Panasonic | DP1520 | Operating instructions | Panasonic DP1520 Operating Instructions

Getting To Know
Your Machine
(For Copy & Network Scan Functions)
DP-1520P/1820P/1820E
Before operating this equipment, please read these instructions completely
and keep these operating instructions for future reference.
English
Appendix
Problem Solving
Network Scanner
(Option)
Accessories
Function
Model No.
Before Starting
Operating Instructions
Making Copies
Digital Imaging Systems
Getting To Know Your Machine
Useful Office Functions/Operating Instructions
Copy
Fax/Email
• Copy up to A3 size originals.
• Capable of copying text/photos/
halftone originals.
• Plain Paper High-speed Super G3
compatible Fax with JBIG compression
when optional Fax Communication
Board (DA-FG180) is installed.
(For DP-1820P/1820E only)
• Quick-Scan
• Quick Memory Transmission
• Email Function capability when optional
Internet Fax/E-Mail Module (DANF180) is installed.
Scan/File
• Monochrome scanner capability
when optional Network Scanner
Module (DA-NS180) is installed. (For
DP-1820P/1820E only)
• Scanning resolution up to: 600 dpi
Print
• Printer controller standard, printer
resolution 300 or 600 dpi.
Application Software
•
•
•
•
Document Manager, Document Viewer
Network Scanner when optional Network Scanner Module is installed.
Utilities (Network Status Monitor, Address Book Editor, Network Configuration Editor)
Panafax Desktop when optional Fax Communication Board is installed.
■ The following operating instruction manuals are provided for this machine, please use the correct manual when an operator intervention
is necessary.
<Copy & Network Scan>
Use the information provided on the enclosed CD whenever a Copy & Network Scan function requires
intervention.
For example: How to make copies, add paper, replace the toner bottle, etc.
<Print &
Other Advanced
Functions>
Use the information provided on the enclosed CD for an explanation of how to use as a Network Printer,
Network Scanner, Edit Directory Dialling Feature, Device Settings, Network Status Monitor, and/or Document
Management System.
Multi-Tasking Job Table
Current
Job
Copy
2nd Job
Network Scanning
Internet Fax
GDI/PCL/PS
Printing
Storing
Receiving
Printing
Data Received Data
Document Transmission
Facsimile
(Sending)
Storing
Document
Memory
Transmission
Facsimile
(Receiving)
Memory
Receiving
Copy
Copy
Network Scanning, Internet Fax
Storing Document
GDI/PCL/PS Printing
Receiving Data
Printing Receive Document
Facsimile (Sending)
Storing Document
Memory Transmission
Facsimile (Receiving)
Memory Receiving
Printing Received
Memory Data
*
: Accepts and executes the 2nd Job.
: Accepts and executes the 2nd Job (Copy) only if the Current Job is interrupted.
: Accepts the 2nd Job and executes the 2nd Job after the Current Job is completed.
: Not applicable.
NOTE
2
∗: HDD (DA-HD18) and additional 16MB (minimum) Image memory are required.
Printing Received
Memory Data
Getting To Know
Your Machine
Operating Instructions Outline
Getting To Know
Your Machine
● Precautions
(See pages 7-13)
● Quick Operation Chart, Adding Paper (See pages 14, 15)
● Problem Solving, Memory Full,
Replacing Toner Bottle/Toner Waste Container,
Removing Misfed Paper,
Error Codes (U Code/J Code)
(See pages 15-21)
Before Starting
● Control Panel Key/Indicator Names
Making Copies
● Operating Instructions for making copies
(See pages 24-43)
Function
Accessories
Network Scanner
(Option)
Problem Solving
Appendix
(See pages 22, 23)
● Changing the Initial Machine Modes
● General, Copier, Printer and Scanner Settings
(See pages 44-57)
● Combined Function Table
(See page 58)
● Components
● ADF, i-ADF
●
●
●
●
(See page 59)
(See page 25)
Document Scanning
(See pages 60, 61)
Address Book
(See pages 62, 63)
Function
(See pages 64, 65)
Direct Connection (with Crossover Cable)
(See pages 66, 67)
● Troubleshooting
(See pages 68, 69)
● Replacing the Battery/Set the Date and Time
(See pages 70, 71)
● Specifications, Options and Supplies
(See pages 72-74)
3
Getting To Know Your Machine
Symbols/Icons
A
B
C
The following Symbols/Icons are used throughout this operating instructions manual.
Place original(s) on the ADF/i-ADF
Getting to know your machine
Before starting
Place original on the Platen
(Book)
When making copies
Place original on the Platen
(Sheet)
Press any Hard Key on the
Control Panel
When setting the machine
modes
Press Hard Key
Accessories
Input numbers
● Number of Copies, etc. Input text with a Keyboard
(Option)
When scanning document(s)
Go to next step
Problem solving
Go to next step (below)
5
Appendix
4
Getting To Know
Your Machine
Getting To Know Your Machine
Table of Contents
Getting to Know Your Machine
Useful Office Functions/Operating Instructions .......................................................................... 2
Multi-Tasking Job Table .................................................................................................................. 2
Operating Instructions Outline ...................................................................................................... 3
Symbols/Icons ................................................................................................................................. 4
Precautions ...................................................................................................................................... 7
Operation Chart ............................................................................................................................. 14
■ Quick Operation Chart ................................................................................... 14
● Adding Paper .............................................................................................. 14
■ Problem Solving ............................................................................................. 15
● Toner Level Check Operation ..................................................................... 15
● Memory Full ................................................................................................ 15
● Replacing Toner Bottle/Toner Waste Container .......................................... 16
● Removing Misfed Paper ............................................................................. 16
● User Error Codes (U Code) ........................................................................ 20
● Jam Error Codes (J Code) ......................................................................... 21
Before Starting
Control Panel ................................................................................................................................. 22
Making Copies
■
■
■
■
Creative Features ■
■
■
■
■
■
■
■
■
■
Other Features ■
■
■
■
■
■
Basic Copy
Copying the Same Size Originals (1:1) .......................................................... 24
Position of the Original(s) ............................................................................... 24
Copying with Preset or Variable Zoom Ratios ................................................ 24
Using the ADF/i-ADF (Option) ........................................................................ 25
1
2 Copy, 2
2 Copy, 2
1 Copy (DP-1820E with optional i-ADF only) ... 26
2
2 Copy (DP-1820E only), 2
1 Copy .................................................. 26
Book
2 Copy (DP-1820E only) .................................................................. 28
N in 1 .............................................................................................................. 30
2 Page Copy .................................................................................................. 32
Double Exposure ............................................................................................ 32
Erase (Margin/Edge) ...................................................................................... 34
Erase (Book) .................................................................................................. 34
Effects (Centering/Image Repeat) .................................................................. 36
Sort ................................................................................................................. 36
Skyshot Mode (Digital/Manual Skyshot Mode) .............................................. 38
Job Build and SADF Mode ............................................................................. 40
Concurrent Copying ....................................................................................... 40
Interrupt Mode ................................................................................................ 42
Energy Saver (Power Saver Mode, Sleep/Shutdown Mode) ......................... 42
Job Memory ................................................................................................... 42
5
Getting To Know Your Machine
Table of Contents
Function
■ Using Function Modes to Change the Initial Machine Modes ........................ 44
■ Procedure ....................................................................................................... 44
■ General Settings ............................................................................................ 46
■ General Settings (For Key Operator) ............................................................. 46
■ Copier Settings ............................................................................................... 49
■ Copier Settings (For Key Operator) ............................................................... 50
■ Printer Settings ............................................................................................... 51
■ Printer Settings (For Key Operator) .............................................................. 52
■ Scanner Settings ............................................................................................ 53
For Example ................................................................................................................................... 54
■ Changing the Paper Size (Paper Tray) .......................................................... 54
■ Department Counter ....................................................................................... 56
■ Network Settings ............................................................................................ 56
Combined Function Table ............................................................................................................ 58
Accessories
Components .................................................................................................................................. 59
Network Scanner (Option)
Document Scanning ..................................................................................................................... 60
■ Document Scanning ....................................................................................... 60
Address Book ................................................................................................................................ 62
■ Adding your PC’s IP Address ......................................................................... 62
■ Editing/Erasing your PC’s IP Address ............................................................ 62
Function ......................................................................................................................................... 64
■ Scan Parameters ........................................................................................... 64
■ Select Mode ................................................................................................... 64
Direct Connection (with Crossover Cable) ................................................................................. 66
■ Direct Connection (with Crossover Cable) ..................................................... 66
Problem Solving
Troubleshooting ............................................................................................................................ 68
Replacing the Battery/Set the Date and Time ............................................................................. 70
Appendix
Specifications ................................................................................................................................ 72
■ DP-1520P/1820P/1820E (For Copier) ........................................................... 72
■ ADF (DA-AS181)/i-ADF (DA-AR202) ............................................................. 72
■ Network Scanner (DA-NS180) ....................................................................... 73
■ 2nd/3rd/4th Paper Tray (DA-DS184/DS185) .................................................. 73
Options and Supplies ................................................................................................................... 74
■ Options ........................................................................................................... 74
■ Supplies ......................................................................................................... 74
6
Getting To Know
Your Machine
Getting To Know Your Machine
Precautions
■ Laser Safety
LASER SAFETY
This unit employs a laser. Only qualified service personnel
should attempt to service this device due to possible eye injury.
CAUTION:
USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
■ Caution Label
For Europe
Except Europe
■ Energy Star
As an ENERGY STAR® Partner, Panasonic has determined that this product meets the
ENERGY STAR® guidelines for energy efficiency.
This voluntary program specifies certain energy consumption and usage standards.
This product will automatically “power down” after a specified period of non-use. The use of
this ENERGY STAR® compliant product will reduce energy consumption and ultimately benefit
the environment.
The default functions can be adjusted depending on your office requirements.
Please ask your authorized Panasonic dealer for more details.
7
Getting To Know Your Machine
Precautions
For Your Safety
To prevent severe injury and loss of life, read this section carefully before using the Panasonic
DP-1520P/1820P/1820E to ensure proper and safe operation of your machine.
■ This section explains the graphic symbols used in this Operating Instructions manual.
WARNING:
Denotes a potential hazard that could result in serious injury or death.
CAUTION:
Denotes hazards that could result in minor injury or damage to the machine.
■ This section also explains the graphic symbols used in this Operating Instructions manual.
These symbols are used to alert operators to a specific operating procedure
that must not be performed.
These symbols are used to alert operators to a specific operating procedure
that must be emphasized in order to operate the machine safely.
Installation and Relocation Cautions
CAUTION
Do not place the machine near heaters or volatile, flammable, or combustible materials
such as curtains that may catch fire.
Do not place the machine in a hot, humid, dusty or poorly ventilated environment.
Prolonged exposure to these adverse conditions can cause fire or electric shocks.
Place the machine on a level and sturdy surface that can withstand a weight of 40kg. If
tilted, the machine may tip-over and cause injuries.
When relocating the machine, contact your Service Provider.
When moving the machine, be sure to unplug the power cord from the outlet. If the
machine is moved with the power cord attached, it can cause damage to the cord which
could result in fire or electric shock.
Power and Ground Connection Cautions
WARNING
Ensure that the plug connection is free of dust. In a damp environment, a contaminated
connector can draw a significant amount of current that can generate heat and
eventually cause fire over an extended period of time.
Always use the power cord provided with your machine. When an extension power cord
is required, always use a properly rated cord.
● 240V 13A
If you use a cord with an unspecified current rating, the machine or plug may emit smoke
or become hot to the touch externally.
Do not attempt to rework, pull, bend, chafe or otherwise damage the power cord. Do not
place a heavy object on the cord. A damaged cord can cause fire or electric shocks.
8
Getting To Know
Your Machine
Never touch a power cord with wet hands. Danger of electric shock exists.
If the power cord is broken or insulated wires are exposed, contact your Service Provider for a
replacement. Using a damaged cord can cause fire or electric shocks.
Stop operation immediately if your machine produces smoke, excessive heat, unusual noise, or smell,
or if water is spilt onto the machine. These conditions can cause fire. Immediately switch Off and
unplug the machine, and contact your Service Provider.
Do not disconnect or reconnect the machine while it is on. Disconnecting a live connector can deform
the plug and cause fire.
When disconnecting the machine, grasp the plug instead of the cord. Forcibly pulling on a cord can
damage it and cause fire or electric shock.
When the machine is not used over an extended period of time, switch it Off and unplug it. If an unused
machine is left connected to a power source for a long period, degraded insulation can cause electric
shocks, current leakage or fire.
Be sure to switch Off and unplug the machine before accessing the interior of the machine for cleaning,
maintenance or fault clearance. Access to a live machine’s interior can cause electric shock.
Be sure to switch Off and unplug the machine before accessing the interior of the machine for
accessing interface cables, maintenance or fault clearance. Access to a live machine’s interior can
cause electric shock.
Once a month, unplug the machine and check the power cord for the following. If you notice any
unusual condition, contact your Service Provider.
● The power cord is plugged firmly into the receptacle.
● The plug is not excessively heated, rusted, or bent.
● The plug and receptacle are free of dust.
● The cord is not cracked or frayed.
Others
■ The machine has a built-in circuit for protection against lightning-induced surge current. If lightning strikes in your
neighbourhood, switch Off the machine. Disconnect the power cord from the machine and reconnect only when
the lightning has stopped.
■ If you notice flickering or distorted images or noises on your audio-visual units, your machine may be causing
radio interference. Switch it Off and if the interference disappears, the machine is the cause of the radio interference.
Perform the following procedure until the interference is corrected.
● Move the machine and the TV and/or radio away from each other.
● Reposition or reorient the machine and the TV and/or radio.
● Unplug the machine, TV and/or radio, and replug them into outlets that operate on different circuits.
● Reorient the TV and/or radio antennas and cables until the interference stops. For an outdoor antenna, ask
your local electrician for support.
● Use a coaxial cable antenna.
Operating Safeguards
WARNING
Do not touch areas where these caution labels are attached to the surface may be very hot, and cause
server burns.
Do not place any liquid container such as a vase or coffee cup on the machine. Spilt water can cause
fire or shock hazard.
Do not place any metal parts such as staples or clips on the machine. If metal and flammable parts get
into the machine, they can short-circuit internal components, and cause fire or electric shocks.
If debris (metal or liquid) gets into the machine, switch Off and unplug the machine. Contact your
Service Provider. Operating a debris-contaminated machine can cause fire or electric shock.
Never open or remove machine covers that are screwed with screws unless specifically instructed in
the “Operating Instructions”. A high-voltage component can cause electric shocks.
Do not try to alter the machine configuration or modify any parts. An unauthorized modification can
cause smoke or fire.
9
Getting To Know Your Machine
Precautions
CAUTION
Do not place a magnet near the safety switch of the machine. A magnet can activate the
machine accidentally, resulting in injuries.
Do not use a highly flammable spray or solvent near the machine. It can cause fire.
When copying a thick document, do not use excessive force to press it against the
document glass. The glass may break and cause injuries.
Never touch a labelled area found on or near the heat roller. You can get burnt. If a sheet
of paper is wrapped around the heat roller, firstly switch off the machine and allow it to
cool. Once the heat roller has cooled you can remove the paper. If this becomes difficult
in any way then contact your Service provider.
Do not use conductive paper, e.g. folding paper, carbonic paper and coated paper. When
a paper jam occurs, they can cause a short circuit and fire.
Do not place any heavy object on the machine. An off-balance machine can tip-over or
the heavy object can fall, causing damage and/or injuries.
Keep the room ventilated when using the machine for an extended period of time to
minimize the ozone density in the air.
When copying with the document cover open, do not look directly at the exposure lamp.
Direct eye exposure can cause eye fatigue or damage.
Pull out paper trays slowly to prevent injuries.
When removing jammed paper, make sure that no pieces of torn paper are left in the
machine. A piece of paper remaining in the machine can cause fire. If a paper jam
proves difficult to remove or cannot be found then switch off your machine and contact
your service provider.
Others
■ When clearing a paper jam or other fault, follow the appropriate procedure given in the Operating
Instructions.
Consumable Safeguards
WARNING
Never throw a toner cartridge into an open flame. Toner remaining in the cartridge can
cause an explosion and you can get burnt.
Never throw toner or a waste toner container or a toner cartridge into an open flame. It
can cause an explosion and you can get burnt.
Keep button batteries out of the reach of children. If a button battery is swallowed
accidentally, get medical treatment immediately.
CAUTION
Never heat the drum cartridge, or scratch its surface. A heated or scratched drum can be
hazardous to your health.
Do not mix new and old batteries together. Otherwise, batteries can burst or leak,
causing fire or injuries.
Be sure to use the specified type of batteries only.
Ensure that batteries are installed with correct polarity. Incorrectly installed batteries can
burst or leak, resulting in spillage or injuries.
10
Getting To Know
Your Machine
For Your Safety
■ The maximum power consumption is 1.3 kW.
A properly wired (grounded), dedicated, 240V ,15A outlet is required. Do not use an extension cord.
The power cord on this machine must be used to disconnect the main power.
Please ensure that the socket outlet is installed near the machine and is easily accessible.
Caution Note: Unplug the power cord from the wall outlet before removing covers.
Supplies
■ Store the Toner Bottle and paper in cool areas with low humidity.
● Use high quality 60 - 90 g/m2 (Sheet Bypass: 55 - 133 g/m2) paper.
● For optimum performance, it is recommended that only Panasonic Brand supplies are used in the machine.
● Certain types of transparency film may not be compatible and may damage your machine.
Consult with an authorized Panasonic dealer for advice regarding non-standard paper types.
(Panasonic has tested “3M PP2500” transparency film and found it to be compatible.)
● Panasonic recommends using high quality 55 - 133 g/m2 paper, using an inferior paper may cause excessive
paper curl, requiring you to empty out the Output Tray more often to avoid paper jams.
Installation
■ The machine should not be installed in areas with the following conditions:
● Extremely high or low temperature and humidity.
Ambient conditions Temperature: 10 – 30°C
Relative humidity: 30 – 80 %
● Where temperature and humidity can change rapidly, causing condensation.
● Direct exposure to sunlight.
● Directly in the air conditioning flow.
● In areas of high dust concentration.
● In areas of poor ventilation.
● In areas with chemical fume concentration.
● In areas with extreme vibration.
● With unstable or uneven conditions (floors, etc.).
Illegal Copies
It is unlawful to make copies of certain documents.
Copying certain documents may be illegal in your country. Penalties of fines and/or imprisonment may be imposed on those found guilty. The following are examples of items that may be illegal to copy in your country.
●
●
●
●
●
●
Currency
Bank notes and cheques
Bank and government bonds and securities
Passports and identification cards
Copyright material or trademarks without the consent of the owner
Postage stamps and other negotiable instruments
This list is not inclusive and no liability is assumed for either its completeness or accuracy.
In case of doubt, contact your legal counsel.
Notice:
Install your machine near a supervised area to prevent illegal copies from being made.
11
Getting To Know Your Machine
Precautions
Ventilation
■ The machine should be installed in a well-ventilated area to minimize the ozone density in the air.
WARNING For U.K.
This appliance is supplied with a moulded three pin mains plug for your safety and
convenience.
A 13 amp fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the replacement fuse has a rating
of 13 amps and that it is approved by ASTA or BSI to BS1362
Check for the ASTA mark or the BSI mark on the body of the fuse.
If the plug contains a removable fuse cover you must ensure that it is refitted when the
fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement cover is
obtained.
A replacement fuse cover can be purchased from your local Panasonic Dealer.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR
OFFICE THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND
DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS
INSERTED INTO ANY 13 AMP SOCKET.
If a new plug is to be fitted please observe the wiring code as shown below.
If in any doubt please consult a qualified electrician.
WARNING: THIS APPLIANCE MUST BE EARTHED.
IMPORTANT: The wires in this mains lead are coloured in accordance with the following
code:
Green and Yellow : Earth
Blue
: Neutral
Brown
: Live
As the colours of the wires in the main lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the
plug which is marked by letter E or by the safety Earth symbol “
” or coloured GREEN or
GREEN-AND-YELLOW.
The wire which is coloured BLUE must be connected
to the terminal in the plug which is marked with the
letter N or coloured BLACK.
The wire which is coloured BROWN must be
connected to the terminal in
the plug which is marked with the letter L or coloured
N
RED.
How to replace the fuse.
Open the fuse compartment with a screwdriver and
replace the fuse.
12
Getting To Know
Your Machine
Handling
■ Do not turn the Power Switch Off or open the Front Cover during copying.
■ Energy Save Mode Notice
● The following function, will not work if the Energy Saver Mode setting is set to the Shutdown mode.
When using any of the following functions, we recommend that you leave the Energy Saver Mode in the initial
factory default setting (Sleep). (See page 46)
• Printer Function (Local USB and Network Connections)
• Internet Fax/Email Function
• Facsimile Function
When the LAN cable is not connected and DHCP DEFAULT is "VALID" (See page 47).
■ Key Operator Password
● The Initial Machine Modes can be checked or changed with the Function Modes, however, these modes require
the Key Operator Password.
For Key Operator : When setting up this machine, please consult with the authorized service provider,
and decide on the Key Operator Password together, then record it and keep it in a
safe place for future reference.
■ Dept. (Departmental) Code
INPUT DEPT. CODE
When the Department Counter function is set up, the Dept. (Departmental) Code input
screen is displayed on the Display. A registered departmental Code (1 to 8-digit) is
required to gain access to each secured function, or the secured Copy/Fax/Scanner
function(s) cannot be used. Please consult with the key operator regarding the
Departmental Code(s) for the desired function.
Procedures :
Input a registered departmental code (1 to 8-digit).
Press the SET Key or START Key.
********
1 to 8-digit
■ Total Counter View Mode on the LCD
The Total Counter can be displayed on the Panel Display by pressing “COPY SIZE” and “PAPER TRAY” keys
simultaneously in Standby mode for quick reference.
TOTAL COUNTER
1234
■ Power Switch
If the Hard Disk Drive Unit (DA-HD18) is installed, to prevent a Scan Disk Function from being performed (similar
to Windows OS when the power is abruptly interrupted), it is important to follow the step sequence below when
turning OFF the Power Switch on the machine.
1. If the machine is in the “ENERGY
SAVER (Shutdown Mode)” you may
turn the Power Switch on the Right
Side of the machine to the OFF
position. If it is not in the “ENERGY
SAVER (Shutdown Mode)”, continue to
step 2 below.
2. Press “FUNCTION” and “ENERGY
SAVER” keys simultaneously first.
The Energy Saver Key will light.
3. Turn the Power Switch on the Right
Side of the machine to the OFF
position.
■ Maximum Copies Limitation
After setting the maximum allowed number of copies for each department (see page 56), consult with your Key
Operator when the total copy count reaches the designated limit and the "DEPT.MAXIMUM COPIES HAS BEEN
REACHED" message appears on the LCD.
13
Getting To Know Your Machine
Operation Chart
■ Quick Operation Chart
1
2
Face Up
A
B
C
From
ADF/i-ADF
(Option)
Original Guides∗ Tray
Original Guides
● If the original is not positioned
properly, a portion of the original
may not be copied.
● For originals smaller than A5
size, position the original within
the A5 area and select A5.
A3
B4
Turn the Power
Switch to the
ON position
A4-R
Face Down
A5
From
Platen
Adding Paper
If set in other
function mode
Adjust to the
(Max. 50 A4
original's width
size originals)
∗ Hold the guides by the center when
adjusting the width
A5-R
A4
or
● Adding Paper (Paper Tray)
The following steps are for Paper Tray-1, use the same procedures for other optional Paper Trays.
1
2
Paper Tray
3
Paper Tray
Max Level
Indicator
NOTE:
When changing the paper size,
refer to page 54.
Load Paper: Face Up
Paper Weight: 60 - 90 g/m2
Paper Capacity: 550 Sheets (80 g/m2)
NOTE:
Make sure that the paper is set
properly and that it does not exceed
the Max. Level indicator.
2
3
● Adding Paper (Sheet Bypass)
Copying on Special Paper, etc.
1
PUSH
Until it stops
Face Down
4
Until it stops
Sheet Bypass
4
14
Width Guides
Adjust the width guides.
Incorrect adjustment may cause the
paper to wrinkle, misfed or skew.
Upper Limit Guides
Load Paper
(Do not exceed limit guides)
Paper Weight: 55 - 133 g/m2
Paper Capacity: 50 sheets/80 g/m2
To add paper to the Sheet Bypass,
remove the leftover paper from the
tray, and align it with the additional
paper and load them together onto the
tray.
Getting To Know
Your Machine
3
4
Reduction/
Enlargement
only
From
Platen only
A4 ->A4
[A4 ]
ZOOM:100% COPIES:001
5
A4 ->A5 [A5 ]
ZOOM: 71% COPIES:001
Number of
Copies
(Max. 999)
Select desired settings
(See pages 24-43)
Interrupt
(See page 42)
Erase
(See page 34)
Sort
(See page 36)
Effects
(See page 36)
2 Page Copy
(See page 32)
Double
Exposure
(See page 32)
N in 1
(See page 30)
2-Sided/Original
Copy
(See pages 26-29)
2-Sided Copy:
DP-1820E only
Type of
Original
Manual
Exposure
(See page 25)
Zoom Mode
(See page 25)
■ Problem Solving
Adding Paper
Replacing Toner Bottle/Toner Waste Container
(See page 16)
Checking Toner
(See below)
Removing a Misfed Paper
(See page 16)
U## (User Error Code)
(See page 20)
J## (Jam Error Code)
(See page 21)
E## (Machine Error Code) (Call your Service provider)
REPLACE DRUM UNIT
(Call your Service provider)
● Toner Level Check Operation
When the message "CHECKING TONER PLEASE WAIT" appears, the machine is checking the toner level and no
operation through control panel would be accepted.
● Memory Full
If the memory overflows while scanning originals, the message “MEMORY FULL CONTINUE? 1:YES 2:NO”
will appear on the LCD. If this occurs, follow the instructions on the LCD.
If this occurs frequently, adding optional memory is recommended, consult with an authorized service provider.
15
Getting To Know Your Machine
Operation Chart
■ Problem Solving
● Replacing Toner Bottle/Toner Waste Container
1
(ATTENTION)
● For optimum copy quality
use the recommended
Panasonic Toner. Store
Toner Bottle in a cool
dark place. Do not unseal
the Toner Bottle unless
you are ready to use it.
Front Cover
2
Toner Waste Container
6
Corona Cleaner
NOTE:
Do not reuse the toner from the
Toner Waste Container.
Slide the Corona Cleaner in and out 3 or
4 times slowly, then return the Corona
Cleaner Handle to original position.
7
Toner Bottle (New)
Shake it well
● Removing Misfed Paper (Paper Exit Area) (J46)
1
2
(Ex.)
REMOVE MISFED PAPER
J46
Left Cover
Jam Removal
Knob
● Removing Misfed Paper (Paper Transport/Fusing Area) (J01, J30, J31, J33, J45, J48, J95)
1
Paper Tray
2
(Ex.)
REMOVE MISFED PAPER
J48
(ATTENTION)
● Do not scratch or touch the
surface of the OPC Drum
(Green) with bare hands. The
OPC Drum is sensitive to light.
To prevent optical exposure
problems, do not expose the
OPC Drum to direct sunlight or
bright light.
Left Cover
6
Misfed Paper
16
7
Paper Tray
Getting To Know
Your Machine
3
Cap
4
5
Corona Cleaner Handle
6
Toner Bottle (Empty)
Toner Waste Container
To
Release
8
9
Toner Bottle (New)
10
Toner Waste
Container (New)
Toner Bottle (New)
Close the Front Cover.
To
Lock
3
Misfed Paper
4
Left Cover
3
4
Heat Roller Cover
5
Misfed Paper
Misfed Paper
6
Pull out
Jam Removal Knob
8
Left Cover
17
Getting To Know Your Machine
Operation Chart
■ Problem Solving
● Removing Misfed Paper (ADF: Option for DP-1520P/1820P/1820E) (J70, J71, J79, J92, J93)
1
2
(Ex.)
REMOVE MISFED PAPER
J70
Misfed Paper
ADF Cover
● Removing Misfed Paper (i-ADF: Option for DP-1820E) (J70, J71, J72, J73, J76, J78, J79, J92, J93)
1
2
(Ex.)
REMOVE MISFED PAPER
J70
ADF Cover
6
Misfed Paper
7
Exit Unit
ADF Tray
● Removing Misfed Paper (2nd/3rd/4th Paper Tray: Option)
(J02, J03, J04, J07, J08, J09, J12, J13, J14, J22, J23, J24)
1
2
(Ex.)
REMOVE MISFED PAPER
J02
6
7
Paper Tray
18
Misfed Paper
Feed Cover
Feed Cover
Getting To Know
Your Machine
3
4
ADF
Misfed Paper
ADF Cover
3
4
5
Misfed Paper
6
Exit Unit
ADF Tray
8
Misfed Paper
9
10
2
1
ADF Cover
3
4
5
6
Misfed Paper
Paper Tray
Pull-out
Misfed Paper
19
Getting To Know Your Machine
■ Problem Solving
● Removing Misfed Paper (J19, J32, J82, J85, J87: ADU for DP-1820E only)
1
EX.
REMOVE MISFED PAPER
J82
2
Left Cover
Misfed Paper
● User Error Codes (U Code)
U20
U21
U90
U01
U13
U14
U15
U16
U25
U07
Code
U01
U07
U13
U14
U15
U16
20
Check Points
Front and/or Left Cover is open.
Feed Cover is open. (See page 18)
Low Toner or Out of Toner.
Toner Waste Container is full.
Toner Waste Container is incorrectly installed.
Developer Unit is incorrectly installed.
Call your Service Provider.
Code
Check Points
U20
ADF Cover is open.
U21
ADF/i-ADF is opened while scanning from ADF/
i-ADF.
Toner hardened inside the Toner Bottle. Remove
the Toner Bottle and shake it well.
Battery requires replacement.
(See page 70)
U25
U90
Getting To Know
Your Machine
3
Misfed Paper
4
5
Misfed Paper
Jam Removal
Knob
Left Cover
● Jam Error Codes (J Code)
Code
J00
J01
J02,
J03,
J04
J07,
J08,
J09,
J12,
J13,
J14,
J22,
J23,
J24
Check Points
Remove paper from the Sheet Bypass.
Open and close the Left Cover (Shown in
above step 5 illustration).
Pull the paper tray out and remove jammed
paper from the standard paper tray (Tray-1)
(See page 16)
Pull the paper tray out and remove jammed
paper from the optional paper trays (Tray-2 to 4)
(See page 18)
Remove misfed paper.
(See page 18)
Code
Check Points
J30,
J31,
J33,
J45,
J46,
J48,
J95∗
Remove misfed Paper.
(See page 16)
∗J95: Check the paper size of the paper tray.
(See page 54)
J19,
J32,
J82,
J85,
J87
J70,
J71,
J72,
J73,
J76,
J78,
J79,
J92,
J93
Removing misfed Paper.
(See page 20)
Remove misfed Paper.
(See page 18)
NOTE: ● The J## Code indicates the most probable Jam location. If the jam message reappears after the jam is cleared,
paper is most likely jammed at other location(s). Check the Jam Error Codes Table above for other check points
and remove all misfed paper.
● Make sure that the Jam Error Code and Misfed Indicator disappears after removing the misfed paper.
● The Jam Error Code and Misfed Indicator will not disappear if the paper is still jammed in the machine. Check
again and remove all misfed paper.
21
Before Starting
Control Panel
1
2
3 4 5
16
15
14
6
7 8 9
Icon
29
Contents
INTERRUPT Key
Selects Interrupt mode.
(See page 42)
ERASE Key
Selects Edge, Book or
Margin mode. (See page 35)
1
3
No.
Icon
2
4
MEMORY Keys
Selects Job Memory mode.
(See pages 42, 43)
5
6
Original Mode Select
Keys/Indicators
Selects original mode.
(See pages 25 and 60)
7
8
Energy Saver Key
Saves power while the
machine is not in use.
(See page 42)
ORIGINAL SIZE Key
To select an original size.
9
11
10
12
DUPLEX Key
Selects a 2-Sided or 1-Sided
copy. (See pages 26-29)
2-Sided Copy: DP-1820E
only
N in 1 Key
Selects N in 1 copy mode.
(See page 31)
13
15
b
c
d
A4 ->A4
[A4 ]
ZOOM:100% COPIES:001
e
22
f
17
a
b
c
d
e
f
LCD
Display
28
Contents
2 PAGE COPY Key
Selects 2 Page Copy mode.
(See page 32)
EFFECTS Key
Selects Image Repeat or
Centering mode.
(See page 36)
COPY Key
To use the unit as a
photocopier.
SCAN/FILE Key
Used for network scanning
(option for DP-1820P/1820E)
(See pages 60-65)
LIGHTER/DARKER Key/
Indicators
To adjust the Manual
Exposure.
(See pages 25 and 60)
PRINT DATA LED
(GREEN)
Lights when receiving
print data.
COPY SIZE Key
To select a copy size.
14
DOUBLE EXPOSURE Key
Selects Double Exposure
mode. (See page 32)
16
SORT Key
Selects Electric Sort mode.
(See page 36)
LCD Display (Copy Function)
a
12
13
Keyboard (Option)
Inputs characters for Station Name,
Email Address, Parameter settings,
Directory Search, etc.
(See pages 60-63)
No.
10 11
Original Size
Copy Size
Rotating Paper Size
Paper Size in Paper Tray
Zoom Ratio
Number of Copies
19
20
21
22
Before Starting
18
∗ Used for Fax, Internet Fax, and
Email Functions.
(except for the ABBR Key)
(See page 61)
23
27
26
No.
17
19
Icon
25
24
Contents
PAPER TRAY Key
Selects the paper tray.
20
21
RESET Key
Resets all features to the
initial power-on state.
23
START Key
Starts the copy job.
25
CLEAR Key
Clears the copy count in
the display.
29
18
Cursor Key
To select the zoom
ratio, etc.
Keypad
Sets copy quantities or
inputs the parameter(s) of
Function settings.
27
No.
ACTIVE LED (GREEN)
Lights when machine is
active.
Sets scanning resolution.
(See page 60)
22
Icon
Contents
Warning Indications
When unit is used as a
photocopier.
: Add Paper (See page 14)
: Replace Toner Bottle
(See page 16)
: Removing misfed paper
(See pages 16-21)
: Call Service
(For DP-1520P)
STOP Key
Stops the copy run.
24
SET Key
Sets the parameter(s) of
Function settings.
26
FUNCTION Key
Use when changing the
paper size, initial function
values (default values) and
key operator settings.
28
ALARM LED (RED)
Lights/Flashes when
trouble occurs.
Lights:
Machine detected a trouble status
● No paper in the selected tray or toner
has run out.
● Machine detected trouble, such as
paper misfeed or jam.
Flashes:
Machine detected an alarm status
● No paper in the Tray. (Not selected tray).
● Toner is getting low, etc.
NOTE:
To adjust the brightness of the LCD display, press and while holding down the CLEAR Key, keep
pressing the ORIGINAL SIZE or COPY SIZE Key until the desired brightness is achieved.
ORIGINAL SIZE : Dimmer
COPY SIZE
: Brighter
23
Making Copies
Basic Copy
■ Copying the Same Size Originals (1:1)
Copy size is automatically selected.
1
2
For ADF
From Platen only
A3
: A3
For i-ADF
100%
or
B4
: B4
A4
: A4
A4
: A4-R
A5
: A5
A5
: A5-R
■ Position of the Original(s)
● Feeds originals automatically
Up to 50 A5/A4 size (80 g/m2)
(Up to 30 B4/A3 size)
∗ ADF for DP-1520P/1820P/
1820E
i-ADF for DP-1820E only
A3
B4
A4-R
Original Guides
A5
For Platen
(Face Down)
A5-R
A4
For ADF/i-ADF∗
(Face Up)
● When copying
a thick Booklet,
do not close
the ADF/i-ADF.
■ Copying with Preset or Variable Zoom Ratios
1
Preset Ratios (ex: Enlargement)
2
For ADF
A5
For i-ADF
A4
Variable Zoom Ratios
Copies with variable zoom ratios from 50 % to
200 % in 1 % increments.
50%
24
200%
or
From Platen only
A3
: A3
B4
: B4
A4
: A4
A4
: A4-R
A5
: A5
A5
: A5-R
4
Select type of Original(s)
PHOTO
: Mainly Photo
TEXT/PHOTO: Text and Photo
combined
TEXT
: Mainly Text
Making Copies
3
Number of
Copies
(Max. 999)
Adjust the Manual Exposure
Press DARKER or LIGHTER
Key (5 steps)
■ Using the ADF/i-ADF (Option)
Set the originals up to the Upper Limit Indicator/Guide.
Originals that cannot be used
● Post Cards, Drawing Papers, Transparencies,
Labelling Papers, Heavyweight Papers, Thin
Art Papers, Film Thermal Papers
Inappropriate Originals
● Paper with a smooth surface such as glossy
and coated papers
● Transparencies
● Originals with a Lead Edge that is ripped,
creased, folded, punched, or glued.
● Mixed width size Originals (except a
combination of A3 and A4)
● Paste-ups
● Pressure sensitive or carbon backed papers
● Paper with excessive curl
● Stapled originals
● Freshly printed copies from a laser printer
● Originals with fresh White-Out (Liquid paper
correction fluid)
3
For Preset Ratios
A3
: A3
B4
: B4
A4
: A4
A4
: A4-R
A5
: A5
A5
: A5-R
Upper Limit Indicator (A)
B
Upper Limit Indicator (A)
A
B
Upper Limit Guide (B)
A
Upper Limit Guide (B)
i-ADF∗
ADF
Tray
ADF
ADF Tray
Original Guides
Adjust to the original's width
∗ ADF for DP-1520P/1820P/1820E
i-ADF for DP-1820E only
For Variable Zoom Ratios
Up to 200% in 1%
4
Number of
Copies
(Max. 999)
Down to 50% in 1%
25
Making Copies
Creative Features
■1
1
2 Copy, 2
2 Copy
2 Copy, 2
1-Sided
1 Copy (DP-1820E with optional i-ADF only)
1 For i-ADF
2
2-Sided Copy
From Platen only for
1
2 Copy
or
2
2 Copy
2-Sided
2-Sided Copy
(1
2
1 Copy
2-Sided
2 Copy only)
1-Sided Copy
Steps 6 to 9 for 1
from Platen:
6
NOTE: 1. When copying 2
2 or 2
1 Copy
using the optional ADF, see below.
2. If the memory overflows while
scanning originals, all scanned data
will be cancelled. If this occurs,
restart from Step 1.
2 Copy (DP-1820E only), 2
Copying 2
2 or 2
ADF (not i-ADF)
2
2 Copy
2-Sided
7
ANOTHER ORIGINAL?
1:YES 2:NO
: A4
A4
: A4-R
A5
: A5
A5
: A5-R
Next Original
2
2-Sided Copy
5
1-Sided Copy
2-Sided
Original to 2Sided Copy
ABC
3
2-Sided
A4
NOTE: If “2: NO” is selected, the
machine will start copying only
one side of the original(s).
1
A
B
C1
1 Copy
: B4
1: YES
Go to next step.
Odd Number Pages
Long Edge
Short Edge
Originals
Originals
2
B4
2 Copy
1 Copy
1 For ADF only
1 Copy with optional
: A3
A
B
C
■2
A3
3
5
2-Sided
Original to 1Sided Copy
SET ORIGINAL ON ADF
Place the reverse side of
the original(s) of step 1 in
the order and direction of
ejection.
INSERT SECOND SIDE
ORIENTATION AS IS
Page No.
A
B
1C
3
Above
Step 1
5
5
2
NOTE: When copying 1
Copy using with the
optional ADF (not i-ADF),
proceed steps same as
using i-ADF.
6
Even Number Pages
Long Edge
Short Edge
Originals
Originals
4
Reverse Side
2
5
A
B
2C
Step
6
4
26
6
4
2
5
4
Bind Position
within 10 seconds
2 Copy, 2
(For 1
1-Sided Original
to 2-Sided Copy
2-Sided Original
to 2-Sided Copy
6
2-Sided Original
to 1-Sided Copy
8
9
From Platen
only.
1 Copy)
Long Edge
~
Number of
Copies
(Max. 999)
Short Edge
9
10
The following steps, illustrate how to
make multiple copies when the Sort
Mode is selected. (See page 36)
ANOTHER ORIGINAL?
1:YES 2:NO
1: YES
2: NO
Exits this
mode.
Continues to copy another
original, repeat steps 1
and 5- 2 to step 8.
Starts making copies.
4
3
Bind Position
within 10 seconds
1 Copy only)
(For 2
5
Long Edge
Number of
Copies
(Max. 999)
Short Edge
6
7
PRESS START TO
CONTINUE
8
SET ORIGINALS ON ADF
NOTE: If the page count for the Back side does
not match the page count for the Front
side (i.e. page double-fed) of the 2-Sided
originals, a "TOTAL PAGE MISMATCH"
will be displayed and all scanned data
will be cancelled. If this occurs, restart
from Step 1 and Step 4- 2 to Step 6.
Exits this
mode.
27
Making Copies
3
Making Copies
Creative Features
■ Book
Book
2 Copy (DP-1820E only)
For BooK Format is Flipping:
2-Sided Copy
The book format and page order can be
set in the Copier Settings, "Parameter No.
14 BOOK 2 DEFAULT" (See page 50)
1
2
Original Size:
A3, B4, A4-R or A5-R
(Book Format: Flipping)
(Page Order: L
R)
5
(Book Format: Facing)
NOTE: ∗ If the selected original size is not
corrected, book original will not be
copied correctly as sample images.
The following steps, illustrate how to make
multiple copies when the Sort Mode is selected.
(See page 36)
ANOTHER ORIGINAL?
1:YES 2:NO
Blank
Page
(Page Order: L
Select A3, B4,
A4-R or A5-R
size∗
R)
1: YES
2: NO
Continues to copy another
original, repeat steps 1 and 4- 2 .
Starts making copies.
For BooK Format is Facing:
1
2
Original Size:
A3, B4, A4-R or A5-R
6
7
Next Original
(page)
28
Select A3, B4,
A4-R or A5-R
size∗
3
4
Making Copies
5
Select Book Original
to 2-Sided Copy∗
Number of Copies
(Max. 999)
6
Exits this
mode.
3
NOTE: ∗ A copy size will be automatically selected.
If a selected copy size paper is not set into the paper tray(s),
set paper on the Sheet Bypass (See page 14) or select
another copy size with COPY SIZE Key (See page 25).
4
5
ANOTHER ORIGINAL?
1:YES 2:NO
or
1: YES
Continues to Copy
another page, go to
next step 6
2: NO
Starts making copies
Select Book Original
to 2-Sided Copy∗
Number of Copies
(Max. 999)
8
The following steps, illustrate how to
make multiple copies when the Sort
Mode is selected. (See page 36)
6
9
ANOTHER ORIGINAL?
1:YES 2:NO
1: YES
2: NO
Continues to copy another
original, repeat steps 1 and 4- 2
to step 8.
Starts making copies.
Exits this
mode.
29
Making Copies
Creative Features
■ N in 1
From two/four 1-Sided originals,
side by side, to 1-Sided pages.
1
2
For ADF
● 2 in 1 Copy
For i-ADF
From Platen only
● 4 in 1 Copy
1
2
or
1
2
3
4
3
4
NOTE:
If the original's Orientation is incorrect
when N in 1 copy mode is used, the
copy sequence may not reproduce
properly. If this occurs, change the N
in 1 default Orientation in the Copier
Settings, "Parameter No. 05 N in 1
DEF." (See page 49)
A
B
C1
AB C
1
A3
: A3
B4
: B4
A4
: A4
A4
: A4-R
A5
: A5
A5
: A5-R
2 in 1
5
Nin1
(1-2)
ENTER NO. OR ∨ ^
1:2in1?
PRESS SET TO SELECT
or
4 in 1
2:4in1?
PRESS SET TO SELECT
Portrait
2 in 1
or
or
4 in 1
Landscape
9
PRESS START TO
CONTINUE
10 For 4 in 1 Copy
ANOTHER ORIGINAL?
1:YES 2:NO
Select “1: YES”.
Repeat steps 8 and 9.
3 Select “1: YES”.
Repeat steps 8 and 9.
Combination for N in 1 copy operation.
1
2
2
Originals
1
Mode
2 in 1
30
2
2
1
1
Layout
1 2
2 1
1
2
2
1
1 2
2 1
3
For Preset Ratios
For Variable Zoom Ratios
4
A3
: A3
B4
: B4
A4
: A4
A4
: A4-R
A5
: A5
A5
: A5-R
Making Copies
5
Up to 200% in 1%
Down to 50% in 1%
6
7
8
Step 7 to 11
for Platen only
ANOTHER ORIGINAL?
1:YES 2:NO
9
1: YES
Go to next step.
Number of
Copies
(Max. 999)
Next Original
NOTE: If “2: NO” is selected,
the machine will start
copying one side of the
scanned original.
12
The following steps, illustrate how to make
multiple copies when the Sort Mode is selected.
(See page 36)
ANOTHER ORIGINAL?
1:YES 2:NO
1: YES
2: NO
Exits this
mode.
Continues to copy another original, repeat
steps 1 and 6- 2 to step 9 (10: 4 in 1).
Starts making copies.
1
2
3
4
3
4
Layout
2
Originals
1
Mode
1
2
3
12
34
13
24
1 2
3 4
1 3
2 4
12
34
13
24
21
43
2 1
4 3
31
42
3 1
4 2
4
4
3
2
4 in 1
1
11
21
43
31
42
31
Making Copies
Creative Features
■ 2 Page Copy
1
Copying two facing pages or a A3 size original
on two separate A4 size sheets.
2
Platen
Example: A3 size original
A3
Page Order: L→R
Starts copy from Left
page
A4
A3
6
The following steps, illustrate how to make multiple
copies when the Sort Mode is selected. (See page 36)
ANOTHER ORIGINAL?
1:YES 2:NO
Page Order: R→L
Starts copy from Right
page
NOTE:
The page order can be set in the Copier Settings,
"Parameter No. 16 2 PAGE MODE DEF." (See page 50)
Default Page Order: L→R
1: YES → Continues to copy another original, repeat
steps 1 and 5- .
2: NO → Starts making copies.
■ Double Exposure
From 2-Sided originals to 1-Sided copies
(side-by-side image).
Original Size:
A4 or A5
ex. A5
A
B
C
ABC
A
B
C
D
E
F
Front Side of Original
Original Size:
A4, A4-R, A5 or A5-R
size only
Back Side
Image
Copy Size: A4
ABC
Front Side
Image
DEF
Back Side
Image
NOTE:
When opening the Platen Cover or optional
ADF/i-ADF
● An incorrect position detection of the
original may occur when a strong light
shines on the glass during this mode.
● An incorrect exposure may occur when
there is a black line at the edge of the
original or an image which the machine
interprets as a black pattern in this mode.
32
2
Copy Size: A4R
Front Side
Image
ex. A5-R
1
6
7
Back Side
of Original
3
4
5
6
Select A3, B4,
A4-R or A5-R
size∗1
Original Size
A3
A4
Copy Size
A4
A5
Number of
Copies
(Max. 999)
7
NOTE:
∗1 If the selected original size is not corrected, book original will not
be copied correctly as sample images.
∗2 A copy size will be automatically selected.
Exits this
mode.
3
If a selected copy size paper is not set into the paper tray(s), set
paper on the Sheet Bypass (See page 14) or select another
copy size with COPY SIZE Key (See page 25).
4
5
ANOTHER ORIGINAL?
1:YES 2:NO
1: YES
NOTE
If “2: NO” is selected,
the machine will start
copying only scanned
original.
Select A4, A4-R,
A5 or A5-R
6
Number of
Copies
(Max. 999)
8
The following steps, illustrate how to
make multiple copies when the Sort
Mode is selected. (See page 36)
9
ANOTHER ORIGINAL?
1:YES 2:NO
1: YES
2: NO
Continues to copy another
original, repeat steps 1
and 4- 2 to step 7.
Starts making copies.
Exits this
mode.
33
Making Copies
Select a Copy
Size∗2
Making Copies
Creative Features
■ Erase (Margin/Edge)
Margin
1
2
For ADF
Shifts image to left, right, top or bottom.∗
For i-ADF
From Platen only
Edge
Creates a blank edge.∗
NOTE:
∗ Shift position of Margin and blank
edge value can be changed with
Copier Setting Mode. (See page 49)
or
6
A3
: A3
B4
: B4
A4
: A4
A4
: A4-R
A5
: A5
A5
: A5-R
For Margin
LEFT MARGIN
10mm
∨^
EQUAL RATE
VOID MARGIN = 5mm
^
For Edge
5 - 99 mm
■ Erase (Book)
Book
1
2
Eliminates dark inner binding shadows.
6
BOOK MARGIN
CENTER VOID =20mm ∨^
5 - 99 mm
34
A3
: A3
B4
: B4
A4
: A4
A4
: A4-R
A5
: A5
A5
: A5-R
3
4
5
ERASE MODE (1-3)
ENTER NO. OR ∨ ^
1:MARGIN?
PRESS SET TO SELECT
or
This Key will flash.
or
6
Making Copies
2:EDGE?
PRESS SET TO SELECT
: MARGIN
: EDGE
ERASE Key will be
changed from flashes
to lights.
7
8
Exits this
mode.
Number of
Copies
(Max. 999)
3
4
ERASE MODE (1-3)
ENTER NO. OR ∨ ^
5
3:BOOK?
PRESS SET TO SELECT
6
or
7
: Book
8
Exits this
mode.
Number of
Copies
(Max. 999)
35
Making Copies
Creative Features
■ Effects (Centering/Image Repeat)
1
Centering
2
Copy image can be centred automatically on
selected paper.
Open the ADF
or Platen Cover
Image Repeat
Creates continuous copy image on one sheet.
Minimum original size: 20 x 20 mm.
6
The dotted line can be
set to “None” or “Print”
by the Copier Settings,
"Parameter No. 15
IMAG. REPEAT DOT."
(See page 50).
■ Sort
1
Sort
Number of
Copies
(Max. 999)
2
For ADF
Multiple copy sets are sorted automatically.
1
2
1
3
2
1
3
For i-ADF
2
3
Lights
Sort mode is
selected.
Rotate-Sort
Multiple copy sets are sorted automatically
and are stored on the Output Tray in
alternate direction (rotate). Initial SortRotate Mode is “1:OFF”, this setting can be
selected within the General Settings. (See
page 46)
2
1
or
Steps 5 to 8 from Platen only
3
1
2
1
3
2
3
(Available A4 size paper only)
5
ANOTHER ORIGINAL?
1:YES 2:NO
6
Non-Sort
Copy is stored on the Output Tray.
NOTE
Initial Sort Mode settings can be selected
within the Copier Settings, "Parameter No. 10
SORT PRIORITY ADF or No. 11 SORT
PRIOR. GLASS". (See pages 49 and 50)
Initial Sort Priority Setting:
For ADF: 2:Sort; For Platen: 1:Non-Sort
36
1: YES
Go to next step
NOTE
If “2: NO” is selected, the
machine will start copying
one side of the original(s).
Next Original
3
EFFECTS
(1-2)
ENTER NO. OR ∨ ^
4
1:CENTERING?
PRESS SET TO SELECT
5
PAPER TRAY
TRAY-1
∨ ^
or
2:IMAGE REPEAT?
PRESS SET TO SELECT
: Centering
: Image Repeat
TRAY-1
TRAY-2
TRAY-3
TRAY-4
BYPASS
7
NOTE: Tray-2, 3 and 4 are
options. (See page 59)
Exits this
mode.
NOTE: An incorrect position detection of the original may occur when a
strong light shines onto the glass during the Centering and
Image Repeat mode.
Also an image which the copier interprets as a black pattern in
the Centering and Image Repeat modes.
3
4
5
A3
: A3
B4
: B4
A4
: A4
A4
: A4-R
A5
: A5
A5
: A5-R
PRESS START TO
CONTINUE
~
8
From Platen
only
From Platen only
7
Making Copies
or
6
Number of
Copies
(Max. 999)
8
ANOTHER ORIGINAL?
1:YES 2:NO
: YES
Continues to copy another
original, repeat steps 1 and 4- 2
to step 7.
: NO
Starts making copies.
37
Making Copies
Other Features
■ Skyshot Mode
Skyshot allows copying a manuscript without generating dark borders even if the Platen Cover or ADF is opened.
Two types of Skyshot modes can be selected;
Digital Skyshot Mode : The scanning area (size) is not pre-determined.
Manual Skyshot Mode: The scanning area (size) is pre-registered into memory (M1 and M2) in advance.
■ Digital Skyshot Mode
Digital Skyshot allows the copying of a
manuscript without generating dark borders
even if the ADF or Platen Cover is open.
The default setting of Digital Skyshot Mode
is “NORMAL”. This default setting can be
changed in the Copier Settings.
(See page 49)
1
2
Open the ADF
or Platen Cover
NOTE
The default setting of Digital Skyshot Mode is “NORMAL”. In this
setting, the unit scans once. If there are black areas around the
borders in the copies, set the Digital Skyshot Mode to “QUALITY”
to soften the dark borders. In this setting, the unit scans twice.
OFF
: NONE
NORMAL : Default setting (usually select this mode).
QUALITY : For better definition, select the Quality mode.
■ Manual Skyshot Mode
Set the "08 Manual Skyshot Mode" in the
Copier Settings first. (See page 49)
NOTE
● When using the manual skyshot mode,
the M1 and M2 are turned On and
another job requiring memory cannot be
used.
● An incorrect position detection of the
original may occur when a strong light
shines onto the glass during the skyshot
mode.
38
1
From Platen
UpperLeft
Corner
A3
: A3
B4
: B4
A4
: A4
A4
: A4-R
A5
: A5
A5
: A5-R
Making Copies
3
NOTE
● An incorrect detection of the original may occur when a strong
light shines onto the glass during digital skyshot mode.
● Incorrect exposure may occur when there is a black line at
the edge of the original or an image which the machine
interprets as a black pattern in the digital skyshot mode.
Number of
Copies
(Max. 999)
2
3
Custom size∗
or
∗ Default M1/M2 size can be
changed by Function mode.
(See page 50)
Number of
Copies
(Max. 999)
39
Making Copies
Other Features
■ Job Build and SADF Mode
1
Special originals (like thin paper, etc.) can be
fed from the ADF Tray and copied continuously
using the Job Build and SADF Mode.
NOTE: Set the Copier Setting No. 12 (SADF
DEFAULT) to “OFF” position in
advance. (See page 51)
Thin paper: minimum 55 g/m2
2
For ADF
For i-ADF
Select desired settings
Place one Original at a
time or up to 50∗ sheets
(80 g/m2)
∗ 30 sheets/B4, A3
Example: To make 5 sets of sorted copies of
80 sheets of originals. (A4 size)
1
For ADF
2
50
80
1
For i-ADF
1
Select desired settings
Originals: 50 sheets
<1st scan>
80
Place the first 50
sheets of originals
on the ADF Tray.
51
1st and 2nd Scanned Data
are combined into one job.
Originals: Remaining
30 sheets <2nd scan>
5 sets of 80 sheets
sorted copies are
printed
■ Concurrent Copying
The next copy job can be reserved even if the
current copy job is not completed.
(Requires the optional Hard Disk Drive and
Image Memory (See page 59) to be installed)
1st job
1st job
2nd job
For ADF
Reserve
2
For i-ADF
Copy
NOTE
40
1
Select desired settings
2nd job
or
● Job Build and SADF function cannot be combined with 2
1 and 2
2.
● Concurrent Copying function cannot be used when the Job Build and SADF function is selected
to “ON” position in the Copier Setting No. 12 (SADF DEFAULT). (See page 51)
3
4
For ADF
Starts the printing
process.
Making Copies
For i-ADF
Place the next
original within 5
sec. of last ejected
original.
Number of
Copies
(Max. 999)
3
4
5
For ADF
Place the next original
within 5 sec. of last
ejected original.
(30 sheets)
For i-ADF
Select the Sort mode
Lights
Sort mode is
selected.
Number of
Copies
(Max. 999)
(ex. 5)
3
4
When starting the printing process:
Set the next copy job, repeat steps
1 to 3.
Next original(s) will be scanned.
Starts the printing process.
(ex. 5 sets of 80 sheet sorted copies)
5
When 1st copy job is
completed, next
original(s) will be
automatically printed.
● Next Jobs can be reserved up to
12 jobs.
Number of
Copies
(Max. 999)
Starts making a copy
41
Making Copies
Other Features
■ Interrupt Mode
This mode interrupts the
current running copy job and
allows other copy jobs to be
processed.
1
2
Other Job
For ADF
or
For i-ADF
(See pages 24-37)
■ Energy Saver (Power Saver Mode, Sleep/Shutdown Mode)
These modes save power while the machine is not in use.
Power Saver Mode
To enter
To exit
Automatically enters
the Power Saver
10
or Mode after
minutes∗ from
the last job.
Flashes :
Power Saver
Mode
or Any Key
Sleep/Shutdown Mode
To exit
Automatically enters the Sleep/
Shutdown Mode after 10 minutes∗
from the last job.
Lights :
Sleep/Shutdown
Mode
NOTE
∗ To adjust the default Sleep/
Shutdown Mode timer, see
page 46.
■ Job Memory
Two Copy Jobs can be stored in Memory
(M1 to M2) for recall at a later time.
To store a job in memory
1
2
Set up the copy
job to be stored.
(See pages 24-37)
or
42
4
Other Job is
completed
5
6
Making Copies
3
Power Consumption
Warm Up Time
Unavailable Functions
Standby
Modes
Approx. 120 W
—
————————
Power Saver
Approx. 19.5 W
Approx. 30 sec.
————————
Sleep
Approx. 9.5 W
Approx. 30 sec.
————————
Shutdown
Approx. 1.6 W
Approx. 30 sec.
• Printer Function
(Local USB and Network Connection)
• Internet Fax/Email Function
• Facsimile Function
(The LAN Cable may not be connected, or the
"DHCP DEFAULT" setting is set to "VALID") (See
page 47)
To recall a job stored in memory
1
2
3
or
or
When the original size is not shown on
the LCD display after selected M1 or
M2, select original size with the
Original Size Key.
NOTE
Number of
Copies
(Max. 999)
● JOB MEMORY mode will not be deleted even if the power switche is turned Off.
● When using the manual skyshot mode, the M1 and/or M2 are turned On and other job requiring
memory cannot be used.
43
Function
■ Using Function Modes to Change the Initial Machine Modes
Option
General
Settings
Copier
Settings
Printer
Settings
Fax/Email
Settings
Scanner
Settings
Input Key Operator Password (See page 13)
General
Settings for
Key Operator
Copier
Settings for
Key Operator
General Settings:
Printer
Settings for
Key Operator
Changing the Initial Machine Modes
● Power On Default Mode, Key Operator Mode, etc.
(See page 46)
For Key Operator:
Paper Size, Department Counter, Network TCP/IP
settings, etc.
(See pages 46 - 48)
■ Procedure
1
2
Select a desired setting by pressing keys.
Select a Function
: General Settings
COPY
: General/Copier
Settings
FAX/EMAIL : Fax/Email Settings
SCAN/FILE : Scanner Settings
PRINT
: Printer Settings
or
: Copier Settings
: Printer Settings
Scanner Settings (Scan
Parameters) (See page 64)
Fax/Email Settings
Refer to Operating Instructions
(For Facsimile and Internet Fax/
Email)
NOTE
44
● Please refer to the appropriate operating instructions manual for function settings on options.
● Function setting is accessible only when the machine is in Ready Mode.
● Fax/Email and Scanner Settings are only available when optional Network Scanner Module
and/or Fax Communication Board or Internet Fax/E-mail Module is installed. (See page 59)
Copier Settings:
Changing the Initial Copy Modes
● Default function of each copy mode.
(See pages 49 and 50)
For Key Operator:
Original mode, Contrast, etc.
(See pages 50 and 51)
Printer Settings:
Changing the Initial Printer Modes
Scanner Settings:
Function
● Default function of each print mode.
(See page 51)
For Key Operator:
Job completion time, Page protection, Error page print,
Spool function, PS configuration, Font list print, Mailbox
data handling, etc.
(See page 52)
● Normally, you do not need to set the Printer Settings.
Special Printer Settings may be required when printing
text data directly to the printer from the MS-DOS
command prompt.
Changing the Initial Scanner Modes
● Original mode, Compression mode, Resolution, etc.
(See page 53)
Fax/Email Settings:
Changing the Initial Fax/Email Modes
Refer to Operating Instructions (For Facsimile & Internet
Fax/Email).
3
4
Select a mode with the Cursor Key or
Keypad
or
Setting the desired Function
Parameter(s).
Select a setting with the
Keypad.
Confirm a setting with the
SET Key.
5
Exits this
Function
Mode
When selecting the Key Operator Mode:
(Ex: General Settings)
4
09 KEY OPERATOR MODE
ENTER PASSWORD=_
Input the Key
Operator
Password
(3-digit)
(See page 13)
6
5
Set the desired Function Parameter(s).
3
Select a mode with the Cursor Key or
Keypad.
Select a setting with the Keypad.
Confirm a setting with the SET Key.
Exits this
Function
Mode
45
Function
■ General Settings
No.
Modes
Function
Initial
Setting
00
POWER ON DEFAULT
Selects the default operation mode.
1:COPY / 2:PRINTER / 3:SCANNER
(SCANNER is option, see page 59)
1: COPY
01
SORT MEMORY USAGE
Selects whether to display the amount of sort
memory used on the control panel.
1:OFF / 2:DISPLAY
1: OFF
02
DEPT. COUNTER
Displays the Total Copy usage and copy limit of Consult your
the selected department.
authorized service
provider
03
SORT-ROTATE
Selects the rotate-sort mode.
1:OFF / 2:ON
(Available A4 size paper only)
09
KEY OPERATOR MODE
Inputs the key operator password.
ENTER PASSWORD =
1:OFF
NOTE: When inputting above General Settings mode No., no need to input the first "0", input only the second
number of the two digit display.
The following Parameter Settings require the input of the Key Operator Password:
■ General Settings (For Key Operator)
No.
46
Modes
Function
Initial
Setting
00
GENERAL LIST
Prints the general settings list, and meter count
readings.
PRESS SET TO PRINT
01
PAPER SIZE
Selects the Paper Tray and sets the Paper Size.
(See page 54)
1:TRAY-1 / 2:TRAY-2 / 3:TRAY-3 / 4:TRAY-4
(TRAY-2 to 4 are option)
A4 → A4
→ B5 →B5
→ A5 → A5
→ FLS1
→ FLS2
→ LEDGER
→
→ LETTER → LETTER
→
LEGAL
INVOICE
→A3
→B4
→
03
AUTO RESET TIME
Selects the Control Panel reset time.
3:1 min.
1:OFF / 2:30 sec / 3:1 min. / 4:2 min. / 5:3 min. /
6:4 min.
04
ENERGY SAVER MODE
Sets the Energy Saver mode and time.
1:INVALID / 2:POWER SAVER / 3:SLEEP /
4:SHUTDOWN
Power Saver mode timer: 1-240 min.
Sleep/Shutdown mode timer: 1-240 min.
05
ENERGY SAVER TIME
Sets the Energy Saver Timer (power saver mode). Start00:00
Start (ON) : 00:00 End (OFF) : 00:00
End00:00
Input the Start and End time with Cursor Keys
and Keypad. Once you set the Power Saver
ON/OFF timer, set the timer repeats everyday.
06
LANGUAGE DEFAULT
Selects the default message language for the
display.
07
SPECIAL TRAY 1
Selects the paper tray to use for special paper.
1:NONE / 2:TRAY-1 / 3:TRAY-2 / 4:TRAY-3 /
5:TRAY-4 / 6:BYPASS
(TRAY-2 to 4 are options, see page 59)
3:SLEEP
10 min.
1:NONE
<to be continued>
■ General Settings (For Key Operator) (Continued)
Modes
Function
Initial
Setting
08
SPECIAL TRAY 2
Selects the paper tray to use for special paper.
1:NONE / 2:TRAY-1 / 3:TRAY-2 / 4:TRAY-3 /
5:TRAY-4 / 6:BYPASS
(Only available when optional TRAY-2 and 3/4
are installed. See page 59)
1:NONE
09
KEY/TOUCH BEEP
Selects the default key sound level.
1:OFF / 2:SOFT / 3:LOUD
2:SOFT
10
BYPASS SET BEEP
Selects whether to sound a Beep when paper is 1:INVALID
set on the Sheet Bypass.
1:INVALID / 2:VALID
11
ORIG.SET BEEP ADF
Selects whether to sound a Beep when paper is 2:VALID
placed on the ADF.
1:INVALID / 2:VALID
12
PAPER OUT ROTATE
Machine will automatically rotate the image to
1:OFF
accommodate the orientation of the paper in another
Tray and print when the selected Tray is empty.
1:OFF / 2:ON
13
DEPT. COUNTER MODE
Monitors the copy usage of each department.
1:TOTAL COUNTER
2:DEPT. COUNTER
3:DEPT. COUNTER LIST
17
DATE & TIME
Sets the date and time.
(Day, Month, Year, Time)
Input the date and time with Cursor Keys and
Keypad.
19
IP ADDRESS (DHCP)*1,*2
Displays the IP Address which was reserved by
DHCP server.
20
SUBNET MASK(DHCP)*1,*2
Displays the Subnet Mask Address which was
reserved by DHCP server.
21
DEF. G/W IP(DHCP)*1,*2
Displays the Gateway IP Address which was
reserved by DHCP server.
22
DHCP DEFAULT∗3
Selects whether to enable the DHCP.
1:INVALID / 2:VALID
23
DNS SERVER ADDR.∗2
Selects whether to enable the DNS Server, and 2:VALID
sets its settings for Internet Fax/Email Function.
1:INVALID
2:VALID
<Sub Function>
1:HOST NAME / 2:DOMAIN NAME /
3:PRI. DNS SERVER (IP ADDRESS1) /
4:SEC. DNS SERVER (IP ADDRESS2)
24
MAC ADDRESS
Indicates the MAC address.
Function
No.
Consult your
authorized
service provider
2:VALID
<to be continued>
NOTE
∗1 When setting other than DHCP server Network settings, Parameter No. “22 DHCP DEFAULT” should be set to “INVALID”
first, then setup Parameters No.19 to 21.
∗2 When Parameters No. 19 to 23 (except 22) and No. 23 are set, cycle the power by turning the Power Switch on the Right
Side of the machine OFF and ON.
∗3 When not connecting to LAN, the DHCP setting should be in the OFF position. When the DHCP setting is on ON, and the
machine is in the Shutdown Mode, Fax reception will not be accepted.
47
Function
■ General Settings (For Key Operator) (Continued)
No.
Initial
Setting
Function
25
HARD DISK FORMAT∗1
Formats the hard disk.
PRESS SET TO START
26
HARD DISK ERR CHK∗1
Selects the provision for the hard disk error check.
PRESS SET TO START
27
ABBR GROUP ID
Inputs the Group ID for the address book.
0-99
0
28
COMMUNITY NAME(1)∗2
Selects whether to change the Community
Name(1) SNMP.
Enable read only
public
29
COMMUNITY NAME(2)∗2
Selects whether to change the Community
Name(2) SNMP.
Enable read/write
public
30
DEVICE NAME∗2
Inputs the device name when required.
(For Status Monitor/EtherTalk Machine Name)
31
DEVICE LOCATION∗2
Inputs the device name when required.
(For Status Monitor)
NOTE
48
Modes
∗1
∗2
Available only when the optional Hard Disk Drive Unit is installed.
When Parameters No. 28 to 31 are set, cycle the power by turning the Power Switch on the Right Side of the
machine OFF and ON.
■ Copier Settings
No.
Modes
Initial
Setting
Function
MARGIN DEFAULT
Selects the margin shift value.
1:LEFT
1:POSITION / 2:VALUE
10 mm
<Sub-Function>
1:LEFT / 2:RIGHT / 3:TOP / 4:BOTTOM
Procedure:
Select "1:POSITION" and select a Margin
position then, select "2:VALUE" and input a shift
value with Keypad.
01
EDGE DEFAULT
Selects the edge width.
1:EQUAL RATE (X & Y) / 2:INDIVIDUAL
Procedure:
Select "1:EQUAL RATE (X & Y) " or
"2:INDIVIDUAL" then, input a edge value with
Keypad.
EQUAL RATE (X & Y): same edge value
INDIVIDUAL: different edge values (X and Y)
1:EQUAL RATE
5 mm
02
BOOK MARGIN DEF.
Selects the book void width.
5 - 99 mm
20 mm
03
FRAME MARGIN
Select whether to set the frame margin.
1:INVALID / 2:VALID
1:INVALID
04
2-SIDED MODE DEF.
Selects the default duplex priority mode.
1:OFF / 2:1→2 / 3:2→2 / 4:BOOK→2
1:OFF
05
N in 1 DEF.
Selects the N in 1 default mode.
Procedure: Select a Function
(ex: ORIENTATION) then, select
a Sub-Function (ex: PORTRAIT)
1:ORIENTATION
Select from the following original sizes:
), A4 ( ), A4-R ( ),
A3 ( ), B4 (
A5 ( ) or A5-R ( ).
<Sub-Function>
1:PORTRAIT / 2:L-SCAPE
2:LAYOUT
<Sub-Function>
1:2 in 1 / 2:4 in 1
<Sub-Function: 2in1>
1:L→R / 2:R→L
<Sub-Function: 4in1>
1: 1 2 / 2: 1 3 / 3: 2 1 / 4: 3 1
1:ORIENTATION
<Sub-Function>
For A3/B4/A4-R/
A5-R
2:L-SCAPE
For A4/A5
1:PORTRAIT
2:LAYOUT
<Sub-Function>
1:2 in 1
<Sub-Function>
1:L→R
3 4
2 4
4 3
Function
00
4 2
06
N in 1 WITH FRAME
Selects whether to enable the edge deletion.
1:INVALID / 2:VALID
1:INVALID
07
DIGITAL SKYSHOT
Selects the default digital skyshot mode.
1:OFF / 2:NORMAL / 3:QUALITY
2:NORMAL
08
MANUAL SKYSHOT
Selects whether to enable the Manual Skyshot.
1:OFF / 2:M1 ON / 3:M2 ON / 4:M1,M2 ON
1:OFF
09
AUTO EXPOSURE
Selects whether the auto exposure is enabled.
1:INVALID / 2:VALID
2:VALID
10
SORT PRIORITY ADF
Selects the sort priority when using the ADF.
1:NON-SORT / 2:SORT
2:SORT
<to be continued>
49
Function
■ Copier Settings (Continued)
No.
Modes
Initial
Setting
Function
11
SORT PRIOR. GLASS
Selects the sort priority when using the Platen.
1:NON-SORT / 2:SORT
1:NON-SORT
12
1→2 BINDING DEF.
Selects the binding location for 1→2 Copy.
1:LONG EDGE / 2:SHORT EDGE
1:LONG EDGE
13
2→1 BINDING DEF.
Selects the binding location for 2→1 Copy.
1:LONG EDGE / 2:SHORT EDGE
1:LONG EDGE
14
BOOK → 2 DEFAULT
Selects the page layout of the Book→2 copy.
1:BOOK FORMAT
<Sub-Function>
1:FACING / 2:FLIPPING
2:PAGE ORDER
<Sub-Function>
1:L→R / 2:R→L
1:BOOK FORMAT
2:FLIPPING
2:PAGE ORDER
1:L→R
15
IMAG. REPEAT DOT.
Selects whether to print the dotted line.
1:NONE / 2:PRINT
2:PRINT
16
2 PAGE MODE DEF.
Selects the page order of 2 page copy.
1:L→R / 2:R→L
1:L→R
19
KEY OPERATOR MODE
Inputs the key operator password.
ENTER PASSWORD =
The following Parameter Settings require the input of the Key Operator Password:
■ Copier Settings (For Key Operator)
No.
50
Modes
Initial
Setting
Function
00
COPY SETTING LIST
Prints the copier settings list.
PRESS SET TO PRINT
01
ORIGINAL
Selects the halftone default setting.
1:TEXT / 2:TEXT/PHOTO / 3:PHOTO
02
TEXT CONTRAST
Selects the default contrast setting for the Text mode. 3
1-5
03
T/P CONTRAST
Selects the default contrast setting for the Text/Photo 3
mode.
1-5
04
PHOTO CONTRAST
Selects the default contrast setting for the Photo mode. 3
1-5
05
MAX. COPY SETTING
Select the maximum number of copies allowed per job. 999
1-999
06
M1,SIZE
Inputs the frequently used size in job memory 1. 70 x 160 mm
Procedure:
Input X size (5 - 432) and press SET Key then,
input Y size (5 - 297) with Keypad.
07
M2,SIZE
Inputs the frequently used size in job memory 2. 95 x 220 mm
Procedure:
Input X size (5 - 432) and press SET Key then,
input Y size (5 - 297) with Keypad.
08
MEM. FULL ACTION
Selects the action to take during memory full condition. 1:PRINT
1:PRINT / 2:CANCEL
09
TONER SAVE (TEXT)
Selects the Toner Save Level to use for the Text mode. 1:NONE
1:NONE / 2:LEVEL1 / 3:LEVEL2
2:TEXT/PHOTO
No.
Modes
Initial
Setting
Function
10
TONER SAVE (T/P)
Selects the Toner Save Level to use for the
Text/Photo mode.
1:NONE / 2:LEVEL1 / 3:LEVEL2
1:NONE
11
TONER SAVE (PHOTO)
Selects the Toner Save Level to use for the
Photo mode.
1:NONE / 2:LEVEL1 / 3:LEVEL2
1:NONE
12
SADF DEFAULT
Selects whether the Job Build and SADF Mode
is enabled.
1:OFF / 2:ON
1:OFF
■ Printer Settings
Modes
Initial
Setting
Function
00
NUMBER OF PRINTS
Sets the default number of prints.
1-999
1
01
PAPER SIZE
Sets the default paper size setting.
A3 / B4 / A4 / B5 / A5 / LEDGER / LEGAL /
LETTER / INVOICE / FLS1 / FLS2
A4
02
PAPER TRAY
Sets the default Paper Tray selection.
Auto
Auto / BYPASS / TRAY-1 / TRAY-2 / TRAY-3 / TRAY-4
03
PRINT DIRECTION
Sets the default print orientation setting.
1:PORTRAIT / 2:L-SCAPE
04
PRINT DATA
Determines the provision of the print data.
PRESS SET TO PRINT
05
2-SIDED PRINT
Selects whether the 2-Sided print setting is
enabled.
1:OFF / 2:ON
1:OFF
06
BIND POSITION
Sets the default bind position.
1:LONG EDGE / 2:SHORT EDGE
1:LONG EDGE
07
RESOLUTION
Sets the default resolution setting.
1:300dpi / 2:600dpi / 3:1200dpi
2:600dpi
08
FONT (PCL)∗1
Sets the default PCL font.
0-99
0
09
SYMBOL TABLE (PCL)∗1
Sets the default PCL symbol table.
0-35
11
10
PITCH (PCL)∗1
Sets the default PCL pitch.
0.44-99.99
10.00
11
POINT SIZE (PCL)∗1
Sets the default PCL point size.
4.00-999.75
12.00
12
LINES/PAGE (PCL)∗1
Sets the default PCL lines/page.
5-128
60
13
RETURN CHARACTER (PCL)∗1
Sets the default PCL return character.
1:CR / 2:CR+LF
1:CR
14
MUTUAL A4/LETTER
Selects whether the mutual size A4/LETTER is
enabled.
1:OFF / 2:ON
1:OFF
15
MAILBOX MEMORY∗2
Indicates the mailbox memory status.
PRESS SET TO SELECT
19
KEY OPERATOR MODE
Inputs the key operator password.
ENTER PASSWORD =
∗1 Available only when the optional Printer Controller Module is installed.
∗2 Available only when the optional Hard Disk Drive Unit is installed.
Function
No.
1:PORTRAIT
51
Function
The following Parameter Settings require the input of the Key Operator Password:
■ Printer Settings (For Key Operator)
No.
Modes
Initial
Setting
Function
00
PRINTER SETTINGS
Prints the printer settings.
PRESS SET TO PRINT
01
COMPLETION TIME
Sets the job completion time setting.
1-999SEC
02
PAGE PROTECTION
Selects whether to enable automatic
1:OFF
compression when the received data exceeds
the page memory capacity.
(This is accomplished by reducing resolution,
and/or deleting pixels to fit the data onto the
available page memory, then print it out.)
When the setting is in the "OFF" position, upon
exceeding the page memory capacity, the print
job is deleted and an Error message is displayed.
1:OFF / 2:ON
03
ERROR PAGE PRINT
Selects whether to print the error page.
1:OFF / 2:ON
2:ON
04
SPOOL FUNCTION
Selects whether to enable the spool function.
1:OFF / 2:ON
2:ON
05
TEXT PRINT
Selects whether to print the text page only.
1:OFF / 2:ON
2:ON
06
PS CONFIGURATION∗1
Prints the PS configuration page.
PRESS SET TO PRINT
07
FONT LIST PRINT (PCL)∗2
Prints the PCL font list.
PRESS SET TO PRINT
08
FONT LIST PRINT (PS)∗1
Prints the PS font list.
PRESS SET TO PRINT
09
MAILBOX DATA HOLD∗3
Selects the automatic holding time frame for the 7 DAYS
mailbox data.
Infinity / 1 DAY / 2 DAYS / 3 DAYS / 4 DAYS /
5 DAYS / 6 DAYS / 7 DAYS
10
DELETE MAILBOX∗3
Selects whether to delete All the mailbox data or
only the data Before the time frame selected in
the "09 Mailbox Data Hold" setting.
1:ALL / 2:BEFORE
11
PRINT QUEUE DEL
Selects whether to disable the Key Operator's
Password (authorization) requirement to delete
the print queue.
1:FREE / 2:KEY OP. (Operator)
12
APPLETALK ZONE∗1
Inputs a AppleTalk zone name.
180SEC
2:KEY OP.
∗1 Available only when the optional Multi Page Description Language Controller Module is installed.
∗2 Available only when the optional Printer Controller Module is installed.
∗3 Available only when the optional Hard Disk Drive Unit is installed.
52
■ Scanner Settings (Scan Parameters)
Modes
Function
Initial
Setting
00
SCANNER SETTINGS
Prints the scanner settings.
PRESS SET TO PRINT
01
ORIGINAL MODE
Selects the default Halftone setting for the
originals.
1:TEXT / 2:TEXT/PHOTO / 3:PHOTO
2:TEXT/PHOTO
02
COMPRESSION MODE
Selects the default compression mode setting.
1:MH / 2:MR / 3:MMR / 4:JBIG
4:JBIG
03
RESOLUTION
Sets the default resolution setting.
1:STANDARD / 2:FINE / 3:S-FINE
3:S-FINE
04
BIND POSITION
Selects the default bind position of 2-Sided
original.∗1 (See below)
1:LONG EDGE / 2:SHORT EDGE
1:LONG EDGE
05
FILE TYPE/NAME
Selects the default File Type format.
1:TIFF / 2:PDF
1:TIFF
06
CHANGE KEYBOARD
Selects the Keyboard Type when the One Touch 1:QWERTY
Sheet is changed on the Keyboard∗2
1:QWERTY / 2:QWERTZ / 3:AZERTY
∗1
∗2
When scanning the 2-Sided original, use the optional i-ADF.
When the optional Keyboard (DA-KB180) is installed.
<Bind Position of 2-Sided Original>
Long Edge
Short Edge
53
Function
No.
Function
For Example
■ Changing the Paper Size (Paper Tray)
The Paper Trays are designed to accommodate A5, A4, and B4 Size paper.
1
2
3
FUNCTION MODE (1-2)
ENTER NO. OR ∨ ^
1:GENERAL SETTINGS
PRESS SET TO SELECT
or
1: General Settings
Select a Paper Tray
6
KEY OPR.MODE (00-31)
ENTER NO. OR ∨ ^
7
01 PAPER SIZE
1:TRAY-1[A4
8
]
or
1:TRAY-1
2:TRAY-2
3:TRAY-3
4:TRAY-4
NOTE: TRAY-2, 3, 4 are options
(See page 59)
01 PAPER SIZE
12
Paper Tray
13
14
Paper Guide B
ex. Paper Tray-1
Paper Guide B Adjustment
Paper Guide A
Paper Guide A Length Adjustment
NOTE
It is recommended that the paper guide B is fixed in place with a screw,
consult your authorized service provider for details on how to fasten the
guide.
54
4
5
GENERAL PARAM. (0-9)
ENTER NO. OR ∨ ^
09 KEY OPERATOR MODE
ENTER PASSWORD=_
6
or
3-digit
(See page 13)
9 (09 KEY OPERATOR MODE)
9
10
TRAY-1
A4
11
When setting another Paper
Tray, repeat steps [7] - [9]
∨ ^
Select a
Paper Size
15
Paper Tray
Function
12
A4
A5
LETTER
A4
FLS1
LETTER
B5
FLS2
INVOICE
B5
LEDGER
A3
A5
LEGAL
B4
Change the Paper Size Indicator
55
Function
For Example
■ Department Counter
The Department Counter feature can limit the number of copies, administer counters and Identification Code numbers
for each department. (Maximum Number of Departments: 300)
Contact your authorized service provider to enable the Department Counter feature.
1
2
3
FUNCTION MODE (1-2)
ENTER NO. OR ∨ ^
or
1: General Settings
6
7
KEY OPR. MODE (00-31)
ENTER NO. OR ∨ ^
13 DEPT. COUNTER MODE
1: TOTAL COUNTER
or
13 DEPT. COUNTER MODE
10
For Department Counter
For Maximum Copies
DEPT. COUNTER
001:123145
MAX COPIES
001:12345678
When the Parameter “22 DHCP DEFAULT” is set to
“INVALID”, the Key Operator must administer the
Network settings manually.
Enter these required Network Setting: “19 TCP/IP
ADDRESS”, “20 TCP/IP SUBNET MSK” and “21 TCP/
IP G/W ADDR.”, in the same manner as shown in the
following example.
6
56
19 TCP/IP ADDRESS
ID CODE
001:12345678
Maximum
number of
Copies (8-digit)
Clear the
counter to "0".
■ Network Settings
For ID (Identification) Code
1
19 TCP/IP ADDRESS
192.168.1.100
Input the TCP/IP Address
Ex.: 192.168.1.100
Use the “ ” key to enter a
period.
1 → 9 → 2 →
→ 1 → 6 → 8 →
→ 1 → → 1 → 0 → 0
ID Code
(1 to 8-digit)
2
Same procedure as
steps 2 to 5 above.
7
20 TCP/IP SUBNET MSK
Input the Subnet Mask same
procedure as in step 6.
4
5
GENERAL PARAM. (0-9)
ENTER NO. OR ∨ ^
09 KEY OPERATOR MODE
ENTER PASSWORD=
6
or
3-digit
(See page 13)
9 (09 KEY OPERATOR MODE)
8
DEPT. CODE (1-300)
ENTER NO. OR ∨ ^
9
DEPT. COUNTER
001:123450 MAX COPIES
001:123456 ID CODE
SET
001:0123
Function
SET
SET
DEPT. COUNTER
002:123500 MAX COPIES
002:125000 ID CODE
SET
002:45678
Department
No (01-50)
11
SET
Next Department
10
or
3
KEY OPR. MODE (00-31)
ENTER NO. OR ∨ ^
4
22 DHCP DEFAULT
2:VALID
5
Select “19 TCP/IP ADDRESS”
:INVALID
or
6
(4 times)
22 DHCP DEFAULT
8
21 TCP/IP G/W ADDR.
Input the Gateway
Address same procedure
as in step 6.
9
10
Turn the Power Switch
on the Right Side of the
machine OFF and ON.
57
Function
Combined Function Table
1
2
2
1∗
2
2∗
Book
2
2 Page
N in 1
Sort/Rotate-Sort
Non-Sort
Zoom
Edge
Book
Margin
Image Repeat
Centering
Interrupt
Manual Skyshot
Digital Skyshot
Double Exposure
: Possible Combined Functions.
: Unavailable Combined Functions.
A : Next Selection is Carried Out.
R : When the same function is selected twice, the second selection is ignored.
: Functional combination that cannot be performed.
NOTE:
58
∗ While making copies with the 2
1 or 2
Interrupt mode cannot be selected.
2 Copy using the optional ADF (DA-AS181), the
Double Exposure
Digital Skyshot
Manual Skyshot
Interrupt∗
Centering
Image Repeat
Margin
Book
Edge
Zoom
Non-Sort
Sort/Rotate-Sort
N in 1
2
2
2 Page
1
2
Book
2
First
Selections
1
2
Next
Selections
Accessories
Components
■ The DP-1520P/1820P/1820E is a digital photocopier which can produce images with great clarity.
Furthermore, its copying functionality can also be greatly enhanced by the addition of the following options and
supplies.
We hope you find that the wide ranging capabilities will make your office-place more productive and efficient.
■ Options
Image Memory
(DA-SM16B/64B/28B)
● 16/64/128 MB
● To increase the memory capacity for electronic
sorting.
ADF
(DA-AS181)
i-ADF
(DA-AR202)
● Duplexing
● For DP-1820E only
Hard Disk Drive (HDD) Unit
(DA-HD18)
● This option also requires at least 16 MB of
optional Sorting Image Memory (DA-SM16B)
● For PS Printing (for Fonts),
Security Print/Mailbox,
Account Management
For DP-1820P/1820E only:
For Concurrent Copy, Electronic Sorting
Memory, PS/PCL Print Job Spooling
Keyboard
(DA-KB180)
● For Fax/E-Mail,
Network Scanner
Function
(For DP-1820P/1820E
only)
Network Scanner Module
(DA-NS180)
(For DP-1820P/1820E only)
2nd/4th Paper
Tray
(DA-DS184)
4th: For DP-1820P/
1820E only
3rd Paper Tray
(DA-DS185)
(For DP-1820P/
1820E only)
Accessories
Expansion Board
(DA-EM600)
● Expansion F-ROM (8 MB)
Printer Controller Module
(DA-PC180)
● Printer Controller for PCL6∗
Fax Communication Board
(DA-FG180)
(For DP-1820P/1820E only)
Multi Page Description Language
Controller Module
(DA-MC180)
● Printer Controller for PS∗/PCL6
Internet Fax/E-Mail Module
(DA-NF180)
(For DP-1820P/1820E only)
■ Supplies
Part Name
Part No.
Remarks
Toner
DQ-TU10J
Toner
Verification Stamp
DZHT000004
X-Stamp for Fax Option
NOTE
∗ PCL6 is a Page Description Language of the Hewlett-Packard Company.
PS is a Page Description Language of the Adobe Cooperation.
● Contact your authorized service provider for details on options combination.
59
Network Scanner (Option)
Document Scanning
■ Document Scanning
When Panasonic Document Management System
(Panasonic-DMS) is installed and configured on your
PC, document(s) can be scanned from the the
machine to your PC.
Direct Connection
(with Crossover Cable, see page 66)
● Document Scanning directly from the Machine to
your PC using Windows “My Network Places” or
“Network Neighborhood”.
NOTE:
USB Port is used for printing only, and is not
available for local scanning.
NOTE
If the PC's address (IP address) is not shown on
the LCD of the machine, register the PC's address
from the Control Panel of the machine. (See page
62)
● ONE-TOUCH or ABBR No.
1
2
For ADF
For i-ADF∗1
Original Size
(From Platen only)
or
∗1 When scanning the 2-
Sided original, use the
optional i-ADF.
A3
: A3
B4
: B4
A4
: A4
A4
: A4-R
A5
: A5
A5
: A5-R
● When entering letter(s), use either of the
following methods.
With Keypad
ex. SALES
S
A
L
E
S
x4
x1
x3
x2
x4
When selecting the scanning resolution/contrast:
∗2 When scanning the 2Sided original, select
bind position of
original.
(See page 27)
ex. ABC
A
B
C
x1
x2
x3
2-Sided
Original∗2
With Keyboard
When optional Keyboard (DA-KB180) is
installed:
When inputting a special
character, press "_/()···" Key and
use the ( / ) Cursor Keys to
select a character.
4
SCANNING DOCUMENT
PAGES=001
00%
S-FINE : 600 x 600 dpi
FINE : 300 x 300 dpi
When the TEXT mode is
selected as follows and
S-FINE and FINE are not
selected : 150 x 150 dpi
Select type of Original(s)
PHOTO
: Mainly Photo
TEXT/PHOTO : Text and Photo
combined
TEXT
: Mainly Text
Adjust the Manual Exposure
Press DARKER or LIGHTER
Key (5 steps)
When adding a file name or selecting a compression format.
(See page 64)
When using ADF/i-ADF
• Skip to step 8
5
From Platen only
ANOTHER ORIGINAL?
1:YES 2:NO
or
1: YES
Go to next step
2: NO
Skip to step 8
60
Next Original
Select a Station (PC's Address)
3-1
ABBR
3-2
3-3
4
ABBR No.
(2-digit)
ABBR [_ ]
ENTER ABBR No.
DIRECTORY
SEARCH
3-1
[01]SALES
10.74.252.66
3-2
SCANNING DOCUMENT
PAGES=001
01%
3-3
4
Enter letter(s)
ENTER LETTER(S)
_
ENTER LETTER(S)
SA_
ONETOUCH*
[06]SALES_3
[05]SALES_2
10.74.252.66
[01]SALES
10.74.252.66
10.74.252.66
3-1
3-2
NOTE
"ONE-TOUCH" is
available when the
optional Keyboard (DAKB180) is installed.
4
Network Scanner
(Option)
3
Keyboard (Option)
<10>PANA
10.74.252.63
6
PRESS START
A4
7
8
ANOTHER ORIGINAL?
1:YES 2:NO
1:YES
Continues to scan another
original(s), repeat steps 5
and 6.
2:NO
No next original.
DATA IS BEING
TRANSFERRED TO PC
TRANSFER COMPLETED
61
Network Scanner (Option)
Address Book
■ Adding your PC's IP Address
If the Scanner Configuration is not set with the Panasonic Communications Utility of Panasonic-DMS software (refer
to Panasonic-DMS CD-ROM), input your PC's IP Address using the machine's Keyboard.
1
2
3
02-APR-2004 04:28
READY TO SCAN
FUNCTION
(1-2)
ENTER NO. OR ∨ ^
or
1: SET MODE
7
8
1:ONE-TOUCH
2:ABBR No.
For ONE-TOUCH
9
ONE-TOUCH< >
PRESS ONE-TCH OR ∨ ^
IP ADDRESS
<01>
: ONE-TOUCH
One-Touch Key
or
: ABBR No.
NOTE
"ONE-TOUCH" is available when
the optional Keyboard (DA-KB180)
is installed.
For ABBR No.
ABBR [_ ]
ENTER NO. OR ∨ ^
ex. 10.74.252.66
7 4
1 0
5 2
6
ABBR No.
2
6
When changing a number, move the
cursor ( ) over the number you wish
to change and overwrite it with a
New number.
■ Editing/Erasing your PC's IP Address
If you have to change or erase any of the Address Book stations, follow the steps below.
1
2 Editing
Follow the same procedures as steps 1 to 8
IP ADDRESS
<01>
10.74.252.66
above, “Adding your PC's IP Address”.
To change the address,
move the cursor ( ) over the
number you wish to change and
overwrite it with a New number.
2
Erasing
IP ADDRESS
10.74.252.66
62
<01>
4
1:SET MODE ?
PRESS SET TO SELECT
5
6
SET MODE
(1-2)
ENTER NO. OR ∨ ^
1:ADDRESS BOOK ?
PRESS SET TO SELECT
7
10
11
Enter Station Name
(See page 60)
PORT NUMBER
6509
: PC
<01>
(Max. 40 characters)
FTP: Consult with your network
When inputting a special character,
administrator.
press "_/()..." Key and use the ( / )
Cursor Keys to select a character.
When changing the inputted character, move cursor ( ) back to the
character and press the CLEAR Key then input a new character.
3
4
5
DESTINATION : PC
1:PC 2:FTP
When continuously registering
ONE-TOUCH/ABBR No.,
repeat steps 8 to 12- .
Network Scanner
(Option)
STATION NAME
SALES
12
DESTINATION : PC
1:PC 2:FTP
PORT NUMBER
6509
Enter a new Station
Name
(See page 60)
: PC
STATION NAME
SALES 01
<01>
(Max. 40 characters)
3
IP ADDRESS
_
<01>
or
: FTP
FTP: Consult with your network
administrator.
63
Network Scanner (Option)
Function
■ Scan Parameters
1
2
3
02-APR-2004 04:28
READY TO SCAN
FUNCTION
(1-2)
ENTER NO. OR ∨ ^
or
1: SET MODE
7
SCAN PARAM
(0-6)
ENTER NO. OR ∨ ^
Refer to Function settings on page 53.
● Prints Scanner Settings List,
Sets Original Mode,
Sets Compression Mode,
Sets Resolution,
Sets Bind Position,
Sets File Type/Name
or
■ Select Mode
When adding a file name or selecting a compression format before scanning document(s).
1
2
3
02-APR-2004 04:28
READY TO SCAN
FUNCTION
(1-2)
ENTER NO. OR ∨ ^
or
2: SELECT
MODE
For Scan File Name
6
1:SCAN FILE NAME ?
PRESS SET TO SELECT
7
8
FILE TYPE=TIFF
1:TIFF 2:PDF
FILE NAME=DATE&TIME
1:DATE&TIME 2:CUSTOM
: TIFF
or
or
: PDF
For Compression
6
64
2:COMPRESSION ?
PRESS SET TO SELECT
7
COMPRESSION : JBIG
3:MMR 4:JBIG
: MH
: MMR
: MR
: JBIG
4
1:SET MODE ?
PRESS SET TO SELECT
5
6
SET MODE
(1-2)
ENTER NO. OR ∨ ^
2:SCAN PARAMETERS ?
PRESS SET TO SELECT
7
2:SELECT MODE?
PRESS SET TO SELECT
5
SELECT MODE
(1-2)
ENTER NO. OR ∨ ^
6
: Scan File Name
or
: Compression
Network Scanner
(Option)
4
(When Selecting Custom)
SCAN FILE NAME
ENTER NAME
Enter a File Name
(See page 60)
65
Network Scanner (Option)
Direct Connection (with Crossover Cable)
■ Direct Connection (with Crossover Cable)
1
2 Connect a Crossover LAN Cable between your machine
and the PC.
Turn OFF* the Power
Switch (Machine and the
PC).
LAN Cable
(Crossover)
To PC
LAN Cable (Crossover)
To Machine
(Right Side of Machine)
(Rear Side of PC)
NOTE: Do not use Standard
LAN Cable.
5
Turn OFF* and ON the
Power Switch (Machine
and the PC).
6
7
Input your PC's IP
Address into the Address
Book in the machine (see
page 62) or into the
Panasonic-DMS software
(refer to the enclosed CD).
Scan the document(s) to
your PC. (See page 60)
NOTE:
*If the Hard Disk Drive Unit (DA-HD18) is installed, see page 13.
66
3
4
Turn On the Power Switch
(Machine and the PC).
Input the Network Address
(Machine and your PC).
● IP and Gateway Address
IP:
192.168.0.1 (Machine)
192.168.0.2 (Your PC)
Subnet Mask: 255.255.255.0
(Machine & the PC)
● How to input the network address:
For your Machine: See page 56
For your PC:
See below
5
For more detailed information, refer to Windows OS operating instructions manual.
For Windows 2000
5
3
4
1 Right click "My Network
Places" and select
"Properties".
2 Right click "Local Area
Connection" and select
"Properties".
7
6
3 Select "Internet
5 Select "Use the
Protocol (TCP/ IP)".
4 Click "Properties".
7 Click "OK".
following IP address"
then, Input IP Address
and the Subnet Mask.
6 Click "OK".
Network Scanner
(Option)
For Windows XP
2
4
3
1 Open the Control Panel.
2 Select "Switch to Classic
5
4 Right click "Local Area
View", if using the
Category View Mode.
Connection Enabled ........"
and select "Properties".
3 Select "Network
Connections".
7
5 Select "Internet
5
7 Select "Use the
Protocol (TCP/ IP)".
6
following IP address"
then, Input IP Address
and the Subnet Mask.
6 Click "Properties".
9 Click "CLOSE".
9
8
8 Click "OK".
"OK" will be changed to "CLOSE".
67
Problem Solving
Troubleshooting
Check
Action
Unit Does Not Operate
Does the display light?
Check if the Power Switch (Main Power Switch
on the Right Side of the machine) is turned ON
and if the power cord is plugged into the AC
outlet.
Does the Energy Saver key flash (or light)
and the display is turned OFF?
(See page 42)
Press Energy Saver key on the control panel.
Does any of the U## codes and messages
appear on the display?
(U01, U07, U13, U14....etc.)
Perform actions in accordance with each
message.
Does the Add Paper indicator and message
appear on the display?
Add paper. (See page 14)
Does the Misfed Paper indicator, message
and J## codes appear on the display?
Remove the misfed paper. (See pages 16 - 21)
Does E#-## codes and messages appear on
the display?
Turn the Power Switch on the Right Side of the
machine to the OFF and ON position. If the
error code does not clear, call your Service
provider.
The machine would not accept the next job
during operation, instructed job would not be
accepted for a long time period or job would
not be completed.
Turn the Power Switch on the Right Side of the
machine to the OFF and ON position.
Light Copies
68
Does the exposure indicator say “LIGHTER”?
Press the “DARKER” button.
Does the Add Toner indicator and message
appear on the display?
Replace the Toner Bottle.
(See pages 16, 17)
Check
Action
Marked Copies
Is the machine’s Platen Glass or Platen Sheet
dirty?
Clean the Platen Glass or Sheet.
Is the original an OHP film or a dark original?
Cover the original with a sheet of white paper
before copying or lighten the exposure setting.
Clean the Corona Wire of the Drum Unit.
(See page 16)
Check the copies.
If a dark vertical line is remained, repeat
above step to clean the Corona Wire
became dark vertical line is erased.
If a dark verical line of
2-3cm in width is printed.
■ If the measures outlined above do not solve the problem, call your Service provider.
Adjusting the Double Feed Switch (For DA-AS181)
■ When original(s) do not feed correctly, adjust the position of
the Double Feed Switch as follows:
Position of
Switch
Normal Operation
Original does not feed.
Several originals are fed
at one time
Double Feed Switch
Machine Care
Platen Sheet
Platen Glass/Platen Sheet
Wipe marks off with a cloth and a neutral detergent.
Wipe again with a dry cloth.
Problem Solving
■ As a rule, clean weekly.
Platen (Glass)
69
Problem Solving
Replacing the Battery/Set the Date and Time
The machine has an internal battery
(Product No.: CR2032) which maintains
the date and time.
In the event the battery requires
replacement, the following message will
be displayed.
REPLACE BATTERY
1
2
Battery Holder
Turn the Power Switch on the
Right Side of the machine to the
OFF position.
If the Hard Disk Drive Unit
(DA-HD18) is installed, see
page 13)
U90
Remove 1 Screw.
Remove the Battery Holder.
CAUTION
Keep button batteries and small parts out of reach of children to
prevent choking or poisoning. If a button battery is swallowed
accidentally, get medical treatment immediately.
Set the Date and Time continues steps 6 to 13.
When setting the Date and Time, start
from step 6.
6
10
09 KEY OPERATOR MODE
ENTER PASSWORD=_
11
KEY OPR.MODE (00-31)
ENTER NO. OR ∨ ^
or
3-digit
(See page 13)
17 DATE & TIME
NOTE
70
● The service life of the battery is approximately 1 year under normal use.
3
4
New
Battery Holder
5
Turn the Power Switch
on the Right Side of
the machine to the ON
position.
Used
“+” side of battery should be
up side.
(Observe the polarity, see
CAUTION! below)
7
FUNCTION MODE (1-2)
ENTER NO. OR ∨ ^
6
Re-install the Battery Holder.
Install 1 Screw.
8
9
GENERAL PARAM.(0-9)
ENTER NO. OR ∨ ^
10
or
or
1: General Settings
9 (09 KEY OPERATOR MODE)
12
17 DATE & TIME
_
02-04-2004 00:01
13
CAUTION
denotes hazards that could result in minor injury or damage to the machine.
● THIS PRODUCT CONTAINS A LITHIUM BATTERY. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.
"IMPROPER USE OR REPLACEMENT MAY CAUSE OVERHEATING, RUPTURE OR EXPLOSION RESULTING IN
INJURY OR FIRE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS OF YOUR LOCAL
SOLID WASTE OFFICIALS AND LOCAL REGULATIONS"
71
Problem Solving
Move the cursor (_) under
the Date/Month/Year/
Time that you wish to
change, then input the
new data using the
Keypad.
Appendix
Specifications
■ DP-1520P/1820P/1820E (For Copier)
Type:
Desk Top
Platen Type:
Fixed
Acceptable Originals:
Sheets, Books (max. A3 size)
Copying Method:
Laser Electrophotography
Fusing Method:
Heat Roller
Imaging Method:
Dry-Type Dual Components Imaging
Resolution:
Max. 600 dpi
Operation Panel:
LCD Display
Copy Size:
A3 - A5 via Paper Tray
Void Area:
Max. 0.2″ (5 mm)
Warm Up Time:
Approx. 30 seconds (20°C)
First Copy Time:
Less than 7.0 seconds (A4, from 1st Tray)
Multi-Copy Speed:
DP-1520P
: 15 cpm (A4 size) ,
DP-1820P/1820E : 18 cpm (A4 size)
Enlargement Ratios:
Preset:
Variable:
115%, 122%, 141%, 173%, 200%
from 101% to 200% in 1% increments
Reduction Ratios:
Preset:
Variable:
87%, 82%, 71%, 58%, 50%
from 99% to 50% in 1% increments
Paper Feed:
Standard Paper Tray (550 sheets) + Sheet Bypass (50 Sheets)
Optional Paper Trays (550 sheets x 3 )
(3rd and 4th Paper Trays are for DP-1820P/1820E only)
Paper Weight:
Paper Tray: 60 - 90 g/m2
Bypass:
55 - 133 g/m2
ADU:
64 - 90 g/m2 (DP-1820E)
Quantity Selector:
Max. 999 sheets (Output Tray capacity is 250 sheets/A4 size)
Electrical Consumption:
AC 220-240V, 50/60Hz, 6.5A
Power Consumption:
Max. 1.3 kW
Dimensions (W)(D)(H):
558 x 557 x 460 mm
Mass (Weight):
40 kg
Operating Environment:
Temperature: 10 - 30°C
[Humidity should be 70% or less at 30°C]
Relative Humidity: 30 - 80%
[Temperature should be 27°C or less at 80% RH]
■ ADF (DA-AS181)/i-ADF (DA-AR202)
Tray Capacity:
A4, A5:
50 sheets (80 g/m2)
A3, B4, FLS: 30 sheets (80 g/m2)
Original Size:
A5/A4/B4/A3/FLS
Paper Weight:
50 - 110 g/m2
Electrical Requirements:
Supplied from the machine
Dimensions (W)(D)(H):
DA-AS181: 558 x 501 x 112 mm
DA-AR202: 552 x 520 x 135 mm
Mass (Weight):
DA-AS181: 5.0 kg
72
DA-AR202: 9.3 kg
■ Network Scanner (DA-NS180)
Scanning Type:
Scanning Speed:
(w/o Transmission Time)
Resolution (dpi/Monochrome):
Max Scanning Area (Platen):
Max Scanning Area (ADF):
Duplex Scan:
Scanning Mode:
Scale:
CCD Image Sensor (ADF/Platen)
19 sheets/minute (A4)
Standard (150 x 150) / Fine (300 x 300) / SuperFine (600 x 600)
A3 (297 x 420 mm)
A3 (297 x 420 mm)
No
Text, Text/Photo, Photo
Bi-level / 256-level Gray Scale
Compression Format:
File Format:
Send to Station (PC):
MH, MR, MMR, JBIG
Multi-page TIFF, PDF
Yes (Single Address only)
Send to Station (FTP):
Yes (Single Address only)
Send to Station (Printer):
Not Available
Pop up Notification:
Yes
Protocol:
LPR, TCP/IP
Applicable OS:
Windows 98 / Me / NT 4.0 / 2000 / XP
■ 2nd/3rd/4th Paper Tray (DA-DS184/DS185)
Paper Size:
A5/A4/B4/A3
Paper Weight:
60 - 90 g/m2
Electrical Requirements:
Supplied by the machine
Dimensions (W)(D)(H):
558 x 538 x 128 mm
Mass (Weight):
DA-DS184 : 9.0kg
DA-DS185 : 9.4kg
73
Appendix
● Specifications are subject to change without notice.
Appendix
Options and Supplies
■ Options
Part Name
Part No.
Remarks
Automatic Document Feeder
DA-AS181
Also referred as ADF
Inverting Automatic Document
Feeder
DA-AR202
Also referred as i-ADF
(For DP-1820E only)
2nd/4th Paper Tray
DA-DS184
4th Paper Tray (For DP-1820P/1820E only)
3rd Paper Tray
DA-DS185
3rd Paper Tray (For DP-1820P/1820E only)
Stand for 1-Paper Tray configuration
DA-DA188
Stand for 2-Paper Tray configuration
DA-DA189
Stand for 3-Paper Tray configuration
DA-DA190
Stand for 4-Paper Tray configuration
DA-DA191
Image Memory (16 MB)
DA-SM16B
For Electronic Sorting
Image Memory (64 MB)
DA-SM64B
For Electronic Sorting
Image Memory (128 MB)
DA-SM28B
For Electronic Sorting
Expansion Flash Memory Card, 4 MB
UE-410047
Additional Page Memory for Fax Communication Board
Expansion Flash Memory Card, 8 MB
UE-410048
Additional Page Memory for Fax Communication Board
8 MB Expansion Board
DA-EM600
Expansion for PCL and PS printing
Printer Controller Module
DA-PC180
Printer Controller for PCL6
Multi Page Description
Language Controller Module
DA-MC180
Printer Controller for PCL6/PS3
Hard Disk Drive Unit
DA-HD18
Keyboard
DA-KB180
For Fax/Internet Fax/Scanning
Network Scanner Module
DA-NS180
Network Scanner
Internet Fax/E-Mail module
DA-NF180
Internet Fax/E-Mail Communication
Fax Communication Board
DA-FG180
G3 Fax/Tel Communication
Accounting Software
DA-WA10
For Accounting function
■ Supplies
Part Name
Part No.
Remarks
Toner
UG-TU10J
Toner
Verification Stamp
DZHT000004
X-Stamp for Fax Option
74
IMPORTANT INFORMATION
When requesting information, supplies or service always refer to the model and serial number of your
machine. The model and serial number plate (Main Name Plate) is located on the rear side of machine.
For your convenience, space is provided below to record information you may need in the future.
Model No.
Serial No.
Date of Purchase
Dealer
Address
Telephone Number
(
)
Supplies Telephone Number
(
)
Service Telephone Number
(
)
Model and Serial Number
Copyright © 2004 Panasonic Communications Co., Ltd.
All rights reserved. Unauthorized copying and distribution is a violation of law.
The contents of these Operating Instructions are subject to change without notice.
Microsoft, MS-DOS, Windows and Windows NT are registered trademarks of Microsoft Corporation
in the USA and other countries.
PEERLESSPAGE™ is a trademark of the PEERLESS Systems Corporation; and,
PEERLESSPrint® and Memory Reduction Technology® are registered trademarks PEERLESS
Systems Corporation; and, COPYRIGHT © 2000 PEERLESS Systems Corporation
Universal Font Scaling Technology (UFST) and all typefaces have been licensed from Agfa Monotype
For Service, Call:
For Customer Support:
Panasonic Communications Co., Ltd.
Fukuoka, Japan
http://www.panasonic.co.jp/global/
Ko0504-2044
DZSD002175-2
May 2004
Published in Japan
English
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising