Panasonic NVHD605 Operating instructions

Panasonic NVHD605 Operating instructions
= - "
Video Cassette Recorder
NV-H D605 Series
Operating Instructions
7 E + Se
77 Rie > = ой
7 EA
2 varesot- т .
VHS SUPER DRI VE
MULTE-INTELUGENT CONTROL
Before attempting to connect, operate or adjust о
this product, please read these instructions
completely. _
Dear Customer
May we take this opportunity to thank you for purchasing Crystal View Control
this Panasonic Video Cassette Recorder. introducing Crystal View Control, and innovative new
We would particularly advise that you carefully study the technology for high picture quality. This technology uses a
Operating Instructions before attempting to operate the CVC microprocessor 10 intelligently control the relationship
unit and that you note the listed precautions. _ between the tape heads and circuitry, bringing out the _
maximum performance of each. The result is consistently
Auto Setup optimum picture quality.
Connect the aerial lead and the mains lead. ‘PDC (Programme Delivery Control)
(See page 12.) HLT
time of programmed timer recordings.
[ Turn оп the VCR. I — PDC is particularly useful when the broadcaster changes ._.
To На 1 the time for a programme from the published time. the
VCR's timer recording start and stop time will be
controlled by the broadcaster, e.g. when the programme is
delayed or extended. Recording can also be interrupted
by the broadcaster, e.g. news flash, and resumed when
Auto Setup is finished.
Video Pius+ Programming System
Programming is now easier than ever: simply enter the the programme restarts.
PlusCode provided in the programme schedule column At present PDC transmission does not cover ali areas and
carried by newspapers and magazines. Stations in the UK, please check with the broadcasters in.
Video Plus+ and PlusCode are trademarks of Gemstar your area for details.
Development Corp. Video Plus+ system is
manufactured under license from Gemstar Development
Corporation.
EU Is PS e Ml
rr
tri
an
(2)
| ale ai ИННЫ:
E в a Ed
lee E io
FRADAR.T À NT
TETE: "ELE JFLIVN
Your attention Is drawn to the fact that
the recording of pre-recorded tapes or
discs or other published or broadcast
material may intringe copyright laws.
WARNING
TO REDUCE THE RISK OF FIRE OR
SHOCK HAZARD, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR
MOISTURE.
FOR YOUR SAFETY
E DO NOT REMOVE OUTER COVER.
To prevent electric shock, do not remove
cover. No user serviceable parts inside. Refer
o a mh mle OT
servicing to qualified service personnel.
mn
SUN
Contents
Caution forACMainslead ......._............. 4
Unpacking ............... e rresxeecrera. 5 —
Infra-red Remote Controller ................... 6
Controls and Connection Sockets .............. 8
Connections ...... CE 12
Tuning the TV to your VCR | aera 14
Auto Setup ..... Err ee eae aae esas aaa 15
ln e - = - a ) |
Basic Operations
Playback ........... ee. - 18.
Manual Recording ........................... 20
Timer Hecording ................ ccc RAR 24 . ...
e Using On Screen Display ..............—.—... a ZA _-—
e Programming the Video Plus+ PlusCode ......... 256...
Editing .................... Lea aa eee 2220 e 27 =
e Assembly Editing LK a AR 27
OtherFunctions ......... ................... 28
Storing TV Broadcasts Into your VCR ........... 30
Settings Using On Screen Display .............. 33
Setting the Clock of your YCR ..............., 35
Help inte
Before Requesting Service .................... 38 — =
Precautions ................ ... .. EEE 41
Specifications . . .............. вин к кака. 42
(3)
EE _— = —
E —— :—— -
LT wm area. жет неон еее =
Caution for AC Mains Lead
1
1
Il
For your safety please read the following text ~~ How to replace the Fuse
carefully | о e There are two types of the AC Mains Lead
This appliance is supplied with a moulded three pin assembly: @ and 6) as shown below.
mains plug for your safety and convenience. a
A 5 amp fuse is fitted in this plug. 1 Open the fuse compartment with a screwdriver.
Should the fuse need to be replaced please ensure 2 Replace the fuse and fuse cover.
that the replacement fuse has a rating of 5 amps and
that it is approved by ASTA or BSI to BS 1362.
= Check for the ASTA mark ¿y or the BSI mark Y on
the body of the fuse.
If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used
unttl a replacement cover is obtained.
A replacement fuse cover can be purchased from
your local Panasonic Dealer.
IF THE FITTED MOULDED PLUG IS UNSUITABLE
FOR THE SOCKET OUTLET IN YOUR HOME THEN
THE FUSE SHOULD BE REMOVED ANDTHE 7
PLUG CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
CLM, IE TLE MIT AE Fail LA A RATO PP ET TA TO
MEET TT! he aH 0. В
ORE he RH
“HAL
E
fe
SACCK IF THE CUT OFF PLUG IS INSERTED IN
ANY 13 AMP SOCKET.
If a new plug is to be fitted please observe the wiring
code as shown below.
If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in
accordance with the following code:
Biue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug.
proceed as follows:
The wire which is coloured BLUE must be connected
to the terminal in the plug which is marked with the
_ letter N or coloured BLACK.
The wire which is coloured BROWN must be
connected to the terminal in the plug which is marked
with the letter L or coloured RED,
EOS] E
|
va NN hdd Jt)
wh
pe
Jl
Pindar ma cieniimetarnmza child ads af hanna А м
Ta? AGE IE NE A LATE Ps UE AREA IE IS] RAT RI ICAIC YY II с
be connected to the earth terminal of the three pin
a 1 " 1 и
CLE yal
(4)
Unpacking
Check and identify the supplied accessories, and then set up this VCR after reading
“Setting Up”.
+]
| = |
ТЕ —
Ш [] [I | o В
RF coaxial cable for Batteries for the Remote controller
connecting between this remote controller (1 pc.)
VCR anda TY (1 pc.) (2 pcs.) EUR571355
VJA0728-A or VJAO963 UM3 or RE type
TT | ола
1
AC mains lead (1 pc.)
VJAQ733 or VJAO733-A
(5
(6)
1 POWER (TV)
To switch the TV from on to standby mode or vice
versa. In standby mode. the TV is still connected to
the mains.
NAJERA enma TA mandale E may
las la Ela las $e
TELE QUIZ OV LI ANI. 11 J
ay Cry ossible Lt
switch the TV to standby mode using this button.
In this case, use TV/AY or Y A (TV to switch to
TV on.
2 TV/AV
To select the TV input.
a
TJ
3 Programme Position Selector Buttons
® То select the programme positions (1-99).
9: 9)
19: - 1-0)
e To enter a PlusCode.
4
5
6
AUDIO OUT
To select the desired sound mode. oo
At the every push cf this button, the audio output
mode changes as follows.
Stereo Left— Right— Normal audio track-—
The Left (L) and Right (R) indicators shown which
sound mode is selected in the following way.
Stereo: Both the L and R indicators appear.
Left: The L Indicator appears.
Right: The R Indicator appears.
Normal: Both the L and R indicators don't appear.
MENU
To make On Screen Display Main Menu appear on
the TV screen.
A Y «>
To make selections from On Screen Display.
7 CANCEL
To cancel the settings made for a timer recording.
8 POWER (YCR)
11
12
13
14
15
To switch the VCR from on to standby mode or vice
versa. In standby mode, the VCR is still connected to
the mains.
OSD
For the On Screen Display Function.
REW (REWIND)
In the stop mode: To rewind the tape.
in the playback mode: To search backward.
In the rewind mode: To obtain high speed picture,
“<i<T" is lit.
PLAY
To start playback. “I>" is lit.
STOP
To stop any playback or recording.
PAUSE/STILL
During playback: Still picture.
During recording: To interrupt recording.
SLOW
For the slow motion playback function. “IE>” is it
SP/LP
— To Select the tape speed desired for recording.
16
17
AD mac ha hack nat ra ra mias
"| Y ra LN SIA jar Pita рык у,
LP gives the longest recording time.
REC
To start a recording.
FF (FAST FORWARD)
In the stop mode: To fast forward the tape.
In the playback mode: To search forward.
In the fast forward mode: To obtain high speed
picture.
“DD>” js Hit.
18 RESET
To reset the tape counter {elapsed time) to "0:00.00".
e The tape counter is automatically reset to “0:00.00”
ca ala Aaa a ar . =
WIESE A VILO COEL E LES 1 DCI LIEU.
19 STORE
To make selections from On Screen Display.
20 DISPLAY
To change ihe indication on the VCR Display.
> Clock— Counter— Remaining Tape Time —
——?!
21 TRACKING/V-LOCK
To adjust the tracking and the vertical locking.
{See page 19.)
22 EXIT
To make On Screen Display disappear on the TV
screen.
23 Y A (VCR)
To select the required programme position (TV
station) of the VCR.
24 TIMER REC
To turn the timer recording function an and off.
[A] is lit or not lit.
Once operating timer recording function, the normal
VCR operation is not possibie uniess this buticn is set
to off.
25 VIDEO PLUS+
For the programming the Video Plus+ PlusCode.
26 vv > (ТУ)
To select the required programme position {TV
station} of the TV.
27 VOLUME
To adlust the volume of the TV.
28 infra-red Transmitter
Power Source for the Remote Controller
The remote controller is powered by 2 "АА", "ОМЗ" ог “Аб”
size batteries. The life of the batteries is about one year,
although this depends on the frequency of use.
Precautions for Battery Replacement
ol oad the new batteries with their polarity (& and 55)
aligned correctly.
#Do not apply heat to the batteries, or an internal
short-circuit may occur.
elf you do not intend to use the remote controller for a
long period of time, remove the batteries and store them
in a cool and dry place.
e Remove spent batteries immediately and dispose of
them.
e Do not use an old and a new battery together, and never
use an alkaline battery with a manganese battery.
Installing the Batteries
Manufacturers Settings
Panasonic televisions can be operated with the provided
remote controller.
First, confirm that the television can be operated correctly.
if the television does not operate correctly, press the
TY/AY bution whiie pressing ine FOWEHR (VCR) bution.
To return to the original settings, press ine POWER (TV)
button while pressing the POWER (VCR) button.
7)
(8)
Controls and Connection Sockets
This gives a detailed explanation of the function of each button, switch and connection socket.
©
т
HF
dr
т
Sr
PF
7 e
AE À
‚1000000007 = A i |
DODDOGDODE |; ры -à |
= NA
av L Au |
dpousca (a
|
POWER (BA
Press to switch the VCR from on to standby mode or
vice versa. In standby mode, the VCR is still
connected to the mains.
EJECT
To eject a video cassette.
Cassette Compartment
Insert a video cassette here.
REW (REWIND)
In the stop made: To rewind the tape.
In the playback mode: To search backward.
In the rewind mode: To obtain high speed picture.
"<<" is lit.
PLAY
To start playback. “>” is lit.
Standby Indicator
This indicator is lit when the VCR is turned off or the
VCR is timer recording standby mode. a
(O CVC (Crystal View Control)
ON: The CVC function continually monitors tape
characteristics for optimum picture guality.
eo The CVC indicalor is iit on the VCH dispiay.
e This control should normally be left in the
ON position.
Tum off the CYC function.
eThe CVC indicator is not fit.
Infra-red Remote Control Recelver Window
OFF:
Display
VA
To select the required programme position (TV
station).
REC
To start à recording.
TIMER REC
To turn the timer recording function on and off.
[is lit or Trot fit.
Once operating timer recording function, the normal
VCR operation is not possible unless this button is set
to off.
{ stor
To stop any piayback or recording.
9 e 600
@ FF (FAST FORWARD)
ео 6 6 ©
In the stop mode: To fast forward the tape.
In the playback mode: To search forward.
in the fast forward mode: 70 obtain high speed.
picture.
“>>” is lit,
AV1
This 21-pin scart terminal carries input and output
signals for both picture and sound. TV sets equipped
with a similar socket can be connected here.
This is also called Scart
Peritel
Euro Connector
Euro AV
20 18 8 14 12 9 6 & 2 2
( ;
\ DO |
21 {> Cpesahqhebesdnaheheés [
\
19 17 TE ‘3 11 8 7 E 3 1
1 AUDIO OUTPUT CH? (R) 13 RED GROUND
2 AUDIO INPUT CH2 (R) 14 BLANKING
3 AUDIO OUTPUT CH1 (L) GROUND
4 AUDIO GROUND 15 RED
5 BLUE GROUND 16 BLANKING
6 AUDIO INPUT CH1 (L) 17 VIDEO OUTPUT
7 BLUE GROUND
8 SWITCHING VOLTAGE 18 VIDEO INPUT
9 GREEN GROUND GROUND
10 No connection 19 VIDEO OUTPUT
11 GREEN 20 VIDEO INPUT
12 No connection 21 GROUND
Caution: RGB reservation for only EE operation
when connecting the Pay TV decoder
RF OFF/TEST SIGNAL
RF OFF: Set to this position when the VCR is
connected to the TV via the 21-pin scart
cable.
TEST SIGNAL OFF;
Set to this position when the VCR is
connected to the TV via the RF coaxial
cable only.
TEST SIGNAL ON:
Set to this position when tuning the TV into
the VCH.
The test signal is transmitted on channel
36 initially,
RF IN
To connect io the external aerial.
AC IN—
To connect to the main power supply.
Av?
Tao connect to a decoder, another VCR or a satellite
recelver.
AUDIO OUT
To connect the sound to a stereo audio system.
E) CH ADJ.
To adjust the AF transmitting channel 30-42.
€ RFOUT
To connect to the aerial terminal on à TV set.
(9)
(10)
Connections
This tells you how to connect with an aenal, TV, etc.
Setting Up
Tuning the TV to your VCR |
The VCR supplies a signal to the TV set via the RF
coaxial cable on channel 36 of the UK broadcasting
system. Your TV must be tuned into this channel in order
to view the VCR playback picture.
If the connection to the TV includes the 21-pin scart cable,
+ ое а ча вк ие к ha ica Par calartiar AV AR
LI LG FIL BALLIN Jr Lal ся TAAL] Y Y Y A A у PT SP kEi yd aw Wil
your TV. The RF coaxial cable must still be connected as a
shown on page 12, but the TV need not be tuned to
channel 36.
nian er EY oC ATE
Auto Setup
When the VCR is turned on after connecting the aerial
lead and the mains lead, Auto setup (Auto tuning and Auto
clock setting) starts.
(11)
Connections
This tells you how to connect with an aerial. TV, etc.
ES om o 7 о a
Basic Connections
The following connections are required to record and play
K h TV set:
back the VCR throug se TV Set (Not supplied) Aertat
и = ny
(Not supplied) |
- СЛ | —
1
oa. \fanocuaacy ; ;
>] |
1. Е La — I 1}
a
Je
|") |
To mains supply J | 3
Connection to a TV Set with 21-Pin Scart Terminal
TV Set (Not supplied) aarial (Not supplied)
o Ne a ,
1
]
1
Note:
сэ и РЕ РС Се CIAT CANTAS
DOT OD AAA JPL Wil
Switch to "OFF" position only if
interference beat occurs, then viewing via
21-pin scart connection only.
Aeria! Connector
2
Scart Terminal >
(Not supplied)
il NE 1 IL — 3 —
©
4
To mains supply
Stereo Amplifier |
(12) e Connection to a Stereo Amplifier
Connection to a Decoder
TV Set (Not supplied) Aerial (Not supplied)
Aenal Connector
pm Ny
Setting Up
Decoder (Not supplied)
21-Pin Scart
Terminal
ke
am
21-Pin Scart Terminal
(Not supplied)
106506202770
Sata
130330
(Not supplied)
Notes:
e"RGB” is an abbreviation for "RED/GREEN/BLUE"
signals. If the TV with RGB input capability is connected
to AV1 and the unit with RGB output capability is
connected to AV2, the TV can receive RGB signal from
the unit through the VCR.
e Use full-wired 21-pin AV cables for the connection,
e Selection of RGB or normal video output is done by the
external equipment connected to AV2 terminal.
eRF OFF/TEST SIGNAL SWITCH
Switch to “OFF” position only if interference beat occurs,
then viewing via 21-pin scart connection only.
(13)
(14)
и
i
i
|
I
|
Tuning the TV to your VCR
À
$
$
|
=
ad
It is possible to view the video picture on your TV in the
same way that you watch TV broadcasts.
If you have connected the VCR to the TV through the
21-pin scart terminal, then you do not need to follow the
procedure mentioned below.
Preparations
e Turn on the TV.
e Refer to the operating instruction of the TV set and carry
out tuning/preset procedure,
Operations
dr
=
=
3
Turn on the VCR.
TEST
2 AF OFF—SENA:
СРР.” Ml: oped
=>
To generate a test pattern, set RF OFF/
TEST SIGNAL to TEST SIGNAL ON.
On Screen Display
3
|
|
Aus-pelad roan
TE]
F
3
3 =
ms
Set the TV to an unused position which you
wish to use for your video piayback.
e Tune the TV until the test pattern appears on the screen.
«On Panasonic TV the programme number 3 shouid be
selected to obtain best performance.
|
| | *When the VCR is turned on after connecting the aerial
| lead and the mains lead, Auto setup (Auto tuning and
| Ш ее) | || Auto clock setting) starts. (See next page.)
(During Auto Setup) (After Auto Setup)
4 ве OFF SGL Set RF OFF/TEST SIGNAL to TEST
OFF... rnd SIGNAL OFF.
MT -ON
tu
Note:
The test signal is transmitted on channel 36 of the UK
broadcasting channels. If you are encountering
interference from another broadcast on the video channel,
you may readjust to a free channel (30—42) by using the
CH ADJ. screw which is located on the rear of the VCR.
Please note that if the CH ADJ. screw is used then you
will have to retune your TV to the test signal as in item 2 to
à abôve.
Auto Setup
Auto Setup
When the VCR is turned on after connecting the aerial
lead and the mains lead, Auto setup {Auto tuning and Auto
clock setting) starts.
On Screen Display
AR = Fue
phony wp:
i
| EXT “= wo
1
|
CG +
e The Auto setup is searching for TV station from minimum
to maximum and memorizing the data for every
programme position.
e The Auto setup takes two or more minutes to complete
the search for TV station and the clock setting.
elf the clock setting screen appears after auto setup has
been completed, refer to page 35 and proceed with the
setting.
Note:
if VCR is not correctly set by Auto setup. see Various
Settings on pages 30-32 and 35.
Viewing the TV station list
Use the following steps to confirm that the Auto setup is
correctly set.
Preparations
e Confirm that the TV is on and the VCR viewing channel
is selected.
e Turn on the VCR.
| ARA
«Ia = :
1 Press MENU,
rar pes ae
GE) a
1s Ean]
| STE >
X ELT br Tr
—"
f
К
Setting Up
Ш
—
Kan TTT
2 Select Station list.
Tre ari 7
| San E
©
(
1 1- =a er |
| SIZE hacia
T. mee TA J
3 Select the desired TV station, if you want to view the
broadcast. -
CA : x
у or \ ! Fl Se er:
i fo 1 | STORE arca peciedorosocarle"
1
| EE | EA Î i VES. reir ae !
| | L ;
I
* To leave the Menu. /
| The station names have | — When the station names !
been entered and set ; have not been correctly
correctly. . . entered and set.
|
|
!
Perform the settings on
pages 30-31. a
Auto setup is completed.
(15)
(16
Basic Operations
Playback
Manual Recording
Basic Operations
(17)
Playback
Operations
Display Symbols
1
al
insert a recorded cassette
tape.
Start viewing the picture.
Search forward by briefly
pressing FF.
#To change back to normal
playback, press PLAY.
Search backward by briefiy
pressing REW.
#To change back to normal
т лаг; nracc Dt AV
JUAN RACER | FF wr kul # ый" Бо.
View a still picture.
* To continue the normal playback,
press PLAY or PAUSE/STILL
AO NO SSN
View the slow motion
picture.
e To continue the normat playback,
press PLAY.
Stop viewing the picture.
(18)
Other Playback Functions
T0 oblain Aigh Speed Picture during
Fast Forward or Rewind
Keep FF pressed during fast forward.
Keep REW pressed during rewind.
To adjust the tracking and the
vertical locking
— TRACKING: -LQGK -
For manual tracking adjustment
The + and — buttons are used to adjust the tracking”
when, for example, noise bars on the picture are better
removed manually than by the automatic digital tracking
control.
Press both buttons together to return to automatic digital
tracking control.
For slow tracking adjustment
When noise bars appear during Still or Slow playback,
switch over ta slow playback and adjust with the + or —
button to reduce the noise bars.
For vertical locking adjustment
Use the + and — buttons to minimize any vertical jitter
during still-picture playback.
even after manual adjustment, noise bars or vertical jitter
may not be eliminated completely, especially for tapes
recorded on another VCR. This is not malfunction. ….
Notes:
e Audio reproduction of linear {conventionally recorded)
tapes will be monaural when played back on the FM.
Hi-Fi video recorders.
eCue, review or slow playback will be automatically
released after 10 minutes, and still playback after
5 minutes.
ein “LP” mode only:
1. During any playback mode other than normal
playback, the picture may have some noise bars, the
colour may be unstable, or a black and white picture
may appear.
2. When playing back a tape which was recorded on
another VCR, it may be necessary to adjust the_.
Tracking Control. In some cases the picture quality
may still be inferior. This is due to limitation of format.
Basic Operations
(19)
Manual Recording
== Operations Display Symbols
a 1 = ea a
; (rome TAY Sa press POWER to turn the VCR on.
>
Select TV station.
ес
К
Start recording.
CAR
A —— Stop recording.
A
(20)
To select the Desired Tape Speed
Press RECORDING SP/LP before recording.
SPP
SP gives the best picture quality,
LP gives the longest recording time.
To interrupt Recording
Press PAUSE/STILL during recording.
Press again to continue recording.
ani
U
18
PALSE:
STILL
To record One TV Programme while
Viewing Another Programme
1 Refer to the manual recording operations steps 1 to 3
(page 20).
2 Select the TV programme on your TV set you wish to
view at the present time.
To display the Approximate Remaining
Tape Time
1 Select Tape Length from On Screen Display and select
the corresponding cassette tape length. See page 34.
On Screen Display
©
7 90
| Es |
| FY DECODER '
u] ( STORE) => CC» | |
i == sae 1
| STEHE Nemo |
fe cé CE = I
\ MEA: та Seen = charge |
« E-180: For E30, -60, -90, -120 and -180 tapes. —
E-195: For E195 tape.
Е-240: For E240 tape.
E-260 y: Fo: E260 and -300 tapes.
2 Press DISPLAY.
DISPLAY al
ПС
О LE
Г” Clock-» Counter— Remaining Tape Time —
|
e The remaining tape time may not be displayed
correctly depending on the tape used.
Notes:
eWhen a video cassette with a broken off tab is inserted,
the “E indication will flash to indicate that recording is
not possible.
eThe recording pause mode will be automatically
released after 5 minutes and be back to the stop mode.
%
>
с
“
Basic Operation
The NICAM Broadcast System
This VCR is equipped with the NICAM sound system.
NICAM is a 2 Channel sound broadcast system to provide
either a high quality stereo sound track or
Fr mE ET Tw ee er A
2 independent MONO sound tracks, M1 and M2.
NICAM programmes are always accompanied by
standard sound broadcasts and you can select the
desired sound with AUDIO OUT during playback.
* The NICAM digital stereo sound can only be recorded on
the Hi-Fi audio track.
e To record the regular sound (ordinary normal sound) on
the FM audio tracks when a NICAM programme is
received, select NICAM OFF during manual tuning
procedure. See page 30.
Imnortant М те far tha MIT ARS Syetom
When this VCR is swiiched on, the tuner will automatically
switch to a NICAM broadcast, if NICAM is being
transmitted. During test transmissions, it is possible that
the sound received doesn’t correspond to the picture
being viewed. In order to receive a synchronized sound
~and picture, select monaural sound with AUDIO OUT or
NICAM OFF setting. This will only apply until NICAM
transmissions are fully operational.
At this time the NICAM signal is transmitted on stereo
channels only, since the M1 and M2 formats are not yet
available.
(22)
Timer Recording |
Using On Screen Display
Up to 8 timer programmes can be recorded up to one —
month in advance by setting the timer, including weekly
and daily programmes.
Programming the Video Plus+ PlusCode
Editing
Assembly Editing
This function can be used to make up an edited tape from
other recordings or video sources.
A new scene can be added to the end of a previous one.
Other Functions
On Screen Display
Other Automatic Functions
=_= == = 5 - = Ls = = = — == EE ot
Advanced Operations
(23)
Timer Recording
Using On Screen Display
Ll In to 2 timar Prog rammas san ha rannrdan re Ea Ana
{1 ный nd PLAN Trl AA Nd A Wd hab -й LA
month in advance by setting the timer, including weekly
Follow the operation guide on screen display.
Set each item by using A V «<».
Operations
and daily programmes, ВЕ
Preparations
e|nsert a cassette tape with an intact erasure prevention
tab.
eConfirm that the TV is on and the VCR viewing channel
is selected.
For Example:
Programme position (channel); 2
Date; 27th, October
Starting time; 20:02
Ending time; 21:30
(Present date; 16th, October)
Press MENU, and then select Timer
recording.
2 Select the unoccupied position.
“y Set Programme position (channel)
vw“,
4 Set Date “27/107.
5 Set Starting time “20:02.
eWhen it is kept pressed. the indication changes
in 30-minute steps.
~ Set Ending t time “21:30”.
7 Select the desired Tape speed
(SP/LP).
Select PDC ON or OFF (———).
ePDC is automatically
set to ON if the TV On Screen Display
station transmits PDC mE
signals. But it can be . |
set to OFF manually if | Na |
desired. | ==
Press STORE.
sFor the setting other programmes in
succession, repeat steps 2-9,
1 О To activate timer recording, press
TIMER REC.
Weekly Timer Recording
In step 4, select the desired day by pressing Y.
Daily Timer Recording
For this timer function, several groups of days can be
selected.
(A) Daily recording from Monday to Friday.
Daily recording from Monday to Saturday.
(C) Daily recording from Sunday to Saturday.
In step 4, select the desired days by pressing Y.
Timer Recording from External Signal
Source
If Timer Recording is performed by a unit connected to the
AV1 or AVZ Socket, select the A1 or A2 for the
programme position.
AT: Through the AV1 socket.
A2: Through the AV2 socket.
Checking a Timer Programme
Confirm that the TV is on and the VCR viewing channel is
selected.
1 Press MENU, and then select Timer recording.
2 Press STORE.
eOn Screen Display may be On Screen Display
distorted in the PDC recording J
standby mode, [o pee
Cancelling a Timer Programme
Confirm that the TV is on and the VCR viewing channel is
selected.
1 Press MENU, and then select
Timer recording.
2 Press STORE.
3 Select the desired timer
programme.
ls e |
4 Press CANCEL. E |
PDC (Programme Delivery Control)
How to use PDC?
(1) The VCR detects if broadcast stations transmit PDC signal or
not at the time of "Auto-setup” only, and stores this
information in its memory,
If broadcast stations introduce or discontinue PDC
transmission later on, "Auto-setup” must be carried out again
to update the VCR's memory.
PDC mode will be automatically set to “ON” when using
“Video Plus+" codes for timer programming, if the stations
have been memorised by the VCR as having PDC
transmission.
PDC mode will be automatically set to "OFF" if the start time
is altered during timer programming.
(3) PDC mode will be automatically set to “---" (no PDC) when
Leif “Aidan Pla et” „чес far timar nrecmrammina if thn
Ed 14 мой I a La? al ud 1867 -”' Fgh Lane "a T1 1%
stations have not been memeorised by the VCH as having
PDC transmission.
(4) PDC mode will be automatically set to "OFF" when timer
programming ls done, for any station, by the “On-Screen”
timer recording method, because the start time can be
entered freely by the user.
To use PDC recording in this case, if the station transmits
PDC signal, set PDC mode to “ON” and ensure that the start
time is set to exactly the same as the published time, e.g. in
newspapers, magazines, etc. If this is not done correctly,
recording will not start.
(2
"——
| es PE prom A ala ma
TLS WILL ОС EZ 70 ALI ta.
(1} PDC recording will start approximately some seconds before
the broadcast programme commences and may stop some
seconds before or after the end of the programme,
depending on the control from the broadcaster.
Normally programmed timer recording data is automatically
cancelled after recording is completed.
Under the following conditions the programmed timer
recording data will be automatically cancelled at 4 a.m. of the
next day.
{a} If PDC signal cannot be detected during PDC timer
recording, the VCR will perform normal timer recording
(without PDC).
(b) If à timer recording is incompiete due to insufficient tape
ar cancellation by the user.
(с) If timer recording is still in progress at 4 a.m.
(d) If the broadcaster transmits a PDC signal to suspend ог
interrupt the recording.
In these cases, the VCR will remain in the timer standby
condition after timer recordings have been completed.
(3) H PDC is set to "ОМ" manually for the station which does not
have PDC transmission. the VCR will perform normal timer
recording (without PDC).
(4) Incase of multiple timer programrings. while the VCR is in
timer standby mode the VCR will periodically check PDC
tab Af the rar and Ве Но ля DOW in tara far amu
a LE Ard Li ER pra CRE AE EPL ÉLARGI YY ILD 0 e CARLA PRA LK] x
change in the start time of each programme. But while the
VCR is recording a programme, it can only check the PDC
status of that programme being recorded.
(5) If the actual broadcasting times of timer recordings overlap
(regardless of whether they are PDC-contrelled), the
recording that starts first always has priority, and the
recording of the later programme will start only after the first
timer recording has finished.
(2
—
Advanced Operations
(25)
(26)
Programming the Video
FE. _ _ or Fui. 4 0
FUST FIUSTOUE
Programming is now easier than ever: simply enter the
PlusCode provided in the programme schedule column
carried by newspapers and magazines.
PlusCodes are numbers which are assigned to each
programme listed in the TV programme schedule carried
in newspapers and TV guides. When these codes are
entered and STORE is pressed, the codes are converted
into the actual programming.
Preparations
elnsert a cassette tape With an intact erasure prevention
tab.
eConfirm that the TV is on and the VCR viewing channel |
Is selected.
Operations
e To extend the ending time or to make any
corrections, use buttons A Y <>.
When programming for the first time using a
Video Plus+ PiusCode, "—— will appear for the
programme position because the station has
been manually tuned,
In this case, select the
programme position of your
VCR which receives the TV
station you entered the
Video Plus+ PlusCode for
at step 2 using button :
A oy. os e mias peo
a = = i en of een
e Next time Video Plus+ PlusCode for this station is
entered, the correct position wili appear.
4 Press STORE once more to confirm.
e The VCA will go into timer recording standby
mode.
Note:
The VCR will automatically change to the timer
recording standby mode after about 1 minute. if
STORE is not pressed.
5 When programming two or more
programmes, repeat steps 1—4.
1 Press VIDEO PLUSH.
VIDEO PLUS +
“y Enter a Video PlusCode for the TV
&
programme to be recorded.
Example: 920216
Notes:
eTo release from the standby mode, press TIMER REC.
eWhen the PlusCode is used for programming, the
recording time may be slightly longer than the actual
programme time.
= Tne procedures Tor Checking and canceling a timer
programme are the same as on page 25.
Editing
Assembly Editing
This function can be used to make up an edited tape from
other recordings or video sources.
A new scene can be added to the end of a previous one.
Preparations
e Connect a movie camera or another VCR to this VCR as
shown.
insert a recorded cassette tape with an intact erasure
prevention tab.
e5Select the video source required by pressing A VW to
set AT or A2.
At: Through the AV1 socket.
A2: Thro ah tne AV? socket.
NA
Operations
Recording VCR
1 Search for the end of the previous
recording.
Playback unit |
Press PAUSE/STILL.
O
PAUSE
STILL
N
3 Press REC to switch the VCR from the
pause mode to the recording standby
mode.
O
REC
4 Start the new recording by pressing
PAUSE/STILL again.
O
En
PAUSE
STILL
5 Press STOP to stop recording.
STOP
[|
Note:
The new sound will be recorded on both the normal and
Hi-Fi sound tracks, only monaural sound recording is
possible on the normal sound tracks.
5357
Advanced Operations
| =
ES VAY VOLUME
(27)
Other Functions
On Screen Display o Other Automatic Functions
Press OSD to make the On Screen Display appear on the |
TV screen.
Фо ©
(ry om |
osD | Automatic Playback
|
When a cassette without an erasure prevention tab is
| inserted, the VCR starts playback automatically.
| I VCR-off Playback
1AM mes ds AD AH Tra a aa нь Fire mil a aa
Y YT LEI| LITE Y II is м, ar H ITE Ld casseaits САР вок рн ayr
back by pressing PLAY,
i
u
Automatic Rewinding
When the tape reaches its end during recording (except
for timer recording) or playback. it will automatically be
rewound to the beginning.
Automatic Switching Off and Election
When the VCR is switched off. and inserted cassette can
be ejected simply by pressing EJECT. The VCR will eject
the cassette and automatically turn itself off again.
356: Q50 O O
@ Tv station
oO Nicam or Mono Indicator
When receiving a TV programme, the type of sound
system in which it is broadcast is automatically
indicated.
elf NICAM OFF is selected during manual tuning
procedure, Mana indicator is always displayed.
(See page 30.)
Audio Output Mode Indicators
The Left (L) and Right (R) Indicators show which
sound mode is selected with AUDIO OUT.
Stereo: Both the L and R Indicators appear.
Left: The L Indicator appears.
Right: The R Indicator appears.
Normal: Both the L and R Indicators don't appear.
Note:
When the item “On screen display" is set to OFF, the On
Screen Display will not appear except for error message.
(See page 33.)
(28)
Storing TV Broadcasts into your VCR )
The VCR is fitted with its own TV tuner (just like a normal
TV set) and can be pre-set to recelve up to 99 TV
broadcast stations.
Settings Using On Screen Display
Зы? EA WW wa i
e Clock of your VOR
The built-in clock is used to activate the timer for
automatic recording and must be set to the correct time.
Various Settings
(29)
Storing TV Broadcasts into your VCR
Introduction
The VCR is fitted with its own tuner (just like a normal TV
set) and can be pre-set 10 receive up to 99 TY broadcast
stations.
When your video cassette recorder is plugged in for the
first time, the Auto Setup feature will tune in your channels
automatically.
However, under certain circumstances in some —
transmission areas certain channels may not be assigned
a channel name or their normal channel position. If this is
the case they will need to be tuned manually. if Auto
Setup is not successful, please follow the steps below.
Preparation
Confirm that the TV is on and the VCR viewing channel is
selected.
Ss SD O O
(OH)!
O
(©) ©) © ‘
Manual Tuning Procedure
Follow the operation guide on screen display.
Operations
Press MENU.
2 Select Settings.
1 TE peor |
ade
© =p (STORE) ея |
|
|
| Ta rc 1
1 STORE uate }
1 ENT EA A
— —
(30)
|
i
+
Select Manual.
> GoD |
|
ma je PoP Pol
ti erry
STINE == на
WES 7 MPTEX Face
et ee | as es | le
L
5 Select desired programme position.
6 Select the Signal Transmission
Channel (Ch) if Г me
known. |
|
© + ©O- ©
Use the numeric
buttons.
Example; 33
else A Y to search for the station if channel
number is not known.
7 Select NICAM a a
Auto. | |
— | “Toi —— Wamp NES - |
V | > m |
e Select NICAM OFF to record the normal sound
during a NICAM broadcast or if the stereo scund is
distorted due to inferior reception conditions.
8 Press MENU, and then press EXIT.
un EC re rar raras E Es BF bn fran ra aia CV LE
e nepsar SIEPS $ 10 O DEIOrE pressing AI: il
manual tuning for other station is required
Entering the Station Name
Follow the steps 1 to 4 on page 30.
5
Select the station{s) named > > > = >=
for which you wish to setup name.
Establish which channel you are
viewing, by checking your TV Guide/
Newspaper. On Screen Display
o wp (sore) | 15.85
O LETTER gx |
Ne | 2 xxl 4 e |
I саксы: des see |
| GENS pe }
Highlight the — —,
TV station name. |
|
© + ES | ame |
|
Enter characters into all five > > жж Ж
positions, from the table using the
arrows and press STORE after each
character. Use blank space if required,
to enter a blank select the area
between Z and x. ¡— a
| .
: ЗА
©
© >) aj ( STORE
( ) | ra Бо | FEE
1 и | 1 de Mae atera ma i
Press MENU once.
If you wish to change or setup, any
other TV station names repeat steps
5-8.
| 294 Mare CT Micam
- ez 23 AE
2 Ty #4 dads
a Z= E dds
4 Bac: ZE haan
& & MZ
8 ---—— Zz da
=-- uaz
a —— E da
0 Au
E
T
! o =
( MENU ) TE A
| Tr Мыс: or
Press EXIT.
EXIT
Changing the Programme
Position
Follow the steps 1 to 4 on page 30, then follow the
example below,
5 Select the
station(s) named
“BBC1”.
6 Select the number — —
location you want |
to set the channel.
Use the numeric | ls de e ме |
a ==: Acar
buttons. pe |
Example: 1 Le ee |
= Press MENU
f once
MENU
@ To amend other programme 7
positions repeat steps 5—7.
9 When correctly
tuned your anal teo
station list will | = cae 2 ner |
look like this. 155 EE |
(Channel == |
information | сны мать |
will vary.) EEE |}
* This is needed for using Video Plus+
PlusCodes correctly.
1 О Press EXIT. —
Note:
When channels have been set with manual tuning, the
channel position will need to be entered in the highlighted
box the first time Video Plus+ is used.
Various Settings
(31)
(32)
Channel Plan
_—
| VHF UHF
| NV-HD605B — 21-69
| NV-HD605BL Ad 21-69
{CATV
104-470 MHZ)
Blanking of Unoccupied
Programme Positions
Follow the steps 1 to 4 on page 30.
5 Select the TY channel you want to delete.
O
6 Press CANCEL.
On Screen Display
a Haneat atone § and 6 for another "noccunted
Tr “a Ma Mf Ta mar my gr
= > A > dy kr 1 NC CT A
programme positions to skip during the selection of
the programme positions.
7 Press EXIT.
EXT
Auto Setup Restart
if tha VCR is maved to a different TV transmission area.
you may have to retune your VCR. Follow the procedure
below.
Foliow the steps 1 to 3 on page 30.
4 Select Auto setup restart. SE
emt eB i em 8 a mm
É
Shipping Condition
If you want to return the VCR to the factory-preset
condition, follow the procedure below.
Follow the steps 1 to 3 on page 30.
4 Select Shipping condition.
©”
|
==
| | |
| <= =.
5 Press STORE.
{ STORE )
6 Press STORE again.
Note:
To re-tune VCR, disconnect mains lead and then
reconnect mains lead. If VCR is off, turn on the VCR. Auto
setup will start automatically.
Settings Using On Screen Display
Preparations VCR functions
eo Confirm that thie TV is on and the VCR viewing channel
is selected. On Screen Display
e Turn on the VCR. 1 Press MENU, and then select Settings.
On Screen Display
QO
PO
cn
POWER OS» D'EPLAY RESET 3 Select On screen display.
5 O
n
PAUSE SLOW
Various Settings
STILL
4 Select ON or OFF.
e
(E
ON: The On Screen Display will appear on the TV
screen by pressing OSD.
OFF: The On Screen Display will not appear even if
OSD is pressed.
ENO 1
(33)
VCR Display
1 Select VCR Display.
On Screen Display
©
|
| BD fe-cener DECO
o | |
| RY mé ош
! MENU hmm ara
2 Select ON, OFF or DIMMED,
O) © | rs x |
| |
q
]
ji nr
E |}
ON: When VCR is turned off. the characters are
lit in the VCR display.
OFF: When VCR is turned off, the characters are
not {it in the VCR display.
DIMMED: When VCR is turned off, the characters are
dimmed in the VCR display.
To select the Corresponding Cassette
Tape Length for Displaying the
Approximate Remaining Tape Time
1 Select Tape Length.
| ni se
2 Select the corresponding cassette tape length.
Dr bcreér each; OFF
CPC Ce
Tape iene — E-1
- > AYE Dons НКР +
—
= Far
STORE ser
\ ЗЕНА. “man a
<“ E-150: For E30, -60, -90, -120 and -180 tapes.
E-195. For E185 tape.
E-240: For E240 tape.
E-260 >: For E260 and -300 tapes.
eo The times displayed may differ depending on the tape
used.
(34)
AY? Connection
1 Select AY2 Connection.
©
2 Select VCR/SAT or DECODER.
a =
(<) (>) AE Corrado VEREAT
ol TE ея}
VCR/SAT: When another VCR or the satellite
receiver is connected to the AVZ sockst,
DECODER: When the decoder is connected to the
Av2 socket.
Aa AN Cannes
MING] MIA LIN fr
Press STORE, and then press EXIT lo make On Screen
Display disappear.
Setting the Clock of your VCR
The built-in clock is used to activate the timer for
automatic recording and must be set to the correct time.
The built-in digital clock employs the 24-hour system.
If VCR is not correctly set by Auto setup. follow the
procedure below.
Preparations
e Confirm that the TV is on and the VCR viewing channel
is selected.
e Turn on the VCR.
y
POWER -
TV/AY VOLLME
Manual Clock Setting
Follow the operation guide on screen display.
Operations
5 Set Date (D).
1 Press MENU, and then select
Settings.
Select Clock.
2
3 Select Manual setting.
4
Set Time (H/M).
e\When it is kept pressed, the indication changes in
30-minute steps,
6 Set Month (M).
7 Set Year (Y)
|
; |
Dei 165 e I
I
|
| > Th
a com I
' T
\ MENU aT witha crane i
Press STORE.
e The clock will start.
9 Press EXIT.
Automatic Clock Setting
Follow steps 1 to 2 of the above procedure.
3 Select Automatic setting.
4 Press STORE.
e The clock is set automatically.
Notes:
e The clock operates for at least 60 minutes by its backup
system in the event of power failure.
e When the item “Automatic clock-set is” is ON, on the
on screen display, Automatic time correcting function is
activated.
The Automatic time correcting function will only work
when the VCR is in standby. This function will not work
during timer recording standby mode.
Various Settings
(35)
(36)
Before Requesting Service
Before requesting service, check the following points once
again.
Helpful Hints
(97)
Before Requesting Service
Before requesting service. check the following points once again.
== Message of On Screen Display
Fo Too
| 1
|
| |
| |
|; —] -Message of On Screen Display is displayed.
: | I
i |
! |
(A —
==. MESSA NESSAGE | = CAUSE E REMEDY
This action " VIDEO PLUS+ is pressed Set date and time.
nis action is not possible -
before tims and date is set when date and time are not
set.
pi sen REC, PLAY, FF or REW is Insert a video cassette.
cassé rise .
; pressed when no cassette in
Video t
eaters the VCR.
Please use REC is pressed without tab Use a cassette with tab.
unprotectad tape : of Cassette.
Self Test Indication
This VCR has a self-diagnosis and display function. If the VCR detects trouble during installation or during use, the following
indications automatically appear in the VCR display. indications are displayed in the form of a single English letter plus two
numbers such as [HO1].
TT CAUSE REMEDY
ZU some trouble has occurred. Consult your dealer for further advice.
. (Numbers following H and F
differ according to the status
of the VCR.)
(38)
VCR will not operate correctly
. Y ~~ es
CAUSE | REMEDY CHECKED
| VCH display is not Mains lead is not connected. | Reconnect mains lead to VCR.
illuminated. :
| ¡ VCR Display setting is OFF. | Set VCR Display to ON or DIMMED. See page 34.
| VCR display is . VCR is in timer mode. | Press TIMER REC to cperate VCR manually.
illuminated but VCR 1
- will not operate. Safety devices are operating. | Disconnect mains lead and wait for 1 minute.
* Reconnect mains supply and check functions.
formed.
| Condensation may have | Do not operate VCH for 1 hour.
— Playback will not operate correctly
т CAUSE REMEDY CHECKED
Picture noisy or not Tracking is not correct. Adjust the tracking. See page 19.
in colour.
Horizontal bars or TV set is not tuned to VCR. Operate RF OFF/TEST SIGNAL on VCR and check
lines run down the TV tuning. See page 14.
screen. т ce
Video heads are clogged or Consult your dealer for further advice.
worn. Head cleaning by service agent is not covered by :
warranty.
Helpful Hints
(39)
a —
Recording will not operate correctly
5 MTS EE.
SYMPTOM
Tall CAUSE REMEDY CHECKED
"Bil indication Erasure prevention tab on Use tape with intact erasure prevention tab, or cover
flashes whenever cassette is broken off. tah hole with adhesive tape, if original recording is
recording is no longer required.
. attempted. ;
Picture is recorded Aerial or aerial lead is Check aerial connection to VCR. See page 12.
with noise or blank defective. Check your normal TV picture. if there is no picture,
screen. check your aerial.
VCR is not correctly tuned. Re-tune VCR. See pages 30-31.
A1 or A2 is selected. Select the required TV programme.
; Timer recording Clock or calendar is Check clock and calendar. Set to present time.
cannot be - incorrectiy set. : (Note this is a 24 hour clock.) See page 35.
- performed.
; Recording start or end time Set recording start and end time correctly.
setting is incorrect,
VCR is not set for timer Press TIMER REC after nrogramming for timer
recording. recording.
AV external AT or A2 is not selected. Select A1 or A2 by pressing VA.
recordings cannot
be made. External AV connections are Check that connections for external video and audio
incorrect. source are correct. See page 27.
= Remote controller will not work correctly
—- SYMPTOM CAUSE REMEDY CHECKED
Remote controller
does not operate
correctiy.
Remote controller transmitter
beam is not reaching VCR.
Ensure that remote controller is being pointed at
VCR and that transmitter beam is not obstructed.
Distance is too far.
Use remote controller within 7 m of VCR. if this
range is not possibile, replace batteries,
Batteries are exhausted.
Replace batteries. Note precaution for repiacement
on page 7.
Batteries are incorrectly fitted
arte F1 SN Fa an m
YEFILII A Гб; У С Л,
Fit batteries correctly as shown on page 7.
Precautions
Please read these cautions before you operate this VCR.
Avold Sudden Changes in Temperature
If the VCR is suddenly moved from a cold place to a warm
place, condensation may form on the tape and inside the
VCR.
Humidity and Dust
Avold places where there is high humidity or much dust,
which may cause damage to internal parts.
Do Not Obstruct the Ventilation Holes
The ventilation holes prevent abnormal increases in
temperature. Do not block or cover these holes. Especially
avoid covering the holes with soft materials such as cloth
or paper.
Keep away from High Temperature
Video Head Clogging
recording and read picture signals from the tape during
playback and they are, therefore, of critical importance for
the picture quality. H the VCR is used over extremely long
The video heads place picture signals on the tape during
_ periods of time, these heads may become dirty and
clogged. In such a case, the signals can no longer be
recorded correctly, and the playback picture will be
distorted accordingly. This is the case, for example, during
the playback of a tape, the sound is reproduced normally,
but no picture is seen, or the picture is greatly distorted.
When such a symptom case occurs have the recorder
checked by qualified service personnel.
Head cleaning by service agent is not covered
by warranty.
Keep the VCR away from extreme direct heat such as.
direct sunlight, heating radiators, or closed automobiles.
Keep Magnets away
Never bring a magnet or magnetized object near the VCR
because it will adversely aliect the periormance of the
VCR.
No Fingers or Other Objects Inside
Touching internal parts of this VCR is dangerous, and may
cause serious damage to the VCR. Do not attempt to
disassemble the VCR. There are no user serviceable
parts inside.
Keep Water away
Keep the VCR away from flower vases, tubs, sinks, ete,
CAUTION: If liquids are spilled into the VCR, serious
damage could occur. If you spill any liquid into the VCR,
consult qualified service personnel,
Cleaning the VCR
Wipe the VCR with a clean, dry cloth. Never use cleaning
fluid, or other chemicals. Do not use compressed air {0
remove dust.
Stacking
Place the VCR in a horizontal position, and do not place
anything heavy on it.
Condensation may form in the VCR if:
e The VCR is ina room where the heater has just been
turned on.
eo The VCR is in a room with steam or high humidity.
e The VCR is brought from cold surroundings into a well-
heated room.
* The VCR is suddenly brought from cool surroundings,
such as an air-conditioned room or car, to a place which
is hot and humid.
Note:
Do not operate the VCR for at least 1 hour if any of the
above conditions occur,
This VCR does nol incorporate a dew sensor.
Tape Care
a mrp ey = — === "=
Some do's and don'ts on tape care.
DO:
1) Use a good quality branded tape, such as Panasonic.
2) Keep in the Box supplied with your tape, or a video
case, when not in use.
3) Try to use all the tape on a cassette by making
recordings not only at the tape start but also in the
middle and end sections. This will avoid many
repeated recordings at the beginning of the tape
resulting in premature wear.
4) Take care to insert a tape correctly into the VCR to
avoid damage.
DO NOT:
1) Expose the tape to high humidity or temperature.
2) Expose to liquid.
3) Expose to dust particles by storing directly on a carpet
for example.
4) Use a damaged tape or attempt to repair.
5) Dismantle the cassette housing.
6) Attempt to lift the front cassette flap or touch the tape
surface.
Helpful Hints
(41)
(42)
Specifications
NV-HD605B...{U.K. model), Bl....(EIRE model)
Power Source:
Power Consumption:
| EEE!
Video Recording System:
Video Heads:
Tape Speed:
Tape Format:
Record/Playback Time:
VIDEO
Television System:
Modulation System:
Input Level:
Output Level:
AUDIO
Input Level:
Output Level:
Audio Track:
Video Horizontal Resolution:
Dynamic Range:
Audio Frequency Response:
Wow and Flutter:
Operating Temperature:
Operating Humidity:
Weight:
Dimensions:
Standard AÁrnacenrinc"
Tf ARE FLEA RL Wl FALL rag ATE
220-240 V AC 50-60 Hz __
22 watts
Ве.
я
2 rotary heads, helical scanning system
4 heads
SP; 23.39 mm/sec.
LP; 11.7 mm/sec.
VHS tape
SP: 240 min. with NV-E240
LP: 480 min. with NV-E240
CCIR; 625 lines, 50 fields, PAL colour signal —
Luminance; FM azimuth recording
Colour signal; converted subcarrier phase shift recording
AV1/AVZ; 1.0 Vp-p.
AV1/AVZ; 1.0 Vp-p.
RF Modulated; UHF channel 36 (+6),
AV1/AV2; —6 d8Y,
AV1/AV2; —6 dBV,
AUDIO OUT (PHONOY; -6 dBV,
1 track (Normal-mono only), 2 channels (Hi-Fi sound-stereo)
Colour; more than 240 lines (SP)
Audio; more than 90 dB (Hi-Fi audio track)
20 Hz—20 kHz
0.005% Wrms/Hi-Fi
5°С-40°С
35%-80%
4.2 kg
430 (W)x 99.9 (H)x315 (D) mm
1 nc. RF Coaxial Cable
1 pc. Remote Controller
2 pcs, "AB" size batteries
1 pc. AC Mains Lead
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.
75 chm, terminated
75 ohm, terminated
75 ohm
more than 10 kohm
less than 1 kohm
lass than 1 kohm
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement