Panasonic NVHV60 Operating Instructions

Panasonic NVHV60 Operating Instructions
Quick Start Guide
Video Cassette Recorder
Model No.
NV-HV60EB/EBL
(Model suffix: 'EB' for UK model, 'EBL' for Ireland model)
Dear Customer,
May we take this opportunity to thank you for purchasing this
Panasonic Video Cassette Recorder. Please use this Quick
Start Guide to help you set up your VCR. We would also
advise you to carefully study the operating instructions and
note the listed precautions before use.
Condensation Precaution
This VCR is not fitted with a condensation sensor. If you bring
in the VCR from a cold place, e.g. a car, into a warm house,
dew may form inside the VCR.
Do not switch it on for at least 1 hour.
Check List
Fit the Batteries into
the Remote Control
Check that you have the accessories and items shown
Remote Control
N2QAKB000044
RF cable
K2KF2BA00001, VJA0728-A
or K1TWACC00001
AC Mains lead
RJA0044-3C
Batteries for the
Remote Control
R6 size
Quick Start Guide
RQCAD0006 (This leaflet)
Operating Instructions
RQTD0078-B
Guarantee Card
(for UK and Republic of Ireland customers only)
www.panasonic.co.uk
• Order accessory and consumable items for your product with ease and confidence by phoning our Customer Care Centre
Mon–Friday 9:00am–5:30pm. (Excluding public holidays.)
• Or go on line through our Internet Accessory ordering application.
• Most major credit and debit cards accepted
• All enquiries transactions and distribution facilities are provided directly by Panasonic UK Ltd.
• It couldn’t be simpler!
Customer Care Centre
For UK customers: 08705 357357
For Republic of Ireland customers: 01 289 8333
How to use this Guide
(1) Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 2–3
(2) Auto Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 4–5
RQCAD0006
F10B03-0
-1-
Connections (without Scart cable)
You can connect your VCR to a TV and Satellite Receiver using RF cable.
However, using this connection method it may be difficult to obtain a clear picture from the Satellite Receiver.
For this reason it is not recommended for inexperienced users.
(See preferred connection on page 3.)
Aerial Input socket
Satellite Receiver
1Aerial
Aerial Output socket
To AC Mains socket
4
RF Input socket
VCR
2 RF cable
TV
Aerial Input
socket
AC Input socket
RF Output socket
AC Mains lead
(supplied)
4
RF cable (supplied)
Must be connected to
watch TV channels.
3
To AC Mains socket
1
2
Connect the aerial to the aerial input socket of the Satellite
Receiver.
- If you do not have a Satellite Receiver, connect the
aerial to the RF input socket of the VCR and go to step 3.
DEO
IN/
ENT
RF/
ANT
Connect the aerial from the Satellite Receiver to the RF input
socket.
Satellite Receiver
Satellite Receiver
VCR
OUT/
SORTIE
3
IN/
ENT
Connect the Aerial Output socket to the TV aerial socket.
VCR
RF/
ANT
OUT/
SORTIE
4
Plug the TV, VCR and Satellite Receiver into the mains
as shown at the top of the page.
Notes:
4
Switch ON your Satellite Receiver; to ensure reliable tuning select either SKY ONE or SKY NEWS.
If, after Auto Setup is complete, the programme position of the satellite receiver is not to your
preference, or 'SAT' name is not shown in the Programme List, you can re-arrange the
programme position and enter 'SAT' name manually. See page 34-36 of Operating Instruction.
-2-
TV
Connections (with Scart cables)
Follow the step-by-step guide below.
RF Input socket
RF Output socket
AV1 21-pin Scart socket
AV2 21-pin Scart socket
1 Aerial
VCR
TV
2
AC Input socket
Aerial Input
socket
RF cable
(supplied)
3
Necessary for TV
6 AC Mains lead
(supplied)
AV2 socket
AV1 socket
4
6
Satellite Receiver
6
To AC Mains socket
21-pin Scart socket (TV)
1
21-pin Scart socket
(VCR)
To AC Mains socket
Necessary for connecting
a Satellite Receiver
5
Optional Connection
DEO
IN/
ENT
Connect the aerial to the RF input socket of the VCR.
VCR
RF/
ANT
OUT/
SORTIE
2
IN/
ENT
RF/
ANT
Connect the RF cable from the RF output socket of the VCR to
the TV aerial input socket.
TV
VCR
OUT/
SORTIE
3
4
AV1 (TV)
AV2 (DECODER/DECODEUR/EXT)
Connect the AV1 21-pin scart socket to the TV scart socket .
If your TV does not have a scart socket or you do not have a
scart cable, skip this step.
Connect the AV2 21-pin scart socket to the VCR scart socket
on your Satellite Receiver/Digital Receiver. If you are not
connecting a Satellite Receiver, skip this step.
5
Connect the TV scart socket of your Satellite Receiver to the
AV1 scart socket of your TV. If you are not connecting a
Satellite Receiver, skip this step.
6
Plug the TV, VCR and Satellite Receiver into the mains
as shown at the top of the page.
-3-
TV
VCR
VCR
Satellite Receiver
Satellite Receiver
TV
Auto Setup
VCR Display
1
START
Set the VCR/TV switch to VCR. Turn on the TV, then
press the Standby/ON button to switch on the VCR.
The VCR will now start Auto Setup.
VCR
TV
! The first digit of the VCR display will begin to flash.
After a while, it will stop flashing and the RF output
channel number will be displayed.
! If you have connected the VCR to the TV with a Scart
cable, you will see the screen on the right during Auto
Setup. You can skip step 2 below.
On-Screen Display
Auto-Setup
Tuning
: Ch 21
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Auto-Setup
2
EXT LINK TV ASPECT
Select an unused channel pre-set on your TV and tune
it to the RF output channel number shown on the VCR
display (or until you can clearly see the Auto Setup
screen shown on the right). Store the new video
playback channel (refer to the instructions for your TV).
! If you can see interference on the picture, you may
need to change the RF output channel. Follow the
instructions on page 6 to do this.
TV/TEXT
TRACKING/V-LOCK
1
CH
VOLUME
4
INPUT SELECT
VIDEO Plus+
INDEX
PROG PLAY AUDIO
REC
3,10
5,8
6,7
5
ENTER
4
4,7
1
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - EXIT
3
Press the EXIT button. The Owner ID screen will appear.
You can complete the Owner ID now or skip this step
and do it later. To do it later, press the EXIT button
again. Your VCR is now ready to use.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
4
CH
PROG./CHECK
I-TIMER
PDC
VCR Ch : 24
SP/LP/EP
1
2
3
4
5
6
8
9
TIMER
OFF TIMER OSD/DISPLAY RESET/CANCEL
7
0
To set the Owner ID now, press the Numeric
buttons or Cursor buttons (
) to enter a four-digit
PIN number.
If you make a mistake, press the Cursor button ( ),
then enter the correct digit. Make sure that you will
remember the PIN number (make a note of it).
Owner ID
PIN number
Name
House No
Postcode
: 846*
: **************
: ***********
: ***********
You now have the opportunity
to enter your details and
help the police crack crime
see instruction book.
:select
: exit
ENTER
: store
EXIT
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
5
Press the ENTER button and the Cursor button ( ).
The cursor moves to [Name].
ENTER
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
6
Press the Cursor button ( ).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Press the Cursor buttons (
) to select a letter and
then press the Cursor button ( ) to move to the next
letter.
Repeat these steps until you have entered your name.
7
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
8
Press the ENTER button to finish setting your name.
ENTER
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
9
Enter the [House No] and [Postcode] in the same way.
BBC1
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
10
FINISH
Note:
!
!
EXIT
!
EXIT
When you are happy with the information you have
entered, press the EXIT button to leave the Owner ID
screen. You will now see the TV picture.
Your VCR is now ready to use.
If Auto Setup has previously been completed, this indication will not appear. In this case you can run
Auto Setup again. See page 37 of Operating Instructions.
In some cases, where the VCR has been connected to your TV using the RF cable only (no Scart)
the RF output channel may interfere with the TV stations transmitted in your area. This may prevent
you from seeing the On-Screen Display clearly. Please refer to page 6 for removing the interference
before restarting Auto Setup (page 37of Operating Instructions).
If you want to cancel Auto Setup before it has finished, press the EXIT button. You can restart Auto
Setup later, see page 37 of Operating Instructions.
-4-
Auto Setup
If the clock setting menu appears after Auto Setup has finished (Auto clock set was not possible due to a weak signal)
PROG PLAY AUDIO
On-Screen Display
REC
2
Datumset
Clock
/ Zeit
1
ENTER
1
ENTER
2
ENTER
Press the Cursor buttons (
and date.
) to set the correct time
MANUAL
Time
Date
Press the ENTER button to finish this setting.
: 12 : 00 : 00
: 11. 6. 03
ENTER
:select
: store
:wählen ENTER
: speichern
EXIT : abbrechen
:: exit
zurück
EXIT
MENU
Checking the Settings for Auto Setup
To confirm that the TV Stations have been tuned correctly by Auto Setup
On-Screen Display
MENU
EXT LINK TV ASPECT
Press the MENU button to display the OSD Menu on
the TV screen.
1
TV/TEXT
TRACKING/V-LOCK
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
CH
Press the Cursor buttons (
press the ENTER button.
2
VOLUME
1
INDEX
INPUT SELECT
PROG PLAY AUDIO
3
ENTER
2,3
CH
I-TIMER
PDC
SL/LP/EP
Tuning
Clock set
Others
Tuning
4
2,3
ENTER
PROG./CHECK
Timer recording
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
VIDEO Plus+
REC
) to select [Tuning] then
Menu
TIMER
OFF TIMER OSD/DISPLAY RESET/CANCEL
Press the Cursor buttons (
) to select [Manual] then
press the ENTER button to display the list of tuned TV
stations and confirm that all available TV stations have
been set correctly. Positions 5 and 6 may differ from the
example shown. If Channel 5 is received, it is usually
found on programme position 5 and a connected
satellite receiver on programme position 6. If Channel 5
is not received but a satellite receiver is connected, then
the satellite receiver is found on programme position 5.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
EXIT
4
Press the EXIT button to exit the On-Screen Display.
Manual
Auto-Setup
Shipping condition
Owner ID
Tuning
Pos Name
1
2
3
4
5
BBC1
BBC2
ITV
CH4
CH5
Ch
22
23
24
25
26
Pos Name
Ch
6
7
8
9
10
-----------
----------------
List of tuned TV stations
(example)
If the station names and/or channel numbers have not been set correctly.
See page 34 of Operating Instructions for details.
When no stations have been set, confirm all connections and restart Auto Setup.
You can restart Auto Setup, without using remote controller, by pressing some buttons on the front
of the unit. Hold down
and
on the main unit simultaneously for about 5 seconds.
Notes:
!
!
If the station name is [
]:
The asterisks indicate that Auto Setup found a station but did not assign a name to it (due to a weak signal).
Stations on the list marked by an asterisk will need to be named manually. (See page 35 of Operating Instructions.)
If the station name is [- - - -]:
The dashes represent unused channel positions.
Stations on the list marked by dashes will need to be set manually. (See page 34 - 36 of Operating Instructions.).
-5-
Removing Interference
TV screen
In some cases, interference (lines or patterning) or a very poor picture may appear on the TV when the
VCR is connected. If this happens, follow the steps below to change the video playback channel (RF
output channel) to remove the interference.
On-Screen Display
The picture with interference
VCR
TV
Set the VCR/TV switch to VCR.
1
VCR Ch:28
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
MENU
Press the MENU button for more than 5 seconds.
The RF output channel number is displayed on the
VCR display.
2
EXT LINK TV ASPECT
TV/TEXT
TRACKING/V-LOCK
CH
VOLUME
INPUT SELECT
INDEX
PROG PLAY AUDIO
VIDEO Plus+
3
Test pattern indication
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3
2
3
REC
1
2
3
4
5
6
7
8
9
0
5
CH
ENTER
1
Press the Numeric buttons or use the Channel button
to select a channel number, which differs by 2 or 3 from
the present channel number. (For example, if the
original channel number was 28, enter 31.)
Set the RF output channel of the VCR to [- -] (RF OFF)
if the VCR is connected to the TV via the 21-pin Scart
cable.
Press the 0 numeric button or Channel button to display
[- -]. Skip step 4, if using a 21-pin Scart cable.
CH
21
...
VCR display
Indication when the RF output
channel is 28 (example)
Indication after changing the RF
output channel to 31 (example)
68
(RF OFF)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
4
Retune your TV until you receive the Test pattern. It
may be necessary to repeat steps 2 and 3 above until
you can see the Test pattern clearly.
VCR Ch:31
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
5
Test pattern indication
Press the ENTER button to finish this setting.
The clear picture
-6-
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement