Panasonic CQDP153WA Operating instructions

Panasonic CQDP153WA Operating instructions
Removable Front Panel CD Player/Receiver
凄ÌËÚÓ· Ò CD-ÔÎÂÂÓÏ Ë Ò˙ÂÏÌÓÈ ÙÓÌڇθÌÓÈ Ô‡ÌÂθ˛
CQ-DP153WA
PU S
H SEL•MONO/L
DN
AB
D•M
TUNE
TRACK
EM
UL
S
CR
Operating Instructions
CQ-DP153WA
OC
APM
POWER
VO
MUTE
7
8
1
2
9
3
10
11
12
4
5
6
S
CAN
LOUD
REP
CLOCK
D
IS
P
àçëíêìäñàü èé ùäëèãìÄíÄñàà
Matsushita Electric Industrial Co., Ltd.
Web site: http://www.panasonic.co.jp/global/
YFM284C412ZA
• Please read these instructions carefully before using this product and keep this manual for future reference.
• èÂ‰ ̇˜‡ÎÓÏ ˝ÍÒÔÎÛ‡Ú‡ˆËË ‡ÔÔ‡‡Ú‡ ÔÓÒËÏ ÔÓ˜ËÚ‡Ú¸ ̇ÒÚÓfl˘Û˛ ËÌÒÚÛÍˆË˛ ‚ÌËχÚÂθÌÓ Ë ı‡ÌËÚ¸  ̇
ÔÓθÁÓ‚‡ÌË ̇ ·Û‰Û˘ÂÂ.Ç˚·Ë‡ÈÚ Ê·ÂÏ˚È ‚‡ˇÌÚ.
Safety Information
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHHOCK, AND ANNOYING INTERFERENCE, USE
ONLY THE INCLUDED COMPONENTS.
çÄ êìëëäéå üáõäÖ
E
N
G
L
I
S
H
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK OR PRODUCT DAMAGE, DO NOT
EXPOSE THIS APPLIANCE TO RAIN, SPLASHING, DRIPPING OR MOISTURE.
CAUTION!
THIS PRODUCT IS A CLASS I LASER PRODUCT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
2
CQ-DP153WA
Page
Contents
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Clock setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
CD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Anti-Theft System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Electrical Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Speaker Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Remote Control Unit Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CQ-DP153WA
3
E
N
G
L
I
S
H
ëÓ‰ÂʇÌËÂ
ëÚ‡Ìˈ‡
çÄ êìëëäéå üáõäÖ
àÌÙÓχˆËfl ‰Îfl ·ÂÁÓÔ‡ÒÌÓÒÚË . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
ëÓ‰ÂʇÌËÂ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
àÌÒÚÛÍÚË‚Ì˚ Û͇Á‡ÌËfl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
ÄÍÒÂÒÒÛ‡˚ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
鷢ˠ҂‰ÂÌËfl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
ê„ÛÎËӂ͇ ˜‡ÒÓ‚ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
ꇉËÓÔËÂÏÌËÍ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
CD ÔÎÂÂ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
ìÒÚ‡Ìӂ͇. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
ëËÒÚÂχ Ô‰ÓÚ‚‡˘ÂÌËfl Í‡ÊË . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
ëıÂχ ˝ÎÂÍÚ˘ÂÒÍËı ÒÓ‰ËÌÂÌËÈ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
èÓ‰Íβ˜ÂÌË „ÓÏÍÓ„Ó‚ÓËÚÂÎÂÈ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
è·‚ÍËÈ Ô‰Óı‡ÌËÚÂθ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
ìÔ‡‚ÎÂÌË ÔÛθÚÓÏ ‰ËÒڇ̈ËÓÌÌÓ„Ó ÛÔ‡‚ÎÂÌËfl . . . . . . . . . . . . . . . . . . 38
ÑÂÙÂÍÚӂ͇ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
íÂıÌ˘ÂÒÍÓ ӷÒÎÛÊË‚‡ÌË . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
íÂıÌ˘ÂÒÍË ı‡‡ÍÚÂËÒÚËÍË . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
E
N
G
L
I
S
H
Panasonic welcomes you to our ever growing family of electronic product owners. We know that this product
will bring you many hours of enjoyment. Our reputation is built on precise electronic and mechanical engineering, manufactured with carefully selected components and assembled by people who take pride in their work.
Once you discover the quality, reliability, and value we have built into this product, you too will be proud to be a
member of our family.
Precautions
When Driving
Keep the volume level low enough to be aware of road and traffic conditions.
When Washing Your Car
Do not expose the product, including the speakers and CDs, to water or excessive moisture. This could cause electrical shorts, fire, or other damage.
When Parked
Parking in direct sunlight can produce very high temperatures inside your car.
Give the interior a chance to cool down before switching the unit on.
Use the Proper Power Supply
This product is designed to operate with a 12 DC, negative ground battery system (the normal system in a North American car).
Disc Mechanism
Do not insert coins or any small objects. Keep screwdrivers and other metallic
objects away from the disc mechanism and disc.
For Installation
The product should be installed in a horizontal position with the front end up at
a convenient angle, but not more than 30˚.
Accessories
1. Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2. Supplied Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1set (page 12)
3. Removable face plate case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Note: The optional remote control is available from your local dealer (YEFX9992013A).
4
CQ-DP153WA
CQ-DP153WA
5
E
N
G
L
I
S
H
General
1
Turn the key in the ignition
until the accessory indicator
lights.
Power on: Press [SRC]
(POWER).
Power off: Press [SRC]
(POWER) again
and hold.
Note: If no operation takes place for more than 5 seconds
in audio mode (2 seconds in volume mode), the display
returns to the regular mode.
Power
Display Change
Press [DISP] (display) to switch to the clock display.
When the power is off:
Audio Mode
(Bass/Treble/Balance/Fader)
q Push [SEL] to select the audio mode.
Volume
Clock Setting
The 24-hour system is used for the clock.
Initial Time
No display
Clock display
Bass
"AdJ" is displayed when the clock is not adjusted.
push
Balance
Fader
[k TUNE], [l TUNE] (Hours, minutes)
Note: Please refer to next page when "AdJ" is displayed.
PU S
H SEL•MONO/L
CQ-DP153WA
OC
DN
AB
D•M
APM
TTUNE
UNE
TTRACK
RACK
Remote control sensor (➡ page 18)
PU S
H SEL•MONO/L
DN
AB
D•M
TUNE
TRACK
POWER
S
UL
CR
EM
C
SR
VO
MUTE
MU
TE
7
8
1
2
9
3
10
11
12
4
5
6
S
CAN
REP
LLOUD
OUD
VO
MUTE
7
8
1
2
9
3
10
11
12
4
5
6
w Turn [VOL] (volume) clockwise to increase volume,
CQ-DP153WA
OC
APM
UL
S
CR
POWER
EM
ACC
ON
and counterclockwise to decrease volume.
CLOCK
Bass:
PP
DDI S
IS
(default: 0dB)
S
CAN
LOUD
REP
CLOCK
PP
DDI S
IS
[DISP] (clock)
Hours
w Press and hold [DISP] (display) for more than 2
seconds.
(Hours blink.)
Adjustable range: –12 to +12dB (by 3dB step)
Treble:
(default: 0dB)
e Press [k TUNE] or [l TUNE].
Loudness
Volume
Turn the knob clockwise to increase volume,
and counterclockwise to decrease volume.
Press [LOUD] to enhance bass and treble
tones at low or medium volume.
(Hours set.)
Adjustable range: –12 to +12dB (by 3dB step)
Balance:
R (right speaker) or L (left speaker)
Minutes
r Press [DISP] (display).
LOUD
Loudness indicator
Press [LOUD] again to cancel.
Volume level (0 to 40)
Mute
Up
2
q Press [DISP] (clock).
Treble
Press [MUTE] to mute the sound completely.
(Minutes blink.)
Adjustable range: 1 to 15 (by 1 step)
Balance center
(default)
t Press [k TUNE] or [l TUNE].
(Minutes set.)
Fader:
F (front speaker) or R (rear speaker)
y Press [DISP] (display).
Down
(End.)
MUTE
Mute indicator
Press [MUTE] again or turn the knob clockwise
to cancel.
Adjustable range: 1 to 15 (by 1 step)
Fader center
(default)
Note: If the fader is set to front, the pre-amp. output (rear) is decreased.
Note: Press and hold [k TUNE] or [l TUNE] to
change numbers rapidly.
Time Reset
Press and hold [DISP] (display) for more than
2 seconds to activate the time setting mode to reset
the time.
Then, repeat steps e to y.
6
CQ-DP153WA
E
N
G
L
I
S
H
CQ-DP153WA
7
Caution: To ensure safety, never attempt to preset stations while you are driving.
Radio
Mode
Radio
Press [SRC] (source) to change to the radio mode.
CD player
(When a CD is inserted.)
Radio
3
FM Stereo indicator
ND
PU S
H SEL•MONO/L
CQ-DP153WA
OC
Press [DISP] (display) to switch to the clock display.
4
Frequency
Clock display
Press [BAND] to select a desired band. (➡ page 8)
AB
D•M
D•M
EM
7
8
1
2
9
10
11
12
4
5
6
3
S
CAN
LOUD
CLOCK
D
IS
P
ND
PU S
H SEL•MONO/L
BA
APM
D•M
TUNE
TRACK
POWER
EM
UL
Band
MONO indicator
LOCAL indicator
Preset
Station
CallingC
CQ-DP153WA
OC
AB
MUTE
REP
DN
UL
C
SR
VO
TTUNE
UNE
TTRACK
RACK
LOCAL
ST MONO
POWER
S
CR
Display Change
Up to 6 stations each can be saved in the FM1, FM2, FM3
and AM preset station memories.
Note: Existing saved stations are overwritten with new
stations after following this procedure.
E
N
G
L
I
S
H
q Band
DN
BA
APM
Preset Station Setting
S
CR
E
N
G
L
I
S
H
VO
MUTE
7
8
11
22
9
33
10
11
12
44
55
66
S
CAN
REP
LOUD
CLOCK
PP
Press the corresponding preset button
from [1] to [6] to tune
in a preset station.
DDI S
IS
Press [BAND] to change the band.
w Auto Preset Memory (APM)
Press and hold [BAND] (APM: auto preset memory) for more than 2 seconds.
• The 6 stations with good reception will be automatically sared in the memory under
preset buttons from [1] to [6].
• Once set, the preset stations are sequentially scanned for 5 seconds each.
Tuning
Manual
[l TUNE]: Higher frequency
Manual Preset Memory
[k TUNE]: Lower frequency
Use manual or seek tuning to find a station.
(➡ page 8)
Press and hold one of the preset buttons
from [1] to [6] until the display blinks once.
Seek Tuning
Press and hold ...
[l TUNE]: Higher frequency
[k TUNE]: Lower frequency
Tuning will automatically stop when the signals of the next broadcast station are received.
Mono/Local Selection (MONO/LOC)
MONO: Noise is significantly decreased when weak signals are received from an FM
broadcast station.
LOCAL: Only strong signals of stations are searched for in seek tuning, while at the
LOCAL OFF setting, relatively weak signals are also searched for.
Direct Memory
Your favorite FM/AM radio station can be memorized in the D·M button and you can call back radio stations just by
pressing the button whatever the current sound source is, even if the power is off.
• Press and hold [SEL] (MONO/LOC) more than 1 seconds to show the status,continuously hold to change the mode per 1 second. Then, release when at the desired point.
Default : FM 87.5 MHz
Recalling the Direct Memory
Press [D·M]. (Press again to cancel)
¡The direct memoried station is received.
D-M
Memorize
FM broadcasts
Select the station in Radio mode (➡ above)
Press and hold [D·M] until D·M indicator lights.
Regular mode
1 second
Press and hold ...
D-M
lights
Pressing continuously, frequency display will blink once and
new station will be overwritten on existing saved station.
8
D-M
CQ-DP153WA
blinks once
blinks once
1 second
MONO OFF / LOCAL OFF
(default)
1 second
MONO ON / LOCAL OFF
1 second
MONO ON / LOCAL ON
1 second
AM broadcasts
Regular mode
1 second
LOCAL OFF
1 second
(default)
LOCAL ON
MONO OFF / LOCAL ON
CQ-DP153WA
9
Disc Insert and Playback
Disc insert
[u] (eject)
Playback will start automatically after the player recognized the
loaded disc as an ordinary music CD. (When a CD-R or CD-RW
which has CD-DA formatted data as the same as an ordinary music
CD is loaded, this player recognizes it as an ordinary music CD.)
“LOAd” will be displayed until the disc is loaded.
Label side
Stop and Disc Eject
H SEL•MONO/L
Repeat playC2
Random playC3
CQ-DP153WA
OC
DN
ND
PU S
AB
BA
D•M
APM
TTUNE
UNE
TTRACK
RACK
Press [u] (eject) to stop CD play and eject the disc.
During disc ejection, “EJ” (eject) will be displayed.
UL
CR
EM
S
POWER
VO
MUTE
7
7
8
8
1
1
2
2
Listening to a CD
9
9
3
3
10
10
11
11
1122
4
4
5
5
6
6
S
CAN
LOUD
LOUD
REP
REP
CLOCK
D
IS
• Press a track number button from [1]
to [6].
The corresponding track starts playing.
• Press and hold a track number button
from [7] to [12] ([1] to [6]) for more
than 1 second.
The corresponding track starts playing.
P
Scan PlayC1
CD Player Mode (When a CD is in the player.)
Press [SRC] (source) to change to the CD play mode.
Playback will start automatically.
Radio
<Disc indicator>
• lights when the disc is loaded.
• Do not insert a disc when “DISC”
indicator lights.
CD player
(When a CD is inserted.)
<CD player display>
Track playing time
Track Selection
Track Search
[d TRACK]: Advance to the next track.
[s TRACK]: Back to the beginning of the current track.
Back to the previous track. (Press twice.)
Press and hold ...
[d TRACK]: Fast forward
[s TRACK]: Fast backward
Release to resume the regular play.
Track number
Scan playC1
H SEL•MONO/L
PU S
OC
DN
CQ-DP153WA
AB
D•M
APM
TUNE
TRACK
DISC
TRACK
POWER
EM
C
SR
UL
VO
MUTE
7
8
1
2
9
3
10
11
12
4
5
6
S
CAN
LOUD
REP
• Press and hold [LOUD] (SCAN),for more than 2
seconds.
The first 10 seconds of each track on the disc are
played in sequence.
• Press and hold [LOUD] (SCAN) again to cancel.
DISC
TRACK
blinks.
CLOCK
DDI
SPP
S
Repeat playC2
• Press [REP].
The current track is repeated.
• Press [REP] again to cancel.
Repeat indicator
REP
DISC
TRACK
Display Change
Press [DISP] (display) to switch to the clock display.
DISC
DISC
TRACK
playing time
10
CQ-DP153WA
Track
6
Direct Track Selection
Press [BAND] (y/ 5) to pause.
Press [BAND] (y/ 5) again to resume the
playback.
DISC
E
N
G
L
I
S
H
Caution:
• Only 5" (12 cm) CD, CD-DA data recorded CD-R and CD-RW discs are available for this unit.
• This unit does not support CD text display.
• This unit does not support MP3/WMA disc playback.
• Refer to page 23 about notes on CD-Rs/RWs.
• This unit is not designed for any 3" (8 cm) disc.
• If you insert an 3" (8 cm) disc and can not eject it, turn ACC of your car off once and turn it on again, then press
[u] (eject).
• Do not use irregular shaped discs.
• Do not use discs that have a seal or label attached.
• Do not insert foreign matter into the disc slot.
Pause
Notes:
• Do not insert a disc when “DISC” indicator lights.
• The power will be turned on automatically when a disc is loaded.
S
5
CD Player
CR
E
N
G
L
I
S
H
TRACK
Clock display
C3
Random play
• Press and hold [REP] (RANDOM) for more than 2
seconds.
All the tracks are played in random order.
• Press and hold [REP] (RANDOM) again to cancel.
lights.
R왘
DISC
TRACK
R 5 : Random indicator
CQ-DP153WA
11
E
N
G
L
I
S
H
7
Installation
Preparation
• Before installation, check the radio operation with
antenna and speakers.
• Disconnect the cable from the negative (–) battery terminal (see caution below).
• Unit should be installed in a horizontal position with
the front end up at a convenient angle, but not more
than 30°.
Installation Hardware
No.
Item
q
Mounting Collar
1
w
Hex. Nut (5 mmø)
1
Dashboard Installation
Installation Opening
The unit can be installed
53 mm
in any dashboard having
an opening as shown at
182 mm
right. The dashboard
should be 4.5 mm - 6 mm thick in order to be able to
support the unit.
Installation Precautions
This product should be installed by a professional
installer, if possible.
In case of difficulty, please consult your nearest authorized Panasonic Service Center.
1. This system is to be used only in a 12-volt, DC battery system (car) with negative ground.
2. Follow the electrical connections carefully (a page
16). Failure to do so may result in damage to the
unit.
3. Connect the power lead (red) after all other connections are made.
4. Be sure to connect the battery lead (yellow) to the
positive terminal (+) of the battery or fuse block
(BAT) terminal.
5. Insulate all exposed wires to prevent short circuiting.
6. Secure all loose wires after installing the unit.
7. Please carefully read the operating and installation
instructions of the respective equipment before connecting it to this unit.
12
CQ-DP153WA
Q’ty
e
Rear Ssupport Strap
r
Tapping Screw
(5 mmø × 16 mm)
1
t
Mounting Bolt (5 mmø)
1
y
Power Connector
1
u
Trim Plate
1
i
Dismounting Plate
2
30˚ or less
Caution: Do not disconnect the battery terminals of
a car with trip or navigational computer since all
user settings stored in memory will be lost.
Instead take extra care with installing the unit to
prevent shorts.
Diagram
1
E
N
G
L
I
S
H
Cautions:
• We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
• When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands and
fingers.
First complete the electrical connections, and
then check them for correctness.(a page 16)
The included Mounting Collar
q is designed specially for this
unit. Do not use it to attach any
other model.
1
8
Insert Mounting Collar q into the
dashboard, and bend the mounting
tabs out with a screwdriver.
The tabs to be bent vary depending on the car.
To securely install the unit, fully bend a number of the tabs so that there is no rattling.
Example:
Tab
q Mounting
Collar
y Power Connector
(a) Using the Rear Support Strap
r Tapping Screw
Fire Wall of Car
3 mmø
Mounting Holes
t Mounting Bolt
w Hex. Nut
2
e Rear Support Strap
t Mounting Bolt
Mounting Springs (C)
Establish the rear connection of the unit.
After fixing Mounting Bolt t and Power Connector
y, fix the rear of the unit to the car body by either
method (a) or (b) shown on the previous page.
q Mounting Collar
(b) Using the Rubber Cushion (option)
Rear Support Bracket
(Provided on the car)
Rubber Cushion
(Option)
t Mounting Bolt
Engage the both sides
Mounting Springs (C)
in the mounting holes
of the Mounting Collar
q firmly.
Mounting
Hole
3
4
Insert Trim Plate u.
After installation reconnect the negative (–) battery terminal.
Mounting Spring
q Mounting Collar
CQ-DP153WA
13
E
N
G
L
I
S
H
Installation (Continued)
Anti-Theft System
To Remove the Unit
This unit is equipped with a removable face plate. Removing this face plate makes the radio totally inoperable.
9
q Remove the removable face
Switch off the power of the unit.
Release button
plate.
q Press [
]. The
removable face plate
will be opened.
10
Contact
Place the Removable Face
Plate into Case
w
q Press
w
E
N
G
L
I
S
H
q Switch off the power of the unit.
w Remove the Removable Face Plate. (➡ page 14)
e Gently press the bottom of the case and open the
cover. Place the face plate into the case and take it
with you when you leave the car.
Removable Face Plate Case
Remove the Trim Plate u with a screwdriver.
u Trim Plate
Screwdriver
Install Removable Face Plate
e
q Slide the left side of the removable face plate in
place.
w Press the right end of the removable face plate
until “click” is heard.
q Insert the Dismounting Plate i along the
grooves on both sides of the main unit
until “click” is heard.
w Pull out the unit while pushing the plates
further inside.
qInsert
14
q
i Dismounting Plate
wPull out
r
Tab
Cutout
Insert the tab
end in the outer
groove.
“Click”
w
Caution:
• This face plate is not waterproof. Do not expose it to water or excessive moisture.
• Do not remove the face plate while driving your car.
• Do not place the face plate on the dashboard or nearby areas where the temperature rises to high level.
• Do not touch the contacts on the face plate or the main unit, since this may result in poor electrical contacts.
• If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.
Remove the unit pulling with both hands.
CQ-DP153WA
CQ-DP153WA
15
E
N
G
L
I
S
H
Electrical Connections
Speaker Connections
Caution:
• This product is designed to operate with a 12 V DC, negative ground battery system.
• To prevent damage to the unit, be sure to follow the connection diagram below.
• Strip about 5mm of the lead ends for connection (only non-ISO connector cords).
• Do not insert the power connector into the unit until the wiring is completed.
• Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all cables and
keep cable terminals free from touching any metal parts.
• Remember, if your car has a drive computer or a navigation computer, the data of its memory may be erased
when the battery terminals are disconnected.
11
Caution: Please follow the instructions given below. Failure to do so will cause damage to the unit and speakers.
12
<Right>
L +
-
R+
-
❐ Wiring Diagram
CQ-DP153WA
be something wrong with the unit. Consult your
nearest dealer for service.
y Power connector
BATTERY 15A
(Black)
(Yellow)
(Dark blue)
(Red)
Battery lead
To the car battery, continuous +12 V DC
Amp. relay control power lead
(Max. 500 mA)
This lead is for connection to the power
amplifier.
Note: This lead is used for power
control when an external power
amplifier is connected. The power
supply of a power amplifier will be
activated when turning on the power of
this unit.
(Dark blue/
white stripe)
Speaker lead
Left speaker
(Front)
16
CQ-DP153WA
(Gray/black
stripe)
(—)
(Gray)
(+)
Right speaker
(Front)
+
-
(Gray
w/black stripe)
+
-
L +
-
+
-
L +
-
+
+
-
-
Chassis
+
+
R -
-
+
R -
+
-
+
R -
+
+
-
-
Chassis
• Never connect the speaker cord to
the body of the car.
Power lead
To ACC power, +12 V DC
ACC
Note: The power antenna extends
automatically when the FM/AM
radio mode is selected.
(White/
(White)
black
stripe) (—) (+)
(Gray)
C If the fuse (rear panel) blows frequently, they may
Antenna
FRONT SP
+
-
L +
-
Fuse (15 A) C
L (White)
R (Red)
Motor antenna
relay control lead
(To motor antenna)
(Max. 500 mA)
This lead is not intended
for use with switch actuated
power antenna.
(White)
(White
w/black stripe)
• Use ungrounded speaker only.
• The maximum speaker input should be 45 W or more. (If used with the optional
power amplifier, the speaker input should be higher than the maximum amplifier
output.)
• The speaker impedance should be 4 - 8 Ω.
• This unit uses the BTCL circuit, so each speaker should be connected separately
using parallel vinyl insulated cords.
• The speaker cords and the power amplifier unit should be kept away (about 30 cm
apart) from the antenna and antenna extension cord.
<Wrong>
Preamp output connector (rear)
Ground lead
To a clean, bare metallic
part of car chassis.
E
N
G
L
I
S
H
• Do not use a 3-wire type speaker
system having a common earth
lead.
• Do not connect more than one
speaker to one set of speaker
leads.
Fuse
Use fuses of the same specified rating (15 A). Using different substitutes or fuses with higher ratings, or connecting
the unit directly without a fuse, could cause fire or damage to the unit.
If the fuse replacement fails, contact your nearest authorized Panasonic Service Center.
REAR SP
(Green/black
stripe)
(—)
(Green) (Violet/black
stripe)
(+)
Left speaker
(Rear)
(—)
(Violet)
(+)
Right speaker
(Rear)
CQ-DP153WA
17
Battery Installation
q Remove the battery holder.
Pull the battery holder by the position B while pushing
position A in the direction indicated by the arrow.
w Install the battery on the battery holder.
Place a battery in the holder with its “+” side facing up as
shown in the figure.
e Insert the battery holder.
Push the battery holder back into its original position.
Troubleshooting
Lithium battery
(included)
Check and take steps as described in the tables below.
If You Suspect Something Wrong
w
Position B
Immediately switch the power off.
Disconnect the power connector and check that there is neither
smoke nor heat from the unit before asking for repairs. Never try to
repair the unit by yourself because it is dangerous to do so.
E
N
G
L
I
S
H
Caution:
• Do not use the unit if it malfunctions or if
there is something wrong.
• Do not use the unit in irregular condition,
for example, without sound, or with smoke
or foul smell, which can cause ignition or
electric shock. Immediately stop using it
and call the store where you purchased it.
14
e
Battery holder
Position A
Battery Notes
Preliminary Steps
Back side
Troubleshooting Tips
❐ Common
q
Remove and dispose of an old battery immediately.
Battery Information:
• Battery type:
Panasonic lithium battery (CR2025) (included)
• Battery life:
Approximately 6 months with normal use (at room temperature)
Trouble
Cause/Step
Car’s ignnition switch is not on.
➡Turn your car’s ignition switch to ACC or ON.
Cables are not correctly connected.
➡Connect cables correctly.
Caution: Improper use of batteries may cause overheating, an explosion or ignition, resulting in injury or a fire.
Battery leakage may damage the unit.
• Do not disassemble or short the battery. Do not throw a battery into a fire.
• Keep batteries away from children to avoid the risk of accidents.
• Be careful to observe proper local disposal rules when you dispose of batteries.
Battery cable is not correctly connected.
➡Connect the battery cable to the terminal that is always active.
No power.
Accessory cable is not correctly connected.
➡Connect the accessory cable to your car’s ACC source.
Grounding wire is not correctly connected.
➡Connect the grounding wire to a metal part of the car.
Control Reference Guide
Buttons of the remote control function in the same way as the controls on the main unit of the reference page.
Point the remote control unit at the main unit’s sensor.
PU S
BA
ND
H SEL•MONO/L
Fuse is burnt out.
➡Call the store where you purchased the unit.
Mute is set to ON.
➡Set it to OFF.
OC
APM
(ATT)
POWER
E
13
Remote Control Unit Preparation
MODE
VOL
PRG
[BAND]
(Band)
(➡ page 8)
MUTE
[MUTE]
(Mute)
(➡ page 6)
[VOL] [j] [i]
(Volume )
C
PWR
SR
[PWR]
(Power)
[MODE]
(Mode (source))
(➡ page 8, 10)
7
UM
E
N
G
L
I
S
H
L
VO
MUTE
1
No sound.
Condensation (dew).
➡Wait for a while before use.
Noise.
BAND/DISC UP
Cables are not correctly connected.
➡Connect cables correctly.
Grounding wire is not correctly connected.
➡Connect the grounding wire to a metal part of the car.
TUNE
TRACK
[TUNE] [TRACK] [k] [l] [s] [d]
(Tune/track selection/track search)
(➡ page 8, 11)
Car Audio
18
CQ-DP153WA
CQ-DP153WA
19
E
N
G
L
I
S
H
Troubleshooting (Continued)
❐ Radio
Trouble
15
❐ CD (Continued)
Cause/Step
Trouble
The antenna ground lead dosen’t connect properly.
➡Connect the antenna ground lead properly.
Much noise in FM stereo
and monaural broadcasts.
Preset station is reset.
The radio antenna is not extended enough.
➡Extend fully the radio antenna.
The motor antenna relay control lead is not connected correctly.
➡If there is a motor antenna in the car, connect the motor antenna
relay control lead to the motor antenna lead that is installed in the
car correctly.
• Disc is dirty.
• Disc has scratches.
➡Clean disc, referring to the section on “Notes on CD/CD Media
(CD-R, CD-RW)”.
A disc that has data other than CD-DA type is loaded.
➡Discs that have CD-DA type data should be used.
➡The unit may not successfully play back a CD-R/RW that is made in
combination of writing software, a CD recorder (CD-R/RW drive) and
a disc which are incompatible one another. Refer to instructions for
the concerned devices for details.
Sound skips, bad sound
quality. (e.g. caused by
noise)
20
CQ-DP153WA
16
Sound skips due to
vibration.
Instable mounting.
➡Mount the unit securely with the mounting parts, referring to the section on installation.
Disc is not ejected.
• Disc is defective.
• Mechanical trouble.
➡Press [u] (eject). If normal operation is not restored, call the store
where you purchased the unit.
Time is counted but no
sound comes out.
The first track of a mix mode disc was reproduced. (Mix mode is a format in
which data except music is recorded on the first track and music data is
recorded on other than the first track in a session.)
➡Play back music data recorded on other than the first track.
Cause/Step
Disc is upside down.
➡Place disc in the correct direction with the label side up.
Disc is in the CD compartment but no sound is
made, or disc is ejected
automatically.
Cause/Step
Mounting angle is over 30˚.
➡Adjust mounting angle to less than 30˚.
Battery cable is not correctly connected.
➡Connect the battery cable to the terminal that is always active.
❐ CD
Trouble
E
N
G
L
I
S
H
❐ Sound Setting
Trouble
No sound from left,
right, front or rear
speakers.
Left and right sounds are
reversed in stereo listening.
Cause/Step
Left and right balance, or front and rear balance is off on one side.
➡Adjust balance/fader setting as appropriate.
Cables are not correctly connected.
➡Connect the cables correctly.
The right speaker wire is connected to the left speaker and the left speaker
wire to the right speaker.
➡Connect the speaker wires to the correct ones.
• Disc is dirty.
• Disc has scratches.
➡Clean disc, referring to the section on “Notes on CD/CD Media
(CD-R, CD-RW)”.
➡The unit may not successfully play back a CD-R/RW that is made in
combination of writing software, a CD recorder (CD-R/RW drive) and
a disc which are incompatible one another. Refer to instructions for
the concerned devices for details.
CQ-DP153WA
21
E
N
G
L
I
S
H
Maintenance
Troubleshooting (Continued)
❐ Remote Control Unit
Care of the Unit
Trouble
17
Cause/Step
Battery polarities are reversed.
➡Insert the battery correctly.
Buttons are invalid for
operation.
E
N
G
L
I
S
H
❐ Cleaning this Unit
18
❐ Caution on Cleaning
Use a dry, soft cloth to wipe.
Never use solvents such as benzine, thinner as
they may mar the surface of the unit.
Wrong battery.
➡Check the battery.
Battery has run down.
➡Replace the battery.
Notes on Discs
Remote control unit is in the wrong direction.
➡Direct the remote control unit at sensor on the front panel.
Error Display Messages
❐ CD
Display
Cause/Step
• Disc is dirty, or is upside down.
• A disc that has data other than CD-DA type is loaded.
➡Check the disc.
Do not play any ordinary music CDs with labels other than this
one.
How to hold the disc
• Do not touch the underside of the disc.
• Do not scratch the discs.
• Do not bend disc.
• When not in use, keep the disc in the case.
Label side
Do not use irregular shaped discs.
Disc has scratches.
➡Check the disc.
Do not leave discs on the following places:
• Direct sunlight
• Near car heaters
• Dirty, dusty and damp areas
• Seats and dashboards
No operation by some cause.
➡If normal operation is not restored, call the store where you purchased
the unit to ask for repairs.
Disc cleaning
Use a dry, soft cloth to wipe from the center outward.
Do not use irregular shaped discs.
<Right>
<Wrong>
Do not attach any seals or labels to your discs.
Do not write on the disc label in a heavy pen or ballpoint
pen stroke.
Notes on CD-Rs/RWs
• You may have trouble playing back some CD-R/RW discs recorded on CD recorders (CD-R/RW drives), either due to
their recording characteristics or dirt, fingerprints, scratches, etc. on the disc surface.
• CD-R/RW discs are less resistant to high temperatures and high humidity than ordinary music CDs. Leaving them
inside a car for extended periods may damage them and make playback impossible.
• The unit may not successfully play back a CD-R/RW that was made by the combination of writing software, a CD
recorder (CD-R/RW drive) and a disc if they are incompatible one another.
• This player cannot play the CD-R/RW discs if the session is not closed.
• This player cannot play the CD-R/RW discs which contains other than CD-DA data.
• Be sure to observe the instructions of CD-R/RW disc for handling it.
22
CQ-DP153WA
CQ-DP153WA
23
E
N
G
L
I
S
H
19
Specifications
❐ General
Power supply:
Current consumption:
Maximum power output:
Tone adjustment range:
Suitable speaker impedance:
Preamp output voltage:
Output impedance:
Dimensions (W×H×D):
Weight:
12 V DC (11 V–16 V), test voltage 14.4 V, negative ground
Less than 2.5 A (CD play mode; 0.5 W×4 channels)
45 W×4 channels at 1 kHz, volume control maximum
Bass: ±12 dB at 100 Hz
Treble: ±12 dB at 10 kHz
4–8 Ω
2.0 V (CD play mode; 1 kHz, 0 dB)
200 Ω
178×50×155 mm
1.4 kg
❐ FM Stereo Radio
Frequency range:
Usable sensitivity:
50 dB quieting sensitivity:
Frequency response:
Alternate channel selectivity:
Stereo separation:
Image response ratio:
IF response ratio:
Signal/noise ratio:
87.5 MHz–108.0 MHz
11.0 dBf. (1.25 µV, 75 Ω)
15.2 dBf. (1.6 µV, 75 Ω)
30 Hz–15 kHz (±3 dB)
75 dB
42 dB (1 kHz)
75 dB
100 dB
70 dB
❐ AM Radio
Frequency range:
Usable sensitivity:
531 kHz–1602 kHz
28 dBµV (25 µV, S/N 20 dB)
❐ CD Player
Sampling frequency:
DA converter:
Error correction system:
Pick-up type:
Light source:
Wave length:
Frequency response:
Signal/noise ratio:
Total harmonic distortion:
Wow and flutter:
Channel separation:
8 times oversampling
MASH·1 bit/4 DAC system
Panasonic super decoding algorithm
Astigma 3-beam
Semiconductor laser
780 nm
20 Hz–20 kHz (±1 dB)
96 dB
0.01 % (1 kHz)
Below measurable limits
75 dB
Note: Specifications and the design are subject to modification without notice due to improvements in technology.
24
CQ-DP153WA
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement