Panasonic | DVDS24 | Operating instructions | Panasonic DVDS24 Operating Instructions

Panasonic DVDS24 Operating Instructions
DVD/CD PLAYER
Contents
DVD-S27/S24
Included Accessories
Inserting Batteries
Safety Precautions
Front DVD-Player
Connectors
Remote control unit
Operating Instructions
QUICK SETUP
Panasonic
DVD / CD PLAYER DVD-S27
DVD
CD
DVD-RAM VIDEO PLAYBACK
54MNz/10bit VIDEO D/A CONVERTER
OPEN/CLOSE
AV ENHANCER
Page
2
2-3
4
5
6-7
8
Playback functions
9 - 11
Navigation Menu
HighMAT / CD Text
12 - 13
14
DISPLAY menu
15 - 17
SETUP menus
Before requesting service
Information
Specifications
Index
Country-codes
18 - 19
20 - 21
22
23
last page
Before connecting the device, operating it or adjusting settings please read these
operating instructions completely; especially the safety precautions on pages 2-3.
Dear customer
WARNING:
Thank you for your trust and your decision to purchase this top-quality device. Panasonic is
one of the leading manufacturers of entertainment electronics devices. We are sure that you
will be completely satisfied with this device.
Matsushita Electric Industrial Co., Ltd.
http://www.panasonic.co.jp/global/
Included
A
AV ENHANCER FL SELECT OPEN/CLOSE
ADVANCED
SURROUND PICTURE MODE REPEAT
1
2
3
4
5
6
7
8
9
PLAY SPEED
POSITION MEMORY
CANCEL
QUICK REPLAY
0
10
SKIP
STOP
SLW
O /SEARCH
PAUSE
DIRECT NAVIGATOR
PLAY
AC Mains Lead
RJA0043-1C
Batteries
AA, UM3 or R6
MENU
ENTER
DISPLAY
RETURN
SUBTITLE AUDIO ANGLE/PAGE SETUP
SLEEP
ZOOM
Audio/Video Cable
K2KA6CA00001
GROUP
DVD PLAYER
Operating Instructions
Guarantee Card
N2QAJB0000 91
Remote control N2QAJB00091
Inserting Batteries
The batteries last for about a year, depending on how often you use
the remote control unit.
! Do not mix old with new batteries or batteries of different types.
! Only use batteries without any harmful substances (lead, cadmium, mercury).
! Do not use rechargeable type batteries.
! Remove the batteries if the remote control unit will remain unused
for longer periods of time.
! Do not heat or short-circuit the batteries. Immediately remove
used-up batteries and replace with batteries of type AA, UM3 or R6.
! Be sure to put in the batteries the right way round (+ and -).
Dispose of batteries, packaging material and the unit according to
statutory regulations. They must not be thrown into the household refuse.
2
CAUTION!
! DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN
CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS
WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE
HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY
OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
! DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS WITH
NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.
! DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED
CANDLES, ON THE UNIT.
! DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY
MANNER.
PLAL
Y IST
TOP MENU
PLAY MODE
ccessories
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE,
DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR
SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS
VASES, SHALL BE PLACED ON THE APPARATUS.
CAUTION!
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.
This product may receive radio interference caused by mobile telephones
during use. If such interference is apparent, please increase separation
between the product and the mobile telephone.
The socket outlet shall be installed near the equipment and easily accessible or
the mains plug or an appliance coupler shall remain readily operable.
Voltage: Only use power sources complying with the specifications for
this device.
AC mains lead protection: Ensure the AC mains lead is connected
correctly and not damaged. Poor connection and lead damage can
cause fire or electric shock.
Service: Never attempt to repair this unit by yourself. If a problem
occurs that is not described in these operating instructions,
disconnect the power supply and contact your dealer or an authorised
after sales service centre.
Safety Precautions
Install this device in a horizontal position.
Do not place anything heavy on it.
Keep this device away from high
temperatures and avoid changes
in temperatures.
VAROITUS:
TULIPALO-, SÄHKÖISKUVAARAN TAI TUOTETTA
KOHTAAVAN MUUN VAHINGON VÄHENTÄMISEKSI EI
LAITETTA SAA ALTISTAA SATEELLE, KOSTEUDELLE,
VESIPISAROILLE TAI ROISKEELLE, EIKÄ NESTETTÄ
SISÄLTÄVIÄ ESINEITÄ, KUTEN ESIMERKIKSI
MALJAKOITA, SAA ASETTAA LAITTEEN PÄÄLLE.
VAROITUS!
Keep away from humidity and dust.
Inside of product
Produktets innside
(Norsk)
Tuotteen sisällä
(Suomi)
! ÄLÄ ASENNA TAI LAITA TÄTÄ LAITETTA
KABINETTITYYPPISEEN KIRJAKAAPPIIN TAI
MUUHUN SULJETTUUN TILAAN, JOTTA
TUULETUS ONNISTUISI. VARMISTA, ETTÄ VERHO
TAI MIKÄÄN MUU MATERIAALI EI HUONONNA
TUULETUSTA, JOTTA VÄLTETTÄISIIN
YLIKUUMENEMISESTA JOHTUVA SÄHKÖISKU TAI
TULIPALOVAARA.
! ÄLÄ PEITÄ LAITTEEN TUULETUSAUKKOJA
SANOMALEHDELLÄ, PÖYTÄLIINALLA, VERHOLLA TAI
MUULLA VASTAAVALLA ESINEELLÄ.
! ÄLÄ ASETA PALAVAA KYNTTILÄÄ TAI MUUTA
AVOTULEN LÄHDETTÄ LAITTEEN PÄÄLLE.
! HÄVITÄ PARISTOT LUONTOA
VAHINGOITTAMATTOMALLA TAVALLA.
VAROITUS!
LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ
KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA
ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1
YLITTÄVÄLLE NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE.
Back of product,
see page 5.
På baksiden
av produktet
(Norsk).
Laitteen takaosa
(Suomi).
TÄMÄ LAITE ON TARKOITETTU KÄYTETTÄVÄKSI
LEUDOSSA ILMASTOSSA.
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
The model and serial number of this product can be found on the
back of the unit. Please note them and keep for future reference
Model No.
Serial No.
NORSK
SUOMI
Tämä tuotteen toimintaan saattaa tulla häiriöitä lähellä
olevasta matkapuhelimesta. Mikäli matkapuhelimesta
johtuvia häiriöitä ilmenee, siirrä matkapuhelin
mahdollisimman kauas laitteesta jotta häiriöt poistuvat.
Laite tulee asettaa lähelle verkkopistorasiaa ja pistokkeen
täytyy olla sellaisessa asennossa, että siihen on helppo
tarttua ongelman sattuessa.
ADVARSEL:
FOR Å REDUSERE FAREN FOR BRANN, ELEKTRISK
STØT ELLER SKADER PÅ PRODUKTET, MÅ DETTE
APPARATET IKKE UTSETTES FOR REGN, FUKTIGHET,
VANNDRÅPER ELLER VANNSPRUT. DET MÅ HELLER
IKKE PLASSERES GJENSTANDER FYLT MED VANN, SLIK
SOM BLOMSTERVASER, OPPÅ APPARATET.
ADVARSEL!
! APPARATET MÅ IKKE PLASSERES I EN BOKHYLLE, ET
INNEBYGGET KABINETT ELLER ET ANNET LUKKET
STED HVOR VENTILASJONSFORHOLDENE ER
UTILSTREKKELIGE. SØRG FOR AT GARDINER ELLER
LIGNENDE IKKE FORVERRER
VENTILASJONSFORHOLDENE, SÅ RISIKO FOR
ELEKTRISK SJOKK ELLER BRANN FORÅRSAKET AV
OVERHETING UNNGÅS.
! APPARATETS VENTILASJONSÅPNINGER MÅ IKKE
DEKKES TIL MED AVISER, BORDDUKER, GARDINER
OG LIGNENDE.
! PLASSER IKKE ÅPEN ILD, SLIK SOM LEVENDE LYS,
OPPÅ APPARATET.
! BRUKTE BATTERIER MÅ KASSERES UTEN FARE FOR
MILJØET.
ADVARSEL!
DETTE PRODUKTET ANVENDER EN LASER. BETJENING
AV KONTROLLER, JUSTERINGER ELLER ANDRE
INNGREP ENN DE SOM ER BESKREVET I DENNE
BRUKSANVISNING, KAN FØRE TIL FARLIG BESTRÅLING.
DEKSLER MÅ IKKE ÅPNES, OG FORSØK ALDRI
Å REPARERE APPARATET PÅ EGENHÅND. ALT SERVICE
OG REPARASJONSARBEID MÅ UTFØRES AV
KVALIFISERT PERSONELL.
DETTE APPARATET ER BEREGNET TIL BRUK UNDER
MODERATE KLIMAFORHOLD.
Dette apparatet kan under bruk fange opp høyfrekvente
forstyrrelser forårsaket av en mobiltelefon som benyttes i
nærheten. Hvis slik forstyrrende påvirkning konstateres, bør
mobiltelefonen benyttes på større avstand fra dette apparatet.
Utstyret bør plasseres i nærheten av AC-stikkontakten, og
støpslet må være lett tilgjengelig hvis det skulle oppstå problemer.
3
Front DVD-Player
Panasonic
DVD / CD PLAYER DVD-S27
DVD-RAM VIDEO PLAYBACK
54MNz/10bit VIDEO D/A CONVERTER
AV ENHANCER
OPEN/CLOSE
DVD
CD
Detailed information
Page
is available on the
specified pages.
Stand-by indicator
When the unit is connected to the AC mains supply,
this indicator lights up in standby mode and goes out
when the unit is turned on.
OPEN/CLOSE
Stops playback.
7
Opens and closes the disc tray.
Pauses playback.
7
SKIP: Skips chapters, titles or frames.
Starts playback.
AV ENHANCER
Stand-by/on switch /I
Press to switch the unit from on to stand-by mode
or vice versa. In stand-by mode, the unit is still
consuming a small amount of power.
7
7
SLOW/SEARCH (keep button pressed)
Slow motion/search function.
AV-Enhancer: Automatically optimises and adapts the audio and video settings to the disc used. The
Picture and Audio menus are not available when this function is enabled.
Your DVD player provides a perfect digital DVD video output. Depending on the type of DVD, your hi-fi equipment or your
stereo TV set you can play back stereo sound or digital multi-channel sound in excellent cinema quality. DVD video also
features options for selecting the audio channel, the synchronised language, the language of subtitles and for choosing from
various camera pick-up angles.
All basic functions of your DVD player can be controlled either via the unit or by means of the remote control.
However, these operating instructions will make reference to the remote control symbols only.
The remote control lets you make any changes to the device settings which will be retained
when you switch off the player unit.
4
Connectors
Before connecting
! Verify that all devices to be connected up are unplugged from the AC mains.
Note on all connections shown
Attach the unit directly to the TV set. If you let the player connection go through a video recorder
You will experience a disturbed picture when playing copy-protected DVDs.
Connection to a TV set without a scart socket or to
an amplifier component (home cinema):
Connection to a TV set with scart socket:
When the unit is fully connected up
attach the AC mains cable.
21-pin scart cable
Red White Yellow
Rear of
DVD/CD player
AC IN ~
VIDEO OUT
AUDIO OUT
L
Please connect
directly to TV.
COAXIAL
R
DIGITAL AUDIO OUT
AV
(PCM/BITSTREAM)
Home cinema
Red
AUDIO OUT
White
VIDEO OUT
L
Please connect
directly to TV
COAXIAL
Rear of
DVD player
To be able to hear sound in stereo or Dolby Pro Logic quality, attach an amplifier or an analogue audio component
supporting these features.
! To avoid sound quality problems deactivate function Advanced Surround when you attach an amplifier with
Dolby Pro Logic functionality. Please refer to page 15.
Digital connectors (COAXIAL)
To play programmes with a 5.1-channel surround sound, connect the digital audio output (COAXIAL) with an
external "Multi-channel Dolby Digital amplifier" or similar appliance.
Prerequisites for making recordings with an external digital recorder
- The original disc must not be copy-protected.
- The recorder must be able to process signals with a scanning frequency of 48 kHz/16 bit.
- You cannot make MP3/WMA recordings.
D
R
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
D
Adapt the Audio SETUP menu settings (see page 19) to the following:
PCM Digital Output: [up to 48 kHz]
Dolby Digital / DTS Digital Surround / MPEG: [PCM]
Deactivate function Advanced Surround (see page 15).
5
Remote control unit
General control
Stand-by/on switch
Press to switch the unit from on to stand-by mode
or vice versa. In stand-by mode, the unit is still
consuming a small amount of power.
OPEN/CLOSE
Opens and closes the disc tray.
!
!
ENTER
!
PLAY SPEED
OSD menu selection buttons.
Select Groups ( ) or Titles (
) for JPEG,
WMA or MP3.
ENTER: accepts the menu function you selected
Playback speed control.
Adapts to a factor between x0.6 and x1.4.
AV ENHANCER FL SELECT OPEN/CLOSE
ADVANCED
SURROUND PICTURE MODE REPEAT
1
2
3
4
5
6
7
8
9
0
10
PLAY SPEED
POSITION MEMORY
FL SELECT
CANCEL
Selects the display contents.
(Title/Chapter or Time)
0...9
10
SLEEP
Discards entries.
Numeric key pad; input of two-digit numbers.
RETURN
AV Enhancer.
4
QUICK REPLAY
SKIP
Switches off the unit at the set time.
STOP
Menu control
AV ENHANCER
CANCEL
SLOW/SEARCH
PAUSE
DIRECT NAVIGATOR
Quits a menu.
PLAY LIST
TOP MENU
ADVANCED
SURROUND
PICTURE MODE
DIRECT NAVIGATOR
TOP MENU
15
Selects the picture mode.
17
Displays the DVD-RAM menu.
11
Displays the main menu.
SUBTITLE
AUDIO
ANGLE/PAGE
22
PLAY LIST
Displays a play list.
11
MENU
Displays the menu.
12 22
Displays the on-screen display.
15 17
DISPLAY
6
Produces an effect similar
to surround sound.
SETUP
Selects the language of subtitles.
16 22
Changes the audio track.
16
MENU
ENTER
DISPLAY
RETURN
SUBTITLE AUDIO ANGLE/PAGE SETUP
ANGLE: Selects a camera angle.
PAGE : Changes menu pages.
Rotates JPEG images.
13 16
Displays the SETUP menu.
8 18
PLAY MODE
SLEEP
ZOOM
DVD PLAYER
GROUP
Displays the DISPLAY menu
Group Search.
PLAY
N2QAJB000091
16
GROUP
Playback control
PLAY
STOP
Start playback
! Press PLAY .
Playback starts automatically.
Stop playback
! Press STOP
SKIP
9
SLOW/SEARCH
twice.
Resume
! Press STOP
during playback
to store the current position on the disc.
! Press PLAY
while [ ] is flashing on the display.
Playback is resumed at the point where you stopped it.
On-screen display
PAUSE
ZOOM
PLAY MODE
Opening the disc tray or the unit going into stand-by mode
also clears the stored position on the disc.
Pause playback (still image)
! Press PAUSE during playback.
Playback stops at the current picture frame.
! Press PLAY
to resume playback.
Random Playback/Program Play.
On-screen display
REPEAT
Zoom
! Press ZOOM during playback.
To fine-tune the zoom factor press
To set the zoom mode: ENTER and
.
Restore factory setting
! Press ZOOM until x1.00 is shown.
The zoom functionality may be restricted
depending on the disc format.
QUICK REPLAY
17
Slow motion (backwards/forwards)
! Press SLOW in Pause mode.
Keeping the button pressed increases the speed
of search at 5 steps.
! Press PLAY to resume normal playback.
D
Cancel the Resume function
! Press STOP until [ ] disappears from the display.
D
Skip chapters, titles or frames
! Press SKIP during playback or in Pause mode.
On-screen display
Search
! Press SEARCH during playback.
Keeping the button pressed increases the speed of
search at 5 steps.
Repeat
! Press REPEAT during playback.
There is no mode for repeatedly playing back
entire discs.
POSITION MEMORY
9
Scene replay
! Press QUICK REPLAY during playback.
Every push of the button replays a couple of seconds of
the current track or programme. However, you cannot go
back to before the beginning of a title.
D
10
VCDs do not support reverse slow motion playback.
QUICK REPLAY is not supported by all discs.
Resumes playback at stored
Position following an interruption.
10
7
QUICK SETUP
!
Setup
QUICK SETUP
Select the menu language.
English
Deutsch
Español
Svenska
to select and press ENTER
Français
Italiano
Português
Nederlands
RETURN to return
The navigator keys of the remote control unit allow you
to move between menus and to accept or change the
selected settings.
ENTER
Press ENTER to store a change.
Press RETURN to go back to the
previous screen.
Press SETUP to quit the menu.
!
!
!
!
!
D
Switch on the TV set and set it to the video input that matches
the connection between player and TV set.
Press the Stand-by/on button to switch on the DVD player.
Press SETUP to display the QUICK SETUP menu.
Use the navigator keys
to select a menu language,
then press ENTER to confirm.
To continue with setting the defaults, press
to select [Yes]
and ENTER to confirm. You can later go to the Setup menu to
run QUICK SETUP again.
Use the Setup menu options to adapt the default settings below
to your appliance. Every menu item provides further information
on the options you have.
Please refer to the operating instructions of your TV set to read
more about the best settings.
Select the type of TV you have connected.
Optimise the picture settings of the connected appliance.
Select your TV's aspect ratio.
The format of TV screens is either 4:3 (standard) or 16:9 (wide-screen).
Select the aspect ratio that matches the screen setting of your TV set.
Select the signal type output from the SCART terminal.
Before you proceed please check which setting is supported by your TV set.
To improve the picture quality, you can set the AV scart socket output to
a variety of video signals:
[Video] = standard picture quality
[S-Video] = enhanced picture quality
[RGB] = best picture quality
S-Video and RGB: Requires a 21-pin scart cable.
Following QUICK SETUP, you can use the options of the
Setup menu to make further settings.
Press RETURN or SETUP to quit the Setup menu.
8
19
18
Playback functions
Playback
! Press OPEN/CLOSE
to open
the disc tray.
! Place the disc on the disc tray.
! Press PLAY .
The disc tray closes and disc
playback starts automatically.
D The player may take some time
to read all of the disc information!
DVD-Video
Video CD
CD
RAM
MP3
WMA
JPEG
!
The label
must
face up.
MP3, WMA, JPEG:
The Playback menu appears on the screen.
Subtitles/information:
! Press SUBTITLE to show or hide the text.
12
D
22
Pause playback (still image)
! Press PAUSE during playback.
7
Interrupt playback
! Press STOP .
! Press PLAY to resume playback.
7
Stop playback
! Press STOP
twice.
Playback of a particular
track or title
Repeat
7
DVD-Video
Video CD
CD
RAM
MP3
WMA
JPEG
Type in a number using the RC unit's numeric key pad.
For example, to select title 23:
DVD/RAM/VCD/CD : Press + + .
MP3/WMA/JPEG : Press + + ENTER.
The unit automatically starts playing the selected track.
D Certain discs may not provide this function at all or only if the appliance
is in stop mode.
DVD-Video
Video CD
CD
RAM
MP3
WMA
JPEG
Press REPEAT during playback.
You can choose from the following settings, depending on the
disc you use:
DVD-Video
Off
Chapter
Title
DVD-RAM PG Off
Program
All
DVD-RAM PL Off
Scene
Playlist
VCD/CD
Off
Track
All
WMA/MP3
Off
Content
Group
JPEG
Off
Group
The repeat function is available only if the disc runtime is displayed during
playback. There is no mode for repeatedly playing back entire discs.
Repeating a VCD using playback control (PBC)
! Press STOP
during playback until [PLAY] is no longer
displayed.
! Type in the number of the CD track using the RC unit's
numeric key pad.
! Press REPEAT.
The display shows [TRK] or [ALL].
Single frame mode
DVD-Video
Video CD
RAM
In pause mode, press remote control buttons or .
Every push of one of these buttons takes the film a single frame
forwards or backwards.Keeping one of these buttons pressed
continuously displays the next single frame in the chosen
direction. You can also press PAUSE to move the film forward a
single frame at a time.
D
VCDs do not support a backward motion by single frames.
9
Playback functions
DVD-Video
Chapter review
This function lets you browse back through the chapters of a
DVD-V by playing the first couple of seconds of every chapter.
! Press STOP
during playback.
! Press PLAY .
A message appears: Press PLAY to Chapter Review.
! Press PLAY again.
The first couple of seconds of every chapter are played back.
Normal playback is resumed at the point where you stopped it.
D
Do not press PLAY if you do not wish to browse back through the
chapters. After a couple of seconds, normal playback will be automatically
resumed at the point where it was stopped.
DVD-Video
POSITION MEMORY
Video CD
CD
RAM
MP3
WMA
JPEG
Use the Position Memory function to resume disc playback at a
set position.
You can tag and directly access up to 5 discs.
The position tag is retained when you change discs or when the
unit goes into stand-by mode.
10
!
Press POSITION MEMORY during playback.
A message appears: Position memorized.
You can now change discs or go into stand-by mode.
!
Press PLAY to play back the disc again. Playback is
resumed at the stored position and the position tag is cleared.
D
Some discs do not fully support all of this function.
DVD-Video Video CD
Random playback
MP3
WMA
All chapters/tracks are played
once each in a random order.
! Press PLAY MODE while the disc is stopped.
The Program Play screen is displayed.
! Press PLAY MODE again.
The Random Playback screen is displayed
! Press PLAY to start random playback.
! To deactivate the function, stop the disc and press PLAY
MODE.
D DVD-V, MP3, WMA, JPEG: Press
or the numeric keys of the
remote control unit to select or specify the track/group to be played
in a random order.
DVD-Video
Automatic switch-off
CD
JPEG
Video CD
CD
RAM
MP3
WMA
JPEG
!
!
Press SLEEP to display that menu.
Select a switch-off timer option pressing
:
Off
AUTO
60 min
90 min
120 min
[SLP] appears on the display.
After the set time, the appliance goes into stand-by mode.
!
!
Choose [Off] to disable the function.
Choose [Auto] to have the appliance switch itself off 5 minutes
after the end of the available runtime.
[Auto] is not available if you press STOP, MENU or TOP MENU.
Press SLEEP to check the time remaining until switch-off.
!
D
If Auto Power Off is activated, the player automatically goes into
stand-by mode after approx. 30 minutes in Stop mode.
19
Playback functions
Program play
Time
Play
Clear
Clear all
--PLAY to start
to select and press ENTER
CD
MP3
WMA
JPEG
!
D
Choose a title and chapter.
Title Chapter
Video CD
You can programme up to 32 chapters/tracks to be played in any order.
Press PLAY MODE while the disc is stopped. The Program Play screen appears.
Use the numeric keys to specify the Group/Title (not with CDs) and the
Content/Chapter. In the case of MP3 or WMA discs or if you select the
numbers using
, press ENTER to confirm every entry.
! Repeat this procedure to make further entries.
! Press PLAY . The unit starts to play the programme.
D Some discs may not provide this function.
Program Play
No.
1
DVD-Video
!
!
!
To clear an entry, press
to select it first.
Press and to select [Clear], then press ENTER.
Choose [Clear all] and press ENTER to clear all entries.
!
!
To change an entry, press
to select it, then press ENTER to confirm.
Press ENTER to confirm any changes to the Group/Title and Content/Chapter objects.
To quit the Program Play mode
! Stop the disc and press PLAY MODE until Program Play disappears from the display.
The actual programme is retained.
D To clear the programme, switch off the appliance or remove the disc.
DVD-RAM Direct Navigator
Direct Navigator
!
No.
Date
On
Title
1
2
9/12 (THU)
9/12 (THU)
16:48
20:00
Friends
News
0 ~ 9 to select and press ENTER
Contents
!
RETURN
to exit
Your player can play DVD-RAM discs recorded in the
video recording format, version 1.1, by a DVD video
recorder, DVD video camera, computer etc.
RAM
Press DIRECT NAVIGATOR to enter or exit the menu screen.
Programme names are shown only if they were entered when the RAM was produced.
Press to display the programme information. Press
to browse.
Press RETURN to go back to the previous screen.
Press
or use the numeric keys to select a programme.
Playback starts in the background. Press ENTER to hide the menu screen.
To play tracks from a play list
You can play tracks contained in a play list recorded on a DVD video recorder,
for example.
! Press PLAY LIST. The Playlist screen is displayed if the disc has a play list on it.
Press PLAY LIST again to quit the menu.
! Press
or use the numeric keys to select a play list, then press ENTER to confirm.
Playback starts. Press SKIP to leave out tracks down a play list.
11
Navigation Menu
MP3
WMA
JPEG
Playback Menu
! The Playback Menu appears on the screen when you insert a
JPEG, WMA, MP3 or HighMAT disc.
! Press
to select the contents you wish to play, then press ENTER
or PLAY to confirm.
D To display the Navigation Menu when playing HighMAT discs, go to the Setup menu, pick item Others
and set HighMAT to [Enable] (see page 19).
Or select in STOP-Mode in the Other Menu [Play as Data Disc] (see page 17).
Playback Menu
All
Total 260
Audio
Total 0
Picture
Total 260
to select and press ENTER
To display the selection menu
! Display the Navigation Menu and press
DISPLAY. The Selection menu is displayed.
! Press
to select a menu item, then press
ENTER to confirm or RETURN to quit the
Selection menu.
Navigation Menu
MP3
Group 1
Group 2
Group 3
Group 4
Group 5
Group 001/011
to select and press ENTER
G 1
1
01
02
03
04
05
06
07
08
09
10
11
12
---
--:--
Multi
List
Tree
Next group
Previous group
All
Audio
Picture
Help display
Find
Thumbnail
Next group
Previous group
All / Audio / Picture
Moves to the next or previous group.
Help display
Displays help on the menu control or the status indicator.
Content 0001/0003
RETURN to return
Search with asterisk: The match list covers all
entries containing the word you specified.
Search without asterisk: To look for the first work
in a title press to delete the asterisk.
12
To display the Navigation Menu
MP3
WMA
JPEG
! Press MENU. The Navigation Menu is displayed.
! Press
to select a title, then press ENTER to start playing it.
! Press MENU to quit the menu.
Navigation Menu / Selection menu options
The [Group] and [Content] panels are tiled vertically. Press
to move
Multi
the cursor from [Group] to [Content] and back.
List
Shows the [Content] of the selected [Group].
Displays a tree view of the groups. Press
and ENTER to select a
Tree
[Group]. The Group's contents is shown.
Find
*A
Find
Displays the JPEG Thumbnail Menu.
13
Selects the formats shown on the Navigation Menu.
To find groups or content
! Press
to enter the target word into the text box.
Press ENTER to confirm every letter. Press to make corrections.
! Press to select [Find] and ENTER to confirm.
The match list contains the matching entries.
If there are no matching entries, you will see: [Not found].
! Press
and ENTER to start playing the track you looked for.
D In the [Multi] view press
to select the Group or Content panel. The
search is performed in the selected area.
Navigation Menu
G1
Thumbnail Menu
C 1 JPEG
--:--
P1000001
1/68
2
3
4
5
6
7
8
9
10
11
DISPLAY to display the sub menu
12
RETURN to exit
JPEG Thumbnail Menu
JPEG
! Pick DISPLAY from the Navigation Menu and press
to select [Thumbnail].
! Press ENTER to confirm. The Thumbnail Menu is displayed.
! Press
to select a picture.
Press
to page up or down. When you have browsed the pictures of a group,
the pictures of the next group are shown.
! Press ENTER to confirm. The selected picture is shown full size.
Rotate pictures
! Press ANGLE/PAGE while the picture is shown.
The picture is rotated clockwise by 90 degrees.
ANGLE/PAGE
WMA / MP3 / CD-Text
Group
Activate on-screen displays
WMA / MP3 / CD Text
! Information on the current track is
shown during playback.
! Press SUBTITLE to hide the on-screen display.
: Songs 3
Content : 01 - Title 1
JPEG
Group
Pictures 5
Content P1010002
Date
2004/01/25
Camera DMC-LC20
17:26
JPEG
MP3
WMA
JPEG
MP3
WMA
JPEG
! Press SUBTITLE during playback.
The picture creation date is shown.
! Press SUBTITLE to display further information.
! Press SUBTITLE to hide the on-screen display.
Select Group/Title
! Play back a disc and select the group or title on it.
! Press
to select the [Group], press
to select the [Title].
D
D
D
WMA: You cannot play copy-protected WMA files.
MP3: The appliance is incompatible with ID3 tags.
WMA, MP3, JPEG (CD-R / CD-RW): Make sure the discs are
compatible with ISO 9660 (level 1 or level 2).
13
HighMAT
HighMAT
Page 1/1
Sorted according
to artist
Sorted according
to sampler
Sorted according
to category
HighMAT (High Performance Media Access Technology) is a joint Panasonic and
Microsoft technology development. Diverse HighMAT-level 2 format data (WMA, MP3
and/or JPEG) stored on a disc by a PC can be quickly played back by the appliance with
the additional help of a menu.
While the HighMAT menu is displayed:
! Press
to select and ENTER to confirm.
Menu: Takes you to a sub-menu containing further play lists or menus.
Playlist
!
No.
Playlist title
1 Sorted according to artist
2 Sorted according to sampler
3 Sorted according to category
4. Acapella
Playlist
Group
Content
Playlist: Starts playback
! Acapella
Sorted according to artist
Press TOP MENU to show or hide the HighMAT menu.
Press RETURN to go back to the previous menu.
Press DISPLAY to show or hide the background stored on the disc.
Press SUBTITLE to show or hide information on the track.
!
!
!
!
Selecting from a Playlist
!
!
Press MENU during playback.
The play list appears ( indicates the currently playing item).
Press and then
to move from [Playlist] to [Group] and [Content] and back.
Press and then
to select an item, then press ENTER to confirm.
!
Press MENU to quit the Playlist screen.
!
0 ~ 9 to select ENTER to play
RETURN to exit
CD Text
CD Text
1/11
2:53
to select and press
14
CD Text menu
!
Disc Title :
Disc Artist :
Track Title :
Track Artist :
1. Song
2. Song
3. Song
4.
5.
6.
7.
9.
10.
!
!
!
ENTER
RETURN
to exit
Press MENU.
The CD Text menu appears on the screen.
The screen contains information on the disc and a list of tracks.
Press
to select a title.
To play the selected track, press ENTER.
Press RETURN to quit the menu.
CD-Text
DISPLAY menu
Playback status indicator (DVD-S27 only)
1
DISPLAY
!
!
!
!
C
2
G
Press DISPLAY twice to activate the playback status indicator.
Press
to change the playback speed.
Press
to display the current and the remaining playback time.
Press DISPLAY again to hide the status indicator.
Advanced Surround
Requires 2 or more audio channels.
! Press ADVANCED SURROUND.
! Press
to select any of the menu items.
Menu
Advanced Surround SP1
D
D
D
Menu
Program
1/ 1
Time
--:--:-Audio
Subtitle
Marker (VR)
Other Settings
DVD-RAM menu illustration
DISPLAY
Play Speed
AV Enhancer
Play Menu
Picture Menu
Audio Menu
Display Menu
Other Menu
DVD-RAM
Off
0 : 03 : 10
Off
SP1 Natural
SP2 Enhanced
HP1 Natural
HP2 Enhanced
DVD-Video
Video CD
RAM
- Effect off (factory default).
- Normal degree of effect on loudspeakers.
- Enhanced degree of effect on loudspeakers.
- Normal degree of effect on headphones.
- Enhanced degree of effect on headphones.
Advanced Surround is not supported by all discs.
Deactivate the Advanced Surround effect if you experience distorted sound.
Deactivate Advanced Surround if you are also using Dolby Pro Logic Amplifier. Dolby Pro Logic
will not work properly if Advanced Surround is on.
To display the DISPLAY menu.
!
!
!
!
!
!
Press DISPLAY to invoke the DISPLAY menu of the current disc.
The available options depend on the current disc.
Press
to select a sub-menu, then press or ENTER.
Press
to select a setting as described on pages 16 and 17.
Press ENTER to confirm.
Press to display another sub-menu; press
to select a setting as appropriate.
(Press to return to the previous menu.)
Press ENTER to confirm your selection.
(The items of the menus may vary depending on the contents of the disc)
Press RETURN or DISPLAY to quit the menu.
15
DISPLAY menu
16
Menu
Title
1/36
Chapter
1/27
Time
--:--:-Audio
- --Subtitle
- --Angle
-/Other Settings
DVD-Video
Menu
Track
1/ 2
Time
48:10
Audio
LR
Other Settings
Video CD
Menu
Playlist
1/ 38
Group
1/20
Content
2/12
Time
0:39
Audio
96kbps
Other Settings
HighMAT
Menu
Group
1/11
Content
1/12
Time
--:-Audio
Other Settings
WMA/MP3
Menu
Group
1/ 6
Content
1/68
Thumbnail
Rotate Picture
Slideshow
On
Other Settings
JPEG
Menu
Track
1/14
Time
48:10
Other Settings
CD
Title/Track Search: Allows you direct access to a title/track if the disc hosts several.
Program Search: Allows you direct access to a program if the disc hosts several.
Chapter Search: Allows you direct access to a chapter if the disc hosts several.
Group Search: Allows you direct access to MP3/WMA tracks or JPEG images defined
to make up a group.
GROUP
Content Search: Directly select a MP3/WMA track or JPEG image stored on the disc.
Playlist Search: Directly select a play list stored on the disc.
Time: Display/select playback time: Alternative display of current or remaining playback time.
MP3, WMA, SVCD: Shows the playback time only.
Shows the current playback time or the remaining playback time.
Time Slip: Press
to select the interval by which playback is to move back or forward.
Time Search: Use the numeric keys to specify the time at which playback is to be resumed.
Audio/Karaoke: Allows you to alter the pre-set language of synchronisation provided the disc gives you an
alternative. In the case of VCDs, you can change the left/right audio channel setting.
Subtitle/Language: Selects the language of on-screen subtitles. [Off]: No subtitles displayed.
AUDIO
SUBTITLE
Marker (VR): Select the marker tags set on a DVD-RAM by a DVD recorder.
Angle: Change between camera angles of films recorded from various camera locations.
Thumbnail: Displays the thumbnail menu. Press
Press ENTER to show the selected image full screen.
to select a JPEG image.
Rotate Picture: Select [Right] or [Left] to rotate the image on the screen in the selected direction.
Slideshow: Starts and stops the on-screen slideshow.
Choose [Interval] to set the time every slideshow picture remains on the screen (0 to 30 seconds).
ANGLE/PAGE
13
DISPLAY menu
These settings are not available
for every disc.
Play Speed: Select a factor by which to change the playback speed.
The digital audio output switches to PCM.
Other Settings
AV-Enhancer: Automatically optimises and adapts the audio and video settings to the disc used.
The Picture and Audio menus are not available when this function is enabled.
Play Speed
AV Enhancer
Play Menu
Picture Menu
Audio Menu
Display Menu
Other Menu
AV Enhancer
Play Menu
Off
Off
x1.4
x1.3
x1.2
x1.1
Normal
x0.9
x0.8
x0.7
x0.6
A-B Repeat: Playback repeats a defined section between positions A and B of a title.
Press ENTER to set starting point A and end point B. If you do not set point B, the end of the track
is used as the end point. Press ENTER to terminate this function.
Repeat: Allows you to repeat the current track or chapter.
Marker: Up to 5 positions can be tagged pressing ENTER. Press CANCEL to delete any mistakes.
Select a marker and press ENTER Playback starts at the marker tag.
The markers are cleared by opening the disc tray or switching off the appliance.
Off
On
Repeat
A-B Repeat
Marker
Off
**
Picture Menu
Picture Mode Normal
Audio Menu
Advanced Surround Off
Dialogue Enhancer Off
Attenuator
Off
Display Menu
Other Menu
PLAY SPEED
Subtitle Position
Subtitle Brightness
Just Fit Zoom
Manual Zoom
x1.00
GUI See-through Off
GUI-Brightness
0
Sleep
Off
Play as Data Disc
Picture Mode
Normal:
Factory default
Cinema1: Cinema function for viewing in dark
rooms. Bright picture areas are
dimmed down.
Cinema2:
Animation:
Dynamic:
REPEAT
PICTUREM ODE
Enhances brighter areas of dark
scenes.
Intensifies the colours.
Brightens up the picture.
Advanced Surround: Produces an effect similar to surround sound at the two front speakers
(SP) or the headphones (HP). Deactivate this function if the sound becomes distorted.
Dialogue Enhancer: Puts up the volume of feature film dialogues.
Attenuator: Adapts the volume to the TV set connected (e.g. after sound problems).
Subtitle Position :
Subtitle Brightness:
Just Fit Zoom:
Manual Zoom:
GUI See-through:
GUI-Brightness:
AV ENHANCER
Vertically moves the subtitle shown.
Modifies the brightness of the subtitle shown.
Allows you to select a pre-defined picture size.
Zooms into the image to enlarge it by up to twice its original size.
The background of OSD text becomes transparent.
User-defined brightness of OSD text.
Sleep: After the set time, the appliance goes into stand-by mode. Choose Auto to have the
appliance go into stand-by mode 5 minutes after the end of the available runtime.
Play as HighMAT / Play as Data Disc: Stop the HighMAT disc and choose to play it as a data disc
or as a HighMAT-format disc.
Play as DVD-VR / Play as Data Disc: Stop the DVD-RAM and choose to play JPEGs
or the programme.
ADVANCED
SURROUND
15
ZOOM
10
12
12
17
SETUP menus
To display the Setup menu
! Press SETUP to display the Setup menu.
! Press
to select a sub-menu, then press .
! Press
to select the option to be changed,
then press ENTER to confirm.
! Press
to select a setting option, then press
ENTER to confirm.
! Press
to select the next menu item.
! Press RETURN to quit the menu.
Menu Disc
Audio
Subtitle
Menus
Ratings
Setup
Disc
Video
Audio
Display
Others
Audio
Subtitle
Menus
English
Automatic
English
Ratings
Level 8
to select and press ENTER
4:3 TV aspect ratio
Letterbox:
Menu Video
TV Aspect
Sets the aspect ratio to 16:9 or 4:3 (Pan&Scan/Letterbox).
TV Type
Selects the connected type of TV set.
Time Delay
When using an audio amplifier together with a plasma TV or a digital TV, the
picture can be delayed in relation to the sound signal. You can synchronize the
picture signal with the sound using the Time Delay setting.
AV Output
Selects the video signal from the scart socket (Video, S-Video, RGB).
RETURN to exit
Pan&Scan:
Still Mode
NTSC Disc Output
18
Disc’s Audio Preference / Subtitle Preference / Menu Preference.
Select the preferred language of either of the items. If the language you want
is not on the list, select [Other] and type in the appropriate country code (see
last page).
Assign a ranking to disallow the viewing of some scenes [1-7] or the entire DVD
video disc [0] and specify a password to guard access to the disc contents.This
feature is not supported by all DVD video discs.
! Type in a 4-digit code using the numeric key pad of your remote control unit,
then press ENTER to confirm it.
! Press or CANCEL to delete any mistakes..
A closed padlock icon is displayed while this feature is enabled. Make sure
not to forget your password code.
To change the setting
! Enter your password code and press ENTER to confirm.
! Change the setting as appropriate and press ENTER to confirm.
8
Select a picture quality for still image mode:
Automatic: The unit selects the optically better type of image.
Field: Poorer quality than a picture frame.
Frame: Although the image may be somewhat fuzzy, its quality is
better than that of a field-based still image.
To play a NTSC disc, select a colour rendition standard (NTSC/PAL60) that
matches the function of your TV set.
SETUP menus
Menu Audio
Dolby Digital / DTS Digital
Surround / MPEG:
Please choose the correct settings
matching your audio system:
Your equipment Your equipment
can not decode can decode the
the signal
signal
Dolby
Digital
DTS Digital
Surround
PCM
Bitstream
PCM
Bitstream
MPEG
PCM
Bitstream
PCM Digital Output
PCM is the standard method used to record digital music signals on Audio CDs. For
reasons of copyright protection, the digital output of PCM audio signals may be limited
to 48 kHz/16 bit. Choose [Up to 48 kHz] if the digital audio outlet is used to connect
your player to an amplifier that only processes sampling frequencies of up to 48 kHz.
Dolby Digital
DTS Digital Surround
MPEG
Change the setting to PCM if the connected equipment fails to decode the relevant
signal. High noise levels may otherwise damage your ears or the loudspeakers.
Adapt the settings to the ratings of your audio system.
Dynamic Range Compression
Available in the Dolby Digital (DVD) format only.
The volume range is compressed by dynamically putting up the level of
soft passages and lowering the level of loud passages.
Audio during Search
Choose to have the sound on or off during the search.
Menu Display
Menu Language
Select the language of the appliance's menus as appropriate.
On-Screen Messages
Select [No] to suppress the display of OSD text.
Menu Others
HighMAT
You can set the display panel brightness to [Bright], [Dim] or [Automatic]. Choose
[Auto] to dim the display panel during playback and restore its full brightness when the
function keys are pressed.
On: If no disc is playing, the appliance goes into stand-by mode after
approx. 30 minutes.
Enable: Activates HighMAT playback
14
Disable: Plays HighMAT discs in the MP3/WMA/JPEG format.
QUICK SETUP
Lets you change the basic settings or your appliance.
8
Re-initialize Setting
Resets the appliance to factory defaults. Following reset and initialisation,
press SETUP to run the QUICK SETUP utility again.
8
FL Dimmer
Auto Power Off
19
Before requesting service
GENERAL PROBLEMS
The player does not respond to function key commands:
!
!
!
!
Certain control operations are not available with some discs.
There may be interference caused by lightning or static charge.
Press [ ] to put the player into stand-by mode.
Restart the player.
Unable to change the audio track or the subtitle language:
!
!
The subtitles are not shown:
!
Playback does not start after pressing PLAY:
!
!
!
!
!
!
Condensation has accumulated inside the player. Wait for 1 to 2 hours.
The player only supports DVDs with regional code 2, ALL or from a group of
regional codes containing regional code 2.
The disc is dirty or damaged.
The disc is in the wrong way round. The label of the disc you wish to play
must face up.
Problem caused by a disc
!
!
!
!
!
!
Do not stick labels on the disc (this might render the disc useless).
Only use a suitable pen for writing on the disc.
Do not insert cleaning discs into the appliance.
Do not play discs with any glue from stickers still on them.
Do not play cracked discs.
Do not play warped or irregularly shaped discs.
!
First wipe the disc (DVD-RAM /
DVD-V / VCD / CD) with a
wet cloth, then with a dry cloth.
If available, use the optional
DVD-RAM/PD disc cleaner (LF-K200DCA1) to clean the DVD-RAM / DVD-R.
Do not use clothing or other disc cleaners.
!
20
You can only choose from the languages actually recorded on the disc.
Some discs require you to change the setting via the Disc menu. 18
The disc does not provide any subtitles.
You deactivated the display of subtitles.
The subtitles are at the wrong position.
Move the position of subtitles.
17
The audio track or subtitles do not use the language selected from the menu:
!
The disc does not provide the language you selected.
The remote control unit does not work:
!
!
Verify that the batteries are in the right way round (+ and -).
Point the RC unit at the front of the appliance.
Unable to change the aspect angle:
!
It depends on the disc whether this function is available.
You forgot your password:
!
Stop the player and keep pressing player button together with
and
also
OPEN/CLOSE until [Initialised] disappears from the screen. This
restores all factory defaults. When you are done switch off the unit and back
on afterwards.
Afterwards, display the QUICK SETUP menu to re-initialise
8
the appliance to your preferences.
OPEN/CLOSE
Before requesting service
DISPLAYED PROBLEMS
SOUND AND PICTURE PROBLEMS
There is no audio output and the sound is distorted:
!
!
Check the connections.
Deactivate the Advanced Surround effect.
Message [Disc is incompatible with this player] is displayed:
!
15
The loudspeakers emit loud noise:
!
Go to the Setup screen and check the Audio menu settings
of [Dolby Digital], [DTS Digital Surround] and [MPEG].
!
19
!
!
This is a technical issue and not indicative of a malfunction.
!
!
Go to the Setup menu and change Display menu setting
[On-Screen Messages] to [On].
Check the [TV Aspect] setting.
Error code [U
Check the connections.
Verify that the correct video input of the TV set has been selected.
!
!
The picture is cut off at its left or right edge:
!
23
19
The OSD displays are cut off along their top edge:
No picture appears on the screen:
!
The player cannot play discs of the current format.
The disc contains no recorded material.
No messages are output to the screen:
The picture is disturbed when searching:
!
!
!
Check the Video menu's [TV Aspect] setting on the Setup screen. 18
Check that the player is directly plugged into the TV set's
[AV Output] and not to a video cassette recorder between the two units.
Check the Zoom setting.
!
!
17
] or [H
18
] appears:
U11: Disc is dirty. Wipe it clean.
U15: You inserted a DVD-R that has not been finalized.
H
: This is indicative of a malfunction. The digits following "H" depend
on what state your player is in.
Press
to put the player into stand-by mode, then briefly unplug and reattach the AC mains cable.
Contact the aftersales service if this does not remove the problem. Please
state the error code displayed by the set.
21
Information
Region codes
This player accesses the regional codes stored on DVDs.
It supports all discs assigned regional code "2" or "ALL".
UK and continental Europe: "2".
Disc forms
Never play anything but circular discs with a
diameter of 3" ( 8 cm ) or 5" ( 12 cm ). Discs of
other shapes may damage the player hardware.
HighMAT and the HighMAT logo
are trademarks or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
Playing DVDs and VCDs
The producer of the programme material can define the way in which the disc is played.
Consequently, you may sometimes find that, in some cases, you cannot control the playback the
way you wish using all of the functions and operations described in these operating instructions.
We therefore recommend that you always read the reference material delivered with the disc.
Press SUBTITLE to display/quit the track information on TV screen.
The player may take some time to read all of the disc information!
DVD menu
Some DVDs have multiple menus. Pressing TOP MENU to display the main menu may take to
another menu than pressing MENU to display the menu screen.
Title
DiscTop menu
Menu
TOP MENU
Title
Menu
Title
D The functions assigned to these
Menu
MENU
buttons depend on the disc.
Please refer to the disc
documentation leaflet.
Windows Media and the Windows logo
are trademarks or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
Dolby Digital
22
MP3 or MPEG 1 Audio Layer 3 is a file compression format used for digital audio files.
It provides files of an extremely small size and may cause a consequential loss of quality.
WMA is a file compression format developed by Microsoft. It achieves the same sound quality
as MP3 with a file size that is smaller than that of MP3.
MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson multimedia.
Method of encoding digital signals. The signals are very
much compressed in the process to enable recordings of
large volumes of data.
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are
trademarks of Dolby Laboratories.
DTS (Digital Theater Systems)
This product features a copyright protection implement whose technology is protected by US
patents and intellectual property rights owned by Macrovision Corporation and other copyright
proprietors. The use of this copyright protection implement is subject to permission of Macrovision
Corporation and is restricted to purely private use only. It is prohibited to examine this appliance
for the purpose of unlicensed construction.
Sound system used in cinemas or movie theaters all over
the world.
"DTS" and "DTS 2.0 + Digital Surround" are
trademarks of Digital Theater Systems, Inc.
Decoder
This appliance features an internal Dolby Digital decoder and a
DTS decoder. You can enjoy these systems in stereo quality
without the need of a separate decoder.
Specifications
D Depending on the disc type and the
Disc formats S27 / S24
DVD-Video
DVD-R
(without
Cartridge)
DVD-V
220-240 Volt mains voltage,
50 Hz
Power consumption:
9 Watt
Power consumption in stand-by: < 1 Watt
SVCD
Video-CD
CD
CD-R/RW
---
conditions of recording, the appliance
may sometimes fail to play the listed
discs.
D DVD-RAM with JPEG: Recorded with
Panasonic DVD-Video recorders. To
play JPEG files, select [Play as Data
Disc] in DISPLAY menu (page 17).
Power supply:
DVD-RAM
Audio output:
Output level:
Output sockets:
IEC62107
RAM
JPEG
2 Vrms (1 kHz, 0 dBFs)
Female cinch 2 channels / AV
Scart 2 channels (L/R)
Dimensions:
430(W) x 227(D) x 55(H) mm Audio output signal ratings:
! Frequency response:
Weight:
1.9 kg
Operating temp. range:
+41°F to +95°F(+5°C to +35°C) DVD (linear PCM audio): 4 Hz to 22 kHz
Humidity during operation:5 to 90 % rel. humidity
(sampling frequency 48 kHz)
(non-condensing)
4 Hz to 44 kHz
(sampling frequency 96 kHz)
Compatible video system:
Audio-CD:
4 Hz to 20 kHz
PAL 625/50, PAL 525/60, NTSC ! Signal-to-noise ratio:
Audio-CD:
115 dB
! Dynamic range:
Video output:
Output level:
1 Vpp (75 Ohm)
DVD (linear PCM audio): 100 dB
Output socket:
Female cinch
Audio-CD:
98 dB
! Total harmonic distortion:
Scart output:
Audio-CD:
0.0025 %
RGB output level:
0.7 Vpp (75 Ohm)
Video output level:
1 Vpp (75 Ohm)
Digital audio output:
C output level:
PAL/PAL 60 : 0.3 Vpp;
COAXIAL
NTSC : 0.286 Vpp (75 Ohm)
Output socket:
Female cinch
Output socket:
21-pin AV Scart (S-Video/
Output level:
0.5 Vpp (75 Ohm)
RGB included)
VCD
CD
Pickup:
Wave length:
Laser classification:
Norsk:
Bølgelengde:
Laserstyrke:
Compatible disc formats:
WMA, MP3, JPEG :
WMA MP3
JPEG
662 nm / 785 nm
CLASS 2 / CLASS 3a
662 nm / 785 nm
Ingen farlig stråling sendes ut
DVD-V, DVD-RAM, DVD-R,
CD-Audio, CD-R/RW(CD-DA,
VCD, SVCD, MP3, WMA,
JPEG formated discs),
HighMAT Level 2 (Audio and
Image).
Max. 4000 tracks/ 400 groups.
Compatible compression rate:
MP3 :
32 - 320 kbps
WMA :
48 - 192 kbps
JPEG format :
Exif Version 2.1 Baseline files
Picture resolution between
320 x 240 and 6144 x 4096;
sub sampling 4:2:2 or 4:2:0
! Technical specifications subject to change without notice.
! Weight and dimensions are approximate values.
23
Index
Page
15,17
16
18
10,19
4,6,17
Advanced Surround
Angle
Audio Preference
Autom. Power Off
AV Enhancer
Laser
Letterbox
3
18
Batteries
Bitstream
2
19
Chapter review
COAXIAL
Menu Preference
MP3
MPEG
10
5
NTSC Disc Output
Dialogue Enhancer
17
Digital connectors
5
Disc formats
22,23
Dolby Digital
5,19,22
DTS Digital Surround
5,19,22
DVD menu
22
Dynamic Range Compression 19
Field
Frame
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
18
12,13
5,19
PAL 60
Pan&Scan
PCM Digital Output
Picture Mode
Play list
Playback
POSITION MEMORY
Program Play
18
18
18
5,19
17
11
9,10,11
10
11
18
18
Country codes
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali
Bhutani
Page
5
12,13
Home cinema
JPEG
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
Esperanto
Estonia
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laotian
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
Latin
Latvian
Lingala
Lithunian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
7665
7686
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
RAM
Random Playback
Ratings
Region codes
Remote control
Repeat
Resume
RGB
Page
11
10
18
22
6
9
7
8,18
Scene replay
Search
SETUP Menu
Single frame mode
SKIP
Slow motion
Still Mode
Subtitle
7
12
18,19
9
7
7
18
16,18
TOP MENU
TV Aspect
6,14,22
8,18
WMA
12,13
Zoom
17
Oriya
Pashto
Persian
Polish
Portuguese
Punjabi
Quechua
Rhaeto-Rom.
Romanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croat.
Shona
7982
8083
7065
8076
8084
8065
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
Sindhi
Singhalese
Slovac
Slovenian
Somali
Spanish
Sundanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugo
Thai
Tibetan
8368
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
F17B04-0
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
RQTD0106-1A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising