Panasonic SCHTB385EB, SCHTB385EG Operating instructions

Panasonic SCHTB385EB, SCHTB385EG Operating instructions
SC-HTB385_EGEB_RQT0B25-B.book
1 ページ
2016年3月29日 火曜日 午前9時33分
Operating Instructions
Home Theater Audio System
Model No. SC-HTB385
Thank you for purchasing this product.
Please read these instructions carefully before using this product,
and save this manual for future use.
Included Installation Instructions
The installation work should be done by a qualified installation specialist. (> 10 to 15)
Before commencing work, carefully read these installation instructions and the operating instructions
to ensure that installation is performed correctly.
(Please keep these instructions. You may need them when maintaining or moving this system.)
Model number suffix “EB” denotes UK model.
EG
EB
RQT0B25-B
2016/04/22
SC-HTB385_EGEB_RQT0B25-B.book
2 ページ
2016年3月29日 火曜日 午前9時33分
Safety precautions
WARNING
CAUTION
Unit
Unit
≥ To reduce the risk of fire, electric shock or
product damage,
jDo not expose this unit to rain, moisture,
dripping or splashing.
jDo not place objects filled with liquids, such as
vases, on this unit.
jUse only the recommended accessories.
jDo not remove covers.
jDo not repair this unit by yourself. Refer
servicing to qualified service personnel.
≥ To prevent injury, this apparatus must be
securely attached to the wall in accordance with
the installation instructions.
≥ Do not place sources of naked flames, such as
lighted candles, on this unit.
≥ This unit may receive radio interference caused
by mobile telephones during use. If such
interference occurs, please increase separation
between this unit and the mobile telephone.
≥ This unit is intended for use in moderate
climates.
≥ Product Identification Marking is located on the
bottom of the unit.
AC mains lead
≥ To reduce the risk of fire, electric shock or
product damage,
jEnsure that the power supply voltage
corresponds to the voltage printed on this unit.
jInsert the mains plug fully into the socket outlet.
jDo not pull, bend, or place heavy items on the
lead.
jDo not handle the plug with wet hands.
jHold onto the mains plug body when
disconnecting the plug.
jDo not use a damaged mains plug or socket
outlet.
≥ The mains plug is the disconnecting device.
Install this unit so that the mains plug can be
unplugged from the socket outlet immediately.
Button-type battery (Lithium battery)
≥ Risk of fire, explosion and burns. Do not
recharge, disassemble, heat above 60 oC or
incinerate.
≥ Keep the Button-Type battery out of the reach of
children. Never put Button-Type battery in
mouth. If swallowed call your doctor.
Small object
≥ Keep the screws out of reach of children to
prevent swallowing.
≥ Keep the button-type battery out of reach of
children to prevent swallowing.
≥ Keep the optical digital audio cable cap out of
reach of children to prevent swallowing.
2
RQT0B25
Placement
≥ Place this unit on an even surface.
≥ To reduce the risk of fire, electric shock or
product damage,
jDo not install or place this unit in a bookcase,
built-in cabinet or in another confined space.
Ensure this unit is well ventilated.
jDo not obstruct this unit’s ventilation openings
with newspapers, tablecloths, curtains, and
similar items.
jDo not expose this unit to direct sunlight, high
temperatures, high humidity, and excessive
vibration.
Button-type battery (Lithium battery)
≥ Danger of explosion if battery is incorrectly
replaced. Replace only with the type
recommended by the manufacturer.
≥ Insert with poles aligned.
≥ Mishandling of batteries can cause electrolyte
leakage and may cause a fire.
jRemove the battery if you do not intend to use
the remote control for a long period of time.
Store in a cool, dark place.
jDo not heat or expose to flame.
jDo not leave the battery(ies) in a car exposed
to direct sunlight for a long period of time with
doors and windows closed.
≥ When disposing of the batteries, please contact
your local authorities or dealer and ask for the
correct method of disposal.
SC-HTB385_EGEB_RQT0B25-B.book
3 ページ
2016年3月29日 火曜日 午前9時33分
(For the AC mains plug of three pins)
For your safety, please read the following text
carefully.
This appliance is supplied with a moulded three
pin mains plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please
ensure that the replacement fuse has a rating of 5ampere and that it is approved by ASTA or BSI to
BS1362.
Check for the ASTA mark Ï or the BSI mark Ì on
the body of the fuse.
If the plug contains a removable fuse cover you
must ensure that it is refitted when the fuse is
replaced.
If you lose the fuse cover the plug must not be
used until a replacement cover is obtained.
A replacement fuse cover can be purchased from
your local dealer.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type
of AC mains plug (figures A and B). Confirm the
AC mains plug fitted and follow the instructions
below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
Figure B
Figure A
Fuse cover
2. Replace the fuse and close or attach the fuse cover.
Figure A
Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
RQT0B25
3
Precautions
Caution for AC Mains Lead
SC-HTB385_EGEB_RQT0B25-B.book
4 ページ
2016年3月29日 火曜日 午前9時33分
Table of contents
Safety precautions............................................................................................ 2
Caution for AC Mains Lead.............................................................................. 3
Before use
Supplied items .................................................................................................. 5
This system (SC-HTB385) ...................................................................................................5
Accessories .........................................................................................................................5
Control reference guide ................................................................................... 6
This system (Front) ..............................................................................................................6
This system (Rear) ..............................................................................................................7
Remote control ....................................................................................................................8
Getting started
Step 1 Connections ......................................................................................... 9
Connection with the TV .......................................................................................................9
AC mains lead connection ...................................................................................................9
Step 2 Placement ........................................................................................... 10
Safety Precautions ............................................................................................................10
The active subwoofer ........................................................................................................10
Wireless interference .........................................................................................................10
Selecting the placement method .......................................................................................11
When placing the main unit in a rack or on a table ............................................................12
When attaching the main unit to a wall ..............................................................................13
Step 3 Wireless connections ........................................................................ 16
Active subwoofer wireless connection ...............................................................................16
Bluetooth® connection .......................................................................................................16
Remote control code ......................................................................................17
Operations
Using this system ...........................................................................................18
3D sound .........................................................................................................19
Sound menu ....................................................................................................19
Audio format ......................................................................................................................20
Setup menu .....................................................................................................21
Reference
Troubleshooting .............................................................................................22
About Bluetooth® ............................................................................................25
Unit care ..........................................................................................................25
Licenses ..........................................................................................................25
Specifications ................................................................................................. 26
4
RQT0B25
SC-HTB385_EGEB_RQT0B25-B.book
5 ページ
2016年3月29日 火曜日 午前9時33分
Before use
≥ The illustrations shown may differ from your unit.
≥ Operations in this operating instructions are described mainly with the remote control, but
you can perform the operations on the main unit if the controls are the same.
Supplied items
∏ 1 Active subwoofer
(SB-HWA385)
Before use
∏ 1 Main unit (speaker)
(SU-HTB385)
Precautions
This system (SC-HTB385)
Accessories
Check the supplied accessories before using this system.
∏ 2 Wall mount brackets
(RMQ2281A, RMQ2281B)
∏ 2 Screws
(XYN5+J14FJK)
Getting started
∏ 1 Remote control (with a
battery)
(N2QAYC000109)
∏ 1 Optical digital audio cable ≥ Remove the cap before using the cable.
Attach the cap If you are not using the cable.
For Continental Europe only
(K7CXJYA00001)
For Continental Europe
(K2CQ2YY00119)
Reference
∏ 2 AC mains leads
For the United Kingdom
and Ireland
(K2CT2YY00097)
Operations
Cap
≥ Product numbers are correct as of March 2016. These may be subject to change.
≥ The supplied AC mains lead is for use with this system only.
Do not use it with other equipment. Also, do not use cords from other equipment with this system.
RQT0B25
5
SC-HTB385_EGEB_RQT0B25-B.book
6 ページ
2016年3月29日 火曜日 午前9時33分
Control reference guide
This system (Front)
1
2
3 4
Main unit
5
6
7
Active subwoofer
1
Standby/on switch (Í/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
Adjust the volume of this system (> 18)
Select the input source (> 18)
“TV” (-# “BLUETOOTH”
2
3
6
RQT0B25
4
5
6
7
Select the Bluetooth® device as the source
(> 18)
Remote control signal sensor (> 8)
Display
WIRELESS LINK indicator (> 16)
SC-HTB385_EGEB_RQT0B25-B.book
7 ページ
2016年3月29日 火曜日 午前9時33分
This system (Rear)
Main unit
2
3
Before use
1
4
3
Active subwoofer
1
2
OPTICAL DIGITAL AUDIO IN (TV) terminal
(> 9)
USB port (for service use only)
3
4
AC IN terminal (> 9)
Active subwoofer on/off button (> 16)
§ The I/D SET button is only used when the main unit is not paired with the active subwoofer. (> 24)
RQT0B25
7
SC-HTB385_EGEB_RQT0B25-B.book
8 ページ
2016年3月29日 火曜日 午前9時33分
Remote control
∫ Before using for the first time
Remove the insulation sheet A.
1
5
2
INPUT
6
3
4
SETUP
MUSIC
7

1
2
SOUND
OK
8

Turn the main unit on or off (> 18)
Select the input source (> 18)
“TV” (-# “BLUETOOTH”
Select the setup menu (> 21)
Select the sound menu (> 19)
Select the Bluetooth® device as the source
(> 18)
Adjust the volume of this system (> 18)
Mute the sound (> 18)
Select and confirm the option
3
4
5
6
7
8
∫ To replace a button-type battery
Battery type: CR2025 (Lithium battery)


≥ Set the button-type battery with its (i) mark
facing upward.
∫ About remote control signal sensor
The remote control signal sensor is located on the main unit.
≥Use the remote control within the correct operation range.
Distance: Within approx. 7 m directly in front
Angle: Approx. 30o left and right
For table top layout
For wall mounting layout

B Remote control signal sensor for table top layout
C Remote control signal sensor for wall mounting layout
8
RQT0B25

SC-HTB385_EGEB_RQT0B25-B.book
9 ページ
2016年3月29日 火曜日 午前9時33分
Step 1 Connections
Getting started
≥Turn off all equipment before connection and read the appropriate operating instructions.
Do not connect the AC mains lead until all other connections are completed.
Connection with the TV
Before use
TV
OPTICAL
DIGITAL
AUDIO IN
TV
OPTICAL OUT
A
A Optical digital audio cable (supplied for Continental Europe only)
≥ When you use the optical digital audio cable, insert the tip correctly into the terminal.
Getting started
≥OPTICAL DIGITAL AUDIO IN (TV) terminal is compatible with PCM. Change “DIGITAL AUDIO
OUTPUT” setting to “PCM” on the TV. Read the operating instructions for the TV for details.
AC mains lead connection
≥ Connect only after all other connections are completed.


AC IN

B To a household mains socket
C AC mains lead (supplied)
≥This system consumes a small amount of AC power (> 26) even when it is turned off. In the interest of power
conservation, if you will not be using this system for a long time, unplug it from the household mains socket.
Saving energy
The main unit is designed to conserve its power consumption and save energy.
≥ The main unit will automatically switch to standby mode when no signal is input and no operation is
performed for approx. 20 minutes. Refer to page 21, “AUTO POWER DOWN” to turn this function off.
RQT0B25
9
SC-HTB385_EGEB_RQT0B25-B.book
10 ページ
2016年3月29日 火曜日 午前9時33分
Step 2 Placement
Safety Precautions
Professional installation is required.
The installation should never be done by any other than a qualified installation specialist.
PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND/OR SERIOUS INJURY, INCLUDING
DEATH RESULTING FROM IMPROPER INSTALLATION OR INCORRECT HANDLING.
≥ Be sure to install the main unit as indicated within this operating instructions.
≥ Attach using techniques suited to the structure and materials of the installation location.
Caution
≥ This system is to be used only as indicated in these instructions. Failure to do so may lead to
damage to the amplifier and/or the speaker, and may result in the risk of fire. Consult a qualified
service person if damage has occurred or if you experience a sudden change in performance.
≥ Do not attempt to attach the main unit to a wall using methods other than those described in this
manual.
≥ Do not hold the main unit in one hand to avoid injury, you may drop the main unit when carrying it.
≥ To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
The active subwoofer
When carrying the active subwoofer
A Do not hold the active subwoofer from this
opening.
The parts inside may get damaged.
B Always hold the bottom of the active subwoofer when
moving it.
A
B
Wireless interference
To avoid interference, maintain the following distances between the main unit/active subwoofer
and other electronic devices that use the same radio frequency (2.4 GHz band).
D
C
10
RQT0B25
C Main unit/active subwoofer
D Wireless router, cordless phone and
other electronic devices: approx. 2 m
SC-HTB385_EGEB_RQT0B25-B.book
11 ページ
2016年3月29日 火曜日 午前9時33分
Selecting the placement method
Choose a placement method that suits you best.
≥ Place the main unit on a flat
and horizontal surface.
Precautions
When placing the main unit
in a rack or on a table
Page 12
When attaching the main
unit to a wall
≥ Place the main unit on a
flat and vertical surface.
∫ When placing the main unit in front of the TV
The main unit may block or interfere with the TV’s various sensors (C.A.T.S. (Contrast Automatic
Tracking System) sensor, remote control sensor, etc.) and the 3D Eyewear transmitters on a 3D
compatible TV.
≥If interference occurs, move the main unit further away from the TV. If the TV still does not function
correctly, try using it in a rack or in the wall mount position.
∫ If the TV’s remote control sensor is blocked by the main unit
Try using the TV’s remote control from a different angle.
≥ Place the active subwoofer within a few meters of the main unit and in a horizontal position with the top panel facing upward.
≥ Do not use the main unit or the active subwoofer in a metal cabinet.
≥ Placing the active subwoofer too close to the walls and corners can result in excessive bass. Cover walls and windows with
thick curtains.
≥ If irregular colouring occurs on your TV, turn the TV off for about 30 minutes. If it persists, move the main unit and active
subwoofer further away from the TV.
≥ Keep magnetised items away. Magnetised cards, watches, etc., can be damaged if placed too close to the main unit and active
subwoofer.
RQT0B25
11
Getting started
Page 13
SC-HTB385_EGEB_RQT0B25-B.book
12 ページ
2016年3月29日 火曜日 午前9時33分
When placing the main unit in a rack or on a table
Additionally required accessories (commercially available)
≥Fall prevention cord ..................................................................................................................... k 2
≥Screw eyes (to attach the fall prevention cord)............................................................................. k 2
≥ Use commercially available screws that are capable of supporting over 26 kg.
≥ Use a cord that is capable of supporting over 26 kg (with a diameter of about 1.5 mm).
Attach the cord to the main unit.


A Cord§
§ If the cord cannot be threaded through the holes, try bending the cord in 2 locations,
about 5 mm apart from the tip, at an angle of 45o (as illustrated above).
Place the main unit in the desired position and attach each cord onto the
rack or table.
≥ Make sure that the slack of the cord is minimal.
≥ Do not lean the main unit against the TV or wall.

B Screw eye
≥Attach at a position capable of supporting over 26 kg.
≥Depending on the placement of the main unit, the screwing position of the screw eye may differ.
12
RQT0B25
SC-HTB385_EGEB_RQT0B25-B.book
13 ページ
2016年3月29日 火曜日 午前9時33分
When attaching the main unit to a wall
Precautions
The main unit can be wall mounted using the supplied wall mount brackets, etc. Make sure that the
screw used and the wall are strong enough to support the weight of at least 26 kg.
The screws and other items are not supplied as the type and size will vary with each installation.
≥Refer to step 3 for details about the required screws.
≥Be sure to attach the fall prevention cord as a secondary safety measure.
Supplied accessories
∏ 2 Screws
∏ 2 Wall mount brackets
Additionally required accessories (commercially available)
≥Screws for wall mounting ............................................................................................................. k 2
≥Fall prevention cord...................................................................................................................... k 2
≥Screw eyes (to attach the fall prevention cord) ............................................................................ k 2
≥ Use a cord that is capable of supporting over 26 kg (with a diameter of about 1.5 mm).
Attach the cord to the main unit.
Getting started


A Cord§
§ If the cord cannot be threaded through the holes, try bending the cord in 2 locations,
about 5 mm apart from the tip, at an angle of 45o (as illustrated above).
RQT0B25
13
SC-HTB385_EGEB_RQT0B25-B.book
14 ページ
2016年3月29日 火曜日 午前9時33分
Attach the wall mount brackets to the main unit.



A Wall mount bracket (supplied)
B Screw (supplied)
Drive a screw into the wall.
≥
≥
≥
≥
Use the measurements indicated below to identify the screwing positions on the wall.
Leave at least 100 mm of space above of the main unit to allow enough space for fitting the main unit.
Position the main unit with at least 50 mm of free space to its right. If not, it may not be possible to access the buttons.
Be sure to use a level to ensure that both mounting holes are level to each other.


C
D
E
F
G



At least 30 mm
‰4.0 mm
‰7.0 mm to ‰9.4 mm
Wall or pillar
1.6 mm to 2.5 mm
Front view (semi-transparent image)









H 400 mm
I 275 mm
J 275 mm
K 27 mm
L 110 mm
M Wall mounting hole
14
RQT0B25
SC-HTB385_EGEB_RQT0B25-B.book
15 ページ
2016年3月29日 火曜日 午前9時33分
Precautions
Fit the main unit securely onto the screw(s).
DO
DO NOT
≥ Move the speaker so
that the screw is in
this position.
≥ In this position, the
speaker will likely fall
if moved to the left or
right.
Secure the cord to the wall.
≥ Make sure that the slack of the cord is minimal.
Getting started


A Screw eye
B Cord
RQT0B25
15
SC-HTB385_EGEB_RQT0B25-B.book
16 ページ
2016年3月29日 火曜日 午前9時33分
Step 3 Wireless connections
Active subwoofer
wireless connection
Preparation
≥ Turn on the main unit.
Press [BÍ CI].
Bluetooth® connection
By using the Bluetooth® connection, you can listen
to the sound from the Bluetooth® audio device
from this system wirelessly.
≥ Refer to the operating instructions of the Bluetooth® device
for further instruction on how to connect a Bluetooth®
device.
Preparation
≥ Turn on the Bluetooth® feature of the device and
place the device near the main unit.
Bluetooth® pairing
Press [ ] to select “BLUETOOTH”.
≥ If “PAIRING” is indicated on the display, go to step 3.
Active subwoofer on/off button [B Í C I]
Use this button to turn the active subwoofer on
and off.
C I:
The active subwoofer is on.
B Í:
The active subwoofer is off.
The active subwoofer will still consume a small
amount of power even when it is turned off (B, Í).
Check that the wireless link is
activated.
WIRELESS LINK indicator
Lights red:
The wireless link is not activated.
Lights green:
The wireless link is activated.
Blinks green:
The active subwoofer is trying to activate the
wireless link with the main unit.
The wireless link will be activated when the main unit and the
active subwoofer are both turned on.
16
RQT0B25
Press and hold [ ] until “PAIRING”
is indicated on the display.
Select “SC-HTB385” from the
Bluetooth® device’s Bluetooth®
menu.
≥ If prompted for the passkey on the Bluetooth® device, enter “0000”.
≥ Once the Bluetooth® device is connected, the name of the
connected device will be indicated on the display for a few
seconds.
≥ You can register up to 8 devices with this system. If a 9th
device is paired, the device that has not been used for the
longest time will be replaced.
SC-HTB385_EGEB_RQT0B25-B.book
17 ページ
2016年3月29日 火曜日 午前9時33分
Connecting a paired
Bluetooth® device
Press [ ] to enter Bluetooth® mode.
When other Panasonic devices respond to this
system’s remote control, change the remote
control code on this system and the remote
control.
“BLUETOOTH READY” is indicated on the display.
Preparation
Select “SC-HTB385” from the
Bluetooth® device’s Bluetooth®
menu.
≥ Turn off all other Panasonic products.
≥ Turn on the main unit.
Press and hold [ ] until the “BLUETOOTH
READY” is indicated on the display.
≥ When “BLUETOOTH” is selected as the source, this
system will automatically try and connect to the last
connected Bluetooth® device.
≥ The Bluetooth® device will be disconnected if a different
audio source (e.g. “TV”) is selected.
≥ This system can only be connected to one device at a time.
≥ To change the sound quality, refer to page 21 “LINK MODE”.
∫ To set the code to “REMOTE 2”
Press and hold [MUTE] and [OK] for more than
4 sec.
“REMOTE 2” is indicated on the display.
∫ To set the code to “REMOTE 1”
Press and hold [MUTE] and [4] for more than
4 sec.
“REMOTE 1” is indicated on the display.
Getting started
∫ Disconnecting a Bluetooth® device
Remote control code
RQT0B25
17
SC-HTB385_EGEB_RQT0B25-B.book
18 ページ
2016年3月29日 火曜日 午前9時33分
Using this system
Operations
Preparation
∫ To adjust the volume of this system
Press [i VOL j].
≥ Turn on the active subwoofer.
≥ Turn on the TV and/or connected device.
≥ Volume range: 0 to 100
∫ To mute the sound
Press [MUTE].
≥ While muting, “MUTE” is indicated on the display.
≥ To cancel, press the button again or adjust the volume.
≥ Muting is cancelled if the main unit is turned off.
INPUT
SETUP
SOUND
MUSIC

OK

If this system does not operate as
expected or sound is unusual, returning
the settings to the factory preset may
solve the problem. (> 22)
≥ If there is sound coming out of the TV’s speakers, reduce
the volume of the TV to its minimum.
Press [Í] to turn on the main unit.
Select the source.
Press
[INPUT]
[ ]
To select
“TV” (# “BLUETOOTH”
“BLUETOOTH”
≥ This remote control cannot be used to control the
operations of the connected devices.
∫ When “BLUETOOTH” is selected as
the source
On the Bluetooth® device:
Select this system as the output source of the
connected Bluetooth® device and start the
playback.
18
RQT0B25
19 ページ
2016年3月29日 火曜日 午前9時33分
3D sound
This system provides a feeling that the sound and
the image are as one.
≥ To change the applied effect, refer to “Sound
menu”. (> right)
e.g., Image of 3D sound field
Dolby® Virtual
Speaker
3D surround
effect
Clear-mode
dialog
3D sound
With this effect you can enjoy
a surround sound effect
similar to 5.1ch.
Adding to the Dolby Virtual
Speaker effect, Panasonic
has applied its own sound
field controlling technology to
expand the sound field
forwards, backwards,
upwards, and downwards,
providing a sound with depth
and force that better matches
3D images.
Sports commentary and
dialogs from TV dramas are
heard as if the sound is
coming from the TV, giving
the feeling that the sound and
the image are one.
Also, the dialog will stand out
from the other sounds during
normal volume playback and
when the volume is lowered
for night time viewing.
≥ Dolby Virtual Speaker effect is ON except “STEREO”
mode.
≥ To turn off Dolby Virtual Speaker and the 3D surround
effects, select “STEREO” as the sound mode. (> right)
≥ To turn off the 3D surround and the Clear-mode dialog
effects, refer to “3D CLR DIALOG”. (> 20)
Sound menu
Press [SOUND] repeatedly to select
the sound effect.
Press [3, 4] repeatedly to select
the desired setting and then press
[OK].
SOUND
MODE
STANDARD: Best suited
for dramas and comedy
shows.
STADIUM: Produces a
realistic sound for live
sports broadcasts.
MUSIC: Enhance the
sound of musical
instruments and songs.
≥ Instead of steps 1 and 2,
you can select "MUSIC"
mode directly by
pressing and holding
[SOUND] until "MUSIC"
is indicated on the
display.
CINEMA: Produces threedimensional sound unique
to movies.
NEWS: Enhance the voice
of news and sports
commentaries.
STEREO: Play any source
of sound in stereo.
SUBWOOFER
You can adjust the amount
of bass. This system
automatically selects the
most suitable setting
according to the type of
playback source.
LEVEL 1
LEVEL 2: Default for
2 channel audio source
LEVEL 3: Default for multichannel audio source
LEVEL 4
The setting you make is
retained and recalled every
time you play the same
type of source.
RQT0B25
19
Operations
SC-HTB385_EGEB_RQT0B25-B.book
SC-HTB385_EGEB_RQT0B25-B.book
20 ページ
2016年3月29日 火曜日 午前9時33分
DIALOG
Adjust the dialog level.
LEVEL 1
LEVEL 2
LEVEL 3
LEVEL 4
“DIALOG” is not indicated
on the display when “3D
CLR DIALOG” is set to
“OFF”.
H.BASS
Enhance the harmonic
bass effect.
ON
OFF
3D CLR
DIALOG
The 3D Clear Mode Dialog
feature creates a sound field
similar to the sound coming
from a TV screen and
makes dialogues clearer.
ON: 3D Surround, Clear
Mode Dialog and Dolby
Virtual Speaker effect
OFF: Dolby Virtual
Speaker effect
The setting is set back to
“ON” every time you turn
the main unit on.
DUAL
AUDIO
Sets the preferred audio
channel mode when there
are two audio modes
received by this system.
M1: Main
M2: Secondary
M1 + M2: Main + Secondary
This effect only works if the
audio output of the TV or
player is set to “Bitstream”
and “Dolby Dual Mono” is
available in the sound source.
AGC
Auto gain control prevents
sudden loud sound by
reducing the sound level
automatically when the
input is too high.
This function is suitable for
TV broadcast that has
sound level difference.
ON
OFF
If the sound becomes
unnatural, select “OFF”.
20
RQT0B25
LOW VOL
MODE
Enhance the dialog in low
volume condition.
ON
OFF
Select “OFF” to cancel this
effect if the dialog does not
sound natural in low
volume condition.
≥ The default setting is underlined. Changed settings will be
kept until it is changed again, unless otherwise indicated.
Audio format
You can view the current audio format.
Press and hold [OK] for more than 4 sec.
DOLBY
DIGITAL
Dolby Digital is the audio
source.
DTS
DTS® is the audio source.
PCM
2 channel pulse-code
modulation is the audio
source.
21 ページ
2016年3月29日 火曜日 午前9時33分
Setup menu
Press [SETUP] repeatedly to select
the setup item.
Press [3, 4] repeatedly to select
the desired setting and then press
[OK].
DIMMER
Dims the display after
5 seconds of inactivity.
ON
OFF
AUTO
POWER
DOWN
The main unit
automatically is turned off if
there is no audio input and
when you do not use it for
approx. 20 minutes.
ON
OFF
VOL
LIMITATION
Sets the volume limit to 50
when you turn on the main
unit although the volume is
set to above 50 before it is
turned off.
ON
OFF
BLUETOOTH
STANDBY
This function allows you to
connect a paired
Bluetooth® device when
the main unit is in standby
mode.
ON
OFF
The main unit will be
turned on automatically
when you connect a paired
Bluetooth® device.
≥ If this function is set to
“ON”, the standby power
consumption will
increase.
LINK
MODE
Change the Bluetooth®
connection link mode to
suit the connection type.
Make sure to disconnect
the current connected
device (“BLUETOOTH
READY” is indicated on the
display).
MODE 1: Emphasis on
connectivity.
MODE 2: Emphasis on
sound quality.
≥ The default setting is underlined. Changed settings will be
kept until it is changed again, unless otherwise indicated.
Operations
SC-HTB385_EGEB_RQT0B25-B.book
RQT0B25
21
SC-HTB385_EGEB_RQT0B25-B.book
22 ページ
2016年3月29日 火曜日 午前9時33分
Troubleshooting
Reference
Before requesting service, make the following
checks. If you are in doubt about some of the
check points, or if the solutions indicated in the
following guide do not solve the problem, consult
your dealer for instructions.
The main unit is automatically switched to
standby mode.
“AUTO POWER DOWN” function is on.
The main unit will automatically switch to standby
mode when no signal is input and no operation is
performed for approx. 20 minutes. Refer to page
21 to turn this function off.
To return to the factory preset.
While the main unit is on, press and hold [Í/I] on
the main unit for more than 4 sec.
(“RESET” is indicated on the display when this
system is reset.)
If this system does not operate as expected,
returning the settings to the factory preset
may solve the problem.
≥ The remote control code will return to
“REMOTE 1” when this system is returned to
the factory preset. To change the remote
control code, refer to page 17.
General operation
No power.
≥ Unplug the AC mains lead for 10 sec before
plug in again.
≥ After turning the main unit on, if the main unit
immediately turns off, unplug the AC mains lead
and consult your dealer.
The remote control does not work properly.
≥ The battery is depleted. Replace it with a new
one. (> 8)
≥ It is possible that the insulation sheet has not
been removed. Remove the insulation sheet.
(> 8)
≥ It may be necessary to set the code of the
remote control again after changing the battery
of the remote control. (> 17)
≥ Use the remote control within the correct
operation range. (> 8)
≥ Check which remote control signal sensor is
working by the following operation.
jPress and hold [INPUT] on the main unit for
more than 4 sec. “ON TABLE” or “ON WALL”
is indicated on the display for 4 sec.
jRefer to page 8 “About remote control signal
sensor” for the remote control signal sensor
location.
22
RQT0B25
Bluetooth®
Pairing cannot be done.
Check the Bluetooth® device condition.
The device cannot be connected.
≥ The pairing of the device was unsuccessful or
the registration has been replaced. Try pairing
the device again. (> 16)
≥ This system might be connected to a different
device. Disconnect the other device and try
pairing the device again.
The device is connected but audio cannot be
heard through this system.
For some built-in Bluetooth® devices, you have to set
the audio output to “SC-HTB385” manually. Read the
operating instructions for the device for details.
The sound is interrupted.
≥ The device is out of the 10 m communication range.
Bring the Bluetooth® device closer to the main unit.
≥ Remove any obstacle between the main unit
and the device.
≥ Other devices that use the 2.4 GHz frequency
band (wireless router, microwaves, cordless
phones, etc.) are interfering. Bring the
Bluetooth® device closer to the main unit and
distance it from the other devices.
≥ Select “MODE 1” for stable communication.
(> 21)
SC-HTB385_EGEB_RQT0B25-B.book
23 ページ
2016年3月29日 火曜日 午前9時33分
Sound
No sound.
≥ Turn muting off. (> 18)
≥ Check the connections to the other devices.
(> 9, 16)
≥ Make sure that the received audio signal is
compatible with this system. (> 26)
≥ Turn this system off and then on again.
≥ If the connections are correct, there might be a
problem with the cables. Redo the connections
with different cables.
≥ Check the audio output settings on the
connected device.
The dual audio cannot be changed from main
to secondary.
If the audio received from the connected device is
not “Dolby Dual Mono” or the output setting is not
“Bitstream”, the setting cannot be changed from
this system. Change the setting on the connected
device.
The volume is lowered when the main unit is
turned on.
“VOL LIMITATION” is on.
If the main unit is turned off with the volume
setting in the greater half (above 50), the main
unit will automatically lower the volume to the
middle (50) when the main unit is turned on.
(> 21)
There is no audio.
The power of the main unit turns off
automatically.
(When the main unit detects a problem, a safety
measure is activated and the main unit
automatically switches to standby mode.)
≥ There is a problem with the amplifier.
≥ Is the volume extremely high?
If so, lower the volume.
≥ Is this system placed in an extremely hot place?
If so, move this system to a cooler place and
wait a few moments and then try to turn it on
again.
If the problem persists, confirm the display, turn
this system off, remove the AC mains lead cord
and consult your dealer. Please be sure to
remember the display that was indicated and
inform the dealer.
Main unit displays
“F61”
≥ There is a problem with the amplifier of the
system.
≥ Disconnect the AC mains lead and consult the
dealer.
“F76”
≥ There is a problem with the power supply.
≥ Disconnect the AC mains lead and consult the
dealer.
Reference
The dialog is too persistent or the dialog does
not sound natural.
This system has a function to make the dialog
stand out when the volume is low. (> 20)
RQT0B25
23
SC-HTB385_EGEB_RQT0B25-B.book
24 ページ
2016年3月29日 火曜日 午前9時33分
Active Subwoofer
No power.
Ensure the AC mains lead of the active subwoofer
is connected properly.
After turning the subwoofer on, it immediately
turns off.
Unplug the AC mains lead and consult your
dealer.
No sound from the subwoofer.
≥ Check that the active subwoofer is turned on.
≥ Check that the WIRELESS LINK indicator lights
green. (> 16)
The WIRELESS LINK indicator lights red.
≥ There is no link between the main unit and the
active subwoofer.
jCheck that the main unit is turned on.
jTurn the active subwoofer off and then back
on. Alternatively, turn the active subwoofer off,
disconnect the AC mains lead and then
reconnect it.
≥ The active subwoofer and the main unit may not
be paired correctly. Try the following operation.
(Wireless pairing)
1 Turn on the main unit and active subwoofer.
2 Press and hold [ID SET] on the rear of the
active subwoofer for more than 3 sec.
(The WIRELESS LINK indicator will blink in
red.)
3 While pressing and holding [INPUT] on
remote control, press and hold [VOL i] on
the main unit for more than 4 sec.
(“SUBWOOFER PAIRING” will be indicated
on the display.)
≥ When the wireless pairing is successful, “PAIRED”
will be indicated on the display for 2 sec and
WIRELESS LINK indicator lights green.
4 Turn the main unit off and on.
≥ Consult your dealer if the problem persists.
24
RQT0B25
SC-HTB385_EGEB_RQT0B25-B.book
25 ページ
2016年3月29日 火曜日 午前9時33分
About Bluetooth®
Panasonic bears no responsibility for data
and/or information that is compromised
during a wireless transmission.
∫ Frequency band used
This system uses the 2.4 GHz frequency band.
∫ Certification of this device
≥ This system conforms to frequency restrictions
and has received certification based on
frequency laws. Thus, a wireless permit is not
necessary.
≥ The action below are punishable by law in some
countries:
jTaking apart or modifying the unit.
jRemoving specification indications.
∫ Restrictions of use
≥ Wireless transmission and/or usage with all
Bluetooth® equipped devices is not guaranteed.
≥ All devices must conform to standards set by
Bluetooth SIG, Inc.
≥ Depending on the specifications and settings of
a device, it can fail to connect or some
operations can be different.
≥ This system supports Bluetooth® security
features. But depending on the operating
environment and/or settings, this security is
possibly not sufficient. Transmit data wirelessly
to this system with caution.
≥ This system cannot transmit data to a
Bluetooth® device.
∫ Range of use
Use this device at a maximum range of 10 m.
The range can decrease depending on the
environment, obstacles or interference.
∫ Interference from other devices
Unit care
∫ Clean this system with a soft, dry
cloth
≥ When dirt is heavy, wring a cloth moistened in
water tightly to wipe the dirt, and then wipe it
with a dry cloth.
≥ When cleaning the speakers, use a fine cloth.
Do not use tissues or other materials (towels,
etc.) that can fall apart. Small grains may get
stuck inside the speaker cover.
≥ Never use alcohol, paint thinner or benzine to
clean this system.
≥ Before using chemically-treated cloth, carefully
read the instructions that came with the cloth.
∫ To dispose or transfer this system
This system may keep the user settings
information in the main unit. If you discard the
main unit either by disposal or transfer, then follow
the procedure to return all the settings to the
factory presets to delete the user settings. (> 22,
“To return to the factory preset.”)
≥ The operation history may be recorded in the
memory of the main unit.
Licenses
Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are trademarks of
Dolby Laboratories.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing Limited. DTS,
the Symbol, & DTS and the Symbol together are registered
trademarks, and DTS Digital Surround is a trademark of DTS,
Inc. © DTS, Inc. All Rights Reserved.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Panasonic Corporation is under license.
Other trademarks and trade names are those of their
respective owners.
Reference
≥ This system may not function properly and
troubles such as noise and sound jumps may
arise due to radio wave interference if the main
unit is located too close to other Bluetooth®
devices or the devices that use the 2.4 GHz
band.
≥ This system may not function properly if radio
waves from a nearby broadcasting station, etc.
are too strong.
∫ Intended usage
≥ This system is for normal, general use only.
≥ Do not use this system near equipment or in an
environment that is sensitive to radio frequency
interference (example: airports, hospitals,
laboratories, etc.).
RQT0B25
25
SC-HTB385_EGEB_RQT0B25-B.book
26 ページ
2016年3月29日 火曜日 午前9時33分
Specifications
AMPLIFIER SECTION
RMS output power: Dolby Digital Mode
Front ch (L, R ch)
60 W per channel (6 ≠), 1 kHz, 10 % THD
Subwoofer ch
130 W per channel (8 ≠), 100 Hz, 10 % THD
Total RMS Dolby Digital mode power
250 W
TERMINAL SECTION
Digital audio input (TV)
Optical digital input
GENERAL
Power consumption
Main unit
34 W
Active subwoofer
23 W
In standby condition
Main unit§1
When “BLUETOOTH STANDBY” is “OFF”
Approx. 0.48 W
Optical terminalk1
Sampling frequency
32 kHz, 44.1 kHz, 48 kHz
88.2 kHz, 96 kHz (only LPCM)
Audio format
LPCM, Dolby Digital, DTS Digital SurroundTM
USB Port
For service use only.
When “BLUETOOTH STANDBY” is “ON”
Approx. 3 W
Active subwoofer
Power switch off
Approx. 0.25 W
The wireless link is not activated
Approx. 1.3 W
Power supply
AC 220 V to 240 V, 50 Hz
Dimensions (WkHkD)
Main unit
For table top layout
950 mmk53 mmk110 mm
For wall mounting layout
950 mmk110 mmk57 mm
Active subwoofer
180 mmk408 mmk306 mm
Mass
Main unit
For table top layout
Approx. 2.5 kg
For wall mounting layout
Approx. 2.6 kg
Active subwoofer
Approx. 5.0 kg
Operating temperature range
0 oC to i40 oC
Operating humidity range
20 % to 80 % RH (no condensation)
§1 When the other connected devices are turned off.
26
RQT0B25
SC-HTB385_EGEB_RQT0B25-B.book
27 ページ
2016年3月29日 火曜日 午前9時33分
SPEAKER SECTION
Front speakers (Built-in)
Full range
6.5 cm cone type k1/ch
Active subwoofer
Woofer
16 cm cone type k1
WIRELESS SECTION
Wireless module
Frequency Range
2.40335 GHz to 2.47735 GHz
No. of channels
38
Bluetooth® SECTION
Bluetooth® system specification
Bluetooth® Ver.2.1+EDR
Wireless equipment classification
Class 2
Supported profiles
A2DP
Operating frequency
2.4 GHz band FH-SS
Operating distance
10 m Line of Sight
Reference
≥ Specifications are subject to change without notice.
≥ Mass and dimensions are approximate.
≥ Total harmonic distortion is measured by a digital spectrum
analyzer.
RQT0B25
27
SC-HTB385_EGEB_RQT0B25-B.book
28 ページ
2016年3月29日 火曜日 午前9時33分
Disposal of Old Equipment and Batteries
Only for European Union and countries with recycling systems
These symbols on the products, packaging, and/or accompanying documents
mean that used electrical and electronic products and batteries must not be mixed
with general household waste.
For proper treatment, recovery and recycling of old products and used batteries,
please take them to applicable collection points in accordance with your national
legislation.
By disposing of them correctly, you will help to save valuable resources and prevent
any potential negative effects on human health and the environment.
For more information about collection and recycling, please contact your local
municipality.
Penalties may be applicable for incorrect disposal of this waste, in accordance with
national legislation.
Note for the battery symbol (bottom symbol):
This symbol might be used in combination with a chemical symbol. In this case it
complies with the requirement set by the Directive for the chemical involved.
Safety information for customers in Norway
NORSK
ADVARSEL
FORSIKTIG
Produkt
Produkt
≥ For å redusere faren for brann, elektrisk støt
eller skade på apparatet:
jUtsett ikke produktet for regn, fukt, drypping
eller sprut.
jIkke plasser objekter som er fylt med væske,
som vaser, på apparatet.
jBruk kun anbefalt tilbehør.
jFjern ikke deksler.
jReparer ikke denne enheten selv, overlat
service til kvalifisert servicepersonell.
≥ Plasser ikke åpen ild, slik som levende lys, oppå
apparatet.
≥ Dette apparatet er beregnet for bruk under
moderate klimaforhold.
Vekselstrømnett
≥ Nettstøpselet er trukket ut fra denne enheten.
Installer denne enheten slik at nettstøpselet
umiddelbart kan trekkes fra stikkontakten.
28
RQT0B25
Plassering
≥ For å redusere faren for brann, elektrisk støt
eller skade på apparatet:
jIkke plasser apparatet i en bokhylle, et
innebygget kabinett eller et annet lukket sted.
Pass på at produktet er godt ventilert.
jApparatets ventilasjonsåpninger må ikke
dekkes til med aviser, duker, gardiner eller
lignende.
SC-HTB385_EGEB_RQT0B25-B.book
29 ページ
2016年3月29日 火曜日 午前9時33分
English
Declaration of Conformity (DoC)
Lietuviškai
Hereby, “Panasonic Corporation” declares that this product is in
compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
Customers can download a copy of the original DoC to our R&TTE
products from our DoC server:
http://www.doc.panasonic.de
Contact to Authorised Representative: Panasonic Marketing
Europe GmbH,
Panasonic Testing Centre, Winsbergring 11, 22525 Hamburg,
Germany
Bendrovė “Panasonic Corporation” patvirtina, kad šis gaminys
tenkina direktyvos 1999/5/EB esminius reikalavimus ir kitas
taikytinas nuostatas.
Mūsų R&TTE gaminių originalios atitikties deklaracijos kopiją
klientai gali atsisiųsti iš mūsų AD serverio:
http://www.doc.panasonic.de
Įgaliotojo atstovo adresas: “Panasonic Marketing Europe GmbH”,
Panasonic Testing Centre, Winsbergring 11, 22525 Hamburg,
Vokietija.
Atitikties deklaracija (AD)
Ελληνικά
Slovensko
Δήλωση συμμόρφωσης (DoC)
Izjava o skladnosti (DoC)
Português
Declaração de Conformidade (DoC)
Com o presente documento, a “Panasonic Corporation” declara
que este produto é conforme os requisitos específicos e demais
especificações referentes à Directriz 1999/5/EC.
Os clientes podem baixar uma cópia da declaração de
conformidade (DoC) para nossos produtos R&TTE do Server DoC:
http://www.doc.panasonic.de
Contacte o representante autorizado: Panasonic Marketing
Europe GmbH,
Panasonic Testing Centre, Winsbergring 11, 22525 Hamburg,
Alemanha
Hrvatski
Deklaracija o podobnosti (DoC)
Ovime, “Panasonic Corporation” izjavljuje da je ovaj proizvod
udovoljava osnovnim zahtjevima i ostalim relevantnim uvjetima
Smjernice 1999/5/EC.
Kupci mogu preuzeti kopiju originalne DoC za naše R&TTE
proizvode s našeg DoC poslužitelja:
http://www.doc.panasonic.de
Adresa ovlaštenog predstavništva: Panasonic Marketing Europe
GmbH,
Panasonic Testing Centre, Winsbergring 11, 22525 Hamburg,
Njemačka
S pričujočo izjavo podjetje “Panasonic Corporation” izjavlja, da so
svoji izdelki skladni s poglavitnimi zahtevami in drugimi
odgovarjajočimi predpisi direktive 1999/5/ES.
Stranka lahko naloži izvod izvirnega DoC o naših izdelkih R&TTE s
strežnika DoC:
http://www.doc.panasonic.de
Pooblaščeni zastopnik: Panasonic Marketing Europe GmbH,
Panasonic Testing Centre, Winsbergring 11, 22525 Hamburg,
Nemčija
Slovensky
Vyhlásenie o zhode (DoC)
“Panasonic Corporation” týmto prehlasuje, že tento výrobok je v
zhode so základnými požiadavkami a ďalšími príslušnými
ustanoveniami smernice 1999/5/ES.
Zákazníci si môžu stiahnuť kópiu pôvodného DoC na naše R&TTE
výrobky z nášho servera DoC:
http://www.doc.panasonic.de
Kontakt na splnomocneného zástupcu: Panasonic Marketing
Europe GmbH,
Panasonic Testing Centre, Winsbergring 11, 22525 Hamburg,
Nemecko
Norsk
Samsvarserklæring (DoC)
“Panasonic Corporation” erklærer at utstyret er i samsvar med de
grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.
Kundene kan laste ned en kopi av den originale
samsvarserklæringen (DoC) for vårt R&TTE utstyr fra vår DoC
server:
http://www.doc.panasonic.de
Kontakt vår autoriserte representant: Panasonic Marketing Europe
GmbH,
Panasonic Testing Centre, Winsbergring 11, 22525 Hamburg,
Tyskland
Reference
Με την παρούσα, η “Panasonic Corporation” δηλώνει ότι το
προϊόν αυτό είναι σύμφωνο με τις βασικές απαιτήσεις και άλλες
σχετικές διατάξεις της οδηγίας 1999/5/ΕC.
Οι πελάτες μπορούν να κατεβάσουν ένα αντίγραφο του
πρωτοτύπου DoC για τα R&TTE προϊόντα μας από τον DoC
server μας:
http://www.doc.panasonic.de
Στοιχεία επικοινωνίας Eξουσιοδοτημένου Aντιπροσώπου:
Panasonic Marketing Europe GmbH,
Panasonic Testing Centre, Winsbergring 11, 22525 Hamburg,
Γερμανία
RQT0B25
29
SC-HTB385_EGEB_RQT0B25-B.book
30 ページ
2016年3月29日 火曜日 午前9時33分
Eesti keel
Român
Vastavusdeklaratsioon (DoC)
Declaraţie de Conformitate (DoC)
“Panasonic Corporation” kinnitab käesolevaga, et see toode on
vastavuses põhiliste nõuete ja muude direktiivi 1999/5/EÜ
asjakohaste sätetega.
Kliendid saavad koopia meie R&TTE toodetele kehtiva
originaalvastavusdeklaratsiooni koopia alla laadida meie DoCserverist:
http://www.doc.panasonic.de
Võtke ühendust volitatud esindajaga: Panasonic Marketing
Europe GmbH,
Panasonic Testing Centre, Winsbergring 11, 22525 Hamburg,
Saksamaa
Prin prezenta, societatea “Panasonic Corporation” declară că
produsul este conform cu cerinţele esenţiale şi cu alte norme
corespunzătoare Directivei 1999/5/EC.
Clienţii pot descărca o copie a DoC-ului original al produselor
noastre R&TTE de la adressa noastră DoC din Internet:
http://www.doc.panasonic.de
Contact la Reprezentanţa autorizată: Panasonic Marketing Europe
GmbH,
Panasonic Testing Centre, Winsbergring 11, 22525 Hamburg,
Germania
Latviski
Atbilstības deklarācija (DoC)
Megfelelőségi Nyilatkozat (DoC)
Kompānija “Panasonic Corporation” ar šo paziņo, ka šis
izstrādājums atbilst būtiskām prasībām un citām saistošām
Direktīvas 1999/5/EK prasībām.
Pircēji var lejupielādēt oriģinālo DoC kopiju mūsu R&TTE
izstrādājumos no mūsu DoC servera:
http://www.doc.panasonic.de
Lūdzam sazināties ar pilnvaroto parstāvi Panasonic
Marketing Europe GmbH,
Panasonic Testing Centre, Winsbergring 11, 22525
Hamburg, Vācijā
Български
Декларация за съответствие (DoC)
“Panasonic Corporation” декларира, че този продукт
съответства на съществените изисквания и другите
приложими разпоредби на Директива 1999/5/EC.
Потребителите могат да свалят копие от оригиналните DoC
към нашите продуктите от типа R&TTE от сървъра, на който се
съхраняват DoC:
http://www.doc.panasonic.de
За контакт с оторизиран представител: Panasonic Marketing
Europe GmbH,
Panasonic Testing Centre, Winsbergring 11, 22525 Hamburg,
Германия
30
RQT0B25
Magyar
Ezennel a , “Panasonic Corporation” kijelenti, hogy a jelen termék
kielégíti az 1999/5/EK Irányelv létfontosságú követelményeit és
más vonatkozó rendelkezéseit.
A vásárlók letölthetik az R&TTE termékek eredeti DoC másolatát a
DoC szerverünkről:
http://www.doc.panasonic.de
Forduljon a hivatalos márkaképviselethez: Panasonic Marketing
Europe GmbH,
Panasonic Testing Centre, Winsbergring 11, 22525 Hamburg,
Németország
Türkçe
Uygunluk Beyanı (DoC)
“Panasonic Corporation” işbu belge ile bu ürünün 1999/5/EC sayılı
Direktif'in temel gereklerine ve diğer ilgili hükümlerine uygun
olduğunu beyan etmektedir.
Müşterilerimiz R&TTE ürünlerimizle ilgili orijinal DoC belgesinin bir
kopyasını DoC sunucumuzdan indirebilir:
http://www.doc.panasonic.de
Yetkili Temsilci ile temasa geçin:
Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 11, 22525 Hamburg, Almanya
31 ページ
2016年3月29日 火曜日 午前9時33分
Reference
SC-HTB385_EGEB_RQT0B25-B.book
RQT0B25
31
SC-HTB385_EGEB_RQT0B25-B.book
31 ページ
2016年3月29日 火曜日 午前9時33分
For the United Kingdom and Ireland customers
Sales and Support Information
Customer Communications Centre
• For customers within the UK: 0344 844 3899
• For customers within Ireland: 01 289 8333
• Monday–Friday 9:00 am – 5:00 pm (Excluding public holidays).
• For further support on your product, please visit our website: www.panasonic.co.uk
Direct Sales at Panasonic UK
• Order accessory and consumable items for your product with ease and confidence by phoning our Customer
Communications Centre
Monday–Friday 9:00 am – 5:00 pm
(Excluding public holidays).
• Or go on line through our Internet Accessory ordering application at www.pas-europe.com.
• Most major credit and debit cards accepted.
• All enquiries transactions and distribution facilities are provided directly by Panasonic UK.
• It couldn’t be simpler!
• Also available through our Internet is direct shopping for a wide range of finished products. Take a browse on our
website for further details.
EU
Manufactured by:
Panasonic Corporation
Kadoma, Osaka, Japan
Importer for Europe: Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 11, 22525 Hamburg, Germany
Panasonic Corporation
Web Site: http://www.panasonic.com
Panasonic Corporation 2016
RQT0B25-B
F0316RK1046
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement