Panasonic TH50PV60E Operating Instructions

Panasonic TH50PV60E Operating Instructions
Information on Disposal for Users of Waste Electrical & Electronic Equipment
(private households)
This symbol on the products and/or accompanying documents means that used electrical and
electronic products should not be mixed with general household waste.
For proper treatment, recovery and recycling, please take these products to designated collection
points, where they will be accepted on a free of charge basis. Alternatively, in some countries you
may be able to return your products to your local retailer upon the purchase of an equivalent new
product.
Disposing of this product correctly will help to save valuable resources and prevent any potential negative
effects on human health and the environment which could otherwise arise from inappropriate
waste handling. Please contact your local authority for further details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
Operating Instructions
Plasma Television
Model No. TH-50PV60E
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further
information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of
disposal.
DIRECT TV REC
GUIDE
TV/AV
OK
MENU
TEXT
EXIT
F.P.
INDEX HOLD
1
2
3
4
5
6
7
8
9
C
0
VCR
ASPECT
N
REC
VCR
DVD
PROGRAMME
TV
Customer’s Record
The model number and serial number of this product may be found on its rear panel. You should note this serial
number in the space provided below and retain this book, plus your purchase receipt, as a permanent record
of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number
Serial Number
English
Matsushita Electric Industrial Co., Ltd.
Web Site : http://www.panasonic-europe.com
© 2006 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
Printed in Czech Republic
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
Turn your own living room into a movie theatre!
Experience an amazing level of multi-
media excitement
Contents
Be Sure to Read
Enjoy rich multi-media
Personal
computer
Set top box
Safety Precautions ······································ 4
(Warning / Caution)
Notes ··························································· 5
Maintenance ··············································· 5
Quick Start Guide
Accessories / Options ·········· 6
Identifying Controls ··············· 7
Connection ································ 8
Auto Setup ································· 9
DVD recorder
Quick Start Guide
Camcorder
•
••
Amplifier with
Speaker system
VCR
DVD player
Basic Features
••
•
Watching TV ·············································· 10
Watching Videos and DVDs ······················ 11
Viewing Teletext ········································ 12
Viewing
Enjoy your TV!
Advanced Features
How to Use Menu Functions ····················· 14
(picture, sound quality, etc.)
Editing and Setting Channels ······················ 16
Displaying PC Screen on TV····················· 19
External Equipment ··································· 20
(Q-Link / Control with HDMI / Connections)
••
••
2
Technical Information ································ 26
FAQs ························································· 29
Licence ······················································ 31
Specifications ············································ 31
FAQs, etc.
FAQs, etc.
Advanced
•
••
•
3
Safety Precautions
Notes
Warning
Caution
When cleaning the TV unit, remove the
mains plug
Handling the mains plug and lead
Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fire.)
Ensure that the mains plug is easily accessible.
Ensure the grounding pin on the mains plug is securely connected to prevent electrical shock.
An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection.
Do not touch the mains plug with a wet hand. (This may cause electrical shock.)
Do not damage the mains lead. (A damaged lead may cause fire or electrical shock.)
Do not move the TV with the lead plugged in the socket outlet.
Do not place a heavy object on the lead or place the lead near a high-temperature object.
Do not twist the lead, bend it excessively, or stretch it.
Do not pull on the lead. Hold onto the mains plug body when disconnecting lead.
Do not use a damaged mains plug or socket outlet.
(Cleaning an energized unit may cause electrical shock.)
When TV will not be used for a long
time, remove the mains plug
This TV will still consume some power even in the
Off mode, as long as the mains plug is still
connected to a live socket outlet.
Allow sufficient space around the unit
for radiated heat
Remember not to keep still pictures on
the screen for extended lengths of time
Such still pictures cause after-images on the plasma
screen if they are displayed for a long time. These
after-images are not considered malfunctions and are
not covered by the warranty.
Typical still images
Channel number and unique logos
Image displayed in 4:3 mode
Video game
Computer image
4:3
12
10
10
10
7
6
Do not block the rear air vents
If you find any
abnormality, remove
the mains plug immediately!
(cm)
Blocked ventilation by curtains, etc. may cause
overheating, fire or electrical shock.
To decrease the chance of after-images, a screen saver will
be automatically activated after a few minutes if there is no
signal and if there is no operation in AV mode. (p. 29)
The screen saver will be automatically deactivated when a
signal is detected or an operation is executed.
Keep the unit away from these equipment
Electronic equipment
In particular, do not place video equipment near the unit
(electromagnetic interference may distort images / sound).
Equipment with an infrared sensor
This TV also emits infrared rays (this may affect
operation of other equipment).
(such as strange smell or smoke)
AC 220-240 V
50 / 60 Hz
Maintenance
First, remove the mains plug from the socket outlet.
Display panel
Do not remove covers
NEVER modify the unit yourself
(High-voltage components may cause serious
electrical shock.)
Have the unit checked, adjusted, or repaired at
your local Panasonic dealer.
Do not place foreign objects
inside the unit
Do not let metal or flammable objects drop into the unit
through the air vents (fire or electrical shock may result).
Do not expose to direct sunlight
and other sources of heat
Avoid exposing the TV set to direct sunlight and other
sources of heat. To prevent fire never place any type
of candle or naked flame on top or near the TV set.
4
Daily care: Gently wipe the surface clean of dirt by using a soft cloth.
Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or water containing a
small amount of neutral detergent. Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.
Keep liquids away from the TV
To prevent damage which may result in fire or
shock hazard, do not expose this appliance to
dripping or splashing.
Do not place containers with water (flower vase,
cups, cosmetics, etc.) above the set. (including on
shelves above, etc.)
Do not place the TV on an unstable
surface
Use only the dedicated stands /
mounting equipment
Using an unauthorized stand or other fixtures may
make the unit shaky, risking injury. Be sure to ask
your local Panasonic dealer to perform setup.
Use optional stands / mounts (p. 6).
Caution
•
•
The surface of the display panel has been specially treated and may be easily damaged.
Do not tap or scratch the surface with your fingernail or other hard object.
Use care not to subject the surface to bug repellent, solvent, thinner, or other volatile substances
(this may degrade surface quality).
Cabinet
Daily care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent.
Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.
Caution
•
•
•
Use care not to subject the TV unit's surfaces to detergent.
(A liquid inside the TV unit could lead to product failure.)
Use care not to subject surfaces to bug repellent, solvent, thinner, or other volatile substances
(this may deteriorate the surface by peeling the paint).
Do not allow the cabinet to make contact with a rubber or PVC substance for a long time.
Mains plug
Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fire or electrical shock.)
5
Accessories / Options
Standard accessories
Remote Control
Transmitter
•
OK
EUR7651090
1
2
3
4
5
6
7
8
9
C
0
Identifying Controls
Store setting (p. 18)
Used to store tuning and
other function settings
Check that you have the accessories and items shown
Operating Instructions
Batteries for the Remote
Control Transmitter (2)
Pan European Guarantee Card
•
(
)
Function
select
(
)
Volume / Contrast / Brightness / Colour / Sharpness
/ Tint (NTSC mode) / Bass / Treble / Balance /
Tuning mode (p. 18)
R6 (UM3)
AV4
S-V
V
L
R
N
On / Off
switch
TV
Clamper (2)
Mains Lead
Ferrite core
•
Selects programmes in sequence
C.A.T.S. (Contrast Automatic Tracking System) sensor
(senses brightness to adjust picture quality in "Auto" viewing mode) (p. 14)
Remote control
signal receiver
Attaching the cable clampers
Rear of the TV
Sound mute On / Off
Switches TV to On or Standby
(On / Off switch in On position)
Pull
open
DIRECT TV Recording
GUIDE
TV/AV
Programme Guide (p. 10)
2
Snap open
+
-
MENU
EXIT
EXIT (Returns to TV screen)
Press to access the Picture, Sound and
(Setup
)
menus
Remove from the TV unit
Coloured buttons
Teletext (p. 12)
+
TEXT
F.P.
INDEX HOLD
-
Note the correct
polarity (+ or -)
Push both side
hooks and pull
out
Snap shut
Caution
•
••
••
Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control unit.
Do not mix old and new batteries.
Do not mix different battery types (such as
alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd) batteries.
Do not burn or breakup batteries.
TY-ST50P600W
Do not bundle the RF cable and mains lead together (could cause
distorted image).
Fix cables with clampers as necessary.
When using the optional accessory, follow the option’s assembly
manual to fix cables.
Plasma TV stand
TY-S50PX60W
Wall-hanging
bracket
(vertical)
TY-WK42PV3W
TY-ST50P60W
(p. 12)
(p. 10)
Optional accessories
Pedestal
Viewing a favourite teletext channel
Changes programme / channel
•
••
Switches TV/AV
(To watch videos or DVDs) (p. 11)
OK
MENU
Close
)
(angle)
1
2
3
4
5
6
Direct channel access
(
Still Picture (p. 10)
Teletext Index (p. 12)
7
During normal TV viewing or when in the
Tuning, Programme edit or Manual tuning
menus, press and then enter channel number
using the numeric buttons
Press twice to change to the Cableband mode
(used for various functions)
(for example, see p. 12)
Identifying Controls
Accessories / Options
Select / OK
Hook
To immediately record programme
in VCR / DVD recorder with Q-Link
connection
(p. 20)
(
••
DIRECT TV REC
Quick Start Guide
(standby: red)
1
Swing up the door at "PULL".
J0KF00000018
Power lamp
Installing remote's batteries
Switches TV/AV
AV4 terminals (p. 24)
Headphones jack (p. 24)
)
8
9
Programme Information (p. 10)
0
C
VCR
Volume
Selects programmes in sequence
ASPECT
Normalizes (p. 14)
(Resets settings)
Changes aspect ratio (p. 10)
N
REC
PROGRAMME
VCR
DVD
VCR / DVD operations (p. 11)
TY-WK42PR2W
Caution
6
•
•
•
In order to maintain the unit’s performance and safety, be absolutely sure to ask your dealer or a licenced
contractor to secure the wall-hanging brackets.
Carefully read the instructions accompanying the plasma TV stand or pedestal, and be absolutely sure to take
steps to prevent the TV from tipping over.
Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.
TV
7
Connection
Auto Setup
External equipments and cables shown in this manual are not supplied with this TV.
Please ensure that the unit is disconnected from the mains before attaching or disconnecting any leads.
Search and store TV channels automatically.
These steps are not necessary if the setup has been completed by your local dealer.
■ Watching TV
VHF / UHF aerial
Rear terminal portion
(enlarged view)
Rear of the TV
1
Turn the TV On with the On / Off switch
2
Select your country
•
•
Land
Deutschland
Österreich
France
Italia
España
Portugal
Nederland
Danmark
Sverige
Norge
Suomi
Belgien
Schweiz
ELLADA
Polska
Česká republika
Magyarország
E.Eu
AV2 AV3
•
To unfasten
1
2
3
4
5
6
7
8
9
Start ATP
Suchlauf
Abbruch
•
For Belgium, Switzerland
and E.Eu, select the desired
language
To set manually
green
(p. 18)
0
Start Auto Setup
red
CH12
AUTO SETUP IN PROGRESS
SEARCHING :
PLEASE WAIT
•
Auto Setup will start to search
for TV channels and store them.
Auto Setup
Connection
3
Connect to AV2
or AV3 for a unit
supporting
Q-Link (p. 20).
••
VCR
•
Quick Start Guide
select
OK
Fastener
You can now use the remote
control to turn On the unit or
turn the unit to standby mode.
(Power lamp: On)
TV
02
78:01
41
Exit
SCART cable
(fully wired)
Mains lead
DOWNLOAD IN PROGRESS
PLEASE WAIT
Programme : 63
Remote control unavailable
(Connect after all the other connections.)
•
If Q-Link (p. 20) equipment is
connected, channel information
is automatically downloaded to
the equipment.
■ To record TV
programmes
Need help
with operations?
RF OUT
(example: Sound menu)
RF cable
DVD Recorder or VCR
RF IN
Sound menu
Bass
Treble
Balance
Headphone volume
MPX
Mode
Ambience
No service
Music
Off
Auto Setup is now
complete and your
TV is ready for viewing.
•
To edit channels
"Programme edit" (p. 16)
Select
Adjust
Exit
Return
On-screen operation
guide will help you.
8
9
Watching TV
1
2
GUIDE
OK
Watching Videos and DVDs
Turn power on
It is possible to connect a variety of external equipment to the TV unit. Once the equipment is connected,
use the following procedure to view the input.
To connect the equipment (p. 24)
(for about 1 second)
On / Off switch on unit should be On.
1
Select a programme number
up
or
EXIT
down
1
2
3
4
5
6
7
8
9
With the equipment turned On
Select the external input
(AV mode screen)
TV/AV
TV/AV
OK
0
VCR
■ To select the two-digit programme number, e.g. 39
HOLD
2
3 → 9 (in a short time)
1
2
3
4
5
6
7
8
9
C
0
Select the connector
connected to the equipment
Displays the selected connector
blue
Select from the Programme table
red
VCR
select page
GUIDE
Volume
HDMI1/2
select programme
OK
ASPECT
REC
Programme Guide
TV
:
:
:
:
:
:
:
:
:
:
:
:
:
Name
Chan.
CH21
Das Erste CH44
ZDF
CH51
RTL
CH41
CH47
CH23
CH26
CH58
-
VCR
DVD
PROGRAMME
Prog.
13
14
15
16
17
18
19
20
21
22
23
24
:
:
:
:
:
:
:
:
:
:
:
:
Name
Chan.
•
-
AV3/
AV2/
S-video S-video
example: AV1
PC
TV
To return to TV
VCR
DVD
)
Display
status
information
HOLD
Display / hide status information
•
Displayed information:
Programme number / Programme name / Channel number / MPX mode
(p. 14) / Sound system (p. 14) / Aspect mode
•
Change the aspect ratio (p. 26)
ASPECT
Change
aspect
ratio
14 : 9
•
Each press changes the mode.
Auto aspect / 16:9 / 14:9 / Just / 4:3 / 4:3 Full
(HD signal only) / Zoom1 / Zoom2 / Zoom3
While the bar is displayed
(
red green
10
)
•
•
Note
Automatic Input selection
- Input mode is automatically
switched from TV to AV
mode when the equipment
connected via SCART or HDMI
terminal is operated. When the
equipment is turned off, the TV
is set to TV mode.
If the external equipment
has an aspect adjustment
function, set to "16:9".
