Panasonic CQD5501N Operating instructions

Panasonic CQD5501N Operating instructions
DVD Player/Receiver with CD Changer Control
CQ-D5501N
CQ-D5501N
CQ-D5501N
AF
PTY
TA
MUTE/SQ
Operating Instructions
Bedienungsanleitung
Manuel d’instructions
Gebruiksaanwijzing
Bruksanvisning
Manuale di istruzioni
Manual de Instrucciones
Brugsvejledning
Instrukcja obs¬ugi
Návod k obsluze
Használati utasítások
àÌÒÚÛ͈Ëfl ÔÓ ˝ÍÒÔÎÛ‡Ú‡ˆËË
®
TEXT
Matsushita Electric Industrial Co., Ltd.
Web Site : http://www.panasonic.co.jp/global/
YEFM285698 NT0205-1035
Printed in China
¡Please read these instructions carefully before using this product and keep this manual for future reference.
¡Bitte lesen Sie diese Bedienungsanleitung vor der Verwendung dieses Produktes aufmerksam durch und bewahren Sie sie
danach für spätere Nachschlagzwecke sorgfältig auf.
¡Prière de lire ces instructions attentivement avant d’utiliser le produit et garder ce manuel pour l’utilisation ultérieure.
¡Leest u deze instructie alstublieft zorgvuldig door voor u dit product in gebruik neemt en bewaar deze handleiding voor later
gebruik.
¡Läs igenom denna bruksanvisning noga innan produkten tas i bruk. Spara bruksanvisningen för framtida behov.
¡Si prega di leggere attentamente queste istruzioni prima di usare questo prodotto e di conservare questo manuale per usi futuri.
¡Lea con atención estas instrucciones antes de utilizar el producto y guarde este manual para poderlo consultar en el futuro.
¡Læs venligst denne brugsvejledning grundigt, inden dette produkt tages i brug og gem den til senere konsultation.
E
N
G
L
I
S
H
1
Safety Information
■ Read the operating instructions for the unit and all other components of your car audio system carefully before using the
system. They contain instructions about how to use the system in a safe and effective manner. Panasonic assumes no
responsibility for any problems resulting from failure to
observe the instructions given in this manual.
Warning
This pictograph intends to alert you to the presence of important operating instructions and
installation instructions. Failure to heed the
instructions may result in severe injury or death.
Warning
Observe the following warnings when using
this unit.
❑ The driver should neither watch the display nor
operate the system while driving.
Watching the display or operating the system will distract
the driver from looking ahead of the vehicle and can cause
accidents. Always stop the vehicle in a safe location and use
the parking brake before watching the display or operating
the system.
❑ Use the proper power supply.
This product is designed for operation with a negative
grounded 12 V DC battery system. Never operate this product with other battery systems, especially a 24 V DC battery
system.
❑ Keep batteries out of reach of infants.
Batteries can be ingested, so keep them out of the reach of
infants. If an infant ingests a battery, please seek immediate
medical attention.
❑ Protect the Deck Mechanism.
Do not insert any foreign objects into the slot of this unit.
❑ Do not disassemble or modify the unit.
Do not disassemble, modify the unit or attempt to repair the
product yourself. If the product needs to be repaired, consult your dealer or an authorized Panasonic Service Centre.
❑ Do not use the unit when it is out of order.
If the unit is out of order (no power, no sound) or in an
abnormal state (has foreign objects in it, is exposed to
water, is smoking, or smells), turn it off immediately and
consult your dealer.
❑ The remote control unit should not lie about in the
car.
If the remote control unit lies about, it could fall on the floor
while driving, get wedged under the brake pedal, and lead to
a traffic accident.
❑ Refer fuse replacement to qualified service personnel.
When the fuse blows out, eliminate the cause and have it
replaced with the fuse prescribed for this unit by a qualified
service engineer. Incorrect replacement of the fuse may lead
to smoke, fire, and damage to the product.
■ This manual uses pictographs to show you how to use the
product safely and to alert you to potential dangers resulting
from improper connections and operations. The meanings of
the pictographs are explained below. It is important that you
fully understand the meanings of the pictographs in order to
use this manual and the system properly.
Caution
This pictograph intends to alert you to the presence of important operating instructions and
installation instructions. Failure to heed the
instructions may result in injury or material damage.
Observe the following warnings when
installing.
❑ Disconnect the lead from the negative (–) battery
terminal before installation.
Wiring and installation with the negative (–) battery terminal
connected may cause electrical shock and injury due to a
short circuit.
Some cars equipped with the electrical safety system have
specific procedures of battery terminal disconnection.
FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TO THE
UNINTENDED ACTIVATION OF THE ELECTRICAL SAFETY
SYSTEM RESULTING IN DAMAGE TO THE VEHICLE AND
PERSONAL INJURY OR DEATH.
❑ Never use safety-related components for installation, grounding, and other such functions.
Do not use safety-related vehicle components (fuel tank,
brake, suspension, steering wheel, pedals, airbag, etc.) for
wiring or fixing the product or its accessories.
❑ Installing the product on the air bag cover or in a
location where it interferes with airbag operation is
prohibited.
❑ Check for piping, gasoline tank, electric wiring, and
other items before installing the product.
If you need to open a hole in the vehicle chassis to attach or
wire the product, first check where the wire harness, gasoline tank, and electric wiring are located. Then open the hole
from outside if possible.
❑ Never install the product in a location where it interferes with your field of vision.
❑ Never have the power cord branched to supply other
equipment with power.
❑ After installation and wiring, you should check the
normal operation of other electrical equipment.
The continuation of their using in abnormal conditions may
cause fire, electrical shock or a traffic accident.
❑ In the case of installation to an airbag-equipping
car, confirm warnings and cautions of the vehicle
manufacturer before installation.
❑ Make sure the leads do not interfere with driving or
getting in and out of the vehicle.
❑ Insulate all exposed wires to prevent short circuiting.
Caution
Observe the following cautions when using this
unit.
❑ Keep the sound volume at an appropriate level.
Keep the volume level low enough to be aware of road and
traffic conditions while driving.
❑ Do not insert or allow your hand or fingers to be
caught in the unit.
To prevent injury, do not get your hand or fingers caught in
moving parts or in the disc slot. Especially watch out for
infants.
❑ This unit is designed for use exclusively in automobiles.
❑ Do not operate the unit for a prolonged period with
the engine turned off.
Operating the audio system for a long period of time with the
engine turned off will drain the battery.
❑ Do not expose the unit to direct sunlight or excessive heat.
Otherwise these will raise the interior temperature of the
unit, and it may lead to smoke, fire, or other damage to the
unit.
❑ Do not use the product where it is exposed to water,
moisture, or dust.
Exposure of the unit to water, moisture, or dust may lead to
smoke, fire, or other damage to the unit. Make especially
sure that the unit does not get wet in car washes or on rainy
days.
❑ Do not install the product where it is exposed to
strong vibrations or is unstable.
Avoid slanted or strongly curved surfaces for installation. If
the installation is not stable, the unit may fall down while
driving and this can lead to an accident or injury.
The product should be installed in a horizontal position with
the front end up at a convenient angle, but not more than
30˚.
The user should bear in mind that in some areas there may
be restrictions on how and where this unit can be installed.
Consult your dealer for further details.
❑ Wear gloves for safety. Make sure that wiring is
completed before installation.
❑ To prevent damage to the unit, do not connect the
power connector until the whole wiring is completed.
❑ Do not connect more than one speaker to one set of
speaker leads. (except for connecting to a tweeter)
Observe the following cautions when handling
the battery for the remote control unit.
● Use only specified battery (CR2025).
● Match the polarity of the battery with the (+) and (–) marks
in the battery case.
● Replace dead battery as soon as possible.
● Remove the battery from the remote control unit when not
using it for an extended period of time.
● Insulate the battery (by placing them in a plastic bag or covering them with vinyl tape) before disposal or storage.
● Dispose of the battery according to the local regulations.
● Do not disassemble, recharge, heat or short the battery. Do
❑ Refer wiring and installation to qualified service
personnel.
In case of battery leakage
● Thoroughly wipe the battery liquid off the battery case and
❑ Follow the instructions to install and wire the product.
2
❑ Installation Angle
Observe the following cautions when
installing.
Installation of this unit requires special skills and experience.
For maximum safety, have it installed by your dealer.
Panasonic is not liable for any problems resulting from your
own installation of the unit.
E
N
G
L
I
S
H
not throw a battery into a fire or water.
insert new battery.
● If any part of your body or clothing comes into contact with
battery liquid, wash it with plenty of water.
● If battery liquid comes into contact with your eyes, wash
them with plenty of water and get immediate medical attention.
Not following the instructions to properly install and wire the
product could cause an accident or fire.
❑ Take care not to damage the leads.
When wiring, take care not to damage the leads. Prevent
them from getting caught in the vehicle chassis, screws, and
moving parts such as seat rails. Do not scratch, pull, bend or
twist the leads. Do not run them near heat sources or place
heavy objects on them. If leads must be run over sharp
metal edges, protect the leads by winding them with vinyl
tape or similar protection.
❑ Use the designated parts and tools for installation.
Use the supplied or designated parts and appropriate tools
to install the product. The use of parts other than those supplied or designated may result in internal damage to the unit.
Faulty installation may lead to an accident, a malfunction or
fire.
❑ Do not block the air vent or the cooling plate of the
unit.
Blocking these parts will cause the interior of the unit to
overheat and will result in fire or other damage.
2
CQ-D5501N
CQ-D5501N
3
E
N
G
L
I
S
H
Safety Information (continued)
Panasonic welcomes you to our constantly growing family of electronic products owners.
We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully
selected components, and assembled by people who are proud of the reputation their work has built for our company. We
know this product will bring you many hours of enjoyment, and after you discover the quality, value and reliability we have
built into it, you too will be proud to be a member of our family.
Laser Product
3
4
Accessories
Label Indications and Their Locations
E
N
G
L
I
S
H
CLASS 1 LASER PRODUCT
CAUTION
LASER RADIATION
WHEN OPEN.
DO NOT STARE INTO BEAM.
XXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
OO-OOOOO
Caution Label
Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
Do not take apart this unit or attempt to make any changes
yourself.
This unit is a very intricate device that uses a laser pickup to retrieve
information from the surface of compact discs. The laser is carefully
shielded so that its rays remain inside the cabinet.
Therefore, never try to disassemble the player or alter any of its parts
since you may be exposed to laser rays and dangerous voltages.
FÖRSIKTIGHET –
LASERSTRÅLNING I
ÖPPNAT LÄGE. UNDVIK
ATT UTSÄTTAS FÖR
STRÅLEN.
ATTENTION –
RAYONNEMENT LASER
SI OUVERT, ÉVITER
TOUTE EXPOSITION AU
FAISCEAU.
AD VAR SEL – LASER STRÅLING.
UNNGÅ
EKSPON ER IN G F OR
STRÅLEN VED ÅPNING.
ADVARSEL – LASER
UDSENDES NÅR DER
ER ÅBNET. UNDGÅ
UDSÆTTELSE FOR
STRÅLER.
ÇçàåÄçàÖ – ãÄáÖêçéÖ
àáãìóÖçàÖ
èêà
éíäêõíàà. àáÅÖÜÄíú
ÇéáÑÖâëíÇàü ãÄáÖêçéÉé
àáãìóÖçàü.
Operating
Instructions
Q'ty: 2
ISO Antenna
Adapter
Q'ty: 1
Q'ty: 1
Clip
Connector
Q'ty: 1
Q'ty: 1
Installation kit (YEP0FZ5725)
Q'ty: 1
POWER
SOURCE
STOP
PAUSE
PLAY
3
SEL
SRC
TRACK / SEARCH
RETURN
RET
TITLE
MENU
EN
1
2
SUBTITLE AUDIO ANGLE
4
5
6
RANDOM
SCAN
REPEAT
8
9
7
VOL
TRACK
GRP
0
MUTE
DRC TITLE / CHAPTER
CAR AV
For your safety, this system is designed not to see the moving
picture while you are driving.
Warning
¡ Park your car in a safe place and use the parking brake lever
before seeing the moving picture.
¡ For your safety, you must ensure that the connection of the
parking brake lead is correct. (a Page 57)
Power
Connector
Mounting
Collar
Removable
Face Plate
Case
Remote
Control Unit
(YEAJ012852)
(YEFX0217263)
(YEFA131839)
(YEFX9995584)
Q'ty: 1
Q'ty: 1
Q'ty: 1
Battery
(CR2025)
RCA Cord
(YEAJ071740)
Q'ty: 1
Q'ty: 1
Trim Plate
(YEFC05652)
Q'ty: 1
When driving please enjoy sound only.
CQ-D5501N
Mounting
Bolt
(YEFM285698)
Q'ty: 1
4
Lock Cancel
Plate
OSD
Deck Ass’y
(Upper Side)
When connecting this unit to the front monitor (on-dash/indash):
Warranty
Card
R
Caution: This product utilizes a laser.
VORSICHT - LASERSTRAHLUNG,
WENN
GEÖFFNET. VERMEIDEN
SIE EIN AUSSETZEN
GEGENÜBER
DEM
LASERSTRAHL.
VAR OIT U S – LASER SÄTEILYVAARA
AVAT T AESSA. VAR O
ALTISTUMISTA
SÄTEELLE.
TE
CAUTION - LASER RADIATION WHEN OPEN.
AVOID EXPOSURE TO
BEAM.
Note:
¡ The number in parentheses underneath each accessory part name is the part number for maintenance and service.
¡ Accessories and their parts numbers are subject to modification without prior notice due to improvements.
¡ Trim Plate and Mounting Collar are mounted on the main unit at shipment.
CQ-D5501N
5
System Upgrade
CQ-D5501N
❑ Optional system (Example)
DVD Player/Receiver with CD Changer Control
This unit can be combined with other components like
shown below. For more details, refer to the operating
instructions for the connected devices.
Preparation:
¡ The video signal setting of this unit (“TV Type” a Page
48) should be the same as the input signal setting
(NTSC/PAL) of the monitor to be connected. Otherwise,
pictures appear incorrectly. (Default: PAL)
■ DVD video, Video CD Playback
You can enjoy watching DVDs and VCDs if the optional
monitor (CY-VM1500EX) is connected. (DVD/VCD Player
a Page 30)
■ CD Changer
Option
(MP3 Player a Page 26)
*This unit is not compatible with WMA file.
You can connect the optional Panasonic CD changer unit
(CX-DP880N). For details, refer to the operating instructions for the CD changer unit.
Note:
¡This unit does not support a DVD changer due to shortage
of displayable digit number or other causes.
■ DVD-R, DVD-RW Playback
■ Digital Audio Output
■ MP3 Playback from CD-R/RW
(a Page 8, 53 for details)
■ Fully Motorized Face Plate
A touch is all it takes to slide the face plate down for access
to the disc slot. A three-stage tilt function permits viewing
angle to be adjusted to 15, 25 or 35 degrees for optimum
display visibility.
Digital audio output terminal for upgrading to Dolby Digital
and dts surround [Requires separately sold optical cable
(CA-LRD60) and digital surround processor (CYAC300EX).]
You have 6 preset modes (FLAT, ROCK, POP, VOCAL,
JAZZ, CLUB). You can customize your setting for these
(except FLAT) and save them for instant recall.
Contents
Just connecting a monitor display and CD Changer with
this unit.
Color LCD Display: CY-VM1500EX
STAND BY (R)
ON (G)
Safety Information .............................................. 2
Accessories ........................................................ 5
Features ............................................................. 6
Contents ............................................................. 6
System Upgrade ................................................ 7
Discs that can be Played Back ........................ 8
Preparation (Battery Replacement, Cancellation of
demonstration, TV Type setting, ACC Setting)...............9
General (Main Unit) ........................................... 10
General (Remote Control Unit) ........................ 14
VM1500
VM1500
DIGITAL
PRO LOGIC
PROCESSOR
DIGATAL
SURROUND
CE
SOUR
AC300
display
super
VOL
MUTE
SOURCE
bright
& 30w
Power
Amplifier
for Center
4
3
Speaker
DIMMER
SPACE
POSITION
multi-color
2
1
DR COMP
POSI
SPC
DIM
Digital Surround Processor:
CY-AC300EX
PWR
CD Changer:
CX-DP880N
External Power Amplifier
CD Changer: CX-DP880N
Note:
¡A CD changer and AUX cannot be connected at the same
time.
❑ 5.1-channel Surround System
This unit has an optical digital output. To connect the
optional digital surround processor (CY-AC300EX) with
this unit, you can build the 5.1-channels surround system in order to play DVD software in a way that creates
“You are here” feel in a car.
Centre Speaker:
EAB-CF2
Front Speakers:
CJ-DA1700N
Each source
Radio ................................................................. 16
Radio Data System (RDS) ................................ 18
Before Disc Playback ....................................... 24
CD Player .......................................................... 25
MP3 Player ........................................................ 26
Notes on MP3 ................................................... 28
DVD/VCD Player ............................................... 30
CQ-D5501N
Color LCD Display:
CY-VM1500EX
As needed
Audio Settings .................................................. 36
Function Settings (AF Mode, Region (REG) Mode, FM
Monaural Reception, Local Tuning, PTY Language Selection,
Spectrum Analyzer Display Patterns (PATTERN),
Mute/Attenuation, External Mute, Security Function, ACC
Selection) .............................................................. 40
User Settings (TV Type, etc.) ............................... 46
Language Code List ......................................... 50
Definition of Terms .......................................... 51
Anti-Theft System ............................................ 52
Fuse ................................................................... 53
Maintenance ..................................................... 53
Notes on Discs ................................................. 53
Installation ........................................................ 54
Wiring ................................................................ 56
Troubleshooting ............................................... 64
Specifications ................................................... 71
6
Color LCD Display:
CY-VM1500EX
COLOR LCD MONITOR
OSD (On-Screen Display) ................................ 33
CD Changer Control ......................................... 34
Common
E
N
G
L
I
S
H
CQ-D5501N
COLOR LCD MONITOR
■ SQ (Sound Quality)
SQ3 (3-Band Sound Quality)
Centre frequency and level are adjustable in each of 3
bands. This lets you fine-tune sound quality for each genre
to suit car-interior acoustics and your personal preferences. (a Page 36)
6
STAND BY (R)
ON (G)
❑ Basic System
Panasonic
STAND BY (R)
ON (G)
CQ-D5501N
COLOR LCD MONITOR
VM1500
DIGITAL
PRO LOGIC
PROCESSOR
DIGATAL
SURROUND
SOURCE
AC300
display
super
VOL
MUTE
SEL
5
Features
SEL
E
N
G
L
I
S
H
SOURCE
bright
& 30w
Power
Amplifier
for Center
4
2
Speaker
DIMMER
SPACE
POSITION
multi-color
DR COMP
DIM
SPC
POSI
3
1
PWR
Digital Surround
Processor:
CY-AC300EX
Power amplifier
Surround Speakers:
CJ-DA6920N
Subwoofer:
CJ-HD303N
CQ-D5501N
7
E
N
G
L
I
S
H
7
Discs that can be Played Back
❒ Disc Type
DISC
DVD
VCD
(Video CD)
CD
CD-R/RW
❒ Symbols used on jackets
(Examples of such symbols include)
2
¡
: Number of subtitle languages
Recordable
Mark/logo
TEXT
Disc Size
Video
Format
Audio
Format
Region No.
12 cm / 8 cm
NTSC / PAL
LPCM,
MPEG1, LPCM (CDMPEG2,
DA*),
Dolby
MPEG1
Digital
¡ 2
: Number of audio tracks
¡
: Number of angles
ReWritable
3
The numbers indicate the number of languages,
tracks, angles, etc., recorded on the disc.
Preparation
Remote Control Unit
Battery Replacement
q Remove the battery holder with
the remote control unit placed
on a flat surface.
q Stick your thumbnail into
the groove, and push the
holder in the direction of the
arrow at the same time.
w Pull it out in the direction of
the arrow using a tough
pointed object.
2, ALL
*CD-DA : A general music CD format.
Note:
¡About CD-Rs and CD-RWs, refer to “Notes on CDRs/RWs, DVD-Rs/RWs”. (a Page 53)
¡Some copy-protected music CDs are not playable.
¡Even if you play a dts DVD or a dts CD, analog sound cannot be reproduced. (Only digital output comes out)
❒ Notes on DVD-Rs/RWs
¡Only video formatted discs are playable. Discs in the
video recording (VR) format are unplayable.
¡Unfinalized discs are unplayable.
¡Some discs are unplayable depending on the disc itself,
device, drive and software that are used for disc recording.
❒ Discs not supported
The following discs are not played back on this product.
¡DVD-Audio
¡DVD-ROM
¡DVD-RAM
¡DVD+R
¡DVD+RW
¡SVCD
¡VSD
¡CVD
¡CD-G
¡CD-ROM (except MP3)
¡CD-RW (except MP3 and CD-DA)
¡CD-R (except MP3 and CD-DA)
¡SACD
¡Photo CD
¡CDV
¡Hybrid SACD (except CD-DA)
¡Divx Video Discs
¡CD-EXTRA (audio-only playback possible)
¡DVDs with a region number other than “2” or “ALL”
¡Playing back a photo CD disc with this unit could
damage the data that is recorded on the disc.
¡
4:3
: 4:3 standard size
¡
LB
: Letterbox (a Page 49, 51)
¡ 16:9 wide size
Tough pointed object
16:9 PS
Note:
¡The size of the image that is displayed on the screen
depends on the screen mode (“TV Display” a Page
48), and on the screen size for the content on the disc.
❒ Region Management Information
This product is designed and manufactured to
respond to the Region Management Information that
is recorded on a DVD disc. If the Region number
described on the DVD disc does not correspond to the
Region number of this product, this product does not
play the disc.
The Region number for this product is “2” or “ALL”.
Example:
2
1 2
4 6
¡Keep batteries away from children to avoid the risk of
accidents. If an infant ingests a battery, please seek
immediate medical attention.
Caution
w
q
Back side
w Put a battery in the case with
(+)-side facing up.
e Put the case back.
w
: Playback in letterbox format on a standard screen (4:3).
: Playback in PAN & SCAN (pan and scan)
(a Page 49, 51) format on a standard
screen (4:3).
16:9 LB
1
8
Warning
Screen size (H:V aspect ratio)
LPCM (CD-DA*),
MP3
E
N
G
L
I
S
H
¡ Remove and dispose of an old battery immediately.
¡ Do not disassemble, heat or short a battery. Do not
throw a battery into a fire or water.
¡ Follow local regulations when disposing of a battery.
¡Improper use of a battery may cause overheating, an
explosion or ignition, resulting in injury or a fire.
Note:
¡Battery Information:
Battery Type: Panasonic lithium battery (CR2025)
Battery Life: Approximately 6 months under normal use
(at room temperature)
e
First Time Power On
Cancellation of demonstration
The demonstration message appears for initial use.
q Set your car's ignition switch to the ACC or ON position.
w Press [SRC] (PWR).
The demonstration screen appears.
e Press [DISP].
The demonstration screen is cancelled, and no more
appears.
Note:
¡If you would like to turn on the power and make the
demonstration message appear, press and hold [SRC]
(PWR) for more than 4 seconds. (ACC ON)
ACC Setting
Caution
¡Be sure to select OFF when your car has no
ACC position in the ignition switch. Failure to
do this could cause the battery to go dead.
For an ACC-equipped car, select ON. (a Page 44) The
following functions are available. (Default: off)
¡The power is turned on automatically when inserting a
disc.
¡The clock can be displayed even if the power is off.
(a Page 13)
¡After the security function (a Page 44) is set to ON, the
function works when turning the ignition switch to OFF.
ALL
CQ-D5501N
: ACC not equipped
AF
PTY
TA
(Default)
MUTE/SQ
: ACC equipped
[SRC] (PWR: Power)
[DISP] (Display)
TV Type setting
Refer to “Optional system (Example)” (a Page 7) and “TV
Type” (a Page 48).
8
CQ-D5501N
CQ-D5501N
9
E
N
G
L
I
S
H
General (Main Unit)
[SRC: Source] (PWR: Power)
CD Player mode display (a Page 25)
Remote control sensor (a Page 14)
9
Spectrum analyzer (a Page 42)
(SQ3) indicator
Source
SQ (Sound Quality)
Press [SRC] to change the source.
You have 6 preset modes (FLAT, ROCK, POP, VOCAL,
JAZZ, CLUB). You can customize your setting for these
(except SQ-FLAT) and save them for instant recall.
SQ3 (3-Band Sound Quality)
Centre frequency and level are adjustable in each of 3
bands. This lets you fine-tune sound quality for each genre
to suit car-interior acoustics and your personal preferences. (a Page 36)
Press and hold [SQ] for more than 1 second to select the
sound type as follows:
Radio
CQ-D5501N
(a Page 16)
CD Player
AF
(a Page 25)
PTY
TA
MUTE/SQ
OR
MP3 Player
[VOLUME] Preset Buttons [1] to [6]
[MUTE] (Mute/attenuation)
[SQ] (Sound Quality)
Power
OR
DVD/VCD Player (VCD disc)
Volume
OR
DVD/VCD Player (DVD disc)
Press [SRC] (PWR).
Up
Down
OFF: Press and hold [SRC] (PWR) until you hear
a beep (approximately 1 second), then
release it.
Note:
¡ When the ignition switch is set to ON, the face plate is
tilted to secure their former positions.
¡ If the security function is set to ON, the security message is shown with a warning alarm. (Default: SLED
ON) (a Page 44 about Security Function setting)
(Default)
(FLAT) flat frequency response:
does not emphasize any part.
(When an VCD data disc is
in the player a Page 30)
Set your car's ignition switch to the ACC or ON position.
ON:
10
1
Preset number
(When an MP3 data disc is
in the player a Page 26)
[DISP] (Display)
E
N
G
L
I
S
H
Mute/Attenuation
ON : Press [MUTE].
OFF : Press [MUTE] again.
You can select mute or attenuation. (a Page 42)
indicator
(When an DVD data disc is
in the player a Page 30)
Default: 18
Setting range: 0 to 40
Note:
¡ The volume level can be set independently for each
source. (For radio, one volume setting for AM
(LW/MW), one volume setting for all FMs)
(ROCK) speedy and heavy sound:
exaggerates bass and treble.
(POP) wide-ranged and deep sound:
slightly emphasizes bass and treble.
CD Changer Control
OR
(When an optional CD
changer is connected a
Page 34)
AUX
(Sound source connecting to
the AUX input terminal)
Note:
¡AUX cannot be used when the CD changer is connected
to the DIN connector.
(VOCAL) clear sound:
emphasizes middle tone and slightly
emphasizes treble.
(JAZZ) jazz-specific deep sound:
sound with emphasis on sharpness of
high-hat and echo of saxophone.
(CLUB) club and disco-specific sound:
reproduction of realism being in a
club.
Press [DISP] to return to the regular mode.
Note:
¡ After pressing [SQ] for more than 1 second on the
main unit, you can also select a sound type by pressing
the preset buttons [1] to [6].
10
CQ-D5501N
CQ-D5501N
11
E
N
G
L
I
S
H
11
Clock Display (at Power off)
Clock Setting
E
N
G
L
I
S
H
When the power of the unit is set to OFF, press [DISP].
(ACC ON)
The 24-hour system is used for the clock.
12
General (Main Unit) (continued)
Caution
¡Do not pinch your finger or hand in the face plate.
[u: Eject]
(TILT/OPEN)
(Clock time) (Default)
CQ-D5501N
Note:
¡ Adjust the clock when “NO CT” appears on the screen.
Select the radio AM (LW/MW) mode. (a Page 16)
(Display off)
AF
Frequency
PTY
TA
When the power is set to ON, refer to the description for
each source mode.
MUTE/SQ
indicator
[DISP]
[]] [[]
(Hour/minute adjustment)
Press and hold [DISP] for more than 2 seconds.
Hour blinks
Open the Face Plate
Face Plate Angle (Tilt)
Press [u] (OPEN).
Press and hold [u] (TILT) until you hear a beep (approximately 1 second) from the speaker output, then release it.
Set the face plate to the position at which it is easy to read
what is on the display. Each time the above operation is
repeated, the face plate angle changes in the sequence
shown below.
Note:
¡The face plate automatically closes after a warning alarm
sounds if no operation is performed for approximately
20 seconds.
¡ When a disc is already loaded (
lights), the disc
will be ejected after the face plate fully opens.
(Disc Eject a Page 24)
Adjust the hour.
[[]: put forward hour.
[]]: put back hour.
Hour entered
Press [DISP].
Close the Face Plate
Minute blinks
Press [u] (OPEN).
Adjust the minute.
[[]: put forward minute.
[]]: put back minute.
Minute entered
TILT 1
TILT 2
TILT 3
OPEN
TILT OFF
Press [DISP].
Completed
Note:
¡ When a broadcast of FM Radio Data System is received,
the clock is adjusted automatically by the Clock Time
Service. (a Page 18)
Note:
¡The positions specified at “Face Plate Angle (Tilt)” are
memorized even after the following operations.
¡Open/close
¡ACC on/off
¡Power on/off
12
CQ-D5501N
CQ-D5501N
13
E
N
G
L
I
S
H
13
E
N
G
L
I
S
H
General (Remote Control Unit)
❑ General
❑ Discs (DVD/VCD/CD/MP3)
In this manual, the pictographs shown below are used to indicate compatible types of discs and operating units.
Discs
: DVD Video
DVD VCD
: CD
DVD VCD CD MP3
DVD VCD
DVD VCD CD MP3
[■] (STOP) DVD VCD CD MP3
¡Stops playback.
: VCD (Video CD)
[❚❚] (PAUSE) DVD VCD CD MP3
¡Pause.
: CD-R/RW’s containing MP3 files
[}] [{]
¡Selects (vertically)
or adjusts an
operation or item.
[❚❚] DVD VCD
¡Frame to Frame Play.
[B] (PLAY) DVD VCD CD MP3
¡Playback.
14
[s] [d] DVD VCD CD MP3
¡Goes to the beginning.
¡Chapter/track selection.
¡Fast forward/fast reverse.
DVD
CD] MP3
[sVCD
] [d
¡Goes to the beginning.
¡File selection.
[RET] (RETURN) DVD VCD CD MP3
¡Return to the previous display.
¡Input the number again.
¡Displays the video CD’s menu.
[MENU] (TITLE) DVD VCD
¡Displays the DVD menu. (Operations
vary according to the disc.)
¡Displays the Title menu. (Operations
vary according to the disc.)
[d] DVD VCD
¡Slow playback.
[]] [[]
¡Selects (horizontally)
or adjusts an operation or item.
[}]
[0] to [9]
¡Sets the language
code.
[OSD] (On-Screen Display)
¡Displays information about
each source on the screen.
PAUSE
PLAY
SRC
[]]
POWER
SOURCE
[[]
2
3
SEL
SUBTITLE AUDIO ANGLE
4
5
6
RANDOM
SCAN
REPEAT
7
8
9
OSD
[ENTER]
¡Determines an operation or item.
2
3
SEL
4
5
6
RANDOM
SCAN
REPEAT
7
8
9
OSD
[VOL]
¡Adjusts the sound
volume.
VOL
TRACK
GRP
0
MUTE
DRC TITLE / CHAPTER
[GRP] (Group) (TRACK) (TITLE/CHAPTER) DVD VCD CD MP3
¡Direct title/chapter selection.
¡Direct track selection.
¡Direct folder/file selection.
[0] to [9] DVD VCD
¡Selects an item on the menu.
[1] (SUBTITLE) DVD VCD
¡Switches the subtitle language.
DVD VCD CD MP3
[4] (RANDOM)
¡Random play.
[0] to [9] DVD VCD CD MP3
¡Direct title/chapter selection.
¡Direct track selection.
¡Direct folder/file selection.
[2] (AUDIO) DVD VCD
¡Switches the audio language.
VCD CD
[5] DVD
(SCAN)
¡Scan play.
DVD VCD
[2] (AUDIO)
¡Switches between stereo and
monaural sound.
[6] (REPEAT) DVD VCD CD MP3
¡Repeat play.
[3] (ANGLE) DVD VCD
¡Switches the angle.
CQ-D5501N
¡Selects a folder.
¡Folder up/down.
CAR AV
[MUTE]
¡Mutes the sound temporarily.
14
DVD
VCD[{]
CD MP3
[}]
SUBTITLE AUDIO ANGLE
TRACK
GRP
0
MUTE
DRC TITLE / CHAPTER
CAR AV
1
[ENTER] DVD VCD CD MP3
¡Determines an operation or item.
EN
[ENTER]
VOL
RET
TITLE
MENU
RETURN
R
[{]
TITLE
MENU
EN
1
[}] [{] []] [[] DVD VCD
¡Selects an operation or item.
PLAY
TRACK / SEARCH
R
RET
PAUSE
SRC
TRACK / SEARCH
RETURN
STOP
TE
[MENU]
¡Shows the menu
screen.
STOP
TE
[SRC]
¡Toggles power on/off.
¡Selects a source.
POWER
SOURCE
[0] (DRC) DVD VCD
¡Selects a range of dynamic range
compression.
CQ-D5501N
15
E
N
G
L
I
S
H
E
N
G
L
I
S
H
Radio
[SRC: Source]
[]] [[]
(TUNE)
(Stereo) indicator
15
16
1
CQ-D5501N
[BAND]
(APM: Auto Preset Memory)
AF
PTY
TA
MUTE/SQ
Preset Buttons [1] to [6]
(Preset station)
q Radio Mode
Press [SRC] to select the radio mode.
Band
Frequency
Preset number
w Band
Press [BAND].
[DISP] (Display)
Note:
¡ For tuning in to only stations whose receiving conditions are good in the seeking mode, set LOCAL to ON.
(a Page 40)
¡ For reducing noise when a receiving FM stereo wave is
weak, set FM MONO to ON. (a Page 40)
Display Change
Station Preset
Up to 6 stations can be stored in each of the FM1, FM2, FM3 and AM (LW/MW) band selections.
Note:
¡ New stations overwrite existing saved stations after these procedures.
Warning
¡To ensure safety, never attempt to preset stations while you are driving.
Press [DISP] to change the display as follows.
3AM (LW/MW)
Frequency
3FM (non RDS)
Frequency
Clock Time (CT)*
PS (Programme Service
Name)
Display Off
Auto Preset Memory (APM)
Manual Preset Memory
With this operation, stations with good receiving conditions can be automatically stored in the preset memory.
q Select a band. (a Previous page)
w Press and hold [BAND] (APM) for more than 2 seconds.
6 stations with first to 6th highest in signal strength will
be preset to each band.
Once set, the preset stations are sequentially scanned
for 5 seconds each. (scanning)
With this operation, a station can be manually stored in the
preset memory.
q Select a band and frequency. (a Previous page)
w Press and hold one of the preset buttons from [1] to [6]
until the display blinks once.
Preset number
Clock Time (CT)*
e Tuning
[[]: Higher frequency
[]]: Lower frequency
Press and hold [[] or []] for more than 0.5
seconds, then release it. Seeking will start.
Display Off
*Adjust the clock when “NO CT” appears on the screen.
(Clock setting a Page 13)
Note:
¡ To stop scanning, press one of the buttons from [1] to
[6].
¡ Only RDS stations will be saved at default setting (AF
ON). To select non-RDS stations, set AF to
OFF. (a Page 19)
Preset Station Calling
q Select a band. (a Previous page)
w Press one of the preset buttons from [1] to [6].
16
CQ-D5501N
CQ-D5501N
17
E
N
G
L
I
S
H
Radio Data System (RDS)
17
RDS Basics
E
N
G
L
I
S
H
Alternative Frequency (AF)
Some FM stations are broadcasting added data compatible with RDS. This unit offers convenient functions using such data.
RDS service availability varies with areas. Please understand if RDS service is not available in your area, the following service is not available, either. This chapter explains the summary and operation regarding RDS.
The following functions are available when receiving RDS stations.
Programme Service Name (PS)
Display
The name of the station is displayed.
When reception is poor, an RDS station broadcasting the
same programme is tuned in automatically.
Traffic Programme (TP)
Some RDS FM stations periodically provide a traffic
announcement.
Stations which broadcast the traffic announcement are
called Traffic Programme (TP).
Traffic Announcement (TA)
indicator
CQ-D5501N
Programme Identification (PI)
Each programme has its own number. This may be used to
search for another frequency on which the same programme is broadcast.
Region (REG)
Alternative Frequency (AF)
18
Each region has its own number. This may be used to
identify the region where the station you are now listening
to is located.
AF
PTY
TA
[DISP] (Display)
MUTE/SQ
[TA] (AF: Alternative Frequency)
Alternative Frequency (AF)
Mode
Press and hold [TA] (AF) for more than 2 seconds to
switch AF on and off.
AF ON : AF, Best Station Research and PI seek function
are active.
AF OFF : When the AF network of an RDS station is not
required.
Display Change
Press [DISP] to change the display as follows.
PS (Programme Service Name) (Default)
Frequency
Clock Time
Display Off
Radio announcements on traffic conditions.
Preset Memory (AF ON Setting)
Clock Time (CT) Service
When receiving an RDS station, the CT service automatically adjusts the time.
“NO CT” is displayed in areas where CT service is not available. (a Page 13 for Clock Setting)
Programme Type (PTY) Display
RDS FM stations provide a programme type identification
signal.
Example: news, rock, classical music, etc. (a Page 21)
18
CQ-D5501N
Preset Station Calling (Best Station Research)
AF self-tuning allows you to select a station with good
reception from the same network when the preset tuning is
activated.
For Poor Reception (PI Seek)
If reception becomes poor when tuning in a preset station,
press the same preset number button. The same station
with better reception will be searched for.
Press the same preset number button again to cancel.
Note:
¡ For PI Seek, cancel the TA mode first, then execute PI
Seek.
CQ-D5501N
19
E
N
G
L
I
S
H
E
N
G
L
I
S
H
Radio Data System (RDS) (continued)
Traffic Announcement (TA)
19
Some RDS FM stations periodically provide traffic information.
[VOLUME]
Programme Type (PTY) Reception
RDS FM stations provide a programme type identification signal. (Example: news, rock, classical music, etc.)
[]] [[]
(PTY selection)
indicator
indicator
CQ-D5501N
AF
20
CQ-D5501N
PTY
AF
TA
[BAND]
(Preset PTY search, PTY
selection)
PTY
TA
MUTE/SQ
MUTE/SQ
indicator
[TA] (TA mode/TP (TA) Search)
TA ON/OFF
(Default: OFF)
Press [TA] (TA mode) to switch the TA mode on and off.
The following functions are available when the TA mode is
active.
¡ A TP station is automatically searched for and received
at the instant of toggling the TA mode on if you are
receiving a non-TP station or a TP station with poor
reception.
¡ When executing seek tuning or APM, only TP stations
are selected. (a Page 17 for Auto Preset Memory)
¡ Setting to TA on with the unit in another mode, it will
automatically switch to radio mode and a traffic
announcement is broadcast on the radio when the traffic announcement begins. The traffic announcement
having finished, the unit will return to the previous
mode. (TA standby mode)
Preset Buttons [1] to [6] (PTY Preset)
[DISP] (PTY) (PTY Mode)
Traffic information only (TA mute)
Programme Type (PTY) Mode
PTY Preset
q Activate the TA mode.
w Set the TA volume. (a Page 38)
e Turn [VOLUME] to 0.
Once traffic information starts, the volume changes to the
TA volume.
Press and hold [DISP] (PTY) for more than 2 seconds to
switch the PTY display mode on and off.
The PTY function described below becomes enabled after
selecting to the PTY mode.
PTY Preset Call
PTY Selection
q Press [[] to change the programme type as shown
below. ([]]: opposite direction)
SPEECH
INFO
CULTURE
ROCK_M
OTHER_M
SOCIAL
LEISURE
OLDIES
/
/
/
/
/
/
/
/
MUSIC /
SPORT /
SCIENCE /
EASY_M /
WEATHER/
RELIGION /
JAZZ
/
FOLK_M /
NEWS
/
EDUCATE /
VARIED /
LIGHT_M /
FINANCE /
PHONE_IN /
COUNTRY /
DOCUMENT
AFFAIRS /
DRAMA /
POP_M /
CLASSICS /
CHILDREN /
TRAVEL /
NATION_M /
w Select a desired programme type and press [BAND].
Search will start to tune in to a station broadcasting the
selected programme type.
Programme types are stored in memory under preset buttons from [1] to [6] as shown in the table on the next
page.
To tune in a desired programme type, press any of preset
buttons from [1] to [6].
Preset PTY Search
q Select a programme type by pressing the preset button.
The preset programme type appears on the display for 5
seconds.
Example: Press preset button [1].
w Press the same preset button again (or press [BAND])
to tune in the desired programme type station.
Example: Press preset button [1] again.
Press [BAND] again to cancel.
Note:
¡ When there is no corresponding programme type station, “NONE” is displayed for 2 seconds.
PTY Preset Change
Press [BAND] again to cancel.
Note:
¡ When there is no corresponding programme type station, “NONE” is displayed for 2 seconds.
20
CQ-D5501N
q Select a programme type by using PTY Selection or
pressing PTY Preset buttons.
w Press and hold one of the buttons from [1] to [6] for
more than 2 seconds.
Example: Press and hold preset button [2] for more
than 2 seconds.
CQ-D5501N
21
E
N
G
L
I
S
H
E
N
G
L
I
S
H
Radio Data System (RDS) (continued)
Programme Type (PTY) Reception (continued)
21
Enhanced Other Network (EON)
PTY Preset (Default)
Preset No.
Programme Type
When PTY search is activated, these programme types are receivable.
indicator
1
NEWS
2
SPEECH
AFFAIRS, INFO, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED,
WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE_IN,
TRAVEL, LEISURE, DOCUMENT
3
SPORT
SPORT
4
POP_M
POP_M
5
CLASSICS
6
MUSIC
NEWS
FM1
22
Emergency Announcement
Reception
When an emergency announcement is broadcast, the unit
is automatically switched to receiving that broadcast (Even
when in the CD mode, MP3 mode, DVD/VCD mode or CD
Changer mode). During receiving the emergency
announcement, “ALARM” appears on the display.
CLASSICS
ROCK_M, EASY_M, LIGHT_M, OTHER_M, JAZZ, COUNTRY, NATION_M,
OLDIES, FOLK_M
Use the table below to note changes in preset stations.
Preset No.
Other RDS functions
FM2
FM3
1
2
3
When EON data is received, the EON indicator lights and
the TA and AF functions are expanded as follows.
TA: Traffic information from the current and other network
stations can be received.
AF: The frequency list of preset RDS stations is updated
by EON data.
EON enables the radio to make fuller use of RDS information. It constantly updates the AF list of preset stations,
including the one that is currently tuned in to. For example, if you preset a station far from home, you will later be
able to receive the same station at an alternative frequency,
or another station serving the same programme. EON also
keeps track of locally available TP stations for quick reception.
Note:
¡ Emergency announcements are broadcast at the TA volume level. (a Page 38)
4
5
6
Other PTY functions
PTY Language Selection: The language displayed on the screen is selectable. (English or Swedish) (a Page 42)
22
CQ-D5501N
CQ-D5501N
23
E
E
N
N
G
G
L
L
II
S
S
H
H
23
1
Before Disc Playback
CD Player
[SRC: Source]
Disc Insert
Caution
¡ Do not use irregularly shaped discs.
¡ Do not use discs that have a seal or label attached.
¡ To avoid damaging the face plate, do not push it down
or place objects on it while it is open.
¡ Do not pinch your finger or hand in the face plate.
¡ Do not insert foreign objects into the disc slot.
Note:
¡ Refer to “Discs that can be Played Back”. (a Page 8)
¡ Refer to the section on “Notes on MP3” (a Page 28)
and “Notes on Discs” (a Page 53).
¡ The power will be turned on automatically when a disc
is loaded.
¡ A disc which has both CD-DA data and MP3 data on it
may not be played back normally.
OSD (On-Screen Display)
(Only for remote control unit)
You can set up the optional monitor to display or hide the
following information: title/artist name for CDs,
album/title/artist name for MP3, playtime for VCDs and
title/chapter/playtime for DVDs.
E
N
G
L
I
S
H
[s] / [d] (a / f)
(Track selection/fast forward/fast reverse)
indicator
q Press [u] (OPEN).
When a disc is already loaded (
lights), the disc
will be ejected after the face plate fully opens.
CQ-D5501N
[BAND]
(y / 5: Pause/play)
[u: Eject]
(OPEN)
AF
PTY
TA
MUTE/SQ
w Insert a disc.
[3] (SCROLL) [5] (SCAN)
[4] (RANDOM) [6] (REPEAT)
Printed Side
Note:
¡ It may take some time to start playing.
¡ Playback will start automatically after recognizing the
data of the loaded disc.
When CD is in the player
Pause (y / 5)
Press [SRC] to select the CD player mode and playback
starts.
Track
Play time
Press [BAND] (y / 5).
Display Change
Disc title
OR
(a Page 26 about MP3 Player)
Track title
(a Page 30 about DVD/VCD Player)
Disc Eject
q Press [u] (OPEN).
The disc will be ejected after the face plate fully opens.
w Take the disc out.
e Press [u] (OPEN) to close the face plate.
Note:
¡ The face plate is automatically closed after a warning
alarm sounds if no operation is performed for approximately 20 seconds.
CQ-D5501N
All the available tracks are played in a random sequence.
Press [4] (RANDOM).
lights.
Press [4] (RANDOM) again to cancel.
Scan Play
The first 10 seconds of each track is played in sequence.
Press [5] (SCAN).
Press [5] (SCAN) again to cancel.
Display off
OR
Random Play
Clock time
OR
(a Page 30 about DVD/VCD Player)
[DISP] (Display)
Press [BAND] (y / 5) again to cancel.
Press [DISP].
Track/Play time
Press [OSD] to switch the OSD text displays. (a Page 33)
24
24
1
Note:
¡ “NO TEXT” is displayed when there is no information on
the disc.
¡ To have another circle scroll while a title is displayed,
press [3] (SCROLL).
Track Selection
[d]: Next track
[s]: Beginning of the current track
For the previous track, press twice.
Fast Forward/Fast Reverse
Press and hold for more than 0.5 seconds.
Each time you press the button, the speed changes as follows.
Regular speed /2 times /5 times /10 times /20 times
[d] (f): Fast forward
[s] (a): Fast reverse
Press [BAND] (y / 5) to cancel.
Repeat Play
The current track is repeated.
Press [6] (REPEAT).
lights.
Press [6] (REPEAT) again to cancel.
Direct Track Selection
(Only for remote control unit)
Example: Track number 10
q Press [GRP].
w Press [1] [0]. (Press [RET] to cancel.)
e Press [ENTER].
Note:
¡ To suspend direct selection, press [DISP].
¡ Random, Scan and Repeat plays are canceled once
[ENTER] is pressed.
CQ-D5501N
25
E
N
G
L
I
S
H
MP3 Player
25
[SRC: Source]
E
N
G
L
I
S
H
This unit is not compatible with WMA file.
[s] / [d]
(File selection)
[{] / [}] (FOLDER)
(Folder selection)
[BAND] (y / 5: Pause/play)
indicator
CQ-D5501N
AF
26
1
PTY
TA
MUTE/SQ
[3] (SCROLL)
[4] (RANDOM)
When a disc is in the player
Press [SRC] to select the MP3 player mode and playback
starts.
Folder
[DISP] (Display)
[6] (REPEAT)
Note:
¡ “NO TEXT” is displayed when there is no information on
the disc.
¡ To have another circle scroll while a title is displayed,
press [3] (SCROLL).
Folder Selection
File
Display Change
[}]: Next folder
[{]: Previous folder
Press [DISP].
Folder/File
File Selection
[d]: Next file
[s]: Beginning of the current file
For the previous file, press twice.
Play time
Folder name
(
) (Data reading)
Pause (y / 5)
Press [BAND] (y / 5).
Random Play
Direct Selection
All the available files are played in a random sequence.
(Only for remote control)
Press [4] (RANDOM).
lights.
Press [4] (RANDOM) again to cancel.
Folder Random Play
All the files in the current folder are played in a random
sequence.
Press [BAND] (y / 5) again to cancel.
) (Data reading)
(
Album name
(
) (Data reading)
Title and Artist name
(
) (Data reading)
Example: Folder number 10 (a Page 29)
q Press [GRP] twice.
w Press [1] [0]. (Press [RET] to cancel.)
e Press [ENTER].
Direct File Selection
Example: File number 10
Press and hold [4] (RANDOM) for more than 2 seconds.
light.
Press and hold [4] (RANDOM) again for more than 2
seconds to cancel.
Repeat Play
The current file is repeated.
File name
Direct Folder Selection
Press [6] (REPEAT).
lights.
Press [6] (REPEAT) again to cancel.
q Press [GRP].
w Press [1] [0]. (Press [RET] to cancel.)
e Press [ENTER].
Note:
¡To suspend direct selection, press [DISP].
¡ Random, Folder Random, Repeat and Folder Repeat
plays are canceled once [ENTER] is pressed.
Folder Repeat Play
The current folder is repeated.
Press and hold [6] (REPEAT) for more than 2 seconds.
light.
Press and hold [6] (REPEAT) again for more than 2 seconds to cancel.
Clock time
Display off
26
CQ-D5501N
CQ-D5501N
27
E
N
G
L
I
S
H
Notes on MP3
27
MP3 (MPEG Audio Layer-3) is the compression format of digital
audio. It is developed by MPEG (Motion Picture Experts Group).
Using this compression format, you can record the contents of
about 10 music CDs on a single CD (This figure refers to data
recorded on a 650 MB CD-R or CD-RW at a fixed bit rate of 128
kbps and a sampling frequency of 44.1 kHz).
What is MP3?
Note:
¡ MP3 encoding and CD writing software programs are not
supplied with this unit.
Points to remember when making MP3 files
¡ High bit rate and high sampling frequency are recommended
for high quality sound.
¡ Selecting VBR (Variable Bit Rate) is not recommended
because playing time is not displayed properly and sound
may be skipped.
¡ The playback sound quality differs depending on the encoding
circumstances. For details, refer to the instructions of your
own encoding software and writing software.
¡ It is recommended to set the bit rate to “128 kbps or more”
and “fixed”.
Caution
¡ Never assign the “.mp3” file name extension to a file that is not in the MP3 format.
This may not only produce noise from the
speaker damage, but also damage your
hearing.
Display Information
Recording Recording
MP3 filesMP3/WMA
on a CD-media
files on a CD-media
Displayed items
¡ CD-TEXT
Disc title
Track title
E
N
G
L
I
S
H
¡ MP3 (ID3 tag)
Album name
Title and Artist name
¡ MP3
Folder name
File name
Displayable characters
¡ Displayable length of file name/folder name: within 64 characters.
¡ Name files and folders in accordance with the standard of
each file system. Refer to the instructions of writing software
for details.
¡ ASCII character set can be displayed.
¡ You are recommended to minimize the chances of making a
disc that contains both CD-DA files and MP3 files.
¡ If CD-DA files are on the same disc as MP3 files, the songs
may not play in the intended order, or some songs may not
play at all.
¡ Do not record files other than MP3 files and unnecessary folder on a disc.
¡ The name of an MP3 file should be added by rules as shown
in the following descriptions and also comply with the rules of
each file system.
¡ The file extension “.mp3” should be assigned to each file
depending on the file format.
¡ You may encounter trouble in playing MP3 files or displaying
the information of MP3 files recorded with certain writing
software or CD recorders.
¡ This unit does not have a play list function.
¡ Although Multi-session recording is supported, the use of
Disc-at-Once is recommended.
¡ Packet writing software is not supported.
28
1
Supported file systems
ISO 9660 Level 1/Level 2, Apple Extension to ISO 9660, Joliet,
Romeo
Note:
¡ Apple HFS, UDF 1.50, Mix CD and CD Extra are not supported.
Compression formats (Recommendation: “Points to remember when making MP3 files” on the previous page)
ASCII character set
A to Z, a to z, digits 0 to 9, and the following symbols:
(space) ! ” # $ % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | }
~
Note:
¡ With some software in which MP3 format files have been
encoded, the character information may not be displayed
properly.
¡ Undisplayable characters and symbols will be converted into
an asterisk ( ).
¡It is recommended that the length of the file name is less than
8 (excluding the file extension).
Compression method
Bit rate
VBR
Sampling frequency
MPEG 1 audio layer 3 (MP3)
32 k – 320 kbps
Yes
32, 44.1, 48 kHz
MPEG 2 audio layer 3 (MP3)
8 k – 160 kbps
Yes
16, 22.05, 24 kHz
Folder selection order/file playback order
Maximum number of files/folders
¡ Maximum number of files: 999
¡ Maximum number of files in one folder: 255
¡ Maximum depth of trees: 8
¡ Maximum number of folders: 255 (Root folder is included.)
Root Folder
(Root Directory)
1
2
q
Folder Selection
4
e
In the order
1
–
8
3
Note:
¡ This unit counts the number of folders irrespective of the presence or
absence of an MP3 file.
¡ If the selected folder does not contain any MP3 files, the nearest MP3
files in the order of playback will be played.
¡ Playback order may be different from other MP3 players even if the
same disc is used.
¡ “ROOT” appears when displaying the root folder name.
w
File Selection
In the order
–
y
q
5
6
r
8
7
Tree 1
Tree 2
Tree 3
t
y
Tree 4
Tree 8
(Max.)
Copyright
It is prohibited by copyright laws to copy, distribute and
deliver copyrighted materials such as music without the
approval of copyright holder except enjoying yourself
personally.
No warranty
Above description complies with our investigations as of
December 2004. It has no warranty for reproducibility
and displayability of MP3.
28
CQ-D5501N
CQ-D5501N
29
DVD/VCD Player
You can enjoy watching DVDs and VCDs if the optional monitor (CY-VM1500EX) is connected.
[SRC: Source]
[s] / [d] (a / f)
(Chapter selection/fast
forward/fast reverse/
slow play)
CQ-D5501N
AF
[BAND]
(y / 5: Pause/play)
PTY
TA
MUTE/SQ
[DISP] (Display)
[6] (REPEAT)
When a disc is in the player
Chapter Selection
Press [SRC] to select the DVD/VCD player mode and playback starts. (If automatic start is not performed, press [5]
(PLAY) of the remote control, or try to operate it manually
according to the menu screen of the disc.)
[d]: Next chapter
[s]: Beginning of the current chapter
For the previous chapter, press twice.
(When DVD disc is in the player)
Title
Chapter
(When VCD disc is in the player)
Fast Forward/Fast Reverse
Press and hold for more than 0.5 seconds.
Each time you press the button, the speed changes as follows.
Regular speed /2 times /5 times /10 times /20 times
[d] (f): Fast forward
[s] (a): Fast reverse
Press [BAND] (y / 5) to cancel.
Pause (y / 5)
Stop
Subtitle
DVD VCD
Press [3] (STOP).
Press [5] (PLAY) to resume playback from the point where
[3] (STOP) is pressed. (Continued playback function)
To cancel continued playback, press [3] (STOP) again in
the stop mode.
Frame to Frame Play
Direct Selection (during playback)
DVD VCD
Example: Chapter number 10
q Press [GRP].
w Press [1][0]. (Press [RET] to cancel.)
e Press [ENTER].
Direct Title Selection
You can select a subtitle language if the loaded disc has
multi-language subtitles.
When [1] (SUBTITLE) is kept pressed for more than 1
second, the subtitle language is changed over at the intervals of 1 second.
DVD VCD
Press [y] (PAUSE) to go to next frame in the pause.
To resume normal playback, press [5] (PLAY).
Direct Chapter Selection
DVD VCD
DVD VCD
Example: Title number 10
Audio
DVD VCD
You can select an audio channel if the disc holding multiaudio channels is loaded.
When [2] (AUDIO) is kept pressed for more than 1 second, the audio channel is changed over at the intervals of 1
second.
DVD VCD
Audio
You can select audio output among “STEREO”, “MONO L”
and “MONO R”.
When [2] (AUDIO) is kept pressed for more than 1 second, the audio output is changed over at the intervals of 1
second.
STEREO
MONO L
MONO R
Press [BAND] (y / 5).
Display Change
Press [BAND] (y / 5) again to cancel.
q Press [GRP] twice.
w Press [1][0]. (Press [RET] to cancel.)
e Press [ENTER].
Slow play
DVD
List Selection
(Only for PBC-applicable discs a Page 51)
Example: List number 10
q Press [1][0]. (Press [RET] to cancel.)
w Press [ENTER].
Press [DISP].
3DVD disc
Title/Chapter
30
Functions Only by Remote Control Unit
3VCD disc
VCD
Clock time
Clock time
Press and hold [d] for more than 0.5 seconds during
pausing.
Press [BAND] (y / 5) again to cancel.
Display off
Display off
Repeat Play
The current chapter is repeated.
Press and hold [6] (REPEAT) for more than 2 seconds.
light.
Press and hold [6] (REPEAT) again for more than 2 seconds to cancel.
Angle
DVD VCD
You can select an angle if a multi-angle disc is loaded.
VCD
Note:
¡ If a non-existent title/chapter/track/number is input and
entered, the command is invalid and the display returns to
regular mode.
¡ Direct title selections can be made by pressing [GRP] once
in the stop mode. DVD VCD
¡ To return to the regular mode, press [DISP].
When [3] (ANGLE) is kept pressed for more than 1 second, the angle is changed over at the intervals of 1 second.
[y] (PAUSE)
[3] (STOP)
POWER
SOURCE
STOP
PAUSE
PLAY
3
SEL
SRC
TRACK / SEARCH
RET
TITLE
MENU
1
2
RETURN
[RET]
[5] (PLAY)
[ENTER]
R
29
E
N
G
L
I
S
H
TE
E
N
G
L
I
S
H
EN
SUBTITLE AUDIO ANGLE
[0] – [9]
4
5
6
RANDOM
SCAN
REPEAT
7
8
9
OSD
VOL
TRACK
GRP
0
MUTE
DRC TITLE / CHAPTER
[GRP]
CAR AV
30
CQ-D5501N
CQ-D5501N
31
E
N
G
L
I
S
H
DVD/VCD Player (continued)
E
N
G
L
I
S
H
OSD (On-Screen Display)
You can see OSDs (On-Screen Display) if the optional monitor (CY-VM1500EX) is connected.
31
Functions Only by Remote Control Unit (continued)
Disc Menu
D.Range Compression
DVD VCD
You can stop playing the disc temporarily and call up the
on-disc menu screen.
Press [MENU] (TITLE) during playback.
Title Menu
DVD VCD
You can stop playing the disc temporarily and call up the
on-disc title menu screen.
Press and hold [MENU] (TITLE) during playback for
more than 2 seconds.
DVD VCD
You can select a range of dynamic range compression.
This function is effective for playback of Dolby
Digital/Dolby Surround DVD video. The words of an actor
hardly audible during playback at a low volume, for example, will become easier to listen to by selecting “MINIMUM”.
q Press and hold [0] (DRC) during playback for more
than 2 seconds to activate the DRC selection mode.
w Press and hold [0] (DRC) for more than 2 seconds to
select a range of DRC.
OSD (On-Screen Display)
Each time you press [OSD], the display changes according to the disc type.
3CD (Music CD)
Track play time
Play
Title
MINIMUM
STANDARD
Mode recommended by software
creators for listening at low
volumes.
Does not compress the dynamic
range. (Default)
Conversation level
MINIMUM
STANDARD
OFF
Track 12 : FAVORITE
PLAY
TITLE
MENU
[MENU]
1
2
TE
RET
RETURN
R
TRACK / SEARCH
EN
3
SEL
SUBTITLE AUDIO ANGLE
4
5
6
RANDOM
SCAN
REPEAT
7
8
9
OSD
[0] (DRC)
VOL
Play
: BEST OF MUSIC
CD
Artist
: GREAT SINGER
3MP3
ID3 TAG ON
Play
Artist
PLAYER
MODE
: GREAT SINGER
Track: 12/22 Time: 01:00:13
Track: 12/22 Time: 00:00:13
MP3 player mode
Play
Folder
:MP3 MUSIC
File
:WINTER.mp3
ID3Tag
Album :BEST OF MUSIC
Title
:FAVORITE
Artist
:GREAT SINGER
MP3 PLAYER MODE
Folder : 001/009 File : 001/100 Time: 00:00:13
Chapter play time
Total play time
Play
Caution
PAUSE
Title
Track 12 : FAVORITE
3DVD (DVD Video)
Text off
STOP
CD player mode
Play
: BEST OF MUSIC
Folder : 001/009 File : 001/100 Time: 00:00:13
SRC
Total play time
Track: 12/22 Time: 00:03:13
Most compressed mode: TV
broadcasts, etc
OFF
POWER
SOURCE
32
(Only for remote control unit)
You can set up the optional monitor to display or hide the following information: title/artist name for CDs, album/title/artist
name for MP3, playtime for VCDs and title/chapter/playtime for DVDs.
¡ The sound of DVD video covers a wide dynamic range
of more than 100 dB. Thus, the reproduced sound
volume of some DVD discs may be significantly low.
When you increase the volume in this case, the sound
may reach the peak level suddenly and it may lead to
a traffic accident. To avoid such an accident, you can
use this function.
Title:02/03
3VCD (Video CD)
Text off
Play
Chapter:025/050 Time: 00:05:59
Title:02/03
Chapter:025/050 Time: 02:35:40
SUBTITLE AUDIO ANGLE
Play time
Play
TRACK
GRP
0
MUTE
DRC TITLE / CHAPTER
4
5
6
RANDOM
SCAN
REPEAT
7
8
9
OSD
VOL
TRACK
GRP
MUTE
DRC TITLE / CHAPTER
0
CAR AV
CAR AV
Time: 00:00:13
[OSD]
32
CQ-D5501N
CQ-D5501N
33
E
N
G
L
I
S
H
E
N
G
L
I
S
H
CD Changer Control
[SRC: Source]
indicator
indicator
33
CQ-D5501N
AF
[s] / [d] (a / f)
(Track selection/fast forward/fast
reverse)
[{] / [}] (DISC)
(Disc selection)
PTY
TA
Note:
¡Trouble may occur while playing CD-Rs. Refer to the section on “Notes on Discs”. (a Page 53)
¡This unit does not support the following through the CD changer.
¡CD-RW playback. (except when CX-DP880N is connected)
¡MP3/WMA playback.
¡CD text display (except when CX-DP9061EN is connected)
¡Pausing does not function in the CD changer mode.
¡This unit does not support a DVD changer due to shortage of displayable digit number or other causes.
34
1
MUTE/SQ
[3] (SCROLL) [5] (SCAN)
[4] (RANDOM)
[6] (REPEAT)
¡CD changer functions are designed for optional
Panasonic CD changer unit (CX-DP880N).
Preparation:
¡Connect the CD changer, and load a magazine (CDs).
[DISP] (Display)
CD Changer Mode
Note:
¡ “NO TEXT” is displayed when there is no information on
the disc or connected CD changer is not compatible
with CD-TEXT.
¡ To have another circle scroll while a title is displayed,
press [3] (SCROLL).
Press [SRC] to select the CD changer mode and playback
starts.
Disc Selection
[}]: Next disc
[{]: Previous disc
Track
Play time
Disc
Note:
¡ Load a magazine with CDs when “NO DISC” is displayed.
¡ The power will be turned on automatically when a
magazine is loaded.
Display Change
Press [DISP].
Track Selection
[d]: Next track
[s]: Beginning of the current track
For the previous track, press twice.
Fast Forward/Fast Reverse
Press and hold
[d] (f): Fast forward
[s] (a): Fast reverse
Release them to resume the playback.
Random Play
Repeat Play
All the available tracks are played in a random sequence.
The current track is repeated.
Press [4] (RANDOM).
lights.
Press [4] (RANDOM) again to cancel.
Press [6] (REPEAT).
lights.
Press [6] (REPEAT) again to cancel.
Disc Random Play
Disc Repeat Play
All the available tracks on the current disc are played in a
random sequence.
The current disc is repeated.
Press and hold [4] (RANDOM) for more than 2 seconds.
blinks.
Press and hold [4] (RANDOM) again for more than 2
seconds to cancel.
Scan Play
Direct Disc Selection
The first 10 seconds of each track is played in sequence.
(Only for remote control)
Example: Disc number 5
q Press [GRP].
w Press [5].
e Press [ENTER].
Press [5] (SCAN).
Disc title
Track title
Press and hold [6] (REPEAT) for more than 2 seconds.
blinks.
Press and hold [6] (REPEAT) again for more than 2 seconds to cancel.
Press [5] (SCAN) again to cancel.
Disc Scan Play
Clock time
From the next disc, the first 10 seconds of the first track of
all the discs is played in sequence.
Display off
Note:
¡ To suspend direct selection, press [DISP].
¡ Random, Disc Random, Scan, Disc Scan, Repeat and
Disc Repeat plays are canceled once [GRP] is pressed.
Press and hold [5] (SCAN) for more than 2 seconds.
Press and hold [5] (SCAN) again for more than 2 seconds to cancel.
34
CQ-D5501N
CQ-D5501N
35
E
N
G
L
I
S
H
E
N
G
L
I
S
H
Audio Settings
Regular mode
Turn [VOLUME]. (Press [VOL }] or
[VOL {] on the remote control unit.)
VOLUME
BASS
TA VOL
35
SUBW LPF
Press [VOLUME]
(PUSH SEL: select).
(Press [SEL] on the
remote control unit.)
CQ-D5501N
AF
PTY
TA
MUTE/SQ
[SQ] (Sound Quality)
Preset Buttons [2] to [6]
[DISP] (Return to the regular mode)
[[] / []]
[{] / [}]
[BAND]
TREBLE
SQ SET
SUBW LEV
FADER
36
1
BALANCE
Note:
¡ To return to the regular mode, press [DISP].
¡ If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume adjustment, 10 seconds in the SQ adjustment), the display returns to the regular mode.
¡ The volume can also be adjusted directly using [VOLUME] on the main unit. (a Page 10)
¡ Please refer to page 11 for calling up a preset SQ.
Turn [VOLUME].
Volume
Default: 18
Setting range: 0 to 40
Bass/Treble
You can adjust the bass and treble sounds.
Default: BAS (bass) 0 dB
TRE (treble) 0 dB
Setting range: –12 dB to +12 dB (by 2 dB)
Press [VOLUME] (PUSH SEL)
to open the menu.
q : Up
w : Down
Turn [VOLUME].
Press [VOLUME] (PUSH SEL).
q : Up
w : Down
Turn [VOLUME].
Press [VOLUME] (PUSH SEL).
q : Up
w : Down
q Press [[] or []] to select a frequency
SQ Adjustment
You can adjust the characteristics of the currently selected
sound type (SQ).
It is also possible to preset up to 5 different adjusted SQs.
Tone/SQ adjustable range: –12 dB to +12 dB (by 2 dB)
SQ Low/Bass : ± 12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)
SQ Mid
: ± 12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)
SQ High/Treble : ± 12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)
¡ The bass/treble control frequency is fixed to the frequency
that has been selected for SQ.
Press [VOLUME] (PUSH SEL).
FTo return an adjusted SQ to the default setting
q Press and hold [SQ] for more than 1 second, and select
the SQ which is to be returned to the default setting. (Only
for main unit)
w Press and hold [BAND] for more than 2 seconds.
36
Note:
¡ You cannot save
any SQ presetting
value in [1] button.
¡ Any SQ adjustments will not
change the call up
screen names such
as ROCK and JAZZ.
band (Low, Mid, High).
[[]: Higher frequency band
[]]: Lower frequency band
Turn [VOLUME] to select a frequency.
q: Higher frequency
w: Lower frequency
[}] or [{] to adjust the level.
Press
w
Frequency
The selected frequency band
blinks.
[}]: Up
[{]: Down
e Press and hold one of the preset buttons
from [2] to [6] for more than 2 seconds.
¡The adjusted SQ is preset in the number of the selected button, and return
to the regular mode resumes.
Level
¡When you suspend the SQ preset adjustment, each level remains your recent
adjustment until a new SQ presetting operation is performed or you call up
the SQ preset.
(Page 38)
CQ-D5501N
CQ-D5501N
37
E
N
G
L
I
S
H
E
N
G
L
I
S
H
Audio Settings (continued)
Regular mode
Turn [VOLUME]. (Press [VOL }] or
[VOL {] on the remote control unit.)
VOLUME
BASS
TA VOL
37
SUBW LPF
Press [VOLUME]
(PUSH SEL: select).
(Press [SEL] on the
remote control unit.)
CQ-D5501N
AF
PTY
TREBLE
SQ SET
SUBW LEV
FADER
38
BALANCE
Note:
¡ To return to the regular mode, press [DISP].
¡ If no operation takes place for more than 5 seconds in audio setting, the display returns to the regular mode.
¡ Adjustments of the subwoofer level and low pass filter are effective when the subwoofer is connected.
TA
MUTE/SQ
[DISP] (Return to the regular mode)
Balance/Fader
You can adjust the sound level among the right, left, front and
rear speakers.
Default: BAL (balance) CNT (centre)
FAD (fader) CNT (centre)
Setting range: 15 levels each and CNT (centre)
Turn [VOLUME].
Press [VOLUME] (PUSH SEL).
Turn [VOLUME].
Press [VOLUME] (PUSH SEL).
Subwoofer Level
You can change the subwoofer volume level.
Default: 0
Setting range: MUTE (–∞), – 6 dB to + 6 dB (by 2 dB)
Press [VOLUME] (PUSH SEL).
38
CQ-D5501N
q : Up
w : Down
Turn [VOLUME].
Press [VOLUME] (PUSH SEL).
q : 120 Hz
w : 80 Hz
Turn [VOLUME].
TA Volume Set
Traffic announcement are broadcast at the TA volume level.
Default: 18
Setting range: 1 to 40
q : Front enhanced
w : Rear enhanced
Turn [VOLUME].
Subwoofer LPF (Low Pass Filter)
You can select the upper limit frequency of the sound from subwoofer.
Default: 80 Hz
Setting range: 80 Hz, 120 Hz
q : Right enhanced
w : Left enhanced
Press [VOLUME] (PUSH SEL).
q : Up
w : Down
w
q
CQ-D5501N
39
E
N
G
L
I
S
H
Function Settings
Turn [VOLUME]. (Press [}] or [{] on
the remote control unit.)
Regular mode
39
AF SEL
(FM Mode)
REGION
(FM Mode)
FM MONO
(FM Mode)
ACC SET
Press and hold
[VOLUME] (PUSH
SEL: select) for more
than 2 seconds.
CQ-D5501N
AF
PTY
FM LOCAL
(FM Mode)
AM LOCAL
(AM Mode)
PTY LANG
(RDS Mode)
E
N
G
L
I
S
H
40
1
SECURITY
EXT MUTE
MUTE KEY
PATTERN
Note:
¡ To return to the regular mode, press [DISP].
¡ If no operation takes place for more than 10 seconds in function setting, the display returns to the regular mode.
TA
MUTE/SQ
[DISP] (Return to the regular mode)
Turn [VOLUME].
AF Mode (FM mode)
You can select AF1 or AF2.
Default: AF1
Press and hold [VOLUME]
(PUSH SEL) for more than 2
seconds to open the menu.
: High level AF operating sensitivity.
w
: Low level AF operating sensitivity. (Default)
Turn [VOLUME].
Region (REG) Mode (FM mode)
Changes the selection range of AF, Best Station Research and PI
seek.
Default: OFF
Note:
¡ When REG mode is switched from OFF to ON or vice versa,
AF mode turns on automatically.
q
q
: The frequency is changed only for programmes within the
region.
w
: The frequency is changed also for programmes outside the
region. (Default)
Press [VOLUME] (PUSH SEL).
Turn [VOLUME].
FM Monaural Reception
(FM mode)
q
: MONO ON
w
: MONO OFF (Default)
Press [VOLUME] (PUSH SEL).
Noise is significantly decreased when weak signals are received
from an FM broadcast station.
Default: OFF
indicator
Turn [VOLUME].
Local Tuning (Radio mode)
Press [VOLUME] (PUSH SEL).
Only stations with good reception are detected in seek tuning.
Default: OFF
q
: LOCAL ON
w
: LOCAL OFF (Default)
indicator
(Page 42)
40
CQ-D5501N
CQ-D5501N
41
E
N
G
L
I
S
H
Function Settings (continued)
Turn [VOLUME]. (Press [}] or [{] on
the remote control unit.)
AF SEL
(FM Mode)
Regular mode
41
REGION
(FM Mode)
FM MONO
(FM Mode)
ACC SET
Press [VOLUME]
(PUSH SEL: select).
CQ-D5501N
AF
PTY
FM LOCAL
(FM Mode)
AM LOCAL
(AM Mode)
PTY LANG
(RDS Mode)
E
N
G
L
I
S
H
42
SECURITY
EXT MUTE
MUTE KEY
PATTERN
Note:
¡ To return to the regular mode, press [DISP].
¡ If no operation takes place for more than 10 seconds in function setting, the display returns to the regular mode.
TA
MUTE/SQ
[DISP] (Return to the regular mode)
Turn [VOLUME].
PTY Language Selection (RDS
mode)
Press [VOLUME] (PUSH SEL).
Default: ENGLISH
q
: English (Default)
w
: Swedish
Turn [VOLUME].
Spectrum Analyzer Display Patterns
(PATTERN)
: Off
Press [VOLUME] (PUSH SEL).
: Pattern 1 (Default)
Default: Pattern 1
Variety: 6 types, OFF
w
q
: Pattern 6
Turn [VOLUME].
Mute/Attenuation
Press [VOLUME] (PUSH SEL).
You can select mute or attenuation. (a Page 10)
Default: MUTE
q
: 10 steps decrease (Attenuation)
w
: No sound (Mute) (Default)
Turn [VOLUME].
: No sound (Default)
External Mute
Allows you to mute the current source while Panasonic navigation system provides voice guidance or car telephone conversation is in progress.
Default: 0
Setting range: 0 to 2, OFF
Press [VOLUME] (PUSH SEL).
: 15 steps decrease
w
When External Mute is activated.
(Example: MUTE LV 0)
q
: 10 steps decrease
: Unchanged
42
CQ-D5501N
(Page 44)
CQ-D5501N
43
E
N
G
L
I
S
H
Function Settings (continued)
Turn [VOLUME]. (Press [}] or [{] on
the remote control unit.)
Regular mode
43
AF SEL
(FM Mode)
REGION
(FM Mode)
FM MONO
(FM Mode)
ACC SET
Press [VOLUME]
(PUSH SEL: select).
CQ-D5501N
AF
PTY
FM LOCAL
(FM Mode)
AM LOCAL
(AM Mode)
PTY LANG
(RDS Mode)
E
N
G
L
I
S
H
44
SECURITY
EXT MUTE
MUTE KEY
PATTERN
Note:
¡ To return to the regular mode, press [DISP].
¡ If no operation takes place for more than 10 seconds in function setting, the display returns to the regular mode.
TA
MUTE/SQ
[DISP] (Return to the regular mode)
Turn [VOLUME].
Security Function
q
The security function is activated. (Default)
w
The security function is not activated.
Press [VOLUME] (PUSH SEL).
You can activate the anti-theft function when leaving your car.
Default: ON
SLED (Security Light Emitted Diode) ON
When the ignition switch is turned OFF...
¡ The security message will be displayed.
¡ The face plate removal alarm will be active.
(a Page 52)
When the face plate is removed...
¡ The security indicator (SLED) blinks. (a Page 52)
Turn [VOLUME].
q
ACC Selection
Set to ON if your car
has ACC position.
Default: OFF
Press [VOLUME] (PUSH SEL).
Caution
w
¡ Be sure to select OFF when your car has no ACC position in
the ignition switch. Failure to do this could cause the battery
to go dead.
44
ACC ON
¡The power is turned on when a disc is inserted while the
power is off.
¡The Clock Time can be displayed while power is off.
¡When the ignition switch is turned to OFF, the security message is shown and the face plate removal alarm sounds (at
Security Function ON setting).
CQ-D5501N
Set to OFF if your car
has no ACC position.
(Default)
ACC OFF
¡ When power is turned off, the security message is shown
and the face plate removal alarm sounds (at Security
Function ON setting).
CQ-D5501N
45
E
N
G
L
I
S
H
User Settings
45
q
E
N
G
L
I
S
H
The following information explains the settings only about the disc player and displayed contents on the screen.
(Only for Remote Control Unit)
Display “Main Menu”.
Press [MENU].
w
Select each setting menu.
Press one of the numeric buttons from [1] to [8].
(Example: “1. Menu Language”)
<Main Menu>
1. Menu Language
2. Subtitle Language
3. Audio Language
4. OSD Language
5. TV Type
6. TV Display
7. On-Screen Messages
8. D. Range Compression
: English
: English
: English
: English
: PAL
: WIDE
: ON
: OFF
1. Menu Language
2. Subtitle Language
3. Audio Language
4. OSD Language
5. TV Type
6. TV Display
7. On-Screen Messages
8. D. Range Compression
<Menu Language>
: English
: English
: English
: English
: PAL
: WIDE
: ON
: OFF
Select
Language
1. English
2. French
3. Spanish
4. Chinese
5. German
6. Italian
7. Other
8. Return
r
Finish the setting.
46
Press [0] (Exit). (The setting is completed.)
Note:
¡To apply changes to the setting, be sure to
press [0] (Exit) at the end.
¡After the user settings have been changed and
entered, the player returns to the start of the
disc.
¡When the disc has predetermined language or
other settings, the user settings are not
reflected.
0. Exit
Note:
¡The Main Menu has been set for this unit. It is
not set for any DVD disc.
¡Main menu setting is possible only if the disc
source has been selected. (No disc playing)
1. Menu Language
Default: English
2. Subtitle Language
Default: English
STOP
Press one of the numeric buttons from [1] to [9].
(Example: “1. English”)
<Main Menu>
0. Exit
POWER
SOURCE
e
Select each item.
PAUSE
PLAY
1. English
2. French
3. Spanish
4. Chinese
5. German
6. Italian
7. Other
8. Return
(a Page 50)
The display returns to “Main Menu”.
1. English
2. French
3. Spanish
4. Chinese
5. German
6. Italian
7. Other
8. Disp Off
9. Return
(a Page 50)
Subtitle language is not displayed.
The display returns to “Main Menu”.
1. English
2. French
3. Spanish
4. Chinese
5. German
6. Italian
7. Other
8. Return
(a Page 50)
The display returns to “Main Menu”.
1. English
2. Chinese
3. Return
The display returns to “Main Menu”.
Note:
¡ A disc supporting closed captioning and subtitles
may overlap on the screen. In this case, turn the
subtitle off.
SRC
TRACK / SEARCH
[MENU]
2
3
SEL
SUBTITLE AUDIO ANGLE
4
5
6
RANDOM
SCAN
REPEAT
7
8
9
OSD
[0]
(Finish the
setting.)
CQ-D5501N
VOL
TRACK
GRP
MUTE
DRC TITLE / CHAPTER
0
CAR AV
46
Default: English
EN
1
Numeric buttons
[1] – [9]
R
RET
3. Audio Language
TITLE
MENU
TE
RETURN
4. OSD Language
Default: English
CQ-D5501N
47
E
N
G
L
I
S
H
User Settings (continued)
47
q
E
N
G
L
I
S
H
The following information explains the settings only about the disc player and displayed contents on the screen.
(Only for Remote Control Unit)
Display “Main Menu”.
Press [MENU].
w
Select each setting menu.
Press one of the numeric buttons from [1] to [8].
(Example: “6. TV Display”)
<Main Menu>
1. Menu Language
2. Subtitle Language
3. Audio Language
4. OSD Language
5. TV Type
6. TV Display
7. On-Screen Messages
8. D. Range Compression
e
Select each item.
Press one of the numeric buttons from [1] to [4].
(Example: “2. Pan & Scan (4:3)”)
<Main Menu>
: English
: English
: English
: English
: PAL
: WIDE
: ON
: OFF
1. Menu Language
2. Subtitle Language
3. Audio Language
4. OSD Language
5. TV Type
6. TV Display
7. On-Screen Messages
8. D. Range Compression
0. Exit
<TV Display Mode>
: English
: English
: English
: English
: PAL
: WIDE
: ON
: OFF
Select TV
Display Mode
5. TV Type
1. NTSC
TV standard format setting
Default: PAL
Note:
Setting should be made to match the format of the connected monitor. Select NTSC if connections are made
possible for both NTSC and PAL. If you select PAL, a
picture may be partly omitted.
2. PAL
3. Multi
4. Return
6. TV Display
Display aspect setting
Default: WIDE
STOP
48
Press [0] (Exit). (The setting is completed.)
Note:
¡To apply changes to the setting, be sure to
press [0] (Exit) at the end.
¡After the user settings have been changed and
entered, the player returns to the start of the
disc.
¡When the disc has predetermined language or
other settings, the user settings are not
reflected.
0. Exit
Note:
¡The Main Menu has been set for this unit. It is
not set for any DVD disc.
¡Main menu setting is possible only if the disc
source has been selected. (No disc playing)
POWER
SOURCE
1. WIDE (16:9)
2. Pan & Scan (4:3)
3. Letterbox (4:3)
4. Return
r
Finish the setting.
PAUSE
The unit transmits the NTSC formatted signal in either case, playing an NTSC formatted video or a
PAL formatted video.
The unit transmits the PAL formatted signal in either case, playing an NTSC formatted video or a
PAL formatted video.
The unit transmits the same video signal as the output of playing video software.
Note:
¡If the connected monitor cannot automatically select between NTSC and PAL according to the
video signal of the disc to be reproduced, images on the screen may be distorted. Select NTSC
or PAL at the monitor side depending to the disc to be reproduced.
The display returns to “Main Menu”.
1. WIDE (16:9)
2. Pan & Scan (4:3)
3. Letterbox (4:3)
4. Return
Plays in Wide mode when a wide-screen monitor is connected.
Plays in Pan & Scan mode when a conventional monitor is connected.
Plays in Letterbox mode when a conventional monitor is connected.
The display returns to “Main Menu”.
Note:
¡If “Pan & Scan” or “Letterbox” is already set in the software, this setting is ignored.
PLAY
SRC
TITLE
MENU
[MENU]
1
2
Numeric buttons
[1] – [9]
TE
RET
RETURN
R
TRACK / SEARCH
EN
3
SUBTITLE AUDIO ANGLE
4
5
6
RANDOM
SCAN
REPEAT
7
8
9
OSD
[0]
(Finish the
setting.)
CQ-D5501N
VOL
TRACK
GRP
0
MUTE
DRC TITLE / CHAPTER
CAR AV
48
SEL
7. On-Screen Messages
This is to select On-screen Display messages which
will be displayed when On-screen Display is turned
off by pressing [OSD] (a Page 33).
Default: ON
8. D.Range Compression
By compressing the range of the playback level (the
dynamic range), it is possible to maintain the impact
of audio even at low volumes.
This function only works with Dolby Digital encoded
material.
Default: OFF
1. ON
2. OFF
3. Return
1. Minimum
2. Standard
3. OFF
4. Return
When power is turned on, On-Screen Display message such as “Play” and “Pause”
will be displayed on the screen for 5 seconds.
When power is turned on, On-Screen Display messages such as “Play” and
“Pause” will not be displayed on the screen.
The display returns to “Main Menu”.
Most compressed mode: TV
broadcasts ,etc
Mode recommended by software
creators for listening at low volumes.
Does not compress the dynamic
range.
The display returns to “Main Menu”.
Note:
¡ When it is difficult to hear comparatively small
sound (such as movie dialogue), setting “Minimum”
will make those sounds easier to hear.
CQ-D5501N
49
Definition of Terms
(Only for Remote Control Unit)
In “Other” cases (Menu Language, Subtitle Language, Audio Language) (a Page 46)
q
Press numeric buttons from
[0] to [9] to input the 4 digit
language code. (See below.)
¡ To input the number again,
press [RET] (RETURN).
w
Press [ENTER] to finalize the
selection.
¡ Setting is finished and the
display returns to “Main
Menu”.
POWER
SOURCE
STOP
PAUSE
PLAY
3
SEL
SRC
TRACK / SEARCH
[RET]
RET
TITLE
MENU
1
2
RETURN
R
49
Language Code List
[ENTER]
TE
E
N
G
L
I
S
H
EN
SUBTITLE AUDIO ANGLE
4
5
6
RANDOM
SCAN
REPEAT
8
9
7
OSD
[0] – [9]
VOL
TRACK
GRP
0
MUTE
DRC TITLE / CHAPTER
CAR AV
50
Code
Language Name
Code
Language Name
Code
Language Name
6565
6566
6570
6577
6582
6583
6589
6590
6665
6669
6671
6672
6678
6679
6682
6765
6779
6783
6789
6865
6869
6890
6976
6978
6979
6983
6984
6985
7065
7073
7074
7079
7082
7089
7165
7168
7176
7178
7185
7265
7273
7282
7285
Afar
Abkhazian
Afrikaans
Ameharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bengali; Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Greek
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faroese
French
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
7289
7365
7378
7383
7384
7387
7465
7473
7487
7565
7575
7576
7577
7578
7579
7583
7585
7589
7665
7678
7679
7684
7686
7771
7773
7775
7776
7778
7779
7782
7783
7784
7789
7865
7869
7876
7879
7982
8065
8076
8083
8084
8185
Armenian
Interlingua
Indonesian
Icelandic
Italian
Hebrew
Japanese
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Oriya
Punjabi
Polish
Pashto, Pushto
Portuguese
Quechua
8277
8279
8285
8365
8368
8372
8373
8375
8376
8377
8378
8379
8381
8382
8385
8386
8387
8465
8469
8471
8472
8473
8475
8476
8479
8482
8484
8487
8575
8582
8590
8673
8679
8779
8872
8979
9072
9085
Rhaeto-Romance
Romanian
Russian
Sanskrit
Sindhi
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Tonga
Turkish
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Chinese
Zulu
CQ-D5501N
Digital audio output connector (Optical)
The digital audio output connector (optical) converts
electrical signals into optical signals and transfers
them to the amplifier. Consequently, it has a number
of features including its immunity from electrical interference from external sources and its ability to prevent
the generation of noise and its minimal effect on the
external environment.
Dolby Digital
This fully discrete format divides the music signals
into 5.1 channels: Front Left (L), Front Right (R),
Centre (C), Left Surround (LS), Right Surround (RS)
and Subwoofer (SW: 0.1 channel) for recording and
playback. The number of channels that are recorded
depends on the software. (1 to 5.1 channels)
Manufactured under license from Dolby
Laboratories.
“Dolby” and the double-D symbol are trademarks
of Dolby Laboratories.
Confidential unpublished works. Copyright
1992–1997 Dolby Laboratories. All rights
reserved.
Interactive DVD
An interactive DVD is DVD software which includes
multiple angles, multiple plot endings, etc.
Letterbox screen
This refers to a screen on which the playback picture
of wide-screen DVDs or VCD (Video CD)s appears
with black bands running along the top and bottom.
LPCM (Linear PCM audio)
In this format, the audio signal is converted to digital
data and recorded in two channels without compression. Because the capacity of a DVD disc is large, it
can store more data with better accuracy than a CD.
MPEG (Moving Picture Experts Group)
MPEG is an international standard format for the compression of motion video as defined by the Moving
Picture Experts Group, a working committee which
functions under the auspices the International
Electrotechnical Commission. The Group established
the MPEG 2 Standard in 1994. MPEG2 built on
MPEG1 with many improvements, and it yield a higher
picture quality level.
Pan & Scan screen
This refers to a screen on which the playback picture
of wide-screen DVDs or VCD (Video CD)s is cut off at
the left and right sides.
E
N
G
L
I
S
H
50
Playback control (VCD (Video CD))
If the VCD (Video CD) has “With Playback Control” or
others written on the disc surface or on the jacket, the
scenes or information to be viewed (or listened to) can
be selected interactively with the screen by looking at
the menu shown on the screen.
In these instructions, playback using the menu screen
is referred to as the “menu play” for video CDs. This
player supports Video CDs with playback control.
Title, Chapter (DVD)
DVDs are divided into some large sections (titles) or
some small sections (chapters). Each section is numbered; these numbers are called “Title number” or
“Chapter number”.
Title 1
Chapter 1
Title 2
Chapter 2 ……
Chapter 1 ……
Track (Video CD/CD)
Video CDs or CDs are divided into some sections
(tracks). Each section is numbered; these numbers are
called “Track number”.
Track 1
Track 2
Track 3
Track ……
“DTS” and “DTS Digital Out” are trademarks of Digital
Theater Systems, Inc.
This product incorporates copyright protection
technology that is protected by U.S. patents and
other intellectual property rights. Use of this
copyright protection technology must be authorized
by Macrovision, and is intended for home and other
limited viewing uses only unless otherwise
authorized by Macrovision. Reverse engineering or
disassembly is prohibited.
CQ-D5501N
51
E
N
G
L
I
S
H
51
Anti-Theft System
Fuse
If the fuse blows out, consult your dealer, or your nearest authorized Panasonic Service Centre.
This unit is equipped with a removable face plate. Removing
this face plate makes the unit totally inoperable. SLED will
blink.
Warning
Contact
Remove the Face Plate
q Switch off the power of the unit.
w Press [
] (Release) to remove the face plate. (The face
plate disengages with a click when it is removed.)
e Place the face plate into the case and take it with you when
you leave the car.
[
¡Use fuses of the same specified rating (15 A). Using substitutes or fuses with higher ratings, or connecting the unit
directly without a fuse could cause fire or damage to the unit. If the replaced fuse fails, contact your nearest
authorized Panasonic Service Centre.
Maintenance
Removable
Face Plate
Case
This unit is designed and manufactured to ensure the minimum of maintenance. Use a dry, soft cloth for routine exterior
cleaning. Never use benzine, thinner, or other solvents.
Notes on Discs
How to hold a disc
Install the Face Plate
Printed side
¡ Do not touch the underside of a disc.
¡ Do not scratch a disc.
¡ Do not bend a disc.
¡ When not in use, keep a disc in a case.
Contact
q Slide the left side of the face plate in place.
w Press the right end of the face plate until a “click” is heard.
2
Do not use irregularly shaped discs.
Do not leave discs in the following places:
1
¡ In direct sunlight
¡ Near car heaters
¡ Dirty, dusty and damp areas
¡ On seats and dashboards
Security Indicator (SLED)
Disc cleaning
SLED blinks when the face plate is removed from the unit.
This function is activated when the Security Function is ON.
(a Page 44)
Do not attach any seals or labels to your discs.
Use a dry, soft cloth to wipe from the centre outward.
<Correct>
<Wrong>
SLED
Caution
¡ This face plate is not waterproof. Do not expose it to water or excessive moisture.
¡ Do not remove the face plate while driving your car.
¡ Do not place the face plate on the dashboard or nearby areas where the temperature rises high.
¡ Do not touch the contacts on the face plate and on the main unit, since this may result in poor electrical contact.
¡ If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.
¡ To avoid damaging the face plate, do not push it down or place objects on it while it is open.
¡ The face plate will automatically close about 5 seconds after [
] (Release) is pressed while the face plate is tilted
or open, so take care to ensure that your fingers will not be pinched by the closing face plate.
CQ-D5501N
Do not use irregularly shaped discs.
Do not write on the disc label with a ballpoint pen or other
hard-point pens.
Face Plate Removal Alarm
This alarm sounds to warn you not to forget to remove the
face plate before leaving your car.
This function is activated when the Security Function is ON.
(a Page 44)
52
1
] (Release)
Note:
¡Be absolutely sure to turn off the power of the unit before
removing the face plate.
¡Do not install or remove the face plate while it is moving.
52
E
N
G
L
I
S
H
Notes on CD-Rs/RWs, DVD-Rs/RWs
¡ You may have trouble playing back some CD-R/RW, DVD-R/RW discs recorded using CD/DVD recorders (CD-R/RW,
DVD-R/RW drives), either due to their recording characteristics or dirt, fingerprints, scratches, etc. on the disc surface.
¡ CD-R/RW, DVD-R/RW discs are less resistant to high temperatures and high humidity than ordinary music CDs/DVDs.
Leaving them inside a car for extended periods may damage and make playback impossible.
¡ Some CD-R/RWs, DVD-R/RWs cannot be played back successfully due to incompatibility among writing software, a
CD/DVD recorder (CD-R/RW, DVD-R/RW drive) and the discs.
¡ This player cannot play the CD-R/RW, DVD-R/RW discs if the session is not closed.
¡ Be sure to observe the instructions of the CD-R/RW, DVD-R/RW disc for handling it.
¡ This player cannot play the CD-R/RW discs which contain other than CD-DA or MP3 data.
CQ-D5501N
53
E
N
G
L
I
S
H
53
E
N
G
L
I
S
H
Installation
Consult a professional for installation.
Warning
❐ This installation information is designed for professional installers with knowledge of automobile electrical safety systems and is not intended for non-technical, do-it-yourself individuals. It does not contain instructions on the electrical
installation and avoidance of potential harm to air bag, anti-theft and ABS braking or other systems necessary to install
this product. Any attempt to install this product in a motor vehicle by anyone other than a professional installer could
cause damage to the electrical safety system and could result in serious personal injury or death.
❐ If your car is equipped with air bag and/or anti-theft systems, specific procedures may be required for connection and
disconnection of the battery to install this product. Before attempting installation of this electronic component against
the manufacturer’s recommendation, you must contact your car dealer or manufacturer to determine the required procedure and strictly follow their instructions.
FAILURE TO FOLLOW THE PROCEDURE MAY RESULT IN THE UNINTENDED DEPLOYMENT OF AIR BAGS OR ACTIVATION OF THE ANTI-THEFT SYSTEM RESULTING IN DAMAGE TO THE VEHICLE AND PERSONAL INJURY OR DEATH.
How to install the unit
Verify the radio using the antenna and speakers before installation.
Mounting Angle
side to side : horizontal
front to rear : 0 – 30°
53 mm
mm
53
0 – 30°
182
mm
182
mm
Supplied Hardware
No.
4.5 mm
mm
4.5
mm––6.0
6 mm
Item
Diagram
Mounting Collar
(YEFX0217263)
Mounting Bolt (5 mmø)
Q'ty
No.
Item
1
Trim Plate
1
Power Connector
the cable from the battery
1 Remove
negative terminal.
¡ Wear gloves for safety
¡ Make sure that wiring is completed
before installation.
¡ When this unit is installed in dashboard,
ensure that there is sufficient air flow around the unit to
prevent damage from overheating, do not block any
ventilation holes on the unit.
unit without backlash.
3 Connection of power connector t.
unit securing
4 Main
q Screw the Mounting bolt w into the main unit.
Remove Mounting Collar q and Trim Plate r from the
main unit temporarily, which are already mounted at shipment.
1
(YEAJ012852)
1
ISO Antenna Adapter
2
Lock Cancel Plate
*
* w, e, y and u consist of a set. (YEP0FZ5725)
1
Clip Connector
*
How to remove the unit
1 Remove the face plate.
3 Lock release
q Insert the lock cancel plate y until you hear a click.
w Pull the main unit.
q
w Secure to the fire wall.
e Snap the right and left springs into each hole.
2
3
Q'ty
1
*
collar q insertion.
2 Mounting
Bend appropriate tabs to secure the
Diagram
(YEFC05652)
*
Caution
54
Mounting Space
q
5
6 Battery Cable reconnection
Trim plate r mounting
4
w
q
w
e
4
w
Securing to fire wall
Using the rubber bushing
(Option)
2 Remove the trim plate r.
Using the rear support strap
(Option)
3 mm ø
Rubber Bushing
(Option)
Mounting Bolt w
CQ-D5501N
4 Pull out the unit with both hands.
e
Tapping screw (Option)
Rear support To the unit
bracket
Hexagonal nut
(supplied with car)
(Option)
54
4
Clank!
5
6
Rear support
strap (Option)
Mounting Bolt w
q
w
Snapping Point
CQ-D5501N
55
E
N
G
L
I
S
H
Wiring
Before Wiring
55
¡ Exclusively operated with 12 V battery with negative (–) ground.
¡ Connect the power lead (red) very last.
¡ Connect the battery lead (yellow) to the positive (+) terminal of the battery or fuse block terminal (BAT).
¡ Apply insulating tape to bare leads.
¡ Secure loosened leads.
Connecting the Parking Brake Connection Lead
E
N
G
L
I
S
H
56
Caution
¡ For safety, be sure to ask your nearest professional installer to do this connection.
Hand brake
Foot brake
q Attach a Clip Connector u to the end
of the parking brake connection lead.
Parking brake
switch
Speaker Connection
Connect as follows
¡ Use ungrounded speakers only.
Allowable input: 50 W or more
Impedance: 4 – 8 Ω
¡ Distance between speaker and amplifier: 30 cm or more
¡ Do not use a 3-wire type speaker system having a common
earth lead.
Caution
¡ Do not connect more than one speaker to one set of
speaker leads. (except for connecting to a tweeter)
The parking brake switch position varies with the car
model.
For details on the exact location of the parking brake
switch in your car, contact your dealer.
Parking Brake Lead
(Blue/yellow stripe)
When the parking brake lever is
engaged, the unit is grounded by the
chassis.
Parking Brake Lead
(Blue/yellow stripe)
w The Clip Connector u is connected to
the power source side lead of the parking brake.
Brake light
Battery
+
PARKING BRAKE
Clip Connector u
–
Car chassis
Power source side lead
When connecting this unit to the rear monitor:
¡ The parking brake lead and grand lead should be connected to the same terminal.
56
CQ-D5501N
CQ-D5501N
57
E
N
G
L
I
S
H
57
E
N
G
L
I
S
H
Wiring (continued)
Caution
¡Check the connectors provided on your car (see precaution below) before connecting the system.
¡To prevent damage to the unit, be sure to follow the
connection diagram.
¡Strip about 5 mm of the lead ends for connection
(only non-ISO connector cords).
¡Do not insert the power connector into the unit until
the wiring is completed.
Basic Connection
VIDEO-OUT
RCA Cord (supplied with CQ-D5501N)
VIDEO-OUT (Yellow)
VIDEO-IN
(Yellow)
ISO Antenna
Adapter e
(If needed)
Precautions (ISO Connector)
ISO
Power Connector
Standard ISO
A7: IGN or ACC switched 12 V supply
(Red) C (Red)
A7
VIDEO-CONT
PARKING BRAKE
1
3
2
*Fuse (15 A) Refer fuse replacement
to your nearest authorized Panasonic
Service Centre. Do not try fuse replacement by yourself.
External Amplifier Control Power Lead
(Blue/white stripe)
To an external amplifier.
A7 (Red)
ACC
Speakers
B8 : Rear Left –
B7 : Rear Left +
B6 : Front Left –
B5 : Front Left +
A8 (Black)
ACC
BATTERY 15A
(Yellow) C (Yellow)
A4
A4: +12 V Battery (Permanent supply)
A
Parking Brake Lead
(Blue/yellow stripe)
Be sure to wire the parking brake for safety and preventing
accidents.
External Remote Control Lead
(Brown/black stripe)
When using non-Panasonic external remote control, refer to
the manufacture for their product before connecting.
External Mute Lead
(Orange)
To the Navi Mute lead of the Panasonic car navigation system
or car telephone mute lead.
Video control Lead
(Green/yellow stripe)
DVD Player/Receiver
¡The pin arrangement of the power connector conforms to ISO standard.
¡The pin arrangement of ISO connectors in some cars
may differ from the ISO standard.
¡Please check that the pin arrangement of the connector in your car conforms to ISO standard.
¡For car types A and B, change the wiring of the red
and yellow leads as shown at below.
¡After connection, insulate the portions marked (C)
with insulating tape.
Note:
¡For cars other than types A and B, please consult
your local car shop.
CY-VM1500EX
(Option)
Color LCD Display
Antenna
CQ-D5501N
A5 (Blue/white stripe)
A4 (Yellow)
BATTERY 15A
B5
B6
B7
Car Type A
C (Yellow)
A7 : Power Lead (ACC or IGN) (Red)
To ACC power, +12 V DC.
B8 (Green/black stripe)
BATTERY 15A
ACC
(Yellow) C
(Red)
B6 (White/black stripe)
B7 (Green)
B4 (Gray/black stripe)
B5 (White )
B2 (Violet/black stripe)
B3 (Gray)
A4: IGN or ACC switched 12 V supply
B
Car Type B
A7: +12 V Battery (Permanent supply)
(Red)
C
(Red)
ACC
BATTERY 15A
(Yellow) C
A4: No connection
58
CQ-D5501N
(Yellow)
B4 : Front Right –
B3 : Front Right +
B2 : Rear Right –
B1 : Rear Right +
A8 : Ground Lead (Black)
To a clean, bare metallic part of the car chassis.
B8
A7: +12 V Battery (Permanent supply)
(Red)
58
B1 (Violet )
A4 : Battery Lead (Yellow)
To the car battery, continuous +12 V DC.
A5 : Motor Antenna Relay Control Lead
(Blue/white stripe)
B4
B3
B2
B
B1
A
To Motor Antenna (Max. 100 mA).
This lead is not intended for use with a switch
actuated power antenna.
Note:
¡The power antenna extends automatically
when the power of this unit is turned on.
CQ-D5501N
59
E
N
G
L
I
S
H
59
E
N
G
L
I
S
H
Wiring (continued)
Connection with the Digital Surround Processor (CY-AC300EX)
60
Connection with Digital Surround Processor (CY-AC300EX, Option) Power Amplifiers (Option) and monitors.
Note:
¡Refer to the operating instructions for the connected devices, in addition.
REAR
Digital Surround Processor
CY-AC300EX (Option)
Operating Unit/Main Unit
Connecting DIN Cord
(Supplied with CY-AC300EX)
SUB•W
(L)(White)
PRE-OUT FRONT
VIDEO-OUT (Yellow)
RCA Cord (supplied with CQ-D5501N)
VIDEO-OUT
(R)(Red)
(L)(White)
L
DIGITA
R
OUND
PRE-OUT (Front)
RCA Cord (Option)
FRONT
PRO LOGIC
PROCESSO
AL SURR
DIGAT
CE
UR
SO
ker
er Spea
AC300
r Amp
super
VOL
SE
L
MUTE
SOURCE
t mult
i-color
display
& 30w
Powe
brigh
4
2
lifier
for Cent
POSITION
DR COM
E
SPAC
DIMM
ER
DIM
(R)(Red)
SPC
P POSI
3
CY-AC300EX
Main Unit (Rear)
1
PWR
(Front)
ANALOG-IN
L L
CQ-D5501N
DVD Player/Receiver
DIGITAL-IN
L R
Ground Lead
To a clean, bare metallic part of the
car chassis.
(Black)
(Red)
Power Lead
To ACC power,
+12 V DC
ACC
R R
Power
Connector
(Supplied with
CY-AC300EX)
Optical Fiber Cable
(CA-LRD60, option)
VIDEO-IN
(Yellow)
Power Connector
RCA Cord (option)
(When a Y-shaped
cord is used)
Resistor (220 Ω)
Digital out
(L)(White)
(L)(White)
(Yellow)
Battery Lead
To the car battery,
continuous +12 V DC
BATTERY 5A
(R)(Red)
(L)(White)
(R)(Red)
(R)(Red)
Fuse (5 A)
4ch External Power
Amplifier
(option)
2ch External
Power Amplifier
(option)*
(Black/green stripe)
Centre Speaker Cord
Video control Lead
(Green/yellow stripe)
CENTER
(Black)
AMP-CONT MAX 0.1A
External
Amplifier
Control Power
Lead
(Blue/white stripe)
VIDEO-CONT
External Amplifier
Control Power Lead
(Blue/white stripe)
External Amplifier Control
Power Lead
(Blue/white stripe)
(Connect to AMP-CONT)
Centre Speaker
EAB-CF2
(option)
Right
Left
Rear Speakers
CJ-DA6920N
Sub-Woofer
CJ-HD303N
Left
Right
CY-VM1500EX
(Option)
Color LCD Display
Notes on handling optical fiber cable:
¡Do not allow the cable to be damaged by getting it
caught in the door, placing a heavy object on it, etc.
¡Make sure that the cable is not strained when it is
connected.
¡Do not bend the cable sharply.
Front Speakers
CJ-DA1700N
25 mm or more
* For use as a monaural amplifier (Bridge connection) (option)
60
CQ-D5501N
CQ-D5501N
61
E
N
G
L
I
S
H
E
N
G
L
I
S
H
Wiring (continued)
Connection with CD Changer (CX-DP880N)
61
Connection with CD changer (CX-DP880N) (Option).
Note:
¡Refer to the operating instructions for the connected devices, in addition.
VIDEO-OUT
(White)
S.W-OUT
SW-OUT (Mono)
PRE-OUT (Rear)
RCA Cord (supplied with CQ-D5501N)
(Red)
CH/AUX-IN
CH/AUX-IN
RCA Cord
CX-DP880N (Option)
CD Changer Unit
(R)(Red)
PRE-OUT FRONT
Final Check
1. Make sure that all wires are properly connected and insulated.
2. Make sure that the main unit is securely held in the mounting collar.
3. Turn on the ignition to check the unit for proper operation.
DIN Cord
(R)(Red)
Extension Cord
(DIN/BATT/RCA/GND)
CQ-D5501N
Connect all wires, making sure that each connection is insulated and secure. Bundle all loose wires and fasten them with tape so they
will not fall down later. Now insert the unit into the mounting collar.
Congratulations! After making a few final checks, you’re ready to enjoy your new auto stereo system.
(L)(White)
(R)(Red)
(L)(White)
PRE-OUT (Front)
62
Lead Connections
VIDEO-OUT (Yellow)
(L)(White)
PRE-OUT REAR
Final Installation
If you have difficulties, consult your nearest authorized professional installer for assistance.
Ground Lead
To a clean, bare metallic
part of the car chassis.
Power Connector
DVD Player/Receiver
Battery Lead
To the car battery, continuous + 12 V DC.
RCA Cord (option)
VIDEO-IN
(Yellow)
PRE-OUT (Front/Rear)
External Amplifier
Control Power Lead
(Blue/white stripe)
2ch External
Power Amplifier
(option)*
4ch External
Power Amplifier
(option)
VIDEO-CONT
Video Control Lead (input)
(Green/yellow stripe)
CY-VM1500EX
(Option)
Color LCD Display
Sub-woofer
CJ-HD303N
Rear Speakers
CJ-DA6920N
Front Speakers
CJ-DA1700N
*For use as a monaural amplifier
(Bridge connection) (option).
-
62
CQ-D5501N
+
-
+
-
+
-
+
CQ-D5501N
63
E
N
G
L
I
S
H
Troubleshooting
63
Check and take steps as described below.
If You Suspect Something Wrong
Warning
If the described suggestions do not solve the problem, it is recommended to take the unit to your nearest authorized Panasonic
Service Centre. The product should be serviced only by qualified
personnel. Please refer the checking and the repair to professionals. Panasonic shall not be liable for any accidents arising
out of neglect of checking the unit or your own repair after your
checking.
¡Do not use the unit in an irregular condition,
for example, without sound, or with smoke or
a foul smell, which can cause ignition or electric shock. Immediately stop using the unit
and consult your dealer.
¡Never try to repair the unit by yourself
because it is dangerous to do so.
■ Common
Problem
Possible cause a Possible solution
The power cord (battery, power and ground) is connected in the wrong way.
aCheck the wiring.
No power to the unit
Fuse blows out.
aEliminate the cause of fuse blowout and replace the fuse with new one.
Consult your dealer.
MUTE is set to ON.
aSet MUTE to OFF.
Sound is not generated.
There is contact between the external mute lead and the chassis.
aConnect the external mute lead correctly. If the lead is unused, insulate
it.
■ Common (continued)
Problem
No sound from speaker(s)
There is an electromagnetic-wave generator such as a cellular phone near the
unit or its electrical lines.
aKeep the electromagnetic-wave generator such as a cellular phone
away from the unit and the wiring of the unit. If noise cannot be eliminated due to the wiring harness of the car, consult your dealer.
Noise
64
1
Balance/Fader setting is not appropriate.
aReadjust Balance/Fader.
There is a break, a short circuit, poor contact or wrong wiring regarding the
speaker wiring.
aCheck the speaker wiring.
The speaker wiring is reversed between right and left.
aPerform the speaker wiring in accordance with the wiring diagram.
The sound field is not
clear in the stereo
mode. Central sound is
not settled.
The plus and minus terminals at right and left channels of speakers are connected reversely.
aPerform the speaker wiring in accordance with the wiring diagram.
The power of the unit
fails unintentionally.
The safety device works.
aConsult your dealer, or your nearest Panasonic Service Centre.
■ Remote control unit
Problem
Possible cause a Possible solution
The battery is inserted in the wrong direction. A wrong battery is inserted.
aInsert a correct battery in the correct direction.
The battery is weak.
aReplace the battery with new one.
You cannot operate the unit while the demonstration screen appears.
aPress [DISP] to end the demonstration screen.
If the demonstration screen appears frequently, there is a possibility that poor
contact or wrong wiring arises between the battery lead of the unit and the
battery cable of the car. (The battery lead should be always powered.)
aCheck the battery wiring in accordance with the wiring diagram.
Possible cause a Possible solution
The speaker channels
are reversed between
right and left.
The wiring of speaker lines are not correct, or a break or poor contact arises.
aCheck the wiring in accordance with the wiring diagram. (a Page 58)
The demonstration
screen displayed and
no operable
E
N
G
L
I
S
H
No response to pressing buttons
The aiming direction of the remote control unit is wrong.
aAim the remote control unit at the sensor of the unit and press buttons.
The sensor is exposed to direct sunlight. (The remote control unit may not be
operable when the sensor is exposed to direct sunlight. In such a case, the
system is not faulty.)
aBlock off sunlight to the sensor.
The contact of the ground lead is poor.
aMake sure that the ground lead is connected to an unpainted part of the
chassis securely.
64
Noise is made in step
with engine revolutions.
Alternator noise comes from the car.
aChange the wiring position of the ground lead.
aMount a noise filter on the power supply.
Some operations are
not executable.
Some operations are not executable in particular modes such as menu mode.
aRead the operating instructions carefully and cancel the mode. If the
unit is still out of order, consult your dealer.
CQ-D5501N
CQ-D5501N
65
E
N
G
L
I
S
H
Troubleshooting
(continued)
■ Radio
65
■ CD
Problem
Poor reception or
noise
FM Stereo broadcast is
received only in mono.
Possible cause a Possible solution
Antenna installation or wiring of antenna cable is faulty.
aCheck whether the antenna mounting position and its wiring are correct.
In addition, check to see whether the antenna ground is securely connected to the chassis.
No power is supplied to the antenna amplifier (when using a film antenna,
etc.).
aCheck the wiring of the antenna battery lead.
The MONO mode is active.
aCancel the MONO mode.
Only strong signal stations can be received.
The LOCAL mode is active.
aCancel the LOCAL mode.
The number of auto
preset stations is less
than 6.
The number of receivable stations is less than 6.
aMove to an area where receivable stations number is maximum, and try
presetting.
Preset stations cannot
be stored.
The contact of the battery lead is poor, or the battery lead is not always powered.
aMake sure that the battery lead is connected securely, and preset stations again.
Problem
No playback or disc
ejected
Sound skipping or
noise
Sound skipping due to
vibration
Disc unejectable
Problem
Possible cause a Possible solution
PS does not appear
even if an RDS station
is tuned in to. (“NO
PS” appears.)
A PS code cannot be received for the reason of bad receiving conditions, etc.
aA PS code appears if it is received. Wait for a while until conditions
change.
Receiving programmes
differs from PTY that
was already set up.
When the station changed between programmes, the unit could not receive
the PTY code.
aAn appropriate programme is searched for and tuned into after receiving a corresponding PTY code. Therefore, wait for a while.
“NONE” appears when
selecting PTY.
Any specified PTY programmes cannot be received. There is no desired programme being broadcast in your area.
aSelect another PTY, or wait until a desired programme starts.
The clock time (CT)
does not indicate
accurately.
The unit received a station broadcasting time that is not appropriate for you,
or the unit is receiving a station that does not broadcast time.
aReceive a station broadcasting time that is appropriate for your area, or
adjust CT manually.
An AF station cannot
be received even if AF
indicator lights.
There is little difference in receiving conditions between the current station
and AF stations. Update of AF list ended in failure.
aWait until the AF list is successfully updated. For unstable reception,
tune in to a stable station by the hand.
CQ-D5501N
Possible cause a Possible solution
66
1
The disc is inserted upside down.
aInsert a disc correctly.
There is a flaw or foreign objects on the disc.
aRemove the foreign objects, or use a flawless disc.
There is a flaw or foreign objects on the disc.
aRemove the foreign objects, or use a flawless disc.
The unit is not sufficiently secured.
aSecure the unit to the console box.
The unit is tilted at over 30˚ in the front-to-end direction.
aMake the angle 30˚ or less.
Something such as a peeled label obstructs the disc coming out.
aPress and hold the [OPEN] for more than 2 seconds when the face plate
is open (disc forced ejection). In case that the disc forced ejection does
not work, consult your dealer.
The microcontroller in the unit operates abnormally due to noise or other factors.
aUnplug the power cord and plug it again. In case the unit is still out of
order, consult your dealer.
■ MP3
Problem
■ RDS
66
E
N
G
L
I
S
H
Possible cause a Possible solution
No playback or disc
ejected
The disc has unplayable formatted data.
aRefer to the description about MP3 for playable sound data except CDDA (i.e. music CD).
The CD-R/RWs that are
playable on other
devices are not
playable on this unit.
The playability of some CD-R/RWs may depend on the combination of media,
recording software and recorder to be used even if these CD-R/RWs are
playable on other devices such as a PC.
aMake CD-R/RWs in a different combination of media, recording software
and recorder after referring to the description about MP3.
Sound skipping or
noise
There is a flaw or foreign objects on the disc.
aRemove the foreign objects, or use a flawless disc. For MP3, refer to the
description about MP3.
Playing VBR (Variable Bit Rate) files may cause sound skipping.
aPlay Non-VBR files.
Note:
¡Refer to “Notes on MP3”. (a Page 28)
CQ-D5501N
67
E
N
G
L
I
S
H
67
E
N
G
L
I
S
H
Troubleshooting (continued)
■ DVD/VCD
Error Display Messages
Problem
No playback or disc
ejected
Sound skipping or
noise
Sound skipping due to
vibration
Disc unejectable
Possible cause a Possible solution
There is a flaw or foreign objects on the disc.
aRemove the foreign objects, or use a flawless disc.
68
■ CD/MP3
Display
Possible cause a Possible solution
The disc is dirty.
The disc has scratches.
a Eject the disc.
The disc has unplayable formatted data.
aRefer to the description about available disc types.
There is a flaw or foreign objects on the disc.
aRemove the foreign objects, or use a flawless disc.
No operation by some cause.
a Eject the disc. If the disc is not ejected when you press [u] (eject),
unplug the power cord and plug it again. In case the unit is still out
of order, consult your dealer.
The unit is not sufficiently secured.
aSecure the unit to the console box.
The unit is tilted at over 30˚ in the front-to-end direction.
aMake the angle 30˚ or less.
Something such as a peeled label obstructs the disc coming out.
aPress and hold the [OPEN] for more than 2 seconds when the face plate
is open (disc forced ejection). In case that the disc forced ejection does
not work, consult your dealer.
The disc is upside down.
The player for some reason cannot read the file you are trying to play.
(File recorded in an unsupported file system, compression scheme, data
format, file name extension, damaged data, etc.)
a Eject the disc. Select a file that the player can read. Check the type
of data recorded on the disc. Create a new disc if necessary.
The microcontroller in the unit operates abnormally due to noise or other factors.
aUnplug the power cord and plug it again. In case the unit is still out of
order, consult your dealer.
The picture does not
appear on the monitor.
Cables are not correctly connected.
aConnect cables correctly.
aStop the car and apply the parking brake.
The picture appears
incorrectly.
The video signal setting of this unit (NTSC/PAL) does not match with the
video signal setting of the connected monitor.
aMake the same setting between this unit and the monitor.
Video CD menu playback does not work.
aVideo CD menu playback works only when playing a video CD that has
the playback control feature.
The picture becomes
distorted while fast forwarding or reversing.
aA certain amount of distortion is normal.
No subtitles appear.
Subtitle must be recorded on the disc, or they will not appear.
aRefer to the guide provided with your disc.
It is difficult to hear small
sounds. (Dolby digital
DVD software only)
aSet “D.Range Compression” to “Minimum”.
Cannot switch the
audio language/subtitle language/angle.
It is not possible to switch if the disc does not have multiple audio languages/subtitle languages/angles recorded on it.
aRefer to the guide provided with your disc.
aSome discs permit switching through a menu screen.
aSometimes, switching angle is possible only with certain scenes.
■ CD Changer
Option
Display
The disc is dirty or upside down.
The disc has scratches.
After 5 seconds
To next disc automatically
The audio/subtitle language selected in the
user settings is not
used.
If audio or subtitles in that language are not recorded on the disc, the audio or
subtitles do not switch to that language. (Some discs permit switching
through a menu screen.)
aRefer to the guide provided with your disc.
A DVD-R or DVD-RW is
not playable.
The disc is still unfinalized.
aFinalize the disc.
Refer to “Discs that can be Played Back” (a Page 8) or “Notes on
Discs” (a Page 53) for other cases.
Possible cause a Possible solution
a Eject the magazine.
¡Check the disc.
¡Load the disc again.
No operation by some cause.
a Eject the magazine. If the failure persists, press the reset switch on
the CD changer. If normal operation is not restored, consult your
dealer or the nearest Panasonic Service Centre to ask for repairs.
No disc is in the CD Changer (magazine).
a Insert discs into the changer (magazine).
The changer has become disconnected from the unit in the changer mode.
a Verify the wiring.
Note:
¡ Messages in the action and display sections of the error chart vary with changer. Refer to the operating instructions for
the CD changer for details.
Note:
¡Refer to “Discs that can be Played Back”. (a Page 8)
68
CQ-D5501N
CQ-D5501N
69
E
N
G
L
I
S
H
69
Troubleshooting (continued)
Specifications
General
Power supply
Error Display Messages (continued)
■ DVD/VCD
Display
Possible cause a Possible solution
The disc is dirty.
The disc has scratches.
a Eject the disc.
The player will not operate for some reason.
a Eject the disc. If the disc is not ejected when you press [u] (eject),
unplug the power cord and plug it again. In case the unit is still out of
order, consult your dealer.
The disc is upside down.
The player for some reason cannot read the file you are trying to play.
(File recorded in an unsupported file system, compression scheme, data
format, file name extension, damaged data, etc.)
a Eject the disc. Select a file that the player can read. Confirm the type
of data recorded on the disc. Create a new disc if necessary.
This disc may not be played in your region.
An attempt was made to play a disc with a region number that was not “2”
or “ALL”.
a Eject the disc.
: DC 12 V (11 V – 16 V), test
voltage 14.4 V, negative
ground
Current consumption
: Less than 2.3 A (CD mode,
0.5 W 4-channels)
Maximum power output
: 50 W x 4 (at 4 Ω)
Power output
: 22 W x 4 (DIN 45 324, at 4 Ω)
Video Signal system
: NTSC/PAL 1.0 Vp-p 75 Ω
RCA pin jack
Speaker impedance
: 4–8Ω
Tone/SQ adjustment range : SQ Low/Bass: ± 12 dB (at 60
Hz, 80 Hz, 100 Hz, 200 Hz)
SQ Mid: ± 12 dB (at 500 Hz,
1 kHz, 2 kHz, 3 kHz)
SQ High/Treble: ± 12 dB (at
10 kHz, 12 kHz, 15 kHz,
18 kHz)
Pre-amp output voltage
: 2 V (CD mode)
Subwoofer output voltage : 2 V
Pre-amp output impedance : 200 Ω
Subwoofer output impedance : 200 Ω
Dimensions (W x H x D)
: 178 x 50 x 160 mm
Weight
: 1.8 kg
Discs played
(1) DVD-Video disc
12 cm single-sided, single-layer/double-layer
12 cm double-sided, single-layer/double-layer
8 cm single-sided, single-layer/double-layer
8 cm double-sided, single-layer/double-layer
FM Stereo Radio
Frequency range
Usable sensitivity
Stereo separation
: 87.5 MHz – 108 MHz
: 6 dB/µV (S/N 30 dB)
: 35 dB (at 1 kHz)
AM (MW) Radio
Frequency range
Usable sensitivity
: 531 kHz – 1 602 kHz
: 27 dB/µV (S/N 20 dB)
AM (LW) Radio
Frequency range
Usable sensitivity
: 153 kHz – 279 kHz
: 32 dB/µV (S/N 20 dB)
Disc Player
DA converter
Pick-up type
Light source
Frequency response
Signal to noise ratio
Wow and flutter
E
N
G
L
I
S
H
70
:
:
:
:
:
1 bit DAC System
Astigma 3-beam
Semiconductor laser
20 Hz – 20 kHz (CD)
20 Hz – 22 kHz (DVD video
48 kHz sampling)
: 20 Hz – 44 kHz (DVD video
96 kHz sampling)
: 95 dB (IHF, A)
: Below measurable limits
(2) Compact disc (CD-DA, Video CD, CD-R, CD-RW)
12 cm disc
8 cm disc
Digital audio output
Disc
DVD
Video CD
Direct Sales at Panasonic UK
Sales and Support Information
For UK and Ireland customers only.
Customer Care Centre
¡
¡
¡
¡
70
For customers within the UK: 08705 357357
For customers within the Republic of Ireland: 01 289 8333
Visit our website for product information
E-mail: [email protected]
CQ-D5501N
¡ Order accessories and consumable items for your product
with ease and confidence by phoning our Customer Care
Centre Monday - Thursday 9:00am - 5:30pm, Friday
9:30am - 5:30pm. (Excluding public holidays).
¡ Or go on line through our Internet Accessory ordering
application at www.panasonic.co.uk.
¡ Most major credit and debit cards accepted.
¡ All enquiries, transactions and distribution facilities are
provided directly by Panasonic UK Ltd.
¡ It couldn't be simpler!
¡ Also available through our Internet is direct shopping for a
wide range of finished products, so take a browse on our
website for further details.
CD
MP3
Sounds recording format
Dolby Digital
DTS
Liner PCM
(48 kHz 16/20/24 bit)
MPEG 1
Linear PCM
Linear PCM
DTS*
Optional digital audio output from connector
Dolby Digital bitstream (1 – 5.1ch)
DTS bitstream (1 – 5.1ch)(The analog portion is not output)
Liner PCM (2 ch)
(48 kHz sampling/16 bit)
MPEG 1 bitstream
Linear PCM (2 ch) (44.1 kHz sampling/16 bit)
MP3
Linear PCM (2ch) (32 kHz/44.1 kHz/48 kHz sampling/16 bit)
Linear PCM (2 ch) (44.1 kHz sampling/16 bit)
DTS bitstream (1 – 5.1ch) (The analog portion is not output)
*DTS only works optical outputs.
Note:
¡Specifications and design are subject to modification without notice due to improvements.
¡Some figures and illustrations in this manual may be different from your product.
CQ-D5501N
71
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement