Panasonic TH37PE40B Operating Instructions

Panasonic TH37PE40B Operating Instructions
MODE
OK
1
2
3
4
5
6
7
8
9
C
0
N
IDTV
Operating Instructions
Digital Progressive Plasma Television
Model No.
TH-37PE50B
TH-42PE50B
TH-37PE40B
TH-42PE40B
The image shown is for illustration only.
Pedestal stand shown above is optional extra.
(U.K. Standard)
Please read these instructions before operating your set and retain them for future reference.
English
TQB0E0168-2
Dear Panasonic Customer,
We hope that you have many years of enjoyment from your new TV. The Quick Start Guide section at the beginning of
this instruction book will allow you to use the TV as quickly as possible. We recommend that you then read the complete
instruction book, and keep it to refer to as you explore the range of advanced features that this Plasma TV offers.
Analogue and Digital television – what are they?
Analogue transmission is the system that has been used for many years for broadcasting television programmes. With continuous
improvements in technology it is now possible to transmit programmes in a digital format, allowing clearer pictures, more stations and
other services to be displayed on screen. Digital television is provided in three different ways; it can be sent along a cable connection
direct to your house, broadcast from a satellite, or broadcast using traditional land based (terrestrial) transmitters. The first two options
require you to have an extra “set top box” decoder and in the case of satellite, a receiving dish mounted outdoors. While allowing you
to receive traditional analogue transmissions in the usual way, this television can also receive terrestrial digital services using an
(Digital Video Broadcasting) decoder. This allows you to enjoy the new era of digital terrestrial television, including
integrated
interactive services, without the need for a “set top box” or satellite dish – an adequate roof or loft mounted antenna is all you need.
Contents
Important Safety Notice ............................................ 3
Safety Precautions .................................................... 4
Maintenance ............................................................. 5
Accessories ............................................................... 6
Fitting remote control batteries ................................. 6
AC cord connection ................................................... 7
Cable binding instructions ......................................... 7
Quick Start Guide ...................................................... 8
Basic controls: front panel and remote control ......... 11
Using the On Screen Displays ................................ 12
Picture menu ........................................................... 13
Sound menu ............................................................ 14
Setup menu ............................................................. 15
Tuning menu – overview ......................................... 16
Tuning menu – Programme edit .............................. 17
Adding / deleting a programme channel .............. 17
Moving a programme channel ............................. 17
Renaming a programme channel ........................ 18
Locking a programme channel ............................ 18
Copying programme information to
a recording device .................................... 18
Tuning menu – Auto setup ...................................... 19
Tuning menu – Manual tuning ................................. 20
Manual tuning (via front panel) ............................... 20
Owner ID ................................................................. 21
Shipping condition ................................................... 22
DVB Setup Menu – overview ..................................
Timer programming menu .......................................
Profile Edit menu .....................................................
Child Lock menu .....................................................
DVB Tuning Menu ...................................................
DVB System Setup .................................................
Common Interface Module menu ............................
System Update menu .............................................
TV Guide - Electronic Programme Guide (EPG) ....
Information banner ..................................................
Subtitles ON / OFF ..................................................
Q-Link ......................................................................
Aspect Controls .......................................................
Still ..........................................................................
VCR / DVD operation ..............................................
Teletext operation ....................................................
Audio / video connections ......................................
How to connect the Audio Output terminals ........
How to connect the AV1 / 2 / 3 Scart terminals ....
How to connect the Component Input terminals ..
Troubleshooting ......................................................
DVB Troubleshooting ..............................................
Scart terminal information .......................................
Component signal that can be displayed ................
Specifications ..........................................................
23
24
26
27
28
29
30
31
32
33
33
34
35
36
37
38
41
42
42
42
43
44
45
45
46
Trademark Credits
DVB is a trademark of the DVB Digital Video Broadcasting Project (1991 to 1996) .
CAUTION:
Symptoms
After-images appear
ABCDEF
2
Check
Do not allow a still picture to be displayed for an extended period, as this can cause a permanent after-image
to remain on the Plasma TV.
Examples of still pictures include logos, video games, computer images, teletext and images displayed in
4:3 mode.
With no signal present, and without any user operation, the Panasonic screensaver will appear automatically
after a few minutes to prevent image retention.
During DVB teletext, radio service or menu display, the level of the contrast will decrease automatically after
a few minutes to prevent image retention.
Note:
The permanent after-image on the Plasma TV resulting from fixed image use is not an operating defect and
as such is not covered by the Warranty.
This product is not designed to display fixed images for extended periods of time.
Important Safety Notice
WARNING
1) To prevent damage which may result in fire or shock hazard, do not expose this appliance to dripping or
splashing.
Do not place containers with water (flower vase, cups, cosmetics, etc.) above the set. (including on
shelves above, etc.)
2) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified
service personnel.
3) Do not remove the earthing pin on the power plug. This apparatus is equipped with a three pin earthing-type
power plug. This plug will only fit an earthing-type power outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, contact an electrician.
Do not defeat the purpose of the earthing plug.
CAUTION
1) This appliance is intended for use in environments which are relatively free of electromagnetic fields.
Using this appliance near sources of strong electromagnetic fields or where electrical noise may overlap with
the input signals could cause the picture and sound to wobble or cause interference such as noise to appear.
To avoid the possibility of damage to this appliance, keep it away from sources of strong electromagnetic fields.
2) If a static electricity discharge occurs inside the front cover, the screen may momentarily flicker. This is not a
malfunction.
The screen will return to normality in a short while.
To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected.
IMPORTANT: THE MOULDED PLUG
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse
is fitted in this plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating of
5 amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
ASA
or the BSI mark
on the body of the fuse.
If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement cover is obtained.
A replacement fuse cover can be purchased from your local Panasonic Dealer.
If the fitted moulded plug is unsuitable for the socket outlet in your home, then the fuse shall be removed
and the plug cut off and disposed of safety. There is a danger of severe electrical shock if the cut off
plug is inserted into any 13 amp socket.
If a new plug is to be fitted, please observe the wiring code as shown below.
If in any doubt, please consult a qualified electrician.
WARNING: — THIS APPARATUS MUST BE EARTHED.
IMPORTANT: —The wires in this mains lead are coloured in accordance with the following code: —
Green-and-Yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows.
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is
or coloured GREEN or GREEN-AND-YELLOW.
marked with the letter E or by the Earth symbol
The wire which is coloured BLUE must be connected to the terminal in the plug which
is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in the plug
which is marked with the letter L or coloured RED.
How to replace the fuse. Open the fuse compartment with a screwdriver and replace the fuse.
3
Safety Precautions
WARNING
Setup
This Plasma TV is for use only with the following optional accessories. Use with any other type of optional
accessories may cause instability which could result in the possibility of injury.
(All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.)
• Pedestal ................................................. TY-ST42PA50W
• Display stand ......................................... TY-S37PA50W (TH-37PE50B, TH-37PE40B)
TY-S42PA50W (TH-42PE50B, TH-42PE40B)
• Wall-hanging bracket (vertical) .............. TY-WK42PV3W, TY-WK42PV2W
• Wall-hanging bracket (angle) ................ TY-WK42PR2W
Always be sure to ask a qualified technician to carry out installation.
Do not place the Plasma TV on sloped or unstable surfaces.
• The Plasma TV may fall off or tip over.
Do not place any objects on top of the Plasma TV.
• If water is spilt onto the Plasma TV or foreign objects get inside it, a short-circuit may occur which could result in
fire or electric shock. If any foreign objects get inside the Plasma TV, please consult your local Panasonic dealer.
Ventilation should not be impleded by covering the ventilation openings with items such as
newspapers, table cloths and curtains.
If using the pedestal (optional accessory), leave a space of at least 10 cm at the top, left and right, at
least 6 cm at the bottom, and at least 7 cm at the rear. If using some other setting-up method, leave a
space of at least 10 cm at the top, bottom, left and right, and at least 1.9 cm at the rear.
Electromagnetic interference may occur if electronic equipments are placed near each other.
• It will cause interference in image, sound, etc. In particular, keep video equipment away from this product.
Keep unneeded small parts and other objects out of the reach of small children. These objects can be
accidentally swallowed. Also, be careful about packaging materials and plastic sheets.
When using the Plasma TV
The Plasma TV is designed to operate on 220 - 240 V AC, 50/60 Hz.
Do not cover the ventilation holes.
• Doing so may cause the Plasma TV to overheat, which can cause fire or damage to the Plasma TV.
Do not insert any foreign objects into the Plasma TV.
• Do not insert any metal or flammable objects into the ventilations holes or drop them onto the Plasma TV, as
doing so can cause fire or electric shock.
Do not remove the cover or modify it in any way.
• High voltages which can cause severe electric shocks are present inside the Plasma TV. For any inspection,
adjustment and repair work, please contact your local Panasonic dealer.
Ensure that the mains plug is easily accessible.
Securely insert the power cord plug as far as it will go.
• If the plug is not fully inserted, heat may be generated which could cause fire. If the plug is damaged or the wall
socket plate is loose, do not use them.
Do not handle the power cord plug with wet hands.
• Doing so may cause electric shocks.
Do not do anything that may damage the power cable. When disconnecting the power cable, pull on
the plug body, not the cable.
• Do not damage the cable, make any modifications to it, place heavy objects on top of it, heat it, place it near any
hot objects, twist it, bend it excessively or pull it. To do so may cause fire and electric shock. If the power cable
is damaged, have it repaired at your local Panasonic dealer.
If the Plasma TV is not going to be used for any prolonged length of time, unplug the power cord plug
from the wall outlet.
4
Safety Precautions
If problems occur during use
If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odour starts to come out
from the Plasma TV, immediately unplug the power cord plug from the wall outlet.
• If you continue to use the Plasma TV in this condition, fire or electric shock could result. After checking that the
smoke has stopped, contact your local Panasonic dealer so that the necessary repairs can be made. Repairing
the Plasma TV yourself is extremely dangerous, and should never be attempted.
If water or foreign objects get inside the Plasma TV, if the Plasma TV is dropped, or if the cabinet becomes
damages, disconnect the power cord plug immediately.
• A short circuit may occur, which could cause fire. Contact your local Panasonic dealer for any repairs that need
to be made.
CAUTION
When using the Plasma TV
Do not bring your hands, face or objects close to the ventilation holes of the Plasma TV.
• Heated air comes out from the ventilation holes at the top of Plasma TV will be hot. Do not bring your hands or
face, or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result.
Be sure to disconnect all cables before moving the Plasma TV.
• If the Plasma TV is moved while some of the cables are still connected, the cables may become damaged, and
fire or electric shock could result.
Disconnect the power cord plug from the wall socket as a safety precaution before carrying out any cleaning.
• Electric shocks can result if this is not done.
Clean the power cable regularly to prevent it becoming dusty.
• If dust built up on the power cord plug, the resultant humidity can damage the insulation, which could result in
fire. Pull the power cord plug out from the wall outlet and wipe the mains lead with a dry cloth.
This Plasma TV radiates infrared rays, therefore it may affect other infrared communication equipment.
Install your infrared sensor in a place away from direct or reflected light from your Plasma TV.
Maintenance
The front of the display panel has been specially treated. Wipe the panel surface gently using only a
cleaning cloth or a soft, lint-free cloth.
• If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water to
which a small amount of neutral detergent has been added, and then wipe it evenly with a dry cloth of the same
type until the surface is dry.
• Do not scratch or hit the surface of the panel with fingernails or other hard objects, otherwise the surface may
become damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and
thinner, otherwise the quality of the surface may be adversely affected.
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
• If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been
added and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.
• Do not allow any detergent to come into direct contact with the surface of the Plasma TV.
If water droplets get inside the unit, operating problems may result.
• Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the
cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long
periods in contact with articles made from rubber or PVC.
5
Accessories
Check that you have the accessories and items shown
Operating Instructions
Remote Control Transmitter
(EUR7651070)
Mains Lead
(K2CT3DH00018)
Clamper
(TMME206) × 2
MODE
OK
1
2
3
4
5
6
7
8
9
C
0
N
IDTV
Batteries for the Remote
Control Transmitter
(2 × R6 (UM3) size)
Pan European Guarantee Card
1 Year Guarantee Registration
Fitting remote control batteries
1
2
3
+
-
+
-
“R6 (UM3)” size
Pull and hold the hook, then
open the battery cover.
Insert batteries - note correct
polarity ( + and -).
Replace the cover.
• Make sure that the batteries are fitted the correct way round.
• Do not mix old batteries with new batteries. Remove old, exhausted batteries immediately.
• Do not mix different battery types, i.e. Alkaline and Manganese or use rechargeable (Ni - Cad)
batteries.
Batteries, packaging and old equipment should not be disposed of as domestic waste,
but in accordance with the applicable regulations.
6
AC cord connection
How to fix:
How to release:
Fix by pushing in till a clicking
sound is heard.
Pull up while drawing the knob.
Clamp
Cable binding instructions
For using the TY-ST42PA50W
Attach the bands.
Insert the spigot on the two bands into the
pedestal.
Fastening band
Band
Fastening
Connect cables.
Example of “connection cable routing”
Mains Lead
To tighten.
Clamp
Loosening
Pull off.
Binding strap
Keep the knob pressed.
Note:
Refer to the operating instruction book of the pedestal.
Band
7
Quick Start Guide
Connection and setting up options
Note: Please ensure that the unit is disconnected from the mains
before attaching or disconnecting any leads.
RF cable
(Not supplied)
Satellite Receiver
COMPONENT
AUDIO
AUDIO
VIDEO
L
L
Y
R
R
PB
AUDIO
IN
PR
RGB
VIDEO
AV1
VIDEO
AV2
AV3
VIDEO
S-VIDEO
RGB
S VIDEO
RF cable (Not supplied)
Scart cables
(Not supplied)
OR
VCR / DVD Recorder
Scart Connections
• The VCR / DVD Recorder can be connected to the TV using a Scart cable, if you are using a Scart equipped VCR
/ DVD Recorder.
• Use the TV’s any Scart terminal for any VCR. Always use a “fully wired” Scart cable.
• Use the TV’s AV1 or AV3 Scart terminal for any DVD Recorder. Always use a “fully wired” Scart cable.
• Use the TV’s AV1 or AV3 Scart terminal for Satellite Receiver. Always use a “fully wired” Scart cable.
RF Connection
• Connect the RF cable to the “Aerial In” terminal of the VCR / DVD Recorder and an RF cable from the VCR / DVD
).
Recorder “Aerial Out” terminal to the TV Aerial terminal (
Notes:
• If using a “Q-Link” VCR / DVD Recorder, then the AV1 Scart of the VCR / DVD Recorder must be connected to the
AV2 or AV3 terminal of the TV. If your VCR or DVD Recorder is not a “Q-Link” device, please consult the operating
instruction book for that product. Further information on Q-Link can be found on page 34.
• Further details of Audio / Video connections can be found on page 41, 42.
• Additional equipment and cables are not supplied.
8
Quick Start Guide
1
Connect the mains plug to the wall socket.
Press the [
the set on.
MODE
]switch on the TV set to turn
OK
To switch the TV set to Standby mode, press
the
button on the remote control.
The TV set can be switched on by pressing
button again if it was in Standby mode.
the
Note:
This TV will still consume some power even
in the Off mode, as long as the mains plug is
still connected to a live mains socket.
1
2
3
4
5
6
7
8
9
C
0
N
Power Indicator
Standby : Red
On : No Light
IDTV
Remote control signal sensor
DVB Indicator
DVB system active during Timer
recording or Direct TV Recording : Orange (flash)
Standby for Timer Recording : Orange
Otherwise : No Light
2
3
Programmes will appear immediately if your dealer has programmed
the TV for you.
If the TV has not been programmed for you then Auto setup will begin.
The TV will search for DVB stations and Analogue stations:
TV stations will be located, sorted into order and stored ready for use.
Stations are sorted into the following order:
• DVB Stations: Are sorted by their logical channel number sent by
the broadcasters, which can be made the favourites list by Profile
Edit. See page 26.
• Analogue Stations: Are sorted into channel order, but can be
changed to your preference. See page 17.
In this setup, usually Analogue auto setup screen may not be
displayed. The sorted programme order depends upon the TV signal,
the broadcasting system, and reception conditions.
DVB Aute Setup
Please Wait !
21
Prog. Channel Service Name
68
NetID.
TS ID. Quality
4
30 BBC NEWS 24
12302
4158
9
5
30 BBCI
12302
4158
9
6
30 CBBC Channel
12302
4158
9
7
30 BBC Radio Wales
12302
4158
9
8
30 BBC Radio Cymru
12302
4158
9
This will take about 3 mins.
Exit
CH44
AUTO SETUP IN PROGRESS
SEARCHING :
PLEASE WAIT
21
68
TV to VCR or DVD Recorder Download
Exit
If a “Q-Link”, “NEXTVIEWLINK” or compatible recording device has
been connected to a Scart terminal (AV2 or AV3) before starting Step
1, programme information will be downloaded to that device.
Only the analogue programme positions will be downloaded to the
DOWNLOAD IN PROGRESS
PLEASE WAIT
recording device, in the same order as stored in the TV. See page 34.
Programme
: 63
Not all VCRs / DVD Recorders support this download of programme
Remote control unavailable
information, some may require to be started manually.
Refer to the recording device’s operating instruction book.
If a recording device other than those described above has been connected, then there will be no download operation.
Notes:
• If the recording device has not accepted download data from the TV, you may need to select the Download
option from the device’s menu system. Refer to the recording device’s operating instruction book.
• If Q-Link is not operating correctly, check the following :
The Scart cable is connected to the TV’s Scart terminal, AV2 or AV3, and correctly setup in the menu.
The Scart cable is connected to the recording device’s compatible (Q-Link, NEXTVIEWLINK or similar
technology) Scart terminal.
The Scart cable is a “fully wired” type.
• For further information on Q-Link and connecting equipment, see page 34, 42, 45.
9
Quick Start Guide
4
Owner ID
As an added feature, this TV has the option of adding a security
code (Owner ID) and personal details into its memory, so that in the
unfortunate event of theft it will help the Police to trace the owner.
Using the numeric buttons to enter required 4 digit Owner ID PIN
NUMBER.
If a 4 digit PIN NUMBER was entered, you will be taken automatically
to the NAME line.
MODE
OK
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
C
0
VCR
If not, using the left or right cursor buttons move to the NAME line.
Change character using the up or down cursor buttons.
N
Select the character position using the left or right cursor buttons.
Repeat above until NAME, HOUSE NUMBER and POSTCODE
are entered.
Press the OK button to store the details.
Press the OK button again, when you are asked “Are you sure ? ”.
IDTV
OK
Yo u n o w h a ve t h e o p p o r t u n i t y
to enter your details and
help the police crack cr ime
see instruction book
For further information on Owner I.D., see page 21.
Owner ID
A space is provided on page 21 to write down the PIN NUMBER
for future reference.
PIN NUMBER
NAME
HOUSE NO
POSTCODE
:
:
:
:
∗∗∗∗
∗∗∗∗∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗∗
0123456789
Change character
Select character
Store Owner ID
Exit
Your Plasma TV is now ready for use.
GUIDE
5
To view a list of the stations that have been found, press the GUIDE button.
MODE
Use the cursor buttons to move the cursor bar.
OK
Use the programme change button to step through the guide page
by page.
To view the selected programme, move the cursor to the channel
and then press the OK button.
1
2
3
4
5
6
7
8
9
C
0
OK
EXIT
The guide can be cleared from the screen using the EXIT button.
DVB TV Guide (DVB mode) See page 32.
To make stations easier to find, specific stations can be listed by
category; press the Yellow button to show a category.
The chosen category name is shown on screen.
For example, if you select Free TV and press the OK button, only
‘free-to-air’ stations will be listed – you can view any of these now.
If you select Pay TV and press the OK button, only subscription
stations will be listed – you will need to contact the service provider
to find out how to subscribe to these stations.
Analogue mode
Analogue Programme Guide
Prog.
VCR
1
2
3
4
5
6
7
8
9
10
11
12
Name
:
:
:
:
:
:
:
:
:
:
:
:
:
BBC1
BBC2
ITV
S4C
Chan.
Prog.
CH21
CH44
CH51
CH41
CH47
CH23
CH26
CH58
-
13
14
15
16
17
18
19
20
21
22
23
24
Name
Chan.
:
:
:
:
:
:
:
:
:
:
:
:
-
DVB mode
DVB TV Guide :Landscape
Thu 05/08/04 18:50
Category
All Services
Fri 6th
Prog. type
All Types
20:00-21:00 Coronation Steet:We open in the Battersdy’s
Time: 19:30
20:00
20:30
21:00
Eastender DIY SOS
The Bill
2 BBC2
Hot Wars
Hollday Program
21 ITV1
Emmerdal. Coronation Street
44 Channel4 10 O’ clock News BBC
Red Cap
So
The Bill
Pepsi Char. Good bye Hell
122 five
Panoroma Sex And The City
Terminator
142 ITV2
I’m A Celebrlty
News
144 SC4
Rugby
Pop Idol
The
The Bill
15 To1
Change display mode
Select channel
Select Programme
Timer Programming
Exit
-24 Hr
+24 Hr
10
21:30
1 BBC1
Page up
Info
Page down
Category
Prog. type
Basic controls: front panel and remote control
On / Off switch
STR
Used to store tuning in analogue mode.
TV/AV button (see page 41)
F (Function select)
Press repeatedly to select from the available
functions through the On Screen Display:
- Volume, Contrast, Brightness, Colour,
Sharpness, Tint (in NTSC mode), Bass, Treble,
Balance and Manual Tuning (analogue mode
only - see page 20).
Press either button to change TV programme up or
down. Also used for changing various settings in
conjunction with the F button.
Press either button to switch the TV On from
Standby mode.
Standby On / Off button
Switches TV On or Off (Standby mode).
GUIDE button
Displays the DVB and Analogue TV
Guide. (see page 32).
Menu button
Press to access the Picture, Sound and
Setup menus. (see page 12-15)
Press to select a function or store a setting.
Press after selecting programme positions
to quickly change programme.
DVB DIRECT
Analogue TV REC
MODE
GUIDE
TV/AV
MENU
EXIT
Cursor buttons to make selections and
adjustments.
TEXT STTL INDEX HOLD
1
2
3
Teletext button (see page 38-40)
4
5
6
7
8
9
Direct channel access
Available in Analogue mode.
During normal TV viewing or when
in the Tuning, Programme edit or
Manual tuning menus, press and then
enter channel number using the numeric
buttons.
Programme up / down button
DIRECT TV Record button
(see page 34)
Switch between viewing TV or AV input.
(see page 41)
OK
Coloured buttons used for the selection,
navigation and operation of various
functions.
STTL button
Text F.P. button (Analogue mode)
Subtitle On/Off (DVB mode)
(see page 33, 39)
MODE button (see page 14, 15)
Switch between viewing DVB and
Analogue modes.
0
C
Exit the mode.
Text Hold / Picture Still button
(see page 36, 38)
Text Index button (see page 40)
Programme / channel change buttons (09) and Teletext page buttons.
(see page 38-40)
When in Standby mode, switches TV On.
VCR
Status button
Press to display status information for
the current Programme position.
(see page 33)
ASPECT
Volume up / down button
N
REC
PROGRAMME
VCR
DVD
N (Normalize) button
Resets all settings to their default levels.
Sound mute On / Off
ASPECT control button
(see page 35, 36)
VCR / DVD buttons
(see page 37)
IDTV
11
Using the On Screen Displays
Many features available on this TV can be accessed via the On Screen Display menu system. Use the remote
control as shown below to access and adjust features as desired.
The MENU button is used to open the main menus and
also to return to the previous menu.
MENU
MODE
OK
The up and down cursor buttons are used to move the
cursor and select menus.
The left and right cursor buttons are used to access menus,
adjust levels or to select from a range of options.
The OK button is used with a number of features to store
settings after adjustments have been made or options have
been set.
The EXIT button is used to exit the menu system and return
to the normal viewing screen.
An On Screen Help box is displayed whenever a menu is
displayed on the TV. This Help box indicates which buttons on
the remote control are used to navigate the menu shown, see
above for descriptions of button functions.
Note:
The Help box is not shown in the menu pictures in this
instruction book due to space limitations.
12
1
2
3
4
5
6
7
8
9
C
0
OK
N
EXIT
IDTV
Sound menu
Bass
Treble
Balance
NICAM
Mode
Ambience
Off
Music
Off
Select
Adjust
Exit
Return
ON SCREEN HELP
‘Instructions’ box
Picture menu
Press the MENU button.
MENU
MODE
Move to Picture menu.
OK
Access Picture menu.
Move to menu option.
1
2
3
4
5
6
7
8
9
C
0
Adjust chosen option or access chosen menu.
N
EXIT
Press the EXIT button at any time to go back to watching TV.
Viewing mode
The Viewing mode menu allows you to select three
different screen settings - Dynamic, Normal and
Cinema.
In each Viewing mode setting, Contrast, Brightness,
Colour, Sharpness, Tint (in NTSC only), Colour
balance, Colour management, P-NR, MPEG NR and
3D-COMB can be adjusted and stored to suit your
particular viewing requirement. (e.g., you may require
different settings for viewing sports, fi lms, news etc.)
Changes to any settings in a viewing mode will affect
all signal sources: RF, AV1, AV2, AV3 and Component.
Changes will be stored automatically.
By analysing and processing the incoming picture, all
three modes feature automatic enhancement.
Contrast, Brightness, Colour, Sharpness
Increase or decrease the levels of these options
according to your personal preference.
Tint
With an NTSC signal source connected to the TV, the
picture hue can be adjusted to suit your taste.
Colour balance
Allows you to set the overall colour tone of the picture.
Choose from Cool, Normal and Warm.
Main menu
P i c t u r e menu
Sound menu
Setup menu
Picture menu
Viewing mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour balance
Colour management
P-NR
MPEG NR
3D-COMB
Dynamic
Normal
On
Off
Off
On
Picture menu
Viewing mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour balance
Colour management
P-NR
MPEG NR
3D-COMB
Dynamic
Normal
On
Off
Off
On
Picture menu
Colour management Enables vivid colour adjustment automatically.
P-NR
Automatically reduces unwanted picture noise.
Not available during HD signal input.
MPEG NR
Reduces MPEG noise.
Allows you to choose from Off, Min, Mid and Max.
This function is effective in reducing the digital block noise
when viewing DVD, VCD or digital broad cast ing. The
effect will be changed based on the scene and image.
MPEG: Compression technology of the image signal
adopted by DVD, VCD or digital broadcasting.
3D-COMB
Not available in DVB mode.
Occasionally, whilst viewing still or slow moving
pictures, colour patterning may be seen. Set 3D-COMB
to On to display sharper and more accurate colours.
Displayed only when receiving PAL or NTSC signals.
Not displayed during RGB Video, S-Video and
component input mode.
Viewing mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour balance
Colour management
P-NR
MPEG NR
3D-COMB
Dynamic
Normal
On
Off
Off
On
13
Sound menu
Press the MODE button to select DVB or Analogue mode.
DVB
Analogue
MODE
MODE
MENU
Press the MENU button.
OK
Move to Sound menu.
Access Sound menu.
Move to menu option.
Adjust chosen option or access chosen menu.
1
2
3
4
5
6
7
8
9
C
0
N
EXIT
Press the EXIT button at any time to go back to watching TV.
IDTV
Bass
Increase or decrease level to enhance or minimise
lower, deeper sound output.
Treble
Increase or decrease level to enhance or minimise
sharper, higher sound output.
Balance
The levels of sound between the left and right speakers
can be adjusted to suit your listening position.
NICAM
Not available in DVB mode.
Select On to provide stereo sound reproduction. Select
Off for FM Mono sound output.
If Nicam Mono is being transmitted select either FM
Mono (Off), Nicam Mono I (M1) or Nicam Mono II (M2).
The options depend upon the signal being transmitted.
If reception deteriorates it is advisable to switch to FM
Mono (Off).
Analogue mode
Sound quality can be improved when watching music
scene or drama by selecting the appropriate Music
or Speech mode.
DVB mode
Mode
Ambience
14
Ambience provides a dynamic enhancer to simulate
improved spatial effects.
Main menu
P i c t u r e menu
Sound menu
Setup menu
Sound menu
Bass
Treble
Balance
NICAM
Mode
Ambience
Off
Music
Off
Sound menu
Bass
Treble
Balance
Mode
Ambience
Music
Off
Setup menu
Press the MODE button to select DVB or Analogue mode.
DVB
Analogue
MODE
MODE
MENU
Press the MENU button.
OK
Move to Setup menu.
Access Setup menu.
Move to menu option.
1
2
3
4
5
6
7
8
9
C
0
Adjust chosen option or access chosen menu.
N
EXIT
Press the EXIT button at any time to go back to watching TV.
Q-Link
Allows you to select which AV terminal is to be used
for data communication between this TV and a
compatible recording device. Choose from AV2 and
AV3. See page 34.
Main menu
P i c t u r e menu
AV2 / AV3 out
Offers a choice of signals to send to the Scart terminal
selected in the Q-Link option. You can choose from
the current TV (Analogue, DVB) programme position,
the signal entering AV1 / AV2 / AV3 or Monitor - the
picture displayed on screen.
Note: Component signal input cannot be output to
these Scart terminals.
Setup menu
Teletext
Allows you to choose between FASTEXT or List mode.
See page 38-40.
Off timer
Switches the TV off within a preset time which you can
choose from between 0 to 90 minutes in 15 minute intervals.
Side panel
Power save
Allows you to choose from Off, Low, Mid and High.
Do not display a picture in 4:3, 14:9, Picture and text
modes for an extended period, as this can cause an
Side panel
after-image to remain on the side
panels either side of the display field.
To prevent the appearance of such an
4:3
after-image, illuminate the side panels.
By reducing the brighness of picture, power
consumption can be lowered.
Sound menu
Analogue TV mode
Setup menu
Q-Link
AV2 out
Teletext
Off timer
Side panel
Power save
Power on preference
Tuning Menu
Owner ID
Shipping condition
AV2
Monitor
FASTEXT
Off
High
Off
TV
DVB mode
Setup menu
Q-Link
AV2 out
Off timer
Side panel
Power save
Power on preference
DVB Setup Menu
Owner ID
Shipping condition
AV2
Monitor
Off
High
Off
TV
AV mode
Setup menu
Q-Link
AV2 out
Teletext
Off timer
Volume correction
Side panel
Power save
Power on preference
AV2
Monitor
FASTEXT
Off
High
Off
TV
Power on
preference
Set to TV to view picture from TV tuner.
Set to AV to view input from an external equipment connected to a Scart socket, e.g. satellite receiver.
Note:
The external equipment must be switched on and sending a control signal for automatic
switching at power on to occur.
Tuning Menu
Provides access to many other features including Programme edit and Auto setup. See
page 17-19.
DVB Setup Menu
Provides access to setup the DVB operations. See page 23.
Owner ID
Allows you to enter a security code and address information. See page 21.
Shipping condition Allows you to clear all tuning information and reset all control levels back to factory settings.
See page 22.
Volume correction During AV mode, Volume correction is displayed. You can adjust volume level of AV mode.
Volume level is memorised.
15
Tuning menu – overview (Analogue mode)
In Analogue mode
MENU
MODE
Press the MENU button.
OK
Move to Setup menu.
1
2
3
4
5
6
7
8
9
C
0
Access Setup menu.
Move to Tuning Menu.
Access Tuning Menu.
N
Move to menu option.
Adjust chosen option or access chosen menu.
Press the EXIT button at any time to go back to watching TV.
Press the OK button after having adjusted some features to store
the new settings as the default (replacing the factory setting).
Programme edit
Access in order to customize your programme settings
(e.g., adding or deleting a programme position). See
page 17, 18.
Auto setup
Allows you to automatically retune the TV. Useful if
you move house and wish to retune your TV to the
local stations. See page 19.
IDTV
EXIT
OK
Main menu
P i c t u r e menu
Sound menu
Setup menu
Setup menu
Manual tuning
Allows individual programme positions to be tuned
manually. See page 20.
Q-Link
AV2 out
Teletext
Off timer
Side panel
Power save
Power on preference
Tuning Menu
Owner ID
Shipping condition
AV2
Monitor
FASTEXT
Off
High
Off
TV
Access
Tuning Menu
Access
Programme edit
Auto setup
Manual tuning
Programme edit
Prog.
1
2
3
4
5
:
:
:
:
:
Delete
16
Chan.
Name
Lock
CH44
CH51
CH41
CH47
CH37
ABC
XYZ
FTP
123
456
Off
Off
Off
Off
Off
Add
Move
Download
Tuning menu – Programme edit (Analogue mode)
In Analogue mode
MENU
MODE
Press the MENU button.
OK
Move to Setup menu.
Access Setup menu.
Move to Tuning Menu.
1
2
3
4
5
6
7
8
9
C
0
Access Tuning Menu.
N
Move to Programme edit.
Access Programme edit.
IDTV
Move to choose programme position (e.g., Prog. 3).
Make required change, e.g., moving a programme channel
(see the relevant procedure below).
EXIT
Press the EXIT button at any time to go back to watching TV.
Press the OK button after having adjusted some features to
store the new settings.
OK
Adding / deleting a programme channel
Move the cursor to the programme to be deleted or added.
Programme edit
Prog.
Press the Green button to add a programme channel to
the programme position, or the Red button to delete one.
Red
Green
1
2
3
4
5
:
:
:
:
:
Chan.
Name
Lock
CH44
CH51
CH41
CH47
CH37
ABC
XYZ
FTP
123
456
Off
Off
Off
Off
Off
Add
Cancel
Press the same button again to confirm your decision.
Moving a programme channel
Move the cursor to the programme to be moved.
Programme edit
Prog.
Press the Yellow button.
Yellow
Choose the new position for the programme channel.
1
2
3
4
5
:
:
:
:
:
Chan.
Name
Lock
CH44
CH51
CH41
CH47
CH37
ABC
XYZ
FTP
123
456
Off
Off
Off
Off
Off
Confirm
Cancel
Press the Yellow button again to confirm your decision.
17
Tuning menu – Programme edit (Analogue mode)
Renaming a programme channel
Move to the Name column.
Programme edit
Prog.
1
2
3
4
5
Choose the new character. The box at the bottom of the
screen shows the character currently selected.
:
:
:
:
:
Chan.
Name
Lock
CH44
CH51
CH41
CH47
CH37
XYZ
FTP
123
456
Off
Off
Off
Off
Off
ABCDEFGHIJKLMNOPQRST
UVWXYZ+-. 0123456789
Move to the next character position.
Continue until renaming is done.
Press the OK button to store the new name.
OK
Locking a programme channel
You may wish to lock a programme channel to prevent
access to it.
Programme edit
Prog.
1
2
3
4
5
Move to the Lock column.
:
:
:
:
:
Chan.
Name
Lock
CH44
CH51
CH41
CH47
CH37
ABC
XYZ
FTP
123
456
Off
Off
Off
Off
Off
Choose between Lock On or Lock Off.
Press the OK button to store the new setting.
OK
Note:
When a programme position is locked, Direct Channel
Access using the C and numeric buttons on the remote
control is not available.
Copying programme information to a recording device
You can copy programme information to a compatible
recording device connected to AV2 / AV3. See page 42 for
connection information.
Press the Download (Blue) button.
Programme data will now be sent to the recording device(s).
This might take a few seconds, depending on the number of
stations stored. If the message “Feature not available”
appears on the screen, the television is unable to send the
programme information to the recording device(s). See the
device’s instruction book for further information.
18
Download
(Blue)
DOWNLOAD IN PROGRESS
PLEASE WAIT
Programme : 63
Remote control unavailable
Tuning menu – Auto setup (Analogue mode)
Auto setup automatically retunes your TV. This feature is useful if, e.g., you move house and wish to retune your TV
to receive the local stations.
In Analogue mode
MENU
Press the MENU button.
MODE
OK
Move to Setup menu.
Access Setup menu.
Move to Tuning Menu.
1
2
3
4
5
6
7
8
9
C
0
Access Tuning Menu.
N
Move to Auto setup.
Access Auto setup.
IDTV
Press to start Auto setup.
OK
Notes:
• If you proceed with the next step analogue tuning data will be erased (all stations and their programme
positions stored in your TV’s memory will be wiped out so the new settings can be stored).
• If you exit the procedure after this point and before Auto setup is complete, no station information will be
stored. Restart and complete the Auto setup procedure so that the TV is retuned.
CH44
WARNING
All analogue tuning
data will be erased
Start Auto Setup
Exit
Return
AUTO SETUP IN PROGRESS
SEARCHING :
PLEASE WAIT
21
68
Exit
Return
The TV will search for, locate, store and then sort into order your local
stations.
If compatible recording device is connected via the AV2 / AV3 terminal,
programme data will be sent to the device via Q-Link. See page 34.
Once this operation is completed the TV will display the programme now
stored on programme position 1.
19
Tuning menu – Manual tuning (Analogue mode)
It is possible to retune individual programme positions:
MODE
In Analogue mode
MENU
OK
Press the MENU button.
Move to Setup menu.
Access Setup menu.
1
2
3
4
5
6
7
8
9
C
0
Move to Tuning Menu.
N
Access Tuning Menu.
Move to Manual tuning.
IDTV
Access Manual tuning.
Select the programme position to be tuned.
1
CH44
Press repeatedly until required station is found.
Manual tuning
When the desired station is found, press the OK button to store.
The programme position will flash.
Press the EXIT button at any time to go back to watching TV.
OK
21
EXIT
C
68
Search down/up
Store
Exit
Return
9 Direct entry
0
Note:
If your VCR is connected to this TV by an RF cable only, choose programme position “0” to tune to the VCR
signals.
Manual tuning (via front panel) (Analogue mode)
It is also possible to use the control panel buttons on the front of your TV to tune individual programme positions:
Press the F button until Tuning mode is reached.
Press the –/
or +/
button to access Tuning mode.
Press the TV/AV button to move between Change
programme and Search.
Press the –/ or +/ button to change programme
position or start search.
When the desired station is found, press the STR
button to store.
The programme position will flash.
1
CH44
Repeat above procedure to tune additional
programme positions.
Press the F button at any time to go back to watching
TV.
20
Manual tuning
-, +
TV / AV
STR
F
:
:
:
:
Search
Move cursor
To store
To exit
21
STR
68
F
-/
+/
TV / AV
Owner ID
Owner ID allows you to enter a security code(Owner ID) and personal details into its memory, so that in the
unfortunate event of theft it will help the police to trace the owner.
If you wish to check the personal details already entered into the TV
(except your PIN number), press the F button(Front panel) and hold
for 6 seconds(initially the volume level function will appear, as you
continue to hold down the F button it will disappear again, and the
Owner ID information will appear). The details already entered are
displayed on screen and will disappear after a few seconds.
If Owner ID information was not entered when you switched on your TV
for the first time or it is necessary to alter some of the information, Owner
ID can be re-accessed via the Setup menu.
MENU
MODE
Press the MENU button.
OK
Move to Setup menu.
Access Setup menu.
Move to Owner ID.
1
2
3
4
5
6
7
8
9
C
0
Access Owner ID.
N
If the Owner ID has previously been set, enter the PIN
NUMBER (using 0 to 9 on the remote control) followed
by OK to proceed, this will take you to the NAME option.
1
2
3
4
5
6
7
8
9
OK
IDTV
0
VCR
If no Owner ID has previously been set, enter the required
4 digit Owner ID PIN NUMBER (using 0 to 9 on the
remote control).
If a 4 digit PIN NUMBER was entered above, you will be
taken automatically to the NAME line.
1
2
3
4
5
6
7
8
9
0
VCR
Setup menu
Q-Link
AV2 out
Teletext
Off timer
Side panel
Power save
Power on preference
Tuning Menu
Owner ID
Shipping condition
If not, move to the NAME line.
AV2
Monitor
FASTEXT
Off
High
Off
TV
Access
Yo u n o w h a ve t h e o p p o r t u n i t y
to enter your details and
help the police crack cr ime
see instruction book
Change character.
Owner ID
PIN NUMBER
NAME
HOUSE NO
POSTCODE
Select character position.
:
:
:
:
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗
0123456789
Change character
Select character
Store Owner ID
Exit
Return
Repeat above until NAME, HOUSE NUMBER and
POSTCODE are entered.
Press the OK button to store the details.
Press again when you are asked, “Are you sure?”.
OK
For future reference,
write your PIN NUMBER here :
21
Shipping condition
Shipping condition allows you to reset the TV to its original condition, i.e. no channels tuned in.
This is useful, for example, if you move to a different area when you will probably want the TV to tune itself to your
new local stations.
Note:
Owner ID information will not be affected by this function.
This can be done either through the Shipping condition menu or through the Auto setup menu.
The Shipping condition menu will reset all data, except Owner ID information, clearing all DVB and Analogue
tuning information and resetting all control levels back to factory settings.
You may need to adjust your VCR or programme position ‘0’ VCR after operating the Shipping condition menu.
MENU
Press the MENU button.
MODE
Move to Setup menu.
OK
Access Setup menu.
Move to Shipping condition.
1
2
3
4
5
6
7
8
9
C
0
Access Shipping condition.
Press the OK button to start.
OK
N
Press again, to confirm, each time that you are asked, “Are you sure?”.
IDTV
Setup menu
Switch the TV off at the mains power switch.
The next time you switch the TV on, Auto setup will begin. DVB and
Analogue stations will be located, sorted and stored ready for use.
See page 9.
Q-Link
AV2 out
Teletext
Off timer
Side panel
Power save
Power on preference
Tuning Menu
Owner ID
Shipping condition
AV2
Monitor
FASTEXT
Off
High
Off
TV
Access
Shipping condition
All tuning data will be erased
Are you sure ?
Are you sure ?
Start
Exit
Return
22
DVB Setup Menu – overview (DVB mode)
In DVB mode
MENU
MODE
Press the MENU button.
OK
Move to Setup menu.
Access Setup menu.
Move to DVB Setup Menu.
1
2
3
4
5
6
7
8
9
C
0
Access DVB Setup Menu.
N
Move to menu option.
Adjust chosen option or access chosen menu.
Press the EXIT button at any time to go back to watching TV.
Timer
Programming
Allows you to enter programme times at which the DVB
tuner must switch on, ready for recording. See page
24.
Profile Edit
Allows you to select your favourite programme
positions and display them as a list in the TV Guide or
Information banner. See page 26.
Child Lock
You may wish to lock a DVB programme channel to
prevent access to it. See page 27.
DVB Tuning Menu Provides access to many other DVB Tuning features.
See page 28.
DVB System
Setup
Multi Audio
Provides access to various specialized DVB options.
See page 29.
Multi audio, which will only appear when a DVB
programme is selected, allows you to select an
alternative sound track. The number of options
available depends on each broadcast.
IDTV
EXIT
Main menu
P i c t u r e menu
Sound menu
Setup menu
Setup menu
Q-Link
AV2 out
Off timer
Side panel
Power save
Power on preference
DVB Setup Menu
Owner ID
Shipping condition
AV2
Monitor
Off
High
Off
TV
Access
DVB Setup menu
Timer Programming
Access
Profile Edit
Child Lock
DVB Tuning Menu
DVB System Setup
Multi Audio
eng
23
Timer programming menu (DVB mode)
For an external recording device to record DVB programmes, the integrated DVB system must be active to provide the
signal. The Timer programming menu allows you to choose programmes that you wish to record. At the correct time, the
DVB system will switch on and tune to the correct station (even if the TV is in standby mode). If the recording device is
compatible with Q-Link or similar technologies (see page 34) and connected to the TV’s AV2 / AV3 terminal, you do not
need to program the device – the DVB system will control the recording process.
The device must be connected to the TV’s AV2 / AV3 terminal using a SCART cable to record DVB programmes.
In DVB mode
MENU
MODE
Press the MENU button.
OK
Move to Setup menu.
Access Setup menu.
Move to DVB Setup Menu.
Access DVB Setup Menu.
1
2
3
4
5
6
7
8
9
C
0
Move to Timer Programming.
N
Access Timer Programming.
Press the OK button to begin programming.
OK
IDTV
Select the Programme position to be recorded.
Move to the Date field.
DVB Setup menu
Set the Date on which recording is to take place.
The current Date and Time are shown at the top of the menu.
See page 25 for further Date options.
Move to the Start time field
Move to the End time field
and set the Start time
and set the End time
.
The channel position, start and end times can also be input
using the numeric buttons on the remote control.
eng
Pos. Name
1
2
3
4
5
6
7
8
9
0
VCR
Move to the Subtitles field.
Thu 05/08/04 18:49
Date
Star t
End
min.
1
BBC1
6/8 FR
18:00
20:00
120 Off
3
ITV1
7/8 SA
21:30
22:30
60 Off
40
BBC News 24
8/8 SU
15:30
16:45
33
Boomerang
9/8 MO
23:10
24:30
80 Off
92
Kerrang!
10/8 TU
20:00
22:00
120 Off
46
The Community Channel 11/8 WE
19:30
21:30
120 Off
18
The Hits
12/8 TH
16:00
18:00
120 Off
5
Five
13/8 FR
19:00
20:00
60 Off
75 Off
Select timer
Edit timer
Exit
Return
Delete
If you wish to record subtitles (if available) select Auto.
Press the OK button to store.
Access
Profile Edit
Child Lock
DVB Tuning Menu
DVB System Setup
Multi Audio
DVB Timer Programming
.
The duration of the recording is shown in the min. column.
Timer Programming
0
9
OK
EXIT
Press the EXIT button to leave the DVB Timer Programming screen.
Notes:
• To delete a timer programme, select the recording with the cursor bar and press the Red button.
• To edit a previously entered timer programme, select it with the cursor bar and press the OK button.
• Timer programmes can also be entered from the TV Guide. See page 32.
Two minutes before the recording is due to start, a reminder will appear on screen:
Press the OK button to remove the reminder from the screen.
If you wish to cancel the recording, press the EXIT button.
OK
EXIT
Note: The above 2 operations will not be necessary if the TV set is in standby mode.
Notes:
Six seconds before the recording is due to start the DVB system will tune to the correct station. If you were already watching another
DVB station you will see the station change on screen. If you were watching an analogue channel, you will not see the change.
You can continue to watch analogue stations while a timer recording is in progress.
If you attempt to switch to another DVB programme position while a timer recording is in progress the message “DVB Tuner Locked ”
will be displayed. Press the OK button to continue recording, or EXIT to unlock the programme position. Beware that if you press EXIT,
timer programming for this DVB position will be immediately deleted.
To immediately cancel a recording that is already in progress, press GUIDE then EXIT.
You may not be able to cancel recording just before it starts. Use the recording device to cancel it.
24
Timer programming menu (DVB mode)
Daily and Weekly Timer Programmes
While in the Date field of the DVB Timer programming menu, you
can select various options to determine how often a recording
should be made. Press the down cursor button repeatedly to
access the following options:
Daily SU–SA
The recording device will record at the same time every day.
Daily MO–SA
The recording device will record at the same time each day
from Monday to Saturday.
DVB Timer Programming
Pos. Name
Thu 05/08/04 18:50
Date
Star t
End
min.
1
BBC1
6/8 FR
18:00
20:00
120 Off
3
ITV1
Weekly TH
21:30
22:30
60 Off
40
BBC News 24
8/8 SU
15:30
16:45
33
Boomerang
9/8 MO
23:10
24:30
80 Off
92
Kerrang!
10/8 TU
20:00
22:00
120 Off
46
The Community Channel 11/8 WE
19:30
21:30
120 Off
18
The Hits
12/8 TH
16:00
18:00
120 Off
5
Five
13/8 FR
19:00
20:00
60 Off
Change date
Select
Store timer
Exit
Return
Delete
0
75 Off
9
Daily MO–FR
The recording device will record at the same time each day
from Monday to Friday.
Weekly SA, FR, TH, WE, TU, MO or SU
The recording device will record at the same time on the same
day each week.
Notes:
• If new timer programme data overlaps any part of an existing timer programme, a warning message will appear.
• The TV set must be “On” or in “Standby” mode for the DVB programme signals to be output to the external
recording device.
Encrypted Programmes
In the future, some DVB programmes may be “encrypted”. This means that the DVB programme cannot be viewed
or recorded unless you have the correct Common Interface module to decode the programme.
When you attempt to view or set Timer recording of an encrypted programme and you have no CI module inserted,
a message will appear on screen.
25
Profile Edit menu (DVB mode)
The Profile Edit menu allows you to select your favourite programme positions and display them as a list in the TV
Guide or Information banner, to allow quick and easy access to the programs you watch most often.
You can make the 4 kinds of the list.
In DVB mode
MODE
MENU
Press the MENU button.
OK
Move to Setup menu.
Access Setup menu.
Move to DVB Setup Menu.
1
2
3
4
5
6
7
8
9
C
0
Access DVB Setup Menu.
N
Move to Profile Edit.
Access Profile Edit.
IDTV
DVB Setup menu
Add a channel to the Profile list
Move to the programme position which you wish to add to
the profile list.
Timer Programming
Profile Edit
Child Lock
DVB Tuning Menu
DVB System Setup
Multi Audio
Press the Red button repeatedly to cycle through the
channel categories.
Press the Green button repeatedly to cycle through the
profiles.
Press the Yellow button to add a channel to the profile list.
Press the Blue button to add all the channels to the profile list.
Access
eng
Profile Editor
All Services
Profile 1
1 BBC ONE Wales
2 BBC 2W
7 BBC THREE
10 BBC FOUR
30 CBBC Channel
31 CBeebies
40 BBC NEWS 24
Press the OK button to store your Profile list.
OK
Store
Exit
Return
Select Category
Edit the Profile list
When the profile list is highlighted
Press the Red button to edit the profile name.
Press the Green button to move the channel.
Press the Yellow button to delete the channel.
Press the Blue button to delete the all channels.
MENU
Press the MENU button to return to the DVB Setup Menu.
EXIT
Press the EXIT button at any time to exit Profile Edit.
GUIDE
A list of favourites can be accessed by pressing the GUIDE
button or the button.
See page 32.
26
Select programme
Select Profile
Add
Add All
Child Lock menu (DVB mode)
You may wish to lock a DVB programme channel to prevent access to it.
Note:
The data of the PIN number and locked channel will be erased by operating the Shipping condition.
In DVB mode
MENU
MODE
Press the MENU button.
OK
Move to Setup menu.
Access Setup menu.
Move to DVB Setup Menu.
1
2
3
4
5
6
7
8
9
C
0
Access DVB Setup Menu.
N
Move to Child Lock.
Access Child Lock.
When entering Child Lock menu for the first time, new PIN number
setting screen is displayed.
Create a 4-digit password.
Enter the password again to confirm.
From the second time, enter a password once to display Child
Lock screen.
IDTV
DVB Setup menu
Timer Programming
1
2
3
4
5
6
8
9
7
Profile Edit
Child Lock
DVB Tuning Menu
DVB System Setup
Multi Audio
Access
eng
0
VCR
Child Lock-PIN Entry
Please enter new PIN
PIN
Move to Child Lock Service List.
****
Child Lock
Change PIN
Child Lock Service List
Access Child Lock Service List.
Select the channel you want to lock and then press the OK button
to lock. Press again to unlock.
Press the Yellow button to lock all channels.
Press the Blue button to unlock all channels.
Access
Child Lock Service List
OK
1 BBC ONE Wales
2 BBC 2W
7 BBC THREE
30 CBBC Channel
51 BBCi
89 BBC Radio Wales
The PIN number is required when you wish to watch a locked
channel. If the unit is turned off it will be necessary to input the
PIN number again to access any locked channels.
90 BBC Radio Cymru
Select
Lock
Exit
Return
Lock All
Unlock All
Change the PIN number
In Child Lock menu
Move to Change PIN.
Access Change PIN.
Create a 4-digit new password.
Enter the password again to confirm.
1
2
3
4
5
6
7
8
9
0
VCR
27
DVB Tuning Menu (DVB mode)
DVB Tuning Menu provides access to DVB Tuning features.
In DVB mode
MENU
Press the MENU button.
MODE
Move to Setup menu.
OK
Access Setup menu.
Move to DVB Setup Menu.
Access DVB Setup Menu.
1
2
3
4
5
6
7
8
9
C
0
Move to DVB Tuning Menu.
N
Access DVB Tuning Menu.
IDTV
Move to menu option.
Adjust chosen option or access chosen menu.
EXIT
Press the EXIT button at any time to go back to watching TV.
DVB Auto Setup
Add New Service
Automatically retunes your TV. DVB stations will be
located, sorted into order and stored.
DVB tuning data will be erased.
If you set the Child Lock PIN number, the number is
required before DVB Auto Setup.
You can add new DVB stations while retaining existing
tuning data. When the New Services Found message
appears new DVB stations are available to add to your
existing DVB channel list.
DVB Setup menu
Timer Programming
Profile Edit
Child Lock
DVB Tuning Menu
DVB System Setup
Multi Audio
Signal Quality
28
This TV continually scans for updated DVB services
and notifies you of any changes. Set to On to receive
notification. Set to Off if you do not wish to be informed
of any updates.
The signal quality function displays an indication of
signal quality for each DVB programme position.
The DVB system requires a good quality signal to
provide the best picture. When viewing analogue
pictures, interference such as signal reflection from
nearby buildings or mountains causes ‘ghosting’, but
still provides a viewable picture. For the DVB system,
interference such as this can disrupt the flow of data
causing the picture to appear to be made up of large
blocks, or to freeze intermittently. If the picture
disappears completely, this could mean that signal
quality is very poor. If this happens often, you may
need to improve your aerial system to provide a better
signal.
eng
DVB Tuning Menu
Access
DVB Auto Setup
Add New Service
New Service Message
Signal Quality
DVB Aute Setup
Please Wait !
New Service
Message
Access
On
21
Prog. Channel Service Name
68
NetID.
TS ID. Quality
4
30 BBC NEWS 24
12302
4158
9
5
30 BBCI
12302
4158
9
6
30 CBBC Channel
12302
4158
9
7
30 BBC Radio Wales
12302
4158
9
8
30 BBC Radio Cymru
12302
4158
9
This will take about 3 mins.
Add New Services
Please Wait !
Prog. Channel Service Name
21
68
NetID.
TS ID. Quality
This will take about 3 mins.
New Service Message On
New DVB Service Found!
Press OK to add new service
Press EXIT to lgnore
DVB System Setup (DVB mode)
The DVB System Setup menu provides access to DVB specific options.
In DVB mode
MENU
Press the MENU button.
MODE
OK
Move to Setup menu.
Access Setup menu.
Move to DVB Setup Menu.
1
2
3
4
5
6
7
8
9
C
0
Access DVB Setup Menu.
N
Move to DVB System Setup.
Access DVB System Setup.
IDTV
Move to menu option.
Adjust chosen option or access chosen menu.
Press the EXIT button at any time to go back to watching TV.
Pressing the OK button after having adjusted some features will store
the setting as the default (replacing the factory setting).
Common Interface The Common Interface Module menu provides access
Module
to functions contained on a Common Interface Module
inserted into the CI slot, located at the rear of the TV.
See page 30.
Preferred Subtitles This option allows you to select the language in which
subtitles should appear (if available) when the STTL
button is pressed.
System Update
This menu allows you to download new software to
the television. See page 31.
Display Timeout
This option allows you to set how long the information
banner stays on screen. Select from 0 (No display) to
10 seconds in 1 second increments. See page 33.
EXIT
OK
DVB Setup menu
Timer Programming
Profile Edit
Child Lock
DVB Tuning Menu
DVB System Setup
Multi Audio
Access
eng
DVB System Setup
Common Interface Module
Preferred Subtitles
System Update
Display Timeout
Access
English
3 seconds
29
Common Interface Module menu (DVB mode)
The Common Interface Module menu provides access to software contained on Common Interface (CI) Modules.
These can be inserted in the “CI” slot located at the rear of the TV.
IMPORTANT NOTES:
• Switch off the TV using the front panel switch before inserting or removing a module.
• If you are installing a TV software update, please follow the dedicated instructions supplied with the module.
• Insert / remove a module straightly to the CI slot.
Insert the CI module:
Some Common Interface Modules may be a two piece design consisting
of a card reader together with the viewing card. When using this design
of card, first insert the card reader firmly into the CI slot on the TV.
Secondly, insert the viewing card into the reader.
Switch on the TV.
In DVB mode
MENU
Press the MENU button.
MODE
OK
Move to Setup menu.
Access Setup menu.
Move to DVB Setup menu.
1
2
3
4
5
6
7
8
9
C
0
Access DVB Setup menu.
N
Move to DVB System Setup.
Access DVB System Setup.
IDTV
Move to Common Interface Module.
Access Common Interface Module.
Access the module.
If no module is inserted the message “No Module Inserted” will be
displayed.
(If you have inserted a module, check that it is fully inserted.)
The features that now appear on screen are dependent on the contents
of the selected Common Interface Module.
Refer to the instructions supplied with the card or contact the vendor.
DVB System Setup
Common Interface Module
Preferred Subtitles
System Update
Display Timeout
If you see the
Slot 1: No module inserted
OK
symbols, use the cursor keys.
If you see a line of key words displayed in red, green, yellow and blue,
use the coloured buttons to operate the functions.
EXIT
The EXIT button should always allow you to exit the CI software.
30
English
3 seconds
Common Interface
In all cases, it is possible to navigate the pages using buttons on the
remote control, but because the commands available must apply to all
manufacturers of DVB equipment, some on screen commands may not
correspond exactly to the remote control buttons.
For example:
For the on screen command ‘select’ or ‘go’, use the OK button.
Access
Access
System Update menu (DVB mode)
From time to time new versions of software will become available to enhance the performance and features of this TV.
Auto Update Search in Standby (Overnight)
During the night time, this TV will automatically search for any new available software being broadcast. If a new
software version is found, the unit will automatically download and install this new version. At the end of this
process the unit will reset. Auto Update Search in Standby will occur at 03:00 or 05:00 every day.
In DVB mode
Press the MENU button.
MENU
MODE
Move to Setup menu.
OK
Access Setup menu.
Move to DVB Setup Menu.
Access DVB Setup Menu.
1
2
3
4
5
6
7
8
9
C
0
Move to DVB System Setup.
N
Access DVB System Setup.
Move to System Update.
DVB System Setup
Access System Update.
Common Interface Module
Preferred Subtitles
System Update
Display Timeout
Move to Auto Update Search in Standby.
English
Access
3 seconds
Choose between On or Off.
Set to On to search for new software and update
automatically in Standby mode. This does not work
when the unit off.
If there is a new version software being broadcast,
the TV will download this automatically.
Auto Update Search in Standby will only occur if:
• The unit is in Standby mode
• No timer recording is set for 03:00 or 05:00(GMT)
• No recording is being made at 03:00 or 05:00(GMT)
Set to Off if you do not want new software to be
automatically downloaded. In this case a new software
banner will appear when the TV set is switched on and
tuned to a BBC channel, if new software is being broadcast.
Press the OK button to download the new version.
The TV will begin download of the new software version.
This can take up to 15 minutes.
Press the EXIT button to exit without download.
New version 1.00 found.
Do you really want to update the software and reboot the system?
To ensure that your TV automatically updates when new software is available, please place the TV in
Standby last thing at night when you have finished viewing.
System Update Search Now (Manual Download)
To manually check if a new software version is available, select System Update Search Now in System Update
menu and press the OK button.
The TV will search for new versions of software and indicate whether a newer version is available or not. This
search process may take a few minutes.
If a newer software version is found, an on screen message will inform the user that it is available. The user is given
the chance to download this version.
Press the OK button to download the new version.
The TV will begin download of the new software version. This can take up to 15 minutes.
Press the EXIT button to exit without download.
System Update
Please do not switch off the TV or press any buttons while this download
is in progress. The TV will reset after the software download is complete.
Searching for new software version: Please wait!
Current software version 0.30
Press the MENU button to return to DVB System Setup menu.
Press the EXIT button to exit from menus.
Software Licence
Access to show the information of the Software Licence.
Exit
Return
31
TV Guide - Electronic Programme Guide (EPG) (DVB mode)
The DVB TV Guide displays the current programmes being transmitted, and forthcoming programmes on each
DVB channel, up to about one week ahead (If broadcasters transmit the programmes information).
When you are using the TV for the first time or you have not used it for about one week, it takes thirty to forty
minutes after turning the TV on to display the TV Guide fully.
Press the GUIDE button.
Choose from Landscape or Portrait display style by pressing
the GUIDE button repeatedly.
GUIDE
MODE
OK
Press the Red button to move the EPG listing to the previous day.
Press the Green button to move the EPG listing to next day.
Press the Yellow button to view a list of Categories.
The Favourites list can be customised using the Profile Edit
menu. See page 26.
Press the Blue button to view a list of Prog. type.
1
2
3
4
5
6
7
8
9
C
0
Landscape
DVB TV Guide :Landscape
EPG listing can be set to display by Category or Programme
Type. For example press the Yellow button and select ‘Free
TV’, ‘Radio’ services or ‘Profile 1’ by pressing the up or down
cursor buttons. Press the OK button to view a list of the selected
category.
To view any of the current DVB programmes, select it with the
cursor buttons and press the OK button.
Thu 05/08/04 18:50
Category
All Services
Fri 6th
Prog. type
All Types
20:00-21:00 Coronation Steet:We open in the Battersdy’s
20:30
21:00
Time: 19:30
20:00
Eastender DIY SOS
The Bill
2 BBC2
Hot Wars
Hollday Program
21 ITV1
OK
OK
21:30
1 BBC1
Emmerdal. Coronation Street
44 Channel4 10 O’ clock News BBC
Red Cap
So
The Bill
Pepsi Char. Good bye Hell
122 five
Panoroma Sex And The City
Terminator
142 ITV2
I’m A Celebrlty
News
144 SC4
Rugby
Pop Idol
Change display mode
Select channel
Select Programme
Timer Programming
Exit
-24 Hr
+24 Hr
The
The Bill
15 To1
Page up
Info
Page down
Category
Prog. type
Portrait
DVB TV Guide : Por trait
Information and Timer Programming (ex. Landscape)
You can view further information about the selected programme:
Select the programme for which you require further information
using the cursor buttons.
Press the button to display the information.
Press the button again to return to the list of programmes.
Wed 12/05/04 10:46
Wed 12th
1 BBC1
19:30~20:00
2 BBC2
Eastender
20:00~21:00
Hot Wars
21:00~22:00
Emmerdal.
22:00~22:30
10 O’clock News BBC
22:30~23:00
Panoroma
22:30~23:30
I’m A Celebrlty
23:30~00:00
Rugby
23:40~23:55
44 Channel4
The Bill
Change display mode
Select Programme
Select channel
Timer Programming
Exit
+24 Hr
Page down
Category
Prog. type
Wed 12/05/04 10:46
Category
All Services
Prog. type
All Types
20:00-21:00 Coronation Steet:We open in the Battersdy’s
21:00
Time: 19:30
2 All Services
OK
MENU
Press the MENU button to return to the TV Guide.
Press the EXIT button to exit the Guide.
444 SC4
Page up
Info
DVB TV Guide :Landscape
Wed 12th
When you select a future programme from the EPG listing, press
the OK button to set timer programming for recording on a
Q-Link compatible recorder. See page 24, 25, 34.
Prog. type
All Types
Category
All Services
BBC1
1 BBC1
Eastender D Free TV
BBC2
2 BBC2
Hot Wars
ITV1
21 ITV1
Emmerdal. C Radio
21:30
Red Cap
So
Pay TV
The Bill
Channel4
44 Channel4 10 O’ clock me
Information
Good bye Hell
five
122
five
Terminator
ITV2
142
ITV2
Panoroma S Profile 1
I’m A Celebr
SC4
144
SC4
Rugby
The Bill
News
Profile 2
1
Profile 3
The
Profile 4
EXIT
Select
Enter
Exit
-24 Hr
Category
Return
+24 Hr
DVB TV Guide :Landscape
Wed 12/05/04 10:46
Category
All Services
Wed 12th
Prog. type
Prog. type
All Types
20:00-21:00 Coronation Steet:We open in the Battersdy’s
All
Types
Time: 19:30
20:00
21:30
21:00
Eastender DIY SOS
The Bill
2 BBC2
Hot Wars
Hollday Program
News
21 ITV1
Emmerdal. Coronation Street
21:30
Movies
Red Cap
1 BBC1
So
The Bill
Enter
tainment
122 five
Goodt bye Hell
Pepsi Char. Spor
Panoroma Sex And The City
Terminator
Children’s
142 ITV2
I’m A Celebrlty
144 SC4
Rugby
44 Channel4 10 O’ clock News BBC
15 To1
Pop Idol
News
Education
The
The Bill
Lifestyle
Drama
Select
Enter
Exit
Return
32
Information banner
In DVB mode
MODE
Information banner will appear when changing channel, or pressing the (Information)
button. The banner gives the user information about the channel and programme currently
being viewed. The banner will time out and dissapear from the screen after a set time
period, this time period can be set in the DVB System Setup menu. See page 29.
Current Channel
Current Programme
Now or Next
1 BBC ONE WALES
Corontation Street
20:00~20:55
Now
Encrypted
Multi-Audio
OK
Current Time
Current Category
20:30
Profile 1
Change Category
For info press
Subtitle
TXT
1
2
3
4
5
6
7
8
9
C
0
N
Programme Duration
Features Available
Press the left or right cursor button while banner is displayed to switch between Now and Next.
1 BBC ONE WALES
Corontation Street
20:00~20:55
Now
Encrypted
Multi-Audio
20:30 Profile 1
Change Category
For info press
Subtitle
TXT
1 BBC ONE WALES
News
20:55~21:00
Next
20:30 Profile 1
Change Category
For info press
This switches between the information for the current Programme being shown (Now)
and the next Programme to be shown (Next).
Press the up or down cursor button to step through the banner information for all channels.
Press the OK button to view a channel. Now and Next can also be used in this mode.
While the banner appears
Press the button to display an extended banner showing any information available on
the current selected programme.
Press the button while in extended banner mode to return to normal banner view.
To clear the banner from the screen while in extended banner mode, press the EXIT button.
Viewing Category
Press the Blue button while in the banner to scroll through available categories.
All Services : All available Services
For example:
TV : TV channels only
All Services
TV
Radio : Radio channels only
User Profiles
Radio User Profiles : 4 individual Profiles set up by user (see page 26)
Press the EXIT button to exit the banner at any time.
IDTV
OK
EXIT
Blue
EXIT
In Analogue mode
Pressing the (Information) button will display the analogue channel information for a
few seconds. This will then be timed out to display just the programme position number
near the top left corner of the screen.
To remove this programme position number, press the (Information) button again.
Subtitles ON / OFF (DVB mode)
In DVB mode
STTL
MODE
Press the STTL button to switch Subtitles ON.
Subtitles will appear (if available) by the language you select in Preferred Subtitles in
DVB System Setup menu. See page 29.
Press again to switch Subtitles OFF.
OK
1
2
3
4
5
6
7
8
9
C
0
33
Q-Link
Q-Link allows the television to communicate with a compatible VCR or DVD Recorder.
For Q-Link communication to work, the TV must be connected to a recording device with the “Q-Link”, “NEXTVIEWLINK”,
“DATA LOGIC”, “Easy Link”, “Megalogic” or “SMARTLINK” logo using a “fully wired” Scart cable between the AV2 / AV3
terminal of the television and the appropriate terminal on your VCR or DVD Recorder. See page 15 for details of Q-Link
terminal setup. This television does not support any other types of recording control signal.
For connection to the appropriate Scart terminal on the recording device, refer to the device’s instruction book.
When using a “NEXTVIEWLINK” device the main features possible are the following :
Preset Download
This allows the programme order from the TV to be downloaded to the recording device, helping to ensure that correct
recordings are made; there are several ways to perform this operation :
1. During installation as explained in the “Quick Start Guide” on page 8-10.
2. When Auto setup is started from within the Tuning menu. See page 16.
3. Preset download started from the recording device, refer to the device’s instruction book.
Because a recording device cannot tune to DVB stations, only the analogue programme positions are downloaded to the device.
What You See Is What You Record (DIRECT TV RECORDING)
This will allow the immediate recording of the programme currently shown on the TV, by the recording
device attached to the Scart terminal, which can be chosen using “Q-Link”. See page 15.
MODE
Press the DIRECT TV REC button.
DIRECT
TV REC
OK
If the recording device is in Standby mode with usable recording media inserted, it will automatically switch
on when you press the DIRECT TV REC button.
If a “Q-Link” device is connected, a message will appear on the TV screen showing what is being recorded,
or if it is not possible to record. Some “Q-Link” compatible devices will only display the message when on
the VCR programme position(0) or in AV mode. Refer to the device’s instruction book.
Recording in progress
The recording device is recording the programme signal
from its own tuner. If you wish you can switch off the TV
and leave the device recording in the normal way.
1
2
3
4
5
6
7
8
9
C
0
No recording -Check tape or disc
The tape or disc may have been “write protected”, missing
or may be damaged. The device may already be recording.
Refer to the device’s instruction book.
Recording DVB stations
If you press the DIRECT TV REC button while watching a DVB station, the recording device will automatically switch to its
AV input to record the DVB signal from the TV (via the SCART cable), and the DVB programme position will be locked. If
you attempt to select another DVB programme position while recording, you will see the message “DVB Tuner Locked”.
Press the OK button to clear the message, or the EXIT button to unlock the programme. Beware that if you press EXIT,
the DVB programme will be unlocked – switching to another DVB programme will spoil your intended recording. Stop the
recording manually.
Additionally, when using a “Q-Link” device the following main features are possible:
The following features are only available from the device connected to the Scart terminal selected using “Q-Link”. See
page 15.
TV / Recording device Auto Power On
If you insert pre-recorded media into the recording device and press the Play button whilst the TV is in Standby mode, the
TV will automatically switch on and select the correct AV input so that you can view the content.
Recording device Auto Power Standby
When the TV is switched into Standby mode, the recording device will also switch into Standby mode if there is no media
inserted, or if there is media inserted and the device is in Rewind or Stop mode. If a VCR is rewinding a tape, it will not
switch into Standby mode until rewinding has finished.
Recording device Image View On
If the TV is in Standby mode and the recording device sends a menu to be displayed on the TV screen (e.g., Main menu),
the TV will automatically switch On and the menu will be displayed.
This TV will also communicate with other recording device’s that bear the following logos :
• “DATA LOGIC” (a trademark of Metz Corporation) • “Megalogic” (a trademark of Grundig Corporation)
• “Easy Link” (a trademark of Philips Corporation)
• “SMARTLINK” (a trademark of Sony Corporation)
Important Note:
Some recording devices may not support all or some of the above functions. Refer to the instruction book for the device.
If Q-Link functions do not work, check the connection and ensure that the scart lead is a fully-wired type.
34
Aspect Controls
The Widescreen TV will allow you to enjoy viewing the picture at its optimum size and aspect, including widescreen
cinema format pictures.
Press the ASPECT button repeatedly to move through the seven
aspect options:
ASPECT
MODE
OK
Panasonic Auto, 16:9, 14:9, 4:3, Zoom1, Zoom2 and Zoom3
OR
Press the ASPECT button. Whilst the on screen selector keys
are displayed, use the Red or Green buttons to move in either
direction through the seven aspect options.
Note:
This is not available for 720p and 1080i component signals input.
Aspect is fixed to 16:9.
Panasonic Auto
Red
1
2
3
4
5
6
7
8
9
C
0
Green
N
WIDE
Panasonic Auto determines the best aspect ratio to use to fill your screen.
It does this using a four step process to determine if the picture being
viewed is a widescreen picture.
If Panasonic Auto detects a widescreen signal it switches into the
appropriate widescreen mode. If Panasonic Auto does not detect a
widescreen signal then this advanced TV set enhances the picture for
optimum viewing pleasure.
“WIDE” appears in the top left of
the screen, Panasonic Auto
switches to the appropriate 16:9 or
14:9 widescreen ratio.
The text shown on the screen indicates how Panasonic Auto determined
which ratio to use:
Panasonic Auto switches to the appropriate widescreen ratio.
“Panasonic Auto” appears in the top left of the screen if black stripes
above and below the picture are detected.
Panasonic Auto chooses the best ratio and expands the picture to fill
the screen. This process can take several minutes, depending on the
darkness of the picture.
You may prefer to manually select one of the other aspect options available
to view the picture.
Notes:
• If, in Panasonic Auto mode, you experience problems with the screen
display size when playing back widescreen format recordings from your
VCR then it is possible that the tracking control of your VCR requires
adjustment (your VCR instruction book will contain adjustment details).
• The widescreen aspect ratios of different films and programmes can
vary.
If these are wider than a standard 16:9 aspect picture then a black
band may be visible at the top and bottom of the screen.
• “WIDE” will appear in the top left corner of the screen and picture aspect
changes accordingly in any aspect modes, if a widescreen identification
signal (WSS) is detected or a control signal is found through a Scart
terminal.
• Automatic aspect ratio adjustment by WSS signal is not available for
progressive and high definition component signals input.
Panasonic Auto
“Panasonic Auto” appears in the top
left of the screen. The best ratio is
chosen and the picture expanded
to fill the screen.
Panasonic Auto
Press the ASPECT button, then
use the Red or Green buttons to
move in either direction through the
seven aspect options.
35
Aspect Controls
16 : 9
16 : 9
16:9 will display a true 16:9 (anamorphic) picture with no aspect
distortions.
16 : 9
14 : 9
14 : 9
14:9 will display a 14:9 picture at its standard 14:9 size without any
stretching.
14 : 9
4:3
4:3
4:3 will display a 4:3 picture at its standard 4:3 size with no aspect
distortions.
4:3
Zoom1
Zoom1
Zoom1 will display 16:9 letterbox or 4:3 pictures with no aspect
distortions.
Zoom1
Zoom2
Zoom2
Zoom2 will display 16:9 anamorphic letterbox pictures as a full screen
display with no aspect distortions.
Zoom2
Zoom3
Zoom3
Zoom3 will display 21:9 letterbox pictures as a full screen display with
no aspect distortions.
16:9 will display the picture at its maximum size but with sligth stretching.
Zoom3
Still
Press the HOLD button to freeze the picture.
Press again to return to watching the current programme.
HOLD
MODE
OK
36
1
2
3
4
5
6
7
8
9
C
0
VCR / DVD operation
The Remote Control is capable of operating some functions of selected Panasonic VCRs and DVD (Digital Versatile
Disc) equipment. Some VCR and DVD equipment have different functions, so to ensure compatibility please refer
to the equipment’s instruction book or consult your dealer for details.
Standby
Press to switch the VCR, DVD or DVD recorder to Standby
mode.
Press again to switch back on.
DVB DIRECT
Analogue TV REC
MODE
GUIDE
TV/AV
VCR
DVD
VCR / DVD switch
Use this switch to select whether controls operate the DVD
equipment or VCR.
OK
MENU
EXIT
Play
Press to playback the tape or DVD.
TEXT STTL INDEX HOLD
Stop
Press to stop the tape or DVD.
1
2
3
4
5
6
7
8
9
Skip / Fast Forward / Cue
VCR: Press to fast forward the tape. In Play mode, press
to view the picture rapidly forward (Cue).
When fast forwarding the tape, the picture noise may
occur.
DVD: Press to skip to the next track or title.
Press and hold to search forward.
0
C
VCR
Skip / Rewind / Review
VCR: Press to rewind the tape. In Play mode, press to
view the picture rapidly in reverse (Review).
DVD: Press to skip to the previous track or title.
Press and hold to search backward.
ASPECT
N
REC
VCR
DVD
PROGRAMME
Pause / Still
Press in Play mode, the picture will pause.
Press again to restart play.
DVD: Press and hold for slow-motion play.
IDTV
PROGRAMME
REC
Programme Up / Down
Press to increase or decrease the programme position by
one.
Record
Press this button to start recording.
37
Teletext operation
In Analogue mode
• Teletext features may vary depending on the Broadcasting Companies and is only available if the channel selected
is transmitting Teletext.
• Pressing the MENU button whilst in Teletext operation will display the contrast function with a cyan bar, press the
left and right cursor buttons to alter the setting as required.
• Pressing the MENU button whilst in Teletext operation will display special function options at the bottom of the
screen.
• Pressing the Volume up / down button whilst in Teletext operation will display the volume function with a green
bar, press the volume up / down button to alter the setting as required.
What is List mode ?
In List mode, four differently coloured page numbers are situated at the bottom of the screen. Each of these
numbers can be altered and stored in the TV’s memory.
What is FASTEXT mode?
In FASTEXT mode, four differently coloured subjects are situated at the bottom of the display. To access more
information about one of these subjects, press the appropriately coloured button. This facility enables fast access
to information on the subjects shown.
TV / Teletext mode
Press the TEXT button repeatedly to switch the mode.
Each time you press the button: Teletext mode
TEXT
Picture and text mode
(see page 40)
Current TV programme
1
2
3
4
5
6
7
8
9
0
Page Selection
Pages can be selected in two ways :
a. Press the Up / Down cursor buttons to increase or decrease the page number by one.
b. By entering the page number, using 0 - 9 on the remote control.
VCR
MENU
Green
MENU
Red
Full / Top / Bottom
Press the MENU button to display special functions, followed by the Green button.
Press the Green button again to expand the BOTTOM half.
Press again to return to normal (FULL) size.
Reveal
Press the MENU button to display special functions, followed by the Red button to
reveal hidden words e.g. quiz page answers. Press again to hide.
Red / Green / Yellow / Blue buttons
In FASTEXT mode they correspond to the differently coloured subjects.
In List mode they correspond to the differently coloured page numbers.
1
2
3
4
5
6
7
8
9
OK
List Store
In List mode the four page numbers can be altered (programme positions 1 - 25 only).
To do this, press one of the four coloured buttons and enter the new page number.
Press and hold the OK button, the page numbers will change to white indicating that
the page is stored.
0
VCR
HOLD
38
HOLD
To hold the Teletext page when viewing multi-page information.
Press again to return to automatic page update.
Teletext operation
It is not possible to change the programme position when in News flash, Update or Sub Coded Page Access operation.
Blue
1
2
3
4
5
6
7
8
9
0
VCR
Favourite Page (F.P.)
Stores a favourite page in memory for instant recall. To store such a page, the TV must
be in List mode, and the programme position must be from 1 - 25.
STTL Press the Blue button, select the page number, then press and hold the OK button. The
page number is now stored.
Press STTL to recall this page.
MENU
Yellow
OK
Update Display
Press the MENU button to display special functions, followed by the Yellow button to view
the TV picture whilst searching for a Teletext page (this is not necessary in Picture and text
mode, as the picture is displayed on the left of the screen). When found, the screen will
display the page number at the top left. Press the Yellow button to view the page.
Press the TEXT button again to return to normal TV operation.
News Flash
When a news flash page has been selected, press the MENU, Yellow buttons, to view
the TV picture. When an update is received, the page number will be displayed on
screen.
Press the Yellow button to display the News Flash.
Press the TEXT button to return to normal TV operation.
Update
Press the MENU, Yellow buttons to see the update of information on certain pages.
When an update is received, the page number will be displayed at the top left of the
screen.
Press the Yellow button to view the page.
Press the TEXT button to return to normal TV operation.
Accessing sub pages
When Teletext information exceeds one page, it may take some time for the automatic
changing of the sub pages to reach the sub page you require. As each sub page is
found its number is displayed at the top of the page so that you may select it; as more
sub pages are picked up, the display at the top of the page changes, so that you are
always offered the most recently transmitted selection of sub pages.
1
2
3
4
5
6
7
8
9
0
VCR
MENU
Yellow
In Teletext operation, use the following procedure to access sub pages:
If the sub page you want to look at is not yet available, press the MENU button (to
display special functions) followed by the Yellow button to view the TV picture whilst
waiting for more sub pages to be found. The sub pages found will be displayed across
the top of the screen.
When the sub page you are waiting for is available press the Yellow button to return to
viewing the Teletext pages, then use the left and right cursor buttons to select the sub
page of your choice.
The maximum number for sub page that can be entered is restricted to 79 by broadcasters.
Notes:
• If you do not want to display the on screen selector keys on the TV picture whilst
waiting for a sub page to be found, press the MENU button to clear the keys from the
screen. Press again to redisplay the keys.
• If you have cleared the special function keys from the screen and then used the left
and right cursor buttons to select a sub page, whilst still viewing the TV picture, you
must press the MENU button then the Yellow button to display the Teletext page again.
• If the top of the page indicates that sub pages are being transmitted but the page
displayed never changes, then the ‘sub page number’ is there to show the page contents
have been updated, there are no sub pages.
39
Teletext operation
MENU
Blue
Alternatively, if you know which sub page you require, press the MENU button (to display
special functions) followed by the Blue button; T**** will be displayed where the page
number is normally found.
Enter desired sub page number before the T**** disappears.
e.g., to select page 6 enter 0, 0, 0 and 6.
Press the Yellow button to view the TV picture whilst waiting for more sub pages to be
found. The sub pages found will be displayed across the top of the screen.
When the page is available, press the Yellow button to view the page. Regardless of
how many pages are found, pressing the Yellow button will take you to the sub page
which you requested.
Press the TEXT button to return to normal TV operation.
INDEX
When in FASTEXT operation
Press the INDEX button to return to the main index page.
Depending on the way information is transmitted, this may have to be pressed more
than once to return to the main index page.
INDEX
Picture and text
Press the TEXT button to enter Picture and text mode.
Picture and text mode lets you see the current programme and a page of teletext side
by side. Whilst using this feature, the remote control affects the teletext page; if you
wish to make changes to the programme viewed press the TEXT button to return to
watching the programme on its own then make the desired changes.
TEXT
In DVB mode
DVB teletext services
DVB teletext services differ greatly from analogue teletext. When you switch to a DVB
teletext service, the images you see can contain graphics and text, laid out and controlled
in a manner decided by the broadcaster. In all cases, it is possible to navigate the
pages using buttons on the remote control, but because the commands available must
apply to all manufacturers of DVB equipment, some on screen commands may not
correspond exactly to the remote control buttons.
OK
1
2
3
4
5
6
7
8
9
0
VCR
TEXT
For example:
• For the on screen command ‘select’ or ‘go’, use the OK button.
symbols, use the appropriate CURSOR keys.
• If you see the
• If you see a line of key words displayed in red, green, yellow and blue, use the coloured
multifunction buttons to operate the functions.
• For numbered options, use the numeric keypad.
• The TEXT button should allow you to exit the teletext system. Alternatively, press the
Channel up / down buttons to select another channel.
As soon as you switch to a DVB channel with links to a teletext service, software is
downloaded in the background to enable the teletext function. This means that when
switching to a DVB channel, you should wait for approximately 5 seconds before pressing
the TEXT button – this will allow the software to download. If you press the TEXT button
before download is complete, there will be a short delay before the text screen is
displayed.
While navigating DVB teletext, you will find there is a short delay when moving between
pages while the page downloads.
There is often a prompt shown somewhere on the page (for example “Loading”) to let
you know what is happening.
40
Audio / video connections
It is possible to connect a variety of additional equipment to this TV. The following pages detail how to connect
external equipment to the rear of the TV.
Once your equipment is connected, use the following procedure to view the input:
While viewing a TV channel
Press the TV/AV button.
Whilst the on screen selector keys are displayed, press coloured
buttons to select the AV source you wish to view.
Red button
: AV1 Scart terminal
Green button : AV2 Video, S-Video Scart terminal
Yellow button : AV3 Video, S-Video Scart terminal
Blue button : Component terminals
The on screen selector keys will disappear after a few seconds. If
you want to select an input when the keys are not shown, press
any one of the coloured buttons and the keys will reappear.
Notes:
• You can also select an AV source using the TV/AV button
on the front panel of the TV.
Press the TV/AV button repeatedly until you reach the AV
source you wish to view.
• When in AV mode a reduced number of options are available
in the Sound and Setup menus (e.g., in the Setup menu
there is no Tuning Menu option).
TV/AV
MODE
OK
1
2
3
4
5
6
7
8
9
C
0
N
IDTV
41
Audio / video connections
How to connect the Audio Output terminals
Example:
COMPONENT
AUDIO
AUDIO
IN
L
L
R
R
Amplifier to Speaker System
AUDIO
VIDEO
L
L
Y
R
R
PB
AUDIO
IN
PR
AUDIO
OUT
RGB
VIDEO
AV1
VIDEO
AV2
AV3
VIDEO
S-VIDEO
RGB
S VIDEO
How to connect the AV1 / 2 / 3 Scart terminals
Example:
COMPONENT
AUDIO
AUDIO
VIDEO
L
L
Y
R
R
PB
AUDIO
IN
PR
RGB
VIDEO
AV1/2/3
AV1:
VCR
SET TOP BOX
DVD PLAYER
DVD RECORDER
CAMCORDER
GAME CONSOLE /
COMPUTER(RGB)
AV2:
VCR / S-VIDEO VCR
Q-Link COMPATIBLE VCR
DVD PLAYER
DVD RECORDER
Q-Link COMPATIBLE
DVD RECORDER
CAMCORDER /
S-VIDEO CAMCORDER
AV1
VIDEO
AV2
AV3
VIDEO
S-VIDEO
RGB
S VIDEO
AV3:
VCR / S-VIDEO VCR
Q-Link COMPATIBLE VCR
SET TOP BOX
DVD PLAYER
DVD RECORDER
Q-Link COMPATIBLE
DVD RECORDER
CAMCORDER /
S-VIDEO CAMCORDER
GAME CONSOLE /
COMPUTER(RGB)
How to connect the Component Input terminals
Example:
This terminal accepts progressive or nonprogressive signals format, as well as high
definition 750(720)/50p, 750(720)/60p,
1125(1080)/50i and 1125(1080)/60i.
COMPONENT
AUDIO
Y
Y
Y, PB, PR PB
OUT
PB
DVD PLAYER
AUDIO
OUT
PR
PR
L
L
R
AUDIO
L
L
Y
R
R
PB
AUDIO
IN
PR
RGB
VIDEO
R
Notes:
• Additional equipment and cables shown are not supplied with this TV set.
• Do not connect a computer with TTL output (5V) to this set.
• For Scart terminal wiring and applicable component signals information see page 45.
42
VIDEO
AV1
VIDEO
AV2
AV3
VIDEO
S-VIDEO
RGB
S VIDEO
Troubleshooting
If there is a problem with your TV please refer to the table below to determine the symptoms, then carry out the
suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model
number and serial number (both found on the rear of the TV).
Symptoms
Picture
Checks
Sound
Snowy Picture
Noisy Sound
Aerial location, direction or connection
Multiple Images
Normal Sound
Aerial location, direction or connection
Noisy Sound
Electrical appliances
Cars / Motorcycles
Fluorescent lights
Interference
Switch on P-NR in Picture menu to reduce picture noise.
Volume level
Normal Picture
No Sound
Sound mute switched on.
No Picture
No Sound
TV set to AV mode.
Not plugged into AC outlet.
Not switched on.
Picture / Sound controls set at minimum levels.
Check if in Standby mode.
No Colour
Normal Sound
Colour controls set at minimum levels.
Poor or Distorted
Picture
Weak or No Sound Retune Channel (s).
Normal Picture
Weak or Distorted
Sound
Sound reception may have deteriorated.
Switch NICAM setting (Sound menu in Analogue only) to
Off until reception improves.
CAUTION:
Symptoms
Check
Some parts of the screen do
not light up.
The plasma TV panel is manufactured using an extremely high level of precision technology,
however, sometimes some parts of the screen may be missing picture elements or have
luminous spots. This is not a malfunction.
After-images appear
ABCDEF
Do not allow a still picture to be displayed for an extended period, as this can cause a permanent
after-image to remain on the Plasma TV.
Examples of still pictures include logos, video games, computer images, teletext and images
displayed in 4:3 mode.
With no signal present, and without any user operation, the Panasonic screensaver will appear
automatically after a few minutes to prevent image retention.
During DVB teletext, radio service or menu display, the level of the contrast will decrease
automatically after a few minutes to prevent image retention.
Note:
The permanent after-image on the Plasma TV resulting from fixed image use is not an operating
defect and as such is not covered by the Warranty.
This product is not designed to display fixed images for extended periods of time.
Sleep Feature
If the set is not switched off when the TV station stops transmitting, it will automatically go to standby mode after 30
minutes, This function will not operate when this TV is in AV mode.
Notes:
• External surfaces of the unit may become hot during operation. But this is completely normal.
• See label on the base of this equipment for ratings and other information.
43
DVB Troubleshooting
Some problems will only occur when viewing DVB channels. Due to the different techniques involved in digital
reception, DVB signal quality can be poor even if you appear to have a strong signal when viewing analogue
programmes.
The DVB system requires a good quality signal to provide the best picture. When viewing analogue pictures, interference
such as signal reflection from nearby buildings or mountains causes ‘ghosting’, but still provides a viewable picture.
For the DVB system, interference such as this can disrupt the flow of data causing the picture to appear to be made
up of large blocks, or to freeze intermittently. If the picture disappears completely, this could mean that signal quality
is very poor. If this happens often, you may need to improve your aerial system to provide a better signal. This TV
contains a complex microprocessor which enables you to view enhanced digital services. Occasionally this device
may need to be reset. This can be done by pressing the standby button on your remote control.
Symptoms
Checks
No DVB channels listed in the TV Guide after Auto
Setup.
DVB TV Guide
:Landscape
Wed 12/05/04 10:46
Category
All Services
Wed 12th
Time:
19:30
20:00
20:30
Prog. type
All Types
21:00
Check that DVB transmissions are available from the
transmitter you are currently using. If not, try directing
the aerial at another local transmitter.
21:30
Check analogue transmissions. If picture quality is
poor, you will need to improve or change your aerial
system to receive DVB channels. Consult a local
installer.
Change display mode
Select channel
Select Programme
Info
Exit
Category
+24 Hr
Prog. type
Blocky interference.
Picture freezes intermittently.
Blocky interference indicates that the signal quality is
poor.
You should consider improving your aerial system.
To check the quality of your signal use the Signal
Quality feature (see page 28).
Good quality signal – indication is green.
Poor quality signal – indication is red.
I have a good aerial system, but still cannot receive
DVB stations.
If you have tried the previous solutions and are still
unable to receive DVB channels, you may need to
provide dedicated aerial feeds to the TV and other
equipment.
This can be implemented using an
aerial splitter or separate aerials.
TV
Separate
Aerial
Aerial
Input
terminal
Aerial
Output
VCR
44
Aerial
Input
terminal
Aerial
Output
AERIAL
SPLITTER
Aerial
Input
terminal
Separate
Aerial
Scart terminal information
AV1 Scart terminal (RGB, VIDEO)
Socket Earth
21
CVBS out (video) 19
CVBS earth
17
Red in
15
Red earth
13
Green in
11
Green earth
9
Blue in
7
Blue earth
5
Audio out (L)
3
Audio out (R)
1
AV2 Scart terminal (VIDEO, S-VIDEO, Q-Link)
Socket Earth
21
CVBS out (video) 19
CVBS earth
17
S.C. - in
15
Earth
13
-11
Earth
9
-7
Earth
5
Audio out (L)
3
Audio out (R)
1
20 CVBS in (video)
18 RGB status earth
16 Status RGB
14 Earth
12 - 10 - 8 Status CVBS
6 Audio in (L)
4 Audio earth
2 Audio in (R)
20 CVBS in (video)
18 Earth
16 - 14 Earth
12 - 10 Q-Link data
8 Status CVBS
6 Audio in (L)
4 Audio earth
2 Audio in (R)
AV2 - Pins 15 and 20 are dependent
on AV2 S-VHS / VIDEO switching.
Suitable inputs for AV1 include
RGB (Red / Green / Blue).
AV3 Scart terminal (RGB, VIDEO, S-VIDEO, Q-Link)
Socket Earth
21
CVBS out (video) 19
CVBS earth
17
Red in, S.C. - in 15
Red earth
13
Green in
11
Green earth
9
Blue in
7
Blue earth
5
Audio out (L)
3
Audio out (R)
1
20 CVBS in (video)
18 Earth
16 Status RGB
14 Earth
12 - 10 Q-Link data
8 Status CVBS
6 Audio in (L)
4 Audio earth
2 Audio in (R)
AV3 - Pins 15 and 20 are dependent
on AV3 S-VHS / VIDEO switching.
Component signal that can be displayed
Applicable input signal for Component(Y, PB, PR)
Signal name
525(480)/60i
525(480)/60p
625(576)/50i
625(576)/50p
750(720)/50p
750(720)/60p
1125(1080)/50i
1125(1080)/60i
Horizontal frequency (kHz)
15.73
31.47
15.63
31.25
37.50
45.00
28.13
33.75
Vertical frequency (Hz)
59.94
59.94
50.00
50.00
50.00
60.00
50.00
60.00
Note: Signals other than above may not be displayed properly.
45
Specifications
Power Source
Power Consumption
Plasma Display panel
Drive method
Aspect Ratio
Contrast Ratio
Visible screen size
(No.of pixels)
Sound
Speaker
Audio Output
Receiving Systems /
Band name
Aerial - Rear
Operating Conditions
Connection Terminals
AV1 (Scart connecter)
AV2 (Scart connecter)
AV3 (Scart connecter)
COMPONENT VIDEO
AUDIO L - R
Output
AUDIO L - R
Dimensions ( W × H × D )
Mass (Weight)
TH-37PE50B, TH-37PE40B
AC 220 - 240 V, 50 / 60 Hz
Average use : 253 W
Standby condition :
0.3 W (Without DVB Timer programmes)
16 W (With DVB Timer programmes)
TH-42PE50B, TH-42PE40B
Average use : 323 W
Standby condition :
0.3 W (Without DVB Timer programmes)
16 W (With DVB Timer programmes)
AC type
16:9
4000:1
94 cmV
106 cmV
818 mm (W) × 461 mm (H) × 939 mm (diagonal) 920 mm (W) × 518 mm (H) × 1,056 mm (diagonal)
408,960 (852 (W) × 480 (H)) [2,556 × 480 dots]
12 cm × 6 cm × 2 pcs, 6 Ω
16 W (8 W + 8 W ), 10 % THD
PAL I
UHF E21-68.
PAL 525/60
Playback of NTSC tape from some PAL Video
recorders (VCR) or NTSC disc playback from DVD
player and recorder.
DVB
Digital terrestrial services via UHF aerial input.
M.NTSC
Playback from M.NTSC Video recorders (VCR).
NTSC (AV input only) Playback from NTSC Video recorders (VCR).
UHF
Temperature : 0 °C - 40 °C
Humidity : 20 % - 80 % RH (non-condensing)
21 Pin terminal (Audio/Video in, Audio/Video out, RGB in)
21 Pin terminal (Audio/Video in, Audio/Video out, S-Video in, Q-Link)
21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, S-Video in, Q-Link)
Y
1.0 Vp-p (including synchronization)
PB, PR
±0.35 Vp-p
RCA PIN Type × 2
0.5 Vrms
RCA PIN Type × 2
0.5 Vrms (high impedance)
968 mm × 641 mm × 96.5 mm
1,068 mm × 701 mm × 96.5 mm
28.5 kg Net
33 kg Net
Notes:
• Design and Specifications are subject to change without notice. Weight and Dimensions shown are approximate.
• This equipment complies with the EMC standards listed below.
EN55013, EN61000-3-2, EN61000-3-3, EN55020.
46
Sales and Support Information
Customer Care Centre
• For customers within the UK : 08705 357357
• For customers within the Republic of Ireland : 01 289 8333
• Visit our website for product information
www.panasonic.co.uk
• E-mail: [email protected]
Direct Sales at Panasonic UK
• Order accessory and consumable items for your product with
ease and confidence by phoning our Customer Care Centre
Monday – Thursday 9:00am – 5:30pm,
Friday 9:30am – 5:30pm (Excluding public holidays).
• Or go on line through our Internet Accessory ordering
application at www.panasonic.co.uk.
• Most major credit and debit cards accepted.
• All enquiries transactions and distribution facilities are provided
directly by Panasonic UK Ltd.
• It couldn’t be simpler!
• Also available through our Internet is direct shopping for a wide
range of finished products, take a browse on our website for
further details.
Exclusive to Plasma / DVD Ram / LCD Television / LCD Projector product:
Interested in purchasing an extended guarantee? Please contact your dealer
or our Customer Support Department on 01344 476540 or
[email protected] for more details.
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)
TH-37PE50B Declaration of Conformity No 3397, 26th January 2005
TH-42PE50B Declaration of Conformity No 3396, 26th January 2005
TH-37PE40B Declaration of Conformity No 3535, 22nd April 2005
TH-42PE40B Declaration of Conformity No 3536, 22nd April 2005
Customer’ Record
The model number and serial number of this product can be found on its rear panel. You should note this
serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent
record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service
purposes.
Model Number
Serial Number
Panasonic (U. K.) Ltd.
Willoughby Road, Bracknell, Berks RG12 8FP
Web Site http://www.panasonic.co.uk
 2005 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
Printed in Czech Republic
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement