Panasonic TH37PD60B Operating Instructions

Panasonic TH37PD60B Operating Instructions
Information on Disposal for Users of Waste Electrical & Electronic Equipment
(private households)
This symbol on the products and/or accompanying documents means that used electrical and
electronic products should not be mixed with general household waste.
For proper treatment, recovery and recycling, please take these products to designated collection
points, where they will be accepted on a free of charge basis. Alternatively, in some countries you
may be able to return your products to your local retailer upon the purchase of an equivalent new
product.
Disposing of this product correctly will help to save valuable resources and prevent any potential negative
effects on human health and the environment which could otherwise arise from inappropriate
waste handling. Please contact your local authority for further details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
Operating Instructions
Plasma Television
Model No. TH-37PD60B
TH-42PD60B
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for
further information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method
of disposal.
Licence
Trademark
Credits
••
DVB is a trademark of the DVB Digital Video Broadcasting Project (1991 to 1996).
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks
of HDMI Licensing LLC.
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)
TH-37PD60B Declaration of Conformity No 3987, 19th January 2006
TH-42PD60B Declaration of Conformity No 3986, 19th January 2006
DVB DIRECT
Analogue TV REC
MODE
GUIDE
TV/AV
OK
MENU
Customer’s Record
The model number and serial number of this product may be found on its rear panel. You should note this serial
number in the space provided below and retain this book, plus your purchase receipt, as a permanent record
of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number
EXIT
TEXT STTL INDEX HOLD
Serial Number
1
2
3
4
5
6
7
8
9
0
C
VCR
ASPECT
N
U.K. Standard
English
Printed in Czech Republic
REC
PROGRAMME
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
IDTV
VCR
DVD
Turn your living room into a home theatre!
Contents
Experience an amazing level of multi-media excitement
Be Sure to Read
Receive terrestrial digital services using an integrated (Digital Video Broadcasting) tuner
(Display DVB programmes with TV Guide (p. 12) / Timer recording (p. 34) /
Register and instantly call up favourite programmes with Profile Edit (p. 26))
Enjoy rich multi-media
Camcorder
Satellite receiver
Amplifier with
Speaker system
Safety Precautions ······································ 4
(Warning & Caution)
Notes ··························································· 5
Maintenance ··············································· 5
Quick Start Guide
Accessories/Options············ 6
Identifying Controls ·············· 7
Basic Connection ·················· 8
Auto Setup······························ 10
Quick Start Guide
Sharp pictures with HDMI terminal
Control DVD recorder / VCR via TV with Q-Link connection (p. 36)
Create home theatre and DVD recorder link-ups with
"Control with HDMI" without complicated settings!
•
••
DVD recorder
Enjoy your TV!
DVD player
Basic Features
••
••
Watching TV ·············································· 11
Using TV Guide (DVB) ······························ 12
Viewing Teletext ········································ 14
Watching VCR, DVD and Satellites ·········· 17
Viewing
VCR
Advanced Features
How to Use Menu Functions ····················· 18
(picture, sound quality, etc.)
DVB Settings (DVB) ·································· 24
(pay-TV, subtitles, etc.)
Profile Edit / Child Lock (DVB) ·················· 26
DVB Tuning Menu (DVB) ·························· 28
Editing and Setting Channels (Analogue) ···· 30
Restore Settings ······································· 32
Owner ID ··················································· 33
Recording Controls ··································· 34
Q-Link Functions ······································· 36
HDMI Functions ········································ 37
External Equipment ··································· 40
••
••
••
2
Technical Information ································ 42
FAQs ························································· 44
On screen messages ································ 46
Index ························································· 47
Specifications ············································ 47
Licence ······················································ 48
FAQs, etc.
FAQs, etc.
Advanced
•
•
••
••
••
••
•
3
Safety Precautions
Notes
Warning & Caution
Handling the mains plug
Power source
Ensure that the mains plug is easily accessible at all
times. The On/Off switch on this model does not fully
disconnect the TV from the mains supply. Remove the
mains plug from the wall socket when the TV set is not
used for a prolonged period of time.
Ensure the grounding pin on the mains plug is securely
connected to prevent electrical shock.
An apparatus with CLASS I construction shall be connected
to a mains socket outlet with a protective earthing connection.
This TV set is designed to operate on 220-240V,
50 / 60 Hz AC.
Note
If the set is not switched off when the TV station stops
transmitting, it will automatically go to standby mode after 30
minutes. This function will operate only in Analogue TV mode.
Do not expose to
direct sunlight and
other sources of heat
AC 220-240 V
50 / 60 Hz
Avoid exposing the TV set to direct
sunlight and other sources of heat. To
prevent fire never place any type of
candle or naked flame on top or near
the TV set.
IMPORTANT: THE MOULDED MAINS PLUG
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse is
fitted in this mains plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating
of 5 amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark ASA or the BSI mark
on the body of the fuse.
If the mains plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the mains plug must not be used until a replacement cover is obtained.
A replacement fuse cover may be purchased from your local Panasonic Dealer.
If the fitted moulded mains plug is unsuitable for the socket outlet in your home, then the fuse shall be
removed and the mains plug cut off and disposed of safety. There is a danger of severe electrical shock
if the cut off mains plug is inserted into any 13 amp socket.
If a new mains plug is to be fitted, please observe the wiring code as shown below.
If in any doubt, please consult a qualified electrician.
WARNING: – THIS APPARATUS MUST BE EARTHED.
IMPORTANT: – The wires in this mains lead are coloured in accordance with the following code: –
Green-and-Yellow: Earth Blue: Neutral Brown: Live
As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings
identifying the terminals in your mains plug, proceed as follows.
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the mains plug which is
marked with the letter E or by the Earth symbol or coloured GREEN or GREEN-AND-YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the mains plug
which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in the mains plug
which is marked with the letter L or coloured RED.
How to replace the fuse.
Open the fuse compartment with a screwdriver and replace the fuse.
4
Do not display a still picture for a long time
Do not remove the cover
Do not remove the rear cover as live parts are
accessible when it is removed. There are no
user serviceable parts inside.
Do not expose to rain or
excessive moisture
To prevent damage which might result in electric
shock or fire, do not expose this TV set to rain
or excessive moisture.
This TV must not be exposed to dripping or
splashing water and objects filled with liquid,
such as vases, must not be placed on top of or
above the TV.
Do not block the rear
ventilation openings
This causes the image to remain on the plasma
screen ("after-image").
This is not considered a malfunction and is
not covered by the warranty.
Typical still images
Channel number and other logos
Image displayed in 4:3 mode
Video game
Computer image
12
4:3
To prevent after-image, the screen saver is
automatically activated after a few minutes if no signals
are sent or no operations are performed. (p. 44)
Keep the unit away from these equipment
Electronic equipment
In particular, do not place video equipment near the unit
(electromagnetic interference may distort images / sound).
Equipment with an infrared sensor
This TV also emits infrared rays (this may affect
operation of other equipment).
Ventilation should not be impeded by covering
the ventilation openings with items such as
newspapers, tablecloths and curtains.
Maintenance
Allow sufficient space around
the unit for radiated heat
First, remove the mains plug from the socket outlet.
Daily care: Gently wipe the surface clean of dirt by using a soft cloth.
Major contamination: Wipe the surface clean using a soft
cloth dampened with clean water or water containing a
small amount of neutral detergent. Then, using a soft dry
cloth, evenly wipe the surface clean until it is dry.
10
10
10
7
6
Display panel
(cm)
Do not place the TV on
sloped or unstable surfaces
The TV may fall off or tip over.
Use only the dedicated
stands / mounting equipment
Using an unauthorized stand or other fixtures may
make the unit shaky, risking injury. Be sure to ask
your local Panasonic dealer to perform setup.
Use optional stands / mounts (p. 6).
Cabinet and display panel care
Remove the mains plug from the wall socket.
The cabinet and display panel can be cleaned
with a soft cloth moistened with mild detergent
and water. Do not use solutions containing
benzol or petroleum.
TV sets can produce static electricity, care must
be taken whenever touching the TV screen.
Caution
•
•
The surface of the display panel has been specially
treated and may be easily damaged.
Do not tap or scratch the surface with your fingernail or
other hard object.
Use care not to subject the surface to insect repellent,
solvent, thinner, or other volatile substances
(this may degrade surface quality).
Cabinet
Daily care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water
or water containing a small amount of neutral detergent.
Then, wring the cloth and wipe the surface clean with it.
Finally, wipe the surface clean with a dry cloth.
Caution
•
•
•
Use care not to subject the TV unit's surfaces to detergent.
(A liquid inside the TV unit could lead to product failure.)
Use care not to subject surfaces to insect repellent,
solvent, thinner, or other volatile substances
(this may deteriorate the surface by peeling the paint).
Do not allow the cabinet to make contact with a rubber
or PVC substance for a long time.
Mains plug
Wipe the mains plug with a dry cloth at regular intervals.
(Moisture and dust may lead to fire or electrical shock.)
5
Accessories/Options
Standard accessories
Remote Control
Transmitter
•
MODE
OK
EUR7651080
1
2
3
4
5
6
7
8
9
C
0
•
R6 (UM3)
TV/AV switch
1 Year Guarantee Registration
CRM
(Customer Relationship Management)
•
TMME258
Increases or decreases the programme position by one.
When a function is already displayed, press to increase
or decrease the selected function. When in Standby
mode, switches TV On.
Power LED
•
Mains Lead
IDTV
Remote
control signal
receiver
MAINS Power
On / Off switch
K2CT3DH00018
Red light indicates Standby
Function Volume / Contrast / Brightness / Colour /
mode. When using the remote
Sharpness / Tint (NTSC mode) / Bass / Treble /
select
control, indicates the TV has
Balance / Manual tuning (analogue mode) (p. 30)
received a command.
DVB LED
Active for Timer Programming or
Standby for Direct TV Recording :orange (flash)
Timer Programming On
:orange
•
•
Installing remote's batteries
Attaching the cable clampers
TH-37PD60B
1
TH-42PD60B
OK button to confirm
selections and choices.
Press after selecting programme positions
1 - 99 (0 - 9 in Analogue mode) to avoid delay.
Pull
open
Switches DVB (digital broadcasting)
/ Analogue mode (p. 11)
Standby On / Off switch
(Switches TV On or Off standby)
Hook
2
+
OK
MENU
Snap open
+
Remove from the TV unit
Note the correct
polarity (+ or -)
Caution
Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control unit.
Do not mix old and new batteries.
Do not mix different battery types (such
as alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd)
batteries.
Do not burn or breakup batteries.
•
••
Do not bundle the RF cable and mains lead together (could cause
distorted image).
Fix cables with clampers as necessary.
When using the optional accessory, follow the option’s assembly
manual to fix cables.
Optional accessories
Pedestal
TY-ST42PA50W
Plasma TV stand
TY-S37PA60W
(TH-37PD60B)
TY-S42PA60W
(TH-42PD60B)
TY-ST42PX5W
Push both side
hooks and pull
out
Snap shut
Wall-hanging
bracket
(vertical)
TY-WK42PV3W
TY-WK42PV2W
EXIT
MENU
Press to access the Picture, Sound
and Setup menus (p. 20 and p. 22)
-
•
TV/AV
Close
-
•
GUIDE
TV Guide (p. 12)
Teletext (p. 14)
Subtitles (p. 11)
TEXT STTL INDEX HOLD
(To view subtitles)
1
2
3
Programme / channel change buttons (0-9)
and Teletext page buttons. (p. 11 and p. 14)
When in Standby mode, switches TV On.
4
5
6
7
8
9
Direct channel access
Use together with numeric buttons to
access analogue TV channels by entering
UHF broadcast channel number. (p. 11)
Selects programmes in sequence
Normalises (p. 20)
C
(Resets all settings to their default levels)
Changes picture aspect ratio
(p. 11)
0
To immediately record programme
in VCR / DVD recorder with Q-Link
connection
(p. 36)
Switch between viewing TV or
AV input. (p. 17)
Cursor buttons to make
selections and adjustments
EXIT (Returns to TV screen)
Coloured buttons used for
the selection, navigation and
operation of various functions.
Identifying Controls
Accessories/Options
DVB DIRECT
Analogue TV REC
MODE
••
DIRECT TV Recording
Quick Start Guide
•
STR (Normalisation store)
(Stores tuning and other function settings)
Check that you have the accessories and items shown
Batteries for the Remote
Operating Instructions
Control Transmitter (2)
Pan European Guarantee Card
N
Clamper (2)
Identifying Controls
Still Picture (p. 11)
Teletext Index (p. 16)
Programme Information (p. 11)
VCR
Volume
ASPECT
Sound mute On / Off
N
REC
VCR
DVD
PROGRAMME
VCR / DVD operations (p. 17)
(angle)
TY-WK42PR2W
IDTV
6
7
Basic Connection
External equipment and cables shown are not supplied with this TV.
Please ensure that the TV is disconnected from the mains socket before attaching or disconnecting any leads.
1
Ex.
2
Connecting aerial
(TV only)
Ex.
Connecting DVD Recorder (VCR)
(TV, DVD Recorder and VCR)
Aerial
3
Ex.
Connecting DVD Recorder (VCR) and Satellite receiver
(TV, DVD Recorder, VCR and satellite)
Aerial
Aerial
Rear of the TV
Rear of the TV
Mains lead (supplied)
Mains lead (supplied)
AV1
AV2
AV3
(Q-Link)
(Q-Link)
AV1
AV2
AV3
(Q-Link)
(Q-Link)
AC 220-240 V
50 / 60 Hz
AV1
AV2
AV3
COMPONENT
RGB
VIDEO
VIDEO
S-VIDEO
RGB
VIDEO
S-VIDEO
RGB
VIDEO
VIDEO
S-VIDEO
RGB
VIDEO
RGB
VIDEO
S-VIDEO
VIDEO
S-VIDEO
To unfasten
Basic Connection
•
(Q-Link) (Q-Link)
•
COMPONENT
COMPONENT
RF cable
Clamper
RF
cable
Quick Start Guide
Rear of the TV
RGB
VIDEO
S-VIDEO
Mains lead (supplied)
RF cable
SCART cable
(fully wired)
RF OUT
DVD Recorder or VCR
RF IN
SCART cable
(fully wired)
DVD Recorder
or VCR
RF cable
RF cable
RF OUT
RF cable
SCART cable
(fully wired)
SCART cable
(fully wired)
RF IN
••
•
8
Note
Connect to AV3 for a DVD Recorder / VCR supporting Q-Link (p. 36).
Connect to AV1 for a Satellite receiver.
If connecting the TV and Satellite receiver with SCART cable, you can watch satellite broadcast by RGB input signal.
SCART:
21 pin connection used for video, audio and switching signals (Also known as Euro SCART and Peritel)
RF:
Radio Frequency - Signal received from terrestrial aerial.
RGB / S-Video / Video:
Choose between these three video formats depending on personal preference and equipment requirement.
(RGB - Red, Green and Blue)
VCR:
Video Cassette Recorder
RF OUT
RF IN
RF cable
RF IN
Satellite receiver
9
Auto Setup
Watching TV
Search and store TV channels automatically.
These steps are not necessary if the setup has been completed your local dealer.
1
Plug the TV into mains socket and switch On
•
21
Prog. Channel Service Name
NetID.
TS ID. Quality
4
30 BBC NEWS 24
12302
4158
9
5
30 BBCI
12302
4158
9
6
30 CBBC Channel
12302
4158
9
7
30 BBC Radio Wales
12302
4158
9
8
30 BBC Radio Cymru
12302
4158
9
Exit
•
DOWNLOAD IN PROGRESS
PLEASE WAIT
EXIT
Programme : 63
Remote control unavailable
1
4
5
8
2
3
6
9
■ When inputting owner ID
Yo u n o w h a v e t h e o p p o r t u n i t y
to enter your details and
help the police crack crime
see instruction book
Owner ID
PIN NUMBER
NAME
HOUSE NO
POSTCODE
:
:
:
:
0123456789
0
Change character
Select character
Store Owner ID
Exit
VCR
Usable characters and numbers
■ When inputting owner ID later
If you input the ID later
"Owner ID" (p. 33)
•
To check programme list
at-a-glance
TV Guide (DVB) (p. 12)
Programme Guide (Analogue)
(p. 13)
To edit analogue channels
"Programme edit" (p. 31)
Many features available on this TV can be accessed via the On Screen Display menu.
■ How to use remote control
MENU
Using the
On Screen
Displays
OK
OK
OK
EXIT
10
3
4
5
6
Information
banner
7
8
9
Select a channel
C
0
used to open the main menus and to
return to the previous menu
used to move the cursor and select
menus
used to access menus, adjust levels or
to select from a range of options
Volume
•
Note
used to store settings after adjustments
have been made or options have been
set
used to exit the menu system and
return to the normal viewing screen
∗∗∗∗
∗∗∗∗∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗∗
0123456789
Change character
Select character
Store Owner ID
Exit
On-screen operation
guide will help you.
••
1
2
3
4
5
6
7
8
9
20:30 Profile 1
Change Category
For info press
Subtitle
TXT
0
To select a channel using programme guide (p. 13)
To select a channel inputting the channel number, e.g. 39.
C → 3 → 9
1
CH_ _
■ Other useful functions (Operate after
)
HOLD
Hold
Freeze / unfreeze picture
Display
subtitles
Display / hide subtitles (if available)
•
To change the language for DVB
STTL
"Preferred subtitles" (p. 25) (If available)
Display programme information
■ In DVB:
Display
information
banner
Programme
Information of another channel
Channel
1 BBC ONE WALES
Corontation Street
20:00~20:55
Now
Encrypted
Multi-Audio
During scrambled
broadcasting
Broadcast time
Category
Current time
20:30 Profile 1
Change Category
For info press
Subtitle
TXT
Features
available
To
change
the
category
blue
Information on next programme
To watch the programme
OK
listed in the banner
Extra information
(To normal banner
)
To set display timeout (p. 25)
OK
OK
EXIT
To hide
Appears also when changing channel.
■ In Analogue: Displays analogue information for a few seconds.
Yo u n o w h a v e t h e o p p o r t u n i t y
to enter your details and
help the police crack crime
see instruction book
:
:
:
:
Corontation Street
20:00~20:55
Now
Encrypted
Multi-Audio
■ In DVB
To select programmes using TV Guide (p. 12)
•
■ In Analogue
To watch pay-TV (p. 25)
(example: Owner ID)
Owner ID
or
1 BBC ONE WALES
VCR
ASPECT
■ ON SCREEN HELP Instructions box
PIN NUMBER
NAME
HOUSE NO
POSTCODE
up
down
Auto Setup is now complete and your TV is ready for viewing.
•
1 BBC 1
2
3
Analogue
Watching TV
Auto Setup
If tuning and downloading
data have failed, perform "Auto
Setup" (p. 31).
If you turned the TV Off during
Standby mode last time, the
TV will be in Standby mode
when you turn the TV On with
MAINS power On / Off switch.
If a compatible recording equipment
with Q-Link or similar technologies
(p. 36) is connected, analogue
channel information is automatically
downloaded to the equipment.
DVB
DVB
Analogue
MODE
1
VCR
Following the on-screen operation
guide, enter your own choice of PIN
number, name, etc.
For detailed procedures
"Owner ID" (p. 33)
Make a note of the PIN number
in case you forget it.
•
HOLD
2
Select DVB (Digital Video Broadcasting) or Analogue
••
•
•
EXIT
Note
STTL
The sorted programme order
depends upon the TV signal,
the broadcasting system and
reception conditions.
•
•
∗∗∗∗
∗∗∗∗∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗∗
EXIT
(Press for about 1 second)
MAINS power On / Off switch should be On.
Picture will appear.
Viewing
7
2
OK
You can now use the remote
control to turn On the unit or turn
the unit to standby mode.
(Power LED: On)
Auto Setup will start to search for
TV channels and store them.
1
Turn power on
Quick Start Guide
•
•
68
This will take about 3 mins.
MENU
GUIDE
(Takes a few seconds to be displayed)
DVB Auto Setup
Please Wait !
OK
DVB
Analogue
MODE
Enjoy viewing the picture at its optimum size and aspect ASPECT
Change the aspect ratio (p. 42)
Change
aspect
ratio
14 : 9
•
•
Each press changes the mode.
Auto aspect / 16:9 / 14:9 / 4:3 /
Zoom1 / Zoom2 / Zoom3
To change the mode with colour buttons
While the bar is displayed
red green
11
Using TV Guide (DVB mode)
TV Guide―Electronic Programme Guide (EPG) provides an on-screen listing of programmes currently
broadcast and future broadcasts over the next seven days (depending on the broadcaster).
DVB
Analogue
MODE
GUIDE
OK
MENU
EXIT
1
2
GUIDE
Category
All Services
Eastender DIY SOS
The Bill
Hot Wars
Holiday Program
Details
OK
Terminator
News
The Bill
15 To1
Page down
Category
44 Channel4
DlY SOS
20:30~21:00
The Bill
21:00~22:00
Red Cap
22:00~22:30
Live junction
22:30~23:00
23:00~23:10
POP 100
Cinema info
23:10~00:00
Sports
Change display mode
Select Programme
Select channel
Timer Programming
Exit
+24 Hr
green
Category
All Services
All Services
OK
Information
Profile 1
To list favourite
channels (p. 27)
Profile 2
Profile 3
programme list
of the
selected type
Prog. type
All Types
All
Types
21:00
view
select
type
So
Good bye Hell
Sport
•
•
•
News
The Bill
Lifestyle
Drama
9
•
DVB LED
Orange DVB LED
(Rapid blinking during recording)
When this TV unit is turned on for the first time, or the unit is switched off for more than a week, it may take some
time before the TV Guide is completely shown.
When recording programmes, you must make the proper settings on the external recording equipment connected to the unit.
If a compatible recording equipment with Q-Link or similar technologies is connected to the unit (p. 8) and the
"Q-Link" settings (p. 23) are completed, no setting of the equipment is required.
Also read the manual of the recording equipment.
In Analogue – Analogue Programme Guide (Analogue mode)
The Analogue Programme Guide shows channel list only. (No programme info in Analogue mode)
If in DVB mode
Select Analogue
DVB
Analogue
MODE
GUIDE
Select the channel and watch
select
OK
Terminator
Children’s
Education
0
Note
21:30
The Bill
Entertainment
blue
Edit timer
Exit
Return
Delete
"Timer Programming" (p. 34)
View a channel list
(Type list)
Movies
Red Cap
News
60 Off
■ To check / change / cancel a timer programming event
Profile 4
■ To view a
120 Off
22:30
Prog. type
select
category
Free TV
Radio
20:00
21:30
Portrait (Displays by
broadcaster)
(Category list)
Pay TV
18:00
7/8 SA
444 SC4
Page down
Category
6/8 FR
ITV1
(Timer Programming screen)
Prog. type
All Types
Page up
Info
min.
BBC1
3
The
view
(Analogue mode)
Using TV Guide (DVB)
20:00~20:30
End
1
•
red
2 BBC2
Eastender
Start
set
Wed 12/05/04 10:46
1 BBC1
19:30~20:00
Thu 05/08/04 18:49
Date
Select timer
OK
Prog. type
Category
All Services
Pos. Name
select
Timer
programming
to record
Page up
Info
DVB Timer Programming
Viewing
■ To next day
Select the programme
to be broadcast
The
DVB TV Guide : Portrait
■ To previous day
yellow
Pop Idol
Wed 12th
(Landscape / Portrait)
programme list
of the selected
category
watch
I'm A Celebrity
GUIDE
OK
The Bill
Panoroma Sex And The City
Change display mode
Select channel
Select Programme
Timer Programming
Exit
-24 Hr
+24 Hr
(TV screen)
select
Pepsi Char. Good bye Hell
142 ITV2
Rugby
Return to List
So
122 five
■ To change the layout
■ To view a
Red Cap
Emmerdal. Coronation Street
44 Channel4 10 O' clock News BBC
To return
to the start page
Thu 05/08/04 18:49
select
Watch the
programme
21:30
2 BBC2
Landscape
(Displays by
broadcaster)
IDTV
21:00
1 BBC1
144 SC4
12
DVB TV Guide
Select the programme
now on the air
Prog. type
All Types
20:00-20:30 DIY SOS: We open in the Battersdys
Time: 19:30
20:00
20:30
Channel
EXIT
View details
View Programme
Exit
Programme Current date and time (TV Guide start page)
DVB TV Guide :Landscape
Thu 05/08/04 18:50
21 ITV1
■ To return to TV
)
View "Portrait" to see one channel at a time
View "Landscape" to see many channels
TV Guide
time
MENU
View details
of the
programme
View TV Guide (landscape or portrait)
Fri 6th
start page
Select
the programme
DVB If in Analogue mode
Analogue
MODE Select DVB
TV Guide
date
■ To return to the
■ Other useful functions (Operate after
Analogue Programme Guide
Prog.
VCR :
1 :
2 :
3 :
4 :
5 :
6 :
7 :
8 :
9 :
10 :
11 :
12 :
Name
BBC1
BBC2
ITV
S4C
Chan.
Prog.
CH21
CH44
CH51
CH41
CH47
CH23
CH26
CH58
-
13
14
15
16
17
18
19
20
21
22
23
24
:
:
:
:
:
:
:
:
:
:
:
:
Name
Chan.
-
■ To change pages
OK
watch
13
Viewing Teletext
You can enjoy news, weather forecasts and subtitles, etc. (depending on the broadcaster)
DVB (digital broadcasting) mode
Analogue mode
What is FASTEXT mode (default)?
DVB teletext services
DVB teletext services differ greatly from analogue teletext.
When you switch to a DVB teletext service, the images
you see can contain graphics and text, laid out and
controlled in a manner decided by the broadcaster.
You can check if the programme has teletext information.
•
1
DVB
Analogue
MODE
2
OK
MENU
In FASTEXT mode, four differently coloured subjects are situated at the bottom of the display. To access more information about one
of these subjects, press the appropriately coloured button. This facility enables fast access to information on the subjects shown.
What is List mode?
Information
banner (p. 11)
1 BBC ONE WALES
Displayed if
programme has
teletext information
Corontation Street
20:00~20:55
Now
Multi-Audio
20:30
Profile 1
Change Category
For info press
Subtitle
TXT
In List mode, four differently coloured page numbers are situated at the bottom of the screen. Each of these
numbers can be altered and stored in the TV’s memory. ("Store Frequently viewed pages", p. 16)
■ To change mode
If in Analogue mode
Select DVB
DVB
Analogue
MODE
Switch to Teletext
TEXT
3
4
5
6
7
8
9
0
VCR
3
Select the page
DVB
Analogue
MODE
17:51 28 Feb
•
If cannot be switched to Teletext,
set Subtitles OFF. (p. 11)
OK
MENU
TEXT
•
TEXT STTL INDEX HOLD
3
How to use
In all cases, it is possible to navigate the pages using buttons on the
remote control, but because the commands available must apply to all
manufacturers of DVB equipment, some on screen commands may
not correspond exactly to the remote control buttons.
For example:
When "select" or "go" is displayed
•
•
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
Time / date
TELETEXT
INFORMATION
up
or
or
down
0
VCR
>>
17:51 28 Feb
Colour bar
red
green yellow blue
(Corresponds to the colour bar)
VCR
When options with numbers are displayed
(information)
red green yellow blue
1
2
3
4
5
6
8
9
7
As the blue bar is displayed
OK
When the key words are displayed on colour bar
■ To return to TV
3
Current
page
number
OK
When "◄", "►", "▲", "▼" symbol is displayed
When "i" is displayed
2
<< 01 02 03 04 05 06 07
Displays the
index page
(content varies
depending on the
broadcasters)
0
VCR
•
Note
Contrast will be lowered
in the still picture to
prevent after-image.
TEXT
Note
As soon as you switch to a DVB channel with links to a teletext service,
software is downloaded in the background to enable the teletext function.
This means that when switching to a DVB channel, you should wait for
approximately 5 seconds before pressing the TEXT button - this will allow
the software to download. If you press the TEXT button before download is
complete, there will be a short delay before the text screen is displayed.
While navigating DVB teletext, you will find there is a short delay when
moving between pages while the page downloads. There is often a prompt
shown somewhere on the page (for example "Loading") to let you know that
this is happening.
MENU
■ To adjust contrast
(Press twice)
TEXT
■ To return to TV
•
OK
(Press twice)
Press once to have picture and text.
Press again to return to TV.
Viewing Teletext
•
•
•
•
•
1
Sub page number
•
■
To change the
channel
2
Switch to Teletext
Select Analogue
Viewing
2
1
If in DVB mode
DVB
Analogue
MODE
TEXT STTL INDEX HOLD
1
"Teletext" in Setup menu (p. 23)
■ Using Analogue teletext
Reveal
hidden
data
Reveal hidden words e.g. quiz page answers
MENU
red
•
Re-hide
red
(TOP)
FULL /
TOP /
BOTTOM
(BOTTOM)
Normal (FULL)
MENU
green
(Expand the BOTTOM half)
(Continued)
14
15
Viewing Teletext (Continued)
The Remote Control is capable of operating some functions of selected Panasonic VCRs and DVD
(Digital Versatile Disc) equipment.
Connect the Satellite receiver and you can watch satellite broadcasts.
To connect the equipment (p. 8)
Analogue mode
■ Using Analogue teletext (Continued)
If you wish to hold the current page without updating
HOLD
INDEX
Watching VCR, DVD and Satellites
1
Stop automatic updating
HOLD
■ To resume
HOLD
•
TV/AV
FASTEXT mode only
View in
multi
window
•
Watch TV and Teletext in two windows at once
•
•
Operations can be made only in Teletext screen.
Each time pressed: Teletext
Screen display
Terminal
TV
■ To change stored pages
Manual input
selection
(List mode only)
•
press
and
hold
OK
Corresponding
colour button
(AV mode screen)
Auto input
selection
If you wish to use
Subtitles, do not
change number on
blue button.
REC
3
4
5
6
7
8
9
OK
■ To return to TV
TV/AV
Enter the
4-digit number
example: P6
6
0 0
0
Sub pages:
The number of sub pages varies depending on the broadcasters (up to 79 pages).
It may take some time for searching, during which time you can watch TV.
16
Teletext automatically updates itself when new information becomes available.
Changes to TV screen temporarily
MENU
yellow
•
Component HDMI
EC1/RGB
AV1/RGB
(RGB input)
(S-video input) (S-video input)
EC2
EC3/RGB
AV3/RGB
(RGB input)
―
EC/
HDMI
Select the connector
connected to the equipment
Displays the selected connector
Appears
when
updating is
completed
yellow
View the
updated
page
(You cannot change the channel.)
The news page provides a function that indicates arrival of latest news ("News Flash").
red
green
AV1
AV2/
S-video
•
••
••
•
■ To view specific sub page
View theTV picture while searching for a teletext page
Watch
TV while
waiting
for update
AV1
IDTV
press
and
hold
Appears at top of the
screen
OK
•
Component HDMI
AV3
AV3S
example: AV1
yellow
blue
AV3/ Component/
S-video
HDMI
red
When colour bar disappears
Press any coloured buttons
You can also select the connector using the TV/AV button on the front panel of the TV.
Press the button repeatedly until you reach the connector to view.
Note
If the external equipment has an aspect adjustment function, set to "16:9".
For details, see the manual of the equipment or ask your local dealer.
HDMI (p. 37)
Some Panasonic VCR and DVD equipment connected to the TV unit can be directly operated with the remote control.
VCR
DVD
VCR / DVD switch
Select VCR / DVD
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD
Stop
Stop the operations
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in
reverse
DVD: Skip to the previous track or title
Press and hold to search backward
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture
rapidly forward
DVD: Skip to the next track or title
Press and hold to search forward
PROGRAMME
REC
Pause
Pause / Restart
DVD: Press and hold to play at slow speed
Programme Up / Down
Select programme
Record
Start recording
Watching VCR, DVD and Satellites
Viewing Teletext
2
View sub page (Only when teletext is more than one page)
blue
AV3
AV2
AV2S
••
1
VCR
MENU
3
AV2
The number changes to white.
0
View sub
page
DVD
PROGRAMME
Enter new page number
Colour button you
want to change
VCR
AV1
Viewing
As page is
displayed
TV/AV
TV and Teletext
Store frequently viewed pages
(only on first 25 channels on Programme Guide)
in the colour bar
Store
frequently
viewed
pages
2
Factory setting is "P888" (subtitle service) on blue button.
TEXT
••
■
•
Select the external input
Dependant on DVD/VCR setup
View subtitles by pressing STTL button
STTL
Receives input signals automatically when playback starts or
satellite receiver is switched on
If input mode is not switched automatically
Perform
and
OK
Subtitles
■ When connecting with SCART as example 2 or 3 (p. 8 and p. 9)
Input signals are automatically identified by the SCART (pin 8) terminal.
This function will be available for HDMI connection too (p. 37).
Return to the main index page
INDEX
Turn the TV on
17
How to Use Menu Functions
•M a i n m e n u
How to operate (p. 20 and p. 22)
P i c t u r e me nu
Sound menu
S e t u p m e nu
Picture menu
Viewing mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour balance
Colour management
P-NR
3D-COMB
Dynamic
-
+
+
+
+
Only available in NTSC signal
Normal
On
Off
On
Ma in me n u
P ic tu re me n u
Not available in HDMI and HD signal
Sound menu
Only available in NTSC / PAL
S e tu p me n u
Programme edit
Prog.
1
2
3
4
5
:
:
:
:
:
Chan.
Name
Lock
CH44
CH51
CH41
CH47
CH37
ABC
XYZ
FTP
123
456
Off
Off
Off
Off
Off
Delete
change or access
OK
Setup menu
select
Q-Link
AV2 out
Control with HDMI
Teletext
Off timer
Volume correction
Side panel
Power save
Power on preference
Tuning Menu
DVB Setup Menu
Owner ID
Shipping condition
Sound menu
-
Move
Download
CH44
AV2
Monitor
On
FASTEXT
Off
AUTO SETUP IN PROGRESS
SEARCHING :
PLEASE WAIT
21
Off
Off
TV
Access
Access
Access
Access
68
Tuning Menu
Exit
Return
Access
Access
Access
Programme edit
Auto setup
Manual tuning
(p. 30)
+
+
•
1
CH44
Not available in DVB
Off
Music
Off
Auto
Manual tuning
Only available in HDMI
21
68
Shipping condition
Search down/up
Store
Exit
Return
9 Direct entry
All tuning data will be erased
C
0
DVB Timer Programming
Thu 05/08/04 18:49
Start
Exit
Return
Pos. Name
(p. 32)
■ Choose from among alternatives
Normal
Changed
■ Adjust using the slide bar
Access
Access
Access
Access
Access
eng
Timer Programming
Yo u n o w h a v e t h e o p p o r t u n i t y
to enter your details and
help the police crack crime
see instruction book
Owner ID
PIN NUMBER
NAME
HOUSE NO
POSTCODE
:
:
:
:
∗∗∗∗
∗∗∗∗∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗∗
Profile Edit
Child Lock
DVB Tuning Menu
DVB System Setup
Multi Audio
min.
18:00
20:00
120 Off
7/8 SA
21:30
22:30
60 Off
(p. 35)
(p. 26 and p. 34)
All Services
Profile 1
1 BBC ONE Wales
2 BBC 2W
0123456789
7 BBC THREE
Change character
Select character
Store Owner ID
Exit
Return
10 BBC FOUR
30 CBBC Channel
31 CBeebies
40 BBC NEWS 24
■ Go to the next screen
1 BBC ONE Wales
2 BBC 2W
7 BBC THREE
Access
30 CBBC Channel
51 BBCi
89 BBC Radio Wales
90 BBC Radio Cymru
Displays the next
screen
DVB Auto Setup
Please Wait !
NTSC (National Television System Committee): One of television signal used in USA, etc.
HD signal: High-definition signal
DVB Auto Setup
Add New Service
New Service Message
Signal Condition
(p. 27)
21
68
Prog. Channel Service Name
DVB Tuning Menu
Access
Access
On
Access
(p. 28)
NetID.
30 BBC NEWS 24
12302
4158
9
5
30 BBCI
12302
4158
9
6
30 CBBC Channel
12302
4158
9
7
30 BBC Radio Wales
12302
4158
9
8
30 BBC Radio Cymru
12302
4158
9
This will take about 3 mins.
Signal Condition
CH30 1 BBC ONE Wales
0
Common Interface Module
Preferred Subtitles
System Update
Display Timeout
5
10
Common Interface
Access
Slot 1: No module inserted
English
Access
Access
System Update
3 seconds
(p. 24)
18
TS ID. Quality
4
DVB Programme
Signal Quality
Signal Strength
DVB System Setup
Advanced
(p. 27)
Child Lock Service List
Moved
Tuning Menu
End
6/8 FR
ITV1
Profile Editor
(p. 33)
Sharpness
Start
BBC1
3
DVB Setup menu
Number and positions
of alternatives
Colour balance
Date
1
How to Use Menu Functions
(picture, sound quality, etc.)
Bass
Treble
Balance
NICAM
Mode
Ambience
HDMI input
Add
Auto Update Search in Standby
System Update Search Now
Software Licence
On
Access
Access
19
How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and other functions.
■ Menu list
•
Menu
Setup menu (p. 22)
OK
MENU
EXIT
1
Display menu
2
Select the menu
MENU
•
Displays the functions that can be set
(varies according to the input signal)
select
OK
access
Setup menu
(example: Picture menu)
Viewing mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour balance
Colour management
P-NR
3D-COMB
Dynamic
select
OK
Normal
On
Off
On
(example: Picture menu)
N
4
IDTV
Adjust or select
Picture menu
Viewing mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour balance
Colour management
P-NR
3D-COMB
Dynamic
OK
Normal
On
Off
On
(example: Picture menu)
■ To return to TV
at any time
■ Choose from among alternatives
previous screen
MENU
Normal
Changed
■ Adjust using the slide bar
Sharpness
Moved
•
20
Note
To initialize all settings
"Shipping condition"
(p. 32).
■ To reset the setting
•
•
Increases or decreases the levels of these options according to your personal preference
Tint
With an NTSC signal source connected to the TV, the picture hue can be adjusted to
suit your taste
Colour balance
Allows you to set the overall colour tone of the picture (Cool / Normal / Warm)
Colour
management
Automatically adjusts colours to vivid ones (Off / On)
P-NR
Picture Noise Reduction
Automatically reduces unwanted picture noise (Off / Min / Mid / Max)
3D-COMB
Occasionally, whilst viewing still or slow moving pictures, colour patterning may be seen
Set to On to display sharper and more accurate colours (Off / On)
For PAL or NTSC signal reception only
Not valid on RGB, S-Video, components and HDMI
Analogue mode only
N
Resets each Viewing mode (Dynamic / Normal / Cinema) to the default
settings.
P-NR in Picture menu is reset to off.
Aspect mode is also reset to Auto aspect.
•
••
•
Bass
Increases or decreases level to enhance or minimise lower, deeper sound output
Treble
Increases or decreases level to enhance or minimise sharper, higher sound output
Balance
Adjusts volume level of right and left speakers
NICAM
NICAM (Near Instantaneous Companded Audio Multiplex)
A format for digital sound over television
Reproduces stereo sound (Off / On)
Off if reception is poor (FM monaural sound)
Analogue mode only
Mode
Sound quality can be improved when watching music scene or drama (Music / Speech)
Ambience
Provides a dynamic enhancer to simulate improved spatial effects (Off / On)
HDMI input
Select to fit the input signal
(Auto / Digital / Analogue) (p. 37)
Auto
: Automatic detection of digital or analogue sound source
Digital
: HDMI cable connection
Analogue : HDMI-DVI adapter cable connection
HDMI input mode only
••
Advanced
■ To return to the
store
(Required by some
functions)
Sound menu
Colour balance
Contrast
Brightness
Colour
Sharpness
change
Number and positions
of alternatives
EXIT
Viewing mode
Selects three different screen settings (Dynamic / Normal / Cinema)
In each Viewing mode setting, Contrast, Brightness, Colour, Sharpness, Tint (in NTSC
only), Colour balance, Colour management and 3D-COMB can be adjusted and stored
to suit your particular viewing requirement (e.g., you may require different settings for
viewing sports, films, news etc.)
Changes to any settings in a viewing mode will affect all signal sources: RF, AV1, AV2,
AV3, Component and HDMI
Changes will be stored automatically. By analysing and processing the incoming
picture, all three modes feature automatic enhancement
How to Use Menu Functions
(picture, sound quality, etc.)
Picture menu
Adjustments / Configurations (alternatives)
•
3
Select the item
Adjust by each viewing mode
Sound menu
Picture menu
Main menu
Picture menu
Item
•
In AV mode, the Sound menu gives a reduced number of options.
21
How to Use Menu Functions
•
Picture menu, Sound menu (p. 20)
OK
MENU
EXIT
1
Display menu
2
Select "Setup menu"
MENU
•
■ Menu list
Item
Menu
Displays the functions that can be set
(varies according to the input signal)
Main menu
Picture menu
Q-Link
Selects which AV terminal is to be used for data communication between this TV and a
compatible recording equipment (AV2 / AV3) (p. 36)
AV2/AV3 out
Chooses the signal to be transmitted from the TV to Q-Link (Analogue / DVB / AV1 /
AV2 / AV3 / Monitor)
Monitor: Image displayed on screen
Component / HDMI signals cannot be outputted
Control with HDMI
Control with HDMI function (Off / On) (p. 38)
Teletext
Analogue teletext display mode (FASTEXT / List) (p. 14)
Off timer
Sets the time the unit automatically turns Off. (Off / 15 / 30 / 45 / 60 / 75 / 90) (minutes)
Volume correction
Adjusts volume for AV and HDMI mode
Side panel
Increases the brightness of the side panel (Off / Low / Mid / High)
The recommended setting is "High" to prevent panel "after-image"
Power save
Reduces brightness of picture to economise on power consumption (Off / On)
Power on preference
Set to "TV" to view picture from TV tuner.
Set to "AV" to view input from an external equipment connected to a SCART terminal,
e.g. satellite receiver
(TV / AV)
The external equipment must be switched on and sending a control signal for
automatic switching at power on to occur
Tuning Menu
Edits or sets channels (Analogue) (p. 30)
select
OK
Sound menu
access
Adjustments / Configurations (alternatives)
••
Setup menu
AV2
Monitor
On
FASTEXT
Off
Off
Off
TV
select
OK
Adjust or select
OK
IDTV
■ To return to TV
■ Choose from among alternatives
Number and positions
of alternatives
at any time
EXIT
Q-Link
change or access
store
(Required by some
functions)
Setup menu
4
Q-Link
AV2 out
Control with HDMI
Teletext
Off timer
Side panel
Power save
Power on preference
Tuning Menu
Owner ID
Shipping condition
Tuning Menu
Access
Displays the next
screen
•
Note
To initialize all settings
"Shipping condition"
(p. 32).
•
22
Timer
Programming
Records future programmes (p. 34)
Profile Edit
Creates list of favourite programmes (p. 27)
Child Lock
Locks a DVB programme channel to prevent access to it (p. 27)
DVB Tuning
Menu
Auto Setup, Add New Service, New Service Message, Signal Condition (p. 28)
DVB System
Setup
Common Interface Module, Preferred Subtitles, System Update, Display Timeout
(p. 24)
Multi Audio
Chooses the sub voice for watching DVB (Alternatives vary depending on the
broadcaster)
Owner ID
Inputs the owner ID (p. 33)
Shipping condition
Resets all settings, for example, when moving (p. 32)
Advanced
MENU
■ Go to the next screen
DVB Setup Menu
previous screen
•
AV2
Changed
■ To return to the
•
How to Use Menu Functions
(picture, sound quality, etc.)
N
Setup menu
•
3
Select the item
In AV mode, the Setup menu gives a reduced number of options.
23
DVB Settings (DVB mode)
The "DVB Setup Menu" provides access to various advanced features.
DVB
Analogue
MODE
1
If in Analogue mode
2
Display the menu
The Common Interface Module menu provides access to software contained on Common
Interface (CI) Modules.
Insert the CI module (optional)
Select DVB
•
•
Pay-TV
MENU
Common
Interface
Module
EXIT
3
Select "Setup menu"
Main menu
Picture menu
OK
OK
access
select
7
Language
of subtitles
Update
unit's
software
system
Select a function and set
System
Update
Store
•
OK
access
OK
Access
select
3 seconds
If System Update is performed,
the software will be updated (it
may change TV functions). If you
do not wish to do so, set "Auto
Update Search in Standby" to
Off.
Select "Auto Update Search in Standby" and then select "On" or "Off"
System Update
Auto Update Search in Standby
System Update Search Now
Software Licence
On
set
OK
•
select
On: Automatically performs
a search in standby and
downloads an update, if any
■ To update immediately
Select "System Update Search Now"
Searches for an update (for several min.)
and displays a corresponding message if any
Downloads (for about 20 min.)
OK
Select "Software Licence"
If you exit after , the setting is not stored after
turning off the unit.
select
3 seconds
English
■ To display subtitles (p. 11)
OK
Select "System Update"
Common Interface Module
Preferred Subtitles
System Update
Display Timeout
On-screen operation guide
may not correspond to the
remote control buttons.
■ To view software licence information
Information
banner
display time
Display
Timeout
24
set
English
DVB System Setup
select
OK
red green yellow blue
DVB System Setup
Common Interface Module
Preferred Subtitles
System Update
Display Timeout
•
access
•
OK
Download new software to TV.
For details (p. 42)
Timer Programming
Access
eng
access
Select "Preferred Subtitles" and set the language
Preferred
Subtitles
DVB Setup menu
OK
OK
3 seconds
Coloured characters
EXIT
6
•
Advanced
■ To return to TV
English
Follow the on-screen instructions
OK
example: select, go
Select "DVB System Setup"
Profile Edit
Child Lock
DVB Tuning Menu
DVB System Setup
Multi Audio
and .
and .
The features that appear on
screen are dependent on the
contents of the selected CI
module.
For more details, see the
manual of the CI module, or
check with the broadcaster.
•
5
•
DVB Settings (DVB)
(pay-TV, subtitles, etc.)
select
Access
Setup menu
AV2
Monitor
On
Off
Off
Off
TV
Access
CI module
Normally pay-TV services will appear without
If pay-TV services does not appear, perform
Common Interface Module
Preferred Subtitles
System Update
Display Timeout
access
Select "DVB Setup Menu"
Q-Link
AV2 out
Control with HDMI
Off timer
Side panel
Power save
Power on preference
DVB Setup Menu
Owner ID
Shipping condition
Insert or
remove
straightly
and
completely
DVB System Setup
Setup menu
IDTV
•
•
Turn Off MAINS power On / Off switch
whenever inserting or removing the CI
module.
If a view card and a card reader
come as a set, first insert the card
reader, then insert the view
card into the card reader.
Do not insert the module up side down.
Select "Common Interface Module"
Sound menu
4
CI slot
Caution
DVB
Analogue
MODE
OK
MENU
(Rear of the TV)
Display
Set how long the information banner (p. 11) stays on screen
Select "Display Timeout" and set the time
DVB System Setup
Common Interface Module
Preferred Subtitles
System Update
Display Timeout
set
English
3 seconds
OK
•
0 (none displayed) to 10 sec.
in 1-sec. increments
select
25
Profile Edit / Child Lock
(DVB mode)
Your favourite channels can be listed, and control channel audience.
1
Create your favourite channel list (Profile) from various broadcasters (up to 4: Profile 1 to 4).
The list is added to "Category" in TV Guide (p. 12) and information banner (p. 11) and then
easily accessed.
A channel is added
Select a channel and add it to the list
If in Analogue mode
Select DVB
DVB
Analogue
MODE
Profile Editor
Profile Editor
All Services
OK
Profile 1
All Services
yellow
1 BBC ONE Wales
2 BBC 2W
7 BBC THREE
10 BBC FOUR
2
DVB
Analogue
MODE
30 CBBC Channel
Display the menu
List
favourite
channels
MENU
31 CBeebies
To change
the category
OK
MENU
1
2
3
3
Select "Setup menu"
Main menu
Picture menu
6
Sound menu
7
8
9
Setup menu
0
VCR
IDTV
4
5
6
To name the Profile
red
To move the channel
green
OK
•
access
OK
store
Confirm green
To delete the channel
yellow
To delete all channels
blue
OK
OK
Channel numbers (Known as logical channel numbers) cannot be changed, due to
broadcast restrictions.
select
You can lock specific channels and control who watches them.
(When a channel is selected, a message appears; by entering the PIN number, you can
watch the channel.)
Enter the PIN number (4 digits)
Child Lock-PIN Entry
1
2
3
Please enter new PIN
PIN
4
5
6
OK
7
8
9
****
access
0
select
•
•
Enter the PIN number twice at first
setting.
Make a note of the PIN number in
case you forget it.
•
To cancel
Select the locked channel
Select "Child Lock Service List"
Child Lock
How to set
position
VCR
eng
Select the new
Change PIN
Child Lock Service List
Control
channel
audience
access
Access
OK
select
Select the channel to be locked
Child Lock Service List
Child Lock
select
OK
Advanced
EXIT
Select the field of Profile to edit and:
•
•
Store
DVB Setup menu
Access
Access
■ To edit Profile
select
Select "Profile Edit" or
"Child Lock"
Profile Edit
Child Lock
DVB Tuning Menu
DVB System Setup
Multi Audio
31 CBeebies
blue
access
Timer Programming
■ To return to TV
30 CBBC Channel
•
•
Setup menu
AV2
Monitor
On
Off
Off
Off
TV
Access
10 BBC FOUR
To add all channels
to the list
OK
Select "DVB Setup Menu"
Q-Link
AV2 out
Control with HDMI
Off timer
Side panel
Power save
Power on preference
DVB Setup Menu
Owner ID
Shipping condition
7 BBC THREE
select
Profile Edit / Child Lock
(DVB)
5
2 BBC 2W
•
4
OK
green
red
Profile
Edit
EXIT
To display
another Profile
•
Profile 1
1 BBC 2W
1 BBC ONE Wales
1 BBC ONE Wales
2 BBC 2W
set
7 BBC THREE
30 CBBC Channel
51 BBCi
89 BBC Radio Wales
90 BBC Radio Cymru
Appears when the channel is locked
•
•
OK
To lock all channels
yellow
To cancel all channel locks
blue
■ To change the PIN number
Select "Change PIN" in
•
26
and enter a new PIN number twice.
Note
Setting "Shipping condition" (p. 32) or "DVB Auto Setup" (p. 28) erases the PIN number
and all settings.
27
DVB Tuning Menu
(DVB mode)
You can re-tune all TV channels when moving house or search for new services which may have recently
started broadcasting.
1
If in Analogue mode
Select DVB
DVB
Analogue
MODE
OK
MENU
EXIT
Main menu
Picture menu
Sound menu
OK
select
Setup menu
4
Select
"DVB Setup Menu"
5
Select "DVB Tuning Menu"
■ To return to TV
EXIT
•
28
No data is stored
if an Auto Setup
sequence is
interrupted.
6
OK
access
select
DVB Auto Setup
Automatically sets the DVB channels in the area.
The current setting is erased.
If a Child Lock PIN number (p. 27) has been set, it must be entered again.
Add New Service
Adds a new DVB station.
A new station is added to the DVB channel list, when found.
The new station is added with the current settings saved as they are.
New Service
Message
Selects whether to give a notification message
when a new DVB station is found.
(On / Off)
Selecting OK (Auto Setup) will delete current
Profile and Childlock settings.
Signal Condition
Select a channel and check the DVB signal
condition.
Use for adjusting the direction of the aerial.
Green bar
Good
Red bar
Poor (Check the aerial)
••
••
•
••
New DVB Service Found!
Press OK to start Auto Setup
Press EXIT to lgnore.
Warning! Selecting Auto Setup will delete
current Profile and Childlock settings
Signal Condition
CH30 1 BBC ONE Wales
DVB Programme
Signal Quality
Signal Strength
0
5
10
DVB Setup menu
Timer Programming
Profile Edit
Child Lock
DVB Tuning Menu
DVB System Setup
Multi Audio
OK
Access
access
select
eng
Select the function and access
DVB Tuning Menu
DVB Auto Setup
Add New Service
New Service Message
Signal Condition
Access
On
OK
change or access
Advanced
IDTV
access
Adjustments / Configurations
DVB Tuning Menu (DVB)
3
Select "Setup menu"
MENU
Item
•
2
Display the menu
DVB Tuning Menu
DVB
Analogue
MODE
Menu
select
29
Editing and Setting Channels
(Analogue mode)
The analogue channel settings can be changed according to your needs and reception conditions.
1
OK
MENU
EXIT
Programme edit
Prog.
DVB
Analogue
MODE
1
2
3
4
5
Display the menu
Edit
channels
Programme
edit
Select "Setup menu"
Select "Tuning Menu"
AV2
Monitor
On
FASTEXT
Off
Off
Off
TV
Access
Add
Move
■ To delete
select
Download
■ To change the name of the broadcaster
red
After confirming, press
displayed when selecting channels
red
Prog.
green
After confirming, press green
■ To move
OK
1
2
3
4
5
yellow
Select new
position
Lock
CH44
CH51
CH41
CH47
CH37
XYZ
FTP
123
456
Off
Off
Off
Off
Off
OK
Select the
character
Repeat
To next
character
OK
OK
■ To lock
Programme edit
Prog.
1
2
3
4
5
Automatically
transmitted
(for a few sec.)
For details (p. 36)
•
Store
Select the function
Name
Usable characters
information to a Q-Link
compatible equipment
connected to the unit
•
:
:
:
:
:
Chan.
ABCDEFGHIJKLMNOPQRST
UVWXYZ+-. 0123456789
yellow
■ To download channel
select
Select the
"Name" field
Programme edit
■ To add
access
OK
3 FTP
Cursor
blue
:
:
:
:
:
Chan.
Name
Lock
CH44
CH51
CH41
CH47
CH37
ABC
XYZ
FTP
123
456
Off
Off
Off
Off
Off
Select the
"Lock" field
OK
Select "On"
"Off" to
unlock
You cannot select the channel with numeric
buttons or the "C" button when locked.
(
OK
)
OK
Tuning Menu
Programme edit
Auto setup
Manual tuning
Access
Automatically set the channels received in the area
access
OK
Settings are made automatically
Start Auto setup
select
start
Set
automatically
How to set
EXIT
OK
WARNING
Start Auto Setup
Exit
Return
•
or
(Store)
-
Set
manually
(Change programme position or start searching channels)
(Repeat)
■ To return to TV
Programme
position (flash)
Channel number
(flash)
Channel
(Manual tuning screen)
68
Exit
Return
When the operation is completed,
the broadcast of programme
number "1" will appear.
•
•
•
The settings are
downloaded to a Q-Link
compatible equipment
connected to the unit.
All previous settings are
erased.
No data is stored if an
Auto setup sequence is
interrupted.
To freely change settings after Auto setup
(Access "Manual tuning")
(Select programme position or channel number)
Selected item will flash.
•
AUTO SETUP IN PROGRESS
SEARCHING :
PLEASE WAIT
21
(Press repeatedly until "Tuning Mode" appears)
or
CH44
All analogue tuning
data will be erased
Auto setup
For Manual tuning, using the buttons on
the front of the set ("Manual tuning" on p. 31)
30
Channel
OK
Advanced
■ To return to TV
Lock
Off
Off
Off
Off
Off
Edit
equipment
Setup menu
5
6
Name
ABC
XYZ
FTP
123
456
Editing and Setting Channels
(Analogue)
select
Setup menu
IDTV
■ Delete
■ Add
■ Move
■ Change
name
■ Lock
■ Download to
access
OK
Sound menu
Q-Link
AV2 out
Control with HDMI
Teletext
Off timer
Side panel
Power save
Power on preference
Tuning Menu
Owner ID
Shipping condition
Chan.
CH44
CH51
CH41
CH47
CH37
•
Main menu
Picture menu
4
:
:
:
:
:
Delete
MENU
3
Name
Select the channel to edit
Select Analogue
2
DVB
Analogue
MODE
Edit the analogue programme position settings
If in DVB mode
Manual
tuning
1
CH44
Select the programme position
and search through the channel
Programme
position
search
1
OK
Manual tuning
C
:
:
:
:
Search
Move cursor
To store
To exit
21
STR
0
68
Search down/up
Store
Exit
Return
9 Direct entry
Repeat
and
Channel
CH44
21
Manual tuning
-, +
TV / AV
STR
F
Store
OK
•
The
programme
position
blinks.
•
Note
If a VCR is
connected with
only the RF
cable, select
programme
position "0".
68
F
-/
+/
TV / AV
31
Restore Settings
Owner ID
Resets the TV to its original condition, i.e. no channels tuned in.
All settings other than "Owner ID" (channels, picture, sound quality, etc.) are reset.
Entry of the security code (PIN number) and "personal information" (your name, address and post code).
In the unfortunate event of theft it will help the Police to determine the owner.
If you have skipped the Owner ID input in "Auto Setup" (p. 10), and input it later, start from .
If you input the Owner ID in "Auto Setup" (p. 10), perform .
OK
MENU
EXIT
1
Display the menu
2
Select "Setup menu"
MENU
Main menu
Picture menu
OK
MENU
OK
Sound menu
2
3
4
5
6
7
8
9
Setup menu
0
VCR
access
1
2
3
4
5
6
7
8
9
Select "Owner ID"
3
Setup menu
Q-Link
AV2 out
Control with HDMI
Teletext
Off timer
Side panel
Power save
Power on preference
Tuning Menu
Owner ID
Shipping condition
0
VCR
select
Access
■ To return to TV
How to set
4
EXIT
OK
EXIT
Check the message and initialise
4
access
OK
select
Access
Enter the 4-digit PIN number of your choice
Yo u n o w h a v e t h e o p p o r t u n i t y
to enter your details and
help the police crack crime
see instruction book
All tuning data will be erased
Owner ID
:
:
:
:
∗∗∗∗
∗∗∗∗∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗∗
1
2
3
4
5
6
7
8
9
0
VCR
To change the stored information
Enter the
PIN number
0 - 9
OK
0123456789
Characters
Start
Exit
Return
Entry field
•Enter your name, address, and post code, in that order
Make a note of the PIN number in case you forget it.
Shipping
condition
Follow the on-screen instructions
•
■
"Auto Setup" will automatically start when MAINS power On / Off switch is next
turned On. (p. 10)
To re-tune TV channels only, e.g. after moving house
••
DVB: "DVB Auto Setup" (p. 28)
Analogue: "Auto setup" (p. 31)
Input
owner ID
Owner ID
OK
OK
OK
Select
the entry field
Select
character
To next
character
Store
OK
store
Advanced
PIN NUMBER
NAME
HOUSE NO
POSTCODE
OK
Restore
Settings
AV2
Monitor
On
FASTEXT
Off
Off
Off
TV
How to set
set
Shipping condition
select
S et up m enu
Owner ID
Restore Settings
■ To return to TV
AV2
Monitor
On
FASTEXT
Off
Off
Off
TV
access
OK
Sound menu
• •
Q-Link
AV2 out
Control with HDMI
Teletext
Off timer
Side panel
Power save
Power on preference
Tuning Menu
Owner ID
Shipping condition
Mai n m enu
P i ct ure m enu
access
Select "Shipping condition"
3
2
Select "Setup menu"
MENU
select
Setup menu
1
EXIT
1
Display the menu
To check the "personal information" stored
Hold down for
about 6 sec.
Displays the information
on the screen
(for several sec.)
Owner ID
NAME :
HOUSE NO :
POSTCODE :
•
The PIN number is
not displayed.
A
(Press twice)
32
33
Recording Controls
Timer Programming (DVB mode) from Menu
Start making
the settings
The Timer programming menu allows you to choose programmes that you wish to record. At the correct time, the DVB
system will switch on and tune to the correct station (even if the TV is in Standby mode). If the recording equipment is
compatible with Q-Link or similar technologies (p. 36) and connected to the TV’s AV3 terminal using a SCART cable
(p. 40), you do not need to programme the device – the DVB system will control the recording process.
TV Guide may also be used to set timer programmes. (p. 12)
If in Analogue mode
1
Select DVB
OK
MENU
EXIT
3
4
5
6
7
8
9
2
Display the menu
3
Select "Setup menu"
MENU
■ To return to TV
4
Main menu
Picture menu
recording
EXIT
The TV must either
be On or in standby.
For preparations
of a recording
equipment, read
the manual of
equipment.
select
and
Q-Link
AV2 out
Control with HDMI
Off timer
Side panel
Power save
Power on preference
DVB Setup Menu
Owner ID
Shipping condition
AV2
Monitor
On
Off
Off
Off
TV
Access
OK
access
select
Profile Edit
Child Lock
DVB Tuning Menu
DVB System Setup
Multi Audio
OK
access
6/8 FR
18:00
20:00
120 Off
3 ITV1
7/8 SA
21:30
22:30
60 Off
Store
OK
Thu 05/08/04 18:49
Date
Start
End
min.
1
BBC1
6/8 FR
18:00
20:00
120 Off
3
ITV1
7/8 SA
21:30
22:30
60 Off
OK
Select timer
0
9
•
DVB LED
Orange DVB LED
(Rapid blinking during recording)
■ To check / change / cancel a timer programming event
Ending
time
Starting
time
Subtitles
(Off / Auto)
Recording time
(automatic display)
one day ahead
OK
and press
OK
OK
and press
red
OK
in p. 12 (mode and Guide switches)
DVB Timer Programming
Channel
Select the programme to be deleted using
There are two styles of display for TV Guide (Landscape / Portrait)
34
1 BBC1
To cancel a timer programming event
eng
How to set the details
Edit timer
Exit
Return
Delete
min.
Select the programme to be changed using
Correct as necessary (as above)
Access
Timer Programming
(Timer
Programming
screen)
End
To change a timer programming event
•
Select the programme to be broadcast
set
Start
daily or weekly
(press repeatedly)
Daily SU-SA: Sunday to Saturday
Daily MO-SA: Monday to Saturday
Daily MO-FR: Monday to Friday
Weekly SA/FR/TH/WE/TU/MO/SU:
Same time on the same day every week
DVB Setup menu
select
Date
OK
Select "Timer Programming"
Pos. Name
Pos. Name
Date
Direct TV recording:
You can record the current programme to DVD Recorder or VCR immediately. (p. 36)
TV Guide–Electronic Programme Guide (EPG)–Timer Recording
Operate
Thu 05/08/04 18:49
"Timer Programming" (p. 35)
Advanced
Caution
5
6
7
access
Setup menu
■ To stop
•
•
OK
Set timer
programming
details
Select "DVB Setup Menu"
EXIT
, and can
also be entered
with numeric
buttons.
Current timer
programming
event
S e t u p me n u
VCR
GUIDE
Previous
timer
programming
event
Sound menu
0
OK
Recording Controls
2
set
select
the item
•
1
start
OK
DVB Timer Programming
DVB
Analogue
MODE
DVB
Analogue
MODE
GUIDE
OK
Repeat the operations as below,
and set items in the order of
to
••
••
•
Note
A message will appear if you try to programme a timer event which overlaps an already programmed event.
2 min. before the starting time: a reminder message appears.
OK button; To cancel the programming
EXIT button)
(To remove the message
10 sec. before the starting time: in DVB mode, the unit automatically selects the programmed channel.
Cancelling the programming may not be valid immediately before the starting time. In this case, directly operate
the recording equipment to cancel recording.
Please set the Starting time more than 2 minutes interval from the present time. If you want to record, use Direct
TV recording (p. 36).
Caution
••
No other DVB channel can be selected during recording. However you can watch analogue channels.
It may not be possible to record an encrypted programme (which is copy-protected).
35
Q-Link Functions
HDMI Functions
Q-Link connects the TV unit and VCR / DVD recorder, enables easy recording and playback.
■ Condition
•
••
■
•
■•
Use the VCR / DVD recorder with the following logos:
"Q-Link", "NEXTVIEWLINK", "DATA LOGIC", "Easy Link", "Megalogic", or "SMARTLINK"
Connect the equipment to this unit’s AV2 or AV3 terminal via a "fully-wired" SCART cable. (p. 40)
Q-Link terminal setup in Setup menu (Q-Link, AV2/AV3 out). (p. 23)
Download analogue channel settings
Perform Auto setup. (p. 31)
When first using this unit, see "Auto Setup". (p. 10)
Perform download to the equipment. (p. 31)
Features available
Some recording equipments are not applicable. Read the manuals of the equipment.
Direct TV Recording:
Recording the current programme in VCR / DVD recorder immediately.
DIRECT
TV REC
■ To change DVB channel, stop recording
EXIT
36
■ Summary of Control functions
Connections
HDMI and SCART
SCART (Q-Link) only
HDMI only
O
O
O
O
(Not when viewing HDMI input)
O
-
Theatre speaker
O
-
O
Power on link
O
O
O
Power off link
O
O
O
Analogue TV tuning download
O
O
-
Function
Easy playback
Direct TV Recording
Recording information or if recording is not possible, a message is displayed.
(Only when the programme number is "0" or "AV mode" for some equipment.)
Power
on link
and Easy
playback
When VCR or DVD recorder starts playback or direct navigator or function menu
are activated, the TV is turned on and input mode is switched automatically so
that you can view the content. (Only when TV is in Standby mode.)
Power off
link
When TV is set to Standby mode, the recording equipment is also automatically
set to Standby. (Only when the videocassette or DVD is not active.)
• "DATA LOGIC" (a trademark of Metz Corporation)
• "Easy Link" (a trademark of Philips Corporation)
Read the manuals of the equipment too.
(∗1): The HDMI logo is displayed on HDMI-compliant equipment.
(∗2): Enquire at your local digital equipment retailer shop.
Advanced
Information
/ Message
••
••
••
••
•
•
•
Note
HDMI is the world's first complete digital consumer AV interface complying with a non-compression standard.
If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adapter cable (∗2).
When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal.
Audio settings can be made on the "HDMI input" menu screen. (p. 21)
Applicable audio signal sampling frequencies (2ch L.PCM): 48 kHz, 44.1 kHz, 32 kHz
Use with a PC is not assumed.
If the connected equipment has an aspect adjustment function, set the aspect ratio to "16:9".
This HDMI connector is "type A".
An equipment having no digital output terminal may be connected to the input terminal of either "Component",
"S-VIDEO", or "Video" to receive analogue signals.
The HDMI input terminal can be used with only the following image signals:
480i, 480p, 576i, 576p, 720p and 1080i. Match the output setting of the digital equipment.
For details of the applicable HDMI signals, see p. 43.
HDMI Functions
Q-Link Functions
EXIT
When Direct TV Recording is performed, the
recording equipment is automatically turned on if it
is in Standby mode.
The recording equipment is recording from its own
tuner. You can turn the TV off during recording
(Analogue only).
If, during recording from an AV source, you turn the
TV off or change input / programmes, the recording
will be stopped.
When Direct TV Recording is performed while
watching DVB channel, the DVB programme
position is locked and no other DVB channel can
be selected. However you can watch analogue
channels.
HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound
by connecting the TV unit and the equipment.
HDMI-compatible equipment (∗1) with an HDMI or DVI output terminal, such as a set top box or a DVD player, can
be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.
About connections, see "External Equipment" (p. 40).
••
What you
see is
What you
record
DIRECT
TV REC
•
•
•
•
HDMI connection
• "Megalogic" (a trademark of Grundig Corporation)
• "SMARTLINK" (a trademark of Sony Corporation)
37
HDMI Functions (Continued)
Control with HDMI "
Control"∗
∗Enjoy additional HDMI Inter-Operability with Panasonic products which have "HDAVI Control" function.
HDMI connections to some Panasonic equipment (Panasonic DVD Recorder DIGA, Panasonic Player
theatre, Panasonic Amplifier, etc.) allow you to enjoy easy playback or home theatre.
About connections, see "External Equipment" (p. 40). Read the manuals of the equipment too.
This function needs an HDMI compliant (fully wired) cable.
Non-HDMI-compliant cables cannot be utilized.
Consult your local Panasonic dealer or refer to the URL for applicable equipment: www.panasonic.co.uk
Preparations
(For the first time / When adding new equipment, reconnecting equipment or changing setup)
Easy
playback
You can control the theatre speaker with TV’s remote control.
This function is available when Panasonic Amplifier or Player theatre is connected.
After connection turn the equipment on and then switch the TV unit on.
Select the input mode to HDMI (p. 17), and make sure that an image is
displayed correctly.
1
OK
Select "Home theatre" or "TV speaker"
Display the menu
Main menu
Home theatre
MENU
OK
■ To return to TV
4
Setup menu
38
It is recommended that you use Panasonic’s HDMI cable.
Recommended part number:
RP-CDHG15 (1.5 m)
RP-CDHG30 (3.0 m)
RP-CDHG50 (5.0 m)
Volume up / down
TV speakers are active.
When selecting "Home theatre", the sound of TV speakers is mute.
When the equipment is turned off, TV speakers will be active.
Power on
link
When the connected Panasonic equipment starts playback or direct navigator or
function menu are activated, the TV is automatically turned on. (Only when TV is in
Standby mode.)
Power off
link
When TV is set to Standby mode, the connected Panasonic equipment is also
automatically set to Standby.
OK
select
Select "On"
(default is On)
EXIT
•
••
select
Select "Control with HDMI"
AV2
Monitor
On
Off
Off
Off
TV
select
OK
select
••
••
••
••
Advanced
IDTV
Setup menu
Adjustment for equipment
(automatically turned on if it is in
Standby mode)
■ TV speaker:
access
Displayed when Amplifier or Player theatre is connected.
This may be displayed after disconnecting the equipment.
In this case, set "Control with HDMI" in Setup menu to
"Off", then set to "On" again.
Q-Link
AV2 out
Control with HDMI
Off timer
Side panel
Power save
Power on preference
DVB Setup Menu
Owner ID
Shipping condition
access
■ Home theatre:
Mute
S e tu p me n u
•
OK
Sound menu
M a i n me n u
H o me th e a tre
P ic tu re me n u
3
Picture menu
Theatre
speaker
Select "Setup menu"
Sound menu
MENU
HDMI Functions
2
Display the menu
•
MENU
Automatic Input switching-When the connected Panasonic equipment is operated,
input mode is switched automatically. When it is stopped operating, input mode is
returned.
Note
Setup the equipment to enable this function. Read the manual of the equipment.
This function may not work normally depending on the equipment condition.
This function may not work normally when Panasonic Player theatre is connected.
The equipment can be operated by TV’s remote control with this function on even if TV is in Standby mode.
Image or sound may not be available for the first few seconds when the playback starts.
Image or sound may not be available for the first few seconds when Input mode is switched.
Volume function will be displayed when adjusting the volume of the equipment.
Easy playback is also available by using the remote control for Amplifier. Read the manuals of Amplifier.
39
External Equipment
These diagrams show our recommendations for how to connect the TV unit to your various equipment.
For other connections, consult the instructions for each piece of equipment, the table below, and the specifications (p. 47).
To watch satellite broadcasts
Satellite receiver
Rear of the TV
Fully wired HDMI
compliant cable
To record / playback
DVD Recorder / VCR
SCART
cable
RF cable
or
SCART
cable
SCART
cable
Control with HDMI (p. 38)
DVD recorder or AV amplifier
AV
AV 1
AV 2
Amplifier with speaker system
AV 3
(Q-Link)
COMPONENT
Y
AUDIO
IN
L
PB
L
R
PR
R
AUDIO
RGB
VIDEO
VIDEO
S-VIDEO
RGB
VIDEO
S-VIDEO
VIDEO
AUDIO
External Equipment
(Q-Link)
•
Fully wired HDMI
compliant cable
To listen with speakers
To watch DVDs
Advanced
DVD player
■Types of connectable equipment to each connector
Connector
Recording / Playback
(equipment)
AV1
AV2
AV3
Y
PB
COMPONENT
PR
To record / playback videocassettes / DVDs
(VCR / DVD recorder)
To watch DVDs (DVD player)
To watch camcorder images (Video camera)
To watch satellite broadcasts (Set top box)
To play games (Game equipment)
Q-Link
Direct TV Recording
Control with HDMI
40
: Recommended Connection
41
Technical Information
Aspect Ratio
SCART and HDMI terminal information
The optimum size and aspect can be chosen, and you can enjoy finer images. (p. 11)
■Auto aspect: Auto aspect determines the best aspect ratio to use to fill your screen. It does this using a four step
process to determine if the picture being viewed is a widescreen picture.
If Auto aspect detects a widescreen signal it switches into the appropriate 16:9 or 14:9 widescreen mode. If Auto aspect
does not detect a widescreen signal then this advanced TV set enhances the picture for optimum viewing pleasure.
The text shown on the screen indicates how Auto aspect determined which ratio to use:
"WIDE" appears in the top left of the screen if a widescreen identification signal (WSS) is found or a signal found
through a SCART terminal. Auto aspect switches to the appropriate 16:9 or 14:9 widescreen ratio. This function
will also work in any aspect mode. "Auto aspect" appears in the top left of the screen if black stripes above and
below the picture are detected. Auto aspect chooses the best ratio and expands the picture to fill the screen. This
process can take several minutes, depending on the darkness of the picture.
Aspect Control Signal
Control signal through SCART
Widescreen signal (WSS)
(pin 8) or HDMI terminal
Aspect modes
Signal name
TV/AV1/
AV2/AV3
PAL I
PAL 525/60
DVB
M.NTSC
NTSC(AV input only)
525(480)/60i
525(480)/60p
625(576)/50i
625(576)/50p
750(720)/50p
750(720)/60p
1125(1080)/50i
1125(1080)/60i
SD
HD
Component/HDMI
Note
Auto aspect
Auto aspect
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
-
O
-
O
-
O
-
O
-
-
O
O
-
O
O
-
O
O
-
AV2
O
O
-
O
O
-
AV3 HDMI
O
O
-
O
O
-
O
O
O
O
O
O
O
O
The ratio varies depending on the programme, etc. If the ratio is greater than the standard "16:9",
black bands may appear at the top and bottom of the screen.
If the screen size looks unusual when a widescreen-recorded programme is played back on a VCR,
adjust the tracking of the VCR. (See the VCR manual.)
Aspect mode can be memorized for SD (Standard definition) and HD (High definition) signals separately.
To select the ratio manually:
16:9
The best ratio
is chosen and
the picture
expanded to
fill the screen.
16 : 9
Zoom2
Zoom2
14:9
Directly displays
the image at
"16:9" without
distortion
(anamorphic).
Displays a
"16:9" letterbox
(anamorphic)
image fullscreen without
distortion.
14 : 9
Zoom3
Zoom3
Socket Earth
CVBS out (video)
CVBS earth
Red in
Red earth
Green in
Green earth
Blue in
Blue earth
Audio out (L)
Audio out (R)
21
19
17
15
13
11
9
7
5
3
1
4:3
Displays the
image at the
standard "4:3"
without
distortion.
Displays a "2.35:1"
letterbox (anamorphic) image full-screen
without distortion. At "16:9", displays the
image at its maximum (with slight
enlargement).
Updating the DVB software
From time to time, a new version of software for DVB mode may become available for download to enhance
performance or operations of the TV.
A notification banner will appear when you tune to one of the BBC channels, or you can search for a new version
software by using the "System Update Search Now" function (p. 25).
New version 1.00 found.
20
18
16
14
12
10
8
6
4
2
CVBS in (video)
RGB status earth
Status RGB
Earth
--Status CVBS
Audio in (L)
Audio earth
Audio in (R)
■ AV3 SCART terminal
AV3 - Pins 15 and 20 are dependent on AV3 S-VHS /
VIDEO switching.
Socket Earth
CVBS out (video)
CVBS earth
Red in, S.C. - in
Red earth
Green in
Green earth
Blue in
Blue earth
Audio out (L)
Audio out (R)
21
19
17
15
13
11
9
7
5
3
1
20
18
16
14
12
10
8
6
4
2
AV2 - Pins 15 and 20 are dependent on AV2 S-VHS /
VIDEO switching.
Socket Earth
CVBS out (video)
CVBS earth
S.C. - in
Earth
-Earth
-Earth
Audio out (L)
Audio out (R)
21
19
17
15
13
11
9
7
5
3
1
20
18
16
14
12
10
8
6
4
2
CVBS in (video)
Earth
-Earth
-Q-Link data
Status CVBS
Audio in (L)
Audio earth
Audio in (R)
■ HDMI terminal
(RGB, VIDEO, S-VIDEO, Q-Link)
CVBS in (video)
Earth
Status RGB
Earth
-Q-Link data
Status CVBS
Audio in (L)
Audio earth
Audio in (R)
Hot Plug Detect
DDC/CEC Ground
SCL
CEC
TMDS Clock Shield
TMDS Data0−
TMDS Data0+
TMDS Data1 Shield
TMDS Data2−
TMDS Data2+
19
17
15
13
11
9
7
5
3
1
18
16
14
12
10
8
6
4
2
+5V Power
SDA
Reserved (in cable but N.C. on device)
TMDS Clock−
TMDS Clock+
TMDS Data0 Shield
TMDS Data1−
TMDS Data1+
TMDS Data2 Shield
Input signal that can be displayed
4:3
Displays the
image at the
standard
"14:9" without
enlargement.
(VIDEO, S-VIDEO, Q-Link)
Suitable inputs for AV1 include RGB (Red / Green / Blue).
∗ Mark: Applicable input signal for Component (Y, PB, PR) and HDMI
Signal name
525 (480) / 60i
525 (480) / 60p
625 (576) / 50i
625 (576) / 50p
750 (720) / 60p
750 (720) / 50p
1,125 (1,080) / 60i
1,125 (1,080) / 50i
Note
••
Horizontal frequency (kHz)
Vertical frequency (Hz)
Component
HDMI
15.73
31.47
15.63
31.25
45.00
37.50
33.75
28.13
59.94
59.94
50.00
50.00
60.00
50.00
60.00
50.00
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
Signals other than above may not be displayed properly.
The above signals are reformatted for optimal viewing on your display.
Technical Information
Displays a
"16:9" letterbox
or "4:3" image
without
distortion.
Zoom1
4:3 Zoom1 Zoom2 Zoom3 TV AV1 AV2 AV3 Component AV1
■ AV2 SCART terminal
(RGB, VIDEO)
•
Zoom1
•
•
••
Auto
aspect 16:9 14:9
O
O O
O
O O
O
O O
O
O O
O
O O
O
O O
O
O O
O
O O
O
O O
O
O O
O
O O
O
O O
O
O O
■ AV1 SCART terminal
Do you really want to update the software and reboot the system?
Press OK to download the new version
Press EXIT to lgnore
To download any new software automatically, ensure that the "Auto Update Search in Standby" function in the
System Update menu is set to "On" (p. 25).
The TV will then download new software automatically at night if it is left in standby without any timer programme
in progress.
Note
42
•
FAQs, etc.
To start downloading press "OK", this may take up to 20 minutes to
complete.
To ignore the new software press "EXIT", but this banner will keep
appearing during the period of new software availability, usually 2 to 3 days.
During software download and update, DO NOT switch off the TV.
43
FAQs
Before requesting service or assistance, please follow these simple guides to resolve the problem.
If problem still persists, please contact your local Panasonic dealer or Panasonic Customer Care Centre
for assistance. For details (p. 48)
Screen
White spots or shadow
images (noise)
Problem
Chaotic image, noisy
••
Set "P-NR" in the Picture menu (to remove noise). (p. 21)
Check nearby electrical products
(car, motorcycle, fluorescent lamp).
No image can be
displayed
•
Is "Colour" or "Contrast" in the Picture menu set to the
minimum? (p. 21)
Blurry or distorted image
•
••
(no sound or low volume)
Sound
•
Check the position, direction, and
connection of the aerial.
Neither image nor
sound is produced
Auto aspect
•
Auto aspect is designed to provide you
with the best aspect ratio to use to fill your
screen. For user control please see p. 42.
Using TV/AV button please confirm your selection is
S-Video I.e. AV2/S-Video or AV3/S-Video (p. 17).
Time:
••
•
19:30
21:30
•
You can simply clear these by pressing
Press again to redisplay.
Direct TV record / Q-Link functions
not recording
•
Please confirm SCART cable and connection. Also please
set "AV2/AV3 out" in the Setup menu (p. 22).
Actions
•
•
Due to production process involved in this technology
this may result in some pixels which are permanently lit
or unlit. This is not a malfunction.
•
•
Sound is unusual
•
••
Set the sound setting of the connected equipment to
"2ch L.PCM".
Check the "HDMI input" setting in the Sound menu. (p. 21)
If digital sound connection has a problem, select
analogue sound connection. (p. 21)
Pictures from external
equipment are unusual
when the equipment is
connected via HDMI
••
••
"Control with HDMI"
function does not work
••
Switch the TV unit on again with the equipment on.
Set "Control with HDMI" to "Off", then set to "On"
again. (p. 38)
TV unit goes into
"Standby mode"
••
The sleep function is activated.
The TV unit enters "Standby mode" about 30 min.
after broadcasting ends.
The remote control
does not work
••
Is the HDMI cable connected properly? (p. 40)
Turn Off the TV unit and equipment, then turn them On
again.
Check an input signal from the equipment. (p. 43)
Use an equipment compliant with EIA/CEA-861/861B.
Are the batteries installed correctly? (p. 6)
Has the TV unit been switched On?
FAQs, etc.
•
Other
Contrast is reduced
The function to prevent after-image (p. 5) is activated.
(Not a faulty symptom)
The screen saver is activated when the following
conditions without any user operation for a few minutes:
● no signal in DVB or AV mode
● selected locked channel
Contrast is lowered when the following conditions
without any user operation for a few minutes:
● selected radio channel
● displayed menu (except Tuning menu, Owner ID and
Shipping condition)
● selected invalid or bad signal channel
Sound signal reception may be deteriorated.
Set "NICAM" (p. 20) in the Sound menu to "Off".
(Analogue only)
Check "Signal Condition". (p. 28)
If "Signal Quality" or "Signal Strength" are displayed in
red, check aerial.
If problem persists, consult your local Panasonic dealer.
Use the remote control to turn Off the TV unit, then turn
it On again.
Interference or
frozen / disappearing
image in DVB
.
HDMI
Screen
44
21:00
••
Due to the digital reception technologies involved, quality of the DTV signals may be relatively low in
some cases, despite good reception of analogue programmes.
On Screen messages - I.e. AV1/EC1
•
Permanently lit spots on
screen
20:30
Prog. type
All Types
Check the DVB transmitter.
Adjust the direction of the aerial to another transmitter installed nearby.
Check the analogue broadcast.
If the image quality is poor, check the aerial and consult your nearest dealer.
Problem
logo appears at the
four corners of the screen
20:00
•
Wed 12/05/04 10:46
Category
All Services
Sound level is low
or sound is distorted
Is "Sound Mute" active? (p. 7)
Is the volume set to the minimum?
Frequently Asked Questions
•
DVB TV Guide :Landscape
Wed 12th
No sound is produced
Reset channels. (p. 28 and p. 30)
•
S-Video / black and
white picture
No programmes shown on TV Guide
DVB
••
••
•
Is the unit in "AV mode"?
Is the mains lead plugged into the socket outlet?
Is the TV unit turned On?
Check Picture menu (p. 20) and volume.
Check all required SCART cables and
connections are firmly in place.
Actions
45
On screen messages
On screen
messages
Problem
All tuning data will be erased
Are you sure ?
Are you sure you want to delete this timer ?
Press OK to delete timer
Press Exit to return
Bad Signal
DOWNLOAD IN PROGRESS PLEASE WAIT
DVB Tuner Locked
This programme is locked for recording
Feature not available
Incorrect PIN Number
Invalid DVB Channel
Invalid system time. Please exit !
Max number of Timer already set !
New DVB Service Found!
Press OK start Auto Setup
Press EXIT to Ignore.
Warning! Selecting Auto Setup will delete
current Profile and Childlock settings
New version 1.90 found.
Do you really want to update the
software and reboot the system ?
Press OK to download the new version
Press EXIT to Ignore
No DVB Service found
No module inserted
No recording -Check Tape or Disc
No Service
No Signal
Please check aerial or local
DVB service availability.
Press OK to start Auto Setup
Please check settings and connections on HDMI devices.
Recording in progress
Recording stopped - TV source changed
Software successfully updated
Press EXIT to continue
This service is locked!
Press OK to enter PIN
Timer overlap!
Unable to download, Check Equipment
WARNING
All analogue tuning data will be erased
46
WARNING
All digital tuning data will be erased
•
•
•
The signal is weak. Check the aerial.
Q-Link channel download is in progress.
If you want to unlock, cancel Direct TV Recording (p. 36) or
Timer Programming (p. 34).
Check the Q-Link connection and setting (p. 36).
The impossible source (Component / HDMI) to be record.
The PIN number you entered is wrong.
Invalid DVB channel is selected.
Cannot get the time information. Check the connection of the RF cable.
Maximum timer programming event is 8.
C
Category list ········· 12
Child Lock ············· 27
CI module ············· 25
Clamper ·············· 6, 9
Component ··········· 43
Connection ········· 8, 40
Control with HDMI ·· 38, 40
D
Direct TV Recording ···36
Display Timeout ·····25
Download to equipment
··················· 10, 31
DVB Auto Setup ··· 28
DVB LED ·········· 7, 13
DVB settings ········· 24
DVB Tuning Menu ··· 28
DVI························ 37
There is a new DVB station.
NTSC ·············· 18, 47
E
External equipment
························ 8, 40
External input ·····17, 29
F
H
FAQs················44-45
I
Information banner ···· 11
Input signal ··········· 43
L
Licence ················· 48
Lock ······················ 31
Q
Q-Link ··················· 36
Quick Start Guide··6-10
M
Mains Lead ········· 6, 8
Maintenance ··········· 5
Manual tuning ··· 30, 31
Menu Functions ···18-23
R
Remote control ··· 6, 7
RGB ························ 8
S
Sales and Support Information
························· 48
Satellite receiver ·9, 17, 40
SCART ············· 8, 43
Shipping condition ·······32
N
HDMI ···············37-39
Hold ················ 11, 16
Home theatre ········ 38
O
Off timer ················ 23
On / Off switch ·· 7, 11
Optional accessories ·· 6
Owner ID ········ 10, 33
P
PAL ······················· 47
PIN number ··10, 27, 33
P-NR ····················· 21
Power LED ······· 7, 10
Profile Edit ············ 27
Programme edit ········· 31
New Service Message ·· 28
NICAM ·················· 21
Normalise ········· 7, 20
Signal Condition ··· 28
Specifications ······· 47
Subtitles ·········· 11, 16
S-video ··················· 8
System Update ·· 25, 42
T
Teletext ············14-16
Timer programming ·· 13, 34
TV Guide ········ 12, 13
TV speaker ··········· 39
Type list ················ 12
U
V
Update the software ··25, 42
W
Z
WSS ····················· 42
Videos··············· 8, 17
Viewing mode ······· 21
Zoom ·············· 11, 42
There is a new software available.
No DVB signal can be found in Auto Setup.
Check the CI module inserted completely (p. 25).
The tape or disc may be "write protected", missing or damaged.
The equipment may already be recording.
The recording cannot be done by any reason. Check the equipment.
Disc or tape may be full.
The station stops the services.
Check the connection of the RF cable.
Please follow the message.
If it is still failed, consult your local Panasonic dealer.
Communication error in Control with HDMI function (p. 38).
No analogue signal can be found in Auto setup.
A function is in progress.
The recording equipment is recording the programme signal from
its own tuner. You can turn the TV off and leave the equipment
recording in the normal way.
Direct TV recording (analogue mode) will stop if channel or input
source is changed.
The software updating is finished.
Perform "System Update Search Now" in System Update (p. 25).
If it is still failed, there may not be the new software.
The selected channel is locked in Child Lock (p. 27).
Starting time in Timer Programming is already past. Set correctly (p. 35).
This message will appear 2 minutes before timer programming
event due to start.
Set Starting and Ending times in Timer Programming correctly (p. 35).
The timer programme events are overlapped. Cannot record
other channel at the same time. Check the Starting and Ending
times in Timer Programming (p. 35).
The tape or disc is active. Stop the equipment and try again.
Auto setup will be erased all present analogue tuning data
(p. 31).
DVB Auto Setup will be erased all present DVB tuning data
(p. 28).
Specifications
Source / Average
Standby condition
Drive method
Ratio
Visible screen size
(No. of pixels)
Speaker / Output
Receiving Systems /
Band name
Aerial - Rear
Operating Conditions
AV1 (Scart terminal)
TH-37PD60B
AC 220-240 V, 50 / 60 Hz / 215 W
TH-42PD60B
AC 220-240 V, 50 / 60 Hz / 247 W
0.3 W (Without DVB recording) / 20 W (With DVB recording)
AC type
16:9 (Aspect Ratio) / Max 10000:1 (Contrast Ratio)
94 cmV
106 cmV
818 mm (W) × 461 mm (H) ×
920 mm (W) × 518 mm (H) ×
939 mm (diagonal)
1,056 mm (diagonal)
408,960 (852 (W) × 480 (H)) [2,556 × 480 dots]
12 cm × 6 cm × 2 pcs, 8 Ω / 20 W (10 W + 10 W)
PAL I
PAL 525/60
: UHF E21-68.
: Playback of NTSC tape from some PAL Video recorders (VCR) or NTSC
disc playback from DVD player and recorder.
DVB
: Digital terrestrial services via UHF aerial input.
M.NTSC
: Playback from M.NTSC Video recorders (VCR).
NTSC (AV input only) : Playback from NTSC Video recorders (VCR).
UHF
Temperature : 0 °C - 40 °C
Humidity : 20 % - 80 % RH (non-condensing)
21 Pin terminal (Audio/Video in, Audio/Video out, RGB in)
AV2 (Scart terminal)
21 Pin terminal (Audio/Video in, Audio/Video out, S-Video in, Q-Link)
AV3 (Scart terminal)
21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, S-Video in, Q-Link)
COMPONENT Y 1.0 V[p-p] (including synchronization)
Others HDMI
AUDIO L - R
Output AUDIO L - R
Dimensions ( W × H × D )
Weight
Note
•
•
PB, PR ±0.35 V[p-p]
TYPE A Connector
RCA PIN Type × 2
0.5 V[rms]
RCA PIN Type × 2
968 mm × 641 mm × 97 mm
25.0 k Net
0.5 V[rms] (high impedance)
1,068 mm × 701 mm × 97 mm
29.0 k Net
Design and Specifications are subject to change without notice. Weight and Dimensions shown are
approximate.
This equipment complies with the EMC standards listed below.
EN55013, EN61000-3-2, EN61000-3-3, EN55020.
FAQs, etc.
Timer already expired !
Timer Event Due to Start
1: BBC1 has been
Programmed for recording at 20:00
Timer incorrect !
Make sure the deleting programme event is with your desire.
Connection Terminals
Software Update failed. Please try again later.
Press EXIT to continue
Make sure the operation is with your desire.
DVDs ···················· 17
Index
Specifications
On screen messages
Please wait.
Accessories ············ 6
Add New Service ·· 28
Ambience ············· 21
Aspect ············ 11, 42
Auto Setup··· 10, 28, 31
AV2/AV3 out ··· 23, 36
• •
•
No stations found
Please insert the aerial
•
•
•
•
••
•
•
•
•
•
•
•
•
•
•
•
•
•
••
A
Power Display panel
No recording - UNKNOWN REASON
•
•
•
•
•
•
••
•
•
•
•
•
Actions
/ Meanings
Actions
"Shipping condition" will erase all tuning data.
Index
47
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement