Panasonic | SCHC27DBEB | Operating instructions | Panasonic SCHC27DBEB Operating Instructions

Panasonic SCHC27DBEB Operating Instructions
Specifications
Caution for AC mains lead
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains
plug for your safety and convenience.
Operating Instructions
Compact Stereo System
Model No.
SC-HC27DB
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that
the replacement fuse has a rating of 5-ampere and that it is
approved by ASTA or BSI to BS1362.
or the BSI mark on the body
Check for the ASTA mark
of the fuse.
If the plug contains a removable fuse cover you must ensure
that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a
replacement cover is obtained.
A replacement fuse cover can be purchased from your local
dealer.
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR
THE SOCKET OUTLET IN YOUR HOME THEN THE
FUSE SHOULD BE REMOVED AND THE PLUG CUT
OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED INTO
ANY 13-AMPERE SOCKET.
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Please keep this manual for future reference.
WARNING: DO NOT CONNECT EITHER WIRE TO THE
EARTH TERMINAL WHICH IS MARKED WITH THE
OR COLOURED
LETTER E, BY THE EARTH SYMBOL
GREEN OR GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF—KEEP DRY.
1. Open the fuse cover with a screwdriver.
EU
Figure B
Fuse cover
Pursuant to at the directive 2004/108/EC, article 9(2)
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
Panasonic Corporation
Web Site: http://panasonic.net
EB
En
WARNING!
Unit
• To reduce the risk of fire, electric shock or product
damage,
– Do not expose this unit to rain, moisture, dripping or
splashing.
– Do not place objects filled with liquids, such as vases,
on this unit.
– Use only the recommended accessories.
– Do not remove covers.
– Do not repair this unit by yourself. Refer servicing to
qualified service personnel.
Battery
• Risk of fire, explosion and burns. Do not recharge,
disassemble, heat above 60°C or incinerate.
• Keep the button-type battery out of the reach of children.
Never put button-type battery in mouth. If swallowed call
your doctor.
CAUTION!
HC27DB_EB1_en.indd 1
Unit
• To reduce the risk of fire, electric shock or product
damage,
– Do not install or place this unit in a bookcase, built-in
cabinet or in another confined space. Ensure this unit is
well ventilated.
– Do not obstruct this unit’s ventilation openings with
newspapers, tablecloths, curtains, and similar items.
– Do not place sources of naked flames, such as lighted
candles, on this unit.
• This unit is intended for use in moderate climates.
• Install this unit so that the AC mains lead can be
unplugged from the socket outlet immediately if any
problem occurs.
• This unit may receive radio interference caused by mobile
telephones during use. If such interference occurs, please
increase separation between this unit and the mobile
telephone.
• This unit utilizes a laser. Use of controls or adjustments
or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Battery
• Danger of explosion if battery is incorrectly replaced.
Replace only with the type recommended by the
manufacturer.
• When disposing the batteries, please contact your local
authorities or dealer and ask for the correct method of
disposal.
• Do not heat or expose to flame.
• Do not leave the battery(ies) in a car exposed to direct
sunlight for a long period of time with doors and windows
closed.
Supplied accessories
These symbols on the products, packaging,
and/or accompanying documents mean that
used electrical and electronic products and
batteries should not be mixed with general
household waste.
For proper treatment, recovery and recycling
of old products and used batteries, please
take them to applicable collection points, in
accordance with your national legislation and
the Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries
correctly, you will help to save valuable
resources and prevent any potential
negative effects on human health and the
environment which could otherwise arise
from inappropriate waste handling.
For more information about collection and
recycling of old products and batteries,
please contact your local municipality, your
waste disposal service or the point of sale
where you purchased the items.
For business users in the European Union
If you wish to discard electrical and electronic
equipment, please contact your dealer or
supplier for further information.
[Information on Disposal in other
Countries outside the European Union]
These symbols are only valid in the
European Union. If you wish to discard these
items, please contact your local authorities
or dealer and ask for the correct method of
disposal.
Note for the battery symbol (bottom two
symbol examples):
This symbol might be used in combination
with a chemical symbol. In this case it
complies with the requirement set by the
Directive for the chemical involved.
Customer Communications Centre
1 x DAB antenna
(RFA3425)
I Decrease the brightness of the display panel
• Press the button again to cancel.
USB
J Adjust the volume of the system
K Mute the sound of the system
Preset station
FM 30 stations
Frequency modulation (FM)
Frequency range
87.50 MHz to 108.00 MHz (50 kHz step)
Antenna terminals
75 (unbalanced)
SETUP
• Press the button again to cancel.
• “MUTE” is also cancelled when you adjust the volume
or when you switch off the system.
MUTE
L View the play menu
iPod MENU SOUND PLAY MENU
DISPLAY
View the radio options
M USB port (
OK
DAB memories
20 channels
Frequency band (wavelength)
Band III (UK only)
10B to 12D (211.648 MHz to 229.072 MHz)
Band III (Europe)
5A to 13F (174.928 MHz to 239.200 MHz)
Sensitivity BER 4x10-2
Min requirement
–98 dBm
DAB external antenna
Terminal
F - Connector (75 )
ALBUM
• Press to switch the unit from on to standby mode
or vice versa. In standby mode, the unit is still
consuming a small amount of power.
Top view
B Select audio source
M
Terminals section
USB port
USB standard
Media file format support
USB device file system
USB port power
iPod connector
Headphones jack
Terminal
S
N
• Plug type: Ø 3.5 mm stereo (not supplied)
• Avoid listening for prolonged periods of time to prevent
hearing damage.
• Excessive sound pressure from earphones and
headphones can cause hearing loss.
• Listening at full volume for long periods may damage
the user’s ears.
O Open or close the sliding door
P Sliding door
C Basic playback control
Q Remote control sensor
• Maximum range: 7 m directly in front
D View the clock and timer options
USB 2.0 full speed
MP3 (*.mp3)
FAT12, FAT16, FAT32
DC OUT 5 V, 500 mA MAX
DC OUT 5 V, 1.0 A MAX
)
N Headphones jack ( )
A Standby/on switch [`], [1]
R Display panel
E View the iPod menu
View information
S Open or close the dock for iPod/iPhone
F Select the sound effects
G Select the option
A
Stereo, 3.5 mm jack
B
C
CD, CD-R/RW (CD-DA, MP3 )
Pick up
Wavelength
790 nm (CD)
Laser power
CLASS 1
Audio output (Disc)
Number of channels
2 ch (FL, FR)
FL = Front left channel
FR = Front right channel
MPEG-1 Layer 3, MPEG-2 Layer 3
J
Skip album
O
Getting started
Preparing the remote control
Before using
Speaker section
Type
Speaker unit(s)
Full range
Impedance
1 way, 1 speaker system (bass reflex)
8 cm cone type x 1/ch
6
General
Power supply
Power consumption
Dimensions (W x H x D)
AC 220 to 240 V, 50 Hz
19 W
400 mm x 213 mm x 110 mm
[D = 72 mm (min)]
[D = 144 mm (tray open)]
Mass
2 kg
Operating temperature range
0°C to +40°C
Operating humidity range
35% to 80% RH (no condensation)
Insulation sheet
1
Note:
• Specifications are subject to change without notice.
Mass and dimensions are approximate.
• Total harmonic distortion is measured by the digital
spectrum analyzer.
• Most major credit and debit cards accepted.
• All enquiries transactions and distribution facilities are
provided directly by Panasonic UK.
• It couldn’t be simpler!
• Also available through our Internet is direct shopping for
a wide range of finished products. Take a browse on our
website for further details.
Connect the AC mains lead.
READ THE “Caution for AC mains lead” BEFORE
CONNECTION.
Power consumption in standby mode: 0.2 W
(approximate)
Do not use an AC mains lead from other equipment.
Replacing the battery
Replace with a new battery (CR2025 lithium battery).
1
While pressing the stopper, pull out the battery
holder.
2
3
Insert a new battery with the (+) side facing up.
Push the battery holder back fully.
CR2025
Tapes
Be sure to fully
tighten the nut.
To household mains socket
Use DAB outdoor antenna for better reception.
DAB outdoor antenna
(not supplied)
Direct Sales at Panasonic UK
• Order accessory and consumable items for your
product with ease and confidence by phoning our
Customer Communications Centre Monday – Thursday
9:00 a.m. – 5:30 p.m., Friday 9:30 a.m. – 5:30 p.m.
(Excluding public holidays).
• Or go on line through our Internet Accessory ordering
application at www.pas-europe.com.
2
Connect the DAB antenna.
Place the antenna where reception is best.
Sales and Support Information
• For customers within the UK: 0844 844 3899
• For customers within Ireland: 01 289 8333
• For further support on your product, please visit our
website: www.panasonic.co.uk
H Set the sleep timer
RADIO/
CD
Power consumption in standby mode
0.2 W (approximate)
Penalties may be applicable for incorrect
disposal of this waste, in accordance with
national legislation.
Use numbers indicated in parentheses when asking
for replacement parts. (Product numbers correct as of
January 2012. These may be subject to change.)
1 x Remote control
(with a battery)
(N2QAYC000059)
R
Disc section
Check and identify the supplied accessories.
1 x AC mains lead
(K2CZ3YY00024)
Q
Disc played (8 cm or 12 cm)
Information for Users on Collection and Disposal of Old Equipment and used Batteries
Safety precautions
Product Identification Marking is located on the bottom
of the unit.
Fuse (5 ampere)
Fuse (5 ampere)
L0112HH1052
Do the procedures with the remote control. You can also use the buttons on the main unit if they are the same.
Your system and the illustrations can look differently.
Inside of product
Figure B
RQT9571-1B
© Panasonic Corporation 2012
Bottom of product
2. Replace the fuse and close or attach the fuse cover.
Figure A
P
SLEEP DIMMER
DAB section
If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in accordance with
the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured
markings identifying the terminals in your plug, proceed as
follows:
The wire which is coloured Blue must be connected to the
terminal which is marked with the letter N or coloured Black
or Blue.
The wire which is coloured Brown must be connected to the
terminal which is marked with the letter L or coloured Brown
or Red.
Front view
Tuner section
How to replace the fuse
The location of the fuse differ according to the type of AC
mains plug (figures A and B). Confirm the AC mains plug
fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
If a new plug is to be fitted please observe the wiring code
as stated below.
Note:
“EB” on the packaging indicates the United Kingdom.
Amplifier section
RMS output power stereo mode
Front Ch (both ch driven)
5 W per channel (6 ), 1 kHz, 10% THD
Total RMS stereo mode power
10 W
iPod
Before use
Remove the connector cover.
Figure A
Overview of controls
Note:
• Some settings return to default when you disconnect the
system.
• These speakers do not have magnetic shielding. Do
not put them near TVs, PCs or other equipment easily
influenced by magnetism.
• You cannot remove the net of the speakers.
Be sure to fully
tighten the nut.
5/14/2012 4:17:08 PM
iPod/iPhone, Disc, USB
Clock and timers
USB
Inserting or removing media
iPod/iPhone
iPod/iPhone
USB device
(not supplied)
Push [iPod x] to open the dock tray.
iPod/iPhone
(not supplied)
Dock adapter
(not supplied)
Note:
Do not use a USB extension cable. The system cannot
recognise USB device connected through a cable.
Connector
View iPod menu
Press [iPod MENU].
Select an item
Press [R, T] and then press [OK].
Note:
• Depending on the model, it may be necessary to remove
the iPod/iPhone and select the album, artist, etc. on the
iPod/iPhone.
• Operation results may vary depending on the iPod/iPhone
models.
• Read the User Guide of the iPod/iPhone for the operating
instructions.
Disc, USB
Skip album
Note:
• Make sure to remove the iPod/iPhone from its case.
• Make sure to align your iPod/iPhone with the connector
when inserting.
• Use a compatible dock adapter.
• If a dock adapter is not available, insert and remove the
iPod/iPhone with care.
Basic playback
Click!
CD
Play
Press [4/9].
Stop
Press [8].
USB :
The track is memorised.
“RESUME” is shown.
Press two times to stop fully.
Pause
CD
USB
View information
Press [DISPLAY].
Note:
• Maximum characters that can be shown: approximately 32
• This system supports ver. 1.0, 1.1 and 2.3 ID3 tags.
• Text data that the system does not support can show
differently.
Press [4/9].
Press again to continue playback.
Skip track
Press [2/3] or [5/6].
Search through
track
Press and hold [2/3] or
[5/6].
Play menu
CD
USB
1
Press [PLAY MENU] to select “PLAYMODE” or
“REPEAT”.
2
Press [R, T] and then press [OK] to select the
desired mode.
Compatible media
iPod/iPhone (as of January 2012)
Update your iPod/iPhone with the latest software before
using this system.
PLAYMODE
iPod touch
1st, 2nd, 3rd and 4th generation
OFF
PLAYMODE
Play all tracks.
iPod nano
2nd, 3rd, 4th, 5th and 6th generation
1-TRACK
Play one selected track.
Press [2/3] or [5/6] to select
the track.
iPod classic
1
1
Play one selected album.
Press [R, T] to select the album.
RANDOM
Play all tracks randomly.
1-ALBUM
RANDOM
Play all tracks in one selected album
randomly.
Press [R, T] to select the album.
1-ALBUM
Press [R, T].
USB
Press [iPod], [CD] or [USB] to select the source.
Disc
Press [CD x OPEN/CLOSE] on the main unit to open the
sliding door.
Put in a disc with the label facing towards you.
iPod
iPod
RND
1
RND
iPhone 4S / iPhone 4 / iPhone 3GS / iPhone 3G /
iPhone
Charging an iPod/iPhone
An iPod/iPhone is charged automatically when connected to
the system (even when the system is in standby mode).
• See the iPod/iPhone display for its battery charging status.
• Disconnect the iPod/iPhone if it is not used for an
extended period of time after charging is complete.
• Charging stops when the battery is fully charged. The
battery will deplete naturally.
Disc
REPEAT
ON REPEAT
Repeat playback.
OFF REPEAT
Cancel repeat playback.
Note:
• During random playback, you cannot skip to tracks which
have been played.
• The setting returns to default when you open the sliding
door.
• This system can play CD-R/RW with CD-DA or MP3
format content.
• Some CD-R/RW cannot be played because of the
condition of the recording.
• MP3 files are defined as tracks and folders are defined as
albums.
• This system can access up to:
– CD-DA : 99 tracks
– MP3
: 999 tracks, 255 albums (including root folder)
and 20 sessions
• Disc must conform to ISO9660 level 1 or 2 (except for
extended formats).
• Recordings will not necessarily be played in the order you
recorded them.
USB
• Compatible USB devices which are defined as mass
storage class:
– USB devices that support bulk-only transfer
– USB devices that support USB 2.0 full speed
• Files are defined as tracks and folders are defined as
albums.
• Track must have the extension “.mp3” or “.MP3”.
• This system can access up to:
– 255 albums (including root folder)
– 2500 tracks
– 999 tracks in one album
• CBI (Control/Bulk/Interrupt) is not supported.
• NTFS file system is not supported (only FAT 12/16/32 file
system is supported).
• Some files can fail to work because of the sector size.
Setting the clock
This is a 24-hour clock.
1
2
3
Sound effects
Check the
settings
1. Press [SETUP] to select “TIMER ADJ”.
2. Press [OK].
Cancel
1. Press [SETUP] to select “TIMER SET”.
2. Press [R, T] to select “OFF” and then
press [OK].
Press [SETUP] to select “CLOCK”.
Press [R, T] to set the time.
Press [OK].
To show the clock for a few seconds
Press [SETUP] to select “CLOCK” and then press [OK].
Note:
Reset the clock regularly to maintain accuracy.
Note:
• The timer starts at a low volume and increases gradually
to the preset level.
• The timer comes on at the set time every day if the timer
is on.
• If you switch off the system and switch on again while a
timer is in operation, the timer will not stop at the end time.
Sleep timer
Play timer
You can set the timer to come on at a certain time to wake
you up.
The sleep timer switches off the system after the set time.
Apple is not responsible for the operation of this device or
its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod, or
iPhone may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other
countries.
1
2
3
4
Press [SETUP] to select “TIMER ADJ”.
Press [R, T] to set the start time.
Press [OK].
Do steps 2 and 3 again to set the end time.
Prepare the audio source you want to listen to and
set the volume.
2
3
Press [SETUP] to select “TIMER SET”.
Press [R, T] to select “SET” and then press [OK].
“#” is shown.
The system must be switched off for the timer to
operate.
MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.
Press [R, T] to select the desired setting.
“HEAVY” : Adds punch to rock.
“SOFT” : For background music.
“CLEAR” : Clarifies higher frequencies.
“VOCAL” : Adds gloss to vocal.
“FLAT” : Cancels the sound effect.
BASS
“BASS -4” to “BASS +4”.
TREBLE
“TREBLE-4” to “TREBLE+4”.
D.BASS
“ON D.BASS” or “OFF D.BASS”.
SURROUND
“ON SURROUND” or
“OFF SURROUND”.
SLEEP 30 → SLEEP 60 → SLEEP 90 → SLEEP120
OFF
Note:
• The remaining time is always shown on the display.
The display changes temporarily when you perform other
operations.
• The sleep timer can be used together with the play timer.
• The sleep timer always comes first. Be sure not to set an
overlap of timers.
To start the timer
1
Press [SOUND] to select a sound effect.
PRESET EQ
Press [SLEEP] to select the setting (in minutes).
To cancel, select “OFF”.
Preparation
Set the clock.
“Made for iPod” and “Made for iPhone” mean that an
electronic accessory has been designed to connect
specifically to iPod, or iPhone, respectively, and has been
certified by the developer to meet Apple performance
standards.
1
2
Auto off function
iPod
CD
USB
This function switches off the system (except in radio
source) if you do not use the system for approximately
30 minutes.
1
2
Maintenance
To clean this system, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this
system.
• Before using chemically treated cloth, read the instructions
that came with the cloth carefully.
Press [SETUP] to select “AUTO OFF”.
Press [R, T] to select “ON” or “OFF” and then press
[OK].
Note:
Keep fingers away from the sliding door when it is closing.
Radio
30 FM stations can be preset.
Preparation
Connect the DAB antenna (Z “Getting started”).
Press [RADIO] to select “FM”.
Automatic presetting
1
2
3
Press [PLAY MENU] to select “A.PRESET”.
Press [R, T] to select “LOWEST” or “CURRENT”
frequency.
LOWEST
: To begin auto preset from the lowest
frequency.
CURRENT : To begin auto preset from the current
frequency .
To change the frequency, refer to “Manual tuning and
presetting”.
Press [OK] to start presetting.
The tuner presets all the stations it can receive into the
channels in ascending order.
To cancel, press [8].
Manual tuning and presetting
1
2
3
Note:
A station previously stored is overwritten when another
station is stored in the same preset number.
Selecting a preset station
1
2
3
Press [PLAY MENU] to select “TUNEMODE”.
Press [R, T] to select “PRESET” and then press
[OK].
Press [2/3] or [5/6] to select the preset
station.
1
2
Press [R, T] to select “MANUAL” and then press
[OK].
Press [2/3] or [5/6] to tune in to the
station.
To tune automatically, press and hold the button until the
frequency starts changing quickly.
“STEREO” is shown when the system is tuned in to a
stereo broadcast.
Press [OK].
Press [R, T] to select a preset number.
Press [OK].
Do steps 3 through 6 again to preset more stations.
HC27DB_EB1_en.indd 2
To preset the station
Preparation
Connect the DAB antenna (Z “Getting started”).
4
5
6
Press [RADIO] to select “DAB/DAB+”.
If you select “DAB/DAB+” for the first time, the system will
start the “DAB AUTO SCAN” procedure.
DAB auto scan
1
Press [PLAY MENU] to select “AUTOSCAN” and
then press [OK].
“START?” is shown.
2
Press [OK].
“DAB AUTO SCAN” is shown.
If no station is detected, “SCAN FAILED” is shown. Do
manual tuning (Z below).
Press [PLAY MENU] to select “FM MODE”.
Press [R, T] to select “MONO” and then press [OK].
To cancel, select “STEREO”.
“MONO” is also cancelled when you change the
frequency.
To memorise the setting
Continue with steps 4 through 6 of “Manual tuning and
presetting”.
Checking the signal status
Press [DISPLAY] .
FM
DAB manual tuning
To find the best antenna position, use manual tuning to
search selected DAB frequency block.
Preparation
Select the desired “SCANMODE” (Z “DAB settings”).
1
2
Press [PLAY MENU] to select “TUNEMODE”.
3
4
Press [R, T] to select a frequency block to scan.
The FM signal is in monaural.
The system is not tuned in to a station.
FM ST
The FM signal is in stereo.
FM MONO
“MONO” is selected as the “FM MODE”.
Troubleshooting
This system support DAB in “BAND III” bands.
Improving the sound quality
Press [PLAY MENU] to select “TUNEMODE”.
To preset the station
4
5
6
DAB/DAB+
Press [R, T] to select “MANUAL” and then press
[OK].
Press [OK].
If no station is detected, “SCAN FAILED” is shown.
Adjust the antenna and try again.
Memory presetting
20 channels can be preset.
1
2
Press [PLAY MENU] to select “TUNEMODE”.
3
Press [2/3] or [5/6] to tune in to the
station.
Press [R, T] to select “STATION” and then press
[OK].
DAB settings
Press [OK].
Press [R, T] to select a preset number.
Press [OK].
Do steps 3 through 6 again to preset more stations.
Note:
• A station previously stored is overwritten when another
station is stored in the same preset number.
• All previously stored stations are cleared during auto scan.
• You cannot preset a station when the station is not
broadcasting or when you have selected a secondary
service.
1
2
Press [PLAY MENU] to select an option.
Press [R, T] to select the desired setting and then
press [OK].
TUNEMODE
STATION
For station frequency tuning.
PRESET
For preset channel tuning.
MANUAL
Refer to “DAB manual tuning”.
DAB SECONDARY
Selecting a preset station
PRIMARY
To listen to primary service.
To listen to secondary services.
“ ” is shown.
1
2
Press [PLAY MENU] to select “TUNEMODE”.
01 SECONDARY
Press [R, T] to select “PRESET” and then press
[OK].
02 SECONDARY
3
Press [2/3] or [5/6] to select the preset
station.
AUTO CLOCK ADJ
DAB signal quality
Start auto clock adjustment.
OFF ADJUST
Cancel auto clock adjustment.
SCANMODE
When adjusting the antenna, you can check the reception
quality.
1
2
3
ON ADJUST
Press [PLAY MENU] to select “SIGNAL QUALITY”.
Press [OK] to see the current frequency.
UNITED
KINGDOM
Scan stations on frequencies used
in the United Kingdom.
ALL BAND III
Scan stations on other frequencies.
Viewing available information
Press [DISPLAY].
Frequency
Reception quality
0 (poor) to 8 (excellent)
Common problems
No operations can be done with the remote control.
• Examine that the battery is installed correctly.
• The remote control and this unit are using different codes
(Z right, “REMOTE ”).
Sound is distorted or no sound.
• Adjust the volume of the system.
• Examine the volume of the iPod/iPhone.
• Switch off the system, determine and correct the cause,
then switch the system on again. It can be caused by
straining of the speakers through excessive volume or
power, and when using the system in a hot environment.
A “humming” sound can be heard during playback.
• An AC mains lead or fluorescent light is near the cable.
Keep other appliances and cords away from the cable of
this system.
iPod/iPhone
You cannot switch on the iPod/iPhone.
• Examine that the battery of the iPod/iPhone is not
depleted.
• Switch off the iPod/iPhone and the system before you
connect the iPod/iPhone. Connect the iPod/iPhone and
try again.
iPod/iPhone does not charge.
• Examine the connection.
Disc
Press [R, T] to select frequency.
Frequency
block
Before requesting service, make the following checks. If
you are in doubt about some of the check points, or if the
solutions indicated do not solve the problem, consult your
dealer for instructions.
You can view information about the DAB broadcast, program
type, ensemble label, frequency and time.
Display not shown correctly.
Playback does not start.
• You did not put the disc in correctly. Put it in correctly.
• Disc is dirty. Clean the disc.
• Replace the disc if it is scratched, warped, or
non-standard.
• There is condensation. Let the system dry for 1 to 2 hours.
USB
The USB device or the contents in it cannot be read.
• The format of the USB device or the contents in it is/are
not compatible with the system.
• USB devices with storage capacity of more than 32 GB
cannot work in some conditions.
Slow operation of the USB device.
• Large content size or large memory USB device takes
longer time to read.
The elapsed time shown is different from the actual play
time.
• Transfer the data to another USB device or backup the
data and reformat the USB device.
Radio, DAB/DAB+
Reception is poor or a beat sound is heard.
• Keep the antenna away from computers, TVs, other
cables and cords.
• Use an outdoor antenna.
• Move mobile telephones away from the unit if the
interference is apparent.
Main unit displays
“--:--”
• You connected the AC mains lead for the first time or there
was a power failure recently. Set the clock.
“ADJUST CLOCK”
• Clock is not set. Adjust the clock accordingly.
“ADJUST TIMER”
• Play timer is not set. Adjust the play timer accordingly.
“DATA”
• Data broadcast being received over the DAB broadcast
signal cannot be used on this system.
“ERROR”
• An incorrect operation was done. Read the instructions
and try again.
“F61”
• There is a power supply problem.
“IPOD OVER CURRENT ERROR” or
“USB OVER CURRENT ERROR”
• The iPod/iPhone or USB device is drawing too much
power. Remove the iPod/iPhone or USB device. Switch
the system off and on again.
“NODEVICE”
• The iPod/iPhone or USB device is not connected.
Examine the connection.
“NO DISC”
• You have not put in a disc.
“NO MEMORY”
• DAB memory presetting has not been done.
“NO PLAY”
• You have put in a disc that the system cannot play.
• You have inserted a USB device that cannot be played.
Examine the content. You can only play supported format.
• If there are more than 255 albums or folders (audio
and non-audio), some of the MP3 files in these albums
cannot be read and played. Transfer these music albums
to another USB device. Alternatively, reformat the USB
device and save these music albums prior to saving the
other non-audio folders.
“SCAN FAILED”
• Stations are not receivable. Check your antenna and try
DAB manual tuning.
“SCRAMBLED”
• The broadcast station being received cannot be accessed.
“–VBR–”
• The system cannot show the remaining play time for
variable bit rate (VBR) tracks.
Memory reset (initialisation)
Reset the memory when the following situations occur:
• There is no response when buttons are pressed.
• You want to clear and reset the memory contents.
1
Disconnect the AC mains lead.
Wait 3 minutes before you continue with step 2.
2
While you press and hold [1] on the main unit,
connect the AC mains lead again.
“– – – – – – – –” is shown.
3
Release [1].
All the settings are set back to the factory preset.
It is necessary to set the memory items again.
“NO SERVICE”
• The station is currently not broadcasting.
“NO SIGNAL”
• This station cannot be received. Check your antenna.
“NOT MP3/ERROR”
• An unsupported MP3 format. The system will skip that
track and play the next one.
“NOT SUPPORTED”
• You have inserted an iPod/iPhone that cannot be played.
• If the iPod/iPhone is compatible, remove the iPod/iPhone
and connect it again. Examine that the battery of the iPod/
iPhone is not depleted.
“REMOTE ” (“  ” stands for a number.)
• The remote control and this unit are using different codes.
Change the code of the remote control.
– When “REMOTE 1” is shown, press and hold [OK] and
[T] for a minimum of 4 seconds.
– When “REMOTE 2” is shown, press and hold [OK] and
[R] for a minimum of 4 seconds.
Remote control code
When other Panasonic equipment responds to the remote
control of this system, change the remote control code for
this system.
To set the code to “REMOTE 2”
1
Press and hold [CD] on the main unit and [R] on
the remote control until “REMOTE 2” is shown.
2
Press and hold [OK] and [R] for a minimum of
4 seconds.
To set the code to “REMOTE 1”
1
Press and hold [CD] on the main unit and [T] on
the remote control until “REMOTE 1” is shown.
2
Press and hold [OK] and [T] for a minimum of
4 seconds.
5/14/2012 4:17:15 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising