Panasonic SCHT833V Operating Instructions

Panasonic SCHT833V Operating Instructions
RQT7921-P_ENG.book
1 ページ
2005年5月25日 水曜日 午後3時24分
Operating Instructions
DVD/VHS Home Theater
Sound System
Model No.
SC-HT830V
SC-HT833V
ADVANCED
PROGRESSIVE SCAN
(DVD)
page
EASY-TO-USE 5 DVD/CD
CHANGER WITH QUICK
START CD KEY
page
SC-HT833V is only for the U.S.A.
Region number
The player plays DVD-Video marked with labels containing the region
number “1” or “ALL”.
Example:
1
ALL
1
2
8
18
LONG 10h RECORDING/
PLAYBACK & HIGH SPEED
x600 TAPE REWIND
(VHS)
page
28
4
If you have any questions, please call
In the U.S.A.: 1-800-211-PANA (7262)
In Canada: 1-800-561-5505
Before connecting, operating or adjusting this product, please
read the instructions completely. Please keep this manual for
future reference.
[For\U.S.A.\only]
The warranty can be found on page 49.
[For\Canada\only]
The warranty can be found on page 50.
P
PC
RQT7921-4P
RQT7921-P_ENG.book
2 ページ
2005年5月25日 水曜日 午後3時24分
Dear customer
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully.
System
SC-HT830V/SC-HT833V
Center speaker
SB-PC730
(SC-HT830V/SC-HT833V)
Main unit
SA-HT830V (SC-HT830V)
Active subwoofer
SB-WA830 (SC-HT830V)
SA-HT833V (SC-HT833V)
Front speakers
SB-FS730
(SC-HT830V/SC-HT833V)
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK
OR PRODUCT DAMAGE, DO NOT EXPOSE THIS
APPARATUS TO RAIN, MOISTURE, DRIPPING OR
SPLASHING AND THAT NO OBJECTS FILLED WITH
LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON
THE APPARATUS.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,
BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.
ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT
RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
Before moving the unit, ensure the disc trays and video
cassette slot are empty.
Failure to do so will risk severely damaging the discs, video
cassette tape and the unit.
SB-WA833 (SC-HT833V)
Surround speakers
SB-FS731
(SC-HT830V/SC-HT833V)
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
CAUTION:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
≥Reorient or relocate the receiving antenna.
≥Increase the separation between the equipment and receiver.
≥Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
≥Consult the dealer or an experienced radio/TV technician for
help.
Any unauthorized changes or modifications to this equipment
would void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
CAUTION
Avoid use or placing highly magnetic devices (Speakers etc.)
or devices that emit strong electro-magnetic waves (mobile
telephones etc.) near the main unit.
≥The above may result in problems with audio and video, and
recorded content may be lost.
≥Be extra cautious when you are using a plasma television,
keeping these devices as far away as possible.
Stacking
Place the unit in a horizontal position, and do not place anything
heavy on it.
The socket outlet shall be installed near the equipment and easily
accessible or the mains plug or an appliance coupler shall remain
readily operable.
RQT7921
2
≥Operating while there is condensation in the unit or on the
cassette tape may cause the tape to catch upon the cylinder
resulting in the tape being cut, or not being able to remove the
cassette tape from the unit. The unit also may not work properly
if the unit's cylinder or heads have been damaged.
≥Wait 1–2 hours for condensation to evaporate (do not operate
the unit during this time).
RQT7921-P_ENG.book
3 ページ
2005年5月25日 水曜日 午後3時24分
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit.
Follow the safety instructions on the unit and the applicable safety
instructions listed below. Keep these operating instructions handy for
future reference.
1) Read these instructions.
2) Keep these instructions.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for
long periods of time.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
14) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
Tape information
(Inside of product)
Tray/disc handling procedure
∫ Tapes
≥You can use tapes with the VHS and S-VHS marks, but this unit is
unable to make full use of the characteristics of S-VHS tapes.
≥Break out the tape’s tab to prevent accidental
erasure. Cover the hole with a double layer of
adhesive tape when you want to use the tape
for recording again.
≥Not doing the following will cause damage to the unit.
B
A
OPEN/CLOSE
Tab
∫ S-VHS Quasi Playback (SQPB)
You can play tapes recorded with the S-VHS system, however some
noise may occur with some types and this unit cannot take advantage
of S-VHS’s high resolution.
This unit cannot make S-VHS recordings.
[A] ≥Always press [< OPEN/CLOSE] to insert or remove a disc.
∫ Tape care
[B] ≥Place the disc label up in the center of tray.
Poor quality or damaged tapes can cause the heads to become dirty
and malfunction. Store your tapes carefully and discard when they
become dirty or damaged.
≥Do not push or pull out the tray by hand as this will cause an
accident.
≥Insert only one disc into each tray.
Never use tapes on which juice has been spilt or those that are
extremely damaged since this will not only cause the heads to become
dirty, but will also make the unit malfunction.
∫ About descriptions in these Operating
Instructions
≥Pages to be referred to are indicated as l±±.
∫ Caution
Tapes that are inserted slightly offset cannot be loaded into the unit.
Insert the tapes straight into the unit to prevent malfunction.
≥Operations in these instructions are described mainly with
the remote control, but you can do the operations on the
main unit if the controls are the same.
RQT7921
3
RQT7921-P_ENG.book
4 ページ
2005年5月25日 水曜日 午後3時24分
Table of contents
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . 3
Tape information. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Tray/disc handling procedure . . . . . . . . . . . . . . . . . . 3
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Manual tracking . . . . . . . . . . . . . . . . . . . . . . . . . . .
Vertical locking adjustment . . . . . . . . . . . . . . . . . .
Picture mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
29
29
29
29
Manual recording . . . . . . . . . . . . . . . . . . . . . . . 30
Recording a program . . . . . . . . . . . . . . . . . . . . . . . 30
Using another source while recording . . . . . . . . . . 31
Recording from other equipment . . . . . . . . . . . . . . 31
STEP1 Front speaker assembly . . . . . . . . . . . 5
STEP2 Positioning . . . . . . . . . . . . . . . . . . . . . . 6
STEP3 Connecting speakers with the
subwoofer . . . . . . . . . . . . . . . . . . . . . . 7
STEP4 Video connections . . . . . . . . . . . . . . . 7
Basic connection . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
For better video from DVD . . . . . . . . . . . . . . . . . . . . 8
Timer recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Convenient functions
(Jet Navigator, VISS, On-screen display) . . . . . . . . . . . 34
Jet Navigator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Saving Jet Navigator data . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Jet Navigator to find programs . . . . . . . . . . . . . . . . . .
Finding programs—VHS Index Search System (VISS) . . . . . . .
On-screen display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
34
34
34
35
35
STEP5 Radio and system connection . . . . . . 9
Changing settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Optional FM antenna connection . . . . . . . . . . . . . . . . . 10
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CLOCK SET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CHANNEL SET. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
STEP6 The remote control . . . . . . . . . . . . . . . . . . . . . . . 11
STEP7 Plug-in Auto Tuning . . . . . . . . . . . . . . . . . . . . . . 11
STEP8 TV manufacturer setting . . . . . . . . . . . . . . . . . . 12
STEP9 DVD QUICK SETUP . . . . . . . . . . . . . . . . . . . . . . 12
Control reference guide. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
36
36
37
38
39
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Main unit and subwoofer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Main unit display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
The radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Discs that can be played . . . . . . . . . . . . . . . . . 15
Sound field and sound quality . . . . . . . . . . . . 41
Disc handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Basic play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Using main unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Using remote control . . . . . . . . . . . . . . . . . . . . . . . 17
Convenient functions . . . . . . . . . . . . . . . . . . . . 18
Disc information . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displaying current playback condition
(QUICK OSD). . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CD Mode (CD sequential play) . . . . . . . . . . . . . . .
Quick replay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reviewing title to play (Advanced Disc Review) . . . . . . . . . . . .
Skipping one minute forward (CM skip) . . . . . . . . . . . . . . . . . . .
Changing the zoom ratio (Zoom) . . . . . . . . . . . . . . . . . . . . . . . .
Changing soundtracks (Audio) . . . . . . . . . . . . . . . . . . . . . . . . . .
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Program/Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Multi Re-master . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18
18
18
18
18
18
19
19
19
20
21
Using navigation menus . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Playing data discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displaying CD text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playing HighMATTM discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playing RAM discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
22
22
23
23
Using On-Screen Menus . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Main menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Other settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Changing the player settings . . . . . . . . . . . . . . . . . . . . . . 26
Changing the delay time (Speaker Setting) . . . . . . . . . . . . . . . . 27
Automatic presetting. . . . . . . . . . . . . . . . . . . . . . . . 40
Manual tuning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Selecting the preset channels . . . . . . . . . . . . . . . . 40
Sound Field Control . . . . . . . . . . . . . . . . . . . . . . . .
Super Surround . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dolby Pro Logic II . . . . . . . . . . . . . . . . . . . . . . . . .
Center Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Speaker level adjustments . . . . . . . . . . . . . . . . . .
Enhancing the bass sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Down-mixing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Subwoofer level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
41
41
41
41
41
42
42
42
Other convenient features . . . . . . . . . . . . . . . . . . . . . . . . 42
Sleep timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Muting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Using headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Other speaker setup options . . . . . . . . . . . . . . . . . . . . . . 43
Optional connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Listening to an external source/
Recording to other equipment . . . . . . . . . . . . . . . . . . . . . . . . . 43
Connecting a cable TV box/satellite receiver . . . . . . . . . . . . . . . 44
If the antenna connector doesn’t match . . . . . . . . . . . . . . . . . . . 44
Troubleshooting guide . . . . . . . . . . . . . . . . . . 45
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . .
Limited Warranty (ONLY FOR U.S.A.). . . . . . .
Limited Warranty (ONLY FOR CANADA) . . . .
Product Service . . . . . . . . . . . . . . . . . . . . . . . .
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
48
49
50
50
51
Accessories . . . . . . . . . . . . . . . . . . . . . . . .Back cover
RQT7921
4
RQT7921-P_ENG.book
5 ページ
2005年5月25日 水曜日 午後3時24分
Simple setup
1
STEP
Front speaker assembly
The supplied stands are specially designed for
attachment to Panasonic SB-FS730 front speakers.
Use only as indicated in this setup.
Preparation
≥To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥For assembly, use a Phillips-head screwdriver.
≥Make sure you have all the indicated components before starting assembly, setup, and connection.
≥There is no difference between the right and left speakers and pipes.
2kFront
speakers
1
4kPipes
2kPipe A
2kPipe B
(with a cable)
2kBases
3
Attach pipes B to the bases.
A Insert pipe B.
Match these holes when
you insert the pipe.
4kWasher 4kBracket
screws
screws
2kSmall 2kBrackets
screws
8kRubber
pads
Attach pipes A to the speakers.
Slot the screw head in between the 2 stoppers of the speaker
groove.
Align the screw head with the speaker groove.
Ensure the pipe is fastened on straight by gradually tightening the right
and left screws alternately until fully tightened.
To prevent short-circuit, do not cover the connection terminals
with the pipe.
Pipe B
Base
Bracket screws
B Secure pipe B to the base.
Pipe A
Ensure the screws are securely fastened.
Bracket
Washer screws
Screw head
Phillips-head
screwdriver
Front speaker
Stoppers
2
Connection terminals
Assemble the pipes.
A Thread the speaker cable from Pipe A through Pipe B
and the base.
For quicker threading, loosely fold the cable in half (do not
crease), pass the folded portion through the pipe, and then
pull the rest of the cable through the base.
4
Rear of the speaker
Twist the vinyl tip and pull off.
≥If the cords do not have vinyl tips,
directly connect them to the terminals.
Cable
Pipe B
_: White
`: Blue
B Join Pipe A to Pipe B.
Pipe B
Connect the speaker cables.
Cable
Push!
Pipe A
5
C Secure the pipes.
Ensure the screw is securely fastened.
Small screw
Pipe B
Secure the speaker cable to the base.
A Press the speaker
B Press the speaker
cable into the
base cover groove
as far as possible.
cable against the
base while
threading it
between the pegs.
Pipe A
Cable
Bottom side of base
[Note]
You can use the front speakers without assembling with the stands. In this case, attach the included
rubber pads to the base of the speakers. This prevents vibration from causing the speakers to move or
fall over. Use 4 pads per speaker.
RQT7921
5
RQT7921-P_ENG.book
6 ページ
2
STEP
2005年5月25日 水曜日 午後3時24分
Bottom of surround speaker
Positioning
How you set up your speakers can affect the bass and the sound field. Note the following points.
≥Attach the included rubber pads to the base of the center and surround speakers. This
prevents vibration from causing the speakers to move or fall over. Use 4 pads per
speaker.
≥Place speakers on flat secure bases.
≥Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover
walls and windows with thick curtains.
Front
(L)
Front
(R)
Surround
(L)
Surround
(R)
Rubber pads
Bottom of center speaker
Center
Rubber pads
Subwoofer
Setup example
6
Main unit
Place the front, center and surround speakers at approximately
the same distance from the seating position. The angles in the
diagram are approximate.
l See page 43 for other speaker setup options.
≥Use only supplied speakers
Using other speakers can damage the unit and sound quality will be
negatively affected.
≥Set the speakers up on an even surface to prevent them from falling.
Take proper precautions to prevent the speakers from falling if you
cannot set them up on an even surface.
Main unit
Note
Keep your speakers at least 10mm (13/32q) away from the system for
proper ventilation.
Center speaker
≥Vibration caused by the center speaker can disrupt the picture if it is
placed directly on the television. Put the center speaker on a rack or
shelf.
≥To prevent the speakers from falling do not place the speakers
directly on top of the television.
Subwoofer
Place to the right or left of the television, on the floor or a sturdy shelf
so that it won’t cause vibration.
Leave 10 cm (4q) at the rear for ventilation.
Notes on speaker use
≥You can damage your speakers and shorten their useful life if you
play sound at high levels over extended periods.
≥Reduce the volume in the following cases to avoid damage.
– When playing distorted sound.
– When the speakers are receiving howling from a record player,
noise from FM broadcasts, or continuous signals from an oscillator,
test disc, or electronic instrument.
– When adjusting the sound quality.
– When turning the unit on or off.
Caution
≥The main unit and supplied speakers are
only to be used as indicated in this setup.
Failure to do so may lead to damage to the
amplifier and/or the speakers, and may
result in the risk of fire. Consult a qualified
service person if damage has occurred or if
you experience a sudden change in
performance.
≥Do not attempt to attach these speakers to
walls using methods other than those
described in this manual.
Surround speaker
∫ Preventing the speakers from falling over
Preparation
Attach screw eyes (not included) to secure the speakers to the wall
≥You will need to obtain the appropriate screw eyes to match the walls
or pillars to which they are going to be fastened.
≥Consult a qualified housing contractor concerning the appropriate
procedure when attaching to a concrete wall or a surface that may
not have strong enough support. Improper attachment may result in
damage to the wall or speakers.
Screw eye (not included)
String (not included)
Wall
Caution
Do not stand on the base and shake the
speaker.
Be cautious when children are near.
Rear of the speaker
RQT7921
6
Approx. 150 mm (529/32z)
1 Thread the string (not included) through the slot on the rear of the
speaker to prevent it from falling over.
2 Loop the string through the screw eye and tie tightly.
RQT7921-P_ENG.book
7 ページ
3
STEP
2005年5月25日 水曜日 午後3時24分
Connecting speakers with the subwoofer
≥Attach the speaker-cable stickers to make connection easier.
≥The terminals of the subwoofer have high output power. Carefully connect the speaker wires.
Sheet of speaker-cable stickers
Speaker cables
≥1kshort cable: For center speaker
≥2klong cables: For surround speakers
RQCA 1029
Speaker-cable sticker
2 FRONT (R)
1 FRONT (L)
4 SURROUND (R)
3 SURROUND (L)
5 CENTER
SUBWOOFER
[Note]
≥Never short-circuit positive
(i) and negative (j)
speaker wires.
≥Be sure to connect only
positive (White) wires to
positive (i) terminals and
negative (Blue) wires to
negative (j) terminals.
Incorrect connection can
damage the speakers.
Insert the wire fully.
White
Blue
Click!
4
STEP
Video connections
Basic connection
75 ≠ coaxial cable
Connect video cables directly to your
television
The video signals on DVDs and videotapes have
copyright protection. The video may not be shown
correctly if you connect through an A/V selector or
other equipment.
Video cable
Antenna cable (not included)
(usually disconnected from the television)
TO
SB-WA830
A
From
RF IN
75
Cable TV
DVD
DVD/VHS
EXT
LOOP
ANT
GND
LOOP
DIGITAL
TRANSMITTER
FM
ANT
AM
ANT
RF OUT
VIDEO
Y
PB/
CB
L
P R/
CR
R
EXT
AC IN
S-VIDEO COMPONENT
VIDEO OUT
OUT
OUT
IN
Main unit
Outdoor antenna
If the connector doesn’t
match l 44
75 ≠ coaxial
cable
(included, l 8)
Video cable
(included)
Television
(not included)
Indoor antenna
VHF/UHF
RF IN
VIDEO
IN
RQT7921
7
RQT7921-P_ENG.book
8 ページ
2005年5月25日 水曜日 午後3時24分
75 ≠ coaxial cable
This cable carries broadcast signals to the television whether the unit
is on or off so you do not need to connect the antenna directly to the
television.
But the picture and sound signal from this unit does not go
through the 75 ≠ coaxial cable to the TV. Make sure you connect
one of the following terminals on this unit to the TV; the VIDEO
OUT terminal, the S-VIDEO OUT terminal or the COMPONENT
VIDEO OUT terminal. If the TV has none of these terminals,
consult your local dealer.
To enjoy cable and satellite television
Connection l 44
Subscribe to a cable or satellite company.
If irregular coloring occurs on your television
The supplied speakers are designed to be used close to a
television, but the picture may be affected with some televisions
and setup combinations.
If this occurs, turn the television off for about
30 minutes.
The television’s demagnetizing function should correct the
problem. If it persists, move the speakers further away from the
television.
For better video from DVD
The following connections are for video from the DVD section only. Make sure you have connected the VIDEO OUT terminal with the
television to view video from the VHS section.
You may need to change the video-input mode on the television to view video from the VHS and DVD sections. Read your television’s
operating instructions for details.
∫ Connecting a television with COMPONENT VIDEO IN terminals
Antenna cable
(not included)
Main unit
DVD
DVD/VHS
To VHF/UHF IN
Component video cables
(not included)
TO
SB-WA830
A
To VIDEO IN
Video cable (included)
EXT
Television
(not included)
LOOP
ANT
GND
RF IN
75
FM
ANT
LOOP
AM
ANT
DIGITAL
TRANSMITTER
Y
Y
PB/
CB
RF OUT
PB
PR/
CR
EXT
S-VIDEO COMPONENT
VIDEO OUT
OUT
PR
OUT
IN
COMPONENT
VIDEO IN
75 ≠ coaxial cable (included)
COMPONENT VIDEO OUT terminals
These terminals can be used for either interlace or progressive output
and provide a purer picture than the S-VIDEO OUT terminal.
Connection using these terminals outputs the color difference signals
(PB/CB, PR/CR) and luminance signal (Y) separately in order to achieve
high fidelity in reproducing colors.
≥The description of the component video input terminals depends on
the television or monitor (e.g. Y/PB/PR, Y/B-Y/R-Y, Y/CB/CR). Connect
to terminals of the same color.
≥After making this connection, change the black level for a better
picture (l 27, “Video”—“Black Level Control”).
To enjoy progressive video
≥Connect to the component video input terminals on a 480p
compatible television. (Video will not be displayed correctly if
connected to an incompatible television.)
≥All televisions manufactured by Panasonic and that have 480p input
connectors are compatible. Consult the manufacturer if you have
another brand of television.
∫ Connecting a television with an S-VIDEO IN terminal
Antenna cable
(not included)
Main unit
Video cable (included)
To VIDEO IN
To VHF/UHF IN
TO
SB-WA830
A
DVD
DVD/VHS
EXT
LOOP
ANT
GND
RF IN
75
FM
ANT
LOOP
AM
ANT
DIGITAL
TRANSMITTER
S-VIDEO
IN
Y
PB/
CB
RF OUT
PR/
CR
EXT
S-VIDEO COMPONENT
VIDEO OUT
OUT
OUT
IN
Television
(not included)
S-video cable
(not included)
75 ≠ coaxial cable (included)
S-VIDEO OUT terminal
The S-video terminal achieves a more vivid picture than the VIDEO
OUT terminal by separating the chrominance (C) and luminance (Y)
signals. (Actual results depend on the television.)
RQT7921
8
[Note]
Connect to a different terminal group than that you used for the video
cable (e.g., “VIDEO 2”).
Picture from this unit’s VHS will not appear when you use the same
group input terminal connections because the S-video terminal input
takes precedence.
RQT7921-P_ENG.book
9 ページ
5
STEP
2005年5月25日 水曜日 午後3時24分
Radio and system connection
System cable
AM loop antenna
FM indoor antenna
2 AC power supply cords
Connect the AC power supply cords after all other connections are complete.
AM loop antenna
AC power supply cord
Stand the antenna up on its base.
To household AC outlet
Place the antenna where the
(AC 120 V, 60 Hz)
reception is best.
Keep loose antenna cord away from
other wires and cords.
AC power supply cord
Click!
FM indoor antenna
To household AC outlet
(AC 120 V, 60 Hz)
Catch up
Adhesive tape
Fix the other end of
the antenna where
reception is best.
Subwoofer
To disconnect
Press the catch and
pull out.
A
TO
SB-WA830
DVD
A
DVD/VHS
EXT
LOOP
ANT
GND
RF IN
75
LOOP
DIGITAL
TRANSMITTER
FM
ANT
AM
ANT
VIDEO
Y
RF OUT
PB/
CB
L
PR/
CR
R
EXT
AC IN
S-VIDEO COMPONENT
VIDEO OUT
OUT
OUT
IN
Main unit
System cable
1
Push and insert the
antenna cables in as
far as possible.
2
Loosen the terminal
with a Phillips-head
screwdriver.
4
Tighten the terminal
screw again.
Catch up
To disconnect
Press the catch
and pull out.
White
Red
3
Black
Set your surround sound free!
Panasonic SH-FX50 Digital Transmitter and Receiver
(optional)
When you insert the digital transmitter into the DIGITAL TRANSMITTER slot of the main unit and
connect the surround speakers to the receiver, you can enjoy wireless surround speaker sound
except when VHS audio type is on mono sound mode.
For details, please refer to the operating instructions for Panasonic SH-FX50 Digital Transmitter and
Receiver.
TO
SB-WA830
A
LOOP
ANT
GND
RF IN
75
FM
ANT
LOOP
AM
ANT
DIGITAL
TRANSMITTER
RF OUT
EXT
S
DIGITAL TRANSMITTER terminal
[Note]
The included AC power supply cords are for use with this unit only. Do
not use them with other equipment.
AC power supply cords
Connect both AC power supply cords to enjoy all the features of
this system.
Demo function
When the unit is first plugged in, a demonstration of its functions
may be shown on the display.
If the demo setting is off, you can show a demonstration by
selecting “DEMO ON” in the standby mode.
Press and hold [–DEMO] on the main unit (l 14).
The display changes each time you press and hold the button.
DEMO OFF()DEMO ON
While in the standby mode, select “DEMO OFF” to reduce power
consumption.
RQT7921
9
RQT7921-P_ENG.book
10 ページ
2005年5月25日 水曜日 午後3時24分
Conserving power
The system consumes a small amount of power, even when it is
turned off. The amount of power used depends on the display setting
(l 38):
BRIGHT: 3.7 W
DIM: 3.4 W
OFF: 1.9 W
To save power when the unit is not to be used for a long time, unplug it
from the household AC outlet.
You will need to reset some memory items after plugging the unit.
∫ Optional FM antenna connection
Use FM outdoor antenna if radio reception is poor.
≥Disconnect the outdoor antenna when the unit is not in use.
≥Do not use the outdoor antenna during an electrical storm.
Before unplugging the AC power supply cords
1 Press [Í] to turn off the unit.
2 After “BYE” on the display disappears, unplug the AC power
supply cords.
LOOP
ANT
GND
RF IN
75
FM
ANT
LOOP
AM
ANT
RF OU
EXT
FM outdoor antenna
(Using a television antenna)
≥Disconnect the FM indoor antenna.
≥The antenna should be installed by a competent technician.
Rework your outdoor antenna’s 75 ≠ coaxial cable as follows.
75 ≠ coaxial cable
(not included)
Antenna plug
(not included)
For example; Panasonic Antenna plug (K2RC021B0001,
not included)
1 Remove a piece of the outer vinyl insulator.
10 mm (13/32z)
10 mm (13/32z)
Peel back
7 mm (9/32z)
2 Carefully pull the tabs apart to remove the cover.
2
1
1
3 Install the coaxial cable.
Clamp the cable conductor, and wind it on so that it does
not contact anything else.
Clamp with pliers
4 Attach the cover.
RQT7921
10
RQT7921-P_ENG.book
11 ページ
2005年5月25日 水曜日 午後3時24分
\
7
STEP
TV
INPUT SELECTOR
DVD/VHS FM/AM
DVD
VHS
TV
1
2
3
4
5
6
8
9
TUNER
DVD/VHS
VHS
The unit determines the type of transmission, TV or CATV, as follows:
TV: when there are less than 5 CATV channels.
CATV: when there are 5 or more CATV channels.
CH
PICTURE MODE
7
Preparation
≥Confirm that the antenna is connected correctly.
≥Turn on the television and select the video input for the VHS.
≥Press [VHS] to put the remote control in VHS mode.
VOLUME
ENTER
SETUP
S10
0
DISC
SLOW/SEARCH
SKIP
JET REW
OPEN/CLOSE/EJECT
Press [Í] to turn on the unit.
Plug-in Auto Tuning starts and the unit puts the stations it can receive
into channels (l 37, Channel range).
MENU
TOP MENU
Plug-in Auto Tuning
After plugging the unit into your household AC outlet and pressing [Í]
to turn the unit on for the first time, the unit automatically tunes in all
the channels it can receive and sets the clock.
MENU
NAVI
DIRECT
NAVIGATOR
PLAY
LIST
ENTER
2
STATUS/
FUNCTIONS
POWER
/I
RETURN
AUTO CHANNEL SET
CH
PROCEEDING
OPEN/CLOSE
END
EJECT
DISC CHECK
/REW
H.BASS
STOP
:MENU
VOLUME
FF/
REC
STOP
PLAY
PLAY
CH
-DEMO
PHONES
DOWN
UP
The unit starts auto clock setting when finished, then displays the time.
[Note]
6
STEP
The remote control
Batteries
Remote control
If auto tuning stops partway (by changing the source, turning the unit
off, or due to a power failure).
1 Disconnect the AC power supply cord on the main unit and then
reconnect it.
2 Turn on the main unit.
To cancel partway
Press [MENU].
∫ To start Plug-in Auto Tuning again (after relocation, for
example)
∫ Batteries
≥Insert so the poles (i and
j) match those in the
remote control.
≥Do not use rechargeable
type batteries.
2
1
Preparation
≥Press [Í] to turn on the unit.
≥Make sure there is no video cassette tape loaded in the unit.
≥Press [DVD/VHS] to select “VHS” as the source.
1 Press and hold [W CH] and [X CH] on the main unit simultaneously
for 3 seconds until the channel changes to “2”.
3
R6/LR6, AA, UM-3
Do not:
≥mix old and new batteries.
≥use different types at the same time.
≥heat or expose to flame.
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese batteries.
≥use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long period
of time. Store in a cool, dark place.
Disappears
2
2 Disconnect the AC power supply cord on the main unit and then
reconnect it.
3 Turn on the main unit. Plug-in Auto Tuning restarts.
Antenna system and channel captions all revert to the default
values when you perform the procedure above. Reset the timer
recording settings. (If necessary reset the clock first. l 36,
CLOCK SET)
∫ To set the channels manually (l 37).
∫ If the unit couldn’t set the clock automatically
The MANUAL CLOCK SET screen appears. Set the time manually
(l 36).
∫ Use
Aim at the sensor (l 14), avoiding obstacles at a maximum range of 7
m (23 feet) directly in front of the unit.
RQT7921
11
RQT7921-P_ENG.book
12 ページ
2005年5月25日 水曜日 午後3時24分
∫ TV operation
TV
TV
DVD
Switch the remote control mode to TV. Press [TV] before doing TV
operations. When in TV mode, the [TV] button lights each time you
press an operation button.
INPUT SELECTOR
DVD/VHS FM/AM
TV
VHS
DVD/VHS
TUNER
STEP8, 2
TV
DVD
1
2
3
4
5
6
8
9
CH
CH
STEP8, 2
Numbered
buttons
PICTURE MODE
7
VOLUME
ENTER
SETUP
S10
0
DISC
SETUP
CH
Operation
Buttons
Remote control
TV mode
[TV]
Power on/
standby
[ÍTV]
TV/Video switch
[TV/VIDEO]
Selecting
channels
[W CH], [X CH] or numbered buttons
[1–9, 0, S10/ENTER].
≥[S10/ENTER] is used to confirm channel
selection on some televisions manufactured by
other companies.
Adjusting
volume
[TV VOLj] [TV VOLi]
SLOW/SEARCH
SKIP
JET REW
OPEN/CLOSE/EJECT
MENU
TOP MENU
NAVI
DIRECT
NAVIGATOR
PLAY
LIST
ENTER
ENTER
STATUS/
FUNCTIONS
RETURN
TV VOL
TV VOL
TV VOL
RETURN
TV VOL
MULTI RE-MASTER MIX 2CH PROGRESSIVE REPEAT
QUICK OSD
ZOOM
CD MODE PLAY MODE
STEP
H.BASS C.FOCUS
TEST
CH SELECT
SUBWOOFER LEVEL SFC
SUPER SRND MUTING
ADVANCE
CM SKIP DISC REVIEW
PROG
SPEED
SHIFT
SLEEP
PL
SHIFT
STEP
QUICK
REPLAY
AUDIO
CANCEL
TV/VIDEO
8 TV manufacturer setting
Refer the following chart for the code
for your television.
Manufacturer
Code No.
Manufacturer
Code No.
Panasonic
01, 02
PHILIPS
06
FISHER
14
PIONEER
02, 10, 19
G.E.
02, 03, 07, 09
QUASAR
02
GOLD STAR
07, 15
RCA
03, 07, 09, 13,
23, 24, 25
HITACHI
05, 07
SANYO
14
JVC
12
SHARP
08, 21
LXI
03, 06, 07, 10,
14, 15
SONY
04
MAGNAVOX
06, 07, 11, 15,
22
SYLVANIA
06, 07, 15
MITSUBISHI
07, 15, 16, 21
SYMPHONIC
17
NEC
07, 15
TOSHIBA
10, 21
PHILCO
06, 07
ZENITH
18, 20
2
≥Example: To select 01, press [0] l [1].
≥The remote control outputs the on/off signal. If the code is
correct, the equipment turns on or off. If it doesn’t, try entering
another code.
[Note]
≥If your television brand is not listed or if the code listed for your
television does not allow control of your television, this remote
control is not compatible with your television.
≥Re-enter the codes after you change the batteries.
12
≥Menu Language (l 27)
≥TV Type (l 26)
≥TV Aspect (l 26)
1
Press [DVD] to put the remote control
in DVD mode.
2
3
Press [Í] to turn on the unit.
4
Press [SHIFT]i[SETUP] to show
QUICK SETUP screen.
Press [DVD/VHS] to select “DVD/CD” as
the source.
Setup
QUICK SETUP
Select the menu language.
English
Français
Español
to select and press ENTER
RETURN
to return
5
Follow the messages and make the
settings using [3 4 2 1] and
[ENTER].
6
7
Press [ENTER] to finish QUICK SETUP.
Aiming the remote control at the television
While pressing and holding [TV], press
the numbered buttons to enter the code
number.
RQT7921
DVD QUICK SETUP
The QUICK SETUP screen assists you to make necessary
settings such as:
REC
RESET
TV/VIDEO
You can control the television by entering the remote control code.
1
9
Turn on the television and select the video input for the DVD.
Press [SHIFT]i[SETUP] to exit.
To change these settings later
Select “QUICK SETUP” in “Others” tab (l 27).
To return to the previous screen
Press [RETURN].
RQT7921-P_ENG.book
13 ページ
2005年5月25日 水曜日 午後3時24分
Control reference guide
≥See reference pages in brackets.
Remote control
TV Power button (12)
TV
INPUT SELECTOR
DVD/VHS FM/AM
Turn the unit on (11, 12)
Select television channels and title number etc.
Enter numbers (17)
Picture mode button (29)
DVD
VHS
TV
1
2
3
4
5
6
TUNER
Basic operations for play
Play button (16, 28), Stop button (17, 28)
Open/close button (17), Tape eject button (28)
Pause button (17, 28), Press and hold for slow (28)
7
VOLUME
9
8
Status button (35)
Function button (24)
TV volume down button (12)
Remote control mode selector button
[DVD] (12), [VHS] (28), [TV] (12), [TUNER] (40)
Changes the remote control mode. The button lights
once pressed. The selected mode is held in memory
until you press another mode selector button. The mode
selector button lights each time you press an operational
control button showing which mode is in use.
S10
0
DISC
Channel select (12, 30, 40)
Tracking, and vertical hold buttons (29)
ENTER
SETUP
Volume buttons (16)
SLOW/SEARCH
SKIP
JET REW
OPEN/CLOSE/EJECT
Basic operations for play
Skip buttons (17), Index search button (35)
Slow/search buttons (17), Jet rewind button (28)
Fast-forward/rewind button (28), Tuning buttons (40)
MENU
TOP MENU
Top menu button (22)
Direct navigator button (23)
Jet navigator button (34)
Switch the source on the main unit to tuner and
change the band.
Tuner/band button (40)
CH
PICTURE MODE
DVD SETUP menu button (12, 26)
Disc buttons (17)
Switch the source on the main unit between DVD
and VHS.
DVD/VHS source button (12)
Menu button (22, 36), Play list button (23)
NAVI
PLAY
LIST
DIRECT
NAVIGATOR
Selection/Enter on the television’s screen
ENTER
STATUS/
FUNCTIONS
RETURN
TV VOL
TV VOL
Return button (17), TV volume up button (12)
MULTI RE-MASTER MIX 2CH PROGRESSIVE REPEAT
QUICK OSD
ZOOM
CD MODE PLAY MODE
H.BASS C.FOCUS
TEST
CH SELECT
SUBWOOFER LEVEL SFC
SUPER SRND MUTING
ADVANCE
CM SKIP DISC REVIEW
PROG
SPEED
To use functions labelled in orange
While pressing [SHIFT], press the
corresponding button
MULTI RE-MASTER....(21)
QUICK OSD .........(18)
H.BASS............(42)
SUBWOOFER LEVEL ....(42)
SHIFT
SLEEP
PL
QUICK
REPLAY
REC
AUDIO
CANCEL
RESET
TV/VIDEO
MIX 2CH ........... (42) PROGRESSIVE......(17)
CD MODE ..........(18)
ZOOM............. (19)
REPEAT .......... (19)
PLAY MODE.. (20, 40)
C.FOCUS ........... (41)
SFC.............. (41)
TEST .............(41)
SUPER SRND........(41)
CH SELECT ....... (41)
MUTING.......... (42)
ADVANCE
CM SKIP............(18) DISC REVIEW ....... (18)
PROG .............(32)
SPEED ............ (32)
QUICK
REPLAY ..........(18)
...............(32)
REC ............ (30)
SLEEP............. (42)
PL Ⅱ.......... (41)
AUDIO ......(19, 39)
CANCEL ............(17)
RESET .......... (35)
TV/VIDEO ........ (12)
≥Intervals between buttons are changed.
RQT7921
13
RQT7921-P_ENG.book
14 ページ
2005年5月25日 水曜日 午後3時24分
Main unit and subwoofer
Power button [Í/I POWER] l 11; Press to switch the unit from on to standby mode or vice versa.
In standby mode, the unit is still consuming a small amount of power.
Drawer open/close button l 16
Disc change button l 16
Disc check button l 16
Tape slot l 28
Disc buttons
[DISC1–5] l 16
Fast-forward and
rewind buttons l 28
Recording button l 30
OPEN/CLOSE
Drawer l 16
EJECT
Tape eject button l 28
DISC CHECK
/REW
H.BASS
VOLUME
FF/
REC
STOP
STOP
PLAY
Volume dial l 16
PLAY
CH
-DEMO
PHONES
DOWN
UP
Channel buttons l 11
Input selector button
VHS>DVD/CD>FM>AM
^"""""""""""""n
H. Bass
button l 42
DVD stop button l 16
DVD play button l 16
Demo button l 9
[Note]
≥“BYE” is displayed when the unit turns off.
Remove the power plug after this display
disappears.
VHS stop button l 28
VHS play button l 28
Remote control
signal sensor
Display
Headphone terminal l 42
AC supply indicator [AC IN]
≥This indicator lights when the subwoofer is connected to the
household AC outlet and through the system cable to the main unit.
≥When main unit is turned on, this indicator will light on or vice versa.
≥The indicator light turns off in approximately 10 seconds after the
unit is disconnected from the AC outlet.
Main unit display
[1]
1 2 3 4 [1] 5 6 7
MONO
ST CD
TUNED
TG PL CT PG
PGM
DTS
8 9 [2] [3]1 2 3 4 [4] [5] [6] [7] [8]
DIGITAL ALL HDCD H.BASS
PROG. D.MIX RND A B
C.F
PL II
SFC
5
SLEEP SP EP VP
S.SRND LP
dB w REC
CH
[2]
:
[9]
∫ Common display
[1] Program indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 40
[2] H. Bass indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
[3] Wireless Theater indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
≥Indicates when you use the Digital Transmitter and Receiver.
[4] Center Focus indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
[5] Sound Field Control indicator . . . . . . . . . . . . . . . . . . . . . . . . 41
[6] Dolby Pro Logic II indicator . . . . . . . . . . . . . . . . . . . . . . . . . 41
[7] Super Surround indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
[8] SLEEP timer indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
[9] Main display (Orange)
Disc play elapsed time, program recording start time, volume,
TUNER frequency/channel display, various messages, etc.
[10] Main display (White)
Time display, video play/record elapsed time, program recording
end time, various messages, etc.
∫ DVD operation
RQT7921
14
1 CD mode indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Lights when CD mode is on.
2 DVD selector indicator
Lights when DVD is selected.
3 Operation status of DVD section
≥Displays play status graphically.
Rotating: playing
Stopped: paused
Blinking: Standby to resume play (l 17, Stop)
≥Numeric indicator lights corresponding to disc tray number.
4 DTS indicator
5 Progressive video indicator. . . . . . . . . . . . . . . . . . . . . . . . . . 17
6 Dolby Digital indicator
6
7
[10]
7 Down mix indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
8 HDCD indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
9 Play sequence indicator
CD mode indicator + RND: During all disc random play. . . . . 21
RND: During random play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
: During repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
A
B: During A-B repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
: Title/Group/Playlist/Chapter/Track/Program display
∫ VHS operation
1 VHS selector indicator
Lights when the selector is in VHS mode.
2 Operation status of VHS section
≥Lights when a video cassette is inserted.
≥Blinks when recording or timer recording is attempted with no
video cassette inserted.
≥Displays play status graphically.
Rotating: playing
Stopped: paused
3 Recording indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
4 Repeat playback indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
5 Tape speed indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
6 Timer program recording indicator. . . . . . . . . . . . . . . . . . . . 32
7 Channel display
∫ Tuner operation
[1] Radio broadcast display . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
MONO: Forced monaural
ST: Stereo
TUNED: Receiving radio signal
[2] Band display
RQT7921-P_ENG.book
15 ページ
2005年5月25日 水曜日 午後3時24分
Discs that can be played
Logo
Disc
Indication in
operating
instructions
Remarks
[RAM]
Recorded using Version 1.1 of the
Video Recording Format (a unified
video recording standard).
≥Recorded with DVD video recorders, DVD
video cameras, personal computers, etc.
≥Remove discs from their cartridges before use.
[JPEG]
Recorded using the DCF (Design
rule for Camera File system)
standard Ver 1.0.
≥Recorded with Panasonic DVD-Video recorders.
≥To play JPEG files, select “Play as Data
Disc” in Other Menu (l 25).
[DVD-A]
—
[DVD-V]
Some DVD-Audio discs contain DVD-Video content.
To play DVD-Video content, select “Play as DVD-Video” in Other Menu (l 25).
DVD-RAM
DVD-Audio
DVD-Video
DVD-R
(DVD-Video)/
DVD-RW
(DVD-Video)
—
—
[DVD-V]
Discs recorded and finalized§ on DVD video recorders or DVD video cameras.
iR (Video)/
iRW (Video)
Video CD
—
[VCD]
—
SVCD
Conforming to IEC62107
CD
This unit is compatible with HDCD, but does not support the Peak Extend function.
(A function which expands the dynamic range of high level signals)
HDCD-encoded CDs sound better because they are encoded with 20 bits, as
compared with 16 bits for all other CDs.
≥During HDCD play, “HDCD” lights on the unit’s display.
[CD]
CD-R
CD-RW
[WMA]
[MP3]
[JPEG]
[CD]
[VCD]
≥This unit can play CD-R/RW (audio recording disc) recorded with the formats on the
left. Close the sessions or finalize§ the disc after recording.
≥HighMATTM discs
WMA, MP3 or JPEG files only.
To play without using the HighMATTM function, select “Play as Data Disc” in Other
Menu (l 25).
≥[WMA] This unit is not compatible with Multiple Bit Rate (MBR: a file that contains the
same content encoded at several different bit rates).
§A process that allows play on compatible equipment.
≥It may not be possible to play the above discs in all cases due to the type of disc or condition of the recording.
Note about using a DualDisc
The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital Audio (CD-DA) format so play
may not be possible.
∫ Discs that cannot be played
PAL discs (except DVD-Audio), DVD-ROM, CD-ROM, CDV, CD-G,
SACD, Divx Video Discs and Photo CD, DVD-RAM that cannot be
removed from their cartridge, 2.6-GB and 5.2-GB DVD-RAM, and
“Chaoji VCD” available on the market including CVD, DVCD and
SVCD that do not conform to IEC62107.
HighMAT and the HighMAT logo are either
trademarks or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
Disc handling
∫ To prevent damage
Do not;
≥load more than one disc per tray.
≥close the drawer by hand.
∫ To clean discs
Wipe with a damp cloth and
then wipe dry.
∫ Handling precautions
, HDCD®, High Definition Compatible Digital® and
Pacific Microsonics™ are either registered trademarks or
trademarks of Pacific Microsonics, Inc. in the United States and/or
other countries.
HDCD system manufactured under license from Pacific
Microsonics, Inc. This product is covered by one or more of the
following: In the USA : 5,479,168, 5,638,074, 5,640,161,
5,808,574, 5,838,274, 5,854,600, 5,864,311, 5,872,531, and in
Australia: 669114, with other patents pending.
≥Do not attach labels or stickers to discs (This may cause disc
warping, rendering it unusable).
≥Do not write on the label side with a ball-point pen or other writing
instrument.
≥Do not use record cleaning sprays, benzine, thinner, static electricity
prevention liquids or any other solvent.
≥Do not use scratch-proof protectors or covers.
≥Do not use the following discs:
– Discs with exposed adhesive from removed stickers or labels
(rented discs etc).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart shapes.
RQT7921
15
RQT7921-P_ENG.book
16 ページ
2005年5月25日 水曜日 午後3時24分
Basic play
Turn on the television and select the appropriate video input for the DVD.
1
2
3
4
Put the remote
control in DVD
mode.
DVD
5
Turn on the unit.
POWER
Open the disc tray
and load the disc.
OPEN/CLOSE
≥Load double-sided discs so the label for the
side you want to play is facing up.
Í I
Select “DVD/CD”.
INPUT SELECTOR
Select the disc tray.
6
OPEN/CLOSE
Close the disc tray.
≥To load discs on the other trays,
repeat steps 4–6.
DISC
3
VHS
2
1
4
TV
TV
1
2
3
4
5
6
2
3
4
3
INPUT SELECTOR
DVD/VHS FM/AM
DVD
1
TUNER
5
DISC CHANGE DISC CHECK
CH
PICTURE MODE
VOLUME
7
9
8
8
7
ENTER
SETUP
S10
0
DISC
SLOW/SEARCH
SKIP
JET REW
OPEN/CLOSE/EJECT
MENU
TOP MENU
OPEN/CLOSE
EJECT
DISC CHECK
/REW
H.BASS
VOLUME
FF/
REC
STOP
PLAY
STOP
PLAY
CH
NAVI
-DEMO
PHONES
DOWN
UP
PLAY
LIST
DIRECT
NAVIGATOR
ENTER
5,6
STATUS/
FUNCTIONS
RETURN
TV VOL
TV VOL
MULTI RE-MASTER MIX 2CH PROGRESSIVE REPEAT
ZOOM
CD MODE PLAY MODE
QUICK OSD
STOP
H.BASS C.FOCUS
TEST
CH SELECT
SUBWOOFER LEVEL SFC
SUPER SRND MUTING
ADVANCE
CM SKIP DISC REVIEW
PROG
SPEED
SHIFT
SLEEP
PL
QUICK
REPLAY
AUDIO
CANCEL
REC
RESET
TV/VIDEO
7
8
Start play.
VOLUME
Adjust the volume.
––dB N 0dB
DOWN
UP
(Minimum) (Maximum)
Volume may be lower when playing
DVD-Video than when playing other discs or during
television broadcasts. Reduce the volume before playing
other sources or returning to the television so volume
doesn’t increase suddenly.
PLAY
≥Press [∫] to stop play.
Using main unit
Checking
the disc
trays
DISC CHECK
You can change the other
discs without interrupting
play.
≥After selecting the disc tray,
press [< DISC CHANGE] to
close the tray.
DISC CHANGE
Changing
the discs
during play
RQT7921
16
All trays except the tray in
play open without interrupting
play. While stopped, all trays
will open.
≥Press [DISC CHECK] again
to close the trays.
≥Do not pull out the trays,
remove or insert discs
during the disc check.
DISC
1
2
3
4
5
[Note]
≥When “Press PLAY to resume play” is displayed, this position is
memorized even after turning off the unit, changing the source.
(Power off resume)
≥Total title number may not be displayed properly on iR/iRW.
If you are experiencing problems, refer to troubleshooting (l 45–
47).
RQT7921-P_ENG.book
17 ページ
2005年5月25日 水曜日 午後3時24分
[Remember] Press [DVD] first.
TV
SKIP
INPUT SELECTOR
DVD/VHS FM/AM
DVD
DVD
Numbered
buttons
VHS
TV
1
2
3
4
5
6
TUNER
Skip
≥[WMA] [MP3] [JPEG]
[3, 4]: Group skip during
play
[2, 1]: Content skip during
play
CH
PICTURE MODE
7
DISC
9
ENTER
S10
0
DISC
SLOW/SEARCH
SKIP
JET REW
OPEN/CLOSE/EJECT
OPEN/CLOSE,
TOP MENU
DIRECT NAVIGATOR
ENTER
VOLUME
8
SETUP
Select
MENU
TOP MENU
NAVI
PLAY
LIST
DIRECT
NAVIGATOR
On-screen
item select
MENU
ENTER
Register
ENTER
ENTER
STATUS/
FUNCTIONS
RETURN
TV VOL
TV VOL
MULTI RE-MASTER MIX 2CH PROGRESSIVE REPEAT
QUICK OSD
ZOOM
CD MODE PLAY MODE
H.BASS C.FOCUS
TEST
CH SELECT
SUBWOOFER LEVEL SFC
SUPER SRND MUTING
ADVANCE
CM SKIP DISC REVIEW
PROG
SPEED
SHIFT
SHIFT
SLEEP
PL
QUICK
REPLAY
AUDIO
CANCEL
RETURN
PROGRESSIVE
REC
RESET
TV/VIDEO
CANCEL
1
2
3
4
5
6
7
8
9
ENTER
0
Enter number
S10
OPEN/CLOSE/EJECT
ENTER
SHIFT
Progressive
video
≥Press [CANCEL] to cancel the
number(s).
CANCEL
i
PROGRESSIVE
CD MODE
TOP MENU
NAVI
Stop
OPEN/CLOSE/EJECT
SHIFT
Open/Close
i
The position is memorized while
“Press PLAY to resume play” is
on the screen.
≥Press [1] (play) to resume.
≥Press [∫] to clear the position.
≥This may not work while playing
some parts of a disc or at all
with some discs (only when the
elapsed play time can be
displayed).
≥Power off resume (l 16)
≥You can open a disc tray even
when the unit is in standby
mode.
DIRECT
NAVIGATOR
RETURN
Return to
previous
screen
Pause
Search
(during play)
SLOW/SEARCH
Slow-motion
(during pause)
Frame-byframe
ENTER
≥Disc information (l 18)
≥You can select the disc with
[DISC1–5] on the main unit.
DISC
≥Up to 5 steps
≥Press [1] (play) to start play.
[RAM] [DVD-V] [VCD]
≥[VCD] Slow motion, forward
direction only
[RAM]
Plays the programs (l 23)
RETURN
OPEN/CLOSE/EJECT
≥Press [1] (play) to restart play.
[DVD-A] [DVD-V]
Shows a disc top menu
[DVD-V]
Shows a disc menu
[RAM]
Shows the play list (l 23)
[VCD]
Shows a disc menu
MENU
Disc menu
[VCD] with playback control (PBC)
To cancel the playback control,
press [∫] and then press the
numbered buttons.
[WMA] [MP3] [JPEG]
e.g. To select 123:
[1] l [2] l [3] l [ENTER]
Using remote control
PROG.
[RAM] [DVD-A]
[DVD-V] [VCD] [CD]
e.g. To select 12:
[S10] l [1] l [2]
Selecting the
disc directly
i
1
2
4
5
3
[Note]
≥Discs continue to rotate while menus are displayed. Press [∫] when
you finish to preserve the unit’s motor and your television screen.
[DVD-A] (Motion picture part)
[RAM] [DVD-V] [VCD]
≥[VCD] forward direction only
(during pause)
RQT7921
17
RQT7921-P_ENG.book
18 ページ
2005年5月25日 水曜日 午後3時24分
Convenient functions
TV
PROGRESSIVE
CD MODE
INPUT SELECTOR
DVD/VHS FM/AM
DVD
DVD
Numbered
buttons [1] [5]
TV
VHS
1
2
3
4
5
6
[VCD] [CD] [WMA] [MP3]
This feature is very convenient if you want to play several music CDs
sequentially. Make sure that applicable discs are on the tray before
playing. (l Disc information, left)
DVD and JPEG files are skipped without being played.
TUNER
CH
PICTURE MODE
7
VOLUME
9
8
ENTER
SETUP
DISC
S10
0
DISC
JET REW
OPEN/CLOSE/EJECT
NAVI
DIRECT
NAVIGATOR
PLAY
LIST
ENTER
STATUS/
FUNCTIONS
RETURN
TV VOL
TV VOL
MULTI RE-MASTER MIX 2CH PROGRESSIVE REPEAT
ZOOM
QUICK OSD
CD MODE PLAY MODE
REPEAT
CD MODE
H.BASS C.FOCUS
TEST
CH SELECT
SUBWOOFER LEVEL SFC
SUPER SRND MUTING
ADVANCE
CM SKIP DISC REVIEW
PROG
SPEED
CM SKIP
ADVANCE
DISC REVIEW
SHIFT
SLEEP
PL
SHIFT
While stopped
2
Press [CD MODE].
Press [1] (play).
QUICK
REPLAY
AUDIO
CANCEL
QUICK
REPLAY
REC
RESET
TV/VIDEO
CD
≥If all loaded discs are DVD, JPEG, or unchecked, CD Mode does not
work.
≥HighMATTM menus and Video CD playback control are disabled.
≥You cannot change the mode during program play, random play or
CD mode play. (l 20)
≥If you want to play a DVD, press [CD MODE] again to cancel CD
Mode. (CD Mode is also canceled when you switch the unit to
standby.)
≥If no disc is loaded in the player, CD Mode will not function.
MENU
TOP MENU
QUICK OSD
ZOOM
1
SLOW/SEARCH
SKIP
CD Mode
(CD sequential play)
QUICK REPLAY
Quick replay
AUDIO
(Only when the elapsed play time can be displayed)
(Except iR/iRW)
SETUP
Press [QUICK REPLAY] to skip back a few
seconds.
Disc information
DISC
You can select the disc after checking the discs loaded with the Disc
information screen.
≥You can also select the disc directly with 5 DISC SELECTOR
buttons on the main unit.
1
Press [DISC] to show the Disc
information screen.
Track 10
Time 60:15
DVD-Audio
1
Unchecked
No Disc
Empty
2
Program
≥You can not select a tray with no disc.
Displaying current playback
condition (QUICK OSD)
Press [1] (play) when you find a title/
program to play.
≥This may not work depending on the disc and the play condition.
PROG
The current playback condition screen is displayed.
Current playback number Elapsed play time
e.g. [DVD-V]
Chapter
4
Time
0:41:23
Playback
condition
Skipping one minute forward
(CM skip)
[RAM] [DVD-V] (Except iR/iRW)
Play restarts from approximately a minute later. Convenient when you
want to skip commercials etc.
During play
Press [CM SKIP].
Program Playback
Play mode
18
0:01:06
04
CM SKIP
Press [QUICK OSD].
RQT7921
Time
≥Quick OSD screen is displayed
2
1
4
Not yet read
To clear the screen
Press [DISC].
Title
Press [ADVANCE DISC REVIEW].
e.g. [RAM]
Press the numbered buttons ([1] – [5]).
MULTI RE-MASTER
QUICK OSD
Reviewing title to play
(Advanced Disc Review)
[RAM] [DVD-V] (Except iR/iRW)
Allows you to browse the disc contents and start playing from the
selected position. You can select either “Intro Mode” or “Interval Mode”
in “Advanced Disc Review” in the “Disc” tab (l 26).
Disc Information
DVD-Video
CD
ADVANCE
DISC REVIEW
SPEED
Current position
≥To exit the screen
Press [QUICK OSD].
≥[CD] [MP3] [WMA] Quick OSD screen will appear automatically.
≥If there is a JPEG data in the disc, Quick OSD screen will not appear
automatically.
[RAM]
≥It is not possible to skip the program if the start of the next program is
within about one minute of the point you skipped from.
RQT7921-P_ENG.book
19 ページ
2005年5月25日 水曜日 午後3時24分
[Remember] Press [DVD] first.
MIX 2CH
ZOOM
Changing the zoom ratio
(Zoom)
SHIFT
[DVD-A] (Motion picture part) [RAM] [DVD-V] [VCD]
REPEAT
r PLAY MODE
Repeat play
Expands the letterbox picture to fit the screen.
(Only when the elapsed play time can be displayed
[JPEG]: Works with all JPEG content.)
Press [ZOOM] several times to select the
preset aspect ratio (Just Fit Zoom) or
“Auto”.
Press [SHIFT]i[REPEAT] several times to
select an item to be repeated.
During play
e.g. [DVD-V]
Functions
Just Fit Zoom
1.00
Auto
4:3 Standard
European Vista
16:9 Standard
American Vista
Cinemascope1
Cinemascope2
Functions
Repeat
Off
Off
Chapter
Title
[RAM] PG (Program)>Disc>Off
≥During play list play: Scene>PL (Playlist)>Off
[DVD-A] Track>Group§>Off
[DVD-V] Chapter>Title§>Off
16:9 Standard (16:9)
4:3 Standard (4:3)
[VCD] [CD] Track>Disc>Off
≥When CD Mode is on: Track>Disc>All CD’s>Off
≥When CD Mode is on, during program and random play:
Track>All CD’s>Off
[WMA] [MP3] Content>Group§>Off
≥When CD Mode is on: Content>Group>All CD’s>Off
≥When CD Mode is on, during program and random play:
Content>All CD’s>Off
European Vista (1.66:1)
American Vista (1.85:1)
Cinemascope1 (2.35:1)
Cinemascope2 (2.55:1)
[JPEG] Group§>Off
§ “All” is displayed, program and random play.
Fine adjustments (Manual Zoom)
After selecting the preset aspect ratio or “Auto”, press [2 1].
–from k1.00 to k1.60 (in 0.01 units)
–from k1.60 to k2.00 (in 0.02 units)
≥Press and hold [2 1] to alter faster.
SHIFT
r
AUDIO
CANCEL
Changing soundtracks
(Audio)
[DVD-A] [DVD-V] (with multiple soundtracks) [RAM] [VCD]
Changes the soundtrack.
Press [SHIFT]i[AUDIO] several times to
select the soundtrack.
Functions
Audio
1
[RAM] [VCD]
You can use this button to select “L”, “R” or “LR”.
[DVD-V] (Karaoke discs)
Press [2 1] to select “On” or “Off” of vocals.
Read the discs instructions for details.
Signal type/data
LPCM/PPCM/ÎDigital/DTS/MPEG: Signal type
kHz (Sampling frequency)/bit/ch (Number of channels)
Example:
3/2 .1ch
.1: Low frequency effect
.1: (not displayed if there is no signal)
.0: No surround
.1: Mono surround
.2: Stereo surround (left/right)
.1: Center
.2: Front leftiFront right
.3: Front leftiFront rightiCenter
RQT7921
19
RQT7921-P_ENG.book
20 ページ
2005年5月25日 水曜日 午後3時24分
Convenient functions
TV
∫ Program play (up to 32 items)
INPUT SELECTOR
DVD/VHS FM/AM
DVD
VHS
TV
1
2
3
4
5
6
∫ When CD Mode is off (l 18)
[DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
TUNER
DVD
Numbered
buttons
2
CH
PICTURE MODE
7
VOLUME
8
9
ENTER
SETUP
S10
0
DISC
Press the numbered buttons to select a
group or title ([WMA] [MP3] [JPEG] then press
[ENTER]).
e.g. [DVD-V]
SLOW/SEARCH
SKIP
Program Playback
Choose a title and chapter.
No.
JET REW
OPEN/CLOSE/EJECT
Disc
T/G
C/T
Play
1
Clear
MENU
TOP MENU
Clear all
NAVI
DIRECT
NAVIGATOR
PLAY
LIST
to select and press
ENTER
ENTER
MULTI
RE-MASTER
STATUS/
FUNCTIONS
RETURN
TV VOL
TV VOL
ADVANCE
CM SKIP DISC REVIEW
PROG
SPEED
SHIFT
SHIFT
SLEEP
PL
QUICK
REPLAY
AUDIO
CANCEL
PLAY MODE
3
REC
RESET
TV/VIDEO
PLAY
to start
≥To select a 2-digit number
e.g. 23:[S10] l [2] l [3]
[WMA] [MP3] [JPEG] [2] l [3] l [ENTER]
≥[VCD] [CD] This step is unnecessary.
MULTI RE-MASTER MIX 2CH PROGRESSIVE REPEAT
ZOOM
CD MODE PLAY MODE
QUICK OSD
H.BASS C.FOCUS
TEST
CH SELECT
SUBWOOFER LEVEL SFC
SUPER SRND MUTING
ENTER
CANCEL
Press the numbered buttons to select a
chapter or track ([WMA] [MP3] [JPEG] then press
[ENTER]).
MONO
Disc No.
ST
CD
PGM
DIGITAL
ALL
DTS
PROG.
D.MIX
HDCD
RND
H.BASS
A
B
TUNED
TG
PL
CT
PG
dB
w
REC
CH
REPEAT
PLAY MODE
1
Program/Random play
While stopped, press [PLAY MODE].
Each time you press [PLAY MODE] while
stopped:
Program__--_--__--__--__--__--) Random
^------------------------ off (Normal play) (____}
∫ Program play
When CD Mode is off
[DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
You can program all the items on a disc in the play position.
e.g. [CD]
≥Repeat steps 2 and 3 to program other items.
4
When CD Mode is on
[VCD] [CD] [WMA] [MP3]
You can play all the items on all the discs in random order.
To exit
Press [PLAY MODE] several times while stopped.
[Note]
≥The program is cleared when you switch the unit to standby, select
another source, or move the disc out of the play position.
≥[DVD-A]
Some discs contain bonus groups. If a password screen appears
after selecting a group, enter the password with the numbered
buttons to play the bonus group. Refer also to the disc’s jacket.
RQT7921
20
Press [1] (play).
∫ When CD Mode is on (l 18)
[VCD] [CD] [WMA] [MP3]
2
Press the numbered buttons to select a
disc.
3
Press the numbered buttons to select
the items ([WMA] [MP3] then press [ENTER]).
When CD Mode is on
[VCD] [CD] [WMA] [MP3]
You can program all the items on all the discs.
∫ Random play
When CD Mode is off
[VCD] [CD]
You can play all the items on a disc in the play position in random
order.
[DVD-A] [DVD-V] [WMA] [MP3] [JPEG]
You can play selected item on a disc in the play position in random
order.
Track No. Program No.
≥To select a 2-digit number
e.g. 23:[S10] l [2] l [3]
[WMA] [MP3] [2] l [3] l [ENTER]
≥Repeat steps 2 and 3 to program other items.
4
Press [1] (play).
RQT7921-P_ENG.book
21 ページ
2005年5月25日 水曜日 午後3時24分
[Remember] Press [DVD] first.
To select an item using the cursor buttons
Press [ENTER] and [3 4] to select an item, then press [ENTER]
again to register.
To change the selected program
1 Press [3 4] to select an item.
2 Repeat step 2 and 3.
To clear the selected item,
1 Press [3 4] to select an item.
2 Press [CANCEL] (or press [3 4 2 1] to select “Clear” and press
[ENTER]).
To clear the whole program
Select “Clear all” with [3 4 2 1] and press [ENTER]. The whole
program is also cleared when the disc is moved out of the play
position, the unit is turned off or another source is selected.
∫ When CD Mode is off (l 18)
MULTI RE-MASTER
r QUICK OSD
Multi Re-master
[RAM] [DVD-V] (Discs recorded with 48 kHz only)
[DVD-A] (Discs recorded with 44.1 kHz and 48 kHz only)
[VCD] [CD]
≥During 2ch output of these discs, this feature gives you a more
natural sound by adding the higher frequency signals not recorded
on the disc, for example, playing DVD-Video recorded with 48 kHz at
96 kHz. (Sampling frequency l below)
≥During multi-channel output of these discs, this feature reproduces
the frequencies lost during recording to give you a sound closer to
the original.
[WMA] [MP3] (Disc recording is other than 8 kHz, 16 kHz, 32 kHz)
This feature reproduces the higher frequencies lost during recording to
give you a sound closer to the original.
1
∫ Random play
Press [SHIFT]i[MULTI RE-MASTER]
several times to select “1” “2” or “3”.
Functions
[DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
2
SHIFT
Multi Re-master 1
Press the numbered buttons to select a
group or a title.
Off
1
2
3
Output sampling frequency
e.g. [DVD-V]
Random
Press Playback
PLAY to start
Choose a title.
Title 1
0 ~ 9 to select
PLAY to start
≥[VCD] [CD] This step is unnecessary.
[DVD-A]
≥To enter all groups, press [2 1] to select “All” and press
[ENTER].
≥To deselect a group, press the numbered buttons
corresponding to the group you want to clear.
3
Press [1] (play).
∫ When CD Mode is on (l 18)
[VCD] [CD] [WMA] [MP3]
2
Press [1] (play).
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are trademarks of
Dolby Laboratories.
“DTS” and “DTS Digital Surround” are registered trademarks of
Digital Theater Systems, Inc.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and
4,819,098, licensed for limited viewing uses only.
Setting
[DVD-A] [DVD-V] [CD] (LPCM/PPCM)
Type of music
Other discs
Effect level
1
High tempo (e.g., pops and rock)
Light
2
Various tempos (e.g., jazz)
Medium
3
Low tempo (e.g., classical)
Strong
Off
Off
Off
Sampling frequency
Sampling is the process of converting the heights of sound wave
(analog signal) samples taken at set periods into digits (digital
encoding). Sampling frequency is the number of samples taken
per second, so larger numbers mean more faithful reproduction of
the original sound.
Windows Media, and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
WMA is a compression format developed
by Microsoft Corporation. It achieves the
same sound quality as MP3 with a file size
that is smaller than that of MP3.
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
MPEG Layer-3 audio decoding technology licensed from
Fraunhofer IIS and Thomson multimedia.
RQT7921
21
RQT7921-P_ENG.book
22 ページ
2005年5月25日 水曜日 午後3時24分
Using navigation menus
∫ Using the submenu
TV
1
INPUT SELECTOR
DVD/VHS FM/AM
DVD
VHS
TV
1
2
3
4
5
6
8
9
Press [STATUS/FUNCTIONS].
TUNER
DVD
2
PICTURE MODE
7
VOLUME
ENTER
SETUP
S10
0
DISC
SLOW/SEARCH
SKIP
MENU
TOP MENU
MENU
PLAY LIST
NAVI
DIRECT
NAVIGATOR
PLAY
LIST
ENTER
STATUS/
FUNCTIONS
STATUS/
FUNCTIONS
RETURN
TV VOL
TV VOL
ENTER
MULTI RE-MASTER MIX 2CH PROGRESSIVE REPEAT
ZOOM
CD MODE PLAY MODE
QUICK OSD
MENU
To go to next group [WMA] [MP3]
To go to previous group [WMA] [MP3]
All
Audio
Picture
WMA/MP3 and JPEG
WMA/MP3 only
JPEG only
Help display
Find
To switch between guide messages and the
elapsed play time indicator
To search by content or group title (l see below)
1
[WMA] [MP3] [JPEG]
You can play JPEG files on DVD-RAM or play HighMATTM discs
without using the HighMATTM function (Playing HighMATTM discs l 23
“Play as Data Disc” in Other Menu l 25).
∫ Playing items in order (Playback Menu)
1
Next group
Previous group
Highlight a group title to search the group, or content title to search its
content.
Playing data discs
NAVI
Groups and contents
Contents only
Groups only
Thumbnail images [JPEG]
∫ Searching by content or group title
H.BASS C.FOCUS
TEST
CH SELECT
SUBWOOFER LEVEL SFC
SUPER SRND MUTING
TOP MENU
Multi
List
Tree
Thumbnail
JET REW
OPEN/CLOSE/EJECT
TOP MENU
DIRECT
NAVIGATOR
¢ A
2
WMA/MP3/JPEG
All
Total 436
WMA/MP3
Audio
Total 9
JPEG
Picture
Total 427
ENTER
Press [3 4] to select “All”, “Audio” or
“Picture” and press [ENTER].
3
[ENTER].
4
Perfume
001 My favorite1
002 My favorite2
001 Brazilian
002 Chinese
003 Czech
004 Hungarian
005 Japanese
006 Mexican
007 Philippine
008 Swedish
009 Piano
010 Vocal
Group 005/023
Group
2
RQT7921
22
MENU
NAVI
Group and content number
currently playing
: JPEG files
JPEG
001 Lady Starfish
002 Metal Glue
003 Life on Jupiter
004 Starperson
FUNCTIONS to display the sub menu
Press [3 4] to select the content or group and
press [ENTER].
TOP MENU
Press [MENU].
5
Press [1] (cursor) to select “Find” and press
The search result screen appears.
∫ Playing from the selected item
(Navigation menu)
Navigation Menu
002 My favorite2 005 Japanese 001 Lady Starfish
Press [3 4] to select a character and press
[ENTER].
≥To exit the screen
Press [TOP MENU].
1
Find
≥Repeat to enter another characters.
≥Lower case is also searched.
≥Press [6] or [5] to skip between A, E, I, O and U.
≥Press [2] to erase a character.
≥Leave the asterisk (¢) when you search for the titles including the
character you enter.
≥Erase the asterisk (¢) to search for the titles starting with the
character you enter. To add the asterisk (¢) again, display the
submenu again and select “Find”.
Press [TOP MENU].
to select and press
While the submenu is displayed
Press [3, 4] select “Find” (l above) and press
[ENTER].
Playback Menu
2
Press [3 4] to select an item and press
[ENTER].
CH
Numbered
buttons
While the navigation menu is displayed
1
: WMA/MP3
Content 0001/0004
RETURN
to exit
Press [3 4 2 1] to select the group
or audio/picture content and press
[ENTER].
≥To enjoy listening to WMA/MP3 contents while showing a JPEG
image on the screen
Select a JPEG file first, and then select audio contents.
(The opposite order is not effective.)
≥To exit the screen
Press [MENU].
Press
[TOP MENU]
or [MENU].
CD Text
Disc Title:
Disc Artist:
Track Title:
Track Artist:
e.g. CD text
Number currently selected
Content
Displaying CD text
2
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
1/23
2 01
All By Artist
Pink Island
Long John Platinum
SHIPWRECKED
Ashley at Prom
City Penguin
Formura one
Soccer
Baseball
Neanderthal
Cartoons
Trilobites
White Dwarf
Discovery
to select and press ENTER
RETURN
to exit
Press [3 4] to select the track and
press [ENTER].
≥Press [STATUS/FUNCTIONS] to show the playback condition
and current position.
≥To exit the screen
Press [TOP MENU] or [MENU].
RQT7921-P_ENG.book
23 ページ
2005年5月25日 水曜日 午後3時24分
[Remember] Press [DVD] first.
TOP MENU
MENU
Playing HighMATTM discs
NAVI
[WMA] [MP3] [JPEG]
1
2
Press [3 4 2 1] to select the item,
then press [ENTER].
New Playlist Item Long Name Display Te
Menu1
P l ay l i s t 2
2 Prev
P l ay l i s t 1
PAG E 1 / 3
Menu2
Menu3
P l ay l i s t 3
3Return
Next1
Menu:Takes you to the next
menu which shows play
lists or another menu.
Press [DIRECT
NAVIGATOR].
Direct Navigator
2
On
No.
Date
1
2
3
11/ 1(WED)
1/ 1 (MON)
2/ 2 (TUE)
0:05 AM
1:05 AM
2:21 AM
4
5
3/ 3 (WED)
4/10(THU)
3:37 AM
11:05 AM
Title
Contents
Monday feature
Auto action
Cinema
Music
Baseball
9 to select
RETURN
to exit
Press [3 4] or the numbered buttons
to select the program.
≥To select a 2-digit number
e.g. 23: [S10] l [2] l [3]
≥Press [1] (cursor) to show the contents of the program.
≥To exit the screen
Press [DIRECT NAVIGATOR].
Playlist
Playlist 1 - High
Group 1 of Playlist
No.
Content title
1 Few times in summer
2 Less and less
Press [MENU].
Press [2] then
[3 4] to switch
among “Playlist”,
“Group” and “Content” lists.
Press [1] (cursor) then [3 4] to select
an item and press [ENTER].
Group
3
4
5
6
Content
Quatre gymnopedies
You've made me sad
I can't quit him
Evening glory
8 Wheeling spin
9 Velvet Cuppermine
10 Ziggy starfish
9
to select
∫ Playing a play list
And when I was born
7
0
3
1
0
Playlist
2
Playing RAM discs
Play list: Play starts.
∫ Selecting from the list
During play
PLAY
LIST
∫ Playing the programs
≥To change the menu background
Press [STATUS/FUNCTIONS].
The background changes to the one recorded on the disc.
≥To exit the screen
Press [TOP MENU].
1
DIRECT
NAVIGATOR
[RAM]
≥Titles appear only if the titles are recorded on the disc.
≥You cannot edit programs, play lists and disc titles.
Press [TOP MENU].
e.g.
NAVI
ENTER to play
RETURN
to exit
≥To exit the screen
Press [MENU].
(Only when the disc contains a play list)
1
2
Press [PLAY LIST].
Press [3 4] or the
numbered buttons to
select the play list.
≥To select a 2-digit number
e.g. 23: [S10] l [2] l [3]
3
Playlist
0
No.
1
2
Date
11/1
1/ 1
Length
0:00:01
0:01:20
Title
City Penguin
Ashley at Prom
3
2/ 2
1:10:04
Formula one
4
5
3/ 3
4/10
0:10:20
0:00:01
Soccer
Baseball
6
7
4/11
4/ 15
0:00:01
0:01:10
City Penguin
Ashley at Prom
8
9
10
4/ 17
4/ 20
4/22
0:13:22
0:05:30
0:07:29
Formula one
Soccer
Baseball
9 to select and press ENTER
RETURN
to exit
Press [ENTER].
≥To exit the screen
Press [MENU].
Tips for making WMA/MP3 and JPEG discs (For CD-R/CD-RW)
≥Discs must conform to ISO9660 level 1 or 2 (except for extended
formats).
≥This unit is compatible with multi-session but if there are a lot of
sessions it takes more time for play to start. Keep the number of
sessions to a minimum to avoid this.
≥When there are more than 8 groups, the eighth group onwards will
be displayed on one vertical line in the menu screen.
≥There may be differences in the display order on the menu screen
and computer screen.
≥This unit cannot play files recorded using packet write.
e.g. [MP3]
Naming folders and files
root
At the time of recording, prefix folder and
001 group
file names with 3-digit numbers in the
001
order you want to play them (this may not
001 track.mp3
002 track.mp3
work at times).
003 track.mp3
002 group
Files must have the extension:
“.WMA” or “.wma”
“.MP3” or “.mp3”
001 track.mp3
002 track.mp3
003 group
“.JPG”, “.jpg”, “.JPEG” or “.jpeg”
003 track.mp3
004 track.mp3
[WMA]
≥You cannot play WMA files that are copy protected.
≥This unit is not compatible with Multiple Bit Rate (MBR).
[MP3]
≥This unit is not compatible with ID3 tags.
≥Compatible sampling rate: 8, 11.02, 12, 16, 22.05, 24, 32, 44.1 and
48 kHz.
[JPEG]
≥To view JPEG files on this unit:
– Take them on a digital camera that meets the DCF Standard
(Design rule for Camera File system) Version 1.0. Some digital
cameras have functions that are not supported by the DCF
Standard Version 1.0 like automatic picture rotation which may
render a picture un-viewable.
– Do not alter the files in any way or save them under a different
name.
≥This unit cannot display moving pictures, MOTION JPEG and other
such formats, still pictures other than JPEG (e.g. TIFF) or play
pictures with attached audio.
001 track.mp3
002 track.mp3
003 track.mp3
RQT7921
23
RQT7921-P_ENG.book
24 ページ
2005年5月25日 水曜日 午後3時24分
Using On-Screen Menus
Items shown differ depending on the type of disc.
TV
INPUT SELECTOR
Main menus
DVD/VHS FM/AM
DVD
VHS
TV
1
2
3
4
5
6
TUNER
Program
Group
Title
Chapter
Track
Playlist
Content
DVD
CH
Numbered
buttons
PICTURE MODE
7
VOLUME
9
8
ENTER
SETUP
S10
0
DISC
SLOW/SEARCH
SKIP
JET REW
OPEN/CLOSE/EJECT
MENU
TOP MENU
Time
NAVI
DIRECT
NAVIGATOR
PLAY
LIST
ENTER
STATUS/
FUNCTIONS
§
ENTER
STATUS/
FUNCTIONS
RETURN
TV VOL
TV VOL
Except iR/
iRW
RETURN
MULTI RE-MASTER MIX 2CH PROGRESSIVE REPEAT
ZOOM
CD MODE PLAY MODE
QUICK OSD
To start from a specific item
To skip incrementally or decrementally§
(Time Slip for play only)
1 Press [ENTER] twice to show Time Slip
indicator.
2 Press [3 4] to enter the time and press
[ENTER].
≥Press and hold [3 4] to alter faster.
To start from a specific time§ (Time Search)
To change remaining/elapsed time display
(l 19)
H.BASS C.FOCUS
TEST
CH SELECT
SUBWOOFER LEVEL SFC
SUPER SRND MUTING
ADVANCE
CM SKIP DISC REVIEW
PROG
SPEED
SHIFT
SLEEP
PL
QUICK
REPLAY
AUDIO
CANCEL
Audio
To display the current bitrate or sampling
frequency
Still Picture
To switch still picture
Thumbnail
To show thumbnail images
REC
RESET
TV/VIDEO
CANCEL
To display/clear the subtitles
Press [3 4] to select “On” or “Off”.
To display a desired subtitle language
1
Press once.
STATUS/
FUNCTIONS
Subtitle
After selecting the “On”,
Press [3 4] several times to select the desired
subtitle language.
≥On iR/iRW, a subtitle number may be
shown for subtitles that are not displayed.
2
Select the menu.
Select
Go to the
next menu
ENTER
Register
Return to the
previous menu
3
Select
Make the settings.
ENTER
Register
1
2
3
4
5
6
7
8
9
ENTER
0
4
RQT7921
24
RETURN
S10
Press to exit.
Marker (VR)
To recall a marker recorded on DVD-Video
recorders
To recall a marker: [3 4] l [ENTER]
Angle
(with multiple angles)
To select the angle
Rotate Picture
To rotate pictures
Slideshow
To turn on/off slideshow
To change the slideshow timing (0–30 sec)
Other settings
(l 25)
RQT7921-P_ENG.book
25 ページ
2005年5月25日 水曜日 午後3時24分
[Remember] Press [DVD] first.
Other settings
[RAM] [DVD-V]
To change play speed
– from k0.6 to k1.4 (in 0.1 units)
Play Speed
≥After you change the speed
– Output is in stereo.
– Sampling frequency of 96 kHz is converted
to 48 kHz.
∫ Audio Menu
Dolby Pro
Logic II
Dialogue
Enhancer
∫ Play Menu
(Only when the elapsed play time can be displayed
[JPEG]: Works with all JPEG content.)
Repeat
(l 19)
A-B Repeat
Except [JPEG] [RAM] (still picture part)
To repeat a specified section
Press [ENTER] at the starting and ending
points.
Press [ENTER] again to cancel.
Marker
To mark up to 5 positions to play again
Press [ENTER] (The unit is now ready to accept
markers.)
To mark a position: [ENTER] (at the desired
point)
To mark another position: [2 1] l [ENTER]
To recall a marker: [2 1] l [ENTER]
To erase a marker: [2 1] l [CANCEL]
≥This feature doesn’t work during program and
random play.
Advanced
Disc Review
(Reviewing title to play (Advanced Disc Review)
l 18)
∫ Picture Menu
Picture Mode
Normal
Cinema1: Mellows images and enhances
detail in dark scenes.
Cinema2: Sharpens images and enhances
detail in dark scenes.
Animation
Dynamic
User (Press [ENTER] to select “Picture
Adjustment”) (l below)
Picture Adjustment
Contrast
Brightness
Sharpness
Color
Gamma (Adjusts the brightness of dark parts.)
Depth Enhancer
Reduce the rough noise in the background to
give a greater feeling of depth.
Video Output
Mode
Transfer Mode
480i (Interlace) () 480p (Progressive)
If you have chosen “480p” (l above), select the
method of conversion for progressive output to
suit the type of material.
Auto1 (normal): For viewing film material
Auto2: For viewing film material (the same as
Auto1, but able to convert 30-frameper-second progressive video)
Video: For video material
Multi
Re-master
Sound
Enhancement
(l 41)
To make the dialogue in movies easier to
hear
[DVD-V] (Dolby Digital, DTS, MPEG, 3-channel
or over, with the dialogue recorded in the center
channel)
On () Off
(l 21)
Enhances audio output to produce a warm halllike sound. You can enjoy higher quality audio
by adding higher frequency signals not
recorded on the disc.
On () Off
∫ Display Menu
Information
[JPEG]: Off, Date, Details
Subtitle
Position
0 to s60 (in 2 units)
Subtitle
Brightness
Auto, 0 to s7
Auto:
Subtitle gets bright when picture is bright or vice
versa.
Just Fit Zoom
(l 19)
Manual Zoom
(l 19)
Bit Rate
Display
[RAM] [DVD-V] [VCD]
On () Off
GUI Seethrough
Off() On () Auto
^---------------------------------J
Auto:
GUI See-through setting becomes active except
when you display screen saver or thumbnail
images.
GUI
Brightness
s3 to r3
∫ Other Menu
Play as DVD-Video
or
Play as DVD-Audio
While stopped
≥Select “Play as DVD-Video” to play
DVD-Video contents on DVD-Audio.
Play as DVD-VR
Play as HighMATTM
or
Play as Data Disc
While stopped
≥Select “Play as Data Disc” to play
JPEG files on DVD-RAM or to play
HighMATTM disc without using the
HighMATTM function.
Setup
(l 26)
RQT7921
25
RQT7921-P_ENG.book
26 ページ
2005年5月25日 水曜日 午後3時24分
Changing the player settings
TV
≥The QUICK SETUP enables successive settings of the items
with
QUICK SETUP .
INPUT SELECTOR
DVD/VHS FM/AM
∫ “Disc” tab
DVD
VHS
TV
1
2
3
TUNER
Audio
DVD
Choose the audio language.
[English] [French] [Spanish]
CH
Numbered
buttons
4
5
6
8
9
PICTURE MODE
7
SETUP
Choose the subtitle language.
[Automatic]§3 [English] [French]
ENTER
S10
0
DISC
Menus
SLOW/SEARCH
SKIP
MENU
TOP MENU
NAVI
DIRECT
NAVIGATOR
PLAY
LIST
ENTER
RETURN
TV VOL
TV VOL
QUICK SETUP
Advanced Disc Review (l 18)
[Intro Mode]
ENTER
STATUS/
FUNCTIONS
RETURN
H.BASS C.FOCUS
TEST
CH SELECT
SUBWOOFER LEVEL SFC
SUPER SRND MUTING
SHIFT
SHIFT
1
SHIFT
r
SETUP
SLEEP
PL
QUICK
REPLAY
AUDIO
CANCEL
REC
RESET
TV/VIDEO
Shows Setup menu.
DISC
Reviews each title/program.
Interval Mode
Reviews not only each title/program but also each
10 minute interval within a title/program.
Ratings
Set a ratings level to limit DVD-Video play.
Follow the on-screen instructions.
≥Setting ratings (When level 8 is selected)
[8 No Limit]: All DVD-Video can be played.
[1 to 7]
[0 Lock All]: To prevent play of discs without ratings levels.
≥Changing ratings (When level 0–7 is selected)
[Unlock Player]
[Change Password]
[Change Level]
[Temporary Unlock]
§1
§2
2
Select
Select the tab.
ENTER
[Interval Mode]]
Intro Mode
MULTI RE-MASTER MIX 2CH PROGRESSIVE REPEAT
ZOOM
CD MODE PLAY MODE
QUICK OSD
ADVANCE
CM SKIP DISC REVIEW
PROG
SPEED
[Spanish] [Other¢¢¢¢]§2
Choose the language for disc menus.
[English] [French] [Spanish] [Other¢¢¢¢]§2
Changing the menu language from QUICK SETUP also changes this
setting.
JET REW
OPEN/CLOSE/EJECT
[Other¢¢¢¢]§2
Subtitle
VOLUME
SETUP
[Original]§1
§3
The original language designed on the disc is selected.
Input a code number referring to the table on page 27.
If the language selected for “Audio” is not available, subtitle
appears in that language (If available on the disc).
∫ “Video” tab
Go to right
3
Select
TV Aspect
Select the item.
4:3 Pan&Scan
Regular aspect television (4:3)
The sides of the widescreen
picture are cut off so it fills the
screen (unless prohibited by
the disc).
4:3 Letterbox
Regular aspect television (4:3)
Widescreen picture is shown
in the letterbox style.
16:9
Widescreen television (16:9)
ENTER
Register
4
Select
QUICK SETUP
Choose the setting to suit your television and preference.
[4:3 Pan&Scan] [4:3 Letterbox] [16:9]
Make the settings.
ENTER
TV Type
Register
1
2
3
4
5
6
7
8
9
Time Delay
ENTER
0
5
QUICK SETUP
Select to suit the type of television.
[Standard (Direct View TV)]
[CRT Projector]
[LCD TV/Projector]
[Projection TV]
[Plasma TV]
When connected to a Plasma display, adjust if you notice the audio is
out of the sync with the video.
[0ms] [20ms] [40ms] [60ms] [80ms] [100ms]
S10
RETURN
Press to exit.
Still Mode
Specify the type of picture shown when paused.
[Automatic] [Field] [Frame]
≥The settings remain intact even if you switch the unit to standby.
≥When you show Setup menu during playback, playback will stop
and resume function does not work.
≥Underlined items are the factory preset.
RQT7921
26
Automatic
Still picture is displayed without being blurred or at high
quality.
Field
The picture is not blurred, but picture quality is lower.
Frame
Overall quality is high, but the picture may appear
blurred.
RQT7921-P_ENG.book
27 ページ
2005年5月25日 水曜日 午後3時24分
[Remember] Press [DVD] first.
Black Level Control
∫ “Display” tab
Change the black level of the picture if you connected a television
through the COMPONENT VIDEO OUT terminals.
[Lighter] [Darker]
Menu Language
Lighter
When connected through VIDEO OUT or S-VIDEO OUT.
Darker
When connected through COMPONENT VIDEO OUT.
Dynamic Range Compression
On
QUICK SETUP
[Français]
[Español]
On-Screen Messages
[On]
[Off]
∫ “Others” tab
∫ “Audio” tab
[Off]
[English]
QUICK SETUP
[On]
[Yes]
Adjusts for clarity even when the volume is low through
compressing the range of the lowest sound level and
the highest sound level. Convenient for late night
viewing. (Only works with Dolby Digital)
Re-initialize Setting
This returns all values in the Setup menus to the default settings.
[Yes] [No]
Yes
Speaker Setting (lbelow)
Set the delay time for your center and surround speakers.
≥Center
0.0/1.0/2.0/3.0/4.0/5.0 ms
≥Surround (L/R)
0.0/5.0/10.0/15.0 ms
QUICK SETUP
[No]
The password screen is shown if “Ratings” (l 26) are
set. Please enter the same password. After “INIT” on
the display disappears, turn the unit off and on again.
Changing the delay time (Speaker Setting)
(Effective when playing multi-channel audio)
For optimum listening with 5.1-channel sound, all the speakers, except
for the subwoofer, should be the same distance from the seating
position. If you have to place the center or surround speakers closer to
the seating position, adjust the delay time to make up for the
difference.
If either distance a or b is less
than c, find the difference in the
relevant table and change to the
recommended setting.
: Recommended placement
L
R
C
a
c SW
Center delay time
b
L
Exit
ms
0.0
R
C
a Center speaker
Exit
LS
RS
LS
SW
ms
0.0
RS
Surround delay time
1 Press [3 4] to select the delay time box and press
[ENTER].
2 Press [3 4] to adjust the delay time and press
[ENTER].
To finish the speaker setting
Press [2] to select “Exit” and press [ENTER].
Difference
Setting
Approx. 30 cm (1 foot)
1.0 ms
Approx. 60 cm (2 feet)
2.0 ms
Approx. 90 cm (3 feet)
3.0 ms
Approx. 120 cm (4 feet)
4.0 ms
Approx. 150 cm (5 feet)
5.0 ms
b Surround speakers
Difference
Setting
Approx. 150 cm (5 feet)
5.0 ms
Approx. 300 cm (10 feet)
10.0 ms
Approx. 450 cm (15 feet)
15.0 ms
Language code list
Abkhazian:
6566
Afar:
6565
Afrikaans:
6570
Albanian:
8381
Ameharic:
6577
Arabic:
6582
Armenian:
7289
Assamese:
6583
Aymara:
6588
Azerbaijani:
6590
Bashkir:
6665
Basque:
6985
Bengali, Bangla:6678
Bhutani:
6890
Bihari:
6672
Breton:
6682
Bulgarian:
6671
Burmese:
7789
Byelorussian: 6669
Cambodian:
7577
Catalan:
6765
Chinese:
Corsican:
Croatian:
Czech:
Danish:
Dutch:
English:
Esperanto:
Estonian:
Faroese:
Fiji:
Finnish:
French:
Frisian:
Galician:
Georgian:
German:
Greek:
Greenlandic:
Guarani:
Gujarati:
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
Hausa:
7265
Hebrew:
7387
Hindi:
7273
Hungarian:
7285
Icelandic:
7383
Indonesian:
7378
Interlingua:
7365
Irish:
7165
Italian:
7384
Japanese:
7465
Javanese:
7487
Kannada:
7578
Kashmiri:
7583
Kazakh:
7575
Kirghiz:
7589
Korean:
7579
Kurdish:
7585
Laotian:
7679
Latin:
7665
Latvian, Lettish: 7686
Lingala:
7678
Lithuanian:
7684
Macedonian: 7775
Malagasy:
7771
Malay:
7783
Malayalam:
7776
Maltese:
7784
Maori:
7773
Marathi:
7782
Moldavian:
7779
Mongolian:
7778
Nauru:
7865
Nepali:
7869
Norwegian:
7879
Oriya:
7982
Pashto, Pushto: 8083
Persian:
7065
Polish:
8076
Portuguese:
8084
Punjabi:
8065
Quechua:
8185
Rhaeto-Romance: 8277
Romanian:
8279
Russian:
8285
Samoan:
8377
Sanskrit:
8365
Scots Gaelic: 7168
Serbian:
8382
Serbo-Croatian:8372
Shona:
8378
Sindhi:
8368
Singhalese:
8373
Slovak:
8375
Slovenian:
8376
Somali:
8379
Spanish:
6983
Sundanese:
8385
Swahili:
8387
Swedish:
8386
Tagalog:
8476
Tajik:
8471
Tamil:
8465
Tatar:
8484
Telugu:
Thai:
Tibetan:
Tigrinya:
Tonga:
Turkish:
Turkmen:
Twi:
Ukrainian:
Urdu:
Uzbek:
Vietnamese:
Volapük:
Welsh:
Wolof:
Xhosa:
Yiddish:
Yoruba:
Zulu:
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
RQT7921
27
RQT7921-P_ENG.book
28 ページ
2005年5月25日 水曜日 午後3時24分
Playback
Turn on the television and select the appropriate video input for the VHS.
1
2
3
Put the remote
control in VHS
mode.
VHS
4
Turn on the unit.
POWER
Í I
Insert a tape.
Play starts automatically if you insert a
prerecorded tape or one that has had its tab
removed.
Select “VHS”.
INPUT SELECTOR
2
TV
INPUT SELECTOR
DVD/VHS FM/AM
DVD
VHS
TV
1
2
3
4
5
6
TUNER
3
OPEN/CLOSE
CH
PICTURE MODE
7
VOLUME
9
8
ENTER
SETUP
S10
0
DISC
MENU
NAVI
DIRECT
NAVIGATOR
STOP
PLAY
PLAY
CH
PHONES
DOWN
UP
5
ENTER
RETURN
TV VOL
TV VOL
MULTI RE-MASTER MIX 2CH PROGRESSIVE REPEAT
ZOOM
CD MODE PLAY MODE
QUICK OSD
H.BASS C.FOCUS
TEST
CH SELECT
SUBWOOFER LEVEL SFC
SUPER SRND MUTING
ADVANCE
CM SKIP DISC REVIEW
PROG
SPEED
SHIFT
REC
STOP
-DEMO
PLAY
LIST
STATUS/
FUNCTIONS
SHIFT
VOLUME
FF/
, JET REW
JET REW
OPEN/CLOSE/EJECT
TOP MENU
PAUSE
SLOW
6
/REW
H.BASS
SLOW/SEARCH
SKIP
STOP
EJECT
EJECT
EJECT
DISC CHECK
SLEEP
PL
QUICK
REPLAY
AUDIO
CANCEL
REC
Press to
– fast-forward and rewind.
(while stopped)
– cue and review.
(during play)
Press twice to Jet search.
(during play)
Stop
STOP
PLAY
Start play.
VOLUME
Adjust the volume.
––dB N 0dB
(Minimum) (Maximum)
RESET
TV/VIDEO
/REW
5
6
FF/
Press twice
Stop
Jet search
≥Press [1] (play) to start play.
DOWN
UP
≥Press [1] (play) to start play.
≥There is no sound.
SLOW/SEARCH
(during play)
Pause
Press and
hold
SHIFT
≥There is no sound.
Jet rewind
Slow
(while stopped)
i
≥The tape counter does not
appear.
≥You can use jet rewind after
pressing [VHS] while using
another source.
JET REW
Fast-forward
and rewind
≥You can use fast-forward and
rewind after pressing [VHS]
while using another source.
(while stopped)
SLOW/SEARCH
Cue and
review
(during play)
≥There is no sound.
≥Press and hold during play.
Play restarts when you release
the button.
[Note]
RQT7921
28
≥Pause stops after 5 minutes. Cue, review and jet search restart to
play after 10 minutes.
≥The tape moves at high speed during fast-forward, rewind, and jet
rewind so the unit will make a noise. Also, it takes some time for the
tape to stop after you press [∫].
≥The picture during cue, review, and jet search may be disrupted or
otherwise affected on some televisions. During jet search at 35 times
normal speed through EP or VP recordings, the picture may scroll
vertically on some televisions. Change to 27 times normal speed if
this occurs (l 38).
SHIFT
Eject
i
OPEN/CLOSE/EJECT
≥You can eject tapes when the
unit is in standby mode. It
switches back to standby mode
once it ejects the tape.
≥You cannot eject tapes when
the unit is recording or in timer
recording standby mode.
≥Jet rewind function is not applicable for 160 minutes tape and above.
RQT7921-P_ENG.book
29 ページ
2005年5月25日 水曜日 午後3時24分
[Remember] Press [VHS] first.
TV
SHIFT
INPUT SELECTOR
DVD/VHS FM/AM
VHS
DVD
TV
VHS
2
3
4
5
6
PICTURE MODE
CH
CH
Press [SHIFT]i[PICTURE MODE].
VOLUME
8
9
ENTER
SETUP
S10
0
DISC
Picture mode
7
Changes the picture quality to suit the material you are playing.
1
7
PICTURE MODE
TUNER
CH
PICTURE
MODE
r
SLOW/SEARCH
SKIP
JET REW
OPEN/CLOSE/EJECT
STANDARD
MENU
TOP MENU
NAVI
DIRECT
NAVIGATOR
PLAY
LIST
ENTER
STATUS/
FUNCTIONS
RETURN
TV VOL
TV VOL
Each time you do this:
STANDARD: for recordings of television program (Factory preset)
DYNAMIC:
clear, vivid pictures for scenery and sports
SOFT:
for prerecorded tapes
MULTI RE-MASTER MIX 2CH PROGRESSIVE REPEAT
QUICK OSD
ZOOM
CD MODE PLAY MODE
H.BASS C.FOCUS
TEST
CH SELECT
SUBWOOFER LEVEL SFC
SUPER SRND MUTING
ADVANCE
CM SKIP DISC REVIEW
PROG
SPEED
SHIFT
SHIFT
SLEEP
PL
QUICK
REPLAY
AUDIO
CANCEL
REC
RESET
TV/VIDEO
Repeat play
Plays a program repeatedly.
Press and hold [1] (play) for about five seconds.
“R1” / “R” appears on the television and the main unit.
0:00.22
R1 SP 1
Manual tracking
C.F
PL II
SFC
SLEEP SP EP VP
S.SRND LP
dB w REC
This unit has an automatic digital tracking control feature that usually
makes tracking adjustments for you, but you may need to do it
manually, such as if noise appears on a tape recorded on other
equipment.
CH
At the end of the program, the tape rewinds to the beginning of the
program and plays it again. (It only works if there is a five-second
blank at the end of the program.) This repeats until you cancel it.
During play
Press [W CH] or [X CH].
Repeat until the noise disappears.
To cancel
Press [1] (play).
≥It also cancels if you stop, pause, cue, or review.
To return to automatic digital tracking control
Press [W CH] and [X CH] at the same time.
To remove the noise from a paused picture
Start slow play, then adjust the tracking.
[Note]
This may not be effective on some tapes.
Vertical locking adjustment
Adjusts the vertical hold to keep the picture from jiggling.
While paused
Press [W CH] or [X CH].
Repeat until the jiggling stops.
To return to the previous condition
Press [W CH] and [X CH] at the same time.
[Note]
This may not work with some televisions. Try adjusting the vertical on
the television itself.
RQT7921
29
RQT7921-P_ENG.book
30 ページ
2005年5月25日 水曜日 午後3時24分
Manual recording
TV
DVD/VHS FM/AM
DVD
VHS
TV
1
2
3
4
5
6
8
9
TUNER
DVD
VHS
CH
Numbered
buttons
PICTURE MODE
7
FM/AM
DVD/VHS
TUNER
TV
To pause recording
Press [;].
Press it again or press [SHIFT]i[¥ REC] to continue recording.
CH
CH
∫ To specify a time to stop recording (l page 42,
Sleep timer)
VOLUME
ENTER
SETUP
S10
0
DISC
To stop recording
Press [∫].
INPUT SELECTOR
[Note]
SLOW/SEARCH
SKIP
≥You cannot change channels while recording. You can change
channels while paused.
≥The unit will automatically return to the stop mode after a pause of 5
minutes while recording.
≥Even if the tape you use is labeled “S-VHS”, the recordings you
make do not use this system.
≥You cannot record from the disc section to the unit.
JET REW
OPEN/CLOSE/EJECT
MENU
TOP MENU
NAVI
DIRECT
NAVIGATOR
ENTER
PLAY
LIST
ENTER
STATUS/
FUNCTIONS
RETURN
TV VOL
TV VOL
∫ Tape speeds
MULTI RE-MASTER MIX 2CH PROGRESSIVE REPEAT
QUICK OSD
ZOOM
CD MODE PLAY MODE
There are three tape speeds.
SP: You can record the length shown on the tape.
EP: Three times the length of SP mode.
VP: Five times the length of SP mode.
H.BASS C.FOCUS
TEST
CH SELECT
SUBWOOFER LEVEL SFC
SUPER SRND MUTING
SPEED
ADVANCE
CM SKIP DISC REVIEW
PROG
SPEED
SHIFT
SHIFT
SHIFT
r
REC
SLEEP
PL
QUICK
REPLAY
AUDIO
CANCEL
REC
REC
RESET
TV/VIDEO
≥You cannot play tapes recorded with VP mode on other equipment.
≥It takes more time for automatic tracking to work when playing tapes
recorded with VP mode, and it may not work at all with some tapes.
Do tracking manually if this is the case (l 29).
≥This unit can play tapes recorded with LP mode on other equipment
(“LP” lights on the display).
TV/VIDEO
Recording a program
Preparation
Turn on the television and select the video input for the VHS.
1
Press [VHS] to put the remote control in
VHS mode.
2
3
Press [Í] to turn on the unit.
4
Insert the tape you want to record to.
Press [DVD/VHS] to select “VHS” as the
source.
Ensure its tab is in place (l 3).
5
Select the channel with the numbered
buttons, [W CH] or [X CH].
≥To select with the numbered buttons:
TV Mode (Airwaves)
e.g.
2:
[2] l [ENTER]
23:
[2] l [3] l [ENTER]
CATV Mode (Cable)
e.g.
2:
[2] l [ENTER]
23:
[2] l [3] l [ENTER]
123:
[1] l [2] l [3]
6
Press [SPEED] to select the tape speed.
SP>EP>VP
^""-""""b
7
SP EP VP
Press [SHIFT]i[¥ REC] to start
recording.
“REC” lights on the unit’s display.
REC
RQT7921
30
RQT7921-P_ENG.book
31 ページ
2005年5月25日 水曜日 午後3時24分
[Remember] Press [VHS] first.
Using another source while recording
Recording from other equipment
You can watch and listen to other content when the unit is in timer
recording standby or during VHS recording.
You can record from other video equipment. (video cassette recorder,
camera, etc.)
∫ Television (l 12)
Preparation
≥Connect the equipment to this unit’s input terminals.
– Turn the unit off before making connections.
– If audio output on the other equipment is monaural, use a stereomonaural conversion cable (not included).
≥Insert the tape, ensuring its tab is in place and find the place to start
recording.
1 During recording
Press [TV] to put the remote control in TV mode.
2 Press [TV/VIDEO] then select the channel with the numbered
buttons, [W CH] or [X CH].
∫ DVD (l 16)
Other equipment (play)
1 During recording
Press [DVD] to put the remote control in DVD mode.
2 Press [DVD/VHS] to select “DVD/CD”.
3 Insert a disc and start play.
To video and audio
out terminals
∫ Radio (l 40)
Audio/video cable
(not included)
1 During recording
Press [TUNER] to put the remote control in TUNER mode.
2 Press [FM/AM] to select the radio band.
3 Select the radio channel with the numbered buttons, [W CH] or
[X CH].
[Note]
When you want to operate the VHS section again, be sure to press
[VHS] to put the remote control in VHS mode.
TO
SB-WA830
A
DVD
DVD/VHS
EXT
LOOP
ANT
GND
RF IN
75
LOOP
FM
ANT
AM
ANT
RF OUT
DIGITAL
TRANSMITTER
VIDEO
Y
PB/
CB
L
P R/
CR
R
EXT
S-VIDEO COMPONENT
VIDEO OUT
OUT
OUT
IN
1
Press [W CH] or [X CH] to select “AV”
channel.
2
Press [1] (play) to find the place to
start recording.
3
Press [;], then press [SHIFT]i[¥ REC]
to put the unit in recording standby
mode.
4
Press [SPEED] to select the tape speed.
SP>EP>VP
^"""""""b
5
6
Start play on the other equipment.
Press [;] when you want to start
recording.
To stop
Press [∫].
∫ To make a timer program to record from other
equipment (l 32)
RQT7921
31
RQT7921-P_ENG.book
32 ページ
2005年5月25日 水曜日 午後3時24分
Timer recording
TV
6
Select “OFF” with [2 1] and change
the end time with [3 4].
7
Press [SPEED] to change the tape
speed.
INPUT SELECTOR
DVD/VHS FM/AM
DVD
VHS
TV
1
2
3
4
5
6
TUNER
VHS
SP>EP>VP>A§
^"""""""-""b
§
Auto SP/EP change function (l 33)
CH
PICTURE MODE
7
VOLUME
8
9
S10
0
DISC
8
ENTER
SETUP
SLOW/SEARCH
SKIP
MENU
NAVI
DIRECT
NAVIGATOR
PLAY
LIST
ENTER
STATUS/
FUNCTIONS
RETURN
TV VOL
TV VOL
Repeat steps 2 to 8 to make further timer programs.
9
MULTI RE-MASTER MIX 2CH PROGRESSIVE REPEAT
QUICK OSD
ZOOM
CD MODE PLAY MODE
H.BASS C.FOCUS
TEST
CH SELECT
SUBWOOFER LEVEL SFC
SUPER SRND MUTING
ADVANCE
CM SKIP DISC REVIEW
PROG
SPEED
PROG
SPEED
SHIFT
SLEEP
PL
QUICK
REPLAY
REC
RESET
TV/VIDEO
Timer recording
Preparation
≥Make sure the unit’s clock is correct (l 36 to adjust it if necessary).
≥Insert a tape, ensuring its tab is in place (l 3).
While stopped, press [PROG].
The timer-programming screen appears.
1
2
3
4
5
6
7
8
DATE CH
27WE
2
SU – SA 125
SU
14
19TU
5
28TH
AV
30SA
4
–––– ––
–––– ––
ON
8:02PM
10:30AM
3:00PM
10:15PM
8:02PM
7:10PM
–:– –
–:– –
OFF 1/2
9:30PMSP
11:00AMA
4:00PMEP
11:30PMVP
9:30PMSP
7:55PMVP
–:– –
–:– –
PROG. :ENTER END:MENU
2
Press [PROG] to select an available line
and press [ENTER].
3
Select “DATE” with [2 1] and change
it with [3 4].
The date changes as follows:
A.Current date
l;:
lNext day up to one month later minus one day
l;:
lWeekly timer: SU–SA > MO–SA > MO–FR
l;:
a.Daily timer: SU > MO > TU > WE > TH > FR > SA
4
Select “CH” with [2 1] and change it
with [3 4].
Select “AV” when recording from other equipment (l 31).
RQT7921
32
5
” lights on the unit’s display.
RESET
CANCEL
You can create up to 16 timer recording programs. You can set the
timer to record an individual program up to a month in advance, record
at the same time on the same day every week, or at the same time
daily.
1
Press [ ] to put the unit on timer
recording standby.
“
AUDIO
CANCEL
SHIFT
PROG
Press [1] (cursor) to select a category column. Press [3 4] to
enter the category selection menu. Then select a category with
[3 4 2 1], and confirm with [MENU].
You can also set and change the category in the navigator list
(l 35).
MENU
TOP MENU
ENTER
Select a category.
JET REW
OPEN/CLOSE/EJECT
If the Jet Navigator is on (l 34),
Select “ON” with [2 1] and change the
start time with [3 4].
10 Press [Í] to switch the unit to standby.
The timer recording works whether the unit is on or not, so you
can play DVDs or listen to the radio (l 31). Switch the unit to
standby if you are finished.
To cancel the selected line
Press [SHIFT]i[RESET].
To release the unit from timer recording standby
Press [
].
To stop recording
Press [
].
RQT7921-P_ENG.book
33 ページ
2005年5月25日 水曜日 午後3時24分
[Remember] Press [VHS] first.
To check, correct, and cancel timer programs
∫ To check a program
Press [PROG].
The timer-programming screen appears.
∫ To correct a program
While the timer programming screen is on the television,
1 Press [PROG] to highlight the program you want to correct and
press [ENTER].
2 Select the item with [2 1] and correct it with [3 4].
DATE CH ON
2 8:02PM
1 27WE
2 SU-SA 125 10:30AM
14 3:00PM
3 SU
5 10:15PM
4 19TU
5 28TH AV 8:02PM
6 30SA
4 7:10PM
7 – – – – – – –:– –
8 – – – – – – –:– –
SELECT:2 1
OFF 1/2
9:30PMSP
11:00AMA
4:00PMEP
11:30PMVP
9:30PMSP
7:55PMVP
–:– –
–:– –
s/r: 4 3
∫ To cancel a program
While the timer programming screen is on the television,
1 Press [PROG] to highlight the program you want to cancel.
2 Press [CANCEL].
To clear the timer programming screen
Press [MENU].
Auto SP/EP change
The unit switches tape speed to EP if it determines there is not enough
tape to record the entire program in SP mode. The change may start
at the beginning of the recording or part way through, depending on
the remaining tape.
Before using this function, set the length of the tape you are using
(l 38). It may not work correctly if you use tapes with irregular
lengths.
Example program combination
1st program
(30 min.)
2nd program (60 min.)
Example program combination
30 min. at SP
15 min.
at SP
45 min.
at EP
(when using a 60-min.
tape)
[Note]
This function does not guarantee recording of the entire program.
RQT7921
33
RQT7921-P_ENG.book
34 ページ
2005年5月25日 水曜日 午後3時24分
Convenient functions (Jet Navigator, VISS, On-screen display)
TV
INPUT SELECTOR
NAVI
DVD/VHS FM/AM
DVD
TV
VHS
TUNER
1
Press [NAVI] to show the “JET
NAVIGATOR” screen.
2
S10
Press [NAVI] to highlight the program
you want to watch.
SLOW/SEARCH
The most recent program is highlighted first.
VHS
1
2
3
4
5
6
CH
PICTURE MODE
VOLUME
7
8
9
ENTER
SETUP
0
DISC
SKIP
JET REW
OPEN/CLOSE/EJECT
MENU
NAVI
DIRECT
NAVIGATOR
ENTER
STATUS/
FUNCTIONS
Once you have highlighted the program, wait about three seconds.
The unit then starts searching for the program and starts play.
MENU
TOP MENU
NAVI
∫ Using the Jet Navigator to find
programs
JET NAVIGATOR
DATE
CH ON
CATEGORY
10/18
1 10: 3 0 PM MUSIC
1 0 / 1 9 124 3:00PM SPORT
10/21
5 10: 1 5 AM
--1 0 / 2 3 AV 8:02PM
10/26
4 7:10AM EDUCA
1 10/27
-2 8:02AM
1 0 / 2 7 12 8:30PM
-SELECT:NAVI , 1
END:MENU
PLAY
LIST
ENTER
STATUS/
FUNCTIONS
RETURN
TV VOL
TV VOL
MULTI RE-MASTER MIX 2CH PROGRESSIVE REPEAT
QUICK OSD
ZOOM
CD MODE PLAY MODE
H.BASS C.FOCUS
TEST
CH SELECT
SUBWOOFER LEVEL SFC
SUPER SRND MUTING
ADVANCE
CM SKIP DISC REVIEW
PROG
SPEED
SHIFT
SLEEP
PL
SHIFT
QUICK
REPLAY
AUDIO
CANCEL
REC
REC
RESET
TV/VIDEO
RESET
CANCEL
Jet Navigator
This unit can display a list of the recorded programs on the inserted
tape on the TV screen. You can then select the desired program, and
this unit will quickly reach its beginning and start playback.
∫ Saving Jet Navigator data
The unit can save the data for up to 14 recordings on a tape, for 20
different tapes, and for a total of 50 recordings.
1
Press [MENU] to display the “VHS
MENU” screen.
2
Press [3 4] to select “OPTION” menu
and press [ENTER].
Press [3 4] to select “JET
NAVIGATOR” and press [2 1] to
change the setting to “ON”.
3
OPTION
1/2
OSD
OFF
≥ ON
TAPE SELECT
≥T 1 2 0 T 1 6 0
T180
≥ ON
BLUE BACK
OFF
JET NAVIGATOR
OFF
≥ ON
DELETE NAVIDATA ≥ NO
YES
J E T SEARCH
2 7 ≥ 35
SELECT : 4 3 s / r: 2 1
END
:MENU
4
Press [3 4] to select “TAPE SELECT”
and press [2 1] to set the length of the
tape you are using.
T120: T30, T60, T90, T120 tapes
T160: T140, T160 tapes
T180: T180 tapes
5
RQT7921
34
Record programs (l pages 30–32).
The unit makes the list as you record.
To exit the settings screen
Press [MENU] until the screen disappears.
The channel, date, and time of a recording appear on the television
when play starts.
To clear the Jet Navigator list
Press [MENU].
∫ To delete the Jet Navigator on a video cassette
tape
Keep [CANCEL] pressed for more than 5 seconds while the Jet
Navigator list appears. “- -” appears on the list.
∫ To delete all the Jet Navigator data stored in the
unit’s memory (l 38).
RQT7921-P_ENG.book
35 ページ
2005年5月25日 水曜日 午後3時24分
[Remember] Press [VHS] first.
Setting categories
STATUS/
FUNCTIONS
Set categories to make it easier to see what kind of programs are in
the list.
1
2
Press [1] (cursor) while the program
you want to categorize is highlighted.
Press [3 4 2 1] to select a category
and press [MENU] to confirm and
return to the previous screen.
Category
Indication
MOVIE
Icon
Category
Indication
MOVIE
SPORTS
SPORT
MUSIC
MUSIC
CHILDREN
CHILD
DRAMA
DRAMA
NEWS
NEWS
EDUCATION
EDUCA
OTHERS
OTHER
DOCUMENTARY
DOCUM
On-screen display
To see these displays, set the OSD item in the OPTION menu to ON.
Press [STATUS/FUNCTIONS].
The time and operation details appear on the screen for about 5
seconds.
1
2 3
CH 1
STEREO
LR
4
5
0:00.22
1 SP 1
Icon
To return to the Jet Navigator list
Press [MENU].
STANDARD
Channel display
Displays the cable television channel or television channel
currently being received.
2
STEREO/SAP indication
Indicates when a program is broadcast in stereo or SAP.
(l 39)
3
L and R indicators
The Left (L) and Right (R) indicators show which sound
mode is selected as follows:
Stereo: Both the L and R indicators appear.
L:
The L indicator appears.
R:
The R indicator appears.
Mono:
Neither the L and R indicator appears.
4
Tape running display
Shows operations taking place.
5
Shows the time and tape counter
Press [STATUS/FUNCTIONS].
The display changes as follows:
Present time>Tape counter>Remaining tape time
^""""""""""""""""""b
Using index search: “S 01” to “S 20” is displayed.
Using jet rewind: “J.REW” is displayed (except when the
remaining tape time indication appears).
≥Press [SHIFT]i[RESET] to reset the tape counter
(elapsed time) to “0:00.00”.
≥The remaining time is approximate. It will be incorrect if
you set the wrong tape time in the TAPE SELECT item in
the OPTION menu and if the tape is of poor quality.
6
Cassette in indicator
Shows whether you have loaded a cassette.
7
Tape speed indicator
(l 30)
8
Picture mode indicator
(l 29)
To demonstrate the Jet navigator function
Keep [NAVI] pressed for more than 5 seconds without inserting a
cassette tape.
Finding programs—VHS Index Search
System (VISS)
Use the index marks on a tape to find sections to play.
The unit adds index marks when recording starts. To add them
manually during recording, press [SHIFT]i[¥ REC].
8
1
[Note]
≥If you have already stored 14 programs on a tape and you then store
another one, the new item is added and the oldest is deleted.
≥“REMAINING PROGRAM 0 DELETE JET NAVIGATOR DATA”
appears when you try to store more than fifty programs. The new
item is added and the oldest item is deleted.
≥“REMAINING CASSETTE 0 FOR JET NAVIGATOR DATA” appears
when you try to store items for more than 20 tapes. Delete all the Jet
Navigator data in the unit if you want to save the data for the tape
(l 38).
≥The list does not appear when playing tapes recorded on other
equipment.
≥Parts of the list data are recorded on the tape. Take care when
recording over older recordings that you do not overlap it. It is
recorded within a few minutes either side of the beginning of the
recording (longer if you used EP or VP).
6
7
While stopped or during play
Press [:] (backward) or [9] (forward)
to skip to the part you want to play.
[:]
twice
Program
once
once
[9]
twice
Program
[Note]
≥These displays do not appear when paused or during slow play.
≥The on-screen display may be disturbed depending on the playback
tape or the input signal.
Program
Index mark
≥Up to 20 index signals can be searched for in both directions.
≥You can reduce the number of skips by pressing the opposite button.
≥This feature may not work correctly if the marks are too close
together. Make recordings of at least 15 minutes (25 minutes in VP
mode).
RQT7921
35
RQT7921-P_ENG.book
36 ページ
2005年5月25日 水曜日 午後3時24分
Changing settings
TV
LANGUAGE
INPUT SELECTOR
DVD/VHS FM/AM
Select the language for these menus and other on screen displays.
VHS
DVD
VHS
TV
1
2
3
4
5
6
TUNER
1
CH
PICTURE MODE
7
8
9
ENTER
SETUP
S10
0
DISC
≥ENGLISH (Factory preset)
≥ESPAÑOL
≥FRANÇAIS
SLOW/SEARCH
SKIP
JET REW
OPEN/CLOSE/EJECT
MENU
TOP MENU
DIRECT
NAVIGATOR
Press [MENU] to confirm and return to
the previous screen.
PLAY
LIST
ENTER
STATUS/
FUNCTIONS
RETURN
TV VOL
TV VOL
H.BASS C.FOCUS
TEST
CH SELECT
SUBWOOFER LEVEL SFC
SUPER SRND MUTING
ADVANCE
CM SKIP DISC REVIEW
PROG
SPEED
SLEEP
PL
QUICK
REPLAY
AUDIO
CANCEL
SELECT
END
: 3 4:
:MENU
CLOCK SET
MULTI RE-MASTER MIX 2CH PROGRESSIVE REPEAT
QUICK OSD
ZOOM
CD MODE PLAY MODE
SHIFT
LANGUAGE
≥ ENGLISH
ESPAÑOL
FRANÇAIS
MENU
NAVI
ENTER
2
VOLUME
Press [3 4] to select “LANGUAGE”
and press [ENTER].
Press [3 4] to choose the preferred
language.
The clock is set automatically after Plug-in Auto Tuning (l 11). Do the
following if you want to set it again or if the time is not set correctly.
REC
1
RESET
TV/VIDEO
Press [3 4] to select “CLOCK SET”
and press [ENTER].
AUTO CLOCK SET
1
Shows VHS MENU.
MENU
2
VHS MENU
≥ LANGUAGE
CLOCK SET
CHANNEL SET
OPTION
SELECT : 3 4 , ENTER
END
:MENU
2
Select
Select the item.
Press [3 4] to
select “AUTO
CLOCK SET” and
press [ENTER].
AUTO CLOCK SET
AUTO CLOCK SETTING
IN PROGRESS.
PLEASE WAIT.
Auto setting starts. This can take some
time.
CANCEL:MENU
To stop partway through
Press [MENU].
∫ If the unit cannot set the clock automatically
The MANUAL CLOCK SET screen appears. Set the time manually
(l below).
ENTER
Register
MANUAL CLOCK SET
3
Select
Make the settings.
2
ENTER
Register
4
MENU
Press [3 4] to
select “MANUAL
CLOCK SET” and
press [ENTER].
MANUAL CLOCK SET
Y
2005
M
1
D. S. T.
SELECT
START
Press to exit.
3
≥The settings remain intact even if you switch the unit to standby.
D
1
H:M
1 2 : 0 0 AM
: YES
≥NO
: 21
s/r: 4 3
: MENU
Press [2 1] to select the item you want
to change and press [3 4] to change
the setting.
≥D.S.T.: Daylight Saving Time
4
Press [MENU] to start the clock and exit
the setting screen.
∫ Time reset function
If the clock is less than 2 minutes slow or fast, it can easily be reset to
the proper time when it is 12:00:00.
1 Display the MANUAL CLOCK SET screen on the TV screen.
RQT7921
36
2 When the current clock displays on the unit is between 11:58 and
12:01, press [MENU] as soon as you see 12:00:00. This resets the
time to 12:00:00.
RQT7921-P_ENG.book
37 ページ
2005年5月25日 水曜日 午後3時24分
[Remember] Press [VHS] first.
MANUAL
CHANNEL SET
The unit tunes automatically after you plug it in and turn it on for the
first time (l 11, Plug-in Auto Tuning), but you can start the process
again if necessary.
≥Make sure you have tuned to a television channel. This does not
work if you have selected “AV” channel.
1
While VHS MENU is displayed (l 36)
Press [3 4] to select “CHANNEL SET”
and press [ENTER].
ANTENNA SYSTEM
You can manually preset channels that are skipped when using the
auto channel setting, and manually skip channels that are preset.
2
3
4
Press [3 4] to select “MANUAL” and
press [ENTER].
Press [3 4] to select “CH” and [2 1]
to select the channel.
Press [3 4] to select “BLANK” and
[2 1] to select “ON” or “OFF”.
MANUAL CHANNEL SET
2
3
Press [3 4] to select “ANTENNA
SYSTEM” and press [ENTER].
Press [3 4] to select “TV” or “CATV”
to suit the type of antenna you are
using.
CH
BLANK
SELECT
END
2
ON ¥ OFF
: 4 3 s/r: 2 1
:MENU
To exit the settings screen
Press [MENU] until the screen disappears.
ANTENNA SYSTEM
≥ TV
CATV
∫ Channel range
≥TV mode
SELECT
END
Band
Airwaves
VHF
2–13
UHF
14–69
Band
Cable
VHF
2–13
CATV LOW BAND
95–99
CATV MID/SUPER BAND
14–36
CATV HYPER BAND
37–65
: 34
:MENU
Channels are set corresponding to the antenna system you select.
This is set automatically when you do Plug-in Auto Tuning.
≥CATV mode
To exit the settings screen
Press [MENU] until the screen disappears.
AUTO
Auto tuning searches for TV stations and memorizes every tuned
program position. Other program positions are skipped. (Channel
range l right)
66–94
ULTRA BAND
100–125
2
Press [3 4] to select “AUTO” and
press [ENTER].
SPECIAL CATV CHANNEL
1
Auto tuning starts. It takes three or more minutes to complete.
2
AUTO CHANNEL SET
PROCEEDING
END
:MENU
To stop partway through
Press [MENU].
RQT7921
37
RQT7921-P_ENG.book
38 ページ
2005年5月25日 水曜日 午後3時24分
Changing settings
≥Underlined items are the factory preset.
TV
∫ Items
INPUT SELECTOR
DVD/VHS FM/AM
OSD (l 35, On-screen display)
DVD
VHS
TV
1
2
3
5
6
TUNER
[ON]:
VHS
[1], [2]
[OFF]:
Messages appear on the television for about five
seconds after you perform operations.
Messages do not appear.
CH
4
PICTURE MODE
7
S10
SLOW/SEARCH
SKIP
JET REW
OPEN/CLOSE/EJECT
MENU
TOP MENU
MENU
NAVI
DIRECT
NAVIGATOR
ENTER
Set the length of tape you are using so the unit can show the correct
remaining time.
[T120]:
T30, T60, T90, T120 tapes
[T160]: T140, T160 tapes
[T180]: T180 tapes
ENTER
0
DISC
TAPE SELECT
VOLUME
9
8
SETUP
BLUE BACK
PLAY
LIST
[ON]:
STATUS/
FUNCTIONS
RETURN
[OFF]
TV VOL
TV VOL
ENTER
JET NAVIGATOR (l 34)
MULTI RE-MASTER MIX 2CH PROGRESSIVE REPEAT
QUICK OSD
ZOOM
CD MODE PLAY MODE
[ON]:
[OFF]:
H.BASS C.FOCUS
TEST
CH SELECT
SUBWOOFER LEVEL SFC
SUPER SRND MUTING
ADVANCE
CM SKIP DISC REVIEW
PROG
SPEED
SHIFT
SHIFT
SLEEP
PL
QUICK
REPLAY
AUDIO
CANCEL
REC
2
Delete all the Navigation data registered in the unit.
See page 34 to delete data on a single tape.
[NO]
[YES]:
Then press [ENTER] when you want to delete all the Jet
navigator data.
AUDIO
JET SEARCH (l 28)
Set the speed for JET SEARCH when playing EP and VP tapes.
[a27] [a35]
While VHS MENU is displayed (l 36)
Press [3 4] to select the “OPTION”
and press [ENTER].
≥Select a27 if the picture is poor at a35.
Press [3 4] to select the item and
press [2 1] to change the setting
(l below).
Set the MTS (Multi-channel Television Sound Stereo) reception type.
[MAIN]: To receive stereo broadcasts.
[SAP]:
To receive SAP when being broadcast.
[MONO]: To receive monaural broadcasts (e.g., when reception is
poor).
OPTION
1/2
OSD
OFF
≥ ON
TAPE SELECT
≥T 1 2 0 T 1 6 0
T180
≥ ON
BLUE BACK
OFF
JET NAVIGATOR
OFF
≥ ON
DELETE NAVIDATA ≥ NO
YES
J E T SEARCH
2 7 ≥ 35
SELECT : 4 3 s / r: 2 1
END
:MENU
OPTION
2/2
≥ M A I N S A P MONO
MTS
≥1
REMOTE CONTROL
2
DISPLAY
BRIGHT ≥DIM OFF
SELECT : 4 3 s/r:
END
:MENU
To exit the settings screen
Press [MENU] until the screen disappears.
RQT7921
38
Jet Navigator data automatically registered.
Data not registered.
DELETE NAVIDATA
RESET
TV/VIDEO
OPTION
1
The screen shows a blue background when you play
unrecorded portions.
21
MTS (l 39, Changing audio)
REMOTE CONTROL (l 39)
[1]
[2]
DISPLAY
Set the brightness of the unit's display when the unit is in standby
mode.
[BRIGHT]:The display is bright all the time.
[DIM]:
The display dims when the unit is in standby mode.
[OFF]:
The display turns off when the unit is in standby mode.
≥When Demo function is on, the display does not turn off even if
“OFF” is selected. Select “DEMO OFF” to reduce power
consumption (l 9).
RQT7921-P_ENG.book
39 ページ
2005年5月25日 水曜日 午後3時24分
[Remember] Press [VHS] first.
REMOTE CONTROL
Panasonic video cassette recorders use the same remote control
system so they may respond unintentionally to a command from this
remote control. Change the code on this unit and its remote control
(the two must match) if you place another Panasonic video cassette
recorder close together.
≥Use “1”, the factory preset, under normal circumstances.
1
2
r
AUDIO
CANCEL
Changing audio
When a stereo and/or SAP broadcast is received, “STEREO” and/or
“SAP” appear showing the type of broadcast.
To change the audio
Press [SHIFT]i[AUDIO].
While OPTION menu is displayed
Press [3 4] to select the “REMOTE
CONTROL”.
Press [2 1] to select the code (1 or 2)
and press [MENU].
The remote control code on the unit has been set.
3
SHIFT
While pressing [ENTER] on the remote
control, press and hold the numbered
button ([1] or [2]) corresponding to the
code you selected in step 2.
When the remote control code on the remote is set, “REMOTE”
indication (l below) disappears.
The following is displayed for a few seconds on the main unit when you
use a remote control with the different code.
The audio changes as follows:
≥When playing a tape:
LR>L>R>Monaural audio track
^""""""""-""""b
≥While watching the television:
LR>L>R
^"""-"b
The table below shows the TV broadcast type, “MTS” settings, and
audio recording patterns.
TV
broadcast
MTS
setting
Audio track
Normal
(Mono)
Hi-Fi
Left
Right
Mono
MAIN or
SAP
Mono
Mono
Mono
Stereo
MAIN or
SAP
LiR
(Mixed)
Left
Right
Mono and
SAP
MAIN
Mono
Mono
Mono
SAP
Mono
Mono
SAP
Stereo and
SAP
MAIN
LiR
(Mixed)
Left
Right
SAP
LiR
(Mixed)
LiR
(Mixed)
SAP
The unit’s remote control code
Change its code to match the unit’s (l step 3).
Be sure that “MTS” is set to “MAIN” or “SAP” to record on the Hi-Fi
audio tracks.
[Note]
≥Switch to “MONO” for viewing or recording if a stereo or SAP
broadcast is impaired by poor reception.
≥To resume stereophonic recording, set “MTS” to “MAIN” or “SAP”.
Auto bilingual choice function
When you play back recordings of stereo or SAP broadcasts, these
audio types are automatically selected. The unit may select a different
type if you start play midway through the program. Press
[SHIFT]i[AUDIO] to change the type if this occurs.
This function does not work if:
– The tape was recorded on a deck without this system.
– The tape is a recording from external equipment.
RQT7921
39
RQT7921-P_ENG.book
40 ページ
2005年5月25日 水曜日 午後3時24分
The radio
[Remember] Press [TUNER] first.
Press [TUNER] to put the remote control in TUNER mode.
∫ Presetting the channel one by one
TV
INPUT SELECTOR
DVD/VHS FM/AM
DVD
TV
VHS
1
2
3
FM/AM
TUNER
TUNER
Numbered
buttons
1
2
3
4
5
6
CH
PICTURE MODE
7
CH
CH
9
ENTER
SETUP
S10
0
DISC
VOLUME
SLOW/SEARCH
SKIP
Press [ENTER].
While “PGM” is blinking on the display
Press the numbered buttons to select a
channel.
VOLUME
8
Tune to the station (l above).
Alternatively, press [W CH] or [X CH] then press [ENTER].
JET REW
OPEN/CLOSE/EJECT
PGM
MENU
TOP MENU
NAVI
ENTER
PLAY
LIST
DIRECT
NAVIGATOR
The station occupying a channel is erased if another station is preset
to that channel.
ENTER
STATUS/
FUNCTIONS
RETURN
TV VOL
TV VOL
MULTI RE-MASTER MIX 2CH PROGRESSIVE REPEAT
ZOOM
CD MODE PLAY MODE
QUICK OSD
H.BASS
C. FOCUS
SFC
SHIFT
H.BASS C.FOCUS
TEST
CH SELECT
SUBWOOFER LEVEL SFC
SUPER SRND MUTING
QUICK
REPLAY
ADVANCE
CM SKIP DISC REVIEW
PROG
SPEED
SLEEP
PL
SHIFT
AUDIO
CANCEL
REC
RESET
TV/VIDEO
PLAY MODE
Selecting the preset channels
CH SELECT
TEST
SUPER SRND
1
2
PL
Press [FM/AM] to select “FM” or “AM”.
Press the numbered buttons to select
the channel.
Alternatively, press [W CH] or [X CH].
To select a 2-digit number
e.g. 12: [S10] l [1] l [2].
INPUT SELECTOR
OPEN/CLOSE
EJECT
DISC CHECK
/REW
H.BASS
VOLUME
FF/
REC
STOP
PLAY
STOP
PLAY
CH
-DEMO
PHONES
DOWN
UP
When a stereo FM broadcast is being received.
ST
TUNED
Automatic presetting
Up to 15 stations can each be set in the FM and AM bands.
1
2
3
Press [FM/AM] to select “FM”.
Press [6] or [5] to tune to the
lowest frequency (“FM 87.9” MHz or
“FM 87.5” MHz).
Press and hold [ENTER].
Release the button when “AUTO” is displayed.
The tuner presets all the stations it can receive into the channels
in ascending order.
≥“SET OK” is displayed when the stations are set. The last
station to be set is then played.
≥“ERROR” is displayed when automatic presetting is
unsuccessful. Preset the channels manually (l right).
4
Repeat steps 1 to 3 to set the AM bands
(the lowest frequency is “AM 520” kHz).
Manual tuning
1
2
Press [FM/AM] to select “FM” or “AM”.
Press [6] or [5] to select the
frequency.
Press and hold [6] or [5] until the frequency starts scrolling
to start automatic tuning. Tuning stops when a station is found.
RQT7921
40
∫ If noise is excessive in FM
Press [PLAY MODE] to display “MONO”.
MONO
Press [PLAY MODE] again to cancel the
mode.
The mode is also canceled when you change
the frequency.
∫ FM frequency step
Main unit only
The step is factory-set to 0.2 MHz, but you can change it to receive
broadcasts allocated in 0.1 MHz steps.
1 Press [INPUT SELECTOR] on the main unit to select “FM”.
2 Press and hold [INPUT SELECTOR].
After a few seconds the display changes to show the current
minimum frequency. Continue to hold the button down. The
minimum frequency changes and the step is changed.
To return to the original step, repeat the above steps.
[Note]
Any FM/AM frequencies preset in channels will be changed by this
procedure. Preset them again.
RQT7921-P_ENG.book
41 ページ
2005年5月25日 水曜日 午後3時24分
Sound field and sound quality
≥When connected with headphones, the following sound field systems
cannot be used. (Excluding Sound Field Control)
≥You may experience a reduction in sound quality when these sound
field systems are used with some sources. If this occurs, turn the
sound field system off.
Sound Field Control
r
Center Focus
(Discs where the dialogue is recorded in the center channel)
You can make the sound of the center speaker
seem like it is coming from within the television.
Press [SHIFT]i[C.FOCUS].
C.F
Changes the sound quality.
SFC
Press [SFC].
Each time you press the button:
FLAT:
Cancel (no effect is added) (factory preset).
HEAVY:
Adds punch to rock.
CLEAR:
Clarifies higher sounds.
SOFT:
For background music.
DISCO:
Reverberates sound to make you feel like you are in a
disco.
LIVE:
Makes vocals more alive.
HALL:
Expands sound to make you feel like you are in a hall.
To check the current setting
Press [SFC].
CENTER FOCUS ON()CENTER FOCUS OFF
≥This does not work when Super Surround is turned on.
≥This will have less effect when Dolby Pro Logic II is turned on.
r
This is one of the ways to get the appropriate surround effect. Adjust
the speaker level to the same level as the front speakers.
≥Dolby Digital and DTS: Turn off the other sound field systems.
≥Dolby Pro Logic II : Press [ÎPLII].
1
While stopped
Press [SHIFT]i[TEST] to output a test
signal.
Super Surround
Lch: Front left
Cch: Center
Rch: Front right
RSch: Right surround
LSch: Left surround
≥There is no output from SW (subwoofer) channel.
Adds surround effects to stereo sound.
Press [SUPER SRND].
S.SRND
Each time you press the button:
MUSIC:
Adds surround effects to
stereo sources.
MOVIE:
Use this mode when playing movie software.
PARTY:
Sound is in stereo regardless of the direction you are
facing.
OFF:
No sound effect.
2
Press [VOLUME, r] or [s] to set the
volume level normally used for listening.
3
Press [3] (increase) or [4] (decrease)
to adjust the speaker level for each
speaker.
≥This does not work when you are playing multi channel audio.
≥You can adjust the volume of the surround speakers to get the best
surround effect (l Right, Speaker level adjustments).
≥When Super Surround is on, Dolby Pro Logic II turns off.
C, RS, LS: j6 dB to i6 dB
(L, R: Only the balance is adjustable.)
≥To adjust the balance of the front speakers
While outputting the test signal, press [2 1].
Dolby Pro Logic II
Change stereo sound to surround sound.
Dolby Pro Logic II is an advanced decoder that derives 5 channel
surround (Left and Right Front, Center, Left and Right Surround) from
any stereo program material, whether or not it has been specifically
Dolby Surround encoded.
Press [ÎPLII].
Speaker level adjustments
PL II
Each time you press the button:
Movie:
Movie software, recorded in
Dolby Surround.
Music:
Stereo sources.
Off:
Cancel.
To stop the test signal
Press [SHIFT]i[TEST] again.
∫ To adjust speaker level during play
(Effective when playing multi-channel audio or Dolby Pro Logic II
is on.)
1
L>C>R>RS>LS>SW
^-----------------------------------------}
SW: Subwoofer
≥You can only adjust SW if the disc includes a subwoofer
channel.
≥S appears instead of RS and LS on the display when “MUSIC”
or “MOVIE” is selected with Super Surround (l Left, Super
Surround). In this case, you can adjust both surround speaker
levels at the same time.
S: `6 dB to i6 dB
≥This works only in DVD/CD mode.
≥“ÎPLII” lights when there is effect.
≥Dolby Pro Logic II for disc media only.
To cancel
Press [ÎPLII] several times.
≥This does not work when playing multi-channel audio.
Software encoded with Dolby Surround can be identified with this
mark (DVD, CD, Video CD, Laser Disc, Video tape).
Press [SHIFT]i[CH SELECT] to select
the speaker.
2
Press [3] (increase) or [4] (decrease)
to adjust the speaker level for each
speaker.
C, RS, LS, SW: j6 dB to i6 dB
(L, R: Only the balance is adjustable.)
≥To adjust the balance of the front speakers
During play, press [2 1].
RQT7921
41
RQT7921-P_ENG.book
42 ページ
2005年5月25日 水曜日 午後3時24分
Other convenient features
Sound field and sound quality
SHIFT
TV
INPUT SELECTOR
DVD/VHS FM/AM
DVD/VHS
DVD
VHS
TV
1
2
3
4
5
6
8
9
VHS
0
DISC
S10
VOLUME
MULTI RE-MASTER MIX 2CH PROGRESSIVE REPEAT
REW PLAY MODE
OPEN/CLOSE/EJECT
QUICK OSD
ZOOM
CDJET
MODE
SHIFT
SLEEP
SLOW/SEARCH
TV VOL
TV VOLSKIP
H.BASS C.FOCUS
TEST
CH SELECT
SUBWOOFER LEVEL SFC
SUPER SRND MUTING
ADVANCE
CM SKIP DISC REVIEW
PROG
SPEED
SHIFT
Press [SHIFT]i[SLEEP] to select the time
(in minutes).
CH
CH
ENTER
SETUP
H.BASS
SUBWOOFER LEVEL
Sleep timer
Turns the unit off after a set time.
VOLUME
7
SLEEP
PL
FM/AM
TUNER
CH
PICTURE MODE
r
SLEEP
PL
QUICK
REPLAY
AUDIO
CANCEL
SLEEP 30_----)SLEEP 60_----)SLEEP 90
^--__ OFF(__ SLEEP 120(__}
MIX 2CH
MUTING
REC
To cancel the timer
Press [SHIFT]i[SLEEP] to select “OFF”.
RESET
TV/VIDEO
To confirm the remaining time
Press [SHIFT]i[SLEEP] again.
SLEEP
To change the setting
Repeat the procedure from the beginning.
r
Enhancing the bass sound
≥The VHS’s timer program recording functions even when the unit is
turned off by the sleep timer.
You can enhance low-frequency sound so that heavy bass sound can
be heard clearly, even if the acoustics of your room are not optimal.
The unit autmatically selects the most suitable setting according to the
type of playing source.
Press [SHIFT]i[H.BASS].
≥When DVD-Video or DVD-RAM is selected
H.BASS ON (factory preset),------.H.BASS OFF
TAL ALL HDCD H.BASS
OG. D.MIX RND A B
CH SELECT
MUTING
Muting
Mutes the sound.
dB w REC
CH
Press [MUTING].
≥When another source is selected
H.BASS OFF (factory preset),------.H.BASS ON
The setting you make is retained, and recalled every time you play the
same type of source.
r
MIX 2CH
ZOOM
Down-mixing
You can output the down-mixed 2 channel signal when necessary
(e.g. when you intend to record 5.1ch sound on other recording
equipment).
Press
[SHIFT]i[MIX 2CH].
To cancel
Press [SHIFT]i[MIX 2CH] again.
≥“MUTING” flashes on the unit’s display.
To cancel
≥Press [MUTING] again or reduce the volume to minimum (– – dB),
then raise it to the required level.
≥Muting is canceled when you switch the unit to standby or turn up the
volume from minimum (– – dB).
Using headphones
1
[Note]
≥This works only when you are playing multiple channel signals.
≥When “D.MIX” flashes on the display, the disc contains multiplechannel signals that cannot be down-mixed. [DVD-A]
Reduce the volume and connect the
headphones (not included).
Headphone plug type: 3.5 mm (1/8z) stereo
VOLUME
Subwoofer level
OPEN/CLOSE
EJECT
DISC CHECK
/REW
H.BASS
VOLUME
FF/
REC
STOP
PLAY
STOP
PLAY
CH
You can adjust the amount of bass. The unit automatically selects the
most suitable setting according to the type of playing source.
-DEMO
PHONES
DOWN
UP
Press
[SUBWOOFER LEVEL].
≥When DVD-Video or DVD-RAM is selected
SUB W 4 (factory preset)>SUB W 1>SUB W 2>SUB W 3
^---------------------------------------------------------------------------------------------}
RQT7921
42
≥When another source is selected
SUB W 2 (factory preset)>SUB W 3>SUB W 4>SUB W 1
^--------------------------------------------------------------------------------------------}
The setting you make is retained, and recalled every time you play the
same type of source.
2
Adjust headphone volume with
[VOLUME].
≥Audio is automatically switched to stereo (2-channel).
[Note]
Avoid listening for prolonged periods of time to prevent hearing
damage.
RQT7921-P_ENG.book
43 ページ
2005年5月25日 水曜日 午後3時24分
Other speaker setup options
Optional connections
∫ Attaching to a wall
Listening to an external source/
Recording to other equipment
1 Drive a screw (not included) into a wall.
2 Attaching 4 rubber pads to the rear of the speaker.
3 Fit the speaker securely onto the screw(s) with the
hole(s).
Audio cable (not included)
White
(L)
Red
(R)
30–35 mm
(13/16 q–13/8q)
‰7.5–9.4 mm
(19/64q– 3/8q)
‰3.0–4.0 mm
(1/8q– 5/32q)
7.0–9.0 mm
(9/32q– 11/32q)
TO
SB-WA830
DVD
A
DVD/VHS
EXT
LOOP
ANT
GND
Wall or pillar
RF IN
75
LOOP
AM
ANT
VIDEO
Y
FM
ANT
[Note]
≥The wall or pillar on which the speakers are to be attached should be
capable of supporting 10 kg (22 Ibs) per screw.
Consult a qualified building contractor when attaching the speakers to
wall. Improper attachment may result in damage to the wall and
speakers.
≥Use of optional speaker cables is recommended for wall-mounted
front speakers. (You can also remove the speaker cables from the
pipes supplied with this system).
DIGITAL
TRANSMITTER
RF OUT
PB/
CB
L
PR/
CR
R
EXT
S-VIDEO COMPONENT
VIDEO OUT
OUT
OUT
IN
A
B
e.g.
Surround speaker
Front speaker
.....
L
Rubber pads
Rubber pads
R
REC
IN
PLAY
OUT
[A] You can record sound from discs, video cassette
tapes, or radio, etc., to a tape deck.
1 Discs
Press [DVD/VHS] to select “DVD/CD” as the source.
Center speaker
Rubber pads
Video cassette tapes
Press [DVD/VHS] to select “VHS” as the source.
In this position, the
speaker will likely fall
if moved to the left or
right.
Radio
Press [FM/AM] to select “FM” or “AM”.
2 Start recording and play.
180 mm
(71/16z)
Move the speaker
so that the screw is
in this position.
∫ Fitting speaker stands (not included)
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance between
screws as shown in the diagram.
≥The stands must be able to support over 10 kg (22 Ibs).
≥The stands must be stable even if the speakers are in a high
position.
e.g.
Refer to the manual of the other unit for details.
[B] You can play back the sound from a tape deck/laser
disc player, etc., through this unit’s speakers.
1
2
3
4
Press [VHS] to put the remote control in VHS mode.
Press [DVD/VHS] to select “VHS” as the source.
Press [W CH] or [X CH] to select “AV” channel.
Start playback from the external source. (For details, refer to
external unit’s operating instructions manual.)
When connecting a record player
We recommend using a record player with a built-in phono equalizer. If
your player doesn’t have a built-in equalizer, connect it first to a
separate equalizer and then to the unit.
Surround speaker
5 mm (3/16q),
pitch 0.8 mm (1/32q)
60 mm (23/8q)
Speaker stand
(not included)
Attach the stands to
these metal screw holes.
Plate thickness plus 7 mm to
10 mm (plus 9/32q to 13/32q)
RQT7921
43
RQT7921-P_ENG.book
44 ページ
2005年5月25日 水曜日 午後3時24分
Optional connections
≥The equipment connections described are examples.
≥Peripheral equipment and optional cables sold separately unless otherwise indicated.
≥Before connection, turn off all equipment and read the appropriate operating instructions.
Connecting a cable TV box/satellite receiver
≥You need to subscribe to a cable TV or satellite TV service, to enjoy viewing their programming.
≥Consult your service provider regarding appropriate cable TV box or satellite receiver.
≥Select the applicable input on your television to view the output from your cable TV box/satellite receiver through this unit.
≥The signal from the cable TV box or satellite receiver passes through this unit to the television even when this unit is turned off.
≥You cannot do a timer recording unless the channel is first selected on the cable TV box or satellite receiver.
‘
To VHF/UHF RF IN
To VIDEO IN
TV
75 ≠ coaxial cable
(Included)
≥You can record and view simultaneously scrambled and
unscrambled channels if connections are made as shown in the
diagram below.
To VIDEO IN
DVD
A
DVD/VHS
EXT
LOOP
ANT
GND
RF IN
DIGITAL
TRANSMITTER
VIDEO
Y
FM
ANT
75
PB/
CB
L
PR/
CR
R
TO
SB-WA830
A
AM
ANT
LOOP
RF OUT
DIGITAL
TRANSMITTER
RF IN
OUT
IN
75
75 ≠ coaxial cable
DVD
DVD/VHS
LOOP
FM
ANT
VIDEO
Y
PB/
CB
RF OUT
AM
ANT
L
PR/
CR
R
EXT
S-VIDEO COMPONENT
VIDEO OUT
OUT
Cable TV box
EXT
LOOP
ANT
GND
EXT
S-VIDEO COMPONENT
VIDEO OUT
OUT
To VHF/UHF RF IN
TV
Video cable
(Included)
TO
SB-WA830
Satellite receiver
OUT
IN
75 ≠ coaxial cable
OUT
OUT
IN
OUT
IN
IN
Cable TV
box
IN
From antenna or
cable TV jack
2-way
splitter
From satellite dish antenna
[Note]
When a home satellite system (Dishnetwork/DSS) is connected, auto
tuning and auto clock setting may not operate properly. Set the clock
manually (l 36).
OUT2 OUT1
IN
OUT
Cable TV box
IN
From cable TV jack
¢ For more information on connections (l 7)
If the antenna connector doesn’t match
∫ Other antenna connections to the unit
∫ Other antenna connections from the unit to
the TV
Use one of the following connections to suit the antenna lead.
≥If your TV has both lead and coaxial VHF terminals, use the lead
connection to minimize signal loss.
Use one of the following connections to suit the antenna terminals on
your TV. Refer to the TV’s operating instructions.
∫ A single twin lead
∫ A twin lead and coaxial plug terminal
from the antenna
(Flat) Twin lead
300 ≠ cable
300–75 ≠ transformer
(not included)
To this unit’s
RF IN terminal
∫ A twin lead and a coaxial cable
from the antenna
VHF/UHF band mixer
(not included)
VHF/UHF band separator
(not included)
UHF
75 ≠ coaxial cable
TV
∫ A twin lead terminal
75–300 ≠ transformer
(not included)
(Flat) Twin lead 300 ≠ cable
75 ≠ coaxial cable
(Round)
75 ≠ coaxial cable
To this unit’s
RF IN terminal
VHF/UHF band mixer
(not included)
To this unit’s
RF IN terminal
75 ≠ coaxial cable
44
VHF
UHF
TV
∫ Multiple antenna terminals
≥Connect to one of ANT terminals, then change the TV’s setting as
necessary.
TV
Split out
ANT 1
75 ≠ coaxial cable
RQT7921
TV
VHF/UHF band separator
(not included)
(Flat) Twin lead
300 ≠ cable
300–75 ≠ transformer
(not included)
VHF or
UHF
∫ Two twin lead terminals
∫ Two twin leads
from the antenna
VHF
ANT 2
RQT7921-P_ENG.book
45 ページ
2005年5月25日 水曜日 午後3時24分
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart
do not solve the problem, refer to the “Customer Services Directory” on page 49 if you reside in the U.S.A., or refer to the “Product information” on
page 50 if you reside in Canada.
Power
Page
No power.
≥Insert the AC power supply cords and system cable securely.
9
The unit is automatically switched
to the standby mode.
≥The Sleep timer was working and had reached the set time limit.
42
Unresponsive or inoperable operation
≥This unit cannot play discs other than the ones listed in these operating instructions.
≥The unit may not be operating properly due to lightning, static electricity or some other
external factor. Turn the unit off and then back to ON. Alternatively, turn the unit off,
disconnect both AC power supply cords, and then reconnect them.
≥Condensation has formed: Wait 1 to 2 hours for it to evaporate.
15
—
No response when remote control
buttons are pressed.
≥Check that the batteries are installed correctly.
≥The batteries are depleted: Replace them with new ones.
≥Point the remote control at the remote control sensor and operate.
11
11
14
Cannot play DVDs.
≥CD Mode is on. Press [CD MODE] to turn CD Mode off.
No picture or sound.
≥Check the video and audio connection.
≥Check the power or input setting of the connected equipment.
≥Check that the DVD-RAM has something recorded on it.
You have forgotten your ratings
password.
Reset all the settings to Factory
Preset.
≥While stopped and “DVD/CD” is the source, press [DVD] and then press and hold [∫] (DVD)
on the main unit and [S10] on the remote control until “Initialized” disappears from the
television. Turn the unit off and on again.
All settings will return to the default values.
—
Cannot operate the DVD.
≥Press [DVD] to switch the remote control mode to DVD.
—
Cannot operate the VHS.
≥Press [VHS] to switch the remote control mode to VHS.
≥The unit is in timer recording standby (“ ” is on on the unit’s display).
≥The remote control and main unit are using different codes. Change the code on the remote
control.
—
32
39
Cannot operate the TV.
≥Press [TV] to switch the remote control mode to TV.
≥Check the TV manufacturer setting.
—
12
Television reception worsens
after connecting the unit.
≥This can occur because the signals are being divided between the unit and the television.
You can solve this with a signal booster, available from audio-visual suppliers. Consult your
dealer if reception does not improve.
—
Cannot eject cassette.
≥The unit is recording or in timer recording standby mode. If you need to eject the tape, press
[ ] first so “ ” goes out.
32
No response when any buttons
are pressed.
—
18
7–10
—
—
Specific operation impossible or incorrect
It takes time before play starts.
[MP3]
≥Play may take time to begin when an MP3 track has still picture data. Even after the track
starts, the correct play time will not be displayed, however this is normal.
—
Folders deeper than the eighth
layer on a data CD are not
displayed correctly.
[WMA] [MP3] [JPEG]
≥Folders deeper than the eighth layer are displayed as the eighth layer.
—
Programmed items are not
played. [DVD-V]
≥Some items will not be played even if you have programmed them.
—
A menu screen appears during
skip or search. [VCD]
≥This is normal for Video CDs.
—
The on-screen menu shows “2”
≥Even if a second soundtrack isn’t recorded, two numbers will normally be shown.
as a soundtrack option when
[SHIFT]i[AUDIO] is pressed, but
the audio does not change. [DVD-A]
—
≥This is normal on DVD-Audio.
—
Subtitle position is wrong.
≥Adjust the position. (“Subtitle Position” in Display Menu)
25
No subtitles.
≥Display the subtitles.
24
The subtitles overlap closed
captions recorded on discs.
≥Clear the subtitles.
24
≥You cannot add markers with DVD-RAM if the disc’s play time doesn’t appear on the unit’s
display.
≥If the disc’s elapsed play time doesn’t appear on the unit’s display, you cannot add markers.
—
Point B is automatically
determined.
≥The end of an item becomes point B when it is reached.
—
A-B repeat is automatically
canceled.
≥A-B repeat is canceled when you press [QUICK REPLAY].
—
Play restarts from the beginning
of the track when soundtrack is
changed. [DVD-A]
Subtitle
Marker
Cannot add markers.
—
A-B repeat
Menu
The Setup menu cannot be
accessed.
≥Select “DVD/CD” as the source.
≥Cancel playmode and CD Mode play.
—
20, 21
RQT7921
45
RQT7921-P_ENG.book
46 ページ
2005年5月25日 水曜日 午後3時24分
Troubleshooting guide
Picture incorrect
Picture distorted.
≥Ensure that the unit is connected directly to the television, and is not connected through an A/
V selector or other equipment.
7
The television may display
incorrectly or colors appear
faded.
≥The unit and television are using different video systems. Use a multi-system or NTSC
television.
≥The system used on the disc doesn’t match your television. PAL discs cannot be played. This
unit converts DVD-Audio recorded in PAL to NTSC for play, however, play may not function
properly.
—
The picture on the television
disappears or stripes appear on
the screen.
≥Mobile telephone chargers can cause some disturbance.
≥If you are using a TV indoor antenna, change to an outdoor antenna.
≥The television antenna wire is too close to the unit. Separate the antenna wire of the
television from the unit.
—
—
—
Picture size doesn’t fit the screen.
≥Change “TV Aspect” in “Video” tab.
≥Change the Zoom setting.
26
19
Menus not displayed correctly.
≥Restore the zoom ratio to a1.00.
≥Set “Subtitle Position” in Display Menu to “0”.
19
25
Auto zoom function does not
work well.
≥Turn off TV’s zoom function.
≥Use the other preset aspect ratios or manual adjustment.
≥Zoom function may not work well, especially in dark scenes and may not work depending on
the type of disc.
—
19
—
The picture is noisy or is in black
and white.
Horizontal bars or lines run down
the screen.
≥Adjust the tracking.
≥Make sure the television’s input setting is correct.
≥The video heads are dirty: clean them with a head-cleaning cassette.
≥The video heads are worn: consult your dealer.
≥The tape is old or damaged.
≥You cannot correctly play tapes recorded with other systems (e.g., PAL).
29
—
47
—
—
—
Picture is distorted when stilled
or during slow-motion.
≥Some distortion is normal with tapes recorded using VP mode.
—
The blue back appears during
play.
≥You are playing a blank or poor quality part of the tape.
≥You can damage the unit if you play dirty or damaged tapes and this can cause the blue back
to appear. Consult your dealer.
—
—
The picture jiggles.
≥Adjust the vertical hold.
29
There is ghosting when
progressive output is on.
≥This problem is caused by the editing method or material used on DVD-Video, but should be
corrected if you use interlace output. Change “Video Output Mode” in Picture Menu to “480i”.
25
Pictures not in progressive
output.
≥If the unit is connected to the television through VIDEO OUT or S-VIDEO OUT output will be
interlace.
≥Press [SHIFT]i[PROGRESSIVE]. Or select “480p” in “Video Output Mode” in Picture Menu.
—
—
Disc picture incorrect
VHS picture incorrect
Progressive video
Closed captions not displayed.
17, 25
≥When progressive output is on, closed captions will not be displayed.
—
Sound incorrect
Sound distorted.
≥Noise may occur when playing WMA files.
—
Effects do not work.
≥Some audio effects do not work or have less effect with some discs.
≥Multi Re-master and Dolby Pro Logic II do not work if you have changed the play speed.
≥When connected with headphones, only Sound Field Control is effective.
—
—
—
Humming heard during play.
≥An AC power supply cord or fluorescent light is near the subwoofer. Keep other appliances
and cords away from the subwoofer.
—
There is noise when playing a
video tape.
≥Adjust the tracking.
≥The tape is old or damaged.
29
—
≥Adjust the position of the FM or AM antenna.
≥Use an outdoor antenna.
—
10
Listening to the radio
Noise is heard.
“ST” flickers or doesn’t light.
Sound is distorted.
A beat sound is heard.
≥Turn the television off or separate it from the unit.
—
A low hum is heard during AM
broadcasts.
≥Separate the antenna from other cables.
—
“
” flashes when I try to start
recording.
Cannot record.
≥If the erasure prevention tab has been removed, cover the hole with adhesive tape.
3
Timer recording doesn’t record a
program correctly.
≥Check the clock and calendar.
≥Set the channel and start and end times correctly.
≥Be sure to press [ ] after programming to put the unit in timer recording standby.
≥Program times may be overlapped.
—
—
32
—
Cannot record from other
equipment.
≥Press [W CH] or [X CH] to select “AV”.
≥Check the connections to the other equipment.
31
31
Black bands appear in the
recording.
≥Move the other equipment away from the television as it may be picking up interference.
—
The copy of a videotape or DVD is
very poor.
≥This unit complies with industry standards regarding the recording and duplication of copyprotected material. This includes commercial videotapes and DVDs. Consequently, copying
not only infringes copyright laws but also presents serious technical difficulties. Even in cases
where a copy can be made, the quality will be very poor.
—
Recording
RQT7921
46
RQT7921-P_ENG.book
47 ページ
2005年5月25日 水曜日 午後3時24分
Troubleshooting guide
Unit display
The unit’s display lights and
changes when the unit is turned
off.
≥Demo function is on. Press and hold [–DEMO] on the main unit to select “DEMO OFF”.
9
The unit’s display disappears or
fades once the unit is turned off.
≥The DISPLAY setting is set to “DIM” or “OFF” under OPTION from the VHS MENU. Select
“BRIGHT” if you want the display bright all the time.
38
The tape counter isn’t changing.
≥The tape counter does not change while playing unrecorded parts.
—
≥The display also appears like this if the tape is dirty or damaged. Consult your dealer if this is
the case.
—
“NoPLAY”
≥You inserted a disc the unit cannot play; insert one it can.
≥You inserted a blank disc.
15
—
“NoDISC”
≥You haven’t inserted a disc; insert one.
≥You haven’t inserted the disc correctly; insert it correctly.
—
16
“F61”
≥Check and correct the speaker cord connections.
If this does not fix the problem, there is a power supply problem. Consult the dealer.
5, 7
“U11”
≥Disc is dirty. Wipe it clean.
15
“U15”
≥You inserted a DVD-R that has not been finalized.
15
“ERROR”
≥Incorrect operation performed. Read the instructions and try again.
—
“REMOTE”
≥The remote control and main unit are using different codes. Change the code on the remote
control.
38
“H∑∑”, “F∑∑”
∑∑ stands for a number.
≥Trouble may have occurred. The number following “H” or “F” depends on the status of the
unit. Turn the unit off and then back to ON. Alternatively, turn the unit off, disconnect both AC
power supply cords, and then reconnect them.
≥If the service numbers fail to clear, note the service number and contact a qualified service
person.
—
“[W]” is flashing.
(When using optional SH-FX50)
≥There is no link between the main unit and the receiver. Check that the receiver is turned on.
≥Ensure that the digital transmitter is fully inserted into the slot of the main unit.
≥This is normal when you set VHS audio type to mono sound mode.
—
—
9, 35
“W01” is flashing.
(When using optional SH-FX50)
≥Re-initialize the main unit: While stopped and “DVD/CD” is the source, press and hold [∫] on
the main unit and [S10] on the remote control until “Initialized” disappears from the television.
Turn the unit off and on again. If the problem persists, contact a qualified service person.
—
≥The operation is prohibited by the unit or disc.
—
“Cannot display group xx, content
xx”
≥You are trying to display incompatible contents.
23
“This disc may not be played in
your region”
≥You can only play DVD-Video if their region number is “1” or if the DVD-Video is marked
“ALL”.
No on-screen display.
≥Select “On” in “On-Screen Messages” in “Display” tab.
≥Select “ON” in “OSD” of “OPTION” setting in the VHS MENU.
27
38
The menu is displayed in a
different language.
≥Select the preferred language in “Menus” in “Disc” tab.
≥Select the preferred language in “LANGUAGE” in the VHS MENU.
26
36
—
Television display
“
”
Cover
Maintenance
Clean this unit with a soft, dry cloth.
Cleaning the video heads
≥Never use alcohol, paint thinner or benzine to clean this unit.
≥Before using chemically treated cloth, read the instructions that
came with the cloth carefully.
Dirt on the video heads can cause poor recording and play.
≥Do not use commercially available lens cleaners as they may
cause malfunction. (Cleaning of the lens is generally not necessary
although this depends on the operating environment.)
Before moving the unit, ensure the disc trays are empty.
Failure to do so will risk severely damaging the discs and the unit.
To clean the heads, insert and eject a tape 5 to 10 times in
succession.
If the picture does not improve, use an optional head-cleaning
cassette (part number NV-TCL30PT). If the problem persists, seek
advice from a qualified service person.
RQT7921
47
RQT7921-P_ENG.book
48 ページ
2005年5月25日 水曜日 午後3時24分
Specifications
∫ AMPLIFIER SECTION
[System_SC-HT830V]
RMS output power, 10 % total harmonic distortion
1 kHz FL/FR
70 W per channel 4 ≠
1 kHz Center
260 W per channel 4 ≠
1 kHz SL/SR
70 W per channel 4 ≠
100 Hz Subwoofer
260 W per channel 4 ≠
Total RMS Dolby Digital mode power
800 W
FTC output power, 1 % total harmonic distortion
120 Hz–20 kHz FL/FR
45 W per channel 4 ≠
120 Hz–20 kHz Center
140 W per channel 4 ≠
120 Hz–20 kHz SL/SR
45 W per channel 4 ≠
45 Hz–120 Hz Subwoofer
150 W per channel 4 ≠
Total FTC power in Dolby Digital mode (Band 1 % THD)
470 W
Input sensitivity
AUX
250 mV
Input impedance
20 k≠
[System_SC-HT833V]
RMS output power, 10 % total harmonic distortion
1 kHz FL/FR
65 W per channel 4 ≠
1 kHz Center
240 W per channel 4 ≠
1 kHz SL/SR
65 W per channel 4 ≠
100 Hz Subwoofer
250 W per channel 4 ≠
Total RMS Dolby Digital mode power
750 W
FTC output power, 1 % total harmonic distortion
120 Hz–20 kHz FL/FR
42 W per channel 4 ≠
120 Hz–20 kHz Center
128 W per channel 4 ≠
120 Hz–20 kHz SL/SR
42 W per channel 4 ≠
45 Hz–120 Hz Subwoofer
144 W per channel 4 ≠
Total FTC power in Dolby Digital mode (Band 1 % THD)
440 W
Input sensitivity
AUX
250 mV
Input impedance
20 k≠
∫ SPEAKER SECTION
[Front\speakers\SB-FS730]
Type
Speaker unit(s)
1. FULL RANGE
2. TWEETER
Input power (IEC)
Output sound pressure
Cross over frequency
Frequency range
2 way, 2 speaker system, Bass reflex
6.5 cm (21/2q), cone type, 4 ≠
6 cm (23/8q), cone type, 4 ≠
70 W (Music)
81 dB/W (1.0 m)
6 kHz
80 Hz–41 kHz (j16 dB)
95 Hz–40 kHz (j10 dB)
Dimensions
218 mm (W) k984–1080 mm (H) k241 mm (D)
(89/16qk383/4q–421/2qk91/2q)
Mass
2.66 kg (5.86 Ibs)
[Center\speaker\SB-PC730]
Type
2 way, 3 speaker system, Bass reflex
Speaker unit(s)
1. FULL RANGE
6.5 cm (21/2q), cone type, 4 ≠
2. SUPER TWEETER
Piezo type, 4 ≠
Input power (IEC)
260 W (Music)
Output sound pressure
83 dB/W (1.0 m)
Cross over frequency
10 kHz
Frequency range
103 Hz–25 kHz (j16 dB)
116 Hz–22 kHz (j10 dB)
Dimensions
320 mm (W) k84 mm (H) k95.5 mm (D)
(125/8qk35/16qk33/4q)
Mass
1.29 kg (2.84 Ibs)
[Surround\speakers\SB-FS731]
Type
1 way, 1 speaker system, Bass reflex
Speaker unit(s)
1. FULL RANGE
6.5 cm (21/2q), cone type, 4 ≠
Input power (IEC)
70 W (Music)
Output sound pressure
80 dB/W (1.0 m)
Frequency range
88 Hz–25 kHz (j16 dB)
100 Hz–22 kHz (j10 dB)
Dimensions
90 mm (W) k191 mm (H) k117 mm (D)
(39/16qk71/2qk45/8q)
Mass
0.72 kg (1.59 Ibs)
[Active\subwoofer\SB-WA830,\SB-WA833]
Type
1 way, 2 speaker system, Bass reflex
Speaker unit(s)
Woofer
13 cm (51/8q), cone type, 4 ≠
Output sound pressure
80 dB/W (1.0 m)
Frequency range
40 Hz–220 Hz (j16 dB)
45 Hz–180 Hz (j10 dB)
Dimensions
200 mm (W) k367.5 mm (H) k492 mm (D)
(77/8qk147/16qk193/8q)
Mass
11.3 kg (24.95 Ibs)
∫ DISC SECTION
RQT7921
48
Discs played [8 cm (3z) or 12 cm (5z)]
(1) DVD-RAM (DVD-VR formatted discs, JPEG formatted discs)
(2) DVD-Audio
(3) DVD-Video
(4) DVD-R, DVD-RW (DVD-Video compatible)
+R, +RW (Video compatible)
(5) CD-Audio (CD-DA)
(6) Video CD
(7) SVCD (Conforming to IEC62107)
(8) CD-R/CD-RW (CD-DA, Video-CD, SVCD, MP3, WMA, JPEG
formatted discs)
(9) MP3/WMA
≥Maximum number of tracks and groups recognizable:
4000 tracks and 400 groups
≥Compatible compression rate:
MP3: between 32 kbps and 320 kbps
WMA: between 48 kbps and 320 kbps
(10) JPEG
≥Exif Ver 2.1 JPEG Baseline files
≥Maximum number of pictures and groups recognizable:
4000 pictures and 400 groups
≥Picture resolution: between 320k240 and 6144k4096 pixels
(sub sampling is 4:2:2 or 4:2:0)
(11) HighMATTM Level 2 (Audio and Image)
Video
Signal system
NTSC
Output level
Composite video: 1 Vp-p (75 ≠)
S-video: 1 Vp-p (Y), 0.286 Vp-p (C) (75 ≠)
Component video: 1 Vp-p (Y) (75 ≠)
0.7 Vp-p (PB/CB, PR/CR) (75 ≠)
Audio
Sampling frequency
CD
44.1 kHz
MP3
32 kHz, 44.1 kHz, 48 kHz
DVD VIDEO
48 kHz, 96 kHz
DVD-Audio
192 kHz
Decoding
16/20/24 bit linear
Pick up
Beam Source
Semiconductor Laser
Wavelength
CD/VCD
785 nm
DVD
662 nm
Number of channels
5.1 ch (FL, FR, SL, SR, C, SW)
Frequency response
20 Hz–20 kHz (i1, j2 dB)
∫ VHS SECTION
Video recording system
Video heads
Audio heads
Tape speed
Tape format
Recording/playback time
FF/REW time
2 rotary heads, helical scanning system
4 heads
2 heads
SP: 33.35 mm/s, EP: 11.12 mm/s
VHS tape
SP: 120 min. with NV-T120
EP: 360 min. with NV-T120
Approx. 54 s. with NV-T120 (FF/REW)
Approx. 36 s. with NV-T120 (JET REW)
VIDEO
Television system
EIA: Standard (525 lines, 60 fields),
NTSC color signal
Modulation system
Luminance: FM azimuth recording
Color signal: converted subcarrier phase shift recording
Input level
VIDEO IN: 1 Vp-p, 75 ≠
Output level
VIDEO OUT: 1 Vp-p, 75 ≠
Antenna receive input
VHF 2–13 CH, 75 ≠
UHF 14–69 CH, 75 ≠
CATV 5A and A-5–EEE CH, 75 ≠
AUDIO
Input level
AUDIO IN (PHONO): –10 dBV, 47 k≠
Output level
AUDIO OUT (PHONO): –8 dBV, 1 k≠
Audio track
1 track (normal-mono only),
2 channels (Hi-Fi sound stereo)
Video horizontal resolution
Color: more than 200 lines
Signal-to-Noise ratio
Video: more than 40 dB/SP
Audio: more than 60 dB/Hi-Fi
Audio frequency response
20 Hz–20 kHz/Hi-Fi
Wow and flutter
0.005 %
∫ FM TUNER SECTION
Frequency range
Sensitivity
S/N 26 dB
Antenna terminals
Preset station
87.9–107.9 MHz (200 kHz step)
87.5–108.0 MHz (100 kHz step)
2.5 ¨V (IHF)
2.2 ¨V
75 ≠ (unbalanced)
15
∫ AM TUNER SECTION
Frequency range
520–1710 kHz (10 kHz step)
AM Sensitivity S/N 20 dB at 1000 kHz
560 ¨V/m
Preset station
15
∫ GENERAL
RF converter
Not provided
Power supply
AC 120 V, 60 Hz
Power consumption
Main unit
38 W
Subwoofer [SB-WA830,\SB-WA833]
340 W
Dimensions
430 mm (W) k105 mm (H) k354 mm (D)
(1615/16qk41/8qk1315/16q)
Mass
4.5 kg (9.92 Ibs)
Power consumption in standby mode (when Demo function is off)
BRIGHT mode
Approx. 3.7 W (main unit) + 0 W (subwoofer)
DIM mode
Approx. 3.4 W (main unit) + 0 W (subwoofer)
OFF mode
Approx. 1.9 W (main unit) + 0 W (subwoofer)
[Note]
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
RQT7921-P_ENG.book
49 ページ
2005年5月25日 水曜日 午後3時24分
Limited Warranty (ONLY FOR U.S.A.)
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5
San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Panasonic Audio Products Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship,
Panasonic Consumer Electronics Company or Panasonic Puerto Rico, Inc. (collectively
referred to as “the warrantor”) will, for the length of the period indicated on the chart below,
which starts with the date of original purchase (“warranty period”), at its option either (a) repair
your product with new or refurbished parts, or (b) replace it with a new or a refurbished
product. The decision to repair or replace will be made by the warrantor.
Product or Part Name
Parts
Labor
Audio Products (except items listed below)
One (1) year
One (1) year
USB Reader-Writer, Personal Computer
Card Adapters
(in exchange for defective item)
One (1) year
Not Applicable
Accessories: Headphones, Cartridges,
Microphones, Adapters
Ninety (90) days
Ninety (90) days
Rechargeable Batteries, DVD-R/-RAM
Discs (in exchange for defective item)
Ten (10) days
Not Applicable
SD Memory Cards, Rechargeable Battery
Packs (in exchange for defective item)
Ninety (90) days
Not Applicable
During the “Labor” warranty period there will be no charge for labor. During the “Parts”
warranty period, there will be no charge for parts. You must carry-in or mail-in your product
during the warranty period. If non-rechargeable batteries are included, they are not warranted.
This warranty only applies to products purchased and serviced in the United States or Puerto
Rico. This warranty is extended only to the original purchaser of a new product which was not
sold “as is”. A purchase receipt or other proof of the original purchase date is required for
warranty service.
Carry-In or Mail-In Service
For Carry-In or Mail-In Service in the United States call 1-800-211-PANA (1-800-211-7262) or
visit Panasonic web site: http://www.panasonic.com
For assistance in Puerto Rico call Panasonic Puerto Rico, Inc. (787)-750-4300 or fax
(787)-768-2910.
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES
NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT
COVER damages which occurred in shipment, or failures which are caused by products not
supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect,
mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment
of consumer controls, improper maintenance, power line surge, lightning damage,
modification, or commercial use (such as in a hotel, office, restaurant, or other business),
rental use of the product, service by anyone other than a Factory Servicenter or other
Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED
WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR
ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes
damages for lost time, travel to and from the servicer, loss of media or images, data or other
memory content. The items listed are not exclusive, but are for illustration only.) ALL
EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or
limitations on how long an implied warranty lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary
from state to state. If a problem with this product develops during or after the warranty period,
you may contact your dealer or Servicenter. If the problem is not handled to your satisfaction,
then write to the warrantor’s Consumer Affairs Department at the addresses listed for the
warrantor.
PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY ARE
YOUR RESPONSIBILITY.
Customer Services Directory
Obtain Product Information and Operating Assistance; locate your nearest Dealer or Servicenter; purchase Parts and
Accessories; or make Customer Service and Literature requests by visiting our Web Site at:
http://www.panasonic.com/consumersupport
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262),
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.
For hearing or speech impaired TTY users, TTY : 1-877-833-8855
Accessory Purchases
Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at:
http://www.pasc.panasonic.com
or, send your request by E-mail to:
[email protected]
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday – Friday 9 am to 8 pm, EST.)
Panasonic Services Company
20421 84th Avenue South, Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)
For hearing or speech impaired TTY users, TTY : 1-866-605-1277
Service in Puerto Rico
Panasonic Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Phone (787)750-4300, Fax (787)768-2910
F1104
RQT7921
49
RQT7921-P_ENG.book
50 ページ
2005年5月25日 水曜日 午後3時24分
Limited Warranty (ONLY FOR CANADA)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC/TECHNICS PRODUCT—LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect, or at its
option, replace the product for a period as stated below from the date of original purchase.
Technics Audio Product
One (1) year, parts and labour
Panasonic Audio & DVD Product
One (1) year, parts and labour
Accessories including rechargeable batteries
Ninety (90) days
LIMITATIONS AND EXCLUSIONS
This warranty does not apply to products purchased outside Canada or to any product which has been improperly installed, subjected to usage
for which the product was not designed, misused or abused, damaged during shipping, or which has been altered or repaired in any way that
affects the reliability or detracts from the performance, nor does it cover any product which is used commercially. Dry cell batteries are also
excluded from coverage under this warranty.
This warranty is extended to the original end user purchaser only. A purchase receipt or other proof of date of original purchase is required before
warranty service is performed.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES.
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied
warranties, so the above limitations and exclusions may not be applicable.
WARRANTY SERVICE
For product operation and information assistance, please contact your Dealer or our Customer Care Centre at: Telephone #: (905) 624-5505
Fax #: (905) 238-2360 Web: www.panasonic.ca
For product repairs, please contact one of the following:
≥Your Dealer who will inform you of an authorized Servicentre nearest you.
≥Our Customer Care Centre at (905) 624-5505 or www.panasonic.ca
≥A Panasonic Factory Servicentre listed below:
Richmond,
British Columbia
Calgary, Alberta
Mississauga, Ontario
Lachine, Québec
Panasonic Canada Inc.
12111 Riverside Way
Richmond, BC
V6W 1K8
Tel: (604) 278-4211
Fax: (604) 278-5627
Panasonic Canada Inc.
6835-8th St. N. E.
Calgary, AB
T2E 7H7
Tel: (403) 295-3955
Fax: (403) 274-5493
Panasonic Canada Inc.
5770 Ambler Dr.
Mississauga, ON
L4W 2T3
Tel: (905) 624-8447
Fax: (905) 238-2418
Panasonic Canada Inc.
3075, rue Louis A. Amos
Lachine, QC
H8T 1C4
Tel: (514) 633-8684
Fax: (514) 633-8020
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the original carton.
Include details of the defect claimed, and proof of date of original purchase.
Product Service
1. Damage requiring service—The unit should be serviced by qualified service personnel if:
(a) The AC power supply cord or AC adaptor has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked change in performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing—Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized
servicing personnel.
3. Replacement parts—When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same
characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.
4. Safety check—After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.
The servicer will require all components to service your system.
Therefore, should service ever be necessary, be sure to bring the entire system.
Product information
For product information or assistance with product operation:
In the U.S.A., refer to “Customer Services Directory” on page 49.
In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505, or visit the website (www.panasonic.ca), or an
authorized Servicentre closest to you.
RQT7921
50
RQT7921-P_ENG.book
51 ページ
2005年5月25日 水曜日 午後3時24分
Index
Common
Batteries........................................................................................ 11
Center Focus ................................................................................ 41
Cleaning
Discs ......................................................................................... 15
Main unit .................................................................................. 47
Video heads............................................................................. 47
Connection
Antennas.............................................................................. 7, 44
Cable TV .................................................................................. 44
LINE IN/OUT...................................................................... 31, 43
Optional antenna connection .................................................... 44
Speakers................................................................................ 5, 6
Subwoofer.................................................................................. 7
Television ................................................................................... 8
Demonstration................................................................................. 9
Dolby Pro Logic II ......................................................................... 41
Down-mixing ................................................................................. 42
Headphones.................................................................................. 42
H. Bass .......................................................................................... 42
Muting ........................................................................................... 42
Remote control mode.................................................................... 13
Sleep timer.................................................................................... 42
Sound field control ........................................................................ 41
Source selector ....................................................................... 13, 14
Speaker level adjustments ............................................................ 41
Subwoofer level............................................................................. 42
Super Surround............................................................................. 41
DVD
Advanced Disc Review .................................................................. 18
A-B repeat..................................................................................... 25
CD mode....................................................................................... 18
CM skip .......................................................................................... 18
COMPONENT VIDEO .................................................................... 8
Data discs ..................................................................................... 22
Dialogue Enhancer ....................................................................... 25
Disc information ............................................................................. 18
HDCD............................................................................................ 15
HighMAT™.............................................................................. 15, 23
JPEG............................................................................................. 23
Marker..................................................................................... 24, 25
MP3............................................................................................... 23
Multi Re-master............................................................................. 21
Navigation menus ......................................................................... 22
On-Screen Menu..................................................................... 24, 25
Picture mode................................................................................. 25
Play list.......................................................................................... 23
Play speed .................................................................................... 25
Program play.................................................................................. 20
Progressive ............................................................................... 8, 17
QUICK OSD................................................................................... 18
Quick replay .................................................................................. 18
QUICK SETUP........................................................................ 12, 27
Random play ................................................................................. 21
Ratings.......................................................................................... 26
Region number ......................................................................... Cover
Repeat play ................................................................................... 19
Rotate picture................................................................................ 24
Sampling frequency ....................................................................... 21
Settings ................................................................................... 26, 27
Speaker delay time ....................................................................... 27
Subtitle ........................................................................................... 24
S-VIDEO ......................................................................................... 8
WMA ....................................................................................... 22, 23
Zoom............................................................................................. 19
VHS
Auto bilingual choice function ....................................................... 39
Categories..................................................................................... 35
Clock setting
Auto clock setting............................................................... 11, 36
Manual clock setting ................................................................ 36
Jet Navigator............................................................................ 34, 38
Jet rewind...................................................................................... 28
Jet search ............................................................................... 28, 38
MTS .............................................................................................. 38
On-screen display ......................................................................... 35
Picture mode................................................................................. 29
Recording
LINE IN .................................................................................... 31
Timer recording........................................................................ 32
TV program .............................................................................. 30
REMOTE CONTROL .................................................................... 39
Repeat play ................................................................................... 29
SAP............................................................................................... 39
Settings .................................................................................... 36–39
SQPB .............................................................................................. 3
Tape counter ................................................................................. 35
Tape length ................................................................................... 38
Tape speed
Auto SP/EP change ................................................................. 33
EP ............................................................................................ 30
LP ............................................................................................ 30
SP ............................................................................................ 30
VP ............................................................................................ 30
Tape’s tab........................................................................................ 3
Tracking......................................................................................... 29
TV channel tuning
Antenna system ....................................................................... 37
Auto tuning............................................................................... 37
Manual tuning .......................................................................... 37
Plug-in Auto Tuning.................................................................. 11
Vertical locking adjustment ........................................................... 29
VHS Index Search System (VISS) ................................................ 35
TUNER
AM
Antenna connection ................................................................... 9
FM
Antenna connection ............................................................. 9, 10
Antenna plug............................................................................ 10
Frequency step ........................................................................ 40
TV
Connection...................................................................................... 7
TV manufacturer setting................................................................ 12
TV operation ................................................................................. 12
RQT7921
51
RQT7921-P_ENG.book
52 ページ
2005年5月25日 水曜日 午後3時24分
Listening caution
EST. 1924
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to
consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s
Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come
through loud and clear without annoying blaring or distortion—and, most importantly, without affecting your sensitive hearing.
We recommend that you avoid prolonged exposure to excessive noise.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of sound. So what sounds “normal” can actually be
loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
≥Start your volume control at a low setting.
≥Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
≥Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening for a lifetime.
Accessories
Please check and identify the supplied accessories.
Use numbers indicated in parentheses when asking
for replacement parts. (Product numbers correct as of
December 2004. These may be subject to change.)
(Only for U.S.A.)
To order accessories, refer to “Accessory Purchases” on page 49.
(Only for Canada)
To order accessories, call the dealer from whom you have made
your purchase.
∏ 1 Remote control
(EUR7722XJ0)
∏ 2 Batteries
for remote control
∏ 2 AC power supply cords
(K2CB2CB00006)
∏ 1 AM loop antenna
(N1DAAAA00002)
∏ 1 FM indoor antenna
(RSA0007-L)
∏ 1 Video cable
(RJL1P016B15A)
∏ 1 75 ≠ coaxial cable
(VJA1125)
∏ 1 System cable
(K1HA25HA0001)
∏ 3 Speaker cables
1a4 m (13 foot) cables
(REEX0449B-1K)
2a10 m (33 foot) cables
(REEX0449G-1K)
∏ 1 Sheet of speaker-cable
stickers
∏ 2 Pipes A
(RYQV0057-1)
∏ 2 Pipes B
(RMAV0033-S)
Panasonic Consumer
Electronics Company, Division
of Panasonic Corporation of
North America
∏ 2 Brackets
(RMAV0032-S)
∏ 4 Washer screws
(XTW5+10LFJ)
∏ 4 Bracket screws
(XSN5+10FN)
∏ 2 Small screws
(XTB3+8FFJ)
∏ 20 Rubber pads
(RKA0072-KJ)
User memo:
DATE OF PURCHASE ________________________________
DEALER NAME _____________________________________
DEALER ADDRESS __________________________________
___________________________________________________
TELEPHONE NUMBER _______________________________
The model number and serial number of this product can be found
on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
future reference.
MODEL NUMBER
SERIAL NUMBER
Panasonic Puerto Rico, Inc.
Panasonic Canada Inc.
Ave. 65 de Infantería, Km. 9.5
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3
www.panasonic.ca
One Panasonic Way, Secaucus,
New Jersey 07094
http://www.panasonic.com
C 2004 Matsushita Electric Industrial Co., Ltd.
Printed in Malaysia
∏ 2 Bases
(RYQV0058-S)
p
RQT7921-4P
F1204Ya4055
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement