Panasonic CQC1300AN Operating Instructions

MP3 WMA CD Player/Receiver with CD Changer Control
CQ-C1400N
MP3 WMA CD Player/Receiver
CQ-C1300AN/C1300GN
(CQ-C1400N)
Operating Instructions
Bedienungsanleitung
Manuel d’instructions
Gebruiksaanwijzing
Bruksanvisning
Manuale di istruzioni
Manual de Instrucciones
Instrukcja ob¬ugi
TEXT
Matsushita Electric Industrial Co., Ltd.
Web Site : http://www.panasonic.co.jp/global/
YEFM284135 ND1203-0
Printed in China
¡Please read these instructions carefully before using this product and keep this manual for future reference.
¡Bitte lesen Sie diese Bedienungsanleitung vor der Verwendung dieses Produktes aufmerksam durch und bewahren Sie sie danach
für spätere Nachschlagzwecke sorgfältig auf.
¡Prière de lire ces instructions attentivement avant d’utiliser le produit et garder ce manuel pour l’utilisation ultérieure.
¡Leest u deze instructie alstublieft zorgvuldig door voor u dit product in gebruik neemt en bewaar deze handleiding voor later gebruik.
¡Läs igenom denna bruksanvisning noga innan produkten tas i bruk. Spara bruksanvisningen för framtida behov.
¡Si prega di leggere attentamente queste istruzioni prima di usare questo prodotto e di conservare questo manuale per usi futuri.
¡Lea con atención estas instrucciones antes de utilizar el producto y guarde este manual para poderlo consultar en el futuro.
¡Przeczytaj uwazænie instrukcjeç obs¬ugi przed rozpoczeçciem uzæywania urzaçdzenia i zachowaj jaç do uzæytku w przysz¬oóci.
E
N
G
L
I
S
H
Introduction
Einleitung
CQ-C1400N
CQ-C1400N
MP3 WMA CD Player/Receiver with CD Changer Control
MP3 WMA/CD-Player/Receiver mit CD-Wechslersteuerung
CQ-C1300AN/C1300GN
CQ-C1300AN/C1300GN
MP3 WMA CD Player/Receiver
CD-Player/Receiver mit MP3/WMA-Wiedergabe
Contents
Inhaltsverzeichnis
Precautions .................................................. 10
Features ........................................................ 10
Accessories .................................................. 11
Remote Control Unit (Option) ..................... 11
General ......................................................... 12
Radio ............................................................. 14
Radio Data System (RDS) ........................... 16
CD and MP3/WMA ........................................ 22
CD Player ...................................................... 23
MP3/WMA Player .......................................... 24
CD Changer Control .................................... 28
Audio Setting ............................................... 30
Anti-Theft System ........................................ 32
Fuse .............................................................. 33
Maintenance ................................................. 33
Notes on Discs ............................................. 33
Troubleshooting ........................................... 34
Specifications .............................................. 39
Vorsichtsmaßnahmen ................................. 40
Merkmale ...................................................... 40
Zubehör ........................................................ 41
Fernbedienung (Option)............................... 41
Allgemeines .................................................. 42
Radio ............................................................. 44
Radio-Daten-System (RDS)-Empfang ........ 46
Steuerung des CD-Wechslers .................... 58
Audio-Einstellung ........................................ 60
Diebstahlschutz ........................................... 62
Sicherung ..................................................... 63
Pflege ............................................................ 63
Hinweise zu den Discs ................................. 63
Störungsbeseitigung ................................... 64
Technische Daten ........................................ 69
CD-Spieler .................................................... 53
Laserprodukte
Label Indications and Their Locations
LASER RADIATION
WHEN OPEN.
DO NOT STARE INTO BEAM.
MP3/WMA-Spieler ........................................ 54
CD und MP3/WMA ........................................ 52
Laser Product
CAUTION
D
E
U
T
S
C
H
Warnetiketten und deren Anbringungsort
CLASS 1 LASER PRODUCT
¡APPREIL À LASER DE CLASSE
¡KLASS 1 LASER APPARAT
¡LUOKAN 1 LASERPLAITE
Laserprodukt der Klasse 1
¡APPREIL À LASER DE CLASSE
¡KLASS 1 LASER APPARAT
¡LUOKAN 1 LASERPLAITE
VORSICHT
LASERSTRAHLUNG,
WENN ABDECKUNG GEÖFFNET.
NICHT IN DEN STRAHL BLICKEN.
Warnzeichen
Caution Label
CAUTION LASER RADIATION WHEN OPEN.
DO NOT STARE INTO
BEAM.
Caution: This product utilizes a laser.
Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
Laser products:
Wave Length: 780 nm
Laser Power: No hazardous radiation is emitted with safety protection.
Do not take apart this unit or attempt to make any changes
yourself.
This unit is a very intricate device that uses a laser pickup to retrieve
information from the surface of compact discs. The laser is carefully
shielded so that its rays remain inside the cabinet.
Therefore, never try to disassemble the player or alter any of its parts
since you may be exposed to laser rays and dangerous voltages.
2
CQ-C1400N/1300AN/1300GN
VORSICHT LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET.
NICHT IN DEN STRAHL
BLICKEN.
ATTENTION RAYONNEMENT LASER EN
CAS D'OUVERTURE.
NE PAS REGARDER
DANS LE FAISCEAU.
ADVARSEL LASERSTRÅLING VED ÅBNING.
SE IKKE IND I
STRÅLEN.
CAUTION LASER RADIATION WHEN OPEN.
DO NOT STARE INTO
BEAM.
VARO! AVATTAESSA
OLET ALTTIINA LASERSÄTEILYLLE.
ÄLÄ TUIJOTA
SÄTEESEEN.
V A R N I N G LASERSTRÅLNING NÄR DENNA
DEL ÄR ÖPPNAD.
STIRRA EJ IN I
STRÅLEN.
ADVARSEL LASERSTRÅLING NÅR DEKSEL
ÅPNES.
STIRR IKKE INN I
STRÅLEN.
Deck Ass’y
(Upper Side)
Vorsicht: Dieses Produkt verwendet Laserstrahlung.
Die Verwendung und Einstellung von Reglern bzw. die Ausführung
von anderen als in dieser Bedienungsanleitung beschriebenen
Vorgängen kann zu gefährlicher Laserstrahlung führen.
Laserprodukte:
Wellenlänge:
780 nm
Laserleistung:
Bei intakter Schutzvorrichtung entweicht keine
gefährliche Laserstrahlung.
VORSICHT LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET.
NICHT IN DEN STRAHL
BLICKEN.
ATTENTION RAYONNEMENT LASER EN
CAS D'OUVERTURE.
NE PAS REGARDER
DANS LE FAISCEAU.
ADVARSEL LASERSTRÅLING VED ÅBNING.
SE IKKE IND I
STRÅLEN.
Versuchen Sie niemals ein Zerlegen dieses Gerätes oder
eigene Modifikationen.
Dieses Gerät verwendet Laserstrahlung zum Abtasten der Informationen
von der Oberfläche der Compact Discs. Diese Laserstrahlung ist
sorgfältig abgeschirmt, so daß die Laserstrahlung innerhalb des
Gehäuses verbleibt.
Versuchen Sie daher niemals ein Zerlegen des CD-Spielers oder eine
Modifikation seiner Teile, da Sie sich sonst gefährlicher Laserstrahlung
und Spannung aussetzen können.
CQ-C1400N/1300AN/1300GN
VARO! AVATTAESSA
OLET ALTTIINA LASERSÄTEILYLLE.
ÄLÄ TUIJOTA
SÄTEESEEN.
V A R N I N G LASERSTRÅLNING NÄR DENNA
DEL ÄR ÖPPNAD.
STIRRA EJ IN I
STRÅLEN.
ADVARSEL LASERSTRÅLING NÅR DEKSEL
ÅPNES.
STIRR IKKE INN I
STRÅLEN.
Geräteansicht
(Oberseite)
3
E
N
G
L
I
S
H
1
Panasonic welcomes you to their constantly growing family of electronic products owners.
We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully
selected components, and assembled by people who are proud of the reputation their work has built for our company.
We know this product will bring you many hours of enjoyment, and after you discover the quality, value and reliability
we have built into it, you too will be proud to be a member of our family.
Accessories
q
w
e
r
E
N
G
L
I
S
H
t
XXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
OO-OOOOO
2
Precautions
When Driving
Disc Mechanism
Keep the volume level low enough to be aware of road and
traffic conditions.
Do not insert coins or any small objects. Keep screwdrivers
and other metallic objects away from the disc mechanism
and disc.
When Washing Your Car
Do not expose the product, including the speakers and
CDs, to water or excessive moisture. This could cause electrical shorts, fire, or other damage.
When Parked
Parking in direct sunlight can produce very high temperatures inside your car. Give the interior a chance to cool
down before switching the unit on.
Use the Proper Power Supply
This product is designed to operate with a 12 V DC, negative ground battery system.
Operating
Instructions
Installation
Instructions
Removable Face
Plate Case
Mounting Collar
Trim Plate
(YEFM284135)
(YEFM293250)
(YEFM293251)
(YEFA131646)
(YEFX0215873)
(YEFC05609)
Q'ty: 1
Q'ty: 1
Q'ty: 1
Q'ty: 1
Q'ty: 1 set
Service
This product is made of precision parts. Do not attempt to
disassemble or adjust any parts. For repair, please consult
your nearest authorized Panasonic Service Centre.
y
u
i
For installation
This product should be installed in a horizontal position
with the front end up at a convenient angle, but not more
than 30˚.
Note:
¡ The preset memory is cleared to return to the original
factory setting when the power connector or battery is
disconnected.
Power
Connector
ISO Antenna
Adapter
Lock Cancel
Plate
Mounting Bolt
Warranty Card,etc
(YEFM07405)
(YEAJ02874)
(YEP0FZ3264)
Q'ty: 1
Q'ty: 1
Q'ty: 1 set
Features
Large-sized volume control
MP3/WMA Playback from CD-R/RW
An large-sized rotary volume control that looks like one
belonging to a Hi-Fi audio system is featured.
You can play your MP3/WMA (Windows Media Audio) files
as well as regular CDs. With up to 10 to 12 times* the
capacity of a conventional CD, a single MP3/WMA-encoded
disc can keep you entertained throughout your entire journey.
CD Changer Control (only for CQ-C1400N)
You can connect the optional CD changer unit. For details,
refer to the operating instructions on the CD changer unit.
Note:
¡ The number in parenthesis underneath each accessory part name is the part number for maintenance and service.
¡ Mounting Collar r and Trim Plate t are mounted on the main unit at shipment.
*Depending on bit rate.
Remote Control Unit (Option)
(CA-RC61EX)
Note:
¡This operating instruction manual applies to the following models. The differences among these models are mentioned
below.
¡All illustrations represent model CQ-C1400N unless otherwise specified.
Model
CQ-C1400N
CQ-C1300AN
CQ-C1300GN
LCD Colour
White
Amber
Green
Key Colour
Red
Amber
Green
Face Colour
Plating silver
Plating black
Plating black
CD Changer Control
Supported
Not supported
Not supported
Maximum Power Output
50 W
45 W
45 W
Front / Rear
Rear
Rear
Features
Pre-out
(ATT)
(ATT)
Power
PWR
Mode (Source)
BAND/DISC UP
Car Audio
Band
Pause
Disc up
MUTE
Mute
VOL
Volume
MODE
PRG
BAND/DISC UP
TUNE
TRACK
Tune
Track selection
Fast forward/fast reverse
Car Audio
¡ The optional remote control is available from your local dealer. (CA-RC61EX)
10
CQ-C1400N/1300AN/1300GN
CQ-C1400N/1300AN/1300GN
11
E
N
G
L
I
S
H
General
Remote control sensor (a Page 11)
[VOLUME]
Volume
Clock Setting
The 24-hour system is used for the clock.
Note:
¡ Adjust the clock when “NO CT” appears on the screen.
3
Up
Down
Default: 18
Setting Range : 0 to 40
E
N
G
L
I
S
H
4
Select the radio AM mode. (a Page 14)
Note:
¡ The volume level can be set independently for each
source. (For radio, one volume setting for AM, one volume setting for all FMs)
Press and hold [DISP] (CT) for more than 2 seconds.
Mute
[]] [[] [DISP] (Display)
(Adjustment)
[SRC] (POWER)
[MUTE] (SQ)
Power
Source
Turn your car's ignition key to ACC or ON position.
Press [SRC] (Source) to change the source.
ON :
Press [SRC] (POWER).
MUTE indicator
(a Page 14)
SQ (Sound Quality)
SQ is a function that can call up various sound types at the
touch of button in accordance with your listening music type.
Press and hold [MUTE] (SQ) for more than 2 seconds to
select the sound type as follows:
CD Player
(a Page 23)
Press [DISP] (CT).
(default) : flat frequency responce
OR
no emphasizes
MP3/WMA Player
(When a MP3/WMA data disc
Scrolling
Adjust the hour.
[[] : put forward hour.
[]] : put back hour.
Radio
OFF: Press [SRC] (POWER) again and hold for more
than 1 second.
Demonstration Message
When the power is switched on for the first time, a
demonstration message appears on the display.
Press [DISP] to change to regular mode.
ON: Press [MUTE].
OFF: Press [MUTE] again.
(ROCK) : speedy and heavy sound
exaggerates bass and
treble
is in the player. a Page 24)
(POP)
CD Changer (only for CQ-C1400N)
(When an optional CD changer
is connected. a Page 28)
Adjust the minute.
[[] : put forward minute.
[]] : put back minute.
: wide-ranged and deep sound
slightly emphasizes
bass and treble
Press [DISP] (CT).
(VOCAL) : clear sound
emphasizes middle tone
and slightly emphasizes
treble
Note:
¡ If no operation takes place for more than 5 seconds in
the SQ mode, the display returns to the regular mode.
¡ Settings of SQ, bass/treble are influenced one another.
If the influence mentioned above causes distortion to
audio signal, readjust bass/treble or volume (a Page
30).
12
CQ-C1400N/1300AN/1300GN
Note:
¡ When a broadcast of FM Radio Data System is received,
the clock is put right automatically by the Clock Time
service. (a Page 16)
CQ-C1400N/1300AN/1300GN
13
E
N
G
L
I
S
H
Radio
[BAND] (APM: Auto Preset Memory)
[PTY] (MONO/LOC)
E
N
G
L
I
S
H
Station Preset
Up to 6 stations can be stored in each of the FM1, FM2, FM3 and AM (LW/MW) band selections.
5
6
Caution:
¡ To ensure safety, never attempt to preset stations while you are driving.
Preset buttons [1] to [6]
(Preset Station)
[SRC] (Source)
q Radio Mode
Press [SRC] (Source) to select the radio mode.
[]] [[]
(Tune)
r Mono/Local Selection
Radio Mode Display
w
Frequency
FM broadcasts
Band
Press and hold [PTY] (MONO/LOC) to change
the mode. Release when at the desired point.
Press [BAND].
Manual Preset Memory
Automatically save stations with good reception in the preset memory.
q Select a band. (a Previous page)
w Press and hold [BAND] (APM: Auto Preset Memory)
for more than 2 seconds.
The 6 stations with good reception will be automatically
saved in the memory under preset number 1 to 6.
Once set, the preset stations are sequentially scanned
for 5 seconds each. (scanning)
Manually save a station in preset memory.
q Select a band and frequency. (a Previous page)
w Press and hold one of the preset buttons from [1] to [6]
until the display blinks once.
Preset number
MONO : Monaural reception. Select MONO to
reduce noise when receiving a weak
stereo broadcast.
LOCAL :Only stations with good reception are
detected in seek tuning.
Band
Auto Preset Memory (APM)
Note:
¡ To stop the scanning, press one of the buttons from [1]
to [6].
¡ Only RDS stations will be saved at default setting (AF
ON). To select non RDS stations too, set AF
OFF. (a Page 17)
AM broadcast
FM1
(Default)
FM2
FM3
AM (LW/MW)
Press [PTY] (MONO/LOC) to switch LOCAL
mode on and off.
FM broadcast
AM broadcast
MONO OFF
LOCAL OFF
(Default)
LOCAL OFF
MONO ON
LOCAL OFF
LOCAL ON
(Default)
[[] : Higher frequency
[]] : Lower frequency
Press and hold [[] or []] for more than 0.5
seconds, then release. Seeking will start.
Preset Station Calling
q Select a band. (a Previous page)
w Press one of the preset button from [1] to [6].
MONO ON
LOCAL ON
e Tuning
Note:
¡ New stations overwrite existing saved stations after following this procedure.
MONO OFF
LOCAL ON
MONO/LOCAL indicator
Example: MONO ON/LOCAL ON
lights
14
CQ-C1400N/1300AN/1300GN
CQ-C1400N/1300AN/1300GN
15
E
N
G
L
I
S
H
7
Radio Data System (RDS)
RDS Basics
E
N
G
L
I
S
H
Alternative Frequency (AF)
Some FM stations are broadcasting added data compatible with RDS. This radio set offers convenient functions using such
data.
RDS service availability varies with areas. Please understand if RDS service is not available in your area, the following service is not available, either. This chapter explains the summary and operation regarding RDS.
The following functions are available when receiving RDS stations.
Program Service Name (PS)
Display
The name of station is displayed.
8
Program Type (PTY) Display
RDS FM stations provide a program type identification signal.
Example: news, rock, classical music, etc. (a Page 19)
[DISP]
(Display)
AF indicator
Alternative Frequency (AF)
When reception is poor, an RDS station broadcasting the
same program is tuned in automatically.
Program Identification (PI)
Each program has its own number. This may be used to
search for another frequency on which the same program
is broadcast.
Traffic Program (TP)
Some RDS FM stations periodically provide traffic
announcement.
The station which broadcast the traffic announcement is
called Traffic Program (TP).
Region (REG)
Each region has its own number. This may be used to
identify the region where the station you are now listening
to is located.
Traffic Announcement (TA)
Radio announcements on traffic conditions.
Alternative Frequency (AF)
Mode
Press [AF] to select one of the following AF modes.
AF ON : AF, Best Station Research and PI seek function are
active.
When receiving an RDS station, the CT service automatically adjusts the time.
“NO CT” is displayed in areas where CT service is not available. (a Page 13 for Clock Setting)
Display Change
Press [DISP] (Display) to change the display as follows.
PS (Program Service Name) (Default)
Frequency
: Low level AF operating sensitivity. (Default)
: High level AF operating sensitivity.
: When the AF network of an RDS
station is not required.
Region (REG) Mode
Clock Time (CT) Service
[AF] (REG)
(AF Level/REG Mode)
Changes the selection range of AF, Best Station Research
and PI seek.
Press and hold [AF] (REG) for more than 2 seconds to
switch on and off.
: The frequency is changed only
for programs within the region.
Clock Time
Preset Memory (AF ON Setting)
Preset Station Calling (Best Station Research)
AF self-tuning allows you to select a station with good
reception from the same network when the preset tuning is
activated.
For Poor Reception (PI Seek)
If reception becomes poor when tuning in a preset station,
press the same preset number button. The same station
with better reception will be searched for.
Press the same preset number button again to cancel.
: The frequency is changed also
for programs outside the region.
(Default)
Note:
¡ When REG mode is switched from OFF to ON or vice
versa, AF mode turns on automatically.
16
CQ-C1400N/1300AN/1300GN
Note:
¡ For PI Seek, cancel the TA mode first, then execute PI
Seek.
CQ-C1400N/1300AN/1300GN
17
E
N
G
L
I
S
H
9
Radio Data System (RDS) (continued)
Traffic Announcement (TA)
Some RDS FM stations periodically provide traffic information.
RDS FM stations provide a program type identification signal. (Example: news, rock, classical music, etc.)
[VOLUME]
[]] [[](TP Seek Tuning)
(Default: OFF)
While the unit is receiving a non-TP station or TP station
with poor reception, the unit will seek a TP station with
good reception by pressing [TA] (TA mode) during reception of an FM station. When the TP station received begins
a traffic announcement, you can hear it from the unit even
in the other modes (TA standby or CD or MP3/WMA).
TP Indicator
lights up during reception of
TP station.
[BAND] (Preset PTY Search,
PTY Selection)
[TA] (TP (TA) Search)
TA on indicator
TP (TA) Search
Program Type (PTY) Reception
PTY indicator
[]] [[] (PTY Selection)
Other TA functions
Program Type (PTY) Mode
PTY Preset
TA Volume Set: Traffic announcements are broadcast at
the TA volume level. (a Page 30)
TP Seek Tuning: When TA ON is selected, only TP station will be searched.
Press and hold []] or [[] for more than 0.5 seconds,
then release. Seeking will start.
TP Auto Preset Memory: When TA ON is selected,
only TP station will be memorized automatically. (a Page
15 for auto preset memory)
TP Auto Search: When reception of a TP station
becomes poor, TP Auto Search will automatically search
for a TP station with better reception.
Press [PTY] to switch the PTY display mode on and off.
The PTY function described below becomes enabled after
selecting to the PTY mode.
PTY Preset Call
TA Standby Mode
Being set to TA on in another mode, the unit will be automatically switched to the radio mode and make a traffic
announcement when it begins. The traffic announcement
having finished, the unit will return to the previous mode.
To listen to only traffic
announcements
While listening to an FM station which is not currently
broadcasting traffic announcement, turn the [VOLUME]
to the counterclockwise to set the volume to 0. The traffic
announcement will be output at the TA volume level.
10
[PTY] (PTY Mode)
Preset Buttons [1] to [6] (PTY Preset)
PTY Selection
E
N
G
L
I
S
H
Program types are stored in memory under preset buttons
from [1] to [6] as shown in the tables on the next page.
To tune in the desired program type, press any of preset
buttons from [1] to [6].
q Press [[] to change the program type as shown below.
([]] : opposite direction)
SPEECH
INFO
CULTURE
ROCK_M
OTHER_M
SOCIAL
LEISURE
OLDIES
/
/
/
/
/
/
/
/
MUSIC /
SPORT /
SCIENCE /
EASY_M /
WEATHER/
RELIGION /
JAZZ
/
FOLK_M /
NEWS
/
EDUCATE /
VARIED /
LIGHT_M /
FINANCE /
PHONE_IN /
COUNTRY /
DOCUMENT
AFFAIRS /
DRAMA /
POP_M /
CLASSICS /
CHILDREN /
TRAVEL /
NATION_M /
w Select the desired program type and press [BAND].
Search will start to tune in to a station broadcasting the
selected program type.
Press [BAND] again to cancel.
Note:
¡ When there is no corresponding program type station,
“NONE” is displayed for 2 seconds.
PTY display in Swedish
Press and hold [SEL] for more than 2 seconds to open the
PTY display language.
Turn [VOLUME] to switch the language as follows.
Preset PTY Search
q Select a program type by pressing the preset button.
The preset program type appears on the display for 5
seconds.
Example: Press preset button [1].
w Press the same preset button again (or press [BAND])
to tune in the desired program type station.
Example: Press preset button [1] again.
Press [BAND] again to cancel.
Note:
¡ When there is no corresponding program type station,
“NONE” is displayed for 2 seconds.
PTY Preset Change
q Select a program type by using PTY Selection or pressing PTY Preset buttons.
w Press and hold one of the buttons from [1] to [6] for
more than 2 seconds.
Example: Press and hold preset button [2] for more
than 2 seconds.
(English)
(Swedish)
18
CQ-C1400N/1300AN/1300GN
CQ-C1400N/1300AN/1300GN
19
E
N
G
L
I
S
H
Radio Data System (RDS) (continued)
Other RDS functions
11
PTY Preset (Default)
Preset No.
Program Type
1
NEWS
2
SPEECH
12
Enhanced Other Network (EON)
When PTY search is activated, these program type is receivable.
NEWS
AFFAIRS, INFO, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED,
WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN,
TRAVEL, LEISURE, DOCUMENT
3
SPORT
SPORT
4
POP_M
POP_M
5
CLASSICS
6
MUSIC
CLASSICS
ROCK_M, EASY_M, LIGHT_M, OTHER_M, JAZZ, COUNTRY, NATION_M,
OLDIES, FOLK_M
FM1
EON indicator
When EON data is received, the EON indicator lights and the TA and AF functions are expanded as follows.
TA: Traffic information from the current and other network stations can be received.
AF: The frequency list of preset RDS stations is updated by EON data.
EON enables the radio to make fuller use of RDS information. It constantly updates the AF list of preset stations, including
the one that is currently tuned in to. For example, if you preset a station far from home, you will later be able to receive the
same station at an alternative frequency, or any other station serving the same program. EON also keeps track of locally
available TP stations for quick reception.
Emergency Announcement Reception
Use to note changes in preset stations.
Preset No.
E
N
G
L
I
S
H
FM2
FM3
1
When an emergency announcement is broadcast, the unit is automatically switched to receiving that broadcast. (Even when
in CD mode, MP3/WMA mode, CD changer mode (only for CQ-C1400N).) During receiving the emergency announcement,
“ALARM” appears on the display.
2
3
4
5
6
Note:
¡ Emergency announcements are broadcast at the TA volume level. (a Page 30)
Other PTY functions
PTY Language Selection: The language displayed on the screen is selectable. (English or Swedish) (a Page 19)
20
CQ-C1400N/1300AN/1300GN
CQ-C1400N/1300AN/1300GN
21
E
N
G
L
I
S
H
13
CD and MP3/WMA
CD Player
E
N
G
L
I
S
H
¡Do not watch the scroll display while driving.
Caution:
¡ This unit does not support 8 cm discs.
¡ Do not use irregularly shaped discs.(a Page 33)
¡ Do not use discs that have a seal or label attached.
¡ Do not insert foreign matter into the disc slot.
Note:
¡ Refer to the section on “Notes on MP3/WMA” (a
Page 26) and “Notes on CD-Rs/RWs” (a Page 33).
¡ A disc which has both CD-DA data and MP3/WMA
data on it may not be reproduced normally (For example, it may be reproduced without sound).
Available Discs
[BAND] (y / 5: Pause)
Disc Insert
indicator
Insert a disc.
[s] / [d] (a / f)
(Track/fast forward/
fast reverse)
Eject [u]
14
[DISP] (Display)
Label side
[SRC] (Source)
Note:
¡ Do not insert a disc when
indicator
lights because a disc is already loaded.
[3] (SCROLL)
[4] (RANDOM)
[6] (REPEAT)
[5] (SCAN)
When CD is in the player
Pause (y / 5)
Press [SRC] (Source) to select the CD player mode and
playback starts.
Press [BAND] (y / 5).
Press [BAND] (y / 5) again to cancel.
CD-DA
MP3/WMA
MP3
MP3
Track
Disc Indicator
CD-RW TEXT
Playback will start automatically after recognize the data of
the loading disc.
All the available tracks are played in a random sequence.
Press [DISP] (Display).
Press [4] (RANDOM).
lights.
Press [4] (RANDOM) again to cancel.
Disc title
(
WMA
Random Play
Display Change
MP3
CD-RW CD-ROM
WMA
Play time
)(Data reading)
Scan Play
The first 10 seconds of each track is played in sequence.
WMA
CD-RW CD-ROM
Press [5] (SCAN).
Track title
or
¡It may take some
time to start playing.
(a Page 24 about MP3/WMA player)
Disc Eject
Press [u] to stop CD/MP3/WMA play and eject the disc.
(
)(Data reading)
Clock time
Note:
¡ “NO TITLE” is displayed when there is no information
on the disc.
¡ Press [3] (SCROLL) to have an another circle scroll
while a title is displayed.
Track Selection
Press [5] (SCAN) again to cancel.
Repeat Play
The current track is repeated.
Press [6] (REPEAT).
lights.
Press [6] (REPEAT) again to cancel.
[d]: Next track
[s]: Beginning of the current track
For the previous track, press twice.
Fast Forward/Fast Reverse
Press and hold
[d] (2): Fast Forward
[s] (1): Fast Reverse
Release to resume the playback.
22
CQ-C1400N/1300AN/1300GN
CQ-C1400N/1300AN/1300GN
23
E
N
G
L
I
S
H
MP3/WMA Player
E
N
G
L
I
S
H
¡Do not watch the scroll display while driving.
[BAND] (y / 5 : Pause)
indicator
15
16
[DISP] (Display)
[6] (REPEAT)
[3] (SCROLL)
[5] (SCAN)
[SRC] (Source)
[4] (RANDOM)
[{] / [}] (FOLDER) (Folder selection)
[s] / [d]
(File/fast forward/fast reverse)
When CD is in the player
ID3/WMA Tag Setting
Random Play
Repeat Play
Press [SRC] (Source) to select the MP3/WMA player
mode and playback starts.
Press and hold [3] (SCROLL) for more than 2 seconds.
All the available files are played in a random sequence.
The current file is repeated.
Press [4] (RANDOM).
lights.
Press [4] (RANDOM) again to cancel.
Press [6] (REPEAT).
lights.
Press [6] (REPEAT) again to cancel.
Folder Random Play
Folder Repeat Play
All the files on the current folder are played in a random
sequence.
The current folder is repeated.
Folder
(Default)
File
Display Change
When a folder name is displayed:
TAG ON: The album title is displayed.
TAG OFF: The folder name is displayed.
When a file name is displayed:
TAG ON: The title/artist name is displayed.
TAG OFF: The file name is displayed.
Press [DISP] (Display).
Play time
Folder Selection
[}] : Next folder
[{] : Previous folder
Folder name/album
(
)(Data reading)
File name/title and artist
(
)(Data reading)
Clock Time
Note:
¡ “NO NAME” is displayed when there is no information
on the disc.
¡ Press [3] (SCROLL) to have an another circle scroll
while a title is displayed.
24
File Selection
[d] : Next file
[s] : Beginning of the current file.
For the previous file, press twice.
Press and hold [4] (RANDOM) for more than 2 seconds.
blinks.
Press and hold [4] (RANDOM) again for more than 2
seconds to cancel.
Press and hold [6] (REPEAT) for more than 2 seconds.
blinks.
Press and hold [6] (REPEAT) again for more than 2 seconds to cancel.
Scan Play
The first 10 seconds of each file is played in sequence.
Press [5] (SCAN).
Fast Forward/Fast Reverse
Press [5] (SCAN) again to cancel.
Press and hold
[d] (2) : Fast Forward
[s] (1) : Fast Reverse
Release to resume normal playback.
Folder Scan Play
Pause (y / 5)
Press and hold [5] (SCAN) for more than 2 seconds.
From the next folder, the first 10 seconds of the first file on
each folder is played in sequence.
Press [BAND] (y / 5).
Press [BAND] (y / 5) again to cancel.
CQ-C1400N/1300AN/1300GN
Press and hold [5] (SCAN) again for more than 2 seconds to cancel.
CQ-C1400N/1300AN/1300GN
25
E
N
G
L
I
S
H
17
MP3/WMA Player (continued)
E
N
G
L
I
S
H
Notes on MP3/WMA
MP3 (MPEG Audio Layer-3) and WMA (Windows MediaTM Audio) are the compression formats of digital audio. The former
is developed by MPEG (Motion Picture Experts Group), and the latter is developed by Microsoft Corporation. Using these
compression formats, you can record the contents of about 10 music CDs on a single CD media (This figures refer to data
recorded on a 650 MB CD-R or CD-RW at a fixed bit rate of 128 kbps and a sampling frequency of 44.1 kHz).
Note:
¡MP3/WMA encoding and writing software is not supplied with this unit.
¡CD writing software is not supplied with this unit.
Points to remember when making MP3/WMA files
Common
MP3
¡High bit rate and high sampling frequency are recommended for high quality sounds.
¡Selecting VBR (Variable Bit Rate) is not recommended
because playing time is not displayed properly and sound
may be skipped.
¡The playback sound quality differs depending on the
encoding circumstances. For details, refer to the user
manual of your own encoding software and writing software.
¡It is recommended to set the bit rate to “128 kbps or
more” and “fixed”.
WMA
¡It is recommended to set the bit rate to “64 kbps or
more” and “fixed”.
¡Do not set the copy protect attribute on the WMA file to
enable this unit to play back.
¡WMA Version 9 is supported. However, the new functions in Version 9 (WMA pro, Loss-less, and the combination of 64 kbps and 48 kHz) are excluded.
Caution: Never assign the “.mp3”, or “.wma” file name extension to a file that is not in the MP3/WMA format.
This may not only produce noise from the speaker damage, but also damage your hearing.
Display Information
MP3/WMA
¡Folder name
¡File name
MP3 (ID3 tag)
¡Album
¡Title and Artist
WMA (WMA tag)
¡Album
¡Title and Artist
Displayable characters
¡Displayable length of file name/folder name: within 96 characters
¡Name files and folders in accordance with the standard of each file system. Refer to the instructions of writing software
for details.
¡ASCII character set and special characters in each language can be displayed.
ASCII character set
A to Z, a to z, digits 0 to 9, and the following symbols:
(space) ! ” # $ % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | }
~
¡You are recommended to minimize the chances of making a disc that contains both CD-DA files and MP3/WMA
files.
¡If CD-DA files are on the same disc as MP3 or WMA
files,the songs may not play in the intended order, or
some songs may not play at all.
¡When storing MP3 data and WMA data on the same
disc, use different folders for each data.
¡Do not record files other than MP3/WMA files and unnecessary folder on a disc.
¡The name of MP3/WMA file should be added by rules as
shown in the following descriptions and also comply with
the rules of each file system.
¡You may encounter trouble in playing MP3/WMA files or
Supported file systems
ISO 9660 Level 1/Level 2, Apple Extension to ISO 9660,
Joliet, Romeo
Note: Apple HFS, UDF 1.50, Mix CD,CD Extra is not supported.
Compression formats (Recommendation: “Points to remember when making MP3/WMA files” on the previous page )
Compression method
Bit rate
VBR
Sampling frequency
MPEG 1 audio layer 3 (MP3)
32 k-320 kbps
Yes
32, 44.1, 48 kHz
MPEG 2 audio layer 3 (MP3)
8 k-160 kbps
Yes
16, 22.05, 24 kHz
Windows Media Audio Ver. 2, 8, 9
64 k-192 kbps
No
32, 44.1, 48 kHz
Folder selection order/file playback order
Special characters
À Á Â Ã Å à á â ã å
¡Maximum number of files/folders: 999 (files + folders)
¡Maximum number of files in one folder: 255
¡Maximum depth of trees: 8
¡Maximum number of folders: 255 (Root folder is included.)
2
q
Folder Selection
4
e
In the order
1
–
8
3
w
File Selection
In the order
–
y
q
5
6
r
8
7
Tree 1
Tree 2
Tree 3
t
y
Tree 4
Tree 8
(Max.)
Ä ä
Ù Ú Û Ü ù ú û ü
Note:
¡With some software in which MP3/WMA format files have been encoded, the character information may not be displayed
properly.
¡Undisplayable characters and symbols will be converted into an asterisk( ).
CQ-C1400N/1300AN/1300GN
Root Folder
(Root Directory)
1
Note:
¡This unit counts the number of folders irrespective of the presence
or absence of MP3/WMA file.
¡If the selected folder does not contain any MP3/WMA files, the
nearest MP3/WMA files in the order of playback will be played.
¡Playback order may be different from other MP3/WMA players even
if the same disc is used.
¡“ROOT” appears when displaying the root folder name.
Ò Ó Ô Õ Ö ò ó ô õ ö
26
displaying the information of MP3/WMA files recorded
with certain writing software or CD recorders.
¡The file extension “.mp3” or “.wma” should be assigned
to each file depending on the file format.
¡This unit does not have the play list function.
¡Although Multi-session recording is supported, the use of
Disc-at-Once is recommended.
Maximum number of files/folders
Displayed items
CD-TEXT
¡Disc title
¡Track title
18
Recording MP3/WMA files on a CD-media
What is MP3/WMA?
Windows Media, and the
Windows logo are trademarks, or
registered trademarks of
Microsoft Corporation in the
United States and/or other countries.
Copyright
It is prohibited by copyright laws to copy, distribute and deliver
copyrighted materials such as music without the approval of
copyright holder except enjoying yourself personally.
No warranty
Above description complies with our investigations as of
December 2003. It has no warranty for reproducibility and displayability of MP3/WMA.
CQ-C1400N/1300AN/1300GN
27
E
N
G
L
I
S
H
CD Changer Control (only for CQ-C1400N)
. ¡CD changer functions are designed for optional Panasonic CD changer unit.
¡Do not watch the scroll display while driving.
[{] / [}] (DISC) (Disc Selection)
19
[DISP] (Display)
[3] (SCROLL)
[6] (REPEAT)
[4] (RANDOM)
[5] (SCAN)
[SRC] (Source)
Disc Selection
Preparation:
¡Connect the CD changer, and load a magazine (CDs).
[}]: Next disc
[{]: Previous disc
Press [SRC] (Source) to select the CD changer mode and
playback starts.
Track Selection
[d]: Next track
[s]: Beginning of the current track.
CD changer
For the previous track, press twice.
indicator
Disc number
Play time
Note:
¡ Load a magazine with CDs when “NO DISC” is displayed.
Display Change
Note:
¡ CD text is displayed when the unit is connected to a CD
changer capable of recognizing CD text (CXDP9061EN).
¡ Trouble may occur while playing CD-Rs.
Refer to the section on “Notes on CD, CD
Media (CD-R, CD-RW, CD-ROM)” (a Page 33)
¡ This unit does not support the following through the
CD changer.
¡CD-RW playback. (except when CX-DP880N
is connected)
¡MP3/WMA playback.
¡ Pausing does not function in the CD changer mode.
20
[s] / [d]
(Track/fast forward/fast reverse)
CD Changer Mode
Track number
E
N
G
L
I
S
H
Fast Forward/Fast Reverse
Press and hold
[d] (2): Fast Forward
[s] (1): Fast Reverse
Release to resume the playback.
Random Play
Repeat Play
All the available tracks are played in a random sequence.
The current track is repeated.
Press [4] (RANDOM).
lights.
Press [4] (RANDOM) again to cancel.
Press [6] (REPEAT).
lights.
Press [6] (REPEAT) again to cancel.
Disc Random Play
Disc Repeat Play
All the available tracks on the current disc are played in a
random sequence.
The current disc is repeated.
Press and hold [4] (RANDOM) for more than 2 seconds.
blinks.
Press and hold [4] (RANDOM) again for more than 2
seconds to cancel.
Press and hold [6] (REPEAT) for more than 2 seconds.
blinks.
Press and hold [6] (REPEAT) again for more than 2 seconds to cancel.
Scan Play
Press [DISP] (Display).
The first 10 seconds of each track is played in sequence.
Press [5] (SCAN).
Disc Title
(
)(Data reading)
Press [5] (SCAN) again to cancel.
Track Title
(
)(Data reading)
Disc Scan Play
From the next disc, the first 10 seconds of the first track of
all the discs is played in sequence.
Clock Time
Press and hold [5] (SCAN) for more than 2 seconds.
Note:
¡ “NO TITLE” is displayed when there is no information
on the disc.
¡ Press [3] (SCROLL) to have an another circle scroll
while a title is displayed.
28
CQ-C1400N/1300AN/1300GN
Press and hold [5] (SCAN) again for more than 2 seconds to cancel.
CQ-C1400N/1300AN/1300GN
29
E
N
G
L
I
S
H
Audio Setting
E
N
G
L
I
S
H
Turn [VOLUME].
21
22
Press [VOLUME]
(SEL: Select).
[DISP]
(Return to regular mode)
Volume
Default : 18
Setting range : 0 to 40
Press [VOLUME] (SEL: Select)
to open the menu.
Turn [VOLUME].
q : Up
w : Down
Press [VOLUME] (SEL: Select).
Turn [VOLUME].
q : Increased
w : Decreased
Press [VOLUME] (SEL: Select).
Turn [VOLUME].
q : Increased
w : Decreased
Press [VOLUME] (SEL: Select).
Turn [VOLUME].
q : Right enhanced
w : Left enhanced
Press [VOLUME] (SEL: Select).
Turn [VOLUME].
q : Front enhanced
w : Rear enhanced
Bass/Treble
You can adjust the bass and treble sound.
Default: BAS (bass) 0 dB
TRE (treble) 0 dB
Setting range: –12 dB to +12 dB (by 2 dB)
Balance/Fader
You can adjust the sound level among the right, left, front
and rear speakers.
Default: BAL (balance) CNT (centre)
FAD (fader) CNT (centre)
Setting range: 15 levels each
Turn [VOLUME].
TA Volume Set
Traffic announcement are broadcast at the TA volume level.
Default : 18
Setting range : 1 to 40
30
CQ-C1400N/1300AN/1300GN
Note:
¡ Press [DISP] to return to the regular mode.
¡ If no operation takes place for more than 7 seconds in audio mode (2 seconds in the volume mode) setting, the display returns to regular mode.
Press [VOLUME] (SEL: Select).
: TA volume 1
: TA volume 40
CQ-C1400N/1300AN/1300GN
31
E
N
G
L
I
S
H
23
Anti-Theft System
Fuse
This unit is equipped with a removable face plate. Removing
this face plate makes the radio totally inoperable.
Use fuses of the same specified rating (15 A). Using different substitutes or fuses with higher ratings, or connecting the
unit directly without a fuse, could cause fire or damage to the unit.
If the replacement fuse fails, contact your nearest authorized Panasonic Service Centre.
q
24
Remove the Removable Face
Plate
q Switch off the power of the unit.
w Press the release button [
Maintenance
w
Your product is designed and manufactured to ensure the minimum of maintenance. Use a dry, soft cloth for routine exterior cleaning. Never use benzine, thinner, or other solvents.
].
e Pull on the right side of the unit.
r Gently press the bottom of the case and open the cover.
Place the face plate into the case and take it with you
when you leave the car.
Notes on Discs
Removable Face Plate Case
Notes on CD/CD Media (CD-R, CD-RW, CD-ROM)
If you use commercial CDs, they must have
either of these labels shown at right.
Install Removable Face Plate
q Slide the left side of the removable face plate in place.
w Press the right end of removable face plate until “click” is
heard.
E
N
G
L
I
S
H
w
q
TEXT
How to hold the disc
¡ Do not touch the underside of the disc.
¡ Do not scratch on the disc.
¡ Do not bend the disc.
¡ When not in use, keep disc in the case.
Label side
Do not use irregularly shaped discs.
Do not leave discs in the following places:
Panel Removal Alarm
This alarm sounds to warn you not to forget to remove the
panel before leaving your car.
¡ Direct sunlight
¡ Near car heaters
¡ Dirty, dusty and damp areas
¡ Seats and dashboards
Disc cleaning
Do not use irregularly shaped discs.
Use a dry, soft cloth to wipe from the center outward.
“PANEL !” is displayed and an alarm sounds when turning
off the power of this unit or turning the ignition switch of
your car to OFF.
Caution:
¡ This face plate is not waterproof. Do not expose it to water or excessive moisture.
¡ Do not remove the face plate while driving your car.
¡ Do not place the face plate on the dashboard or nearby areas where the temperature rises to high level.
¡ Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical contacts.
¡ If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.
¡ To avoid damaging the front panel, do not push it down or place objects on it while it is open.
32
CQ-C1400N/1300AN/1300GN
Do not attach any seals or labels to your discs.
<Correct>
<Wrong>
Do not write anything on the disc label with a pointed pen or
hard-point pen.
Notes on CD-Rs/RWs
¡ You may have trouble playing back some CD-R/RW discs recorded on CD recorders (CD-R/RW drives), either due to
their recording characteristics or dirt, fingerprints, scratches, etc. on the disc surface.
¡ CD-R/RW discs are less resistant to high temperatures and high humidity than ordinary music CDs. Leaving them
inside a car for extended periods may damage and make playback impossible.
¡ Some CD-R/RWs can not be played back successfully thanks to incompatibility among writing software, a CD recorder
(CD-R/RW drive) and the discs.
¡ This player cannot play the CD-R/RW discs if the session is not closed.
¡ This player cannot play the CD-R/RW discs which contains other than CD-DA or MP3/WMA data.
¡ Be sure to observe the instructions of CD-R/RW disc for handling it.
CQ-C1400N/1300AN/1300GN
33
E
N
G
L
I
S
H
Troubleshooting
If You Suspect Something Wrong
Check and take steps as described below.
25
If the described suggestions do not solve the problem, it is recommended to take the unit to your nearest authorized Panasonic
Service Centre. The product should be serviced only by qualified
personnel.
Caution:
¡Do not use the unit in an irregular condition,
for example, without sound, or with smoke or
foul smell, which can cause ignition or electric
shock. Immediately stop using the unit and
call the store where you purchased it.
¡Never try to repair the unit by yourself
because it is dangerous to do so.
■ Common
Problem
Possible cause a Possible solution
The power cord (battery, ACC and ground) is connected in the wrong way.
aCheck the wiring.
No power to the unit
Fuse blowout
aEliminate the cause of fuse blowout and replace the fuse with new one.
Consult your dealer.
MUTE is set to ON.
aSet MUTE to OFF.
There is contact between the external mute lead and the chassis.
aConnect the external mute lead correctly. If the lead is unused, insulate
it.
Sound is not
generated
The wiring of the speaker line are not correct, or a break or poor contact arises.
aCheck the wiring in accordance with the wiring diagram. (Installation
Instructions)
The demonstration
screen displayed and
no operable
There is an electromagnetic-wave generator such as a cellular phone near the
unit or its electrical lines.
aKeep an electromagnetic-wave generator such as a cellular phone away
from the unit and the wiring of the unit. In case that noise cannot be
eliminated due to the wiring harness of the car, consult your dealer.
Noise
The contact of the ground lead is poor.
aMake sure that the ground lead is connected to an unpainted part of the
chassis securely.
34
■ Common (continued)
Problem
No sound from speaker(s)
Noise is made in step
with engine revolutions.
Alternator noise comes from the car.
aChange the wiring position of the ground lead.
aMount a noise filter on the power supply.
Some operations are
not executable.
Some operations are not executable in particular modes such as menu mode.
aRead the operating instructions carefully and cancel the mode. In case
the unit is still out of order, consult the dealer.
CQ-C1400N/1300AN/1300GN
Possible cause a Possible solution
26
BAL/FAD setting is not appropriate.
aReadjust BAL/FAD.
There is a break, a short circuit, poor contact or wrong wiring regarding the
speaker wiring.
aCheck the speaker wiring.
The speaker channels
are reversed between
right and left.
The speaker wiring is confused between right and left.
aPerform the speaker wiring in accordance with the wiring diagram.
The sound field is not
clear in the stereo
mode. Central sound is
not settled.
The plus and minus terminals at right and left channels of speakers are connected reversely.
aPerform the speaker wiring in accordance with the wiring diagram.
■ Radio
Problem
Poor reception or
noise
You cannot operate the unit while the demonstration screen appears.
aPress [DISP] to end the demonstration screen.
If the demonstration screen appears frequently, there is a possibility that poor
contact or wrong wiring arises between the battery lead of the unit and the
battery cable of the car. (The battery lead should be always powered.)
aCheck the battery wiring in accordance with the wiring diagram.
E
N
G
L
I
S
H
Possible cause a Possible solution
Antenna installation or wiring of antenna cable is faulty.
aCheck whether the antenna mounting position and its wiring are correct.
In addition, check to see whether the antenna ground is securely connected to the chassis.
No power is supplied to the antenna amplifier (when using a film antenna,
etc.).
aCheck the wiring of the antenna battery lead.
Stereo broadcast is
received only in mono.
The MONO mode is active.
aCancel the MONO mode.
Only nearby stations
can be received.
The LOCAL mode is active.
aCancel the LOCAL mode.
The number of auto
preset stations is less
than 6.
Preset stations cannot
be stored.
The number of receivable stations is less than 6.
aMove to an area where receivable stations number is maximum, and try
presetting.
The LOCAL mode is active.
aCancel the LOCAL mode.
The contact of the battery lead is poor, or the battery lead is not always powered.
aMake sure that the battery lead is connected securely, and preset stations again.
CQ-C1400N/1300AN/1300GN
35
E
N
G
L
I
S
H
Troubleshooting
■ RDS
■ MP3/WMA
Problem
Possible cause a Possible solution
PS does not appear
even if an RDS station
is tuned into. (“NONE”
appears.)
A PS code cannot be received for the reason of bad receiving conditions, etc.
aA PS code appears if it is received. Wait for a while until conditions
change.
Receiving programs
differs from PTY that
was already set up.
When the station changed between programs, the unit could not receive the
PTY code.
aAn appropriate program is searched for and tuned into after receiving a
corresponding PTY code. Therefore, wait for a while.
“NO PTY” appears
when selecting PTY.
Any specified PTY programs cannot be received. There is no desired program
being broadcast in your area.
aSelect another PTY, or wait until a desired program starts.
27
E
N
G
L
I
S
H
(continued)
The clock (CT) does
not indicate accurate
time.
The unit received a station that broadcasting time that is not appropriate for
you, or the unit is receiving a station that does not broadcast time.
aReceive a station that broadcasting time that is appropriate for your
area, or adjust CT manually.
An AF station cannot
be received even if
EON is set to ON.
There is little difference in receiving conditions between the current station
and AF stations. Update of AF list ended in failure.
aWait until AF list is successfully updated. For unstable reception, tune
into a stable station by hand.
Problem
No playback or disc
ejected
Possible cause a Possible solution
28
The disc has unplayable formatted data.
aRefer to the description about MP3/WMA for playable sound data except
CD-DA (i.e. music CD).
The unit plays back the first track of a MIX mode CD.
aSkip the first track.
The CD-R/RWs that are
playable on other
devices are not
playable on this unit.
The playability of some CD-R/RWs may depend on the combination of media,
recording software and recorder to be used even if these CD-R/RWs are
playable on other devices such as a PC.
aMake CD-R/RWs in different combination of media, recording software
and recorder after referring to the description about MP3/WMA.
Sound skipping or
noise
There is a flaw or foreign material on the disc.
aRemove the foreign material, or use a flawless disc. For MP3/WMA,
refer to the description about MP3/WMA.
Note:
¡Refer to “Notes on MP3/WMA”. (a Page 26)
■ CD
Problem
Possible cause a Possible solution
No playback or disc
ejected
Sound skipping or
noise
Sound skipping due to
vibration
The disc is inserted upside down.
aInsert a disc correctly.
There is a flaw or foreign material on the disc.
aRemove the foreign material, or use a flawless disc.
There is a flaw or foreign material on the disc.
aRemove the foreign material, or use a flawless disc.
The unit is not sufficiently secured.
aSecure the unit to the console box with the rear support strap, etc.
The unit is tilted at over 30˚ in the front-to-end direction.
aMake the angle 30˚ or less.
A label is peeled off from the CD in the unit.
aRefer repair to the dealer where you purchased the unit.
Disc unejectable
36
The microcontroller in the unit operates abnormally due to noise or other factors.
aPress the reset switch. If there is no reset switch, unplug the power cord
and plug it again. In case the unit is still out of order, consult the dealer.
CQ-C1400N/1300AN/1300GN
CQ-C1400N/1300AN/1300GN
37
E
N
G
L
I
S
H
■ CD Changer (continued)
Troubleshooting (continued)
Display
Possible cause a Possible solution
Error Display Messages
Disconnected
a Verify the wiring.
■ CD/MP3/WMA
Reading
a Wait for a while.
29
Display
Possible cause a Possible solution
Note: Messages in the action and display sections of the error chart vary with changers. Refer to the operating instructions for the CD changer for details.
E
N
G
L
I
S
H
30
Disc is dirty, or is upside down.
Disc has scratches.
No operation by some cause.
After 5 seconds
a Press [u].
¡Check the disc.
¡Load the disc again.
The player for some reason cannot read the file you are trying to play.
(File recorded in an unsupported file system, compression scheme, data
format, file name extension, damaged data, etc.)
a Select a file that the player can read. Confirm the type of data
recorded on the disc. Create a new disc if necessary.
*
A WMA file can be copyrighted.
a The file protected by copyright is not playable.
*
Specifications
General
FM Stereo Radio
Power Supply
Frequency Range
Usable Sensitivity
Stereo Separation
: DC 12 V (11 V - 16 V), Test
Voltage 14.4 V, Negative
Ground
Tone Controls (Bass)
: ±12 dB at 100 Hz
Tone Controls (Treble)
: ±12 dB at 10 kHz
Current Consumption
: Less than 2.5 A (CD mode,
0.5 W 4-Speaker)
Maximum Power Output : 50 W x 4 (at 4 Ω)(C1400N)
: 45 W x 4 (at 4 Ω)
(C1300AN/C1300GN)
Power Output
: 22 W x 4 (DIN45 324, at 4 Ω)
Speaker Impedance
: 4-8Ω
Pre-Amp Output Voltage : 2.5 V (CD mode)
Pre-Amp Output Impedance : 200 Ω
Dimensions (W x H x D)
: 178 x 50 x 155 mm
Weight
: 1.4 kg
* If all the files cannot be played, E4 or E5 remains on the display.
■ CD Changer
Display
Possible cause a Possible solution
: 87.5 - 108 MHz
: 6 dB/µV (S/N 30 dB)
: 35 dB (at 1 kHz)
MW Radio
Frequency Range
Usable Sensitivity
: 531 - 1 602 kHz
: 28 dB/µV (S/N 20 dB)
LW Radio
Frequency Range
Usable Sensitivity
: 153 - 279 kHz
: 32 dB/µV (S/N 20 dB)
CD Player
Sampling Frequency
DA Converter
Pick-Up Type
Light Source
Wavelength
Frequency Response
Signal to Noise Ratio
Total Harmonic Distortion
Wow and Flutter
Channel Separation
:
:
:
:
:
:
:
:
:
:
8 times oversampling
4 DAC System
Astigma 3-beam
Semiconductor laser
780 nm
5 Hz - 20 kHz (±1 dB)
96 dB
0.01 % (1 kHz)
Below measurable limits
75 dB
Disc is dirty, or is upside down.
Disc has scratches.
After 5 seconds
a Eject the magazine.
¡Check the disc.
¡Load the disc again.
To next disc automatically
No operation by some cause.
a Eject the magazine. If failure persists, press the reset switch on the
CD changer. If normal operation is not restored, call the store where
you purchased the unit or the nearest Panasonic Service Centre to ask
for repairs.
No disc is in the CD Changer (magazine).
a Insert discs into the changer (magazine).
38
Note: Specifications and design are subject to modification without notice due to improvements.
CQ-C1400N/1300AN/1300GN
Direct Sales at Panasonic UK
Sales and Support Information
Customer Care Centre
¡
¡
¡
¡
For UK customers: 08705 357357
For Republic of Ireland customers: 01 289 8333
Visit our website for product information
E-mail: [email protected]
¡ Order accessory and consumable items for your product
with ease and confidence by phoning our Customer Care
Centre Monday - Friday 9:00am - 5:30pm. (Excluding
public holidays).
¡ Or go on line through our Internet Accessory ordering
application at www.panasonic.co.uk.
¡ Most major credit and debit cards accepted.
¡ All enquiries transactions and distribution facilities are
provided directly by Panasonic UK Ltd.
¡ It couldn't be simpler!
¡ Also available through our Internet is direct shopping for
a wide range of finished products, take a browse on our
website for further details.
CQ-C1400N/1300AN/1300GN
39
Exclusively operated with 12-volt battery with
negative (–) ground.
Dieses Gerät ist ausschließlich für den Anschluss
an Bordnetze mit 12 V Batterie und negativer Klemme
an Masse bestimmt.
Alimentez l’appareil absolument par la batterie de 12
volts avec sa polarité négative (–) mise à la masse.
Uitsluitend voor gebruik met een 12 Volt accusysteem
met negatieve (–) aarding.
Wenden Sie sich zum Einbau an einen Fachmann.
●Probieren Sie den Radiobetrieb vor dem Einbau mit Antenne
und Lautsprechern aus.
Prenez contact avec un spécialiste pour le montage.
●Vérifiez l’autoradio avant de procéder au montage.
Vraag een vakman voor de installatie.
●Controleer voor de installatie of de radio werkt met de antenne en
de luidsprekers.
MP3 WMA CD Player/Receiver with CD Changer Control
CQ-C1400N
MP3 WMA CD Player/Receiver
CQ-C1300AN/C1300GN
Connect the power lead (red) very last.
(for non-ISO connector)
Schließen Sie den Versorgungsleiter
(rot) zum Schluss an (wenn kein ISOStecker verwendet wird).
Raccorder le fil d'alimentation (rouge)
en dernier. (pour un connecteur non-ISO)
Sluit de stroomdraad (rood) pas het allerlaatst aan. (voor een
●Mounting angle side to side : horizontal
front to rear : 0-30°
●Montagewinkel seitlich
: horizontal
vorne-hinten : 0-30°
●Angle de montage latéral
: horizontal
longitudinal : 0 à 30°
(CQ-C1400N)
niet-ISO aansluiting)
●Bevestigingshoek links/rechts : horizontaal
voor/achter : 0 - 30°
Installation Instructions
Einbauanleitung
Instructions d’installation
Installatiehandleiding
Connect the battery lead (yellow) to the positive (+) terminal of
the battery or fuse block terminal (BAT). (for non-ISO connector)
Schließen Sie das Batteriekabel (gelb) an die positive (+)
Klemme der Batterie oder an die (BAT) Klemme des
Sicherungsblocks an (wenn kein ISO-Stecker verwendet wird).
Connectez le fil (jaune) à la borne positive (+) de la batterie ou
à la borne (BAT) de la boîte à fusibles (pour un connecteur non-ISO).
Sluit de accudraad (geel) aan op de positieve (+) aansluiting van de
accu of van het zekeringenblok (BAT) (voor een niet-ISO aansluiting.).
30°
●Mounting space
●Einbauöffnung
●Espace nécessaire pour le montage
●Benodigde ruimte
Strip about 5 mm of the lead ends for connection (for non-ISO
53 mm
Deutsch
●Verify the radio using the antenna and speakers before installation.
connector).
Français
Consult a professional for installation.
English
Before Wiring/Vor der Verdrahtung
Avant le câblage/Voor het aansluiten van de bedrading
Nederlands
Before Installation/Vor dem Einbau
Avant l'installation/Voor de installatie
Entfernen Sie etwa 5 mm der Isolierung von den Kabelenden
für den Anschluss (wenn kein ISO-Stecker verwendet wird).
Dénudez les extrémités de fil de 5 mm environ pour la connexion
(pour un connecteur non-ISO).
Strip ongeveer 5 mm van de uiteinden van de draden om de
verbinding tot stand te kunnen brengen (voor een niet-ISO
aansluiting.).
182 mm
4.5 mm – 6.0 mm
Remove Mounting Collar q and Trim Plate r from the main
unit temporarily, which are already mounted at shipment.
Die bei der Lieferung montierte Einbauhalterung q und
Abdeckplatte r vorübergehend vom Gerät abmontieren.
Démontez provisoirement le cadre de montage q et la
plaque de garniture r de l’appareil principal, qui sont déjà
mis en place lors de l’expédition.
Verwijder de Bevestigingskraag q en de Afwerkingsrand r,
die bij het verlaten van de fabriek gemonteerd zijn,
tijdelijk van het hoofdtoestel.
Apply insulating tape to bare leads.
Isolieren Sie alle freiliegenden Leiter.
Recouvrez les fils nus d’un ruban isolant.
Isoleer blote draadeinden met
isolatieband.
Secure loosened leads.
Sichern Sie alle losen Leiter.
Resserrez les connexions de fils.
Zet loshangende draden vast.
Supplied Hardware/Mitgelieferte Hardware/Matériel d’installation/Meegeleverde onderdelen
No.
Item
Diagram
Mounting collar
Einbauhalterung
Cadre de montage
Bevestigingskraag
Q'ty No.
Item
Diagram
Trim plate
Abdeckplatte
Plaque de garniture
Afwerkingsrand
1
YEFX0215873
Q'ty
1
Mounting bolt (5 mmø)
Befestigungsschraube (5 mmø)
Boulon (5 mmø)
Bout (5 mmø)
1
ISO antenna adapter
ISO-Antennenadapter
Adaptateur d’antenne ISO
ISO antenne-adapter
1
Power connector
Versorgungsstecker
Connecteur d’alimentation
Stroomstekker
1
Lock cancel plate
Verriegelungsfreigabeplatte
Plaque anti-blocage
Ontgrendelingsplaat
2
YEAJ02874
TEXT
YEFC05609
●Please read these instructions carefully before using this product and keep this manual for future reference.
●Bitte lesen Sie diese Bedienungsanleitung vor der Verwendung dieses Produktes aufmerksam durch und bewahren
Sie sie danach für spätere Nachschlagzwecke sorgfältig auf.
●Prière de lire ces instructions attentivement avant d’utiliser le produit et garder ce manuel pour l’utilisation ultérieure.
●Leest u deze instructie alstublieft zorgvuldig door voor u dit product in gebruik neemt en bewaar deze handleiding voor later gebruik.
Matsushita Electric Industrial Co., Ltd.
Web Site : http://www.panasonic.co.jp/global/
YEFM293250 ND1203-0
＊ ②, ⑤ and ⑥ consist of a set. (YEP0FZ3264) ＊ ②, ⑤ und ⑥ bestehen als Satz. (YEP0FZ3264)
＊ ②, ⑤ et ⑥ constituent un jeu. (YEP0FZ3264) ＊ ②, ⑤ en ⑥ bestaan uit een set. (YEP0FZ3264)
Printed in China
Installation/Einbau/Montage/Installatie
How to install the unit/Einbau des Gerätes/Mode de montage de l’appareil/Installeren van het toestel
Cautions : ● Wear gloves for safety.
● Make sure that wiring is completed
before installation.
Vorsicht : ● Tragen Sie Handschuhe, um sich
1
Remove the cable from the battery negative terminal.
Trennen Sie das Kabel von der negativen Batterieklemme ab.
Retirer le câble de la borne négative de la batterie.
Koppel de kabel van de negatieve aansluiting van de accu los.
2
Mounting collar insertion
Bend mounting tabs.
Einsetzen der Einbauhülse
Biegen Sie die Einbaulaschen um.
Insertion du collier de fixation
Replier les languettes de fixation
Inbrengen bevestigingskraag
Buig bevestigingslipjes om.
3
Connection of power connector ③
Anschluss des Versorgungssteckers ③
Raccordement du connecteur d'alimentation ③
Aansluiten van de stroomstekker ③
vor Verletzungen zu schützen.
● Achten Sie vor dem Einbau darauf,
How to remove the unit/Ausbau des Gerätes
Dépose de l’appareil/Verwijderen van het toestel
1
Remove the front panel.
Nehmen Sie das
Bedienteil ab.
Retirez le panneau de
façade.
Verwijder het voorpaneel.
2
Remove the trim plate ④.
Entfernen Sie die
Abdeckplatte ④.
Enlevez la plaque de
garniture ④.
Verwijder de afwerkingsrand ④.
3
Lock release
dass die Verdrahtung fertiggestellt ist.
Précautions: ● Porter des gants à des fins de sécurité.
● S'assurer que le câblage est terminé avant
l'installation.
Let op:
● Draag handschoenen voor uw veiligheid.
● Controleer of de bedrading correct is aangelegd
voor u gaat installeren.
4
4
Bend appropriate tabs to secure the unit
without backlash.
Die entsprechenden Einbaulaschen so
umbiegen, dass das Gerät ohne Spielraum
fest sitzt.
Replier les languettes
de fixation appropriées
pour immobiliser
l'appareil sans
contrecoup.
Buig de juiste lipjes om
zodat het toestel vast
zit zonder speling.
q
w
q Screw the bolt into the main unit.
w Secure the rear of the main unit.
e Snap the right and left springs into each hole.
Befestigung des
q Schrauben Sie die Schraube in das Hauptgerät.
Hauptgerätes
w Sichern Sie die Rückseite des Hauptgerätes.
e Lassen Sie die rechten und linken Federn in den
löchern einschnappen.
Fixation de l'appareil q Visser le boulon dans l'appareil principal.
principal
w Fixer l'arrière de l'appareil principal.
e Bouteroller les ressorts droit et gauche dans chaque trou.
Vastzetten
q Schroef de bout in het hoofdtoestel.
hoofdtoestel
w Zet de achterkant van het hoofdtoestel vast.
e Pas de rechter en linker veren in de
bijbehorende gaten.
Main unit securing
q
w
q
q Insert the lock cancel plate ⑥
until you hear a click.
w Pull the main unit while
pushing the plate inward.
Freigabe der Verriegelung
4
4
w
e
Securing to fire wall
Befestigung an Brandschutzwand
Obtenir un pare-feu
Vastzetten aan het brandschot
Using the rear support strap (Option)
Verwendung der Einbauleiste (Option)
Utiliser de la barrette de support arrière (Option)
Gebruik van de achter-steunstrip (optioneel)
3mm
Using the rubber cushion (Option)
Verwendung des Gummikissens (Option)
Utiliser la bague d'amortisseur en caoutchouc (Option)
Gebruik van het rubber stootkussen (optioneel)
Tapping screw (Option)
Blechschraube (Option)
Vis taraudeuse (option)
Zelftappende schroef
(los verkrijgbaar)
Rubber cushion (Option)
Gummikissen (Option)
Canon en caoutchouc (option)
Stootrubber (los verkrijgbaar)
Rear support strap (Option)
Einbauleiste (Otpion)
Plaque-support arrière (option)
Achter-steunstrip
Rear support bracket
(los verkrijgbaar)
(supplied with car)
Einbauleiste (vorhanden im
Fahrzeug)
Support arrière
Hexagonal nut (Option)
To the unit
Sechskantmutter (Option) An das Gerät (fourni avec votre voiture)
Ecrou hexagonal (option) Côté appareil Achter-steunbeugel
Zeskantige moer
Naar het toestel (behorend bij de auto)
(los verkrijgbaar)
To the unit
An das Gerät
Côté appareil
Naar het toestel
Clank!
5
6
IMPORTANT
When this unit is installed in dashboard,
ensure that there is sufficient air flow
around the unit to prevent damage from
overheating, do not block any ventilation
holes on the unit.
WICHTIG
Bei Einbau des Geräts im Armaturenbrett
sollte darauf geachtet werden, dass der
Luftstrom um das Gerät nicht behindert ist,
um Beschädigung durch Überhitzen zu
verhindern, und die Belüftungsöffnungen
des Geräts nicht blockiert sind.
Trim plate ④ mounting
IMPORTANT
Anbringen der Abdeckplatte ④
Installation de la plaque de garniture ④ Lorsque cet appareil est installé dans le
Bevestigen van de afwerkingsrand ④ tableau de bord, assurez-vous qu'il y a une
circulation d'air suffisante autour de
Battery Cable reconnection
l'appareil afin d'éviter tout endommagement
Wiederanschließen des Kabels
provoqué par une surchauffe et qu'aucun
Rebranchement du câble
trou d'aération de l'appareil n'est obturé.
Opnieuw aansluiten kabel
BELANGRIJK
Wanneer dit toestel in het dashboard wordt
geïnstalleerd, moet u ervoor zorgen dat er
voldoende ventilatie is rond het toestel. Om
oververhitting te voorkomen mogen de
ventilatie-openingen in het toestel niet
afgedekt worden.
q Führen Sie die
Verriegelungsfreigabeplatte ⑥,
bis Sie ein Klickgeräusch
vernehmen können.
w Ziehen Sie an dem Hauptgerät,
während Sie die Platte
hineindrücken.
w
Libération du verrouillage
q Introduisez la plaque anti-blocage
⑥ jusqu’à entendre un clic.
w Dégager l'appareil principal
tout en repoussant la plaque
vers l'intérieur.
Ontgrendeling
q Steek de ontgrendelingsplaat ⑥
naar binnen tot u een klik hoort.
w Trek het hoofdtoestel naar
buiten terwijl u de plaat naar
binnen drukt.
4
Pull out the unit with
both hands.
Ziehen Sie das Gerät mit
beiden Händen heraus.
Retirez l’appareil à deux
mains.
Trek het toestel met beide
handen naar buiten.
Wiring/Verdrahtung/Câblage/Bedrading
CD Changer Input Connector
The RCA cord of a CD changer (ex. CX-DP880N) should be connected.
CD-Wechsler-Eingangssteckverbinder
Hier das RCA-Kabel eines CD-Wechslers (z.B. CX-DP880N) anschließen.
Connecteur d'entrée de changeur de disque CD
Le cordon RCA d'un sélecteur de changeur de disque CD (expl. CX-DP880N) doit être raccordé.
Ingangsaansluiting CD-wisselaar
Sluit het RCA (tulpstekker) snoer van de CD-wisselaar (bijv. CX-DP880N) aan.
ISO Antenna Adapter (If needed)
ISO-Antennen-adapter
(falls erfor derlich)
Adaptateur d'antenne ISO
(si nécessaire)
ISO antenne-adapter (Indien nodig)
(R)/(R)/(D)/(R)
Antenna
Antenne
Antenne
Antenne
Warning: Do not connect the power connector until the whole wiring is completed.
Warnung: Schließen Sie den Versorgungsstecker erst an, nachdem die gesamte
Verdrahtung beendet wurde.
Avertissement: Ne pas raccorder le connecteur d'alimentation tant que la totalité
des câblages n'est pas complètement terminée.
Waarschuwing: Sluit de stroomstekker pas aan wanneer de volledige bedrading
is aangesloten.
Only for CQ-C1400N
nur für CQ-C1400N
uniquement pour le
modèle CQ-C1400N
Alleen voor de CQ-C1400N
(L)/(L)/(G)/(L)
CD.C-IN
(R)/(R)/(D)/(R)
CD Changer Control Connector The DIN cord of a CD changer (ex. CX-DP880N) should be connected.
Steckverbinder der CD-Wechslersteuerung Hier das DIN-Kabel eines CD-Wechslers (z.B. CX-DP880N) anschließen.
Connecteur de commande de changeur de disque CD
Le cordon DIN d'un changeur de disque CD (expl. CX-DP880N) doit être raccordé.
Stekker CD-wisselaar bediening Sluit het DIN snoer van de CD-wisselaar (bijv. CX-DP880N) aan.
(L)/(L)/(G)/(L)
Fuse (15 A) Refer fuse replacement to your nearest authorized Panasonic
Service Center. Do not try fuse replacement by yourself.
Sicherung (15 A) Wenden Sie sich zum Austausch der Sicherung an eine
autorisierte Panasonic-Kundendienststelle in Ihrer Nähe. Versuchen Sie nicht,
den Austausch selbst vorzunehmen. Steckverbinder am Fahrzeug
Fusible (15 A) Confier le remplacement de fusible au centre de service de
service après-vente Panasonic agréé le plus proche. Ne pas essayer de
remplacer le fusible tout(e) seul(e).
Zekering (15 A) Laat het vervangen van de zekering over aan uw dichtstbijzijnde
Panasonic service-centrum. Probeer in geen geval zelf de zekering te vervangen.
3
1
2
C1 :
(Orange)/(Orange)/(Orange)/(Oranje)
Preamp Out Connector (Rear)
Vorverstärker-Ausgang (Rückseite)
Connecteur de sortie de préamplificateur (arrière)
Uitgangsaansluiting voorversterker (achter)
C3 :
(Brown w/black stripe)/(Braun mit schwarzem Streifen)/
(Brun à rayures noires)/(Bruin met zwarte streep)
External Remote Control Lead
When using a non-Panasonic external remote control,
refer to the manufacture for their product before connecting.
Leitungsdraht für externe Fernbedienung
Wenn Sie eine externe Fernbedienung verwenden, die nicht von Panasonic
hergestellt wurde, wenden Sie sich vor dem Anschluss an den Hersteller
des Produktes.
Fil de la télécommande extérieure
En cas d’utilisation d’une télécommande extérieure non-Panasonic, se
référer aux conseils du fabricant concerné pour les connexions électriques.
Externe afstandsbedieningsdraad
Bij gebruik van een externe afstandsbediening die niet van Panasonic is,
dient u voor aansluiting de handleiding of de fabrikant van het product in
kwestie te raadplegen.
Preamp Out Connector (Front)
Only for CQ-C1400N
Vorverstärker-Ausgang (Vorderseite)
nur für CQ-C1400N
Connecteur de sortie de préamplificateur (avant)
uniquement pour le modèle CQ-C1400N
Uitgangsaansluiting voorversterker (voor)
Alleen voor de CQ-C1400N
A7 :
External Mute Lead
To the Navi Mute lead of the Panasonic car navigation system
or car telephone mute lead.
Externe-Stummschaltungskabel
An das Navigationssystem-Stummschaltungskabel des
Panasonic Navigationssystems oder an das
Autotelefon-Stummschaltungskabel.
Fil de Mise en sourdine extérieure
A raccorder au fil Navi Mute du système de navigation automobile de
Panasonic ou au fil de mise en sourdine du téléphone pour véhicule.
Externe-geluiddempingsdraad
Naar de Navi Mute draad van een Panasonic auto-navigatiesysteem
of naar de dempingsdraad voor deautotelefoon.
(Red)/(Rot)/(Rouge)/(Rood)
Power Lead (ACC or IGN) To ACC power, +12V DC.
Versorgungskabel (ACC oder IGN) An die ACC-Stromklemme, +12 V Gleichspannung.
Fil d’alimentation (ACC ou IGN) A l’alimentation ACC, +12V CC
Stroomdraad (ACC of IGN) Naar ACC stroomvoorziening, + 12 V gelijkstroom.
A5
ISO Connector
ISO-Stecker
Connecteur ISO
ISO aansluiting
ACC
(Black)/(Schwarz)/(Noir)/(Zwart)
A8 :
A
A
A
A
Ground Lead To a clean, bare metallic part of the car chassis.
Massekabel An ein sauberes, metallisches Teil des Fahrzeugchassis.
Fil de mise à la masse A une partie métallique propre découverte du châssis de voiture
Aarding Naar een schoon, bloot metalen onderdeel van het chassis.
BATTERY 15A
A
A4 :
(Yellow)/(Gelb)/(Jaune)/(Geel)
Battery Lead To the car battery, continuous +12 V DC.
Batteriekabel An die Batterie des Fahrzeuges, kontinuierlich +12 V Gleichspannung.
Fil de batterie A la batterie de voiture, alimentation continue de +12 V CC
Accudraad Naar de accu van de auto, doorlopende stroomvoorziening + 12 V gelijkstroom.
A5 :
B
(Blue w/white stripe)/(Blau mit weißem Streifen)/(Bleu à rayures blanches)/(Blauw met witte streep)
Motor Antenna Relay Control Lead To Motor Antenna. (Max. 500 mA) (This lead is not intended for use with a switch actuated power antenna)
Amp·Relay Control Power Lead To Panasonic power amplifier. (synchronized with the power on/off of amplifier)
Steuerkabel für Relais der motorbetriebenen Antenne Zu motorbetriebenen Antenne (max. 500 mA) (Dieses Kabel dient nicht für die
Verwendung mit einer über einen Schalter aktivierten motorbetriebenen Antenne.)
Verstärker/Relais-Steuerstromleiter An den Panasonic Leistungsverstärker (synchronisiert mit der Ein/Ausschaltung des Verstärkers).
Fil de commande de relais d’antenne motorisée A l’antenne motorisée (500 mA maxi.) (Ce fil n’est pas conçu pour l’usage avec l’antenne
commandée par interrupteur.)
Cordon d’alimentation de la commande de relais d’amplificateur A l’amplificateur de puissance de Panasonic (synchronisé à la mise sous/hors
tension de l’amplificateur)
Stuurdraad relais gemotoriseerde antenne Naar de gemotoriseerde antenne. (Max. 500 mA) (Deze draad is niet bedoeld voor een
gemotoriseerde antenne die met een schakelaar wordt ingeschakeld.)
Stuurstroomdraad versterker relais
Naar de Panasonic eindversterker. (Gesynchroniseerd met het in-/uitschekelen van de stroom voor de versterker.)
A
Only for CQ-C1400N/nur für CQ-C1400N/uniquement pour le modèle CQ-C1400N/Alleen voor de CQ-C1400N
System Upgrade Example : Connecting with a CD changer/Beispiel für die Systemerweiterung: Anschluss an einen CDWechsler/Exemple de mise à niveau de système : Raccordement à un changeur de disque CD/Voorbeeld uitbreiding systeem: aansluiten van een CDwisselaar
(Option)
(Option)
(Option)
(Optioneel)
Ground Lead
Massekabel
Fil de masse
Massadraad
(L)/(L)/(G)/(L)
CD·C-IN
DIN Cord
DIN-Kabel
Cordon DIN
DIN snoer
(R)/(R)/(D)/(R)
- B8
B8 :
ISO Connector
ISO-Stecker
Connecteur ISO
ISO aansluiting
B5 :
Battery Lead
Batteriekabel
Fil de batterie
Accudraad
RCA Cord
Cinch-Kabel
Cordon RCA
RCA-(tulp) snoer
B7 :
Rear Left + (Green)
Hinten Links + (Grün)
Arrière gauche + (Vert)
Links achter + (Groen)
CX-DP880N
Rear Left – (Green w/black stripe)
Hinten Links – (Grün mit schwarzem Streifen)
Arrière gauche – (Vert à rayures noires)
Links achter – (Groen met zwarte streep)
B
B
B
B
Front Left – (White w/black stripe)
Vorne Links – (Weiß mit schwarzem Streifen)
Avant gauche – (Blanc à rayures noires)
Links voor – (Wit met zwarte streep)
B3 :
B4 :
Front Right + (Gray)
Vorne Rechts + (Grau)
Avant droit + (Gris)
Rechts voor + (Grijs)
Front Right – (Gray w/black stripe)
Vorne Rechts – (Grau mit schwarzem Streifen)
Avant droit – (Gris à rayures noires)
Rechts voor – (Grijs met zwarte streep)
B1 :
B2 :
Rear Right + (Violet)
Hinten Rechts + (Violett)
Arrière droit + (Violet)
Rechts achter + (Paars)
Rear Right – (Violet w/black stripe)
Hinten Rechts – (Violett mit schwarzem Streifen)
Arrière droit – (Violet à rayures noires)
Rechts achter – (Paars met zwarte streep)
+
- B6
B5 +
B6 :
B
Front Left + (White)
Vorne Links + (Weiß)
Avant gauche + (Blanc)
Links voor + (Wit)
B7 +
- B2
-
B1 +
- B4
B3 +
CQ-C1400N
Power connector/Versorgungsstecker/Connecteur d’alimentation/Stroomstekker
Standard ISO/ISO-Standard/Normes ISO/Standaard ISO
A7
A4
IGN or ACC 12 V supply
12 V-Versorgung
(IGN/ACC)
Alimentation 12 volts en
IGN ou ACC
IGN of ACC 12 V
stroomvoorziening
12 V Batteries (Continuous supply)
12 V-Batterie (Dauerversorgung)
Batterie de 12 volts (alimentation continue)
12 V accu (doorlopende stroomvoorziening)
(❈)
ACC
Car-side connector
Steckverbinder am Fahrzeug
Connecteur côté voiture
Stekker aan autozijde
BATTERY 15A
(❈)
Car Type A/Kraftfahrzeug des Typs A/Type de voiture A/Autotype A
A4
A7
IGN or ACC 12 V supply
12 V-Versorgung
(IGN/ACC)
Alimentation 12 volts en
IGN ou ACC
IGN of ACC 12 V
stroomvoorziening
12 V Batteries (Continuous supply)
12 V-Batterie (Dauerversorgung)
Batterie de 12 volts (alimentation continue)
12 V accu (doorlopende stroomvoorziening)
●The pin arrangement of the power connector
conforms to ISO standard.
●Please check that the pin arrangement of the
connector in your car conforms to ISO standard.
●For car types A and B, change the wiring of the
red and yellow leads as shown at below.
●After connection, insulate the portions marked (❈)
with insulating tape.
Note: For cars other than types standard, A and B,
please consult your local car shop.
Connect as follows.
Nehmen Sie den Anschluss wie folgt vor.
Branchez les haut-parleurs comme suit.
Sluit de luidsprekers als volgt aan.
L
Vorsichtsmaßregeln (ISO-Stecker)
●Die Stiftbelegung des Versorgungssteckers entspricht
em ISO-Standard.
●Bitte stellen Sie sicher, dass die Stiftbelegung
des Steckers in Ihrem Fahrzeug dem ISO-Standard
entspricht.200
●Für Fahrzeuge der Typen A und B, ändern Sie die
Verdrahtung der roten und gelben Leiter gemäß Abbildung.
●Nach dem Anschluss isolieren Sie die mit (❈) markierten
Abschnitte mit Isolierband.
Hinweis: Für andere Fahrzeuge als Typ A und B, wenden
Sie sich bitte an eine örtliche Pkw-Werkstatt.
Car-side connector
Steckverbinder am Fahrzeug
Connecteur côté voiture
Stekker aan autozijde
BATTERY 15A
ACC
(❈)
Car Type B/Kraftfahrzeug des Typs B/Type de voiture B/Autotype B
A4
A7
No connection
Kein Anschluss
Aucune connexion
Geen aansluiting
12 V Batteries (Continuous supply)
12 V-Batterie (Dauerversorgung)
Batterie de 12 volts (alimentation continue)
12 V accu (doorlopende stroomvoorziening)
(❈)
ACC
BATTERY 15A
(❈)
●La disposition des broches du connecteur d'alimentation
est conforme à la norme ISO.
●Veuillez vérifier si que la disposition des broches du
connecteur d'alimentation dans votre voiture est conforme
à la norme ISO.
●Pour les types de voiture A et B, changer le câblage des
fils rouge et jaune comme indiqué ci-dessous.
●Après avoir fait les connexions, isoler les sections
marquées (❈) avec de la bande isolante.
Remarque: Pour les voitures autres que des types A et B,
veuillez consulter votre magasin de matériel automobile local.
Voorzorgen (ISO stekker)
●De pen-configuratie van de stroomstekker voldoet aan de
ISO standaard.
●Controleer of de pen-configuratie van de stekker in uw
auto eveneens voldoet aan de ISO standaard.
●Voor auto's van type A en B, dient u de bedrading voor de rode
en gele draden te wijzigen zoals hieronder staat aangegeven.
●Na het aansluiten dient u de gedeelten die met (❈)
gemarkeerd zijn met isolatieband af te plakken.
Opmerking: Voor andere auto's dan die van type A en B
dient u uw garage te raadplegen.
●Use ungrounded speakers only.
Allowable input : 45 W or more (CQ-C1300AN/C1300GN)
: 50 W or more (CQ-C1400N)
Impedance : 4 – 8 Ω
●Distance between speaker and amplifier: 30 cm or more
●Verwenden Sie nur nicht geerdete Lautsprecher.
Zulässige Belastbarkeit : 45 W oder mehr (CQ-C1300AN/C1300GN)
: 50 W oder mehr (CQ-C1400N)
Impedanz : 4 – 8 Ω
●Entfernung zwischen Lautsprecher und Verstärker: 30 cm oder mehr
R
●Utilisez uniquement des haut-parleurs non reliés à la masse.
Puissance d'entrée admissible : 45 W ou davantage
(CQ-C1300AN/C1300GN)
: 50 W ou davantage (CQ-C1400N)
Impédance: 4 – 8 Ω
●Distance entre le haut-parleur et l'amplificateur: 30 cm ou davantage
●Gebruik uitsluitend ongeaarde luidsprekers.
Toegestaan ingangsvermogen : 45 W of hoger
(CQ-C1300AN/ C1300GN)
: 50 W of hoger (CQ-C1400N)
Impedantie: 4 - 8 Ω
●Afstand tussen luidspreker en versterker: 30 cm of meer
Précautions (Connecteur ISO)
(❈)
Car-side connector
Steckverbinder am Fahrzeug
Connecteur côté voiture
Stekker aan autozijde
Precautions (ISO Connector)
Speaker Connection/Anschluss der Lautsprecher/Branchement avec les haut-parleurs/Aansluiten van de luidsprekers
●Do not connect more than one speaker to
one set of speaker leads. (except for connecting to
a tweeter)
●Schließen Sie niemals mehr als einen Lautsprecher
an einen Satz Lautsprecherleiter an. (außer bei
Anschluss eines Hochtonlautsprechers)
●Ne raccorder pas plus d'un haut-parleur à un
ensemble de fils de haut-parleur. (Sauf lors du
raccordement à un tweeter)
●Sluit niet meer dan één luidspreker aan op één paar
luidsprekerdraden. (Behalve bij aansluiting op een
tweeter.)
●Do not use a 3-wire type speaker system
having a common earth lead.
●Verwenden Sie niemals Lautsprechersysteme mit
Dreierverkabelung, die einen gemeinsamen
Erdungsleiter aufweist.
●Ne pas utiliser pas de système de haut-parleur
de type à 3 fils ayant un fil de mise à la masse
commun.
●Gebruik geen luidsprekersysteem met drie
draden en een gedeelde aarddraad.