Panasonic PV9D53 Operating Instructions

TV/DVD Combination
Operating Instructions
Model No.
PV-9D53
DIGITAL VIDEO
*Ability to play back may depend on recording conditions.
As an ENERGY STAR® Partner, Matsushita Electric Corporation
of America has determined that this product or product model
meets the ENERGY STAR® guidelines for energy efficiency.
Please read these instructions carefully before attempting to connect, operate,
or adjust this product. Please save this manual.
Spanish Quick Use Guide is included.
(Guía para rápida consulta en español está incluida.)
TV/CATV MODE SELECTION
When shipped from the factory, the TV/CATV menu option is set to the “CATV.”
(Cable Television) mode. If not using CATV, set this menu option to the “TV” position.
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
5E90501A COV/WO-MP3
1
22/05/2003, 18:55
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle is
intended to alert the user to the
presence of uninsulated dangerous
voltage within the product's
enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the partly responsible for compliance with
the FCC Rules could void the user's authority to operate this equipment.
CAUTION:
THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.
Location of the required Marking
The rating sheet and the safety caution
are on the rear of the unit.
TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE
READ THIS OWNER'S MANUAL CAREFULLY AND RETAIN
FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE
MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION-SEE SERVICE PROCEDURE.
USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT
TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED.
DO NOT STARE INTO BEAM.
CERTIFICATION: COMPLIES WITH
FDA RADIATION PERFORMANCE
STANDARDS, 21 CFR SUBCHAPTER J.
2
5E90501A P02-05/WO-MP3
2
22/05/2003, 18:56
IMPORTANT SAFEGUARDS
1. READ INSTRUCTIONS
All the safety and operating instructions should be read before the unit is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the unit and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning the exterior cabinet only.
6. ATTACHMENTS
The manufacturer of this unit does not make any recommendations for attachments, as they may cause
hazards.
7. WATER AND MOISTURE
Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool.
PORTABLE CART WARNING
(symbol provided by RETAC)
8. ACCESSORIES
Do not place this unit on an unstable cart, stand, tripod, bracket, or table.
The unit may fall, causing serious injury, and serious damage to the unit.
8A. An appliance and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and cart
combination to overturn.
9. VENTILATION
Slots and openings in the cabinet back or bottom are provided for ventilation,
S3126A
and to ensure reliable operation of the unit, and to protect it from overheating.
These openings must not be blocked or covered. The openings should never be blocked by placing the unit
on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat
source. This unit should not be placed in a built-in installations such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions have been adhered to.
10. POWER SOURCES
This unit should be operated only from the type of power source indicated on the rating plate. If you are not
sure of the type of power supply to your home, consult your appliance dealer or local power company. For
units intended to operate from battery power, or other sources, refer to the operating instructions.
11. GROUNDING OR POLARIZATION
This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the
other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug, if your unit is equipped
with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This too, is a safety feature. If you are unable to insert the plug into the outlet, contact
your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the grounding-type plug.
3
5E90501A P02-05/WO-MP3
3
22/05/2003, 18:56
IMPORTANT SAFEGUARDS
12. POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point
where they exit from the appliance.
13. LIGHTNING
To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the
unit due to lightning and power line surges.
14. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such power lines or circuits, as
contact with them might be fatal.
15. OVERLOADING
Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short
out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.
17. OUTDOOR ANTENNA GROUNDING
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is
grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the
National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for
the grounding electrode.
18. SERVICING
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
19. DAMAGE REQUIRING SERVICE
Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following
conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions, as an improper adjustment of other controls
may result in damage and will often require extensive work by a qualified technician to restore the
unit to its normal operation.
e. If the unit has been dropped or the cabinet has been damaged.
f . When the unit exhibits a distinct change in performance, this indicates a need for service.
20. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician uses replacement parts specified by
the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
21. SAFETY CHECK
Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to
determine that the unit is in proper operating condition.
22. HEAT
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
23. DISC TRAY
Keep your fingers clear of the disc tray as it is closing. It may cause serious personal injury.
24. CONNECTING
When you connect the product to other equipment, turn off the power and unplug all of the equipment from
the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's
manual of the other equipment carefully and follow the instructions when making any connections.
25. SOUND VOLUME
Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume
sound may cause hearing or speaker damage.
4
5E90501A P02-05/WO-MP3
4
22/05/2003, 18:56
IMPORTANT SAFEGUARDS
26. SOUND DISTORTION
Do not allow the product to output distorted sound for an extended period of time. It may cause speaker
overheating and fire.
27. HEADPHONES
When you use the headphones, keep the volume at a moderate level. If you use the headphones continuously with high volume sound, it may cause hearing damage.
28. LASER BEAM
Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the
laser beam. It may cause eye damage.
29. DISC
Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious
personal injury and product malfunction.
30. NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
EXAMPLE OF ANTENNA GROUNDING AS PER THE
NATIONAL ELECTRICAL CODE
ANTENNA LEAD
IN WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
NEC-NATIONAL ELECTRICAL CODE
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
S2898A
CONDENSATION
Moisture will form in the operating section of the player if the player is brought from cool surroundings
into a warm room or if the temperature of the room rises suddenly. When this happens, player's
performance will be impaired.
To prevent this, let the player stand in its new surroundings for about an hour before switching it on, or
make sure that the room temperature rises gradually.
Condensation may also form during the summer if the player is exposed to the breeze from an air
conditioner. In such cases, change the location of the player.
5
5E90501A P02-05/WO-MP3
5
22/05/2003, 18:56
Safety precautions
WARNING!
INSTALL THE TV/DVD IN YOUR CAR
• For a car equipped with air bags, be sure to follow the manufacturer’s instructions whenever performing any
electrical wiring work. Incorrect wiring can cause the air bag system of a car to malfunction.
• Never cut the insulation from the power supply lead in an attempt to draw power for another device.
Doing so can overload the current capacity of the lead, creating the danger of fire and electric shock.
• For proper installation and wiring special technical knowledge is required. If you have any doubts about
where to position or how to install components, contact the retailer where you purchased the product, your
automobile dealership, or an automotive service provider. Note that you will be charged separately for
installation work.
• Use all of the components that come with this product only as directed. Improper use of components can
damage interior components or result in improper anchoring of components, which creates the danger of
accident and personal injury.
• Improper installation creates the danger of fire and accident.
• Take care so wires are not pinched between chassis parts, by screws or by the seat as it slides on its rails,
etc. Such conditions can cut wires and cause shorts, creating the danger of accident, electric shock, and fire.
• Avoid installation in areas subject to strong vibration and areas where secure anchoring cannot be achieved.
Components installed in such areas can work loose, creating the danger of accident and personal injury.
• Never install the TV/DVD on the dashboard or in any other location where it obstructs forward vision.
• Never attach the stand to the roof of your car. Doing so creates the danger of the TV/DVD falling down.
• Never attach the stand to a sharply angled surface or to a surface that causes the TV/DVD to face downwards.
Such installation can cause the TV/DVD to fall.
• Be sure to turn the ignition key of the car to the “OFF” position before connecting or disconnecting wires and
cables. Failure to do so creates the danger of electric shock and personal injury.
DRIVING SAFETY
• Never watch the TV/DVD or try to adjust settings while driving. Doing so creates the danger of traffic accident.
Before operating the TV/DVD, be sure to stop the car in a safe area.
• Never install the unit on the dashboard or in any other location where it obstructs forward vision. Items that
obstruct forward vision in a motor car may be illegal.
Also, make sure that all components are installed where they do not interfere with operation of the steering
wheel, shift lever, brake pedal, etc., for example under the driver’s seat, and where they do not endanger
passengers. Improper installation creates the danger of traffic accident and personal injury.
• Make sure all cables are bundled together so they do not interfere with car operation, as described in this
manual. Improperly installed cables create the danger of entanglement with the steering wheel, shift lever,
brake pedal, etc.
IMPORTANT NOTES:
• The unit is designed for use with a 12V DC automotive power supply. Never use it in a truck, bus, or any
other car that has a 24V power supply.
• Be sure to stop your car in a safe area before watching or adjusting the TV/DVD.
• Operating the TV/DVD for a long time with the engine of your car stopped can run down your car’s battery.
• Never leave the TV/DVD in areas exposed to temperature extremes or strong direct sunlight. Leaving it in a
closed car, in direct sunlight, near a heater, etc. can cause deformation of the case. Using this product in
areas that are colder than 5°C (41°F) or hotter than 40°C (104°F) can result in poor image quality.
• Never use benzene or other chemical agents for cleaning.
Chemicals can damage the case and remove markings. Use a soft cloth moistened with a weak solution of
water and mild neutral detergent. Wring out all excess moisture from the cloth before wiping.
• Never drop the TV/DVD or otherwise subject it to strong impact.
• Should the TV/DVD ever begin to emit smoke, abnormal odor, or a strange noise, immediately turn off power
and unplug the unit from the cigarette lighter socket. Continued use of the TV/DVD under any of these
conditions creates the danger of fire and electric shock.
• Do not continue to use the TV/DVD if it is malfunctioning and does not produce a video image or sound.
Whenever you notice such symptoms, immediately turn off power, unplug the TV/DVD from the cigarette
lighter socket. Continued use of the TV/DVD creates the danger of fire and electric shock.
• When you leave your car unattended for long periods, be sure to unplug the TV/DVD from the cigarette
lighter socket. Leaving the TV/DVD plugged in can run down the car’s battery.
This product utilizes both a Cathode Ray Tube (CRT) and other components that contain lead. Disposal
of these materials may be regulated in your community due to environmental considerations. For
disposal or recycling information please contact your local authorities, or the Electronics Industries
Alliance: <http://www.eiae.org.>
6
5E90501A P06-11/WO-MP3
6
22/05/2003, 18:56
Contents
Before using your unit
Advanced Function
IMPORTANT SAFEGUARDS ........................... 3
Safety precautions ............................................ 6
Contents ............................................................ 7
Features ............................................................ 8
Disc information ................................................ 9
Parts and functions ......................................... 10
Remote control ................................................ 11
Power sources ................................................ 12
Antenna connections ....................................... 13
Cable TV connections ..................................... 14
Zooming/Locating desired scene .................... 29
Repeat/Random/Program playback
and Repeat A-B ............................................... 30
Marking desired scenes .................................. 31
Changing soundtrack language/Subtitles ........ 32
Changing angles/Title selection/DVD menu .... 33
TV operation
Setting the on screen display language .......... 15
TV operation.................................................... 16
Closed caption ................................................ 18
To memorize channels .................................... 19
Setting the V-Chip ........................................... 21
Picture control adjustment ............................... 24
Stereo and second audio program (SAP) ....... 25
Playback operation
Preparation/Status display of disc ................... 26
Playback procedure ........................................ 27
Special playback ............................................. 28
Additional Information
Setting language ............................................. 34
Setting the aspect ratio of TV screen/
Setting on screen display ................................ 35
Dynamic Range Control .................................. 36
Parental control setting ................................... 37
To change the parental level ........................... 38
Temporary disabling of rating level
by DVD disc ..................................................... 39
Language code list .......................................... 40
Reception disturbances ................................... 41
Connections to other equipment ..................... 42
Problems and troubleshooting ......................... 44
Specifications .................................................. 46
Index of Controls ............................................. 48
Spanish Quick Use Guide (Guía para
rápida consulta) ............................................... 50
Limited Warranty ............................................. 54
Customer Services Directory ........................... 55
Index .................................................. Back cover
Accessories
Remote Control
(076N0GV010)
Batteries 2 “AAA”
(1411004015)
Telescopic Antenna
(125C108027)
12V DC Car Cord
(121B164101)
Region Management Information
This unit is designed and manufactured to respond to the Region
Management Information that is recorded on a DVD disc. If the
Region number described on the DVD disc does not correspond to
the Region number of this unit, this unit cannot play this disc.
• The region number of this player is “1.”
• The player will play DVD-Video marked with labels containing “1”
or “ALL.”
Example:
7
5E90501A P06-11/WO-MP3
7
22/05/2003, 18:56
Features
Color TV With DVD/CD player
Unique space saving design combines a 9" color TV and a DVD/CD player.
The DVD disc has much more capacity, but is the same size as the audio CD disc. Picture/Audio quality of the DVD
exceeds other software. Picture quality is higher than Super VHS. Audio quality is higher than audio CD. The DVD
also has special options; audio language selection, subtitle language selection or multi-angle, etc.
The DVD PLAYER can play back video CDs and audio CDs.
High Quality Picture
Horizontal Resolution
More than 500 lines. It exceeds Super VHS (400 lines) or Laser Disc (430 lines) in resolution.
Compatible with a wide range of DVD audio outputs
Digital Audio Jack (Coaxial)
• When a component with a built-in Dolby Digital decoder is connected, Dolby Digital sound can produce the effect
of being in a movie theatre or a concert hall.
• Surround standard different from Dolby Digital. This format is already in use in many theatres. By connecting this
unit to a DTS decoder or an AV amplifier with a built-in DTS decoder, the DTS audio of DVD discs recorded in this
format can be enjoyed. However, audio will not be output from the analog audio output jacks.
• By connecting this unit to an AV amplifier with a built-in MPEG decoder, the MPEG audio of DVD discs recorded
in this format can be enjoyed.
• The Linear PCM sound of a 48 kHz/24 bit through 96 kHz/24 bit exceeds audio CD sound.
Convenience Features
Direct selection of your desired scenes using Title/Chapter/Time/Track - You can play back from the desired
scene.
Recalling Up to 3 Scenes (DVD only) - You can program up to 3 scenes in memory and recall the marked scenes.
Frame Advance - The PAUSE/STILL moves one frame at a time.
Slow Motion - The SLOW moves you back and forth through the program by 4 steps of 1/8-1/2 times.
Repeat Playback - You can repeat chapter, track, title, sides or material between two selected points.
Program Playback - You can play back tracks in programmed sequences.
Zoom (DVD only) - You can zoom in the selected subject on the screen during playback.
Note: Make sure that discs are suitable for the following functions.
Multi-Language - Maximum 32 language subtitles and maximum 8 language soundtracks can be played back for
movies or programes.
Multi-Angle - Pictures of Sports or a Live Concert are recorded with many cameras. When you play such a disc,
you can change the angles during playback.
Parental Control - You can limit the play back of scenes or sounds of adult DVD discs which have parental level.
Video Aspect Ratio - You can change the aspect ratio of the screen for your monitor.
TV Features
120V AC or DC Operation - This TV/DVD is designed to operate from household AC current or from a 12V DC
car cigarette lighter socket.
181 Channel Tuner - Receives standard VHF and UHF broadcast channels and up to 113 cable channels. The
actual number of channels received depends upon channel reception in your area or your cable system.
Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for
hearing impaired viewers.
Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.
Programmable TV Sleep Timer - Operable from the remote control, the TV can be programmed up to 120
minutes to turn off automatically.
On-Screen 3 Language Display - You can select one of 3 languages, English, Spanish or French for on-screen
programming.
V-Chip - The V-Chip function can read the rating of a TV program or movie content if the program is encoded
with this information. V-chip will allow you to set a restriction level.
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use
of this copyright protection technology must be authorized by Macrovision Corporation and is intended for
home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
8
5E90501A P06-11/WO-MP3
8
22/05/2003, 18:56
Disc information
Discs that can be played
Disc type
Disc
Logo
Disc formats supported by this
unit
DVD-Video
• DVD-Video format
Video CD
• Video-CD format
CD-DA
• CD-DA format
CD-R
CD-RW
• CD-DA format
• Video-CD format
• Discs played 8 cm (3") or 12 cm (5")
Discs which cannot be played with this unit
• DVD with Region No. other
• CD-ROM
than “1” or “ALL”
• CDV
• DVD of PAL system
• CVD
• DVD-ROM
• CD-G
• DVD-AUDIO
• CD-TEXT
• DVD-RW
• SACD
• DVD+RW
• Photo-CD
Disc Handling
Handling precautions
• Do not attach sticker to discs. (Do not use
discs with exposed adhesive from tape or
left over peeled-off stickers.)
• Only hold disc by
edges as shown.
Fingerprints, dirt, and
scratches can cause
skipping and distortion.
• Do not write on label
side of disc.
• Never use record
cleaning sprays,
benzine, thinner,
static electricity
Disc tray
prevention
liquids, or any
Disc
other solvent.
• Be careful not
to drop or bend disc.
• Do not place more than 1 disc on disc tray.
• Do not try to close disc tray when disc is
not properly placed.
• Always store discs in their proper cases
when not in use.
Definition of Terms
Angle
Some DVD discs feature scenes simultaneously shot from different
angles. The ANGLE button can be used to view the scene from different angles.
Chapter Number
Titles are subdivided into numbered sections. You can quickly search
for a favorite scene using these numbers.
DVD
A high-density optical disc on which high-quality pictures and sound
have been digitally recorded. DVD incorporates new video compression technology (MPEG II) and high-density recording technology
which allow entire movies to be recorded with incredible playback
quality.
Playback Control
With Video CD (version 2.0), scenes or information may be selected
for viewing or listening from an interactive menu that appears on the
TV screen.
Subtitles
Written dialogue which appears at the bottom of the screen.
Time Number
The elapsed play time from the start of a disc or title. Use to quickly
find scenes. (May not work with some discs.)
Title Number
For DVD discs with two or more titles, the title is numbered as title 1,
title 2, etc.
Track Number
Numbers assigned to tracks on Video CDs and CDs to allow specific
tracks to be quickly located.
Video CD
CD containing picture and sound with same quality level as video
tape. This unit also supports Video CDs with playback control (version 2.0).
To clean disc surface
With a soft, damp (water only) cloth, gently
wipe from the center hole to the outer edge
as shown below. (Wiping in a circular pattern
will scratch the surface.)
If disc is brought from a cold to a warm
environment, moisture may form on the
disc
Wipe away moisture with a soft, dry, lint-free
cloth before using disc. (See above.)
Improper disc storage
Discs could be damaged if stored or left in
areas:
• exposed to direct sunlight.
• that are humid or dusty.
• near heat (i.e. heater, radiator, etc.).
9
5E90501A P06-11/WO-MP3
9
22/05/2003, 18:56
Parts and functions
Front
STOP button Disc tray
OPEN/CLOSE button
SKIP buttons
Headphones jack
Power indicator
AUDIO IN
(L/R) jacks
Remote sensor
POWER button
VIDEO IN jack
VOLUME +/– buttons
CHANNEL UP/DOWN buttons
PLAY button
Rear
DC input jack
RF IN jack
AUDIO (L/R)/ VIDEO OUT jacks
COAXIAL DIGITAL AUDIO OUT jack
AC power cord
10
5E90501A P06-11/WO-MP3
10
22/05/2003, 18:56
Remote control
Page
POWER
Power On/Off
15,16,26
TV
Switch to operate TV/AV
15
DVD
Switch to operate DVD
26
OPEN/CLOSE
Open or Close the tray
27,39
0-9
Direct channel selection of TV
Input setting
Enter a password
INPUT
Switch between TV/AV
VOL +/–
Adjust volume of TV
DISPLAY
Call TV information
Call DVD information
DVD MENU
Display DVD menu
SETUP/TV MENU
TV mode - Display menu of TV
15,19~24
DVD mode - Call up initial setup mode
34~38
CH
/
16,20
29,30
21,23,37~39
43
16
17,22
26
33
Select channel of TV
Cursor buttons
17
15,19~24
27,29,31,33~38
ENTER
Enter information in the menu
15,21,23
27,29~31,33~39
RETURN
Remove DVD set up menu
CANCEL
Reset information in the menu 21,23,24,29~31,37,38
34~39
STOP
Stop
PLAY
Playback
27,30
PAUSE/STILL
Pause CD sound
Still picture of DVD
28
SKIP +/–
Skip chapter to forward or reverse
direction
28
27,28,30,33,39
SEARCH +/–
Fast Forward/Review playback
28
ANGLE
Change playback angle
33
AUDIO
Switch the sound of TV
Change sound track language
25
32
SLOW +/–
Forward/Reverse- slow motion
28
SUB TITLE
Set subtitle
32
TITLE
Select title
33
PLAY MODE
Select playback mode
30
R-TUNE/ZOOM
Switch between present/last channel
Zoom
17
29
MARKER
Index
31
CC/JUMP
Switch between TV/Caption/Text in
Closed Caption mode
Locating desired scene
18
29
REPEAT A-B
Repeat playback between A and B
30
SLEEP
Sleep timer
17
MUTE
Switch off the sound
17
11
5E90501A P06-11/WO-MP3
11
22/05/2003, 18:56
Remote control
Power sources
BATTERY INSTALLATION
TO USE AC POWER
Open the battery compartment cover in the direction of
the arrow.
Install two "AAA" batteries, paying attention to the
polarity diagram in the battery compartment.
Use the AC polarized line cord provided for operation
on AC. Insert the AC cord plug into a standard 120V
60Hz polarized AC outlet.
NOTES:
• Never connect the AC line cord plug to anything other
than the specified voltage (120V 60Hz). Use the attached power cord only.
• If the polarized AC cord does not fit into a
nonpolarized AC outlet, do not attempt to file or cut
the blade. It is the user's responsibility to have an
electrician replace the obsolete outlet.
• If you cause a static discharge when touching the
unit, and the unit fails to function, simply unplug the
unit from the AC outlet, wait a few minutes, and
plug it back in. The unit should return to
normal operation.
Replace the compartment cover.
AC Outlet
OPERATION
• Aim the remote control at the remote sensor and
press control buttons to operate.
• Operate the remote control within 30° angle on
either side of the remote sensor, up to a distance of Approx. 5 meters.
Wider Hole
and Blade
Polarized AC Cord Plug
(One blade is wider than the other)
TO USE DC POWER
Approx. 5 meters
(15 FEET)
NOTES:
• Do not leave the remote control unit exposed to direct
sunlight or in hot or humid places.
• The remote control unit uses infrared beams to
transmit signals, so sunlight or fluorescent light on the
remote sensor may shorten operating distance.
• Incorrect use of batteries may cause them to leak or
burst. Read the battery warnings and use the batteries properly.
• Do not mix old and new batteries.
• Remove batteries if the remote control will not be
operated for an extended period of time.
By using the DC car cord supplied with the TV/DVD,
you can operate this TV/DVD from a cigarette lighter
socket in any car that utilizes a negative ground
system.
The fused 12V DC car cord has been designed to
power the set from the external DC power (12 volt
negative ground) through the TV/DVD DC input jack.
Connect the smaller plug on the end of the cord to the
DC input jack on the rear of the TV/DVD, then insert
the other end of the car cord into the cigarette lighter
socket of your car. Make sure that the cord makes a
firm connection. It may be necessary to try several
insertions, rotating the plug for proper electrical
connection.
TV/DVD
CAR
To Cigarette
Lighter Socket
To DC Input Jack
Car Cord (supplied)
12
5E90501A P12-17/WO-MP3
12
22/05/2003, 18:56
Antenna connections
NOTES: • ALWAYS TURN THE TV/DVD TO “OFF”
BEFORE SWITCHING THE IGNITION OF
THE CAR ENGINE.
• Make sure that the negative terminal of the
battery is grounded.
This set is designed for use with negative
grounding systems only.
• Use the supplied car cord only.
• When the TV/DVD is not in use, always disconnect it from the car cigarette lighter socket to
avoid a battery drain.
• If the TV/DVD is to be directly connected to a
12V DC power source, for example, recreational vehicle (RV) applications, make sure
the power cord is connected after the ignition
switch to avoid battery drain.
• Do not operate the TV/DVD if the car battery is
weak. Peak current from the car alternator could
blow the DC fuse.
• Check the battery’s charge level regularly
when the TV/DVD is used in a vehicle.
REPLACING THE FUSE IN THE CAR
BATTERY CORD PLUG
If the fuse in the car battery cord plug blows, replace
it with a new 8 A fuse (Fast Blow Type) as shown
below. Unscrew the tip of the plug to remove.
PLUG
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your
antenna system. If you are using a cable TV service
(CATV), see page 14 for Cable TV connections.
Combination VHF/UHF Antenna
(Single 75 ohm cable or 300 ohm
twin-lead wire)
Connect the 75 ohm cable from the combination VHF/
UHF antenna to the Antenna Jack.
If your combination VHF/UHF antenna has a 300 ohm
twin-lead wire, the use of the 300-75 ohm Matching
Transformer may be necessary.
Antenna Jack
Antenna Jack
75 ohm
Coaxial
Cable
300-75 ohm Matching Transformer
Combination VHF/UHF Antenna
(Separate VHF and UHF 300 ohm
twin-lead wires)
Connect the UHF 300 ohm twin-lead wire to the Combiner
(not supplied). Connect the VHF 300 ohm twin-lead
wire to the 300-75 ohm Matching Transformer. Attach
the Transformer to the Combiner, then attach the
Combiner to the Antenna Jack.
Antenna Jack
300-75 ohm Matching
Transformer
8A FUSE
TIP
Combiner
UHF 300 ohm
VHF 300 ohm
Please use correct fuse.
Separate VHF/UHF Antennas
(75 ohm VHF cable and 300 ohm UHF
twin-lead wires)
Connect the VHF 75 ohm cable and UHF 300 ohm
twin-lead wire to the Combiner (not supplied). Attach
the Combiner to the Antenna Jack.
Antenna Jack
VHF 75 ohm
Combiner
UHF 300 ohm
13
5E90501A P12-17/WO-MP3
13
22/05/2003, 18:56
Cable TV connections
This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable
TV Converter box. Some cable companies offer “premium pay channels” in which the signal is
scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device
which is generally provided by the cable company.
FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE
Antenna
Jack
For basic cable service not requiring a Converter/Descrambler
box, connect the CATV 75 ohm Coaxial Cable directly to the
Antenna Jack on the back of the TV/DVD.
75 ohm
Coaxial Cable
FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE
If you subscribe to a cable TV service which requires the use of a Converter/Descrambler box, connect the
incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial Cable,
connect the output jack of the Converter/Descrambler box to the Antenna Jack on the TV/DVD. Follow the
connections shown below. Set the TV/DVD to the output channel of the Converter/Descrambler box (usually
channel 3 or 4) and use the Converter/Descrambler box to select channels.
Incoming
75 ohm
CATV Cable
75 ohm Cable to
TV/DVD
Converter/
Descrambler
Antenna
Jack
FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH
SCRAMBLED PREMIUM CHANNELS
If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the
use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available from
the Cable company or an electronics supply store). Follow the connections shown below. With the switch in the “B”
position, you can directly tune any nonscrambled channels on your TV/DVD. With the switch in the “A” position, tune
your TV/DVD to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/
Descrambler box to tune scrambled channels.
Converter/
Descrambler
Incoming
75 ohm
CATV Cable
Splitter
A/B Switch
A
75 ohm Cable
to TV/DVD
Antenna
Jack
B
14
5E90501A P12-17/WO-MP3
14
22/05/2003, 18:56
Setting the on screen display language
You can choose from three different languages (English, French and Spanish) for the on-screen displays.
Adjustment menus and messages will appear in the language of your choice.
On-screen language selection (step 5) will automatically appear on the screen when you press the TV MENU
button initially. Select the language you prefer first, then proceed with the other menu options.
To turn on the TV/DVD, press POWER. The Power indicator
1 will
light. Press TV to select TV mode.
• Every time you press POWER, the TV/DVD starts from TV
mode.
TV MENU.
2 Press
The TV menu screen will appear.
Press
or
until the OPTION
3 menu
appears.
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
<
/
/
/
/MENU
>
or
to select the
Press
4 “LANGUAGE”
option, then press
or
button.
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
<
/
/
/
/MENU
>
Press
or
to select the
5 desired
language: English
(ENGLISH), Spanish
(ESPAÑOL) or French
(FRANCAIS), then press
ENTER.
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
<
/
/ENTER/MENU
>
Press TV MENU until the MENU
screen is cleared.
NOTES:
• If the unit does not operate properly
(by the buttons on the unit and/or the
remote control) disconnect the AC
cord, wait a few minutes and plug it
back in. Static electricity, etc., may have
affected the player's operation.
• The TV section has its own menu and also
DVD section has its own menu (see page
34).
15
5E90501A P12-17/WO-MP3
15
22/05/2003, 18:56
TV operation
turn on the TV/DVD, press POWER. Press TV to select TV
1 To
mode.
the volume level by
2 Adjust
pressing VOL + or – . The
volume level will be indicated on
the screen by green bars. As the
volume level increases, so do
the number of bars. If the volume
decreases, the number of green
bars also decreases.
the TV/CATV menu
3 Set
option to the appropriate
position. (See page 19.)
VOLUME
32
TV
- VHF/UHF channels
CATV - CABLE TV channels
the Direct Channel selection
4 Press
buttons to select the channel.
TV Mode Direct Channel Selection
When the TV/CATV menu option is
in the TV position, all channels can
be instantly selected by using two
buttons. (for example, to select
channel 2, press “0”, then “2”. If
you press only “2”, channel
selection will be delayed for a few
seconds.) For channels 10 and
above, press the 2 digits in order.
CH 012
CATV Mode Direct Channel Selection
When the TV/CATV menu option is in the CATV position, channels
can be selected as follows:
TO SELECT CATV CHANNELS:
1-9:
Press “0” twice, then 1-9 as needed. Example, to select
channel 2, press "002".
10-12:
Press “0”, then the remaining 2 digits. Example, to
select channel 12, press "012".
13-99:
Press the 2 digits in order. Example, to select channel
36, press "36".
100-125: Press the 3 digits in order. Example, to select channel
120, press "120".
NOTE FOR CHANNELS 1-12:
If only 1 or 2 buttons are pressed, the corresponding channel
will be selected in 2 seconds.
TV
VHF
2-13
UHF
14-69
NOTES:
• If a channel with no broadcast is
selected, the sound will automatically be muted.
• If a station being viewed stops
broadcasting, the TV will automatically shut itself off after 15 minutes.
CATV
VHF
2-13
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100) (125)
01
(5A)
16
5E90501A P12-17/WO-MP3
16
22/05/2003, 18:56
CHANNEL
Press and release CH
or
. The
channel automatically stops at the
next channel set into memory.
For proper operation, before selecting channels, they should be set into
the memory. See pages 19 and 20
“To memorize channels”.
NOTE: CH ▲ or ▼ on the remote con
trol does not operate in DVD
mode.
DISPLAY
Press DISPLAY to display the
current information on the screen.
Press DISPLAY again to clear the
call display.
• Channel number or VIDEO mode
• Stereo or SAP (second audio
program) audio status
• Audio output status
STEREO SAP
CH 012
SEL. MONO+SAP
R-TUNE
This button allows you to go back to
the last channel selected by pressing R-TUNE. Press R-TUNE again
to return to the last channel you
were watching.
MUTE
Press MUTE to switch off the sound.
The TV/DVD’s sound will be silenced
and “MUTE” will briefly appear on the
screen. The sound can be switched
back on by pressing this button
again or one of the VOL + or –
buttons.
SLEEP
To set the TV/DVD to turn off after a
preset amount of time, press SLEEP
on the remote control. The clock will
count down 10 minutes for each press
of SLEEP (120, 110, ...10, 0). After the
sleep time is programmed, the display
will appear briefly every ten minutes
to remind you that the sleep timer is
operating. To confirm the sleep timer
setting, press SLEEP and the remaining time will be displayed for a few
seconds. To cancel the sleep timer,
press SLEEP repeatedly until the display turns to 0.
5E90501A P12-17/WO-MP3
17
22/05/2003, 18:56
MUTE
SLEEP
120
17
Closed caption
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display Closed Captioned television programs. Closed Captioning
will display text on the screen for hearing impaired viewers or it will translate and display text in another language.
Captions: This Closed Caption Mode will display text on the
screen in English or another language (depending on the setting of the Closed Captions CH 1/2).
Generally, Closed Captions in English are transmitted on Captions Channel 1 and Closed Captions in other languages are
transmitted on Captions Channel 2.
The Captions will appear in places on the screen where they will
least interfere with the picture, usually on the bottom of the screen.
News programs will usually show three-line Closed Captions
which scroll onto the screen.
Most other shows provide two or three lined Captions placed
near the character who is speaking so the viewer can follow the
dialogue. Words in italics or underlined describe titles, words in
foreign languages or words requiring emphasis. Words that are
sung usually appear enclosed by musical notes.
Text: The Text Closed Caption Mode will usually fill the screen
with a programming schedule or other information.
After selecting a Closed Caption Mode, it will stay in effect until
it is changed, even if the channel is changed.
If the Captions signal is lost due to a commercial or a break in
the signal, the Captions will reappear when the signal is received
again. If the channels are changed, the Captions will be delayed
approximately 10 seconds.
For television programs broadcasting with Closed Captions, look
in your TV guide for the Closed Captions symbol (CC).
TO VIEW CLOSED CAPTIONS
Press CC to switch between
normal TV and the two closed
caption modes (captions and full
screen text). Closed captioning will
display text on the screen for
hearing impaired viewers.
NOTES:
• When selecting Closed Captions, the captioning will be delayed approximately 10 seconds.
• If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode.
• Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal with
Closed Captioning, especially with live programs. This is because during live programs, captions are also
entered live. These transmissions do not allow time for editing.
• When Captions are being displayed, on-screen displays, such as volume and mute may not be seen or may
interfere with Closed Captions.
• Some cable systems and copy protection systems may interfere with the Closed Captioned signal.
• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear or
may appear with strange characters or misspelled words. In this case, adjust the antenna for better reception
or use an outdoor antenna.
18
5E90501A P18-23/WO-MP3
18
22/05/2003, 18:56
To memorize channels
This TV/DVD is equipped with a channel memory feature which allows channels to skip up or down to the next
channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV/DVD’s memory. In addition to normal VHF and UHF channels, this TV/DVD can receive up
to 113 Cable TV channels. To use this TV/DVD with an antenna, set the TV/CATV menu option to the TV mode.
When shipped from the factory, this menu option is in the CATV mode.
TV/CATV SELECTION
TV to select TV mode,
1 Press
then press TV MENU. The TV
menu screen will appear.
Press
or
until the SET UP
2 menu
appears.
TV/CATV
ADD/DELETE
AUTO CH MEMORY
<
or
3 Press
CATV” option.
/
/
/
/MENU
CATV
ADD
>
to select the “TV/
TV/CATV
ADD/DELETE
AUTO CH MEMORY
<
/
/
/
/MENU
CATV
ADD
>
or
to select the TV
4 orPress
CATV mode.
TV - VHF/UHF channels
CATV - CABLE TV channels
TV/CATV
ADD/DELETE
AUTO CH MEMORY
<
/
/
/
/MENU
TV
ADD
>
TV MENU until the MENU
5 Press
screen is cleared.
CATV CHART
The chart below is typical of many cable system channel allocations.
19
5E90501A P18-23/WO-MP3
19
22/05/2003, 18:56
To memorize channels
AUTOMATIC MEMORY TUNING
TV to select TV mode, then press TV MENU.
1 Press
The TV menu screen will appear.
or
until SET UP menu
Press
2 appears.
TV/CATV
ADD/DELETE
AUTO CH MEMORY
<
/
/
/
CATV
ADD
>
/MENU
Press
or
to select the “AUTO
3 CH
MEMORY”, then press
or .
TV/CATV
ADD/DELETE
AUTO CH MEMORY
The TV will begin memorizing all the
channels available in your area.
<
4
/
/
/
CATV
ADD
>
/MENU
Press TV MENU until the MENU
screen is cleared.
TO ADD/DELETE CHANNELS
the desired channel to be
1 Select
memorized or deleted using Direct
Channel Selection (0-9), or CH
or
.
TV MENU. The TV
2 Press
menu screen will appear.
Press
or
3 appears.
until SET UP menu
TV/CATV
ADD/DELETE
AUTO CH MEMORY
<
Press
or
4 DELETE”.
/
/
CATV
ADD
>
/
/MENU
to select the “ADD/
TV/CATV
ADD/DELETE
AUTO CH MEMORY
<
5
/
/
/
CATV
ADD
>
/MENU
Press
or
to select ADD or
DELETE, whichever function you
want to perform.
TV/CATV
ADD/DELETE
AUTO CH MEMORY
Press TV MENU until the MENU
6 screen
is cleared.
<
/
steps 1-6 for other channels
7 Repeat
you want to add or delete.
20
5E90501A P18-23/WO-MP3
20
22/05/2003, 18:56
/
/
CATV
DELETE
>
/MENU
Setting the V-Chip
This TV/DVD is equipped with a V-Chip Controller which provides you with channel viewing access
controls and restrictions. This function is to prevent your children from watching violence or sexual
scenes, that you may choose to exclude.
To use the V-Chip function, you must register a password.
TO REGISTER PASSWORD
Press TV to select TV mode, then press TV MENU.
1 The
TV menu screen will appear.
Press
or
until the OPTION
2 menu
appears.
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
<
/
/
/
/MENU
>
Press
or
to select the “V3 CHIP
or
.
SET”, then press
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
<
/
/
/
/MENU
>
the password (4 digits)
4 Enter
using Direct Channel Selection
(0-9), then press ENTER.
• If you put a wrong number, press
CANCEL.
V-CHIP SET
NEW
PASSWORD
<0
:
9/ENTER/CANCEL/MENU
>
" " appears instead of the number.
the same password again
5 Enter
for confirmation, then press
ENTER.
Now the password is registered
and the V-Chip setting menu will
appear on the display.
V-CHIP SET
CONFIRM
PASSWORD
<0
:
9/ENTER/CANCEL/MENU
>
NOTES:
• To avoid forgetting the password, write
it down and keep in a safe place.
• If you forget the password, turn the
volume level into a minimum, then
press VOL – on the unit and 0 on the
remote control for more than 1 second
simultaneously.
21
5E90501A P18-23/WO-MP3
21
22/05/2003, 18:56
Setting the V-Chip
TO SET THE V-CHIP
SET menu, press
1 In theor V-CHIP
to select the “TV
V-CHIP SET
V-CHIP
TV RATING
MOVIE RATING
CHANGE PASSWORD
RATING”.
<
Press
or
to display the
2 desired
setting.
OFF :
TV-Y :
TV-Y7 :
TV-G :
TV-PG:
TV-14 :
TV-MA:
TV RATING is not set
All children
7 years old and above
General Audience
Parental guidance
14 years old and above
17 years old and above
/
/
/
/MENU
>
V-CHIP SET
V-CHIP
TV RATING
MOVIE RATING
CHANGE PASSWORD
<
/
/
/
/MENU
: OFF
: OFF
: OFF
: OFF
: TV-Y
: OFF
>
When you select TV- Y7, TV-PG, TV-14 or TV-MA, press
/
or
/
DISPLAY to show the contained rating. Press
to select the desired item you want.
or
to select the
Press
3 “MOVIE
RATING”.
V-CHIP SET
V-CHIP
TV RATING
MOVIE RATING
CHANGE PASSWORD
<
Press
4 rating.
To use after the TV is protected
When a program is received with the
V-Chip protection applied, enter the
password. Protection can be temporarily overridden.
NOTES:
• The V-Chip function is activated only
on programs and tapes that have
the rating signal.
• If you are changing channels using
a VCR or a cable box, while the TV
remains on channel 3 or 4, the VChip operates differently. When you
enter your password to temporarily
release the block on any channel,
you have completely disabled the VChip function for all stations. To
reset the V-Chip turn your TV off
and back on.
• Some cable boxes are built with a
delay feature, in some cases it can
take up to 10 seconds for a program
to appear after the password has
been input.
22
5E90501A P18-23/WO-MP3
22
or
to select desired
OFF :
G
:
PG
:
PG-13 :
MOVIE RATING is not set
All ages
Parental guidance
Parental guidance
<
less than 13 years old
R
: Under 17 years old
Parental guidance suggested
NC-17 : 17 years old and above
X
: Adult only
5 Press
CHIP”.
or
to select “V-
/
/
/
/MENU
>
V-CHIP SET
V-CHIP
TV RATING
MOVIE RATING
CHANGE PASSWORD
/
/
/
/MENU
or
to Display “ON”.
Press
6 Now
your settings were set into
/
/
/
/MENU
<
/
/
Press TV MENU until the MENU
7 screen
is cleared.
22/05/2003, 18:56
/
/MENU
: OFF
: TV-Y
: PG-13
>
V-CHIP SET
V-CHIP
TV RATING
MOVIE RATING
CHANGE PASSWORD
the memory.
: OFF
: TV-Y
: PG-13
>
V-CHIP SET
V-CHIP
TV RATING
MOVIE RATING
CHANGE PASSWORD
<
: OFF
: TV-Y
: OFF
>
: ON
: TV-Y
: PG-13
TO CHANGE PASSWORD
TV to select TV mode,
1 Press
then press TV MENU. The TV
menu screen will appear.
or
until OPTION
2 Press
menu appears.
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
<
/
/
/
/MENU
>
or
to select the “V3 Press
CHIP SET”, then press
or
.
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
<
/
/
/
/MENU
>
the Password using Direct
4 Enter
Channel Selection (0-9), then
press ENTER.
V-CHIP SET
• If you put a wrong number, press
CANCEL.
PASSWORD
<0
or
to select
Press
5 “CHANGE
PASSWORD”, then
press
or
<
then press ENTER.
/
ENTER.
/
/
/MENU
>
: OFF
: OFF
: OFF
>
V-CHIP SET
V-CHIP
TV RATING
MOVIE RATING
CHANGE PASSWORD
NEW
:
PASSWORD
<0
the new password again
7 Enter
for confirmation, then press
9/ENTER/CANCEL/MENU
V-CHIP SET
V-CHIP
TV RATING
MOVIE RATING
CHANGE PASSWORD
.
the new password using
6 Enter
Direct Channel Selection (0-9),
:
: OFF
: OFF
: OFF
9/ENTER/CANCEL/MENU
>
V-CHIP SET
: OFF
V-CHIP
: OFF
TV RATING
MOVIE RATING
: OFF
CHANGE PASSWORD
CONFIRM
:
PASSWORD
<0
9/ENTER/CANCEL/MENU
>
Press TV MENU repeatedly to
8 return
to normal screen.
23
5E90501A P18-23/WO-MP3
23
22/05/2003, 18:56
Picture control adjustment
Picture controls are factory preset but you can adjust them individually as follows:
TV to select TV mode,
1 Press
then press TV MENU. The TV
menu screen will appear.
Press
or
until PICTURE
2 menu
appears.
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
<
/
/
/
/MENU
0
+32
0
0
0
>
Press
or
to select the item
3 you
want to adjust.
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
<
Press
4 setting.
or
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
/
/
>
increase brightness
increase contrast
decrease brightness
decrease contrast
brilliant color
greenish color
pale color
reddish color
makes picture softer
makes picture clearer
the MENU screen is cleared.
CANCEL
Pressing CANCEL while making
picture adjustments will return all
adjustments to the factory preset
levels.
NOTE:
The CONTRAST default setting is set
to maximum at the factory.
24
24
/CANCEL/MENU
to adjust the
your desired setting
5 After
changes press TV MENU until
5E90501A P24-31/WO-MP3
/
0
+32
0
0
0
22/05/2003, 18:57
Stereo and second audio program (SAP)
The TV/DVD is equipped with a feature known as Multi-channel TV Sound or MTS. MTS broadcasts greatly
enhance TV viewing by bringing you programs with high fidelity stereo sound.
MTS also provides an extra channel called the Second Audio Program or SAP which broadcasters can use to
transmit a second language for bilingual transmission or for other purposes.
LISTENING TO STEREO SOUND
When the TV is turned on or a
channel selection is made, make
certain the STEREO appears on
the screen. This means that
"Stereo" broadcasting is
available. You can enjoy stereo
sound from the left and right
speakers.
STEREO
CH 013
• When "Mono" broadcasting is
received, no indication is
displayed.
• If the broadcast signal is not
strong enough or clear stereo
sound is not available, press
AUDIO to change to mono
sound. The noise should be
eliminated. Press it again to
return to the stereo sound.
LISTENING TO SAP (SECOND AUDIO PROGRAM)
When the TV is turned on or a
channel selection is made, make
certain the SAP appears on the
screen. This means that the
"Second Audio Program"
broadcasting is available.
STEREO SAP
CH 013
TO SELECT DESIRED SOUND
Press AUDIO to select the
desired sound.
SEL. STEREO
MONO+SAP BROADCASTING
MONO SOUND
(MAIN)
MONO + SAP SOUND
(MONO)
SAP SOUND
STEREO+SAP BROADCASTING
STEREO SOUND
(MAIN)
SAP SOUND
MONO SOUND
(MAIN)
MONO + SAP SOUND
(MAIN)
25
5E90501A P24-31/WO-MP3
25
22/05/2003, 18:57
Preparation/Status display of disc
The following pages describe the
setup/operation in DVD mode.
Preparation
Before DVD/CD operation, please make preparations as follows.
the AC cord plug into a standard 120V 60Hz polarized
1 Insert
AC outlet.
• If the AC cord plug is plugged in for the first time, wait for
about 5 seconds before pressing POWER.
NOTE: When connecting to other equipment, unplug the unit
from the AC outlet.
POWER on the unit or on the remote control to turn on
2 Press
the unit. The POWER indicator will light.
• Every time you press POWER, the TV/DVD starts from TV
mode.
• When using an amplifier, switch on the amplifier.
DVD on the remote
3 Press
control to select DVD mode.
The DVD startup screen will
appear on the screen.
Status display of disc
Press DISPLAY. The status display of the disc will appear on the
screen.
DVD
Title number
Title elapsed playing time
Chapter number Title total time
Disc operation
T
1/8
C
1/19
0:07:18 2:02:31
1/8 Eng DolbyDigital
1/8 Eng
1/1
Camera angle
Audio language Subtitle language
A kind of audio
To make status display disappear, press DISPLAY again.
Audio CD/Video CD
PBC (PlayBack Control) on Video CD
Track elapsed playing time
NOTE:
If the unit does not operate properly:
Static electricity, etc., may affect the player's operation. Disconnect the AC power
cord once, then connect it again.
Disc operation
Track number
Play list
PBC
T
1/8
0:02:31
0:53:09
Track total time
Playlist
1 2 3 4 5 6 7 8
• When you play a CD disc, the status display will appear
and remain on the screen.
• When you play the Video CD, Play list will not appear on
the screen.
26
5E90501A P24-31/WO-MP3
26
22/05/2003, 18:57
Playback procedure
DVD on the remote
1 Press
control to select DVD
mode.
Press OPEN/CLOSE on
the unit or the remote control.
The disc tray will open.
a disc onto the tray.
2 Place
Position it with the printed
label side up, align it with
the guides, and place it in
its proper position.
OPEN/CLOSE or
3 Press
PLAY.
The disc tray closes automatically.
The TV-screen,
changes
to “ ” and then playback
commences.
NOTES:
• If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or
“Parental Error” will appear on the TV
screen according to the type of loaded
disc. If these appear, check your disc
again (see pages 9 and 37).
• Some discs may take a minute or so to
start playback.
• When you set a single-faced disc label
downwards (ie. the wrong way up) and
press PLAY or OPEN/CLOSE on the
unit, “ ” will appear on the display for
about 6 seconds and then “No Disc” or
“Incorrect Disc” will be displayed.
• Some playback operations of DVDs
may be intentionally fixed by software
producers. Since this unit plays DVDs
according to the disc contents the software producers designed, some playback features may not be available. Also
refer to the instructions supplied with the
DVDs.
• A menu screen will
appear on the TV screen,
if the disc has a menu
feature.
4 Press
/
or
/
to make a selection.
ENTER.
5 •Press
Title is selected and play commences.
STOP to end playback.
6 Press
• The unit memorizes the stopped point, depending on the
disc. “ ” appears on the screen. Press PLAY to resume
playback (from the scene point).
• If you press STOP again or unload the disc (“ ” appears
on the screen.), the unit will clear the stopped point.
OPEN/CLOSE.
7 Press
The disc tray opens.
Remove the disc and press OPEN/CLOSE then press
POWER.
The disc tray closes and unit turns off.
27
5E90501A P24-31/WO-MP3
27
22/05/2003, 18:57
Special playback
Note: There may be a slight delay between when you press the button and
the function activating.
Fast Forward Playback
Press SEARCH + during normal playback.
Each press of the SEARCH + will increase the speed of the
search
(x 2),
(x 4),
(x 8),
(x 15).
(x 2),
(x 4),
(x 8),
(x 20))
(CD:
• To resume normal playback, press PLAY.
Review Playback
Press SEARCH – during normal playback.
Each press of the SEARCH – will increase the speed of the
search
(x 2),
(x 4),
(x 8),
(x 15).
(CD:
(x 2),
(x 4),
(x 8),
(x 20))
• To resume normal playback, press PLAY.
Still Playback
Press PAUSE/STILL during
normal playback to pause playback.
To resume normal playback,
press PLAY.
Frame Advance
Press PAUSE/STILL during still playback.
One frame is advanced each time you press PAUSE/STILL.
To resume normal playback, press PLAY.
Slow-motion Playback
Press SLOW – Reverse or SLOW + Forward during normal
playback or still playback.
Each press of SLOW will change the speed of the slow x1/2,
x1/4, x1/6, x1/8.
• To resume normal playback, press PLAY.
• To resume the still playback, press PAUSE/STILL.
NOTE:
The unit is capable of holding a still video
image or On screen display image on your
television screen indefinitely. If you leave
the still video image or On screen display
image displayed on your TV for an extended period of time, you risk permanent
damage to your television screen. Projection televisions are very susceptible.
Locating a chapter or track
Press SKIP + Forward or SKIP – Reverse during playback to
locate a chapter that you want to watch.
Each time you press the button, a chapter or track is skipped.
28
5E90501A P24-31/WO-MP3
28
22/05/2003, 18:57
Zooming/Locating desired scene
Zooming
This unit will allow you to zoom in on the frame image. You
can then make selections by switching the position of the
frame.
ZOOM during play1 Press
back.
1
The center part of the
image will be zoomed in.
Each press of ZOOM will
1
change the ZOOM
2 (x 3) and
3
(x 2),
(x 4).
Press
/ / /
to view a different part of the frame.
2 You
may move the frame from the center position to UP,
DOWN, LEFT or RIGHT direction.
In the zoom mode press ZOOM repeatedly to return to a
3 1:1
view (
Off).
Locating Desired Scene
Use the title, chapter and time recorded on the disc to
locate the desired point to play back.
Press JUMP during play1 back.
Jump
_ _ / 19
1/8
0:00:00 / 2:02:31
/Enter/0 9/Cancel/Jump
or
2 Press
Track)” or “
to select the “ C (Chapter)”, “ T (Title/
(Time)”.
3 Press Number buttons (0–9) to input the number.
NOTES:
• You can select the Pause, Slow or
Search playback in the zoom mode.
• Some discs may not respond to zoom
feature.
• If you input a wrong number, press CANCEL.
• Refer to the package supplied with the disc to check the
numbers.
4 Press ENTER.
• Playback starts.
• When you change the title, playback starts from
Chapter 1 of the selected title.
• Some discs may not work in the above operation.
29
5E90501A P24-31/WO-MP3
29
22/05/2003, 18:57
Repeat/Random/Program playback and Repeat A-B
Press PLAY MODE during playback or stop mode.
Each time you press PLAY MODE, playback mode changes as follows.
DVD
Audio CD/Video CD
On screen
display
→
On screen
display
Operation
→
Title:
Repeats the current title.
↓
Chapter: Repeats the current chapter.
↓
Off:
Resumes normal playback.
• During stop mode, PLAY MODE key is not effective.
All:
↓
Track:
↓
Random Play:
↓
*Program:
↓
(Status display):
Operation
Repeats entire disc.
Repeats the current track.
Plays the tracks in random order.
Plays the tracks in program order.
Resumes normal playback.
Track”.
• During stop mode, you can not select “
• Random playback and Program playback do not
function on the Video CD.
*Program menu
Use number buttons (0–9) to
enter the track’s number you
want to program, then press
ENTER. The track number and
total time are displayed. Repeat
this step to enter additional
tracks. When you have finished
entering tracks, press PLAY to
start Program playback.
A playlist of your programmed
tracks is displayed.
Program
1 5 8:29
2 8 8:54
3 3 7:31
4 __
Total 3 0:24:54
/Enter/0 9/Cancel/Play/PlayMode
T 5/8
Program Playback
0:02:31 0:08:29
Playlist
5 8 3
NOTES:
• If you enter a wrong number – press CANCEL.
• To cancel program play, press STOP 3 times.
• To clear the programs on the program menu – press CANCEL until all programs
are cleared.
• The program is cancelled when you open the disc tray or turn off the power.
Repeat A-B
Repeat A-B playback allows you to repeat material between two selected points.
Press REPEAT A-B during playback.
The start point is selected.
1
Press REPEAT A-B again.
2 The
end point is selected. Playback starts at the point that you selected. Playback
stops at the end point, returns to Point A automatically, then starts again.
To resume normal playback press REPEAT A-B again. “
screen.
A
A B
Off” appears on the
NOTES:
• Some discs may not work with the repeat operation.
• In Repeat A-B mode, subtitles near point A or B may not appear.
• You may not be able to set Repeat A-B, depending on the scenes of the DVD.
• Repeat A-B does not work with interactive DVDs.
30
5E90501A P24-31/WO-MP3
30
22/05/2003, 18:57
Marking desired scenes
The TV/DVD stores the points that you
want to watch again. You can resume
playback from that scene.
Marking the Scenes
MARKER during
1 Press
playback.
Marker
1
2
3
C
C
C
T
T
T
/Enter/Cancel/Marker
2 Select the blank Marker
using / , then press
ENTER at the desired
scene.
Marker
1
2
3
• Up to 3 scenes can be
selected.
• Repeat this procedure to
set the other 2 scenes.
T
T
T
1
C
C
C
3
0
08
50
3
0
08
50
4
0
12
27
6
0
17
04
3
0
08
50
4
0
12
27
6
0
17
04
/Enter/Cancel/Marker
3 Press MARKER to remove this display.
Returning to the Scenes
MARKER during
1 Press
playback or stop mode.
Marker
1
2
3
T
T
T
1
1
1
C
C
C
/Enter/Cancel/Marker
or to select
2 Press
the Marker 1-3.
Marker
1
2
3
T
T
T
1
1
1
C
C
C
/Enter/Cancel/Marker
3
NOTES:
• The marking is canceled when you open
the disc tray or turn the power off.
• Some subtitles recorded around the
marker may fail to appear. [DVD]
Press ENTER.
Playback starts from the marked scene.
To Cancel the Mark
1 Press MARKER.
2 Press or to select the Marker 1-3.
3 Press CANCEL.
31
5E90501A P24-31/WO-MP3
31
22/05/2003, 18:57
Changing soundtrack language/Subtitles
Changing soundtrack language
You can select the language when you play a multilingual
disc.
AUDIO during play1 Press
back.
2/8 Fra Dolby Digital
The current soundtrack
language will appear.
AUDIO repeatedly
2 Press
until the desired language
is selected.
1/8 Eng Dolby Digital
The on-screen display will
disappear after a few seconds.
In case of Video CD playback
Audio type changes as follows each time you press AUDIO.
LR
R
L
➡
NOTES:
• If the desired language is not heard after pressing the SUB TITLE button several times, the language is not recorded
on the disc.
• Changing soundtrack language is cancelled when you open the disc tray. The
initial default language or available language will be heard if the disc is played
back again.
• Changing subtitle language is cancelled
when you open the disc tray or turn the
power off.
• Some functions may not work on some
DVDs. You may not be able to turn subtitles on or off or change subtitles. While
playing the DVD, the subtitle may
change when:
- you open or close the disc tray
- you change the title.
• In some cases, the subtitle language is
not changed to the selected one immediately.
➡
Subtitles
Turning the Subtitles On and Off
When playing back a disc recorded with subtitles, you
can turn the subtitles on or off.
Press SUB TITLE during playback until “Off” appears.
Off
Changing the subtitle language
You can select the language when playing back a disc
recorded with multi-lingual subtitles.
Press SUB TITLE repeat1 edly
during playback until
your desired language appears.
1/32 Eng
2 The on-screen display will disappear after a few seconds.
32
5E90501A P32-41/WO-MP3
32
22/05/2003, 18:57
Changing angles/Title selection/DVD menu
Changing angles
When playing back a disc recorded with multi-angle facility, you can change the view angle.
ANGLE during play1 Press
back.
1/9
The current angle will appear.
2 Press ANGLE repeatedly until the desired angle is selected.
Title selection
Two or more titles are recorded on some discs. If the title
menu is recorded on the disc, you can select the desired
title.
Press TITLE during playback.
1 Title
menu appears on the screen.
2 Press / or / to select the desired title.
ENTER or PLAY.
3 Press
The playback of the selected title will start.
DVD menu
Some DVDs allow you to select the disc contents using the
menu.
When you play back these DVDs, you can select the subtitle language and sound-track language,etc. using the
DVD menu.
Press DVD MENU during playback.
1 The
DVD menu appears on the screen.
• Press DVD MENU again to resume playback at the scene
when you pressed DVD MENU.
NOTES:
• Depending on the DVD, you may not
be able to change the angles even if
multi-angles are recorded on the DVD.
• Depending on the DVD, you may not
be able to select the title. Depending
on the DVD, a “title menu” may simply
be called a “menu” or “title” in the instructions supplied with the disc.
2 Press / or / to select the desired item.
Press ENTER.
3 The
menu continues to another screen. Repeat steps 2
and 3 to set additional items if any.
33
5E90501A P32-41/WO-MP3
33
22/05/2003, 18:57
Setting language
You can change the default settings
to customise performance to your
preference.
DVD to select DVD
1 Press
mode.
Press SETUP in the stop
mode or No Disc.
Press
or
to select
“Language”, then press
or ENTER.
Press
or
to select
2 “OSD
Language”, then
press
or ENTER.
Main Menu
Language
Picture
Sound
Parental
/Enter/Setup/Return
Language
OSD Language
Menu
Audio
Subtitle
English
English
English
English
/Enter/Setup/Return
Press
or
to select de3 sired
language (e.g. English), then press ENTER.
The menu returns to “Language” menu automatically.
• If you want to return to the
previous menu, press
or RETURN.
OSD Language
English
Francais
Espanol
/Enter/Setup/Return
4 Repeat steps 2-3 for other “Language” setting.
Other Selection: (Menu/Audio/Subtitle)
If you want to select another language, enter the language
code (see the Language code list on page 40).
Off: (subtitle)
Subtitles do not appear.
5 Press SETUP to remove the Menu screen.
NOTES:
• If the selected soundtrack language is
not recorded on the disc, the original
language will be heard.
• If the selected subtitle language is not
recorded on the disc, the first-priority
language is selected.
34
5E90501A P32-41/WO-MP3
34
22/05/2003, 18:57
Setting the aspect ratio of TV screen/Setting on screen display
Setting the aspect ratio of TV screen
You can select the aspect ratio for your TV.
DVD to select DVD
1 Press
mode.
Main Menu
Language
Picture
Sound
Parental
Press SETUP in the stop
mode or No Disc.
Press
or
to select
“Picture”, then press
or
ENTER.
Press
or
to select
2 “TV
Screen”, then press
or ENTER.
Press
or
to select
3 your
desired screen type,
then press ENTER.
/Enter/Setup/Return
Picture
TV Screen
Display
4:3
On
TV Screen
16:9
4:3
4:3
You have the following screen sizes to choose from:
16:9
Wide screen
Select this mode when connecting to a wide-screen TV.
A wide screen picture is displayed full size.
Letterbox
4:3
Select this mode when connecting to a conventional TV.
When playing back a wide screen-DVD disc, it displays the
wide picture with black bands at the top and bottom of
screen.
Panscan
4:3
It displays the wide picture on the whole screen with left
and right edges automatically cut off.
• If you want to return to the previous menu, press
RETURN.
or
4 Press SETUP to remove the Menu screen.
Setting on screen display
On screen display can be switched on or off when you
press the buttons.
DVD to select DVD mode.
1 Press
Press SETUP in the stop mode or No Disc.
Press
or
Press
or
2 “Display”.
NOTE:
If the DVD disc is not formatted in the pan
& scan style, it displays 4:3 style.
to select “Picture”, then press
to select
Press
or ENTER to
3 select
“On” or “Off”.
On:
Off:
or ENTER.
Picture
TV Screen
Display
4:3
On
Picture
TV Screen
Display
4:3
Off
On screen displays appear when you press the
buttons (factory setting).
On screen displays do not appear when you press
any buttons.
• If you want to return to the previous menu, press
RETURN.
4 Press SETUP to remove the Menu screen.
5E90501A P32-41/WO-MP3
35
22/05/2003, 18:57
or
35
Dynamic Range Control
DRC (Dynamic Range Control) enables you to control the dynamic range
so as to achieve a suitable sound for
your equipment.
DVD to select DVD
1 Press
mode.
Main Menu
Language
Picture
Sound
Parental
Press SETUP in the stop
mode or No Disc.
Press
or
to select
“Sound”.
/Enter/Setup/Return
Press
or ENTER to se2 lect
“DRC”.
Sound
DRC
On
/Enter/Setup/Return
Press
or ENTER to se3 lect
“On” or “Off”.
Sound
DRC
Off
/Enter/Setup/Return
• If you want to return to the previous menu, press
RETURN.
4 Press SETUP to remove the Menu screen.
NOTES:
• This function works only during playback of Dolby Digital recorded discs.
• The level of Dynamic Range Reduction
may differ depending on DVD video
disc.
36
5E90501A P32-41/WO-MP3
36
22/05/2003, 18:57
or
Parental control setting
Some discs are specified not suitable
for children. Such discs can be prevented from play back with the unit.
DVD to select DVD
1 Press
mode.
Main Menu
Language
Picture
Sound
Parental
Press SETUP in the stop
mode or No Disc.
or
to select
Press
or
“Parental”, then press
ENTER.
or
to select
2 Press
“Parental Level”, then press
/Enter/Setup/Return
Parental
Password
Parental Level
or ENTER.
or
to select a
3 Press
level from Off or 1–8. Press
or ENTER to set the selected level.
Off
Off
Parental Level
Off
1
2
3
4
5
/Enter/Setup/Return
• Level Off: The parental control setting does not function. (Factory preset)
• Level 1: LOCK ALL:
Playback of all DVDs is prohibited. (Use to
prohibit play of mature theme DVDs not encoded with a rating level.)
• Level 2: DVDs expressly for children can be played
back.
• Level 3 to 7: DVDs for general audiences/children can be
played back. (DVDs with mature content are
prohibited.)
• Level 8: NO LIMIT: All DVDs can be played back.
• Select from the level 1 to level 8. The limitation will be
more severe as the level number is lower.
or
to select
4 Press
“Password”, then press
number buttons (0–
5 Press
9) for the password.
NOTES:
• If each setup (P.34–38) has been
completed, the unit can always be
operated under the same conditions
(especially with DVD discs).
Each setup will be retained in the
memory when you turn the power off.
• Depending on the discs, the unit cannot limit playback.
• Some discs may not be encoded with
specific rating level information though
its disc jacket says “adult.” For those
discs, the age restriction will not work.
Parental
Password
Parental Level
or ENTER.
Don’t forget the password.
• If you input a wrong
number, press CANCEL.
ENTER to store the
6 Press
password.
Note: Now the rating is
locked and the setting cannot be changed unless you
enter the correct password.
Off
1
Password
Password
1234
Parental
Password
Parental Level
On
1
• If you want to return to the previous menu, press
or RETURN.
7 Press SETUP to remove the parental control screen.
37
5E90501A P32-41/WO-MP3
37
22/05/2003, 18:57
To change the parental level
DVD to select DVD mode.
1 Press
Press SETUP in the stop mode or No Disc.
Press
ENTER.
or
to select “Parental”, then press
or
to select
2 Press
“Password”, then press
or ENTER.
number buttons (0–
3 Press
9) to enter the password
you have stored.
or
Parental
Password
Parental Level
On
1
Password
Password
____
• If you input a wrong number, press CANCEL.
ENTER.
4 Press
The password is now Off.
Parental
Press
or
to select
5 “Parental
Level”. Then
Parental
press
or ENTER. The
Parental Level screen is
displayed.
Press
or
to select a
6 level
from Off or 1–8 and
then press
or ENTER.
Password
Parental Level
Password
Parental Level
Off
1
Off
1
Parental Level
3
4
5
6
7
8
/Enter/Setup/Return
Press
or
to select
7 “Password”
and then press
or ENTER.
number buttons (0–
8 Press
9) to enter a 4-digit password.
NOTE:
Do not forget the password. If you
forget the password, in the No Disc
DVD mode, press and hold STOP on
the unit, and simultaneously press and
hold 7 on the remote control for more
than 3 seconds. “PASSWORD CLEAR”
appears on the screen. The password
has been cleared.
The above procedure will clear the
password only.
Parental
Password
Parental Level
Password
Password
38
1234
Note: You can enter a new password.
ENTER.
9 Press
The parental level is now
changed and locked.
Parental
Password
Parental Level
On
8
• If you want to return to the previous menu, press
RETURN.
10 Press SETUP to remove the parental control screen.
38
5E90501A P32-41/WO-MP3
Off
8
22/05/2003, 18:57
or
Temporary disabling of rating level by DVD disc
Depending on the DVD disc, the disc
may try to temporarily cancel the
rating level that you have set.
It is up to you to decide whether to
cancel the rating level or not.
a DVD disc and press
1 Load
PLAY (see page 27).
DVD disc has been designed to temporarily cancel
2 IfthetheRating
level, the screen which appears after inserting
a DVD will change, depending on which disc is played. If
you select “YES” with the ENTER key, “Your disc exceeds
the parental control level.” screen will then appear.
Your disc exceeds the parental control level.
Password
____
Enter/0–9/Cancel/Return
wish to cancel the set rating level temporarily, enter
3 Iftheyou4-digit
password.
Then press ENTER.
Alternatively, if the password has not been set, playback
will commence. If you don’t know (or have forgotten) the
password, select “STOP”.
The setting screen will disappear. Press OPEN/CLOSE to
remove the disc.
To quit entering, press RETURN.
will commence if the entered password was cor4 Playback
rect.
NOTE:
The rating level will remain disabled until the
disc is ejected.
When the disc is ejected, the original rating
level will be set again automatically.
39
5E90501A P32-41/WO-MP3
39
22/05/2003, 18:57
Language code list
Enter the appropriate code number for the initial settings "AUDIO", "SUBTITLE" and/or "MENU LANGUAGE"
(see page 34).
Language Name Code Language Name Code Language Name Code Language Name Code
Abkhazian
1112
Fiji
1620
Lingala
2224
Singhalese
2919
Afar
1111
Finnish
1619
Lithuanian
2230
Slovak
2921
Afrikaans
1116
French
1628
Macedonian
2321
Slovenian
2922
Albanian
2927
Frisian
1635
Malagasy
2317
Somali
2925
Amharic
1123
Galician
1722
Malay
2329
Spanish
1529
Arabic
1128
Georgian
2111
Malayalam
2322
Sundanese
2931
Armenian
1835
German
1415
Maltese
2330
Swahili
2933
Assamese
1129
Greek
1522
Maori
2319
Swedish
2932
Aymara
1135
Greenlandic
2122
Marathi
2328
Tagalog
3022
Azerbaijani
1136
Guarani
1724
Moldavian
2325
Tajik
3017
Bashkir
1211
Gujarati
1731
Mongolian
2324
Tamil
3011
Basque
1531
Hausa
1811
Nauru
2411
Tatar
3030
Bengali; Bangla 1224
Hebrew
1933
Nepali
2415
Telugu
3015
Bhutani
1436
Hindi
1819
Norwegian
2425
Thai
3018
Bihari
1218
Hungarian
1831
Oriya
2528
Tibetan
1225
Breton
1228
Icelandic
1929
Panjabi
2611
Tigrinya
3019
Bulgarian
1217
Indonesian
1924
Pashto, Pushto
2629
Tonga
3025
Burmese
2335
Interlingua
1911
Persian
1611
Turkish
3028
Byelorussian
1215
Irish
1711
Polish
2622
Turkmen
3021
Cambodian
2123
Italian
1930
Portuguese
2630
Twi
3033
Catalan
1311
Japanese
2011
Quechua
2731
Ukrainian
3121
Chinese
3618
Javanese
2033
Rhaeto-Romance 2823
Urdu
3128
Corsican
1325
Kannada
2124
Romanian
2825
Uzbek
3136
Croatian
1828
Kashmiri
2129
Russian
2831
Vietnamese 3219
Czech
1329
Kazakh
2121
Samoan
2923
Volapük
3225
Danish
1411
Kirghiz
2135
Sanskrit
2911
Welsh
1335
Dutch
2422
Korean
2125
Scots Gaelic
1714
Wolof
3325
English
1524
Kurdish
2131
Serbian
2928
Xhosa
3418
Esperanto
1525
Laothian
2225
Serbo-Croatian
2918
Yiddish
2019
Estonian
1530
Latin
2211
Shona
2924
Yoruba
3525
Faroese
1625
Latvian, Lettish 2232
Sindhi
2914
Zulu
3631
40
5E90501A P32-41/WO-MP3
40
22/05/2003, 18:57
Reception disturbances
Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF
antenna. Outdoor antennas are recommended for best results. The most common types of television
interference are shown below. If one of these symptoms appear when the TV/DVD is connected to a Cable
TV system, the disturbance may be caused by the local Cable TV company broadcast.
IGNITION
Black spots or horizontal streaks may appear, the picture may flutter or
drift. Usually caused by interference from automobile ignition systems,
neon lamps or AC powered tools and appliances such as drills or hair
dryers.
GHOSTS
Ghosts are caused by the television signal following two paths. One is
the direct path and the other is reflected by tall buildings, hills or other
large objects. Changing the direction or position of the antenna may
improve the reception.
SNOW
If the TV/DVD is located far from the TV station, in a fringe reception
area where the signal is weak, small dots may appear in the picture.
If the signal is extremely weak, the installation of a larger external
antenna may be necessary.
RADIO FREQUENCY INTERFERENCE (RFI)
Caused by two-way radios, this type of interference produces moving
ripples or diagonal streaks in the picture. Some cases may cause a
loss of contrast in the picture. Changing the direction and position of
the antenna or installing an RFI filter may improve the picture.
PICTURE SIZE VARIATION
A slight picture size variation is normal when you adjust the CONTRAST
or BRIGHTNESS settings.
CARE AND MAINTENANCE
To prevent fire or shock hazard, disconnect the TV/DVD from the power source before cleaning.
The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture.
Use caution when cleaning or wiping the plastic parts.
41
5E90501A P32-41/WO-MP3
41
22/05/2003, 18:57
Connections to other equipment
The exact arrangement you use to interconnect various video and audio components to the TV/DVD is dependent on the model and features of each component. Check the Owner's Manual provided with each component
for the location of video and audio inputs and outputs.
Using an Audio Amplifier
Rear of TV/DVD
Amplifier
Audio (L) Output
Audio (R) Output
To Audio (R) Input
To Audio (L) Input
AUDIO cord (not supplied)
Using an AV Amplifier with built-in digital surround
If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems
including Dolby Digital Surround audio that sounds just like the movie.
Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, MPEG decoder or etc as
shown below.
Rear of TV/DVD
TV/DVD
Front
Speaker
(Right)
Subwoofer
Front
Speaker
(Left)
Coaxial Digital
Audio Output
Center Speaker
Coaxial digital cable (not supplied)
To Coaxial Digital Audio Input
Surround
Speaker (Left)
AV Amplifier with built-in digital surround
decoder as listed above
Surround
Speaker
(Right)
* Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved.
* “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
NOTES:
• When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL, MPEG to MPEG to ON on the AV
Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the speakers to be
damaged.
• When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs.
• Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.
42
5E90501A P42-51/WO-MP3
42
22/05/2003, 18:57
Using the audio/video inputs
If you connect the TV/DVD to VCR, camcorder or TV game, you can select by pressing INPUT.
Press INPUT repeatedly to select the desired mode.
“LINE” or TV channel will display on the screen.
LINE
NOTE:
In the DVD mode this key will not
operate.
1. To connect the TV/DVD to a VCR
Press the INPUT to select the desired mode to use the TV as a monitor.
Operate your VCR as usual.
VCR
Front of TV/DVD
VIDEO IN
AUDIO IN (R)
To Audio/Video
OUT
AUDIO IN (L)
Audio/Video cord (not supplied)
2. To connect the TV to a camcorder
To playback from the camcorder, connect the camcorder to the TV/DVD as shown.
Camcorder
Front of TV/DVD
To Audio/Video OUT
VIDEO IN
AUDIO IN (R)
AUDIO IN (L)
Audio/Video cord (not supplied)
3. To connect the TV to a TV Game
The TV/DVD can also be used as a display device for many video games. However, due to the wide variety of different
types of signal generated by these devices and subsequent hook-up variations required, they have not all been included in
the suggested connection diagrams. You'll need to consult each component's Owner's Manual for additional information.
Front of TV/DVD
To Audio/Video OUT
VIDEO IN
AUDIO IN (R)
AUDIO IN (L)
Audio/Video cord (not supplied)
43
5E90501A P42-51/WO-MP3
43
22/05/2003, 18:57
Problems and troubleshooting
Use the following check list for troubleshooting when you have problems with your unit. Consult your local
dealer or service outlet if problems persist.
Be sure all connections are properly made when using with other units.
SYMPTOMS
POSSIBLE SOLUTIONS
PAGE
POWER
• Make sure the power cord is plugged in.
• Try another AC outlet.
• Power is off, check fuse or circuit breaker.
• Unplug unit, then plug it back in.
• Connect the DC car cord to the cigarette lighter socket.
• The DC car cord fuse is drown, replace fuse.
TV/DVD does not operate.
12,13
TV BROADCAST RECEPTION
16
16
41
Poor sound or No sound
• Station or CATV experiencing problems, tune to another station.
• Check Volume adjustments.
• Check for sources of possible interference.
Poor picture or No picture
• Station or CATV experiencing problems, tune to another station. 16
13,14
• Check antenna or CATV connections, reorient antenna.
41
• Check for sources of possible interference.
24
• Check picture control adjustments.
Poor reception on some channels
• Station or CATV experiencing problems, tune to another station. 16
• Station signal is weak, reorient antenna to receive weaker station. 13,14
41
• Check for sources of possible interference.
• Station or CATV experiencing problems, tune to another station. 16
• Make sure channels are set into memory.
20
• Check picture control adjustments.
24
• Check antenna or CATV connections, reorient antenna.
13,14
• Check for sources of possible interference.
41
• Station or CATV experiencing problems, tune to another station. 16
20
• Make sure channels are set into memory.
–
• CATV company is scrambling signal.
13
• Check antenna orientation.
14
• Check all CATV connections.
19
• Set TV/CATV menu option to the CATV mode.
16
• Station or CATV system problems, try another station.
Poor color or no color
Picture wobbles or drifts
No CATV reception
Horizontal or diagonal bars on
screen
• Check antenna connections, reorient antenna.
• Check for sources of possible interference.
No reception above channel 13
• Make sure TV/CATV menu option is in the appropriate mode.
• If using antenna, check UHF antenna connections.
19
13
TV shuts off
• No broadcast on station tuned.
• Sleep Timer is set.
• Power interrupted.
20
17
–
Closed - Caption is not activated.
• TV station experiencing problems or program tuned is not closed
16
captioned. Try another channel.
• Check CATV connection or VHF/UHF antenna, reposition or ro- 13,14
tate antenna.
• Press CC button to turn on the closed caption decoder.
18
Display is not shown in your
language.
• Select proper language in the menu options.
44
5E90501A P42-51/WO-MP3
44
22/05/2003, 18:57
13,14
41
15
SYMPTOMS
POSSIBLE SOLUTIONS
PAGE
DVD
• No disc is inserted.
• The disc may be dirty. Clean up the disc.
• The unit cannot play CD-ROMs, etc.
27
9
–
No picture
• TV/DVD selector is not set correctly.
26
No sound
• Check the input selector of the amplifier is set properly.
• The unit is in the Special playback mode.
• Select the correct Audio Output position on AV amplifier.
–
28
42
Picture is distorted during CUE or
REVIEW.
• The picture will be distorted occasionally.
–
Stopping playback, search, slowmotion play, repeat play, or
program play, etc. cannot be
performed.
• Some discs may not do some of the functions.
–
No 4:3 (16:9) picture
• The setup does not match your TV.
35
No on-screen display
• Select Display On.
35
No surround sound
• The setup does not match your stereo system.
42
The unit or remote operation key
is not functioning.
• Turn off the unit and unplug the AC power cord for several minutes, then replug it.
–
Playback does not start when the
title is selected.
• Check the RATING LEVEL setup.
Audio soundtrack and/or subtitle
language is not changed when
you play back a DVD.
• Multilingual language is not recorded on the DVD disc.
Playback doesn’t start.
37~39
34
No subtitle
• Some discs have no subtitles.
• Subtitles are cleared. Press SUB TITLE.
32
Angle cannot be changed.
• Multi-angles are not recorded on the DVD disc.
33
“
• The function is prohibited with the unit or the disc.
–
” appears on the screen.
–
REMOTE CONTROL
• Aim at the remote control at the remote sensor.
• Operate within Approx. 5 Meters or reduce the light in the room.
• Clear the path of the beam.
• The batteries are weak. Replace the batteries.
• Check the batteries are inserted correctly.
The remote control does not
function.
12
If you cannot resolve the problem, please call the Customer Satisfaction Center for product assistance
at 1-800-211-PANA(7262).
To locate an authorized servicenter call toll free 1-800-211-PANA(7262) or send e-mail to :
[email protected].
45
5E90501A P42-51/WO-MP3
45
22/05/2003, 18:57
Specifications
GENERAL
Power supply:
Power consumption:
Weight:
Dimensions:
Operating temperature:
Operating humidity:
TELEVISION
Picture tube:
Tuner type:
Receiving channels:
Antenna input:
Speaker:
Audio output power:
DVD/CD player
Signal system:
Applicable disc:
Audio characteristics
frequency response:
S/N Ratio:
Harmonic distortion:
Wow and flutter:
Input/Output:
Digital audio out:
Pickup:
ACCESSORIES:
AC 120V 60Hz
DC 12V
Operation: 55W (AC120V, DC12V)
Stand by: 4W (AC120V), 3W (DC12V)
8 kg (17.6 lbs)
Width : 278 mm (10-15/16 inches)
Height : 311.5 mm (12-1/4 inches)
Depth : 312.5 mm (12-5/16 inches)
5° - 40°C
Less than 80% RH
9” (229 mm diagonal)
Quartz PLL Frequency Synthesized
VHF
2-13
UHF
14-69
CATV 14-36 (A)-(W)
37-59 (AA)-(WW)
60-85 (AAA)-(ZZZ)
86-94 (86)-(94)
95-99 (A-5)-(A-1)
100-125 (100)-(125)
01 (5A)
VHF/UHF In 75 ohm coaxial
3" (76 mm), 8 ohm x 2
1.2W + 1.2W
NTSC
1. DVD (12cm, 8cm)
2. CD (12cm, 8cm)
DVD: 4Hz - 22KHz
CD: 4Hz - 20KHz
90dB
0.06%
Below Measurable Level
Inputs : Video : (RCA) 1 Vp-p/75ohm
Audio : (RCA) –8 dBm/50Kohm
Outputs : Video : (RCA) 1 Vp-p/75ohm
Audio : (RCA) –12 dBm/1Kohm
0.5Vp-p 75ohms terminated
CD : Wavelength: 775 - 815 nm
Maximum output power: 0.5 mW
DVD : Wavelength: 650 - 666 nm
Maximum output power: 2.0 mW
Remote control
Batteries 2 “AAA”
Telescopic Antenna
12V DC Car Cord
46
5E90501A P42-51/WO-MP3
46
22/05/2003, 18:57
MEMO
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
................................................................................................................
47
5E90501A P42-51/WO-MP3
47
22/05/2003, 18:57
Index of Controls
Remote Control Button
DVD
See page 26
TV
See page 15
POWER
See pages 15, 16, 26
OPEN /CLOSE
See pages 27, 39
0-9
See pages 16, 20, 21,
23, 29, 30, 37~39
INPUT
See page 43
DVD MENU
See page 33
VOL +/–
See page 16
ENTER
See pages 15, 21, 23,
27, 29~31, 33~39
DISPLAY
See pages 17, 22, 26
SETUP/TV MENU
See pages 15, 19~24,
34~38
CH /
See page 17
RETURN
See pages 34~39
See pages 15, 19~24,
27, 29, 31, 33~38
PLAY
See pages 27, 28,
30, 33, 39
CANCEL
See pages 21, 23, 24,
29~31, 37, 38
STOP
See pages 27, 30
PAUSE/STILL
See page 28
SKIP +/–
See page 28
SEARCH +/–
See page 28
AUDIO
See pages 25, 32
SLOW +/–
See page 28
ANGLE
See page 33
SUB TITLE
See page 32
R-TUNE/ZOOM
See pages 17, 29
TITLE
See page 33
PLAY MODE
See page 30
MARKER
See page 31
SLEEP
See page 17
MUTE
See page 17
REPEAT A-B
See page 30
CC/JUMP
See pages 18, 29
48
5E90501A P42-51/WO-MP3
48
22/05/2003, 18:57
Front
CH
/
See page 17
Disc tray
See page 27
Power Indicator
Light when the power is
turned on.
Headphones Jack
POWER button
See pages 15, 16, 26
AUDIO (L/R) /VIDEO
IN Jacks
See page 43
Remote Sensor
See page 12
VOL +/–
See page
16
OPEN/
CLOSE
See pages
27, 39
STOP
PLAY
See page See pages
27, 30 27, 28, 30,
34, 40
SKIP +/–
See page
28
Rear
DC Input Jack
Connect the 12V DC car cord
(supplied) here for DC
operation.
COAXIAL DIGITAL
AUDIO OUT Jack
See page 42
RF IN Jack
Connect the 75 ohm coaxial
cable from the antenna or
Cable TV service to this jack.
AUDIO (L/R) / Video
OUT Jacks
Used to output audio and
video signals to a TV,
amplifier or VCR.
AC Power Cord
Connect to a 120V, 60Hz
outlet.
49
5E90501A P42-51/WO-MP3
49
22/05/2003, 18:57
Spanish Quick Use Guide (Guía para rápida consulta)
Conexiones de la antena
Antena combinada de VHF/UHF (Cable único de 75 ohmios o cable con
doble conductor de 300 ohmios)
Conecte el cable de 75 ohmios de la antena
combinada de VHF/UHF en el jack de la antena.
Si su antena combinada de VHF/UHF posee un cable
de dos conductores de 300 ohmios, es posible que
sea necesario utilizar un transformador de adaptación
de 300-75 ohmios.
Jack de antena
Jack de antena
UHF/
VHF
Cable
coaxial de
75 ohmios
UHF/
VHF
Transformador de adaptacion de 300-75 ohmios
Antena combinada de VHF/UHF (Cables de 300 ohmios independientes
de dos conductores de VHF y de UHF)
Conecte el cable de dos conductores de 300 ohmios
de UHF en el combinador (no suministrado). Conecte
el cable de dos conductores de 300 ohmios de VHF
en el transformador de adaptación de 300-75 ohmios.
Conecte el transformador al combinador, y luego
conecte el combinador al jack de la antena.
Jack de antena
Transformador de adaptacion
de 300-75 ohmios
UHF/
VHF
Conexiones de TV cable
Para abonados al servicio basico de
TV cable
Para el servicio básico de cable y cuando no es
necesario un convertidor/caja decodificadora, conecte
el cable coaxial de 75 ohmios de CATV al jack de la
antena en la parte trasera del TV/DVD.
Jack de antena
Cable coaxial de
75 ohmios
ANT
Para abonados al servicio codificado
de TV cable
Si usted es abonado a un servicio de TV cable que
requiere el uso de un convertidor/caja decodificadora,
conecte el cable coaxial entrante de 75 ohmios al
convertidor/caja decodificadora. Utilizando otro cable
coaxial de 75 ohmios conecte el jack de salida del
convertidor/caja decodificadora al jack de la antena
del TV/DVD. Vea las conexiones mostradas abajo.
Sintonice el TV/DVD al canal de salida del
convertidor/caja decodificadora (generalmente canal
3 ó 4), y utilice el convertidor/caja decodificadora para
seleccionar los canales.
Cable entrante de 75
ohmios de CATV
Convertidor/Decodificador
Cable de 75 ohmios el TV/DVD
Jack de antena
Combinador
UHF 300 ohmios
VHF 300 ohmios
Antenas independientes de VHF/UHF
(cable de VHF de 75 ohmios y cables de
dos conductores UHF de 300 ohmios)
Conecte el cable de 75 ohmios de VHF y el cable de
dos conductores de 300 ohmios de UHF al combinador
(no suministrado). Conecte el combinador en el jack de
la antena.
Jack de antena
UHF/
VHF
VHF 75 ohmios
Combinador
UHF 300 ohmios
50
5E90501A P42-51/WO-MP3
50
22/05/2003, 18:58
Seleccion de idioma en pantalla
encenber el TV/DVD, presione POWER se
1 Para
encenderá el indicador Power. Presione TV para
seleccionar el modo TV.
• Cada vez que presiona POWER, el TV/DVD se
enciende desde el modo TV.
TV MENU. Aparecerá la pantalla del menú de
2 Presione
la TV.
Presione
ó
hasta que
3 aparezca
el menú OPTION.
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
<
/
/
/
/MENU
>
Presione
ó
para
4 seleccionar
el modo
LANGUAGE, luego presione
ó
.
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
<
/
/
/
/MENU
<
Presione
ó
para
5 seleccionar
el idioma deseada:
inglés (ENGLISH), español
(ESPAÑOL) o francés
(FRANCAIS), luego presione
ENTER.
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
<
/
/ ENTER / MENU
<
Presione TV MENU hasta que se borre la pantalla MENU.
Operacion del TV
encender el TV/DVD, presione POWER. Presione TV
1 Para
para seleccionar el mode TV.
el nivel de volumen
2 Ajuste
presionando VOL + ó –. El nivel
de volumen será indicado en la
pantalla por medio de barras
verdes y una indicación de
VOLUME
32
número. A medida que el volumen
aumenta, se incrementan el
número de barras y la indicación de número. Si se reduce el
volumen, el número de barras verdes y la indicación de número
decrecen.
el modo TV/CATV
3 Ajuste
a la posición apropiada.
TV
- Canales de VHF/UHF
CATV - Canales de TV CABLE
el botón de selección
4 Presione
directa de canal.
CH 012
51
5E90501A P42-51/WO-MP3
51
22/05/2003, 18:58
Spanish Quick Use Guide (Guía para rápida consulta)
Para menorizer canales
SELECCION DE TV/CATV
TV para seleccionar el modo TV. Presione TV
1 Presione
MENU. Aparece la pantalla del menú de la TV.
Presione
ó
hasta que
2 aparezca
el menú SET UP.
TV/CATV
ADD/DELETE
AUTO CH MEMORY
<
/
/
/
CATV
ADD
>
/MENU
ó
para
3 Presione
seleccionar el modo TV/CATV.
TV/CATV
ADD/DELETE
AUTO CH MEMORY
<
4
Presione
ó
para
seleccionar el modo TV ó CATV.
La flecha indica el modo
seleccionado.
TV
- Canales de VHF/UHF
CATV - Canales de TV CABLE
/
/
/
CATV
ADD
/MENU
>
TV/CATV
ADD/DELETE
AUTO CH MEMORY
<
/
/
/
TV
ADD
>
/MENU
5 Presione TV MENU hasta que se borre la pantalla MENU.
SINTONIZACION DE MEMORIA AUTOMATICA DE
CANAL
TV para seleccionar el modo TV. Presione TV
1 Presione
MENU. Aparece la pantalla del menú de la TV.
Presione
ó
hasta que
2 aparezca
el menú SET UP.
TV/CATV
ADD/DELETE
AUTO CH MEMORY
<
3
Presione
ó
para
seleccionar el modo AUTO CH
MEMORY, a continuación
presione
ó
. El TV
comenzará a memorizar todos
los canales disponibles en su
área.
/
/
/
CATV
ADD
>
/MENU
TV/CATV
ADD/DELETE
AUTO CH MEMORY
<
/
/
/
/MENU
CATV
ADD
>
TV MENU hasta que se borre la pantalla
4 Presione
MENU.
52
5E90501A P52-Back/WO-MP3
52
22/05/2003, 18:58
Procedimiento de reproducción
1
2
Presione POWER en la unidad o en el mando a
distancia para encender la unidad. Se encenderá el
indicador POWER.
• Cada vez que presiona POWER, el TV/DVD se
enciende desde el modo TV.
• Cuando use un amplificador, enciéndalo.
Presione DVD para
seleccionar el modo DVD.
Aparecerá la pantalla de inicio
del DVD.
3
Presione OPEN/CLOSE
en el aparato. Se abrirá
la bandeja del disco.
4
Coloque un disco en la bandeja.
Sujete el disco, colóquelo con
el lado de etiqueta impresa
hacia arriba, alinee en las guía
y coloque el disco en su posición
correcta.
5
Presione PLAY u OPEN/
CLOSE en el aparato.
La bandeja del disco se cierra
automáticamente.
En la pantalla del TV la
indicación “ ” cambia a “ ” y
empieza la reproducción.
• Aparece la pantalla del menú
en la pantalla de TV, si el disco
tiene una función de menú.
Nota:
• Si se coloca un disco no compatible, aparecerá
“Incorrect Disc”, “Region Code Error” o “Parentol
Error” en la pantalla de TV dependiendo del tipo
de disco cargado. En este caso, revisar el disco
nuevamente.
• Algunos discos pueden demorar un minuto antes
de empezar la reproducción.
• Cuando coloque un disco de una sola cara con
esa etiquetq abajo (i.e. del lado incorrecto) y
presione PLAY o OPEN/CLOSE en el aparato,
” en la pantalla durante 6 segundos
aparecerá “
y después aparecerá continuamente la palabra “No
Disc”.
• Algunas funciones de reproducción de DVD pueden
haber sido elegidas por el productor de la película.
Como este aparato reproduce los DVD de acuerdo
con las posibilidades introducidas por el productor,
algunas funciones de reproducción pueden no
existir. Consulte además las instrucciones que
vienen con el DVD.
6
7
8
9
Presione
/
ó
/
para seleccionar el título.
Presione ENTER.
• Se selecciona el título y empieza la reproducción.
Presione STOP para terminar la reproducción.
• El aparato graba el punto de parada, según el disco.
Aparece“ ” en la pantalla. (Presione PLAY para
continuar reproduciendo (desde el mismo punto).
• Si presiona nuevamente STOP o se retira el disco
” en la pantalla), el aparato borrará el
(Aparece “
punto de parada.
Presione OPEN/CLOSE en el aparato.
Se abre la bandeja del disco.
Saque el disco y presione OPEN/CLOSE en el aparato
y presione POWER.
La bandeja del disco se cierra automáticamente y se
desconecta el aparato.
53
5E90501A P52-Back/WO-MP3
53
22/05/2003, 18:58
Limited Warranty
PANASONIC CONSUMER ELECTRONICS
COMPANY, DIVISION OF MATSUSHITA ELECTRIC
CORPORATION OF AMERICA
One Panasonic Way Secaucus, New Jersey 07094
PANASONIC SALES COMPANY, DIVISION OF
MATSUSHITA ELECTRIC OF PUERTO RICO, INC.,
AVE. 65 de Infantería, Km. 9.5 San Gabriel Industrial
Park, Carolina, Puerto Rico 00985
Panasonic/Quasar Video Products
Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship, Panasonic
Consumer Electronics Company or Panasonic Sales Company (collectively referred to as “the warrantor”)
will, for the length of the period indicated on the chart below, which starts with the date of original
purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, or
(b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warrantor.
Product
Camcorder
DVD/VCR Deck,
A/V Mixer
TV/VCR, TV/DVD,
TV/DVD/VCR
Combination
TV/HDR
Combination
Rechargeable
Batteries
(in exchange for
defective item)
Tape
(in exchange for
defective item)
Memory Cards
(in exchange for
defective item)
Parts
One (1) Year (except
CCD Image Sensor)
CCD Image Sensor - 6
(Six) Months
One (1) Year
Labor
Service
Ninety (90) Days Carry-In or Mail-In
One (1) Year (except
CRT)
CRT - Two (2) Years
Ninety (90) Days Carry-In: 21” CRT
1-800-211-PANA(7262)
and Smaller
Ninety (90) Days In-Home or Carry-In:
22” CRT and Larger
Ninety (90) Days In-Home or Carry-In 1-888-843-9788
One (1) Year (except
CRT)
CRT - Two (2) Years
Ten (10) Days
Contact Number
1-800-211-PANA(7262)
Ninety (90) Days
Ninety (90) Days Carry-In or Mail-In
1-800-211-PANA(7262)
Ninety (90) Days
Not Applicable
Carry-In or Mail-In
1-800-211-PANA(7262)
Five (5) Days
Not Applicable
Carry-In or Mail-In
1-800-211-PANA(7262)
Ninety (90) Days
Not Applicable
Carry-In or Mail-In
1-800-211-PANA(7262)
During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period,
there will be no charge for parts. You must carry-in or mail-in your product or arrange for in-home
service, as applicable, during the warranty period.
If non-rechargeable batteries are included, they are not warranted. This warranty only ap plies to
products purchased and serviced in the United States or Puer to Rico. This warranty is extended only to
the original purchaser of a new product which was not sold “as is.” A purchase receipt or other proof of
the original purchase date is required for warranty service.
Carry-In, Mail-in or In-Home Service
For Carry-In, Mail-In or In-Home Service (as applicable) in the United States call toll free contact
number listed above or visit Panasonic Web Site: http://www.panasonic.com
For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or fax (787)-768-2910.
In-Home service, if applicable, requires clear, complete and easy access to the product by the
authorized servicer and does not include removal or re-installation of an installed product. It is possible
that certain in-home repairs will not be completed in-home, but will require that the product, or parts of
the product, be removed for shop diagnosis and/or repair and then re turned.
54
5E90501A P52-Back/WO-MP3
54
22/05/2003, 18:58
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT
COVER normal wear and tear or cosmetic damage, nor does it cover markings or retained images on
the picture tube resulting from viewing fixed images (including, among other things, letterbox pictures
on standard 4:3 screen TV’s, or non-expanded standard 4:3 pic tures on wide screen TV’s, or onscreen
data in a stationary and fixed location). The warranty ALSO DOES NOT COVER damages which
occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures
which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power
line surge, lightning damage, modifi cation, or commercial use (such as in a hotel, offi ce, restaurant, or
other business), rental use of the product, service by anyone other than a Factory Servicenter or other
Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY
COVERAGE.” THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH
OF THIS WARRANTY. (As examples, this excludes damages for lost time, cost of having someone
remove or re-install an installed unit if applicable, or travel to and from the servicer, loss of media or
images, data or other memory or recorded content. The items listed are not exclusive, but are for
illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or
limitations on how long an implied warranty lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from state
to state. If a problem with this product develops during or after the warranty period, you may contact
your dealer or Servicenter. If the problem is not handled to your satisfaction, then write to the warrantor’s
Consumer Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE (INCLUDING COST OF AN IN-HOME SERVICE CALL, WHERE
APPLICABLE) WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR
RESPONSIBILITY.
Customer Services Directory
For Product Information, Operating Assistance, Literature Request, Dealer
Locations, and all Customer Service inquiries please contact:
1-800-211-PANA (7262), Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm,
EST. or send e-mail : [email protected]
For hearing or speech impaired TTY users, TTY : 1-877-833-8855
Web Site: http://www.panasonic.com
You can purchase parts, accessories or locate your
nearest servicenter by visiting our Web Site.
Accessory Purchases:
1-800-332-5368 (Customer Orders Only)
For hearing or speech impaired TTY users, TTY : 1-866-605-1277
Panasonic Services Company 20421 84th Avenue South, Kent, WA 98032
(Monday-Friday 6 am-5 pm; Saturday 6 am-10:30 am, PST)
(Visa, MasterCard, Discover Card, American Express, Check)
Service in Puerto Rico
Matsushita Electric of Puerto Rico, Inc. Panasonic Sales Company/ Factory
Servicenter:
Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
Phone (787)750-4300 Fax (787)768-2910
As of August 2002
5E90501A P52-Back/WO-MP3
55
55
22/05/2003, 18:58
Index
A
O
Accessories .............................................................. 7
Add/Delete Channels ............................................. 20
Angle ...................................................................... 33
Antenna Connections ............................................. 13
Aspect Ratio of TV Screen ..................................... 35
Audio CD ........................................................ 9,26,30
Automatic Memory Tuning ...................................... 20
OPEN/CLOSE ........................................................ 27
B
Battery .................................................................... 12
C
Cable TV Connections ........................................... 14
Change Password .................................................. 23
Channel C/D .......................................................... 17
Chapter .................................................................... 9
Closed Caption ....................................................... 18
Condensation ........................................................... 5
Connections to Other Equipment ...................... 42,43
Customer Service Directory ................................... 55
D
Digital Audio Out .................................................... 42
Disc .......................................................................... 9
Display .............................................................. 17,26
DVD Menu .............................................................. 33
Dynamic Range Control (DRC) .............................. 36
F
Fast Forward Playback ........................................... 28
Features ................................................................... 8
Frame Advance ...................................................... 28
I
Important Safeguards .............................................. 3
Index of Controls ............................................... 48,49
Install the TV/DVD in Your Car .................................. 6
J
Jump ...................................................................... 29
L
Language .......................................................... 15,34
Language Code ................................................ 34,40
Letterbox ................................................................ 35
Limited Warranty .................................................... 54
Locating a Chapter or Track ................................... 29
M
Marker .................................................................... 31
Memorize Channels ............................................... 19
Mute ....................................................................... 17
P
Panscan ................................................................. 35
Parental Control ................................................ 37-39
Parts and Functions ............................................... 10
Password ................................................. 21,23,37-39
Picture Control Adjustment .................................... 24
Playback ................................................................. 27
Power Sources ....................................................... 12
Problems and Troubleshooting ............................... 44
Program Playback .................................................. 30
R
Random Playback .................................................. 30
Reception Disturbances ......................................... 41
Region Number ........................................................ 7
Remote Control ...................................................... 11
Repeat .................................................................... 30
Repeat A-B ............................................................. 30
Replacing the Fuse ................................................ 13
Review Playback .................................................... 28
R-Tune .................................................................... 17
S
Safety Precautions ................................................... 6
Setting the Language ........................................ 15,34
Sleep ...................................................................... 17
Slow-motion Playback ............................................ 28
Soundtrack ............................................................. 32
Spanish Quick Use Guide ...................................... 50
Specifications ......................................................... 46
Stereo and Second Audio Program (SAP) ............. 25
Still Playback .......................................................... 28
Stop ........................................................................ 27
Subtitle ................................................................... 33
T
Title .......................................................................... 9
Title Selection ......................................................... 33
Track ......................................................................... 9
TV Operation .......................................................... 16
TV/CATV Selection ................................................. 19
V
Video CD ........................................................ 9,26,30
Volume ................................................................... 16
V-Chip ............................................................... 21-23
W
Wide Screen ........................................................... 35
Z
Zoom ...................................................................... 29
Panasonic Consumer Electronics Company,
Division of Matsushita Electric Corporation of America
One Panasonic Way Secaucus,
New Jersey 07094
Panasonic Sales Company (“PSC”),
Division of Matsushita Electric of Puerto Rico, Inc.
Ave. 65 de Infanteria. Km. 9.5
San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Printed in Thailand
J5E90501A U
03/05
5E90501A P52-Back/WO-MP3
P
56
23/05/2003, 10:33
">