Panasonic CYVMD9000U Operating instructions

Panasonic CYVMD9000U Operating instructions
User Settings
E
N
G
L
I
S
H
Notes:
≥ Press [MODE] to return to the regular mode.
≥ The display returns to the previous one with no operation
for more the 60 seconds after changing to the setting
menu.
[MODE]
29
DISC/BAND
VOLUME
NAVIGATION
MUTE
MENU
MODE
NAVI
POWER
ASPECT
ENTER
ASP
E
N
G
L
I
S
H
TRACK/
TUNE
P•MODE
30
[MENU]
[MENU] [MODE]
["] [#] [%] [$]
(SELECT, ADJUST)
[ENTER]
["] [#] [%] [$]
(SELECT, ADJUST)
[ENTER]
1 Menu
Monitor Position
Default:
TILT: 3
SLIDE: FRONT
Setting range:
TILT: 1 to 5
SLIDE: FRONT, REAR
2 Submenu
1 Press ["] or [#] to
select “TILT/SLIDE”.
2 Press [ENTER] to set.
TILT/SLIDE
Note:
≥ You can set the navigation speaker setting when “RGB” is selected on navigation input.
* When connected to
CA-TU7000U
E
on the display unit for
Front-rear position
Rear
[$]
Front
[%]
Navigation input
1 Press [#] or ["] to select “NAVI IN”.
2 Press [%] or [$] to select the setting.
: Connected to the RGB input cord, or a car navigation system not connected.
RGB
DVD
* SOUND
The monitor position setting menu can also be displayed by pressing [TILT]
more than 1 second. (For details, refer to page 25.)
Tilt angle
1 Press [#] or ["] to select the setting.
1 to 5
1
2
3
4
5 : Tilting angle
["]
[#]
adjustment
2 Press [%] or [$] to select the setting.
: Front-rear
FRONT
REAR
position
Notes:
NAVI IN
SCREEN
Default:
Navigation input: RGB
Speaker setting: AUTO
P• MOD
≥ For smooth adjustment, make sure to first return to the lateral angle to the neutral position and then
adjust the tilt and angle.
≥ Front-rear position “REAR” and the tilt angle “5” cannot be selected at the same time.
1 Press [MENU]
to display the main
menu.
2 Press [$] or [%] to
select “USER”.
USER
Navigation Set up
3 Setting
1 Press ["] or [#] to
select “NAVI SETUP”.
2 Press [ENTER] to set.
NAVI SETUP
VTR1
: Connected to the VTR1-IN
VTR2
: Connected to the VTR2-IN
3 Press [ENTER] to set.
SP SETUP
Speaker setting (output setting of supplied speaker)
1 Press ["] or [#] to select “SP SETUP”.
2 Press [%] or [$] to select the setting.
: Sound does not come out.
OFF
AUTO
: The sound comes out in the same mode as the picture.
: The sound from the Panasonic car navigation system (not available yet) always
comes out.
3 Press [ENTER] to set.
NAVI
44
CY-VMD9000U
CY-VMD9000U
45
User Settings (Continued)
E
N
G
L
I
S
H
Notes:
≥ Press [MODE] to return to the regular mode.
≥ The display returns to the previous one with no operation
for more the 60 seconds after changing to the setting
menu.
[MODE]
[MENU]
31
DISC/BAND
VOLUME
NAVIGATION
MUTE
MENU
MODE
NAVI
POWER
ASPECT
ENTER
ASP
TRACK/
TUNE
P•MODE
[MENU] [MODE]
E
N
G
L
I
S
H
["] [#] [%] [$]
(SELECT)
[ENTER]
32
["] [#] [%] [$]
(SELECT)
[ENTER]
1 Menu
2 Submenu
3 Setting
P• MOD
Navigation input
NAVI IN
When connecting to
CA-TU7000U/9000U
E
1 Press ["] or [#] to select “NAVI IN”.
2 Press [%] or [$] to select the setting.
: Connected to the RGB input cord,
or a car navigation system not connected.
RGB
Navigation Set up
Default:
Navigation input: RGB
Navigation volume: 4
Navigation mute: `10 dB
Note:
≥ You can set the navigation volume and
navigation mute level when “RGB” is
selected on navigation input.
1 Press [MENU] to
display the main
menu.
2 Press [$] or [%] to
select “USER”.
USER
SCREEN
: Connected to the VTR1-IN
VTR2
: Connected to the VTR2-IN
3 Press [ENTER] to set.
NAVI VOLUME
1 Press ["] or [#] to
select “NAVI SETUP”.
2 Press [ENTER] to set.
Navigation volume
1 Press ["] or [#] to select “NAVI VOLUME”.
2 Press [%] or [$] to select the setting.
: The sound that a Panasonic car navigation system (not available yet) generates does
0
not come out.
1
2
3
4
5
NAVI SETUP
DVD
VTR1
Low
High
: Navigation volume level
3 Press [ENTER] to set.
* SOUND
* When connected to
CA-TU7000U
NAVI MUTE (dB)
Navigation mute level
Preparation:
≥ Connect the navi mute cord.
Select the mute level of this unit during the voice guidance from the Panasonic car navigation system
(not available yet).
1 Press ["] or [#] to select “NAVI MUTE (dB)”.
2 Press [%] or [$] to select the setting.
: Unchanged
0
`20
`10
: Decrease to 1/3
`¶
: Decrease to 1/10
: No sound
3 Press [ENTER] to set.
46
CY-VMD9000U
CY-VMD9000U
47
User Settings (Continued)
E
N
G
L
I
S
H
Notes:
≥ Press [MODE] to return to the regular mode.
≥ The display returns to the previous one with no operation
for more the 60 seconds after changing to the setting
[MODE]
menu.
[MENU]
33
DISC/BAND
VOLUME
NAVIGATION
MUTE
MENU
MODE
NAVI
POWER
ASPECT
ENTER
ASP
TRACK/
TUNE
P•MODE
[MENU] [MODE]
E
N
G
L
I
S
H
["] [#] [%] [$]
(SELECT, ADJUST)
[ENTER]
34
["] [#] [%] [$]
(SELECT, ADJUST)
[ENTER]
P• MOD
1 Menu
2 Submenu
3 Setting
1 Press [%] or [$] to select the setting.
Rear View Camera Set up
Default: OFF
E
1 Press ["] or [#] to
select “CAMERA IN”.
2 Press [ENTER] to set.
VTR1
: Connected to the VTR1-IN
CAMERA IN
VTR2
: Connected to the VTR2-IN
OFF
: Unconnected
Notes:
≥ Make sure to select “OFF” when no rear view
camera is connected.
≥ In case using an optional rear view camera,
the reverse lead must be connected.
(➡ page 79)
2 Press [ENTER] to set.
1 Press [MENU] to
display the main
menu.
2 Press [$] or [%] to
select “USER”.
DISPLAY
1 Press ["] or [#] to select “DISPLAY”.
2 Press [%] or [$] to select the setting.
USER
SCREEN
Clock Setting
(12-hour system)
Default:
Clock display: OFF
DVD
* SOUND
* When connected to
CA-TU7000U
Clock display
Clock display
1 Press ["] or [#] to
select “CLOCK”.
2 Press [ENTER] to set.
CLOCK
OFF
: Clock display OFF
ON
: Clock display ON (“12:00” is displayed
before adjusting the clock.)
ADJUST
Clock adjustment
1 Press ["] or [#] to select “ADJUST”.
2 Press [%] to adjust the hour.
Press [$] to adjust the minute.
Press and hold ["] or [#] to change
numbers rapidly.
SEC RESET
Clock re-adjustment
[%] hour advance
[$] minute advance
Blinks once.
Reset the clock to zero seconds.
The clock display blinks once and clock starts.
48
CY-VMD9000U
CY-VMD9000U
49
User Settings (Continued)
E
N
G
L
I
S
H
E
N
G
L
I
S
H
Note:
≥ Press [MODE] to return to the regular mode.
35
[MODE]
[MENU]
DISC/BAND
VOLUME
NAVIGATION
MUTE
MENU
MODE
NAVI
POWER
[MENU] [MODE]
ASPECT
ENTER
ASP
36
TRACK/
TUNE
P•MODE
["] [#] [%] [$]
(SELECT)
[ENTER]
["] [#] [%] [$]
(SELECT)
[ENTER]
[0] to [9]
(ID CODE INPUT)
1 Menu
2 Submenu
P• MOD
E
3 ID Code Setting
How to set your ID code (For the first time)
ID Code Setting
Prior to operating this unit, it is advisable
to assign your 4-digit ID code for security.
(Make sure to use four digits for ID code.
ID code cannot be set with two or three
digits.)
Once the ID code has been set, the unit
cannot be operated if the main power supply is disconnected then re-connected. It is
electronically locked so that a thief could
not use the stolen unit unless that person
knows the code your have set.
The ID code operation must be performed
only by the person whom the unit belongs
to.
1 Press [MENU] to
display the main
menu.
2 Press [$] or [%] to
select “USER”.
Generally, it is not necessary to enter the
ID code each time when using the unit if
it has never been disconnected from the
main power supply (car battery).
* When connected to
CA-TU7000U
Note:
≥ Refer to ID code input regarding how to
enter the ID cord. (➡ page 17)
Caution:
≥ Record your registered ID code and
keep it in a secure location. If you forget
it, you will be unable to use the unit. In
case that you cannot operate the unit
because of forgetting the ID code,
please consult your nearest Panasonic
Servicenter.
50
CY-VMD9000U
Note:
≥ When you are setting your ID code for the first time, it is not
necessary to enter the old ID code.
1 Enter an ID code of 4 digits pressing the buttons [0] to [9]
on the remote control.
2 Enter the ID code of 4 digits again pressing the buttons
[0] to [9] on the remote control.
USER
SCREEN
DVD
1 Press ["] or [#] to
select “ID-CODE”.
2 Press [ENTER] to set.
* SOUND
ID-CODE
How to change your ID code
1 Enter the preset (old) ID cord of 4 digits pressing the buttons [0] to [9] on the remote control.
If the wrong ID cord is entered, a new ID code cannot be
registered.
2 Enter a new ID cord of 4 digits pressing the buttons [0] to
[9] on the remote control.
3 Enter the new ID code of 4 digits again pressing the buttons [0] to [9] on the remote control.
How to cancel the known ID code
Note:
≥ Should your unit ever require service, cancel your ID code
before sending for repair.
How to cancel the known ID code
1 Enter the preset (old) ID cord of 4 digits pressing the buttons [0] to [9] on the remote control. If the wrong ID code
is entered, it is not possible to cancel the ID code function.
2 Press and hold [ENTER] until display the “Complete!”.
The ID code cancelling procedure is completed. The unit
now works without an ID code.
CY-VMD9000U
51
User Settings (Continued)
E
N
G
L
I
S
H
Notes:
≥ Press [MODE] to return to the regular mode.
≥ The display returns to the previous one with no operation
for more the 60 seconds after changing to the setting
menu.
[MODE]
[MENU]
37
DISC/BAND
VOLUME
NAVIGATION
MUTE
MENU
MODE
NAVI
POWER
[MENU] [MODE]
ASPECT
ENTER
ASP
TRACK/
TUNE
P•MODE
["] [#] [%] [$]
(SELECT)
[ENTER]
2 Submenu
3 Setting
P• MOD
BEEP
2 Press [%] or [$] to select the setting.
Enable or disable the beep of button operation.
OFF
: Operation sound (beep) OFF
Default: ON
ON
: Operation sound (beep) ON
Default: VTR1
1 Press [MENU] to
display the main
menu.
2 Press [$] or [%] to
select “USER”.
1 Press ["] or [#] to
select “etc”.
2 Press [ENTER] to set.
etc
SCREEN
DVD
Note:
≥ The loud beep is energized when opening or
closing the display unit even if you select
“OFF” for the beep setting.
3 Press [ENTER] to set.
VIDEO-CONT
Video control setting
1 Press ["] or [#] to select “VIDEO-CONT”.
2 Press [%] or [$] to select the setting.
USER
E
Beep setting
1 Press ["] or [#] to select “BEEP”.
Button Operation Sound
This “Video Control Setting” is required
when you connect a Panasonic car navigation system with a built-in DVD player.
(not available yet)
38
["] [#] [%] [$]
(SELECT)
[ENTER]
1 Menu
Video Control Setting
E
N
G
L
I
S
H
VTR1
: Connected to the VTR1-IN
VTR2
: Connected to the VTR2-IN
Note:
≥ Select a terminal connected to the DVD output terminal of a Panasonic car navigation
system with a built-in DVD player (not available yet) through an RCA cord.
3 Press [ENTER] to set.
* SOUND
When connecting to CA-TU7000U
Main Input
This setting is required when you connect
a Panasonic digital surround processor
(CY-AC300).
1 Press [%] or [$] to select the setting.
1 Press ["] or [#] to
select “MAIN-IN”.
2 Press [ENTER] to set.
MAIN-IN
OFF
ON
: No use of MAIN-IN (front/rear)
terminal
: Use of MAIN-IN (front/rear)
terminal
Note:
≥ Be sure to select “OFF” when you do not connect a digital surround processor (CYAC300). If you select “ON”, sound does not
come out from the speakers.
2 Press [ENTER] to set.
Default: OFF
52
* When connected to
CA-TU7000U
CY-VMD9000U
CY-VMD9000U
53
Display (Screen) Settings
E
N
G
L
I
S
H
Notes:
≥ Press [MODE] to return to the regular mode.
≥ The display returns to the previous one with no operation
for more the 60 seconds after changing to the setting
menu.
[MODE]
[MENU]
39
DISC/BAND
VOLUME
NAVIGATION
MUTE
MENU
MODE
NAVI
POWER
ASPECT
ENTER
ASP
TRACK/
TUNE
P•MODE
[MENU] [MODE]
["] [#] [%] [$]
(SELECT, ADJUST)
[ENTER]
2 Submenu
1 Press ["] or [#] to
select “DIMMER”.
2 Press [ENTER] to set.
Dimmer
Adjust the brightness of the backlight.
Default: AUTO
DIMMER
Contrast
Default: d0
Setting range: `15 to _15
40
["] [#] [%] [$]
(SELECT, ADJUST)
[ENTER]
1 Menu
Adjust the image contrast.
E
N
G
L
I
S
H
1 Press [MENU] to
display the main
menu.
2 Press [$] or [%] to
select “SCREEN”.
Brightness
1 Press ["] or [#] to
select “CONTRAST”.
2 Press [ENTER] to set.
CONTRAST
Adjust the image brightness.
USER
Default: d0
Setting range: `15 to _15
1 Press ["] or [#] to
select “BRIGHT”.
2 Press [ENTER] to set.
SCREEN
BRIGHT
3 Setting
P• MOD
E
1 Press [%] or [$] to select the setting.
: Automatically adjusted according to ambient light intensity.
AUTO
1
2
3
4
: Darker (1) to brighter (4)
2 Press [ENTER] to set.
Press [%] or [$] to adjust the level.
Decrease the contrast
between black and white.
Increase the contrast
between black and white.
Press [%] or [$] to adjust the level.
Darken
Lighten
DVD
Color
Adjust the image color depth.
Default: d0
Setting range: `15 to _15
Tint
Adjust the image tone or tint.
Default: d0
Setting range: `15 to _15
54
CY-VMD9000U
* SOUND
* When connected to
CA-TU7000U
1 Press ["] or [#] to
select “COLOR”.
2 Press [ENTER] to set.
COLOR
1 Press ["] or [#] to
select “TINT”.
2 Press [ENTER] to set.
TINT
Press [%] or [$] to adjust the level.
Lighten the depth of color
on the display.
Deepen the depth of
color on the display.
Press [%] or [$] to adjust the level.
Emphasize red in the
color image.
Emphasize green in the
color image.
CY-VMD9000U
55
DVD Settings
E
N
G
L
I
S
H
Notes:
≥ Press [MODE] to return to the regular mode.
≥ The display returns to the previous one with no operation
for more the 60 seconds after changing to the setting
menu.
[MODE]
["] [#]
[MENU]
[%] [$]
(SELECT)
[ENTER]
[0] to [9]
(LANGUAGE CODE INPUT)
41
DISC/BAND
VOLUME
NAVIGATION
MUTE
MENU
MODE
NAVI
POWER
ASPECT
ENTER
ASP
TRACK/
TUNE
P•MODE
[MENU] [MODE]
E
N
G
L
I
S
H
["] [#] [%] [$]
(SELECT)
[ENTER]
42
P• MODE
1 Menu
2 Submenu
1 Press ["] or [#] to
select “MENU”.
2 Press [ENTER] to set.
DVD Menu Language
Default: ENGLISH
MENU
3 Setting
4 In “OTHER” cases
1 Press [%] or [$] to select the setting.
ENGLISH : English is selected.
FRENCH
: French is selected.
SPANISH : Spanish is selected.
OTHER
1 Input the four digit language
code pressing the buttons [0]
to [9] on the remote control.
(➡ page 90)
2 Press [ENTER] to set.
: See the right.
2 Press [ENTER] to set.
1 Press [MENU] to
display the main
menu.
2 Press [$] or [%] to
select “DVD”.
USER
Subtitle Language
SCREEN
Default: ENGLISH
1 Press [%] or [$] to select the setting.
ENGLISH : English is selected.
FRENCH
1 Press ["] or [#] to
select “SUBTITLE”.
2 Press [ENTER] to set.
SUBTITLE
OTHER
: See the right.
DISP OFF : Subtitle are not displayed.
Note:
≥ A disc supporting closed captioning and subtitles may
overlap each other on the screen. In this case, turn the
subtitle off.
* SOUND
* When connected to
CA-TU7000U
Default: ENGLISH
SPANISH : Spanish is selected.
2 Press [ENTER] to set.
DVD
Audio Language
: French is selected.
1 Press ["] or [#] to
select “AUDIO”.
2 Press [ENTER] to set.
AUDIO
1 Press [%] or [$] to select the setting.
ENGLISH : English is selected.
FRENCH
: French is selected.
To input the number again:
Input the four digit language code
again pressing the buttons [0] to
[9] on the remote control after the
steps above.
Note:
≥ When the disc has predetermined
language or recorded no language,
the DVD settings for language is not
reflected.
SPANISH : Spanish is selected.
OTHER
: See the right.
2 Press [ENTER] to set.
56
CY-VMD9000U
CY-VMD9000U
57
DVD Settings (Continued)
E
N
G
L
I
S
H
Notes:
≥ Press [MODE] to return to the regular mode.
≥ The display returns to the previous one with no operation
for more the 60 seconds after changing to the setting
menu.
[MODE]
43
DISC/BAND
VOLUME
NAVIGATION
MUTE
MENU
MODE
NAVI
POWER
ASPECT
ENTER
ASP
TRACK/
TUNE
P•MODE
[MENU] [MODE]
E
N
G
L
I
S
H
44
[MENU]
["] [#] [%] [$]
(SELECT)
[ENTER]
["] [#] [%] [$]
(SELECT)
[ENTER]
1 Menu
2 Submenu
3 Setting
P• MOD
DVD ASPECT
E
Display aspect setting
1 Press [#] or ["] to select “DVD ASPECT”.
Display Aspect and DVD
Software Mode
Default:
DVD Aspect: WIDE
DVD Mode: PAN & SCAN
WIDE
NARROW
: Plays a video in wide screen (16:9).
: Plays a video in 4:3 screen.
3 Press [ENTER] to set.
USER
SCREEN
DVD
Note:
≥ Screen aspect of the display unit is
changed according to the aspect ratio
setting (➡ page 42) and DVD software’s
aspect.
2 Press [%] or [$] to select the setting.
1 Press [MENU] to
display the main
menu.
2 Press [$] or [%] to
select “DVD”.
1 Press ["] or [#] to
select “DISPLAY”.
2 Press [ENTER] to set.
Note:
≥ The video software of the display unit is also switched to the same settings.
DISPLAY
DVD MODE
* SOUND
* When connected to
CA-TU7000U
DVD software mode
1 Press [#] or ["] to select “DVD MODE”.
2 Press [%] or [$] to select the setting.
PAN & SCAN
LETTERBOX
: Plays wide-screen video in Pan & Scan mode (in which the left and right
edges of the screen are cut off).
: Plays wide-screen video in Letterbox mode (in which black bands appear at
the top and bottom of the screen).
3 Press [ENTER] to set.
Notes:
≥ Set the software setting according to the symbol used on jackets.
≥ DVD mode setting is ignored if “PAN & SCAN” or “LETTERBOX” is already set in the software.
58
CY-VMD9000U
CY-VMD9000U
59
Sound Settings
E
N
G
L
I
S
H
Notes:
≥ Press [MODE] to return to the regular mode.
≥ The display returns to the previous one with no operation
for more the 60 seconds after changing to the setting
menu.
≥ See page 66 to 75 of the operating instructions for CATU9000U when connecting to CA-TU9000U.
[MODE]
45
DISC/BAND
VOLUME
NAVIGATION
MUTE
MENU
MODE
NAVI
POWER
[MUTE]
(LOUDNESS)
ASPECT
ENTER
ASP
TRACK/
TUNE
P•MODE
[MODE]
[MENU]
["] [#] [%] [$]
(SELECT, ADJUST)
[ENTER]
Bass/Treble
Default: d0 dB
Setting range: `12 dB to _12 dB
(2 dB step)
2 Submenu
3 Setting
BASS
1 Press [MENU] to
display the main
menu.
2 Press [$] or [%] to
select “SOUND”.
1 Press ["] or [#] to
select “TONE”.
2 Press [ENTER] to set.
[DRC]
(DYNAMIC RANGE
COMPRESSION)
TREBLE
SCREEN
When connecting to CA-TU7000U
Balance/Fader
Default: Center
Setting range: 15 levels for each
Dynamic Range Compression
(Producing Audio that Is
Audible at Low Volumes)
FADER
DVD
* SOUND
* When connected to
CA-TU7000U
1 Press ["] or [#] to
select “BAL/FAD”.
2 Press [ENTER] to set.
BAL/FAD
Press [DRC] on the remote control to turn this
function on and off .
DR COMP OFF
DR COMP STD
DR COMP MIN
60
When connecting to CA-TU7000U
Press and hold [MUTE] (LOUDNESS) for more than
2 seconds.
Tone Enhancement
(Loudness)
When listening at low or medium volume, enhance
bass and trebles tones.
Default: ON
≥ Press and hold [MUTE] (LOUDNESS)
again to cancel.
CY-VMD9000U
Decrease the bass level.
Increase the bass level.
Decrease the treble level.
Increase the treble level.
Fader
1 Press [#] or ["] to select “FADER”.
2 Press [%] or [$] to adjust the level.
BALANCE
[MUTE]
(LOUDNESS)
Treble adjustment
1 Press [#] or ["] to select “TREBLE”.
2 Press [%] or [$] to adjust the level.
USER
P• MODE
Bass adjustment
1 Press [#] or ["] to select “BASS”.
2 Press [%] or [$] to adjust the level.
TONE
46
[MENU]
["] [#] [%] [$]
(SELECT, ADJUST)
[ENTER]
1 Menu
When connecting to CA-TU7000U
E
N
G
L
I
S
H
Rear enhanced.
Front enhanced.
Left enhanced.
Right enhanced.
Balance
1 Press [#] or ["] to select “BALANCE”.
2 Press [%] or [$] to adjust the level.
DR COMP OFF: Movie theater mode with no compression.
DR COMP STD: Mode recommended by the software
manufacturer for listening at low volume.
≥ Available only for the software with
DR COMP function.
DR COMP MIN: Mode with the greatest compression,
roughly equivalent to a TV broadcast.
MIN
OFF
STD
Dynamic range compression:
This function compresses the difference in volume between the lowest volume that can be
heard above background noise and the maximum volume that can be played without distortion.
Because this function is able to reduce peak
levels while still maintaining an “open” sound
field, use this function when you want to keep
the volume low.
Conversation
level
CY-VMD9000U
61
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement