Panasonic NVHS930EG Operating Instructions

Panasonic NVHS930EG Operating Instructions
Video Cassette Recorder
Model No.
Operating Instructions
Bedienungsanleitung
NV-HS930 Series
Contents
Page
Warning and Important Information
2
Controls and Components
3
Menu Operation
4
VCR Operation
4
TV Operation
4
Connecting and Setting up
5
When You Insert a Video Cassette
9
Playback
10
Recording
12
Satellite or Digital Receiver
14
Connecting a Stereo Amplifier
15
Connecting a Decoder
15
Timer Recording
16
Intelligent Timer Function
18
Tape Library System
19
Search Functions
22
Editing
23
Manual Tuning
27
Setting the VCR’s Clock
28
Various Settings
29
Other Function
31
Before Requesting Service
32
Index
35
Specifications
36
Please read through all these operating instructions (especially the safety
information) before connecting or operating the video cassette recorder,
or adjusting any settings.
Bevor Sie den Videorekorder anschließen, in Betrieb nehmen oder
irgendwelche Einstellungen daran vornehmen, lesen Sie diese
Bedienungsanleitung bitte vollständig durch (insbesondere die
Sicherheitshinweise).
VQT9616
Warning and Important Information
As this equipment gets hot during use, operate it in
a well ventilated place;
do not install this equipment in a confined space
such as a book case or similar unit.
WARNING:
To reduce the risk of fire, electric shock or product
damage, do not expose this equipment to rain,
moisture, dripping or splashing and ensure that no
objects filled with liquids, such as vases, shall be
placed on the equipment.
Important
Your attention is drawn to the fact that the recording of
pre-recorded tapes or discs or other published or broadcast
material may infringe copyright laws.
For your safety
Do not remove outer cover.
Touching internal parts of the VCR is dangerous, and may
seriously damage it. To prevent electric shock, do not
remove cover. There are no user serviceable parts inside.
Refer all servicing to qualified service personnel.
Inserting Remote Control Batteries
Insert the batteries with the polarity (+ and -) correctly
aligned.
+
+
Notes:
• The service life of the batteries is approximately 1 year.
However, it varies considerably depending on the frequency of
use.
• When they are exhausted, replace them with two AA, UM3, or R6
size batteries.
• When the batteries are exhausted, remove them immediately and
dispose of them correctly.
• Make sure that the batteries are inserted with the polarity
(+ and -) correctly aligned.
• Do not mix old battery with new battery.
• Do not mix different battery types, i.e. Alkaline and Manganese.
• Do not use rechargeable (Ni-Cd) batteries.
• Do not heat or short-circuit the batteries.
• When you do not use the remote control for a long time, take out
the batteries and store them in a cool, dry place.
Conserve the environment
See [Power save] of page 29.
Disposal of old equipment
Batteries, packaging and old equipment should not
be disposed of as domestic waste, but in
accordance with the applicable regulations.
2
Cautions before you operate this VCR
Avoid:
• Humidity and dust.
• Extreme heat such as direct sunlight.
• Magnets or electromagnetic objects.
• Touching internal parts of the VCR.
• Water or some other liquid.
• Lightning. (Disconnect the aerial plug from the VCR during
lightning storms.)
• Anything heavy on the VCR.
• Connecting or handling the equipment with wet hands.
• Using a cell phone near the VCR because doing so may
cause noise to adversely affect the picture and sound.
Do:
• Wipe the VCR with a clean and dry cloth.
• Install the VCR in a horizontal position.
• Keep the VCR, TV and other equipment switched off until
you have finished all connections.
Condensation may form in the following cases:
• The VCR is brought from cold surroundings into a
well-heated room.
• The VCR is suddenly brought from cool surroundings, such
as an air-conditioned room or car, to a place which is hot
and humid.
Note:
• In any of the above-mentioned conditions, do not operate the VCR
for at least 1 hour. This VCR is not equipped with a dew sensor.
Standard Accessories
1 pc. RF Coaxial cable
1 pc. Remote Control (N2QAKB000040)
2 pcs. R6 size batteries
1 pc. AC mains lead
Front panel
A half-mirror is used in the front panel. Characters
(tape counter, etc.) indicated in the display may be illegible
depending on environmental brightness and light reflections.
Maintenance
When the half-mirror on the front panel gets dirty with
fingerprints or dust, wipe it with lens cleaner for eyeglasses
or cloth taking care not to damage the mirror.
ENGLISH
Controls and Components
W
1
D
Y
X
9
J
EJECT
3D DNR
EXT LINK
TIMER REC
A.DUB
CVC
TBC
] ^ _
\
Z [
REC/OTR
INSERT
b
`a
Q
d
c
h i
e
f g
jk
S-VIDEO
AC IN~
SECTEUR~
AV1 (TV)
NORMAL
S-VIDEO
OUT/
SORTIE
VIDEO
8mm CONTROL/
CONTROLE 8mm
l
AV LINK
DIRECT TV REC TV ASPECT TV / TEXT
1
Í
2
1
2
3
+
4
5
6
–
7
8
9
mn
T
S
R
TRACKING/V-LOCK
Q
VOLUME
+
INPUT SELECT
3
4
5
6
7
–
0
AV
LIBRARY/SEARCH
INDEX
ShowView
STILL ALBUM REPLAY
REC
MENU
P
O
N
M
L
EXIT
K
J
8
I
OK
9
:
;
VCR
TV
<
=
>
?
@
r
r
r
DATE
ON
OFF
s
s
PROG. / CHECK CANCEL SP/LP/EP
s
TIMER
Á
AUDIO OSD/DISPLAY RESET
I-TIMER
VCR
1
2
MENU
EXIT
OK
V
VCR
TV
U
r
r
r
DATE
ON
OFF
s
s
PROG. / CHECK CANCEL SP/LP/EP
s
TIMER
Á
AV2 (DECODER/DECODEUR/EXT)
H
G
F
E
D
C
B
A
(1) [VCR-ON/OFF]/[TV-ON/OFF]
(2) [Numeric]
(3) [AV/INPUT SELECT]
(4) [LIBRARY/SEARCH]
(5) [REPLAY]
(6) [STILL ALBUM]
(7) [MENU]
(8) [Rewind]
(9) [Stop]
(10) [ON] (Yellow)
(11) [DATE] (Green)
(12) [CH] (Red)
(13) [CANCEL]
(14) [PROG./CHECK]
(15) [I-TIMER]
(16) [VCR 1/2] (#p. 30)
(17) [AUDIO]
(18) [OSD/DISPLAY]
(19) [RESET]
To reset the tape counter (elapsed time)
to [0:00.00].
• The tape counter is automatically reset
to [0:00.00] when a video cassette is
inserted.
(20) [TIMER]
(21) [SP/LP/EP]
(22) [OFF] (Blue)
(23) [VCR/TV]
(24) [OK]
(25) [Fast Forward]
(26) [Play]
(27) [EXIT]
(28) [REC]
(29) [Pause/Slow]
(30) [ShowView]
(31) [INDEX]
(32) [VOLUME]
(33) [Channel]/[TRACKING/V-LOCK]
(34) [TV/TEXT]
(35) [AV LINK/TV ASPECT]
(36) [DIRECT TV REC]
(37) [Teletext]
RF/
ANT
L/G
EDIT/MONTAGE
AUDIO
R/D
OUT/SORTIE
op
IN/
ENT
OUT/
SORTIE
q r
(38) [Cursor]
(39) [EJECT]
(40) [3D DNR]
(41) Cassette compartment
(42) S-VIDEO IN socket (AV3)
(43) VIDEO IN socket (AV3)
(44) AUDIO IN socket (AV3)
(45) Infra-red Remote Control Receiver
window
(46) [EXT LINK]
(47) [TBC]
(48) [INSERT]
(49) [A.DUB]
(50) CVC (CVC Super) indicator
(51) VCR display
(52) [REC/OTR]
(53) [Pause/Still]
(54) [Jog Dial]
(55) [Shuttle Ring]
(56) AV1 21-pin Scart socket
(57) AV2 21-pin Scart socket
(58) VIDEO OUT socket
(59) S-VIDEO OUT socket
(60) AC Input socket
(61) EDIT socket
(62) 8mm CONTROL socket
(63) [NORMAL/S-VIDEO OUT/SORTIE]
(64) AUDIO OUT socket
(65) RF IN socket
(66) RF OUT socket
3
Menu Operation
[Cursor] (38)
To select items on the menu.
[MENU] (7)
To display the Main menu.
[EXIT] (27)
To exit the menu.
[OK] (24)
To confirm or store the selection.
VCR Operation
When you want to operate the VCR, set the [VCR/TV] (23)
to [VCR].
[VCR-ON/OFF] (1)
To switch the VCR from on to standby mode or vice versa. In
the standby mode, the VCR is still connected to the mains.
[Numeric] (2)
To select the programme positions (1–99) of the VCR.
Example:
9:
19:
Setting the Remote Control to Operate
Your TV
This setting procedure allows you to operate the TVs of most
brands using the remote control supplied with this VCR.
• Some TV models cannot be operated with this remote
control.
1) Set the [VCR/TV] (23) to [TV].
2) Look up your TV’s manufacturer in the list of TVs
compatible with the VCR’s remote control.
3) While keeping the [TV-ON/OFF] (1) pressed, use the
[Numeric] (2) to enter the manufacturer’s code.
If there is more than one code listed for that
manufacturer, try the first code.
Be sure to enter the code in two digits.
Example: 01
4) Check whether you can operate the TV correctly with the
VCR’s remote control.
If the TV cannot be operated properly:
In step 3, enter the other code listed for that manufacturer
and repeat step 4.
List of TVs Compatible with the VCR’s Remote Control
9
1
9
To enter a SHOWVIEW number.
To enter numbers for various settings.
[AV LINK] (35)
To switch the TV from normal TV reception over to the video
playback channel (AV input) (and vice versa).
TV Operation
When you want to operate the TV, set the [VCR/TV] (23) to
[TV].
[Brand]
[Code]
[Brand]
[Code]
Panasonic
01–04
NOKIA
25–27
AIWA
35
NORDMENDE
10
AKAI
27, 30
ORION
37
BLAUPUNKT
09
PHILIPS
05, 06
BRANDT
10, 15
PHONOLA
31, 33
BUSH
05, 06
PIONEER
38
CURTIS
31
PYE
05, 06
DESMET
05, 31, 33
RADIOLA
05, 06
DUAL
05, 06
SABA
10
[TV-ON/OFF] (1)
To switch the TV on from standby mode or vice versa.
On some TVs it is only possible to switch the TV to standby
mode with this button, but not on. In this case, try to turn the
TV on with one of the following buttons:
[Numeric] (2)
[AV] (3)
[Channel] (33)
ELEMIS
31
SALORA
26
FERGUSON
10
SAMSUNG
31, 32
GOLDSTAR/LG
31
SANSUI
05, 31, 33
GOODMANS
05, 06, 31
SANYO
21
GRUNDIG
09
SBR
06
HITACHI
22, 23, 31,
40, 41, 42
SCHNEIDER
05, 06, 29,
30, 31
[Numeric] (2)
To select the programme positions (1–99) on the TV.
INNO HIT
34
SELECO
06, 25
IRRADIO
30
SHARP
18
ITT
25
SIEMENS
09
JVC
17, 39
SINUDYNE
05, 06, 33
LOEWE
07
SONY
08
METZ
28, 31
TELEFUNKEN
10–14
MITSUBISHI
06, 19, 20
THOMSON
10, 15
MIVAR
24
TOSHIBA
16
NEC
36
WHITE WESTINGHOUSE
05, 06
[AV] (3)
To select the desired AV input on the TV.
[Channel] (33)
To select the desired programme position (TV station) on the
TV.
[TV ASPECT] (35)
To switch the screen format between the wide-screen and
other formats.
[VOLUME] (32)
To adjust the volume of the TV.
[TV/TEXT] (34)
To switch between normal TV mode and teletext mode.
[Teletext] (37)
If your TV is equipped for Teletext reception, you can use
these buttons to change the teletext information displayed on
the screen and select desired information.
For details, refer to your TV’s operating instructions.
4
Connecting and Setting up
If you are connecting your VCR to a TV equipped with the
[Q Link]*1 function, then follow the steps.
For a TV equipped with the [DATA LOGIC]*2, [Easy Link]*3,
[Megalogic]*4 or [SMARTLINK]*5 function and with a 21-pin
Scart socket, also read from this page.
For details about the connections, also read TV’s operating
instructions.
5
1 2
3
6
7
8
10
4
11
1
2
3
4
5
6
7
8
9
10
11
9
AV1 21-pin Scart socket
Normal/S-Video Output switch
Aerial Input socket
Aerial Output socket
Aerial (not supplied)
Aerial lead (not supplied)
TV equipped with the Q Link (not supplied)
Aerial Input socket
21-pin Scart socket
RF Coaxial cable (supplied)
Fully-wired 21-pin Scart cable (not supplied)
Hints:
• Q Link is an advanced system that offers a range of convenient
functions such as automatic copying of the tuning position of all
available TV stations into your VCR’s memory (this is called
Download) if you connect the VCR to your TV with a fully-wired
21-pin Scart cable (not supplied). Depending on the manufacturer,
the equivalent of the Q Link function has a different name and may
not work exactly the same.
*1
[Q Link] is a registered trademark of Panasonic.
*2
[DATA LOGIC] is a registered trademark of Metz.
*3
[Easy Link] is a registered trademark of Philips.
*4
[Megalogic] is a registered trademark of Grundig.
*5
[SMARTLINK] is a registered trademark of Sony.
For details, refer to your TV’s operating instructions or consult your
dealer.
• Unlike in most commercially sold 21-pin Scart cables, in fully-wired
21-pin Scart cables all 21 pins of one plug are connected to the
matching pin of the plug on the other end of the cable.
• If the TV set is equipped with a 21-pin Scart socket that features Y/
C signal separation, set the [Normal/S-Video Output] switch on the
rear panel to [S-VIDEO OUT] so that you can play back with high
picture quality and use a fully-wired 21-pin Scart cable
(not supplied) to connect the VCR to the TV.
Preset Download
(To Simultaneously Set Up this VCR with a
New TV)
First of all, make sure that the VCR is switched off.
1) Switch the TV on.
The TV starts to tune all available TV stations and to
adjust the clock.
• When the TV has finished its
own auto setup, the VCR is
automatically switched on, and
the downloading of the setup
data from the TV to the VCR
starts. (Applicable to TVs with
[Q Link] or [DATA LOGIC]
function)
If your TV is equipped with the
[Easy Link], [Megalogic] or
[SMARTLINK] function, the
Country setting menu appears
on the TV screen. Press the
[Cursor] (38) 3421 to select
the desired country and the
[OK] (24).
Download
Panasonic VCR
Download in
progress,
please wait.
Position
Country
Belgien
Belgique
België
Danmark
España
Ελλάδα
France
Italia
Nederland
Norge
67
Panasonic VCR
Deutschland
Österreich
Portugal
Suomi
Sverige
Schweiz
Suisse
Svizzera
others
• The downloading automatically starts.
When the indication appears on
the VCR display, the
downloading is complete.
Note:
• If you accidentally switch on the VCR before the TV, downloading
of the setup data from the TV may not be performed correctly. In
this case, follow the operation steps.
1) Wait until the Auto Setup is complete on both the TV and
the VCR.
2) Press the [MENU] (7) to display the Main menu on the
TV screen.
3) Press the [Cursor] (38) 34 to select [Tuning] and then
[Download].
4) Press the [OK] (24) twice. Downloading of the setup data
from the TV to the VCR starts.
5) When the programme position and the current time
appear in the VCR display, downloading is complete.
Hints:
• If you use a Panasonic TV, starting the downloading of the setup
data will automatically display the [Download] indication. However,
in case of a TV of another make, the [Download] indication may not
appear. In this case, select the AV input on your TV if you want to
see the [Download] indication.
• If you select [Schweiz], [Suisse] or [Svizzera] on the Country
setting menu, the other setting menu appears automatically to let
you set [Power save] to [ON]. In this setting, the VCR’s power
consumption is minimised when it is off (Standby mode). To turn
the VCR on, keep the [VCR-ON/OFF] (1) pressed on the VCR
main unit, not with the remote control.
5
Preset Download
(To Set Up this VCR with a TV Already in
Use)
1) Switch the TV on.
2) Select the AV input on your TV.
3) Set the [VCR/TV] (23) to [VCR].
4) Press the [VCR-ON/OFF] (1) to
switch the VCR on.
Downloading of the setup data
starts automatically. (Applicable
to TVs with [Q Link] or
[DATA LOGIC] function)
If your TV is equipped with the
[Easy Link], [Megalogic] or
[SMARTLINK] function, the
Country setting menu appears on
the TV screen. Press the [Cursor]
(38) 3421 to select the
desired country and the [OK]
(24). The downloading
automatically starts.
Download
If you are connecting your VCR to a TV using RF coaxial
cable and 21-pin Scart cable, then follow the steps.
(AV Connection)
RF Coaxial cable must be connected to watch TV channels
even if 21-pin Scart cable is used to connect VCR to TV.
5
Panasonic VCR
1 2
Download in
progress,
please wait.
Position
3
6
7
67
8
Country
Belgien
Belgique
België
Danmark
España
Ελλάδα
France
Italia
Nederland
Norge
10
Panasonic VCR
4
Deutschland
Österreich
Portugal
Suomi
Sverige
Schweiz
Suisse
Svizzera
others
• When the indication appears on
the VCR display, the
downloading is complete.
Hint:
• If you select [Schweiz], [Suisse] or [Svizzera] on the Country
setting menu, the other setting menu appears automatically to let
you set [Power save] to [ON]. In this setting, the VCR’s power
consumption is minimised when it is off (Standby mode). To turn
the VCR on, keep the [VCR-ON/OFF] (1) pressed on the VCR
main unit, not with the remote control.
9
11
1
2
3
4
5
6
AV1 21-pin Scart socket
Normal/S-Video Output switch
Aerial Input socket
Aerial Output socket
Aerial (not supplied)
Aerial lead (not supplied)
7
8
9
10
11
TV (not supplied)
Aerial Input socket
21-pin Scart socket
RF Coaxial cable (supplied)
Fully-wired 21-pin Scart cable
(not supplied)
Hint:
• If the TV set is equipped with a 21-pin Scart socket that features Y/
C signal separation, set the [Normal/S-Video Output] switch on the
rear panel to [S-VIDEO OUT] so that you can play back with high
picture quality and use a fully-wired 21-pin Scart cable
(not supplied) to connect the VCR to the TV.
If you are connecting your VCR to a TV using S-Video cable,
then follow the steps. (S-Video Connection)
RF Coaxial cable must be connected to watch TV channels.
5
13
6
7
9
8
13
24
12
10
11
1
2
3
4
5
6
7
6
S-Video Output socket
Audio Output socket
Aerial Input socket
Aerial Output socket
Aerial (not supplied)
Aerial lead (not supplied)
TV with S-Video Input socket
(not supplied)
8
9
10
11
12
13
Aerial Input socket
S-Video Input socket
Audio Input sockets
Audio cables (not supplied)
S-Video cable (not supplied)
RF Coaxial cable (supplied)
Auto Setup Function
The Auto Setup function automatically tunes all available TV
stations and sets the VCR’s clock to the current date and
time.
1) Press the [VCR-ON/OFF] (1) to
turn on the VCR.
The Country setting menu
appears on the TV screen.
2) Press the [Cursor] (38) 3421.
Select the country where you are
using the VCR.
3) Press the [OK] (24).
The VCR’s Auto Setup
automatically starts and tunes all
available TV stations and also
sets the clock. This takes about
5 minutes.
When the indication appears on
the VCR display, the Auto Setup
is complete.
Country
Belgien
Belgique
België
Danmark
España
Ελλάδα
France
Italia
Nederland
Norge
Auto-Setup
Country
Tuning
Panasonic VCR
If you are connecting your VCR to a TV using only RF
coaxial cable, then follow the steps. (RF Connection)
RF Coaxial cable must be connected to watch TV channels.
3
Deutschland
Österreich
Portugal
Suomi
Sverige
Schweiz
Suisse
Svizzera
others
1
4
5
6
Panasonic VCR
: others
: Ch 21
4) Press the [MENU] (7) for more than 5 seconds.
The RF output channel number appears on the VCR
display.
The initial setting is channel 36.
5) Press the [Numeric] (2) [0].
The displayed RF output channel number changes to
[ss].
6) Press the [OK] (24) to conclude the setting.
To cancel the Auto Setup before it has finished
Press the [EXIT] (27).
When the clock setting menu appears after Auto Setup
has finished
1) Press the [Cursor] (38) 3421 to set the correct time
and date.
2) Press the [OK] (24) to conclude the setting.
To confirm that the TV stations have been tuned
correctly by the Auto Setup function
See page 27.
When no station has been set, confirm all connections
of the VCR again and restart the Auto Setup
See page 28.
When the station names and/or channel numbers have
not been set correctly
See page 27.
Hint:
• If you select [Schweiz], [Suisse] or [Svizzera] on the Country
setting menu, the other setting menu appears automatically to let
you set [Power save] to [ON]. In this setting, the VCR’s power
consumption is minimised when it is off (Standby mode). To turn
the VCR on, keep the [VCR-ON/OFF] (1) pressed on the VCR
main unit, not with the remote control.
2
7
1
2
3
4
0Aerial Input socket
0Aerial Output socket
0Aerial (not supplied)
0Aerial lead (not supplied)
5 TV (not supplied)
6 Aerial Input socket
7 RF Coaxial cable (supplied)
1) Press the [VCR-ON/OFF] (1) to
turn on the VCR and tune your
TV until the Country setting menu
appears on the TV screen.
2) Press the [Cursor] (38) 3421.
Select the country where you are
using the VCR.
Country
Belgien
Belgique
België
Danmark
España
Ελλάδα
France
Italia
Nederland
Norge
Panasonic VCR
Deutschland
Österreich
Portugal
Suomi
Sverige
Schweiz
Suisse
Svizzera
others
3) Press the [OK] (24).
The VCR’s Auto Setup automatically starts and tunes all
available TV stations and also sets the clock. This takes
about 5 minutes.
• When the indication appears on
the VCR display, the Auto
Setup is complete.
If, after setup, the picture on the video playback channel
is distorted, change the RF output channel on the VCR
to another number.
1) Press the [MENU] (7) for more
than 5 seconds.
The RF output channel number
appears on the VCR display.
The initial setting is channel 36.
2) Press the [Numeric] (2).
Change the RF output channel.
Enter a channel number which differs by 2 or 3 from the
one initially set number. For example, as the original
number is 36, enter 39.
Retune your TV to the VCR’s new RF output channel.
3) Press the [OK] (24) to conclude the setting.
To cancel the Auto Setup before it has finished
Press the [EXIT] (27).
7
When the clock setting menu appears after Auto Setup
has finished
1) Press the [Cursor] (38) 3421 to set the correct time
and date.
2) Press the [OK] (24) to conclude the setting.
To confirm that the TV stations have been tuned
correctly by the Auto Setup function
See page 27.
When no station has been set, confirm all connections
of the VCR again and restart the Auto Setup
See page 28.
When the station names and/or channel numbers have
not been set correctly
See page 27.
Hint:
• If you select [Schweiz], [Suisse] or [Svizzera] on the Country
setting menu, the other setting menu appears automatically to let
you set [Power save] to [ON]. In this setting, the VCR’s power
consumption is minimised when it is off (Standby mode). To turn
the VCR on, keep the [VCR-ON/OFF] (1) pressed on the VCR
main unit, not with the remote control.
8
When You Insert a Video Cassette
The Tape Library System makes it easy to check what programmes are recorded on the inserted tape and lets you quickly select
a programme for playback. For further details about the Tape Library System, see page 19.
When you insert a cassette with an erasure prevention tab:
When you insert a cassette without an erasure
prevention tab:
As soon as you insert the cassette, the Cassette Number Check starts
automatically. Wait a few moments until this check is completed.
As soon as you insert the cassette, playback
starts and the cassette number appears on the
VCR display for several seconds. However, the
cassette number and the cassette’s contents
(recorded programmes) do not appear on the On
Screen Display.
On Screen Display
VCR display
Checking tape number...
Please wait !
(When loading cassette No. 5.)
When inserting a cassette that was
recorded on this VCR:
When the Cassette Number Check is
completed, the cassette number and
the cassette’s contents (recorded
programmes) appear on the On Screen
Display, and the cassette number
appears on the VCR display.
Content of tape: 5
Title
Panasonic VCR
1/1
The cassette number and tape contents are
not displayed for the following types of
cassettes:
If you want to cancel the
Cassette Number Check
midway:
a. New (never used) cassettes.
b. Cassettes recorded on another VCR.
c. Cassettes whose cassette number was
deleted from the Library data.
d. Certain other kinds of cassettes.
Press the [Play] (26), [Stop]
(9), [EJECT] (39) or
[VCR-ON/OFF] (1) after the
check has started.
In the above cases, the following indications
appear:
Date
2 ZDF
(18:58) We 18.04.01
5 Find space to record 6
5 Intro-Jet Scan 6
Tape ID could not
be detected
(This indication appears for
several seconds.)
(This indication appears for
several seconds.)
(When loading cassette No. 5.)
To select a
programme
on the
inserted
cassette and
start
playback,
see page 20.
To perform playback
without making use of
the Tape Library
functions, recording or
some other function,
press the [EXIT] (27)
to make the Tape
Library indications
disappear, and then
operate the VCR for
the desired function.
Pressing the [EXIT]
(27) is necessary even
if the TV is not turned
on.
• No Tape Library data
appears if you cancel the
Cassette Number Check.
(See page 20.)
• If you cancel the Cassette
Number Check midway and
then perform recording, a
different cassette number
may additionally be recorded
on the cassette. However,
this VCR will automatically
cancel the added cassette
number(s) when you play
back the tape from the
beginning.
To perform playback, recording or some other
function, operate the VCR for the desired
function.
9
Playback
To Change the Playback Speed
1) Press the [Pause/Still] (53) on the VCR.
For Normal Playback
Press the [Play] (26).
2) Rotate the [Shuttle Ring] (55) clockwise
or counterclockwise.
For Cue or Review Playback
During playback, tap the [Fast Forward]
(25) or [Rewind] (8).
• To return to normal playback, press the
[Play] (26).
• Press and hold down the [Fast Forward]
(25) or [Rewind] (8). Cue or review
playback continues for as long as you keep the button
pressed.
• You can also perform same operation by turning the Shuttle
Ring clockwise or counterclockwise.
To Locate Precisely the
Desired Moment in a Scene
For High speed Cue or Review Playback (JET SEARCH)
During playback, tap the [Fast Forward] (25) or [Rewind] (8)
twice.
• You can also perform same operation by turning the Shuttle
Ring clockwise or counterclockwise.
For Still Playback
During playback, press the [Pause/Slow]
(29).
• To return to normal playback, press the
[Play] (26) or the [Pause/Slow] (29).
1) Press the [Pause/Still] (53) on the VCR.
2) Turn the [Jog Dial] (54) clockwise or
counterclockwise.
• If you keep the [Jog Dial] (54) turned
quickly, playback or reverse playback is activated while
the [Jog Dial] (54) turned.
To Select the Desired Sound Mode during
Playback
1) Press the [AUDIO] (17) during
playback.
2) Press the [EXIT] (27) to exit the
On Screen Display.
Audio Level
(Stereo)
–¶40 25 12 3 0 3 6
L
9 r12 dB
R
Every time you press this button, the
audio output mode changes as
follows.
Stereo#Left#Right#Normal audio track (Mono)
#Stereo
For Slow Playback
During playback, keep the [Pause/Slow]
(29) pressed for 2 seconds or more.
• To return to normal playback, press the
[Play] (26).
To Play back a Recorded Part Repeatedly
Fast-forwarding or Rewinding the Tape
Press the [Fast Forward] (25) or [Rewind] (8) in the stop
mode.
• To stop fast-forwarding or rewinding, press the [Stop] (9).
• To briefly view the picture during fast-forwarding or
rewinding, press and hold down the corresponding button.
• You can also perform same operation by turning the Shuttle
Ring clockwise or counterclockwise.
To Cancel the Repeat Playback Mode
Press the [Stop] (9).
To Stop Playback
Press the [Stop] (9).
Notes:
• JET SEARCH, Cue, review or slow playback will be automatically
cancelled after 10 minutes, and still playback after 5 minutes.
• During playback function other than normal playback, horizontal
noise bars may appear in the picture, the colour of the picture may
be unstable, or the picture may be otherwise distorted.
When you play back a tape recorded in the LP mode, the picture
may be in black and white.
When you play back a tape recorded in the EP mode, the picture
and the sound may be distorted.
However, these are not malfunctions.
10
Press the [Play] (26) on the remote control for more than
5 seconds.
The [R] indication appears on the TV screen.
• If [OSD] is set to [OFF] (See page 29), the [R] indication will
not appear in repeat playback mode.
To Rewind the Tape a Little to View the
Same Scene Again (Replay Function)
Press the [REPLAY] (5).
Rewind the tape a little from its present position and play it
back again.
• During review playback, when you press this button, the
VCR briefly switches over to cue playback and play it back
again.
• When the VCR is in the stop, rewind, fast-forward, slow
playback, or standby mode, the Replay function does not
work.
To Stop Playback Automatically
(Playback Off Timer Function)
If you set the playback duration, the playback will stop
automatically.
After the set playback time has elapsed, the VCR
automatically stops playback and switches off.
During normal playback, press the [Play] (26) on the VCR
for more than 2 seconds to put the VCR in the Playback Off
Timer mode.
After that, press this button on the VCR repeatedly until the
desired playback duration is displayed on the VCR display.
• Repeatedly pressing this button changes the indication in
the following order.
Counter display (normal playback mode)
#30 (min.)#60 (min.)#120 (min.)
#180 (min.)#240 (min.)
#Counter display (normal playback mode)
To stop midway
Press the [Stop] (9).
To Ensure High Playback Picture Quality
(3D DNR Function)
To activate the 3-Dimensional Digital Noise Reduction
(3D DNR) function, press the [3D DNR] (40), so that the
3D DNR lamp is lit.
• We recommend that you leave this function activated for
normal use of the VCR. However, when performing editing,
press the [3D DNR] (40) to turn this function off so that the
3D DNR lamp is not lit, to ensure editing with optimal
picture quality.
To Ensure a Stable and Shake-Free
Playback Picture Quality (TBC Function)
This function improves the horizontal shaking and the stable
distortion in the vertical lines which tend to take place when
tapes are played back.
TV screen
The Time Base Corrector (TBC)
function is activated if the indicator
TBC ON
(on the TV screen) is [TBC ON]. Use
the [TBC] (47) to check the status or
to activate the function. If you press
this button once, the TBC indicator
(on the TV screen) will display
current status ([TBC ON] or
[TBC OFF]). And if you press the button once again, the
status will change ([TBC ON]/[TBC OFF]).
• We recommend that you leave this function activated for
normal use of the VCR.
• The TBC function does not work during playback of a video
cassette recorded in the MESECAM system.
• When you cannot ensure high playback picture quality,
press the [TBC] (47) to turn this function off so that the
[TBC OFF] indication appears on the TV screen.
• When switching the TBC function, the picture and the
sound may be distorted. However these are not
malfunctions.
11
Recording
1) Insert a video cassette with an intact erasure prevention
tab.
• If it has already been inserted, press the [VCR-ON/
OFF] (1) to turn the VCR on.
2) Select the TV station using the [Channel]
(33). (Set the [VCR/TV] (23) to [VCR].)
• It is also possible to select by pressing
the [Numeric] (2).
3) Press the [REC] (28) to start recording.
REC
2) Press the [REC/OTR] (52) on the VCR repeatedly to
select the desired recording duration.
• Every time you press this button, the recording duration
indicated in the VCR display changes in the following
order.
To stop the OTR recording before the end
Press the [Stop] (9).
To Select the Desired Tape Speed
Press the [SP/LP/EP] (21) before recording.
• SP provides standard recording time and
optimum picture quality.
LP provides double recording time with
slightly reduced picture quality.
EP provides triple recording time with slightly reduced
picture quality.
SP
To Pause Recording
REC
To View One TV Programme while
Recording Another TV Programme
After pressing the [REC] (28) to start recording, select on
your TV the programme position of the TV programme that
you want to view.
Notes:
• When playing back an E300 cassette recorded in the LP or EP
mode, some picture distortion may occur. However, this is not a
malfunction.
• The recording pause mode will be automatically cancelled after
5 minutes and return to the stop mode.
• The tape recorded in the EP mode on this VCR cannot be played
back on the other VCR without EP mode function.
• On the other VCR (even with EP mode function), when you play
back the tape recorded in the EP mode, the picture may be
distorted. However, this is not a malfunction.
To Display the Approximate Remaining
Tape Time
See page 29 to set the tape length.
Press the [OSD/DISPLAY] (18) repeatedly until the
remaining tape time appears on the VCR display.
• Pressing the [OSD/DISPLAY] (18) once makes the
On Screen Display appear; after that, pressing it repeatedly
changes the indication in the following order.
• For certain cassettes, the remaining tape time may not be
displayed correctly.
Clock#Counter#Remaining Tape Time#Clock
12
1) Press the [REC/OTR] (52) to start recording.
Counter display (normal recording mode)
#30 (min.)#60 (min.)#120 (min.)
#180 (min.)#240 (min.)
#Counter display (normal recording mode)
4) Press the [Stop] (9) to stop recording.
Press the [Pause/Slow] (29) during
recording.
Press it again to continue recording.
To Select the Recording Duration and
Perform Timer Recording
(OTR=One-Touch Recording)
Note:
• This function also works during Direct TV Recording.
To Prevent Accidental Erasure of
Recorded Contents
Break out the erasure prevention
tab after recording.
If you insert a video cassette with a
broken out erasure prevention tab
and press the [REC] (28), the [1]
indication flashes on the VCR
display to indicate that recording is not possible.
In this case, cover the tab hole with two layers of adhesive
tape.
To Immediately Record the Same TV
Programme That You Are Viewing on the
TV
(Direct TV Recording)
This function allows you to immediately start recording the
same programme that you are viewing on the TV.
The programme position selected on the VCR automatically
changes to that of the TV programme that you are viewing
on the TV.
• Your TV must be equipped with the [Q Link] function.
• The VCR must be connected to the TV via a fully-wired
21-pin Scart cable.
1) Press the [DIRECT TV REC] (36).
• Recording of the TV programme that you are viewing on
the TV starts.
• In some cases, it may not be possible to change the
programme position on the TV during Direct TV
Recording.
• Do not press the [AV LINK] (35) during Direct TV REC,
otherwise the recording may not be performed correctly.
2) Press the [Stop] (9) to stop recording.
Recording from an external source
(Assemble Editing)
To Make an S-VHS Recording on a
Cassette
Recording from an external source, for example from a video
movie camera, can be performed.
For recordings that you intend to play back on this VCR or
another S-VHS VCR, we recommend that you record in the
S-VHS format to take advantage of this system’s superior
picture quality. Be sure to use a cassette bearing the S-VHS
logo.
Insert an S-VHS cassette so that the S-VHS indicator is lit.
Recording is performed in the S-VHS format.
• When a cassette that was recorded in the S-VHS format is
played back on a VHS VCR without S-VHS quasi playback
function, noisy playback picture will appear.
(42)
(43)
EJECT
3D DNR
EXT LINK
TBC
A.DUB
INSERT
(44) (56)
Video movie camera
(57)
Other VCR
• Connect a video movie camera or a VCR to this VCR, as
shown in the illustration.
• Press the [INPUT SELECT] (3) to select the AV Input
according to the socket(s) on the VCR to which the source
unit has been connected.
A1: When connected to the AV1 21-pin Scart socket
A2: When connected to the AV2 21-pin Scart socket
• Make sure that [AV2] is set to [EXT]. (See page 29.)
A3: When connected to the Video Input socket/S-Video
Input socket and Audio Input sockets on the front
panel of the this VCR
• Use the L connector for operations in the normal
(monaural) mode.
1) Press the [Play] (26) to start playback.
2) At the point where you want to join a new scene, press
the [Pause/Slow] (29) to put it in the still playback mode.
3) Press the [REC] (28) to put it in the recording pause
mode.
• If you leave the VCR in the recording pause mode for
more than 5 minutes, the VCR automatically switches
over to the stop mode to protect the video heads.
4) Start playback on the source unit and search for the point
from which you want to record (copy) onto this VCR.
5) When that point is reached, press the [Pause/Slow] (29)
again to start recording the new picture and sound from
the playback unit.
6) To record (copy) additional scenes, press the [Pause/
Slow] (29) to put this VCR in the recording pause mode
and then perform above step again.
7) At the point where you want to stop recording, press the
[Stop] (9) to finish recording.
Hint:
• The new sound is recorded on both the Hi-Fi audio tracks and the
normal audio track. The sound recorded on the normal audio track
is always in mono.
If you want to make a recording in the VHS format in order to
play it back on a VHS VCR, set the [S-VHS] to [OFF], so that
the S-VHS indicator goes out. (See page 29.)
Note:
• When receiving SECAM signals or when you set [Video system] on
the Manual tuning menu or [TV system] on the Other settings
menu to [MESECAM] (see pages 27 and 29), recording is
automatically made in the VHS format even if the S-VHS indicator
is lit.
To Record a VHS Cassette with S-VHS
Quality (S-VHS Expansion Technology)
S-VHS ET stands for Super-VHS Expansion Technology.
This function allows recording and playback in S-VHS picture
quality on a normal VHS cassette.
Recording in this format is only possible in the SP
mode.
If LP or EP mode is selected while setting up a timer
recording, the S-VHS ET indicator turns off and
S-VHS ET is cancelled.
Insert a VHS cassette and set the [S-VHS ET] to [ON], so
that the S-VHS ET indicator is lit. (See page 29.)
Recording is performed in the S-VHS picture quality.
• When a cassette that was recorded using S-VHS ET
function is played back on a VHS VCR without S-VHS
quasi playback function, noisy playback picture will appear.
Notes:
• We recommend that you use cassettes other than type E300.
• When receiving SECAM signals or when you set [Video system] on
the Manual tuning menu or [TV system] on the Other settings
menu to [MESECAM] (see pages 27 and 29), recording is
automatically made in the VHS format even if the S-VHS ET
indicator is lit.
• If you want to record and playback with highest possible picture
quality or store the cassettes for a long time, we recommend that
you use S-VHS cassettes and record in the S-VHS format.
• If you record in the S-VHS ET format, the picture quality may not
be very good with certain types of cassettes.
To avoid negative surprises, we recommend that you make a trial
recording and confirm that the quality of the recorded picture is
satisfactory.
To ensure optimum picture quality, we recommend the use of highquality type cassettes.
(continues on the next page)
13
• We recommend entering [S-VHS ET] into the cassette label on any
cassette that you have recorded using the S-VHS ET function so
that you will be able to distinguish such cassettes from VHS
cassettes.
The following table lists the playback formats that are
compatible with this VCR’s recording standard.
Cassette
VHS
S-VHS
Recording
format
Compatible Playback
Equipment
VHS
(SP/LP/EP)
VHS, S-VHS,
VHS with SQPB*1
S-VHS ET
(SP)
S-VHS*2,
VHS with SQPB
VHS
(SP/LP/EP)
VHS, S-VHS,
VHS with SQPB
S-VHS
(SP/LP/EP)
S-VHS,
VHS with SQPB
Satellite or Digital Receiver
Connecting the VCR to a Satellite
Receiver or Digital Receiver
If the satellite receiver is equipped with a 21-pin scart socket
1
3
2
SQPB stands for S-VHS quasi playback.
*2
Some models are not compatible.
1 Satellite receiver (not supplied)
2 21-pin Scart socket
• If your satellite receiver has a VCR socket, connect the cable to it.
3 21-pin Scart cable (not supplied)
To Manually Adjust the Audio Recording
Level
Set [AV2] to [EXT], [EXT LINK 1] or [EXT LINK 2].
For details, see page 29.
*1
This VCR adjusts the recording level automatically to prevent
sound distortion due to excessive peaks.
However, if you want to manually adjust the audio recording
level (except mono), perform the operation steps below
before you start the actual recording. We recommend you to
adjust the level so that it peaks at approximately +4 dB on
the recording level indicator.
If the satellite receiver is not equipped with a 21-pin scart
socket
4
1
2
5
Before recording, press the [AUDIO] (17).
To adjust the left (L) and right (R)
channels simultaneously:
• Press the [Cursor] (38) 21 to
adjust the audio recording level.
3
Audio Rec Level
(Stereo)
L
R
r 2
r 2
L
–¶40 25 12 3 0 3 6 9 r12 dB
R
To adjust the left (L) and right (R)
channels individually, use either of
the following two operation methods:
• Press the [Cursor] (38) 34 to select either the left (L) or
right (R) channel and individually adjust their audio
recording level with the [Cursor] (38) 21.
Press the [AUDIO] (17) repeatedly to select either the left
(L) or right (R) channel and individually adjust their audio
recording level with the [Cursor] (38) 21.
Example:
When the left (L) channel is
selected.
Press the [EXIT] (27) to exit the On
Screen Display.
14
Audio Rec Level
(Stereo)
L
R
r4
s3
L
–¶40 25 12 3 0 3 6 9 r12 dB
R
6
1
2
3
4
5
6
Satellite receiver (not supplied)
Aerial Input socket
Aerial Output socket
Aerial (not supplied)
Aerial lead (not supplied)
RF coaxial cable (not supplied)
Hint:
• The RF output channel of the satellite receiver should be adjusted
away from channel 36, which is used by the VCR, e.g. re-adjust to
channel 33.
Linked Timer Recordings by External
Equipments (EXT LINK)
If an external equipment (for example a satellite receiver)
with a timer function is connected to the AV2 socket of this
VCR by a 21-pin cable, it is possible to control the recording
of the VCR from this equipment.
Connecting a Decoder
Decoder here refers to the device used to decode scrambled
broadcasts (Pay TV).
Make sure that [AV2] is set to [EXT LINK 1] or [EXT LINK 2].
(See page 29.)
Timer programming has to be done and switch to the timer
recording standby mode on the external equipment, refer to
its operating instructions.
1) Press the [EXT LINK] (46) on the VCR to switch the VCR
over to the timer recording standby mode.
• As long as a video picture is
being transmitted by the
Satellite or Digital Receiver, the
VCR will record it.
This notice is displayed on the
TV screen.
(Only when [EXT LINK 2] is
selected)
To delete it, press the [OK] (24).
VCR now recording
this programme
2) To cancel the external control, turn off the timer recording
standby mode of the VCR by pressing the [EXT LINK]
(46) again.
Notes:
• To switch TV automatically to the picture from the VCR in playback
mode, connect the AV1 socket of this VCR to the TV by a 21-pin
cable.
• Some external equipments may not work with this function, refer to
its operating instructions.
Connecting a Stereo Amplifier
1
3
2
1 Audio cable (not supplied)
2 Stereo amplifier (not supplied)
3 Audio Input sockets
1) Connect an Audio cable (not supplied) to the Audio
Output sockets on the VCR and to Audio Input sockets
on the stereo amplifier.
2) Connect the stereo amplifier’s mains lead to an AC mains
socket.
1
3
2
1 Decoder (not supplied)
2 21-pin Scart socket
3 21-pin Scart cable (not supplied)
1) Connect a 21-pin Scart cable (not supplied) to the AV2
21-pin Scart socket on the VCR and to the 21-pin Scart
socket on the decoder.
2) Connect the decoder’s mains lead to an AC mains
socket.
3) Set [AV2] to [DECODER].
For details, see page 29.
AV Link Function
If the VCR is connected to the TV via a 21-pin Scart cable,
you can use the [AV LINK] (35) to switch the TV from normal
TV reception over to the video playback channel (AV input)
(and vice versa). In the VCR mode (when the [VCR]
indication in the VCR display is lit), the TV is switched to the
video playback channel (AV input). In the TV mode (when
the [VCR] indication is not lit), the TV is switched to TV
reception.
• When you press the [MENU] (7) to display the menu on
the TV screen, the TV is also automatically switched to the
VCR mode, however, the [VCR] indication does not appear
in this case.
• When you start playback on the VCR, the TV is
automatically switched to the VCR mode. However, during
playback, it is not possible to switch the TV back to the TV
mode.
• If a Pay TV station has been selected on the VCR when
you switch to the TV mode, the picture on the TV is
scrambled when you select a Pay TV station on the TV.
In this case, either switch to the VCR mode or select the
AV input on the TV.
Hint:
• [RGB] means separate Red/Green/Blue colour signals.
If you connect a TV equipped with RGB input capability to the AV1
socket on this VCR, and a decoder equipped with RGB output
capability to the AV2 socket, the TV can receive RGB signal input
from the decoder via the VCR.
15
Timer Recording
This VCR lets you programme up to 16 TV programmes
(including weekly and daily programmes) for unattended
recording up to one month in advance.
To Programme with the On Screen Display
(OSD)
This method offers easy step-by-step programming with the
remote control while you view the prompts on the TV screen.
Example:
Programming the timer recording of a TV programme
broadcast on programme position 2 (ZDF) from 20:00 to
21:30 on 27 October.
Panasonic VCR
Timer recording
1/2
Pos
Start Stop
VPS
PDC
Name DATE ON OFF
1) Press the [PROG./CHECK] (14)
to display the menu for
1. jjjjj jj/jj jj:jj jj:jj j jjj
programming timer recordings
2. jjjjj jj/jj jj:jj jj:jj j jjj
3. jjjjj jj/jj jj:jj jj:jj j jjj
4. jjjjj jj/jj jj:jj jj:jj j jjj
on the TV screen.
• Alternatively, you can press the [MENU] (7) and then
select [Timer recording].
2) Press the [CH] (Red) (12) to select the programme
position of the desired TV station.
• As an alternative method, after pressing the [CH] (Red)
(12), you can use the [Cursor] (38) 3421.
3) Press the [DATE] (Green) (11) to set the date on which
the TV programme will be broadcast.
4) Press the [ON] (Yellow) (10) to set the starting time.
• When it is kept pressed, the indication changes in
30-minute intervals.
5) Press the [OFF] (Blue) (22) to set the ending time.
6) Press the [SP/LP/EP] (21) to set the desired tape speed.
• Regarding the [A] indication, refer to page 17.
7) Press the [Cursor] (38) 3421 to set [VPS/PDC] to
[ON] or [OFF] [jjj].
• See page 17 for VPS/PDC recording.
8) Press the [OK] (24) to conclude
the setting.
Panasonic VCR
Timer recording
1/2
Pos
Start Stop
VPS
PDC
Name DATE ON OFF
DF
2 7 /1 0 2 0 :0 0 2 1 :3 0 SP O N
9) Press the [TIMER] (20) to switch 1.3.2. Zjjjjj
jj/jj jj:jj jj:jj j jjj
jjjjj jj/jj jj:jj jj:jj j jjj
4. jjjjj jj/jj jj:jj jj:jj j jjj
the VCR over to the timer
5
/
recording standby mode.
• Check that [Á] is lit on the VCR display.
If it is flashing, check the timer recording details again.
(See page 17.)
16
To Programme with the SHOWVIEW
Function
The SHOWVIEW numbers make it extremely easy to set the
VCR for timer recording.
The duration of a timer recording programmed with
SHOWVIEW number may be slightly longer than the actual
duration of the TV programme.
SHOWVIEW is a trademark of Gemstar Development
Corporation. The SHOWVIEW system is manufactured
under licence from Gemstar Development Corporation.
Example:
Programming a timer recording of a TV programme with the
SHOWVIEW number 721114
1) Press the [ShowView] (30) to
display the menu for entering the
SHOWVIEW number on the TV.
ShowView
Panasonic VCR
7 2 1 1 1 4
2) Press the [Numeric] (2) to enter
the SHOWVIEW number.
• If you have entered a wrong digit, press the [Cursor]
(38) 2 and then enter the correct digit.
3) Press the [OK] (24) to display the programmed content.
4) Press the [SP/LP/EP] (21) to set the desired tape speed.
• Regarding the [A] indication, refer to page 17.
• To change timer recording programmings, use the
[Cursor] (38) 3421, the [CH] (Red) (12), [DATE]
(Green) (11), [ON] (Yellow) (10) or [OFF] (Blue) (22).
• See page 17 for VPS/PDC recording.
5) Press the [OK] (24) again to conclude the settings.
6) Press the [TIMER] (20) to switch the VCR over to the
timer recording standby mode.
• Check that [Á] is lit on the VCR display.
If it is flashing, check the timer recording details again.
(See page 17.)
To Suspend the Timer Recording Standby
Mode
Press the [TIMER] (20) so that the [Á] indication on the
VCR display disappears.
After you have finished using the VCR, be sure to reactivate
the timer recording standby mode by pressing the [TIMER]
(20) again, otherwise the programmed timer recording will
not be performed.
Note:
• If the VCR is not put in the timer recording standby mode at the
latest 10 minutes before the programmed timer recording starting
time, the [Á] flashes on the VCR display. In this case, press the
[TIMER] (20) to put the VCR in the timer recording standby mode.
If [ss] Appears under [Pos/Name] after
Entering a SHOWVIEW Number
To Check, Change or Cancel Timer
Recording Programmings
Pos/Name stands for Programme Position/TV Station Name.
Normally, the name of the TV station or the number of the
programme position is displayed under [Pos/Name].
However, if the [ss] indication appears, follow the operation
steps below.
1) Press the [PROG./CHECK] (14) to display the timer
recording programmings on the TV screen.
• When the VCR is in the timer recording standby mode
for a VPS/PDC recording, the On Screen Display may
be distorted.
Press the [CH] (Red) (12) repeatedly to select the
programme position on which the TV programme to be
recorded will be broadcast.
2) Press the [Cursor] (38) 34 to select the programming
that you want to change or cancel.
After you have entered the information of a TV station, it
remains stored in the VCR’s memory, and you do not need
to enter it again in the future.
Setting the Recording Date/Day(s)
Press the [DATE] (Green) (11) to select the recording date
(1 to 31), daily timer recording date (Su–Sa, Mo–Sa or Mo–
Fr) or weekly timer recording date (Su to Sa).
• Programming a timer recording (setting the date) is
possible up to one month ahead of the TV programme’s
broadcasting date and time. Daily and weekly timer
recordings will continue until you cancel them.
Auto SP/LP Change Function
If the VCR determines that the remaining tape time is
insufficient to record the whole programme, LP mode is
automatically selected to ensure that the programme will be
recorded as long as possible.
Press the [SP/LP/EP] (21) to select [A].
• This function cannot change the recording speed to the EP
mode.
• If the remaining tape time is still not sufficient even in the
LP mode, the programme cannot be recorded to its end.
• If the recording speed changes from SP to LP during a
timer recording, some brief picture distortion occurs at that
point.
3) Press [OK] (24).
4) To change or cancel timer recording programmings, use
the [Cursor] (38) 3421, the [CH] (Red) (12), [DATE]
(Green) (11), [ON] (Yellow) (10), [OFF] (Blue) (22) or
[CANCEL] (13).
5) Press the [OK] (24) to conclude the setting.
6) Press the [EXIT] (27) to exit the On Screen Display.
Note:
In some cases, for example as listed below, the programming of a
timer recording remains stored in the memory until 4 a.m. the next
day. However, this is not a malfunction.
• When a timer recording was not performed up to the TV
programme’s ending time because the remaining tape time was
not sufficient.
• When you have stopped the timer recording while it was being
performed.
To Check the Total Timer Recording
Programming Time
3.
/
:
:
4. jjjjj jj/jj jj:jj jj:jj j jjj
The total time indication for timer
5. jjjjj jj/jj jj:jj jj:jj j jjj
6. jjjjj jj/jj jj:jj jj:jj j jjj
recording programming lets you
7. jjjjj jj/jj jj:jj jj:jj j jjj
8. jjjjj jj/jj jj:jj jj:jj j jjj
check how many programmes can
Total (SP)
90min
be recorded by comparing with the
remaining tape time in the VCR display.
• The total time is calculated in the SP mode.
• The total time cannot be calculated when setting Daily/
Weekly timer recording.
VPS/PDC Function
If a TV programme, for example a football game runs longer
than scheduled, is shortened or starts earlier or later, this
function synchronises the recording start and stop with the
actual broadcasting start and stop of the TV programme.
Press the [Cursor] (38) 3421 to make the [ON] indication
appear.
• [ON] must be displayed under [VPS/PDC] on the TV
screen.
• The TV station must broadcast VPS/PDC signals.
• The programme starting time must be set correctly to the
starting time listed in the newspaper/magazine.
17
Intelligent Timer Function
Many TV programmes are broadcast as a series, like
dramas or Soaps, on different days of the week. These are
often broadcast on the same channel and time each day.
The Intelligent Timer Function remembers the channel
number along with the start and end times of the last
8 programmes that you have recorded using timer recording
or SHOWVIEW.
By simply pressing the [I-TIMER] (15) the details of the last
8 timer recording programmes are displayed on the screen
with today or tomorrows date, (depending on whether the
time set has elapsed yet). The details of each of the
8 memorised recordings can be used or changed to set a
new timer recording.
Notes for using this function.
Details of up to 8 timer recordings are held in memory and
are used to repeat a previous recording of a TV programme
but on a new date and time. The Intelligent Timer Function
cannot be used until at least one timer recording or
SHOWVIEW programme has been recorded.
Details of Weekly or Daily Timer Recording are not
memorised and cannot be used with this function.
Using the Intelligent Timer function
Intelligent Timer Function has two different operation A
and B.
Operation A
When you want to set the programme as it is:
1) Press the [I-TIMER] (15) to
display the menu.
2) Press the [Cursor] (38) 34 or
[I-TIMER] (15) to select the
desired programme.
3) Press [TIMER] (20) to store the
programming and the VCR will
switch to the timer recording
stand-by mode.
• The screen will change to the
Timer recording listing.
INTELLIGENT TIMER
Panasonic VCR
27/ 10/ 02
Pos
Name Date
Start
Stop
ZDF
20:00
21:30
27/10
VPS
PDC
SP
ON
1. Z D F
2 7 /1 0 2 0 :0 0 2 1 :3 0 SP O N
2. jjjjjjj/jjjj:jjjj:jj j jjj
3.jjjjjjj/jjjj:jjjj:jj j jjj
4.jjjjjjj/jjjj:jjjj:jj j jjj
5.jjjjjjj/jjjj:jjjj:jj j jjj
6.jjjjjjj/jjjj:jjjj:jj j jjj
7.jjjjjjj/jjjj:jjjj:jj j jjj
8.jjjjjjj/jjjj:jjjj:jj j jjj
Total (SP)
90min
1) Press the [I-TIMER] (15) to display the menu.
18
1. Z D F
2.
3.
4.
5.
6.
7.
8.
2 7 /1 0 2 0 :0 0 2 1 :3 0
/
:
:
/
:
:
/
:
:
/
:
:
/
:
:
/
:
:
/
:
:
SP O N
4) When you are happy with all of the settings press the
[OK] (24).
5) Press the [TIMER] (20) to switch the VCR over to the
timer recording stand-by mode.
Note:
• Check that the [Á] is lit on the VCR display.
If it is flashing, check the timer recording details again.
(See page 17.)
Protecting programmes
1) Press the [I-TIMER] (15) to display the menu.
2) Press the [Cursor] (38) 43 to
select the programme details
that you want to protect, then
press the [Cursor] (38) 1 to lock
it. A lock symbol appears to the
left of the programme. Locked
programmes cannot be deleted.
INTELLIGENT TIMER
Panasonic VCR
27 / 10 / 02
Pos
Name
Date
Start Stop
ZDF
ARD
¢¢¢05
27/10
27/10
28/10
20:00 21:30
20:00 21:30
10:30 11:30
VPS
PDC
SP
SP
EP
ON
ON
sss
Releasing the protection
1) Press the [I-TIMER] (15) to display the menu.
2) Press the [Cursor] (38) 43 to
select the programme details
that you want to release, then
press the [Cursor] (38) 2.
The lock symbol disappears.
INTELLIGENT TIMER
Panasonic VCR
27/ 10/ 02
Pos
Name Date
Start
Stop
ZDF
20:00
21:30
27/10
VPS
PDC
SP
ON
Panasonic VCR
Timer recording
1/2
Pos
Start Stop
VPS
Name DATE ON OFF
PDC
Operation B
When you want to edit the item of programme:
2) Press the [Cursor] (38) 34 or
[I-TIMER] (15) to select the
desired programme. You can
now use the selected
programme details if they are
correct or change them if you
need to adjust the date etc.
Panasonic VCR
3) Press the [OK] (24). To change
Timer recording
1/2
Pos
Start Stop
VPS
the details (date etc.) press the
Name DATE ON OFF
PDC
[Cursor] (38) 21 to select the
jjjjjjj jjjj jjjj jj j jjj
jjjjjjj jjjj jjjj jj j jjj
jjjjjjj jjjj jjjj jj j jjj
item that you want to change.
jjjjjjj jjjj jjjj jj j jjj
jjjjjjj jjjj jjjj jj j jjj
jjjjjjj jjjj jjjj jj j jjj
Then press the [Cursor] (38)
jjjjjjj jjjj jjjj jj j jjj
Total (SP)
90min
34 or the [Numeric] (2) to
change the item.
It is also possible to use the [CH] (Red) (12), [DATE]
(Green) (11), [ON] (Yellow) (10), [OFF] (Blue) (22), or
[SP/LP/EP] (21) to select each item directly.
INTELLIGENT TIMER
Panasonic VCR
27/ 10/ 02
Pos
Name Date
Start
Stop
ZDF
20:00
21:30
27/10
VPS
PDC
SP
ON
Deleting the recording details
Locked programmes must be unlocked before they can be
deleted (see above for details).
Press the [Cursor] (38) 43 to select the programme details
that you want to delete, then press the [CANCEL] (13).
Notes:
• The Intelligent Timer Function can memorise the details of up to 8
timer recordings. If further timer recordings are made the Intelligent
Timer Function will memorise the details of the new recording and
the details of the oldest recording will be lost. To prevent losing a
regularly used programme make sure the programme details are
locked (see above).
• When Auto Setup Restart, Download Restart, shipping condition or
etc. is done, all programmes of Intelligent Timer will be deleted
automatically even if the programmes are protected.
Tape Library System
This advanced system makes it quick and easy to check the contents of an inserted cassette. It can also be used to quickly find
out which cassette in your collection contains a desired programme.
Whenever a cassette with an intact erasure prevention tab is inserted, the VCR first performs a brief check and then shows the
number of the cassette and its contents on the On Screen Display. To start playback of the desired programme, simply select it
on the On Screen Display and press the [LIBRARY/SEARCH] (4).
To index each recorded programme for the Tape Library System, this VCR automatically registers the Library data (cassette
number, title*1, name of TV station*2, recording time/date*3, etc.) in the VCR’s memory*4 when the recording is performed.
*1
The name of the TV station or the programme position number is entered instead.
In case of a TV station with Teletext information, the title of the TV programme is entered automatically, provided the
[Title page] is correctly set. (See page 27.)
*2
In case of a TV station with Teletext information, the name of the TV station is registered automatically.
*3 The VCR’s clock must be set correctly.
*4
The VCR’s memory can hold a maximum of 128 programmes (or 30 tapes).
Precautions for Recording:
• We recommend that you use new tapes for recording.
• Each recorded programme should have length of at least 15 minutes in the SP or LP mode.
• Each recorded programme should have length of at least 25 minutes in the EP mode.
• No Tape Library data is registered during insert editing.
• If you copy a cassette with a cassette number, the tape library data may not be copied correctly. Therefore, the VCR’s Tape
Library System may not work correctly with such a copied cassette.
• When a new recording is made over existing recordings on a tape, the original programmes may be deleted from the list.
• The VCR’s power back-up system protects the Tape Library data in the memory in case of a power failure and stores it for up to
5 years when the VCR is not connected to an AC mains socket.
• When the recording is completed and you eject the cassette, the cassette number remains displayed on
the VCR display for approximately 30 seconds. Be sure to write this number on the cassette label.
• When the VCR’s entire memory area has been used up by the Tape Library data, the indication
[Library memory full !] appears on the TV screen for several seconds when Tape Library screen is opened.
After this, recording is still possible but no new Tape Library data can be stored. In this case, delete the
Tape Library data that you do not need any more before making further recordings. (See page 21.)
Library memory
full !
How to Read the Tape Library Contents
Title:
In case of a TV station with Teletext information, the title
of the TV programme is entered automatically, provided
the [Title page] is correctly set.
Manually adding or editing the title is also possible.
TV Station Name:
For a TV programme that was broadcast with Teletext
information either when the broadcaster does not provide any
TV programme pages or the title page is not correctly set.
Programme Position Number:
For a TV programme that was broadcast without
Teletext information.
Cassette Number
Content of
Content
oftape:
tape:5 5
Panasonic
VCRVCR
Panasonic
VCR
Panasonic
1/2
1/1
Title
Date
Football
We
2 ZDF
(18:58) We 18.04.01
(19:08) Sa 28.04.01
(19:18) Fr 11.05.01
3 ¢¢¢03
TV ch 21
Recording Start Time
Recording Date
4.04.01
Direct TV Rec:
For a TV programme recorded with the Direct TV Recording function.
Notes:
• If you press the [ON] (Yellow) (10) on the Tape Library screen, the total number of titles and tapes registered in the VCR are
displayed.
• The total titles and total tapes of the VCR are automatically displayed when Tape Library screen is
Panasonic VCR
Content of tape: 28
1/1
opened if either the total number of titles are 120 or more (or the total number of tapes are 28 or more). Title
Date
2 ZDF
(18:58) We 18.04.01
5 Find space to record 6
5 Intro-Jet Scan 6
Total Titles :121/128 (MAX)
Total Tapes : 28/30 (MAX)
19
To Check What Programmes Are
Recorded on the Inserted Video Cassette
and To Play Back a Desired Programme
First, perform the operation steps explained on page 9.
Then press the [Cursor] (38) 34 to select the programme
and then press the [LIBRARY/SEARCH] (4).
Panasonic VCR
Content of tape: 30
1/1
• After the selected programme has
Title
Date
been found, the current tape
2 ZDF
(18:58) We 18.04.01
contents list disappears and
5 Find space to record 6
5 Intro-Jet Scan 6
playback starts automatically.
• When you select the [Find space to
record] indication at the bottom of
the On Screen Display and press
the [LIBRARY/SEARCH] (4), the VCR automatically winds
the tape to position from which you can start recording.
• When you select the [Intro-Jet Scan] indication at the
button of the On Screen Display and press the [LIBRARY/
SEARCH] (4), Intro-Jet Scan starts. (See page 22.)
To Check the Cassette Number Again If the Cassette
Number Check of a Cassette that Has a Cassette
Number Did Not Work Correctly, or If You Cancelled the
Cassette Number Check Midway:
• Rewind the tape to its beginning.
Panasonic VCR
Content of tape: 30
1/1
1) Press the [LIBRARY/SEARCH]
Title
Date
(4).
2 ZDF
(18:58) We 18.04.01
• The Cassette Number Check
5 Find space to record 6
5 Intro-Jet Scan 6
starts automatically. Wait a few
moments until the check is
completed. When it is
completed, the cassette number
and its contents (recorded programmes) appear on the
On Screen Display and the cassette number appears
on the VCR display.
If the cassette number does not appear and the following
indication is displayed:
Press the [INDEX] (31) L once Content of tape: -Title
Date
to start the search for a
5 Intro-Jet Scan 6
programme. When playback
starts, wait a few moments and
Tape ID could not
then press the [LIBRARY/
be detected
SEARCH] (4).
• If the cassette number still does
not appear, repeat this process until it appears.
Panasonic VCR
1/1
Hint:
• Even after you have pressed the [Cursor] (38) 34 to select the
[Find space to record] and the VCR has located the tape position
from which to make a new recording, we recommend you to
confirm that this tape position is really suitable, before you start
recording.
Note:
• In the case of certain cassettes, for example cassettes recorded on
another NV-HS930 model VCR or cassettes whose cassette
number was deleted from the Tape Library data, the cassette
number and contents (recorded programmes) are not displayed.
20
To Check on Which Cassette a Desired
Programme Is Recorded
If you press the [LIBRARY/SEARCH] (4) when no cassette
is inserted, operation steps 1 and 2 below are not necessary
In this case, start from operation step 3.
1) Press the [MENU] (7) and then
press the [Cursor] (38) 34 to
select [Tape Library].
Panasonic VCR
Main menu
Timer recording
Tape Library
Tuning
2) Press the [OK] (24).
• If a cassette is already inserted,
its cassette number and
contents appear.
• If no cassette is inserted, the
lowest cassette number and its
contents appear.
Content of tape: 30
3) Press the [Cursor] (38) 21 to
display the contents of each
cassette one after another, and
search for the desired
programme.
Library for tape: 5
4) After you have found out which
cassette contains the desired
programme, insert that cassette
into the VCR.
Clock setting
Other settings
Title
Panasonic VCR
1/1
Date
2 ZDF
(18:58) We 18.04.01
5 Find space to record 6
5 Intro-Jet Scan 6
Title
A2 AV2
Panasonic VCR
1/1
Date
(10:52) Th 18.01.01
1 ARD
( 4:04) Fr
2.02.01
3 ¢¢¢03
( 4:15) Fr
2.02.01
(11:20) Tu
6.02.01
1 ARD
5) To play back the desired programme, press the [Cursor]
(38) 34 to select that programme and then press the
[LIBRARY/SEARCH] (4).
• After the selected programme has been found,
playback starts automatically.
To Manually Enter or Editing a Title
To Delete the Tape Library Data
If you press the [LIBRARY/SEARCH] (4) when no cassette
is inserted, operation steps 1 and 2 below are not necessary
In this case, start from operation step 3.
If you press the [LIBRARY/SEARCH] (4) when no cassette
is inserted, operation steps 1 and 2 below are not necessary.
In this case, start from operation step 3.
1) Press the [MENU] (7) and then
press the [Cursor] (38) 34 to
select [Tape Library].
Panasonic VCR
Main menu
Timer recording
Tape Library
2) Press the [OK] (24).
Tuning
2) Press the [OK] (24).
Clock setting
Library for tape: 1
Title
Panasonic VCR
1/1
Date
1 ARD
( 9:07) Th 18.01.01
A2 AV2
( 9:18) Th 18.01.01
A2 AV2
( 9:23) We 7.02.01
4 ¢¢¢04
Library for tape: 5
Title
( 0:01) Sa
6.01.01
3) Press the [Cursor] (38) 21 to
search for the cassette whose
Tape Library data you want to
delete.
4) Press the [Cursor] (38) 34 to
select the desired programme.
Panasonic VCR
Library Edit
( 4:04) Fr
2.02.01
3 ¢¢¢03
( 4:15) Fr
2.02.01
(11:20) Tu
6.02.01
1 ARD
Panasonic VCR
Library for tape: 5
1/1
Title
Date
A2 AV2
(10:52) Th 18.01.01
( 4:04) Fr
2.02.01
Are you sure you want to
delete this title ?
5) Press the [CH] (Red) (12).
Tape 1
5) Press the [DATE] (Green) (11).
• The menu for entering (or
changing) the title appears.
Old title
: A2 AV2 ( 9:18)
New title
:
6) Press the [Cursor] (38) 3421 to enter (or change) the
title.
• Up to 15 characters can be entered for one title.
• To correct an input error, press the [Cursor] (38) 2 and
enter the correct character.
7) Press the [OK] (24).
• When you enter (or change) the
title, the recording start time,
which was displayed before,
disappears.
8) Press the [EXIT] (27) to exit the
On Screen Display.
(10:52) Th 18.01.01
1 ARD
1 ARD
4) Press the [Cursor] (38) 34 to
select the desired programme.
Panasonic VCR
1/1
Date
A2 AV2
Other settings
3) Press the [Cursor] (38) 21 to
display the contents of each
cassette one after another, and
search for the programme whose
title you want to enter (or
change).
1) Press the [MENU] (7) and then press the [Cursor] (38)
34 to select [Tape Library].
Panasonic VCR
Library Edit
Tape 1
Old title
: A2 AV2 ( 9:18)
New title
: FOOTBALL
6) If you are sure to delete the
programme, press the [OK] (24).
• If you want to delete all the
programmes, repeat above
procedures.
Panasonic VCR
Library for tape: 5
1/1
Title
Date
Really delete tape
from library ?
When no programme is left and the message appears,
press the [OK] (24).
• The cassette’s Tape Library data are now deleted from
the VCR’s Tape Library.
• If you want to keep the cassette number, press the
[EXIT] (27) instead of the [OK] (24).
7) Press the [EXIT] (27) to exit the On Screen Display.
Library for tape: 1
Title
1 ARD
FOOTBALL
A2 AV2
4 ¢¢¢04
Panasonic VCR
1/1
Date
( 9:07) Th 18.01.01
Hint:
• Even if you delete a cassette’s contents from the Tape Library
while that cassette is in the VCR, this does not erase the actual
programmes recorded on the cassette.
Th 18.01.01
( 9:23) We
7.02.01
( 0:01) Sa
6.01.01
Hints:
• The letters which can be used for entering (or changing) the title
are the following:
ABCDEFGHIJ
KLMNOPQRST
UVW XY Z ¢ s r
0123456789
• If the title needs a blank space, select the blank between [Z] and
[¢].
21
Intro-Jet Scan
Search Functions
VISS=VHS Index Search System
• Each programme recorded on the tape must be at least
5 minutes long.
Insert a recorded video cassette.
As soon as the cassette is inserted, the Cassette Number
Check starts. Wait a few moments until it is completed.
(See page 9.)
Press the [INDEX] (31) to start the index search. If you want
to search for the 2nd recorded programme in forward
direction, press the [INDEX] (31) L twice.
• The VCR fast-forwards or rewinds the tape and searches
for the specified index signal. When it has been found,
playback starts automatically.
To Cancel the Index Search or to Stop Playback
Press the [Stop] (9).
To Find space to record
This function lets you search the position to record of the
tape.
1) Insert a recorded video cassette.
If a cassette is already in the VCR, press the [LIBRARY/
SEARCH] (4).
• As soon as the cassette is inserted, the Cassette
Number Check starts. Wait a few moments until it is
completed. (See page 9.)
2) Press the [Cursor] (38) 34 to
select the [Find space to record]
indication and then press the
[LIBRARY/SEARCH] (4) to start
to search.
Content of tape: 30
Title
Panasonic VCR
1/1
Date
2 ZDF
(18:58) We 18.04.01
5 Find space to record 6
5 Intro-Jet Scan 6
Notes:
• Even after you have selected the [Find space to record] and the
VCR has located the tape position from which to make a new
recording we recommend you to confirm that this tape position is
really suitable, before you start recording.
• You cannot select the item [Find space to record] when there is
almost no space for recording on a videotape.
22
This VCR automatically records special index signals on the
tape every time a recording starts. The Intro-Jet Scan
function makes use of these index signals to play back the
beginning of each programme recorded on the cassette one
after another at high speed.
This lets you quickly and easily check the contents of a
cassette and find a desired programme.
• Each programme recorded on the tape must be at least
15 minutes long. (25 minutes in the EP mode)
1) Insert a recorded video cassette.
If a cassette is already in the
VCR, press the [LIBRARY/
SEARCH] (4).
• As soon as the cassette is
inserted, the Cassette Number
Check starts. Wait a few
moments until it is completed.
(See page 9.)
• If the [Intro-Jet Scan] indication
does not appear on the TV
screen, press the [LIBRARY/
SEARCH] (4) to make it
appear.
Content of tape: 30
Panasonic VCR
1/1
Title
Date
2 ZDF
(18:58) We 18.04.01
5 Find space to record 6
5 Intro-Jet Scan 6
Content of tape: --
Panasonic VCR
1/1
Title
Date
5 Intro-Jet Scan 6
2) Press the [Cursor] (38) 34 to select the [Intro-Jet Scan]
indication and then press the [LIBRARY/SEARCH] (4) to
start the Intro-Jet Scan.
• After rewinding the tape to the beginning, the VCR
plays it back at high speed for approximately
10 seconds. It then fast-forwards the tape to the next
tape position marked by an index signal (beginning of a
programme), and every time an index signal is found,
the VCR switches over to high-speed playback (Cue)
for about 10 seconds.
3) When you have found the programme that you want to
view, press the [Play] (26) to start normal playback.
To Cancel the Intro-Jet Scan or to Stop Playback
Press the [Stop] (9).
Editing
Album Function
The album function lets you collect desired scenes (both
moving and still pictures) and create the equivalent of a
photo album, but on video cassette.
(42)
EJECT
EJECT
3D DNR
3D DNR
EXT LINK
TBC
A.DUB
EXT LINK
INSERT
TBC
(44)
(43)
Digital still camera
A.DUB
INSERT
Hints:
• If you connect a digital still camera, use a camera equipped with
the video output socket. Use the cable supplied with the still
camera to connect it. For details, also read the operating
instructions of the equipment to be connected.
• If you leave the VCR in the recording pause mode for more than
5 minutes, the VCR automatically switches over to the stop mode
to protect the video heads. In this case, press the [STILL ALBUM]
(6) again to put the VCR in the recording pause mode again.
• If you want to add background music or narration to the scenes
recorded with the album function, perform Audio Dubbing as
explained on page 24.
• Depending on the output system of the digital still camera, the
pictures may not be recorded correctly.
• If you dub still pictures from a conventional analogue video movie
camera or VCR, some picture distortion may occur in the recorded
picture.
Video movie camera
• Connect a digital still camera, a video movie camera or
another external source to the Video Input socket/S-Video
Input socket and Audio Input sockets on the front panel of
this VCR.
1) Press the [STILL ALBUM] (6)
on the remote control to put the
VCR in the recording pause
mode.
• The VCR automatically selects the AV Input (external
input) [A3] and then switches over to the recording
pause mode. The figure for the preset recording time
(seconds) appears on the VCR display. The initial
setting is [05] (5 seconds).
REC
2) Press the [INDEX] (31) L or [INDEX] (31) K to
change the recording time. You can set any time
between [3] and [20] seconds.
3) Start playback on the source unit to search for the point
from which you want to copy onto this VCR.
4) When that point is reached,
press the [STILL ALBUM] (6)
on the remote control again to
start recording.
The VCR records the picture (and sound) for 5 seconds
and then automatically switches over to the recording
pause mode.
REC
5) When you have recorded all desired scenes, press the
[Stop] (9) to finish recording.
23
Audio Dubbing
The audio dubbing function lets you record new sound onto
the normal (mono) audio track. Although this erases the
original sound on the normal audio track, the sound on the
Hi-Fi audio tracks remains unchanged. Use this function to
add narration or background music to a previously made
recordings.
EJECT
3D DNR
EXT LINK
TBC
A.DUB
INSERT
(44)
Audio equipment or
Video movie camera
• Connect the audio equipment or a video movie camera to
this VCR with an audio cable.
• Press the [INPUT SELECT] (3) to select the AV Input
(external input) [A1], [A2] or [A3] according to the socket(s)
on the VCR to which you have connected the source unit.
A1: When connected to the AV1 21-pin Scart socket
A2: When connected to the AV2 21-pin Scart socket
• Make sure that [AV2] is set to [EXT]. (See page 29.)
A3: When connected to the Audio Input sockets on the
front panel of this VCR
• Use the L connector for operations in the normal
(monaural) mode.
1) Press the [Play] (26) on this VCR to start playback to
search for the point from which you want to start audio
dubbing.
2) At the point from which you want to perform audio
dubbing, press the [Pause/Still] (53) on this VCR to put it
in the still playback mode.
3) Press the [A.DUB] (49) on this VCR to put it in the
recording pause mode.
4) Start playback on the source unit so that you can hear
the sound.
5) When you reach the point from which you want to start
audio dubbing, press the [Pause/Still] (53) on this VCR
again to start recording the new sound or start your
narration.
6) At the point where you want to stop audio dubbing, press
the [Stop] (9) to finish recording.
24
Hints:
• The new sound is recorded on the normal audio track. The original
sound remains on the Hi-Fi audio tracks. The sound recorded on
the normal audio track is always in mono.
• For audio dubbing with narration, you can use the built-in
microphone of the connected video movie camera.
• To listen to the sound recorded with audio dubbing, press the
[AUDIO] (17) during playback to select the normal audio track.
(For details, refer to page 10.)
• To listen to the sound recorded with audio dubbing together with
the original sound, first set [Audio playback] to [MIX] (for details,
refer to page 30) and then press the [AUDIO] (17) during playback
to select the mixed sound.
Insert Editing
The Insert Editing function lets you substitute a part of a
previously made recording by inserting one or several new
scenes together with new sound. This editing method lets
you precisely set the end point, and the recording will stop
automatically when this point is reached. This editing method
also ensures smooth, noise-free picture transitions between
old and new recordings.
Hints:
• If you want to change the audio recording level, adjust it.
(See page 14.)
• Insert editing cannot be performed on blank sections of a tape.
In such case, perform assembly editing first.
• The cassette number is not recorded for the programme which has
been recorded with Insert Editing.
As the Insert Editing function is mostly used for replacing
relatively short parts of an already recorded programme, no
Tape Library data is registered for the newly inserted parts.
(42)
(43)
EJECT
3D DNR
EXT LINK
TBC
A.DUB
INSERT
(44) (56)
Video movie camera
(57)
Other VCR
• Connect a movie camera or another VCR to this VCR as
shown in the illustration.
• Press the [INPUT SELECT] (3) to select the AV Input
(external input) [A1], [A2] or [A3] according to the socket(s)
on the VCR to which you have connected the source unit.
A1: When connected to the AV1 21-pin Scart socket
A2: When connected to the AV2 21-pin Scart socket
• Make sure that [AV2] is set to [EXT]. (See page 29.)
A3: When connected to the Video Input socket/S-Video
Input socket and Audio Input sockets on the front
panel of this VCR
• Use the L connector for operations in the normal
(monaural) mode.
1) Press the [Pause/Still] (53) on this
VCR and then use the [Shuttle
Ring] (55) or [Jog Dial] (54) to
search for the tape position at
which you want the insert recording to end.
2) Press the [RESET] (19) to reset the tape counter
displayed on the VCR display to [0:00.00].
3) Use the [Shuttle Ring] (55) or [Jog Dial] (54) to search
for the tape position which you want the insert editing to
start.
4) Press the [INSERT] (48) to put this VCR in the recording
pause mode.
• The new sound will be recorded on the Hi-Fi sound
tracks.
• In case you also want to record the new sound on the
normal (mono) audio track, press the [A.DUB] (49).
The indication on the On Screen Display changes to
[AV INSERT].
5) Start playback on the source unit and search for the
beginning of the scene that you want to dub (copy) onto
this VCR.
6) When you have found that point, press the [Pause/Still]
(53) on this VCR again to start recording the new part
from the playback unit.
• When the tape counter displayed on the On Screen
Display becomes [0:00.00], recording automatically
stops, and this VCR stops in the recording pause mode.
7) Press the [Stop] (9) to finish editing.
25
One-Touch Editing
This editing function makes it very easy to perform repeated
assemble editing, insert editing or audio dubbing as the
connected source unit can also be controlled with this VCR’s
[Shuttle Ring] (55) and [Jog Dial] (54).
(42)
(61)
(43)
(62)
(56)
EJECT
3D DNR
EXT LINK
TBC
A.DUB
INSERT
(44)
Edit cable
(not supplied)
(57)
or
Video movie
camera
LANC type
edit cable
(not supplied)
Other VCR
• First confirm that both recording and source units are
connected to a AC mains socket.
• Press the [MENU] (7) and then use the [Cursor] (38) 34
to select [Other settings].
Press the [OK] (24) to display Other setting menu.
Press the [Cursor] (38) 3421 to select [Edit], and then
set it to [ON]. (See page 30.)
If the source unit also has an [Edit] setting (either a switch
or a menu setting), be sure to set it to [OFF] on the source
unit.
• Connect the EDIT socket (61) on this VCR to a video
movie camera or a VCR using the Edit cable (not supplied).
• If the source unit has the LANC type socket, connect the
8mm CONTROL socket (62) on this VCR to a video movie
camera or a VCR using the LANC type edit cable.
• Press the [INPUT SELECT] (3) to select the AV Input
(external input) [A1], [A2] or [A3] according to the socket(s)
on the VCR to which you have connected the source unit.
A1: When connected to the AV1 21-pin Scart socket
A2: When connected to the AV2 21-pin Scart socket
• Make sure that [AV2] is set to [EXT]. (See page 29.)
A3: When connected to the Video Input socket/S-Video
Input socket and Audio Input sockets on the front
panel of the this VCR
• Use the L connector for operations in the normal
(monaural) mode.
1) Press the [Pause/Still] (53) on this
VCR and then use the [Shuttle
Ring] (55) or [Jog Dial] (54) to
search for the tape position from
which you want to start recording.
2) Press the [REC] (28) to put it in the recording pause
mode.
• This automatically puts the source unit in the still
playback mode.
• Instead of the [REC] (28), press the [INSERT] (48) to
perform insert editing, or the [A.DUB] (49) for audio
dubbing, or the [INSERT] (48) and [A.DUB] (49)
simultaneously for AV insert editing.
3) Use the [Shuttle Ring] (55) or [Jog Dial] (54) on this
VCR to search for point in the picture from the source unit
from which you want to start recording.
4) Press the [Pause/Still] (53) on this VCR to start editing.
• Playback on the source unit starts automatically at the
same time.
26
5) When you reach the point in the picture from the source
unit where you want to finish recording, press the [Pause/
Still] (53) on this VCR again.
• This VCR is now in the recording pause mode and the
source unit in the still playback mode.
6) Press the [Stop] (9) to finish editing.
• After you have finished editing, disconnect the Edit
cable.
Hints:
• If you want to change the audio recording level, adjust it.
(See page 14.)
• If you connect the optional Editing Controller (VW-EC500E/
EC310E/EC300E) to the EDIT socket (61), such editing functions
as assemble editing, insert editing and audio dubbing can be
performed more quickly and efficiently between this VCR and
another VCR or a movie camera.
Manual Tuning
This VCR has 99 programme positions that can be preset to
receive TV stations.
If available TV stations are not received due to extraordinary
transmission circumstances, or if you want to change the
name of a TV station or change a TV station, you can set it
up manually.
1) Press the [MENU] (7) to display
the Main menu on the TV
screen.
2) Press the [Cursor] (38) 34 to
select [Tuning].
3) Press the [OK] (24) to display
the Tuning menu on the TV
screen.
Panasonic VCR
Main menu
Timer recording
5) Press the [OK] (24) to display
the list of tuned TV stations.
6) Press the [Cursor] (38) 34 to
select the TV station that you
want to tune manually.
Mono:
Tuning
Clock setting
Other settings
Panasonic VCR
Tuning
Manual
To select the type of sound to be recorded.
(For NV-HS930EC)
• Press the [Cursor] (38) 34 to select [OFF].
• Select [ON] if you want to record the normal (mono) sound
on the Hi-Fi audio tracks during a stereo, bilingual or
NICAM broadcast, or if the stereo sound is distorted due to
inferior reception conditions.
Download
Title page:
Shipping condition
Panasonic VCR
Tuning
Pos
1
2
3
4
5
6
7
8
Name
ARD
ZDF
N3
HR3
BR3
RB3
SFB3
SW3
Ch
1
2
19
26
18
3
36
29
7) Press the [OK] (24) to display
the Manual Tuning menu.
8) Press the [Cursor] (38) 3421
to select the desired field.
Video system: To change the type of video system.
• Press the [Cursor] (38) 34 to select [PAL] or
[MESECAM].
AUTO:
The VCR automatically distinguishes PAL,
SECAM/MESECAM system.
PAL:
For receiving PAL signals.
MESECAM: For receiving SECAM signals.
Tape Library
Auto-Setup Restart
4) Press the [Cursor] (38) 34 to
select [Manual].
Decoder:
To preset pay TV stations.
• Press the [Cursor] (38) 34 to select [ON].
If [Decoder] is set to [OFF], normal TV stations are preset.
Pos
Name
Channel
Fine tuning
Decoder
Video system
Mono
Title page
:
:
:
:
:
:
:
:
5
BR3
18
AUTO
OFF
PAL
OFF
301
Pos:
To change the order in which the TV
stations are assigned to the programme
positions.
• Press the [Numeric] (2) to enter the number of the desired
programme position.
Name:
To enter or change the name of a TV
station.
• Press the [Cursor] (38) 3421 and [OK] (24) to enter
the station name.
• If the station name needs a blank space, select the blank
between [Z] and [¢].
Channel:
To enter newly available TV stations or
change the channel number of an already
tuned TV station.
• Press the [Numeric] (2) to enter the channel number of the
desired TV station.
• Wait a few moments until the desired TV station has been
tuned.
To change the Title Teletext Page
(TV Guide page) Number.
• Press the [Numeric] (2) or [Cursor] (38) 34 to select the
correct Teletext page number.
9) Press the [OK] (24) to conclude the setting.
10) Press the [EXIT] (27) to exit the On Screen Display.
To Record the Title When Recording from an External
Equipment
Connect the external equipment to the VCR via 21-pin Scart
cable.
1) Press the [Cursor] (38) 34 to
select AV1 or AV2 on the Tuning
menu (Station list menu).
2) Press the [OK] (24) to display the
Manual Tuning menu.
Panasonic VCR
Tuning
Pos Name
97 – – – – –
98 – – – – –
99 – – – – –
AV1
AV2
Ch
–––
–––
–––
3) Press the [Cursor] (38) 34 to
select [AUTO]. This VCR records
the title when recording a
programme.
4) Press the [OK] (24) to conclude
the setting.
Title page
: AUTO
5) Press the [EXIT] (27) to exit the On Screen Display.
Note:
• Depending on the input signal condition, the titles may not be got
correctly.
Fine tuning:
To obtain the best tuning condition.
• Press the [Cursor] (38) 34 to obtain the best tuning
condition.
• If you do not want to change the tuning condition, press the
[Cursor] (38) 1 to return to the original condition [AUTO].
27
To Delete, Add or Move a Programme
Position
Setting the VCR’s Clock
1) Press the [MENU] (7) to display the Main menu on the
TV screen.
2) Press the [Cursor] (38) 34 to select [Tuning]. Press the
[OK] (24) to display the Tuning menu on the TV screen.
3) Press the [Cursor] (38) 34 to
select [Manual].
Press the [OK] (24) to display
the list of tuned TV stations.
4) Press the [Cursor] (38) 34 to
select the desired TV station.
Panasonic VCR
Tuning
Pos
1
2
3
4
5
6
7
8
Delete
Name
ARD
ZDF
N3
HR3
BR3
RB3
SFB3
SW3
Add
Ch
1
2
19
26
18
3
36
29
Move
5) Follow the operations below.
To delete a programme position [Delete]:
Press the [CH] (Red) (12) (J).
To insert a blank programme position [Add]:
Press the [DATE] (Green) (11) (r).
To move a TV station to another programme position
[Move]:
Press the [ON] (Yellow) (10) (r), and then use the
[Cursor] (38) 34 to select the new programme
position to which you want to assign the TV station.
6) Press the [OK] (24) to conclude the setting.
7) Press the [EXIT] (27) to exit the On Screen Display.
Note:
• If downloading of the setup data has been performed, only the
instruction indication [Delete] appears.
Hint:
• If you have performed Manual Tuning to enter TV stations, the
[ss] indication may appear under [Pos/Name] on the On Screen
Display when programming a SHOWVIEW timer recording.
To Restart the Auto Setup, Restart the
Download or Return the VCR to the
Shipping Condition
1) Press the [MENU] (7) to display the Main menu on the
TV screen.
2) Press the [Cursor] (38) 34 to select [Tuning]. Press the
[OK] (24) to display the Tuning menu on the TV screen.
3) Press the [Cursor] (38) 34 to
select [Auto-Setup Restart],
[Download] or [Shipping
condition].
Tuning
Panasonic VCR
Manual
Auto-Setup Restart
Download
Shipping condition
4) Press the [OK] (24) to prepare
for Auto Setup start, Download
start or resetting the VCR to the shipping condition.
5) Press the [OK] (24) again to actually start the Auto
Setup, start the Download or change the settings back to
the shipping condition.
• After returning the VCR to the shipping condition,
disconnect and reconnect the AC mains lead to re-tune
the VCR.
28
To Manually Adjust the Clock
1) Press the [MENU] (7) to display the Main menu on the
TV screen.
2) Press the [Cursor] (38) 34 to
select [Clock setting]. Press the
[OK] (24) to display the Clock
setting menu on the TV screen.
Panasonic VCR
Clock setting
Clock setting
Time
Date
: MAN.
: 20:30:24
: 16.10.05
3) Confirm that [Clock setting] is set
to [MAN.], and then press the
[OK] (24).
4) Use the [Cursor] (38) 3421 to set the date and time.
• Instead of the [Cursor] (38) 3421, you can also use
the [Numeric] (2) to set the date and time.
5) Press the [OK] (24) to conclude the setting.
6) Press the [EXIT] (27) to exit the On Screen Display.
To Activate the Automatic Time
Correction Function
If a TV station transmits a signal for time setting, performing
the operation steps below activates the Automatic time
correction function and the time is corrected automatically.
1) Press the [MENU] (7) to display the Main menu on the
TV screen.
2) Press the [Cursor] (38) 34 to
select [Clock setting]. Press the
[OK] (24) to display the Clock
setting menu on the TV screen.
Panasonic VCR
Clock setting
Clock setting
Time
Date
: AUTO
: 20:30:24
: 16.10.05
3) Press the [Cursor] (38) 34 to
set [Clock setting] to [AUTO].
4) Press the [OK] (24) to conclude
the setting.
• Under adverse reception conditions, etc., the Automatic
time correction function may not work. In this case, the
indication for [Clock setting] is automatically reset to
[MAN.].
If the reception conditions improve later on, it may be
possible to activate this function.
5) Press the [EXIT] (27) to exit the On Screen Display.
Hints:
• If [Clock setting] is set to [AUTO] when you open the Clock screen,
do not set it to [MAN.], otherwise, the automatic time correcting
function is deactivated.
• The built-in clock employs the 24-hour system.
• In case of a power failure, an automatic back-up system
automatically maintains the operation of the clock for approximate
60 minutes.
• When [Clock setting] is set to [AUTO], the automatic time
correction function checks and if necessary adjusts the time
several times every day. The automatic time correction function
only works when the VCR is switched off; it does not work in the
timer recording standby mode.
• If [Clock setting] is set to [MAN.] and [Power save] to [ON] (see
page 29), the time may not be maintained correctly. In this case,
manually adjust the clock.
• If [Clock setting] is set to [AUTO] and [Power save] to [ON], the
Automatic time correction function does not work while the VCR is
turned off. However, as soon as it is turned on, the Automatic time
correction function is activated and the clock is set correctly.
VCR display:
Various Settings
1) Press the [MENU] (7) to display
the Main menu on the TV screen.
2) Press the [Cursor] (38) 34 to
select [Other settings]. Press the
[OK] (24) to display Other
settings menu.
3) Press the [Cursor] (38) 3421
to select the desired field then
desired position.
Other settings
Tape length
OSD
Power save
VCR display
AV2
AV2 IN
S-VHS
S-VHS ET
Other settings
TV system
Picture
Audio playback
Edit
Remote
Language
Country
:
:
:
:
:
:
:
:
Panasonic VCR
1/2
AUTO (2 E-240)
4:3
OFF
DIMMED
DECODER
VIDEO
ON
OFF
:
:
:
:
:
:
:
Panasonic VCR
2/2
AUTO
AUTO
NORMAL
OFF
VCR 1
English
others
Tape length:
To set the Tape length of the cassette being
used to ensure correct indication of the
remaining tape time.
• Set Tape length as follows:
[AUTO (2 E-240)]:The VCR automatically distinguishes E30, -60,
-90, -120, -180 and -240 tapes.
[E-195]:
For E195 tape
[E-260]:
For E260 tape
[E-300]:
For E300 tape
• Even if you have selected the correct tape length, the remaining
tape time may not be indicated correctly with certain kinds of
cassettes.
For automatic display on the TV screen of
the TV station information, type of sound
system of the programme being watched
and the sound playback mode.
(See page 31.)
• Set OSD mode as follows:
For automatic change of the brightness of
the VCR display when the VCR is switched
off.
• Set the brightness of the VCR display as follows:
[ON]:
[OFF]:
[DIMMED]:
AV2:
To select the type of external source
equipment which is connected to the VCR’s
AV2 21-pin socket.
• Set the external source equipment as follows:
[DECODER]:
[EXT LINK 1]:
[EXT LINK 2]:
[EXT]:
Indications can be displayed on the TV screen.
Indications can be displayed on the TV screen
when using wide type of TV screen and selecting
the wide screen mode on the TV setting.
• Even if setting to [16:9], indications may be cut off depending on
the TV.
[OFF]:
No indications appears.
Power save:
To reduce the VCR’s power consumption
when the VCR is switched off.
• Set Power save mode as follows:
[ON]:
[OFF]:
The power consumption is greatly reduced when
the VCR is turned off.
The power consumption is not reduced when the
VCR is turned off.
Refer to the followings when [Power save] is set to [ON].
• [VCR display] is automatically set to [OFF].
• To turn the VCR on, keep the [VCR-ON/OFF] (1) pressed on the
VCR main unit. It is not possible to turn it on with the remote
control.
• The Power save function does not work in the timer recording
standby mode. After all programmed timer recordings have been
made, and after all programmed data have been erased, the VCR
switches over to the Power save mode.
• When the VCR is off, Pay TV programmes cannot be watched on
the TV because the signal from the connected decoder is not
looped through. To watch them, turn on the VCR.
When a decoder is connected. When this setting,
it is not possible to change [AV2 IN] setting.
When a digital receiver which transmits a special
control signal recordings via the 21-pin Scart
cable, for example the F.U.N. receiver
(TU-DSF30/S3) is connected for the linked timer
recordings. (See page 15.)
When an external equipment with a timer function
is connected for the linked timer recordings.
(See page 15.)
When another VCR or a satellite receiver is
connected.
AV2 IN:
To record a S-video signal from external
source equipment which is connected to the
VCR’s AV2 21-pin socket.
• Set a signal from external source equipment as follows:
[VIDEO]:
[S-VIDEO]:
OSD:
[4:3]:
[16:9]:
Indications are brightly lit.
Indications are not lit.
Indications are dimly lit.
Normally set to this position.
Set this position if the external device is equipped
with a fully-wired 21-pin Scart socket and features
Y/C signal separation. This setting makes the
picture quality be high.
S-VHS:
To make an S-VHS recording on a S-VHS
cassette. (See page 13.)
• Set the S-VHS switch as follows:
[ON]:
[OFF]:
To record in S-VHS format on S-VHS cassette.
To record in VHS format on S-VHS cassette.
S-VHS ET:
To record a VHS cassette with S-VHS
Quality. This format is only possible in the
SP mode. (See page 13.)
• Set the S-VHS ET switch as follows:
[ON]:
[OFF]:
To record in S-VHS ET format on VHS cassette.
To record in VHS format on VHS cassette.
TV system:
To select the type of colour TV system to be
used during playback or during recording
from an external source.
• Set the colour TV system as follows:
[AUTO]:
[PAL]:
[MESECAM]:
The VCR automatically distinguishes PAL,
SECAM/MESECAM system. If the picture lacks
colour, set to [PAL] or [MESECAM].
When PAL system is used.
When SECAM system is used.
Picture:
To set the playback picture sharpness
(sharper or softer).
• Adjust the picture sharpness as follows:
[AUTO]:
[SHARP]:
[SOFT]:
To select automatic sharpness adjustment of the
playback picture.
To make the playback picture sharper.
To make the playback picture softer.
29
Audio playback: To set the Audio mode to be used during
playback.
• Set Audio mode as follows:
[NORMAL]:
[MIX]:
Normally set to this position.
Use this setting when playing back a cassette
tape on which audio dubbing or AV insert has
been performed. The Hi-Fi sound track with the
original sound and the normal sound track (mono)
with the audio-dubbed sound are played back
together.
Edit:
To set for one-touch editing or other editing
modes.
• Select the desired Edit mode as follows:
[ON]:
[OFF]:
For One-Touch Editing. (Only when this VCR is
used as recording unit.)
For editing with an editing controller or for
synchronized editing.
Remote:
To set the Remote control mode.
• Set the Remote control mode as follows:
[VCR 1]:
Select this setting on both the VCR and the
remote control for normal use with one VCR.
[VCR 2]:
Select this setting on both the VCR and the
remote control when using this VCR and another
Panasonic VCR in the same place. This ensures
that you can operate both VCRs independently
with their respective remote control. It also allows
you to operate both VCRs with a single remote
control, simply by changing the remote control
mode on the remote control.
• To change the remote control mode on the remote control itself,
change the position of the [VCR 1/2] (16) to match the setting. If
these settings are not matched, the remote control cannot be used
to operate the VCR.
4) Press the [OK] (24) to conclude the setting.
(Press it twice on the Remote control setting.)
5) Press the [EXIT] (27) to exit the On Screen Display.
Language or Country Setting
1) Press the [MENU] (7) to display
the Main menu on the TV screen.
2) Press the [Cursor] (38) 34 to
select [Other settings]. Press the
[OK] (24) to display Other
settings menu.
Other settings
TV system
Picture
Audio playback
Edit
Remote
Language
Country
Panasonic VCR
2/2
:
:
:
:
:
:
:
AUTO
AUTO
NORMAL
OFF
VCR 1
English
others
3) Press the [Cursor] (38) 3421 to select [Language] or
[Country] and the entry field for [Language] or [Country]
in this order.
4) Press the [Cursor] (38) 34 to select the desired
language or country.
5) Press the [OK] (24) to conclude the setting.
6) Press the [EXIT] (27) to exit the On Screen Display.
30
Other Function
Indications that Can Be Displayed on the
TV Screen
At a press of the [OSD/DISPLAY]
(18), the following indications
appear on the TV screen.
1)
TV station name
2)
STEREO or BILINGUAL
Indicator
(For NV-HS930EG)
When receiving a TV
programme, the type of sound
system in which it is broadcast is
automatically indicated.
1
ARD
2
3
SP
STEREO
To Play Back NTSC Video Cassettes on
Your PAL TV
(Quasi-NTSC Playback Function)
This VCR allows playback of tapes recorded in the NTSC
system on a normal PAL system TV with the same
operations as usual.
On some TVs, however, the playback picture may roll up or
down.
• If your TV has a V-HOLD control or equivalent adjustment
function, use it to try to stop the picture movement.
Crystal View Control Super (CVC Super)
0:00:29
4
5
STEREO, M1 and M2 Indicator
(For NV-HS930EC)
When receiving a TV programme with the Stereo,
Bilingual or NICAM sound system, the type of sound
system in which it is broadcast is automatically
indicated.
STEREO: When receiving a Stereo/NICAM stereo
broadcast.
M1/M2:
When receiving a Bilingual/NICAM dualsound broadcast.
M1:
When receiving a NICAM monaural
broadcast.
The crystal view control function ensures that you always
obtain the optimum picture quality so that you get the best
picture automatically.
While the VCR is turned on, the [CVC] indication is always
displayed to show that the Crystal View Control Super is
activated.
Child Lock Function buttons
([OK] (24) and [OFF (i)] (22))
This function deactivates all buttons on the VCR and the
remote control. Use this function, when you do not want
other people to operate the VCR.
To Activate the Child Lock Function
Hold down the [OK] (24) and the [OFF (i)] (22)
simultaneously until the [!" hold] indication appears in the
VCR display.
4)
Tape running display
• If you press a button while the Child Lock function is on, the
[!" hold] indication appears in the VCR display to inform you that
no operation is possible.
5)
Present time/Tape counter/Remaining tape time/
Index Search/One-Touch Recording (OTR)/
Playback Off Timer Function
To Cancel the Child Lock Function
Hold down the [OK] (24) and the [OFF (i)] (22)
simultaneously until the [!" hold] indication disappears.
3)
Tape speed indicator
Present time
17:24:31
Tape counter
– 2:35.47
Remaining tape time
REMAIN: 2:34
Index Search
5 02
One-Touch Recording (OTR)
OTR 60
Playback Off Timer Function
30
Notes:
• If [OSD] is set to [OFF], none of the above indications appear.
• None of the above indications appear during special playback.
• During playback and when the AV input for the external source is
selected, indications 1 and 2 do not appear.
• If you disconnect the power cable, the Child Lock function is
automatically cancelled after the power backup time of
approximately 60 minutes has elapsed.
• If you cannot cancel the Child Lock function, press the [EXIT] (27)
and perform the operation.
NICAM Broadcasting System
(For NV-HS930EC)
NV-HS930EC feature the NICAM digital sound system, a
2-channel sound broadcast system that provides either
2 high-quality stereo sound tracks or 2 independent mono
sound tracks, M1 and M2.
NICAM programmes are always accompanied by standard
(mono) sound broadcasts, and during playback, you can
select the desired sound with the [AUDIO] (17).
• The NICAM stereo sound can only be recorded on the Hi-Fi
audio tracks.
• If, for some reason, you want to record a stereo, bilingual or
NICAM TV programme intentionally in mono on the Hi-Fi
audio tracks, set [Mono] to [ON] for the programme position
on which the desired programme is broadcast, as
described on page 27.
31
Convenient Automatic Functions
VCR Auto Power On
When you insert a video cassette, the VCR switches on
automatically.
Auto Playback Start
When you insert a video cassette with a broken erasure
prevention tab, playback start automatically without having to
press the [Play] (26).
VCR-off Playback
When the VCR is off, an inserted cassette can be played
back by pressing the [Play] (26).
Auto Rewind
When the tape reaches the end, the VCR automatically
rewinds it to the beginning.
• This function does not work during timer recording and
OTR.
Automatic Switching Off and Ejection
When the VCR is switched off, and inserted cassette can be
ejected simply by pressing the [EJECT] (39).
The VCR will eject the cassette and automatically turn itself
off again.
Adjusting the Playback Picture
Under normal conditions, the VCR automatically adjusts the
playback picture for optimum quality. However, in some
cases it may be necessary to adjust it manually.
If noise bars appear during normal playback, slow playback
or still playback, follow the operations below.
During normal or slow playback,
press the [TRACKING/V-LOCK]
(33) I (s) or J (r) until the bars
noise disappear.
• If the noise bars appear during still
playback, switch the VCR over to
the slow playback mode and then
adjust the tracking as explained
above.
TV screen
Playback picture
containing noise bars
Press the [TRACKING/V-LOCK] (33) I (s) and J (r)
simultaneously to return to Auto Tracking.
If the still picture scrolls up or down, perform the following
operation.
During still playback, keep the [TRACKING/V-LOCK] (33)
I (s) or J (r) pressed until the picture stops scrolling.
Precautions:
• With certain TV models and tapes, it may not be possible to adjust
the tracking.
• If you play back a cassette that was recorded on another unit of
VCR, the picture quality may be inferior in the normal playback,
slow playback, and still playback, and it may need to manual adjust
the tracking by above method. Also, on some TVs, the picture may
scroll up and down in the special playback functions.
However, these are not malfunctions.
32
Before Requesting Service
On Screen Display Messages
The error messages are given in brackets [
].
[Please insert video tape!]
• You pressed the [REC] (28), [REC/OTR] (52), the
[DIRECT TV REC] (36), the [Play] (26), the [Fast Forward]
(25), the [Rewind] (8) or the [LIBRARY/SEARCH] (4)
when no cassette was inserted in the VCR.
You pressed the [TIMER] (20) when no cassette was
inserted in the VCR with a timer recording programmed.
Insert a video cassette.
[Please use tape with unbroken recording tab !]
• You pressed the [REC] (28), [REC/OTR] (52) or the
[DIRECT TV REC] (36) when a cassette with a broken out
erasure prevention tab was inserted in the VCR.
You pressed the [TIMER] (20) when a cassette with a
broken out erasure prevention tab was inserted in the VCR
with a timer recording programmed.
Insert a video cassette with an intact erasure prevention tab
on which recording is possible.
[This action is not possible before time and date are set]
• You pressed the [ShowView] (30) or the [PROG./CHECK]
(14), even though the time and date have not yet been set
on the VCR.
Set the time and date.
[No timer programmes to be done!]
• You pressed the [TIMER] (20) even though no timer
recording has been programmed.
Programme a timer recording before pressing the [TIMER]
(20).
[Please put VCR into stop mode first]
• You attempted to change the contents of the timer
programming while a timer recording was being performed.
Put the VCR into the stop mode first.
Other messages may also appear.
Follow the instructions given on the TV screen.
The VCR Does Not Work Correctly
[The VCR display is not illuminated.]
• The AC mains lead is disconnected.
Connect the AC mains lead securely.
• VCR display setting is [OFF]. Set [VCR display] to [ON] or
[DIMMED]. (See page 29.)
• Power save setting is [ON]. (See page 29.)
[The VCR display is illuminated, but the VCR cannot be
operated.]
• The VCR is in the timer recording standby mode.
Press the [TIMER] (20) to cancel the standby mode.
• Safety devices are operating.
Disconnect the AC mains lead and wait approximately
1 minute before reconnecting.
Then check if the VCR can be operated.
[The VCR picture does not appear on the TV screen.]
• The RF output channel is set to [ss].
Change the RF output channel to a channel other than
[ss]. (See page 7.)
[Auto clock setting does not work correctly.]
• Teletext information is not available or cannot be read.
Set the clock manually.
[Download cannot be performed.]
• The VCR is not connected to a TV equipped with the Q Link
(or a similar) function via a fully-wired 21-pin Scart cable.
Be sure to use a fully wired 21-pin Scart cable to connect
the VCR to a TV with the Q Link (or a similar) function.
Playback Does Not Work Properly
[The playback picture is distorted or in black and white.
Or, horizontal noise bars appear in the picture or horizontal
lines move up and down.]
• The tracking adjustment is not correct.
Adjust the tracking. (See page 32.)
• The TV’s video playback channel has not been tuned
correctly.
Re-tune the video playback channel.
• The video heads are clogged or worn.
Consult your dealer for advice.
• The playback picture is distorted when using an E300 type
video cassette that was recorded in the LP or EP mode.
We recommend that you use video cassettes other than
type E300.
• The playback picture is distorted when you record the tape
in the EP mode using MESECAM system.
However, this is not a malfunction.
We recommend PAL system for recording in the EP mode.
• During high speed cue and review playback
(JET SEARCH), the tape transport noise will increase.
However, this is not a malfunction.
Recording Is Not Possible or Does Not Work Properly
[When recording is attempted, the 1 indication flashes.]
• A video cassette with a broken out erasure prevention tab
is used. Use a cassette with an intact tab, or if you want to
erase the previously recorded contents on the cassette,
cover the tab hole with two layers of adhesive tape.
[The playback picture of a recorded programme is distorted
or no picture can be seen.]
• The aerial or aerial lead connection is defective.
Check the connections. If the picture displayed on the TV is
also distorted, there is something wrong with the installation
of the aerial.
• No programme was recorded because the VCR is not
tuned correctly.
Tune it correctly.
• No programme was recorded because the AV input was
selected on the VCR.
Select the programme position of the desired TV
programme.
[Timer recording does not work correctly.]
• Time and date are not set or they are set incorrectly.
Set the time and date correctly.
• The starting time or ending time of the timer recording were
not programmed correctly.
Set the starting time or ending time correctly.
• The VCR was not put in the timer recording standby mode.
After programming a timer recording, press the [TIMER]
(20) to put the VCR in the timer recording standby mode.
[Recording from an external source connected to the VCR’s
AV input cannot be made.]
• The correct AV input is not selected.
Select the correct AV input.
• The connections from the external source are not made
correctly. Correct them. (See page 13.)
The Remote Control Does Not Work Correctly
[The remote control does not work correctly.]
• The remote control signal cannot reach the VCR.
Aim the remote control at the VCR and make sure that the
infrared beam’s path is not obstructed.
• The distance to the VCR is too long.
Use the remote control within 7 metres from the VCR. If you
are using it within this range but the remote control still
cannot operate the VCR, replace the batteries.
• The batteries are exhausted.
Replace with new batteries.
• The batteries have been inserted with reversed polarities
(+ and -).
Insert the batteries correctly. (See page 2.)
• Power save setting is [ON]. (See page 29.)
• The wrong remote control mode has been selected.
Set the correct control mode. (See page 30.)
33
The Tape Library System Does Not Work Correctly
[The Cassette Number Check has failed.]
• The Cassette Number Check was cancelled midway.
Try to perform the Cassette Number Check again.
(See page 20.)
• The inserted cassette is new (unrecorded).
The inserted cassette was recorded on another VCR and
does not have a cassette number.
The inserted cassette was recorded on a model NV-HS930
VCR other than this unit.
The cassette number of the inserted cassette has been
deleted from the Tape Library data.
The Library memory may be full.
# The Cassette Number Check is designed to fail
whenever one of the above conditions applies; this is
not a malfunction.
[The recorded programme has not been registered in the
Tape Library data.]
• The length of the recorded programme is less than
15 minutes in the SP or LP mode.
• The length of the recorded programme is less than
25 minutes in the EP mode.
Record for more than 25 minutes in the EP mode.
• No Tape Library data is registered when insert editing is
performed in a previously recorded programme.
This is not a malfunction.
34
Index
∫A
∫J
Audio ................................................... 30
Audio dubbing ..................................... 24
Auto Setup ...................................... 7, 28
AV input ................................................. 4
AV link ................................................. 15
∫B
Battery ................................................... 2
∫C
Child lock ............................................. 31
Clock ................................................... 28
Condensation ........................................ 2
Country setting ........................ 5, 6, 7, 30
Cue ...................................................... 10
CVC Super .......................................... 31
∫D
Decoder ................................... 15, 27, 29
Digital receiver .................................... 14
Direct TV recording ............................. 12
Download .................................... 5, 6, 28
∫E
EP ........................................... 10, 12, 16
Erasure protection ............................... 12
EXT LINK ...................................... 15, 29
∫F
Fast forward ........................................ 10
Fine tuning .......................................... 27
∫H
Hi-Fi ............................. 13, 24, 27, 30, 31
∫I
Insert Editing ....................................... 25
Intelligent timer .................................... 18
Intro-jet scan ....................................... 22
JET SEARCH ...................................... 10
∫L
Language setting ................................. 30
LP ...................................... 10, 12, 16, 17
∫M
Manual tuning ...................................... 27
Menu ..................................................... 4
MESECAM .................................... 27, 29
Mono ................................................... 27
∫N
NICAM ................................................. 31
NTSC playback ................................... 31
∫O
One-Touch Editing .............................. 26
OSD ............................................... 29, 31
OTR ..................................................... 12
∫P
PAL ................................................ 27, 29
Playback .............................................. 10
Playback off timer ................................ 11
Pos ................................................ 17, 27
Power save .......................................... 29
∫Q
Q Link .................................................... 5
∫R
Recording ............................................ 12
Remaining tape time ........................... 12
Remote control mode .......................... 30
Repeat Playback ................................. 10
Replay ................................................. 10
Reset ..................................................... 3
Review ................................................. 10
Rewind .................................................10
RF ......................................................5, 7
∫S
Satellite receiver ..................................14
Scart cable .........................................5, 6
Shipping condition ...............................28
SHOWVIEW ............................................16
Slow playback ...................................... 10
SP ............................................12, 16, 17
Stereo ..................................................31
Still album ............................................23
Still playback ........................................ 10
Stop .....................................................10
S-VHS ............................................13, 29
S-VHS ET ......................................13, 29
∫T
Tape length .................................... 12, 29
Tape Library System ...........................19
Tape speed ........................12, 16, 17, 31
Teletext ..................................................4
Timer Recording ............................16, 17
Tracking ...............................................32
TV aspect ..............................................4
TV system ............................................29
∫V
VCR display .........................................29
Video system .......................................27
VISS ....................................................22
Volume ..................................................4
VPS/PDC .............................................17
35
Specifications
Power Source:
Power Consumption:
Power Consumption When in Standby Mode:
Video Recording System:
Video Heads:
Audio Heads:
Tape Speed:
Tape Format:
Record/Playback Time:
FF/REW Time:
VIDEO
Television System:
Modulation System:
Input Level:
Output Level:
AUDIO
Input Level:
Output Level:
Video Horizontal Resolution:
Signal-to-Noise Ratio:
Dynamic Range:
Audio Frequency Response:
Operating Temperature:
Operating Humidity:
Weight:
Dimensions:
220–240 V AC 50/60 Hz
22 W
Approx. 3 W (When Power save function is activated)
2 rotary heads, helical scanning system
4 heads
2 heads (Hi-Fi)
SP; 23.39 mm/s
S-VHS/VHS tape
SP; 240 min with NV-E240
LP; 480 min with NV-E240
Approx. 60 s with NV-E180
LP; 11.7 mm/s
SP; 240 min with NV-SE240
LP; 480 min with NV-SE240
CCIR; 625 lines, 50 fields, PAL colour signal
Luminance; FM azimuth recording
Colour signal; converted subcarrier phase shift recording
AV1/AV2/AV3;
1.0 Vp-p,
AV1/AV2;
1.0 Vp-p,
VIDEO OUT (PHONO);
1.0 Vp-p,
S-VIDEO OUT (PHONO);
1.0 Vp-p,
RF Modulated;
UHF channel (21–69),
AV1/AV2/AV3;
AV1/AV2;
AUDIO OUT (PHONO);
j6 dBV,
j6 dBV,
j6 dBV,
Colour; more than 240 lines (SP)
Colour; more than 400 lines (S-VHS/S-VHS ET) (SP)
Video; more than 45 dB (S-VHS/SP)
Audio; more than 65 dB (Hi-Fi)
Audio; more than 90 dB (Hi-Fi audio track)
20 Hz–20 kHz/Hi-Fi
5oC–40oC
35%–80%
3.5 kg
430 (W)a87 (H)a289 (D) mm
Weight and dimensions shown are approximate. Specifications are subject to change without notice.
36
75 ohm, terminated
75 ohm, terminated
75 ohm, terminated
75 ohm, terminated
75 ohm
more than 10 kohm
less than 1 kohm
less than 1 kohm
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement