Panasonic CT34WX53 Operating Instructions
PDF
Download
Document
Advertisement
Advertisement
SAP POWER TV/VIDE O T LIG E HT M A SPEC UT DVD AUX DTV CBL RC R VC VR N A TV DB S CH CTIO VOL BBE MENU EXIT VOL CH RECALL PAGE 1 2 4 5 7 8 GUIDE 3 6 9 R-TUNE PROG 0 PIP MIN REW PLAY PIP MAX FF PAUSE STOP REC FREEZE TV/VCR PIP PIP CH VCR CH SPLIT MOVE SEARCH OPEN/CLOSE SWAP Wide Screen TV HDTV Monitor Operating Instructions Model No. CT-34WX53 For assistance, please call : 1-888-VIEW-PTV(843-9788) or send e-mail to : [email protected] or visit us at www.panasonic.com (U.S.A) For assistance, please call : 787-750-4300 or visit us at www.panasonic.com (Puerto Rico) For assistance, please call : 1-800-561-5505 or visit us at www.panasonic.ca English (Canada) TQBC0611 WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrow-head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons. The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not place liquid containers (flower vase, cups, cosmetics, etc.) above the set. (including on shelves above, etc.) WARNING: 1) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel. 2) Do not remove the grounding pin on the power plug. This apparatus is equipped with a three pin grounding-type power plug. This plug will only fit a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician. Do not defeat the purpose of the grounding plug. Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under USP4638258 and 4482866. BBE and BBE symbol are registered trademarks of BBE Sound, Inc. 2 Important Safety Instructions 1) Read these instructions. All the safety and operating instructions should be read before the appliance is operated. 2) Keep these instructions. The safety and operating instructions should be retained for future reference. 3) Heed all warnings. All warnings on the appliance and in the operating instructions should be adhered to. 4) Follow all instructions. All operating and use instructions should be followed. 5) Do not use this apparatus near water. For example, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 6) Clean only with dry cloth. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and Openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments / accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. CAUTION : This TV set is intended to be used with the following TV stand: model TY-S34WX53 for the CT-34WX53. Use with other stands may result in the TV set becoming unstable, possibly causing injury. 3 Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new color television set. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and record the model number and serial number of your set in the space provided on the back cover of these instructions. Visit our Panasonic Web Site for USA : for Puerto Rico : for Canada : www.panasonic.com www.panasonic.com www.panasonic.ca For assistance, please call : 1-888-VIEW-PTV(843-9788) or send e-mail to : [email protected] or visit us at www.panasonic.com (U.S.A) For assistance, please call : 787-750-4300 or visit us at www.panasonic.com (Puerto Rico) For assistance, please call : 1-800-561-5505 or visit us at www.panasonic.ca (Canada) Federal Communication Commission Information This equipment has been tested and found to comply with the limits for a TV Broadcast Receiver, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause or receive interference, which can be determined by turning equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the TV antenna. Increase the separation between TV and other equipment. Connect TV into separate outlet from other equipment. Consult the dealer or an experienced radio/TV technician for help. Note: This product utilizes both a Cathode Ray Tube (CRT) and other components that contain lead. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance: <http:// www.eiae.org.> FCC CAUTION: Pursuant to 47CFR, Part 15.21 of the FCC rules, any changes or modifications to this TV not expressly approved by Matsushita Electric Corporation of America could result in harmful interference and would void the user’s authority to operate this device. 4 Table of Contents Important Safety Instructions ....................................... 3 Table of Contents ........................................................... 5 Installation ...................................................................... 6 Receiver Location ......................................................... 6 Optional External Equipment ........................................ 6 AC Power Supply Cord ................................................. 6 Safety Precaution .......................................................... 6 Remote Control Battery Installation .............................. 6 Cable Connection ........................................................... 7 Connecting the Aerial cable to the RF In Terminal ........ 7 Antenna Connection ............................................. 7 Connecting Headphones / Earphones .......................... 7 Front Control Panel ....................................................... 8 Optional Equipment Connections ................................. 8 Cable Box Connection .......................................... 8 VCR Connection ................................................... 9 VCR and Cable Box Connection ......................... 10 Digital TV - Set-Top Box (DTV-STB) or DVD Connection ... 11 Amplifier Connection (TO AUDIO AMP) ................ 11 Program Out Connection (PROG OUT) .............. 12 How to connect the DIGITAL IN Terminals .................. 12 Connecting a DTV Decoder to DIGITAL IN .......... 12 Power ON / OFF ............................................................ 13 Connecting the Plug to the Wall Outlet ....................... 13 How to Turn the Power On .......................................... 13 Menu Language Selection .......................................... 13 VHF, UHF and Cable TV ............................................... 14 VHF and UHF ............................................................. 14 Cable TV ..................................................................... 15 Location of Controls .................................................... 16 Illuminated Remote Control ........................................ 16 Basic Menu Operations ............................................... 18 SET UP Operation ........................................................ 20 MENU Languages ....................................................... 20 ANTENNA Selection ................................................... 20 cc ON MUTE cc MODE (Closed Captions) ............ 20 Selecting option menus in OTHER ADJ. ..................... 21 MODE Selection ......................................................... 22 AUTO PROGRAM ....................................................... 22 MANUAL PROGRAM .................................................. 22 AUTO POWER ON ..................................................... 23 CHAN BANNER .......................................................... 23 Geomagnetic correction (Adjusting skewing of images) .... 23 IMAGE SHIFT ............................................................. 24 PICTURE Adjustment ................................................... 24 PICTURE MODE ........................................................ 24 COLOR / TINT / BRIGHTNESS / PICTURE / SHARPNESS / NORMAL ............................... 24 Selecting option menus in OTHER ADJ. ..................... 25 COLOR TEMP (Temperature) / NATURAL COLOR / VIDEO NR / 3D Y/C FILTER ............................ 25 COLOR MATRIX ......................................................... 25 VM (Velocity Modulation) ............................................ 26 FREEZE ...................................................................... 26 Audio Adjustment ........................................................ 27 Selecting STEREO/SAP/MONO ................................. 27 Selecting BASS / TREBLE / BALANCE / NORMAL .... 27 Selecting option menus in OTHER ADJ. ..................... 27 AI SOUND ................................................................... 27 BBE VIVA / BBE .......................................................... 28 SURROUND ............................................................... 28 SPEAKERS ................................................................. 28 CHANNELS Adjustment .............................................. 29 CHANNEL SCAN ........................................................ 29 FAVORITE CHANNELS Selection .............................. 29 Selecting option menus in OTHER ADJ. ..................... 30 PRESET CAPTION ..................................................... 30 MANUAL CAPTION .................................................... 31 INPUT LABEL ............................................................. 31 TIMER ............................................................................ 32 SLEEP ........................................................................ 32 TIMER1 and TIMER2 .................................................. 32 CLOCK SET ................................................................ 34 LOCK Feature ............................................................... 35 CREATE CODE FIRST ............................................... 35 CODE .......................................................................... 35 LOCK SET ...................................................................35 CHANNEL ................................................................... 36 V-CHIP SET ................................................................ 36 U.S. TV PROGRAMS .................................................. 37 U.S. MOVIES .............................................................. 38 Canadian English ........................................................ 39 Canadian French ........................................................ 40 Blocking Message ....................................................... 41 HOW LONG? .............................................................. 41 Picture in Picture Operation ........................................ 42 Split Screen ...................................................................44 ASPECT Controls ......................................................... 46 Operating peripheral equipment using the remote control ..... 47 Programming The Illuminated Remote Control Using Access Codes ........................................ 47 Programming Without A Code (When the code is not known) ......................... 48 Infrared Codes Index .................................................. 49 Mode Operational Key Chart ...................................... 52 Manual de instrucciones [Resumeu] Instalación de las pilas en el control remoto ........ 54 Conexión del cable de la antena al terminal de entrada de RF .............................................. 54 Conexión/desconexión de la alimentación ........... 55 Conexión del enchufe a un tomacorriente ................ 55 Cómo conectar la alimentación ................................. 55 Selección del idioma del menú ................................. 55 VHF, UHF y CATV ..................................................... 56 VHF y UHF ................................................................ 56 Televisión por cable .................................................. 56 Operaciones básicas con menús ........................... 57 PREPARACIÓN ......................................................... 59 Selección de MODO ................................................. 59 PROGRAMA AUTOMÁTICO..................................... 59 PROGRAMA MANUAL ............................................. 59 Ubicación de los controles ..................................... 60 Control remoto iluminado .......................................... 60 Troubleshooting Chart ................................................. 62 Cleaning ........................................................................ 62 Specifications ............................................................... 63 5 Installation Receiver Location This unit is intended to be used with an optional stand or entertainment center. Consult your dealer for available options. Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range. Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture. To ensure optimum color purity do not position magnetic equipment (motors, fans, other speakers, etc.) nearby. Optional External Equipment The Video/Audio connection between components can be made with shielded video and audio cables. For best performance, video cables should utilize 75 ohm coaxial shielded wire. Cables are available from your dealer or electronic supply store. Before you purchase any cables, be sure you know what type of output and input connectors your various components require. Also determine the length of cable you will need. AC Power Supply Cord CAUTION: To prevent electric shock, match wide blade of plug to wide slot of AC outlet and fully insert. Do not use this (polarized) plug with a receptacle or other outlet unless the blade can be fully inserted to prevent blade exposure. Safety Precaution Please take safety precautions to prevent the unit from falling over. The unit may fall over during earthquakes, or if someone stands on or shakes the TV. Fixing to a wall Use a strong rope or a chain (not included) to fasten the TV firmly to a strong support such as a wall or pillar. Remote Control Battery Installation Requires two AA batteries. 1. Turn the Transmitter face down. Remove top cover by pressing down on marking and sliding cover off in the direction indicated. 2. Install the batteries as shown in the battery compartment. (Polarity + or – must match the markings in the compartment). 3. Replace the cover and slide in reverse until the lock snaps. Two AA size Helpful Hints: For frequent remote control users, replace old batteries with alkaline batteries for longer life. Helpful Hints: Whenever you remove the batteries, you may need to reset the remote control infrared codes. We recommend that you record the code on page 49, prior to setting up the remote control. 6 Precaution on battery use Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter. Observe the following precautions: 1. Batteries should always be replaced as a pair. Always use new batteries when replacing the old set. 2. Do not combine a used battery with a new one. 3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”). 4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries. 5. Battery replacement is necessary when remote control acts sporadically or stops operating the TV set. Cable Connection Connecting the Aerial cable to the RF In Terminal Antenna Connection • For proper reception of VHF/UHF channels, an external antenna is required. For best reception, an outdoor antenna is recommended. Antenna Mode must be set to TV. • Incoming Cable from Home Antenna Connect home antenna to ANT1 connection on back of television. Select TV mode and ANT1 in the SET UP menu. ( Cable Mode is preset at the factory. Antenna users must change to TV mode and select ANT1 in the Set Up Menu.) VHF Aerial UHF Aerial DIGITAL IN COMPONENT VIDEO INPUT Mixer 1 2 Y VIDEO Incoming Cable from Home Antenna 2 3 S-VIDEO PB ANT1 75 Ohm Coaxial Cable INPUT 1 PROG OUT PR SPLIT OUT ANT2 VIDEO L L R R AUDIO TO AUDIO AMP Incoming Cable from Cable Company Note: Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A cable converter box is required for proper reception. Check with your local Cable company for its compatibility requirements. 75 Ohm VHF/UHF on back of TV Notes: (1) To obtain optimum quality picture and sound, an Aerial, the correct cable (75 Ohm coaxial) and the correct terminating plug are required. (2) If a communal Aerial system is used, you may require the correct connection cable and plug between the wall Aerial socket and your television receiver. (3) Your local Television Service Centre or Dealer may be able to assist you in obtaining the correct Aerial system for your particular area and the accessories required. (4) Any matters regarding Aerial installation, upgrading of existing systems or accessories required, and the costs incurred, are the responsibility of you, the Customer. Connecting Headphones / Earphones Connect headphones / earphones as follows. INPUT 4 ACTION TV/VIDEO VOLUME CHANNEL HPJ S-VIDEO VIDEO L-AUDIO-R (M3 plug) (Optional) You can listen to sound from the headphone Jack. 7 Cable Connection Front Control Panel Push to open the front panel of the television to use the TV without remote control or to use the Audio/Video input jacks for optional equipment. CAMCORDER TV/VIDEO Press to select VIDEO 4 input mode. INPUT 4 ACTION TV/VIDEO VOLUME CHANNEL HPJ S-VIDEO VIDEO L-AUDIO-R Note: The front control panel can be used to access menus and switch video mode when the remote control is not available. A second VCR, video disc player, video game equipment and DSS equipment can also be connected to the video inputs. See the optional equipment manual for details. Procedure 1. Connect equipment to front Audio/Video input jacks. 2. Operate optional equipment as instructed in equipment manual. Note: The S-VIDEO connection provides higher quality picture. It overrides other VIDEO connections. Use INPUT 4, AUDIO L and R with S-VIDEO connection. Optional Equipment Connections Cable Box Connection Follow this diagram when connecting your television to a cable box only. CONNECTIONS ON BACK OF TV CABLE BOX DIGITAL IN Incoming Cable COMPONENT VIDEO INPUT 1 Y VIDEO PB 2 INPUT 1 2 3 S-VIDEO ANT1 PR ANT INPUT SPLIT OUT ANT2 ANT OUTPUT CABLES NOT SUPPLIED PROG OUT VIDEO L L R R AUDIO TO AUDIO AMP Note: The remote control must be programmed with supplied codes to operate the cable box (see page 51). Viewing a premium (scrambled) cable channel Procedure 1. Select ANT2 in the SET UP menu. 2. Tune the television to Channel 3 or Channel 4. 3. Using the cable box, tune to the premium cable channel you would like to view. Note: To use special features such as Favorite Channels and Channel Captions, ANT1 must be selected in the SET UP menu (see page 20). 8 Cable Connection VCR Connection Follow this diagram when connecting your television to a VCR only. CONNECTIONS ON BACK OF TV DIGITAL IN Incoming Cable COMPONENT VIDEO INPUT 1 Y VIDEO ANT2 INPUT 1 2 3 S-VIDEO PB ANT1 PR SPLIT OUT 2 PROG OUT VIDEO L L R R AUDIO TO AUDIO AMP S-VIDEO ANT INPUT VIDEO Use either the S-Video or the Video connection. L ANT OUTPUT AUDIO R CABLES NOT SUPPLIED VCR Note: The remote control must be programmed with supplied codes to operate the VCR (see page 49, 50). Viewing a television program Procedure 1. Select ANT1 in the SET UP menu. 2. Tune the television to the television program you would like to view. Viewing a video Procedure • Option A 1. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR. 2. Begin the video. • Option B 1. Select ANT2 in the SET UP menu. 2. Tune the television to Channel 3 or 4, depending on your VCR. 3. Begin the video. Recording a television program Procedure • Option A (Recording and viewing the same program) 1. Select ANT2 in the SET UP menu. 2. Tune the television to Channel 3 or 4, depending on your VCR. 3. Using the VCR, tune to the television program you would like to record. 4. Begin recording. • Option B (Recording one program while viewing another program) 1. Select ANT1 in the SET UP menu. 2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR. 3. Using the VCR, tune to the television program you would like to record. 4. Begin recording. 5. Press the TV/VIDEO button on the remote control to switch back to TV mode. 6. Tune the television to the program you would like to view. 9 Cable Connection VCR and Cable Box Connection Follow this diagram when connecting your television to both a VCR and a cable box. VCR Use either the S-Video or the Video connection. CABLES NOT SUPPLIED CONNECTIONS ON BACK OF TV S-VIDEO VIDEO DIGITAL IN COMPONENT VIDEO INPUT L 1 AUDIO Y R ANT OUTPUT ANT INPUT Incoming Cable VIDEO PB ANT1 PR SPLIT OUT ANT2 2 INPUT 1 2 3 S-VIDEO PROG OUT VIDEO L L R R AUDIO TO AUDIO AMP CABLE BOX ANT OUTPUT ANT INPUT Note: The remote control must be programmed with supplied codes to operate the VCR and cable box (see page 49 - 51). Viewing a premium (scrambled) cable channel Procedure 1. Select ANT2 in the SET UP menu. 2. Tune the television to Channel 3 or Channel 4. 3. Using the cable box, tune to the premium cable channel you would like to view. Note: To use special features such as Favorite Channels and Channel Captions, ANT1 must be selected in the SET UP menu (see page 20). Recording a premium (scrambled) cable channel Procedure 1. Select ANT2 in the SET UP menu. 2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR. 3. Turn the VCR ON. 4. Tune the VCR to Channel 3 or 4, depending on the switch setting on the back of VCR. 5. Using your cable box, tune to the premium cable channel you would like to record. 6. Begin recording. Note: To view a different channel while recording: • Select ANT1 in the SET UP menu. • Press the TV/VIDEO button on the remote control to TV mode. • Tune the television to a program (except another premium cable channel). Notes: (1) Similar connections are available at the INPUT 1, 2, 3, 4 input terminals. Input 4 is located on the front of the unit. Select the desired VIDEO input position by pressing the TV/VIDEO button. (See page 17) (2) When connecting video cables, priority is given to the S-Video cable when the S-Video input terminal and the video input terminal are connected at the same time. 10 Cable Connection Digital TV - Set-Top Box (DTV-STB) or DVD Connection This television is capable of displaying 1080i and 480p DTV signals when connected to a DTV Tuner set-top-box (STB). In order to view DTV programming, the STB must be connected to the component video inputs (Y, PB , PR ) of the television. A DTV signal must be available in your area. Select the output of the STB to either 1080i or 480p. This television also utilizes a progressive scan doubler, which de-interlaces the NTSC signal and progressively scans the image. This allows you to sit close to the TV and not see the thin black horizontal lines (venetian blind effect) associated with interlaced TV pictures. Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) or DVD Player to the back of your TV. CABLES NOT SUPPLIED DTV INPUT TERMINALS ON BACK OF TV DIGITAL IN COMPONENT VIDEO INPUT 1 DIGITAL TV OUTPUT MAIN VIDEO PB Y Y VIDEO PR 2 INPUT 1 PB 2 3 S-VIDEO ANT1 PR SPLIT OUT AUDIO OUTPUT L ANT2 PROG OUT VIDEO L L R R AUDIO R TO AUDIO AMP Note: There are 2 sets of three video inputs, Y, PB , and PR . Separate component color inputs provide luminance and color separation. Use the L (left) and R (right) audio inputs. Amplifier Connection (TO AUDIO AMP) To listen through a separate stereo system, connect an external audio amplifier TO AUDIO AMP inputs on back of television. Note: TO AUDIO AMP terminals cannot be connected directly to external speakers. Audio Adjustments Procedure 1. Select SPEAKERS ON located in the onscreen AUDIO menu. 2. Set amplifier volume to minimum. 3. Adjust television volume to desired level. 4. Adjust amplifier volume to match the television. 5. Select SPEAKERS OFF & VARIABLE AUDIO OUT from AUDIO menu. 6. Volume,mute,bass,treble and balance are now controlled through the television. Select SPEAKERS OFF & FIXED AUDIO OUT to control audio functions through the external amplifier. CONNECTIONS ON BACK OF TV DIGITAL IN COMPONENT VIDEO INPUT 1 Y VIDEO PB ANT1 PR SPLIT OUT ANT2 2 INPUT 1 2 3 S-VIDEO External Amplifier PROG OUT VIDEO L L R R AUDIO TO AUDIO AMP CABLES NOT SUPPLIED 11 Cable Connection Program Out Connection (PROG OUT) To use the television audio and video with optional equipment, connect the PROG OUT and TO AUDIO AMP connections on the back of the television. CONNECTIONS ON BACK OF TV DIGITAL IN COMPONENT VIDEO INPUT 1 DIGITAL IN Y VIDEO PB 2 INPUT 1 2 3 S-VIDEO ANT1 PR SPLIT OUT ANT2 MONITOR PROG OUT VCR VIDEO L L R R OR TO AUDIO AMP AUDIO Procedure 1. Connect optional equipment to PROG OUT and TO AUDIO AMP terminals. 2. PROG OUT terminal display is the same as onscreen display. See optional equipment manual for further instructions for recording and monitoring. How to connect the DIGITAL IN Terminals Connecting a Digital Set -Top - Box to DIGITAL IN ( DVI Input terminal ) When connecting a Digital Set -Top - Box to DIGITAL - IN, be sure not to select “SKIP” from the INPUT LABEL menu. Failing to do so may result in a distorted display or black out (refer to page 31). DIGITAL IN terminals DIGITAL IN COMPONENT VIDEO INPUT DIGITAL IN cable (Not supplied) 1 Y VIDEO Digital Set-Top-Box PB ANT1 PR SPLIT OUT ANT2 2 INPUT 1 2 3 S-VIDEO PROG OUT VIDEO L L R R AUDIO TO AUDIO AMP Audio 2 × RCA plug By inputting a High-bandwidth Digital Content Protection (HDCP) high-definition picture source to the DIGITAL IN terminal of this television, high-definition pictures can be displayed on the screen in their digital form. (This DVI input terminal is compliant with the EIA-861 standard and is not intended for use with personal computers.) Note: The DIGITAL IN terminal can only be used with 1080i, 480p or 480i picture signals. Set the Digital Set -Top -Box DIGITAL OUT terminal Output setting to 1080i, 480p or 480i. For detailed information, refer to the Digital Set -Top -Box instruction manual. If you cannot display the picture because your Digital Set -Top -Box does not have a DIGITAL OUT terminal Output setting, use the component Video Input (or the S Video Input or Video Input). In this case the picture will be displayed as an analog signal. 12 Power ON / OFF Connecting the Plug to the Wall Outlet Note: The TV’s power cord must first be plugged into the wall outlet and then turned on at the POWER switch (standby mode). How to Turn the Power On Press the POWER switch on the TV to turn the set on. POWER-ON: Red When the set is on press the POWER switch on the TV to turn the set off. STANDBY: No light Example: The screen below is displayed for a while after the TV is turned on. (setting condition is an example.) CH 3 Remote Control Sensor JUST SAP SAP POWER VIVID TV/VIDEO LIG H T M T ASPEC E UT DVD AUX DTV CBL RC R VC VR TV DB CH CTIO Press the POWER button on the remote control to turn the TV on: Red Press the POWER button on the remote control to turn the TV off: No light (standby) N A S VOL BBE MENU POWER VOL CH RECALL Note: The TV will still consume some power as long as the power cord is still inserted into the wall outlet. Menu Language Selection In SET UP Menu, Select IDIOMA/LANGUE to change menu language to ENGLISH, ESPAÑOL (Spanish) or FRANÇAIS (French). (refer to page 20) 13 VHF, UHF and Cable TV VHF and UHF INPUT 4 ACTION TV/VIDEO VOLUME CHANNEL HPJ S-VIDEO VIDEO L-AUDIO-R INPUT 4 ACTION TV/VIDEO VOLUME CHANNEL HPJ S-VIDEO VIDEO L-AUDIO-R Operation can be done from the TV set. Channel selectors Volume adjusters Power switch • • SAP POWER LIG H E UT RC VR 1 Press TV AUX DVD R VC to operate the TV set with the remote control. CBL DTV TV T TV DB VOL BBE MENU EXIT 2 N A S CH CTIO VOL Press to turn the TV on (See page 13). POWER CH RECALL PAGE GUIDE 2 3 4 5 6 Press to select the desired channel. CH CTIO N 1 3 A M Remote control sensor TV/VIDEO T ASPEC VOL VOL CH 7 8 9 R-TUNE PROG 0 PIP MAX FF PAUSE STOP REC FREEZE TV/VCR PIP CH VCR CH 4 Select the desired volume level. A PLAY CH CTIO N PIP MIN REW VOL PIP SPLIT MOVE SEARCH OPEN/CLOSE VOL CH SWAP Notes: (1) The channel number and volume level remain the same even after the TV is turned off. (2) Power consumption and howling of sound can be reduced if the volume level is lowered. 14 VHF, UHF and Cable TV Cable TV When the antenna cable is connected to the TV antenna terminal via a cable box or VCR, set the TV channel to CH3 or CH4. This does not apply when signal is input from VIDEO INPUT. ANTENNA TERMINAL ON THE BACK OF THE TV To Antenna Input Incoming Cable from Antenna or Cable TV System. INPUT 4 ACTION TV/VIDEO VOLUME CHANNEL HPJ S-VIDEO VIDEO L-AUDIO-R OUTPUT INPUT SAP POWER T ASPEC LIG H E UT T DVD AUX DTV CBL RC R VC VR DB TV S CH CTIO VOL BBE MENU EXIT Confirming Confirm that registration with cable TV provider and connection of equipment are completed. Turn the CABLE BOX on and select the desired volume level. N A M CABLE BOX TV/VIDEO VOL CH RECALL PAGE CBL 2 POWER 2 3 4 5 6 7 8 9 PROG PIP MIN REW PLAY PIP MAX FF PAUSE STOP REC FREEZE TV/VCR PIP CH VCR CH 3 SPLIT MOVE CBL to confirm. Press while pointing the remote control towards the CABLE BOX. Note: The remote control code number is set for Panasonic products. When peripheral equipment does not operate, reset code (See page 47 - 48). 0 PIP Press GUIDE 1 R-TUNE 1 Operate the CABLE BOX and select the desired volume level. SEARCH OPEN/CLOSE SWAP 15 Location of Controls Illuminated Remote Control Power button Press to turn the TV ON or OFF (See page 13). Note: The TV’s power cord must first be plugged into the wall outlet and then turned on at the POWER switch (standby mode). ASPECT button Change of screen size (See page 46). ZOOM 4:3 FULL JUST MUTE button Press this button to mute the sound, press again to cancel the mute. Mode Selection buttons Selects the operation mode for the remote control. (See page 48) Digital Video Disk Mode Selection for Remote Control VCR Mode Selection for Remote Control Aux Mode Selection for Remote Control DVD RC VR DTV CBL Receiver/Amplifier Mode Selection for Remote Control DB Digital Broadcasting Satellite for Remote Control Cable TV Mode Selection for Remote Control TV TV Mode Selection for Remote Control AUX R VC S Digital TV Mode Selection for Remote Control R-TUNE R-TUNE button Switches to previously viewed channel or video mode. Operation of other Device PIP MIN PIP MAX Buttons REW FF Device PIP Minimize/Maximize TV VCR REW/FF VCR 16 PLAY PAUSE STOP - - - PLAY Pause STOP CABLE/DBS - - - - DVD/LD/CD Skip Search REW/FF PLAY Pause STOP RCVR Surround -/+ - - - Buttons Device REC FREEZE TV/VCR TV VCR CABLE/DBS DVD/LD/CD RCVR - PIP CH VCR CH PIP or SPLIT FREEZE PIP or SPLIT CH up/down SEARCH OPEN/CLOSE PIP Search VCR RECORD TV/VCR Switch VCR CH up/down - DBS RECORD TV/DBS Switch TV/DBS CH up/down - - - - OPEN/CLOSE - - - - Location of Controls TV/VIDEO button The input mode changes each time this button is pressed. TV VIDEO 4 DIGITAL-IN COMPONENT 2 COMPONENT 1 VIDEO 3 VIDEO 2 VIDEO 1 SAP button Selects Audio mode (See page 27). STEREO SAP TV/VIDEO LIG H E UT T DVD AUX DTV CBL RC R VR Changes to the next channel up Moves cursor upward during menu mode. DB VOL EXIT VOL VOL CH RECALL PAGE GUIDE 1 2 3 4 5 6 7 8 9 R-TUNE PROG PLAY PIP MAX FF PAUSE STOP REC FREEZE TV/VCR PIP CH VCR CH Page up/down for DBS, skip +/- for DVD & CD. SPLIT MOVE EXIT PAGE GUIDE GUIDE button for DBS. Returns to normal viewing from the MENU screen. Previous item in MENU. Direct program number selection buttons SEARCH OPEN/CLOSE PROG PIP VOL Press to display Displays menu CH time, channel, Press to access BBE RECALL MENU sleep timer and DTV, DBS or DVD other options. menus. During TV mode press to select BBE VIVA ON Changes to the next channel down Moves cursor downward during menu mode. or BBE VIVA OFF. 0 PIP MIN REW Increases volume Moves cursor to the right during menu mode. CH CTIO N BBE MENU Reduces volume Moves cursor to the left during menu mode. N A S CH CTIO A VC TV M MONO Lights the remote control buttons. The selected button blinks when lit. POWER T ASPEC SAP SWAP PROG dash button Program dash channel numbers for DTV and DBS. Swap pictures in Split Screen and Picture in Picture operation (See page 42, 45). Move PIP frame in Picture in Picture Operation (See page 43). Split Screen (see page 44) Picture in Picture Operation (see page 42) 17 Basic Menu Operations Press to display the menu screen. CH CTIO N A 1 VOL VOL Press to select desired menu icon. CH Press to enter submenu field. 2 PICTURE PIC MODE COLOR TINT BRIGHTNESS PICTURE SHARPNESS NORMAL OTHER ADJ. : EXIT VIVID NO : SUB MENU PICTURE PIC MODE VIVID COLOR TINT BRIGHTNESS PICTURE SHARPNESS NO NORMAL OTHER ADJ. PRESS ACTION FOR MAIN MENU CH CTIO Press to select or adjust. N A Press to select desired submenu feature. VOL VOL CH PICTURE PIC MODE VIVID COLOR TINT BRIGHTNESS PICTURE SHARPNESS NO NORMAL OTHER ADJ. PRESS ACTION FOR MAIN MENU COLOR 35 PRESS ACTION TO RETURN [ for OTHER ADJ.] CH CTIO Press to enter option menu field. N A Press to select OTHER ADJ. VOL VOL CH Proceed to selection and adjustment of the option menu. PICTURE PIC MODE COLOR TINT BRIGHTNESS PICTURE SHARPNESS NORMAL OTHER ADJ. PRESS TO ENTER PRESS ACTION FOR MAIN MENU PICTURE COLOR TEMP COOL ON NATURAL COLOR VIDEO NR OFF 3D Y/C FILTER ON COLOR MATRIX SD VM ON FREEZE SPLIT OTHER ADJ. PRESS ACTION FOR MAIN MENU Press to return. CH CTIO PICTURE PIC MODE VIVID COLOR TINT BRIGHTNESS PICTURE SHARPNESS NO NORMAL OTHER ADJ. PRESS ACTION FOR MAIN MENU N A To return to MAIN MENU: To return to previous screen: VOL VOL CH COLOR 35 PRESS ACTION TO RETURN Press to exit from the MENU screen. This returns the set to the normal viewing condition. CH CTIO N A To end adjustments: VOL VOL CH PICTURE PIC MODE COLOR TINT BRIGHTNESS PICTURE SHARPNESS NORMAL OTHER ADJ. : EXIT VIVID NO : SUB MENU NORMAL PICTURE 18 Basic Menu Operations PICTURE : SUB MENU STEREO SAP MONO MODE AI SOUND ON BASS BASS BBE VIVA 3D ON TREBLE TREBLE BBE ON BALANCE BALANCE SURROUND 3D NORMAL SPEAKERS ON VIVID SET SET NORMAL OTHER ADJ. PRESS ACTION FOR MAIN MENU OTHER ADJ. PRESS ACTION TO RETURN CHANNELS ALL ENTER CHANNEL 3 FAVORITE CHANNELS 2 5 8 10 18 25 : ADD : DELETE OTHER ADJ. PRESS ACTION FOR MAIN MENU CHANNELS OTHER ADJ. PRESS ACTION FOR MAIN MENU AUDIO OTHER ADJ. OTHEAJ. PRESS TO ENTER PRESS ACTION FOR MAIN MENU CHANNELS CH. SCAN FAVORITES COLOR TEMP NORMAL NATURAL COLOR ON VIDEO NR OFF 3D Y/C FILTER ON COLOR MATRIX SD VM ON FREEZE SPLIT AUDIO AUDIO MODE AUDIO PICTURE PICTURE PIC MODE COLOR TINT BRIGHTNESS PICTURE SHARPNESS NORMAL OTHER ADJ. PRESS TO ENTER PRESS ACTION FOR MAIN MENU PICTURE PIC MODE COLOR TINT BRIGHTNESS PICTURE SHARPNESS NORMAL OTHER ADJ. : EXIT CHANNELS PRESET CAPTION ABC A&E CBS AMC FOX BET NBC BRAVO PBS CNBC CNN CNN/SI ESPN COMEDY HBO COURT PRESS FOR MORE CHANNELS PRESS ACTION TO RETURN CHANNELS CH. SCAN PRESET CAPTION FAVORITES MANUAL CAPTION INPUT LABEL OTHER ADJ. PRESS TO ENTER PRESS ACTION FOR MAIN MENU CHANNELS CHANNELS INPUT LABEL COMPONENT1 COMPONENT2 DIGITAL-IN VIDEO1 VIDEO2 VIDEO3 VIDEO4 TO MOVE CURSOR TO SELECT LEBEL PRESS ACTION TO RETURN MANUAL CAPTION ENTER CHANNEL 10 ENTER CAPTION TO MOVE CURSOR TO SELECT CHANNEL PRESS ACTION TO RETURN TIMER OTHER ADJ. PRESS ACTION TO RETURN TIMER SLEEP DAY NO TIMER1 TIMER1 TIMER MON FRI ON TIME TIMER2 OFF TIME CLOCK SET ENTER CHANNEL SET TIMER PRESS ACTION FOR MAIN MENU PRESS ACTION TO RETURN LOCK CREATE CODE FIRST CLOCK SET NO PRESS ACTION TO RETURN LOCK LOCK LOCK SET V - CHIP SET ENTER CODE HOW LONG? LOCK CODE PRESS ACTION FOR MAIN MENU SET UP IDIOMA/ LANGUE ANTENNA ON MUTE MODE OTHER ADJ. PRESS ENGLISH ANT1 NO OFF TO ENTER SET UP PRESS ACTION FOR MAIN MENU PRESS ACTION FOR MAIN MENU 12HOURS CHANG CODE PRESS ACTION FOR MAIN MANU SET UP MODE CABLE AUTO PROGRAMA MANUAL PROGRAMA AUTO POWER ON OFF CHAN BANNER ON OTHER ADJ. GEOMAGNETIC CORR PRESS FOR MORE PRESS ACTION TO RETURN OFF BLOCK PROGRAMS : U.S. MOVIES SESTTING: SET UP PRESS FOR MORE IMAGE SHIFT OFF ON IS RECOMMENDED OTHER ADJ. PRESS ACTION TO RETURN 19 SET UP Operation MENU Languages In SET UP Menu, select IDIOMA / LANGUE to change menu language to ENGLISH, ESPAÑOL (Spanish) or FRANÇAIS (French). CH CTIO N A Press to select IDIOMA / LANGUE. VOL VOL SET UP IDIOMA/ LANGUE ANTENNA ON MUTE MODE OTHER ADJ. ENGLISH ANT1 NO OFF Press to select ENGLISH, SPANISH or FRENCH. CH PRESS ACTION FOR MAIN MENU ENGLISH ANTENNA Selection To select either ANT1 or ANT2. SET UP IDIOMA/ LANGUE ANTENNA ON MUTE MODE OTHER ADJ. CH CTIO Press to select ANT1 or ANT2. N A Press to select ANTENNA. VOL VOL ANT1 ENGLISH ANT1 NO OFF ANT2 PRESS ACTION FOR MAIN MENU CH cc ON MUTE cc MODE (Closed Captions) This receiver has a built in decoder that provides a visual depiction of the audio portion of a television program in the form of written words across the screen (white or colored letters on a black background). It allows the viewer to read the dialogue of a television program or other information. cc ON MUTE Activates the On-Screen Closed Caption feature, when the MUTE button on the Remote Control is pressed. To deactivate, press the MUTE button again. Note: This feature functions when the Closed Caption Mode is in the “OFF” position. The program being viewed must be broadcast with Closed Caption. CH CTIO SET UP Press to select from the following: N A Press to select cc ON MUTE. VOL VOL NO (OFF) C1 C2 C3 C4 IDIOMA/ LANGUE ANTENNA ON MUTE MODE OTHER ADJ. ENGLISH ANT1 NO OFF CH PRESS ACTION FOR MAIN MENU 20 SET UP Operation cc MODE Activates the On-Screen Closed Caption feature. When activated this feature will remain on until OFF is selected in this menu. SET UP CH CTIO Press to select from the following: N A Press to select cc MODE. VOL VOL OFF C1 C2 T1 T2 IDIOMA/ LANGUE ANTENNA ON MUTE MODE OTHER ADJ. ENGLISH ANT1 NO OFF CH T4 T3 C4 C3 PRESS ACTION FOR MAIN MENU • CAPTION OFF - Recommended mode when Closed Caption is not being used. • CAPTION C1 For video related information that can be displayed (up to 4 lines of script strategically placed on the television screen so that it does not obstruct relevant parts of the picture). • CAPTION C2 Another mode used for video related information. • TEXT T1 Blanks out a large portion of the picture on the television screen, and displays program guide or any other information currently being transmitted. • TEXT T2 Another mode which displays information and blanks out a large portion of the picture on the television screen. • CAPTION C3 Another mode used for video related information. • CAPTION C4 Another mode used for video related information. • TEXT T3 Another mode which displays information and blanks out a large portion of the picture on the television screen. Another mode which displays information and blanks out a large portion of the picture on the • TEXT T4 television screen. Notes: (1) Recommended menu Set Up for Closed Caption when using Mute Button. cc ON MUTE: C1 cc MODE: OFF (2) The setting for CC ON MUTE is valid only when the CC MODE is OFF. CC MODE set to ON will override CC ON MUTE. This menu cannot be selected when the MAIN picture is displaying a COMPONENT VIDEO INPUT of 480i or more. (3) When aspect is ZOOM, Closed Caption cannot be used. Selecting option menus in OTHER ADJ. To select option menus in OTHER ADJ. SET UP Press to select OTHER ADJ. CH CTIO Press to enter option menu field. N A 1 VOL VOL IDIOMA/ LANGUE ANTENNA ON MUTE MODE OTHER ADJ. PRESS TO ENTER CH PRESS ACTION FOR MAIN MENU Press to select desired option menu. CH CTIO N A 2 VOL VOL CH Proceed to adjustments. SET UP MODE CABLE AUTO PROGRAMA MANUAL PROGRAMA AUTO POWER ON OFF CHAN BANNER ON OTHER ADJ. GEOMAGNETIC CORR PRESS FOR MORE PRESS ACTION TO RETURN 21 SET UP Operation MODE Selection To select either CABLE or TV. Press to select MODE. CH CTIO Press to select CABLE or TV. A N VOL VOL CABLE TV CH SET UP MODE CABLE AUTO PROGRAMA MANUAL PROGRAMA AUTO POWER ON OFF CHAN BANNER ON OTHER ADJ. GEOMAGNETIC CORR PRESS FOR MORE PRESS ACTION TO RETURN AUTO PROGRAM To automatically program all channels with signal. CH CTIO Press to start AUTO PROGRAM. N A Press to select AUTO PROGRAM. VOL VOL CH SET UP MODE CABLE AUTO PROGRAMA MANUAL PROGRAMA AUTO POWER ON OFF CHAN BANNER ON OTHER ADJ. GEOMAGNETIC CORR PRESS FOR MORE PRESS ACTION TO RETURN MANUAL PROGRAM To manually add or delete channels. Press to select MANUAL PROGRAM. CH CTIO N A 1 VOL VOL Press to display next menu. CH 2 1 2 3 4 5 6 7 8 9 Use remote numeric keypad to select desired channel. SET UP MODE CABLE AUTO PROGRAMA MANUAL PROGRAMA AUTO POWER ON OFF CHAN BANNER ON OTHER ADJ. GEOMAGNETIC CORR PRESS FOR MORE PRESS ACTION TO RETURN MANUAL PROGRAM ENTER CHANNEL 0 TO ADD TO DELETE Press to ADD or DELETE the channel. CH CTIO N A 3 VOL VOL CH 22 3 SET UP Operation AUTO POWER ON Select SET to power up the TV at the same time as the cable box or other components or select OFF. CH CTIO SET UP MODE CABLE AUTO PROGRAM MANUAL PROGRAM AUTO POWER ON SET CHAN BANNER ON OTHER ADJ. GEOMAGNETIC CORR PRESS FOR MORE PRESS ACTION TO RETURN Press to select SET or OFF. N A Press to select AUTO POWER ON. VOL VOL SET OFF CH CHAN BANNER Select ON to display the CHANNEL BANNER on the screen or select OFF. SET UP CH CTIO MODE CABLE AUTO PROGRAM MANUAL PROGRAM AUTO POWER ON SET CHAN BANNER ON OTHER ADJ. GEOMAGNETIC CORR PRESS FOR MORE PRESS ACTION TO RETURN Press to select ON or OFF. N A Press to select CHAN BANNER. VOL VOL ON CH OFF Geomagnetic correction (Adjusting skewing of images) GEOMAGNETIC CORR (CORRECTION) adjusts to erase the discoloration of the picture due to earth’s magnetic field in the area. This correction is made when moving the TV set or when image is slightly skewed. SET UP Press to select GEOMAGNETIC CORR. MODE CABLE AUTO PROGRAM MANUAL PROGRAM AUTO POWER ON SET CHAN BANNER ON OTHER ADJ. GEOMAGNETIC CORR PRESS FOR MORE PRESS ACTION TO RETURN CH CTIO N A 1 VOL VOL CH GEOMAGNETIC CORRECTION Adjust the vertical bar left or right until the discoloration disappears. CH CTIO 0 TO ADJUST PRESS ACTION TO EXIT N A 2 VOL VOL CH Press to exit GEOMAGNETIC CORRECTION. “DEGAUSSING” will be displayed for three seconds. DEGAUSSING 23 SET UP Operation IMAGE SHIFT For use as a screen saver, this function changes the entire image position (shift). SET UP PRESS FOR MORE IMAGE SHIFT ON ON IS RECOMMENDED CH CTIO Press to select ON or OFF. N A Press to select IMAGE SHIFT. VOL OTHER ADJ. VOL ON OFF CH PRESS ACTION TO RETURN PICTURE Adjustment PICTURE MODE CH CTIO Press to select your desired PICTURE MODE. N A Press to select PIC MODE. VOL VOL VIVID CH STANDARD CINEMA PICTURE PIC MODE COLOR TINT BRIGHTNESS PICTURE SHARPNESS NORMAL OTHER ADJ. : EXIT VIVID SET : SUB MENU Press to select each submenu (COLOR / TINT / BRIGHTNESS / PICTURE / SHARPNESS / NORMAL). CH CTIO N A COLOR / TINT / BRIGHTNESS / PICTURE / SHARPNESS / NORMAL VOL VOL Press to adjust the desired level by looking at the picture behind the menu. CH Item 24 PICTURE PIC MODE COLOR TINT BRIGHTNESS PICTURE SHARPNESS NORMAL OTHER ADJ. : EXIT Function COLOR Adjusts desired color intensity. TINT Adjusts natural flesh tones. BRIGHTNESS Adjusts dark areas of picture. PICTURE Adjusts white areas of picture. SHARPNESS Adjusts clarity of outline detail. NORMAL Resets all picture adjustments to factory default settings. VIVID SET : SUB MENU PICTURE Adjustment Selecting option menus in OTHER ADJ. To select option menus in OTHER ADJ. PICTURE PIC MODE COLOR TINT BRIGHTNESS PICTURE SHARPNESS NORMAL OTHER ADJ. PRESS TO ENTER PRESS ACTION FOR MAIN MENU Press to select OTHER ADJ. CH CTIO Press to enter option menu field. N A 1 VOL VOL CH PICTURE Press to select desired option menu. COLOR TEMP NORMAL NATURAL COLOR ON VIDEO NR OFF 3D Y/C FILTER ON COLOR MATRIX SD VM ON FREEZE SPLIT CH CTIO N A 2 VOL VOL Proceed to adjustments. CH OTHER ADJ. PRESS ACTION FOR MAIN MENU COLOR TEMP (Temperature) / NATURAL COLOR / VIDEO NR / 3D Y/C FILTER PICTURE COLOR TEMP NORMAL NATURAL COLOR ON VIDEO NR OFF 3D Y/C FILTER ON COLOR MATRIX SD VM ON FREEZE SPLIT CH CTIO N A Press to select each option menu (COLOR TEMP / NATURAL COLOR / VIDEO NR / 3D Y/C FILTER). VOL VOL Press to adjust the desired level by looking at the picture behind the menu. CH Item Mode OTHER ADJ. PRESS ACTION FOR MAIN MENU NATURAL COLOR ON OFF VIDEO NR ON OFF Explanations To increase or decrease WARM (red) and COOL (blue) colors to suit personal preferences. To increase the color reproduction range with natural color gradation and highly delicate hues. Reduces noise in the channel,commonly called snow. Remains off when receiving a strong signal. 3D Y/C FILTER ON OFF Minimizes noise and cross color in the picture. COLOR TEMP (temperature) NORMAL WARM COOL COLOR MATRIX Displays input signals (480p signals) in a natural color from digital equipment adaptors connected to COMPONENT VIDEO INPUT (Y, Pb/Cb ,Pr/Cr input terminals). Select HD or SD to automatically adjust color parameters for HD (high definition) and SD (standard definition). CH CTIO Press to select SD or HD. N A Press to select COLOR MATRIX. VOL VOL CH SD : When the input signal is a normal TV system (NTSC). HD : When the input signal is a High-Definition system (ATSC). PICTURE COLOR TEMP NORMAL NATURAL COLOR ON VIDEO NR OFF 3D Y/C FILTER ON COLOR MATRIX SD VM ON FREEZE SPLIT OTHER ADJ. PRESS ACTION FOR MAIN MENU Note: (1) When viewing a non-standard DTV signal format, you can change color parameters manually for the best picture quality. (2) COLOR MATRIX does not need to be set when using High-Definition equipment or 480i output equipment. Use only for 480p signal source. 25 PICTURE Adjustment VM (Velocity Modulation) Select ON to emphasize the edge of an image, or select OFF. PICTURE COLOR TEMP NORMAL NATURAL COLOR ON VIDEO NR OFF 3D Y/C FILTER ON SD COLOR MATRIX VM ON FREEZE SPLIT CH CTIO Press to select ON or OFF. N A Press to select VM. VOL VOL ON OFF OTHER ADJ. PRESS ACTION FOR MAIN MENU CH FREEZE Select SPLIT or PIP to determine the frozen picture frame during single screen. PICTURE COLOR TEMP NORMAL NATURAL COLOR ON VIDEO NR OFF 3D Y/C FILTER ON COLOR MATRIX SD VM ON SPLIT FREEZE Press to select FREEZE. CH CTIO Press to select SPLIT or PIP. N A 1 VOL VOL SPLIT PIP OTHER ADJ. PRESS ACTION FOR MAIN MENU CH 2 FREEZE TV/VCR FREEZE When the screen is single press TV/VCR to freeze the screen. FREEZE When FREEZE SPLIT is selected. 3 FREEZE TV/VCR FREEZE When FREEZE PIP is selected. FREEZE Press TV/VCR again to recover. Notes: FREEZE (1) When TV/VCR is pressed during Split Screen, the Split Screen will be frozen and the main picture continues action (see page 47). Main Picture Split Screen (FREEZE) FREEZE (2) When TV/VCR is pressed during PIP Operation, the PIP frame will be frozen and the main picture continues action (see page 46). Main Picture 26 PIP frame (FREEZE) Audio Adjustment Selecting STEREO/SAP/MONO CH CTIO N A Press to select MODE. VOL VOL CH Press to select STEREO / SAP / MONO. Red display - Signal available White display - Signal not available Note: AUDIO MODE selection is also possible by pressing the button on the remote control (see page 17). AUDIO MODE STEREO SAP MONO BASS TREBLE BALANCE SET NORMAL SAP OTHER ADJ. PRESS ACTION FOR MAIN MENU Helpful Hints: STEREO - Two channel Audio reception. • SAP - Second Audio Programming (typically used for bilingual audio). • MONO - Use when stereo signal is weak. • Selecting BASS / TREBLE / BALANCE / NORMAL CH CTIO Press to adjust the desired level by listening to the sound. N A Press to select BASS / TREBLE / BALANCE / NORMAL. VOL AUDIO MODE STEREO SAP MONO BASS TREBLE VOL BALANCE SET NORMAL CH OTHER ADJ. PRESS ACTION FOR MAIN MENU Item Effect BASS Less More Function Increase or decrease the bass response. TREBLE Less More Increase or decrease the treble response. BALANCE Left SP. Right SP. Emphasize the left / right speaker volume. NORMAL NO Reset BASS, TREBLE and BALANCE adjustments to factory default settings. Selecting option menus in OTHER ADJ. To select option menus in OTHER ADJ. Press to select OTHER ADJ. 1 AUDIO MODE Press to enter option menu field. N A BASS CH CTIO VOL OTHER ADJ. OTHEAJ. PRESS TO ENTER PRESS ACTION FOR MAIN MENU Press to select desired option menu. CH CTIO AUDIO AI SOUND ON BBE VIVA 3D OFF BBE OFF SURROUND OFF N A BALANCE NORMAL VOL CH 2 TREBLE VOL VOL Proceed to adjustments. SPEAKERS ON OTHER ADJ. PRESS ACTION TO RETURN CH AI SOUND AI SOUND Equalize overall volume levels across all channels.(AI sound is not available in VIDEO mode). Press to select AI SOUND. AUDIO N A AI SOUND CH CTIO VOL VOL CH Press to select ON or OFF. ON OFF ON BBE VIVA 3D OFF BBE OFF SURROUND OFF SPEAKERS ON Note: Al SOUND is not available in VIDEO mode. OTHER ADJ. PRESS ACTION TO RETURN 27 Audio Adjustment BBE VIVA / BBE The distinguishing feature of BBE VIVA is its maintenance of accurate audio imagery. Ordinary 3D surround systems force the sound out to the left and right, affecting the center channel. As a result it may become hard to hear people's voices, or the center audio may completely disappear. BBE VIVA reproduces vocals in music and voices in movies accurately and distinctly. BBE VIVA This maintains a constant level of sound that is faithful to the original, producing Hi-Fi 3D sound that cannot be obtained with other types of 3D Surround. Use special signal processing to accurately reproduce the "attack" of each sound, in order to make it immediate and superbly faithful to the original, while retaining its natural feel. ON BBE VIVA 3D ON BBE ON SURROUND 3D SPEAKERS ON OTHER ADJ. PRESS ACTION TO RETURN Press to select BBE VIVA [ With BBE VIVA Version] or BBE [ No BBE VIVA Version]. CH CTIO AI SOUND [ With BBE VIVA Version] N A BBE AUDIO VOL VOL AUDIO Press to select ON or OFF. CH ON AI SOUND OFF Notes: • When “BBE VIVA” is set to ON, “BBE” and “SURROUND” setting are fixed to ON. • When “BBE VIVA” is set to OFF, “BBE” and “SURROUND” can be set individually. ON BBE VIVA 3D OFF BBE OFF SURROUND OFF SPEAKERS ON OTHER ADJ. PRESS ACTION TO RETURN [ No BBE VIVA Version] SURROUND CH CTIO N A To enjoy a concert hall effect, turn the SURROUND to ON. SURROUND function is effective when BBE VIVA is set to OFF. Press to select SURROUND. VOL VOL AI SOUND Press to select ON or OFF. ON OFF Notes: During stereo sound or soft playing : SURROUND During monoural sound : SURROUND CH AUDIO ON BBE VIVA 3D OFF BBE OFF SURROUND OFF SPEAKERS ON OTHER ADJ. PRESS ACTION TO RETURN set to ON. set to OFF. SPEAKERS Select the desired SPEAKER mode. AUDIO AI SOUND CH CTIO Press to select your desired mode. N A Press to select SPEAKERS. VOL VOL ON OFF BBE OFF SURROUND OFF SPEAKERS ON OFF & VARIABLE AUDIO OUT OTHER ADJ. PRESS ACTION TO RETURN CH OFF & FIXED AUDIO OUT Mode 28 ON BBE VIVA 3D Function ON TV speakers operate normally. OFF & Variable Audio Out TV speakers off -audio adjustable by television. OFF & Fixed Audio Out TV speakers off -audio adjustable by the external amplifier only. CHANNELS Adjustment CHANNEL SCAN Let you select the channel scanning mode either FAV or ALL. CHANNEL SCAN FAV CHANNEL SCAN ALL To enter up to 16 favorite channels. To scan all channels when using the CH up/down buttons. CHANNELS Press to select CH. SCAN. CH CTIO CH. SCAN FAVORITES Press to select FAV or ALL. A N VOL VOL FAV ALL ALL ENTER CHANNEL 3 FAVORITE CHANNELS 2 5 8 10 18 25 : ADD : DELETE OTHER ADJ. PRESS ACTION FOR MAIN MENU CH FAVORITE CHANNELS Selection 1 CHANNELS CH. SCAN CH CTIO FAVORITES N A Press to select FAVORITES. VOL VOL CH ALL ENTER CHANNEL 3 FAVORITE CHANNELS 2 5 8 10 18 25 : ADD : DELETE OTHER ADJ. PRESS ACTION FOR MAIN MENU 2 1 2 CHANNELS 3 4 5 6 7 8 9 Use remote numeric keypad to select desired channel. CH. SCAN FAVORITES 0 ALL ENTER CHANNEL 15 FAVORITE CHANNELS 2 5 8 10 18 25 : ADD : DELETE OTHER ADJ. PRESS ACTION FOR MAIN MENU (Example: Channel 15 is selected) Press channel. CH CTIO to add or to delete the selected VOL CHANNELS CH. SCAN FAVORITES N A 3 VOL CH ALL ENTER CHANNEL 15 FAVORITE CHANNELS 2 5 8 10 15 18 25 : ADD : DELETE OTHER ADJ. PRESS ACTION FOR MAIN MENU (Example: Channel 15 is added) 4 2 3 Repeat step 2 to 3 up to 16 favorite channels. 29 CHANNELS Adjustment Selecting option menus in OTHER ADJ. To select option menus in OTHER ADJ. Press to select OTHER ADJ. 1 CHANNELS CH. SCAN CH CTIO Press to enter option menu field. FAVORITES A N VOL VOL CH OTHER ADJ. PRESS TO ENTER PRESS ACTION FOR MAIN MENU Press to select desired option menu. VOL CHANNELS PRESET CAPTION CH CTIO MANUAL CAPTION N A 2 INPUT LABEL VOL Proceed to adjustments. CH OTHER ADJ. PRESS ACTION TO RETURN PRESET CAPTION Assign channel numbers to pre-set popular TV stations. CHANNELS Press to select PRESET CAPTION. VOL INPUT LABEL VOL Press to display next menu. CH OTHER ADJ. PRESS ACTION TO RETURN Press to select desired PRESET CAPTION. CH CTIO N A 2 VOL VOL CH 3 1 2 3 4 5 6 7 8 9 0 30 PRESET CAPTION MANUAL CAPTION CH CTIO N A 1 Use remote numeric keypad to select desired channel (refer to your local TV guide). Note: To delete a channel, press highlighted. VOL while channels CHANNELS PRESET CAPTION ABC A&E CBS AMC FOX BET NBC BRAVO PBS CNBC CNN CNN/SI ESPN COMEDY HBO COURT PRESS FOR MORE CHANNELS PRESS ACTION TO RETURN CHANNELS Adjustment MANUAL CAPTION Enter channel numbers and captions manually. Press to select MANUAL CAPTION. 1 PRESET CAPTION CH CTIO Press to display next menu. N A CHANNELS VOL MANUSL CAPTION INPUT LABEL VOL CH Press to enter desired channel. CH CTIO N A 2 OTHER ADJ. PRESS ACTION TO RETURN VOL CHANNELS VOL OR CH MANUAL CAPTION ENTER CHANNEL 10 ENTER CAPTION 1 2 3 4 5 6 7 8 9 Use remote numeric keypad to select desired channel (refer to your local TV guide). TO MOVE CURSOR TO SELECT CHANNEL PRESS ACTION TO RETURN 0 Press to select ENTER CAPTION. 3 CHANNELS CH CTIO ENTER CHANNEL N A MANUAL CAPTION VOL VOL TO MOVE CURSOR TO SELECT CHARACTER CH Press to select characters. 4 VOL PRESS ACTION TO RETURN CHANNELS CH CTIO MANUAL CAPTION N A 10 ENTER CAPTION VOL ENTER CHANNEL ENTER CAPTION CH Press to move cursor. Repeat Step 4 up to 4 characters. Note: In MANUAL CAPTION up to 4 characters can be selected as a CAPTION. 10 : / 5A TO MOVE CURSOR TO SELECT CHARACTER PRESS ACTION TO RETURN INPUT LABEL Label video input connections to display optional equipment. CHANNELS PRESET CAPTION Press to select INPUT LABEL. INPUT LABEL CH CTIO VOL VOL Press to display next menu. OTHER ADJ. PRESS ACTION TO RETURN CH Press to move cursor. 2 CH CTIO N A MANUSL CAPTION N A 1 VOL VOL CH Press to select desired LABEL. Note: To skip, select LABEL, then press VOL or VOL to select ‘‘SKIP’’. The selected INPUT mode will be skipped when TV/VIDEO button is pressed. CHANNELS INPUT LABEL COMPONENT1 VCR COMPONENT2 DIGITAL-IN VIDEO1 VIDEO2 VIDEO3 VIDEO4 TO MOVE CURSOR TO SELECT LEBEL PRESS ACTION TO RETURN 31 TIMER The TIMER can switch the TV ON or OFF. Before attempting TIMER1 and TIMER2 confirm the CLOCK SET and adjust if necessary. Then set TIMER1 and TIMER2. SLEEP SLEEP sets the sleep time. Press to select SLEEP. TIMER SLEEP CH CTIO A N VOL NO TIMER1 VOL Press to select the desired sleep time. To turn off the timer select NO. TIMER2 CLOCK SET CH NO 30 60 90 PRESS ACTION FOR MAIN MENU TIMER1 and TIMER2 In TIMER menu, select one or both timers to turn the television on and off at selected times, on selected channels, and on selected days.TIME must be entered in CLOCK SET to operate the TIMER features. Press to select TIMER1 or TIMER2. TIMER CH CTIO TIMER1 PRESS TO ENTER TIMER2 PRESS TO ENTER N A SLEEP VOL VOL Press to enter. CLOCK SET CH PRESS ACTION FOR MAIN MENU DAY VOL TIMER DAY TIMER1 CH CTIO N A Set the day of the week. Press to select DAY. VOL Press to set the day of the week. (select day or days) MON FRI ON TIME OFF TIME ENTER CHANNEL SET NO CH PRESS ACTION TO RETURN ON TIME Set the time of day. Press to select ON TIME. VOL Press to set hours AM or PM. SET Press to move to minutes position. 2 A TIMER1 CH CTIO Press to set minutes. N 32 FRI NO PRESS ACTION TO RETURN CH TIMER DAY MON ON TIME 1 2 : 0 0 PM FRI OFF TIME ENTER CHANNEL VOL CH 1 2 : 0 0 PM ENTER CHANNEL VOL VOL MON ON TIME OFF TIME CH CTIO N A 1 TIMER1 TIMER DAY SET PRESS ACTION TO RETURN NO TIMER OFF TIME Set the time of day. Press to select OFF TIME. CH CTIO Press to set hours AM or PM. N A 1 VOL TIMER1 VOL TIMER DAY MON ON TIME 1 2 : 0 0 PM OFF TIME 1 3 : 0 0 PM FRI ENTER CHANNEL CH SET NO PRESS ACTION TO RETURN Press to move to minutes position. CH CTIO Press to set minutes. N A 2 VOL TIMER1 VOL TIMER DAY MON ON TIME 1 2 : 0 0 PM OFF TIME 1 3 : 0 0 PM FRI ENTER CHANNEL CH SET NO PRESS ACTION TO RETURN ENTER CHANNEL Press to select ENTER CHANNEL. CH CTIO Press to select channel. N A 1 VOL TIMER1 VOL TIMER DAY MON ON TIME 1 2 : 0 0 PM OFF TIME 1 3 : 0 0 PM ENTER CHANNEL CH SET FRI 5 NO PRESS ACTION TO RETURN Press to select SET. CH CTIO Press to select YES. N A 2 VOL VOL YES NO CH TIMER1 TIMER DAY MON ON TIME 1 2 : 0 0 PM OFF TIME 1 3 : 0 0 PM ENTER CHANNEL SET FRI 5 NO PRESS ACTION TO RETURN TIMER Activation The TIMER is active when the television is OFF or ON. The television will switch to the selected channel at the selected time set in the TIMER. Turn Off After 90 Minutes The television automatically turns OFF after 90 minutes when turned ON by the TIMER. If the OFF time is selected or if a key is pressed, the automatic OFF after 90 minutes will be cancelled. Notes: (1) When the power to the TV set is disrupted due to a power outage or similar problem, after power is restored, the offtimer will be deactivated and the TV will be in standby mode. (2) To see the remaining sleep time, press the RECALL button. 33 TIMER CLOCK SET CLOCK SET sets the present time. This is necessary to operate the TIMER features. 1 Press to select CLOCK SET. TIMER CH CTIO TIMER1 N A SLEEP VOL VOL Press to enter. TIMER2 CLOCK SET PRESS TO ENTER CH PRESS ACTION FOR MAIN MENU 2 TIME Set the time of day. TIMER CH CTIO N A Press to set hours AM or PM. VOL VOL CLOCK SET 1 2 : 0 0 AM SUN CH PRESS ACTION TO RETURN 3 CH CTIO VOL TIMER Press to set minutes. N A Press to move to minutes position. VOL CLOCK SET 1 2 : 3 0 PM SUN CH PRESS ACTION TO RETURN 4 DAY Set the day of the week. TIMER CH CTIO VOL CLOCK SET 1 2 : 3 0 PM VOL CH 34 Press to select the day of the week. N A Press to move to DAY position. PRESS ACTION TO RETURN SUN LOCK Feature CREATE CODE FIRST To use LOCK options CREATE CODE FIRST. 1 2 3 4 5 6 7 8 9 LOCK Use the remote numeric keypad to enter a four-digit secret code. While entering a code, by pressing the up button you can input a new code again. or down After entering your secret code for the first time, the onscreen display will change to ENTER CODE. 0 CREATE CODE FIRST PRESS ACTION FOR MAIN MENU LOCK ENTER CODE Notes: PRESS ACTION FOR MAIN MENU (1) Use a code that is easy to remember and record it in a safe place. (2) If you do not remember your code, LOCK will unlock in 12, 24, or 48 hours, depending on the current setup. Be cautious when selecting ALWAYS. If ALWAYS is selected, and you forget your secret code, the TV must be serviced by a qualified technician to clear the LOCK setup. CODE If you select CODE, and you change your code from the one used in the CREATE CODE FIRST or ENTER CODE, your new code becomes the controlling code. CH CTIO LOCK 1 2 3 4 5 6 7 8 9 Use the remote numeric keypad to enter a fourdigit secret code. N A Press to select CODE. VOL VOL CH LOCK SET V-CHIP SET HOW LONG? CODE 0 OFF BLOCK PROGRAMS : U.S. MOVIES SESTTING: 12HOURS CHANGE CODE PRESS ACTION FOR MAIN MENU LOCK SET Select LOCK SET to prevent video games and VCR tapes from being viewed. CH CTIO LOCK LOCK SET V-CHIP SET Press to select from the following. N A Press to select LOCK SET. VOL VOL OFF GAME CHANNEL ALL HOW LONG? OFF BLOCK PROGRAMS : U.S. MOVIES SESTTING: 12HOURS CH CODE MODE Function OFF Turns Lock function off. GAME Lock CH 3, 4 and Video inputs. CHANNEL Lock up to four channels. ALL Locks all channels and video inputs. CHANGE CODE PRESS ACTION FOR MAIN MENU 35 LOCK Feature CHANNEL Press to select CHANNEL. 1 LOCK CHANNEL CH CTIO LOCK THESE CHANNELS N A LOCK MODE VOL 1 VOL 124 TO MOVE CURSOR TO SELECT CHANNEL CH PRESS ACTION TO RETURN Press to select channel position. CH CTIO VOL VOL Press to select channels. (Or use remote numeric keypad to select channels.) CH 1 2 3 4 5 6 7 8 9 0 3 LOCK CHANNEL LOCK MODE N A 2 LOCK THESE CHANNELS 1 124 TO MOVE CURSOR TO SELECT CHANNEL PRESS ACTION TO RETURN Repeat step 2 for up to four channels. V-CHIP SET In the United States and Canada, the V-CHIP consists of two rating systems, which are MPAA (MOTION PICTURE) and TV PARENTAL GUIDELINES. Its function is to block programs by following the rating data in the XDS data packets sent from broadcasting stations. The user can select which rating programs should be blocked by using the LOCK MENU options. 1 CH CTIO Press to select from the following. LOCK LOCK SET V-CHIP SET N A Press to select V-CHIP SET. VOL VOL HOW LONG? CH CODE U.S. MOVIES CANADIAN FRENCH 2 U.S. TV PROGRAMS CANADIAN ENGLISH A Press to enter SETTING. LOCK LOCK SET V-CHIP SET N VOL VOL HOW LONG? CH 12HOURS CHANGE CODE PRESS ACTION FOR MAIN MENU Press to select SETTING. CH CTIO OFF BLOCK PROGRAMS : U.S. MOVIES SESTTING: CODE OFF BLOCK PROGRAMS : U.S. MOVIES SESTTING: 12HOURS CHANGE CODE PRESS ACTION FOR MAIN MENU 36 LOCK Feature U.S. TV PROGRAMS This TV model features the “V-Chip technology” which allows you to use U.S. TV PROGRAMS Guide ratings to block various types of TV programs. PIP will also be blocked automatically. U.S. TV PROGRAMS RATING CHART Press to select U.S. TV PROGRAMS. CH CTIO Press to select U.S. TV PROGRAMS ON or OFF. N A 1 VOL VOL ON OFF LOCK ON U. S TV PROGRAMS YES VIEW NR PROGRAMS? BASIC SETTING: TY-Y TY-Y7 FV TY-G TY-PG V S L D TY-1 4 V S L D TY-MA V S L D PRESS ACTION TO RETURN CH Press to select VIEW NR PROGRAMS?. CH CTIO Press to select VIEW NR PROGRAMS? YES or NO. N A 2 VOL VOL YES NO YES: NR programs will be received. NO: NR programs will be blocked. CH Press to select SETTING. CH CTIO N A 3 VOL VOL CH Press to select BASIC or DETAILED. BASIC: Allows you to select only general ratings such as TV-Y, TV-PG, etc. DETAILED: Allows you to select both general ratings and content such as V, L, etc. Note: See Customer Caution. Press to move between different ratings. CH CTIO N A 4 VOL VOL CH Press to select ratings you would like to block (RED) and unblock (GREEN). Perform Step 4 for each rating. Note: See the U.S. TV PROGRAMS RATINGS CHART. LOCK ON U. S TV PROGRAMS YES VIEW NR PROGRAMS? BASIC SETTING: TY-Y TY-Y7 FV TY-G TY-PG V S L D TY-1 4 V S L D TY-MA V S L D PRESS ACTION TO RETURN LOCK ON U. S TV PROGRAMS YES VIEW NR PROGRAMS? BASIC SETTING: TY-Y TY-Y7 FV TY-G TY-PG V S L D TY-1 4 V S L D TY-MA V S L D PRESS ACTION TO RETURN LOCK ON U. S TV PROGRAMS YES VIEW NR PROGRAMS? BASIC SETTING: TY-Y TY-Y7 FV TY-G TY-PG V S L D TY-1 4 V S L D TY-MA V S L D PRESS ACTION TO RETURN U.S. TV PROGRAMS RATINGS CHART NR TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA FV V S L D Not Rated. SEE CUSTOMER CAUTION on the next page. All children. The themes and elements in this program are specifically designed for a very young audience, including children from ages 2-6. Directed to older children. Themes and elements in this program may include mild physical or comedic violence, or may frighten children under the age of 7. General audience. It contains little or no violence, no strong language, and little or no sexua dialogue or situations. Parental guidance suggested. The program may contain infrequent coarse language, limited violence, some suggestive sexual dialogue and situations. Parents strongly cautioned. This program may contain sophisticated themes, sexual content, strong language and more intense violence. Mature audiences only. This program may contain mature themes, profane language, graphic violence, and explicit sexual content. FANTASY/CARTOON VIOLENCE VIOLENCE SEX OFFENSIVE LANGUAGE DIALOGUE WITH SEXUAL CONTENT 37 LOCK Feature Customer Caution The V-Chip system that is used in this set is capable of blocking “NR” programs (non rated, not applicable and none) per FCC Rules Section15.120(e)(2). If the option of blocking “NR” programs is chosen “unexpected and possibly confusing results may occur, and you may not receive emergency bulletins or any of the following types of programming:” • Emergency Bulletins (Such as EAS messages, weather warnings and others) • Locally originated programming • News • Political • Public Service Announcements • Religious • Sports • Weather U.S. MOVIES This TV model features the “V-Chip technology” which allows you to use Motion Picture Ratings when viewing movies or video tapes. This innovation allows parents to block various types of movies and video tapes at their discretion. PIP will also be blocked automatically. U.S. MOVIES RATING CHART Press to select U.S. MOVIES. CH CTIO Press to select U.S. MOVIES ON or OFF. N A 1 VOL ON VOL OFF CH LOCK U. S MOVIES OFF VIEW NR PROGRAMS? G PG PG-13 R NC-17 X YES PRESS ACTION TO RETURN 2 CH CTIO Press to select VIEW NR PROGRAMS? YES or NO. N A Press to select VIEW NR MOVIES?. VOL VOL CH YES NO Note: Some movies are not rated for a variety of reasons. Old movies and foreign films are usually not rated. Press to move between different ratings. CH CTIO N A 3 VOL VOL CH Press to select ratings you would like to block (RED) and unblock (GREEN). Continue Step3 for each ratings. Note: See the U.S. MOVIES RATINGS CHART. LOCK U. S MOVIES OFF VIEW NR PROGRAMS? G PG PG-13 R NC-17 X YES PRESS ACTION TO RETURN LOCK U. S MOVIES OFF VIEW NR PROGRAMS? G PG PG-13 R NC-17 X YES PRESS ACTION TO RETURN PG-13, R, NC-17 and X will be blocked. U.S. MOVIES RATINGS CHART NR G PG PG-13 R NC-17 X 38 CONTAINS NO RATING (NOT RATED) AND NA (NOT APPLICABLE) PROGRAMS. Movie has not been rated or rating does not apply. GENERAL AUDIENCES. All ages admitted. PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children. PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for children under 13. RESTRICTED. Under 17 requires accompanying parent or adult guardian. NO ONE 17 AND UNDER ADMITTED. ADULTS ONLY. LOCK Feature Canadian English The V-CHIP used in this TV model allows you to block various types of movies and television programs based on the two rating systems used in Canada. PIP will also be blocked automatically. Press to select CANADIAN ENGLISH. CH CTIO Press to select CANADIAN ENGLISH ON or OFF. N A 1 VOL ON VOL OFF CH LOCK CANADIAN ENGLISH OFF VIEW E PROGRAMS? C C8+ G PG 14+ 18+ YES PRESS ACTION TO RETURN Press to select VIEW E PROGRAMS? CH CTIO Press to select VIEW E PROGRAMS? YES or NO. N A 2 VOL VOL CH YES NO Note: E (Exempt) programming includes: news, sports, documentaries and other information programming, talk shows, music videos, and variety programming. LOCK CANADIAN ENGLISH OFF VIEW E PROGRAMS? C C8+ G PG 14+ 18+ YES PRESS ACTION TO RETURN Press to move between different ratings. CH CTIO N A 3 VOL VOL CH Press to select ratings you would like to block (RED) and unblock (GREEN). Note: See the CANADIAN ENGLISH RATING CHART. LOCK CANADIAN ENGLISH OFF VIEW E PROGRAMS? C C8+ G PG 14+ 18+ YES PRESS ACTION TO RETURN CANADIAN ENGLISH RATINGS CHART E Exempt - Exempt programming includes: news, sports, documentaries and other information programming, talk shows, music videos, and variety programming. C Programming intended for children under age 8. No offensive language, nudity or sexual content. C8+ G Programming generally considered acceptable for children 8 years and over. No profanity, nudity or sexual content. General programming, suitable for all audiences. PG Parental Guidance suggested. Some material may not be suitable for children. 14+ Programming contains themes or content which may not be suitable for viewers under the age of 14. Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and early teens. 18 ADULTS ONLY 39 LOCK Feature Canadian French The V-CHIP used in this TV model also lets you block or unblock Canadian French programs according to various ratings categories. PIP will also be blocked automatically. Press to select CANADIAN FRENCH. CH CTIO Press to select CANADIAN FRENCH ON or OFF. N A 1 VOL VOL ON OFF CH LOCK CANADIAN FRENCH OFF VIEW E PROGRAMS? YES G 8 ANS+ 13 ANS+ 16 ANS+ 18 ANS+ PRESS ACTION TO RETURN Press to select VIEW E PROGRAMS? CH CTIO Press to select VIEW E PROGRAMS? YES or NO. N A 2 VOL VOL CH 3 YES NO Note: E (Exempt) programming includes: news, sports, documentaries and other information programming, talk shows, music videos, and variety programming. LOCK CANADIAN FRENCH OFF VIEW E PROGRAMS? YES G 8 ANS+ 13 ANS+ 16 ANS+ 18 ANS+ PRESS ACTION TO RETURN CH CTIO N A Press to move between different ratings. VOL VOL CH Press to select ratings you would like to block (RED) and unblock (GREEN). Note: See the CANADIAN FRENCH RATINGS CHART. LOCK CANADIAN FRENCH OFF VIEW E PROGRAMS? YES G 8 ANS+ 13 ANS+ 16 ANS+ 18 ANS+ PRESS ACTION TO RETURN 13ANS+, 16ANS+ and 18ANS+ will be blocked. CANADIAN FRENCH RATINGS CHART 40 E Exempt - Exempt programming. G General - Programming intended for audience of all ages. Contains no violence, or the violence content is minimal or is depicted appropriately. 8 ANS+ 8+ General - Not recommended for young children. Programming intended for a broad audience but contains light or occasional violence. Adult supervision recommended. 13ANS+ Programming may not be suitable for children under the age of 13 - Contains either a few violent scenes or one or more sufficiently violent scenes to affect them. Adult supervision strongly suggested. 16ANS+ Programming may not be suitable for children under the age of 16 - Contains frequent scenes of violence or intense violence. 18ANS+ 18 ans +Programming restricted to adults. Contains constant violence or scenes of extreme violence. LOCK Feature Blocking Message If V-Chip is enabled and the program exceeds the rating limit set by you, the blocking message will appear and the audio will be muted. Enter your four-digit secret code if you wish to continue viewing the program. After entering your code, all locks and rating blocks are disabled until the TV is turned off or until all settings are off. Note: If you enter your four-digit secret code to override rating blocks, you must reset all rating blocks by either reprogramming or turning the TV off. PROGRAM RATING EXCEEDED ACCESS CODE Split Screen Blocking Message Split Screen function is available when V-Chip is activated. If the program being viewed in Split Screen exceeds the set rating limit, Split Screen will disappear and a blocking message will be displayed. Note: Enable Split Screen functions by setting Lock Set, U.S. TV PROGRAM, U.S. MOVIES, CANADIAN ENGLISH and/or CANADIAN FRENCH to OFF. PROGRAM RATING EXCEEDED ACCESS CODE PIP Blocking Message PIP function is available when V-Chip is activated. If the program being viewed in PIP exceeds the set rating limit, PIP will disappear and a blocking message will be displayed. Note: Enable PIP functions by setting Lock Set, U.S. TV PROGRAM, U.S. MOVIES, CANADIAN ENGLISH and/or CANADIAN FRENCH to OFF. PIP RATING EXCEEDED HOW LONG? After setting the LOCK SET and V-CHIP SET, set the blocking hours. CH CTIO N A Press to select HOW LONG? VOL VOL CH Press to select 12HOURS/24HOURS/48HOURS / ALWAYS. 12HOURS 24HOURS LOCK LOCK SET V-CHIP SET HOW LONG? CODE ALWAYS 48HOURS OFF BLOCK PROGRAMS : U.S. MOVIES SESTTING: 12HOURS CHANGE CODE PRESS ACTION FOR MAIN MENU 41 Picture in Picture Operation This television includes a two-tuner Picture In Picture (PIP) feature. This allows you to watch two (2) live broadcasts at the same time with or without an external video source such as a VCR, cable box, etc. Basic PIP Operation PIP 1 Press the PIP button on the remote control to display the PIP Frame on screen. Note: Audio is from Main Picture only. SAP POWER TV/VIDEO LIG H T M T ASPEC E UT DVD AUX DTV CBL RC R VC VR TV DB VOL PIP CH VCR CH . RECALL PAGE GUIDE 1 2 3 4 5 6 7 8 R-TUNE Press to select channel for the Main Picture. or Use the remote control numeric keypad. 3 CH CH CTIO N EXIT Select channels for the PIP frame by pressing VOL A BBE MENU PIP CH VCR CH 2 N A S CH CTIO VOL VOL CH Main Picture 1 2 3 9 4 5 6 PROG 7 8 9 0 0 Picture-in-Picture Frame PIP MIN REW PLAY PAUSE STOP FREEZE TV/VCR PIP CH VCR CH PIP SPLIT MOVE PIP MAX FF REC SEARCH OPEN/CLOSE 4 RECALL 5 PIP Press to view picture source status. Press PIP again to cancel the PIP Frame. SWAP SWAP SWAP Press SWAP to switch the PIP and MAIN PICTURE source. A 42 A B B B A Picture in Picture Operation PIP MIN, PIP MAX PIP MIN REW PIP MAX FF These features are used to size PIP Frame. Press PIP MIN REW or PIP MAX FF MAX to size the PIP Frame. Minimum Freeze FREEZE TV/VCR Main Picture During PIP operation this feature is used to stop action in PIP frame. FREEZE 1 Press TV/VCR to stop PIP frame action. 2 Press TV/VCR again to continue action. FREEZE Note: To stop action for Main picture: 1 In PICTURE MENU OTHER ADJ, select FREEZE PIP or SPLIT (see p26). FREEZE FREEZE 2 Press TV/VCR while PIP frame is not displayed. TV/VIDEO Button Main Picture TV/VIDEO Press when PIP frame is displayed to select desired input mode. CH # PIP COMPONENT 1 PIP VIDEO 4 Main Picture PIP COMPONENT 2 PIP VIDEO 3 PIP VIDEO 2 PIP DIGITAL-IN PIP VIDEO 1 Picture-in-Picture Frame Search SEARCH OPEN/CLOSE This feature lets you scan through all available channels. 1 Press 2 Press SEARCH OPEN/CLOSE SEARCH OPEN/CLOSE Search Frames to display search frames. again to stop search feature. This returns the screen to the previous condition (single screen, PIP Main Picture screen or SPLIT screen). Move MOVE This feature is used to move PIP frame to one of four corners. Press MOVE to position PIP frame to desired corner. PIP Frames Main Picture 43 Split Screen This feature lets you watch two different channels side by side with or without an external video source. The audio is from the Main picture only (left side). Split screen enables you to search other channels on the right screen or check video recording status. Splitting the screen 1 SAP POWER TV/VIDEO to display Split screen. LIG H E UT T M T ASPEC SPLIT Press DVD AUX DTV CBL RC R VR VC Main Picture Split Screen TV DB N A S CH CTIO VOL BBE MENU EXIT (The previously selected screen appears.) VOL 2 CH RECALL PAGE Press SPLIT again to return. GUIDE 1 2 3 4 5 6 7 8 9 R-TUNE Returning to one screen. Freezing pictures During Split Screen this feature is used to stop action in SPLIT screen. PROG 0 1 PIP MIN REW PLAY PIP MAX FF PAUSE STOP REC FREEZE TV/VCR PIP CH VCR CH PIP Main Picture SPLIT MOVE FREEZE TV/VCR FREEZE Press TV/VCR to stop action in SPLIT screen. FREEZE SEARCH OPEN/CLOSE SWAP 2 FREEZE Press TV/VCR again to recover. Note: To stop action for Main picture: 1 In PICTURE MENU OTHER ADJ, select FREEZE PIP or SPLIT (see p26). FREEZE 2 Press TV/VCR while SPLIT frame is not displayed. Notes: (1) Sound from the left screen is output from the speakers on the TV set (and headphone jack). (2) When the screen is split, signals of the left screen are output from the rear monitor output terminal. (3) The left and right screens are processed by individual circuits, and therefore, may have slight variation in image quality. (4) Split screen returns to single screen when the TV is turned off. (5) The right and left screens cannot display the same picture at the same time. 44 Split Screen Changing the channels for the Split Screen PIP CH VCR CH Select channels for the Split Screen by PIP CH VCR CH pressing CH SWAP Press SWAP to switch the SPLIT SCREEN and MAIN PICTURE source. . CH10 CH10 CH5 CH10 CH5 CH10 Changing the channels for the Main Picture CH Swapping left and right screens 1 2 3 4 5 6 7 8 9 Viewing Videos TV/VIDEO While Split screen is displayed, press switch modes. TV/VIDEO to 0 Select channels for the Main Picture by pressing CH VIDEO 1 CH10 CH or use the remote control numeric keypad. CH10 Searching the other channels SEARCH OPEN/CLOSE press CH5 SEARCH OPEN/CLOSE to search the other channels. CH10 Search Frames Press SEARCH OPEN/CLOSE again to stop the search. This returns the screen to its previous condition. 45 ASPECT Controls The color monitor will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. ASPECT ASPECT button The aspect mode changes each time the ASPECT button is pressed. SAP POWER TV/VIDEO 4:3 LIG H DVD AUX FULL JUST DTV CBL RC R VC VR Notes: (1) For a 480p signal input during component input signal mode, the mode will change as follows: TV DB BBE MENU FULL N A S CH CTIO VOL CH ZOOM (2) When a 1080i signal is being received, the mode is set to FULL, and aspect switching is not possible. (3) During PIP operation, ASPECT Controls are available only in the main picture according to the receiving signal of the main picture. (4) During SPLIT Screen, ASPECT Controls are not available. RECALL Picture Explanation 4 4 : 3 will display a 4:3 picture at its standard 4:3 size. 4:3 4:3 3 4 16 ZOOM mode magnifies the central section of the picture. ZOOM ZOOM 3 9 4 16 FULL will display the picture at its maximum size but with slight elongation. FULL FULL 3 9 4 16 JUST JUST 4:3 VOL Mode 46 ZOOM T M T ASPEC E UT 3 9 JUST mode will display a 4:3 picture at its maximum size but with aspect correction applied to the sides of the screen so that elongation is only apparent at the left and right edges of the screen. The size of the picture will depend on the original signal. Operating peripheral equipment using the remote control Programming The Illuminated Remote Control Using Access Codes The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component function buttons for VCR, DVD, AUX, RCVR, TV, DTV CABLE or DBS. Follow the procedures for programming your Remote Control with or without a code for the component. Determine the manufacturer of the component and look in the table for the code. 1 Confirm that the external component is plugged in and operating. 2 Turn the component off. A POWER + CH CTIO Press POWER and ACTION together, for at least 5 seconds. After 5 seconds, all the illuminated mode keys will begin to flash. Release the POWER and ACTION keys. N 3 VOL VOL CH 4 DVD AUX DTV CBL R DB TV 5 RC VR VC Press the mode key. The mode key will illuminate steadily, all others will go out. S 1 2 3 4 5 6 7 8 9 Enter the 3-digit component code using the Remote Control numeric keypad. 0 6 POWER Press the Remote Control POWER to test the component. If the procedure is successful, the component will turn on. Default Modes For Remote Control Device Operates TV TV (Panasonic Only) DTV DTV (Panasonic Only) CABLE CABLE (Preset) DBS DBS (Preset) VCR VCR (Preset) DVD/CD DVD and CD (Preset) Personal Video Recorders, AUX Tape and VCR2 RCVR Audio Receiver (Preset) Default Panasonic TV Codes Panasonic DTV Codes Panasonic CABLE Codes Panasonic DBS Codes Panasonic VCR Codes Panasonic DVD Codes Panasonic Personal Video Recorders Code Panasonic RCVR Code Helpful Hints: Unsuccessful Code If the component does not operate with the Remote Control, repeat the procedure using another code. (Some brands have multiple codes). If an incorrect code is entered, or if the procedure takes longer than 30 seconds,the programming will fail. 47 Operating peripheral equipment using the remote control Programming Without A Code (When the code is not known) This procedure searches all codes and is called the “sequence method.” 1 Confirm that the external component is plugged in and on. 2 Turn the component off. SAP POWER TV/VIDEO LIG H E UT T M T ASPEC AUX DTV CBL RC VR A 3 TV + POWER DB VOL CH RECALL 4 DVD AUX DTV CBL R GUIDE DB TV PAGE 1 2 3 4 5 6 7 8 9 R-TUNE S 5 PROG A N CH CTIO VOL PLAY PIP MAX FF PAUSE STOP REC FREEZE TV/VCR PIP CH VCR CH PIP SPLIT MOVE SEARCH OPEN/CLOSE Press the mode key. The mode key will illuminate steadily, all others will go out. Press to move forward to the next code, or to move backward. 0 PIP MIN REW RC VR VC EXIT Press POWER and ACTION together, for at least 5 seconds. After 5 seconds, all the illuminated mode keys will begin to flash. Release the POWER and ACTION key. VOL CH CH CTIO VOL BBE MENU VOL N A S CH CTIO N DVD R VC VOL CH 6 POWER SWAP Press the Remote Control POWER to test the component. If the procedure was successful, the component will turn on. CH CTIO After the code is found, press ACTION to store the code. N 7 A Note: Repeat the above steps until the component code is found. It may take many attempts before the correct code is found. VOL VOL CH Note: The step and set mode will start from the current device (not the beginning of the list, except for the first time). 48 Operating peripheral equipment using the remote control Infrared Codes Index The remote control is capable of operating many brands of peripheral equipment. Refer to pages 50 and 51 for programming procedures. Note: The remote control memory is limited and therefore some models may not operate. The remote control is not designed to control all features available in all models. Note: After entering the proper infrared code, press the desired Mode Selection Button on the remote control. Refer to pages 16 and 47 - 48 for details on operating peripheral equipment using the remote control. Infrared Remote Codes for Specific Components Helpful Hint: Write down the code numbers for your components in the space provided below. This will serve as a handy reference whenever you need to reprogram your remote control. CABLE VCR CD Cable Box Video Cassette Recorder Compact Disc Player DBS RCVR LD Digital Broadcast System Receiver or Amplifier Laser Disc Player Other Component Other Component Other Component Other Component Other Component Other Component Codes for VCR R VC Brand Admiral Aiwa Akai Audio Dynamic Bell &Howell Broksonic Canon Citizen Craig Curtis Mathes Daewoo DBX Dimensia Emerson Fisher Funai GE Goldstar Gradiente Hitachi Instant Replay Jensen JVC Kenwood LXI Magnavox Marantz Marta Memorex MGA Minolta Mitsubishi Multitech NEC Olympic Optimus Code 335 332 314, 315, 316, 329 311, 339 305, 313 320, 326 323, 325 306 305, 306, 329 324, 345 301, 324, 343 310, 311, 339 345 303, 319, 320, 325, 326, 343 305, 307, 308, 309, 313 320, 326, 334 324, 333, 345 306 334 300, 323, 345 323, 324 339 310, 311, 334, 339 306, 310, 311, 339 300, 305, 306, 307, 308, 309 323, 324, 331 310, 311, 339 306 309, 324 338, 340, 341, 347, 348 300, 345 338, 340, 341, 347, 348 304, 347 310, 311, 334, 339 323, 324 306, 321, 328, 335 Brand Orion Panasonic J.C.Penney Pentax Philco Philips Pioneer Proscan Quasar Radio Shac RCA Realistic Samsung Sansui Sanyo Scott Sears Sharp Shintom Signature 2000 Singer Sony Sylvania Tashiro Tatung Teac Technics Teknika Toshiba Vector Research Wards Yamaha Zenith Code 320, 326 321, 322, 323, 324 300, 305, 310, 311, 324, 339, 345 300, 311, 345 320, 323, 324, 326, 331, 343 323, 324, 331 323 300, 301, 302, 323, 324, 331, 333, 345, 346 321, 322, 323, 324 305, 309, 324, 333, 336, 340 300, 301, 302, 323, 324, 331, 333, 345, 346 305, 309, 324, 336, 340 302, 304, 333 320, 326, 339, 352 305, 309, 313 301, 302, 304, 309, 320, 326, 338, 340, 347, 348 300, 305, 306, 307, 308 335, 336 317 335 317 328, 329, 330 323, 324, 331 306 310, 311, 339 310, 311, 339 321, 322, 323, 324 324 301, 346 311 306, 309, 335, 336, 344 305, 310, 311, 339 306, 344 49 Operating peripheral equipment using the remote control Codes for Personal Video Recorders R VC Brand Panasonic Replay Philips Tivo Sony Tivo Code 100 101 102 Codes for DVD DVD Brand Denon Ferguson JVC Mitsubishi Nordmende Panasonic Philips Pioneer RCA Code 100 101 109 105 101 100 103 102 101 Brand Saba Samsung Sharp Sony Technics Thomson Toshiba Yamaha Zenith 101 110 108 104 100 101 103 100 107 Code Brand Optimus Panasonic Philips Pioneer Quasar RCA Sansui Sanyo Scott Sharp Sherwood Sony Soundesign Teac Technics Victor Yamaha Code 208, 218, 220, 222 224, 225, 227 229, 230 208 224, 225, 227 231, 237, 238, 247 210, 246 205 210, 246 242, 243 220 228 244 212, 216, 218 224, 225, 227 240, 241, 245 202, 203, 204 Brand Philips Pioneer RCA Sansui Sharp Sony Teac Technics Yamaha Code 222 204 226, 227, 228 205, 210 231 219, 220 210, 211, 215 216, 218 201, 202 Codes for CD DVD Brand Admiral Aiwa Carver Denon Emerson Fisher Harman/Kardon Hitachi Jensen JVC Kardon Kenwood LXI/Sears Magnavox Marantz McIntosh Nakamichi Onkyo Code 226 233, 235 229 242 239 205 219, 220, 221, 223 207 234 240, 241, 245 223 200, 201, 211, 245 236 229, 232 229 221 210 214, 215 Codes for Cassette Deck AUX 50 Brand Aiwa Denon Fisher Jensen JVC Kenwood Marantz Nakamichi Onkyo Panasonic Code 223, 224, 225 231 203 214 229, 230 200, 207 202 205 208, 209, 213 216, 218 Operating peripheral equipment using the remote control Codes for Receivers RC VR Brand Admiral Aiwa Denon Fisher Garrard Harman Kardon Jensen JVC Kenwood Magnavox Marantz Mclntosh Nakamichi Onkyo Code 120 125, 126 134, 135, 136 104 113 115, 123 129 132, 133 100, 108 127 124 116 106 109, 114 Brand Optimus Panasonic Philips Pioneer Quasar RCA Sansui Sharp Sony Soundesign Teac Technics Victor Yamaha Code 103, 127, 130, 131 118, 119, 121 123 105, 107 118, 119, 121 103, 105, 127, 130, 131 103, 111, 139 134, 137 122 138 111, 112, 113 118, 119, 121 132, 133 101, 102 Code 124 125, 132 105, 132 105, 122 112, 113 124, 125, 132 129 134 105, 132 122 111, 119, 120, 121, 122, 123, 124, 125, 126, 127 112, 118, 140, 141, 142, 145 103, 124 103, 104, 105 133 130 105, 132 102, 137, 139 109, 110, 114 106, 107, 128, 129, 130 101, 116 105, 132 Brand Puser RCA Realistic Regal Regency Rembrandt Samsung Scientific Atlanta Slmark Sprucer Stargate Tel eview Texscan Tocom Toshiba Unika Universal Videoway Viewstar Zenith Zenith /Drae Satellite Code 132 115 132 112, 118, 140, 141, 142, 145 134 105, 132, 137 105 111, 112, 113 101, 105 105, 110 105, 132 101, 105 144 135 104 125, 132 122, 132 106 129, 130 100, 117 100 Code 105, 115, 116 Brand Magnavox Panasonic Philips Primestar Proscan RCA Sony Star Choice Toshiba Uniden Code 101, 102 104 101, 102 108 106, 109, 110, 113 106, 109, 110, 113 107 103, 108 100 101, 102 Codes for Cable Box CBL Brand ABC Archer Cableview Citizen Curtis Diamond Eagle Eastern GC Brand Gemini General Instrument/Jerrold Hamlin Hitachi Macom Magnavox Memorex Movietime Oak Panasonic Philips Pioneer Pulsar Codes for DBS DB S Brand Dish Network (Echostar) Echo Star Express VU G.E. G.I. (General Instrument) Gradiente Hitachi HNS (Hughes) 105 105, 115 106 108 114 103, 111, 112 103 51 Operating peripheral equipment using the remote control Mode Operational Key Chart This chart defines which keys that are operational after programming (if needed), while in the selected remote control mode TV, DTV, CABLE, DBS, VCR, DVD ...etc. KEY NAME TV MODE DTV MODE CABLE MODE DBS MODE POWER POWER POWER POWER POWER SAP ON/OFF - - - MUTE TV MUTE CBL MUTE TV MUTE TV ASPECT DTV ASPECT - DBS ASPECT TV INPUT SW TV INPUT SW TV INPUT SW TV INPUT SW REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS CHANNEL UP/DOWN NAVIGATION UP/DOWN ACTION ACTION ENTER DBS ACTION VOL + / - NAVIGATION RIGHT/LEFT CABLE VOL + / - DBS NAVIGATION RIGHT/LEFT - MENU - DBS MENU DISPLAY PROGRAM INFO. TV DISPLAY DBS PROG.INFO - EXIT (EPG)ELECTRONIC PROGRAM GUIDE - DBS EXIT - - - DBS PAGE UP/DOWN - GUIDE (EPG)ELECTRONIC PROGRAM GUIDE - DBS GUIDE Select Channel Select Channel Select Channel Select Channel PREVIOUS CHAN OR VIDEO MODE PREVIOUS STB CHAN CABLE PREVIOUS DBS PREVIOUS - DTV PROGRAM/DASH - DBS PROGRAM/DASH PIP MINIMIZE/ MAXIMIZE - - - - - - - - - - - - - - - - Info (EPG) ELECTRONIC PROGRAM GUIDE VCR RECORD DBS RECORD PIP FREEZE - - TV/DBS SWITCH PIP or SPLIT CHAN UP/DOWN - TV CHANNEL UP/DOWN DBS CHANNEL UP/DOWN PIP SEARCH - - - PIP ON/OFF - - - SPLIT ON/OFF - - - MOVE PIP - - - PIP or SPLIT SWAP - - - SAP MUTE ASPECT TV/VIDEO CH CTIO N A LIGHT VOL VOL CH BBE MENU RECALL EXIT PAGE GUIDE 1 2 3 4 5 6 7 8 9 CABLE CHANNEL UP/DOWN DBS NAVIGATION UP/DOWN 0 PIP MIN REW PIP MAX FF PLAY PAUSE STOP REC FREEZE TV/VCR PIP CH VCR CH SEARCH OPEN/CLOSE PIP SPLIT MOVE SWAP 52 Operating peripheral equipment using the remote control KEY NAME POWER SAP VCR MODE (DVD) DVD MODE (CD) AUX MODE (VCR2) (TAPE) RCVR MODE POWER POWER POWER POWER POWER POWER - - - - - - TV MUTE TV MUTE RCVR MUTE TV MUTE RCVR MUTE RCVR MUTE - - - - - - TV INPUT SW TV INPUT SW - TV INPUT SW TV INPUT SW TV INPUT SW MUTE ASPECT TV/VIDEO LIGHT CH CTIO N A REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS VOL VOL CH BBE MENU RECALL EXIT PAGE GUIDE 1 2 3 4 5 6 7 8 9 VCR CHAN UP/DOWN NAVIGATION UP/DOWN NEXT/PREVIOUS VCR CHANNEL TRACK UP/DOWN TV ACTION SELECT TV VOLUME +/- NAVIGATION UP/DOWN - DVD MENU - - - - ONSCREEN VCR DISPLAY DVD DISPLAY TIME FORMAT ONSCREEN VCR DISPLAY - - - - - - - - - SKIP +/- SKIP +/- - - - - TITLE NEXT TRACK - - - Select Channel Select Chapter Number Select Track Number Select Channel - - - - - DECK A/B - - - - - - - VCR REW/FF SKIP SEARCH <<REW/>>FF SEARCH REW/FF VCR REW/FF TAPE REW/FF SURROUND -/+ PLAY PLAY PLAY PLAY PLAY - PAUSE PAUSE PAUSE PAUSE PAUSE - STOP STOP STOP STOP STOP - VCR RECORD - - VCR RECORD TAPE RECORD - TV/VCR SWITCH - - TV/VCR SWITCH - - VCR CHANNEL UP/DOWN - - VCR CHANNEL UP/DOWN - - - OPEN/CLOSE OPEN/CLOSE - OPEN/CLOSE - - - - - - - - - - - - - - - - - - - - - - - - - - TV ACTION - TUNER +/- - - RCVR VOLUME TV VOLUME +/- RCVR VOLUME +/- RCVR VOLUME +/UP/DOWN 0 PIP MIN REW PIP MAX FF 1.... AV1 2.... AV2 3.... AV3 4.... AV4 5.... CD 6.... TUNER 7.... PHONO 8.... TAPE 9.... AUX PLAY PAUSE STOP REC FREEZE TV/VCR PIP CH VCR CH SEARCH OPEN/CLOSE PIP SPLIT MOVE SWAP 53 Manual de instrucciones [Resumen] Instalación de las pilas en el control remoto Se necesitan dos pilas AA. 2. Instale las pilas como se muestra 1. Ponga el control remoto con el en el compartimiento de las pilas. lado de los botones hacia abajo. (Las polaridades + y – deberán Retire la cubierta presionando coincidir con las marcas hacia abajo sobre la marca y correspondientes del deslizándola en el sentido compartimiento). indicado. 3. Vuelva a poner la cubierta y deslícela hasta que quede bloqueada. Dos pilas tamaño AA Precauciones relacionadas con el uso de las pilas Consejos útiles La instalación incorrecta de las pilas puede causar fugas en las mismas y corrosión, lo que dañará el control remoto. Tenga en cuenta las precauciones siguientes: 1. Las pilas deberán sustituirse siempre en pares. Utilice siempre pilas nuevas cuando sustituya las pilas viejas. 2. No mezcle una pila usada con otra nueva. 3. No mezcle pilas de tipos diferentes (ejemplo: "carbono y cinc" con "alcalinas"). 4. No intente cargar, cortocircuitar, desarmar, calentar o quemar las pilas usadas. 5. Las pilas tendrán que sustituirse cuando el control remoto funcione esporádicamente o no pueda controlar el televisor. A los usuarios que utilizan frecuentemente el control remoto se les recomienda sustituir las pilas viejas por pilas alcalinas que duran más. Consejos útiles Siempre que retire las pilas, puede que necesite volver a poner las claves del control remoto de infrarrojos. Le recomendamos anotar la clave de la página 49 antes de preparar el control remoto. Conexión del cable de la antena al terminal de entrada de RF Conexión de la antena • Para recibir correctamente los canales de VHF/UHF se necesita una antena externa. Para obtener la mejor recepción se recomienda una antena exterior. El modo de antena deberá ponerse en TV. • Cable de entrada desde antena doméstica Conecte la antena doméstica a ANT1 del panel posterior del televisor. Seleccione el modo del televisor y ANT1 en el menú SET UP. (El modo de televisión por cable ha sido prefijado en la fábrica. Los usuarios de antenas deberán cambiar al modo del televisor y seleccionar ANT1 en el menú SET UP bajo Programación de canales. Cable de entrada de antena doméstica Antena de VHF Antena de UHF DIGITAL IN COMPONENT VIDEO INPUT Mezclador 1 Y VIDEO PB ANT1 Cable coaxial de 75 ohmios PR SPLIT OUT ANT2 Cable de entrada de compañía de televisión por cable 2 INPUT 1 2 3 S-VIDEO PROG OUT VIDEO L L R R AUDIO TO AUDIO AMP 75 ohmios, VHF/ UHF, panel posterior del televisor Notas: (1) Para obtener una imagen y un sonido de calidad óptima se necesita una antena, el cable correcto (coaxial de 75 ohmios) y la clavija de terminación correcta. (2) Si se utiliza un sistema de antena comunitaria, tal vez necesite emplear una clavija y un cable de conexión correctos entre el zócalo de antena de pared y su receptor de televisión. (3) El centro de servicio de televisión de su localidad o su concesionario podrán ayudarle a obtener el sistema de antena correcto para su zona particular y los accesorios necesarios. (4) Cualquier tema relacionado con la instalación de la antena, la mejora de los sistemas o accesorios existentes requeridos y los gastos incurridos son responsabilidad exclusiva de usted, el cliente. 54 Conexión/desconexión de la alimentación Conexión del enchufe a un tomacorriente Nota: Los tipos de los enchufes principales cambian según los países. Por lo tanto, el enchufe de alimentación mostrado a la izquierda tal vez no sea igual al tipo de enchufe de su aparato. Cómo conectar la alimentación Presione el interruptor POWER del televisor para encenderlo. Alimentación encendida: Rojo Cuando el aparato esté encendido, pulse el interruptor POWER para apagarlo. STANDBY: Apagado Ejemplo: La pantalla de abajo se visualiza durante un rato después de encenderse el televisor. (La condición del ajuste es un ejemplo.) Sensor del control remoto CH 3 JUSTO SAP SAP POWER TV/VIDEO LIG H DVD AUX DTV CBL RC R VC VR POWER TV DB CH CTIO Presione el botón POWER del control remoto para encender el televisor: Rojo Presione el botón POWER del control remoto para apagar el televisor: Apagado (espera). N A S VOL BBE MENU VIVIDO T M T ASPEC E UT VOL CH RECALL Nota: El televisor consumirá algo de energía siempre que el cable de alimentación esté conectado a una toma de corriente. Selección del idioma del menú En el menú SET UP, seleccione IDIOMA/LANGUE para cambiar el idioma del menú a ENGLISH (inglés), ESPAÑOL o FRANCAIS (francés). (Consulte la página 20.) 55 VHF, UHF y CATV TERMINAL DE ANTENA EN EL PANEL POSTERIOR DEL TELEVISOR A la entrada de antena Cable de entrada desde la antena o sistema de televisión por cable SAP POWER TV/VIDEO LIG H T M T ASPEC E UT DVD AUX DTV CBL R RC VR VC INPUT 4 ACTION TV/VIDEO VOLUME CHANNEL HPJ OUTPUT S-VIDEO VIDEO L-AUDIO-R TV DB INPUT DECODIFICADOR DE TELEVISIÓN POR CABLE CH CTIO N A S VOL VOL INPUT 4 ACTION TV/VIDEO VOLUME CHANNEL • • Sensor del control remoto TV Televisión por cable Presione TV 1 para controlar el televisor con el control remoto. 2 Presione para encender el televisor (consulte la página 13). POWER Presione para seleccionar el canal deseado. CH CTIO VOL Confirmación Confirme que el registro con la televisión por cable y la conexión del equipo hayan sido completados. Encienda el sintonizador de televisión por cable y seleccione el nivel de volumen necesario. VOL 1 CH Seleccione el nivel del volumen deseado. 4 CH CTIO 2 VOL VOL CH Notas: (1) El número del canal y el nivel del volumen se fijan incluso después de apagar el televisor. (2) El consumo de energía y el aullido del sonido se pueden reducir si se baja el nivel del volumen. CBL Presione CBL para confirmar. Presione mientras apunta el control remoto hacia el decodificador de televisión por cable. Nota: El número de la clave del control remoto está fijado para los productos Panasonic. Cuando los equipos periféricos no funcionen, reponga la clave (consulte las páginas 49-50). N A Cuando el cable de la antena se conecte al terminal de antena del televisor vía un decodificador de televisión por cable o una videograbadora, seleccione el canal del televisor CH3 o CH4. Esto no se hace cuando la señal entra desde VIDEO INPUT. N A 3 56 S-VIDEO VIDEO L-AUDIO-R La operación se puede hacer desde el televisor. Selectores de canales Controles de volumen Interruptor de la alimentación VHF y UHF HPJ 3 Seleccione el nivel del volumen deseado utilizando el sintonizador de TV por cable. Operaciones básicas con menús Presione para visualizar la pantalla de menú. CH CTIO N A 1 VOL VOL Presione para seleccionar el icono de menú deseado. Presione para entrar en campo del menú secundario. CH Presione para seleccionar la función de menú secundario deseada. Presione para seleccionar o ajustar. CH CTIO N A 2 VOL VOL CH IMAGEN MODO COLOR TINTE BRILLO CONTRASTE NITIDEZ NORMAL OTROS AJ. : SALIR VIVIDO NO : SUBMENU IMAGEN MODO VIVIDO COLOR TINTE BRILLO CONTRASTE NITIDEZ NO NORMAL OTROS AJ. PRESIONE ACTION PARA MENU IMAGEN MODO VIVIDO COLOR TINTE BRILLO CONTRASTE NITIDEZ NO NORMAL OTROS AJ. PRESIONE ACTION PARA MENU COLOR 35 PRESIONE ACTION PARA REGRESAR [para OTROS AJ.] CH CTIO N A Presione para seleccionar OTROS AJ. VOL VOL Presione para entrar en el campo del menú secundario. CH Prosiga con la selección y el ajuste del menú de opciones. IMAGEN MODO COLOR TINTE BRILLO CONTRASTE NITIDEZ NORMAL OTROS AJ. PARA ENTRAR PRESIONE ACTION PARA MENU IMAGEN TEMP COLOR AZUL COLOR NATURAL SI REDUC DE RUIDO NO 3D Y/C FILTRO SI MATRIZ COLOR SD SI MV INMOVILIZAR IDI OTROS AJ. PRESIONE ACTION PARA MENU Presione para retornar. CH CTIO IMAGEN MODO VIVIDO COLOR TINTE BRILLO CONTRASTE NITIDEZ NO NORMAL OTROS AJ. PRESIONE ACTION PARA MENU N A Para volver a MANÚ principal: Para volver a la pantalla anterior: VOL VOL CH COLOR 35 PRESIONE ACTION PARA REGRESAR CH CTIO N A Para finalizar los ajustes: VOL VOL CH Presione para salir de la pantalla MENÚ. Así vuelve a la condición de visión normal. IMAGEN MODO COLOR TINTE BRILLO CONTRASTE NITIDEZ NORMAL OTROS AJ. : SALIR VIVIDO NO : SUBMENU IMAGEN NORMAL 57 Operaciones básicas con menús PICTURE IMAGEN MODO COLOR TINTE BRILLO CONTRASTE NITIDEZ NORMAL OTROS AJ. : SALIR VIVIDO SI : SUBMENU OTROS AJ. PRESIONE ACTION PARA MENU AUDIO MODO SONIDO IA SI BAJOS BAJOS BBE VIVA 3D SI ALTOS ALTOS BBE SI BALANCE BALANCE ENVOLVENTE 3D ESTEREO SPA MONO SI NORMAL NORMAL ALTAVOCES SI OTROS AJ. PRESIONE ACTION PARA REGRESAR OTROS AJ. PARA ENTRAR PRESIONE ACTION PARA MENU OTROS AJ. PRESIONE ACTION PARA MENU CANALES CANALES CANALES BUSQUEDA TODO BUSQUEDA PREFIJADO FAVORITOS ELIJA CANAL 3 CANALES FAVORITOS 2 5 8 10 18 25 : AGREGAR : ELIMINAR FAVORITOS MANUAL OTROS AJ. PRESIONE ACTION PARA MENU CHANNELS TEMP COLOR NORMAL COLOR NATURAL SI REDUC DE RUIDO NO 3D Y/C FILTRO SI MATRIZ COLOR SD MV SI INMOVILIZAR IDI AUDIO AUDIO MODO AUDIO IMAGEN IMAGEN MODO COLOR TINTE BRILLO CONTRASTE NITIDEZ NORMAL OTROS AJ. PARA ENTRAR PRESIONE ACTION PARA MENU PONGA TITULO OTROS AJ. PARA ENTRAR PRESIONE ACTION PARA MENU CANALES PREFIJADO ABC A&E CBS AMC FOX BET NBC BRAVO PBS CNBC CNN CNN/SI ESPN COMEDY HBO COURT PRESIONE PARA MAS CNLS PRESIONE ACTION PARA REGRESAR CANALES MANUAL ELIJA CANAL PARA MOVER CURSOR PARA ESCOGER CANAL PRESIONE ACTION PARA REGRESAR DIA NO CRONOM1 CRONOM1 10 PONGA IDENTIDAD CRONOMETRO APAGADO APAGAR ELIJA CANAL RELOJ FIJO NO PRESIONE ACTION PARA REGRESAR BLOQUEO CREAR CLAVE CRONOMETRO ENCENDER RELOJ TIMER CANALES PONGA TITULO COMPONENTE1 COMPONENTE2 ENT. DIG. VIDEO1 VIDEO2 VIDEO3 VIDEO4 PARA MOVER CURSOR PARA SELECCIONAR ETIQUETA PRESIONE ACTION PARA REGRESAR CRONOMETRO LUN VIE CRONOM2 PRESIONE ACTION PARA MENU OTROS AJ. PRESIONE ACTION PARA REGRESAR PRESIONE ACTION PARA REGRESAR BLOQUEO BLOQUEO BLOQUEO V - CHIP INGRESAR CLAVE NO PROGRAMAS : PELICULAS DE EEUU PROGRAMACION: TIEMPO? LOCK CLAVE PRESIONE ACTION PARA MENU AJUSTE IDIOMA/ LANGUE ANTENA EN MUDO MODO OTROS AJ. ESPAÑOL ANT1 NO NO PARA ENTRAR SET UP PRESIONE ACTION PARA MENU 58 PRESIONE ACTION PARA MENU PRESIONE ACTION PARA MENU AJUSTE MODO CABLE PROGRAMA AUTO PROGRAMA MANUAL AUTOENCENDIDO NO CANAL INFO. SI OTROS AJ. CORR GEOMAGNETICA PARA CONTINUAR PRESIONE ACTION PARA REGRESAR 12HORAS CAMBIO DE CLAVE AJUSTE PARA CONTINUAR IMAGEN NO SI ES RECOMENDADO OTROS AJ. PRESIONE ACTION PARA REGRESAR PREPARACIÓN Selección de MODO Para seleccionar CABLE o TV. CH CTIO Pulse para seleccionar CABLE o TV. N A Pulse para seleccionar MODO. VOL VOL CABLE TV CH AJUSTE MODO CABLE PROGRAMA AUTO PROGRAMA MANUAL AUTOENCENDIDO NO CANAL INFO. SI OTROS AJ. CORR GEOMAGNETICA PARA CONTINUAR PRESIONE ACTION PARA REGRESAR PROGRAMA AUTOMÁTICO Para programar automáticamente todos los canales con una señal. CH CTIO Pulse para iniciar PROGRAMA AUTO. N A Pulse para seleccionar PROGRAMA AUTO. VOL VOL CH AJUSTE MODO CABLE PROGRAMA AUTO PROGRAMA MANUAL AUTOENCENDIDO NO CANAL INFO. SI OTROS AJ. CORR GEOMAGNETICA PARA CONTINUAR PRESIONE ACTION PARA REGRESAR PROGRAMA MANUAL Para agregar o eliminar canales manualmente. Para seleccionar PROGRAMA MANUAL. CH CTIO N A 1 VOL VOL Pulse para visualizar el siguiente menú. CH 2 1 2 3 4 5 6 7 8 9 Utilice el teclado del control remoto para seleccionar el canal deseado. AJUSTE MODO CABLE PROGRAMA AUTO PROGRAMA MANUAL AUTOENCENDIDO NO CANAL INFO. SI OTROS AJ. CORR GEOMAGNETICA PARA CONTINUAR PRESIONE ACTION PARA REGRESAR PROGRAMA MANUAL ELIJA CANAL 0 3 PARA AGREGAR PARA ELIMINAR Pulse para AGREGAR o ELIMINAR el canal. CH CTIO N A 3 VOL VOL CH 59 Ubicación de los controles Control remoto iluminado Botón de la alimentación Púlselo para encender o apagar el televisor (consulte la página 13). Nota: El cable de la alimentación del televisor deberá enchufarse primero al tomacorriente, y el televisor encenderse luego con el interruptor POWER (modo de espera). Botón ASPECT Cambia el tamaño de la pantalla (consulte la página 46). 4:3 ACERC COMP JUSTO Botón MUTE Presione este botón para silenciar el sonido, y púlselo de nuevo para cancelar el silenciamiento. Botones de selección de modo Seleccionan el modo de funcionamiento para el control remoto. (Consulte la página 48.) Selección del modo de disco de vídeo digital para el control remoto Selección del modo de videograbadora para el control remoto Selección del modo auxiliar para el control remoto DVD RC VR DTV CBL Selección del modo de receptor/ amplificador para el control remoto DB TV Selección del modo de televisor para el control remoto AUX R VC Satélite de emisión digital para el control remoto Selección del modo de televisión por cable para el control remoto S Selección del modo de televisor digital para el control remoto R-TUNE Botón R-TUNE Cambia al canal o modo de vídeo anterior. Funcionamiento de otro dispositivo Botones Aparato Televisor PIP MIN REW PIP MAX FF PLAY Minimizar/maximizar la imagen en imagen Videograbadora CABLE/DBS - DVD/LD/CD RECEPTOR Sonido envolvente -/+ Buttons Aparato Televisor REC FREEZE TV/VCR STOP - - Pausa Parada - - Pausa Parada - - PIP CH VCR CH Subida/bajada de canal para imagen en imagen o pantalla dividida Subida/bajada de canal para videograbadora Subida/bajada de canal para televisor/DBS Videograbadora CABLE/DBS 60 PAUSE DVD/LD/CD - - RECEPTOR - - SEARCH OPEN/CLOSE Ubicación de los controles Botón TV/VIDEO El modo de entrada cambia cada vez que se presiona este botón. TV COMPONENTE 1 VIDEO 4 VIDEO 3 COMPONENTE 2 VIDEO 2 ENT. DIG. VIDEO 1 Botón SAP Selecciona el modo de audio (consulte la pagina 27). ESTEREO SPA MONO Encendido y apagado de la iluminación del control remoto. R-TUNE SAP POWER TV/VIDEO LIG H T DVD AUX DTV CBL RC R VC VR RECALL Cambia al siguiente canal superior Mueve el cursor hacia arriba durante el modo del menú. DB TV N EXIT VOL CH RECALL PAGE GUIDE 1 2 3 4 5 6 7 8 9 R-TUNE PROG 0 PIP MIN REW PLAY PIP MAX FF PAUSE STOP REC FREEZE TV/VCR PIP CH VCR CH SPLIT MOVE CH CTIO VOL Visualiza el menú CH Presione para BBE RECALL MENU acceder a los menús DTV, DBS o DVD. Durante el modo del televisor pulse para Cambia al siguiente canal seleccionar BBE VIVA inferior SÍ o BBE VIVA NO. Mueve el cursor hacia abajo durante el modo del menú. Subida/bajada de página para DBS, salto +/- para DVD y CD. EXIT PAGE Presione para visualizar la hora, el canal, el cronometrados de apagado y otras opciones. GUIDE Botón GUIDE para DBS. Retorna a la visión normal desde la pantalla MENÚ. Elemento anterior en MENÚ. Botones de selección directa de números de programas SEARCH OPEN/CLOSE PROG PIP VOL Aumenta el volumen Mueve el cursor hacia la derecha durante el modo del menú. N VOL BBE MENU Reduce el volumen Mueve el cursor hacia la izquierda durante el modo del menú. CH CTIO A S A M T ASPEC E UT Enciende los botones del control remoto. El botón seleccionado parpadea cuando está encendido. La iluminación del control remoto se puede encender y apagar presionando el botón RECALL mientras se presiona el botón R-TUNE. SWAP Botón PROG raya Programa números de canales para DTV y DBS. Cambia imágenes en la pantalla dividida y en la operación de imagen en imagen (consulte la página 42, 45). Mueve el cuadro PIP en la operación de imagen en imagen (consulte la página 43). Pantalla dividida (consulte la página 44) Operación de imagen en imagen (consulte la página 42). 61 Troubleshooting Chart Before calling for service, determine the symptoms and follow suggested solutions. Symptoms Symptoms VIDEO VIDEO AUDIO AUDIO Solutions Solutions Snowy Video Noisy Audio Adjust Antenna Location and Connection Multiple Image Noisy Audio Adjust Antenna Location and Connection Check Antenna Lead-in Wire Interference Noisy Audio Move Television away from Electrical Appliances, Lights, Vehicles and Medical Equipment Normal Video No Audio Increase Volume Check Mute Check Television SPEAKERS on/off Change Channel No Video with Snow Noisy Audio Set TV or Cable Mode Properly Check Antenna Cables No Video / No PIP No Audio Check Power Cord is Plugged into Active Outlet Adjust Brightness and Audio Controls Change Channel Check Cable Connections Program the Remote Control Again Check Second Video Source Operation No Color Normal Audio Adjust Color Settings Change Channel Normal Video Wrong Audio Check Audio Is Set To Stereo or Mono, Not SAP Black Box on Screen Normal Audio Change CC (Closed Captioning) from Text Mode Normal Video Normal Audio Replace Remote Control Batteries Intermittent Remote Control Operation Cleaning To ensure continued excellent performance by this product, periodic cleaning is recommended. 62 The unit contains many plastic parts. For this reason DO NOT use benzine, thinner or other chemicals to clean the unit. Dust will accumulate on the picture screen. Please wipe with a soft cloth from time to time. If you use a chemically treated cloth, please be careful to follow the instructions that come with the cloth. DO NOT bring into contact with insecticide or other volatile substances. DO NOT allow the unit to come into contact for extended periods with rubber or vinyl products. Remove dirt and soiling by wiping with a light cloth. Even if the unit is heavily soiled, do not apply cleaner directly to the unit. Soak a cloth in a solution of neutral cleanser thinned with water. Then wring out the cloth, wipe the unit clean, and finish by wiping with a dry cloth. Specifications CT-34WX53 Power Source AC 120 V, 60 Hz Power Consumption Average use : 165 W (Maximum Current 3.7 A) Stand-by condition : 0.2 W CRT 34-inch, 16 : 9 aspect ratio Screen Size 29.33 ” (745.0 mm) (W) × 16.50 ” (419.0 mm) (H) × 33.65 ” (854.7 mm) (diagonal) Dimensions (W×H×D) 35.31 ” (897mm) × 25.35 ” (644 mm) × 23.15 ” (588 mm) Mass (Weight) 175 lb. (79.5 kg) Net Channel Capability-181 VHF-12 : UHF-56 : Cable-125 Speaker Sound Audio Output Headphone FEATURES 2 Speakers 30 W [ 15 W + 15 W ] ( 10 % THD ) M3 (3.5 mm) Jack × 1 Two screen display fuctions BBE VIVA CLOSED CAPTION 3D Y/C FILTER LINEAR PIP V-Chip Remote control Transmitter EUR7603ZD0 Accessories Supplied AA Battery × 2 Operating Conditions Temperature : 34 °F - 104 °F (0 ° – 40 °C) Humidity : 20 % - 80 % (non-condensing) Connection Terminals AV INPUT 1- 4 VIDEO 1.0 Vp-p (75 Ω) (Phono Jack Type) S-VIDEO Y : 1.0 Vp-p (75 Ω), C : 0.286 Vp-p (75 Ω) (Mini DIN 4-pin) AUDIO L-R 0.5 Vrms (Phono Jack Type × 2) AV PROG. OUT VIDEO 1.0 Vp-p (75 Ω) (Phono Jack Type) AUDIO L-R 0.5 Vrms (Phono Jack Type × 2) TO AUDIO AMP AUDIO L-R 0.5 Vrms (Phono Jack Type × 2) COMPONENT VIDEO INPUT1-2 Y PB / PR AUDIO L-R 1.0 Vp-p (including synchronization) ± 0.35 Vp-p 0.5 Vrms (Phono Jack Type × 2) DIGITAL IN INPUT DVI 1.0 AUDIO L-R 24 pin 0.5 Vrms (Phono Jack Type × 2) Note: Design and Specifications are subject to change without notice. Weight and Dimensions shown are approximate. 63 Customer’s Record The model number and serial number of this product can be found on its back cover. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes. Model Number Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 Serial Number Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico Inc. (“PSC”) Ave. 65 de Infanteria, Km 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Panasonic Canada Inc. 5770 Ambler Drive Mississauga, Ontario L4W 2T3 Printed in Japan MBS0403O0 ">

Public link updated
The public link to your chat has been updated.
Advertisement