For details, see the manual
of the equipment or ask your
local dealer.
AV4/ Component/ HDMI1/
HDMI2
S-video
PC
red
blue
yellow
(twice)
Some Panasonic VCR and DVD equipment connected to the TV unit
can be directly operated with the remote control.
Freeze / unfreeze picture
Hold
blue
PROGRAMME
REC
VCR / DVD switch
Select VCR / DVD
Standby
Set to Standby mode / Turn on
Play
Playback VCR / DVD
Stop
Stop the operations
Rewind / Skip / Search
VCR: Rewind, review (during playback)
DVD: Skip to the previous track or title
Press and hold to search backward
Fast-forward / Skip / Search
VCR: Fast-forward, cue (during playback)
DVD: Skip to the next track or title
Press and hold to search forward
Pause
Pause / Restart
DVD: Press and hold for slow-motion play
Programme Up / Down
Select programme
Record
Start recording
Watching Videos and DVDs
Watching TV
TV/AV
yellow
••
■
■ Other Useful Functions (Operate after
AV1
green
yellow
Viewing
Prog.
VCR
1
2
3
4
5
6
7
8
9
10
11
12
green
red
watch
11
Viewing Teletext
You can enjoy teletext broadcasting, including news, weather forecasts and subtitles, if this service is
provided by the broadcasters.
What is TOP / FLOF mode?
In TOP / FLOF mode, four differently coloured subjects are situated at the bottom of the screen. To access more
information about one of these subjects, press the appropriately coloured button. This facility enables fast access to
information on the subjects shown.
What is List mode?
In List mode, four differently coloured page numbers are situated at the bottom of the screen. Each of these
numbers can be altered and stored in the TV’s memory. ("Store Frequently viewed pages", p. 13)
■ To change mode
"Teletext" in Setup menu (p. 14)
1
Sub page number
Switch to Teletext
•
TEXT
OK
<< 01 02 03 04 05 06 07
Current
page
number
Displays Index
(content varies
depending on the
broadcasters)
>>
17:51 28 Feb
Time / date
TELETEXT
INFORMATION
2
3
4
5
6
8
9
Stop or resume automatic updating
■ To resume
HOLD
HOLD
Return to the main index page
•
••
INDEX
Call up a
favourite
pages
INDEX HOLD
1
7
INDEX
View in
multi
window
Colour bar
F.P.
HOLD
F.P.
TOP / FLOF mode only
Call up the page stored in "blue".
Factory setting is "P103".
Watch TV and Teletext in two windows at once
MENU
TEXT
If you wish to hold the current page without updating
MENU
•
(Press twice)
Select Picture and text
On or Off
•
Store frequently viewed pages
Operations can be made only in Teletext screen.
2
Select the page
1
2
3
4
5
6
7
8
9
or
down
0
0
(only on first 25 channels on Programme Guide)
in the colour bar
up
or
VCR
red
green yellow blue
(Corresponds to the colour bar)
VCR
■ To adjust contrast
As the blue bar is displayed
Store
frequently
viewed
pages
As page is
displayed
hold
down
OK
Corresponding
colour button
■ To change stored pages
Viewing
MENU
(List mode only)
The number changes to white.
Enter new page number
Colour button you
want to change
1
2
3
4
5
6
7
8
9
OK
hold
down
•
0
VCR
■ To return to TV
Appears at upper-left
corner of the screen
TEXT
View sub
page
■ Using teletext conveniently
Reveal
hidden
data
Viewing Teletext
View sub page (Only when teletext is more than one page)
TV
red
•
Re-hide
Enter the
4-digit number
MENU
blue
•
Reveal hidden words e.g. quiz page answers
MENU
■ To view specific sub page
red
example: P6
6
0
0
0
Sub pages:
The number of sub pages varies depending on the broadcasters (up to 79 pages).
It may take some time for searching, during which time you can watch TV.
View theTV picture while searching for a teletext page
(TOP)
FULL /
TOP /
BOTTOM
(BOTTOM)
MENU
green
(Expand the BOTTOM half)
12
Normal (FULL)
Watch
TV while
waiting
for update
Teletext automatically updates itself when new information becomes available.
Changes to TV screen temporarily
P108
MENU
yellow
•
Appears
when
updating is
completed
yellow
View the
updated
page
(You cannot change the channel.)
The news page provides a function that indicates arrival of latest news ("News Flash").
13
How to Use Menu Functions
Various menus allow you to make settings for the picture, sound,
and other functions so that you can enjoy watching TV in your own way.
Display menu
•
Displays the functions that
can be set (varies according
to the input signal)
EXIT
2
Select the menu
select
M a i n m e nu
P i c tur e m e nu
next
Sound menu
S e t up m e nu
(example: Picture menu)
Dynamic
Normal
On
Auto
Off
On
(example: Picture menu)
TV
4
Adjust or select
Viewing mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour balance
Colour management
P-NR
MPEG NR
3D-COMB
OK
Normal
On
Auto
Off
On
3D-COMB
Bass
Treble
Balance
Headphone volume
MPX
Mode
Ambience
change
Q-Link
store
(Required
by some
functions)
AV2/AV3 out
Control with HDMI
Teletext
Off timer
Normal
Changed
■ Adjust using the slide bar
Sharpness
■ Go to the next screen
Tuning menu
Access
Displays the next
screen
■ To reset the setting
N
Side panel
Power save
Programme edit
Auto setup
Manual tuning
Fine tuning
Colour system
Volume correc.
Decoder (AV2 / AV3)
OSD language
Colour system
Volume correction
Tuning menu
■ To return to the
Moved
Setup menu
■ To return to TV
Text language
Viewing mode
Adjusts colour, brightness, etc. for each picture mode to suit your taste
Contrast
Brightness
Colour
Sharpness
•
Adjusts tint of image
For NTSC signal reception only
Chooses the colour balance of the entire image (Cool / Normal / Warm)
Tint
Colour balance
Normal
Colour management
On
P-NR
Auto
MPEG NR
Off
3D-COMB
On
Automatically adjusts colours to vivid ones (Off / On)
Automatically reduces unwanted picture noise (Off / Normal / Dynamic / Auto)
Not valid on HDMI, PC, and Analogue component signal
Automatically reduces noise for watching DTV, DVD and VCD (Off / Min / Mid / Max)
Automatically makes still pictures and slow pictures look more vivid (Off / On)
For PAL or NTSC signal reception only
Not valid on RGB, S-Video, components, PC and HDMI
Adjusts the output level of deep bass
•
••
Bass
Adjusts the output level of high-pitch, shrill sound
Treble
Adjusts volume level of right and left speakers
Balance
Adjusts the volume of the headphones
Select stereo / monaural (Mono / Stereo)
Normally: Stereo
Stereo signal cannot be received: Mono
M1 / M2: Available while mono signal is transmitted
Improves sound quality for music and dramas (Music / Speech)
Headphone volume
Gives a greater spatial effect by using dynamic enhancer (Off / On)
Chooses according to the signal when HDMI is connected
(Auto / Digital / Analogue) (p. 27)
HDMI2 terminal is for digital signal only
Chooses the connector to which a Q-Link compatible equipment is connected
(Off / AV2 / AV3) (p. 24)
Chooses the signal to be transmitted from the TV to Q-Link (TV / AV1 / AV2 / AV3 / AV4 / Monitor)
Monitor: Image displayed on screen
Component signals cannot be outputted
Control with HDMI function (Off / On) (p. 21)
••
•
Dynamic
MPX
Stereo
Mode
Music
Ambience
Off
HDMI1 input
Auto
Q-Link
AV2
AV2 out
TV
Control with HDMI
On
Teletext display mode (TOP (FLOF) / List) (p. 12)
Teletext
TOP
Sets the time the unit automatically turns Off. (Off / 15 / 30 / 45 / 60 / 75 / 90) (minutes)
Selects teletext language (West / East1 / East2)
West: English, French, German, Greek, Italian, Spanish, Swedish, Turkish
East1: Czech, English, Estonian, Lettish, Rumanian, Russian, Ukrainian
East2: Czech, Hungarian, Lettish, Polish, Rumanian
Increases the brightness of the side panel (Off / Low / Mid / High)
The recommended setting is High to prevent panel "after-image"
Reduces brightness of picture to economise on power consumption (Off / On)
Off timer
Off
Text language
West
Side panel
Off
Power save
Off
Edits channels (p. 16)
Programme edit
Access
Sets channels automatically (p. 18)
Auto setup
Access
Sets channels manually (p. 18)
Manual tuning
Access
Fine tuning of channels (during rain, etc.)
Fine tuning
Selects optional colour system depending on video signals (Auto / PAL / SECAM / M.NTSC)
Colour system
Adjusts volume of individual stations
Volume correc.
Set “On” when the decoder is connected to AV2 or AV3 terminal via a Q-Link equipment (Off / On)
Decoder (AV2)
Off
Changes language for on-screen displays
OSD language
Access
Selects optional colour system based on video signals in AV mode
Colour system
Auto
Adjusts volume for AV, PC, and HDMI mode
Volume correction
•
••
••
•
•
••
Advanced
Colour balance
14
MPEG NR
Dynamic
Number and positions
of alternatives
MENU
P-NR
HDMI1 input
■ Choose from among alternatives
previous screen
Colour balance
Colour management
Picture menu
(example: Picture menu)
EXIT
Tint
•
How to Use Menu Functions
(picture, sound quality, etc.)
Viewing mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour balance
Colour management
P-NR
MPEG NR
3D-COMB
Contrast,
Brightness, Colour,
Sharpness
Adjustments / Configurations (alternatives)
Basic picture mode (Dynamic / Normal / Cinema / Auto)
Set for each input signal
•
N
select
Picture menu
Sound menu
3
Select the item
Adjust by each viewing mode
MENU
Item
Viewing mode
OK
MENU
Menu
Picture menu
1
■ Menu list
Auto
A different menu will be displayed while PC is used. (p. 19)
In AV mode, the Sound menu and Setup menu give a smaller number of options.
15
Editing and Setting Channels
The current channel settings can be changed according to your needs and reception conditions.
1
Display the menu
Name
Select the programme number to edit
MENU
Programme edit
Prog.
1
2
3
4
5
:
:
:
:
:
Chan.
Name
Lock
Sys
CH44
CH51
CH41
CH47
CH37
ABC
XYZ
FTP
123
456
Off
Off
Off
Off
Off
SC1
SC1
SC1
SC1
SC1
select
Programme
number
3 FTP
Cursor
OK
MENU
EXIT
2
Edit
Select "Setup menu"
Main menu
Picture menu
Sound menu
■ To delete
■ To add
■ To move
next
select
S e t u p me n u
■ To exit
EXIT
Q-Link
AV2 out
Control with HDMI
Teletext
Off timer
Text language
Side panel
Power save
Tuning menu
OSD language
AV2
TV
On
TOP
Off
West
Off
Off
Access
next
select
Select the function
Tuning menu
Programme edit
Auto setup
Manual tuning
Fine tuning
Colour system
Volume correc.
Decoder (AV2)
Set
Access
next
Auto
select
Off
Programme
edit
■ Delete
■ Add
■ Move
■ Change
■
■
■
■
channel
number
Change
name
Lock
Change
sound
system
Download to
equipment
green
Select destination
yellow
yellow
■ To change channel number
Programme edit
Prog.
1
2
3
4
5
:
:
:
:
:
Chan.
Name
Lock
Sys
Select the "Chan." field
CH44
CH51
CH41
CH47
CH37
ABC
XYZ
FTP
123
456
Off
Off
Off
Off
Off
SC1
SC1
SC1
SC1
SC1
Change number
(Can also be changed with "C" and number buttons)
■ To change the name of the broadcaster displayed when selecting channels
Programme edit
Prog.
1
2
3
4
5
:
:
:
:
:
Chan.
Name
Lock
Sys
CH44
CH51
CH41
CH47
CH37
XYZ
FTP
123
456
Off
Off
Off
Off
Off
SC1
SC1
SC1
SC1
SC1
ABCDEFGHIJKLMNOPQRST
UVWXYZ+-. 0123456789
Select the "Name" field
Select the character
To next character
Repeat
Usable characters
■ To lock
Programme edit
Prog.
1
2
3
4
5
•
:
:
:
:
:
Chan.
Name
Lock
Sys
CH44
CH51
CH41
CH47
CH37
ABC
XYZ
FTP
123
456
Off
Off
Off
Off
Off
SC1
SC1
SC1
SC1
SC1
Select the "Lock" field
Select "On"
("Off" to unlock)
You cannot select the channel with number buttons or the "C" button when locked.
■ To change sound system based on signals
Programme edit
Prog.
1
2
3
4
5
:
:
:
:
:
Chan.
Name
Lock
Sys
CH44
CH51
CH41
CH47
CH37
ABC
XYZ
FTP
123
456
Off
Off
Off
Off
Off
SC1
SC1
SC1
SC1
SC1
Select the "Sys" field
Select sound system
SC1 : PAL B, G, H / SECAM B, G
SC2 : PAL I
SC3 : PAL D, K / SECAM D, K
F:
SECAM L / L’
Advanced
5
Setup menu
After confirming, press
red
Editing and Setting Channels
TV
4
Select "Tuning menu"
green
After confirming, press
•
3
Edit
channels
red
■ To download channel information to a Q-Link compatible equipment connected to the unit
••
blue
Automatically transmitted (for a few sec.)
For details (p. 20)
Not available if "Q-Link" is "Off" in the Setup menu. (p. 14)
Store
OK
16
17
Editing and Setting Channels
The screen of the PC connected to the unit can be displayed on the TV.
You can also listen to PC sound with the audio cable connected. To connect PC (p. 24)
Automatically set the channels received in the area
Start Auto setup
1
Select your country
set
OK
WARNING
All current tuning
data will be erased
Set
automatically
Displaying PC Screen on TV
Start Auto Setup
Exit
Return
Country
Deutschland
Österreich
France
Italia
España
Portugal
Nederland
Danmark
Sverige
Norge
Suomi
Belgium
Schweiz
ELLADA
Polska
Česká republika
Magyarország
E.Eu
select
•
••
start
TV/AV
2
Settings are made automatically
The settings are downloaded to a Q-Link
compatible equipment connected to the unit.
All previous settings are erased.
When the sequence is completed,
the broadcast of programme number
"1" will appear.
CH12
AUTO SETUP IN PROGRESS
SEARCHING :
PLEASE WAIT
02
TV/AV
OK
OK
Auto setup
Select the external input
78:01
Select "PC"
blue
yellow
•
•
(To next page)
Press twice
41
Exit
Return
Displays PC screen
■ PC menu setting (changed as desired)
•
To freely change settings after Auto setup
Programme
number
Store
OK
Manual tuning
C
0
78:01
•
41
Search down/up
Store
Exit
Return
9 Direct entry
The programme
number blinks.
Note
If a VCR is
connected with
only the RF
cable, select
programme
number "0".
Item
(Programme, Channel (select), Sound system)
(Change programme or start searching channels)
-
(Repeat)
■ To return to TV
Programme number (flash)
Channel number (flash)
Sound system (flash)
Adjustments / Configurations(options)
W/B High R
White balance of bright red area
W/B High B
White balance of bright blue area
Advanced W/B Low R
setting
and
repeatedly adjusted
White balance of dark red area
W/B Low B
White balance of dark blue area
Gamma
(2.0 / 2.2 / 2.5 / S Curve)
Input
resolution
Switches to a wide view
VGA (640 x 480 dots), WVGA (852 x 480 dots),
XGA (1,024 x 768 dots), WXGA (1,366 x 768 dots)
Options change depending on signals
Clock
Set to the minimum level if noise occurs
•
•
Advanced
(Access "Manual tuning")
(Store)
(p. 14)
Adjust horizontal position
(Press repeatedly until "Tuning mode" appears)
or
to
Viewing mode, Contrast, Brightness, Sharpness, Colour balance (p. 14)
("Tuning mode" on p. 7)
or
H-pos
PC
setup
Adjust vertical position
V-pos
Clock phase
Eliminate flicker and distortion
Adjust after Clock adjustment
Sync
Chooses another synchronous signal if the image is distorted (H&V / On G)
H&V : by the horizontal and vertical signals from your PC
On G : by the green signal from your PC (if available)
1
CH12
SC1
Manual tuning
-, +
TV / AV
STR
F
:
:
:
:
Search
Move cursor
To store
To exit
02
STR
Channel
18
"How to Use Menu Functions"
For Manual tuning, using the buttons on the unit
Setup menu
Manual
tuning
•
search
1
02
Menu
Channel
CH12
Set
manually
Repeat
and
Picture menu
Select the programme number
and search through the channel
Making settings
78:01
F
-/
+/
Displaying PC Screen on TV
Editing and Setting Channels
••
■ To return to TV
TV/AV
Corresponding signals
(p. 28)
If "H-freq." or "V-freq."
is shown in red, the
signals may not be
supported.
•
•
Set to the minimum level if noise occurs
•
41
TV / AV
•
Volume correction, Side panel, Power save, OSD language (p. 14)
Sound menu (p. 14)
19
External Equipment
Q-Link
Q-Link interlocks the TV unit and VCR / DVD recorder, enables easy recording and playback.
■ Condition
•
••
■
•
•
■
Use the VCR / DVD recorder with the following logos:
"Q-Link", "NEXTVIEWLINK", "DATA LOGIC", "Easy Link", "Megalogic", or "SMARTLINK"
Connect the equipment to this unit’s AV2 or AV3 terminal via a "fully-wired" SCART cable. (p. 22)
Q-Link terminal setup in Setup menu (Q-Link, AV2/AV3 out). (p. 14)
Download channel settings
Perform Auto setup. (p. 18)
When first using this unit, see "Auto Setup". (p. 9)
Perform download to the equipment. (p. 16)
Features available
Some recording equipments are not applicable. Read the manuals of the equipment.
∗Enjoy additional HDMI Inter-Operability with Panasonic products which have "HDAVI Control" function.
HDMI connections to some Panasonic equipments (Panasonic DVD Recorder DIGA, Panasonic Player
theatre, Panasonic Amplifier, etc.) allow you to enjoy the easy playback or home theatre.
About connections, see "Connections" (p. 23). Read the manuals of the equipment too.
Non-HDMI-compliant cables cannot be utilized.
About applicable equipments, consult your local Panasonic dealer.
Preparations
(For the first time / When adding new equipment, reconnecting equipment or changing setup)
After connection turn the equipment on and then switch the TV unit on.
Select the input mode to HDMI1 or HDMI2 (p. 11), and make sure that an
image is displayed correctly.
Display the menu
1
Direct TV Recording:
Recording the current programme in VCR / DVD recorder immediately.
DIRECT TV REC
select
S o u n d m en u
S et u p m en u
3
4
Recording information or if recording is not possible, a message is displayed.
(Only when the programme number is "0" or "AV mode" for some equipment.)
Easy
playback
Setup menu
AV2
TV
On
TOP
Off
West
Off
Off
Q-Link
AV2 out
Control with HDMI
Teletext
Off timer
Text language
Side panel
Power save
Tuning menu
OSD language
select
select
Select "On" (default is On)
Automatic Input switching-When the connected Panasonic equipment is operated, input
mode is switched automatically. When it is stopped operating, input mode is returned.
MENU
Display the menu
Select "Home theatre" or "TV speaker"
Main menu
Home theatre
Picture menu
Sound menu
When TV is set to Standby mode, the recording equipment is also automatically
set to Standby. (Only when the videocassette or DVD is not active.)
Read the manuals of the equipment too.
Select "Control with HDMI"
You can control the theatre speaker with TV’s remote control.
This function is available when Panasonic Amplifier or Player theatre is connected.
Insert a videocassette or DVD in the recording equipment and it is operated, TV
is turned on and input mode is switched automatically so that you can view the
content. (Only when TV is in Standby mode.)
• "DATA LOGIC" (a trademark of Metz Corporation) • "Megalogic" (a trademark of Grundig Corporation)
• "Easy Link" (a trademark of Philips Corporation) • "SMARTLINK" (a trademark of Sony Corporation)
20
next
P i ct u r e m en u
Theatre
speaker
Power off
link
M ai n m en u
Ho m e t h eat r e
Setup menu
Power on
link
Power off
link
••
Advanced
Power
on link
and Easy
playback
2
Select "Setup menu"
External Equipment
Information
/ Message
OK
MENU
MENU
•
What you
see is
What you
record
DIRECT TV REC
•
•
•
When Direct TV Recording is performed, the
recording equipment is automatically turned on if it
is in Standby mode.
The recording equipment is recording from its own
tuner. You can turn the TV off during recording.
Do not turn the TV off during recording AV source.
Otherwise the recording will be stopped.
ControlTM"∗
Control with HDMI "
■ Home theatre:
Adjustment for equipment (automatically
turned on if it is in Standby mode)
next
Volume up / down
select
Mute
■ TV speaker:
TV speakers are active.
When selecting "Home theatre", the sound of TV speakers is mute.
When the equipment is turned off, TV speakers will be active.
When the connected Panasonic equipment is operated, TV is also automatically
turned on and the content is reproduced. (Only when TV is in Standby mode.)
When TV is set to Standby mode, the connected Panasonic equipment is also
automatically set to Standby.
21
External Equipment
•
Connections
External equipments and cables shown are not supplied with this TV.
■ Connect VCR / DVD recorder (Recording, Playback)
■ Connect VCR / DVD recorder and Set top box (example)
VCR / DVD recorder
Rear of the TV
Rear of the TV
1
AV
1
For Q-Link connection (p. 20)
AV
SCART
2
AV 1
AV 2
SCART
AV 3
2
AV 1
AV 2
VCR / DVD recorder
AV 3
COMPONENT
Y
AUDIO
IN
COMPONENT
L
PB
L
R
PR
R
Y
AUDIO
IN
L
R
AUDIO
PC
RGB
VIDEO
VIDEO
S-VIDEO
RGB
VIDEO
S-VIDEO
PB
L
PR
R
VIDEO
AUDIO
SCART
AUDIO
PC
RGB
VIDEO
VIDEO
S-VIDEO
RGB
VIDEO
S-VIDEO
VIDEO
SCART
AUDIO
Set top box
or
SCART
HDMI
■ Connect DVD player (Playback)
■ Connect DVD recorder and VCR (example)
DVD recorder
Rear of the TV
Rear of the TV
1
AV
1
HDMI
2
SCART
SCART
2
AV
AV 1
AV 2
AV 3
COMPONENT
AV 1
AV 2
AV 3
Y
AUDIO
IN
Y
AUDIO
IN
PB
L
R
PR
R
AUDIO
PC
RGB
VIDEO
VIDEO
S-VIDEO
RGB
VIDEO
S-VIDEO
VIDEO
PB
L
R
PR
R
AUDIO
SCART
PC
RGB
VIDEO
VIDEO
S-VIDEO
RGB
VIDEO
S-VIDEO
VIDEO
VCR
AUDIO
SCART
AUDIO
or
DVD player
L
Control with HDMI (p. 21)
R
PR
■ Easy playback (For connection to HDMI2 terminal, refer to p. 24)
PB
Y
Front of the TV
Rear of the TV
or
Panasonic DVD recorder
DIGA
1
AV4
AV
R
S-V
V
L
2
AV 1
L
R
AV 2
AV 3
HDMI
COMPONENT
V
Y
AUDIO
IN
PB
L
S-V
PR
R
AUDIO
PC
■ Connect Set top box (RGB input)
RGB
VIDEO
VIDEO
S-VIDEO
RGB
VIDEO
S-VIDEO
VIDEO
L
R
AUDIO
■ Home theatre
This TV
Rear of the TV
1
Panasonic
Amplifier
This TV
Speaker system
HDMI
2
AV 1
AV 2
Panasonic
Player theatre
Speaker system
Advanced
Connect the S-VIDEO or VIDEO terminal.
AV
External Equipment
L
L
•
or
COMPONENT
AV 3
or
COMPONENT
Y
AUDIO
IN
PB
L
PR
R
AUDIO
PC
RGB
VIDEO
VIDEO
S-VIDEO
RGB
VIDEO
S-VIDEO
VIDEO
L
R
SCART
Front of the TV
Panasonic DVD recorder
DIGA
or
AV4
R
S-V
V
L
L
R
V
S-V
Connect the S-VIDEO or VIDEO terminal.
22
Set top box
AUDIO
Read the manuals of Panasonic Amplifier or Player theatre for details.
•
It is recommended that you use Panasonic’s HDMI cable.
Recommended part number:
RP-CDHG15 (1.5 m)
RP-CDHG30 (3.0 m)
RP-CDHG50 (5.0 m)
23
External Equipment
Connections (overview)
These diagrams show our recommendations for how to connect the TV unit to your various equipment.
For other connections, consult the instructions of each equipment, the table below, and the specifications
(p. 31).
To watch satellite broadcasts
Set top box
Control with HDMI (p. 21)
DIGA or Panasonic Amplifier
•
To record / playback
DVD Recorder / VCR
When using HDMI2 terminal as Control
with HDMI, select the external input to
HDMI2 for the first time (p. 11).
RF cable
or
SCART
cable
SCART
cable
AV4
S-V
V
SCART
cable
L
R
1
To listen with speakers
Amplifier with speaker system
(M3
plug)
AV
2
(AUDIO)
AV 1
AV 2
AV 3
(Q-Link)
(Q-Link)
Y
AUDIO
IN
Camcorder / Game equipment
PC
(Viewing)
PB
L
R
PR
R
AUDIO
Computer
PC
Pull back the
tabs to open
L
RGB
VIDEO
VIDEO
S-VIDEO
RGB
VIDEO
S-VIDEO
VIDEO
AUDIO
External Equipment
COMPONENT
(VIDEO)
or
(S-VIDEO)
Ferrite
core
•
within
10 cm
Press the
cable through
and close
Advanced
Headphones
To watch DVDs
Conversion adapter (if necessary)
(Listening)
DVD player
Types of connectable equipment to each connector
Y
Connector
Recording / Playback (equipment)
24
To record / playback videocassettes / DVDs
(VCR / DVD recorder)
To watch DVDs (DVD player)
To watch camcorder images (Video camera)
To watch satellite broadcasts (Set top box)
To play games (Game equipment)
Q-Link
Control with HDMI
: Recommended Connection
AV1
AV2
AV3
AV4
PB
PR
COMPONENT
1
2
25
Technical Information
Aspect Ratio
HDMI connection
The optimum size and aspect can be chosen, and you can enjoy finer images. (p. 10)
■Auto aspect: Auto aspect determines the best aspect ratio to use to fill your screen. It does this using a four step
process to determine if the picture being viewed is a widescreen picture.
If Auto aspect detects a widescreen signal it switches into the appropriate 16:9 or 14:9 widescreen mode. If Auto
aspect does not detect a widescreen signal then this advanced TV set enhances the picture for optimum viewing
pleasure.
The text shown on the screen indicates how Auto aspect determined which ratio to use:
"WIDE" appears in the top left of the screen if a widescreen identification signal (WSS) is found or a signal found
through a SCART terminal. Auto aspect switches to the appropriate 16:9 or 14:9 widescreen ratio. This function
will also work in any aspect mode. "Auto aspect" appears in the top left of the screen if black stripes above and
below the picture are detected. Auto aspect chooses the best ratio and expands the picture to fill the screen. This
process can take several minutes, depending on the darkness of the picture.
Aspect Control Signal
Control signal through
Widescreen signal (WSS)
SCART terminal (pin 8)
Aspect modes
Signal name
TV/AV1/AV2/ Component/HDMI
AV3/AV4
PAL
PAL 525/60
M.NTSC
NTSC
(AV input only)
525(480)/60i
525(480)/60p
625(576)/50i
625(576)/50p
750(720)/50p
750(720)/60p
1125(1080)/50i
1125(1080)/60i
PC input
O
O
O
O
O
O
O
O
O
-
4:3 Zoom1 Zoom2 Zoom3 TV AV1 AV2
16:9 14:9 Just 4:3 Full
O O O O O
O
O
O O O
- - O O O O O
O
O
- - O O O O O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
-
O
O
O
O
O
O
O
O
O
-
O
-
O
O
O
O
O
O
O
O
O
O
O
O
O
-
O
O
O
O
O
O
O
O
O
-
O
O
O
O
O
O
O
O
O
-
AV3 AV4 Component AV1
AV2
AV3
O
O
-
-
O
O
O
O
O
O
O
O
O
-
O
-
-
-
-
-
-
O
O
O
O
O
O
O
O
O
O
O
-
-
-
-
-
-
-
-
-
-
O
O
-
Note
16:9
14:9
Directly displays the image at "16:9"
without distortion (anamorphic).
16 : 9
Displays the image at the standard "14:9"
without enlargement.
14 : 9
••
••
••
•
•
(∗1): The HDMI logo is displayed on an HDMI-compliant equipment.
Note
HDMI2 terminal is for digital signal only.
Use with a PC is not assumed.
The 720p/1080i signals will be reformatted before being displayed on the screen.
If the connected equipment has an aspect adjustment function, set the aspect ratio to "16:9".
These HDMI connectors are "type A".
An equipment having no digital output terminal may be connected to the input terminal of either "Component", "SVIDEO", or "Video" to receive analogue signals.
The HDMI input terminal can be used with only the following image signals:
480i, 480p, 576i, 576p, 720p and 1080i. Match the output setting of the digital equipment.
For details of the applicable HDMI signals, see p. 28.
PC connection
A PC may be connected to this TV unit so that the PC screen is displayed and sound is heard from the TV.
PC signals that can be inputted: Horizontal scanning frequency 31 to 69 kHz; vertical scanning frequency
59 to 86 Hz (more than 1,024 signal lines could result in incorrect display of the image).
A PC adapter is not necessary for the DOS/V-compliant D-sub 15-pin connector.
•
•
••
•
Note
Some PC models cannot be connected to this TV unit.
For details of the applicable PC signals, see p. 28.
Max. display resolution
4:3
16:9
Aspect
•
1,024 × 768 dots
1,366 × 768 dots
D-sub 15-pin connector signal
5
4
3
2
1
10 9 8 7 6
15 14 13 12 11
Just
4:3
Displays a 4:3 image full-screen.
Stretching is only noticeable at the left
and right edges.
Just
4:3 Full
Zoom1
Zoom2
Zoom2
26
Displays a "16:9" letterbox or "4:3" image
without distortion.
Zoom1
Zoom3
Displays a "16:9" letterbox (anamorphic)
image full-screen without distortion.
Zoom3
Displays a "2.35:1" letterbox (anamorphic)
image full-screen without distortion. At
"16:9", displays the image at its maximum
(with slight enlargement).
Pin No.
Signal Name
R
G
B
NC (not connected)
GND (Ground)
Pin No.
Signal Name
GND (Ground)
GND (Ground)
GND (Ground)
NC (not connected)
GND (Ground)
Pin No.
Signal Name
NC (not connected)
NC (not connected)
HD/SYNC
VD
NC (not connected)
Control with HDMI
HDMI connections to some Panasonic equipments allow you to enjoy the easy playback or home theatre.
Setup the equipment to enable this function. Read the manual of the equipment.
This function may not work normally depending on the equipment condition.
This function may not work normally when Panasonic Player theatre is connected.
The equipment can be operated by TV’s remote control with this function on even if TV is in Standby mode.
Image or sound may not be available for the first few seconds when the playback starts.
Image or sound may not be available for the first few seconds when Input mode is switched.
Volume function will be displayed when adjusting the volume of the equipment.
Easy playback is also available by using the remote control for Amplifier. Read the manuals of Amplifier.
••
••
••
••
FAQs, etc.
Displays a "4:3" image enlarged
horizontally to fit the screen.
4 : 3 Full
Displays the image at the standard "4:3"
without distortion.
4:3
(∗2): Enquire at your local digital equipment retailer shop.
Technical Information
The ratio varies depending on the programme, etc. If the ratio is greater than the standard "16:9", black bands
may appear at the top and bottom of the screen.
If the screen size looks unusual when a widescreen-recorded programme is played back on a VCR, adjust the
tracking of the VCR. (See the VCR manual.)
To select the ratio manually: (Only "16:9" or "4:3" in PC mode)
••
••
•
•
•
•
•
Auto
aspect
O
O
O
HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound
by connecting the TV unit and the equipment.
HDMI-compatible equipment (∗1) with an HDMI or DVI output terminal, such as a set top box or a DVD player, can
be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.
HDMI is the world's first complete digital consumer AV interface complying with a non-compression standard.
If the external equipment has only a DVI output, connect to the HDMI1 terminal via a DVI to HDMI adapter cable (∗2).
When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal.
Audio settings can be made on the "HDMI1 input" menu screen. (p. 14)
Applicable audio signal sampling frequencies (2ch L.PCM): 48 kHz, 44.1 kHz, 32 kHz
27
Technical Information
Before requesting service or assistance, please follow these simple guides to resolve the problem.
If problem still persists, please contact your local Panasonic dealer or Panasonic Customer Care Centre
for assistance.
SCART and S-video terminal information
■ AV1 SCART terminal
■ AV2 SCART terminal
(RGB, VIDEO)
(VIDEO, S-VIDEO, Q-Link)
Suitable inputs for AV1 include RGB (Red / Green / Blue).
Socket Earth
CVBS out (video)
CVBS earth
Red in
Red earth
Green in
Green earth
Blue in
Blue earth
Audio out (L)
Audio out (R)
21
19
17
15
13
11
9
7
5
3
1
20
18
16
14
12
10
8
6
4
2
CVBS in (video)
RGB status earth
Status RGB
Earth
--Status CVBS
Audio in (L)
Audio earth
Audio in (R)
■ AV3 SCART terminal
(RGB, VIDEO, S-VIDEO, Q-Link)
AV3 - Pins 15 and 20 are dependent on AV3 S-VHS /
VIDEO switching.
Socket Earth
CVBS out (video)
CVBS earth
Red in, S.C. - in
Red earth
Green in
Green earth
Blue in
Blue earth
Audio out (L)
Audio out (R)
21
19
17
15
13
11
9
7
5
3
1
FAQs
20
18
16
14
12
10
8
6
4
2
CVBS in (video)
RGB status earth
Status RGB
Earth
-Q-Link data
Status CVBS
Audio in (L)
Audio earth
Audio in (R)
AV2 - Pins 15 and 20 are dependent on AV2 S-VHS /
VIDEO switching.
Socket Earth
CVBS out (video)
CVBS earth
S.C. - in
Earth
-Earth
-Earth
Audio out (L)
Audio out (R)
21
19
17
15
13
11
9
7
5
3
1
20
18
16
14
12
10
8
6
4
2
CVBS in (video)
Earth
-Earth
-Q-Link data
Status CVBS
Audio in (L)
Audio earth
Audio in (R)
White spots or
shadow images
(noise)
■ AV4 S-VIDEO 4 pin terminal
•
Luminance in
Chrominance in
Chrominance earth
Check the position, direction,
and connection of the aerial.
logo appears
at the four corners
of the screen
Luminance earth
Contrast is reduced
Signal name
Note
28
••
Vertical
frequency (Hz)
59.94
59.94
50.00
50.00
60.00
50.00
60.00
50.00
70.07
59.94
75.00
60.32
75.00
85.06
60.00
70.07
75.03
85.00
60.02
66.67
74.54
75.06
Component
HDMI
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
Signals other than above may not be displayed properly.
The above signals are reformatted for optimal viewing on your display.
PC
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
•
•
•
•
Only one part
remains dark
•
Is the HDMI cable connected properly?
(p. 24)
Turn Off the TV unit and equipment,
then turn them On again.
Check an input signal from the equipment.
(p. 28)
Use an equipment compliant with
EIA/CEA-861/861B.
A pixel or luminescent spot may
occasionally be missing in plasma
displays.
(Not a faulty symptom)
The remote control
does not work
TV
•
•
Are the batteries installed correctly?
(p. 6)
Has the TV unit been switched On?
FAQs, etc.
525 (480) / 60i
525 (480) / 60p
625 (576) / 50i
625 (576) / 50p
750 (720) / 60p
750 (720) / 50p
1,125 (1,080) / 60i
1,125 (1,080) / 50i
640 × 400 @70 Hz
640 × 480 @60 Hz
640 × 480 @75 Hz
800 × 600 @60 Hz
800 × 600 @75 Hz
800 × 600 @85 Hz
1,024 × 768 @60 Hz
1,024 × 768 @70 Hz
1,024 × 768 @75 Hz
1,024 × 768 @85 Hz
1,280 × 1,024 @60 Hz
Macintosh13” (640 × 480)
Macintosh16” (832 × 624)
Macintosh21” (1,152 × 870)
Horizontal
frequency (kHz)
15.73
31.47
15.63
31.25
45.00
37.50
33.75
28.13
31.46
31.47
37.50
37.88
46.88
53.67
48.36
56.48
60.02
68.68
63.98
35.00
49.72
68.68
Pictures from an
equipment are unusual
when the equipment is
connected via HDMI
Frequently Asked Questions
Technical Information
∗ Mark: Applicable input signal for Component (Y, PB, PR), HDMI and PC (D-sub 15P)
The function to prevent after-image
is activated.
(Not a faulty symptom)
● The screen saver is activated if
the TV unit is not operated for a
certain time in AV mode.
● Contrast is lowered when radio,
menu, etc. lasts for several
minutes.
● "after-image" (p. 5)
•
•
•
Input signal that can be displayed
29
FAQs
Licence
Problem
Screen
Chaotic image, noisy
•
•
Set "P-NR" in the Picture menu (to remove noise).
(p. 14)
Check nearby electrical products
(car, motorcycle, fluorescent lamp).
No image can be
displayed
•
Is "Colour" or "Contrast" in the Picture menu set to the
minimum? (p. 14)
Blurry or
distorted image
•
Neither image nor
sound is produced
No sound is produced
Sound
Sound level is low
or sound is distorted
"Control with HDMI"
function does not work
An error message
appears
••
••
TH-50PV60E
Power Source
Is the unit in "AV mode"?
Is the mains lead plugged into the socket outlet?
Is the TV unit turned On?
Check Picture menu (p. 14) and volume.
Is "Sound Mute" active? (p. 7)
Is the volume set to the minimum?
Sound signal reception may be deteriorated.
Set "MPX" (p. 14) in the Sound menu to "Mono".
The sound is from built-in cooling fan (not a sign of faulty
operation).
Set the sound setting of the connected equipment
to "2ch L.PCM".
Check the "HDMI1 input" setting in the Sound menu.
(p. 14)
If digital sound connection has a problem, select
analogue sound connection. (p. 27)
Contact the authorized Service Centre.
Switch the TV unit on again with the equipment on.
Set "Control with HDMI" to "Off", then set to "On" again.
(p. 21)
The sleep function is activated.
The TV unit enters "Standby mode" about 30 min.
after broadcasting ends.
Follow the message's instructions.
If the problem persists, contact the authorized
Service Centre.
AC 220-240 V, 50 / 60 Hz
Average use
368 W
Standby condition
0.3 W
Drive method
Aspect Ratio
Contrast Ratio
AC type
16:9
Max 10000:1
127 cmV
Visible screen size
1,106 mm (W) × 622 mm (H) × 1,269 mm (diagonal)
(No. of pixels)
1,049,088 (1,366 (W) × 768 (H)) [4,098 × 768 dots]
Speaker
12 cm × 6 cm × 2 pcs, 8 Ω
Audio Output
20 W (10 W + 10 W ), 10% THD
Headphones
M3 (3.5 mm) Jack × 1
VGA, SVGA, XGA
SXGA ······ (compressed)
PC signals
Horizontal scanning frequency 31 - 69 kHz
Vertical scanning frequency 59 - 86 Hz
PAL B, G, H, I, SECAM B, G, SECAM L / L’
VHF E2 - E12
VHF H1 - H2 (ITALY)
VHF A - H (ITALY)
UHF E21 - E69
CATV (S01 - S05)
CATV S1 - S10 (M1 - M10)
CATV S11 - S20 (U1 - U10)
CATV S21 - S41 (Hyperband)
Receiving Systems /
PAL
D,
K,
SECAM
D,
K
Band name
VHF R1 - R2
VHF R3 - R5
VHF R6 - R12
UHF E21 - E69
PAL 525/60
Playback of NTSC tape from some PAL Video recorders (VCR)
M.NTSC
Playback from M. NTSC Video recorders (VCR)
NTSC (AV input only) Playback from NTSC Video recorders (VCR)
Aerial - Rear
VHF / UHF
Temperature : 0 °C - 40 °C
Operating Conditions
Humidity
: 20 % - 80 % RH (non-condensing)
AV1 (Scart terminal) 21 Pin terminal (Audio/Video in, Audio/Video out, RGB in)
AV2 (Scart terminal) 21 Pin terminal (Audio/Video in, Audio/Video out, S-Video in, Q-Link)
AV3 (Scart terminal) 21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, S-Video in, Q-Link)
VIDEO
RCA PIN Type × 1
1.0 V[p-p] (75 Ω)
AV4
S-VIDEO
Mini DIN 4-pin
Y:1.0 V[p-p] (75 Ω) C:0.286 V[p-p] (75 Ω)
AUDIO L - R RCA PIN Type × 2
0.5 V[rms]
Y
1.0 V[p-p] (including synchronization)
COMPONENT PB, PR
±0.35 V[p-p]
HDMI1/2
TYPE A Connectors
Others
HIGH-DENSITY D-SUB 15PIN
R,G,B/0.7 V[p-p] (75 Ω)
PC
HD, VD/TTL Level 2.0 - 5.0 V[p-p] (high impedance)
AUDIO L - R RCA PIN Type × 2
0.5 V[rms]
Output AUDIO L - R RCA PIN Type × 2
0.5 V[rms] (high impedance)
Dimensions ( W × H × D ) 1,210 mm × 818 mm × 95 mm
Weight
40.0 k Net
••
Note
FAQs, etc.
Other
TV unit goes into
"Standby mode"
•
••
Reset channels. (p. 18)
Connection Terminals
HDMI
An error message
appears
•
•
•
Specifications
Licence / Specifications
Frequently Asked Questions
Sound is unusual
••
•
••
•
•
•
••
Whirling sound is
heard
••
••
••
Trademark Credits
VGA is a trademark of International Business Machines Corporation.
Macintosh is a registered trademark of Apple Computer, USA.
S-VGA is a registered trademark of the Video Electronics Standard Association.
Even if no special notation has been made of company or product trademarks, these trademarks have been fully
respected.
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
HDAVI ControlTM is a trademark of Matsushita Electric Industrial Co., Ltd.
Power
Plasma
Consumption Display panel Sound
(no sound or low volume)
30
Actions
Design and Specifications are subject to change without notice. Weight and Dimensions shown are approximate.
This equipment complies with the EMC standards listed below.
EN55013, EN61000-3-2, EN61000-3-3, EN55020, EN55022, EN55024.
31
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement