Panasonic CQFX323W Operating instructions

Panasonic CQFX323W Operating instructions
BAND
CQ-FW323W
PRG
OPEN
CASSETTE RECEIVER WITH CHANGER CONTROL
REVEL
VOL
DIMMER
TUNE
TRACK
CLOCK
DISP
super bright display with level meters
RE M O
L
SE
TE
MUTE
SOUR
CE PWR
MONO/LOC
RANDOM
DISC
1 MTL
NR 2
3 TPS
4
SCAN
5 B·S
REPEAT
REP 6
LOUD
Removable Full Front Cassette Player/Receiver
with CD Changer Control
可控制CD換片器的可拆式面板磁帶放音機/收音機
ë˙ÂÏ̇fl ͇ÒÒÂÚ̇fl χ„ÌËÚÓ· Ò ÙÓÌڇθÌÓÈ Á‡„ÛÁÍÓÈ Í‡ÒÒÂÚ,
Ô‰ÛÒχÚË‚‡˛˘‡fl ‚ÓÁÏÓÊÌÓÒÚ¸ ÛÔ‡‚ÎÂÌËfl CD-˜ẨÊÂÓÏ
APM
CQ-FX323W
Operating Instructions
操作說明書
àçëíêìäñàü èé ùäëèãìÄíÄñàà
Matsushita Electric Industrial Co., Ltd.
Web Site :http://www.panasonic.co.jp/global/
YEFM283944A ND1202-2043
Printed in China
¡Please read these instructions carefully before using this product and keep this manual for future reference.
¡使用本產品之前,請仔細閱讀這些說明書,並妥善保管本操作說明書以備將來使用。
¡èÂ‰ ̇˜‡ÎÓÏ ˝ÍÒÔÎÛ‡Ú‡ˆËË ‡ÔÔ‡‡Ú‡ ÔÓÒËÏ ÔÓ˜ËÚ‡Ú¸ ̇ÒÚÓfl˘Û˛ ËÌÒÚÛÍˆË˛ ‚ÌËχÚÂθÌÓ Ë ı‡ÌËÚ¸  ̇ ÔÓθÁÓ‚‡ÌËÂ
̇ ·Û‰Û˘ÂÂ.Ç˚·Ë‡ÈÚ Ê·ÂÏ˚È ‚‡ˇÌÚ.
E
N
G
L
I
S
H
中
國
Safety Information 安全須知
àÌÙÓχˆËfl ‰Îfl ·ÂÁÓÔ‡ÒÌÓÒÚË
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
è‰ÛÔÂʉÂÌËÂ:
óÚÓ·˚ ËÁ·Â„‡Ú¸ ËÒ͇ ÔÓʇ‡ ËÎË
˝ÎÂÍÚÓ¯Ó͇, Ó·Â„ËÚ ‡ÔÔ‡‡Ú ÓÚ
‚ÎËflÌËfl ‰Óʉfl ËÎË ‚·„Ë.
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHHOCK, AND ANNOYING INTERFERENCE, USE
ONLY THE INCLUDED COMPONENTS.
óÚÓ·˚ ËÁ·Â„‡Ú¸ ËÒ͇ ÔÓʇ‡ ËÎË
˝ÎÂÍÚÓ¯Ó͇, ËÒÔÓθÁÛÈÚ ÚÓθÍÓ
ÍÓÏÔÓÌÂÌÚ˚, ‚ıÓ‰fl˘Ë ‚ ÍÓÏÔÎÂÍÚ.
警告:
為避免火災或電擊的危險,切勿使本機遭受
雨淋或受潮。
語
çÄ êìëëäéå üáõäÖ
為防止火災或電擊的危險,和出現干擾,務
必要使用所附的部件。
“ìÒÚ‡ÌÓ‚ÎÂÌÌ˚È ÔÓËÁ‚Ó‰ËÚÂÎÂÏ ‚
ÔÓfl‰Í Ô.2 ÒÚ.5 î‰Â‡Î¸ÌÓ„Ó á‡ÍÓ̇
êî “é Á‡˘ËÚ Ô‡‚ ÔÓÚ·ËÚÂÎÂÈ” ÒÓÍ
ÒÎÛÊ·˚ ‰Îfl ‰‡ÌÌÓ„Ó ËÁ‰ÂÎËfl ‡‚ÂÌ 7
„Ó‰‡Ï Ò ‰‡Ú˚ ÔÓËÁ‚Ó‰ÒÚ‚‡ ÔË ÛÒÎÓ‚ËË,
˜ÚÓ ËÁ‰ÂÎË ËÒÔÓθÁÛÂÚÒfl ‚ ÒÚÓ„ÓÏ
ÒÓÓÚ‚ÂÚÒÚ‚ËÂ Ò Ì‡ÒÚÓfl˘ÂÈ ËÌÒÚÛ͈ËÂÈ
ÔÓ ˝ÍÒÔÎÛ‡Ú‡ˆËË Ë ÔËÏÂÌËÏ˚ÏË
ÚÂıÌ˘ÂÒÍËÏË Òڇ̉‡Ú‡ÏË.”
安全注意事項及緊急處理方法
請務必遵守
為避免對使用者或其他人員造成傷害或財產損失,現將須務必嚴守事項說明如下﹕
■ 對無視所示內容,造成操作錯誤而產生的危害及損害程度按下述表記加以區分、說明。
有此表記欄內的內容表示“有造成死亡或重傷等的可能性”
。
有此表記欄內的內容表示“有造成傷害的可能性或僅有造成財產損失
的可能性”
。
■ 對須務必嚴守事項的種類以下列圖示加以區分、說明。
(下列圖示僅為圖示之一例。)
中
國
此圖示表示不得進行的“禁止”事項。
語
此圖示表示必須進行的“強制”事項。
司機在開車時不得進行操作
不得將確保安全的部件用於本機
的安裝及地線配線等
如開車時進行操作的話,會因
如果使用方向盤、制動器等保
對前方注意不夠而有造成交通
安部件的螺栓、螺母、小螺絲
事故的危險。
的話,有造成故障的危險。應
要將車停靠在安全之處後再進
按說明,使用所附的部件。
行操作。
緊急處理方法
為防止使用者及其他人之危害及生命財產的損失,如有上述異常發生時,請立即關閉電源停止使
用並就近前往保養廠或汽車音響經銷商尋求協助。
2
CQ-FX323W
CQ-FX323W
3
各部名稱及其功能
主機
安裝及配線應請專門的技術人員
進行
本機的安裝及配線需要專門的技術
和經驗。
為確保安全,請委託經銷處進行安
裝及配線。
[OPEN] 打開面板
[BAND](PRG)
¡BAND選擇
¡換面播放
[VOL]
¡音量 } {
應請專門的技術人員更換保險絲
[LEVEL](DIMMER)
¡電平表
¡弱光
[Tune], [Track], [2], [1], [}], [{]
¡調諧頻率
¡音軌選擇
¡快退和快進
如果使用非指定的保險絲的話,有
冒煙、起火或造成故障的危險。應
請經銷處來修理或更換保險絲。
BAN
CQ-FW323W
D
PRG
OPEN
CASSETTE RECEIVER WITH CHANGER CONTROL
LEVEL
中
國
語
切勿進行解體或改裝
嚴禁將本機解體或進行改裝,或者
將電源線的鎧裝切開與其他電源連
接,這會有冒煙、起火、觸電或造
成故障的危險。
當出現故障及異常時不要繼續使用
當在不能發出聲音、冒煙、出現異
味等異常情況下繼續使用的話,有
起火及觸電的危險。應立即停止使
用並與經銷處取得聯系。
切勿使異物進入本機內部
如果金屬物品或易燃物等異物進入
本機內部的話,可因短路及絕緣不
良而造成發熱、起火及觸電並有出
現故障的危險。
切勿將手或手指放到本機的動作部
位切勿將異物置於光碟插入口內
將手或手指放到本機的動作部位或
將異物置於光碟插入口內的話,有
造成外傷或故障的危險。
對嬰幼兒尤其要注意。
4
CQ-FX323W
VOL
進行配線作業時,務必要將電池的
@ 極接線柱拆開
DISP
L
SE
如果不按說明正確地進行配線的
話,將會因短路而有造成觸電、外
傷以及起火或故障的危險。
R
SOUR
E
E M OT
MUTE
super bright display with level meters
RANDOM
DISC
1 MTL
CE PW
R MONO/LOC
NR 2
3 TPS
4
SCAN
5 B·S
REPEAT
REP 6
LOUD
中
國
APM
語
電台預置鍵([1]至[6])
¡電台預置記憶
¡隨機(音軌)
¡掃描(光盤,音軌)
¡重複(音軌)
供帶有直流[email protected]接地的車輛使用
本機僅供帶有直流12 [email protected] 接地的
車輛使用。大型卡車以及寒冷地帶
使用規格的柴油車等 (直流24 V車)
不能使用本機,否則會出現短路而
有造成起火或故障的危險。
DIMMER
CLOCK
TUNE
TRACK
[SEL](選擇)
¡選擇音頻模式
[¡](MUTE)(MONO/LOC)
¡靜音
¡單聲道/局部選擇
[DISP](顯示器)
¡時鐘設定
¡顯示改變
[APM](自動電台預置記憶)
¡自動電台預置記憶
[LOUD](響度)
¡響度
[SOURCE][PWR](電源)
¡電源開/關
¡選擇音源
切勿使本機淋上或浸水
如有水進入本機的話,將會因短路
及絕緣不良而有造成發熱、起火及
觸電或故障的危險。洗車或下雨
時,要注意不要使本機淋上水。
磁帶插入口
u退出鍵 (EJECT)
要調節為適當的音量使用
當在聽不到車外或周圍聲音的狀態
下開車時,有造成事故的危險。
CQ-FX323W
5
E
N
G
L
I
S
H
ENGLISH.................................................... 6-25
CHINESE........................................................ 26-45
RUSSIAN........................................................ 46-65
Panasonic welcomes you to their constantly growing family of electronic products owners.
We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and assembled by people who are proud of the reputation their
work has built for our company. We know this product will bring you many hours of enjoyment, and after
you discover the quality, value and reliability we have built into it, you too will be proud to be a member of
our family.
1
E
N
G
L
I
S
H
2
Precautions
Contents
For your driving safety, keep the volume level low enough to be aware of road
and traffic conditions.
Car Washing
Page
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Precaution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Accessaries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Remote Control (Option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Power and Sound Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Cassette Tape Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
CD Changer Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Anti-Theft System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Electrical Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Speaker Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Volume Level
To avoid electrical shorts which may cause fire, or other damage, do not
expose this Product (including the speakers and tape) to water or excessive
moisture.
Car Ventilation
If your car is parked for several hours in direct sun-light, the temperature
inside the car may become very high. It is advisable to drive the car and give
the interior a chance to cool down before switching the unit on.
Power Supply
This Product is designed to be used in a car having a 12-Volt negative ground
battery system.
Tape Mechanism
Keep magnets, screwdrivers and other metallic objects away from the tape
mechanism and tape head.
Service
This Product is made of precision parts. Do not attempt to disassemble or
adjust any parts. For repair, please consult your nearest authorized Service
Center.
Note: The preset memory is cleared to return to the original factory setting
when the power connector or battery is disconnected.
Accessaries
¡Operating Instructions.................................................................................1
¡Supplied Hardware............................................................1set (Page a16)
¡Removable Face Plate case.......................................................................1
Remote Control (Option)
(ATT)
Power
(ATT)
PWR
Mode (Source)
MUTE
VOL
Band, Stop,
BAND/DISC UP
Disc up
MUTE
MODE
PRG
Volume Control
BAND/DISC UP
TUNE
TRACK
Car Audio
Car Audio
Tune, Track Search,
Fast Forward/Rewind
Notes: Optional remote controller is available from your local dealer. (CA-RC61EX).
6
CQ-FX323W
CQ-FX421/FX321N
CQ-FX323W
7
E
N
G
L
I
S
H
3
Power and Sound Controls
Power (PWR)
Note: If no operation takes place for more than 5 seconds in audio mode
(2 seconds in Volume mode), the display return to Regular Mode.
Note: When the power is switched on for the
first time, a demonstration message appears on
the display.
Turn the key in the ignition until the accessory
indicator lights.
Power on : Press [SOURCE] (PWR).
Power off : Press and hold [SOURCE]
(PWR) again.
Audio Mode
q Press [SEL](select) to select the audio mode.
Scrolling....
Volume
Bass
(–12 to +12 dB)(by 3 dB step)
(default: 0 dB)
Treble
(–12 to +12 dB)(by 3 dB step)
(default: 0 dB)
PRG
D
BAN
OPEN
CASSETTE RECEIVER WITH CHANGER CONTROL
DIMMER
TUNE
TRACK
CLOCK
DISP
RE M O
L
SE
4
Regular Mode
LEVEL
VOL
w Press [}VOL] or [{VOL] to change each level.
To cancel this display, press [DISP] (Display).
Level Meter (Pattern 1)
CQ-FX323W
E
N
G
L
I
S
H
SOUR
TE
MUTE
super bright display with level meters
RANDOM
DISC
1 MTL
CE PW
R MONO/LOC
NR 2
3 TPS
4
SCAN
5 B·S
(Left / Right: 1 to 15)
Balance
REPEAT
REP 6
LOUD
APM
(CNT:center)(default)
(Front / Rear: 1 to 15)
Fader
Remote control sensor (REMOTE)
for an optional remote control
(CNT:center)(default)
Volume (VOL)
[}VOL] : Up
[{VOL] : Down
Press and hold for rapid adjustment.
LOUD indicator
MUTE
D
BAN
CQ-FX323W
PRG
OPEN
CASSETTE RECEIVER WITH CHANGER CONTROL
Volume Level (0 to 40)
LEVEL
VOL
DIMMER
CLOCK
TUNE
TRACK
DISP
L
SE
RE M O
SOUR
TE
MUTE
super bright display with level meters
RANDOM
DISC
1 MTL
CE PW
R MONO/LOC
NR 2
3 TPS
4
SCAN
5 B·S
REPEAT
REP 6
LOUD
APM
Display Controls
8
Level Meter
Dimmer
Mute
Loudness
Press[LEVEL] to change each setting.
Select your desired setting.
(Default:Pattern 1)
Press and hold [LEVEL](DIMMER) for more than 2
seconds to change dimmer level setting as follows
(Default:Brighter)
Press [MUTE] to mute the sound completely.
Press [MUTE] again to cancel.
Press [LOUD] to enhance bass and treble tones at
low or medium volume.
Press [LOUD] again to cancel.
Pattern 1
Pattern 2
Pattern 3
Pattern off
Pattern 5
Pattern 4
CQ-FX323W
CQ-FX421/FX321N
Dimmer 3
(Brighter)
Dimmer 2
(Center)
Dimmer 1
(Darker)
MUTE
LOUD
CQ-FX323W
9
E
N
G
L
I
S
H
5
Radio
Clock
Clock Setting
How to listen to the radio
q Mode Selection (SOURCE)
6
Radio
Press [SOURCE] to change to the radio mode.
[BAND]
D
BAN
CQ-FX323W
Cassette Tape Player
(When a tape is inserted)
PRG
OPEN
CASSETTE RECEIVER WITH CHANGER CONTROL
LEVEL
VOL
DIMMER
CLOCK
TUNE
TRACK
[}TUNE]
DISP
RE M O
CD changer control
(When a CD Changer is connected)
[{TUNE]
L
SE
SOUR
TE
super bright display with level meters
RANDOM
DISC
MUTE
1 MTL
CE PW
R MONO/LOC
NR 2
3 TPS
4
SCAN
5
REPEAT
B·S REP 6
LOUD
Press [BAND] to change the
bands.
APM
[DISP]
(CLOCK)
[APM]
[1] to [6] (Preset buttons)
w Band
Preset Memory
Initial Time
Up to 6 stations each can be stored in the FM1, FM2, FM3
and AM preset band selections.
q Press [DISP](CLOCK).
“ADJUST” appears on the display
q Band
Band
Press [BAND] to select a desired band. (a Page 10)
FM1
w Press and hold [DISP](CLOCK) for more than 2
seconds.“12” blinks,and the time setting mode is
activated.
PRG
D
BAN
CQ-FX323W
OPEN
CASSETTE RECEIVER WITH CHANGER CONTROL
LEVEL
FM2
VOL
DIMMER
CLOCK
TUNE
TRACK
DISP
FM3
RE M O
L
SE
AM
SOUR
TE
super bright display with level meters
RANDOM
DISC
MUTE
1 MTL
CE PW
R MONO/LOC
NR 2
3 TPS
SCAN
4
5 B·S
REPEAT
REP 6
LOUD
APM
Stereo indicator lights
when FM stereo broadcasting is received
e Manual Tuning
Press
[}TUNE] : Higher frequency.
[{TUNE] : Lower frequency.
Seek Tuning
Press and hold
[}TUNE] : Higher frequency.
[{TUNE] : Lower frequency.
Tuning will automatically stop when
the signals of the next broadcast
station are received.
r Mono/Local Selection (MONO/LOC)
MONO : Noise is significantly decreased when weak signals are received
from an FM broadcast station.
LOCAL : Only strong signals of stations are detected in seek tuning, while at
the LOCAL OFF setting, relatively weak signals are also detected.
FM broadcasts
AM broadcast
Press and hold [¡] (MONO/LOC) to
change the mode.Release when at the
desired point.
Press and hold [¡] (MONO/LOC)
to switch LOCAL mode on and off.
MONO OFF / LOCAL OFF (Default)
LOCAL OFF (Default)
LOCAL ON
MONO ON / LOCAL ON
MONO OFF / LOCAL ON
LOCAL
MONO
MONO/LOCAL indicator
CQ-FX323W
CQ-FX421/FX321N
w Manual Preset Memory
q Use manual or seek tuning to find a station.
(a page 10)
w Press and hold one of the preset buttons [1] to [6]
until the display blinks once.
12:00
e Press [}TUNE] or [{TUNE] to set the hour.
10:00
r Press [DISP](CLOCK) to proceed with the
minutes setting.
Preset Number
10:00
t Press [}TUNE] or [{TUNE] to set the minute.
Auto Preset Memory (APM)
Press [APM].
¡The 6 stations,with good reception will be automatically saved in the memory under preset 1 to 6.
¡Once set, the preset stations are sequentially
scanned for 5 seconds each.
e Tuning in a Preset Station
Press the corresponding preset button [1] to [6] to
tune in a preset station.
MONO ON / LOCAL OFF
10
E
N
G
L
I
S
H
Note: You can change the memory presetting by
repeating the above procedure.
Caution: To ensure safety, never attempt to preset
stations while you are driving.
10:35
y Once the time has been set, press [DISP](CLOCK).
10:35
Notes:
¡The clock system is 12-hours.
¡Press [}TUNE] or [{TUNE] for more than 0.5
seconds to change numbers on the display in
sequence.
¡The [DISP](CLOCK) button will not work while the
CD Changer is set to the scan play mode.Cancel the
scan play mode before pressing [DISP](CLOCK).
CQ-FX323W
11
Cassette Tape Player
E
N
G
L
I
S
H
Caution: Do not insert a tape when
lights because a tape is already inserted.
7
Tape Insert and Playback
q Open the front panel.
w Insert a cassette tape.
e Close the front panel manually.
Play back will start automatically.
(tape indicator)
Open
E
N
G
L
I
S
H
Listening to a Cassette Tape
Mode Selection
Press [SOURCE] to change to Cassette tape play
mode.
OPEN
Stop and Tape Eject
q Open the front panel.
w Press [u] to stop tape play and eject the cassette tape.
e Close the front panel manually.
[u] Eject
MD
CD
Exposed tape
end(Open end)
BAN
CQ-FX323W
Source
LEVEL
1
8
Tape indicator lights when
a tape is inserted.
D
PRG
OPEN
CASSETTE RECEIVER WITH CHANGER CONTROL
LEVEL
V OL
Radio
DIMMER
CLOCK
TUNE
TRACK
DISP
Cassette Tape Player
(When a Tape is inserted)
CD Changer control
(When a CD Changer is connected)
Play Side Change
Press [BAND] (PRG) to reverse.
RE M O
L
SE
SOUR
TE
MUTE
super bright display with level meters
RANDOM
DISC
1 MTL
CE PW
R MONO/LOC
NR 2
3 TPS
4
SCAN
5 B·S
REPEAT
REP 6
LOUD
APM
Metal Tape Mode
Repeat Play
¡Press [1](MTL) when playing metal or chromium
dioxide (CrO2) tapes.
¡Press [1](MTL) again to cancel.
¡Press [6](REP) to repeat the current
program.
¡Press [6](REP) again to cancel.
MTL
REP
Top Side Playing
Cautions:
¡When the front panel is opened, do not force it down and
do not put anything on it since these may result in damage
to the unit.
¡When ejecting a cassette tape, do not close the front panel
until the cassette tape is ejected and removed from the
cassette slot completely.
¡Do not pinch your finger or hand in the front panel.
¡Do not insert foreign matters into the tape slot.
Note: To maintain your cassette player in top condition,
avoid using tapes that are longer than 90 minutes (C-90).
Bottom Side Playing
Dolby Noise Reduction
¡Press [2](NR) to set the Dolby B NR mode.
¡Press [2](NR) again to cancel.
¡Press [5](B • S) to skip unrecorded portions
longer than 15 seconds on the tape.
¡Press [5](B • S) again to cancel.
B-SKIP
Rewind and Fast Forward
Press [2] or [1] to activate fast forward or
rewind of the tape.
Note: Set the Dolby B NR mode when playing back
a tape recorded with Dolby B Noise Reduction.
Note: When repeat is on, the blank skip does
not work because the repeat has priority over
the blank skip.
Tape Program Search (TPS) Operation
q Press [3](TPS) to activate the Tape Program Search mode.
Tape Slack:
Use a pencil or similar object to take up the slack as shown. If
a loose tape is used, this may result in the tape becoming tangled in the rotating parts of the unit.
[1]:Rewind (To cancel,press [2])
[2]:Fast forward (To cancel,press [1])
Pencil
Exposed tape
end (Open end)
Do not touch or
pull out the tape.
Ex1.To select the last program,
press [3] (TPS) and [1] twice.
Top Side Play
Bottom Side Play
CQ-FX323W
Blank Skip
B
Notes on Cassette Tape
12
Note: Playing Normal tapes in MTL mode causes
high frequency imbalance, which affects tone quality.
w To select a desired program, press [2] or [1]
corresponding times to go forward (up to 9)
or backward (up to 8).
(Rewind:)
(Fast forward:)
8t
0 1
s9
Ex2.To select the next program,
press [3] (TPS) and [2].
[1]:Fast forward (To cancel,press [2])
[2]:Rewind (To cancel,press [1])
Press [BAND] (PRG) to resume the tape play.
e Press [3](TPS) again to cancel.
Note: The TPS mode may not work correctly in the following cases. This, however, does not mean that the unit is
defective.
¡There is an interval less than 3 seconds or having a high level of noise or hum between programs.
¡There is particularly low-level passage during the program.
CQ-FX323W
13
E
N
G
L
I
S
H
9
CD Changer Control
E
N
G
L
I
S
H
Note: The CD Changer functions are designed for an optional CD Changer unit.
How to listen to CDs
Playing Mode
10
Mode Selection
Display Change
Press [SOURCE] to change to the CD Changer mode.
Press [DISP] to switch the clock display.
Press again to resume.
Source
PRG
OPEN
CASSETTE RECEIVER WITH CHANGER CONTROL
LEVEL
VOL
Disc/Track/Play Time
Radio
D
BAN
CQ-FX323W
DIMMER
CLOCK
TUNE
TRACK
DISP
super bright display with level meters
RE M O
L
SE
Cassette Tape Player
(When a Tape is inserted)
CD Changer control
(When a CD Changer is connected)
SOUR
TE
MUTE
1 MTL
CE PW
R MONO/LOC
RANDOM
DISC
NR 2
3 TPS
4
SCAN
5 B·S
REPEAT
REP 6
APM
LOUD
Clock display
Random
(a page 11)
Track
¡Press [4] (RANDOM).
All tracks on all discs in the magazine are played
in random order.
¡Press again to cancel.
Track
¡Press [5] (SCAN).
The first 10 seconds of each track on the disc
are played in sequence.
¡Press again to cancel
RAND
Track Number
Disc Number
D
BAN
CQ-FX323W
Playing Time
PRG
OPEN
CASSETTE RECEIVER WITH CHANGER CONTROL
LEVEL
VOL
Scan
DIMMER
CLOCK
TUNE
TRACK
Disc
DISP
RE M O
L
SE
SOUR
TE
MUTE
super bright display with level meters
RANDOM
DISC
1 MTL
CE PW
R
NR 2
3 TPS
4
SCAN
5
REPEAT
B·S REP 6
LOUD
APM
MONO/LOC
Lights when a magazine is
loaded in the changer.
Repeat
Track
¡Press and hold [5] (SCAN) for more than 2 seconds.
The first track of all discs in the magazines is
played for 10 seconds each.
¡Press again to cancel.
¡Press [6] (REP).
The current track is repeated.
¡Press again to cancel
REP
Error Display Messages
Track Selection
Disc Selection
[1] ({DISC): Previous disc.
Press
[2] (}DISC): Next disc.
[f(f|) TRACK] : Advance to the next track.
[a(|a) TRACK] : Back to beginning of the current
track.
Back to previous track. (Press twice)
Fast forward/Fast reverse
Press and hold
[f TRACK] : Fast forward
[a TRACK] : Fast reverse
Release to resume the regular
CD Changer play.
14
CQ-FX323W
CDC
CDC
CDC
E1
Appears on the display when the compact disc is dirty or inverted.
Select the next available compact disc.
E2
Appears on the display when compact disc is scratched.
Select the next available compact disc.
E3
Appears on the display when the unit stops operating for some reason.
Press the reset switch on the CD Changer (option).
c
DISC No.
c
DISC No.
CDC 0000
Appears on the display when there is no disc in the magazine.
CQ-FX323W
15
E
N
G
L
I
S
H
11
Installation
Preparation
¡Before installation, check the radio operation with antenna
and speakers.
¡Disconnect the cable from the negative (–) battery terminal
(see caution below).
¡Unit should be installed in a horizontal position with the front
end up at a convenient angle, but not more than 30°.
30° or less
Supplied Hardware
No.
q
Item
Diagram
1
Mounting Collar
w
Mounting Bolt (5 mmø)
1
e
Tapping Screw
(5 mmø x 16 mm)
1
r
Rear Support Strap
1
t
Hex. Nut (5 mmø)
1
y
Power Connector
1
u
Trim Plate
1
Caution: Do not disconnect the battery terminals of a car
with trip or navigational computer since all user settings
stored in memory will be lost. Instead take extra care with
installing the unit to prevent shorts.
Dashboard Installation
53 mm
Installation Opening
The unit can be installed in
182 mm
any dashboard having an
opening as shown at right.
The dashboard should be
4.5 mm - 6 mm thick in order to be able to support the unit.
Installation Precautions
This product should be installed by a professional installer, if
possible.
In case of difficulty, please consult your shop when you purchased this unit.
1. This system is to be used only in a 12-volt, DC battery system (car) with negative ground.
2. Follow the electrical connections carefully (a Page 20).
Failure to do so may result in damage to the unit.
3. Connect the power lead (red) after all other connections are
made.
4. Be sure to connect the battery lead (yellow) to the positive
terminal (+) of the battery or fuse block (BAT) terminal.
5. Insulate all exposed wires to prevent short circuiting.
6. Secure all loose wires after installing the unit.
7. Please carefully read the operating and installation instructions of the respective equipment before connecting it to this
unit.
Q’ty
Cautions:
¡We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
¡When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands and
fingers.
First complete the electrical connections, and
then check them for correctness.(a Page 20)
The included Mounting Collar q is
designed specially for this unit .
Do not use it to attach any other models.
1
E
N
G
L
I
S
H
12
1
Insert Mounting Collar q into the
dashboard, and bend the mounting
tabs out with a screwdriver.
Lock Lever (C)
Power Connector y
(a) Using the Rear Support Strap
eTapping Screw
Mounting Tabs
Fire Wall of the Car
3 mmø
Mounting Bolt w
tHex. Nut
2
rRear Support Strap
wMounting Bolt
qMounting Collar
3
4
(b) Using the Rubber Cushion (Option)
Rear Support Bracket
(Provided on the car)
Rubber Cushion
(Option)
wMounting Bolt
Establish the rear connections of the
unit.
After fixing Mounting Bolt w and Power
Connector y, Establish the rear connections of
the unit to the car body by either method (a) or (b)
shown on the previous page.
Insert Trim Plate u.
After installation reconnect the
negative (–) battery terminal.
Make sure that the lock lever
(C) is flush with the mounting
collar (not projecting outward).
qMounting Collar
Lock Lever
16
CQ-FX323W
CQ-FX323W
17
E
N
G
L
I
S
H
Installation (continued)
To Remove the Unit
q Remove the removable
face plate.
q Press [OPEN]. The
removable face plate
will be opened.
w Push the face plate to
either the right or left.
e Pull it out toward you.
13
Anti-Theft System
This unit is equipped with a removable face plate. Removing
this face plate makes the radio totally inoperable.
Contact
w Push
q Open
Open
e Pull out
LEVEL
w
uTrim Plate
Screwdriver
1
2
e Pull out the unit while pushing down the lock
lever with a screwdriver.
Removable Face Plate Case
14
1
q Switch off the power of the unit.
w Remove the removable face plate. (a Page 18)
OPEN
Remove the trim plate u with a screwdriver.
Place Removable Face Plate
into Case
E
N
G
L
I
S
H
Lock Lever
Screwdriver
e Gently press the bottom of the case and open the cover.
Place the face plate into the case and take it with you
when you leave the car.
Cautions:
¡This face plate is not water-proof. Do not expose it to water or excessive moisture.
¡Do not remove the face plate while driving your car.
¡Do not place the face plate on the dashboard or nearby areas where the temperature rises to high levels.
Install Removable Face Plate
q Fit the face plate with its right or left hole on one of the
pins provided on the main unit.
w Fit the other hole on the other pin applying slight pressure.
e Move the face plate up and down a few times to make
sure it is secure. Then close the front panel and press
down the right side of the face plate until it clicks into
place.
Security Indicator
The security indicator blinks when the removable face plate
is removed from the unit.
r Remove the unit pulling with both hands.
Press and hold [SEL] for more than 2seconds when the
power is on. "LED On" is displayed,and the security indicator
turns on. (Default: LED On)
Security Indicator
Display
Cautions:
¡Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical contacts.
¡If dirt or other foreign substances get on the contacts, wipe them off with clean and dry cloth.
¡Do not apply a strong downward force onto the face plate and do not put anything on it while it is open, or it might be
damaged.
18
CQ-FX323W
Security Indicator
Blinks
OFF
Caution: When you want to remove the unit,the
security indicator functions can be canceled by following procedure.
¡Install the removable face plate.
¡Disconnect the power connector for more than 3
minutes and then reconnect it.
CQ-FX323W
19
E
N
G
L
I
S
H
Electrical Connections
Cable Wiring Diagram
Example : Connection with CD Changer CX-DP88N (Option).
15
Changer Control DIN Cord
CD Changer
(L) (White)
CX-DP88N
CH•C-IN
(option)
(R) (Red)
RCA Cord
CD Changer
Control Connector
Ground Lead
To a clean, bare
metallic part of
the car chassis
Preamp out Connector
(Pre-out) Front
Antenna
Cassette Receiver
CQ-FX323W
Preamp out Connector
(Pre-out) Rear
L(White)
Extension Cord
(DIN/BATT/RCA/GND)
R(Red)
(Supplied for an optional
CD Changer)
Stereo power
amplifier
(L) (White)
yPower
Connector
(Rear)
(Yellow)
Fuse (3A)
Battery Lead
To the car battery,
continuous +12V DC
Optional
RCA cord (Audio)
(R) (Red)
(Black)
Stereo power
amplifier
(L) (White)
Cautions:
¡This unit is designed for use in a car having a
12-volt negative ground battery system.
¡To prevent damage to the unit, be sure to follow
the connection diagram below.
¡Strip about 5 mm of the lead ends for connection.
¡Do not insert the power connector into the unit
until the wiring is completed.
¡Be sure to insulate any exposed wires to prevent short circuiting with the car chassis.
Bundle all cables, and prevent cable terminals
from touching any metal parts.
E
N
G
L
I
S
H
16
1
¡This unit can be connected to an optional CD
Changer (CX-DP9061EN, CX-DP88N, CXDP1212N, CX-DP801EN, CX-DP880N) and
optional extension cord.
¡For details consult your shop where you purchased this unit.
¡For connection to a CD Changer, refer to the
operating instructions of the CD Changer (CXDP9061EN, CX-DP88N, CX-DP1212N, CXDP801EN, CX-DP880N).
(Front)
(R) (Red)
Speakers
Rear Left +
For two speakers
Insulate unused speaker cords
with vinyl tape
Keep the vinyl cap covered
for insulation
if this is not used.
(Green)
Power Lead (ACC or IGN) (Red)
To ACC power, +12 V DC
(Black)
Rear Left –
Front Left +
(Green w/black stripe)
ACC
(White)
(Red)
Front Left –
Resistor (1kΩ)
(White w/black stripe)
Front Right +
(Gray)
Front Right –
Rear Right +
Rear Right –
20
CQ-FX323W
Ground Lead (Black)
To a clean, bare metallic part of the car chassis
(Dark Blue)
(Gray w/black stripe)
(Violet)
Fuse (15A)
BATTERY 15A
Motor Antenna Relay Control (Dark blue)
(To the auto antenna control power load of the
car.)(Max.500 mA)
This lead is not intended for use with a switch actuated Power antenna.
Amp. Relay Control Power Lead
This lead is for connection to a Panasonic power
amplifier.
Battery Lead (Yellow)
To the car battery, continuous +12 V DC
(Yellow)
(Violet w/black stripe)
CQ-FX323W
21
E
N
G
L
I
S
H
Speaker Connections
Troubleshooting
E
N
G
L
I
S
H
Preliminary Steps
Caution: Please follow the instructions given below. Failure to do so will cause damage to the unit and speakers.
Check and tape steps as described in the tables below.
17
18
<Right>
L +
-
R+
-
(White)
+
-
(White
w/black stripe)
(Gray)
+
-
(Gray
w/black stripe)
If You Suspect Something is wrong.
¡Use ungrounded speaker only.
¡The maximum speaker input should be 45 W or more. (If used with
the optional power amplifier, the speaker input should be higher than
the maximum amplifier output.)
¡The speaker impedance should be 4 - 8 Ω.
¡This unit uses the BTCL circuit, so each speaker should be connected
separately using parallel vinyl insulated cords.
¡The speaker cords and the power amplifier unit should be kept away
(about 30 cm apart) from the antenna and antenna extension cord.
Immediately switch the power off.
Disconnect the power connector and check that there is neither smoke nor heat from the unit before asking for repairs.
Never try to repair the unit yourself because it is dangerous to do so.
Cautions:
¡Do not use the unit if malfunctions or something is wrong.
¡Do not use the unit in abnormal condition,for example,for example,without sound,or with smoke or foul smell.
This can cause ignition or electric shock.Immediately stop using the unit and call the store where you purchased.
<Wrong>
L +
-
-
L +
-
-
+
+
+
+
+
L +
-
+
+
-
-
+
+
-
-
Troubleshooting Tips
Chassis
+
R -
-
R -
-
+
R -
Common
Trouble
Chassis
¡Never connect the speaker cord to
the body of the car.
¡Do not use a 3-wire type speaker
system having a common earth
lead.
Cause
Car's ignition switch is not on.
¡Do not connect more than one
speaker to one set of speaker
leads.
Cables are not correctly connected.
Battery cable is not correctly connected.
Fuse
Unit does not turn on.
Grounding wire is not correctly connected.
Use fuses of the same specified rating (15 A). Using different substitutes or fuses with higher ratings, or connecting the unit
directly without a fuse, could cause fire or damage to the unit.
If the fuse replacement fails, contact your shop when you purchased this unit.
Fuse is burnt out.
No sound
Maintenance
Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for routine exterior
cleaning. Never use benzine, thinner, or other solvents.
22
CQ-FX323W
Accessory cable is not correctly connected.
Connect cables correctly.
Connect the batter cable to the terminal
that is always live.
Connect the accessory cable to your car's
ACC source.
Connect the grounding wire to a metal
part of the car.
Call the store where you purchased
the unit, or your nearest service station
and ask for fuse replacement.
Mute is set to ON.
Set it to OFF.
Cables are not correctly connected.
Connect cables correctly.
Condensation(dew)
Wait for a while before use.
A mobile phone is used near the unit.
Noise
Step
Turn your car's ignition switch to ACC or
ON.
The unit's grounding wire is not connected
securely.
Keep the mobile phone away from the
unit.
Check the metal areas of the car body
(chassis), and connect the grounding
wire more securely.
CQ-FX323W
23
E
N
G
L
I
S
H
Specifications
Troubleshooting (continue)
Radio
General
Trouble
Cause
Station is too far, or signals are too weak.
19
Much noise in FM stereo
and monaural broadcasts.
Extend the radio antenna.
The motor antenna relay control lead is not
connected correctly.
If there is a motor antenna in the car,
connect the antenna control lead to the
motor antenna lead that is installed in the
car correctly.
Battery cable is not correctly connected.
Check the ground connection of the
mounted base part of the antenna, and
tighten up the screw.
Connect the battery cable to the terminal
that is always live.
Cassette Tape Player
Trouble
Cause
Tape sound quality is poor.
High tones are improperly
emphasized.
Reproduction of high tones
is poor.
Poor quality tape
Dolby tape played with Dolby B NR off.
Step
Clean heads. (Ask a service representative for advice.)
Use better quality tape.
Activate the Dolby B NR mode.
Metal type tape played with Normal mode.
Change Normal mode to Metal mode.
Non-Dolby tape plays with Dolby B NR on.
Cancel the Dolby B NR mode.
Normal type tape plays with Metal mode.
Change Metal mode to Normal mode.
Demagnetize heads. (Ask a service representative for advice.)
Heads are dirty.
Heads are magnetized.
Power Supply
Tone Controls
Select other station of higher signal level.
The radio antenna is not extended enough.
The ground connection of the radio antenna is not secure enough.
Preset station is reset.
Step
No sound
Blank tape inserted into the unit.
Insert recorded tape into the unit.
Wow and Flutter level is
very high.
Tape-running mechanism is dirty or out of
order.
Clean tape-running mechanism, or repair
it. (Ask a service representative for
advice)
Current Consumption
Maximum Power Output
Speaker Impedance
Pre-Amp Output Impedance
Pre-Amp Output Voltage
Dimensions
Weight
:DC 12 V (11 V - 16 V), Test Voltage 14.4 V, Negative Ground
:Bass
; ±12 dB at 100 Hz
:Treble ; ±12 dB at 10 kHz
:Less than 2.5 A (tape mode, 0.5 W 4-Speaker)
:45 W x 4 (at 4 Ω)
:4 - 8 Ω
:200 Ω
:2V
:178(W) x 50(H) x 150(D) mm
:1.5 kg
E
N
G
L
I
S
H
20
1
AM Radio
Frequency Range
Usable Sensitivity
:531 - 1,602 kHz
:28 dB/µV(S/N 20 dB)
FM Stereo Radio
Frequency Range
Usable Sensitivity
Stereo Separation
:87.5 - 108 MHz
:6 dB/µV(S/N 30 dB)
:35 dB (at 1 kHz)
Cassette Tape Player
Reproduction System
Tape Speed
FF/REW Time
Frequency Response
Wow and Flutter
Signal to Noise Ratio
:4-track, 2-program stereo
:4.76 cm/sec.
:Less than 110 sec. (C-60)
:30 - 17,000 Hz (normal)
30 - 18,000 Hz (metal)
:0.12 % (WRMS)
:52 dB (Dolby off)
62 dB (Dolby B NR on)
Sound Setting
Trouble
No sound from
left,right,front or rear
speakers.
Left and right sounds are
reversed in stereo listening.
24
Cause
Left and right balance, or front and rear
balance is OFF on one side.
Cables are not correctly connected.
The right speaker wire is connected to the
left speaker and the left speaker wire to the
right speaker.
CQ-FX323W
Step
Adjust balance/fader mode as appropriate.
Connect cables correctly.
Reverse the speaker wire connections.
Note: Specifications and design are subject to modification without notice due to improvements.
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
CQ-FX323W
25
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement