Panasonic SUV650 Operating Instructions

Add to My manuals
12 Pages

advertisement

Panasonic SUV650 Operating Instructions | Manualzz
er Technics
Stereo Integrated Amplifier
— SU-VE50
E. OPERATING INSTRUCTIONS
Notes:
e Specifications differ according
sThe "EK" area code, for example, indicates United Kingdom specifica-
tions.
to the area code.
¢The "EK" indication is shown on the packing case and serial number
em tag.
Before operating this unit, please read these instructions completely.
— tó welcome vou Yo The gr growng family ©
¿Technics product owners around he woe -
_ we fes Г certain ain you w wil ! MAXIMUM € enjoymen
> Suggestions for: Safety .
enccessories ...............
For United Kingdom .
“sPlacement Hints e...
EEE tres e
= A EN
= =".
“eConnections e.
- eFront Panel Controls ar an
"For United Kingdom... I
The “EK" indication is shown on the name plate.
important
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE.
BLUE: NEUTRAL
BROWN: LIVE
As the colours of the wires in the mains lead of this unit may not
Placement Hints
№ Placement on top of other equipment
To accommodate equipment of different depths, use the addi-
tional feel (included) io support this uni,
Disconnect the unit from AC mains before attempting this
procedure.
Note:
Before appiying the feat, wine the bottom surface of this unit with
cloth to remove any dirt.
correspond with the coloured markings identifying the terminals
in your plug, proceed as follows. The wire which is coloured
BLUE must be connected to the terminal which is marked with
the letter N or coloured BLACK
The wire which is coloured BROWN must be connected to the
termina! which is marked with the tetter L or cotoured RED.
Bottom of this
Suggestions for Safety
E Use a standard electrical AC wall outlet
1. Use from an AC power source of high voltage, such as for
mir conditioners, is very dangerous.
Be extremely careful not to make a connection to the
electrical outlet for a large air conditioner or central-heating
unit which uses high voltage, because there is the possibility
of fire.
A DC power source cannot ba used.
Be sure ta chack the power source carefully, especially on a
ship or other place where DC is used,
1
plug
i. Wet hands are dangerous.
A dangerous electric shock may result if the plug is touched
_.- by wet hands.
= Don't pull the power cord.
— Always grasp the plug: never pull the cord itself.
- EH Never attempt to repair or reconstruct this
- unit
A serious electric shock might occur if this unit is repaired,
disassembled or reconstructed by unauthorized persons, or if.
E For families with children
Never permit children to put anything, especially metal, inside
this unit. A serious electric shock or malfunction ¢ould occur if
mime mas A MINO AAN eures ales ara Iearta
ELL LIL.1 67 3 Ei Gad Mr LR La ти, IFA РМ ЧЕ ей, ALLA. CRED A LF
through the ventilation holes, etc. of this unit.
If water Is spilled on the unit
extremely careful if water is spilled on the unit, because a fire
serious electric shock might occur. Immediately disconnect
thé power cord plug, and consult with your dealer.
e
SF
HB Place the unit where it will be well ventilated,
and away from direct sunlight
Place this unit at least 10 cm (4) away from wall surfaces, etc.
and away from direct sunlight. Be careful that curtalns and
similar materiais do not obstruct the ventilation holes.
E Keep the unit away from heaters, etc.
Heat can damage the external surfaces as well as internal
circuits and components,
E Be sure to place the unit on a flat, level surface.
If the surface is inclined. a malfunction may result.
E Avoid spray-type insecticides
Insecticides might cause cracks or “cloudiness” in the cabinet
and plastic parts of this unit. The gas used in such sprays might,
moreover, be ignited suddenly.
E Never use alcohol or paint thinner
These and similar chemicals should never be used, because
they may damage the finish.
M Turn off after use
If the unit is left for a long time with the power on, this will not only
shorten its useful operation life, but may also cause other
unexpected troubie.
Elf trouble occurs
if, during operation, the sound is interrupted or indicators no
longer illuminate, or if abnormal odor or smoke is detected,
immediately disconnect the power cord plug, and contact your
dealer or an Authorized Service Center,
ctio
me . 7 Cófiecra compac! disc playér.
== оные са. q Ey BE es a Sh EA ME SR SAT Re a
IAE - Zar 1 5E = PLE A AECA AA
Tom
H—— Stereo connection es
cables (option)
~~ ~~ A
(A) (1) (1) (A) (5) (8)
— “PHONO” terminals
Connect a turntable. Stereo connection SE ==
/ cabie (option)
= (R} (L)
a. } | | os a
= tur PUT : EE 2 FE se нЕ
Turntable (option) GND
nn) at ire AE
Ta WEIR RT ES
Ground wire (option)
RECO E Te ——
“TUNER” terminals | = нЕ
. (A) (1) (A) (E) (А) (=
Connect a tuner (R) (E) No > 0
= =
Tuner (option) N
“AUX terminals 4
Connect a video disc player etc. These terminals are audio > connection
playback only. | Stereo
Ш
== AUDIO OUT VIDEO OUT -
Video disc player (option)
Speaker connection у
2 — -— а"
cords (option)
ee Household ~For United Kingdom —
AC outlet
fo [TN Household
== AC outlet
© TN
— |
DIT : F ta suitable
« plug to tte AC
i
az =
AC power : power supply я
supply cord [cora ===
{inctuded) ; . tr ; :
a - ED
q a ИТ му зе Нк ТО.
The configuration of the AC MI Load impedance:
outlet and AC power supply MAIN and REMOTE : 8-160
cord differs according to MAIN or REMOTE :@ 4--16Q
area.
This unit
“SPEAKERS” terminals
ΠConnection of speaker wires
fun an
3
ни 4 Gtrin off the ar cnoyerina ami Let tas Amar
= CO na jr = RO NINA REE RIA NV RIN DE Tigo CAN INÓ ANY EOL LT IL
zu} й conductor.
= еж nn >> _{
— Y [|
10 mm {13/327 Twist
2. Turn 5 or 6 times.
a 3. Insert wire and tighten screw completely. Pull the wire
EE to assure a proper connection.
a TE —— “|
re 2/EXT" terminals
Motes:
Connect a graphic equalizer or a second tape deck. etc. 1. To prevent Jamageto circuitry. never short plus (—}anc
LL minus (—) speaker terminals.
ne Exa
(R) (L) (R)(L)
2. Be sure to only connect positive (+) cards tc positive
AL RL) I) terminals. and negative (—) cords to negative (—)
DER am Tape deck 2 (option) ;
LL TA AI AL | = й
E ACMUIC erminais
Connection to second pair of speakers.
= Xela
eSubsonic fi iter switch (subsonic Filter =
Sta E Cl bm Balm еле me Eno nv
«Operation Indicators (amplifler r operation monitor) - —
Thie indira¥nr Muminales fo indicate the operating condition ni ‘thie unit TU meee Ee TT TS a Dan -
| TETE FN (mr a — — A E art Le, In = a TE A a TEE — ==
“Voltage control:
== o Wren the power is swi теней ©
a aes EE
pani SE pd pas RE RL AAA
—*Wiien the power is swifcl ed ÓN, This indicator ıluminates after about 4 seconds when tha vil je
qui If an abnormal condition in the. circuitry is detecied, such 2 Lage: in
re = Go a LEAD коже! = E ет TTL ae a A
af} and neaati T Ч min e sogaker terminals, The tec
-Muminiate. tf this occu 5,5 wi ich Fs po ich Ihe pow wer ГОРЕ, | fing
orice again. В
Zi
Hr
— eTone controls (bass/treble) — — =
“The bass control is for the low-frequency sounc sound range.
arid {he treble control is for the high-frecuency sound —
range.
Ea
ePower switch (power)
e Tone contro! switch (tone control)
This switch is used to switch the tone control тот
circuit (bass, treble} ON or OFF.
defeat (=... E): _ —
Set ta this position to turn the bass/treble tone —— _
control circutt off. Regardiess of the positions of —
the bass/trebie tone controls, the e ——
characteristics wili remain flat. i
on(E_ =): ¡E =
Set lo this position to adjust the tone quality by THEI -
using the tone controls. EII |
|
| eRecording output selector (rec selector)
This selector is used to select the signal to be recorded |
connected tape deck.
e Headphones lack (phones) por ма: =Ssilion to recard From lane deck 1 10 tana de
- ъ r 7078 LS LES ЛОВЛИ #6) QUAIL FAT LEY UCA 1 ILE De
tape 251:
Set to this position to record from tape deck 2 to tape de
eSpeaker selectors (speakers) 7 ps
These selectors are used to switch the speaker systems ON and OFF. Set to this position to record the signals from equipment
main on (KL _ =): ede AUX" terminals,
Sound can be heard from the speakers connected to the "MAIN" terminals, "
remote on (E... a): Р ° as Set to this position to record from a compact disc.
Sound can be heard from the speakers connected to the "REMOTE" terminals. tuner: |
Set to this position to record from radio broadcasts.
phono:
Set to this position to record from phono discs
* Loudness switch (loudness)
Set to the "on" position when listening to music at a low volume. Auditory perception of sound in the low
frequency range falls off at low volume, but when the switch is in this position, this deficiency is
была ВВ far an that tha fall immart af tha miitiÑal nararmanrao &Aan ha anınvan
E E UL ей ый =
¢ Phono selector {phono selector)
This selector should be set to the position which corresponds to the type of cartridge used on the
turntable.
MM (+ ... E):
Set to this position when using a moving-magnet type cartridge ar high-output moving-coil
cartridae (1 mV or mora).
MC(M_ =}:
Set to this position when using a moving-coil type cartridge {less than 1 mV).
Nr * Compact disc direct-tirough —
O o switch (CD direct)
Even better tone quality of the very high quality
signais from a compact disc can be obtained by
routing these signals directly to the volume level
adjustment. without passing them through an input
selector.
= When this switch is set to the "on" position, the
ee MU a E sound source selected by the input selectors
— —— = cannot ce heard.
pi
ét bi
exe CARE Do! ATI ARTS EE
` wl tai go mm
Volume control (volume)
This control is used to adjust the volume level.
Be absolutely sure to set this control to a low _
position (*‘0— 1") before switching the power
ON. After the power is switched ON, please wai
several seconos before increasing the volume
level.
Input selectors/indicators (Input selector) Recording output indicators
Press to select the sound source to be listened.
в The corresponding indicator illuminates during operation to indicate the (recording selector)
selected sound source. These indicators indicate the program source which can
tape 1/DAT: be recorded.
Press this button to playback or monitor the sound of a tape deck or Each indicator lights up corresponding with the selected
: other equipment connected to the "TAPE 1/DAT" terminais on the position of the recording output selector.
т rear panel.
- tape 2/ext:
Press this button to play back or monitor the sound from a tape deck
connected to the TAPE 2/EXT” terminals on the rear panel.
AUX:
Press this button to listen to sound from a video disc player or
other equipment connected to the “AUX” terminals on the rear panel.
CD:
Press this button to listen to a compact disc.
= tuner:
; Press this button to listen to radio broadcasts.
nhnna:
Time =
Press this button to listen to phono discs.
Ï
+
1
! |3
pi
|
SUR TE Y
= Operation _
о
A
J
—— TEE ay pny ma — === ===> ew AA — wm
“on” > =)
Be sure to reduce the volume ¡eve! to a low position before
switching ON me power.
Select the speaker systems to be
used.
Headphones (option)
Plug type:
“a-inch phone plug,
stereo type
If sound from speakers is not
wanted set tha speaker selectors to
the “off” position.
Note: Set volume contro! to the
Minimum (07) position before
connecting headphones.
Ee —
Aîter disc play or radio broadcast, егс.
E 35 ВЕН ilu
etc.).
| bass range).
“off” (=.. E)
For direct compact disc
Ustening, however, press in to
Select the program source.
tane 1/DAT:
Press this button tc piayback cr monitor the sound of a tape
deck or other equipment connected to the "TAPE 1:DAT”
terminals on the rear panel.
tape 2/ext:
Press this button to playback or monitor the sound from
a tape deck connected to the "TAPE 2/EXT" terminals on
ine rear panel.
aux:
Press this button to listen to sound from a video disc
player or other equipment connected to the ‘AUX’
terminals on thea rear panel,
CD:
Press this button ta listen to a compact disc.
tuner:
Press this button to listen to radio broadcasts.
phono:
Press this button to listen to phono discs.
Operate each component.
(Refer to the operating instructions for the other equipment
used.)
Adjust the volume level and the tone quality.
o Adjust the tone guality.
~ Suggestions
r Adjust left/right volume balance.
Вий]
т
1
i Я
от
Jp
|
1 A
“|
tone quality Select either “MM
> Press iiward to the ‘20 Hz" position to eliminate
uitra-low-fraquency noise (turntable motor “rumble”,
Press inward to the ‘on’ position when listening to
[music at a low volume leve! (for compensation of thea
“MC” when
listening to phono
discs,
“on”
if sel to the “delsal”
position, tone controls
have no effect, and
frequency response
Fh a no, ne its Fa
SEAT 1184E_
disc player and turntatble.
or regular phono disc.
\.
elf noise is very annoying while listening to an FM or AM
broadcast, switch OFF the video disc player. compact-
*Switch OFF the video disc player power if noise is
excessive while listening to an audio tape, compact disc
After listening is finished, power switches of all equipment
should be switched OFF.
terminalis.
1 Note:
ecor no Tape deck 1 is the tape deck connected to the "TAPE 1/DAT”
1
Tape deck 2 is the tape deck connected to the "TAPE 2/EXT"
termirais.
“on” (A =)
Be sure to reduce the volume level to a low
position before switching ON the power.
Select the desired program source for recording.
(The recording output indicator will illuminate.)
Tape-to-tape recording
If two tape decks are connected to
this unit, recording can be made
from one deck to the other.
To record :
Select the speaker record front tape deck 1 to 2
Set to the “tape 12?” position.
= systems to be used. *To record from tape deck 2to 1;
Set to the "tape 2H» 1" position.
4 “off” (=.. E)
Recording output indicator
Set to the position corresponding —— o Start the desired program source.
to the program source to be heard. Refer to the operating instructions for the optional
(One of the input indicators will illuminate.) equipment used.
elf the program source being recorded is selected:
The sound going to the tape deck will be heard.
elf the tape deck making the recording is selected
(tape monitor):
The sound going through the tape deck will be heard.
elf some other sound source is selected: Begin recording.
The sound of the selected source can be heard. By using the controls on the tape deck, adjust the
(This will not effect the recording which is being made.) recording level. Then begin recording.
т
Г,
aa
Ca
TT Er
' 1 1"
"
=
==
Technical Specifications
(DIN 45 500)
HM AMPLIFIER SECTION
2 > BSW (ET;
Total harmonlic distortion
rated power ait 20 Hz--20 kHz 0.302% (811)
rated power at 1 kHz 0.005% (40)
0.009% (802)
half power at 20 Hz—20 kHz 0.002% 300)
half power at 1 kHz commis
0.0008% (NT
intermodulation distortion -
rated power at 50 Hz: 7 kHz—4:1, SMPTE, 81 0,005%
Power bandwidth
both channels driven, -3 dB
‚80 (46) 80 (89) _
5Hz~50kHz (BQ, 003%} =
_.__ Residual hum and nolse TEM >
— Damping factor
“Input sensitivity and impedance
59 mW power (49)
PHÓNO MM Ш 6246
ur 61 45
TUNER, CD, AUX, TAPE 1' DAT u
Frequency response
PHONO RIAA standard curve
In +0.8 48 (30 Hz - 15 kHz)
TUNER, CD, AUX, I
TAPE 1/DAT, TAPE 2/EXT 3Hz 190kHz( 3 dB;
о | +0. 0.2 dB (20 Hz - 20 kHz;
Tone controls _ ce
BASE — 50 Hz, +10 dB- -1646
TREBLE 20 kHz, +10 98- dB
Subsonic titer, =. ———. MO FI. —-6 doc:
- 80 На, {в ав
PHONO MM 25 MARKO
MC 170 pV72208 TOUT Lo _
TUNER, CD, AUX, TAPE 1/DAT. o nr MAIN or REMOTE —. e. AQ180
TAPE 2/EXT 150 mV/22k0 ií_. . MAIN and REMOTE 80-160
PHONO maximum input voltage (IHF ’66, 1 kHz, RMS} EH GENERAL
MM 160 mV o
MC 2 my Power consumption 630
Power supply AC 50 Hz/60 Hz, 240V
S/N Dimensions (WxHxD) 430 х 159 х 363. гит
rated power (40) rt Da I == ETS = ; ERS FE co (18-157 TL 4-7 a
PHONO MM THB VAE SES и Wal EEE AZ |
D u ; 65 dE (IHF 66: 68 dB 25QYUV] Ee ee ee ep aa a ee
~ TUNER, CD, AUX Ez iia ALA SRN CRE BRITE ALE er. | [LT mer iE
TAPE 1/DAT, TAPE Ext a dB rss tie de crea marie ère ee res aise a Le
—26 dB power (40) — Notes: |
PHONO MM 69 dB 1. Specifications are subject to change without not.ce. Weight
MC 65 dB and dimensions are approximate,
TUNER, CD, AUX, TAPE 1/DAT 2. Total harmonic distortion is measured hy the digita!
TAPE 2/EXT 70 dB
Maintenance
To clean, use a soft dry cloth.
If the surfaces are extremely dirty, use a soft cloth, dipped into a
soap and water solution or a weak detergent solution.
Wring the cloth well before wiping the unit,
Protection Circuitry
The protection circuitry may have operated if either of the
following conditions is noticed:
«№ sound is heard when the power is switched ON.
{The current drive indicator of the safety operation indicator is
not illuminated.)
sSound stops during a performance.
The function of this circuitry is to prevent circuitry damage i, for
example, the positive and negative speaker connaction wires are
“shorted”, or if speaker systams with an impedance less than
— #0 —
spectrum analyzer (HP. 3045 system).
Wipe once again with a soft dry cloth
Never use alcohol, paint thinner, benzine, nor a chamically
treated cloth t¢ clean this unit
Such chemicals may damage the finish of your unit,
the indicated rated impedance of this unit are used.
it this occurs, follow the procedure outlined below:
1. Switch OFF the power.
2. Determine the cause of the problem and comect it.
3. Switch ON the power once again.
Note:
When the protection circuitry functions. the unit will not operate
unless the power is First switched OFF and then ON again.
Troubleshooting Guide
- Before requesting service for this unit, check this table to
determine if the problem can be solved as described below. Hf the
problem still persists after making these checks, or if there are
symptoms of malfunction not described in this table, it is
recommended that you consult the store where this unit was
purchased or your local Service Center (see list included) for
further information and assistance.
The cartridge selector is incorrectly set to the
“MM” position when a moving-coil type
cartridge is being used.
# Set the cartridge selector to the "MC" position.
The cartridge selector is incorrectly set to the
“MC” position when a moving-magnet type
cartridge is being used.
eSet the cartridge selector to the “MM” position.
The power cord plug is not completely
inserted.
o Confirm that the power cord plug is connected
completely.
Connections are incomplete or incorrect to the
speaker systems, etc.
eCheck to be sure that all connection wires are
correctly connected.
The setting of the input selectors has not been
completely or correctly made.
eCheck to be sure that the input selectors are set to
the correct position.
The speaker selectors are incorrectly set to
the “off” position.
eSetto the “on” position.
The positive (+) and negative [—) connections
of the speaker connection wires are reversed,
e Reconnect the speaker connection wires so that the
positive and negative connections are correct,
The left and right connections of the speaker
connection wires are reversed.
The teft and right connections of the
connection wires connected to other
equipment are reversed.
eCheck the speaker connection wires and connect
them correctly if necessary.
eCheck the connection wires to other equipment and
connect them correctly if necessary.
The power cord or à fluorescent light, etc., 15
eTry separating this unit from the electric appliance as
far as possible.
The connection of the ground wire is incorrect
or incomplete,
eCheck to be sure that the grounding connection is
correct.
e |f the unit is not grounded, try doing so.
The speaker connection wires are
disconnected.
eCheck and correct the connections of the speaker
connection wires.
The balance control is not set to the center
position.
e Set the mark on the balance control to the center
position.
The protection circuitry has functioned
because the positive and negative speaker
connection wires are ‘shorted” or speaker
systems with an impedance less than the
indicated rated impedance of the amplifier are
used.
A DC component is present at the input.
causing the protection circuitry to function.
» Turn off the power, and, after determining and
correcting the cause, turn on the power once again.
The compact disc direct-through switch has
not been switched “off”.
eSwitch it ‘off.
—11—
Matsushita Electric Industrial Co., Ltd.
Central P.O. Box 288, Osaka 530-91, Japan
SQX54849
Printed in Japan B0588U0

advertisement

Related manuals

advertisement