Panasonic SCPM25PP Operating Instructions

Add to my manuals
28 Pages

advertisement

Panasonic SCPM25PP Operating Instructions | Manualzz
CD Stereo System
Operating Instructions
Model No.
SC-PM25
Before connecting, operating or adjusting this product, please read these
instructions completely.
Please keep this manual for future reference.
PP
enCover
RQT5717-2Y
1
7/16/01, 10:06 AM
Table of contents
Dear customer
Thank you for purchasing this product.
For optimum performace and safety, please read these instructions
carefully.
Before use
These operating instructions are applicable to the following system.
System
SC-PM25
Main unit
SA-PM25
Speakers
SB-PM25
Before use
IMPORTANT SAFETY INSTRUCTIONS ....................................
Placement of speakers ..............................................................
The remote control ....................................................................
Connections ...............................................................................
Front panel controls ..................................................................
Auto power-off ...........................................................................
Setting the time ..........................................................................
Convenient Functions ...............................................................
Turning the demo function off ..................................................
4
5
5
6
8
8
9
9
9
Listening operations
The model number and serial number of this product can be
found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
future reference.
The radio: manual tuning .........................................................
The radio: preset tuning ...........................................................
CDs ..............................................................................................
Cassette tapes ............................................................................
10
11
12
15
MODEL NUMBER
Recording operations
SERIAL NUMBER
Before recording ........................................................................ 16
Recording the radio ................................................................... 17
Recording CDs ........................................................................... 18
User memo:
DATE OF PURCHASE
DEALER NAME
Timers and others
DEALER ADDRESS
TELEPHONE NUMBER
Changing the sound quality ...................................................... 20
Using an external unit ............................................................... 20
Using the timers ......................................................................... 21
References
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
Troubleshooting guide ..............................................................
Servicenter List (U.S.A.) ............................................................
Warranty (U.S.A.) .......................................................................
Specifications .............................................................................
Maintenance ...............................................................................
Product Service ..........................................................................
Memo ...........................................................................................
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS
TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT
NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,
SHALL BE PLACED ON THE APPARATUS.
CAUTION:
TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
CAUTION!
DO NOT INSTALL, OR PLACE THIS UNIT, IN A BOOKCASE,
BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.
ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT
RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
2
RQT5717
e2-3
2
3/25/05, 4:14 AM
23
24
25
26
26
26
27
Supplied accessories
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
AC power supply cord ................................................... 1 pc.
(RJA0065-A)
FM indoor antenna (RSA0006-L) .................................. 1 pc.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
¡ Reorient or relocate the receiving antenna.
¡ Increase the separation between the equipment and
receiver.
¡ Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
¡ Consult the dealer or an experienced radio/TV technician
for help.
Before use
CAUTION:
Please check and identify the supplied accessories.
Use numbers indicated in parentheses when
asking for replacement parts.
(Only for U.S.A.)
To order accessories contact 1-800-332-5368
or web site (http://www.panasonic.com).
Any unauthorized changes or modifications to this equipment
would void the user’s authority to operate this device.
AM loop antenna set ...................................................... 1 pc.
(RSA0033A)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Remote control transmitter ........................................... 1 pc.
(RAK-SC981WK)
Remote control batteries ............................................. 2 pcs.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
3
RQT5717
e2-3
3
3/25/05, 4:14 AM
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the safety precautions listed below.
Keep these operating instructions handy for future reference.
Before use
Safety
1. Power source—Connect the unit to a power source of the type
described in these instructions or as marked on the unit.
2. Polarization—The unit is equipped with a polarized power plug
where one blade is wider than the other. This safety feature
ensures that the plug fits into your household AC outlet only one
way. If the plug doesn’t fit one way, try reversing it. If the plug
still doesn’t fit, contact an electrician to replace the obsolete
outlet. Do not attempt to defeat the safety purpose of the plug.
3. Power cord protection—Route the AC power supply cord so
that it will not be walked on or pinched by items placed on or
against it. Never take hold of the plug or cord with wet hands.
Always grasp the plug body firmly when connecting and
disconnecting it.
4. Overloading—When connecting the AC power supply cord, be
careful not to overload the household AC outlet, extension cord,
or outlet from any other device as this can result in fire or electric
shock.
5. Nonuse periods—Turn the unit off when it is not in use. Unplug
the unit from the household AC outlet if it is not to be used for a
long time. Unplug the unit during lightning storms.
4. Outdoor antenna grounding—If you connect an outdoor
antenna, ground the antenna system to protect against voltage
surges and built-up static charges. Section 810 of the National
Electrical Code, ANSI/NFPA No. 70-1990, provides information
about grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the grounding
electrode. Refer to this diagram.
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
6. Attachments and accessories—Use only the attachments and
accessories recommended in these operating instructions.
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
Installation
NEC—NATIONAL ELECTRICAL CODE
Placement
1. Ventilation—Situate the unit so that it receives proper ventilation.
Do not install in a confined space such as a bookcase or cabinet.
Allow at least 10 cm (4 inches) clearance from the rear of the
unit. To prevent the risk of electric shock or fire due to overheating
ensure curtains and other materials do not obstruct the unit’s
ventilation.
2. Foreign material—Ensure objects and liquids do not get into
the unit. Avoid exposing the unit to excessive smoke, dust,
mechanical vibration, and shock.
3. Magnetism—Situate the unit away from equipment and devices
that generate strong magnetic fields.
4. Stacking—Do not place heavy objects on top of this unit.
5. Surface—Place the unit on a flat, level surface.
6. Carts and stands—Use the unit only with carts
and stands recommended by the manufacturer.
Move carts with care. Sudden stops, excessive
force, and uneven surfaces can cause carts to
overturn.
7. Wall and ceiling mounting—Do not mount the unit on walls or
ceilings unless specified in the instructions.
Environment
1. Water and moisture—Do not use the unit near water, such as
near a bathtub or swimming pool. Avoid damp basements.
2. Heat—Situate the unit away from heat sources, such as radiators.
Do not situate where temperatures fall below 5˚C (41˚F) or rise
above 35˚C (95˚F).
3. Power lines—Take care when setting up an outdoor antenna
that it is not near overhead power lines, electric lights, or electrical
circuits, and that there is no danger of the antenna falling on
power lines, electric lights, or electrical circuits. When installing
an outdoor antenna, take extreme care not to touch such power
lines or circuits, as contact with them can be fatal.
Maintenance
(See page 26 for details.)
Unplug the unit from the household AC outlet before cleaning.
Clean with a damp cloth.
Do not use abrasive pads, scouring powders, or solvents.
Service
1. Damage requiring service—The unit should be serviced by
qualified service personnel if:
(a) The AC power supply cord or the plug has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked
change in performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing—Do not attempt to service the unit beyond that
described in these operating instructions. Refer all other servicing
to authorized servicing personnel.
3. Replacement parts—When parts need replacing ensure the
servicer uses parts specified by the manufacturer or parts that
have the same characteristics as the original parts. Unauthorized
substitutes may result in fire, electric shock, or other hazards.
4. Safety check—After repairs or service, ask the servicer to perform
safety checks to confirm that the unit is in proper working
condition.
4
RQT5717
e4-9
ANTENNA
LEAD IN
WIRE
4
3/25/05, 4:33 AM
The remote control
Listening caution
Battery installation
EST. 1924
We recommend you to avoid prolonged exposure to excessive
noise.
Sound can be deceiving. Over time your hearing “comfort level”
adapts to higher volumes of sound. So what sounds “normal” can
actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level
BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and
clearly, and without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage
or loss in the future. After all, we want you listening for a lifetime.
Before use
R6, AA, UM-3
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to
consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out
of your equipment by playing it at a safe level. One that lets the
sound come through loud and clear without annoying blaring or distortion—and, most importantly, without affecting your sensitive
hearing.
Use of batteries
•
•
•
•
•
•
•
•
Align the poles (+ and –) properly when inserting the batteries.
Do not mix old and new batteries or different types of batteries.
Do not recharge ordinary dry cell batteries.
Do not heat or disassemble the batteries. Do not allow them to
contact flame or water.
Remove the batteries if the unit is not to be used for a long time.
Do not keep together with metallic objects such as necklaces.
Do not use rechargeable type batteries.
Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
Correct method of use
Placement of speakers
Speakers are designed identically so that no left or right channel
orientation is necessary.
Remote control
signal sensor
About 7 meters
in front of the
signal sensor
Notes
• Keep your speakers at least 10 mm (13/32˝) away from the system
for proper ventilation.
• These speakers do not have magnetic shielding. Do not place them
near televisions, personal computers or other devices easily
influenced by magnetism.
• To avoid damage to the speakers, do not touch the speakers cones
if you have taken the nets off.
Transmission window
Operations notes
• Do not place obstacles between the remote control signal sensor
and remote control unit.
• Do not expose the remote control signal sensor to direct sunlight or
to the bright light of a fluorescent light.
• Take care to keep the remote control signal sensor and end of the
remote control unit free from dust.
• If this system is installed in a rack with glass doors, the glass doors’
thickness or color might make it necessary to use the remote
control a shorter distance from the system.
To prevent damage
• Never place heavy items on top of the unit.
• Do not disassemble or reconstruct the unit.
• Do not spill water or other liquids into the unit.
5
RQT5717
e4-9
5
1/17/01, 6:22 PM
Before use
Connections
1
2
• Plug the AC power cord into a household AC outlet only after all
other connections have been made.
• To prepare the AM loop antenna wire and speaker cords, twist the
vinyl cover tip and pull off.
3
1
Connect the FM indoor antenna.
Tape the antenna to a wall or column, in a position where
radio signals are received with the least amount of
interference.
4
Note
For the best reception :
To household
AC outlet
1
An FM outdoor antenna is recommended (\ page 7.)
2
Connect the AM loop antenna.
After attaching the antenna, turn on the system and tune in a
broadcast station. Put the antenna where the reception is best
and interference is minimal.
Adhesive
tape
FM indoor
antenna
3
Connect the speaker cables.
Connect each end of the speaker cables to the terminal lever
of the same color so (+) and (–) are correct. Never allow the
exposed wires to contact each other when connected.
Incorrect connection can damage the unit.
GND
Caution
Use only the supplied speakers
The combination of the main unit and speakers provide the
best sound. Using other speakers can damage the unit and
sound quality will be negatively affected.
2
Caution
• Use the speakers only with the recommended system.
Failure to do so may lead to damage to the
amplifier and/or the speakers, and may
result in the risk of fire.
Consult a qualified service person if damage
has occurred or if you experience a sudden
change in performance.
• Do not attach these speakers to walls or
ceilings.
T
AM AN
LOOP
EXT
AM loop antenna
4
Connect the AC power cord
Note
The included AC power supply cord is for use with this unit
only. Do not use it with other equipment.
3
L
R
Speaker (SB-PM25)
ª
ª··
Red
Grey
Blue
Black
L
R
)
-PM25
er (SB
Speak
6
RQT5717
e4-9
6
1/17/01, 6:22 PM
A
Connections
FM Outdoor antenna
(not included)
Optional antenna connections
75Ω coaxial
cable
(not included)
You may need an outdoor antenna if you use this system in a
mountainous region or inside a reinforced-concrete building, etc.
Shield braid
Core wire
A
FM Outdoor antenna
Disconnect the FM indoor antenna if an FM outdoor antenna is
installed.
1 Remove a piece of the outer vinyl insulator.
2 Twist the shield braid.
3 Expose the core wire.
Note
An outdoor antenna should be installed by a qualified technician
only.
B
Before use
GND
AM outdoor antenna (not included)
B
Connect the outdoor antenna without removing the AM loop
antenna. Run 5 to 12 m of vinyl-covered wire horizontally along a
window or other convenient location.
5-12m
AM A
AM outdoor antenna
NT
Note
When the unit is not in use, disconnect the outdoor antenna to
prevent possible damage that may be caused by lighting. Never use
an outdoor antenna during an electrical storm.
P
LOO
EXT
External unit connections
• Make sure that the power supply for all components has been
turned off before making any connections.
• For details, refer to the operating instructions of the unit which are
to be connected.
• All peripheral components and cables sold separately.
C
(L)
Analog player
(not included)
(R)
AUX
R L
Rear panel of this unit
C
Connecting analog equipment
An analog player with a built-in phono equalizer can be connected.
When units other than those described are to be connected, please
consult your audio dealer.
7
RQT5717
e4-9
7
1/17/01, 6:22 PM
Front panel controls
A
Main unit
A
Top of the
unit
1 Headphone jack (PHONES) ................................................... 20
2 Standby/on switch (POWER )
Before use
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of
power.
3 AC supply indicator (AC IN)
This indicator lights when the unit is connected to the AC power
supply.
4 Display
5 Cassette slot
6 Remote control signal sensor
7 Display select/demonstration button ..................................... 9
(DISPLAY, –DEMO)
8 CD, Tape, Tuner, Aux select button
(SELECTOR) ............................................................... 13, 18, 20
9 CD edit button (CD EDIT) ...................................................... 19
0 Recording start/pause button ([REC/ J) ....................... 17, 18
! Cassette eject button (EJECT c) ......................................... 15
@ Volume control (VOLUME DOWN, UP) ..................... 10, 12, 15
# CD tray open/close button (OPEN/CLOSE c) ..................... 12
$ CD Tray
% Tuner/band select button and indicator
(TUNER/BAND) ....................................................................... 10
^ Cassette play/direction button and indicator
(TAPE 1 2) .............................................................................. 15
& CD play/pause button and indicator (CD -/ J) ................... 12
* CD, Tape stop button (STOP L) ...................................... 12, 15
( Skip/search/preset channel button
4/REW/ g , 3 /FF/ f ) ........................................ 10, 12, 16
(4
TUNER/BAND
CD
TAPE
STOP
FF
REW
Remote Control
B
B
AUTO OFF SLEEP
CLOCK
TIMER
1
2
3
PLAY
REC
4
5
6
10
7
8
9
0
TUNE MODE PROGRAM CANCEL PLAY MODE
SELECTOR
SELECT
OR TUNER TAPE
APE
REV MODE
CLEAR
CD
REW
FF
TREBLE
BASS
SOUND
MUTING VIRTUALIZER DIMMER DISPLAY
VOLUME
Buttons such as 2 function in exactly same way as the buttons on
the main unit.
) Auto power off button (AUTO OFF) ........................................ 8
¡ Numeric buttons .............................................................. 11, 12
™ Program button (PROGRAM) ................................................ 14
£ Tuning mode select button (TUNE MODE) .................... 10, 17
Reverse mode select button
(REV MODE) ..................................................................... 17, 18
Bass buttons (–BASS+) ......................................................... 20
§ Sound virtualizer button
(SOUND VIRTUALIZER) ......................................................... 20
Muting button (MUTING) ........................................................ 9
• Sleep timer button (SLEEP) .................................................. 22
ª Clock/timer button (CLOCK/TIMER) ........................... 9, 21, 22
º Play timer/recording timer button (˚
˚PLAY/REC) .......... 21, 22
⁄ Cancel button (CANCEL) ....................................................... 14
¤ Play mode select button (PLAY MODE) ............................... 13
‹ Treble buttons (–TREBLE+) .................................................. 20
› Dimmer button (DIMMER) ....................................................... 9
C
C
AUTO OFF
AUTO OFF SLEEP
CLOCK
TIMER
PLAY
REC
2
3
4
5
6
10
7
8
9
0
1
TUNE MODE PROGRAM CANCEL PLAY MODE
8
RQT5717
e4-9
8
RDS PS PTY
AUTO OFF FADER
S
C O O
Auto power-off
by remote control only
When “CD” or “TAPE” is selected as the source
To save power, the unit turns off if it is left unused for 10 minutes.
Press [AUTO OFF].
“AUTO OFF” is displayed.
To cancel
Press [AUTO OFF] again.
For your reference
• The setting is maintained even if the unit is turned off. When the
unit is turned on again, the unit functions as described above.
• If you select any source other than “CD” or “TAPE”, “AUTO OFF”
goes out. It comes on again when you select “CD” or “TAPE”.
1/17/01, 6:22 PM
A
A
AUTO OFF SLEEP
CLOCK
TIMER
PLAY
REC
2
3
4
5
6
10
7
8
9
0
1
2
4
TUNE MODE PROGRAM CANCEL PLAY MODE
SELECTOR TUNER TAPE
REV MODE
CLEAR
CD
FF
REW
TREBLE
BASS
SOUND
MUTING VIRTUALIZER DIMMER
3
by remote control only
This is a 12-hour clock.
The example shows how to set the clock for 6:30 pm
1
2
y] to turn the unit on.
Press [y
Press [CLOCK/ TIMER] to
“CLOCK”.
DISPLAY
VOLUME
DIMMER
display
Every time you press the button:
CLOCK
3
PLAY
REC
Original display
Within 7 seconds
4/REW] or [f ,3
3/FF] to
Press [ g,4
set the time.
1
Before use
1
Setting the time
Press and hold to change the time faster.
4
Press [CLOCK / TIMER].
The time is set and the original display is restored.
2
CLOCK/
TIMER
Displaying the clock.
When the unit is ON:
Press [DISPLAY/– DEMO].
To cancel
Press [DISPLAY/–DEMO] again.
Note
The clock may lose or gain some time over a period. Readjust if
necessary.
3
4/REW
g
3/FF
f
Convenient Functions
To dim the display panel
B
4
CLOCK/
TIMER
by remote control only
Use this when you are going to sleep or any other time you would
prefer the panel to be dimmer.
B
Press [DIMMER].
The display panel dims and side panel indicators, except for the [AC
IN] indicator, go out.
SOUND
MUTING VIRTUALIZER DIMMER DISPLAY
DIMMER
VOLUME
To cancel
Press [DIMMER] again.
To mute the volume
C
C
SOUND
MUTING VIRTUALIZER DIMMER
by remote control only
DISPLAY
MUTING
VOLUME
This feature is convenient when you have a telephone call, etc.
Press [MUTING].
Press the button again to cancel. (“MUTING” goes out.)
Muting can also be cancelled by lowering the volume all the way (-dB).
When the system is turned off, the muting operation will be
automatically cancelled.
D
D
DISPLAY,
–DEMO
Turning the demo function off
If the clock has not been set, a demonstration of the display is shown
when the unit is switched to standby.
This function is set to on at the time of purchase.
Press and hold [DISPLAY, –DEMO] until “NO DEMO” is
displayed.
The display changes each time the button is held down.
NO DEMO (off) ↔ DEMO (on)
DISPLAY
9
–DEMO
e4-9
RQT5717
9
1/17/01, 6:22 PM
The radio: manual tuning
1
1
2
Press [POWER
] to turn the unit on.
Press [TUNER/BAND] to select “FM”
or “AM”.
Every time you press the button:
FM W AM
3
5
4
2
3
Every time you press the button:
MANUAL W PRESET
Listening operations
4
1
5
Adjust the volume.
Auto tuning
TUNER/BAND
4/REW/ g] or [3
3/FF/ f] for a moment until the
Press and hold [4
frequency starts changing rapidly. The unit begins auto tuning,
stopping when it finds a station.
• Auto tuning may not function when there is excessive interference.
4/REW/ g] or [3
3/FF/ f] once
• To cancel auto tuning, press [4
again.
MHz
3
4/REW/ g] or [3
3/FF/ f] to
Press [4
select the frequency of the required
station.
“TUNED” is displayed when a radio station is tuned.
“ST” is displayed when a stereo FM broadcast is being
received.
POWER
2
Press [TUNE MODE] on the remote
control to select “MANUAL”.
TUNE MODE
A
If noise is excessive in FM
by remote control only
Press and hold [TUNE MODE] to display “MONO”.
4
This mode improves sound quality if reception is weak, but
broadcasts will be heard in monaural.
Press and hold [TUNE MODE] again to cancel the mode.
“MONO” goes out. MONO is also canceled if the frequency is
changed.
Turn off “MONO” for normal listening. Stereo and monaural
broadcasts are automatically played as they are received.
4/REW/ g 3/FF/ f
TUNED ST
MHz
FM allocation setting
5
VOLUME
DOWN
dB
UP
A
Press and hold [TUNER/BAND]. After a few seconds, the display
will change to a flashing display of the current minimum FM
frequency. If you continue to hold the button down, the minimum
frequency will change. Release the button at this time.
TUNE MODE
AUTO OFF SLEEP
CLOCK
TIMER
1
2
3
PLAY
REC
4
5
6
10
7
8
9
0
To return to the original frequency indication, repeat above.
TUNE MODE PROGRAM CANCEL PLAY MODE
SELECTOR TUNER TAPE
CLEAR
REW
Main unit only
By adjusting the allocation, you can enable this tuner to receive FM
broadcasts allocated in 0.1 MHz steps.
TUNED
CD
FF
MONO
MHz
Note
• After changing the “allocation” setting, the frequencies you
previously preset in the memory will be cleared.
• Sound is momentarily interrupted if you load/unload tapes while
listening to an AM broadcast.
10
RQT5717
e10-13
10
1/17/01, 6:26 PM
The radio: preset tuning
AUTO OFF SLEEP
CLOCK
TIMER
by remote control only
PLAY
REC
2
3
4
5
6
10
7
8
9
0
1
TUNE MODE PROGRAM CANCEL PLAY MODE
SELECTOR TUNER TAPE
TUNER
REV MODE
PROGRAM
CD
FF
REW
CLEAR
TREBLE
BASS
SOUND
MUTING VIRTUALIZER DIMMER DISPLAY
VOLUME
There are two methods of presetting stations.
Automatic presetting: All the stations the tuner can receive are
preset.
Manual presetting:
You can select the stations to preset and
the order they are preset in
Up to 15 stations each can be set in the FM and AM bands.
Preparation:
Press [TUNER] to select “FM” or “AM”.
A
Automatic presetting
Do the following once each for FM and AM.
Preparation:
Tune to the frequency where presetting is to begin (\page 10).
Press and hold [PROGRAM].
The tuner presets all the stations it can receive into the channels in
ascending order. When finished, the last station memorized is tuned
in.
PROGRAM
MHz
Manual presetting
PRGM
Preset the stations one at a time.
MHz
PRGM
B
AUTO OFF SLEEP
The station occupying a channel is erased if another station is preset
in that channel.
CLOCK
TIMER
PLAY
REC
2
3
4
5
6
10
7
8
9
0
1
1 Press [TUNER] to select “FM” or “AM”.
2 Press [PROGRAM] then press [ g,4
4/REW] or
3 /FF ] to tune to the required station.
[f,3
3 Press [PROGRAM] then press [ g,4
4/REW] or
3 /FF ] to select a channel.
[f,3
4 Press [PROGRAM].
Listening operations
A
1
B
Selecting channels
TUNE MODE PROGRAM CANCEL PLAY MODE
SELECTOR TUNER TAPE
REV MODE
1
CD
REW
CLEAR
FF
TREBLE
BASS
For channels 1 to 9 press the corresponding number.
≥10], then the two digits.
For channels 10 to 15 press [≥
or
SOUND
MUTING VIRTUALIZER DIMMER DISPLAY
VOLUME
1
1
2
3
4
5
6
10
7
8
9
0
Press the numbered buttons to select
the channel.
2
2
1 Press [TUNE MODE] to select
“PRESET”.
2 Press [g,4
4/REW] or [f,3
3 /FF]
to select the channel.
Adjust the volume.
Preset channel
2
VOLUME
11
RQT5717
e10-13
11
1/17/01, 6:26 PM
CDs
1
This unit can play CD-DA format audio CD-R and CD-RW that have
been finalized upon completion of recording.
It may not be able to play some CD-R or CD-RW due to the condition
of the recording.
Finalizing is a process that enables CD-R/CD-RW players to play
audio CD-R and CD-RW.
4
5
2, 3
1
2
3
Press [POWER
] to turn the unit on.
Press [OPEN/CLOSE c] to open the
tray.
Insert the CD.
Set a CD label up on the tray.
Press [OPEN/CLOSE c] to close the tray.
Listening operations
4
5
Press [CD -/ J] to start play.
Adjust the volume.
To stop the disc.
Press [STOP L].
To pause play
POWER
Press [CD -/ J]. Press [CD -/ J] again to resume play.
Skipping tracks
4/REW/ g] (backward) or [3
3 /FF/ f] (forward).
Press [4
Searching through tracks
During play or pause
4/REW/ g] (backward) or [3
Press and hold [4
3 /FF/ f] (forward).
To select a track with the remote control
Label must face upward
Press the numeric button(s) to select the desired track.
To select a two-digit track
≥10] and then the two numbers you want.
Press [≥
For example
Total number of tracks
≥10]→[2]→[0]
Track no. 20: [≥
≥10]→[3]→[5]
Track no. 35: [≥
Total play time
One touch play
When a CD is loaded and the unit is off, press [CD -/ J]. The unit
comes on and starts play.
To remove a CD
Track number
Elapsed play time
Press [OPEN/CLOSE c].
Note
• During random play (\page 13), you cannot skip to tracks which
have already been played.
• During program play (\page 14), or random play, you cannot
search forward or backward over tracks.
• During program play, skipping is always in the programmed order,
whether forward or backward.
• Program play cannot be used in combination with random play.
dB
A CD selection and care
b
Do not;
• use irregularly shaped discs. ( )
• attach extra labels and stickers.
• use discs with labels and stickers that are coming off or with
adhesive exuding from under labels and stickers. ( )
• attach scratch-proof covers or any other kind of accessory.
• write anything on the CD.
• clean CDs with liquids. (Wipe with a soft, dry cloth.)
• use CDs printed with label printed available on the market.
c
b
c
12
RQT5717
e10-13
a)
With this system, you can only play CDs having this mark. (
a
12
1/17/01, 6:26 PM
CDs
A
AUTO OFF SLEEP
2
CLOCK
TIMER
1
2
3
PLAY
REC
4
5
6
10
7
8
9
0
A
Direct access play
by remote control only
TUNE MODE PROGRAM CANCEL PLAY MODE
1
SELECTOR TUNER TAPE
REV MODE
CLEAR
CD
REW
FF
Direct access allows you to start normal play from a specific track to
the last track on the CD.
TREBLE
BASS
SOUND
MUTING VIRTUALIZER DIMMER DISPLAY
VOLUME
1
Press [SELECTOR] to select the CD
mode.
Every time you press the button:
CD
TAPE
TUNER AUX
1
SELECTOR
Press the numeric button(s) to select
the desired track number.
Play will start with the track you select.
To select a two-digit track
≥10] and then the two numbers you want.
Press [≥
For example
≥10]→[2]→[0]
Track no. 20: [≥
≥10]→[3]→[5]
Track no. 35: [≥
2
1
3
2
B
4
5
6
10
7
8
9
0
Repeat play and random play
Listening operations
2
by remote control only
Press [PLAY MODE] before or during play
to select the desired play mode.
Every time you press the button:
1RANDOM
Previous display
To repeat just one track:
Press [PLAY MODE] to select “1-
B
AUTO OFF SLEEP
4
5
6
10
7
8
9
0
TUNE MODE PROGRAM CANCEL PLAY MODE
SELECTOR TUNER TAPE
CLEAR
Press [PLAY MODE] to select “
PLAY
REC
3
REV MODE
To repeat all track:
CLOCK
TIMER
2
1
CD
REW
”.
”.
To start random play:
PLAY MODE
FF
Press [PLAY MODE] to select “ RANDOM ”.
All tracks on the loaded CD will be played in random order.
Playback will stop automatically when all tracks have been played.
TREBLE
BASS
To cancel repeat play and random play.
SOUND
MUTING VIRTUALIZER DIMMER DISPLAY
Press [PLAY MODE] to clear “1”, “
” and “ RANDOM ”
Pressing [OPEN/CLOSE c] also cancels repeat play and random
play.
VOLUME
1-
To repeat programmed tracks
1 Program desired tracks (steps 1 to 4 on page 14).
2 Press [PLAY MODE] to display “
”.
3 Press [CD -/ J] to begin play.
RANDOM
13
RQT5717
e10-13
13
1/17/01, 6:26 PM
CDs
AUTO OFF SLEEP
3
CLOCK
TIMER
3
4
5
6
10
7
8
9
0
TUNE MODE PROGRAM CANCEL PLAY MODE
1
SELECTOR TUNER TAPE
CD
FF
REW
CLEAR
REV MODE
Program play
PLAY
REC
2
1
by remote control only
2
5
This function allows you to program up to 24 tracks.
1
TREBLE
BASS
2
SOUND
MUTING VIRTUALIZER DIMMER DISPLAY
VOLUME
Listening operations
3
1
2
4
SELECTOR
5
Press [SELECTOR] to select the CD
mode.
(In the stop mode)
Press [PROGRAM].
Press the numeric button(s) to select
the track you want to play in the
desired sequence.
Repeat step 3 until you have
programmed all the tracks you want.
Press [CD -/ J].
Play will start in the programmed sequence.
Play will stop automatically when all the programmed tracks
have been played.
PROGRAM
For your reference
You can also select tracks for programming by pressing [g] or
[f] and [PROGRAM] instead of following steps 2 to 3.
1 Select desired tracks using the [g] or [f].
2 Press [PROGRAM].
PRGM
3
1
2
3
4
5
6
10
7
8
9
0
To cancel program play mode
• Press [PROGRAM] in the stop mode.
Programmed contents will be saved in memory.
• Press [L CLEAR] in the stop mode.
This will also erase the entire program.
Specified track number
To select a two-digit track
≥10] and then the two numbers you want.
Press [≥
A
Total play time of the programmed tracks equals, or exceeds 100
minutes.
Tracks can still be programmed and played.
PRGM
Program order
5
When “-- --:-- --” is displayed
B
When “FULL” appears
The number of programmed tracks is limited to 24. No further
tracks can be programmed.
CD -/ J
C
Check program contents.
Check to see if “P” is displayed, then press either [g] or [f].
Everytime you press one of the buttons, the track and program
No. are shown on the display.
Add to the program.
In stop mode, repeat step 3.
A
D
B
A
C
Indicates
Cancel entries
From the last
programmed track.
Press [CANCEL].
A specified track only
C Check to see if “P” is displayed, then
select the track with [ g] or [ f],
and press [CANCEL] within 3 seconds.
All tracks
Press [LCLEAR].
program mode
PRGM
Memory retention
D
AUTO OFF SLEEP
Your program is retained in memory for about 2 weeks while the
system is unplugged.
CLOCK
TIMER
1
2
3
PLAY
REC
4
5
6
10
7
8
9
0
To replay your program
TUNE MODE PROGRAM CANCEL PLAY MODE
SELECTOR TUNER TAPE
14
REV MODE
CLEAR
BASS
CANCEL
CD
REW
If you tuned OFF your program with [PROGRAM], you can play it
again as explained below.
1 Press [PROGRAM].
2 Press [CD -/ J].
FF
TREBLE
RQT5717
e14-16
14
1/17/01, 6:31 PM
Cassette tapes
1
2
1
Press [POWER
] to turn the unit on.
Insert the cassette with the exposed
tape facing left.
Tape direction is automatically set “
2
3
4
3
FWD
”
Press [TAPE2 3] to start playback.
Every time you press the button:
↔
: The forward side (front side) will play.
REV
FWD
FWD
REV
4
: The reverse side will play.
Adjust the volume.
To stop tape playback
To eject tape
Press [STOP L] then press [EJECT c].
1
One-touch play
When the system is OFF and cassette is inserted, play starts
automatically when you press [TAPE 2 3].
POWER
A
2
To select the reverse mode
by remote control only
Listening operations
Press [STOP L].
Press [REV MODE] to select the reverse mode.
Every time you press the button:
side to be played
facing up
: One side is played.
: Both sides are played.
: Both sides are played repeatedly until [
3
CLEAR] is pressed.
Cassette tape selection and care
Types of tapes which can be played correctly.
The system automatically identifies the type of tape.
PLAY
FWD
Tape direction
4
VOLUME
dB
DOWN
UP
NORMAL POSITION/TYPE I
✓
HIGH POSITION/TYPE II
✓
METAL POSITION/TYPE IV
✓
• Tapes exceeding 100 minutes are thin and can break or get caught
in the mechanism.
• Tape slack can get caught up in the mechanism and should be
wound up before the tape is played.
• Endless tapes can get caught up in the deck’s moving parts if used
incorrectly. Use tapes appropriate to this unit’s auto-reverse
mechanism.
A
AUTO OFF SLEEP
CLOCK
TIMER
PLAY
REC
1
2
3
4
5
6
10
7
8
9
0
TUNE MODE PROGRAM CANCEL PLAY MODE
SELECTOR TUNER TAPE
REV
MODE
REV MODE
CLEAR
FWD
CD
REW
FF
TREBLE
BASS
SOUND
MUTING VIRTUALIZER DIMMER DISPLAY
VOLUME
15
RQT5717
e14-16
15
1/17/01, 6:31 PM
Cassette tapes
A
A
To fast-forward or rewind the tape
Listening operations
3/FF/ f] in the stop
Press [4
4/REW/ g] or [3
mode.
FWD
B
To rewind
To fast-forward
4/REW/ g
3 /FF/ f
To find the beginning of a program
(TPS: Tape Program Sensor)
4/REW/ g] or [3
3 /FF/ f] during play.
Press [4
Press the button once for each track to be skipped (up to 9 tracks).
B
Recording operations
PLAY
Backward
Forward
4/REW/ g
3 /FF/ f
Note
TPS searches for silent parts of about 4 seconds normally found
between tunes. As a result, it may not function properly in the
following cases.
• With short silent parts.
• When noise occurs between tunes
• With silent parts found within tunes
FWD
Before recording
Types of tapes which can be recorded correctly
The system automatically identifies the type of tape.
C
Side A
Tab for side B
✓
HIGH POSITION/TYPE II
✓
METAL POSITION/TYPE IV
✕
This system cannot correctly record or erase metal position tapes.
Tab for side A
C
To re-record
Normal tape
NORMAL POSITION/TYPE I
High position tape
Erasure prevention
The illustration shows how to remove the tabs to prevent recording.
To record on the tape again, cover as shown, being careful not to
cover the high position discrimination hole.
The effect of volume, sound quality, and
sound virtualizer on recording.
Discrimination hole
These have no effect on recording.
They can be changed for playback.
D
D
4
3
To erase a recorded sound
1 Press [STOP L].
2 Press [REV MODE] on the remote control to select the reverse
mode.
3 Insert the cassette with the exposed tape facing left.
Tape direction is automatically set to “ ”.
4 Press [[REC/ J].
FWD
1
2
16
RQT5717
e14-16
16
1/17/01, 6:31 PM
Before recording
A
Preparatory steps
A
1
3
Do these steps before each recording.
Wind up the leader tape so recording can begin immediately.
(unneccessary if auto CD editing)
Preparation: Press [POWER
] to turn the unit on.
1
Insert the tape to be recorded on.
Insert with the exposed tape facing left.
2
2
Press [REV MODE] on the remote
control to select the reverse mode.
Every time you press the button:
1
: One side only records.
and
: Both sides record (forward reverse).
" automatically changes to " " when ([REC/ J)
is pressed.
"
3
side to be recorded
facing up
(unneccessary with auto editing recording, \ Page 19)
Set the tape direction.
REV
2
: To record on the forward side.
: To record on the reverse side.
To change the direction
Press [TAPE 2 3] twice and then [STOP L].
REV MODE
FWD
B
3
Recording the radio
TAPE
Preparation: Do the preparatory steps above.
PLAY
1
FWD
(\ page 10 or 11)
TAPE
2
PRGM AUTO
1-REC
1RANDOM
STOP
REV
PLAY
REC
Tune to the required station.
Recording operations
FWD
Press [[REC/ J] to start recording.
To stop recording.
FWD
Press [STOP L].
To stop recording temporarily
Press [[REC/ J].
To resume recording, press [[REC/ J].
B
by remote control only
C To reduce noise while recording an AM broadcast
(Beat proof function)
Press and hold [TUNE MODE] while recording.
Every time you press and hold the button:
BP 1 ↔ BP 2
Select the position where there is less noise.
2
TUNED ST MONO kHz MHz dB
PRGM AUTO
1-REC
1RANDOM
C
REV
PLAY
REC
FWD
TUNE MODE
AUTO OFF SLEEP
CLOCK
TIMER
PLAY
REC
1
2
3
4
5
6
10
7
8
9
0
TUNED ST MONO kHz
dB
TUNE MODE PROGRAM CANCEL PLAY MODE
SELECTOR TUNER TAPE
REV MODE
CLEAR
BASS
e17-19
PRGM AUTO
1-REC
1RANDOM
CD
REW
FF
TREBLE
17
REV
PLAY
REC
17
FWD
RQT5717
1/17/01, 6:31 PM
Recording CDs
Normal recording
5
1
1
Insert the cassette with the exposed
tape facing left.
Tape direction is automatically set to “
3
2
• Tracks are recorded in the order in which they are found on the CD.
• Tracks are cut in the middle when the end of the tape is reached.
• You can record from any point on the tape.
4
2
FWD
”
Press [REV MODE] on the remote
control to select the reverse mode.
Every time you press the button:
:
One side is recorded.
,
3
1
4
Recording operations
side to be recorded
facing up
Press [SELECTOR] to select the CD
mode.
Press [OPEN/CLOSE c] to open the
CD tray.
Insert the CD with label facing upward.
Press [OPEN/CLOSE c] to close the CD tray.
2
5
REV MODE
TUNED ST MONO kHz MHz dB
PRGM AUTO
1-REC
1RANDOM
3
REV
PLAY
REC
Press [[REC/ J] to start recording.
• If you selected “
” in step 2, the direction will automatically
change to “ ” when recording starts.
• The recording will start from the first track.
FWD
To stop recording
Press [STOP L].
The recording and the CD will stop.
SELECTOR
TUNED ST MONO kHz MHz dB
PRGM AUTO
1-REC
1RANDOM
REV
PLAY
REC
FWD
To stop recording temporarily
Press [[REC/ J].
To resume recording, press [[REC/ J].
To record on reverse side
Before recording, press [TAPE 2 3] twice and immediately thereafter [STOP L].
The tape direction will be shown as “ REV ”.
To record from a specific point on a tape
Before recording, advance the tape to the point from where you want
to start recording.
4
To record programmed tracks
OPEN/CLOSE
TUNED ST MONO kHz MHz dB
PRGM AUTO
1-REC
1RANDOM
5
REV
PLAY
REC
1 After step 4, program the track(s) you want (\ steps 2-4 on page
14).
2 Press [[REC/ J] to start recording.
FWD
REC
TUNED ST MONO kHz MHz dB
PRGM AUTO
1-REC
1RANDOM
REV
PLAY
REC
FWD
Tape direction
18
RQT5717
e17-19
18
1/17/01, 6:32 PM
Recording CDs
A
2
4
3
You can record the whole CD (AUTO-REC) or a selected track (1REC). If a track is interrupted at the end of the side facing up, it is
recorded again on the side facing down.
A
Recording begins from the side facing up and the reverse mode is
set to “ ”.
Preparation: Insert a CD (\ page 12)
1
1
2
SELECTOR
Press [SELECTOR] to switch to CD
mode.
Press [CD EDIT] so “AUTO-REC” is
displayed.
Every time you press the button:
AUTO-REC
2
3
CD EDIT
TUNED ST MONO kHz MHz dB
PRGM AUTO
4
1-REC
OFF
Insert the tape with the exposed tape
facing left.
Press [[REC/ J] to start recording.
The unit rewinds the tape, records 10 seconds of silence, and
then starts recording.
3
To stop recording
side to be recorded
facing up
Press [STOP L]. The CD also stops.
To record selected tracks.
4
1 Program tracks (\steps 1 to 3 on page 14).
2 Do steps 2 to 4 above.
REC
Note
Auto edit recording cannot be used with random and repeat play. (\
page 13).
B
2
4
1
B
One track edit recording (1-REC)
Preparation:
Insert a CD (\ page 12) and a cassette.
Wind the tape to where you want to start recording.
1
3
2
1
Recording operations
1
Auto editing recording (AUTO-REC)
3
SELECTOR
4
Press [SELECTOR] to switch to CD
mode.
Press [CD EDIT] so “1-REC” is displayed.
4/REW/ g] or [3
3/FF/ f] to
Press [4
select the track you want to record.
Press [[REC/ J] to start recording.
CD play and recording start at the same time.
2
CD EDIT
To stop recording
TUNED ST MONO kHz MHz dB
PRGM AUTO
1-REC
1RANDOM
3
4
REW
FF
REV
PLAY
REC
FWD
Press [STOP L]. The CD also stops.
To continue recording from another CD
1 Press [OPEN/CLOSE c] and insert the other CD.
2 Do steps 3 and 4.
To record a track while it is being played.
1 Press [CD EDIT] so “1-REC” is displayed.
2 Press [[REC/ J].
Recording starts from the beginning of the track and stops when
the track finishes.
REC
19
RQT5717
e17-19
19
1/17/01, 6:32 PM
Changing the sound quality
A
AUTO OFF SLEEP
by remote control only
CLOCK
TIMER
1
2
3
PLAY
REC
4
5
6
10
7
8
9
0
The tone level can be varied within a range of -6 to +6.
TUNE MODE PROGRAM CANCEL PLAY MODE
SELECTOR TUNER TAPE
REV MODE
– BASS +
CLEAR
CD
FF
REW
TREBLE
BASS
– TREBLE +
SOUND
MUTING VIRTUALIZER DIMMER DISPLAY
MUTING
VOLUME
To adjust the tone quality
A
SOUND
VIRTUALIZER
Press [BASS (– or +)] to adjust the low-frequency
sound.
Press [TREBLE (– or +)] to adjust the high-frequency
sound.
Note
The effect works only with playback. It cannot be used in recording.
Hints
Place speakers on stands (not included) to reproduce clearer lowrange sounds.
Using the “live” effect (SOUND
VIRTUALIZER)
BASS
B
The sound virtualizer leaves middle-range sounds such as vocals
clear and gives natural width and depth to music.
Sound virtualizer is effective with stereo sound.
TREBLE
Press [SOUND VIRTUALIZER] to display “
”.
To cancel
Timers and others
B
Press [SOUND VIRTUALIZER] to clear the “
”
indicator.
• When listening through headphones, the effect is less discernible
than through the unit’s speakers.
• If interference in FM stereo reception increases, cancel the sound
virtualizer effect.
SOUND
VIRTUALIZER
C
MHz
C
Using an external unit
Listening to an external source
REC/II
POWER
(See page 7 for external unit connection.)
] to turn on the unit.
1 Press [POWER
2 Press [SELECTOR] to select “AUX”
Every time you press the button:
CD
AUX
TAPE
TUNER
3 Start playback from the external source.
equipment’s operating instructions.)
(Refer to your
Recording from an external source
SELECTOR
1
2
3
4
D
Follow steps 1-2 on page 17.
Press [SELECTOR] to select “AUX”.
Press [[REC/ J] (recording starts).
Start playback from the external source. (Refer to your
equipment’s operating instructions.)
D
Headphone
(not included)
Top of the unit
Listening with headphones
Reduce the volume level, and connect the headphones.
Plug type: 3.5 mm (1/8˝)stereo.
Note
Avoid listening for prolonged periods of time to prevent hearing
damage.
20
RQT5717
e20-22
20
1/17/01, 7:09 PM
Using the timers
5
4
AUTO OFF SLEEP
PLAY
REC
3
4
5
6
10
7
8
9
0
by remote control only
The timer has two functions. It can be set to on at a certain time to
wake you up, or it can be set to record the radio or from the aux
source.
The play timer cannot be used in combination with the record timer.
TUNE MODE PROGRAM CANCEL PLAY MODE
SELECTOR TUNER TAPE
REV MODE
CLEAR
CD
REW
2,3
FF
TREBLE
BASS
Using the play/record timer
1, 2, 3
CLOCK
TIMER
2
1
SOUND
MUTING VIRTUALIZER DIMMER DISPLAY
Preparations
• Turn the unit on and set the clock (\ page 9).
• For the play timer, prepare the music source you want to listen to;
tape, CD, radio or aux, and set the volume.
• For the record time, check the cassette’s erasure prevention tabs
(\ page 16: C ) insert the tape, select the reverse mode (\ page
17) and tune to the radio station (\ page 10) or select the aux
source (\ page 20).
VOLUME
1
CLOCK/
TIMER
SLEEP
PLAY
ON
SLEEP
PLAY
ON
1
Press [CLOCK / TIMER] to select the
timer function.
Every time you press the button:
CLOCK
2
PLAY
REC
Previous display
4/REW
g
3/FF
f
˚PLAY : to set the play timer
˚REC : to set the record timer
Setting the start and finish times
REC
ON
ON
2
CLOCK/
TIMER
3
3
4/REW
g
(Within 8 seconds or so)
1 Press [g,4
4/REW] or [f,3
3 /FF]
to select the starting time.
2 Press [CLOCK / TIMER].
1 Press [g,4
4/REW] or [f,3
3 /FF]
to select the finishing time.
2 Press [CLOCK / TIMER].
Timers and others
PLAY
The start and finish times are now set.
3/FF
f
Turning the timer on
PLAY
OFF
REC
OFF
4
˚PLAY/REC].
Press [˚
Every time you press the button:
PLAY
REC
(OFF)
˚PLAY : to turn the play timer on
˚REC : to turn the record timer on
CLOCK/
TIMER
5
Press [ ] to turn the unit off.
The unit must be off for the timers to operate.
4
PLAY/
PLAY
˚ REC
REC
• For play timer
The timer play will start at the preset time and volume level
you preset.
• For record timer
About 30 seconds before the set time, the system mutes
sound automatically and starts recording.
To cancel the timer
˚ PLAY/REC] to clear the timer indicators from the display.
Press [˚
The timer comes on at the set time everyday if the timer is on.
5
To change the settings (when unit is on)
• To change the play/record times
Do steps 1, 2, 3, and 5.
• To change the source or volume.
1 Press [˚
˚ PLAY/REC] to clear the timer indicator from the display.
2 Make changes to the source or volume.
3 Do steps 4 to 5.
(Continued on next page)
e20-22
21
1/17/01, 7:09 PM
21
RQT5717
Using the timers
A
AUTO OFF SLEEP
CLOCK /
TIMER
PLAY/
REC
CLOCK
TIMER
1
2
3
PLAY
REC
4
5
6
10
7
8
9
0
REV MODE
CLEAR
by remote control only
Press [CLOCK/ TIMER].
˚PLAY” or
(While the unit is on, press [CLOCK/ TIMER] to select “˚
˚REC”.)
“˚
The timer conditions are shown in the following order.
start time → finish time → source → volume (Play timer only)
CD
FF
REW
TREBLE
BASS
Using the play/record timer
Checking the timers
TUNE MODE PROGRAM CANCEL PLAY MODE
SELECTOR TUNER TAPE
A
SOUND
MUTING VIRTUALIZER DIMMER DISPLAY
VOLUME
Playing the unit after the timers are set
B
SLEEP
AUTO OFF SLEEP
CLOCK
TIMER
1
2
3
PLAY
REC
4
5
6
10
7
8
9
0
Note
• If you turn the unit off and on again while a timer is functioning, the
finish time setting will not be activated.
• If the unit is on, the timer will not function. The unit must be in the
standby mode.
• If AUX is selected as the source, when the timer comes on, the
system turns on and engages AUX as the source. If you want to
playback or record from a connected unit, set the other unit’s timer
to the same time. (See the other unit’s instruction manual.)
TUNE MODE PROGRAM CANCEL PLAY MODE
SELECTOR TUNER TAPE
REV MODE
CLEAR
CD
FF
REW
TREBLE
BASS
The unit can be used after the timers are set.
Check the following before turning the unit off again.
If playing tapes or making a recording:
Reset tape direction.
If playing disc:
Make sure the desired disc is selected.
SOUND
MUTING VIRTUALIZER DIMMER DISPLAY
VOLUME
B
Using the sleep timer
Timers and others
by remote control only
This timer turns the unit off after a set time.
While enjoying the desired source:
SLEEP
SLEEP
PLAY
ON OFF
Press [SLEEP] to select the desired time.
Every time you press the button:
30
60
90
120
OFF
C
AUTO OFF SLEEP
CLOCK
TIMER
1
2
3
PLAY
REC
4
5
6
10
7
8
9
0
PLAY/
REC
TUNE MODE PROGRAM CANCEL PLAY MODE
SELECTOR TUNER TAPE
REV MODE
CLEAR
To confirm the remaining time
(only while unit is ON)
Press [SLEEP].
CD
REW
To change the time remaining during operation
Press [SLEEP] to show the remaining time, and then press [SLEEP]
to select the desired time.
FF
TREBLE
BASS
To cancel the sleep timer
Press [SLEEP] to select “OFF”.
SOUND
MUTING VIRTUALIZER DIMMER DISPLAY
VOLUME
Notes
The play and sleep timer or the record and sleep timer can be used
together.
The sleep timer always has priority. Be sure not to overlap timer
settings.
C
The Timer Fader
by remote control only
FADER
Volume increases slowly to the set level when the play timer turns
the unit on and decreases slowly when the sleep timer turns the unit
off.
Press and hold [˚
˚PLAY/REC] to display
“ FADER ”.
(All timers will be affected.)
Press and hold again to cancel.
Note
This feature does not affect record timer’s recordings.
22
RQT5717
e20-22
22
1/17/01, 7:09 PM
Troubleshooting guide
Before requesting service, make the below checks. If you can’t fix the system as described below, or if something not listed here occurs, refer to
the enclosed directory to locate an Authorized Service Center convenient to you or contact your dealer.
For detailed instructions, contact an authorized servicenter in the U.S.A. and Panasonic Canada Inc. Customer Care Centre in Canada.
In the U.S.A., call 1-800-211-7262, e-mail [email protected], or visit www.panasonic.com
In Canada, call 905-624-5505 or visit www. panasonic.ca
Reference pages are shown as black circled numbers
6.
Common Problems
No sound.
Turn the volume up.
The speaker cords may be shorted. Turn the unit off, check and correct the connections and turn the
unit on.
Sounds unfixed, reversed or
come from one speaker only.
Check the speaker connections.
Humming heard during play.
An AC power supply cord or fluorescent light is near the cables. Keep other appliances and cords
away from this unit’s cables.
Incorrect operation performed. Read the instructions and try again.
6
“ERROR” is displayed.
6
9
“- -:- -” appears on the display.
You plugged the AC power supply cord in for the first time or there was a power failure recently
Set the time.
“F61” is displayed.
Check and correct the speaker cords correction.
If this does not fix the problem, there is a power supply problem. Consult the dealer.
Listening to the radio
7
Noise is heard.
The stereo indicator flickers or
doesn’t light.
Sound is distorted.
Use an outdoor antenna.
A beat sound is heard.
Turn the TV off or separate it from the unit.
A low hum is heard during AM
broadcast.
Separate the antenna from other cables and cords.
The picture on the TV disappears
or stripes appear on the screen.
The location and orientation of the antenna are incorrect. If you are using an indoor antenna,
change to an outdoor antenna.
The TV antenna wire is too close to the unit. Separate the antenna wire of the TV set from the unit.
Playing cassette tapes
ê
Poor quality sound.
Clean the heads.
Recording is not possible.
If the erasure prevention tabs have been removed, cover the holes with adhesives tape.
Reference
When there is a television set nearby
Ü
Playing discs
Ç
The display is wrong or play
won’t start.
The disc may be upside down.
Wipe the disc.
Replace the disc if it is scratched, warped, or nonstandard.
Condensation may have formed inside the unit due to a sudden change in temperature. Wait about
an hour for it to clear and try again.
“TAKE OUT/DISC” appears on the
display.
There is a problem with the disc mechanism. (A power failure may have occurred.)
The tray will open automatically. Remove the disc from the tray, and after ensuring there is no disc
in the tray, close it. The unit will make the disc changing noises for a few moments and then it
should operate normally.
Only one track from the CD is
recorded
Press [CD Edit] to cancel one track edit recording and to select the required mode (AUTO-REC or
OFF).
â
The remote control
Remote control doesn’t work.
Check the batteries are inserted correctly.
Replace the batteries if they are worn.
5
23
RQT5717
e23-28
23
1/17/01, 6:41 PM
Reference
Servicenter List (U.S.A.)
24
RQT5717
e23-28
24
3/25/05, 1:42 AM
Warranty (U.S.A.)
ONLY FOR U.S.A.
Panasonic Sales Company, Division of Matsushita Electric
Corporation of Puerto Rico, Inc.
Ave. 65 de Infanteria, Km. 9.5, San Gabriel Industrial
Park, Carolina, Puerto Rico 00985
Panasonic Consumer Electronics Company,
Division of Matsushita Electric Corporation
of America
One Panasonic Way,
Secaucus, New Jersey 07094
Panasonic/Technics Audio Products
Limited Warranty
This warranty only covers failures due to defects in materials and workmanship which occur during normal use and does not cover normal wear
to the stylus (when applicable) or a dealer installed cartridge or stylus. The
warranty does not cover damages which occur in shipment or failures
which are caused by products not supplied by the warrantor, or failures
which result from accident, misuse, abuse, neglect, mishandling, faulty installation, misapplication, set-up adjustments, maladjustment of consumer
controls, improper operation or maintenance, improper antenna, inadequate signal reception or pick-up, alteration, modification, power line surge,
improper voltage supply, lightning damage, commercial use, such as; hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a PASC Factory Servicenter or a PASC authorized Servicenter, or damage that is attributable to acts of God.
LIMITS AND EXCLUSIONS
There are no express warranties except as listed above.
THE WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY,
INCLUDING WITHOUT LIMITATION, DAMAGE TO TAPES, RECORDS
OR DISCS. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING
THE WARRANTIES OF MERCHANTABILITY, AND FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO THE APPLICABLE
WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the
exclusion or limitation of incidental or consequential damages, or
limitations on how long an implied warranty lasts, so the above exclusions
or limitations may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
If a problem with this product develops during or after the warranty
period, you may contact your dealer or Servicenter. If the problem is not
handled to your satisfaction, then write to the Consumer Affairs Department at the company address indicated above.
If you ship the product
Carefully pack and send it prepaid, adequately insured and preferably in the original carton.
Attach a postage-affixed letter, detailing the complaint, to the outside of the carton.
Reference
Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively referred to as “the warrantor”) will repair this product with
new or refurbished parts in the event of a defect in materials or workmanship, free of charge, in the U.S.A. or Puerto Rico as follows (all time
periods start from the date of original purchase):
COMPACT DISC PLAYERS, DIGITAL VERSATILE DISC PLAYERS, RADIOS, RADIO CASSETTE PLAYERS/RECORDERS (with and without CD
Players), CASSETTE RECORDERS, MICROCASSETTE RECORDERS/
TRANSCRIBERS, IC RECORDERS, RECEIVERS, TUNERS, AMPLIFIERS, SUBWOOFER AMPLIFIERS, TURNTABLES, CASSETTE DECKS,
AUDIO PROCESSORS, EQUALIZERS, AUDIO MIXERS, REMOTE CONTROLS, HOME THEATER SYSTEMS (receiver/amplifiers, speakers),
RACK SYSTEMS (receivers, tuners, amplifiers, cassette decks, CD players, equalizers, rack system speakers, EXCLUDING; audio racks)—labor
and parts for one (1) year.
ALL AUDIO RACKS (cabinets)—parts only 30 days.
TECHNICS STAND ALONE SPEAKERS, SUBWOOFER SPEAKERS—
labor and parts for three (3) years.
ACCESSORIES—HEADPHONES, CARTRIDGES, MICROPHONES,
ADAPTERS—labor and parts for ninety (90) days.
BATTERIES—(when applicable)—New rechargeable batteries in exchange for defective rechargeable batteries for ten (10) days. Nonrechargeable batteries are not warranted.
RECHARGEABLE BATTERY PACKS—(when applicable)—New rechargeable battery packs in exchange for defective rechargeable battery
packs for ninety (90) days. Non-rechargeable battery packs are not warranted.
Carry-in or mail-in service in the U.S.A. can be obtained during the
warranty period by contacting a Panasonic Services Company (PASC)
Factory Servicenter listed in the Servicenter Directory. Or call toll free,
1-800-211-7262 to locate a PASC authorized Servicenter. Carry-in or mailin service in Puerto Rico can be obtained during the warranty period by
calling the Panasonic Sales Company telephone number listed in the
Servicenter Directory.
This warranty is extended only to the original purchaser. A purchase
receipt or other proof of date of original purchase will be required before
warranty service is rendered.
Do NOT send the product to the Executive or Regional Sales offices. They are NOT equipped to make repairs.
Customer’s Record
Model
No.
Dealer’s
Name
Serial
No.
or
Code
No.
Dealer’s
Address
Date
of
Purchase
25
RQT5717
e23-28
25
1/17/01, 6:42 PM
Specifications
AMPLIFIER SECTION
CD SECTION
Power output
1% Total harmonic distortion
30 Hz–160 Hz, both channels driven
(Low channel) 9 W per channel (6Ω)
160 Hz–20 kHz, both channels driven
(High channel) 4 W per channel (6Ω)
Total Bi-Amp power
13 W per channel
Input sensitivity
AUX
250 mV
Input impedance
AUX
47 kΩ
Output impedance
Headphone
16-32Ω
Sampling frequency
Decoding
Beam source/wave length
Number of channels
Wow and flutter
Digital filter
D/A converter
FM TUNER SECTION
Frequency range
87.9–107.9 MHz (200 kHz steps)
87.5–108.0 MHz (100 kHz steps)
1.8 µV (IHF)
1.5 µV
75Ω (unbalanced)
Sensitivity
S/N 26 dB
Antenna terminal(s)
Frequency range
AM
Sensitivity
AM
S/N 20 dB (at 999 kHz)
520 – 1710 kHz (10 kHz steps)
Type
Speaker(s)
Superwoofer
Full range
Impedance
Input power
Output sound pressure level
Cross over frequency
Frequency range
Mass
Track system
Heads
Record/playback
Erasure
Motor
Recording system
Erasing system
Tape speed
Frequency response
(+3 to -6 dB at DECK OUT)
NORMAL (TYPE I)
HIGH (TYPE II)
S/N
Wow and flutter
Fast forward and rewind times
4 track, 2 channel
Solid permalloy head
Double gap ferrite head
DC servo motor
AC bias 100 kHz
AC erase 100 kHz
4.8 cm/s
10 cm (315/16˝) cone type
8 cm (31/8˝) cone type
High (6Ω), Low (6Ω)
High 10 W (Music)
Low 35 W (Music)
86 dB/W (1.0 m)
110 Hz
55 Hz–25 kHz (–16 dB)
75 Hz – 22 kHz (–10 dB)
140 x 240 x 213 mm
(51/2˝ x 97/16˝ x 83/8˝)
2.3 kg (5.1 lb)
Power supply
Power consumption
Standby
Dimensions (WxHxD)
Mass
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
If the surface are extremely dirty, use a soft cloth dipped in a soapand-water solution or a weak detergent solution.
• Never use alcohol, paint thinner or benzine to clean this unit.
• Before using chemically treated cloth, read the instructions that
came with the cloth carefully.
For a cleaner crisper sound
Clean the heads regularly to assure good quality playback and
recording.
Use a cleaning tape (not included).
Notes:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Product Service
Do not attempt to remove the cover(s) or repair the unit yourself.
Refer servicing to qualified personnel only.
Product information
For product service, product information or assistance with product
operation, refer to the servicenter directory.
In the U.S.A., contact the Panasonic Customer Call Center at
1-800-211-7262, or e-mail [email protected],
or web site (http://www.panasonic.com).
In Canada, contact Panasonic Canada Inc. Customer Care
Centre at 905-624-5505, web site (www.panasonic.ca), or an
authorized Servicentre closest to you.
26
RQT5717
26
AC 120 V, 60 Hz
64 W
0.6 W
180 x 241 x 318 mm
(7 3/32˝x 9 1/2˝ x 12 1/2˝)
4.6 kg (10.1 lb)
50 Hz – 13 kHz
50 Hz – 13 kHz
52 dB (A weighted)
0.18% (WRMS)
Approx. 120 seconds with
C-60 cassette tape
Maintenance
e23-28
2 way speaker system
GENERAL
500 µV/m
CASSETTE DECK SECTION
Reference
SPEAKER SECTION
Dimensions (WxHxD)
AM TUNER SECTION
44.1 kHz
16 bit linear
Semiconductor laser/780 nm
Stereo
Below measurable limit
8 fs
MASH (1 bit DAC)
3/25/05, 4:38 AM
Reference
Memo
27
RQT5717
e23-28
27
3/24/05, 10:37 PM
Reference
28
Panasonic Consumer Electronics
Company, Division of Matsushita
Electric Corporation of America
Panasonic Sales Company,
Division of Matsushita Electric of
Puerto Rico, Inc. (“PSC”)
One Panasonic Way Secaucus,
New Jersey 07094
http://www.panasonic.com
Ave. 65 de Infantería, Km. 9.5
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985
Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3
www.panasonic.ca
RQT5717-2Y
© 2001 Matsushita Electric Industrial Co., Ltd.
Printed in Malaysia
L0101KL2071
RQT5717
e23-28
28
En
3/24/05, 9:32 PM

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement