Panasonic AG520G, AG513G Operating instructions

Panasonic AG520G, AG513G Operating instructions
IMPORTANTES PRECAUCIONES DE SEGURIDAD
Location of Controls
1
26 25 24
22
4
5
21
20
19
6
7
18
17
16
8
15
14
13
12
2 DISPLAY
Displays VCR status and clock.
3 TAPE POSITION
Locates tape position and amount of tape remaining.
4 COUNTER RESET
Resets to “0:00:00.”
5 RAPID TUNE
Displays the last channel you were watching.
6 MUTE
Mutes the sound instantly.
7
CHANNEL UP/DOWN
Selects a channel.
SELECT UP/DOWN
Controls navigation around on-screen menu.
8 ACTION
Displays Main Menu.
9 STOP
Stops recording or playback.
10 REWIND/SEARCH
Rewinds tape, and searches previous scene.
11 PAUSE/SLOW
Pauses and slow motion and frame advance picture.
12 REC
Records the program.
13 INPUT
Selects LINE input.
14 SPEED
Selects recording speed.
Stop mode, goes to the counter “0:00:00.” In Play
CM SKIP/ZERO SEARCH In
mode, skips over 1 to 3 minutes of tape.
FAST FORWARD/
Fast forwards tape, and searches next scene.
SEARCH
PLAY
Begins playback.
Displays SET PROGRAM screen. You can set Timer
PROGRAM
Program and On-Timer.
VOLUME UP/DOWN
Adjusts volume.
15
16
17
18
19
SET/BACK SPACE
21 ADD/DELETE
Sets a selected menu, or goes back to correct.
Goes directly to the desired recording. Locates end point
of recording.
Adds or deletes a channel.
22 NUMBER Keys
Selects channel directly.
20 SEARCH
23 TRACKING UP/DOWN
Reduces picture noise during Play and Slow.
24 SLEEP
Turns off the unit automatically.
Color and picture intensity level are adjusted for night
time use.
25 NIGHT
26 EJECT
Ejects tape. Eject is not available during recording.
Front View of the Unit and Indicators
1
VOL
CH
STOP/EJECT REW/
PLAY/REPEAT FF/
REC
INPUT
REC ON TIMER PROG TIMER
AUDIO IN
ACTION
2
3
4
5
6 7 8
PLAY
REPEAT
9 FAST FORWARD/
SEARCH
10 REC
11 INPUT
Broadcast & Digital Systems Company
Panasonic Broadcast & Television Systems Company
Division of Matsushita Electric Corporation of America
4
Executive Of¿ce:
One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7000
Eastern Zone:
One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621
Central Region:
1707 N Randall Road E1-C-1, Elgin, IL 60123 (847) 468-5200
5
Western Zone:
3330 Cahuenga Blvd W, Los Angeles, CA 90068 (323) 436-3500
6
Government Marketing Department:
52 West Gude Drive, Rockville, MD 20850 (301) 738-3840
7
Matsushita Electric Corporation of America
Corporate Sales Group, Hawaii Region
99-859 Iwaiwa ST., Alea, Hl 96701-3267 (808) 488-7779
8
12
13
14
15
16
Begins playback.
Repeats a recording.
Fast forwards tape, and
searches next scene.
Records the program.
Selects LINE input.
Receives infrared signal from
Remote Sensor
remote control.
REC Indicator
Lights during recording.
Lights when the On-Timer is
ON TIMER Indicator
set.
when the unit is set for
PROG TIMER Indicator Lights
Timer Recording.
Connect an earphone or
PHONES Jack
headphones.
a. Nunca cubra las aberturas de ventilación mientras el
aparato este ENCENDIDO, no ponga el aparato a
funcionar sobre la cama, el sillón, el tapete, o alguna
superficie blanda.
b. Evite la instalación incorporada, como en una biblioteca o
estantería, a menos que esté correctamente ventilada.
5 EVITE LUGARES EXTREMADAMENTE
CALIENTES O CAMBIOS BRUSCOS DE
TEMPERATURA
No coloque el aparato sobre o junto a un aparato de
calefacción, radiador o lo exponga a los rayos solares,
o dentro de un vehículo cerrado, en altas temperaturas
de más de 95 ºF (35 ºC), o 75 % de humedad. Si el
aparato es cambiado bruscamente de una temperatura
fría a caliente la humedad se puede condensar dentro
del aparato y causar daños a las cintas. Nunca
exponga el aparato a vibraciones, impactos o lo
coloque en una superficie desnivelada porque puede
causar serios daños a las partes interiores.
6 Para evitar daños personales
• Nunca coloque el aparato en alguna superficie insegura,
mantenga el aparato sobre una superficie segura,
nivelada y fuerte. De otra manera el aparato podría caer
causando daños a algún niño, adulto y dañar el aparato.
• Mueva cualquier aparato con cuidado y usando una mesa
rodante. Las paradas rápidas, exceso de fuerza, o las
superficies desniveladas pueden causar que los objetos
volteen.
• Siga cuidadosamente todas las
instrucciones de funcionamiento.
Rear View of the Unit
Panasonic Sales Company
1
Printed in Indonesia
LSQT0838 A
S0504-0
1 AC Power Plug
2 VHF/UHF Antenna Input Terminal
2
When plugged into an AC outlet, the unit consumes 2.5 W of electric power in OFF
condition.
In from your Antenna or Cable.
EMPALMADOR DE
CONEXIÓN A TIERRA
SISTEMA DE ELECTRODOS DE
CONEXIÓN A TIERRA DEL SERVICIO
ELÉCTRICO (ART, 250 DEL NEC, PARTE H)
USANDO EL APARATO
Antes de sacar el aparato del almacén, o moverlo de lugar,
consulte de nuevo esta sección referente a la seguridad.
1 Mantenga el aparato alejado del agua o la humedad,
como floreros, lavabos, tinas, etc.
2 Si es expuesto a la lluvia la humedad, o a un impacto
fuerte, desconecte el aparato y deje que lo examine un
inspector técnico calificado antes de usarlo.
3 Tormenta eléctrica
Durante una tormenta eléctrica, o antes de dejar el aparato sin
usar por un período largo de tiempo desconecte todo el equipo
de la energía eléctrica así como también la antena y el sistema
de cable.
4 CUANDO EL APARATO ESTE CONECTADO
•
-
NO LO PONGA A FUNCIONAR SI:
Ha caído líquido dentro del aparato.
El aparato se cayó o se dañó de alguna otra manera.
Si el aparato soltó humo, algún olor o hizo ruido, inmediatamente
desconecte el aparato, y haga que lo revise un técnico de servicio
para evitar las probabilidades de fuego y daños de cortocircuitos.
• Nunca tire o empuje ningún objeto en la abertura del aparato.
Tocar las partes internas del aparato puede causar cortocircuito o
incendios. No coloque ningún objeto extraño en charola.
• Mantenga objetos magnéticos, tales como bocinas lejos del
aparato para evitar interferencia eléctrica.
5 USO DE ACCESORIOS
Use solamente objetos recomendados por los fabricantes para
evadir los riesgos de fuego, electrochoques u otros daños.
6 PARA LIMPIAR EL APARATO
Desconecte el aparato. Use un trapo limpio y sin ningún
producto químico para limpiar el polvo suavemente. NO USE
químicos líquidos o aerosol, o aire forzado que se pueda
expandir, o deslizarse dentro del aparato y causar un choque
eléctrico. Cualquier substancia o cinta adhesiva, etc. pueden
marcar la superficie del gabinete. La exposición a la grasa, la
humedad o áreas con polvo pueden causar daños en las partes
internas del aparato.
SERVICIOS
1 NO ARREGLE EL PRODUCTO USTED MISMO
Si, después de seguir las instrucciones cuidadosa y
detalladamente el aparato no funciona adecuadamente, no trate
de abrir ni quitar las cubiertas, o hacer ningunos ajustes que no
se encuentren descritos en el manual. Desconecte el aparato y
comuníquese con un técnico calificado.
2 REEMPLAZO DE PARTES
Asegurase que el técnico de servicios use solamente partes de
manufactura o que tengan las características originales de
manufactura, el uso o substituto de partes inautorizadas puede
resultar en fuego, choques eléctricos o otros daños.
3 REVISION DE SEGURIDAD DESPUES DEL SERVICIO
Después de darle servicio o reparar el aparato solicite una
revisión cuidadosa de acuerdo como lo describe en las
escrituras de servicio de los fabricantes para asegurar que el
aparato este seguro y en condiciones operables.
-9-
PELIGRO DE DESCARGA
ELECTRICA NO ABRIR
PRECAUCION: PARA EVITAR LA POSIBILIDAD DE
UNA DESCARGA ELECTRICA NO DESMONTAR LA
CUBIERTA (O LA PARTE TRASERA). ESTE APARATO
NO PUEDE SER REPARADO POR EL PROPIETARIO.
PARA CUALQUIER TRABAJO DE SERVICIO SE
DEBE RECURRIR A UN TECNICO ESPECIALIZADO.
Este símbolo es una advertencia para el usuario de que el voltaje dentro del aparato podría
contener la suficiente magnitud para causar choques eléctricos. Por eso es peligroso el tratar de
hacer cualquier clase de contacto con cualquier parte de adentro de este aparato.
Este símbolo es una advertencia de la literatura importante concerniente al funcionamiento y
mantenimiento de este aparato que ha sido incluida. Por lo tanto es de suma importancia que
esta sea leída cuidadosamente para poder evitar cualquier problema.
-10-
Presione la tecla ACTION en el control
remoto para visualizar la pantalla del
menú SET CLOCK (FIJAR RELOJ).
2
SET:
Presione Ÿź para seleccionar el mes y
Ź para ajustar. De la misma forma,
seleccione y ajuste la fecha, año, hora y
DST (Hora de Verano).
SET CLOCK
1/ 4/2004 SUN 12:00AM
DST:ON
-----------------------
Realizando Configuracion Inicial
1
2
Enchufe el cable de alimentación en el
tomacorrientes de CA de la pared.
SELECT:
START :ACTION
Presione POWER en el control remoto o
la unidad. Comenzará el ajuste
automático de canales y del reloj.
CH AUTO SET PROCEEDING
• Si usa un convertidor de
cable, enciéndalo y ajústelo
al canal Public
Broadcasting Service (PBS)
de su zona horaria. Si usa
un receptor DSS (Sistema
digital de satélite), éste
deberá estar apagado.
AUTO CLOCK SET
3
SET:
Ajustar de nuevo el reloj
1
Presione ACTION para exhibir el menú.
2
Presione ŸźŻŹ para seleccionar
“RELOJ,” y luego presione ACTION.
TV
BLOQUEO IDIOMA
CANAL
Los ajustes se realizarán
automáticamente. Cuando termine,
aparecerá esta pantalla.
3
RELOJ
• La reproducción comienza automáticamente si
el casete no tiene la lengüeta para prevención
de grabación.
FIJAR PROGRAMACION
TEMPORIZADOR
ENCENDIDO AUTOMATICO
ELEGIR
:
FIJAR:
TERMINAR:PROG
Búsqueda hacia adelante Ö Presione FF
Búsqueda hacia atrás Ö Presione REW
• Después de comenzar la búsqueda, cada vez que
presione FF o REW cambiará la velocidad.
3
„ Para ver una imagen fija (congelada)
Presione Ź para visualizar la
pantalla.
Ö Presione PAUSE/SLOW
4
„ Para ver en cámara lenta
Ö Mantenga pulsado el botón PAUSE/SLOW
en el modo de imagen fija
P
1
2
3
4
FE
-----
INIC
--:---:---:---:--
PARADA
--:---:---:---:--
CA VEL
---------
„ Para ver imágenes cuadro a cuadro
Ö Presione PAUSE/SLOW en el modo de
imagen fija
ELEGIR
:
FIJAR:
TERMINAR:PROG
1) Presione Ź.
2) Para ajustar la FECHA de grabación,
presione Ÿź para seleccionar:
Ö Presione STOP
„ Para rebobinar la cinta
• 1 - 31 = Grabación única
• DIARIO = a la misma hora de lunes a viernes
• SEMANAL = a la misma hora una vez a la
semana
Ö Presione REW
„ Para expulsar la cinta
Combination VCR
Operating Instructions (Basic Operations)
For advanced operations, see the separate “Advanced Operations” instruction book.
Models No.
AG-513G/AG-520G
Professional / Industrial Video
Presione Ÿź para seleccionar
“MANUAL” y luego presione .
FIJACION AUTOMATICA
MANUAL
AJUSTE ZONA HORA : 0
Presione Ÿź y ŻŹ para seleccionar y
ajustar la hora y la fecha.
1
1/ 4/2004 DOM 12:00AM
VERANO:ACT
-----------------------
IS INCOMPLETE
PLEASE SET CLOCK BY
PRESSING ACTION KEY
5
Inserte el casete con lengüeta de
protección de grabación.
• El videograbador combinado se enciende
automáticamente.
2
Presione CH Ÿź, o las teclas de
numéros para seleccionar el canal.
3
Presione SPEED para seleccionar la
velocidad de grabación.
SP = reproducción normal
SLP = reproducción super larga
4
FE
INIC PARADA
10
9:00a12:00p
-- --:-- --:--- --:-- --:--- --:-- --:--
CA VEL
08
SP
-------
FIJACION ES COMPLETO
CANCELAR:ADD/DLT
ELEGIR
:
FIJAR:
TERMINAR:PROG
6
Salga de este modo. Presione PROG
dos veces.
• Si está usando un decodificador de TV cable,
asegúrese que se encuentra en el canal
deseado y que la alimentación queda conectada
para grabar con temporizador.
• El indicador PROG TIMER se enciende en el
videograbador combinado.
Presione REC para comenzar a
grabar.
• Para editar partes no deseadas de una
grabación, presione PAUSE/SLOW para hacer
una pausa durante la grabación.
5
Presione PROG para finalizar el
programa.
Para introducir más programas.
presione Ÿź y Ź para seleccionar y
ajustar el número de programa en
blanco, y luego repita el paso 4.
P
1
2
3
4
• La velocidad seleccionada debe aparecer en la
pantalla.
FIJAR RELOJ
AUTO CLOCK SET
3) Para los ajustes siguientes, presioneŸź
para seleccionar y presione Ź para
ajustar los tiempos de INICIO/ PARADA,
CANAL, o entrada de LINEA, y velocidad
del cassette.
Operaciones básicas para la
grabación
ELEGIR
:
FIJAR:
TERMINAR:ACTION
4
Fecha de hoy
Ö Presione EJECT en el control remoto o
STOP/EJECT en el videograbador
combinado
SALIR
FIJAR RELOJ
COMPLETED
• Los botones de funciones no funcionarán durante la
configuración inicial.
• Para retirar un casete durante el ajuste automático,
presione EJECT en el control remoto. Luego ajuste
manualmente. (Vea la p.10 de Libro de operaciones
avanzadas).
• Dependiendo de las condiciones, el ajuste automático de
reloj podría llevar más de 30 minutos. En tal caso,
presione STOP para detener la configuración y realizar
los ajustes manualmente. (Vea la p.10 de Libro de
operaciones avanzadas).
2
Presione Ÿź para seleccionar
TEMPORIZADOR.
„ Para encontrar una escena en
particular
ELEGIR:
FIJAR :ACTION
AUTO CLOCK SET
Nota:
Presione PLAY.
Presione PROG para visualizar la
pantalla FIJAR PROGRAMACION.
Ö Presione FF
CANCEL:STOP
Si “AUTO CLOCK SET IS INCOMPLETE”
aparece en pantalla, coloque el tiempo usando
el procedimiento manual (MANUAL CLOCK
SET), usa un convertidor.
• El videograbador combinado se enciende
automáticamente.
1
„ Para parar
Presione dos veces la tecla ACTION
para poner el RELOJ en marcha y salir.
MENU PRINCIPAL
1/ 4/2004 SUN 12:00PM
DST:ON
SETTING :
CH
2
Inserte un casete.
„ Para hacer avanzar la cinta
rápidamente
PROCEEDING
3
1
SET CLOCK
SELECT:
START :ACTION
Grabación con temporizador
Operaciones básicas para la
reproducción
1/ 1/2004 THU 12:00AM
DST:ON
-----------------------
Apretar demasiado los cables coaxiales RF
“tipo tuerca” podría dañar los conectores.
Asegúrelos solamente con los dedos.
CONDUCTORES CONEXIÓN
A TIERRA (SECCIÓN
S10-20 DEL NEC)
PRECAUCIÓN
PRECAUCION
Para Sistema Digital de Satelite (DSS)/Convertidor
de cable
Conecte la salida del convertidor de cable la “VHF/
UHF” con el RF cable.
PRECAUCIÓN
UNIDAD DE DESCARGA
DELA ANTENA (SECCIÓN
S10-20 DEL NEC)
EQUIPO DE
SERVICIO
ELÉCTRICO
PARA PREVENIR CHOQUES ELÉCTRICOS, ASEGURASE QUE LA CLAVIJA
HAGA JUEGO CON EL ENCHUFE Y CONÉCTELO COMPLETAMENTE.
Division of Matsushita Electric of Puerto Rico, Inc.
Ave. 65 de infantería. Km. 9.5 San Gabriel Industrial Park, Carolina, PR 00985
(787) 750-4300
1
EMPALMADOR
DE CONEXIÓN
A TIERRA
PARA PREVENIR INCENDIOS O CHOQUES ELÉCTRICOS NO EXPONGA
ESTE APARATO A LA LLUVIA O LA HUMEDAD.
VHF/UHF
Para Ant./Cable
Conecte Ant./Cable a la entrada de antena de la TV
(VHF/UHF).
BAJADA DE ANTENA
Precauciones de seguridad
ADVERTENCIA
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 624-5010
-8-
4 NO BLOQUEE LAS ABERTURAS DE
VENTILACION
Las aberturas de ventilación en el gabinete dejan
escapar el calor que es generado durante el
funcionamiento. Si estos son obstruidos el calor se
acumula, lo que puede resultar en un incendio o daños
a casetes o a discos.
Para su protección:
Realice todas las conexiones de cables o
antena antes de encenderlo.
Si el ajuste automático del reloj no se ha
completado, ajuste el reloj manualmente de la
siguiente manera:
CÓDIGOO ELÉCTRICO
NEC-NATIONAL
Importantes Precauciones de Seguridad
Equipped with 2 front
speakers.
AUDIO/VIDEO IN Jack For dubbing.
POWER
Turns unit on or off.
VOLUME UP/DOWN
Adjusts volume.
Sets a selected menu, or goes
SET/BACK SPACE
back to correct.
CHANNEL UP/DOWN Selects a channel.
picture noise during
TRACKING UP/DOWN Reduces
Playback and Slow Motion.
Controls navigation around
SELECT UP/DOWN
on-screen menu.
STOP
Stops recording or playback.
EJECT
Ejects tape.
ACTION
Press together with REW.
Rewinds tape, and searches
REWIND/SEARCH
previous scene.
ACTION
Press together with STOP.
1 Built-In Speaker
2
3
9 10 11 12 13 14 15 16
- Mantenga el cordón de energía alejado de los aparatos
que generen calor y de los espacios por donde se
camine. No coloque objetos pesados o cosas rodando
sobre el cordón de energía.
- No ajuste el cordón de ninguna manera.
- Si se usa una extensión de cordón, esta debe tener el
mismo tipo de clavija y estar seguramente conectado.
- Los enchufes sobrecargados o los cordones de
extensión, pueden causar incendios.
- Cordones dañados cortados o cables craqueados pueden
causar incendios y deben ser remplazados por un
electricista calificado.
1 SEGURIDAD PARA LA INSTALACION DE LA ANTENA Y EL CABLE
Un sistema de antena o cable instalado afuera debe de estar apropiadamente
incrustado en la tierra para proveer algo de protección contra la estática y las
cargas de voltaje. La Sección 810 de el código nacional de electricidad ANSI /
NFPA 70 (en Canadá parte 1 del código de electricidad de Canadá) que provee
con información acerca de la manera apropiada para poner tierra en el mástil y
asegurar la estructura, la entrada del
alambre a la tierra y dirigirlo a una
unidad de descarga de la antena,
tamaño de los conductores de tierra,
la ubicación de la unidad de descarga
de la antena, conexiones de los
electrodos, y los requerimientos para
los electrodos de tierra.
2 MANTENGA LA ANTENA
ALEJADA DE LOS CABLES Y CIRCUITOS DE ALTO VOLTAJE.
Sitúe el sistema de antena de afuera alejado de las líneas eléctricas o circuitos
de energía para en caso de caerse este no toque las líneas de energía
eléctrica. Cuando instale la antena nunca toque los cables de energía eléctrica,
los circuitos eléctricos u otros recursos de energía.
Rear View of the Unit
POWER
VIDEO IN
1 Precauciones para los recursos de energía
Opérelo solamente usando la fuente de energía
indicada en el aparato o en este manual. Si tiene
dudas haga que su compañía de utilidades eléctricas o
a su distribuidor que verifiquen las fuentes de energía
de su casa.
2 Enchufar el cordón de energía
Para la seguridad de este aparato, este posee una
clavija de tipo polarizado (una clavija ancha) o una
clavija de tres patas. Siempre mantenga el enchufe
firmemente y asegurase de que tenga las manos secas
cuando conecte o desconecte el enchufe del cordón de
energía. Limpie el polvo y la tierra del enchufe
regularmente.
PRECAUCIONES PARA EL ENCHUFE POLARIZADO:
La clavija queda en el enchufe de una manera
solamente, si esta no entra trate de revertirla y si aun
no le es posible conectarla llame a un electricista para
que le instale un enchufe apropiado. No trate de ajustar
la clavija.
PRECAUCIÓN CON ENCHUFES CON TOMA A
TIERRA:
Este enchufe sólo entrará en una toma con conexión a
tierra de tres orificios. Si fuera necesario, que un técnico
electricista le instale la toma de red adecuada. No
desactive esta función de seguridad manipulando el
enchufe de ninguna manera.
3 CORDON DE ENERGIA
Para evitar un mal funcionamiento del aparato y para
protegerse de un corto circuito, fuego o un daño
personal.
Front View of the Unit and Indicators
9
10
11
Turns unit on or off.
Ajuste manual del reloj
Conectando
Spanish Quick Use Guide/Guía para rápida consulta
Spanish Quick Use Guide/Guía para rápida consulta
23
2
3
1 POWER
PARA REDUCIR EL RIESGO DE GOLPES ELÉCTRICOS, INCENDIOS, HERIDAS O DAÑOS A ESTE
PRODUCTO, LEA Y GUARDE TODAS LAS INSTRUCCIONES DE SEGURIDAD Y FUNCIONAMIENTO.
TENGA EN CUENTA TODAS LAS ADVERTENCIAS INDICADAS EN EL MANUAL Y EN EL PRODUCTO.
Instalación
INSTALACION PARA LA ANTENA AFUERA
Remote Control Buttons
ADVERTENCIA
Remote Control Buttons
Spanish Quick Use Guide/Guía para rápida consulta
Presione STOP para detener la
grabación.
Table of Contents
IMPORTANT SAFEGUARDS AND PRECAUTIONS ........................................2
Safety Precautions/Mesures de sécurité ...........................................................3
Before Using ......................................................................................................4
Connections/Initial Setup (Ready to Play) .........................................................5
Basic Operation (Unit) .......................................................................................6
Basic Operation (Tape) .....................................................................................7
Location of Controls ..........................................................................................9
IMPORTANTES PRECAUCIONES DE SEGURIDAD ....................................10
Spanish Quick Use Guide/Guía para rápida consulta .....................................11
ELEGIR
:
FIJAR:
INICIAR :ACTION
5
Presione ACTION dos veces para que el
reloj comience a funcionar y salir desde
este modo.
„ El videograbador combinado deja de
grabar a una hora prefijada.
(Grabación de un toque)
Presione REC repetidamente para ajustar la
duración de la grabación como sigue:
como sigue: 30 min. Ö 1 hr Ö 1:30 Ö 2:00 Ö
3:00 Ö 4:00 Ö Salida
As an ENERGY STAR® Partner,
Matsushita Electric Corporation of America has determined
that this product or product model meets the ENERGY STAR®
guidelines for energy ef¿ciency.
Please read these instructions carefully before attempting to connect,
operate, or adjust this product. Please save this manual.
Spanish Quick Use Guide is included.
(Guía para rápida consulta en español está incluida.)
This operating instruction book is designed for use with models AG-513G
and AG-520G. Illustrations in this manual show the AG-520G.
-11-
-12-
LSQT0838 A
WARNING
WARNING
OUTDOOR ANTENNA INSTALLATION
2 POWER CORD PLUG
ANTENNA LEAD
IN WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUND
CLAMP
GROUNDING
CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE
GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
To avoid unit malfunction, and to protect against
electrical shock, fire or personal injury:
USING THE UNIT
VIDEO HEADS MAY
NEED CLEANING
PLEASE INSERT HEAD
CLEANING CASSETTE
OR REFER TO MANUAL
Specifications
Picture Tube
• Use “dry” type head cleaning cassette only.
(Part No. NV-TCL30PT is recommended.)
• Follow cleaning tape instructions carefully.
Excessive use of tape can shorten head life.
VCR
Video Recording
System
Audio Track
Tuner
Broadcast Channels
CABLE Channels
General
Power Source
Power
On
Power
Consumption Power
Off
Television System
Speaker
Operating
Temperature
Operating Humidity
Record/Playback Time
SP
(Standard
Play)
SLP
(Super Long
Play)
mark in this unit.
Type of Video Cassette
T120
T160
T180
2 Hours
2 Hours 40
Minutes
3 Hours
6 Hours
8 Hours
Press POWER on remote or unit.
Auto channel and clock set starts.
Weight
9 Hours
Dimensions
(W X H X D)
CH AUTO SET PROCEEDING
2 rotary heads helical scanning
system
1 track
120 V AC, 60 Hz
• Approx. 69 W (AG-513G)
• Approx. 110 W (AG-520G)
SET CLOCK
• If you use a cable box,
turn it on and set it to
the Public Broadcasting
Service (PBS) channel
in your time zone. If
you use a DSS
receiver, it must be
turned off.
SELECT:
START :ACTION
2
5 °C ~ 40 °C (41 °F ~ 104 °F)
10 % ~ 75 %
• 12 Kg (26.4 lbs.) (AG-513G)
• 23 Kg (50.6 lbs.) (AG-520G)
• 386 mm (15-3/16s) X 385 mm
(15-3/16s) X 374 mm (14-3/4s)
(AG-513G)
• 515 mm (20-5/16s) X 505 mm
(19-7/8s) X 474 mm (18-11/16s)
(AG-520G)
PROCEEDING
1/ 4/2004 SUN 12:00AM
DST:ON
-----------------------
CANCEL:STOP
3
Settings are made automatically.
When complete, this screen appears.
SELECT:
START :ACTION
3
• Designs and specifications are subject to change without
notice.
DST: ON Ö Sets clock ahead one hour.
„ Autumn (Last Sunday in October)
DST: ON Ö Turns clock back one hour.
-4-
Press ACTION to start clock and
exit.
1/ 4/2004 SUN 12:00PM
DST:ON
SETTING :
CH
Reset all unit Memory Functions
AUTO CLOCK SET
COMPLETED
Returns to factory setting. Use if relocating unit,
or if Initial Setup needs to be redone.
• Make sure a tape is not inserted in unit.
If “AUTO CLOCK SET IS INCOMPLETE”
appears, manually set clock. See “Manual
Clock Set” section.
1
Turn unit Power on.
2
Press and hold both PLAY/REPEAT
and FF on unit for more than
5 seconds.
• The power will shut off.
• Please ignore “NO CASSETTE” warning.
AUTO CLOCK SET
IS INCOMPLETE
PLEASE SET CLOCK BY
PRESSING ACTION KEY
3
• Function buttons are void during Initial Setup.
• To eject a tape during Auto Set, press EJECT on
remote. Then make settings manually. (See
Advanced Operations book, p10.)
• If Auto Clock Set takes more than 30 minutes, press
STOP and perform settings manually. (See Advanced
Operations book, p10.)
• If your area does not observe Daylight Saving Time, select
DST: OFF.
• Keep these time changes in mind when programming unit
for timer recordings.
-3-
SET:
-5-
Do “Initial Setup” at left.
Note to CABLE System Installer
This reminder is provided to call the CABLE
(Cable TV) System Installers attention to
Article 820-40 of the NEC that provides
guidelines for proper grounding and, in
particular, specifies that the cable ground
shall be connected to the grounding system
of the building, as close to the point of cable
entry as practical.
Press CH Ÿź or NUMBER keys to
select a channel.
Press NIGHT to cancel.
• Previous settings are
restored.
• NIGHT mode is canceled
when power is turned off or
power failure occurs.
2
Record tab
• For “LINE” input, see p. 6.
Press PLAY.
• Playback begins if
tape has no record
tab.
„ Press FF to forward scene search
„ Press REW to reverse scene search
3
Press VOL + or VOL - to adjust volume.
Notes:
Selecting Input Mode
„ Method 1
24
„ Method 2
When selecting CABLE channels 100 to 125 with
NUMBER keys, first press 100 key, and then enter
the remaining two digits.
Press CH Ÿź. Display will change as below.
1
„ Rapid Tune
Press R-TUNE to display the last channel you were
watching.
LINE
„ Audio Mute
• You can set the Input mode from MENU.
MAIN MENU Ö TV Ö INPUT SELECT Ö TUNER or
LINE
„ Phones
Connect an earphone (not supplied) or headphones
(not supplied) to PHONES Jack.
ACTION key on unit
VCR Status & Clock Display
Channel
REC
0:47
12:00PM
CH 08
0:12:20
SLP
NO V-CHIP DATA
On Unit
SELECT:
END
:PROG
3
4
CANCEL:ADD/DLT
SELECT:
SET:
END
:PROG
„ To Replace program...
P DT
START STOP
CH SPD
1 10
9:00a12:00p 08
SP
2day 11:00a11:30a125 SLP
3 12
8:00p 9:30p
L
SP
4 -- --:-- --:----
SELECT:
EXIT
:PROG
SET:
On Unit
DT
-----
Today’s
Date
START STOP
--:-- --:---:-- --:---:-- --:---:-- --:--
1) Press Ź.
2) Set record DATE,
press Ÿź to select:
CH SPD
---------
SET:
8
7
9
31
SELECT
P DT
START STOP
CH SPD
1 -- --:-- --:---2day 11:00a11:30a125 SLP
3 12
8:00p 9:30p
L
SP
4 -- --:-- --:----
/
1
2
Selection Order
WEEKLY
(MO)
SELECT:
END
:PROG
6
DAILY(day)
3
WEEKLY
(SU)
3) Set remaining items,
press Ź to set
START/ STOP times,
Channel or LINE, and
tape speed. Then
press Ÿź to select.
• This feature is cancelled if any button is pressed during
above mode.
Insert a tape Ö Power comes on
Ö Play starts if there is no record tab
DT
START STOP
10
9:00a12:00p
-- --:-- --:--- --:-- --:--- --:-- --:--
6
„ Playback Auto Eject
(Repeat Play is “OFF”)
Play Ö Tape end Ö Rewind Ö Stop
Ö Tape ejects if there is no record tab
-6-
Press PROG twice to exit this mode.
Cancel a Timer Recording
CH SPD
08
SP
-------
(Recording is in progress)
Hold down STOP for a few seconds to cancel
the Timer Recording.
SET COMPLETED
Tape end Ö Rewind Ö Stop
SET:
• 2 minutes before Timer recording is performed,
“PLEASE PREPARE FOR TIMER REC” appears
and/or the PROG TIMER Indicator flashes. Be sure a
cassette with record tab is loaded and the unit is in
Stop mode.
• If there is a power interruption of more than one
minute, the recording may not be performed or
continued.
CANCEL:ADD/DLT
SELECT:
SET:
END
:PROG
„ Auto Rewind
Press ADD/DLT.
Notes:
Press PROG to end the program.
To Enter More Programs, press Ÿź to
select and Ź to set an unused
program. Then repeat step 4.
P
1
2
3
4
„ Auto Playback
SET:
„ To Clear program...
• 1~31 = One time
• DAILY = Mon,~Fri.
• WEEKLY = Same time
each week
WEEKLY
(SA)
5
1) Press Ź.
2) Repeat step 4 (at
left) to set new
programs.
3) Press PROG.
Press Ź to display screen.
P
1
2
3
4
Example
Ÿ : CH UP
ź : CH DOWN
Ź : VOLUME UP
Ż : VOLUME DOWN
Whenever the menu or program screen is displayed,
CHANNEL UP/DOWN function as Ÿź and
VOLUME UP/DOWN function as ŻŹ only.
Press Ÿź to select the desired
program.
P DT
START STOP
CH SPD
1 10
9:00a12:00p 08
SP
2day 11:00a11:30a125 SLP
3 12
8:00p 9:30p
L
SP
4 -- --:-- --:----
TIMER PROGRAMMING
ON TIMER
CH
Blue Screen Display
No broadcast signal in TV (Only when Weak Signal
Display is set to OFF), blank tape is played for
5 minutes
Ö Power turns off
2
Press PROG to display SET
PROGRAM screen.
Press Ÿź to select TIMER PROGRAMMING.
SELECT:
END
:PROG
„ Auto Shut Off
(Recording is not in progress)
1 Repeat steps 1~3 at left.
SET PROGRAM
VOL
Auto Operation Functions
Review, Replace or Clear Program Contents
• These features work best in SLP mode.
• After 3 minutes in Still or Slow mode, unit stops to
protect the tape and the video heads.
Tape Speed
On Remote
• After 5 minutes in Pause mode, unit stops to protect
the tape and the video heads.
Press STOP.
You can operate the menu screen using unit
buttons. To display the menu, press STOP/EJECT
and REW together with no tape inserted. To exit the
menu, repeat above.
Whenever a blank section of a tape comes up in
Play mode, or when the selected channel has no
broadcast signal with the Weak Signal Display set to
“OFF”, the screen will turn solid blue.
Press STOP to stop recording.
Notes:
2
Using ŸźŻ Ź keys
Rec Time Remaining
(OTR mode only, see p. 7)
5
• To edit, press PAUSE/SLOW to pause, and
again to resume recording.
Note:
„ Press REW to rewind tape
„ Press FF to fast forward tape
„ Press EJECT on remote or STOP/
EJECT on unit to eject tape
1
ACTION
Counter
Press REC to start recording.
Press REC repeatedly to set length as follows:
30 min. Ö 1 hr. Ö 1:30 Ö 2:00 Ö 3:00 Ö 4:00 Ö
exit
Ö Press PLAY to release.
3
4
Timer Recording
STOP/EJECT REW/
Press DISPLAY to display or remove overlay.
Current Time
3
(CABLE) (TV)
125 or 69
Note:
Press MUTE to instantly mute the sound. Press
again to restore the previous sound level.
Function Status
2
Press SPEED to select recording
speed. (P. 4)
„ One Touch Recording (OTR)
„ Press PAUSE/SLOW to still (freeze) picture
„ Hold down PAUSE/SLOW in Still
mode to slow motion picture
Press INPUT repeatedly.
Channel Number Ù LINE
„ Using 100 key
• After search has begun, each additional press of
FF or REW changes speed.
• FF and REW search speed may vary depending on
current tape position.
• After 10 minutes in search mode, unit returns to
Play mode to protect the tape and the video heads.
3
• Any future daily or weekly recordings will be
performed as programmed.
Press PROG twice to exit this mode.
• If you’re using a cable box, make sure that it is
tuned to the desired channel and the power is
left on for timer recording.
• PROG TIMER indicator lights on unit.
-7-
Review, Replace Cancel a Timer
or Clear Program
Recording
Contents
„ Spring (First Sunday in April)
Press Ÿź to select the month and
Ź to set. In the same manner, select
and set the date, year, time, and
DST. (Daylight Saving Time)
SET CLOCK
Notes:
Note:
SET:
AUTO CLOCK SET
Approx. 2.5 W
EIA Standard NTSC color
1 pieces
Press ACTION on remote to display
SET CLOCK menu.
1/ 1/2004 THU 12:00AM
DST:ON
-----------------------
• 13 inch measured diagonal
90° deÀection Picture Tube
(AG-513G)
• 20 inch measured diagonal
90° deÀection Picture Tube
(AG-520G)
VHF 2 ~ 13, UHF 14 ~ 69
Midband A through I (14 ~ 22)
Superband J through W (23 ~
36) Hyperband AA ~ EEE (37 ~
64) Lowband A-5 ~ A-1 (95 ~ 99)
Special CABLE channel 5A(01)
Ultraband 65 ~ 94, 100 ~ 125
1
2
Press NIGHT to set.
NIGHT
• The unit power comes on automatically.
Playback a Tape
Digital Auto Tracking
Continuously analyzes the signal and adjusts for
optimum picture quality.
Manual Tracking Control
(to reduce picture noise)
Use during Playback and Slow Motion mode to
reduce picture noise. Press the 3 or 6 number key on
the remote control or CH Ÿź on the unit until the
picture clears up. To return to Auto Tracking, press
POWER off, then on again a few seconds later.
If AUTO CLOCK SET was incomplete.
Plug unit power cord into AC wall
outlet.
Display
END:PLAY
Tape Speed
Setting
1
2
Head Clog Sensor
Screen-left appears during
play if clogging is detected.
To remove screen, press
PLAY.
Only use tapes with the
Cover the hole with
cellophane tape.
Screwdriver
Manual Clock Set
Insert a tape with record tab.
• Unit power comes
on automatically.
• Loose or peeling
labels may cause
tape jam.
Record On a
Tape
-2-
Record
Tab
IN from ANT./
CABLE
Reset all unit
Memory Functions
After unit is serviced or repaired, request that a
through safety check be done as described in the
manufacturer’s service literature to ensure video unit
is in safe operating condition.
VHF/UHF
Initial Setup (Ready to Play)
Unit auto adjusts clock for DST.
Unplug unit. Use a clean, dry, chemically untreated
cloth to gently remove dust or debris. DO NOT USE
cleaning fluids, aerosols, or forced air that could
over-spray, or seep into unit and cause electrical
shock. Any substance, such as wax, adhesive tape,
etc. may mar the cabinet surface. Exposure to
greasy, humid, or dusty areas may adversely affect
internal parts.
Overtightening “Nut type” RF coaxial cables
may damage jacks. Finger tighten only.
VHF/UHF
DST (Daylight Saving Time)
6 CLEANING UNIT
3 SAFETY CHECK AFTER SERVICING
To record again.
VHF/UHF
Manual Clock Set
Use only accessories recommended by the
manufacturer to avoid risk of fire, shock, or other
hazards.
Make sure the service technician uses only parts
specified by the manufacturer, or have equal safety
characteristics as original parts. The use of
unauthorized substitutes may result in fire, electric
shock, or other hazards.
Break off the tab to
prevent recording.
CAUTION
1
Insert a tape.
Timer
Recording
DO NOT OPERATE IF:
liquid has spilled into unit.
unit was dropped or otherwise damaged.
unit emits smoke, malodors, or noises.
Immediately unplug unit, and have it inspected by a
service technician to avoid potential fire and shock
hazards.
• Never drop or push any object through openings in unit.
Touching internal parts may cause electric shock or fire
hazard.
• Keep magnetic objects, such as speakers, away from unit
to avoid electrical interference.
5 USING ACCESSORIES
2 REPLACEMENT OF PARTS
Prevent Accidental Tape Erasure
Initial Setup
(Ready to Play)
If, after carefully following detailed operating
instructions, the unit does not operate properly, do
not attempt to open or remove covers, or make any
adjustments not described in the manual. Unplug
unit and contact a qualified service technician.
Loading the Batteries
Cable TV
Converter Box
1
Usingʆʈʉʇ
keys
•
-
1 DO NOT SERVICE PRODUCT YOURSELF
Connect the OUT jack on your cable box to
the VHF/UHF terminal on unit with a RF
cable.
Connecting
4 WHEN UNIT IS PLUGGED IN
SERVICE
„ For DSS/Cable Box
Features for a Quality Picture
During a lightning storm, or before leaving unit
unused for extended periods of time, disconnect all
equipment from the power source as well as the
antenna and cable system.
VHF/UHF
UNIT (rear view)
Specifications
• Never place unit on support or stand that is not firm, level,
and adequately strong. The unit could
fall causing serious injury to a child or
adult and damage to the unit.
• Move any appliance and cart
combination with care. Quick stops,
excessive force, and uneven surfaces
may cause objects to overturn.
• Carefully follow all operating
instructions.
• Serial No.
Old or damaged tapes may clog heads.
This product utilizes both a Cathode Ray Tube (CRT) and other components that contain lead.
Disposal of these materials may be regulated in your community due to environmental
considerations. For disposal or recycling information please contact your local authorities, or the
Electronics Industries Alliance: <http://www.eiae.org.>
IN from ANT./
CABLE
• Model No.
Head Cleaning
Safety Precautions/Mesures de sécurité
6 TO AVOID PERSONAL INJURY
VHF/UHF
• Do not mix old and new batteries.
• Do not mix alkaline with manganese batteries.
This symbol alerts the user that important literature
concerning the operation and maintenance of this unit has
been included. Therefore, it should be read carefully in
order to avoid any problems.
1 KEEP UNIT WELL AWAY FROM WATER
OR MOISTURE, such as vases, sinks,
tubs, etc.
2 IF EXPOSED TO RAIN, MOISTURE, OR
STRONG IMPACT, unplug unit and have it
inspected by a qualified service technician
before use.
3 ELECTRICAL STORMS
Do not place unit over or near a heater or radiator,
in direct sunlight, etc. If unit is suddenly moved from
a cold place to a warm place, moisture may
condense in unit and on the tape causing damage.
„ Batteries 2 “AA”
• Dealer Phone No.
Battery replacement caution
Before unit is brought out of storage or moved to a
new location, refer again to the INSTALLATION
section of these safeguards.
5 AVOID EXTREMELY HOT LOCATIONS
OR SUDDEN TEMPERATURE CHANGES
VHF/UHF
Prevent Accidental
Tape Erasure
Ventilation openings in the cabinet release heat
generated during operation. If blocked, heat buildup may result in a fire hazard or heat damage to
cassettes.
For your protection:
a. Never cover ventilation slots while unit is ON, or
operate unit while placed on a bed, sofa, rug, or
other soft surface.
b. Avoid built-in installation, such as a book case or
rack, unless properly ventilated.
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL
• Dealer Address
Accessories
4 DO NOT BLOCK VENTILATION HOLES
This video recorder, equipped with the HQ (High Quality) System, is compatible with existing VHS
equipment. Only use those tapes with the
mark. It is recommended that only cassette tapes that
have been tested and inspected for use in 2, 4, 6, and 8 hour VCR machines be used. This television
receiver provides display of television closed captioning in accordance with §15.119 of the FCC
rules.
This symbol warns the user that uninsulated voltage
CAUTION
within the unit may have sufficient magnitude to cause
RISK OF ELECTRIC SHOCK
electric shock. Therefore, it is dangerous to make any
DO NOT OPEN
kind of contact with any inside part of this unit.
Use CH Ÿź or NUMBER keys to select
a channel.
Record On a Tape
Selecting Input ACTION key on
Mode
unit
Locate an outside antenna system well away from
power lines and electric light or power circuits so it
will never touch these power sources should it ever
fall. When installing antenna, absolutely never touch
power lines, circuits or other power sources as this
could be fatal.
ANY UNAUTHORIZED CHANGES OR MODIFICATIONS TO THIS
EQUIPMENT WOULD VOID THE USER’S AUTHORITY TO OPERATE.
2
CH 08
DST (Daylight
Saving Time)
2 KEEP ANTENNA CLEAR OF HIGH
VOLTAGE POWER LINES OR CIRCUITS
- Keep power cord away from heating appliances and
walking traffic. Do not rest heavy objects on, or roll such
objects over the power cord.
- Do not tamper with the cord in any way.
- An extension cord should have the same type plug
(polarized or grounding) and must be securely connected.
- Overloaded wall outlets or extension cords are fire
hazards.
- Frayed cords, damaged plugs, and damaged or cracked
wire insulation are hazardous and should be replaced by
a qualified electrician.
FCC WARNING:
Press POWER on remote or unit.
Playback a Tape
NIGHT Mode
3 POWER CORD
POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME
LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
1
• Dealer Purchased From
Record/Playback
Time
An outside antenna or cable system must be
properly grounded to provide some protection
against built up static charges and voltage. Section
810 of the National Electrical Code, ANSI/NFPA 70
(in Canada, part 1 of the Canadian Electrical Code)
provides information regarding proper grounding of
the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna discharge
unit, connection to grounding electrodes, and
requirements for the grounding electrode.
ATTENTION:
Connect the cable from Antenna/Cable to
the VHF/UHF terminal on unit.
NIGHT Mode
Color and picture intensity levels are adjusted so the
screen is easier on your eyes during night time use.
Auto Operation
Functions
ELECTRIC
SERVICE
EQUIPMENT
AFIN DE PRÉVENIR TOUT RISQUE D’INCENDIE OU DE CHOCS
ÉLECTRIQUES, NE PAS EXPOSER CET APPAREIL À LA PLUIE OU À
UNE HUMIDITÉ EXCESSIVE.
UNIT (rear view)
Features for a
Quality Picture
For safety, this unit has a polarized type plug (one
wide blade), or a three-wire grounding type plug.
Always hold the plug firmly and make sure your
hands are dry when plugging in or unplugging the
AC power cord. Regularly remove dust, dirt, etc. on
the plug.
POLARIZED PLUG CAUTION:
The plug fits into outlet one way. If it cannot be fully
inserted, try reversing it. If it still will not fit, have an
electrician install the proper wall outlet. Do not
tamper with the plug.
GROUNDING PLUG CAUTION:
The plug requires a three-hole grounding outlet. If
necessary, have an electrician install the proper
outlet. Do not tamper with the plug.
AVERTISSEMENT:
EUR7723010
„ For ANT./Cable
TV Operation
Blue Screen
Display
NEC - NATIONAL
ELECTRICAL CODE
„ Remote Control
Basic Operation (Tape)
Head Cleaning
1 SAFE ANTENNA AND CABLE
CONNECTION
Operate only from power source indicated on unit or
in this manual. If uncertain, have your Electric Utility
Service Company or Video Products Dealer verify
your home power source.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG
TO WIDE SLOT, FULLY INSERT.
Please make all cable or antenna connections before power on.
• Date of Purchase
Important Safeguards and Precautions
1 POWER SOURCE CAUTION
CAUTION
Connecting
Accessories
on your new purchase! With proper use, this
dependable product will provide years of enjoyment.
Please fill in the information below. (Serial number
is on tag on back of unit.)
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.
Basic Operation (Unit)
VCR Status &
Clock Display
INSTALLATION
Congratulations
Loading the
Batteries
TO REDUCE THE RISK OF ELECTRIC SHOCK, FIRE, INJURY TO PERSONS OR
DAMAGE TO THIS PRODUCT, READ AND RETAIN ALL SAFETY AND OPERATING
INSTRUCTIONS. HEED ALL WARNINGS IN THE MANUAL AND ON THE PRODUCT.
Connections/Initial Setup (Ready to Play)
TV Operation
Before Using
Safety Precautions/Mesures de sécurité
Congratulations
IMPORTANT SAFEGUARDS AND PRECAUTIONS
Reset Language, Channels, Clock, Time Zone Adjust
Copy Your Tapes (Dubbing)
Connections you’ll need to make.
MAIN MENU
Recording (Editing) unit
Warning and Instruction Displays
These displays will alert you to a missed operation or provide further instructions.
Press ACTION to display MAIN MENU.
TV
LOCK LANGUAGE
CH
CLOCK
OSD
VIDEO IN
AUDIO IN
OUT TO TV
1
Press ŸźŻŹ
to select
“LANGUAGE.”
Channels
1
Press ŸźŻŹ
to select “CH,”
and press
ACTION.
MAIN MENU
TV
Playback (Source)
Recording (Editing) unit
1
1
Insert pre-recorded tape.
Insert blank tape with record tab.
• Dubbing tapes protected with Copy Guard will have
poor quality results.
CLOCK
TV
EXIT
CH
SELECT:
SET
:ACTION
2
Press ACTION
repeatedly.
2
TV
LOCK LANGUAGE
CH
CLOCK
EXIT
SELECT:
SET
:ACTION
Select “LINE” mode.
MENU PRINCIPAL
TV
3
Press PLAY then PAUSE at starting
point to put in Standby mode.
3
Press REC, then PAUSE/SLOW
immediately to put in Standby mode.
RELOJ
For Spanish
MENU
BLOCAGE LANGUE
CANAL HORLOGE SORTIE
SEL.
:
REGLER:ACTION
For French
(Perform operation of steps 4 and 5 on both units at same time.)
4
Press PLAY to start dubbing.
4
Press PAUSE/SLOW to start dubbing.
3
EXIT
2
Press Ÿź to
select
“ANTENNA,”
then press Ź to
set your
antenna system
(“TV” or
“CABLE”).
SELECT:
END
:ACTION
Press ŸźŻŹ
to select
“EXIT,” and
press ACTION
to exit.
3
Press Ÿź to
select “AUTO
SET,” then
press Ź.
Press STOP to stop dubbing.
• After Channel Auto
Set is finished,
Clock Auto Set will
be performed. (If
clock is set
manually, Clock
Auto Set will not be
performed.)
3
NO CASSETTE
If you press PLAY, FF, REW, or REC without a
cassette inserted...
PLEASE PREPARE
FOR TIMER REC
AUTO CLOCK SET
MANUAL
TIME ZONE ADJUST : 0
SELECT:
END
:ACTION
SET:
Press Ÿź and
press ŻŹ to
select and set
the month,
date, year,
time, and DST
(Daylight
Saving Time).
SET:
and press Ź
repeatedly to
select mode.
+1
Monitor
No picture or sound...
Poor TV reception...
If the unit is not in Stop mode, or cassette is not
inserted, or cassette has no record tab, or tape
is at its end two minutes before a Timer
Recording is about to begin...
No color or poor color...
SELECT:
START :ACTION
Add or Delete a Channel
CHANNEL 08 ADDED
IMPORTANT
Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement.
„ To delete channel
Select channel with CH Ÿź or number keys
and press ADD/DLT.
SET:
Press ACTION
twice to start
the clock and
exit this mode.
Adjust VOLUME control. (BO p. 6)
Adjust SHARPNESS and PICTURE controls in the SET UP TV
menu. (AO p. 2)
Adjust TINT and COLOR controls in the SET UP TV menu.
(AO p. 2)
Install a directional antenna.
Ghost (multiple) images...
TV programs cannot be
Make sure the selected channel is in unit’s memory. (AO p. 10)
watched...
Channel cannot be selected... Only the channel being recorded can be viewed on this unit.
TV program cannot be
recorded...
If head cleaning becomes necessary while
playing back a tape...
VCR LOCK ACTIVATED
If you press a function button other than STOP/
EJECT or POWER while the unit is in VCR Lock See page 5
mode...
See page 4 of Basic
Operations book
Timer recording cannot be
performed…
No playback picture, or the
playback picture is noisy or
contains streaks...
Press ACTION
twice to exit.
CORRECTION
Make sure your antenna system (TV or CABLE) is correctly set.
(AO p. 10)
Completely insert Power Plug into an AC outlet.
Set POWER button to ON.
Adjust BRIGHTNESS, SHARPNESS, and PICTURE controls in the
SET UP TV menu. (AO p. 2)
VCR
VIDEO HEADS MAY
NEED CLEANING
PLEASE INSERT HEAD
CLEANING CASSETTE
OR REFER TO MANUAL
END: PLAY
-1
3
No power…
Poor picture with normal
sound...
Poor sound with normal
picture...
See page 7 of Basic
Operations book
VCR cannot be controlled...
Models No.
AG-513G/AG-520G
Professional / Industrial Video
CORRECTION
Make sure your antenna system (TV or CABLE) is correctly set.
(AO p. 10)
Make sure cassette record tab is intact. (BO p. 4)
Check that clock is set to current time and date.
Make sure DSS/CABLE box (if used) is left on and tuned to channel
to be recorded.
Set recording Start/Stop times correctly. (BO p. 7)
Timer recording may not be performed or continued if a power
interruption of more than 1 minute occurs before or during a Timer
Recording, even after power is restored.
Adjust TRACKING control in either direction. (BO p. 4)
Try Head Cleaning. (BO p. 4)
Make sure VCR LOCK is set to off. (AO p. 5)
Make sure unit is not in a Timer Record operation.
Remote Control
CORRECTION
Unit cannot be controlled...
Aim remote at remote sensor on unit (BO p. 9) so that signal is
unobstructed.
Inspect the remote batteries. (BO p. 4)
Make sure VCR LOCK is set to off. (AO p. 5)
Exposing unit remote sensor to direct fluorescent or outdoor light
may cause signal interference.
ACTION and PROG buttons
cannot be selected...
Check remote batteries.
Miscellaneous
Video cassette cannot be
inserted...
Video cassette cannot be
removed...
Tape cannot be ejected or
inserted...
Video cassette ejects when a
recording is started, or the
power is turned off for timer
recording...
In Stop mode, the VCR motor
(CYLINDER) continues to
rotate...
VCR cannot be controlled...
For Basic operations, see the separate “Basic Operations” instruction book.
Table of Contents
CORRECTION
Insert the cassette window side up; record tab facing you.
Completely insert Power Plug into an AC outlet.
Try ejecting or inserting the tape again after turning POWER off,
then back on.
Make sure cassette record tab is intact. (BO p. 4)
To enable Quick Play mechanism, the VCR cylinder will rotate for
about 3 minutes. This reduces response time from Stop to Play
mode and from Play to Rewind Search mode.
Make sure VCR LOCK is set to off. (AO p. 5)
TV Features .......................................................................................................2
Closed Caption System .....................................................................................3
VCR Features ....................................................................................................4
V-Chip Control Features ....................................................................................6
Copy Your Tapes (Dubbing) ..............................................................................9
Reset Language, Channels, Clock, Time Zone Adjust ....................................10
Warning and Instruction Displays ....................................................................11
Before Requesting Service ..............................................................................12
As an ENERGY STAR® Partner,
Matsushita Electric Corporation of America has determined
that this product or product model meets the ENERGY STAR®
guidelines for energy ef¿ciency.
CHANNEL 08 DELETED
Division of Matsushita Electric of Puerto Rico, Inc.
Ave. 65 de infantería. Km. 9.5 San Gabriel Industrial Park, Carolina, PR 00985
(787) 750-4300
Please read these instructions carefully before attempting to connect,
operate, or adjust this product. Please save this manual.
Printed in Indonesia
LSQT0839 A
S0504-0
-8-
Combination VCR
Operating Instructions (Advanced Operations)
CORRECTION
Completely insert Power Plug into an AC outlet.
Set POWER button ON.
SET CLOCK
Government Marketing Department:
52 West Gude Drive, Rockville, MD 20850 (301) 738-3840
Panasonic Sales Company
If you press STOP during a Timer Recording...
Power
1/ 4/2004 SUN 12:00AM
DST:ON
-----------------------
Select channel with number keys and press
ADD/DLT.
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 624-5010
TO CANCEL TIMER REC
HOLD DOWN STOP KEY
FOR APPROX 3 SEC
SET CLOCK
(If select “MANUAL”)
STOP
Matsushita Electric Corporation of America
Corporate Sales Group, Hawaii Region
99-859 Iwaiwa ST., Alea, Hl 96701-3267 (808) 488-7779
Press Ÿź to
select “TIME
ZONE
ADJUST,”
0
„ To add channel
Western Zone:
3330 Cahuenga Blvd W, Los Angeles, CA 90068 (323) 436-3500
2
If you press REC, and a cassette is inserted with See pages 4 and 7 of
no record tab...
Basic Operations book
(BO: refers to “Basic Operations” Instruction book.)
(AO: refers to “Advanced Operations” Instruction book.)
Before Requesting Service
5
EXIT
CHECK CASSETTE
RECORD TAB
Reset Language, Channels, Clock, Time Zone Adjust
Press STOP to stop dubbing.
CLOCK
AUTO CLOCK SET
MANUAL
TIME ZONE ADJUST : 0
Panasonic Broadcast & Television Systems Company
Division of Matsushita Electric Corporation of America
5
See page 7 of Basic
Operations and see page
2 of Advanced Operations
book.
SET CLOCK
4
Eastern Zone:
One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621
Central Region:
1707 N Randall Road E1-C-1, Elgin, IL 60123 (847) 468-5200
CH
(“TIME ZONE ADJUST”
appears only when auto
clock is set.)
SET:
Broadcast & Digital Systems Company
Executive Of¿ce:
One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7000
LOCK LANGUAGE
Press Ÿź to
select
“MANUAL” or
“AUTO CLOCK
SET” and press
Ź.
SELECT:
END
:ACTION
SALIR
ELEGIR:
FIJAR :ACTION
TELE
CLOCK
TV
SELECT:
SET
:ACTION
ANTENNA : TV
AUTO SET
WEAK SIGNAL DISPLAY:ON
BLOQUEO IDIOMA
CANAL
MAIN MENU
SET UP CHANNEL
For English
• See “Selecting Input Mode” (p. 6 of Basic Operations
book.)
1
Press ŸźŻŹ to select
“CLOCK,” and press ACTION.
LOCK LANGUAGE
SELECT:
SET
:ACTION
MAIN MENU
2
If you attempt to set or review a Timer
Recording, or set the On-Timer and the Clock is
not set...
Time Zone Adjust
(Only when Auto Clock
is set.)
MAIN MENU
LOCK LANGUAGE
CH
Clock
Copy Your Tapes (Dubbing)
IN
PLEASE SET CLOCK BY
PRESSING ACTION KEY
Language
VIDEO IN FROM ANT.
Page
Check the following points once again if you are having trouble with your unit.
Warning and Instruction Displays
AUDIO
OUT
CAUTION
EXIT
SELECT:
SET
:ACTION
Playing (Source) VCR
Before Requesting Service
LSQT0839 A
This operating instruction book is designed for use with models AG-513G
and AG-520G. Illustrations in this manual show the AG-520G.
-9-
-10-
-11-
-12-
Press ŸźŻŹ to select “TV,” and press
ACTION.
1
2
LOCK LANGUAGE
Press Ÿź to select “ON TIMER,” and
press Ź to display ON TIMER screen.
2
Press ACTION to display menu.
Closed Caption narration is displayed when
MUTE button is pressed for silence.
Press ŸźŻŹ to select “TV,” and
press ACTION.
1
Do steps 1~3 at left.
2
Press Ÿź to select “CAPTION
MODE,” and press Ź repeatedly to
select “OFF.”
MAIN MENU
SET PROGRAM
CH
CLOCK
EXIT
TIMER PROGRAMMING
ON TIMER
SELECT:
SET
:ACTION
3
Press Ÿź to select “VIDEO ADJUST,”
and press Ź.
SELECT:
END
:PROG
3
SET UP TV
:TUNER
Press Ÿź to select desired settings,
and press Ź to set the ON-TIMER time
and ON-TIMER mode.
3
EXIT:SEARCH
SELECT:
END
:ACTION
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
• ON-TIMER mode
selection order
:TUNER
3
:T-120
SET:
CH02
CH03
CH125
CAPTION
OFF
To Make Corrections, use Ÿź and ŻŹ to
move back and correct.
SELECT:
END
:ACTION
CAP C1
TEXT C2
SELECT:
END
:ACTION
„ PICTURE Control
• “ON TIMER SET” is displayed.
• ON TIMER Indicator lights on unit.
ON TIMER
10:00AM CH 05
„ SHARPNESS Control
Adjust picture sharpness.
CANCEL:ADD/DLT
SELECT:
SET:
END
:PROG
To Cancel ON-TIMER,
Repeat steps 1 and 2. Then, press ADD/DLT to
clear the time in step 3. Now, press PROG to end.
“ON TIMER END” briefly appears on-screen.
This unit can be set for auto power off.
Press SLEEP repeatedly to set SLEEP TIMER.
Press ACTION three times to exit.
• Pressing DISPLAY with sleep timer set displays remaining
time.
SET:
Playback:
Start playback, and do above steps to select
desired caption mode.
1
2
3
4
5
6
7
Repeat Play
Set to see a recording over and over.
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
2
3
4
5
6
PLAY
REPEAT ON
SLEEP TIMER 90
LOCK LANGUAGE
CH
CLOCK
Note:
3
Weak Signal Display ON/OFF
When set to “ON,” picture is displayed
regardless of signal strength.
In PLAY mode, press
PLAY/ REPEAT on unit
to turn “ON.”
• If VHS-C type cassettes, tapes under 30 minutes,
tapes over 180 minutes, or incompatible tapes are
used.
• If the correct tape length is not selected.
(See “Tape Select” section above.)
1
Repeat above to turn
“OFF.”
1
Press ACTION to display menu.
2
Press ŸźŻŹ to select “CH,” and
press ACTION.
MAIN MENU
Press TAPE POSITION to detect tape
position.
DETECTING TAPE POSITION
TV
LOCK LANGUAGE
CH
CLOCK
EXIT
SELECT:
SET
:ACTION
• “DETECTING TAPE
POSITION” only
appears the first time a
cassette is inserted
and it takes several
seconds for correct
indication to appear.
3
Press Ÿź to select “WEAK SIGNAL
DISPLAY,” and press Ź to set “ON”
or “OFF.”
SET UP CHANNEL
• If Index Search is started very close to an index mark, that
index mark may not be counted in the search.
ANTENNA : TV
AUTO SET
WEAK SIGNAL DISPLAY:ON
Note:
SLP
• Play repeats at tape end or if unrecorded position over
30 sec. is detected.
R 120 MIN.
BEGIN
END
• The present tape
position indication and
amount of tape
remaining (according
to tape speed) is
displayed. Tape
remaining time display
may not be precise.
SELECT:
END
:ACTION
Notes:
• ON: Picture is displayed even if signal is very weak
but quality may be poor.
OFF: Screen turns solid blue when signal is weak or
non-existent.
• Selecting “ON” has no effect on connected equipment
with blue back feature.
Commercial Skip
2
Unit fast forwards (skips) over 1, 2, or 3 minutes of
recorded tape as desired.
SET:
Press TAPE POSITION to return to
normal screen.
Press CM/ZERO in Play mode.
4
• Press CM/ZERO repeatedly to change skip time as
shown below.
• No indication appears.
Press ACTION twice to return to
normal screen.
CH 08
Press Ÿź to select “US TV
PROGRAMS,” and press Ź to set
“ON” or “OFF.”
PROGRAM RATING EXCEEDED
RATING:PG-13
ACCESS CODE
2
Press Ÿź to select “CHANGE
SETTINGS,” and press Ź.
• Take care that you are not
observed entering the
secret code.
US MOVIES
:OFF
CHANGE SETTINGS
US TV PROGRAMS
:OFF
CHANGE SETTINGS
NEXT PAGE
SELECT:
END
:ACTION
„ To View a Blocked Program / Movie
[Temporarily Deactivate V-Chip Control]
Enter your secret code (ACCESS CODE) in the
Blocking Message screen.
SET:
• V-Chip Control is reactivated when power is turned
off or power failure occurs.
„ “ON” Ö V-Chip Control is activated.
„ “OFF” Ö V-Chip Control is deactivated.
[Deactivate V-Chip Control]
Enter your secret code (see page 6). Then, set
US MOVIES and/or US TV PROGRAMS to
“OFF” using Ÿź and Ź. (Ratings set is retained
and will be in effect when V-Chip Control is
activated again.)
Note:
• “NEXT PAGE” displays CANADIAN V-Chip menu.
Not necessary except Canadian tapes or broadcasts.
2
Press Ÿź to select “CHANGE
SETTINGS,” and press Ź.
3
Press Ź to display US Ratings menu
(see at right).
Or
Press ACTION twice to exit.
VIEW NR PROGRAMS? : YES
G
UNLOCKED
PG
PG-13
R
NC-17
X
CONTAINS NO RATING
LOCK
CONFIRM 4-DIGIT CODE
SELECT:
END
:ACTION
„ Changing your secret code
• You will need your current code. Perform steps 1~3. In
step 4, press ADD/DLT to clear current code. Repeat
steps 3 and 4 to enter new code.
• DO NOT forget your secret code.
• Once ratings are set, restricted tapes or programs cannot
be accessed unless the secret code is entered.
Press Ÿź to select “VIEW NR
PROGRAMS?,” and press Ź to set
“YES” or “NO.”
VIEW NR PROGRAMS? : YES
TV-Y
UNLOCKED
TV-Y7
FV
TV-G
TV-PG
TV-14
V
S
L
D
TV-MA
V
S
L
CONTAINS NO RATING
SELECT:
SET:
END
:ACTION
NR (Not Rated) PROGRAMS
Some movies, such as old movies or foreign movies
have no ratings.
4
4
Press Ÿź to select and Ź to set
ratings. (See ratings chart on page 7.)
SELECT:
END
:ACTION
5
US TV PROGRAMS RATINGS:
Chart 1
FOR ALL CHILDREN:
TV-Y Content specifically geared to young viewers
ages 2-6.
FOR AGE 7 AND OLDER:
TV-Y7 May contain mild physical or comedic
violence which may frighten children under 7.
GENERAL AUDIENCE:
TV-G Contains little or no violence, strong
language, or sexual dialogue or situations.
PARENTAL GUIDANCE:
TV-PG May contain infrequent coarse language,
limited violence, some suggestive sexual
dialogue and situations.
PARENTS CAUTIONED:
TV-14 May contain sophisticated themes, sexual
situations, strong language, and more intense
violence.
MATURE AUDIENCE:
TV-MA May contain mature themes, profane
language, graphic violence, and sexual
situations.
Press Ÿź to select and Ź to set
ratings. (See ratings charts at right.)
• Ratings highlighted in Green will be blocked.
Ratings in white letters will not be blocked.
VIEW NR PROGRAMS? : YES
TV-Y
UNLOCKED
TV-Y7
FV
TV-G
TV-PG
V
S
L
D
TV-14
V
S
L
D
TV-MA
V
S
L
FOR ALL CHILDREN
SELECT:
SET:
END
:ACTION
SET:
Press ACTION to continue with US TV
PROGRAMS Ratings (see page 7).
Or, press ACTION three times to exit.
G
SET:
NR (Not Rated) PROGRAMS
Some TV shows, such as news, sports, weather,
bulletins, emergency information have no
ratings.
VIEW NR PROGRAMS? : YES
G
UNLOCKED
PG
PG-13
R
NC-17
X
GENERAL AUDIENCE
Notes:
3
SET:
RECOGNIZED
CHANGE CODE:ADD/DLT
CONTINUE:
END
:ACTION
SELECT:
END
:ACTION
SET:
Press Ÿź to select “VIEW NR
PROGRAMS?,” and press Ź to set
“YES” or “NO.”
GENERAL AUDIENCE:
All ages admitted.
PARENTAL GUIDANCE:
PG Some material may not be suitable for
children.
PARENTS CAUTIONED:
PG-13 Some material may be inappropriate for
children under 13.
RESTRICTED:
R
Children under 17 must be accompanied by
a parent or adult.
OVER AGE 17 ONLY:
NC-17
No one 17 and under admitted.
X
ADULTS ONLY:
US MOVIES
:OFF
CHANGE SETTINGS
US TV PROGRAMS
:OFF
CHANGE SETTINGS
NEXT PAGE
US MOVIES
:OFF
CHANGE SETTINGS
US TV PROGRAMS
:OFF
CHANGE SETTINGS
NEXT PAGE
To Make Corrections,
Press Ż repeatedly to move the cursor, and press
Number keys to make the correction.
US MOVIES RATINGS
LOCK
LOCK
SELECT:
END
:ACTION
Note:
• You may select from standard TV ratings (chart 1), or
customize to a specific content rating (chart 2).
5
Press ACTION three times to exit
this mode.
US TV PROGRAMS RATINGS:
Chart 2
-5-
FV
V
S
L
D
-6-
-7-
Fantasy Violence
Violence
Sexual Situations
Adult Language
Sexually Suggestive Dialogue
US TV PROGRAMS
RATINGS: Chart 2
Weak Signal Display
ON/OFF
-4-
----
• If a program or movie
exceeds the ratings you
have set, a message will
appear and sound is
muted.
ENTER :0-9
• “NEXT PAGE” displays CANADIAN V-Chip menu. Not
necessary except Canadian tapes or broadcasts.
Press NUMBER keys to enter your
secret code, and enter same code again
for confirmation.
ENTER :0-9
END
:ACTION
4
<When V-Chip Control is activated>
SET:
„ “ON” Ö V-Chip Control is activated.
„ “OFF” Ö V-Chip Control is deactivated.
Blocking
LOCK
US MOVIES
:OFF
CHANGE SETTINGS
US TV PROGRAMS
:OFF
CHANGE SETTINGS
NEXT PAGE
EXIT
LOCK
Tape Position and Tape Status Display
Press Ÿź to select “US MOVIES,” and
press Ź to set “ON” or “OFF.”
SELECT:
END
:ACTION
TV
1
Setup
Blocking Message
Setup US TV PROGRAMS Ratings
LOCK
Press ŸźŻŹ to select “LOCK,” and
press ACTION.
ENTER 4-DIGIT CODE
Caption On Mute Feature
-3-
Press ACTION to display menu.
SELECT:
SET
:ACTION
Press ACTION twice to return to
normal screen.
7
Note:
1
SLEEP TIMER 0
2
1
VCR Lock
• The closed caption or text signal may be broadcast
over C1, C2, or both. Also, text contents can vary so
you may wish to try different settings.
• VCR Lock cancels in 24 hours.
• Select “T-120” for
tapes 120 minutes or
less, “T-160” if 140 or
160 minutes, and
“T-180” if 180 minutes.
Tape position is displayed incorrectly in the
following cases:
PLAY
REPEAT OFF
SLEEP TIMER 60
-2-
:T-120
NOTE:
indicates start points of each recording.
Closed Caption / Text narration will not be
displayed.
Record:
Record normally. Closed Caption/ Text
signal is recorded automatically.
Note:
:TUNER
To find out present tape position and amount of
tape remaining.
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
„ OFF
Note:
SLEEP TIMER 30
„ To Calculate Index Number
1
„ Recording and Playing Back a
Closed Caption/Text Program
1
----
• Unit will go into FF or REW mode and stops at the last
point the Counter was set to 0:00:00.
The lower half of the screen will be blocked
out. When the TV station broadcasts
information, such as program listings, it will
appear in this space.
Press ACTION three times to exit.
T-180
Blocking
Enter Code
US TV PROGRAMS
RATINGS:Chart 1
To cancel,
press SLEEP repeatedly until “SLEEP TIMER 0”
appears.
„ TEXT C1 or TEXT C2
SELECT:
END
:ACTION
T-160
Setup
Setup US MOVIES Ratings
MAIN MENU
Tape Position Display
Sleep Timer
SET:
Press CM/ZERO in Stop mode to start
ZERO SEARCH.
T-120
Enter Code
A 4-digit code must be entered to view a blocked
program or change rating settings.
FORWARD SEARCH :FF
REVERSE SEARCH :REW
Press ACTION three times to exit.
• To cancel, press MUTE again.
A narration of selected TV programs is
displayed. Check TV program listings for CC
(Closed Caption) broadcasts.
CAPTION
INPUT SELECT
VIDEO ADJUST
TAPE SELECT
Blocking
Enter Secret Code
Press Ÿź to select “TAPE
SELECT,” and press Ź to set
“T-120,” “T-160” or “T-180.”
SET UP TV
4
SET:
Press MUTE to mute the sound and
display closed captioning.
To turn off,
repeat above.
VCR LOCK OFF
-1:23:45
Closed Caption Mode Feature
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
„ CAP C1 or CAP C2
5
Press STOP.
3
INDEX SEARCH
SET:
5
EXIT
If LOCK menu is not displayed, do “Enter Secret
Code” steps on page 6.
Setup
Blocking
US MOVIES RATINGS
To Reset Picture Controls,
press Ÿź and Ź to select and set “NORMAL.” All
controls return to their factory settings.
CLOCK
Tape Select
Adjust picture intensity by adjusting both contrast
and color level in the proper balance.
Press PROG to set ON TIMER.
CH
Enter Code
Setup
Blocking Message
Adjust picture brightness.
5
• To cancel, press PLAY.
CAP C1
Sleep Timer
4
„ BRIGHTNESS Control
4
5
TEXT C1
„ TINT Control
Adjust for natural flesh tones.
Continue to record, playback, etc.
CAP C2
4
Adjust color intensity.
LOCK LANGUAGE
To turn on,
hold down REC on the
unit in Stop mode with
no tape inserted for 7
sec.
(Please ignore the NO
CASSETTE warning.)
Enter Code
If LOCK menu is not displayed, do “Enter Secret
Code” steps at left.
Repeat Play
CAPTION MODE : CAP C1
CC ON MUTE
: NO
NO
Play begins at search end. To search
forward or back 1 index, press FF or
REW while screen below is displayed
(10 sec.).
CAP C2
„ COLOR Control
SELECT:
END
:ACTION
Press Ÿź to select “CC ON MUTE,”
and press Ź repeatedly to select a
mode. (See below.)
2
3
CAPTION MODE : OFF
CC ON MUTE
: CAP C1
Press Ÿź to select “CAPTION
MODE,” and press Ź repeatedly to
select mode. (See below.).
CH01
PLAY
SELECT:
ADJUST:
END
:ACTION
SET:
CAPTION
4
TV
SELECT:
SET
:ACTION
FORWARD SEARCH :FF
REVERSE SEARCH :REW
SET:
• Make sure a tape is inserted if Playback mode is
selected.
MAIN MENU
ENTER INDEX NUMBER :1
USING 1-9 KEYS
CAPTION MODE : OFF
CC ON MUTE
: CAP C1
SET UP TV
SELECT:
END
:ACTION
SELECT:
END
:PROG
VCR LOCK ACTIVATED
Press Ÿź to select “TV,” and press
ACTION.
0:00:00
Press FF or REW to start search.
CAPTION
10:--AM CH --
Press Ÿź to select an adjustment item
(see below.), and press ŻŹ to adjust.
2
Press ACTION to display menu.
INDEX SEARCH
EXIT
Press Ÿź to select “CAPTION,” and
press Ź.
CAPTION
INPUT SELECT
VIDEO ADJUST
TAPE SELECT
1
2
This unit has a built-in V-Chip Control which allows you to block unwanted TV usage based on US MOVIES
and US TV PROGRAMS Ratings.
Setup US TV PROGRAMS
Ratings
4
SET:
CLOCK
SELECT:
SET
:ACTION
SET:
ON TIMER
SELECT:
END
:ACTION
CH
Press COUNTER RESET at the desired
position to reset to “0:00:00.”
1
Press SEARCH in Stop or Play mode,
and then press NUMBER keys to select
recording number.
All operations are prohibited except Timer
recording and tape eject. Useful for families with
small children.
Zero Search
:T-120
LOCK LANGUAGE
Press COUNTER RESET during play to
display Counter.
To quickly return to a specified tape location.
1
VCR Lock
Select your tape length so the tape position and
amount of tape remaining is properly displayed.
(See “Tape Position and Tape Status Display”
section below.)
For each recording, an invisible index mark is placed
on the tape. A program index and information and
also included for Timer recordings. These marks are
used to access or Scan recording.
• To calculate number, see below.
ON-TIMER
CAPTION
INPUT SELECT
VIDEO ADJUST
TAPE SELECT
TV
Tape Select
V-Chip Control Feature (continued)
Setup US MOVIES Ratings
TV
1
Caption On Mute Feature
Zero Search
Commercial Skip
MAIN MENU
Press PROG to display SET PROGRAM
screen.
Closed Caption Mode Feature
Index Search
V-Chip Control Features
Enter Secret Code
2
This unit can be set to automatically power on in
one of 2 modes (TV, Playback).
VCR Features (continued)
Index Search
Press ACTION to display menu.
This multi-use system not only allows the hearing impaired to enjoy selected programs, but also
makes useful information from TV stations available to everyone.
ON-TIMER
Picture Adjustment
Picture Adjustment
1
VCR Features
Closed Caption System
TV Features
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement