network settings and
break the connection to your
smartphone or tablet PC by resetting
the network settings.
1. Switch the appliance on.
2. Press and hold the Remote Start }
button for more than three seconds.
Aut. network log-in appears in the
display panel.
Home Connect
3. Use either of the left-hand arrow
buttons to select Network settings.
:L)LRQRII
5HVHW
1HWZRUNVHWWLQJV
5HWDLQ
6RIWZDUHXSGDWH
4. Use either of the right-hand arrow
buttons to select Reset.
en
Updating the software
You can update the
Home Connect software on your
appliance. As soon as a new update is
available, a note appears in the display
panel for your appliance.
You can install the update directly via
the message on the display panel or via
the appliance settings.
1. Switch the appliance on.
2. Press and hold the Remote Start }
button for more than three seconds.
Aut. network log-in appears in the
display panel.
3. Use either of the left-hand arrow
buttons to select Software update.
:L)LRQRII
1HWZRUNVHWWLQJV
5HVHW
6RIWZDUHXSGDWH
5HWDLQ
5. Use either of the right-hand arrow
buttons to select Continue.
The network settings are now reset.
Your appliance is no longer connected
to your home network or the
Home Connect app.
6. You can exit the Home Connect
settings by selecting the Remote
Start } button.
Note: If you want to operate the
appliance via the Home Connect app
again, you must reconnect it to your
home network and to the
Home Connect app either automatically
or manually.
1HWZRUNVHWWLQJV
,QVWDOOQRZ
6RIWZDUHXSGDWH
$YDLODEOH
4. Use either of the right-hand arrow
buttons to select Install now.
1HWZRUNVHWWLQJV
6RIWZDUHXSGDWH
,QVWDOOQRZ
$YDLODEOH
Update installation will now start. This
process may take several minutes. Do
not switch the appliance off while
updates are being installed.
37
en
Home Connect
5. You can exit the Home Connect
settings by selecting the Remote
Start } button.
Note: If no software update is available,
Not available appears in the display
panel. The Home Connect software is
completely up-to-date.
About data protection
When your appliance is connected for
the first time to a WLAN network, which
is connected to the Internet, your
appliance transmits the following
categories of data to the Home Connect
server (initial registration):
■
■
■
■
Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
installed WiFi communication
module).
Security certificate of the WiFi
communication module (to ensure a
secure IT connection).
The current software and hardware
version of your domestic appliance.
Status of any previous resetting to
factory settings.
This initial registration prepares the
Home Connect functions for use and is
only required when you want to use
these Home Connect functions for the
first time.
Note: Ensure that the Home Connect
functions can be used only in
conjunction with the Home Connect
app. Information on data protection can
be accessed in the Home Connect app.
38
Declaration of Conformity
BSH Hausgeräte GmbH hereby
declares that the appliance with
Home Connect functionality meets the
basic requirements and other relevant
provisions of the Directive 1999/5/EC.
A detailed R&TTE Declaration of
Conformity can be found online at
www.bosch-home.com among the
additional documents on the product
page for your appliance.
Noises
> Noises
Note: During drying, particularly in the
initial phase, operation of the appliance
results in noise from the compressor
and pump. This is perfectly normal and
does not impair proper functioning of
the appliance.
en
The condensation is pumped into
the condensate container by a pump.
This generates pumping noises.
seNio
From time to time, the compressor in
the dryer generates a humming noise.
However, the volume may vary
depending on the programme and
progress of the drying process.
Every now and then, the compressor is
ventilated. This creates a whirring noise.
The automatic cleaning of the dryer
causes a clicking sound.
39
en
Cleaning
D Cleaning
Cleaning the dryer and the
control panel
gniaeCl
: Warning
Risk of death!
There is a risk of electric shock as the
dryer is operated with electricity.
Disconnect the dryer from the mains
before cleaning.
Clean the dryer using only water and a
soft, damp cloth.
Remove all detergent residue, spray
residue or other residues immediately.
Do not use cleaning agents or agents
for pre-treating laundry (e.g. prewash
sprays, stain removers). Do not use
high-pressure cleaners or steam jet
cleaners to clean your appliance.
Cleaning the moisture sensor
Note: The dryer is equipped with a
stainless-steel moisture sensor. The
moisture sensor measures how damp
the laundry is.
After long periods of usage the moisture
sensor may become covered by a fine
layer of limescale or residues of
detergents and care products. Such
residues must be removed regularly as
the sensor function and in consequence
the drying result may be impaired.
Open the door and clean the moisture
sensor with a coarse sponge.
Caution!
Moisture sensor may be damaged.
Do not clean moisture sensors with
abrasives and steel wool.
40
Cleaning
Cleaning the filter
in the condensate container
en
4. Clean the filter under warm, running
water or in the dishwasher.
Note: The filter in the condensate
container cleans the condensation
water that is used during the dryer's
automatic cleaning cycle.
1. Pull out the condensate container
horizontally.
2. Pour out the condensation water.
3. Remove the filter.
5. Push in the filter until you feel it lock
into place.
Caution!
The dryer may be contaminated
with fluff and thus become
damaged.
Only operate the dryer with the filter
inserted.
6. Push in the condensate container
until you feel it lock into place.
41
en
Faults and what to do about them
3 Faults and what to do about them
meht uobadt wahdnstluFa
Faults
Please empty condensate container on the
display panel and drying
has stopped.
Please clean lint filter
on the display panel.
Cause/remedy
■
■
Empty the condensation container; ~ Page 19 and the dryer; .
If the optional condensation drain* has been installed, the drain hose may
be blocked or kinked. Check the hose for deposits and flush the hose
through. Lay the hose without any kinks.
Clean the fluff filter and press the Start button ~ Page 31.
Heat exchanger is
Not a fault. The heat exchanger is cleaned automatically. Do not pull out
being rinsed on the dis- the condensation container while this is displayed.
play panel.
Dryer will not start.
■
■
■
■
■
Mains plug plugged in or fuse/circuit breaker checked?
Programme selected?Select a programme.
Dryer door open? Close the door.
Is the childproof lock activated? Deactivate the childproof lock.
"Ready in" time selected? Programme starts after a delay ~ Page 27.
¢ on the display panel. Wi-Fi is switched on but a connection to your home network cannot be established.Check whether your home network is available or try to connect to your
home network again.
Home Connect is not
working.
You can find solutions to problems with Home Connect at www.home-connect.com
Creasing.
■
■
Water is leaking out.
Creasing occurs when you have exceeded the maximum load or selected
the wrong programme for the type of fabric. All the required information
can be found in the programme table ~ Page 25.
Remove clothes immediately after drying; creasing will occur if they are left
in the drum.
Not a fault; the dryer may be positioned on an incline. Level the dryer.
Programme duration dis- Not a fault. The moisture sensors detect the remaining moisture in the load
played changes during and adjust the programme length accordingly (except timed programmes).
drying.
* Depending on the model
42
Faults and what to do about them
en
Faults
Cause/remedy
Laundry is not dried
properly or is still too
damp.
After the programme has ended, warm laundry feels damper than it actually is. Spread the laundry out and allow the heat to disperse.
■
Fine tune the dryness level – this extends the drying time but does not
increase the temperature. Your laundry will become drier ~ Page 27.
■
Select a programme with a longer drying time or increase the dryness level.
This does not increase the temperature.
■
Select a timed programme to add extra drying time for laundry that is still
damp ~ Page 25.
■
If you have exceeded the maximum load for the programme, the laundry
may not be dried properly.
■
Clean the moisture sensor in the drum. The sensor may become covered in
a fine layer of limescale or detergent and care product residue, which then
impairs its performance. This prevents your laundry from being dried properly ~ Page 40.
■
Drying has stopped as a result of a power cut, because the condensation
container is full or because the maximum drying time has been exceeded.
Note: See also the laundry tips ~ Page 24.
Drying time too long?
■
■
■
■
■
The fluff filter may be clogged, which will make the drying time longer.
Clean the fluff filter.
If the air inlet on the dryer is blocked or not freely accessible, this may
increase the drying time. Make sure that the air inlet remains unobstructed.
The optimum ambient temperature for drying is between 15 °C and 30 °C.
Outside of this range, the drying time may increase.
Insufficient air circulation in the room may increase the drying time. Ventilate the room.
Display panel goes out Not a fault. Energy-saving mode is active ~ Page 12.
and Start button flashes.
Residual water in
Not a fault. If the condensation drain is installed, residual water remains in the
the condensation concondensation container due to the dryer's self-cleaning function.
tainer despite the dryer
being connected to
the condensation drain*.
Humidity in the room is
increasing.
Not a fault. Make sure the room is adequately ventilated.
Power cut.
The drying programme is stopped. Remove the laundry and spread it out or
restart the programme.
Unusual noises when
drying.
Not a fault. Noises are produced by the automatic cleaning of the heat
exchanger ~ Page 39.
The dryer feels cold
despite drying.
Not a fault. The dryer can dry effectively at low temperatures using a heat pump.
* Depending on the model
Note: If you cannot rectify the fault yourself by turning the dryer off and then on
again, please contact our after-sales service.
43
en
Consumption values
[ Consumption values
Consumption values table
seulavnoimuCstp
Programme
Spin speed which is
used for spinning
the laundry
Cottons
Cupboard Dry*
Iron Dry*
Duration**
Energy consumption**
9 kg
4.5 kg
9 kg
4.5 kg
1400 rpm
133 min
82 min
1.72 kWh
0.98 kWh
1000 rpm
157 min
97 min
2.13 kWh
1.21 kWh
800 rpm
181 min
112 min
2.48 kWh
1.41 kWh
1400 rpm
98 min
61 min
1.22 kWh
0.69 kWh
1000 rpm
123 min
76 min
1.62 kWh
0.92 kWh
800 rpm
147 min
91 min
2.00 kWh
1.14 kWh
Easy-Care
Cupboard Dry*
3.5 kg
3.5 kg
800 rpm
46 min
0,52 kWh
600 rpm
60 min
0.66 kWh
For testing in accordance with applicable standard EN61121 the dryer shall be used with external
drain set.
* Programme setting for testing in accordance with the applicable EN 61121 standard.
** The values may differ from those specified, depending on the type of fabric, composition of laundry to
be dried, residual moisture in the fabric, the degree of dryness that has been set, the amount of laundry
being loaded and the environmental conditions.
Most efficient programme for cotton fabrics
The following "standard cottons programme" (identified with ü) is suitable for
drying normal, wet cotton laundry and is most efficient in terms of its combined
energy consumption for drying wet cotton laundry.
Standard programme for cottons in accordance with current EU regulation 932/2012
Programme + Drying level
Load
Energy consumption
Programme duration
ü Cottons + Cupboard Dry
9 kg/4.5 kg
2.13 kWh/1.21 kWh
157 min/97 min
Programme setting for testing and energy labelling in accordance with Directive 2010/30/EU
44
Technical data
en
J Technical data
Dimensions:
85 x 60 x 60cm
Height x width x depth
Weight:
Approx. 57kg
Maximum load:
9 kg
Condensation container:
4,6 l
Mains voltage:
220 - 240 V
Connected load:
Max. 1000 W
Fuse:
10 A
atdlcinhTe
Drum interior light*
Ambient temperature:
5 - 35 °C
Power consumption when switched
off:
0,10 W
Power consumption when left on:
0,10 W
Power consumption when networked
(Wi-Fi) in standby mode/duration:
2,5 W / 15 mins
*
depending on the model
45
en
After-sales service
J After-sales service
After-sales service
If you cannot rectify the fault yourself
(faults, what to do?), please contact our
after-sales service. We will always find
an appropriate solution to avoid
unnecessary visits by engineers.
The contact information for your nearest
after-sales service can be found here or
in the enclosed after-sales service
directory.
Please provide after-sales service with
the dryer's product number (E-no.) and
production number (FD).
ecivrsela-rtAf
(1U
)'
You can find this information on the
inside of the dryer door or on the rear of
the dryer.
Trust the expertise of the
manufacturer.
Contact us. You can therefore be sure
that the repair is carried out by trained
service technicians who carry original
spare parts.
46
6
7
Advice and repair order in the event of faults
GB
IE
0344 892 8979 (Calls charged at local or mobile rate.)
01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.)
You can find the contact information for all countries in the attached after-sales
service directory.
Robert Bosch Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München, GERMANY
*9001176378*
9001176378 (9603)
Download PDF

advertising