Panasonic | SCAK350 | Operating instructions | Panasonic SCAK250 Operating Instructions

Operating Instructions
CD Stereo System
Model No.
The illustrations show SC-AK350.
SC-AK350
SC-AK250
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these
instructions carefully.
These operating instructions are applicable to the following
systems.
AK350 : indicates features applicable to SC-AK350 only.
AK250 : SC-AK250 only.
System
SC-AK350
SC-AK250
Main unit
SA-AK350
SA-AK250
Speakers
SB-AK350
SB-AK250
SUPPLIED ACCESSORIES
Please check and identify the supplied accessories.
Use numbers indicated in parentheses when asking for
replacement parts. (As of January 2007)
1 x AC mains lead
For the United Kingdom
2 x Remote control
batteries
(K2CT3CA00004)
1 x FM indoor antenna
For Continental Europe
(K2CQ2CA00006)
(RSA0007-L)
For Australia and N.Z.
(K2CJ2DA00008)
For Australia and N.Z.
(RSA0006-L)
1 x Remote Control
For Europe
For Europe
1 x AM loop antenna
(N1DAAAA00001)
(N2QAYB000143)
For Australia and N.Z.
(N2QAYB000144)
Operations in these instructions are described mainly using
remote control, but you can perform the operations on the
main unit if the controls are the same.
Unless otherwise indicated, illustrations in these operating
instructions are of SC-AK350 for the United Kingdom and
Continental Europe.
Your unit may not look exactly the same as illustrated.
E
EB GN
RQTV0196-2B.indd 1
Table of contents
Caution for AC Mains Lead .....................4
Safety precautions ..................................4
Handling of the disc trays and discs .....5
Placement of speakers............................5
Getting started .........................................6
Overview of controls ...............................8
Discs .........................................................9
Cassette tape – Play and record ..........12
FM/AM radio ...........................................13
Timer .......................................................14
Sound adjustment .................................15
External unit ...........................................15
Troubleshooting guide ..........................17
Maintenance ...........................................18
When moving the unit ...........................18
Specifications ........................................19
Before connecting, operating or adjusting this product,
please read these instructions completely.
Please keep this manual for future reference.
Note:
“EB” on the packaging indicates the United Kingdom.
RQTV0196-2B
3/27/07 3:23:07 PM
DANSK
ESPAÑOL
(Back of product)
RQTV0196
LANG - 5
LANG - 4
FRANÇAIS
Inside of product
Tuotteen sisällä
Produktets innside
2
RQT8043
RQTV0196-B.indd 2
2/23/07 4:48:37 PM
RQT8043
3
RQTV0196-B.indd 3
2/23/07 4:48:39 PM
RQTV0196
LANG - 5
LANG - 4
FRANÇAIS
DANSK
DEUTSCH
Caution for AC Mains Lead
DANSK
ESPAÑOL
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains
plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that
the replacement fuse has a rating of 5-ampere and that it is
approved by ASTA or BSI to BS1362.
Check for the ASTA mark m or the BSI mark o on the body
of the fuse.
If the plug contains a removable fuse cover you must ensure
that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a
replacement cover is obtained.
A replacement fuse cover can be purchased from your local
dealer.
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR
THE SOCKET OUTLET IN YOUR HOME THEN THE
FUSE SHOULD BE REMOVED AND THE PLUG CUT
OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED INTO
ANY 13-AMPERE SOCKET.
The wire which is coloured Brown must be connected to the
terminal which is marked with the letter L or coloured Brown
or Red.
WARNING: DO NOT CONNECT EITHER WIRE TO THE
EARTH TERMINAL WHICH IS MARKED WITH THE
LETTER E, BY THE EARTH SYMBOL n OR COLOURED
GREEN OR GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF—KEEP DRY.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC
mains plug (figures A and B). Confirm the AC mains plug
fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
Figure A
Figure B
Fuse cover
If a new plug is to be fitted please observe the wiring code as
stated below.
If in any doubt please consult a qualified electrician.
FRANÇAIS
IMPORTANT
The wires in this mains lead are coloured in accordance with
the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured
markings identifying the terminals in your plug, proceed as
follows:
The wire which is coloured Blue must be connected to the
terminal which is marked with the letter N or coloured Black
or Blue.
2. Replace the fuse and close or attach the fuse cover.
Figure A
Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
LANG - 4
Safety precautions
Placement
Set the unit up on an even surface away from direct
sunlight, high temperatures, high humidity, and excessive
vibration. These conditions can damage the cabinet and
other components, thereby shortening the unit’s service life.
Place it at least 15 cm away from wall surfaces to avoid
distortion and unwanted acoustical effects.
Do not place heavy items on the unit.
Voltage
LANG - 5
Do not use high voltage power sources. This can overload
the unit and cause a fire.
Do not use a DC power source. Check the source
carefully when setting the unit up on a ship or other place
where DC is used.
RQTV0196
AC mains lead protection
4
Ensure the AC mains lead is connected correctly and not
damaged. Poor connection and lead damage can cause fire
or electric shock. Do not pull, bend, or place heavy items on
the lead.
Grasp the plug firmly when unplugging the lead. Pulling
the AC mains lead can cause electric shock.
Do not handle the plug with wet hands. This can cause
electric shock.
Foreign matter
Do not let metal objects fall inside the unit. This can cause
electric shock or malfunction.
Do not let liquids get into the unit. This can cause electric
shock or malfunction. If this occurs, immediately disconnect
the unit from the power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They
contain flammable gases which can ignite if sprayed into
the unit.
Service
Do not attempt to repair this unit by yourself. If sound is
interrupted, indicators fail to light, smoke appears, or any
other problem that is not covered in these instructions
occurs, disconnect the AC mains lead and contact your
dealer or an authorized service center. Electric shock
or damage to the unit can occur if the unit is repaired,
disassembled or reconstructed by unqualified persons.
Extend operating life by disconnecting the unit from the
power source if it is not to be used for a long time.
RQT8043
RQTV0196-B.indd 4
2/23/07 4:48:40 PM
Handling of the disc trays and discs
DEUTSCH
Not doing the following will cause damage to the unit.
Removing the mains plug
• Press [y/I] to turn off the unit and remove the mains plug only after all the displays have disappeared.
Inserting a disc
• Always press [0, OPEN/CLOSE] to insert or remove a disc.
• Do not push or pull out the tray by hand as this will cause an
accident.
• Place the disc correctly label-up as shown in
the diagram.
• Insert one disc into the tray.
DANSK
Tray caution
Placement of speakers
For Europe
AK350 AK250
Use only the supplied speakers.
The combination of the main unit and speakers provide
the best sound. Using other speakers can damage the unit
and sound quality will be negatively affected.
Note:
FRANÇAIS
Speakers are designed identically so that no left or right
channel orientation is necessary.
• Keep your speakers at least 10mm away from the system for
proper ventilation.
• These speakers do not have magnetic shielding. Do not place
them near televisions, personal computers or other devices
easily influenced by magnetism.
• You can damage your speakers and shorten their useful life if
you play sound at high levels over extended periods.
• Reduce the volume in the following cases to avoid damage.
– When playing distorted sound.
– When adjusting the sound quality.
AK250
-
LANG - 4
Caution
• Use the speakers only with the recommended
system. Failure to do so can damage the amplifier
and speakers, and can cause fire. Consult a
qualified service person if damage occurs or if a
sudden change in performance is apparent.
• Do not attach these speakers to walls or ceilings.
For Australia and N.Z.
+
RQTV0196
LANG - 5
You cannot take the front net off the speakers.
5
RQT8043
RQTV0196-B.indd 5
2/23/07 4:48:41 PM
Getting started
Making the connections
ESPAÑOL
Connect the AC mains lead only after all other connections have been made.
Connect the speaker cords.
AK350
AK250
Connect the
left (L) side
in the same
way
Connect
the left (L)
side in the
same way
Red
Red (+)
Grey (+)
L
DANSK
R
Black (–)
Blue (–)
Black
Black (–)
Red (+)
Connect the FM indoor antenna.
Tape the antenna where reception is best.
FRANÇAIS
Adhesive
tape
(
)
(L)
(R)
LANG - 4
Connect the AM loop antenna.
To household mains socket
Stand the antenna
up on its base.
Connect the AC mains lead.
LANG - 5
FOR THE UNITED KINGDOM ONLY
READ THE CAUTION FOR AC MAINS LEAD ON
PAGE 4 BEFORE CONNECTION.
RQTV0196
Insertion of connector
Even when the connector is perfectly inserted, depending
on the type of inlet used, the front part of the connector
may jut out as shown in the drawing. However there is no
problem using the unit.
Appliance inlet
For your reference
To save power when the unit is not to be used for a long
time, unplug it from the household mains socket. You will
need to reset some memory items after plugging in the
unit.
Note:
The included AC mains lead is for use with this unit only.
Do not use it with other equipment.
Connector
6
RQT8043
RQTV0196-B.indd 6
2/26/07 9:32:44 AM
Optional antenna connections
DEUTSCH
Use outdoor antenna if radio reception is poor.
Note:
Disconnect the outdoor antenna when the unit is not in use. Do not use the outdoor antenna during a lightning storm.
FM outdoor antenna
AM outdoor antenna
Rear panel
of this unit
FM outdoor antenna
(not included)
(
AM outdoor antenna
(not included)
75 Ω coaxial cable
(not included)
)
Rear panel
of this unit
5-12 m
• Disconnect the FM indoor antenna.
• The antenna should be installed by a competent
technician.
DANSK
AM loop antenna
(included)
• Run a piece of vinyl wire horizontally across a window or
other convenient location.
• Leave the loop antenna connected.
Preparing the remote control
FRANÇAIS
LANG - 4
AA/R6/LR6
■ Batteries
• Insert so the poles (+ and –) match those in the remote control.
• Remove if the remote control is not going to be used for a long period of
time. Store in a cool, dark place.
• Replace if the unit does not respond to the remote control even when held
close to the front panel.
• Do not use rechargeable type batteries.
• Mishandling of batteries in the remote control can cause electrolyte
leakage, which may cause a fire.
• If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any part of
your body.
Do not:
• mix old and new batteries.
• use different types of batteries at the same time.
• heat or expose batteries to flame.
• take apart or short circuit the batteries.
• attempt to recharge alkaline or manganese batteries.
• use batteries if the covering has been peeled off.
• put heavy objects on the remote control.
• spill liquids onto the remote control.
■ Use
Aim at the remote control sensor, avoiding obstacles, at a maximum range
of 7 m directly in front of the unit.
Refer to page 8 for the remote control sensor position.
+
7, STOP, –DEMO
Note:
DEMO function cannot be turned on when Dimmer is on.
RQTV0196
-
When the unit is first plugged in, a demonstration of its functions may be
shown on the display.
If the demo setting is off, you can show a demonstration by selecting “DEMO
ON”.
Press and hold [7, STOP, –DEMO].
The display changes each time the button is held down.
NO DEMO (off) Ô DEMO ON (on)
While in standby mode, select “NO DEMO” to reduce power consumption.
LANG - 5
DEMO function
7
RQT8043
RQTV0196-B.indd 7
2/23/07 4:48:58 PM
Overview of controls
Main unit
ESPAÑOL
Refer to the numbers in parentheses for page reference.
Display panel
Remote control signal sensor
Disc trays
Disc tray open/close (5)
Disc direct play (9)
Multiple discs change (9)
Single disc change (10)
AC supply indicator [AC IN]
This indicator lights when the unit is connected
to the AC mains supply.
1 Standby/on switch [y/l] (5, 18)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit is
still consuming a small amount of power.
Headphone jack
Avoid listening for
prolonged periods of time
to prevent hearing damage.
Plug type: Ø 3.5 mm stereo
(not included)
Music port jack (15)
DANSK
For Australia and N.Z.
2 USB play/pause (16)
+
-
3 Music port selection (15)
For Australia and N.Z.
USB port (16)
9 Disc play/pause (9)
4 Tuner (FM/AM) selection(13)
5 Volume control
Record (12, 15 ~ 16)
6 Display (10, 13)
7 H.BASS selection (15)
FRANÇAIS
8 Track skip/search, tape
fast-forward/rewind, tune/
preset channel selection,
time adjustment
(9 ~ 14, 16)
! Tape play (12)
Cassette deck open (12)
Demonstration, stop (7, 12)
Cassette holder (12)
Remote control
Buttons such as 1 function the same as the controls on the main unit.
1
Play timer/record timer (14)
Sleep timer (14),
Auto off
Disc (9)
For Australia and N.Z.
Program (10, 13)
Clock/timer (14)
Numeric, characters
(9, 11, 13)
Play mode (9, 13)
LANG - 4
For Australia and N.Z.
MUSIC
3
PORT
REPEAT
9
Repeat (11)
Delete (10 ~ 11)
4
Stop/program clear
(9 ~ 10, 16)
!
CD
TUNER /
BAND
For Australia and N.Z.
2
MUSIC PORT
5
3
8
Disc album selection (9)
Enter (10 ~ 11)
ENTER
TITLE MANUAL
DISPLAY
EQ
SEARCH
LANG - 5
Title search (11)
DIMMER H.BASS
For Australia and N.Z.
DISPLAY
6
Dimmer
For Australia and N.Z.
PRESET
EQ
MUTING
6
Manual EQ (15)
Muting
Preset EQ (15)
To dim the display panel.
To mute the sound.
• Press the button to activate.
• Press again to cancel.
RQTV0196
7
This auto off function
allows you to turn off the unit in
disc, tape or USB mode only after
left unused for 10 minutes.
• Press and hold [–AUTO OFF] to
activate the function.
• Press and hold [–AUTO OFF]
again to cancel.
• The setting is maintained even if
the unit is turned off.
8
RQT8043
RQTV0196-B.indd 8
2/23/07 4:49:01 PM
Discs
1
2
3
4
5
You can listen to specific discs and tracks.
Preparation
Select and play your desired disc.
Press [PLAY MODE] to select the desired mode.
Mode
To play
1-DISC
one selected disc.
1 DISC
ALL-DISC
ALL DISC
all loaded discs in succession from the
selected disc to the final disc.
Example: 4→5→1→2→3.
1-TRACK
one selected track on the selected disc.
Current disc indicator
To
Action
stop play
Press [7, CLEAR] during play.
1-TR
Press the numeric buttons to select the
track in the current disc.
Play starts from the selected track.
Display when in the stop mode:
Example: “MP3” indicates the disc contains MP3
files.
Total number Total number
of albums
of tracks
pause play
Press [6, CD] during play.
Press again to resume play.
skip album
Press [ALBUM (
or
)] to select the
album.
Press [4, / REW] or [¢, / FF],
then the numeric buttons to select the
track in the current album.
Play starts from the selected track.
1-ALBUM
1-ALB
one selected album on the selected disc.
or
)] to select the
Press [ALBUM (
album.
1-DISC RANDOM
Press [ALBUM (
or
)] to select the desired
album during play or when in stop mode.
Display when selecting in stop mode (example):
DANSK
2
Press [0, OPEN/CLOSE] on the main unit to open
the tray.
The unit turns on, load a disc in the current tray with the
label facing up.
Press [0, OPEN/CLOSE] to close the tray.
Press [6, CD] to start play.
You can also press [DISC] and then [1] ~ [5] to select
and play the other loaded discs.
FRANÇAIS
1
DEUTSCH
Play Mode function
Basic play
one selected disc randomly.
1 DISC RND
1- ALBUM RANDOM
1-ALB RND
all tracks in one selected album
randomly.
or
)] to select the
Press [ALBUM (
album.
Current album
ALL-DISC RANDOM
all loaded discs randomly.
ALL DISC RND
Press [4, / REW] or [¢, / FF].
• During random play (\ see right, “Play Mode
function”), you cannot skip to tracks which have
been played.
During 1-ALBUM and 1-ALBUM RANDOM mode,
track skipping can only be done within the current
album.
Press and hold [4, / REW] or [¢, / FF]
during play or pause to search.
• During program play (\ page 10), or random
play (\ see right, “Play Mode function”), you can
search only within the track.
You cannot use program mode together with “Play Mode function”.
Changing multiple discs (MULTI CHANGE)
By main unit only
1
2
Press [0, MULTI CHANGE] to open the trays.
Press the button repeatedly to check and change
multiple discs.
Note:
• The tray with a disc being played will not open.
• If the player is stopped, all trays will open. To close the remaining
trays simultaneously, press [0, OPEN/CLOSE].
RQTV0196
search
through
tracks
LANG - 4
skip tracks
When playback ends
The current play mode will be retained in memory until it is
changed even if the unit is turned off.
Note:
LANG - 5
Number of tracks
in current album
• This function does not work during 1-DISC
RANDOM and ALL-DISC RANDOM mode.
9
RQT8043
RQTV0196-B.indd 9
2/23/07 4:49:07 PM
Discs (continued)
Changing a single disc (SINGLE CHANGE)
ESPAÑOL
By main unit only
While one disc is playing, you can change the discs in other
trays.
1
2
3
4
Press [0, SINGLE CHANGE].
Press [3,1] ~ [3, 5] to select the desired tray.
Change the disc.
Press [0, SINGLE CHANGE] again to close the tray.
Checking the track information
5
6
You can select a desired disc display mode.
Press [DISPLAY] during play or pause.
DANSK
1
2
3
4
7
Press [DISC] and then [1] ~ [5] to select the disc.
Press [7, CLEAR].
Press [PROGRAM].
Press [ALBUM ( or )] to select your desired
album.
To select an album directly, press the numeric
buttons after pressing [ALBUM ( or )].
Press [4, / REW] or [¢, / FF] to select the
track.
To select a track directly, press the numeric buttons
after pressing [4, / REW] or [¢, / FF].
Press [ENTER].
Repeat steps 4 to 6 to program other tracks.
Press [6, CD] to start play.
For two-digit track, press [h10] once then the two digits.
For three-digit track, press [h10] twice then the three digits.
Elapsed play time
Elapsed
play time
Remaining play time
➞
Album Name
➞
Tag (Track)
Tag (Album)
➞
➞
Tag (Artist)
➞
➞
➞
Remaining
play time
Track Name
Note:
To
Action
cancel
program mode
Press [PROGRAM] in the stop mode.
replay the
program
Press [PROGRAM] then [6, CD] in the stop
mode.
add to the
program
FRANÇAIS
• When track number 25 or greater is playing, remaining play time
display shows “– –:– –”.
Repeat steps 4 to 6 in the stop mode.
check program
contents
LANG - 4
• When a title is longer than 9 characters, it will scroll across the
display. The scrolling will start after every 3 seconds.
• “NO TAG” is displayed if titles with tags have not been entered.
• Maximum number of displayable characters: approximately 32
• This unit can display album, track and artist name with MP3 ID3
tags (version 1.0 and 1.1).
• Titles containing text data that the unit does not support cannot
be displayed.
• ID3 is a tag embedded in MP3 track to provide information about
the track.
• Titles entered with 2-byte code cannot be displayed correctly on
this unit.
Advanced play
Program play
This function allows you to program up to 24 tracks.
Repeat steps 3 to 4 in the stop mode.
Press [4, / REW] or [¢, / FF] when
“PGM” is displayed in the stop mode.
The track number, program order and disc
number are displayed:
Track number
1
Program order
2
3
4
5
The program order is displayed followed by the
album number and track number.
clear the last
track
Press [DEL] in the stop mode.
clear all
programmed
tracks
Press [7, CLEAR] in the stop mode. “CLEAR
ALL” is displayed. Within 5 seconds, press the
button again to clear all tracks.
Note:
• You cannot program CD-DA together with MP3 tracks.
1
2
LANG - 5
3
4
Press [PROGRAM].
“PGM” appears.
Press [DISC] and then [1] ~ [5] to select the disc.
• The program memory is cleared when you change a disc or open
the disc tray.
• You cannot program more than one disc.
Press the numeric buttons to select your desired
track.
Repeat steps 3 to 4 to program other tracks.
Press [6, CD] to start play.
RQTV0196
5
Press [6, CD] and then [7, CLEAR].
10
RQT8043
RQTV0196-B.indd 10
2/23/07 4:49:14 PM
You can repeat program play or other selected play mode.
Press [REPEAT].
” is displayed.
“
To cancel
Press [REPEAT] again.
” is cleared.
“
Note:
Blinks to indicate album title search mode
Matched album title
You can use repeat mode with “Program play” (\ page 10) and
“Play Mode function” ( \ page 9).
Advanced function (
Press [ENTER].
Press [4, / REW] or [¢, / FF] to search for
previous or next match.
The matched title is displayed.
Album title search
DEUTSCH
4
Repeat play
Track title search
Matched track title
only)
Album /Track title search
Numbered
Button
h10
Characters
space ! ” # $ % & ’ ( ) ∗ + , – . / : ; = ? _ `
• You can search for “<” or “>” by entering “(” or “)”.
• The special characters will be displayed as below:
Characters
Main unit
display
Characters
!
,
”
–
#
.
$
/
%
:
&
;
’
=
(
?
)
_
∗
`
Main unit
display
+
DANSK
Press [6, CD] to start play from the album/track
found.
Note:
This function does not work during any random/program mode.
NOTE on CDs
• This unit can access up to 99 tracks.
• Choose disc with this mark.
• This unit can play MP3 files and CD-DA format audio
CD-R/RW that have been finalized.
• It may not be able to play some CD-R/RW due to the condition of
the recording.
• Do not use irregularly shaped disc.
• Do not use disc with labels and stickers that are coming off or
with adhesive exuding from under labels and stickers.
• Do not attach extra labels or stickers on the disc.
• Do not write anything on the disc.
FRANÇAIS
3
For album title search, press [TITLE SEARCH] once.
For track title search, press [TITLE SEARCH] twice.
Press the numeric buttons repeatedly to select
your desired character then press [¢, / FF] to
key in the next character.
• You can enter up to 8 characters.
• To edit, press [4, / REW] or [¢, / FF] to revise any
characters.
• To delete, move the cursor over the character and
then press [DEL].
5
Using DualDiscs
The “CD” sides of DualDiscs do not meet the CD-DA standard so it
may not be possible to play them on this unit.
NOTE on MP3
• Files are treated as tracks and folders are treated as albums.
• This unit can access up to 999 tracks, 255 albums and 20
sessions.
• Disc must conform to ISO9660 level 1 or 2 (except for extended
formats).
• To play in a certain order, prefix the folder and file names with
3-digits numbers in the order you want to play them.
LANG - 4
1
2
Press [6, CD] and then [7, CLEAR].
Blinks to indicate track title search mode
When “NOT MP3/ERROR1” appears on the display, an
unsupported MP3 format is being played. The unit will skip that
track and play the next one.
Limitations on MP3 play
• If you have recorded MP3 on the same disc as CD-DA, only the
format recorded in the first session can be played.
• Some MP3s may not be played due to the condition of the disc or
recording.
• Recordings will not necessarily be played in the order you
recorded them.
LANG - 5
This function enables you to search your desired album or
track.
RQTV0196
• Some characters may not be displayed correctly due
to the recording format/software used.
11
RQT8043
RQTV0196-B.indd 11
2/23/07 4:49:18 PM
Cassette tape – Play and record
ESPAÑOL
The buttons described for “Cassette tape – Play and
record” are mainly for the main unit unless indicated
otherwise.
2
TAPE
Basic play
Use normal position tapes.
High position and metal position tapes can be played, but
the unit will not be able to identify the characteristics of
these tapes.
1
DANSK
2
3
To
record
programmed
tracks
Press [3, TAPE].
The unit turns on.
If a cassette was loaded, play starts automatically (One
touch play).
Press [0, OPEN] and insert the cassette.
Insert with the side to be played facing towards you
and the exposed tape facing down. Close the holder by
hand.
Press [3, TAPE] to start play.
To
Action
stop tape playback
Press [7, STOP].
fast-forward and
rewind
Press [ , REW / 4] or [ , FF / ¢ ].
Action
Perform steps 2 to 4 in “Program play”
(\ page 10).
Perform steps 3 to 6 in “Program play”
(\ page 10).
By remote control only
record
specific
discs/tracks
1) Press [DISC] and then [1] ~ [5] to select
the disc.
Ensure disc is stopped.
2) Press [PLAY MODE] to select the desired
mode (\ page 9).
3)
For 1-ALBUM mode and 1-TRACK mode:
or
)] to select the
Press [ALBUM (
album.
For 1-TRACK mode:
Press [4, / REW] or [¢,
select the track.
3
FRANÇAIS
Select the source to be recorded.
Radio recording:
Tune in the station .(\ page 13)
Disc recording:
➀ Insert the disc(s) you want to record.
Press [6, CD] and then [7, STOP].
➁ Prepare the desired disc recording mode.
/ FF] to
Press [¶, REC] to start recording.
Other basic operations
Note:
• Tapes exceeding 100 minutes are thin and can break or get
caught in the mechanism.
• Tape slack can get caught up in the mechanism and should be
wound up before the tape is played.
To
Action
stop recording
Press [7, STOP].
record on the other
side of the tape
Turn the cassette over and press [¶, REC].
erase a recorded
sound
1) Press [3, TAPE] and then [7, STOP].
2) Insert the recorded cassette.
3) Press [¶, REC].
TPS (Tape Program Sensor)
LANG - 4
This function enables you to search the beginning of up to
a maximum of 9 tracks.
Press [ , REW / 4] or [ , FF / ¢] during play.
Play resumes from the track found.
Note:
TPS may not operate correctly in the following situations:
• If the interval between tracks is less than 4 seconds.
• If there is noise between tracks.
• If there are silent parts within tracks.
Recording
LANG - 5
Selection of tapes for recording
Use normal position tapes.
High position and metal position tapes can be used, but
this unit will not be able to record or erase them correctly.
Preparation
Wind up the source tape so recording can begin
immediately.
Press [0, OPEN] and insert the cassette to be
recorded.
Insert with the side to be recorded facing towards you
and the exposed tape facing down.
RQTV0196
1
12
Your attention is drawn to the fact that recording prerecorded tapes or discs or other published or broadcast
material may infringe copyright laws.
Note:
Changes to volume and sound adjustments quality do not affect
recording.
Erasure prevention
The illustration shows how to remove the tabs to prevent
recording. To record on the tape again, cover as shown.
Side A
Tab for side B
Tab for side A
To re-record
Normal cassette
Adhesive tape
RQT8043
RQTV0196-B.indd 12
2/23/07 4:49:23 PM
FM/AM radio
Press [TUNER / BAND] to select “FM” or “AM”.
20 FM and 15 AM stations can be preset.
Press [PLAY MODE] to select “MANUAL”.
Preparation
Press [TUNER / BAND] to select “FM” or “AM”.
To tune automatically
Press and hold [4, / REW] or [¢, / FF] until the
frequency starts changing rapidly. The unit begins auto
tuning, stopping when it finds a station.
• Auto tuning may be interrupted when there is excessive
interference.
• To cancel auto tuning, press [4, / REW] or
[¢, / FF] once again.
To improve FM sound quality
Automatic presetting
1
2
RDS broadcasting (For Europe)
This unit can display the text data transmitted by the radio
data system (RDS) available in some areas.
If the station you are listening to is transmitting RDS
signals, “RDS” will light up on the display.
Press [DISPLAY] to display:
Station name ➞ Program Type ➞ Frequency display
(PS)
(PTY)
Program type displays
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
M-O-R- M
LIGHT M
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL A
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
Press and hold [PROGRAM] to start presetting.
The tuner presets all the stations it can receive into the
channels in ascending order. When finished, the last station
memorized is tuned in.
Press and hold [PLAY MODE] to display “MONO”.
To cancel
Press and hold [PLAY MODE] again until “MONO”
disappears.
• MONO is also cancelled if the frequency is changed.
• Turn off “MONO” for normal listening.
Tune to the frequency where presetting is to begin.
DANSK
Press [4, / REW] or [¢, / FF] to select the
frequency of the required station.
“ ” is displayed when a stereo FM broadcast is being
received.
DEUTSCH
Memory preset
Manual presetting
1
2
3
4
Press [PLAY MODE] to select “MANUAL”.
Press [4, / REW] or [¢,
required station.
Press [PROGRAM].
/ FF] to tune to the
FRANÇAIS
1
2
3
TUNER /
BAND
Manual tuning
Press the numeric buttons to select a channel.
For channels 10 to 20 press [h10], then the two digits.
The station occupying a channel is erased if another
station is preset to that channel.
Selecting a preset station
Press the numeric buttons to select the channel.
OR
COUNTRY
NATIONAL
OLDIES
FOLK M
DOCUMENT
TEST
ALARM
1
2
LANG - 4
TUNER /
BAND
Press [PLAY MODE] to select “PRESET”.
Press [4,
channel.
/ REW] or [¢,
/ FF] to select the
M-O-R- M = “Middle-of-the-Road music”
Note:
RQTV0196
LANG - 5
RDS displays may not be available if reception is poor.
13
RQT8043
RQTV0196-B.indd 13
2/23/07 4:49:27 PM
Timer
To activate the timer
[ ˚PLAY/REC] repeatedly to turn on your desired
5 Press
timer.
˚ PLAY ➞ ˚ REC
ESPAÑOL
Setting the clock
This is a 24-hour clock.
1
Press [CLOCK / TIMER] to select “CLOCK”.
Each time you press the button:
CLOCK
˚ REC
˚ PLAY
no display (off)
6
Press [y] to turn off the unit.
The unit must be off for the timers to operate.
Original display
2
3
Other basic operations
( Within 8 seconds or so )
Press [4, / REW] or [¢, / FF] to set the time.
Press [CLOCK / TIMER] to finish setting the time.
DANSK
Displaying the clock
Press [CLOCK / TIMER] once when the unit is on or in standby
mode.
The time is displayed for a few seconds.
Note:
Reset the clock regularly to maintain accuracy.
Using the play or record timer
You can set the timer to come on at a certain time to wake
you up (play timer) or to record from the radio or the external
equipment (record timer).
Play timer and record timer cannot be used together.
FRANÇAIS
Turn the unit on and set the clock.
Timer
Action
Play timer
Prepare the music source you want to listen to;
cassette, disc number (1 ~ 5), radio or other
external equipments, and set the volume.
Record
timer
Check the cassette’s erasure prevention tabs
(\ page 12), insert the cassette and tune to the
radio station (\ page 13) or select the external
equipment (\ page 15 ~ 16).
LANG - 4
1
To
Action
change the
settings
Repeat steps 1 to 4 and 6 (\ see left and
above).
change the
source or
volume
1) Press [ ˚PLAY/REC] to clear the timer
indicator from the display.
2) Make changes to the source or volume.
3) Perform steps 5 to 6 (\ see above).
check the
settings
Press [CLOCK/TIMER] repeatedly to select
˚PLAY or ˚REC.
cancel
Press [ ˚PLAY/REC] to clear the timer
indicators from the display.
If you use the unit after the timers are set
After using, check that the correct tape/disc are loaded
before turning the unit off.
Note:
• The play timer will start at the preset time with volume increasing
gradually to preset level.
• The record timer will start 30 seconds before the set time with the
volume muted.
• The timer comes on at the set time every day if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while a timer is functioning,
the finish time setting will not be activated.
• If MUSIC PORT is selected as the source when the timer comes
on, the system turns on and engages MUSIC PORT as the
source. If you wish to playback or record from the portable audio
equipment, just activate the equipment’s play mode and increase
the volume. (See the portable audio equipment’s instruction
manual.)
Press [CLOCK/TIMER] to select the timer function.
Each time you press the button:
CLOCK ➞ ˚ PLAY ➞ ˚ REC
Using the sleep timer
Original display
2
˚PLAY : to set the play timer
˚REC : to set the record timer
(Proceed to the next step within 8 seconds )
Press [4, / REW ] or [¢, / FF] to set the
starting time.
This function enables you to turn off the unit automatically
after the set time.
Press [SLEEP] to select your desired time.
SLEEP 30
SLEEP 60
SLEEP OFF
Start time
SLEEP 90
SLEEP 120
1
Play timer indicator
LANG - 5
3
4
Record timer indicator
Press [CLOCK / TIMER] to confirm.
Repeat steps 2 to 3 to set the finishing time.
Finish time
Sleep timer indicator
To cancel
Press [SLEEP] to select “SLEEP OFF”.
Changing the remaining time
Press [SLEEP] to show the remaining time and press
[SLEEP] again to select your desired time.
Note:
RQTV0196
1
• The play and sleep timer or the record and sleep timer can be
used together.
• The sleep timer always has priority. Be sure not to overlap timer
settings.
• The sleep timer turns off when you perform the record function.
14
RQT8043
RQTV0196-B.indd 14
2/23/07 4:49:32 PM
Sound adjustment
External unit
Selecting sound effects
Connecting to a portable audio equipment
Press [PRESET EQ] repeatedly to select your desired
setting.
HEAVY ➞ SOFT ➞ CLEAR ➞ VOCAL ➞ DISCO
➞
HEAVY
Adds punch to rock
All peripheral components and cables are sold separately.
LIVE
Portable audio equipment
(not included)
SOFT
For background music
CLEAR
Clarifies higher frequencies
VOCAL
Adds gloss to vocal
DISCO
Produces sound with the same kind of lengthy
reverberations heard at a disco
LIVE
Makes vocals more alive
HALL
Adds an expansiveness to the sound to produce
the atmosphere of a great concert hall
FLAT
No effect
-
MUSIC PORT
Manual EQ
Press [MANUAL EQ] repeatedly to select your desired
setting.
BASS ➞ MID ➞ TREBLE
Setting
Effect
BASS
For lower pitch sound
MID
For middle pitch sound
TREBLE
For higher pitch sound
2
Press [4,
level.
/ REW ] or [¢,
DANSK
Audio cord
(not included)
MANUAL
1
+
Playing from a portable audio
equipment
Switch off the equalizer function (if there is any) of the portable
audio equipment before you plug into the MUSIC PORT jack.
Otherwise, sound from the speaker may be distorted.
the audio cord into the MUSIC PORT jack and
1 Plug
press [MUSIC PORT].
the portable audio equipment. (See the portable
2 Play
audio equipment’s instruction manual.)
FRANÇAIS
HALL
Effect
➞
FLAT (off)
Setting
This feature enables you to enjoy music from a portable
audio equipment.
Note:
DEUTSCH
Preset EQ
Recording from a portable audio
equipment
/ FF] to adjust the
Note:
1
2
3
Press [MUSIC PORT].
Play the portable audio equipment.
Press [¶, REC] on the main unit to start recording.
LANG - 4
• The level of the pitch is between -3 to +3.
• The changes you make are stored and automatically recalled the
next time you select “MANUAL EQ”.
Enhancing the bass sound
LANG - 5
You can enhance low-frequency sound so that heavy bass
sound can be heard clearly, even if the acoustics of your
room are not optimal.
To activate
Press [H.BASS].
To cancel
Press [H.BASS] again.
Note:
RQTV0196
The actual effect depends on the disc.
15
RQT8043
RQTV0196-B.indd 15
2/23/07 4:49:34 PM
External unit (continued)
Note:
2
+
-
Action
pause play
USB
Press [6, USB].
Press again to resume play.
stop play
Press [7, CLEAR].
“RESUME” is displayed. The position is
memorized.
Press [6, USB] to resume.
Press [7, CLEAR] again to clear the position.
skip tracks
Press [4,
skip album
Press [ALBUM (
or
)] in the play mode.
or
)] once and then
Press [ALBUM (
the numeric buttons in the stop mode.
/ REW] or [¢,
/ FF].
For other operating functions, they are similar as those
described in “Discs” (\ page 9 ~ 11).
Recording from a USB mass
storage class device
1
• CBI (Control/Bulk/Interrupt) is not supported.
• A device using NTFS file system is not supported [Only FAT 16/32
(File Allocation Table 16/32) file system is supported].
• Depending on the sector size, some files may not work.
• This unit can access up to 255 albums (including blank folders)
and 2500 tracks.
• The maximum number of tracks in a folder are 999 tracks.
• Only one memory card will be selected when connecting a
multiport USB card reader. Typically the first memory card
inserted.
• Disconnect the USB card reader from the unit when you remove
the memory card. Failure to do so may cause malfunction to the
device.
• When you connect your digital audio player to the USB port,
it charges all the time except in standby mode or during tape
recording.
Press [4, / REW ] or [¢, / FF] to select the
desired track for recording.
Press [¶, REC] on the main unit to start recording.
Changing the main unit and
remote control mode
The remote control and main unit are factory-set to
“REMOTE 1” mode.
If your remote control affects other equipment during
operation, you can switch to operate in “REMOTE 2” mode.
To switch to “REMOTE 2” mode
pressing and holding [MUSIC PORT] on the main
1 While
unit
Press and hold [2] until “REMOTE 2” appears on
the main unit display.
and hold [ENTER] and [2] for at least 2
2 Press
seconds.
The main unit and remote control are now set to
operate in “REMOTE 2” mode.
To return to “REMOTE 1” mode
Perform steps 1 and 2 above but use [1] instead of [2] for
both steps. (“REMOTE 1” appears on the main unit during
step 1.)
The remote control cannot work with the main unit if
their modes are different.
“REMOTE 1” or “REMOTE 2” appears on the main unit
display when you operate the remote control.*
*
If “REMOTE 1” appears (The main unit is in “REMOTE 1”
mode.)
Press and hold [ENTER] and [1] on the remote control for
at least 2 seconds.
If “REMOTE 2” appears (The main unit is in “REMOTE 2”
mode.)
Press and hold [ENTER] and [2] on the remote control for
at least 2 seconds.
RQTV0196
2
Files must have the extension “.mp3” or “.MP3”.
MUSIC PORT
Reduce the volume and connect the USB mass storage
device.
Press [6, USB] to start play.
To
LANG - 5
Devices which are defined as USB mass storage class:
• USB devices that support bulk only transfer.
• USB devices that support USB 2.0 full speed.
Preparation
Before connecting any USB mass storage device to the unit,
ensure that the data stored therein has been backed up.
It is not recommended to use a USB extension cable. The
USB device is not recognised by this unit.
1
FRANÇAIS
AK250
Supported format
USB enabled device
(not included)
It is not recommended
to use a USB extension
cable. The device
connected via the cable
will not be recognised by
this unit.
LANG - 4
Compatible devices
The USB connectivity enables you to connect and play
MP3 tracks from USB mass storage class. Typically, USB
memory devices. (Bulk only transfer)
DANSK
ESPAÑOL
Connecting and playing a USB mass
storage class device For Australia and N.Z.
16
RQT8043
RQTV0196-B.indd 16
2/23/07 4:49:38 PM
Troubleshooting guide
DEUTSCH
Before requesting service, make the checks below. If you can’t fix the system as described below, or if something
not listed here occurs, refer to the enclosed directory to locate an Authorized Service Center convenient to you or
contact your dealer.
Reference pages are shown as black circled numbers 4.
Although the unit is in standby
mode, the display lights up and
changes continuously.
Turn off the demo function. 7
If you set the clock, demo function will be turned off automatically. %
No sound.
Sound stops.
Turn the volume up.
Switch off the unit, determine and correct the cause, then switch the unit on.
Causes include straining of the speakers through excessive volume or power,
and using the unit in a hot environment.
Sound is unfixed, reversed or
comes from one speaker only.
Check the speaker connections. 6
Humming heard during play.
An AC mains lead or fluorescent light is near the cables. Keep other appliances
and cords away from this unit’s cables.
“ERROR” is displayed.
Incorrect operation performed. Read the instructions and try again.
“– –:– –” appears on the display at
standby mode.
You plugged the AC mains lead in for the first time or there was a power failure
recently.
Set the time. %
“F61” is displayed.
Check and correct the speaker cords connection. 6
If this does not fix the problem, there is a power supply problem. Consult the
dealer.
DANSK
Common problems
Noise is heard.
The stereo indicator flickers or
doesn’t light.
Sound is distorted.
Use an outdoor antenna. 7
A beat sound is heard.
Turn the TV off or separate it from the unit.
A low hum is heard during AM
broadcast.
Separate the antenna from other cables and cords.
FRANÇAIS
Listening to the radio
When there is a television set nearby
The location and orientation of the antenna are incorrect. If you are using an
indoor antenna, change to an outdoor antenna.
The TV antenna wire is too close to the unit. Separate the antenna wire of the TV
set from the unit.
LANG - 4
The picture on the TV disappears
or stripes appear on the screen.
Using the cassette deck
Poor sound quality.
Clean the heads. ~
Recording is not possible.
If the erasure prevention tabs have been removed, cover the holes with adhesive
tape. #
Playing discs
The disc may be upside down. 5
Wipe the disc.
Replace the disc if it is scratched, warped, or non-standard.
Condensation may have formed inside the unit due to a sudden change in
temperature. Wait for about an hour for it to clear and try again.
The total number of tracks
displayed differs each time the
same disc is inserted.
Unusual sound is heard.
The disc may be scratched, or its data may be defective. Replace the disc.
CD-RW cannot be read.
The disc was incompletely formatted. Use the recording equipment to fully
format the disc before recording.
“VBR–” is displayed instead of the
remaining play time.
The unit cannot display the remaining play time for variable bit rate (VBR) tracks.
RQTV0196
LANG - 5
The display is wrong or play won’t
start.
17
RQT8043
RQTV0196-B.indd 17
2/23/07 4:49:42 PM
Troubleshooting guide (continued)
Disc trays
ESPAÑOL
Disc tray(s) cannot open.
“CHGR ERR” is displayed.
Press [y/I] to release the jammed tray(s) as the unit will switch off. Switch it on
again and the tray(s) will initialize to the previous tray(s) condition.
If this still does not fix the problem, please consult the dealer.
Remote control
Remote control doesn’t work.
Check that the batteries are inserted correctly. 7
Replace the batteries if they are worn.
DANSK
USB
No response when [¶, REC] button
is pressed.
Disconnect the USB device and then reconnect it back. Alternatively, turn the
unit off and then back on.
The USB drive or its contents
cannot be read.
The USB drive format or its contents is/are not campatible with the system. (
The USB host function of this product may not work with some USB devices.
USB devices with storage capacity of more than 8 gigabytes may not work in
some instances.
Slow operation of the USB flash
drive.
Large file size or high memory USB flash drive takes longer time to read.
“USB OVER CURRENT ERROR”
The USB mass storage device rating exceeds 500mA. Disconnect the USB
device. Turn the unit off and then back on.
“NO PLAY”
Check the content.
Only MP3 format files can be played.
LANG - 4
FRANÇAIS
Memory reset (Initialization)
When the following situations occur, refer to the instructions below to reset the memory:
• There is no response when buttons are pressed.
• You want to clear and reset the memory contents.
To reset memory
1 Disconnect the AC mains lead. (Wait at least 3 minutes before proceeding to step 2)
2 While pressing and holding down [y/I] on the main unit, reconnect the AC mains lead.
“– – – – – – – – –” appears on the display.
3 Release [y/I].
All the settings are returned to the factory preset.
You will need to reset the memory items.
LANG - 5
Maintenance
If the surfaces are dirty
For a cleaner crisper sound (cassette deck)
To clean this unit, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this
unit.
• Before using chemically treated cloth, read the
instructions that came with the cloth carefully.
Clean the heads regularly to assure good quality playback
and recording. Use a cleaning tape (not included).
RQTV0196
When moving the unit
1
2
3
Remove all discs.
Press [y/I] to turn the unit off.
Disconnect the AC mains lead.
18
RQT8043
RQTV0196-B.indd 18
2/23/07 4:49:42 PM
Specifications
For Europe
THD 10%, both channels driven
1 kHz
Total output power
50 W per channel (3 Ω)
100 W
For Australia and N.Z.
THD 10%, both channels driven
1 kHz
Total output power
115 W per channel (3 Ω)
230 W
FM/AM TUNER, TERMINALS SECTION
Preset station
Frequency Modulation (FM)
Frequency range
Sensitivity
S/N 26 dB
Antenna terminal(s)
Amplitude Modulation (AM)
Frequency range
Sensitivity
S/N 20 dB (at 999 kHz)
Music Port input jack
Terminal
Sensitivity
Phone jack
Terminal
FM 20 stations
AM 15 stations
87.50 to 108.00 MHz (50 kHz step)
4.0 µV (IHF)
2.2 µV
75 Ω (unbalanced)
522 to 1629 kHz (9 kHz step)
560 µV/m
Stereo, 3.5 mm jack
100 mV, 4.7 kΩ
Stereo, 3.5 mm jack
CASSETTE DECK SECTION
Track system
4 track, 2 channel
Heads
Record/playback
Solid permalloy head
Erasure
Double gap ferrite head
Motor
DC servo motor
Recording system
AC bias 100 kHz
Erase system
AC erase 100 kHz
Tape speed
4.8 cm/s
Overall frequency response (+3 dB, –6 dB) at DECK OUT
NORMAL
35 Hz to 14 kHz
S/N Ratio
50 dB (A weighted)
Wow and flutter
0.18% (WRMS)
Fast forward and rewind time
Approx. 120 seconds with
C-60 cassette tape
SPEAKER SECTION
AK350
Type
2 way, 2 speaker system (Bass reflex)
Speaker(s)
Woofer
16 cm cone type
Tweeter
6 cm cone type
Impedance
HIGH
3Ω
LOW
3Ω
Input power (IEC)
HIGH
75 W (Max)
LOW
75 W (Max)
Output sound pressure level
85 dB/W (1.0 m)
Cross over frequency
2.5 kHz
Frequency range
30 Hz to 28 kHz (–16 dB)
35 Hz to 29 kHz (–10 dB)
Dimensions (WxHxD)
219 x 330 x 196 mm
Mass
2.6 kg
SPEAKER SECTION
AK250
Type
2 way, 2 speaker system (Bass reflex)
Speaker(s)
Woofer
16 cm cone type
Tweeter
6 cm cone type
Impedance
3Ω
Input power (IEC)
50 W (Max)
Output sound pressure level
84 dB/W (1.0 m)
Cross over frequency
2 kHz
Frequency range
35 Hz to 30 kHz (–16 dB)
23 Hz to 34 kHz (–10 dB)
Dimensions (WxHxD)
219 x 330 x 196 mm
Mass
2.6 kg
GENERAL
Power supply
For Continental Europe
AC 230 V, 50 Hz
For the United Kingdom, Australia and N.Z.
AC 230 to 240 V, 50 Hz
DISC SECTION
Disc played [8 cm or 12 cm]
(1) CD-Audio (CD-DA)
(2) CD-R/RW (CD-DA, MP3 * formatted disc)
(3) MP3 *
*
MPEG-1 Layer 3, MPEG-2 Layer 3
Bit rate
MP3
32 kbps to 320 kbps
Sampling frequency
MP3
32 kHz, 44.1 kHz, 48 kHz
CD-DA
44.1 kHz
Decoding
16 bit linear
Digital filter
8 fs
D/A converter
MASH (1 bit DAC)
Pick up
Wavelength
780 nm
Beam Source
Semiconductor laser
(For Norge)
Bølgelengde
780 nm
Laserstyrke
Ingen farlig stråling sendes ut
Audio output (Disc)
Number of channels
2(Stereo) (FL, FR)
DEUTSCH
AK250
RMS Output power
DANSK
75 W per channel (3 Ω)
300 W
FRANÇAIS
75 W per channel (3 Ω)
AK250
Playable USB Storage Media
1) HDD (WITH FAT32 AND WITHOUT PARTITION)
2) USB MP3 Player/Digital Audio Player
3) USB Thumbdrives
Supported audio file format
MP3 bit rate
USB memory port
Maximum current
500 mA
Bit rate
MP3
32 kbps to 320 kbps
Sampling frequency
MP3
32 kHz, 44.1 kHz, 48 kHz
Audio output (MP3)
Number of channels
2 channels
Frequency response (MP3)
20 Hz to 20 kHz (0+/-1.0 dB)
S/N Ratio
USB unit out
85 dB
LANG - 4
AMPLIFIER SECTION
USB SECTION For Australia and N.Z.
Power consumption
For Continental Europe
AK350 : 90 W
AK250 : 70 W
For the United Kingdom, Australia and N.Z.
Dimensions (WxHxD)
Mass
Operating temperature range
Operating humidity range
90 W
250 x 330 x 323 mm
6.3 kg
+5 to +35 °C
5 to 90 % RH (no condensation)
Power consumption in standby mode:
LANG - 5
AK350
RMS Output power
THD 10%, both channels driven
1 kHz
(Low channel)
10 kHz
(High channel)
Total Bi-Amp power
0.5 W (approx.)
Note:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
3. AK350 The labels “HIGH” and “LOW” on the rear of the speakers
refer to High frequency and Low frequency.
RQTV0196
AMPLIFIER SECTION
19
RQT8043
RQTV0196-2B.indd 19
4/9/07 6:19:15 PM
Matsushita Electric Industrial Co., Ltd.
Web Site: http://panasonic.net
En
RQTV0196-2B
L0207TK2037
RQTV0196-2B.indd 20
3/27/07 3:23:19 PM
Download PDF

advertising