Panasonic | RXES27P | Operating instructions | Panasonic RXES27P Operating Instructions

Portable Stereo CD System
Operating Instructions
Model No.
RX-ES27
Before connecting, operating or adjusting this product, please read these
instructions completely. Please keep this manual for future reference.
PC
RQT6274-C (Cover-3)En3
RQT6274-C
1
12/13/01, 4:03 PM
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions
carefully.
Before use
The model number and serial number of this product can be
found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
future reference.
RX-ES27
MODEL NUMBER!
SERIAL NUMBER
User memo:
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
of Contents
DearTable
Customer
Before use
Supplied Accessories .............................................. 2
IMPORTANT SAFETY INSTRUCTIONS ................... 3
Use of Batteries ........................................................ 4
Power Sources ......................................................... 4
Memory Batteries ..................................................... 4
Location of Controls ................................................ 5
The Remote Control ................................................. 6
Setting the Clock ...................................................... 7
Using Headphones ................................................... 7
Listening
The Radio .................................................................. 8
Normal tuning .................................................................. 8
Using auto scan ............................................................... 8
Preset tuning ................................................................... 9
CDs .......................................................................... 10
Other modes of play ....................................................... 11
Cassettes ................................................................ 13
CAUTION!
DO NOT INSTALL, OR PLACE THIS UNIT, IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED
SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO
PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS
AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE
VENTILATION VENTS.
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
CAUTION:
TO PREVENT ELECTRIC SHOCK MATCH
WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR PRODUCT DAMAGE, DO NOT
EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT
NO OBJECTS FILLED WITH LIQUIDS, SUCH
AS VASES, SHALL BE PLACED ON THE APPARATUS.
Recording
Tips on Recording .................................................. 13
Recording CDs ....................................................... 14
Normal recording ........................................................... 14
ALL-REC ........................................................................ 15
1-REC ............................................................................ 16
Recording the Radio .............................................. 16
Sound Quality and Sound Field
Sound Quality ......................................................... 17
3-D sound with the Sound Virtualizer .................. 17
Timer
The Play and Record Timer ................................... 18
The Sleep Timer ..................................................... 19
The Timer Fader ..................................................... 19
Reference
Maintenance ........................................................... 19
Troubleshooting ..................................................... 20
Product Service ...................................................... 21
Specifications ......................................................... 21
Warranty .................................................................. 22
Supplied Accessories
Please check and identify the supplied accessories.
Use numbers indicated in parentheses when
asking for replacement parts.
AC power supply cord (polarized) ........................................ 1pc.
(RJA0065-A)
Note
The included AC power supply cord is for use with this unit only.
Do not use it with other equipment.
Remote control transmitter (EUR648251) ............................ 1pc.
2
RQT6274
RQT6274-C (Cover-3)En3
2
12/13/01, 4:03 PM
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the safety precautions listed below.
Keep these operating instructions handy for future reference.
Safety
Maintenance
6. Attachments and accessories— Use only the attachments and
accessories recommended in these operating instructions.
Installation
Placement
1. Ventilation—Situate the unit so that it receives proper ventilation.
Do not install in a confined space such as a bookcase or cabinet.
Allow at least 10 cm (4 inches) clearance from the rear of the
unit. To prevent the risk of electric shock or fire due to overheating
ensure curtains and other materials do not obstruct the unit’s
ventilation.
2. Foreign material—Ensure objects and liquids do not get into
the unit. Avoid exposing the unit to excessive smoke, dust,
mechanical vibration, and shock.
3. Magnetism — Situate the unit away from equipment and devices
that generate strong magnetic fields.
4. Stacking —Do not place heavy objects on top of this unit.
5. Surface —Place the unit on a flat, level surface.
6. Carts and stands— Use the unit only with carts
and stands recommended by the manufacturer.
Move carts with care. Sudden stops, excessive
force, and uneven surfaces can cause carts to
overturn.
7. Wall and ceiling mounting— Do not mount the unit on walls or
ceilings unless specified in the instructions.
Environment
1. Water and moisture — Do not use the unit near water, such as
near a bathtub or swimming pool. Avoid damp basements.
2. Heat—Situate the unit away from heat sources, such as radiators.
Do not situate where temperatures fall below 5˚C (41˚F) or rise
above 35˚C (95˚F).
(See page 19 for details.)
Unplug the unit from the household AC outlet before cleaning.
Clean with a damp cloth.
Do not use abrasive pads, scouring powders, or solvents.
Service
1. Damage requiring service— The unit should be serviced by
qualified service personnel if:
(a) The AC power supply cord or the plug has been damaged;
or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked
change in performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing — Do not attempt to service the unit beyond that
described in these operating instructions. Refer all other servicing
to authorized servicing personnel.
3. Replacement parts — When parts need replacing ensure the
servicer uses parts specified by the manufacturer or parts that
have the same characteristics as the original parts. Unauthorized
substitutes may result in fire, electric shock, or other hazards.
4. Safety check — After repairs or service, ask the servicer to
perform safety checks to confirm that the unit is in proper working
condition.
Before use
1. Power source —Connect the unit to a power source of the type
described in these instructions or as marked on the unit.
2. Polarization — The unit is equipped with a polarized power plug
where one blade is wider than the other. This safety feature
ensures that the plug fits into your household AC outlet only one
way. If the plug doesn’t fit one way, try reversing it. If the plug
still doesn’t fit, contact an electrician to replace the obsolete
outlet. Do not attempt to defeat the safety purpose of the plug.
3. Power cord protection — Route the AC power supply cord so
that it will not be walked on or pinched by items placed on or
against it. Never take hold of the plug or cord with wet hands.
Always grasp the plug body firmly when connecting and
disconnecting it.
4. Overloading — When connecting the AC power supply cord, be
careful not to overload the household AC outlet, extension cord,
or outlet from any other device as this can result in fire or electric
shock.
5. Nonuse periods — Turn the unit off when it is not in use. Unplug
the unit from the household AC outlet if it is not to be used for a
long time. Unplug the unit during lightning storms.
Listening caution
EST. 1924
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to
consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out
of your equipment by playing it at a safe level. One that lets the
sound come through loud and clear without annoying blaring or distortion — and, most importantly, without affecting your sensitive
hearing.
We recommend you to avoid prolonged exposure to excessive
noise.
Sound can be deceiving. Over time your hearing “comfort level”
adapts to higher volumes of sound. So what sounds “normal” can
actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level
BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and
clearly, and without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage
or loss in the future. After all, we want you listening for a lifetime.
3
RQT6274
RQT6274-C (Cover-3)En3
3
12/13/01, 4:03 PM
Use of Batteries
A
7
• If this unit is not used for a long period of time or is used
only from an AC power source, remove all the batteries to
prevent potential damage due to possible battery leakage.
• Align the poles (+ and –) properly when inserting the batteries.
• Do not mix old and new batteries or different types of batteries.
• Do not recharge ordinary dry cell batteries.
• Do not heat or disassemble the batteries. Do not allow them to
contact flame or water.
• Do not keep batteries together with metallic objects such as
necklaces.
• Do not use rechargeable type batteries.
• Do not use batteries if the covering has been peeled off.
Before use
Household AC outlet
(AC 120 V, 60 Hz)
AC IN
AC power supply cord (included)
B
7
Mishandling of batteries can damage other items, cause damage to
the unit, and may cause a fire through short-circuiting or electrolyte
leakage.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
Power Sources
(R20/LR20, D, UM-1)
1
2
7
8
4
3
6
5
A
Inner row
Connect the AC power supply cord.
Conserving power
Outer row
C
7
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Operating the unit on AC power
○
○
○
○
○
○
○
○
○
○
○
○
○
○
The unit consumes 3.1 W even when it is turned off with
[ POWER /I ]. To save power when the unit is not to be used for a
long time, unplug it from the household AC outlet. Remember to reset the radio stations and any other memory items before using the
unit again if you haven’t inserted memory batteries.
B
Using batteries
(not included)
Disconnect the AC power supply cord from the unit to operate on
battery power.
The remote control cannot turn the unit on when batteries are used.
C
Removing the batteries
Open the battery cover, insert a finger into the hole in the bottom of
the unit and push out.
Battery life
D
7
“
” flashes on the display when the batteries are running down.
Then, the unit turns itself off and displays “U01”.
Replace all the batteries with new ones.
D
2
1
3
E
7
○
○
○
○
○
○
○
○
○
○
○
○
○
3
Replacing the batteries
4
○
○
○
○
2
1
○
○
○
○
○
○
○
○
○
○
○
○
• The memory batteries last about one year.
• Connect the unit to AC power before replacing the batteries.
• Extend the memory battery life by always pressing [ POWER /I ]
to turn the unit off before disconnecting the unit from the AC
power source or replacing the power batteries.
4
E
4
Removing the batteries
Lift the negative end of the number 4 battery to remove batteries.
RQT6274
RQT6274-C (4-8)En3
(not included)
Memory batteries retain memory (clock/timer/CD/radio settings)
during power supply interruption.
These batteries do not power the unit.
(R6/LR6, AA, UM-3)
○
Memory Batteries
4
12/13/01, 4:04 PM
Location of Controls
A
7
A
■
1 2
3 4
Basic controls
Number
Designation
Reference Page
1 Standby/on switch ( POWER /I )
2
3
4
5
6
7
5
6
8
9
Note
These speakers do not have magnetic shielding. Do not place
them near televisions, personal computers or other devices
easily influenced by magnetism.
B
7
0 ! @
$
C
7
7
Preset equalizer button (PRESET EQ) ..................... 17
Play timer/record timer button (˚ PLAY/REC) ........ 18
Clock/timer button (CLOCK/TIMER) .................... 7, 18
Volume control buttons (+, – VOLUME) ........ 8, 10, 13
Display panel
Time adjust dial
(TIME/PRESET TUNE CD SKIP ) ................... 7, 18
8 Remote control signal sensor (SENSOR) ................. 6
9 Speaker
Before use
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of power.
% ^
( ) ¡ ™
#
Tuner/CD controls
Number
Designation
Reference Page
umber
Designation
Reference Page
0 Band button (TUNER BAND) .................................. 8, 9
! CD play/pause button (6 CD) ................................ 10
@ CD recording mode button (CD REC MODE) .... 15, 16
# CD program/clear, tuner preset button
(•MEMORY *CLEAR) ............................................. 9, 12
$ CD tray
% Tuning/CD search buttons
(REW / – / Q , R / + / FF) ................................ 8, 10
^ CD mode select/stop button (L TAPE/CD) ........ 10, 11
& Preset channel select/CD track select dial
(TIME/PRESET TUNE CD SKIP ) ................... 9, 10
* CD tray open/close button (0 CD) ........................... 10
& *
£
B
■
≤
C
■
Cassette deck controls
Number
(
)
¡
™
£
≤
Designation
Reference Page
Deck eject button (0 DECK) ..................................... 13
Record/record pause button (a/ J) .............. 14, 15, 16
Cassette play button (: TAPE) ................................. 13
Tape mode select/stop button (L TAPE/CD) ..... 13, 14
Deck
Rewind/fast-forward buttons
(REW / – / Q , R / + / FF) .................................... 13
5
RQT6274
RQT6274-C (4-8)En3
5
12/13/01, 4:04 PM
The Remote Control
A
7
A
■
∞
SLEEP TIMER FADER DISPLAY
1
1
2
3
4
5
6
≥10
7
8
9
0
FM MODE/BP C RESET
RANDOM
REPEAT
PRESET EQ
TUNER
CD
⁄
Number
¤
∞ Sleep timer button (SLEEP) ....................................... 19
§ Numbered buttons ............................................ 9, 11, 12
≥ FM mode/BP button (FM MODE/BP) ..................... 8, 16
• Tape counter reset button (C-RESET) ...................... 13
ª Sound virtualizer button (S.VIRTUALIZER) .............. 17
º Auto scan button (AUTO SCAN) ................................. 8
⁄ Timer fader button (TIMER FADER) .......................... 19
¤ Display select button (DISPLAY) ........................... 7, 13
‹ Repeat button (REPEAT) ............................................ 11
› Random play button (RANDOM) ............................... 11
fi Tuning/rewind/fast-forward buttons
(REW/– , +/FF) .......................................................... 8, 13
fl Preset tuning/preset scan/CD skip/search buttons
( S / 4, 3 / T) ................................................... 9, 10
PGM/-CLEAR
Before use
13
§
•
≥
TAPE
‹
11
2
21
16 , 22
ª
º
S.VIRTUALIZER REW
›
10
FF
fi
AUTO SCAN
PRESET TUNE
CD SKIP
–
fl
+
VOLUME
Buttons
5
Designation
Reference Page
When the unit is supplied with AC power, buttons 1 , 2 , 5 , 10 ,
11 , 13 , 16 , 21 and 22 function in the same way as the controls on the
main unit. To save power, the unit cannot be turned on from the remote control when batteries are used.
B
■
7
B
Batteries
(not included)
Insert so the poles (+ and –) match those in the remote control.
R6, AA, UM-3
1
2
Remove if the remote control is not going to be used for a long period
of time. Store in a cool, dark place.
Replace if the unit does not respond to the remote control even when
held close to the front panel.
C
■
Use
Aim at the sensor, avoiding obstacles, at a maximum range of 7 meters
directly in front of the unit.
• Keep the transmission window and the unit’s sensor free from dust.
• Operation can be affected by strong light sources, such as direct
sunlight, and the glass doors on cabinets.
C
7
Do not
• put heavy objects on the remote control.
• take the remote control apart.
• spill liquids onto the remote control.
SENSOR
30°
30°
Transmission
window
6
RQT6274
RQT6274-C (4-8)En3
6
12/13/01, 4:04 PM
3
7
1
7
Setting the Clock
4
2 •7
7
This is a twelve hour clock.
The example shows how to set the clock to 1:30 p.m.
/I ] to turn the unit on.
1 Press [
■
2 Press [CLOCK/TIMER] to select clock.
■
POWER
ON ˚PLAY
Clock
˚REC OFF
ON ˚REC
3 Turn [TIME/PRESET TUNE
■
CD SKIP
Original display
Within 10 seconds
1
7
7
○
○
○
7
○
○
] to set
the time.
4 Press [CLOCK/TIMER] to start the clock.
■
POWE
R
The original display is restored shortly after.
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
2
○
˚PLAY OFF
Before use
Each time you press the button:
When batteries are used
The unit cannot be turned on with the remote control.
Note
The clock may lose or gain some time over a period.
Readjust if necessary.
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
3
A
Displaying the clock
Remote control only
Press [DISPLAY].
7
○
○
4
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
B
Using Headphones (not included)
Reduce volume before connection.
Plug type: 3.5 mm (1/8˝ ) stereo
Note
Avoid listening for prolonged periods of time to prevent hearing damage.
A
7
SLEEP TIMER FADER DISPLAY
1
2
3
4
5
6
DISPLAY
PGM/-CLEAR
≥10
B
7
PHONES
7
RQT6274
RQT6274-C (4-8)En3
7
12/13/01, 4:04 PM
3
7
A
2
7
1
7
The Radio
Preparation: (when using batteries) Press [ POWER /I ].
A
1 Press [TUNER BAND] to select “FM” or “AM”.
■
(Unit comes on when using AC power.)
Each time you press the button:
AM ↔ FM
1
7
2
7
Listening
○
○
○
3
7
○
○
B
7
○
○
Q]
[ REW/–/Q
2 Press
■
station.
“
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
3 Press [+, – VOLUME] to adjust the volume.
■
B
○
○
” is displayed during FM stereo broadcasts.
○
REW
○
or [ R/+/FF ] to select a
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Using auto scan
Remote control only
You can search for a station by listening to all tuned-in stations for 8
seconds each.
VOLUME
1 Press [TUNER] to select “FM” or “AM”.
■
2 Press [AUTO SCAN].
■
[AUTO SCAN] when you find the desired
3 Press
■
station.
Auto scan starts.
PRESET EQ
○
TAPE
TUNER
1
7
CD
FF
S.VIRTUALIZER REW
2 •7
3
7
1
7
2
7
○
Normal tuning
AUTO SCAN
PRESET TUNE
CD SKIP
–
Auto scan ends when it reaches the original frequency again.
To stop during the process, press [AUTO SCAN].
+
VOLUME
C
TUNER
If noise is excessive in FM
Remote control only
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Indicates auto scan
AUTO SCAN
Press [FM MODE/BP] to display “
Monaural sound is selected (“
reception is weak.
MONO
”.
” goes off) and noise reduces when
Press [FM MODE/BP] again to cancel the mode.
Auto-tuning
3
7
○
○
○
7
C
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
AUTO SCAN
FM MODE/BP
○
○
○
○
○
○
○
○
○
Press and hold [REW / – / Q] or [R / + / FF] until the frequency
starts changing rapidly.
The frequency stops when it finds a station. (Interference may also
cause it to stop. Start auto-tuning again if this occurs.)
To stop auto-tuning
Press [REW / – / Q] or [R / + / FF].
D To improve reception
■
FM MODE/BP C RESET
RANDOM
REPEAT
PRESET EQ
TUNER
CD
TAPE
S.VIRTUALIZER REW
AUTO SCAN
FM: Change the length and direction of the antenna.
AM: Change the facing of the unit.
FF
Note
• AM reception is briefly interrupted if [0 DECK] is pressed.
• To improve reception when using the unit in a building or vehicle,
use it near a window.
PRESET TUNE
CD SKIP
VOLUME
D
7
○
To receive FM broadcasts allocated in 0.1MHz
FM
AM
8
Main unit only
First press [TUNER BAND] to select “AM”. Now, press and hold
[TUNER BAND]. The display changes in a few seconds to show the
current lowest FM frequency. Continue to hold down the button.
The minimum frequency changes and the step is changed at the
same time. Changing the step erases all preset stations.
Repeat the above to change the step back.
RQT6274
RQT6274-C (4-8)En3
8
12/13/01, 4:04 PM
2
1 •7
2 7
7
A
The Radio
Preparation: (when using batteries) Press [ POWER /I ].
Preset tuning
Tuning is simpler if you preset stations.
You can preset 12 FM and 12 AM stations.
A
1
7
2
7
○
○
○
2
7
1
2
3
4
5
6
≥10
7
8
9
0
1
7
PGM/-CLEAR
Presetting radio stations
Preparation: Tune to the station you want to preset. (\ page 8)
1 Press [•MEMORY CLEAR].
■
2 Turn [TIME/PRESET TUNE
■
*
While “
” is flashing
CD SKIP ] to select
a channel and press [•MEMORY *CLEAR].
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
On the remote control
Press the numbered button(s) to enter the station into a
channel (1 to 12).
To enter channel 10, 11 or 12
≥10], then the two digits.
Press [≥
○
If “
Listening
SLEEP TIMER FADER DISPLAY
” goes off during presetting, return to step ■
1.
Selecting channels
Preparation: Press [TUNER BAND] to select “FM” or “AM”.
B Turn [TIME/PRESET TUNE
■
the channel.
B
7
CD SKIP
] to select
On the remote control
Press the numbered button(s) to select the channel (1 to 12).
≥10], then the two digits.
To select channel 10, 11 or 12, press [≥
C
Using preset scan
You can search for a station by listening to all preset channels for 8
seconds each.
Remote control only
Preset channel
Preparation: Press [TUNER] to select “FM” or “AM”.
and hold [ S / 4 ] or [ 3 / T ] until “PS”
1 Press
■
appears on the display.
Preset scan starts.
[ S / 4 ] or [ 3 / T ] when you find the de2 Press
■
sired channel.
C
7
PRESET EQ
TAPE
TUNER
1
7
2
7
○
1 •7
2
7
+
VOLUME
○
○
○
○
○
○
Cancelling a preset channel
1
2
3
4
e.g. If channel 3 is not needed
Select channel 3.
Press [•MEMORY *CLEAR].
While “
” is flashing
CD SKIP ] to display “– –”.
Turn [TIME/PRESET TUNE
Press [•MEMORY *CLEAR].
Now, when you perform preset scan or turn [TIME/PRESET TUNE
CD SKIP ] to select a preset channel, channel 3 is skipped.
Indicates preset scan
PRESET TUNE
CD SKIP
○
Preset scan ends after searching through each preset channel once.
3 / T ].
To stop during the process, press [ S / 4] or [3
FF
PRESET TUNE
CD SKIP
–
○
CD
S.VIRTUALIZER REW
AUTO SCAN
○
TUNER
○
○
○
○
PRESET TUNE
CD SKIP
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Hints
• To select the cancelled channel, press the remote control’s numbered buttons.
3 / T ] on the remote control for
• You can press [ S / 4] or [3
turning of [TIME/PRESET TUNE
CD SKIP ] described
above.
9
RQT6274
RQT6274-C (9-14)En2
9
12/13/01, 4:05 PM
CDs
2
7
TAPE ⁄ CD
1 Press [0 CD] to open the tray.
■
(The unit comes on.)
Load a CD and press [0 CD] to close the tray.
2 Press [ 6 CD] to start play.
■
3 Press [ +, – VOLUME] to adjust the volume.
■
Plays to the end of the CD and stops.
Listening
To stop play
3
7
Press [L TAPE/CD].
1
7
One touch play (When using AC power)
When a CD is loaded, press [ 6 CD].
The unit comes on and play starts.
To pause play
1
7
Press [ 6 CD] during play.
Press again to resume play.
To skip tracks
Turn [TIME/PRESET TUNE
CD SKIP ] clockwise (forward) or
counter-clockwise (backward).
On the remote control
3 / T ] (forward).
Press [S / 4] (backward) or [3
7
○
○
○
Label must face upward
○
○
2
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Searching through tracks
○
○
○
○
○
○
CD
Elapsed time of track in play
Track number in play
Press and hold [REW / – / Q] (backward) or [R / + / FF] (forward)
during play.
On the remote control
3 / T ] (forward) during
Press and hold [ S / 4] (backward) or [3
play.
Note
Separate this unit from radios and televisions if it causes interference.
A
3
7
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
VOLUME
CD selection
b
Do not
A
7
○
○
• use irregularly shaped CDs ( ).
• use CDs with labels and stickers that are coming off or with
adhesive exuding from under labels and stickers. ( )
• attach scratch-proof covers or any other kind of accessory.
• write anything on the CD.
• clean CDs with liquids. (Wipe with a soft, dry cloth.)
• use CDs printed with label printers available on the market.
a
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
b
○
○
10
○
○
○
c
RQT6274
RQT6274-C (9-14)En2
a
Choose CDs with this mark: ( )
This unit can play CD-DA (digital audio) format audio CD-R and CDRW that have been finalized (a process that enables CD-R/CD-RW
players to play audio CD-R and CD-RW) upon completion of
recording.
It may not be able to play some CD-R or CD-RW due to the condition
of the recording.
10
12/13/01, 4:05 PM
c
CDs
Other modes of play
SLEEP TIMER FADER DISPLAY
1
7
2
3
4
5
6
≥10
7
8
9
0
RANDOM
REPEAT
FM MODE/BP C RESET
PRESET EQ
TAPE
TUNER
Remote control only
A
REPEAT
FF
Direct access play
Starts play from a selected track
Select the track with the numbered buttons.
2
7
CD
S.VIRTUALIZER REW
A
7
Preparation: Press [L] to switch to CD mode.
PGM/-CLEAR
≥10], then the two digits.
For two-digit tracks, press [≥
B
Repeat play
Plays a track or all tracks repeatedly
Press [REPEAT] before or during play to select a mode.
Each time you press the button:
1
1
2
3
4
5
6
≥10
7
8
9
0
: One-track repeat
Listening
Numbered buttons
1
: All-track repeat
(No display) : Cancel
B
7
○
○
○
Press [CD] to start play if in the stop mode.
○
2
7
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
REPEAT
To repeat selected tracks
1 Start program play (\ page 12).
2 Press [REPEAT] to select “
1
7
○
○
”.
To cancel
Press [REPEAT] until “ 1
” and “
” are cleared.
The mode is also cancelled if the CD tray is opened.
RANDOM
Random play
Plays the tracks once each in random order
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
1 Press [RANDOM] during CD stop mode.
■
2 Press [CD] to start play.
■
CD
To cancel
Press [RANDOM] to clear “
”.
If cancelled during play, play continues to the end of the CD.
The mode is also cancelled if the CD tray is opened.
Note
• Random play cannot be used together with 1-track repeat and program play.
• You cannot select tracks with the numbered buttons.
• You cannot skip to tracks already played.
• Search can be done within the track in play only.
11
RQT6274
RQT6274-C (9-14)En2
11
12/13/01, 4:05 PM
TAPE ⁄ CD
CDs
3
1 7
2
7
7
Program play
Select up to 36 tracks to play in the order you choose.
On the main unit
Preparation: Press [ … TAPE/CD] to switch to CD mode.
1
7
Track number
[TIME/PRESET TUNE
1 Turn
■
the track.
2 Press [•MEMORY CLEAR].
■
Play time
CD SKIP
] to select
*
Listening
Repeat steps ■
1 and ■
2 to program other tracks.
2
7
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Programmed track
○
○
○
○
○
○
○
3 Press [ 6 CD] to start play.
■
Play sequence
On the remote control
Preparation: Press [L] to switch to CD mode.
3
7
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
1
Press [PGM/*CLEAR].
2
Enter the track number with the numbered
buttons.
“
” appears on the display.
○
CD
For tracks numbered 10 and over, press [≥
≥10] then the two
digits.
Repeat this step to program other tracks.
1
2
3
4
5
6
≥10
7
8
9
0
FM MODE/BP C RESET
RANDOM
REPEAT
PRESET EQ
TUNER
CD
2
TAPE
3
1
PGM/-CLEAR
Press [CD] to start play.
The program remains intact even if play is stopped or the unit is
turned off. “Cd-P” appears when play is stopped to indicate the contents are in the memory.
3
To cancel
S.VIRTUALIZER REW
FF
Press and hold [•MEMORY *CLEAR] (remote control: [PGM/
CLEAR]) in the stop mode until “CLEAR” is displayed.
The mode is also cancelled if the CD tray is opened.
*
AUTO SCAN
PRESET TUNE
CD SKIP
VOLUME
“FULL” is displayed
1
PGM/-CLEAR
If 36 tracks have already been programmed.
“– –:– –” is displayed
If the total play time of the program exceeds 100 minutes.
You can still program and play tracks.
○
○
○
○
○
2
○
○
○
○
○
○
○
○
○
○
1
2
3
4
5
6
≥10
7
8
9
0
○
○
○
○
○
○
○
○
○
○
Programmed track
○
3
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
A To check the program contents (while “Cd-P” is dis■
played)
Play sequence
Turn [TIME/PRESET TUNE
CD SKIP
On the remote control
3 / T ].
Press [S / 4] or [3
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
CD
A
7
12
RQT6274
RQT6274-C (9-14)En2
12
12/13/01, 4:05 PM
].
Cassettes
TAPE ⁄ CD
1 Press [0 DECK] to open the deck.
■
REW
(The unit comes on.)
Load a cassette and close the deck by hand.
2 Press [ : TAPE] to start play.
■
3 Press [+, – VOLUME] to adjust the volume.
■
To stop play
Listening
1 7
2
7
3
7
Press [ L TAPE/CD].
One touch play (When using AC power)
When a cassette is loaded, press [: TAPE].
The unit comes on and play starts.
Side to be played back facing up
Fast-forward and rewind
DECK
Press [REW / – / Q] (rewind) or [R / + / FF] (fast-forward).
On the remote control
Press [REW / –] (rewind) or [+ / FF] (fast-forward).
Selection of tapes
2
7
○
○
○
3
7
○
○
○
Insert the cassette with the exposed tape facing you.
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Use normal position tapes to play correctly.
High position and metal position tapes can be played, but the unit will
not be able to do full justice to the characteristics of these tapes.
Recording
1
7
Cassette tape care
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
• Tapes exceeding 100 minutes are thin and can break or get caught
in the mechanism.
• Tape slack can get caught up in the mechanism and should be
taken up before the tape is played.
• Endless tapes can get caught up in the deck’s moving parts if used
incorrectly.
VOLUME
Tips on Recording
Use household AC power or new batteries when recording to avoid
poor recordings caused by the batteries running down.
Televisions can cause interference to recordings made on this unit
if the two are too close to each other.
A
7
DISPLAY
SLEEP TIMER FADER DISPLAY
Selection of tapes for recording
1
2
3
4
5
6
≥10
7
8
9
0
FM MODE/BP C RESET
RANDOM
REPEAT
PRESET EQ
TUNER
CD
Use normal position tapes.
High position and metal position tapes can be used, but the unit will
not be able to record or erase them correctly.
PGM/-CLEAR
Volume and sound quality in recording
○
○
○
○
○
○
○
○
TAPE
REW
S VIRTUALIZER
○
○
○
○
○
○
a
○
○
FF○
• Recording level is set automatically.
• Recordings are unaffected by changes to sound quality.
C RESET
○
○
○
○
○
○
○
○
○
○
○
○
○
A
To display the tape counter while recording
Remote control only
Press [DISPLAY].
Each time you press the button in the CD or radio mode:
a Present state
b Present time
c Tape counter
b
To reset the tape counter
Press [C-RESET].
The counter resets to “000”.
c
13
RQT6274
RQT6274-C (9-14)En2
13
12/13/01, 4:05 PM
A
7
Tips on Recording
To protect tapes against further recording
A
Side A
Erasure prevention
The illustration shows how to remove the tabs to prevent recording.
To record on the tape again, cover as shown.
B
Tab for side “B”
Tab for side “A”
To re-record
Normal position tape
A
B
7
3
1
Erasing recordings
1 Press [0 DECK] to open the deck and insert the cassette with
Adhesive
tape
the side to be erased facing up.
2 Press [L TAPE/CD] to switch to TAPE mode.
3 Press [a/ J].
2
Recording CDs
Recording
C
■
Normal recording
Preparations:
• Insert a CD (\ page 10).
• Wind on the leader tape.
C
7
3
2
1
7
7
7
1 Press [0 DECK] to open the deck.
■
Load a cassette with the side for recording facing up and close
the deck by hand.
2 Press [
■
L TAPE/CD] to switch to CD mode.
Each time you press the button:
TAPE ↔ Cd
3 Press [a/ J] to start recording.
■
CD play and recording start at the same time.
The cassette stops when the CD finishes.
To stop recording
Press [L TAPE/CD].
D To pause recording
■
Press [a/ J].
Press again to resume recording.
1
7
2
7
3
7
○
○
○
○
○
○
Side to be recorded facing up
DECK
To continue recording from another CD on the same cassette
1 Press [0 CD] and replace the CD.
2 Press [a/ J].
Insert the cassette with the exposed tape facing you.
○
○
○
○
○
To record selected tracks
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
TAPE ⁄ CD
○
○
○
○
○
1 Do step ■
1., then program the tracks (\
2 Press [a/ J].
To skip unwanted tracks
1 Press [a/ J] to pause recording (the CD also pauses).
2 Turn [TIME/PRESET TUNE CD SKIP ] so the next track
you want to record is displayed.
3 Press [a/ J] to resume recording.
D
7
14
RQT6274
RQT6274-C (9-14)En2
page 12).
14
12/13/01, 4:05 PM
Recording CDs
3 7 7
7
4
ALL-REC
2
7
1
Records the whole CD or selected tracks. When the tape finishes
before CD, recording and CD pauses for you to resume recording on
the opposite side.
Preparation: Insert a CD (\ page 10).
1 Press [ L TAPE/CD] to switch to CD mode.
■
2 Press [CD REC MODE] to display “ALL-REC”.
■
Each time you press the button:
ALL-REC
○
[0 DECK] to open the deck and load a cas3 Press
■
sette with the side for recording facing up.
4 Press [a/ J] to start recording.
■
TAPE ⁄ CD
The unit rewinds the tape, records 10 seconds of silence, and
then starts recording.
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
To stop recording
Recording
2
7
○
OFF
The display shows the tape length needed.
“C – – – –” indicates the tape needed exceeds 100 minutes.
You can still record, but some tracks may not be recorded if the
tape isn’t long enough.
1
7
○
1-REC
Press [L TAPE/CD]. The CD also stops.
If a track is interrupted at the end of the side facing up
3
7
○
○
○
7
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
DECK
Recording and CD pauses.
To record the track again on the opposite side
1. Press [0 DECK], flip the cassette, and insert it.
2. Press [a/ J].
The unit records 10 seconds of silence, and resumes recording
from the beginning of the cut-off track.
To record selected tracks
1 Program tracks (\ page 12).
○
○
○
○
○
○
○
○
○
○
○
4
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
2 Do steps ■
2. to ■
4..
Note
You cannot use ALL-REC with random play and repeat play (\ page
11).
15
RQT6274
RQT6274-C (15-22)En1
15
12/13/01, 4:06 PM
A
Recording CDs
2
3
4 7
1 7
7
7
A
■
1-REC
Records a selected track from the CD and stops.
Preparations:
Insert a CD (\ page 10) and a cassette (\ page 13).
Wind the tape on to where you want to start recording.
1
7
2
7
○
○
3
7
○
Recording
○
○
○
1 Press [L TAPE/CD] to switch to CD mode.
■
2 Press [CD REC MODE] to display “1-REC”.
■
TAPE ⁄ CD
Each time you press the button:
ALL-REC
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
1-REC
OFF
○
Turn [TIME/PRESET TUNE
CD SKIP
3 the
■
track you want to record.
4 Press [a/ J] to start recording.
■
] to select
CD play and recording start at the same time.
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
To stop recording
Press [L TAPE/CD]. The CD also stops.
To continue recording from another CD
4
7
○
○
○
1. Press [0 CD] and replace the CD.
2. Do steps ■
3. to ■
4..
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
To record a track in play
1 Press [CD REC MODE] to display “1-REC”.
2 Press [a/ J ].
Recording starts from the beginning of the track and stops when the
track finishes.
B
17
3
7
7
Note
Recording and CD will stop when the tape reaches its end, even if the
track has not finished.
TAPE ⁄ CD
B
1
7
3
7
○
○
○
Recording the Radio
Preparations:
• To record from the beginning of the tape:
Wind on the leader tape.
• To record from part way through the tape:
Wind the tape on to where you want to start recording.
DECK
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
a cassette with the side for recording facing
1 Load
■
up.
2 Tune to the station \
■
3 Press [a/ J] to start recording.
■
(
page 8).
To stop recording
Press [L TAPE/CD].
7
To pause recording
C
FM MODE/BP
1
2
3
4
5
6
≥10
7
8
9
0
FM MODE/BP C RESET
RANDOM
REPEAT
PRESET EQ
TUNER
CD
16
TAPE
PGM/-CLEAR
Press [a/ J].
Press again to resume recording.
C Reducing noise when recording AM (Beat Proof func■
tion)
Remote control only
Press [FM MODE/BP] while recording.
Each time you press the button:
bP1 ↔ bP2
Choose the setting with the least noise.
RQT6274
RQT6274-C (15-22)En1
16
12/13/01, 4:06 PM
A
7
A
Sound Quality
PRESET EQ
You can choose one of four types of sound quality.
a XBS: Adds punch to rock
b Clear: Clarifies higher sounds
c Soft: For background music
d Vocal: Adds gloss to vocals
Press [PRESET EQ] to select a setting.
Each time you press the button:
a XBS
b Clear c Soft
d Vocal
EQ-OFF (cancelled)
Note
Changes to sound quality do not affect recordings.
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
PRESET EQ
a
B
3-D sound with the Sound Virtualizer
Remote control only
You can create a three-dimensional sound field when listening to
stereo sound.
b
Press [S.VIRTUALIZER].
Note
• This feature does not affect recordings.
• The actual effect depends on the source played.
c
d
FM MODE/BP C RESET
RANDOM
REPEAT
PRESET EQ
TUNER
CD
S.VIRTUALIZER REW
S.VIRTUALIZER
AUTO SCAN
B
7
TAPE
Sound Quality and Sound Field
Press again to cancel.
FF
PRESET TUNE
CD SKIP
S.VIRTUALIZER
17
RQT6274
RQT6274-C (15-22)En1
17
12/13/01, 4:06 PM
5
7
3
1 •7
2 •7
7
2 •7
3 7
4
7
2
1
The Play and Record Timer
2
You can set the timer to come on at a certain time to wake you up
(play timer) or to record a radio station (record timer).
1
Preparations:
Turn the unit on and set the clock. (\ page 7)
• For play timer, prepare the music source (tape/CD/radio) for listening, and set the volume.
• For record timer, check the cassette’s erasure prevention tab (\
page 14: ■
A ) and load the cassette with the side for recording facing
up. Tune to the radio station (\ page 8 to 9), and set the volume.
7
Setting the start and finish times
1
[CLOCK/TIMER] to select the desired timer
1 Press
■
function.
Each time you press the button:
Clock
ON œPLAY
œPLAY OFF
FOR PLAY TIMER
○
œREC OFF
Original display
ON œREC
ON ˚ PLAY : to set the play timer
ON ˚ REC : to set the record timer
Proceed to step ■
2 before these indicators stop flashing
(about 10 seconds).
7
○
FOR RECORD TIMER
○
○
○
2
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
1
Turn [TIME/PRESET TUNE
2 1 the
■
start time.
CD SKIP
] to set
CD SKIP
] to set
2 Press [CLOCK/TIMER].
Turn [TIME/PRESET TUNE
3 1 the
■
finish time.
2 Press [CLOCK/TIMER].
The start and finish times are now set.
Turning the timer on
˚ PLAY/REC] to display the timer indicator.
4 Press [˚
■
2
Each time you press the button:
Timer
PLAY
3
7
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
1
REC
no display (off)
˚ PLAY: to turn the play timer on
˚ REC : to turn the record timer on
(The indicator doesn’t appear if the start and finish times
haven’t been set.)
“E” appears if the clock hasn’t been set.
5 Press [
■
POWER
/I ] to turn the unit off.
The unit must be off for timer to operate.
The record timer comes on about 30 seconds earlier than the
set time.
To cancel the timer
˚ PLAY/REC] when the unit is on to clear the timer indicaPress [˚
tors from the display.
(The timer comes on at the set time everyday if the timer is on.)
2
4
7
○
○
5
7
○
18
○
○
○
To check the settings (when unit is off)
Press [CLOCK/TIMER].
The settings are shown in the following order:
Start time, Finish time
Music source
Volume
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
To change the settings (when unit is on)
To change the times
1,■
2,■
3 , and ■
5.
Do steps ■
To change the source or volume
˚ PLAY/REC] to clear the timer indicator.
1. Press [˚
2. Make changes to the source or volume.
3. Do steps ■
4 to ■
5.
○
○
○
○
○
○
○
○
POWE
R
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
You can enjoy your desired source after you have set the timer.
Turn the unit off before the timer’s start time.
Note
The play and record timers cannot be used together.
RQT6274
RQT6274-C (15-22)En1
Original display
○
18
12/13/01, 4:06 PM
A
A
7
Remote control only
○
○
○
○
○
You can set the unit to turn off after certain time. (e.g. when you
want to fall asleep while listening to music.)
SLEEP TIMER FADER DISPLAY
SLEEP
○
The Sleep Timer
○
○
○
○
○
1
2
3
4
5
6
≥10
7
8
9
0
○
○
○
○
○
○
Press [SLEEP] to select the time (minutes).
PGM/-CLEAR
○
○
Each time you press the button:
SLEEP 30
SLEEP 60
SLEEP 90
SLEEP 120
SLEEP OFF
○
○
○
○
○
○
○
○
○
○
○
To cancel
Press [SLEEP] to select “SLEEP OFF”.
SLEEP
To check the remaining time
Press [SLEEP] once.
The remaining time is shown for about 5 seconds.
Time setting
To change the setting
Press [SLEEP] to select the new time.
Note
You can use sleep timer in combination with play and record timer.
Make sure the unit is off before the play/record timer’s start time.
B
7
B
The Timer Fader
Volume increases slowly to the set level when a timer turns the unit
on and decreases slowly when the sleep timer turns the unit off.
SLEEP TIMER FADER DISPLAY
TIMER FADER
○
○
○
○
○
○
○
1
2
3
4
5
6
≥10
7
8
9
0
○
○
○
○
○
○
PGM/-CLEAR
○
○
○
Press [TIMER FADER] to display “
Timer
Remote control only
”.
(All timers will be affected.)
Press again to cancel.
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Note
This feature does not affect record timer’s recordings.
TIMER FADER
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
Reference
Maintenance
• Never use alcohol, paint thinner, or benzine to clean this unit.
• Before using chemically treated cloth, read the instructions that
came with the cloth carefully.
For a cleaner crisper sound
Clean the heads after every 10 hours of use to assure good quality
playback and recording.
Use a cleaning tape (not included).
19
RQT6274
RQT6274-C (15-22)En1
19
12/13/01, 4:06 PM
Troubleshooting
Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in
the chart do not solve the problem, contact Panasonic Canada Inc. Customer Care Centre at 905-624-5505, web site (www.panasonic.ca),
or an authorized Servicentre closest to you.
Reference pages are shown as black circled numbers (e.g. 4)
Common problems
Indicates incorrect operation. Read the instructions.
Replace the batteries or use household AC power. 4
Power batteries haven’t been inserted. Insert them or use household AC power. (“U02” appears only if you have inserted memory batteries.) 4
“E” is displayed.
“U01” is displayed.
“U02” is displayed.
CD
CD won’t play or CD display is incorrect.
Certain sections are not played properly.
Place the CD label facing up. !
Wait for an hour for condensation to dry and try again.
Clean the CD. !
Replace the CD if it is scratched, warped, or non-standard.
Cassette deck
Recording is not possible.
Poor sound quality.
If the cassette’s tabs have removed, cover the holes with adhesive tape. %
Clean the heads. +
Radio
A lot of noise or difficult to tune.
Interference may be caused by other equipment or the use of its remote control. Turn the
other equipment off or separate this unit from them.
Remote control
Check that the batteries are inserted correctly. 6
Replace the batteries if they are worn. 6
The unit can’t be turned on from the
remote control.
Turn the unit on from the main unit if you are using batteries to power the unit. 4, 6
Reference
The remote control doesn’t work.
20
RQT6274
RQT6274-C (15-22)En1
20
12/13/01, 4:06 PM
Product Service
1. Damage requiring service —The unit should be serviced by
qualified service personnel if:
(a) The AC power supply cord or AC adaptor has been damaged;
or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked
change in performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing—Do not attempt to service the unit beyond that
described in these operating instructions. Refer all other
servicing to authorized servicing personnel.
3. Replacement parts—When parts need replacing ensure the
servicer uses parts specified by the manufacturer or parts that
have the same characteristics as the original parts.
Unauthorized substitutes may result in fire, electric shock, or
other hazards.
4. Safety check—After repairs or service, ask the servicer to
perform safety checks to confirm that the unit is in proper
working condition.
Product information
For product information or assistance with product operation:
Contact Panasonic Canada Inc. Customer Care Centre at
905-624-5505, web site (www.panasonic.ca), or an authorized
Servicentre closest to you.
Specifications
Radio
Frequency range
FM
87.9 – 107.9 MHz (200 kHz steps)
87.5 – 108.0 MHz (100 kHz steps)
520 – 1710 kHz (10 kHz steps)
AM
CD player
Sampling frequency
Decoding
Beam source
No. of channels
Wow and flutter
D/A converter
44.1 kHz
16 bit linear
Semiconductor laser (wavelength 780 nm)
2 channel, stereo
Below measurable limit
MASH (1 bit DAC)
Tape recorder
Track system
Monitor system
Recording system
Erasing system
Frequency range
Normal position
4 track, 2 channel, stereo
Variable sound monitor
AC bias
Multi Pole magnet
50 Hz – 14000 Hz
General
Speakers
Jacks
Output
Power requirement
AC
8 cm 5.4 Ω x 2
PHONES: 3.5 mm stereo (16 – 32 Ω)
120 V, 60 Hz
Power consumption: 32 W
Battery
12 V [Eight R20/LR20 (D, UM-1) batteries]
•Do not use rechargeable type batteries.
Memory back-up for computer/clock
6 V [Four R6/LR6 (AA, UM-3) batteries]
•Do not use rechargeable type batteries.
Dimensions (W x H x D)
529 x 144 x 276 mm
(2013/16˝ x 511/32˝ x 107/8˝ )
Mass
4.5 kg (9 lb. 15 oz.) without batteries
Power consumption in standby mode: 3.1 W
Reference
Note
Specifications are subject to change without notice.
Mass and dimensions are approximate.
21
RQT6274
RQT6274-C (15-22)En1
21
12/13/01, 4:06 PM
Warranty
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC/TECHNICS PRODUCT—LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship
and agrees to remedy any such defect for a period as stated below from the date of original
purchase.
Technics Audio Product
Two (2) years, parts and labour
Panasonic Portable/Clock Radio (without Tape, CD, MD) Two (2) years, parts and labour
Panasonic Audio/SD Audio Product
One (1) year, parts and labour
Panasonic DVD Product
One (1) year, parts and labour
Accessories including rechargeable batteries
Ninety (90) days
LIMITATIONS AND EXCLUSIONS
This warranty does not apply to products purchased outside Canada or to any product which has
been improperly installed, subjected to usage for which the product was not designed, misused or
abused, damaged during shipping, or which has been altered or repaired in any way that affects the
reliability or detracts from the performance, nor does it cover any product which is used commercially. Dry cell batteries are also excluded from coverage under this warranty.
This warranty is extended to the original end user purchaser only. A purchase receipt or other proof
of date of original purchase is required before warranty service is performed.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, EXCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT
OR CONSEQUENTIAL DAMAGES.
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions
may not be applicable.
WARRANTY SERVICE
For product operation and information assistance, please contact your Dealer or our Customer
Care Centre at: Telephone #: (905) 624-5505 Fax #: (905) 238-2360 Web: www.panasonic.ca
For product repairs, please contact one of the following:
• Your Dealer who will inform you of an authorized Servicentre nearest you.
• Our Customer Care Centre at (905) 624-5505 or www.panasonic.ca
• A Panasonic Factory Servicentre listed below:
Richmond,
British Columbia
Panasonic Canada Inc.
12111 Riverside Way
Richmond, BC
V6W 1K8
Tel: (604) 278-4211
Fax: (604) 278-5627
Calgary, Alberta
Mississauga, Ontario
Lachine, Québec
Panasonic Canada Inc.
6835-8th St. N. E.
Calgary, AB
T2E 7H7
Tel: (403) 295-3955
Fax: (403) 274-5493
Panasonic Canada Inc.
5770 Ambler Dr.
Mississauga, ON
L4W 2T3
Tel: (905) 624-8447
Fax: (905) 238-2418
Panasonic Canada Inc.
3075, rue Louis A. Amos
Lachine, QC
H8T 1C4
Tel: (514) 633-8684
Fax: (514) 633-8020
CUSTOMER’S RECORD:
Customer Name:
Model Number:
Serial Number:
Date of Purchase:
Dealer’s Name:
Address:
Phone Number:
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the original carton.
Include details of the defect claimed, and proof of date of original purchase.
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
www.panasonic.ca
22
En
RQT6274-C
© 2001 Matsushita Electric Industrial Co., Ltd.
Printed in Malaysia
L1201TC0
RQT6274
RQT6274-C (15-22)En1
22
12/13/01, 4:06 PM
Download PDF

advertising