Panasonic NVHV61GH Operating Instructions

Add to my manuals
18 Pages

advertisement

Panasonic NVHV61GH Operating Instructions | Manualzz
NV-HV61GH.book
1 ページ 2004年3月4日 木曜日 午前9時13分
Operating Instructions
使用說明書
Video Cassette Recorder
Model No.
NV-HV61GH
Contents
Warning and Important Information
Page
2
Controls and Components
3
Connections
4
Tuning the TV to Your VCR
5
Storing TV Broadcasts in Your VCR
5
Setting the Clock of Your VCR
7
Settings Using the On Screen Display
7
Option Setting
8
Playback
9
Recording
10
Timer Recording
13
Search Functions
15
Before Requesting Service
17
Specifications
18
Before attempting to connect, operate or adjust this product,
please read these instructions completely.
RQTV0006
NV-HV61GH.book
2 ページ 2004年3月4日 木曜日 午前9時13分
Longrun Head System
Warning and Important Information
This longrun head system enables approximately 8,000 hours
of recording/playback in high quality images.
Newly developed head cylinder with narrower head windows
and tapered cylinder design effectively protects heads from
dust and prevents head clogging.
Plus, [Alumina] Head Cleaner further enhanced cleaning
efficiency.
• Based on in-house tests with Panasonic video cassettes.
Actual head life may vary according to conditions of use,
tape type, temperature, humidity, etc.
As this equipment gets hot during use, operate it in a
well ventilated place;
Do not install this equipment in a confined space
such as a book case or similar unit.
WARNING:
To reduce the risk of fire, electric shock or product
damage, do not expose this equipment to rain,
moisture, dripping or splashing and ensure that no
objects filled with liquids, such as vases, shall be
placed on the equipment.
Cautions before you operate this VCR
Avoid:
• Humidity and dust.
• Extreme heat such as direct sunlight.
• Magnets or electromagnetic objects.
• Touching internal parts of the VCR.
• Water or some other liquid.
• Lightning. (Disconnect the aerial plug from the VCR during
lightning storms.)
• Anything heavy on the VCR.
• Connecting or handling the equipment with wet hands.
• Using a cell phone near the VCR because doing so may
cause noise to adversely affect the picture and sound.
Important
Your attention is drawn to the fact that the recording of
pre-recorded tapes or discs or other published or broadcast
material may infringe copyright laws.
For your safety
Do not remove outer cover.
Touching internal parts of the VCR is dangerous, and may
seriously damage it.
To prevent electric shock, do not remove cover. There are no
user serviceable parts inside. Refer all servicing to qualified
service personnel.
Do:
• Wipe the VCR with a clean and dry cloth.
• Install the VCR in a horizontal position.
• Keep the VCR, TV and other equipment switched off until
you have finished all connections.
Inserting Remote Control
Batteries
Insert the batteries with the
polarity (+ and -) correctly
aligned.
Condensation may form in the following cases:
• The VCR is brought from cold surroundings into a
well-heated room.
• The VCR is suddenly brought from cool surroundings, such
as an air-conditioned room or car, to a place which is hot
and humid.
Notes:
The service life of the batteries is approximately 1 year.
However, it varies considerably depending on the frequency
of use.
• When they are exhausted, replace them with two AA, UM3,
or R6 size batteries.
• When the batteries are exhausted, remove them
immediately and dispose them correctly.
• Do not mix old battery with new battery.
• Do not mix different battery types, i.e. Alkaline and
Manganese.
• Do not use rechargeable (Ni-Cd) batteries.
• Do not heat or short-circuit the batteries.
• When you do not use the remote control for a long time, take
out the batteries and store them in a cool, dry place.
Note:
• In any of the above-mentioned conditions, do not operate
the VCR for at least 1 hour. This VCR is not equipped with a
dew sensor.
Press [VCR-ON/OFF] (1) to switch the VCR from ON to
standby mode or vice versa. In the standby mode, the VCR is
still connected to the mains.
Plug in Auto Tuning
(Setting image illustration)
(1)
AUTO TUNING
IN PROGRESS,
PLEASE WAIT.
(2)
CH 22
SEARCH
21
END : MENU
¢
(4)
(1) Connect the aerial cable.
(2) Connect the mains lead.
(3) Press [VCR-ON/OFF] (1).
(4) Plug in Auto Tuning is completed.
¢ On Screen Display
All broadcasting stations that can be received in the
area are automatically tuned and stored in memory.
• Do not turn off the VCR halfway. (See page 5.)
(3)
2
NV-HV61GH.book
3 ページ 2004年3月4日 木曜日 午前9時13分
ENGLISH
Controls and Components
VCR
(16)
(17)
(18)
TV
(1)
(2)
CH
VOL
AV
(1)
(34)
(19)
EJECT
TIMER REC
1
2
CH
(4)
(5)
(6)
(7)
(8)
(9)
5
6
7
8
9
0
-/- -
CANCEL INPUT SEL AUDIO PROG PLAY
TIMER
CHECK
PROG
(14)
(15)
I-TIMER
(20)
(4)
(4)
(21)
(22)
(23)
(24)
PROG
CH
PLAY
(36) (37) (14) (38) (20)(39)
(40)
(41) (22) (10)(12) (8) (27)
NAVI
MENU
(10)
(11)
(12)
(13)
PLAY
TIMER
CHECK
3
4
STOP
REC/OTR
/ I
TRACKING/V-LOCK
(3)
(35)
(25)
(26)
(27)
(28)
ENTER
JET REW
PAUSE/SLOW
INDEX
REPEAT RESET
TIMER REC REC MODE
STATUS/
NAVI CHECK
(29)
(30)
(31)
(32)
(33)
(42)
(43) (44)
(45)
VIDEO 2
2 IN
AC IN ~
L 2
AUDIO
R 2
2 OUT
IN (AV1)
RF
OUT
(46) (47)
VCR Operation
(24) [I-TIMER]
(1) [VCR-ON/OFF]
(25) [NAVI]
(2) [AV]
(26) [ENTER]
(3) [Numeric]
(27) [Fast Forward]
To select the programme positions (199).
• Example:
9:
9
19:
-/- -
1
9
To enter numbers for various settings.
(4) No function
(5) [CANCEL]
(48)
TV Operation using the remote
control
(29) [PAUSE/SLOW]
You can use [TV-ON/OFF] (17)*1, [AV]
(2)*2, [VOLUME] (19)*3 and [Channel]
(18)*4 on the remote control for your TV
operation.
(See page 4.)
(30) [REPEAT]
*1
(28) [4, 3, 2, 1] (Cursor buttons)
(31) [RESET]
To reset the tape counter (elapsed
time) to [0:00.00].
• The tape counter is automatically
reset to [0:00.00] when a video
cassette is inserted.
(6) [INPUT SELECT]
(32) [STATUS/ NAVI CHECK]
(7) [PROG]
(33) [REC MODE]
(8) [PLAY]
(34) Cassette compartment
(9) [MENU]
(35) [EJECT]
(10) [Rewind]
(36) VIDEO IN socket (AV 2)
(11) [JET REW]
(37) AUDIO IN sockets (AV 2)
(12) [STOP]
(38) [REC/OTR]
(13) [INDEX]
(14) [TIMER (REC)]
(39) Infra-red Remote Control Receiver
window
(15) [REC]
(40) VCR display
(16) Infra-red transmitter
(41) [TIMER CHECK]
(17) [TV-ON/OFF]
(42) AC Input socket
(18) [Channel]
(43) VIDEO IN socket (AV 1)
(19) [VOLUME]
(44) VIDEO OUT socket
(20) [Channel]/[TRACKING/V-LOCK]
(45) RF IN socket
(21) [AUDIO]
(46) AUDIO IN sockets (AV 1)
(22) [PROG PLAY]
(47) AUDIO OUT sockets
(23) [CHECK]
(48) RF OUT socket
3
To switch the TV on from standby
mode (OFF) or vice versa.
On some TVs it is only possible to
switch the TV to standby mode (OFF)
with this button, but not on. In this
case, try to turn the TV on with one of
the following buttons:
[AV] (2)
[Channel] (18)
*2
To select desired AV input on the TV.
*3 To adjust the volume of the TV.
*4
To select the desired programme
position (TV station) on the TV.
Note:
• You cannot operate TV channels with
[Numeric] (3). When you want to
change the channel, press [Channel]
(18) on TV operation part.
NV-HV61GH.book
4 ページ 2004年3月4日 木曜日 午前9時13分
Setting the Remote Control to Operate
Your TV
Connections
You can operate the TVs of the manufacturers listed below
with the remote control after setting it.
This section shows you how to connect the VCR to an aerial,
TV, etc.
This setting procedure allows you to operate the TVs of some
manufacturers using the supplied remote control.
When the VCR is turned on after unpacking and
connecting the aerial cable and the mains lead, Plug in
Auto Tuning starts automatically.
Preparation
• Turn on the TV.
Basic Connections
Operations
1 Find the manufacturer number of your TV while
referring to the following table.
The following connections are required to record and play
back the video cassette through the TV.
2 While holding down [TV-ON/OFF] (17) on the remote
control, use [Numeric] (3) to enter the manufacturer
number. This completes the settings for the TV
manufacturer.
• Be sure to enter the number in two digits.
Example: 1 ) 01
(1)
(3)
(4)
3 To confirm the correct settings were made, check
whether the TV can be operated properly.
• When a manufacturer has multiple numbers in the
following table, try entering other numbers if the TV
operations cannot be performed properly, and then select
the optimal number.
VIDEO 2
L 2
AUDIO
(6)
Panasonic/National
01-04
SONY
05
TOSHIBA
06
R 2
2 OUT
IN (AV1)
RF
OUT
(5)
¢
(1)
(2)
(3)
(4)
(5)
(6) AC Input socket (42)
¢ To mains supply
Aerial (Not supplied)
TV Set (Not supplied)
Aerial Connector
RF IN socket (45)
RF OUT socket (48)
Connection to a TV using the Audio/Video Input Socket:
Set the RF output channel of the VCR to [ss] (RF OFF)
when the VCR is connected to the TV via the Audio/Video
cable. (See page 5.)
List of TVs Compatible with the VCR Remote Control
[Code]
2 IN
AC IN ~
Notes:
• If you are using a Panasonic TV, this setting has already
been made, and so you do not need to perform the above
setting procedure. However, this remote control may not
work with some Panasonic TVs.
• Some TV models cannot be operated using this remote
control (including all TVs non-remote compatible).
[Brand]
(2)
(1)
(3)
(2)
(4)
(5)
(6)
JVC
07
HITACHI
08
(7)
VIDEO 2
2 IN
AC IN ~
L 2
AUDIO
MITSUBISHI
09, 10
SHARP
11
PHILIPS, SAMSUNG
12
NEC
13
SANYO
14
GOLDSTAR/LG
15, 16
SAMSUNG
17, 18
SANYO
19
(10)
R 2
2 OUT
IN (AV1)
RF
OUT
(9)
(8)
¢
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9) VIDEO OUT (44)/
AUDIO OUT (47)
(10)AC Input socket (42)
¢ To mains supply
Aerial (Not supplied)
TV Set (Not supplied)
Aerial Connector
VIDEO IN
AUDIO IN
AV Cable (Supplied)
RF IN socket (45)
RF OUT socket (48)
Connection to a Stereo Amplifier:
(2)
¢
VIDEO 2
AC IN ~
L 2
2 IN
AUDIO
R 2
2 OUT
IN (AV1)
OUT
(3)
(1)
RF
(5) (4)
(1)
(2)
(3)
(4)
(5)
4
Stereo amplifier (Not supplied)
For RECORDING
For PLAYBACK
AUDIO OUT (47)
AUDIO IN (46)
¢ Audio Cables (Not supplied)
NV-HV61GH.book
5 ページ 2004年3月4日 木曜日 午前9時13分
Tuning the TV to Your VCR
Storing TV Broadcasts in Your VCR
The VCR supplies a signal to the TV via the RF coaxial cable
on channel E21-E69.
If you have connected the VCR to the TV through the Audio/
Video input sockets, then you do not need to follow the
procedure below. To view the pictures from the VCR, set to
the AV mode on the TV with [AV] (2).
The VCR is fitted with its own tuner (just like a normal TV) and
can be preset to receive up to 99 TV broadcast stations.
Plug in Auto Tuning
When the VCR is turned on after connecting the aerial cable
and the mains lead, Auto Tuning starts.
Preparation
• Turn on the TV and the VCR.
AUTO TUNING
IN PROGRESS,
PLEASE WAIT.
Operations
1 Set the TV to an unused position which you wish to
use for your video playback.
• Tune the TV until the display shown below appears on
the screen. (Please refer to the TV manufacturers
operating instructions regarding tuning.)
• Set [RF SELECT] by pressing [2 1] (28) to select the
colour TV system used by the TV set to be connected.
BG:
I:
DK:
M:
CH 22
SEARCH
21
END: MENU
Auto tuning searches for TV stations from VHF minimum to
UHF maximum and memorizes every tuned programme
position.
To Cancel Auto Tuning Mid-Operation:
Press [MENU] (9) during Auto Tuning.
PAL B.G.H/SECAM B.G
PAL I
PAL D/SECAM D.K.K1
NTSC
If Auto Tuning stops halfway, follow the next procedures to
restart Plug in Auto Tuning.
To Restart Plug in Auto Tuning:
AUTO TUNING
IN PROGRESS,
PLEASE WAIT.
CH 22
SEARCH
AUTO TUNING IS
COMPLETED.
21
END: MENU
During Plug in Auto Tuning
RF SELECT
BG [ I ] DK M
RF SELECT:
END: MENU
If Auto Tuning stops halfway by cancelling or playback;
1 Press [EJECT] (35) and remove the video cassette.
2 Keep both [Channel] (20) I and J on the VCR
pressed simultaneously for 3 seconds or more during
the VCR on.
• The channel displayed on the VCR display disappears for
a moment then changes to 1.
After Plug in Auto Tuning
2 Press [MENU] (9).
• If Auto Tuning stops halfway, refer to the right, “To Restart
Plug in Auto Tuning”.
To Change the RF output Channel
You can change the RF output channel, for example, when
interference occurs on the picture after tuning.
3 Disconnect the mains lead and then reconnect it.
Operations
1 Hold down [MENU] (9) for 5 seconds or more.
• The VCR display changes as shown below and the VCR
picture on the TV displays this pattern.
4 Turn off the VCR and then turn it on.
• Auto Tuning commences.
If Auto Tuning stops halfway by turning the VCR off or a
power failure,
Or if the VCR is turned on without the aerial connected
and all channels are skipped:
Panasonic VCR
RF SELECT
RF SELECT:
1 Disconnect the mains lead and then reconnect it.
BG [ I ] DK M
END: MENU
2 Turn off the VCR and then turn it on.
• Auto Tuning commences.
2 Enter the desired channel number (E21-E69) by
[Numeric] (3) or [Channel] (20).
• Set the RF output channel of the VCR to [ss] (RF OFF) when
the VCR is connected to the TV via the Audio/Video cable.
Press [Channel] (20) to display [ss].
21
69
ss
(RF OFF)
• It is also possible to select by pressing [Numeric] (3).
Example: 28: 2
8
3 Press [MENU] (9) to finish the setting mode.
4 Retune your TV to the new RF channel for the VCR.
Note:
• Even if the RF output channel has been changed, it is not
necessary to perform Auto Tuning.
5
NV-HV61GH.book
6 ページ 2004年3月4日 木曜日 午前9時13分
Auto Tuning Using the On Screen Display
Manual Tuning Procedure
Introduction
The VCR is tuned automatically by Plug in Auto Tuning.
However, Auto Tuning using the On Screen Display should be
performed according to the following method if necessary.
If the VCR is not correctly tuned by Auto Tuning, follow the
procedure below.
Preparations
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Turn on the VCR and select any programme position except
A1 or A2.
2 Press [43] (28) to select [TUNER PRESET] then
press [ENTER] (26).
Operations
1 Press [MENU] (9) to display the
Main menu on the TV screen.
5 Press [43] (28) to select [AUDIO SYSTEM] then select
the broadcasting system by pressing [2 1] (28).
1 Press [MENU] (9) to display the Main menu on the TV
screen.
3 Press [43] (28) to select [CH] then select the channel
number you want to tune by pressing [2 1] (28).
4 Confirm that [CLEAR] is set to [OFF].
MENU
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
TAPE REFRESH
NAVI MEMORY 0PROG.
, ENTER
SELECT :
: MENU
END
2 Press [43] (28) to select
[TUNER PRESET] then press
[ENTER] (26).
BG:
I:
DK:
M:
6 Press [43] (28) to select [COLOUR SYSTEM] then
select [AUTO] by pressing [2 1] (28).
• The VCR automatically distinguishes between PAL and
SECAM broadcasts.
• If the picture lacks of colour when [AUTO] is selected,
select [MESECAM] or [PAL].
MENU
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
TAPE REFRESH
NAVI MEMORY 0PROG.
SELECT :
, ENTER
END
: MENU
3 Press [43] (28) to select
[AUTO TUNE] then press [2 1]
(28) to start the Auto Tuning.
• When Auto Tuning is completed,
the On Screen Display
disappears and programme
position 1 is selected.
7 Press [43] (28) to select [SEARCH] then press [2 1]
(28) to start the Manual Tuning.
• If the desired TV station has not been tuned, press
[2 1] (28) again.
• Press [MENU] (9) and repeat steps 3-7 for each
programme position you want to tune to a station.
TUNER PRESET
CH 1
[OFF]
CLEAR
AUDIO SYSTEM
[I]
COLOUR SYSTEM
[AUTO]
AUTO TUNE
SEARCH
[3]
FINE
SELECT:
PAL B.G.H/SECAM B.G
PAL I
PAL D/SECAM D.K.K1
NTSC
END : MENU
AUTO TUNING
IN PROGRESS,
PLEASE WAIT.
CH 1
SEARCH
100
END : MENU
CH 2
CH 2
SEARCH
SEARCH 74
END: MENU
END: MENU
The number displayed here
is the number of channels
still to be auto tuned.
8 Press [MENU] (9) three times to exit the On Screen
Display.
Channels that can be received
SYSTEM
B
G
I
D
K
CCIR Standard
(B.G.H)
Hong Kong
Special
Administrative
Region of China,
UK (I)
VHF
E2-E12
UHF
CATV
E21-E69
S01-S05
M1-M10
U1-U10
S21-S41
Direct Tuning
Follow steps 1 to 4 of Manual Tuning Procedure.
5 Press [43] (28) to select [SEARCH].
6 Press [Numeric] (3) to enter the number of the desired
programme position.
• For other channels that require tuning, repeat steps 3, 4,
5, 6.
s
E21-E69
s
East Europe
(D.K.K1)
R1-R12
E21-E69
44-470 MHz
China (D)
C1-C12
C13-C57
Z1-Z35
USA (NTSC)
2-13
14-79
5A
A-5-FFF
JAPAN (NTSC)
1-12
13-62
C13-C63
7 Press [MENU] (9) twice to exit the On Screen Display.
Fine Tuning Procedure
M
Follow steps 1 to 4 of Manual Tuning Procedure.
5 Press [43] (28) to select
[FINE] then press [2 1] (28) to
obtain the best tuning condition.
• Press [ENTER] (26) to return the
tuning to its former state.
6 Press [MENU] (9) to exit the On
Screen Display.
Notes:
• Auto Tuning searches for TV stations from VHF minimum to
UHF maximum and memorizes every tuned programme
position. Other programme positions are skipped.
• Auto Tuning takes 5 or more minutes to complete its search.
CH 2
FINE
:
AFC: ENTER
END: MENU
Blanking of Unused Programme Positions
Follow steps 1 to 3 of Manual Tuning Procedure.
4 Press [43] (28) to select [CLEAR] then press
[2 1] (28) to select [ON].
• Repeat steps 3, 4 for other unused programme positions
to skip during the selection of programme positions.
• To cancel the blanking of a programme position, select
that programme position then set [CLEAR] to [OFF].
6
5 Press [MENU] (9) twice to exit the On Screen Display.
NV-HV61GH.book
7 ページ 2004年3月4日 木曜日 午前9時13分
Setting the Clock of Your VCR
Settings Using the On Screen
Display
In the event of a power failure, the clock will operate on its
back up system for a minimum of 3 years. After 3 years, clock
back up in the event of a power failure can only be
guaranteed for maximum of 1 hour.
Preparations
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Turn on the VCR.
Preparations
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Turn on the VCR.
Operations
1 Press [MENU] (9) to display the
Main menu on the TV screen.
2 Press [43] (28) to select [CLOCK
SET] then press [ENTER] (26).
To Set the Colour TV System
1 Press [MENU] (9) to display the
Main menu on the TV screen.
2 Press [43] (28) to select
[SYSTEM] then press [ENTER]
(26).
MENU
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
TAPE REFRESH
NAVI MEMORY 0PROG.
SELECT :
, ENTER
END
: MENU
SYSTEM
AUTO
PAL
MESECAM
NTSC
B/W
SELECT:
END
:MENU
3 Press [43] (28) to select
[AUTO].
• The VCR automatically distinguishes between PAL,
SECAM/MESECAM and NTSC signals. If the picture
lacks of colour during AV external recording or playback,
set to [PAL], [MESECAM] or [NTSC].
• When you want to record or play back in black and white,
set to [B/W].
MENU
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
TAPE REFRESH
NAVI MEMORY 0PROG.
SELECT :
, ENTER
END
: MENU
4 Press [MENU] (9) twice to exit the On Screen Display.
3 Set each item by pressing
[2 1 4] (28). Press [3] (28) to
return to the previous item.
At the set time (TIME) point:
• When [2 1] (28) is kept pressed,
the indication changes in 30-minute
steps.
To Make Various Indicators Appear On
Screen Display
CLOCK SET
YEAR
MONTH
DATE
TIME
2004
9
1 [WE]
0:00
At a press of [STATUS/ NAVI
123
45 6
CHECK] (32), the following
indications appear on the TV
CH 1
0:00.22
STEREO
SP
L R
PAL
screen.
• Set [OSD] to [AUTO].
(See page 9.)
12 / 12. [ FR ]
• The display is released
ON 20:13 CH2 DRAMA
automatically after 5 seconds.
SELECT:
START: MENU
4 Press [MENU] (9).
• The clock starts.
7
8
9
1 Audio Output Mode Indicators
At each press of [AUDIO] (21), the selected sound mode is
indicated with Left (L) and Right (R).
Time Reset Function
If the clock is less than 2 minutes slow or fast, it can easily be
reset to the proper time.
Stereo: Both the Left (L) and Right (R) Indicators appear.
Left:
The Left (L) Indicator appears.
Right: The Right (R) Indicator appears.
Normal: Neither the Left (L) nor Right (R) Indicator appears.
• At every push of this button, the audio output mode
changes as follows.
Example:
Resetting the clock to 12:00.00
1 Press [MENU] (9) to display the Main menu on the TV
screen.
2 Press [43] (28) to select [CLOCK SET] then press
[ENTER] (26).
During playback:
Stereo # L # R # Normal audio track # Stereo
3 When the current clock displays on the VCR is
between 11:58.00 and 12:01.59, press [MENU] (9) as
soon as you see the 12:00.00. This resets the time to
12:00.00.
While the broadcast signals are being received:
Stereo # L # R # Normal # Stereo
2 STEREO, M1 and M2 Indicator
When receiving a TV programme with the Stereo, Bilingual
or NICAM sound system, the type of sound system in
which it is broadcast is automatically indicated.
STEREO:When receiving a Stereo/NICAM stereo
broadcast.
M1/M2: When receiving a Bilingual/NICAM dual-sound
broadcast.
M1:
When receiving a NICAM monaural broadcast.
• To hear stereo performance connect as shown on page 4
to a TV or Stereo Amplifier with left and right audio inputs.
3 Programme position
7
NV-HV61GH.book
8 ページ 2004年3月4日 木曜日 午前9時13分
4 Tape running display
Option Setting
Stop, Eject
Rewind, Review,
Index Search:,
Jet Search6,
Jet Rewind
6
Fast Forward, Cue,
Index Search 9,
Jet Search 5
5
Playback
1
Recording
¥
Recording pause
;¥
Repeat playback
R1
MENU
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
TAPE REFRESH
NAVI MEMORY 0PROG.
SELECT :
, ENTER
END
: MENU
Present time
17:24
Tape counter
0:02.54
Remaining tape time
REMAIN 2:34
Index Search
S 01
OTR indication
OTR 60
JET Rewind
J . REW
END : MENU
2 Press [43] (28) to select [OPTION] then press
[ENTER] (26).
3 Press [43] (28) to select the desired field.
5 Present time/Tape counter/Remaining tape time/Index
Search/OTR indication/JET Rewind
Display
SELECT:
1 Press [MENU] (9) to display the Main menu on the TV
screen.
TAPE SELECT:
Information
OPTION
TAPE SELECT
[AUTO]
NTSC INPUT SELECT
[AUTO]
NTSC PB SELECT
[onPALTV]
JET NAVIGATOR
[OFF]
DELETE NAVIDATA
[NO]
OSD REC
[OFF]
OSD
[AUTO]
MONAURAL
[OFF]
To select the corresponding video
cassette tape length to display the
approximate remaining tape time.
• Press [2 1] (28) to select the corresponding video
cassette tape length.
AUTO: The VCR automatically distinguishes E30, -60,
-90, -120, -180 and -240 tapes.
E195: For E195 tape
E260: For E260 tape
E300: For E300 tape
• The remaining tape time may not be displayed correctly
depending on the tape used.
NTSC INPUT SELECT: To select the colour TV system
used to record NTSC signals.
6 Tape Mode/Rec Mode indicator (SP/LP/EP)
• Press [2 1] (28) to select [AUTO]. Allows NTSC [4.43]
or [3.58] signals to be distinguished automatically.
7 Cassette-in indicator
• If the tape has not recorded correctly, select 4.43 or 3.58.
4.43: When recording NTSC 4.43 signals.
3.58: When recording NTSC 3.58 signals.
• Some programmes on NTSC 3.58 system cannot be
recorded correctly by selecting [3.58].
8 Colour system indicator
Any selected colour TV system except [AUTO] appears on
screen display. See pages 6 and 7.
9 NAVI CHECK indicator
During playback, press the [STATUS/ NAVI CHECK] (32)
repeatedly until the NAVI CHECK indicator appears. You
can check the property of the programme being played.
However, this function is effective only for programmes
recorded with setting the [JET NAVIGATOR] to [ON]. (See
to the right.)
NTSC PB SELECT:
To select the colour TV system of
the TV used to play back a tape
recording NTSC signals.
• Press [2 1] (28) to select the desired position according
to the colour TV system of the TV.
Clock # Counter # Remaining Tape Time #
# NAVI CHECK indicator # Clock
on PAL TV: For TVs that can receive PAL signals.
4.43: For TVs that can receive NTSC 4.43 signals.
3.58: For TVs that can receive NTSC 3.58 signals.
• When the VCR is checking the programme data, the
message [CHECKING DATA] is displayed.
• When the programme data cannot be found, the
message [DATA NOT FOUND] appears.
JET NAVIGATOR:
To set the conditions for the Jet
Navigator Function.
• Press [2 1] (28) to select [ON] or [OFF].
Note:
• The On Screen Display may be disturbed or disappeared
during special playback.
OFF:
ON:
Initially set at this position.
Jet Navigator function works. If you select [ON],
[OSD REC] is set to [OFF] automatically.
DELETE NAVIDATA:
To delete all the Jet Navigator data
stored in the VCR memory.
• Press [2 1] (28) to select [ENTER] then press [ENTER]
(26) to do the deletion.
NO:
Initially set at this position.
ENTER: It is done to delete all the Jet Navigator data.
8
NV-HV61GH.book
9 ページ 2004年3月4日 木曜日 午前9時13分
OSD REC:
To set the conditions for the OSD
Recording function.
• Press [2 1] (28) to select [ON] or [OFF].
OFF:
ON:
Playback
Preparations
• Confirm that the VCR is on.
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Insert a recorded video cassette.
Initially set at this position.
This setting enables OSD Recording. (See page
11.) If you select [ON], [JET NAVIGATOR] is set
to [OFF] automatically.
For Normal Playback:
Press [PLAY] (8).
OSD:
To select the On Screen Display
mode.
• Press [2 1] (28) to select [AUTO] or [OFF].
AUTO: To make various indicators appear On Screen
Display for 5 seconds press [STATUS/ NAVI
CHECK] (32).
OFF: No indications appear.
For Cue or Review Playback:
During playback, tap [Fast Forward] (27) or
[Rewind] (10).
• To return to normal playback, press [PLAY] (8).
• If you press and hold down [Fast Forward] (27)
or [Rewind] (10), cue or review playback
continues for as long as you keep the button
pressed, and operation returns to normal
playback when the button is released.
MONAURAL:
To select the sound mode.
• Press [2 1] (28) to select [ON] or [OFF].
ON:
OFF:
To record the normal sound during a NICAM
broadcast or if the stereo sound is distorted due
to inferior reception conditions.
Normally set at this position.
For High speed Cue or Review Playback (JET SEARCH):
During playback, tap [Fast Forward] (27) or [Rewind] (10)
twice.
4 Press [MENU] (9) twice to exit the On Screen Display.
For Still Playback:
During playback, press [PAUSE/SLOW] (29).
• To return to normal playback, press [PLAY] (8)
or [PAUSE/SLOW] (29).
For Slow Playback:
During playback, keep [PAUSE/SLOW] (29)
pressed for 2 seconds or more.
• To return to normal playback, press [PLAY] (8).
Fast-forwarding or Rewinding the Tape:
Press [Fast Forward] (27) or [Rewind] (10) in the stop mode.
• To stop fast-forwarding or rewinding, press [STOP] (12).
To Obtain a Higher Speed Rewind (Jet Rewind):
Press [JET REW] (11).
The [J . REW] indication appears on the TV screen and only
the channel position appears on the VCR display (except
when the remaining tape time indication appears).
• Depending on a cassette or an operating condition, the
rewind speed may change somewhat.
• The tape counter is reset to [0:00.00] when the tape is
rewound to the beginning.
To Stop Playback:
Press [STOP] (12).
Notes:
• JET SEARCH, cue, review or slow playback will be
automatically cancelled after 10 minutes, and still playback
after 5 minutes.
• During playback function other than normal playback,
horizontal noise bars may appear in the picture, the colour of
the picture may be unstable, or the picture may be otherwise
distorted.
• When you play back a tape recorded in the LP mode, the
picture may be in black and white.
• When you play back a tape recorded in the EP mode, the
picture and the sound may be unstable.
However, these are not malfunctions.
9
NV-HV61GH.book
10 ページ 2004年3月4日 木曜日 午前9時13分
To Play back S-VHS Cassette Tape
(SQPB=S-VHS Quasi Playback)
Recording
It is also possible to play back tapes recorded in the S-VHS
system.
• Some picture noise may occur depending on the type of
tape used.
• It is not possible to fully obtain the high resolution that SVHS is capable of.
• It is not possible to record in the S-VHS system with this
VCR.
Preparations
• Confirm that the VCR is on.
• Confirm that the TV is on and the VCR viewing channel is
selected.
Operations
1 Insert a video cassette with an intact erasure
prevention tab.
• If it has already been inserted, press [VCR-ON/OFF] (1)
to turn the VCR on.
To Play Back a Recorded Part Repeatedly
Press [REPEAT] (30). The [R] indication
appears on the VCR display.
• A recorded part on the tape must be at
least 15 minutes long.
• When recording over the same location on
a tape, it may not function correctly.
2 Select the TV station using
[Channel] (20).
• It is also possible to select by
pressing [Numeric] (3).
3 Press [REC] (15) ([REC/OTR]
(38)) to start recording.
To Cancel the Repeat Playback Mode:
Press [STOP] (12).
4 Press [STOP] (12) to stop
recording.
NTSC Playback
To Select the Desired Rec Mode
Tapes recorded in the NTSC system can be played back with
this VCR via a PAL system TV.
• Select [NTSC PB SELECT] from the On Screen Display
according to the colour TV system of the TV. (See page 8.)
• NTSC 3.58 recording requires [NTSC INPUT SELECT] to be
in the AUTO or 3.58 position (see page 8), however if [NTSC
INPUT SELECT] is in this position when recording a NTSC
3.58 signal, no colour is available for the PAL TV. Once the
recording is completed, you then need to select [on PAL TV]
to view the recording in colour on PAL TV.
• On some TVs, the playback picture may roll up or down.
If your TV has V-HOLD control or equivalent adjustment
function, use it to adjust the picture.
Press [REC MODE] (33) before recording.
• SP provides standard recording time, optimum
picture and sound quality.
LP provides double recording time with slightly
reduced picture and sound quality.
EP provides triple recording time with slightly reduced
picture and sound quality.
When you play back a tape recorded in the EP mode, the
monaural sound may be unstable.
When you start the recording in the EP mode, [EP] indication
on the VCR display flashes for about 8 seconds.
EP mode means Super Long Play (SLP).
Note for only NTSC Playback on PAL system TV
This function is designed to allow only the playback of tapes
recorded by NTSC signals on a PAL system TV. The NTSC
signal is not completely converted to a PAL signal. For this
reason, images play back by this function cannot be recorded
correctly on other VCRs.
To Pause Recording
Press [PAUSE/SLOW] (29) during
recording.
Press it again to continue recording.
Convenient Automatic Functions
To View One TV Programme while
Recording Another TV Programme
VCR Auto Power On
When you insert a video cassette, the VCR switches on
automatically.
After pressing [REC] (15) to start recording, select on your TV
the programme position of the TV programme that you want
to view.
Auto Playback Start
When you insert a video cassette with a broken erasure
prevention tab, playback starts automatically without press
[PLAY] (8).
To Prevent Accidental Erasure of
Recorded Contents
VCR-off Playback
When the VCR is off, the inserted cassette can be played
back by pressing [PLAY] (8).
Break out the erasure prevention tab after recording.
If you insert a video cassette with a broken out erasure
prevention tab and press [REC] (15) ([REC/OTR] (38)), the
indication flashes on the VCR display to indicate that
recording is not possible.
To record this video cassette again, cover the tab hole with
two layers of adhesive tape.
Auto Rewind
When the tape reaches the end, the VCR automatically
rewinds it to the beginning.
• This function does not work during timer recording, OTR
recording and fast-forwarding.
Automatic Switching Off and Ejection
When the VCR is switched off, the inserted cassette can be
ejected simply by pressing [EJECT] (35). The VCR will eject
the cassette and automatically turn itself off again.
To Eject Video Cassette Using the Remote
Control
Keep [STOP] (12) pressed for at least 3 seconds.
10
NV-HV61GH.book
11 ページ 2004年3月4日 木曜日 午前9時13分
To Display the Approximate Remaining
Tape Time
Important Note for the NICAM System
When The VCR is switched on, the tuner will automatically
switch to a NICAM broadcast, if NICAM is being transmitted.
At this time the NICAM signal is transmitted on stereo
channels only, since the M1 and M2 formats are not yet
available. Even if the sound track is MONO, the stereo
indicator will appear.
The remaining tape time can be displayed in the VCR display.
1 Select [TAPE SELECT] from the On Screen Display and
select the corresponding video cassette tape length.
See page 8.
2 Press [STATUS/ NAVI CHECK] (32) repeatedly until the
Remaining Tape Time appears on the VCR display.
To Record the Present Date and Time
(OSD Recording) on the same screen as
the picture
This function allows you to record the present date and time
on the same screen as the picture being recorded.
For certain cassettes, the remaining tape time may not be
displayed correctly.
Operations
1 Set [OSD REC] to [ON]. (See page
9.)
To reset the tape counter
Press [RESET] (31) to reset the tape counter (elapsed time)
to [0:00.00].
• The tape counter is automatically reset to [0:00.00] when a
video cassette is inserted.
• The tape counter is reset to [0:00.00] when you operate the
Jet Rewind function and the tape is rewound to the
beginning.
2 Press [REC] (15) ([REC/OTR]
(38)).
3 Press [STOP] (12) to stop
recording.
20:15.54
16.OCT.2004
Note:
• This function is also activated for OTR recording and Timer
recording.
Notes:
• When playing back a cassette recorded in the LP or EP
mode, some pictures and sound distortion may occur.
However, this is not a malfunction.
• The recording pause mode will be automatically cancelled
after 5 minutes and return to the stop mode.
• The tape recorded in the EP mode on this VCR cannot be
played back on the other VCR without EP mode function.
• On the other VCR (even with EP mode function), when you
play back the tape recorded in the EP mode, the picture and
the sound may be distorted. However, this is not a
malfunction.
To Select the Recording Duration and
Perform Timer Recording (OTR Recording)
OTR means One-Touch Recording and is called this way,
because you can start recording and select the recording
duration by repeatedly pressing a single button. This is very
convenient, for example when you want to start recording
immediately but need to go out or want to go to bed.
After the selected recording duration has elapsed, recording
stops and the VCR automatically switches off.
To Perform an OTR Recording:
1 Display the VCR picture on the TV.
Recording of Stereo or Bilingual
Programmes
2 Insert a video cassette with an intact erasure
prevention tab.
1 Recording is automatically made in the stereo or
bilingual mode. This prevents errors in the selection of
the dubbed or the original language.
3 Press [Channel] (20) to select the programme position
on which the TV programme to be recorded will be
broadcast.
2 During playback press [AUDIO] (21) to select the
desired sound mode. (See page 7.)
4 Press [REC/OTR] (38) to start recording.
5 Press [REC/OTR] (38) repeatedly to select the desired
recording duration.
• Every time you press this button, the recording duration
indicated in the VCR display changes in the following
order.
• For example, if you select [30], the VCR records a
programme for 30 minutes.
The NICAM Broadcast System
The VCR is equipped with the NICAM sound system. NICAM
is a 2 channel sound broadcast system to provide either a
high quality stereo sound track or 2 independent MONO
sound tracks, M1 and M2.
NICAM programmes are always accompanied by standard
sound broadcasts and you can select the desired sound with
[AUDIO] (21) during playback.
• The NICAM digital stereo sound can only be recorded on the
Hi-Fi audio track.
• When NICAM programme is being received, the indicators
are lit to inform you the type of broadcast. (See page 7.)
• To record the regular sound (ordinary normal sound) on the
FM audio tracks when a NICAM programme is received, set
[MONAURAL] to [ON]. (See page 9.)
• To hear stereo performance connect as shown on page 4 to
a TV or Stereo Amplifier with left and right audio inputs.
Counter display (normal recording mode) # 30 (min.) #
60 (min.) # 90 (min.) # 120 (min.) # 180 (min.) #
240 (min.) # Counter display (normal recording mode)
To Stop the OTR Recording Before the End:
Press [STOP] (12).
Notes:
• The OTR function works during normal recording.
• When the tape reaches its end during OTR recording, the
VCR will turn itself off.
11
NV-HV61GH.book
12 ページ 2004年3月4日 木曜日 午前9時13分
Recording from an external source
Operations
1 Press [PLAY] (8) to start playback.
This function can be used to make up an edited tape from
other recordings or video sources.
A new scene can be added to the end of previous one.
2 At the point where you want to join a new scene, press
[PAUSE/SLOW] (29) to put it in the still playback
mode.
Recording VCR
3 Press [REC] (15) to put it in the recording pause mode.
(1)
TIMER REC
4 Start playback on the source unit and search for the
point from which you want to record (copy) onto this
VCR.
REC/OTR
VIDEO
/ I
5 When that point is reached, press [PAUSE/SLOW] (29)
again to start recording the new picture and sound
from the playback unit.
L
(2)
AUDIO
R
IN (AV1)
OUT
6 To record (copy) additional scenes, press [PAUSE/
SLOW] (29) to put this VCR in the recording pause
mode and then perform above steps 4 and 5 again.
(3)
(1) AV 1
(VIDEO IN (43)/AUDIO IN (46))
(2) AV 2
(VIDEO IN (36)/AUDIO IN (37))
7 At the point where you want to stop recording, press
[STOP] (12) to finish recording.
(3) Other VCR or Video movie
camera
Note:
• If you leave the VCR in the recording pause mode for more
than 5 minutes in step 3 or 6, the VCR automatically
switches over to stop mode to protect the video heads.
Preparations
• Connect a video movie camera or another VCR to this VCR
as shown.
• Display the VCR picture on the TV.
• Insert the cassette on which the copying is to be performed,
and make sure that its erasure prevention tab is not broken
out.
• Select the audio/video source required by pressing
[INPUT SELECT] (6) to set A1 or A2.
A1:
A2:
To Delete all of a Cassette’s
Contents (Tape Refresh Function)
You can delete a cassette contents (the picture, the sound
and the Jet Navigator data) all at once.
Operations
1 Be sure to set [JET NAVIGATOR] to [ON] when you
want to delete all contents of a cassette that is
recorded while setting [JET NAVIGATOR] to [ON].
Be sure to set [JET NAVIGATOR] to [OFF] when you
want to delete all contents of a cassette that is
recorded while setting [JET NAVIGATOR] to [OFF] or is
recorded on another VCR. (See page 8.)
Through the AV1 (AUDIO IN/VIDEO IN) sockets.
Through the AV2 (AUDIO IN/VIDEO IN) sockets on
front panel.
• Use the L and R connectors for operations in the normal
(monaural) mode.
TIMER REC
2 Insert a cassette that you want to delete the cassette
contents.
REC/OTR
/ I
3 Press [MENU] (9) to display the Main menu on the
screen.
4 Press [43] (28) to select the
[TAPE REFRESH], and then press
the [ENTER] (26).
¢
TAPE REFRESH
START: ENTER
END:STOP
5 Press [ENTER] (26) for 2 seconds or more to start the
tape refresh function.
(1)
(1) Other VCR or Video movie
camera
¢ Audio Cable (Not supplied)
TAPE REFRESH
END:STOP
The tape is rewound to the beginning, and it is fast-forwarded
with the tape refresh function.
When the tape reaches the end, the VCR automatically
rewinds it to the beginning.
Note:
• When a video cassette with a broken off erasure prevention
tab is inserted, this function is not activated.
12
NV-HV61GH.book
13 ページ 2004年3月4日 木曜日 午前9時13分
9 Press [TIMER (REC)] (14) to switch the VCR over to
the timer recording standby mode.
• When [JET NAVIGATOR] is set to [ON] (see page 8), the
[PROGRAMME IS COMPLETE. REMAINING
PROGRAMME 49.]* message appears.
• When [JET NAVIGATOR] is set to [OFF] (see page 8),
the [PROGRAMME IS COMPLETE.]* message appears.
*
These messages will not appear if timer recording is started
immediately after [TIMER (REC)] (14) is pressed.
Timer Recording
Easy Timer Programming
Up to 16 timer programmes, including weekly and daily
programmes, can be recorded up to one month in advance by
setting the timer.
Preparations
• The VCR must be turned on, or in timer recording standby
mode.
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Insert a video cassette with an intact erasure prevention tab.
• Check that the clock is set to the correct time. If it has not
been set, refer to page 7.
• When [JET NAVIGATOR] is set to [ON] (See page 8), you
can set the category.
Alternatively, you can see the category on the Navigator list.
(See page 15 for details.)
To Suspend the Timer Recording Standby
Mode
When you want to use the VCR for playback, normal
recording or some other operation before the programmed
timer recording perform, you can temporarily suspend the
timer recording standby mode by pressing the [TIMER (REC)]
(14) so that the [ ] indication on the VCR display
disappears.
Operations
However, after you have finished using the VCR, be sure to
reactivate the timer recording standby mode by pressing the
[TIMER (REC)] (14) again otherwise the programmed timer
recording will not be performed.
In case of [JET NAVIGATOR] is set to [ON];
1 Press [PROG] (7) to display the menu for timer
programme on the TV screen.
2 Press [2 1] (28) to set the date
on which the TV programme will
be broadcast, and press [4] (28).
EASY PROGRAMMING
SELECT
1. DATE
2. CH
SET
:
3. ON TIME
:
4. OFF TIME
5. REC MODE SP
6. CATEGORY
TIMER
7. PUSH TIMER
END : MENU
Weekly and Daily Timer Recording
In step 2 of Easy Timer Programming, select the desired
day by pressing [2] (28).
Current date !# Weekly !# Daily !#
!# the day before one month ,···. Current date...
3 Press [2 1] (28) to select the programme position of
the desired TV station, and press [4] (28).
Weekly:
SU=Sunday, MO=Monday, TU=Tuesday, WE=Wednesday,
TH=Thursday, FR=Friday, SA=Saturday
4 Press [2 1] (28) to set the starting time, and press
[4] (28).
• When [2 1] (28) is kept pressed, the indication changes
in 30-minute steps.
Daily:
Daily recording
Monday to Friday
Monday to Saturday
Sunday to Saturday
5 Press [2 1] (28) to set the ending time, and press [4]
(28).
6 Press [2 1] (28) to set the desired Rec Mode, and
press [4] (28).
• SP provides standard recording
EASY PROGRAMMING
time, optimum picture and sound
1. DATE
29WE SELECT
2
2. CH
SET
quality.
3. ON TIME 20:02
4. OFF TIME 21:30
LP provides double recording time
5. REC MODE LP
6. CATEGORY
TIMER
with slightly reduced picture and
7. PUSH TIMER
END : MENU
sound quality.
EP provides triple recording time
with slightly reduced picture and sound quality.
Regarding the [A] indication, refer to page 14.
When you play back a tape recorded in the EP mode, the
monaural sound may be unstable.
7 Press [2 1] (28) to select the
Category. Then, select the
desired category by pressing
[43 2 1] (28).
• When [JET NAVIGATOR] is set to
[OFF] (See page 8), proceed to
step 9.
8 Press [MENU] (9) to make the
previous display appears.
VCR Display
M-F
M-S
S-S
For example, SU (Sunday)
EASY PROGRAMMING
SELECT
1. DATE
SU
2. CH
SET
:
3. ON TIME
:
4. OFF TIME
5. REC MODE SP
6. CATEGORY
TIMER
7. PUSH TIMER
END : MENU
Timer Recording from an External Signal
Source
If timer recording is performed by a
unit connected to the Audio/Video
input sockets, select the A1 or A2
indicator in step 3 of Easy Timer
Programming for the programme
position.
CATEGORY SETTING
≥MOVIE
≥MUSIC
≥DRAMA
≥EDUCA
≥DOCUM
On Screen Display
MO-FR
MO-SA
SU-SA
≥SPORT
≥CHILD
≥NEWS
≥OTHER
≥– – – – –
END : MENU
EASY PROGRAMMING
1. DATE
29WE SELECT
2
2. CH
SET
3. ON TIME 20:02
4. OFF TIME 21:30
5. REC MODE LP
6. CATEGORY
TIMER
7. PUSH TIMER
END : MENU
13
EASY PROGRAMMING
1. DATE
29WE SELECT
2. CH
SET
A2
:
3. ON TIME
:
4. OFF TIME
5. REC MODE SP
6. CATEGORY
TIMER
7. PUSH TIMER
END : MENU
NV-HV61GH.book
14 ページ 2004年3月4日 木曜日 午前9時13分
Setting other Programmes in Succession
Timer recording for the same programme
on the next week (Intelligent Timer)
Repeat steps 1-9 of Easy Timer Programming (page 13).
When you wish to set the timer recording for programmes
which will be recorded within 1 week and you have ever
recorded the programmes before, you can record them soon
with I-TIMER function without entering day and time by buttons.
Select the desired setting from the list of timer programme
recorded before. Please check the date and time carefully.
Programming a Timer Recording of a TV
Programme Until its End
(Rec Mode Auto Change Function)
If the VCR determines that the remaining tape time is
insufficient to record the programme to its end during a timer
recording performed in the SP mode, this function
automatically changes the Rec Mode to ensure that the whole
programme will be recorded.
Preparations
• The VCR must be turned on, or in timer recording standby
mode.
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Insert a video cassette with an intact erasure prevention tab.
The Rec Mode will change as follows:
PAL system:
SP # LP
NTSC system:
SP # EP
1 Press [I-TIMER] (24) to display the menu for Intelligent
Timer on the TV screen.
• The list of the timer programmes which are recorded
before appears.
• This function cannot change the recording mode to the
EP mode for PAL system.
Depending on the remaining tape length, recording may be
performed in the LP (EP) mode from the start. However, if the
remaining tape time is still not sufficient in this case, the
programme cannot be recorded to the end.
The tape length must be set correctly. (See page 8.)
Some tapes may not work correctly.
If the recording mode changes from SP to LP during a timer
recording, some brief picture distortion occurs at that point.
2 Press [43] (28) to select the
timer programme which you want
to record on the next week.
DAY
CH ON
OFF
SU
SU
SU
SA
FR
WE
4
14
25
2
2
5
19:55
16:00
11:00
21:30
21:30
23:30
19:10
15:00
10:30
20:02
20:02
22:15
EP
SP
A
SP
SP
EP
END
: [ENTER]
ENTER
END
: MENU
3 Press [ENTER] (26).
• The Timer Programme List screen
appears.
To Activate the Rec Mode Auto Change Function:
Press [REC MODE] (33) to select [A].
DATE
CH ON
15SA
15SA
16SU
2 10:30 11:00 SP
25 20:02 21:30 SP
25 10:30 11:00 A
:
:
:
:
:
:
:
:
:
:
4 Press [TIMER (REC)] (14) to
switch the VCR over to the timer
recording standby mode.
EASY PROGRAMMING
1. DATE
29WE SELECT
2
2. CH
SET
3. ON TIME 20:02
4. OFF TIME 21:30
5. REC MODE A
6. CATEGORY
TIMER
7. PUSH TIMER
END : MENU
OFF
SET : END
: [ENTER]
END
: MENU
Notes:
• Up to 16 I-Timer Programmes can be memorized.
• When I-Timer Programmes are increased to more than 16,
the oldest one is deleted.
• Every time you press [REC MODE] (33), the indication
changes in the following order:
To check and cancel a Timer Programme
Preparations
• The VCR must be turned on, or in timer recording standby
mode.
• Confirm that the TV is on and the VCR viewing channel is
selected.
SP # LP # EP # A # SP
1 Press [CHECK] (23) or [TIMER CHECK] (41).
• The Timer Programme List screen appears.
2 Press [CHECK] (23) or [TIMER CHECK] (41)
repeatedly to select the program.
• Every time you press [CHECK]
DATE CH ON
SU-SA 25 10:30
(23) or [TIMER CHECK] (41), the
SU
14 15:00
19WE
5 22:15
cursor shifts below.
23SA
2 20:02
• Press [1] (28) to display the
category. (When [JET
NAVIGATOR] is set to [ON].)
Press [1] (28) again to make
the previous display appear.
28FR
30SU
OFF
11:00
16:00
23:30
21:30
A2 18:02 19:30
4 19:10 19:55
:
:
A
SP
EP
SP
SP
EP
:
:
END
: MENU
SET : END
: [ENTER]
3 Press [CANCEL] (5) to cancel.
4 Press [MENU] (9) to exit the On Screen Display.
Notes:
• If timer recording is not completed (due to insufficient tape or
cancellation by the user), the programmed timer recording
data will be cancelled from the memory by 4 A.M two days
later.
However, if the timer recording function is activated at that
time, the programmed timer recording data will not be
cancelled.
• After you cancel the programmed timer recording data, the
current Rec Mode is displayed during the stop mode.
14
NV-HV61GH.book
15 ページ 2004年3月4日 木曜日 午前9時13分
To Delete the Jet Navigator Data of a
Single Video Cassette Tape
Search Functions
Keep [CANCEL] (5) pressed for more than 5 seconds while
the Jet Navigator list appears.
[ss] appears on the list.
See page 8 to delete all the Jet Navigator data stored in the
VCR memory.
Jet Navigator
This VCR can display a list of the recorded programmes on
the inserted video cassette on the TV screen. You can then
select the desired programme, and the VCR will quickly locate
its beginning and start playback.
Conditions for correct operation of the Jet Navigator function:
• The tape length of the inserted cassette must be set
correctly. (See page 8.)
• The VCR must not be in the timer recording standby mode.
• A programme at least 15 minutes must be recorded on the
tape.
Notes:
• The Jet Navigator list is stored in each cassette. Up to 20
cassettes and 50 programmes can be registered.
• Signals approximately 10 seconds before and after the
current tape position are checked. (During this checking,
[CHECKING JET NAVIGATOR DATA.] is displayed on the
TV screen.)
• Checking cannot be performed properly where there are no
signals such as at unrecorded portions of the tape. In this
case, press [NAVI] (25) at a portion of the tape where a
programme has been recorded of this VCR. This will allow
signal checking to be performed more reliably. When a
signal is still not found, [CAN NOT FIND JET NAVIGATOR
DATA.] is displayed on the TV and you cannot find the
beginning of the programme.
• [PROGRAMME IS COMPLETE. REMAINING
PROGRAMME 0. DELETE JET NAVIGATOR DATA.]
appears when you try to store more than 50 programmes.
The new item is added and the oldest item is deleted.
• When programmes equivalent to 20 cassettes are already
stored in memory, [REMAINING CASSETTE 0. FOR JET
NAVIGATOR.] is displayed after Jet Navigator data checking
is performed. Programmes recorded without deleting data
are not registered in the list.
• The list does not appear when playing tapes recorded on
other equipment.
• When recording over the same location on a tape, it may not
work correctly.
Preparations
• Display the VCR picture on the TV.
• Be sure to set [JET NAVIGATOR] to [ON] (see page 8) and
perform recording.
Operations
1 Press [NAVI] (25) to display the
NO.01 JET NAVIGATOR
DATE CH
ON CATEGORY
Jet Navigator list.
10/18
1
10:30 MUSIC
10/19 24
• Up to 14 programme data that have 1 0 / 2 1 5 21 25 :: 10 50 S P O R T
10/23 A2
20:02
been recorded are displayed on the 1 0 / 2 6 4 1 9 : 1 0 E D U C A
10/27
2
20:02
Jet Navigator list.
10/27 12
20:30
SELECT : NAVI,
END : MENU
(7 programme data for each page)
• When more than 14 programs have
been recorded in one cassette, the programme data are
deleted from the first one.
• When pressing [NAVI] (25) during playback, playback
stops and the Jet Navigator list appears.
2 Press [NAVI] (25) several times to select the
programme that you want to locate and play back.
After more than 3 seconds, the VCR starts to search
for the beginning of the selected programme and
playback starts automatically.
• Every time you press [NAVI] (25), the cursor shifts
above.
NO.01 JET NAVIGATOR
DATE CH
ON CATEGORY
10/18
1
10:30 MUSIC
10/19 24
1 5 : 0 0 SPO RT
10/21
5
22:15
20:02
1 0 / 2 3 A2
19:10 EDUCA
10/26
4
20:02
10/27
2
10/27 12
20:30
NO.01 JET NAVIGATOR
DATE CH
ON CATEGORY
10/18
1
10:30 MUSIC
1 0 / 1 9 24
1 5 :0 0 S P OR T
10/21
5
22:15
20:02
10/23 A2
1 9 :1 0 E D U C A
10/26
4
20:02
10/27
2
10/27 12
20:30
SELECT : NAVI,
SELECT : NAVI,
END : MENU
Confirming the cassette which includes a
programme you want to watch
(Jet Navigator Memory)
This allows you to search the cassette which you recorded the
programme you want to watch without inserting video
cassette tapes.
END : MENU
To Cancel the Jet Navigator list:
Press [MENU] (9).
Preparations
• Display the VCR picture on the TV.
• You can only search for cassettes recorded in timer
recording with setting [JET NAVIGATOR] to [ON] (See
page 8) on this VCR in the past.
To Set the Category
The category setting allows you to find
what kind of programmes are recorded
by the character and the icon
indications.
1 Press [MENU] (9) to display the Main menu on the TV
screen.
CATEGORY SETTING
≥MOVIE
≥MUSIC
≥DRAMA
≥EDUCA
≥DOCUM
≥SPORT
≥CHILD
≥NEWS
≥OTHER
≥– – – – –
2 Press [43] (28) to select [NAVI MEMORY 1*PROG.]
then press [ENTER] (26).
• NAVI MEMORY Screen appears.
NO.01 NAVI MEMORY
DATE CH ON
CATEGORY
• The programme list for 1 cassette
10/18
1 1 0 :3 0 M U S I C
is displayed per 1 screen.
• Up to 20 cassettes can be
selected on this VCR and
SELECT :
END : MENU
displayed on the NAVI MEMORY
Screen.
* The number of Jet Navigator Data memorized on this
VCR is displayed.
END : MENU
1 Press [1] (28) while the Jet
Navigator list appears. Then, select
the desired category by pressing [432 1] (28).
2 Press [MENU] (9).
Category
Indication
MOVIE
Icon
Category
Indication
MOVIE
SPORTS
SPORT
MUSIC
MUSIC
CHILDREN
CHILD
DRAMA
DRAMA
NEWS
NEWS
EDUCATION
EDUCA
OTHERS
OTHER
DOCUMENTARY
DOCUM
Icon
3 Press [2 1] (28).
• The display can be switched for each cassette
(programme list).
To Cancel the NAVI MEMORY Screen:
Press [MENU] (9).
15
NV-HV61GH.book
16 ページ 2004年3月4日 木曜日 午前9時13分
To Demonstrate the Jet Navigator Function
Keep [NAVI] (25) pressed for more
than 5 seconds without inserting a
cassette tape.
Notes:
• Searching in either direction is possible up to the 20th index
signal.
• If you press either of [INDEX] (13) too many times, simply
press the other [INDEX] (13) (indicating the opposite
direction) to correct it. In this way, you can reduce the
displayed figure down to 1.
• The figure on the VCR display decreases by 1 every time an
index signal is located.
NO.01 JET NAVIGATOR
DATE CH ON CATEGORY
1/10
2
8 :0 0 M U S I C
1/10
6 1 9 :0 0 S P O R T
1/10
4 2 1 :0 0 M O V I E
1/10
6 22:00 CHILD
DEMONSTRATION
SELECT : NAVI
END : MENU
To Cancel the Demonstration of Jet Navigator Function:
Press [MENU] (9).
Finding a Timer-recorded programme for
viewing (Easy Programme Playback)
To Check the Recorded Programming Data
(Time Stamp Function)
When playback starts after searching
with Jet Navigator function or index
search function, recorded programming
data (called Time Stamp) appears on
the TV screen for approx. 5 seconds.
CH 2 10/29. SA
Allows you to find a timer-recorded programme with Onetouch operation and to play it back easily.
ON 20:02
Preparation
Set timer recording for the programme you wish to view.
Operation
1 Press [PROG PLAY] (22).
• As soon as the timer-recorded programme is found,
playback starts automatically.
Note:
• Time Stamp does not appear if the beginning of the Jet
Navigator data is not recorded 10 minutes before and after
the current tape position even when index signals are
recorded.
PROG PLAY
2222
To Cancel the Easy Programme Playback:
Press [STOP] (12).
To Find the Beginning of Each Recording
(VHS Index Search System)
Notes:
• The VCR memorises the position at which timer recording is
set to the standby mode by pressing [TIMER (REC)] (14) as
the start point of Easy Programme Playback.
• If you take out the cassette after a timer recording has
finished, Easy Programme Playback function does not work.
This VCR automatically records special index signals on the
tape every time a recording is started. The Index search
function makes use of these index signals to let you find the
beginning of a desired programme quickly and easily.
Index signals are automatically recorded in the following
cases:
• When you start a recording by pressing [REC] (15) or [REC/
OTR] (38).
• When a timer recording starts.
• When you press [REC] (15) on the remote control during
recording.
Conditions for correct operation of the Index search
function:
• The VCR must be in the stop mode or in the playback mode.
• Each programme recorded on the tape must be at least
5 minutes long.
Preparations
• Display the VCR picture on the TV.
• Insert a recorded video cassette.
Operation
1 Press [INDEX] (13) (that corresponds to the direction
from the current tape position in which the desired
programme is located on the tape) to start the index
search.
For example, if you want to search for the 2nd
recorded programme in forward direction, press
[INDEX] (13) (L) twice.
• The VCR fast-forwards or rewinds the tape and searches
for the specified index signal (the beginning of the desired
recorded programme).
When it is found, playback starts automatically.
To Cancel the Index Search or to Stop Playback:
Press [STOP] (12).
16
NV-HV61GH.book
17 ページ 2004年3月4日 木曜日 午前9時13分
• The playback picture is distorted when record the tape in the
EP mode using MESECAM system.
#However, this is not a malfunction.
#We recommend PAL system for recording in the EP mode.
Recording will not operate correctly
The symptom description is indicated in brackets [ ].
Before Requesting Service
Message of On Screen Display
The error message is indicated in brackets [
].
[PLEASE PUT IN A VIDEO CASSETTE.]
• [REC/OTR] (38) ([REC] (15)) or [TIMER (REC)] (14) has
been pressed without a video cassette inserted.
#Insert a video cassette.
[The
indication flashes whenever recording is attempted.]
• The erasure prevention tab on the video cassette has been
broken off.
#Use a tape with an intact erasure prevention tab, or cover
the tab hole with adhesive tape, if the original recording is
no longer required.
[PLEASE STOP THE TAPE.]
• [TUNER PRESET] has been selected during playback.
#Stop the tape.
[The picture is recorded with noise or a blank screen.]
• The aerial or aerial cable is defective.
#Check the aerial connection to the VCR. See page 4.
#Check your normal TV picture. If there is no picture, check
your aerial.
• The VCR is not correctly tuned.
#Retune the VCR. See pages 5-6.
• A1 or A2 has been selected.
#Select the required TV programme.
[PLEASE SET THE CLOCK.]
• [TIMER (REC)] (14), [PROG] (7), [CHECK] (23) or
[TIMER CHECK] (41) has been pressed when the clock is
not set.
#Set the clock.
[PLEASE USE A CASSETTE WITH TAB.]
• [REC/OTR] (38), [REC] (15) or [TIMER (REC)] (14) has
been pressed with a video cassette without an erasure
prevention tab.
#Use a video cassette with an intact erasure prevention
tab.
[Timer recording cannot be performed.]
• The clock or calendar has been incorrectly set.
#Check the clock and calendar. Set them to the present
time. (Note that this is a 24-hour clock.)
See page 7.
• The recording starting or ending time setting is incorrect.
#Set the recording starting and ending time correctly.
• The VCR has not been set for timer recording.
#Press [TIMER (REC)] (14) after programming for timer
recording.
[NO TIMER RECORDING HAS BEEN SET.]
• [TIMER (REC)] (14) has been pressed with no timer
programmes.
#Set timer recording.
[VCR IS IN THE TIMER STANDBY MODE.]
• [VCR-ON/OFF] (1) has been pressed during the timer
standby mode.
#Press the [TIMER (REC)] (14) to release the VCR from
the timer standby mode.
[CAN NOT FIND PROG PLAY DATA.]
• [PROG PLAY] (22) has been pressed with no programmed
timer recording data.
#Set timer recording.
[AV external recordings cannot be made.]
• A1 or A2 has not been selected.
#Select A1 or A2 by pressing [INPUT SELECT] (6).
• External AV connections are incorrect.
#Check that the connections for external video and audio
sources are correct. See page 12.
The VCR will not operate correctly
The symptom description is indicated in brackets [
The remote control will not operate correctly
The symptom description is indicated in brackets [
].
[The remote control does not operate correctly.]
• The remote control transmitter beam is not reaching the
VCR.
#Ensure that the remote control is being pointed at the VCR
and that the transmitter beam is not obstructed.
• The distance is too far.
#Use the remote control within 7 m of the VCR.
• The batteries are exhausted.
#Replace the batteries. See the precautions for
replacement on page 2.
• The batteries are incorrectly fitted with (+/-) reversed.
#Fit the batteries correctly as shown on page 2.
• The remote controller signal sensor is exposed to strong light
source such as direct sunlight or inverted fluorescent light.
#Keep strong light source so far away from the remote
controller signal sensor as possible.
[The VCR display is not illuminated.]
• The mains lead has not been connected.
#Connect the mains lead to the mains supply.
[The VCR display is illuminated but the VCR will not operate.]
• The VCR is in the timer mode.
#Press the [TIMER (REC)] (14) to operate the VCR
manually.
• Safety devices are operating.
#Disconnect the mains lead and wait for 1 minute.
Reconnect the mains supply and check functions.
• Dew may have formed.
#Do not operate the VCR for 1 hour.
Playback will not operate correctly
The symptom description is indicated in brackets [
].
].
[The picture is noisy or is not in colour. Horizontal bars or lines
run down the screen.]
• Tracking is not correct.
#Adjust the tracking. See page 18.
• The TV has not been tuned to the VCR.
#Tune the TV to the VCR. See page 5.
• The video heads are clogged or worn.
#Consult your dealer for further advice.
• The playback picture is distorted when using an E300 type
video cassette that was recorded in the LP or EP mode.
#We recommend that you use video cassettes other than
type E300.
17
NV-HV61GH.book
18 ページ 2004年3月4日 木曜日 午前9時13分
During still playback, keep [TRACKING/V-LOCK] (20) _ or `
pressed until the picture stops shaking.
Crystal View Control
The crystal view control function ensures that you always
obtain the optimum picture quality so that you get the best
picture automatically.
Precautions:
• With certain TV models and tapes, it may not be possible to
adjust the tracking.
• If you play back a cassette that was recorded on another
VCR, the picture quality may be inferior and it may be
necessary to adjust the tracking. Also, on some TVs, the
picture may shake in the special playback functions.
However, these are not malfunctions.
Adjusting the Playback Picture
Under normal conditions, the VCR automatically adjusts the
playback picture for optimum quality. However, in some cases
it may be necessary to adjust it manually.
If the Picture Contains Noise Bars and It Is Not Clear to
See (Tracking adjustment):
If noise bars appear during normal playback, slow playback or
still playback, follow the operations below.
During normal or slow playback, press
[TRACKING/V-LOCK] (20) _ or `
until the bars noise disappear.
• If the noise bars appear during still
playback, switch the VCR over to the
slow playback mode and then adjust
the tracking as explained above.
To Return to Auto Tracking:
Press both [TRACKING/V-LOCK] (20)
_ and ` simultaneously.
Dirt on the video heads
If the video heads get dirty, pictures will not be recorded or
played back clearly.
(See the following conditions.)
TV screen
Normal picture
Small amount
of dirt
Large amount
of dirt
Playback picture
containing noise bars
If this happens, insert and eject a cassette 5-10 times
successively to remove the dirt from the video heads.
If the problem still persists after performing above, contact a
service personnel to request assistance.
If the Still Picture shaking (V-Lock Adjustment):
If the still picture shakes, perform the following operation.
Specifications
NV-HV61GH
Power Source:
Power Consumption:
110–240 V AC 50/60 Hz
13 W
AUDIO
Input Level:
Video Recording System:
2 rotary heads, helical scanning system
Video Heads:
4 heads
Audio Heads:
2 heads (Hi-Fi)
Tape Speed:
PAL
SP; 23.39 mm/s
LP; 11.7 mm/s
EP; 7.8 mm/s
NTSC SP; 33.3 mm/s
EP; 11.1 mm/s
Tape Format:
VHS tape
Record/Playback Time:
PAL
SP; 240 min with NV-E240
PAL
LP; 480 min with NV-E240
PAL
EP; 720 min with NV-E240
FF/REW Time:
Approx. 60 s with NV-E180 (FF/REW)
Approx. 43 s with NV-E180 (Jet Rewind)
AUDIO IN (PHONO); j6 dBV,
more than 47 kohm
Output Level: AUDIO OUT (PHONO); j6 dBV,
less than 1 kohm
Audio Track:
1 track (Normal-mono only), 2 channels
(Hi-Fi sound-stereo)
Video Horizontal Resolution:
Colour; more than 240 lines (SP)
Signal-to-Noise Ratio:
Video; more than 43 dB (SP)
Audio; more than 65 dB (Hi-Fi)
Dynamic Range: Audio; more than 90 dB (Hi-Fi audio track)
Audio Frequency Response:
20 Hz–20 kHz/Hi-Fi
Wow and Flutter: 0.005% Wrms/Hi-Fi
Operating Temperature:
5oC–40oC
Operating Humidity:
35%–80%
Mass:
3 kg
Dimensions:
430 (W) a 89 (H) a 227 (D) mm
Standard Accessories:
1 pc. AC Mains Lead
1 pc. RF Coaxial cable
1 pc. Remote Control
2 pcs. R6 size batteries
1 pc. Audio/Video cable
VIDEO
Television System:
CCIR; 625 lines, 50 fields, PAL colour signal
EIA; 525 lines, 60 fields, NTSC colour signal
Modulation System:
Luminance; FM azimuth recording
Colour signal; converted subcarrier phase
shift recording
Input Level:
VIDEO IN (PHONO);1.0 Vp-p,75 ohm,
terminated
Output Level:
VIDEO OUT (PHONO);1.0 Vp-p,75 ohm,
terminated
RF Modulate; UHF Channel
E21–E69 75 ohm
Mass and dimensions shown are approximate.
Specifications are subject to change without notice.
18

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement