Panasonic | CQC5300W | Operating instructions | Panasonic CQC5300W Operating Instructions

Panasonic CQC5300W Operating Instructions
E
N
G
L
I
S
H
E
N
G
L
I
S
H
Radio
(Stereo) indicator
[%] [$] (TUNE)
Direct Memory (D·M)
Station Preset
5
6
This is a useful function that can call broadcast
stations directly during playback in other modes (CD,
CD Changer, etc.), even when the power is off.
[DISP]
(Display)
[SOURCE]
[D·M] (Direct Memory)
Preset buttons [1] to [6]
(Preset station)
1 Radio Mode
Press [SOURCE] to select the radio mode.
[BAND]
(APM: Auto Preset Memory)
Your favorite radio station can be memorized in
[D·M] (direct memory).
Default: FM 87.50 MHz
∫ Memorize
1 Select a band and frequency.
2 Press and hold [D·M] for more than 2 seconds.
≥ Frequency is saved in the memory.
Display Change
Press [DISP] (display).
Radio mode display
Radio mode display
(default)
Note:
≥ New stations overwrite existing saved stations
after following this procedure.
Band
Clock display
∫ Recalling the Direct Memory
Frequency
Up to 6 stations can be stored in each of the FM1,
FM2, FM3 and AM band selections.
Caution:
≥ To ensure safety, never attempt to preset
stations while you are driving.
Auto Preset Memory (APM)
Automatically save stations with good reception in
the preset memory.
1 Select a band (previous page).
2 Press and hold [BAND] (APM: Auto Preset
Memory) for more than 2 seconds.
≥ The 6 stations with good reception will be
automatically saved in the memory under
preset number 1 to 6.
≥ Once set, the preset stations are sequentially
scanned for 5 seconds each (scanning).
Press [D·M].
2 Band
Press [BAND].
Display off
Direct Memory mode
Press [D·M] again to cancel.
Manual Preset Memory
Manually save a station in the preset memory.
1 Select a band and frequency (previous page).
2 Press and hold one of the buttons from [1] to [6]
until the display blinks once.
Preset number
3 Tuning
[$]: Higher frequency
[%]: Lower frequency
Press and hold [%] or [$] for more than
0.5 seconds, then release. Seeking will start.
Note:
≥ To stop scanning, press one of the buttons from
[1] to [6].
≥ New stations overwrite existing saved stations
after this procedure.
Preset Station Calling
1 Select a band (previous page).
2 Press one of the preset buttons from [1] to [6].
28
CQ-C5400/5300/5100W
CQ-C5400/5300/5100W
29
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising